AI Art Modifier

AI Art Modifier — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

Control engineering

Control engineering, also known as control systems engineering and, in some European countries, automation engineering, is an engineering discipline that deals with control systems, applying control theory to design equipment and systems with desired behaviors in control environments. The discipline of controls overlaps and is usually taught along with electrical engineering, chemical engineering and mechanical engineering at many institutions around the world. The practice uses sensors and detectors to measure the output performance of the process being controlled; these measurements are used to provide corrective feedback helping to achieve the desired performance. Systems designed to perform without requiring human input are called automatic control systems (such as cruise control for regulating the speed of a car). Multi-disciplinary in nature, control systems engineering activities focus on implementation of control systems mainly derived by mathematical modeling of a diverse range of systems. == Overview == Modern day control engineering is a relatively new field of study that gained significant attention during the 20th century with the advancement of technology. It can be broadly defined or classified as practical application of control theory. Control engineering plays an essential role in a wide range of control systems, from simple household washing machines to high-performance fighter aircraft. It seeks to understand physical systems, using mathematical modelling, in terms of inputs, outputs and various components with different behaviors; to use control system design tools to develop controllers for those systems; and to implement controllers in physical systems employing available technology. A system can be mechanical, electrical, fluid, chemical, financial or biological, and its mathematical modelling, analysis and controller design uses control theory in one or many of the time, frequency and complex-s domains, depending on the nature of the design problem. Control engineering is the engineering discipline that focuses on the modeling of a diverse range of dynamic systems (e.g. mechanical systems) and the design of controllers that will cause these systems to behave in the desired manner. Although such controllers need not be electrical, many are and hence control engineering is often viewed as a subfield of electrical engineering. Electrical circuits, digital signal processors and microcontrollers can all be used to implement control systems. Control engineering has a wide range of applications from the flight and propulsion systems of commercial airliners to the cruise control present in many modern automobiles. In most cases, control engineers utilize feedback when designing control systems. This is often accomplished using a proportional–integral–derivative controller (PID controller) system. For example, in an automobile with cruise control the vehicle's speed is continuously monitored and fed back to the system, which adjusts the motor's torque accordingly. Where there is regular feedback, control theory can be used to determine how the system responds to such feedback. In practically all such systems stability is important and control theory can help ensure stability is achieved. Although feedback is an important aspect of control engineering, control engineers may also work on the control of systems without feedback. This is known as open loop control. A classic example of open loop control is a washing machine that runs through a pre-determined cycle without the use of sensors. == History == Automatic control systems were first developed over two thousand years ago. The first feedback control device on record is thought to be the ancient Ktesibios's water clock in Alexandria, Egypt, around the third century BCE. It kept time by regulating the water level in a vessel and, therefore, the water flow from that vessel. This certainly was a successful device as water clocks of similar design were still being made in Baghdad when the Mongols captured the city in 1258 CE. A variety of automatic devices have been used over the centuries to accomplish useful tasks or simply just to entertain. The latter includes the automata, popular in Europe in the 17th and 18th centuries, featuring dancing figures that would repeat the same task over and over again; these automata are examples of open-loop control. Milestones among feedback, or "closed-loop" automatic control devices, include the temperature regulator of a furnace attributed to Drebbel, circa 1620, and the centrifugal flyball governor used for regulating the speed of steam engines by James Watt in 1788. In his 1868 paper "On Governors", James Clerk Maxwell was able to explain instabilities exhibited by the flyball governor using differential equations to describe the control system. This demonstrated the importance and usefulness of mathematical models and methods in understanding complex phenomena, and it signaled the beginning of mathematical control and systems theory. Elements of control theory had appeared earlier but not as dramatically and convincingly as in Maxwell's analysis. Control theory made significant strides over the next century. New mathematical techniques, as well as advances in electronic and computer technologies, made it possible to control significantly more complex dynamical systems than the original flyball governor could stabilize. New mathematical techniques included developments in optimal control in the 1950s and 1960s followed by progress in stochastic, robust, adaptive, nonlinear control methods in the 1970s and 1980s. Applications of control methodology have helped to make possible space travel and communication satellites, safer and more efficient aircraft, cleaner automobile engines, and cleaner and more efficient chemical processes. Before it emerged as a unique discipline, control engineering was practiced as a part of mechanical engineering and control theory was studied as a part of electrical engineering since electrical circuits can often be easily described using control theory techniques. In the first control relationships, a current output was represented by a voltage control input. However, not having adequate technology to implement electrical control systems, designers were left with the option of less efficient and slow responding mechanical systems. A very effective mechanical controller that is still widely used in some hydro plants is the governor. Later on, previous to modern power electronics, process control systems for industrial applications were devised by mechanical engineers using pneumatic and hydraulic control devices, many of which are still in use today. === Mathematical modelling === David Quinn Mayne, (1930–2024) was among the early developers of a rigorous mathematical method for analysing Model predictive control algorithms (MPC). It is currently used in tens of thousands of applications and is a core part of the advanced control technology by hundreds of process control producers. MPC's major strength is its capacity to deal with nonlinearities and hard constraints in a simple and intuitive fashion. His work underpins a class of algorithms that are probably correct, heuristically explainable, and yield control system designs which meet practically important objectives. == Control systems == == Control theory == == Education == At many universities around the world, control engineering courses are taught primarily in electrical engineering and mechanical engineering, but some courses can be instructed in mechatronics engineering, and aerospace engineering. In others, control engineering is connected to computer science, as most control techniques today are implemented through computers, often as embedded systems (as in the automotive field). The field of control within chemical engineering is often known as process control. It deals primarily with the control of variables in a chemical process in a plant. It is taught as part of the undergraduate curriculum of any chemical engineering program and employs many of the same principles in control engineering. Other engineering disciplines also overlap with control engineering as it can be applied to any system for which a suitable model can be derived. However, specialised control engineering departments do exist, for example, in Italy there are several master in Automation & Robotics that are fully specialised in Control engineering or the Department of Automatic Control and Systems Engineering at the University of Sheffield or the Department of Robotics and Control Engineering at the United States Naval Academy and the Department of Control and Automation Engineering at the Istanbul Technical University. Control engineering has diversified applications that include science, finance management, and even human behavior. Students of control engineering may start with a linear control system course dealing with the time and complex-s domain, which req
Read more →
Influence-for-hire

Influence-for-hire or collective influence, refers to the economy that has emerged around buying and selling influence on social media platforms. == Overview == Companies that engage in the influence-for-hire industry range from content farms to high-end public relations agencies. Traditionally influence operations have largely been confined to public sector actors like intelligence agencies, in the influence-for-hire industry the groups conduction the operations are private with commerce being their primary consideration. However many of the clients in the influence-for-hire industry are countries or countries acting through proxies. They are often located in countries with less expensive digital labor. == History == In May 2021, Facebook took a Ukrainian influence-for-hire network offline. Facebook attributed the network to organizations and consultants linked to Ukrainian politicians including Andriy Derkach. During the COVID-19 pandemic state sponsored misinformation was spread through influence-for-hire networks. In August 2021, a report published by the Australian Strategic Policy Institute implicated the Chinese government and the ruling Chinese Communist Party in campaigns of online manipulation conducted against Australia and Taiwan using influence-for-hire.
Read more →
HTTP compression

HTTP compression is a capability that can be built into web servers and web clients to improve transfer speed and bandwidth utilization. HTTP data is compressed before it is sent from the server: compliant browsers will announce what methods are supported to the server before downloading the correct format; browsers that do not support compliant compression method will download uncompressed data. The most common compression schemes include gzip and Brotli; a full list of available schemes is maintained by the IANA. There are two different ways compression can be done in HTTP. At a lower level, a Transfer-Encoding header field may indicate the payload of an HTTP message is compressed. At a higher level, a Content-Encoding header field may indicate that a resource being transferred, cached, or otherwise referenced is compressed. Compression using Content-Encoding is more widely supported than Transfer-Encoding, and some browsers do not advertise support for Transfer-Encoding compression to avoid triggering bugs in servers. == Compression scheme negotiation == The negotiation is done in two steps, described in RFC 2616 and RFC 9110: 1. The web client advertises which compression schemes it supports by including a list of tokens in the HTTP request. For Content-Encoding, the list is in a field called Accept-Encoding; for Transfer-Encoding, the field is called TE. 2. If the server supports one or more compression schemes, the outgoing data may be compressed by one or more methods supported by both parties. If this is the case, the server will add a Content-Encoding or Transfer-Encoding field in the HTTP response with the used schemes, separated by commas. The web server is by no means obligated to use any compression method – this depends on the internal settings of the web server and also may depend on the internal architecture of the website in question. == Content-Encoding tokens == The official list of tokens available to servers and client is maintained by IANA, and it includes: br – Brotli, a compression algorithm specifically designed for HTTP content encoding, defined in RFC 7932 and implemented in all modern major browsers. compress – UNIX "compress" program method (historic; deprecated in most applications and replaced by gzip or deflate) deflate – compression based on the deflate algorithm (described in RFC 1951), a combination of the LZ77 algorithm and Huffman coding, wrapped inside the zlib data format (RFC 1950); exi – W3C Efficient XML Interchange gzip – GNU zip format (described in RFC 1952). Uses the deflate algorithm for compression, but the data format and the checksum algorithm differ from the "deflate" content-encoding. This method is the most broadly supported as of March 2011. identity – No transformation is used. This is the default value for content coding. pack200-gzip – Network Transfer Format for Java Archives zstd – Zstandard compression, defined in RFC 8478 In addition to these, a number of unofficial or non-standardized tokens are used in the wild by either servers or clients: bzip2 – compression based on the free bzip2 format, supported by lighttpd lzip – compression based on the free lzip format, supported by wget and Links lzma – compression based on (raw) LZMA is available in Opera 20, and in elinks via a compile-time option peerdist – Microsoft Peer Content Caching and Retrieval rsync – delta encoding in HTTP, implemented by a pair of rproxy proxies. xpress – Microsoft compression protocol used by Windows 8 and later for Windows Store application updates. LZ77-based compression optionally using a Huffman encoding. xz – LZMA2-based content compression, supported by a non-official Firefox patch; and fully implemented in mget since 2013-12-31. == Servers that support HTTP compression == SAP NetWeaver Microsoft IIS: built-in or using third-party module Apache HTTP Server, via mod_deflate (despite its name, only supporting gzip), and mod_brotli Hiawatha HTTP server: serves pre-compressed files Cherokee HTTP server, On the fly gzip and deflate compressions Oracle iPlanet Web Server Zeus Web Server lighttpd nginx – built-in Applications based on Tornado, if "compress_response" is set to True in the application settings (for versions prior to 4.0, set "gzip" to True) Jetty Server – built-into default static content serving and available via servlet filter configurations GeoServer Apache Tomcat IBM Websphere AOLserver Ruby Rack, via the Rack::Deflater middleware HAProxy Varnish – built-in. Works also with ESI Armeria – Serving pre-compressed files NaviServer – built-in, dynamic and static compression Caddy – built-in via encode Many content delivery networks also implement HTTP compression to improve speedy delivery of resources to end users. The compression in HTTP can also be achieved by using the functionality of server-side scripting languages like PHP, or programming languages like Java. Various online tools exist to verify a working implementation of HTTP compression. These online tools usually request multiple variants of a URL, each with different request headers (with varying Accept-Encoding content). HTTP compression is considered to be implemented correctly when the server returns a document in a compressed format. By comparing the sizes of the returned documents, the effective compression ratio can be calculated (even between different compression algorithms). == Problems preventing the use of HTTP compression == A 2009 article by Google engineers Arvind Jain and Jason Glasgow states that more than 99 person-years are wasted daily due to increase in page load time when users do not receive compressed content. This occurs when anti-virus software interferes with connections to force them to be uncompressed, where proxies are used (with overcautious web browsers), where servers are misconfigured, and where browser bugs stop compression being used. Internet Explorer 6, which drops to HTTP 1.0 (without features like compression or pipelining) when behind a proxy – a common configuration in corporate environments – was the mainstream browser most prone to failing back to uncompressed HTTP. Another problem found while deploying HTTP compression on large scale is due to the deflate encoding definition: while HTTP 1.1 defines the deflate encoding as data compressed with deflate (RFC 1951) inside a zlib formatted stream (RFC 1950), Microsoft server and client products historically implemented it as a "raw" deflated stream, making its deployment unreliable. For this reason, some software, including the Apache HTTP Server, only implements gzip encoding. == Security implications == Compression allows a form of chosen plaintext attack to be performed: if an attacker can inject any chosen content into the page, they can know whether the page contains their given content by observing the size increase of the encrypted stream. If the increase is smaller than expected for random injections, it means that the compressor has found a repeat in the text, i.e. the injected content overlaps the secret information. This is the idea behind CRIME. In 2012, a general attack against the use of data compression, called CRIME, was announced. While the CRIME attack could work effectively against a large number of protocols, including but not limited to TLS, and application-layer protocols such as SPDY or HTTP, only exploits against TLS and SPDY were demonstrated and largely mitigated in browsers and servers. The CRIME exploit against HTTP compression has not been mitigated at all, even though the authors of CRIME have warned that this vulnerability might be even more widespread than SPDY and TLS compression combined. In 2013, a new instance of the CRIME attack against HTTP compression, dubbed BREACH, was published. A BREACH attack can extract login tokens, email addresses or other sensitive information from TLS encrypted web traffic in as little as 30 seconds (depending on the number of bytes to be extracted), provided the attacker tricks the victim into visiting a malicious web link. All versions of TLS and SSL are at risk from BREACH regardless of the encryption algorithm or cipher used. Unlike previous instances of CRIME, which can be successfully defended against by turning off TLS compression or SPDY header compression, BREACH exploits HTTP compression which cannot realistically be turned off, as virtually all web servers rely upon it to improve data transmission speeds for users. As of 2016, the TIME attack and the HEIST attack are now public knowledge.
Read more →
Contact cleaner

Contact cleaner, also known as switch-cleaner, is any of various chemicals, or mixtures of chemicals, intended to remove or prevent the build-up of oxides or other unwanted substances on the conductive surfaces of connectors, switches, and other electronic components with moving surface-contacts, and thus reduce the contact resistance encountered. The use of contact cleaner can help to minimize the wetting current across a pair of contacts. An example of a simple contact cleaner is isopropyl alcohol Some contact cleaners are designed to evaporate completely and rapidly, leaving no residue. Others may contain lubricants. Lubricants themselves should not necessarily be used as contact cleaners, especially if they are designed to leave an unsuitable residue. However, appropriate lubricants may work well as contact cleaners.
Read more →
Group of Governmental Experts on Lethal Autonomous Weapons Systems

The Group of Governmental Experts on Lethal Autonomous Weapons Systems, commonly known as the GGE on LAWS, refers to a group of governmental experts established under the framework of the Convention on Certain Conventional Weapons (CCW), a United Nations arms control framework. The group examines legal, ethical, societal and moral questions that arise from the increased use of autonomous robots to carry weapons and to be programmed to engage in combat in various situations that might arise, including battles between countries, or in patrolling border areas or sensitive areas, or other similar roles. As of 18 March 2025, the Convention on Certain Conventional Weapons had 128 High Contracting Parties. In the Geneva Conventions, the term "High Contracting Parties" refers to the states that have joined the conventions and are therefore bound to uphold them. Among the countries that have joined are states with tense relations or ongoing armed conflict with one another, including Russia and Ukraine, Israel and the State of Palestine, and Pakistan and Afghanistan. == Background == In 2013, the Meeting of State Parties to the Convention on Certain Conventional Weapons agreed on a mandate on lethal autonomous weapon systems and tasked its chairperson with convening an informal Meeting of Experts to discuss issues related to emerging technologies in the area of LAWS. Those informal Meetings of Experts were then held in 2014, 2015 and 2016, and their reports fed into subsequent meetings of the High Contracting Parties. At the Fifth CCW Review Conference in 2016, the High Contracting Parties decided to establish an open-ended Group of Governmental Experts on emerging technologies in the area of LAWS, building on the earlier expert meetings. Since then, the group has been reconvened annually. In 2023, the Meeting of the High Contracting Parties to the CCW decided that the GGE on LAWS would continue its work in 2024 and 2025. The group was tasked with developing, by consensus, elements of a possible instrument, without predetermining its form, as well as other measures addressing lethal autonomous weapon systems, drawing on existing CCW protocols, earlier recommendations, state proposals, and legal, military, and technological expertise. == 2024 == In 2024, the GGE met twice, and the group was chaired by Robert in den Bosch, the Netherlands' disarmament ambassador. The 2024 Meeting of the High Contracting Parties decided that the group would meet for 10 days in 2025, in two five-day sessions, and reaffirmed its mandate to continue work by consensus on possible elements of an instrument and other measures addressing lethal autonomous weapon systems. == 2025 == At its first 2025 session, held in Geneva from 3 to 7 March 2025, the Group of Governmental Experts on Lethal Autonomous Weapon Systems discussed revisions to the chair's rolling text. The text was structured into five sections, or "boxes", though delegates held differing views on whether headings were useful or appropriate. Broadly, the discussions covered the characterization of lethal autonomous weapon systems, the application of international humanitarian law, possible prohibitions and regulations, legal review, and questions of accountability and responsibility. At its second session, held from 1 to 5 September 2025, delegations continued work on the chair's rolling text, which set out elements of a possible instrument and was organized into five thematic "boxes". == 2026 == === Developments before the 2026 session === A few weeks before the meeting, autonomous weapons drew renewed attention when the United States pressured Anthropic to revise the terms of use for its AI model Claude. Anthropic prohibited the model's use for mass domestic surveillance and for fully autonomous weapons operating without human oversight, while reports also emerged that OpenAI had reached an agreement with the U.S. Department of War for the use of its AI models, reportedly stipulating that they would not independently direct autonomous weapons where human control was required. The U.S. military nevertheless continued to use Claude during its war on Iran, and there was increasing alarm about the use of AI-assisted semi-autonomous weapons in conflicts including those in Ukraine, Sudan, Gaza, and Iran. Before the start of the sessions, Robert in den Bosch, as chair, warned that progress was urgent because technological developments were moving quickly. At the same time, although states agreed that international humanitarian law applied to LAWS, specific internationally binding standards governing such systems remained largely absent. A key divide before the session was that Russia and the United States opposed new legally binding instruments, while other states argued that new rules were necessary. According to Robert in den Bosch, the talks could lead to new rules, amendments to an existing convention, or a new treaty. === First session === From 2 to 6 March 2026, the group held its penultimate session under the group's three-year mandate. Delegations discussed the chair's rolling draft text, circulated in December 2025, on elements of a possible instrument or other measures concerning lethal autonomous weapon systems. In revised text circulated by the chair on 5 March 2026, a lethal autonomous weapon system was characterized as "a functionally integrated combination of one or more weapons and technological components, that can identify, select, and engage a target, without intervention by a human operator in the execution of these tasks". The text was divided into five boxes to structure discussion. During the session, delegates conducted a first reading of the draft text, and the chair later circulated revised language for several sections. Informal consultations were also held. According to campaign groups and participating observers, support grew during the week for moving to negotiations on the basis of the rolling text, with more than 70 states said to support that step by the end of the session, though some participants warned that attempts to bridge differences risked blurring the group's core purpose. The International Committee of the Red Cross argued that the text should not only restate existing international humanitarian law, but also clarify how those rules apply to autonomous weapons and set out additional measures tailored to the specific challenges such systems raise. Stop Killer Robots likewise emphasized the need to preserve meaningful human judgment and control over increasingly autonomous systems. During the discussions, the U.S. delegation opposed the term "human control" and reportedly proposed the alternative phrase "good faith human judgment and care". Other delegations rejected that wording as too weak, while many states continued to insist that meaningful human control over weapon systems remained essential.
Read more →
Link-richness

Link-richness is the quality, possessed by some websites, of having many hyperlinks. Classified advertising sites like Craigslist tend to be very link-rich, sometimes with hundreds of links on their main page. They help users find the links they are looking for by grouping links into clusters. Inadequate link richness has been described as frustrating to readers, as it reduces transparency of site content from the main page. Students new to wiki collaboration were found to need guidance in how to take full advantage of the medium's potential for creating link-rich content. Link-richness in some contexts can be distracting, as when an article is surrounded by extraneous links. Indeed, it is becoming accepted as a best practice for universities to have link-rich home pages that do not rely on user categorisation and exploration of long sequences of links and are not constrained by traditional boundaries between departments. Tools are sometimes needed to make the publishing of link-rich web sites tractable, and many people may lack the technical skills, time, or inclination to engage in hand- crafting new digital document forms. A link-rich site that is low on content is sometimes referred to as a "gateway site." Link-rich portals were popular on the Web in 2000. Yahoo! and other sites featuring categories with many links were heavily used and often required fewer than three clicks to reach the content. Web designers were creating flat sites with content positioned close to the top of pages.
Read more →
MIDI Show Control

MIDI Show Control (MSC), is a real-time System Exclusive extension of the international Musical Instrument Digital Interface (MIDI) standard. MSC enables all types of entertainment equipment to communicate with each other through the process of show control. The MIDI Show Control protocol is a technical standard ratified by the MIDI Manufacturers Association in 1991, which allows entertainment control devices to talk with each other and with computers to perform show control functions in live and prerecorded entertainment applications. Just like musical MIDI, MSC does not transmit the actual show media - it simply transmits digital information about a multimedia performance. == How MSC works == When any cue is called by a user (typically a stage manager) and/or preprogrammed timeline in a show control software application, the show controller transmits one or more MSC messages from its 'MIDI Out' port. A typical MSC message sequence is: the user has just called a cue the cue is for lighting device 3 the cue is number 45.8 the cue is in cue list 7 MSC messages are serially transmitted in the same way as musical messages and are fully compatible with all conventional MIDI hardware; however, many modern MSC devices now use Ethernet communications for higher bandwidth and the flexibility afforded by networks. Other performance parameters are also transmitted, such as lighting desk submaster settings using MSC SET messages. All cues that a media control device is capable of playing are assigned MSC messages within the Show Controller's cue list and they are transmitted from its MIDI Out port at the appropriate show time, depending on the actions of the user and the show controller's internally timed sequences. All MSC-compatible instruments follow the MSC specification and thus transmit identical MSC messages for identical MSC events, such as the playing of a certain cue on the media controller. Since they follow a published standard, all MSC devices can communicate with and understand each other, as well as with computers that have been programmed to understand MSC messages using the MSC Command Set. All MSC compatible instruments have a built-in MIDI interface and many now follow one of the various MIDI-over-Ethernet protocols. == History == To create the MSC spec, Charlie Richmond headed the USITT MIDI Forum on their Callboard Network in 1990, which included developers and designers from the theatre sound and lighting industry from around the world. It is believed that this was the first international standard to be developed without a single physical meeting of the participants. This Forum created the MSC standard between January and September 1990. This was ratified by the MIDI Manufacturers Association (MMA) in January 1991, and the Japan MIDI Standards Committee (JMSC) later that year, becoming a part of the standard MIDI specification in August 1991. The first show to fully use the MSC specification was the Magic Kingdom Parade at Walt Disney World's Magic Kingdom in September 1991. == MIDI Show Control software ==
Read more →
FaceApp

FaceApp is a photo and video editing application for iOS and Android developed by FaceApp Technology Limited, a company based in Cyprus. The app generates highly realistic transformations of human faces in photographs by using neural networks. The app can transform a face to make it smile, look younger, look older, or change gender. == History == FaceApp was launched on iOS in January 2017 and on Android in February 2017. It was developed by Yaroslav Goncharov, a former executive at Yandex, and created by the Russian company Wireless Lab. == Features == There are multiple options to manipulate the photo uploaded such as editor options of adding an impression, make-up, smiles, hair colors, hairstyles, glasses, age or beards. Filters, lens blur and backgrounds along with overlays, tattoos, and vignettes are also a part of the app. The gender change transformations of FaceApp have attracted particular interest from the LGBT and transgender communities, due to their ability to realistically simulate the appearance of a person as the opposite gender. == Criticism == In 2017, FaceApp faced criticism for a "hot" filter that appeared to lighten users' skin tones, prompting accusations of racial bias. The feature was briefly renamed "spark" before being removed. Founder Yaroslav Goncharov attributed the issue to training data bias and apologized. In August of that year, more criticism arose when it featured "ethnicity filters" depicting "White", "Black", "Asian", and "Indian". The filters were immediately removed from the app. In 2019, FaceApp faced criticism over its handling of user data, including concerns that it stored users' photos on its servers and could use them for commercial purposes. Founder Yaroslav Goncharov stated that images were processed on cloud servers like Google Cloud Platform and Amazon Web Services, not transferred to Russia, and were temporarily stored only to support editing functions before being deleted. U.S. Senator Chuck Schumer raised concerns about data privacy and called for an FBI investigation.
Read more →
Sycophancy (artificial intelligence)

In the field of artificial intelligence, sycophancy is a tendency of large language models (LLMs) and other AI assistants to tailor their responses to what they predict the user wants to hear rather than to what is accurate or warranted. The behavior takes several forms: an assistant may agree with a user's stated opinion even when the user is mistaken; it may abandon a correct answer after a challenge such as "are you sure?"; it may validate beliefs, decisions or self-presentation regardless of merit; or it may praise the user, their work or their ideas in unwarranted terms. The word is borrowed from the ordinary English term for fawning flattery, and is used in AI alignment and AI safety research to describe a class of misalignment failures associated with training on human feedback. Researchers at Anthropic first documented the behavior systematically in 2022. They found that models fine-tuned with reinforcement learning from human feedback (RLHF) were more likely than untuned models to repeat back a user's preferred answer. A 2023 follow-up paper, "Towards Understanding Sycophancy in Language Models", showed that five frontier assistants from OpenAI, Anthropic and Meta all exhibited the behavior, and traced its origin to biases in the human preference data used during training. Later work documented sycophancy in mathematics, medicine, academic peer review and other domains, and identified a broader category called "social sycophancy" affecting an assistant's emotional and interpersonal responses. The issue drew widespread public attention in April 2025 after OpenAI rolled back an update to its GPT-4o model. Users had reported that the assistant praised dangerous decisions, endorsed delusional thinking and offered exaggerated compliments for trivial prompts. OpenAI's post-mortem attributed the change in behavior to an additional training signal based on user thumbs-up and thumbs-down feedback. That episode, together with reporting in The New York Times, Rolling Stone and elsewhere on users drawn into delusional thinking through prolonged chatbot interaction, has been cited in litigation and in academic studies as evidence that sycophancy poses risks to user well-being. Proposed mitigations include fine-tuning on synthetic data that rewards disagreement with incorrect user statements, editing the small subset of model parameters causally responsible for the behavior, changes to the dialogue or system prompt, and benchmarks designed to surface sycophantic behavior before models are released. == Causes == The dominant explanation points to RLHF, the standard technique for aligning chat assistants with user expectations. Human annotators rank candidate model responses; a reward model is trained to predict those rankings; and the language model is then optimized against the reward model. Because human raters tend to prefer outputs that confirm their existing beliefs or flatter their work, the pipeline systematically rewards responses that agree with the annotator. Perez and colleagues at Anthropic published the first large-scale empirical evidence of the effect in 2022. They reported that RLHF training increased the probability that a model would repeat back a dialog user's preferred answer, and that larger models exhibited the behavior more strongly. Sharma and colleagues, the following year, went further and examined Anthropic's own preference data directly. Both the human raters and the reward models trained on their judgments preferred convincingly written sycophantic responses to truthful ones at a non-negligible rate. Wei and co-authors at Google DeepMind found similar results in the PaLM family, observing that both model scale and instruction tuning increased sycophancy on opinion questions. The behavior is often classified as a form of reward hacking, in which an optimization process exploits a flaw in its reward signal rather than achieving the intended objective. OpenAI's post-mortem of the April 2025 GPT-4o incident identified a more specific mechanism. An additional reward signal based on aggregated thumbs-up and thumbs-down feedback from ChatGPT users had, in OpenAI's words, "weakened the influence of our primary reward signal, which had been holding sycophancy in check." Separately, an Anthropic interpretability paper from 2025 located a linear direction in a model's internal activations corresponding to sycophantic behavior, and showed that such "persona vectors" could be used to flag sycophancy-inducing training data and to steer models away from the trait at inference time. == Measurement == The Anthropic team released SycophancyEval with its 2023 paper, supplying test sets for each of the four canonical behaviors. Two further benchmarks from Stanford followed in 2025. SycEval, applied to mathematical and medical reasoning tasks, reported an overall sycophancy rate of 58 per cent across the GPT-4o, Claude and Gemini models tested. ELEPHANT, aimed at social sycophancy, found that the eleven LLMs evaluated affirmed posts that the Reddit community r/AmITheAsshole had judged inappropriate in 42 per cent of cases, and preserved a user's face 45 percentage points more often than human respondents did. Domain-specific benchmarks have followed. BrokenMath tests robustness to plausible-looking but false mathematical claims drawn from competition problems, and reports that the best evaluated model was sycophantic in 29 per cent of cases. SYCON-Bench measures how many dialogue turns are required before a model abandons a correct position. Visual sycophancy in multimodal models has been examined with MM-SY and PENDULUM. A 2026 study by researchers at the Massachusetts Institute of Technology reported that personalization features, which adapt assistants to individual users over repeated sessions, can intensify social sycophancy. == Notable incidents == === GPT-4o rollback (April 2025) === On 25 April 2025, OpenAI completed the rollout of an update to GPT-4o, the default model used in ChatGPT at the time. Within days, users reported that the assistant had begun praising trivial messages in extravagant terms, endorsing impulsive or dangerous decisions, and reinforcing strong emotional statements without pushback. Widely shared examples included the model congratulating a user who reported stopping prescribed psychiatric medication, and praising a business plan to sell "shit on a stick" as venture-capital ready. OpenAI's chief executive, Sam Altman, wrote on 27 April that recent updates had made the model "too sycophant-y and annoying" and said fixes were in progress. The company began reverting the update on 28 April and completed the rollback for free users by 30 April. Two post-mortems followed: a short note on 29 April and a longer technical follow-up, "Expanding on what we missed with sycophancy", on 2 May. Both attributed the regression to a new training signal based on user thumbs-up and thumbs-down feedback, to inadequate pre-launch evaluation for sycophantic drift, and to the dismissal of qualitative concerns raised by internal testers before release. Reporting in CNN, Fortune and Bloomberg News treated the incident as a turning point in public awareness of the problem. === Chatbot-related psychological harm === From mid-2025 onward, news reports began to link sycophantic chatbot behavior to acute psychological harm. In June 2025, The New York Times technology reporter Kashmir Hill published an investigation centered on Eugene Torres, a Manhattan accountant with no history of mental illness, who developed a sustained delusional episode after a series of conversations with ChatGPT about simulation theory. According to the article, the assistant encouraged Torres to stop taking prescribed medication, to cut off friends and family, and at one point told him that he could fly from a nineteen-story building if he "truly believed". Futurism and Rolling Stone ran parallel investigations documenting other cases in which heavy use of ChatGPT had been associated with delusional thinking, involuntary commitment or, in at least one case, the death of a user with a pre-existing psychiatric diagnosis. A 2026 paper by researchers at the Massachusetts Institute of Technology and the University of Washington put forward a formal Bayesian model. It showed that even an ideally rational user could be drawn into what the authors call "delusional spiraling" when interacting with a sufficiently sycophantic assistant, and that the effect was not eliminated by suppressing hallucinations or by warning users in advance. The lawsuit Raine v. OpenAI, filed in San Francisco Superior Court in August 2025 by the parents of a sixteen-year-old who had died by suicide, alleges that "heightened sycophancy" was a design feature of ChatGPT that contributed to their son's death; it is the first wrongful-death suit against a large language-model provider. === Wider commentary === Mainstream coverage in outlets including The New York Times, The Washington Pos
Read more →
Magnetoquasistatic field

A magnetoquasistatic field is a class of electromagnetic field in which a slowly oscillating magnetic field is dominant. A magnetoquasistatic field is typically generated by low-frequency induction from a magnetic dipole or a current loop. The magnetic near-field of such an emitter behaves differently from the more commonly used far-field electromagnetic radiation. At low frequencies the rate of change of the instantaneous field strength with each cycle is relatively slow, giving rise to the name "magneto-quasistatic". The near field or quasistatic region typically extends no more than a wavelength from the antenna, and within this region the electric and magnetic fields are approximately decoupled. Weakly conducting non-magnetic bodies, including the human body and many mineral rocks, are effectively transparent to magnetoquasistatic fields, allowing for the transmission and reception of signals through such obstacles. Also, long-wavelength (i.e. low-frequency) signals are better able to propagate round corners than shorter-wave signals. Communication therefore need not be line-of-sight. The communication range of such signals depends on both the wavelength and the electromagnetic properties of the intervening medium at the chosen frequency, and is typically limited to a few tens of meters. == Physical principles == The laws of primary interest are Ampère's circuital law (with the displacement current density neglected) and the magnetic flux continuity law. These laws have associated with them continuity conditions at interfaces. In the absence of magnetizable materials, these laws determine the magnetic field intensity H given its source, the current density J. H is not everywhere irrotational. However, it is solenoidal everywhere. == Equipment design == A typical antenna comprises a 50-turn coil around a polyoxymethylene tube with diameter 16.5 cm, driven by a class E oscillator circuit. Such a device is readily portable when powered by batteries. Similarly, a typical receiver consist of an active receiving loop with diameter of one meter, an ultra-low-noise amplifier, and a band-pass filter. In operation the oscillator drives current through the transmitting loop to create an oscillating magnetic field. This field induces a voltage in the receiving loop, which is then amplified. Because the quasistatic region is defined within one wavelength of the electromagnetic source, emitters are limited to a frequency range between about 1 kHz and 1 MHz. Reducing the oscillating frequency increases the wavelength and hence the range of the quasistatic region, but reduces the induced voltage in the receiving loops which worsens the signal-to-noise ratio. In experiments carried out by the Carnegie Institute of Technology, the maximum range reported by was 50 meters. == Applications == === Resonant inductive coupling === In resonant coupling, the source and receiver are tuned to resonate at the same frequency and are given similar impedances. This allows power as well as information to flow from the source to the receiver. Such coupling via the magnetoquasistatic field is called resonant inductive coupling and can be used for wireless energy transfer. Applications include induction cooking, induction charging of batteries and some kinds of RFID tag. === Communications === Conventional electromagnetic communication signals cannot pass through the ground. Most mineral rock is neither electrically conducting nor magnetic, allowing magnetic fields to penetrate. Magnetoquasistatic systems have been successfully used for underground wireless communication, both surface-to-underground and between underground parties. At extremely low frequencies, below about 1 kHz, the wavelength is long enough for long-distance communication, although at a slow data rate. Such systems have been installed in submarines, with the local antenna comprising a wire up to several kilometers in length and trailed behind the vessel when at or near the surface. === Position and orientation tracking === Wireless position tracking is being increasingly used in applications such as navigation, security, and asset tracking. Conventional position tracking devices use high frequencies or microwaves, including global positioning systems (GPS), ultra-wide band (UWB) systems, and radio frequency identification systems (RFID), but these systems can easily be blocked by obstacles in their path. Magnetoquasistatic positioning takes advantage of the fact that the fields are largely undisturbed when in the presence of human beings and physical structures, and can be used for both position and orientation tracking for ranges up to 50 meters. To accurately determine the orientation and position of a dipole/emitter, allowance must be made not only for the field pattern generated by the emitter, but also for the eddy-currents they induce in the earth, which create secondary fields detectable by the receivers. By using complex image theory to correct this field generation from earth, and by using frequencies on the order of a few hundred kilohertz to obtain the required signal-to-noise ratio (SNR), it is possible to analyze the position of the dipole through azimuthal orientation, θ {\displaystyle \theta } , and inclination orientation, ϕ {\displaystyle \phi } . A Disney research team has used this technology to effectively determine the position and orientation of an American football, something not traceable through conventional wave propagation techniques due to human body obstruction. They inserted an oscillator-driven coil, around the diameter of the center of the ball, to generate the magnetoquasistatic field. The signal was able to pass undisturbed through multiple players.
Read more →
Vacuum tube characteristics

Vacuum tube characteristics (also called tube curves, valve characteristics or valve curves) describes the electrical relationships between electrode voltages and currents in a vacuum tube. These relationships are commonly presented as characteristic curves in tube manuals and engineering references. The curves typically show plate current versus plate voltage for several fixed control-grid voltages, showing how current varies with electrode potentials under controlled conditions. Designers use them to select operating points, determine voltage gain, estimate output power, and construct graphical load-line analyses. The use of characteristic curves as an engineering tool for analyzing vacuum-tube operation was established in the 1910s, notably in work by Edwin Howard Armstrong. Examples of such curves appear in early tube manuals and textbooks and form the basis of classical vacuum-tube circuit design. Different types of vacuum tubes are characterized using plots appropriate to their electrode structure and intended use. Two-electrode devices such as diodes are described primarily by the relation between plate voltage and plate current. Amplifying tubes containing control grids, such as triodes, tetrodes, pentodes, and beam tetrodes, are represented by families of curves measured for different grid voltages. From these families additional parameters such as amplification factor (μ), transconductance (gm), and plate resistance (rp) may be obtained. Although these plots are used primarily for circuit design, their shapes arise from the underlying physics of electron flow in vacuum tubes. The physical principles responsible for the observed characteristics are discussed in later sections. == 3/2 power law == In high-vacuum thermionic diodes operating under normal conditions, plate current increases nonlinearly with plate voltage. Over the space-charge-limited region, the current is well approximated by the three-halves power relation I p = P ⋅ V p 3 / 2 {\displaystyle I_{p}=P\cdot V_{p}^{3/2}} where P {\displaystyle P} is the perveance of the tube. Perveance is determined primarily by electrode geometry, including cathode area and cathode-to-plate spacing. It provides a practical measure of current-producing capability and is often used in tube manuals in place of a complete family of plate-characteristic curves. == Signal diode characterization == For small-signal diodes, tube manuals typically publish a single static anode characteristic showing anode current (Ia) as a function of anode voltage (Va), measured with the heater operating at its rated voltage. Because the diode contains no control grid, only one such I–V curve is required. The low-voltage portion of the curve is particularly important in detector service, where the nonlinear curvature of the current–voltage relation allows a small alternating signal to produce a net direct-current output, resulting in rectification. In addition to the static characteristic, tube manuals specify heater ratings, maximum plate voltage, permissible average current, and interelectrode capacitance. These parameters define the allowable operating region and high-frequency behavior. Another typical data sheet for a diode is for the Philips EB91 double diode. This book includes curves of the diode response in use as a detector. The output voltage is non-zero for an input voltage of 0 due to the Edison effect. == Rectifier characterization == Vacuum-tube rectifiers intended for power-supply service are specified differently from signal diodes. Their data emphasize heater requirements, peak inverse voltage, maximum peak plate current, permissible DC output current for various filter configurations, and regulation characteristics. Rectifier tubes exhibit nonlinear voltage drop that increases with current. For limited operating ranges this behavior may be represented by an equivalent or effective series resistance corresponding to the local slope of the plate characteristic (dynamic plate resistance, dV/dI). Diode voltages can be determied by use of a graphical aide. In capacitor-input supplies, conduction occurs in pulses near the peaks of the AC waveform, producing peak currents substantially greater than the average DC load current. Data sheets therefore specify maximum peak plate current and permissible filter capacitance in addition to average DC ratings. Under varying load conditions, the supply voltage changes in accordance with the rectifier's nonlinear characteristic and effective impedance. == Triode characterization == === Early use === The systematic use of characteristic curves to explain and quantify vacuum-tube amplification was introduced by Edwin Howard Armstrong in 1914. Using measured plate voltage-current curves, Armstrong demonstrated the mechanism of triode amplification and clarified the operation of grid-leak detection. ==== Plate and transfer characteristics ==== Triode data sheets present families of plate characteristics showing plate current I p {\displaystyle I_{p}} as a function of plate voltage E p {\displaystyle E_{p}} for several fixed grid voltages E g {\displaystyle E_{g}} . From these curves the operating point, voltage gain, and load-line behavior may be determined graphically. In normal operation, plate current depends on both grid and plate voltage. Classical analysis shows that the characteristics for different grid voltages are similar in form and differ primarily by horizontal displacement. In triodes, plate current may be approximated by I p = k ( E g + E p μ ) 3 / 2 {\displaystyle I_{p}=k\left(E_{g}+{\frac {E_{p}}{\mu }}\right)^{3/2}} where E g {\displaystyle E_{g}} is the grid voltage, E p {\displaystyle E_{p}} the plate voltage, μ {\displaystyle \mu } the amplification factor, and k {\displaystyle k} a constant determined by the tube geometry.. The amplification factor μ represents the relative effectiveness of grid voltage compared with plate voltage in controlling current. It is fundamentally determined by structural dimensions, particularly grid-to-cathode spacing relative to plate-to-cathode spacing. ==== Small-signal parameters ==== Triodes are commonly characterized by three interrelated small-signal parameters: Amplification factor ( μ {\displaystyle \mu } ) — the change in plate voltage divided by the change in grid voltage at constant plate current: μ = ( ∂ E p ∂ E g ) I p {\displaystyle \mu =\left({\frac {\partial E_{p}}{\partial E_{g}}}\right)_{I_{p}}} Transconductance ( g m {\displaystyle g_{m}} ) — the change in plate current divided by the change in grid voltage at constant plate voltage: g m = ( ∂ I p ∂ E g ) E p {\displaystyle g_{m}=\left({\frac {\partial I_{p}}{\partial E_{g}}}\right)_{E_{p}}} Plate resistance ( r p {\displaystyle r_{p}} ) — the change in plate voltage divided by the change in plate current at constant grid voltage: r p = ( ∂ E p ∂ I p ) E g {\displaystyle r_{p}=\left({\frac {\partial E_{p}}{\partial I_{p}}}\right)_{E_{g}}} These parameters are related by μ = g m r p {\displaystyle \mu =g_{m}r_{p}} as shown in classical tube theory treatments. These parameters are obtained either from slopes of the characteristic curves or from tabulated operating-point data. ==== Comparison of ECC81, ECC82, and ECC83 ==== The ECC81, ECC82, and ECC83 (also known respectively as 12AT7, 12AU7, and 12AX7) are closely related dual triodes widely used in small-signal amplifier stages. Although similar in construction and envelope size, they differ significantly in electrical parameters due to differences in electrode spacing and grid structure. (Data representative of manufacturer specifications.) The ECC83 exhibits high μ {\displaystyle \mu } and high plate resistance, producing large voltage gain but relatively low current drive capability. The ECC82 has lower μ {\displaystyle \mu } and lower plate resistance, allowing greater current delivery and reduced voltage gain. The ECC81 occupies an intermediate position with comparatively high transconductance and moderate amplification factor. These differences arise primarily from variations in grid pitch, cathode area, and electrode spacing, which determine perveance and amplification factor. Although the external envelope is similar, the internal geometry governs the characteristic curves and small-signal parameters. == Tetrode (screen-grid) characterization == The screen-grid tube (tetrode) was developed primarily to reduce the electrostatic coupling between plate and control grid that limited gain and stability in radio-frequency triode amplifiers. In triodes, the grid–plate capacitance provides feedback from plate to grid, restricting obtainable gain and often requiring neutralization circuits such as those used in neutrodyne receivers. By inserting a positively biased screen grid between control grid and plate, this capacitive coupling is greatly reduced, permitting higher stable gain at radio frequencies. The screen grid, also known as the shield grid or grid 2 (to distinguish it from t
Read more →
CodePen

CodePen is an online community for testing and showcasing user-created HTML, CSS and JavaScript code snippets. It functions as an online code editor and open-source learning environment, where developers can create code snippets, called "pens," and test them. It was founded in 2012 by full-stack developers Alex Vazquez and Tim Sabat and front-end designer Chris Coyier. Its employees work remotely, rarely all meeting together in person. CodePen is a large community for web designers and developers to showcase their coding skills, with an estimated 330,000 registered users and 14.16 million monthly visitors.
Read more →
Message queuing service

A message queueing service is a message-oriented middleware or MOM deployed in a compute cloud using software as a service model. Service subscribers access queues and or topics to exchange data using point-to-point or publish and subscribe patterns. It's important to differentiate between event-driven and message-driven (aka queue driven) services: Event-driven services (e.g. AWS SNS) are decoupled from their consumers. Whereas queue / message driven services (e.g. AWS SQS) are coupled with their consumers. Message queues can be a good buffer to handle spiky workloads but they have a finite capacity. According to Gregor Hohpe, message queues require proper mechanisms (aka flow controls) to avoid filling the queue beyond its manageable capacity and to keep the system stable. == Ordering Guarantees in Message Queues == Amazon SQS FIFO and Azure Service Bus sessions are queue-based messaging systems that provide ordering guarantees within a message group or session attempt but do not necessarily guarantee ordered delivery in cases of retries or failures. In SQS FIFO, messages in the same message group are processed in order, with subsequent messages held until the preceding message is successfully processed or moved to the dead-letter queue (DLQ). Once a message is placed in the DLQ, it is no longer retried, creating a gap in the sequence. However, the remaining messages continue to be delivered in order. Azure Service Bus sessions function similarly by maintaining ordering within a session, provided a single consumer processes messages sequentially. The implementation differs from SQS FIFO but follows the same fundamental ordering principle. In contrast, Apache Kafka is a distributed log-based messaging system that guarantees ordering within individual partitions rather than across the entire topic. Unlike queue-based systems, Kafka retains messages in a durable, append-only log, allowing multiple consumers to read at different offsets. Kafka uses manual offset management, giving consumers control over retries and failure handling. If a consumer fails to process a message, it can delay committing the offset, preventing further progress in that partition while other partitions remain unaffected. This partition-based design enables fault isolation and parallel processing while allowing ordering to be maintained within partitions, depending on consumer handling. == Vendors == Apache Kafka Apache Kafka is a distributed system consisting of servers that store and forward messages between producer client and consumer applications. IBM MQ IBM MQ offers a managed service that can be used on IBM Cloud and Amazon Web Services. Microsoft Azure Service Bus Service Bus offers queues, topics & subscriptions, and rules/actions in order to support publish-subscribe, temporal decoupling, and load balancing scenarios. Azure Service Bus is built on AMQP allowing any existing AMQP 1.0 client stack to interact with Service Bus directly or via existing .Net, Java, Node, and Python clients. Standard and Premium tiers allow for pay as you go or isolated resources at massive scale. Oracle Messaging Cloud Service This service provides a messaging solution for applications for asynchronous communication and is influenced by the Java Message Service (JMS) API specification. Any application platform that understands HTTP can also use Oracle Messaging Cloud Service through the REST interface. For Java applications, Oracle Messaging Cloud Service provides a Java library that implements and extends the JMS 1.1 interface. The Java library implements the JMS API by acting as a client of the REST API. Amazon Simple Queue Service Supports messages natively up to 256K, or up to 2GB by transmitting payload via S3. Highly scalable, durable and resilient. Provides loose-FIFO and 'at least once' delivery in order to provide massive scale. Supports REST API and optional Java Message Service client. Low latency. Utilizes Amazon Web Services. IronMQ Supports messages up to 64k; guarantees order; guarantees once only delivery; no delays retrieving messages. Supports REST API and beanstalkd open source protocol. Runs on multiple clouds including AWS and Rackspace. Scaling must be managed by user. RabbitMQ RabbitMQ is a reliable and mature messaging and streaming broker, which is easy to deploy on cloud environments, on-premises, and on your local machine. Supports AMQP, STOMP, MQTT StormMQ Open platform supports messages up to 50Mb. Uses AMQP to avoid vendor lock-in and provide language neutrality. Locate-It Option allows customers to audit the location of their data at all times and satisfy data protection principles. AnypointMQ An enterprise multi-tenant, cloud messaging service that performs advanced asynchronous messaging scenarios between applications. Anypoint MQ is fully integrated with Anypoint Platform, offering role based access control, client application management, and connectors.
Read more →
Digital goods

Digital goods or e-goods are intangible goods that exist in digital form. Examples are Wikipedia articles; digital media, such as e-books, downloadable music, internet radio, internet television and streaming media; fonts, logos, photos and graphics; digital subscriptions; online ads (as purchased by the advertiser); internet coupons; electronic tickets; electronically treated documentation in many different fields; downloadable software (Digital Distribution) and mobile apps; cloud-based applications and online games; virtual goods used within the virtual economies of online games and communities; community access; workbooks; worksheets; planners; e-learning (online courses); webinars, video tutorials, blog posts; cards; patterns; website themes and templates. == Legal concerns about digital goods == Special legal concerns regarding digital goods include copyright infringement and taxation. Also the question of the ownership (versus licensed use or service only) of purely digital goods is not finally resolved. For instance, the software installers of the digital software distributor gog.com are technically independent to the account but are still subject to the EULA, where a "licensed, not sold" formulation is used. Therefore, it is not clear if the software can be legally used after a hypothetical loss of the account; a question which was also raised before in practice for the similar service Steam. In July 2012, the European Court of Justice ruled in the case UsedSoft GMbH v. Oracle International Corp. that the sale of a software product, either through a physical support or download, constituted a transfer of ownership in EU law, thus the first sale doctrine applies; the ruling thereby breaks the "licensed, not sold" legal theory, but leaves open numerous questions. Therefore, it is also permissible to resell software licenses even if the digital good has been downloaded directly from the Internet, as the first-sale doctrine applied whenever software was originally sold to a customer for an unlimited amount of time, thus prohibiting any software maker from preventing the resale of their software by any of their legitimate owners. The court requires that the previous owner must no longer be able to use the licensed software after the resale, but finds that the practical difficulties in enforcing this clause should not be an obstacle to authorizing resale, as they are also present for software which can be installed from physical supports, where the first-sale doctrine is in force. In several cases, content providers have faced criticism for revoking access to digital goods due to expired licenses or the discontinuation of a product, such as ebooks (which resulted in a lawsuit against Amazon.com, Inc.), digital video (with Sony Interactive Entertainment revoking access to purchased StudioCanal content from its now-defunct PlayStation video store; a similar move involving Warner Bros. Discovery content was averted by an updated license agreement), and video games (such as Ubisoft discontinuing and revoking access to its game The Crew without providing refunds or the ability to redownload the game) In September 2024, the U.S. state of California implemented a consumer protection law that prohibits the use of terms such as "buy" or "purchase" during transactions involving digital goods if there is no way to obtain the purchases in a manner that cannot be revoked by the seller (such as allowing it to be downloaded for permanent, offline access), and requires a disclaimer to be displayed to the customer at the time of purchase.
Read more →
Awwwards

Awwwards (Awwwards Online SL) is an organization that hosts web design competitions and conferences across Europe and the United States. Website owners and developers can participate by submitting their websites for review. Submissions are assessed by a jury, and top entries are presented and awarded prizes on a rotational basis. == Nomination process == Web designers submit their websites through Awwwards' platform for consideration for the Site of the Day. A jury, composed of industry professionals, and the Awwwards community evaluate the entries. The best daily sites are published annually in "The 365 Best Websites Around the World" book. == Jury == The jury consists of international designers, developers, and agencies who assess the creativity, technical skills, and insight of the submitted web projects. The panel's expertise ensures a comprehensive review process. === Developer Award === Awwwards, in partnership with Microsoft, created the Developer Award to recognize web developers who demonstrate excellence in creating websites that meet modern standards. The award highlights websites that work seamlessly across various platforms and devices, using best practices in HTML5, JavaScript, and CSS. == Annual winners == Some prominent Site of the Year winners include Mercedes-Benz, Bloomberg L.P., Bose Corporation, Warner Brothers, Volkswagen, Uber, and Google. == Awwwards conference == Awwwards also organizes two-day conferences featuring speakers from major tech companies and industry leaders such as Microsoft, Google, Spotify, Adobe, Opera, and Smashing Magazine. These events focus on the latest trends in web design and development. Speakers at Awwwards conferences have included notable figures in the design and technology industry such as Stefan Sagmeister, Paula Scher, and design leaders from companies including Wix. == Corporate affairs == === Platform === Awwwards operates an online platform where web designers and developers submit websites for evaluation and awards. Submitted projects are reviewed by a jury based on design, usability, creativity, and content. The platform also serves as a community hub for discovering digital trends, showcasing work, and accessing educational resources including talks and interviews. Design professionals from international companies have participated in Awwwards events and platform content. For example, Wix, a cloud-based web development company known for its website builder tools, has featured prominently in Awwwards conferences, with its design leadership contributing to discussions on design trends and creative thinking.
Read more →