AI Art Is Real Art

AI Art Is Real Art — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

Internet Security Awareness Training

Internet Security Awareness Training (ISAT) is the training given to members of an organization regarding the protection of various information assets of that organization. ISAT is a subset of general security awareness training (SAT). Even small and medium enterprises are generally recommended to provide such training, but organizations that need to comply with government regulations (e.g., the Gramm–Leach–Bliley Act, the Payment Card Industry Data Security Standard, Health Insurance Portability and Accountability Act, Sarbanes–Oxley Act) normally require formal ISAT for annually for all employees. Often such training is provided in the form of online courses. ISAT, also referred to as Security Education, Training, and Awareness (SETA), organizations train and create awareness of information security management within their environment. It is beneficial to organizations when employees are well trained and feel empowered to take important actions to protect themselves and organizational data. The SETA program target must be based on user roles within organizations and for positions that expose the organizations to increased risk levels, specialized courses must be required. == Coverage == There are general topics to cover for the training, but it is necessary for each organization to have a coverage strategy based on its needs, as this will ensure the training is practical and captures critical topics relevant to the organization. As the threat landscape changes very frequently, organizations should continuously review their training programs to ensure relevance with current trends. Topics covered in ISAT include: Appropriate methods for protecting sensitive information on personal computer systems, including password policy Various computer security concerns, including spam, malware, phishing, social engineering, etc. Consequences of failure to properly protect information, including potential job loss, economic consequences to the firm, damage to individuals whose private records are divulged, and possible civil and criminal law penalties. Being Internet Security Aware means you understand that there are people actively trying to steal data that is stored within your organization's computers. (This often focuses on user names and passwords, so that criminal elements can ultimately get access to bank accounts and other high-value IT assets.) That is why it is important to protect the assets of the organization and stop that from happening. The general scope should include topics such as password security, Email phishing, Social engineering, Mobile device security, Sensitive data security, and Business communications. In contrast, those requiring specialized knowledge are usually required to take technical and in-depth training courses. Suppose an organization determines that it is best to use one of the available training tools on the market, it must ensure it sets objectives that the training can meet, including confirming the training will provide employees with the knowledge to understand risks and the behaviors needed in managing them, actions to take to prevent or detect security incidents, using language easily understandable by the trainees, and ensuring the pricing is reasonable. Organizations are recommended to base ISAT training content on employee roles and their culture; the policy should guide that training for all employees and gave the following as examples of sources of reference materials: National Institute of Standards and Technology (NIST) Special Publication 800-50, Building an Information Technology Security Awareness and Training Program International Standards Organization (ISO) 27002:2013, Information technology—Security techniques—Code of practice for information security controls International Standards Organization (ISO) 27001:2013, Information technology — Security techniques — Information security management systems COBIT 5 Appendix F.2, Detailed Guidance: Services, Infrastructure and Applications Enabler, Security Awareness The training must focus on current threats specific to an organization and the impacts if that materializes as a result of user actions. Including practical examples and ways of dealing with scenarios help users know the appropriate measures to take. It is a good practice to periodically train customers of specific organizations on threats they face from people with malicious intentions. Coverage strategy for SAT should be driven by an organization's policy. It can help truly determine the level of depth of the training and where it should be conducted at a global level or business unit level, or a combination of both. A policy also empowers a responsible party within the organization to run the training. == Importance == Studies show that well-structured security awareness training can significantly reduce the likelihood of cyber incidents caused by human error. According to the Ponemon Institute, organizations that implement regular security training experience up to 70% fewer successful phishing attacks. Additionally, a 2023 Verizon Data Breach Investigations Report found that 74% of breaches involve the human element, highlighting the need for continuous education. Employees are key in whether organizations are breached or not; there must be a policy on creating awareness and training them on emerging threats and actions to take in safeguarding sensitive information and reporting any observed unusual activity within the corporate environment. Research has shown that SAT has helped reduce cyber-attacks within organizations, especially when it comes to phishing, as trainees learned to identify these attack modes and give them the self-assurance to take action appropriately. There is an increase in phishing attacks, and it has become increasingly important for people to understand how to these attacks work, and the actions required to prevent these and SAT has shown a significant impact on the number of successful phishing attacks against organizations. == Compliance Requirements == Various regulations and laws mandate SAT for organizations in specific industries, including the Gramm–Leach–Bliley Act (GLBA) for the financial services, the Federal Information Security Modernization Act of 2014 for federal agencies, and the European Union's General Data Protection Regulation (GDPR). === Federal Information Security Modernization Act === Employees and contractors in federal agencies are required to receive Security Awareness Training annually, and the program needs to address job-related information security risks linked that provide them with the knowledge to lessen security risks. === Health Insurance Portability and Accountability Act === The Health Insurance Portability and Accountability Act has the Security Rule, and Privacy Rule requiring the creation of a security awareness training program and ensuring employees are trained accordingly. === Payment Card Industry Data Security Standard === The Payment Card Industry Security Standards Council, the governing council for stakeholders in the payment industry, formed by American Express, Discover, JCB International, MasterCard, and Visa that developed the DSS as a requirement for the payment industry. Requirement 12.6 requires member organizations to institute a formal security awareness program. There is a published guide for organizations to adhere to when setting up the program. === US States Training Regulations === Some States mandate Security Awareness Training whiles other do not but simply recommend voluntary training. Among states that require the training for its employees include: Colorado (The Colorado Information Security Act, Colorado Revised Statutes 24-37.5-401 et seq.) Connecticut (13 FAM 301.1-1 Cyber Security Awareness Training (PS800)) Florida (Florida Statutes Chapter 282) Georgia (Executive Order GA E.O.182 mandated training within 90 days of issue) Illinois (Cook County) Indiana (IN H 1240) Louisiana (Louisiana Division of Administration, Office of Technology Services p. 52: LA H 633) Maryland (20-07 IT Security Policy) Montana (Mandatory cyber training for executive branch state employees) Nebraska Nevada (agency-by-agency state employee requirement - State Security Standard 123 – IT Security) New Hampshire New Jersey ( NJ A 1654) North Carolina Ohio (IT-15 - Security Awareness and Training) Pennsylvania Texas Utah Vermont Virginia West Virginia (WV Code Section 5A-6-4a) == Training Techniques == Below are some common training techniques, even though some can be blended depending on the operating environment: Interactive video training – This technique allows users to be trained using two-way interactive audio and video instruction. Web-based training – This method allows employees or users to take the training independently and usually has a testing component to determine if learning has taken place. If not, users can be allowed to retake the course and test to ensure there is a complete understanding
Read more →
Flat-panel display

A flat-panel display (FPD) is an electronic display used to display visual content such as text or images. It is present in consumer, medical, transportation, and industrial equipment. Flat-panel displays are thin, lightweight, provide better linearity and are capable of higher resolution and contrast than typical consumer-grade TVs from earlier eras. They are usually less than 10 centimetres (3.9 in) thick. While the highest resolution for consumer-grade CRT televisions is 1080i, many interactive flat panels in the 2020s are capable of 1080p and 4K resolution. In the 2010s, portable consumer electronics such as laptops, mobile phones, and portable cameras have used flat-panel displays since they consume less power and are lightweight. As of 2016, flat-panel displays have almost completely replaced CRT displays. Most 2010s-era flat-panel displays use LCD or light-emitting diode (LED) technologies, sometimes combined. Most LCD screens are back-lit with color filters used to display colors. In many cases, flat-panel displays are combined with touch screen technology, which allows the user to interact with the display in a natural manner. For example, modern smartphone displays often use OLED panels, with capacitive touch screens. Flat-panel displays can be divided into two display device categories: volatile and static. The former requires that pixels be periodically electronically refreshed to retain their state (e.g. liquid-crystal displays (LCD)), and can only show an image when it has power. On the other hand, static flat-panel displays rely on materials whose color states are bistable, such as displays that make use of e-ink technology, and as such retain content even when power is removed. == History == The first engineering proposal for a flat-panel TV was by General Electric in 1954 as a result of its work on radar monitors. The publication of their findings gave all the basics of future flat-panel TVs and monitors. But GE did not continue with the R&D required and never built a working flat panel at that time. The first production flat-panel display was the Aiken tube, developed in the early 1950s and produced in limited numbers in 1958. This saw some use in military systems as a heads up display and as an oscilloscope monitor, but conventional technologies overtook its development. Attempts to commercialize the system for home television use ran into continued problems and the system was never released commercially. Dennis Gabor, better known as the inventor of holography, patented a flat-screen CRT in 1958. This was substantially similar to Aiken's concept, and led to a years-long patent battle. By the time the lawsuits were complete, with Aiken's patent applying in the US and Gabor's in the UK, the commercial aspects had long lapsed, and the two became friends. Around this time, Clive Sinclair came across Gabor's work and began an ultimately unsuccessful decade-long effort to commercialize it. The Philco Predicta featured a relatively flat (for its day) cathode-ray tube setup and would be the first commercially released "flat panel" upon its launch in 1958; the Predicta was a commercial failure. The plasma display panel was invented in 1964 at the University of Illinois, according to The History of Plasma Display Panels. === Liquid-crystal displays (LC displays, or LCDs) === The MOSFET (metal–oxide–semiconductor field-effect transistor, or MOS transistor) was invented by Mohamed M. Atalla and Dawon Kahng at Bell Labs in 1959, and presented in 1960. Building on their work, Paul K. Weimer at RCA developed the thin-film transistor (TFT) in 1962. It was a type of MOSFET distinct from the standard bulk MOSFET. The idea of a TFT-based LCD was conceived by Bernard J. Lechner of RCA Laboratories in 1968. B.J. Lechner, F.J. Marlowe, E.O. Nester and J. Tults demonstrated the concept in 1968 with a dynamic scattering LCD that used standard discrete MOSFETs. The first active-matrix addressed electroluminescent display was made using TFTs by T. Peter Brody's Thin-Film Devices department at Westinghouse Electric Corporation in 1968. In 1973, Brody, J. A. Asars and G. D. Dixon at Westinghouse Research Laboratories demonstrated the first thin-film-transistor liquid-crystal display. Brody and Fang-Chen Luo demonstrated the first flat active-matrix liquid-crystal display (AM LCD) using TFTs in 1974. By 1982, pocket LCD TVs based on LCD technology were developed in Japan. The 2.1-inch Epson ET-10 Epson Elf was the first color LCD pocket TV, released in 1984. In 1988, a Sharp research team led by engineer T. Nagayasu demonstrated a 14-inch full-color LCD, which convinced the electronics industry that LCD would eventually replace CRTs as the standard television display technology. As of 2013, all modern high-resolution and high-quality electronic visual display devices use TFT-based active-matrix displays. === LED displays === The first usable LED display was developed by Hewlett-Packard (HP) and introduced in 1968. It was the result of research and development (R&D) on practical LED technology between 1962 and 1968, by a research team under Howard C. Borden, Gerald P. Pighini, and Mohamed M. Atalla, at HP Associates and HP Labs. In February 1969, they introduced the HP Model 5082-7000 Numeric Indicator. It was the first alphanumeric LED display, and was a revolution in digital display technology, replacing the Nixie tube for numeric displays and becoming the basis for later LED displays. In 1977, James P Mitchell prototyped and later demonstrated what was perhaps the earliest monochromatic flat-panel LED television display. Ching W. Tang and Steven Van Slyke at Eastman Kodak built the first practical organic LED (OLED) device in 1987. In 2003, Hynix produced an organic EL driver capable of lighting in 4,096 colors. In 2004, the Sony Qualia 005 was the first LED-backlit LCD. The Sony XEL-1, released in 2007, was the first OLED television. == Common types == === Liquid-crystal display (LCD) === Field-effect LCDs are lightweight, compact, portable, cheap, more reliable, and easier on the eyes than CRT screens. LCD screens use a thin layer of liquid crystal, a liquid that exhibits crystalline properties. It is sandwiched between two glass plates carrying transparent electrodes. Two polarizing films are placed at each side of the LCD. By generating a controlled electric field between electrodes, various segments or pixels of the liquid crystal can be activated, causing changes in their polarizing properties. These polarizing properties depend on the alignment of the liquid-crystal layer and the specific field-effect used, being either twisted nematic (TN), in-plane switching (IPS) or vertical alignment (VA). Color is produced by applying appropriate color filters (red, green and blue) to the individual subpixels. LC displays are used in various electronics like watches, calculators, mobile phones, TVs, computer monitors and laptops screens etc. === LED-LCD === Most earlier large LCD screens were back-lit using a number of CCFL (cold-cathode fluorescent lamps). However, small pocket size devices almost always used LEDs as their illumination source. With the improvement of LEDs, almost all new displays are now equipped with LED backlight technology. The image is still generated by the LCD layer. === Plasma panel === A plasma display consists of two glass plates separated by a thin gap filled with a gas such as neon. Each of these plates has several parallel electrodes running across it. The electrodes on the two plates are at right angles to each other. A voltage applied between the two electrodes one on each plate causes a small segment of gas at the two electrodes to glow. The glow of gas segments is maintained by a lower voltage that is continuously applied to all electrodes. By 2010, consumer plasma displays had been discontinued by numerous manufacturers. === Electroluminescent panel === In an electroluminescent display, the image is created by applying electrical signals to the plates which make the phosphor glow. === Organic light-emitting diode === An OLED (organic light-emitting diode) is a light-emitting diode (LED) in which the emissive electroluminescent layer is a film of organic compound which emits light in response to an electric current. This layer of organic semiconductor is situated between two electrodes; typically, at least one of these electrodes is transparent. OLEDs are used to create digital displays in devices such as television screens, computer monitors, portable systems such as mobile phones, handheld game consoles and PDAs. === Quantum-dot light-emitting diode === QLED or quantum dot LED is a flat panel display technology introduced by Samsung under this trademark. Other television set manufacturers such as Sony have used the same technology to enhance the backlighting of LCD TVs already in 2013. Quantum dots create their own unique light when illuminated by a light source of shorter wavelength such as blue LEDs. Th
Read more →
Vacuum tube characteristics

Vacuum tube characteristics (also called tube curves, valve characteristics or valve curves) describes the electrical relationships between electrode voltages and currents in a vacuum tube. These relationships are commonly presented as characteristic curves in tube manuals and engineering references. The curves typically show plate current versus plate voltage for several fixed control-grid voltages, showing how current varies with electrode potentials under controlled conditions. Designers use them to select operating points, determine voltage gain, estimate output power, and construct graphical load-line analyses. The use of characteristic curves as an engineering tool for analyzing vacuum-tube operation was established in the 1910s, notably in work by Edwin Howard Armstrong. Examples of such curves appear in early tube manuals and textbooks and form the basis of classical vacuum-tube circuit design. Different types of vacuum tubes are characterized using plots appropriate to their electrode structure and intended use. Two-electrode devices such as diodes are described primarily by the relation between plate voltage and plate current. Amplifying tubes containing control grids, such as triodes, tetrodes, pentodes, and beam tetrodes, are represented by families of curves measured for different grid voltages. From these families additional parameters such as amplification factor (μ), transconductance (gm), and plate resistance (rp) may be obtained. Although these plots are used primarily for circuit design, their shapes arise from the underlying physics of electron flow in vacuum tubes. The physical principles responsible for the observed characteristics are discussed in later sections. == 3/2 power law == In high-vacuum thermionic diodes operating under normal conditions, plate current increases nonlinearly with plate voltage. Over the space-charge-limited region, the current is well approximated by the three-halves power relation I p = P ⋅ V p 3 / 2 {\displaystyle I_{p}=P\cdot V_{p}^{3/2}} where P {\displaystyle P} is the perveance of the tube. Perveance is determined primarily by electrode geometry, including cathode area and cathode-to-plate spacing. It provides a practical measure of current-producing capability and is often used in tube manuals in place of a complete family of plate-characteristic curves. == Signal diode characterization == For small-signal diodes, tube manuals typically publish a single static anode characteristic showing anode current (Ia) as a function of anode voltage (Va), measured with the heater operating at its rated voltage. Because the diode contains no control grid, only one such I–V curve is required. The low-voltage portion of the curve is particularly important in detector service, where the nonlinear curvature of the current–voltage relation allows a small alternating signal to produce a net direct-current output, resulting in rectification. In addition to the static characteristic, tube manuals specify heater ratings, maximum plate voltage, permissible average current, and interelectrode capacitance. These parameters define the allowable operating region and high-frequency behavior. Another typical data sheet for a diode is for the Philips EB91 double diode. This book includes curves of the diode response in use as a detector. The output voltage is non-zero for an input voltage of 0 due to the Edison effect. == Rectifier characterization == Vacuum-tube rectifiers intended for power-supply service are specified differently from signal diodes. Their data emphasize heater requirements, peak inverse voltage, maximum peak plate current, permissible DC output current for various filter configurations, and regulation characteristics. Rectifier tubes exhibit nonlinear voltage drop that increases with current. For limited operating ranges this behavior may be represented by an equivalent or effective series resistance corresponding to the local slope of the plate characteristic (dynamic plate resistance, dV/dI). Diode voltages can be determied by use of a graphical aide. In capacitor-input supplies, conduction occurs in pulses near the peaks of the AC waveform, producing peak currents substantially greater than the average DC load current. Data sheets therefore specify maximum peak plate current and permissible filter capacitance in addition to average DC ratings. Under varying load conditions, the supply voltage changes in accordance with the rectifier's nonlinear characteristic and effective impedance. == Triode characterization == === Early use === The systematic use of characteristic curves to explain and quantify vacuum-tube amplification was introduced by Edwin Howard Armstrong in 1914. Using measured plate voltage-current curves, Armstrong demonstrated the mechanism of triode amplification and clarified the operation of grid-leak detection. ==== Plate and transfer characteristics ==== Triode data sheets present families of plate characteristics showing plate current I p {\displaystyle I_{p}} as a function of plate voltage E p {\displaystyle E_{p}} for several fixed grid voltages E g {\displaystyle E_{g}} . From these curves the operating point, voltage gain, and load-line behavior may be determined graphically. In normal operation, plate current depends on both grid and plate voltage. Classical analysis shows that the characteristics for different grid voltages are similar in form and differ primarily by horizontal displacement. In triodes, plate current may be approximated by I p = k ( E g + E p μ ) 3 / 2 {\displaystyle I_{p}=k\left(E_{g}+{\frac {E_{p}}{\mu }}\right)^{3/2}} where E g {\displaystyle E_{g}} is the grid voltage, E p {\displaystyle E_{p}} the plate voltage, μ {\displaystyle \mu } the amplification factor, and k {\displaystyle k} a constant determined by the tube geometry.. The amplification factor μ represents the relative effectiveness of grid voltage compared with plate voltage in controlling current. It is fundamentally determined by structural dimensions, particularly grid-to-cathode spacing relative to plate-to-cathode spacing. ==== Small-signal parameters ==== Triodes are commonly characterized by three interrelated small-signal parameters: Amplification factor ( μ {\displaystyle \mu } ) — the change in plate voltage divided by the change in grid voltage at constant plate current: μ = ( ∂ E p ∂ E g ) I p {\displaystyle \mu =\left({\frac {\partial E_{p}}{\partial E_{g}}}\right)_{I_{p}}} Transconductance ( g m {\displaystyle g_{m}} ) — the change in plate current divided by the change in grid voltage at constant plate voltage: g m = ( ∂ I p ∂ E g ) E p {\displaystyle g_{m}=\left({\frac {\partial I_{p}}{\partial E_{g}}}\right)_{E_{p}}} Plate resistance ( r p {\displaystyle r_{p}} ) — the change in plate voltage divided by the change in plate current at constant grid voltage: r p = ( ∂ E p ∂ I p ) E g {\displaystyle r_{p}=\left({\frac {\partial E_{p}}{\partial I_{p}}}\right)_{E_{g}}} These parameters are related by μ = g m r p {\displaystyle \mu =g_{m}r_{p}} as shown in classical tube theory treatments. These parameters are obtained either from slopes of the characteristic curves or from tabulated operating-point data. ==== Comparison of ECC81, ECC82, and ECC83 ==== The ECC81, ECC82, and ECC83 (also known respectively as 12AT7, 12AU7, and 12AX7) are closely related dual triodes widely used in small-signal amplifier stages. Although similar in construction and envelope size, they differ significantly in electrical parameters due to differences in electrode spacing and grid structure. (Data representative of manufacturer specifications.) The ECC83 exhibits high μ {\displaystyle \mu } and high plate resistance, producing large voltage gain but relatively low current drive capability. The ECC82 has lower μ {\displaystyle \mu } and lower plate resistance, allowing greater current delivery and reduced voltage gain. The ECC81 occupies an intermediate position with comparatively high transconductance and moderate amplification factor. These differences arise primarily from variations in grid pitch, cathode area, and electrode spacing, which determine perveance and amplification factor. Although the external envelope is similar, the internal geometry governs the characteristic curves and small-signal parameters. == Tetrode (screen-grid) characterization == The screen-grid tube (tetrode) was developed primarily to reduce the electrostatic coupling between plate and control grid that limited gain and stability in radio-frequency triode amplifiers. In triodes, the grid–plate capacitance provides feedback from plate to grid, restricting obtainable gain and often requiring neutralization circuits such as those used in neutrodyne receivers. By inserting a positively biased screen grid between control grid and plate, this capacitive coupling is greatly reduced, permitting higher stable gain at radio frequencies. The screen grid, also known as the shield grid or grid 2 (to distinguish it from t
Read more →
List of video games using NFC

This is a list of video games that use near field communication (NFC) technology. Currently, games have leveraged NFC in unlocking additional features through payment. This takes the form of a direct transaction over NFC or by purchasing a physical item, which signals to the platform that a certain set of features has been purchased (e.g. Skylanders). This list catalogues gaming NFC platforms by device. == Mobile == === Android === Gun Bros. Near Field Ninja NFC Cards Skylanders, with an NFC base. The Haunted House: Soul Fighters, with an NFC base. === iOS === ==== As item-triggered game enhancement ==== Skylanders, with an NFC base. ==== As payment ==== In-App Purchases Here, games that leverage Apple's In-App Purchase framework use information stored in the NFC Secure Element to process the purchase through Apple Pay. While an NFC radio is not used here, the NFC protocol is used nonetheless. == Console == === Nintendo Wii, Wii U, Switch, Switch 2, 3DS and 2DS === ==== As item-triggered game enhancement ==== Pokémon Rumble U NFC Figure Amiibo, built into Nintendo consoles since 2014. Works with Wii U, New Nintendo 3DS/3DS XL, New Nintendo 2DS XL, Nintendo Switch, Nintendo Switch 2 and older Nintendo 3DS/Nintendo 2DS systems via a peripheral device. Disney Infinity, with an NFC base. Works with Wii, Nintendo 3DS, Nintendo 2DS and Wii U. Lego Dimensions, with an NFC base. Works with Wii U. Skylanders, with an NFC base. Works with Wii, Nintendo 3DS, Nintendo 2DS and Wii U. The Nintendo Switch version of Skylanders: Imaginators uses the NFC built into the game controller, it is also has full backward compatibility with Nintendo Switch 2. Some functionalities are missing compared to the other versions. ==== As payment ==== The Wii U GamePad controller, Joy-Con R, Joy-Con 2 R, Nintendo Switch Pro Controller and Nintendo Switch 2 Pro Controller can read information from an NFC data source. === PlayStation === Disney Infinity, with an NFC base. Works with PlayStation 3, PlayStation Vita, PlayStation 4 and PlayStation 5. Lego Dimensions, with an NFC base. Works with PlayStation 3, PlayStation 4 and PlayStation 5. Skylanders, with an NFC base. Works with PlayStation 3, PlayStation 4 and PlayStation 5. === Xbox === While NFC bases are normally interoperable between all platforms, the Xbox 360, Xbox One and Xbox Series X require specific bases that are compatible only with the respective platform. Disney Infinity, with an NFC base. Lego Dimensions, with an NFC base. Skylanders, with an NFC base.
Read more →
Avizo (software)

Avizo (pronounce: 'a-VEE-zo') is a general-purpose commercial software application for scientific and industrial data visualization and analysis. Avizo is developed by Thermo Fisher Scientific and was originally designed and developed by the Visualization and Data Analysis Group at Zuse Institute Berlin (ZIB) under the name Amira. Avizo was commercially released in November 2007. For the history of its development, see the Wikipedia article about Amira. == Overview == Avizo is a software application which enables users to perform interactive visualization and computation on 3D data sets. The Avizo interface is modelled on the visual programming. Users manipulate data and module components, organized in an interactive graph representation (called Pool), or in a Tree view. Data and modules can be interactively connected together, and controlled with several parameters, creating a visual processing network whose output is displayed in a 3D viewer. With this interface, complex data can be interactively explored and analyzed by applying a controlled sequence of computation and display processes resulting in a meaningful visual representation and associated derived data. == Application areas == Avizo has been designed to support different types of applications and workflows from 2D and 3D image data processing to simulations. It is a versatile and customizable visualization tool used in many fields: Scientific visualization Materials Research Tomography, Microscopy, etc. Nondestructive testing, Industrial Inspection, and Visual Inspection Computer-aided Engineering and simulation data post-processing Porous medium analysis Civil Engineering Seismic Exploration, Reservoir Engineering, Microseismic Monitoring, Borehole Imaging Geology, Digital Rock Physics (DRP), Earth Sciences Archaeology Food technology and agricultural science Physics, Chemistry Climatology, Oceanography, Environmental Studies Astrophysics == Features == Data import: 2D and 3D image stack and volume data: from microscopes (electron, optical), X-ray tomography (CT, micro-/nano-CT, synchrotron), neutron tomography and other acquisition devices (MRI, radiography, GPR) Geometric models (such as point sets, line sets, surfaces, grids) Numerical simulation data (such as Computational fluid dynamics or Finite element analysis data) Molecular data Time series and animations Seismic data Well logs 4D Multivariate Climate Models 2D/3D data visualization: Volume rendering Digital Volume Correlation Visualization of sections, through various slicing and clipping methods Isosurface rendering Polygonal meshes Scalar fields, Vector fields, Tensor representations, Flow visualization (Illuminated Streamlines, Stream Ribbons) Image processing: 2D/3D Alignment of image slices, Image registration Image filtering Mathematical Morphology (erode, dilate, open, close, tophat) Watershed Transform, Distance Transform Image segmentation 3D models reconstruction: Polygonal surface generation from segmented objects Generation of tetrahedral grids Surface reconstruction from point clouds Skeletonization (reconstruction of dendritic, porous or fracture network) Surface model simplification Quantification and analysis: Measurements and statistics Analysis spreadsheet and charting Material properties computation, based on 3D images: Absolute permeability Thermal conductivity Molecular diffusivity Electrical resistivity/formation factor 3D image-based meshing for CFD and FEA: From 3D imaging modalities (CT, micro-CT, MRI, etc.) Surface and volume meshes generation Export to FEA and CFD solvers for simulation Post-processing for simulation analysis Presentation, automation: MovieMaker, Multiscreen, Video wall, collaboration, and VR support TCL Scripting, C++ extension API Avizo is based on Open Inventor 3D graphics toolkits (FEI Visualization Sciences Group).
Read more →
Spintronics

Spintronics (a portmanteau of spin transport electronics), also known as spin electronics, is the study of the intrinsic spin of the electron and its associated magnetic moment, in addition to its fundamental electronic charge, in solid-state devices. The field of spintronics concerns spin-charge coupling in metallic systems. The analogous effects in insulators fall into the field of multiferroics. Spintronics fundamentally differs from traditional electronics in that, in addition to charge state, electron spins are used as a further degree of freedom, with implications in the efficiency of data storage and transfer. Spintronic systems are most often realised in dilute magnetic semiconductors (DMS) and Heusler alloys and are of particular interest in the field of quantum computing, such as atomtronics computation. == History == Spintronics emerged from discoveries in the 1980s concerning spin-dependent electron transport phenomena in solid-state devices. This includes the observation of spin-polarized electron injection from a ferromagnetic metal to a normal metal by Johnson and Silsbee (1985) and the discovery of giant magnetoresistance independently by Albert Fert et al. and Peter Grünberg et al. (1988). The origin of spintronics can be traced to the ferromagnet/superconductor tunneling experiments pioneered by Meservey and Tedrow and initial experiments on magnetic tunnel junctions by Julliere in the 1970s. The use of semiconductors for spintronics began with the theoretical proposal of a spin field-effect-transistor by Datta and Das in 1990 and of the electric dipole spin resonance by Rashba in 1960. In 2012, persistent spin helices of synchronized electrons were made to persist for more than a nanosecond, a 30-fold increase over earlier efforts, and longer than the duration of a modern processor clock cycle. In 2025, at 60 K (−213.2 °C; −351.7 °F) crystalline nickel(II) iodide (NiI2) was reported to exhibit p-wave magnetism, in which the spins of nickel atoms became arranged in a spiral pattern in two orientations. The orientations can be switched via a small electrical current. Applied in digital devices, this spintronics behavior requires far less current than the conventional charge-based electronics that powers devices such as computers and phones. == Theory == The spin of the electron is an intrinsic angular momentum that is separate from the angular momentum due to its orbital motion. The magnitude of the projection of the electron's spin along an arbitrary axis is 1 2 ℏ {\displaystyle {\tfrac {1}{2}}\hbar } , implying that the electron acts as a fermion by the spin-statistics theorem. Like orbital angular momentum, the spin has an associated magnetic moment, the magnitude of which is expressed as μ = 3 2 q m e ℏ {\displaystyle \mu ={\tfrac {\sqrt {3}}{2}}{\frac {q}{m_{e}}}\hbar } . In a solid, the spins of many electrons can act together to affect the magnetic and electronic properties of a material, for example endowing it with a permanent magnetic moment as in a ferromagnet. In many materials, electron spins are equally present in both the up and the down state, and no transport properties are dependent on spin. A spintronic device requires generation or manipulation of a spin-polarized population of electrons, resulting in an excess of spin up or spin down electrons. The polarization of any spin dependent property X can be written as P X = X ↑ − X ↓ X ↑ + X ↓ {\displaystyle P_{X}={\frac {X_{\uparrow }-X_{\downarrow }}{X_{\uparrow }+X_{\downarrow }}}} . A net spin polarization can be achieved either through creating an equilibrium energy split between spin up and spin down. Methods include putting a material in a large magnetic field (Zeeman effect), the exchange energy present in a ferromagnet or forcing the system out of equilibrium. The period of time that such a non-equilibrium population can be maintained is known as the spin lifetime, τ {\displaystyle \tau } . In a diffusive conductor, a spin diffusion length λ {\displaystyle \lambda } can be defined as the distance over which a non-equilibrium spin population can propagate. Spin lifetimes of conduction electrons in metals are relatively short (typically less than 1 nanosecond). An important research area is devoted to extending this lifetime to technologically relevant timescales. The mechanisms of decay for a spin polarized population can be broadly classified as spin-flip scattering and spin dephasing. Spin-flip scattering is a process inside a solid that does not conserve spin, and can therefore switch an incoming spin up state into an outgoing spin down state. Spin dephasing is the process wherein a population of electrons with a common spin state becomes less polarized over time due to different rates of electron spin precession. In confined structures, spin dephasing can be suppressed, leading to spin lifetimes of milliseconds in semiconductor quantum dots at low temperatures. Superconductors can enhance central effects in spintronics such as magnetoresistance effects, spin lifetimes and dissipationless spin-currents. The simplest method of generating a spin-polarised current in a metal is to pass the current through a ferromagnetic material. The most common applications of this effect involve giant magnetoresistance (GMR) devices. A typical GMR device consists of at least two layers of ferromagnetic materials separated by a spacer layer. When the two magnetization vectors of the ferromagnetic layers are aligned, the electrical resistance will be lower (so a higher current flows at constant voltage) than if the ferromagnetic layers are anti-aligned. This constitutes a magnetic field sensor. Two variants of GMR have been applied in devices: Current-in-plane (CIP), where the electric current flows parallel to the layers and, Current-perpendicular-to-plane (CPP), where the electric current flows in a direction perpendicular to the layers. Other metal-based spintronics devices: Tunnel magnetoresistance (TMR), where CPP transport is achieved by using quantum-mechanical tunneling of electrons through a thin insulator separating ferromagnetic layers. Spin-transfer torque, where a current of spin-polarized electrons is used to control the magnetization direction of ferromagnetic electrodes in the device. Spin-wave logic devices carry information in the phase. Interference and spin-wave scattering can perform logic operations. == Device types == === Spintronic-logic === Non-volatile spin-logic devices to enable scaling are being extensively studied. Spin-transfer, torque-based logic devices that use spins and magnets for information processing have been proposed. These devices are part of the ITRS exploratory road map. Logic-in memory applications are already in the development stage. A 2017 review article can be found in Materials Today. A generalized circuit theory for spintronic integrated circuits has been proposed so that the physics of spin transport can be utilized by SPICE developers and subsequently by circuit and system designers for the exploration of spintronics for "beyond CMOS computing". === Semiconductor === Doped semiconductor materials display dilute ferromagnetism. In recent years, dilute magnetic oxides (DMOs) including ZnO based DMOs and TiO2-based DMOs have been the subject of numerous experimental and computational investigations. N`0 sources (like manganese-doped gallium arsenide (Ga,Mn)As), increase the interface resistance with a tunnel barrier, or using hot-electron injection. Spin detection in semiconductors has been addressed with multiple techniques: Faraday/Kerr rotation of transmitted/reflected photons Circular polarization analysis of electroluminescence Nonlocal spin valve (adapted from Johnson and Silsbee's work with metals) Ballistic spin filtering The latter technique was used to overcome the lack of spin-orbit interaction and materials issues to achieve spin transport in silicon. Because external magnetic fields (and stray fields from magnetic contacts) can cause large Hall effects and magnetoresistance in semiconductors (which mimic spin-valve effects), the only conclusive evidence of spin transport in semiconductors is demonstration of spin precession and dephasing in a magnetic field non-collinear to the injected spin orientation, called the Hanle effect. === Storage media === Antiferromagnetic storage media have been studied as an alternative to ferromagnetism, especially since with antiferromagnetic material the bits can be stored as well as with ferromagnetic material. Instead of the usual definition 0 ↔ 'magnetisation upwards', 1 ↔ 'magnetisation downwards', the states can be, e.g., 0 ↔ 'vertically alternating spin configuration' and 1 ↔ 'horizontally-alternating spin configuration'.). The main advantages of antiferromagnetic material are: insensitivity to data-damaging perturbations by stray fields due to zero net external magnetization; no effect on near particles, implying that antiferromagnetic device elements wo
Read more →
List of video games using NFC

This is a list of video games that use near field communication (NFC) technology. Currently, games have leveraged NFC in unlocking additional features through payment. This takes the form of a direct transaction over NFC or by purchasing a physical item, which signals to the platform that a certain set of features has been purchased (e.g. Skylanders). This list catalogues gaming NFC platforms by device. == Mobile == === Android === Gun Bros. Near Field Ninja NFC Cards Skylanders, with an NFC base. The Haunted House: Soul Fighters, with an NFC base. === iOS === ==== As item-triggered game enhancement ==== Skylanders, with an NFC base. ==== As payment ==== In-App Purchases Here, games that leverage Apple's In-App Purchase framework use information stored in the NFC Secure Element to process the purchase through Apple Pay. While an NFC radio is not used here, the NFC protocol is used nonetheless. == Console == === Nintendo Wii, Wii U, Switch, Switch 2, 3DS and 2DS === ==== As item-triggered game enhancement ==== Pokémon Rumble U NFC Figure Amiibo, built into Nintendo consoles since 2014. Works with Wii U, New Nintendo 3DS/3DS XL, New Nintendo 2DS XL, Nintendo Switch, Nintendo Switch 2 and older Nintendo 3DS/Nintendo 2DS systems via a peripheral device. Disney Infinity, with an NFC base. Works with Wii, Nintendo 3DS, Nintendo 2DS and Wii U. Lego Dimensions, with an NFC base. Works with Wii U. Skylanders, with an NFC base. Works with Wii, Nintendo 3DS, Nintendo 2DS and Wii U. The Nintendo Switch version of Skylanders: Imaginators uses the NFC built into the game controller, it is also has full backward compatibility with Nintendo Switch 2. Some functionalities are missing compared to the other versions. ==== As payment ==== The Wii U GamePad controller, Joy-Con R, Joy-Con 2 R, Nintendo Switch Pro Controller and Nintendo Switch 2 Pro Controller can read information from an NFC data source. === PlayStation === Disney Infinity, with an NFC base. Works with PlayStation 3, PlayStation Vita, PlayStation 4 and PlayStation 5. Lego Dimensions, with an NFC base. Works with PlayStation 3, PlayStation 4 and PlayStation 5. Skylanders, with an NFC base. Works with PlayStation 3, PlayStation 4 and PlayStation 5. === Xbox === While NFC bases are normally interoperable between all platforms, the Xbox 360, Xbox One and Xbox Series X require specific bases that are compatible only with the respective platform. Disney Infinity, with an NFC base. Lego Dimensions, with an NFC base. Skylanders, with an NFC base.
Read more →
Open Sound Control

Open Sound Control (OSC) is a protocol for networking sound synthesizers, computers, and other multimedia devices for purposes such as musical performance or show control. OSC's advantages include interoperability, accuracy, flexibility and enhanced organization and documentation. Its disadvantages include higher bandwidth requirements, increased load on embedded processors, and lack of standardized messages/interoperability. The first specification was released in March 2002. == Motivation == OSC is a content format developed at CNMAT by Adrian Freed and Matt Wright comparable to XML, WDDX, or JSON. It was originally intended for sharing music performance data (gestures, parameters and note sequences) between musical instruments (especially electronic musical instruments such as synthesizers), computers, and other multimedia devices. OSC is sometimes used as an alternative to the 1983 MIDI standard, when higher resolution and a richer parameter space is desired. OSC messages are transported across the internet and within local subnets using UDP/IP and Ethernet. OSC messages between gestural controllers are usually transmitted over serial endpoints of USB wrapped in the SLIP protocol. == Features == OSC's main features, compared to MIDI, include: Open-ended, dynamic, URI-style symbolic naming scheme Symbolic and high-resolution numeric data Pattern matching language to specify multiple recipients of a single message High resolution time tags "Bundles" of messages whose effects must occur simultaneously == Applications == There are dozens of OSC applications, including real-time sound and media processing environments, web interactivity tools, software synthesizers, programming languages and hardware devices. OSC has achieved wide use in fields including musical expression, robotics, video performance interfaces, distributed music systems and inter-process communication. The TUIO community standard for tangible interfaces such as multitouch is built on top of OSC. Similarly the GDIF system for representing gestures integrates OSC. OSC is used extensively in experimental musical controllers, and has been built into several open source and commercial products. The Open Sound World (OSW) music programming language is designed around OSC messaging. OSC is the heart of the DSSI plugin API, an evolution of the LADSPA API, in order to make the eventual GUI interact with the core of the plugin via messaging the plugin host. LADSPA and DSSI are APIs dedicated to audio effects and synthesizers. In 2007, a standardized namespace within OSC called SYN, for communication between controllers, synthesizers and hosts, was proposed. == Design == OSC messages consist of an address pattern (such as /oscillator/4/frequency), a type tag string (such as ,fi for a float32 argument followed by an int32 argument), and the arguments themselves (which may include a time tag). Address patterns form a hierarchical name space, reminiscent of a Unix filesystem path, or a URL, and refer to "Methods" inside the server, which are invoked with the attached arguments. Type tag strings are a compact string representation of the argument types. Arguments are represented in binary form with four-byte alignment. The core types supported are 32-bit two's complement signed integers 32-bit IEEE floating point numbers Null-terminated arrays of eight-bit encoded data (C-style strings) arbitrary sized blob (e.g. audio data, or a video frame) An example message is included in the spec (with null padding bytes represented by ␀): /oscillator/4/frequency␀,f␀␀, Followed by the 4-byte float32 representation of 440.0: 0x43dc0000. Messages may be combined into bundles, which themselves may be combined into bundles, etc. Each bundle contains a timestamp, which determines whether the server should respond immediately or at some point in the future. Applications commonly employ extensions to this core set. More recently some of these extensions such as a compact Boolean type were integrated into the required core types of OSC 1.1. The advantages of OSC over MIDI are primarily internet connectivity; data type resolution; and the comparative ease of specifying a symbolic path, as opposed to specifying all connections as seven-bit numbers with seven-bit or fourteen-bit data types. This human-readability has the disadvantage of being inefficient to transmit and more difficult to parse by embedded firmware, however. The spec does not define any particular OSC Methods or OSC Containers. All messages are implementation-defined and vary from server to server.
Read more →
ELIZA

ELIZA is an early natural language processing computer program developed from 1964 to 1967 at MIT by Joseph Weizenbaum. Created to explore communication between humans and machines, ELIZA simulated conversation by using a pattern matching and substitution methodology that gave users an illusion of understanding on the part of the program, but gave no response that could be considered really understanding what was being said by either party. Whereas the ELIZA program itself was written (originally) in MAD-SLIP, the pattern matching directives that contained most of its language capability were provided in separate "scripts", represented in a Lisp-like expression. The most famous script, DOCTOR, simulated a psychotherapist of the Rogerian school (in which the therapist often reflects back the patient's words to the patient), and used rules, dictated in the script, to respond with non-directional questions to user inputs. As such, ELIZA was one of the first chatbots (originally "chatterbots") and one of the first programs capable of attempting the Turing test. Weizenbaum intended the program as a method to explore communication between humans and machines. He was surprised that some people, including his secretary, attributed human-like feelings to the computer program, a phenomenon that came to be called the ELIZA effect. Many academics believed that the program would be able to positively influence the lives of many people, particularly those with psychological issues, and that it could aid doctors working on such patients' treatment. While ELIZA was capable of engaging in discourse, it could not converse with true understanding. However, many early users were convinced of ELIZA's intelligence and understanding, despite Weizenbaum's insistence to the contrary. The original ELIZA source code had been missing since its creation in the 1960s, as it was not common to publish articles that included source code at that time. However, more recently the MAD-SLIP source code was discovered in the MIT archives and published on various platforms, such as the Internet Archive. The source code is of high historical interest since it demonstrates not only the specificity of programming languages and techniques at that time, but also the beginning of software layering and abstraction as a means of achieving sophisticated software programming. == Overview == Joseph Weizenbaum's ELIZA, running the DOCTOR script, created a conversational interaction somewhat similar to what might take place in the office of "a [non-directive] psychotherapist in an initial psychiatric interview" and to "demonstrate that the communication between man and machine was superficial". While ELIZA is best known for acting in the manner of a psychotherapist, the speech patterns are due to the data and instructions supplied by the DOCTOR script. ELIZA itself examined the text for keywords, applied values to said keywords, and transformed the input into an output; the script that ELIZA ran determined the keywords, set the values of keywords, and set the rules of transformation for the output. Weizenbaum chose to make the DOCTOR script in the context of psychotherapy to "sidestep the problem of giving the program a data base of real-world knowledge", allowing it to reflect back the patient's statements to carry the conversation forward. The result was a somewhat intelligent-seeming response that reportedly deceived some early users of the program. Weizenbaum named his program ELIZA after Eliza Doolittle, a working-class character in George Bernard Shaw's Pygmalion (also appearing in the musical My Fair Lady, which was based on the play and was hugely popular at the time). According to Weizenbaum, ELIZA's ability to be "incrementally improved" by various users made it similar to Eliza Doolittle, since Eliza Doolittle was taught to speak with an upper-class accent in Shaw's play. However, unlike the human character in Shaw's play, ELIZA is incapable of learning new patterns of speech or new words through interaction alone. Edits must be made directly to ELIZA's active script in order to change the manner by which the program operates. Weizenbaum first implemented ELIZA in his own SLIP list-processing language, where, depending upon the initial entries by the user, the illusion of human intelligence could appear, or be dispelled through several interchanges. Some of ELIZA's responses were so convincing that Weizenbaum and several others have anecdotes of users becoming emotionally attached to the program, occasionally forgetting that they were conversing with a computer. Weizenbaum's own secretary reportedly asked Weizenbaum to leave the room so that she and ELIZA could have a real conversation. Weizenbaum was surprised by this, later writing: "I had not realized ... that extremely short exposures to a relatively simple computer program could induce powerful delusional thinking in quite normal people." In 1966, interactive computing (via a teletype) was new. It was 11 years before the personal computer became familiar to the general public, and three decades before most people encountered attempts at natural language processing in Internet services like Ask.com or PC help systems such as Microsoft Office Clippit. Although those programs included years of research and work, ELIZA remains a milestone because it was the first time a programmer had attempted such a human-machine interaction with the goal of creating the illusion (however brief) of human–human interaction. At the ICCC 1972, ELIZA was brought together with another early artificial-intelligence program named PARRY for a computer-only conversation. While ELIZA was built to speak as a doctor, PARRY was intended to simulate a patient with schizophrenia. == Design and implementation == Weizenbaum originally wrote ELIZA in MAD-SLIP for CTSS on an IBM 7094 as a program to make natural-language conversation possible with a computer. To accomplish this, Weizenbaum identified five "fundamental technical problems" for ELIZA to overcome: the identification of key words, the discovery of a minimal context, the choice of appropriate transformations, the generation of responses in the absence of key words, and the provision of an editing capability for ELIZA scripts. Weizenbaum solved these problems and made ELIZA such that it had no built-in contextual framework or universe of discourse. However, this required ELIZA to have a script of instructions on how to respond to inputs from users. ELIZA starts its process of responding to an input by a user by first examining the text input for a "keyword". A "keyword" is a word designated as important by the acting ELIZA script, which assigns to each keyword a precedence number, or a RANK, designed by the programmer. If such words are found, they are put into a "keystack", with the keyword of the highest RANK at the top. The input sentence is then manipulated and transformed as the rule associated with the keyword of the highest RANK directs. For example, when the DOCTOR script encounters words such as "alike" or "same", it would output a message pertaining to similarity, in this case "In what way?", as these words had high precedence number. This also demonstrates how certain words, as dictated by the script, can be manipulated regardless of contextual considerations, such as switching first-person pronouns and second-person pronouns and vice versa, as these too had high precedence numbers. Such words with high precedence numbers are deemed superior to conversational patterns and are treated independently of contextual patterns. Following the first examination, the next step of the process is to apply an appropriate transformation rule, which includes two parts: the "decomposition rule" and the "reassembly rule". First, the input is reviewed for syntactical patterns in order to establish the minimal context necessary to respond. Using the keywords and other nearby words from the input, different disassembly rules are tested until an appropriate pattern is found. Using the script's rules, the sentence is then "dismantled" and arranged into sections of the component parts as the "decomposition rule for the highest-ranking keyword" dictates. The example that Weizenbaum gives is the input "You are very helpful", which is transformed to "I are very helpful". This is then broken into (1) empty (2) "I" (3) "are" (4) "very helpful". The decomposition rule has broken the phrase into four small segments that contain both the keywords and the information in the sentence. The decomposition rule then designates a particular reassembly rule, or set of reassembly rules, to follow when reconstructing the sentence. The reassembly rule takes the fragments of the input that the decomposition rule had created, rearranges them, and adds in programmed words to create a response. Using Weizenbaum's example previously stated, such a reassembly rule would take the fragments and apply them to the phrase "What makes
Read more →
W3C Device Description Working Group

The W3C Device Description Working Group (DDWG), operating as part of the World Wide Web Consortium (W3C) Mobile Web Initiative (MWI), was chartered to "foster the provision and access to device descriptions that can be used in support of Web-enabled applications that provide an appropriate user experience on mobile devices." Mobile devices exhibit the greatest diversity of capabilities, and therefore present the greatest challenge to content adaptation technologies. The group published several documents, including a list of requirements for an interface to a Device Description Repository (DDR) and a standard interface meeting those requirements. The group was rechartered in 2006 to work in public towards the development of the Application Programming Interface (API) for a DDR. Early in 2007, the group launched a wiki and a blog to add to the public mailing list. The group subsequently published a formal vocabulary of core device properties, and an API called the DDR Simple API, which became a W3C Recommendation in December 2008. The group closed at the end of 2008, but with the intention of maintaining the Web pages, blog and wiki through W3C volunteer effort. == Publications == The DDWG published several W3C Working Group Notes and one W3C Recommendation. A W3C WG Note that articulates what the W3C and other organizations are doing or have already done with regard to device information. This document suggests an environment in which these technologies work together to meet the goals of content adaptation. The completed document was published on 31 October 2007. A W3C WG Note describing the ecosystem surrounding creation, maintenance and use of device descriptions. The completed document was published on 31 October 2007. A W3C WG Note describing a set of requirements for a reference repository of device descriptions. The completed document was published on 17 December 2007. A W3C WG Note describing a process to manage contributions to an initial core vocabulary, identification of key device properties, a formal initial core vocabulary and the identification of a maintainer for the core vocabulary. The details were contained in the Working Group Note describing the DDWG Core Vocabulary published on 14 April 2008. A W3C WG Note defining useful grouping and structure patterns in device descriptions. The Device Description Structures document was published as a Working Draft on 5 December 2008. The intention is that this document will be future input to other W3C groups. A W3C Recommendation defining a language-neutral programming interface to a Device Description Repository. The DDR Simple API was published on 5 December 2008. There is the possibility of future publications on the DDWG wiki describing implementations of the API in various languages, including Java, IDL, WSDL, C# etc. Much of the DDWG's material was developed in public via the DDWG Wiki and through their public mailing lists.
Read more →
Digital exhibition

Digital Exhibition includes both the projection technologies, such as High Definition, and delivery technologies of a film to a movie theater. Delivery technologies include disk drives, satellite relay, and fiber optics. This can save money in distribution but is usually more expensive overall due to maintenance and standardization of technology. However, there are benefits to digital exhibition, for example it requires less assembly by the exhibitor and can contain the trailers that the distributor wishes.
Read more →
Line splice

In electrical engineering and telecommunications, a line splice is a joint directly connecting lengths of electrical cables (electrical splice) or optical fibers (optical splice). The splices are often protected by sleeves. == Splicing of copper wires == The splicing of copper wires happens in the following steps: The cores are laid one above the other at the junction. The core insulation is removed. The wires are wrapped two to three times around each other (twisting). The bare veins on a length of about 3 cm "strangle" or "twist". In some cases, the strangulation is soldered. To isolate the splice, an insulating sleeve made of paper or plastic is pushed over it. The splicing of copper wires is mainly used on paper insulated wires. LSA techniques (LSA: soldering, screwing and stripping free) are used to connect copper wires, making the copper wires faster and easier to connect. LSA techniques include: Wire connection sleeves (AVH = Adernverbindungshülsen) and other crimp connectors. The two wires to be connected are inserted into the AVH without being stripped, which is then compressed with special pliers. The about 2 cm long AVH consist of contact, pressure and insulation. For wire connection strips (AVL = Adernverbindungsleisten) several pairs of wires (10 = AVL10 or 20 = AVL20) are inserted, the strip is then closed with a lid and pressed together with a hydraulic press, which ensures the connection. == Splicing of glass fibers == Fiber-optic cables are spliced using a special arc-splicer, with installation cables connected at their ends to respective "pigtails" - short individual fibers with fiber-optic connectors at one end. The splicer precisely adjusts the light-guiding cores of the two ends of the glass fibers to be spliced. The adjustment is done fully automatically in modern devices, whereas in older models this is carried out manually by means of micrometer screws and microscope. An experienced splicer can precisely position the fiber ends within a few seconds. Subsequently, the fibers are fused together (welded) with an electric arc. Since no additional material is added, such as gas welding or soldering, this is called a "fusion splice". Depending on the quality of the splicing process, attenuation values at the splice points are achieved by 0.3 dB, with good splices also below 0.02 dB. For newer generation devices, alignment is done automatically by motors. Here one differentiates core and jacket centering. At core centering (usually single-mode fibers), the fiber cores are aligned. A possible core offset with respect to the jacket is corrected. In the jacket centering (usually in multimode fibers), the fibers are adjusted to each other by means of electronic image processing in front of the splice. When working with good equipment, the damping value is according to experience at max. 0.1 dB. Measurements are made by means of special measuring devices including optical time-domain reflectometry (OTDR). A good splice should have an attenuation of less than 0.3 dB over the entire distance. Finished fiber optic splices are housed in splice boxes. One differentiates: Fusion splice Adhesive splicing Crimp splice or NENP (no-epoxy no-polish), mechanical splice
Read more →
TalkBack

TalkBack is an accessibility service for the Android operating system that helps blind and visually impaired users to interact with their devices. It uses spoken words, vibration and other audible feedback to allow the user to know what is happening on the screen allowing the user to better interact with their device. The service is pre-installed on many Android devices, and it became part of the Android Accessibility Suite in 2017. According to the Google Play Store, the Android Accessibility Suite has been downloaded over five billion times, including devices that have the suite preinstalled. == Open-source == Google releases the source code of TalkBack with some releases of the accessibility service to GitHub, with the latest of these changes being from May 6, 2021. The source for these versions of Google TalkBack have been released under the Apache License version 2.0. == Release history ==
Read more →
Flapit

Flapit is a split-flap display that reveals real-time social media statistics such as Twitter followers or Yelp ratings. The product is designed to show off a bricks-and-mortar company's online community and increase its online presence by letting offline customers interact with the connected counter. The idea came from a product launched by the retailer C&A called the Fashion Like. The device can be customised via a web app and API to display any promotional messages, internal stats or discounts. It has 7 digits including numbers, letters and currency symbols Special messages such as Thank You or Like Us can be displayed on the first flap and are translated into Italian, German, French, Chinese, Japanese, Russian, Portuguese, Spanish and English. The Flapit counter was officially presented to the press at the CES Las Vegas 2015 and received favorable reviews from major specialised press
Read more →
Active networking

Active networking is a communication pattern that allows packets flowing through a telecommunications network to dynamically modify the operation of the network. Active network architecture is composed of execution environments (similar to a unix shell that can execute active packets), a node operating system capable of supporting one or more execution environments. It also consists of active hardware, capable of routing or switching as well as executing code within active packets. This differs from the traditional network architecture which seeks robustness and stability by attempting to remove complexity and the ability to change its fundamental operation from underlying network components. Network processors are one means of implementing active networking concepts. Active networks have also been implemented as overlay networks. == What does it offer? == Active networking allows the possibility of highly tailored and rapid "real-time" changes to the underlying network operation. This enables such ideas as sending code along with packets of information allowing the data to change its form (code) to match the channel characteristics. The smallest program that can generate a sequence of data can be found in the definition of Kolmogorov complexity. The use of real-time genetic algorithms within the network to compose network services is also enabled by active networking. == How it relates to other networking paradigms == Active networking relates to other networking paradigms primarily based upon how computing and communication are partitioned in the architecture. === Active networking and software-defined networking === Active networking is an approach to network architecture with in-network programmability. The name derives from a comparison with network approaches advocating minimization of in-network processing, based on design advice such as the "end-to-end argument". Two major approaches were conceived: programmable network elements ("switches") and capsules, a programmability approach that places computation within packets traveling through the network. Treating packets as programs later became known as "active packets". Software-defined networking decouples the system that makes decisions about where traffic is sent (the control plane) from the underlying systems that forward traffic to the selected destination (the data plane). The concept of a programmable control plane originated at the University of Cambridge in the Systems Research Group, where (using virtual circuit identifiers available in Asynchronous Transfer Mode switches) multiple virtual control planes were made available on a single physical switch. Control Plane Technologies (CPT) was founded to commercialize this concept. == Fundamental challenges == Active network research addresses the nature of how best to incorporate extremely dynamic capability within networks. In order to do this, active network research must address the problem of optimally allocating computation versus communication within communication networks. A similar problem related to the compression of code as a measure of complexity is addressed via algorithmic information theory. One of the challenges of active networking has been the inability of information theory to mathematically model the active network paradigm and enable active network engineering. This is due to the active nature of the network in which communication packets contain code that dynamically change the operation of the network. Fundamental advances in information theory are required in order to understand such networks. == Nanoscale active networks == As the limit in reduction of transistor size is reached with current technology, active networking concepts are being explored as a more efficient means accomplishing computation and communication. More on this can be found in nanoscale networking.
Read more →