AI Assistant Helpx

AI Assistant Helpx — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

  • Hybrid machine translation

    Hybrid machine translation

    Hybrid machine translation is a method of machine translation that is characterized by the use of multiple machine translation approaches within a single machine translation system. The motivation for developing hybrid machine translation systems stems from the failure of any single technique to achieve a satisfactory level of accuracy. Many hybrid machine translation systems have been successful in improving the accuracy of the translations, and there are several popular machine translation systems which employ hybrid methods. == Approaches == === Multi-engine === This approach to hybrid machine translation involves running multiple machine translation systems in parallel. The final output is generated by combining the output of all the sub-systems. Most commonly, these systems use statistical and rule-based translation subsystems, but other combinations have been explored. For example, researchers at Carnegie Mellon University have had some success combining example-based, transfer-based, knowledge-based and statistical translation sub-systems into one machine translation system. === Statistical rule generation === This approach involves using statistical data to generate lexical and syntactic rules. The input is then processed with these rules as if it were a rule-based translator. This approach attempts to avoid the difficult and time-consuming task of creating a set of comprehensive, fine-grained linguistic rules by extracting those rules from the training corpus. This approach still suffers from many problems of normal statistical machine translation, namely that the accuracy of the translation will depend heavily on the similarity of the input text to the text of the training corpus. As a result, this technique has had the most success in domain-specific applications, and has the same difficulties with domain adaptation as many statistical machine translation systems. === Multi-Pass === This approach involves serially processing the input multiple times. The most common technique used in multi-pass machine translation systems is to pre-process the input with a rule-based machine translation system. The output of the rule-based pre-processor is passed to a statistical machine translation system, which produces the final output. This technique is used to limit the amount of information a statistical system need consider, significantly reducing the processing power required. It also removes the need for the rule-based system to be a complete translation system for the language, significantly reducing the amount of human effort and labor necessary to build the system. === Confidence-Based === This approach differs from the other hybrid approaches in that in most cases only one translation technology is used. A confidence metric is produced for each translated sentence from which a decision can be made whether to try a secondary translation technology or to proceed with the initial translation output. SMT is also used when common error patterns such as multiple repeat words appear in sequence, as is common with NMT when the attention mechanism is confused.

    Read more →
  • Nature Manifesto

    Nature Manifesto

    Nature Manifesto is an Immersive sound piece and multimedia installation by Icelandic artist Björk and artist and curator Aleph Molinari, created in collaboration with the French Institute for Research and Coordination in Acoustics/Music (IRCAM). The installation was showcased at the Centre Pompidou in Paris, France from November 20, 2024 to December 9, 2024, as part of the museum's "Biodiversity: Which Culture for Which Future?" forum. It combines natural soundscapes, calls of extinct animals reconstructed through artificial intelligence, and Björk's narration to address damages to biodiversity and the collapse of ecosystems. == Background == Björk's work intricately weaves themes of nature and technology, reflecting her deep engagement with both realms. In 2008, she co-founded the Náttúra campaign to protest the construction of foreign-backed aluminum factories in Iceland, aiming to protect the country's natural landscapes. She released the single "Náttúra" featuring Thom Yorke, with all proceeds supporting this environmental initiative. Her 2011 album Biophilia further exemplifies this synthesis, exploring the relationships between music, nature, and technology through a multimedia project that included interactive apps, custom-made instruments, and educational workshops. Björk's Cornucopia tour (2019-2023) seamlessly integrates themes of nature preservation and environmental activism, and featured a recorded message by Swedish climate activist Greta Thunberg. The tour's fusion of music, technology, and natural imagery reflects Björk's vision of a harmonious coexistence between humanity and nature, advocating for sustainable futures. Björk has previously used artificial intelligence in her works. In 2020, she collaborated with Microsoft to create Kórsafn, a sound installation for the Sister City Hotel lobby in New York City which used an AI-powered model that elaborated choral recordings from her discography through a sensor on the rooftop of the building that would generate music according to data like the weather and the seasons. For her charity single "Oral", featuring Spanish singer Rosalía, she released a music video directed by photographer and visual artist Carlota Guerrero, who used AI-generated deepfake versions of the artists. == Concept == Nature Manifesto is a three-minute and forty-second immersive sound piece. The composition merges Björk's voice, as she articulates a manifesto on biodiversity and the climate crisis, with cries of extinct and endangered animals, harmonizing them with natural soundscapes. The installation was curated by Chloé Siganos and Aleph Molinari, with associate curator Delphine Le Gatt. The primary goal of Nature Manifesto is to foster a deeper understanding of humanity's impact on the natural world. Conceived as a "post-optimistic" manifesto, Aleph Molinari stated that the project's purpose was to "offer a voice to nature". He stated that "the modern concept of nature itself is problematic [...] because it’s a concept born in the Romantic period and, with the rise of the industrial era, became an antithesis to human civilisation and everything urban. Nature came to define what was outside, the savage Other... But nature is everything that we’re part of." The soundscape features recreated calls of extinct and endangered species, developed in collaboration with the French sound research institute IRCAM. Artificial intelligence was employed to simulate the vocalizations of animals that no longer exist in the wild. To save energy and lessen the ecological impact of the use of AI, the research institute developed a "frugal AI" model capable of generating audio in real-time on local servers without a graphics processing unit. The sounds were then produced and edited by Björk in collaboration with Robin Meier Wiratunga and Bergur Þórisson. The installation was located within the Centre Pompidou's escalator, known as the "caterpillar". The installation was further supported by videos created by visual artist Sam Balfus (also known as Balfua) by using artificial intelligence, and edited by Santiago Molinari. == Activism == To sustain and broaden the themes presented in Nature Manifesto, Björk publicly urged French President Emmanuel Macron to prohibit bottom trawling within France's marine protected areas (MPA). She criticized the French government's claim of protecting 30% of its marine territories, highlighting that over 90% of these MPAs exist only on paper, allowing destructive practices like bottom trawling to continue unchecked. She collaborated with non-governmental organizations Sustainable Ocean Alliance, Ungir umhverfissinnar and Bloom, to advocate for genuine ocean conservation. Björk promoted the cause through her social media profiles by sharing petitions. In November 2024, Björk lent her Instagram account to French environmental activists to directly address Macron. The activists used the platform to call for stronger protection of the ocean, urging Macron to impose stricter restrictions on harmful fishing practices, particularly bottom trawling. == Reception == Nature Manifesto received mixed to positive reviews from critics. Some critiques focused on the installation's setting, suggesting that the movement inherent to the escalator space diminished the immersive potential of the soundscape. The choice of using artificial intelligence was also questioned. Björk and Molinari defended this, as both see AI as a tool that can be used creatively and sustainably, with Björk focusing on the importance of human input to give AI a "soul", and Molinari stressing the need for sustainable technological practices in the broader context of digital life. After the exhibition ended, Björk further opinionated: "this is how we will work in the future. [...] if there is no soul in tomorrow's music made by AI it is because [no one] put it there and we have to speak out and guard this as listeners", further stating that there is already "soulless muzak" [sic] on Spotify, "mass manufactured without the attention of creativity".

    Read more →
  • AI-assisted targeting in the Gaza Strip

    AI-assisted targeting in the Gaza Strip

    As part of the Gaza war, the Israel Defense Forces (IDF) have used artificial intelligence to rapidly and automatically perform much of the process of determining what to bomb. Israel has greatly expanded the bombing of the Gaza Strip, which in previous wars had been limited by the Israeli Air Force running out of targets. These tools include the Gospel, an AI which automatically reviews surveillance data looking for buildings, equipment and people thought to belong to the enemy, and upon finding them, recommends bombing targets to a human analyst who may then decide whether to pass it along to the field. Another is Lavender, an "AI-powered database" which lists tens of thousands of Palestinian men linked by AI to Hamas or Palestinian Islamic Jihad, and which is also used for target recommendation. Critics have argued the use of these AI tools puts civilians at risk, blurs accountability, and results in militarily disproportionate violence in violation of international humanitarian law. == The Gospel == Israel uses an AI system dubbed "Habsora", "the Gospel", to determine which targets the Israeli Air Force would bomb. It automatically provides a targeting recommendation to a human analyst, who decides whether to pass it along to soldiers in the field. The recommendations can be anything from individual fighters, rocket launchers, Hamas command posts, to private homes of suspected Hamas or Islamic Jihad members. AI can process military intelligence far faster than humans. Retired Lt Gen. Aviv Kohavi, head of the IDF until 2023, stated that the system could produce 100 bombing targets in Gaza a day, with real-time recommendations which ones to attack, where human analysts might produce 50 a year. A lecturer interviewed by NPR estimated these figures as 50–100 targets in 300 days for 20 intelligence officers, and 200 targets within 10–12 days for the Gospel. === Technological background === The Gospel uses machine learning, where an AI is tasked with identifying commonalities in vast amounts of data (e.g. scans of cancerous tissue, photos of a facial expression, surveillance of Hamas members identified by human analysts), then looking for those commonalities in new material. What information the Gospel uses is not known, but it is thought to combine surveillance data from diverse sources in enormous amounts. Recommendations are based on pattern-matching. A person with enough similarities to other people labeled as enemy combatants may be labelled a combatant themselves. Regarding the suitability of AIs for the task, NPR cited Heidy Khlaaf, engineering director of AI Assurance at the technology security firm Trail of Bits, as saying "AI algorithms are notoriously flawed with high error rates observed across applications that require precision, accuracy, and safety." Bianca Baggiarini, lecturer at the Australian National University's Strategic and Defence Studies Centre wrote AIs are "more effective in predictable environments where concepts are objective, reasonably stable, and internally consistent." She contrasted this with telling the difference between a combatant and non-combatant, which even humans frequently can't do. Khlaaf went on to point out that such a system's decisions depend entirely on the data it's trained on, and are not based on reasoning, factual evidence or causation, but solely on statistical probability. === Operation === The IAF ran out of targets to strike in the 2014 war and 2021 crisis. In an interview on France 24, investigative journalist Yuval Abraham of +972 Magazine stated that to maintain military pressure, and due to political pressure to continue the war, the military would bomb the same places twice. Since then, the integration of AI tools has significantly sped up the selection of targets. In early November, the IDF stated more than 12,000 targets in Gaza had been identified by the target administration division that uses the Gospel. NPR wrote on December 14 that it was unclear how many targets from the Gospel had been acted upon, but that the Israeli military said it was currently striking as many as 250 targets a day. The bombing, too, has intensified to what the December 14 article called an astonishing pace: the Israeli military stated at the time it had struck more than 22,000 targets inside Gaza, at a daily rate more than double that of the 2021 conflict, more than 3,500 of them since the collapse of the truce on December 1. Early in the offensive the head of the Air Force stated his forces only struck military targets, but added: "We are not being surgical." Once a recommendation is accepted, another AI, Fire Factory, cuts assembling the attack down from hours to minutes by calculating munition loads, prioritizing and assigning targets to aircraft and drones, and proposing a schedule, according to a pre-war Bloomberg article that described such AI tools as tailored for a military confrontation and proxy war with Iran. One change that The Guardian noted is that since senior Hamas leaders disappear into tunnels at the start of an offensive, systems such as the Gospel have allowed the IDF to locate and attack a much larger pool of more junior Hamas operatives. It cited an official who worked on targeting decisions in previous Gaza operations as saying that while the homes of junior Hamas members had previously not been targeted for bombing, the official believes the houses of suspected Hamas operatives were now targeted regardless of rank. In the France 24 interview, Abraham, of +972 Magazine, characterized this as enabling the systematization of dropping a 2000 lb bomb into a home to kill one person and everybody around them, something that had previously been done to a very small group of senior Hamas leaders. NPR cited a report by +972 Magazine and its sister publication Local Call as asserting the system is being used to manufacture targets so that Israeli military forces can continue to bombard Gaza at an enormous rate, punishing the general Palestinian population. NPR noted it had not verified this; it was unclear how many targets are being generated by AI alone, but there had been a substantial increase in targeting, with an enormous civilian toll. In principle, the combination of a computer's speed to identify opportunities and a human's judgment to evaluate them can enable more precise attacks and fewer civilian casualties. Israeli military and media have emphasized this capacity to minimize harm to non-combatants. Richard Moyes, researcher and head of the NGO Article 36, pointed to "the widespread flattening of an urban area with heavy explosive weapons" to question these claims, while Lucy Suchman, professor emeritus at Lancaster University, described the bombing as "aimed at maximum devastation of the Gaza Strip". The Guardian wrote that when a strike was authorized on private homes of those identified as Hamas or Islamic Jihad operatives, target researchers knew in advance the expected number of civilians killed, each target had a file containing a collateral damage score stipulating how many civilians were likely to be killed in a strike, and according to a senior Israeli military source, operatives use a "very accurate" measurement of the rate of civilians evacuating a building shortly before a strike. "We use an algorithm to evaluate how many civilians are remaining. It gives us a green, yellow, red, like a traffic signal." ==== 2021 use ==== Kohavi compared the target division using the Gospel to a machine and stated that once the machine was activated in the war of May 2021, it generated 100 targets a day, with half of them being attacked, in contrast with 50 targets in Gaza per year beforehand. Approximately 200 targets came from the Gospel out of the 1,500 targets Israel struck in Gaza in the war, including both static and moving targets according to the military. The Jewish Institute for National Security of America's after action report identified an issue, stating the system had data on what was a target, but lacked data on what wasn't. The system depends entirely on training data, and intel that human analysts had examined and deemed didn't constitute a target had been discarded, risking bias. The vice president expressed his hopes this had since been rectified. === Organization === The Gospel is used by the military's target administration division (or Directorate of Targets or Targeting Directorate), which was formed in 2019 in the IDF's intelligence directorate to address the air force running out of targets to bomb, and which Kohavi described as "powered by AI capabilities" and including hundreds of officers of soldiers. In addition to its wartime role, The Guardian wrote it'd helped the IDF build a database of between 30,000 and 40,000 suspected militants in recent years, and that systems such as the Gospel had played a critical role in building lists of individuals authorized to be assassinated. The Gospel was developed by Unit 8200 of the Israeli Intelligence C

    Read more →
  • Cruel World of Dreams and Fears

    Cruel World of Dreams and Fears

    Cruel World of Dreams and Fears is the debut album from Ukrainian-born Czech black metal artist Draugveil, released independently on 13 June 2025. The album became notable among metal fans due to its cover, featuring Draugveil in a suit of armour and corpse paint, and lying in a field of red roses. The cover was the subject of parodying internet memes, as well as accusations of using artificial intelligence (AI) to make it. These claims were later expanded to suggest that AI was used to make the album's music. == Memes and AI accusations == Upon the album being released on YouTube on the channel Black Metal Promotion, the album attracted attention due to its cover, depicting Draugveil lying in a field of roses, dressed in armour, wearing corpse paint and having a sword stuck in the ground. Some compared it to covers where other artists are lying on the ground, such as Michael Jackson's Thriller, Luther Vandross's Give Me the Reason, and the UK cover of Lionel Richie's You Are. Critics of the album, however, suggested that AI was used to make the cover. This was partly due to suggestions that the rose stems in the picture come out from the ground in an unrealistic way. This later resulted in claims from some fans that AI was also used to produce the music, and later the lyrics and vocals. These claims began on a Facebook page entitled "AI Generated Nonsense", which was later deleted. No definitive evidence, however, was produced to back these claims. Derek McArthur, a journalist for Glasgow-based newspaper The Herald, wrote: "The music is in line with what one would expect from a one-man black metal project in the vein of Judas Iscariot and Burzum, but then if AI was asked to create music in a black metal style, that is probably what it would decide to generically produce and spit out." Draugveil's reaction to the claims was: "Let people decide." The result of the claims of AI has led to some writers to claim that artists in the future will have to prove they are human to be taken seriously, and that members of the public will be increasing doubt as to whether creative works are produced by either humans or AI. == Track listing ==

    Read more →
  • Render layers

    Render layers

    When creating computer-generated imagery, final scenes appearing in movies and television productions are usually produced by rendering more than one "layer" or "pass," which are multiple images designed to be put together through digital compositing to form a completed frame. Rendering in passes is based on a traditions in motion control photography which predate CGI. As an example, for a visual effects shot, a camera could be programmed to move past a physical model of a spaceship in one pass to film the fully lit beauty pass of the ship, and then to repeat exactly the same camera move passing the ship again to photograph additional elements such as the illuminated windows in the ship or its thrusters. Once all of the passes were filmed, they could then be optically printed together to form a completed shot. The terms render layers and render passes are sometimes used interchangeably. However, rendering in layers refers specifically to separating different objects into separate images, such as a layer each for foreground characters, sets, distant landscape, and sky. On the other hand, rendering in passes refers to separating out different aspects of the scene, such as shadows, highlights, or reflections, into separate images.

    Read more →
  • Fuzzy markup language

    Fuzzy markup language

    Fuzzy Markup Language (FML) is a specific purpose markup language based on XML, used for describing the structure and behavior of a fuzzy system independently of the hardware architecture devoted to host and run it. == Overview == FML was designed and developed by Giovanni Acampora during his Ph.D. course in Computer Science, at University of Salerno, Italy, in 2004. The original idea inspired Giovanni Acampora to create FML was the necessity of creating a cooperative fuzzy-based framework aimed at automatically controlling a living environment characterized by a plethora of heterogeneous devices whose interactions were devoted to maximize the human comfort under energy saving constraints. This framework represented one of the first concrete examples of Ambient Intelligence. Beyond this pioneering application, the major advantage of using XML to describe a fuzzy system is hardware/software interoperability. Indeed, all that is needed to read an FML file is the appropriate schema for that file, and an FML parser. This markup approach makes it much easier to exchange fuzzy systems between software: for example, a machine learning application could extract fuzzy rules which could then be read directly into a fuzzy inference engine or uploaded into a fuzzy controller. Also, with technologies like XSLT, it is possible to compile the FML into the programming language of your choice, ready for embedding into whatever application you please. As stated by Mike Watts on his popular Computational Intelligence blog: "Although Acampora's motivation for developing FML seems to be to develop embedded fuzzy controllers for ambient intelligence applications, FML could be a real boon for developers of fuzzy rule extraction algorithms: from my own experience during my PhD, I know that having to design a file format and implement the appropriate parsers for rule extraction and fuzzy inference engines can be a real pain, taking as much time as implementing the rule extraction algorithm itself. I would much rather have used something like FML for my work." A complete overview of FML and related applications can be found in the book titled On the power of Fuzzy Markup Language edited by Giovanni Acampora, Chang-Shing Lee, Vincenzo Loia and Mei-Hui Wang, and published by Springer in the series Studies on Fuzziness and Soft Computing. == Syntax, grammar and hardware synthesis == FML allows fuzzy systems to be coded through a collection of correlated semantic tags capable of modeling the different components of a classical fuzzy controller such as knowledge base, rule base, fuzzy variables and fuzzy rules. Therefore, the FML tags used to build a fuzzy controller represent the set of lexemes used to create fuzzy expressions. In order to design a well-formed XML-based language, an FML context-free grammar is defined by means of a XML schema which defines name, type and attributes characterized each XML element. However, since an FML program represents only a static view of a fuzzy logic controller, XSLT is provided to change this static view to a computable version. Indeed, XSLTs modules are able to convert the FML-based fuzzy controller in a general purpose computer language using an XSL file containing the translation description. At this level, the control is executable for the hardware. In short, FML is essentially composed by three layers: XML in order to create a new markup language for fuzzy logic control; a XML Schema in order to define the legal building blocks; eXtensible Stylesheet Language Transformations (XSLT) in order to convert a fuzzy controller description into a specific programming language. === Syntax === FML syntax is composed of XML tags and attributes which describe the different components of a fuzzy logic controller listed below: fuzzy knowledge base; fuzzy rule base; inference engine fuzzification subsystem; defuzzification subsystem. In detail, the opening tag of each FML program is which represents the fuzzy controller under modeling. This tag has two attributes: name and ip. The first attribute permits to specify the name of fuzzy controller and ip is used to define the location of controller in a computer network. The fuzzy knowledge base is defined by means of the tag which maintains the set of fuzzy concepts used to model the fuzzy rule base. In order to define the fuzzy concept related controlled system, tag uses a set of nested tags: defines the fuzzy concept; defines a linguistic term describing the fuzzy concept; a set of tags defining a shape of fuzzy sets are related to fuzzy terms. The attributes of tag are: name, scale, domainLeft, domainRight, type and, for only an output, accumulation, defuzzifier and defaultValue. The name attribute defines the name of fuzzy concept, for instance, temperature; scale is used to define the scale used to measure the fuzzy concept, for instance, Celsius degree; domainLeft and domainRight are used to model the universe of discourse of fuzzy concept, that is, the set of real values related to fuzzy concept, for instance [0°,40°] in the case of Celsius degree; the position of fuzzy concept into rule (consequent part or antecedent part) is defined by type attribute (input/output); accumulation attribute defines the method of accumulation that is a method that permits the combination of results of a variable of each rule in a final result; defuzzifier attribute defines the method used to execute the conversion from a fuzzy set, obtained after aggregation process, into a numerical value to give it in output to system; defaultValue attribute defines a real value used only when no rule has fired for the variable at issue. As for tag , it uses two attributes: name used to identify the linguistic value associate with fuzzy concept and complement, a boolean attribute that defines, if it is true, it is necessary to consider the complement of membership function defined by given parameters. Fuzzy shape tags, used to complete the definition of fuzzy concept, are: Every shaping tag uses a set of attributes which defines the real outline of corresponding fuzzy set. The number of these attributes depends on the chosen fuzzy set shape. In order to make an example, consider the Tipper Inference System described in Mathworks Matlab Fuzzy Logic Toolbox Tutorial. This Mamdani system is used to regulate the tipping in, for example, a restaurant. It has got two variables in input (food and service) and one in output (tip). FML code for modeling part of knowledge base of this fuzzy system containing variables food and tip is shown below. A special tag that can furthermore be used to define a fuzzy shape is . This tag is used to customize fuzzy shape (custom shape). The custom shape modeling is performed via a set of tags that lists the extreme points of geometric area defining the custom fuzzy shape. Obviously, the attributes used in tag are x and y coordinates. As for rule base component, FML allows to define a set of rule bases, each one of them describes a different behavior of system. The root of each rule base is modeled by tag which defines a fuzzy rule set. The tag uses five attributes: name, type, activationMethod, andMethod and orMethod. Obviously, the name attribute uniquely identifies the rule base. The type attribute permits to specify the kind of fuzzy controller (Mamdani or TSK) respect to the rule base at issue. The activationMethod attribute defines the method used to implication process; the andMethod and orMethod attribute define, respectively, the and and or algorithm to use by default. In order to define the single rule the tag is used. The attributes used by the tag are: name, connector, operator and weight. The name attribute permits to identify the rule; connector is used to define the logical operator used to connect the different clauses in antecedent part (and/or); operator defines the algorithm to use for chosen connector; weight defines the importance of rule during inference engine step. The definition of antecedent and consequent rule part is obtained by using and tags. tag is used to model the fuzzy clauses in antecedent and consequent part. This tag use the attribute modifier to describe a modification to term used in the clause. The possible values for this attribute are: above, below, extremely, intensify, more or less, norm, not, plus, slightly, somewhat, very, none. To complete the definition of fuzzy clause the nested and tags have to be used. A sequence of tags realizes a fuzzy rule base. As example, consider a Mamdani rule composed by (food is rancid) OR (servi

    Read more →
  • Painworth

    Painworth

    PainWorth is a justice, legal and insurance services application founded by Canadian entrepreneurs Mike Zouhri, Chris Trudel and Ryan Bencic. The application is a "robot lawyer" that uses artificial intelligence to automate personal injury claims for injury victims. It is currently available in Canada and the United States. PainWorth has been featured by several news outlets, including CTV, Global News, CBC, and has also been featured by the American Bar Association and LexisNexis for its role addressing social issues such as access to justice and other systemic issues in the legal and insurance industry. == Application == PainWorth began as a tool for calculating non-pecuniary damages for injury victims but has since expanded beyond a personal injury calculator to include features that help injury victims and business users with pecuniary damages, economic calculations, prescribed rates and providing informational guides to help navigate settlement negotiation, managing claims records and other issues encountered by self-represented litigants or claims managers. The platform makes use of automation to provide free user-guided calculations, steps and processes to successfully settle an injury claim. The application is supported by Microsoft Azure. == Personal Injury Calculator == PainWorth is the first service to use Artificial Intelligence to interpret case law in order to determine the value of pain and suffering incurred by specific injury types and injury severities. The cited case law is used as evidence and presented in statistical models to determine an accurate valuation compliant with the jurisdiction, regulatory rules and case complexities. == General Damages Calculator == PainWorth also offers a personal injury settlement calculator that assesses general damages based on specific case complexities and jurisdiction. The service takes into account medical complications and recovery in order to calculate the fair valuation. == Injury Settlement Platform == PainWorth insurance settlement platform facilitates a direct and automated way resolution center to settle cases for their assessed value without enduring the hardship of litigation. In 2021, Painworth won the title of World's Best Emerging Insurance Product for the development of this platform. == History == In 2019, Mike Zouhri was struck by a drunk driver which left him seriously injured and resulted in a lawsuit. Frustrated by the slow and expensive process, Zouhri went down to the law library and learned how to manage injury claims. After learning the process, he partnered lawyers and legal advisors to create an app to allow users to quickly settle their own injury claims fairly and accurately. Immediately after its launch, PainWorth quickly became widely used by thousands of users and gained significant media coverage. Global News reported that the bot had successfully helped people with more than $10 million in claims in only a few short months, all free of charge. In July 2020, PainWorth began raising concern over injustices and gender bias in the legal system. in Canadian courts.

    Read more →
  • Random-fuzzy variable

    Random-fuzzy variable

    In measurements, the measurement obtained can suffer from two types of uncertainties. The first is the random uncertainty which is due to the noise in the process and the measurement. The second contribution is due to the systematic uncertainty which may be present in the measuring instrument. Systematic errors, if detected, can be easily compensated as they are usually constant throughout the measurement process as long as the measuring instrument and the measurement process are not changed. But it can not be accurately known while using the instrument if there is a systematic error and if there is, how much? Hence, systematic uncertainty could be considered as a contribution of a fuzzy nature. This systematic error can be approximately modeled based on our past data about the measuring instrument and the process. Statistical methods can be used to calculate the total uncertainty from both systematic and random contributions in a measurement. However, the computational complexity is very high, and hence not desirable. L.A.Zadeh introduced the concepts of fuzzy variables and fuzzy sets. Fuzzy variables are based on the theory of possibility and hence are possibility distributions. This makes them suitable to handle any type of uncertainty, i.e., both systematic and random contributions to the total uncertainty. Random-fuzzy variable (RFV) is a type 2 fuzzy variable, defined using the mathematical possibility theory, used to represent the entire information associated to a measurement result. It has an internal possibility distribution and an external possibility distribution called membership functions. The internal distribution is the uncertainty contributions due to the systematic uncertainty and the bounds of the RFV are because of the random contributions. The external distribution gives the uncertainty bounds from all contributions. == Definition == A random-fuzzy Variable (RFV) is defined as a type 2 fuzzy variable which satisfies the following conditions: Both the internal and the external functions of the RFV can be identified. Both the internal and the external functions are modeled as possibility distributions (PD). Both the internal and external functions have a unitary value for possibility to the same interval of values. An RFV can be seen in the figure. The external membership function is the distribution in blue and the internal membership function is the distribution in red. Both the membership functions are possibility distributions. Both the internal and external membership functions have a unitary value of possibility only in the rectangular part of the RFV. Therefore, all three conditions have been satisfied. If there are only systematic errors in the measurement, then the RFV simply becomes a fuzzy variable which consists of just the internal membership function. Similarly, if there is no systematic error, then the RFV becomes a fuzzy variable with just the random contributions and therefore, is just the possibility distribution of the random contributions. == Construction == A random-fuzzy variable can be constructed using an internal possibility distribution (rinternal) and a random possibility distribution (rrandom). === The random distribution (rrandom) === rrandom is the possibility distribution of the random contributions to the uncertainty. Any measurement instrument or process suffers from random error contributions due to intrinsic noise or other effects. This is completely random in nature and is a normal probability distribution when several random contributions are combined according to the central limit theorem. However, there can also be random contributions from other probability distributions, such as a uniform distribution, gamma distribution and so on. The probability distribution can be modeled from the measurement data. Then, the probability distribution can be used to model an equivalent possibility distribution using the maximally specific probability-possibility transformation. Some common probability distributions and the corresponding possibility distributions can be seen in the figures. === The internal distribution (rinternal) === rinternal is the internal distribution in the RFV which is the possibility distribution of the systematic contribution to the total uncertainty. This distribution can be built based on the information that is available about the measuring instrument and the process. The largest possible distribution is the uniform or rectangular possibility distribution. This means that every value in the specified interval is equally possible. This actually represents the state of total ignorance according to the theory of evidence which means it represents a scenario in which there is maximum lack of information. This distribution is used for the systematic error when we have absolutely no idea about the systematic error except that it belongs to a particular interval of values. This is quite common in measurements. However, in certain cases, it may be known that certain values have a higher or lower degrees of belief than certain other values. In this case, depending on the degrees of belief for the values, an appropriate possibility distribution could be constructed. === The construction of the external distribution (rexternal) and the RFV === After modeling the random and internal possibility distribution, the external membership function, rexternal, of the RFV can be constructed by using the following equation: where x ∗ {\displaystyle x^{}} is the mode of r random {\displaystyle r_{\textit {random}}} , which is the peak in the membership function of r r a n d o m {\displaystyle r_{random}} and Tmin is the minimum triangular norm. RFV can also be built from the internal and random distributions by considering the α-cuts of the two possibility distributions (PDs). An α-cut of a fuzzy variable F can be defined as Therefore, essentially an α-cut is the set of values for which the value of the membership function μ F ( a ) {\displaystyle \mu _{\rm {F}}(a)} of the fuzzy variable is greater than α. This gives the upper and lower bounds of the fuzzy variable F for each α-cut. The α-cut of an RFV, however, has 4 specific bounds and is given by R F V α = [ X a α , X b α , X c α , X d α ] {\displaystyle RFV^{\alpha }=[X_{a}^{\alpha },X_{b}^{\alpha },X_{c}^{\alpha },X_{d}^{\alpha }]} . X a α {\displaystyle X_{a}^{\alpha }} and X d α {\displaystyle X_{d}^{\alpha }} are the lower and upper bounds respectively of the external membership function (rexternal) which is a fuzzy variable on its own. X b α {\displaystyle X_{b}^{\alpha }} and X c α {\displaystyle X_{c}^{\alpha }} are the lower and upper bounds respectively of the internal membership function (rinternal) which is a fuzzy variable on its own. To build the RFV, let us consider the α-cuts of the two PDs i.e., rrandom and rinternal for the same value of α. This gives the lower and upper bounds for the two α-cuts. Let them be [ X L R α , X U R α ] {\displaystyle [X_{LR}^{\alpha },X_{UR}^{\alpha }]} and [ X L I α , X U I α ] {\displaystyle [X_{LI}^{\alpha },X_{UI}^{\alpha }]} for the random and internal distributions respectively. [ X L R α , X U R α ] {\displaystyle [X_{LR}^{\alpha },X_{UR}^{\alpha }]} can be again divided into two sub-intervals [ X L R α , x ∗ ] {\displaystyle [X_{LR}^{\alpha },x^{}]} and [ x ∗ , X U R α ] {\displaystyle [x^{},X_{UR}^{\alpha }]} where x ∗ {\displaystyle x^{}} is the mode of the fuzzy variable. Then, the α-cut for the RFV for the same value of α, R F V α = [ X a α , X b α , X c α , X d α ] {\displaystyle RFV^{\alpha }=[X_{a}^{\alpha },X_{b}^{\alpha },X_{c}^{\alpha },X_{d}^{\alpha }]} can be defined by Using the above equations, the α-cuts are calculated for every value of α which gives us the final plot of the RFV. A random-fuzzy variable is capable of giving a complete picture of the random and systematic contributions to the total uncertainty from the α-cuts for any confidence level as the confidence level is nothing but 1-α. An example for the construction of the corresponding external membership function (rexternal) and the RFV from a random PD and an internal PD can be seen in the following figure.

    Read more →
  • Lenna

    Lenna

    Lenna (or Lena) is a standard test image used in the field of digital image processing, starting in 1973. It is a picture of the Swedish model Lena Forsén, shot by photographer Dwight Hooker and cropped from the centerfold of the November 1972 issue of Playboy magazine. Lenna has attracted controversy because of its subject matter. Starting in the mid-2010s, many journals have deemed it inappropriate and discouraged its use, while others have banned it from publication outright. Forsén herself has called for it to be retired, saying "It's time I retired from tech." The spelling "Lenna" came from the model's desire to encourage the proper pronunciation of her name. "I didn't want to be called Leena [English: ]," she explained. == History == Before Lenna, the first use of a Playboy magazine image to illustrate image processing algorithms was in 1961. Lawrence G. Roberts used two cropped six-bit grayscale facsimile scanned images from Playboy's July 1960 issue featuring Playmate Teddi Smith, in his master's thesis on image dithering at Massachusetts Institute of Technology. Lenna was originally intended for high resolution color image processing study. Its history was described in the May 2001 newsletter of the IEEE Professional Communication Society, in an article by Jamie Hutchinson: Alexander Sawchuk estimates that it was in June or July of 1973 when he, then an assistant professor of electrical engineering at the University of Southern California Signal and Image Processing Institute (SIPI), along with a graduate student and the SIPI lab manager, was hurriedly searching the lab for a good image to scan for a colleague's conference paper. They got tired of their stock of usual test images, dull stuff dating back to television standards work in the early 1960s. They wanted something glossy to ensure good output dynamic range, and they wanted a human face. Just then, somebody happened to walk in with a recent issue of Playboy. The engineers tore away the top third of the centerfold so they could wrap it around the drum of their Muirhead wirephoto scanner, which they had outfitted with analog-to-digital converters (one each for the red, green, and blue channels) and a Hewlett Packard 2100 minicomputer. The Muirhead had a fixed resolution of 100 lines per inch and the engineers wanted a 512×512 image, so they limited the scan to the top 5.12 inches of the picture, effectively cropping it at the subject's shoulders. The image's reach was limited in the 1970s and 80s, which is reflected in it initially only appearing in .org domains, but in July 1991, the image featured on the cover of Optical Engineering alongside Peppers, another popular test image. This drew the attention of Playboy to the potential copyright infringement. The peak of image hits on the internet was in 1995. The scan became one of the most used images in computer history. The use of the photo in electronic imaging has been described as "clearly one of the most important events in [its] history". The image spread to over 100 different domains, particularly .com and .edu. In a 1999 issue of IEEE Transactions on Image Processing "Lena" was used in three separate articles, and the picture continued to appear in scientific journals throughout the beginning of the 21st century. Lenna is so widely accepted in the image processing community that Forsén was a guest at the 50th annual Conference of the Society for Imaging Science and Technology (IS&T) in 1997. In 2015, Lena Forsén was also guest of honor at the banquet of IEEE ICIP 2015. After delivering a speech, she chaired the best paper award ceremony. To explain why the image became a standard in the field, David C. Munson, editor-in-chief of IEEE Transactions on Image Processing, stated that it was a good test image because of its detail, flat regions, shading, and texture. He also noted that "the Lena image is a picture of an attractive woman. It is not surprising that the (mostly male) image processing research community gravitated toward an image that they found attractive." While Playboy often cracks down on illegal uses of its material and did initially send a notice to the publisher of Optical Engineering about its unauthorized use in that publication, over time it has decided to overlook the wide use of Lena. Eileen Kent, VP of new media at Playboy, said, "We decided we should exploit this, because it is a phenomenon." == Criticism == The use of the image has produced controversy because Playboy is "seen (by some) as being degrading to women". In a 1999 essay on reasons for the male predominance in computer science, applied mathematician Dianne P. O'Leary wrote: Suggestive pictures used in lectures on image processing ... convey the message that the lecturer caters to the males only. For example, it is amazing that the "Lena" pin-up image is still used as an example in courses and published as a test image in journals today. A 2012 paper on compressed sensing used a photo of the model Fabio Lanzoni as a test image to draw attention to this issue. The use of the test image at the magnet school Thomas Jefferson High School for Science and Technology in Fairfax County, Virginia, provoked a guest editorial by a senior in The Washington Post in 2015 about its detrimental impact on aspiring female students in computer science. In 2017, the Journal of Modern Optics published an editorial titled "On alternatives to Lenna" suggesting three images (Pirate, Cameraman, and Peppers) that "are reasonably close to Lenna in feature space". In 2018, the Nature Nanotechnology journal announced that they would no longer consider articles using Lenna. In the same year SPIE, the publishers of Optical Engineering, also announced that they "strongly discourage" the use of Lenna, and would no longer consider new submissions containing the image "without convincing scientific justification for its use". They noted that aside from the copyright and ethical issues, that it was also no longer useful as a standard image: "In today's age of high-resolution digital image technology, it seems difficult to argue that a 512 × 512 image produced with a 1970s-era analog scanner is the best we have to offer as an image quality test standard". Forsén stated in the 2019 documentary film Losing Lena, "I retired from modeling a long time ago. It's time I retired from tech, too... Let's commit to losing me." The Institute of Electrical and Electronics Engineers (IEEE) announced that, starting April 1, 2024, it will no longer allow use of Lenna in its publications.

    Read more →
  • Computing Machinery and Intelligence

    Computing Machinery and Intelligence

    "Computing Machinery and Intelligence" is a paper written by Alan Turing on the topic of artificial intelligence. The paper, published in 1950 in Mind, was the first to introduce his concept of what is now known as the Turing test to the general public. Turing's paper considers the question "Can machines think?" Turing says that since the words "think" and "machine" cannot clearly be defined, we should "replace the question by another, which is closely related to it and is expressed in relatively unambiguous words." To achieve this objective, Turing proposes a three-step approach. First, he identifies a simple and unambiguous concept to substitute for the term "think." Second, he delineates the specific "machines" under consideration. Third, armed with these tools, he poses a new question related to the first, which he believes he can answer in the affirmative. == Turing's test == Rather than trying to determine if a machine is thinking, Turing suggests we should ask if the machine can win a game, called the "Imitation Game". The original Imitation game, that Turing described, is a simple party game involving three players. Player A is a man, player B is a woman and player C (who plays the role of the interrogator) can be of either sex. In the Imitation Game, player C is unable to see either player A or player B (and knows them only as X and Y), and can communicate with them only through written notes or any other form that does not give away any details about their gender. By asking questions of player A and player B, player C tries to determine which of the two is the man and which is the woman. Player A's role is to trick the interrogator into making the wrong decision, while player B attempts to assist the interrogator in making the right one. Turing proposes a variation of this game that involves the computer: We now ask the question, "What will happen when a machine takes the part of A in this game?" Will the interrogator decide wrongly as often when the game is played like this as he does when the game is played between a man and a woman? These questions replace our original, "Can machines think?" So the modified game becomes one that involves three participants in isolated rooms: a computer (which is being tested), a human, and a (human) judge. The human judge can converse with both the human and the computer by typing into a terminal. Both the computer and the human try to convince the judge that they are the human. If the judge cannot consistently tell which is which, then the computer wins the game. Researchers in the United Kingdom had been exploring "machine intelligence" for up to ten years prior to the founding of the field of artificial intelligence (AI) research in 1956. It was a common topic among the members of the Ratio Club, an informal group of British cybernetics and electronics researchers that included Alan Turing. Turing, in particular, had been running the notion of machine intelligence since at least 1941 and one of the earliest-known mentions of "computer intelligence" was made by him in 1947. As Stevan Harnad notes, the question has become "Can machines do what we (as thinking entities) can do?" In other words, Turing is no longer asking whether a machine can "think"; he is asking whether a machine can act indistinguishably from the way a thinker acts. This question avoids the difficult philosophical problem of pre-defining the verb "to think" and focuses instead on the performance capacities that being able to think makes possible, and how a causal system can generate them. Since Turing introduced his test, it has been both highly influential and widely criticised, and has become an important concept in the philosophy of artificial intelligence. Some of its criticisms, such as John Searle's Chinese room, are themselves controversial. Some have taken Turing's question to have been "Can a computer, communicating over a teleprinter, fool a person into believing it is human?" but it seems clear that Turing was not talking about fooling people but about generating human cognitive capacity. == Digital machines == Turing also notes that we need to determine which "machines" we wish to consider. He points out that a human clone, while man-made, would not provide a very interesting example. Turing suggested that we should focus on the capabilities of digital machinery—machines which manipulate the binary digits of 1 and 0, rewriting them into memory using simple rules. He gave two reasons. First, there is no reason to speculate whether or not they can exist. They already did in 1950. Second, digital machinery is "universal". Turing's research into the foundations of computation had proved that a digital computer can, in theory, simulate the behaviour of any other digital machine, given enough memory and time. (This is the essential insight of the Church–Turing thesis and the universal Turing machine.) Therefore, if any digital machine can "act like it is thinking", then every sufficiently powerful digital machine can. Turing writes, "all digital computers are in a sense equivalent." This allows the original question to be made even more specific. Turing now restates the original question as "Let us fix our attention on one particular digital computer C. Is it true that by modifying this computer to have an adequate storage, suitably increasing its speed of action, and providing it with an appropriate programme, C can be made to play satisfactorily the part of A in the imitation game, the part of B being taken by a man?" Hence, Turing states that the focus is not on "whether all digital computers would do well in the game nor whether the computers that are presently available would do well, but whether there are imaginable computers which would do well". What is more important is to consider the advancements possible in the state of our machines today regardless of whether we have the available resource to create one or not. == Nine common objections == Having clarified the question, Turing turned to answering it: he considered the following nine common objections, which include all the major arguments against artificial intelligence raised in the years since his paper was first published. Religious Objection: This states that thinking is a function of man's immortal soul; therefore, a machine cannot think. "In attempting to construct such machines," wrote Turing, "we should not be irreverently usurping His power of creating souls, any more than we are in the procreation of children: rather we are, in either case, instruments of His will providing mansions for the souls that He creates." 'Heads in the Sand' Objection: "The consequences of machines thinking would be too dreadful. Let us hope and believe that they cannot do so." This thinking is popular among intellectual people, as they believe superiority derives from higher intelligence and the possibility of being overtaken is a threat (as machines have efficient memory capacities and processing speed, machines exceeding the learning and knowledge capabilities are highly probable). This objection is a fallacious appeal to consequences, confusing what should not be with what can or cannot be (Wardrip-Fruin, 56). The Mathematical Objection: This objection uses mathematical theorems, such as Gödel's incompleteness theorem, to show that there are limits to what questions a computer system based on logic can answer. Turing suggests that humans are too often wrong themselves and pleased at the fallibility of a machine. (This argument would be made again by philosopher John Lucas in 1961 and physicist Roger Penrose in 1989, and later would be called Penrose–Lucas argument.) Argument From Consciousness: This argument, suggested by Professor Geoffrey Jefferson in his 1949 Lister Oration (acceptance speech for his 1948 award of Lister Medal) states that "not until a machine can write a sonnet or compose a concerto because of thoughts and emotions felt, and not by the chance fall of symbols, could we agree that machine equals brain." Turing replies by saying that we have no way of knowing that any individual other than ourselves experiences emotions, and that therefore we should accept the test. He adds, "I do not wish to give the impression that I think there is no mystery about consciousness ... [b]ut I do not think these mysteries necessarily need to be solved before we can answer the question [of whether machines can think]." (This argument, that a computer can't have conscious experiences or understanding, would be made in 1980 by philosopher John Searle in his Chinese room argument. Turing's reply is now known as the "other minds reply". See also Can a machine have a mind? in the philosophy of AI.) Arguments from various disabilities. These arguments all have the form "a computer will never do X". Turing offers a selection:Be kind, resourceful, beautiful, friendly, have initiative, have a sense of humour, tell right from wrong, make mistakes, fall in love, enjo

    Read more →
  • Conference on Neural Information Processing Systems

    Conference on Neural Information Processing Systems

    The Conference on Neural Information Processing Systems (abbreviated as NeurIPS and formerly NIPS) is a machine learning and computational neuroscience conference held annually in December. Along with ICLR and ICML, it is one of the three primary conferences of high impact in machine learning and artificial intelligence research. The conference includes three days of invited talks along with oral and poster presentations of refereed papers, followed by two days of workshops and competitions. == History == The NeurIPS meeting was first proposed in 1986 at the annual invitation-only Snowbird Meeting on Neural Networks for Computing organized by The California Institute of Technology and Bell Laboratories. NeurIPS was designed as a complementary open interdisciplinary meeting for researchers exploring biological and artificial Neural Networks. Reflecting this multidisciplinary approach, NeurIPS began in 1987 with information theorist Ed Posner as the conference president and learning theorist Yaser Abu-Mostafa as program chairman. Research presented in the early NeurIPS meetings included a wide range of topics from efforts to solve purely engineering problems to the use of computer models as a tool for understanding biological nervous systems. Since then, the biological and artificial systems research streams have diverged, and recent NeurIPS proceedings have been dominated by papers on machine learning, artificial intelligence and statistics. From 1987 until 2000 NeurIPS was held in Denver, United States. Since then, the conference was held in Vancouver, Canada (2001–2010), Granada, Spain (2011), and Lake Tahoe, United States (2012–2013). In 2014 and 2015, the conference was held in Montreal, Canada, in Barcelona, Spain in 2016, in Long Beach, United States in 2017, in Montreal, Canada in 2018 and Vancouver, Canada in 2019. Reflecting its origins at Snowbird, Utah, the meeting was accompanied by workshops organized at a nearby ski resort up until 2013, when it outgrew ski resorts. The first NeurIPS Conference was sponsored by the IEEE. The following NeurIPS Conferences have been organized by the NeurIPS Foundation, established by Ed Posner. Terrence Sejnowski has been the president of the NeurIPS Foundation since Posner's death in 1993. The board of trustees consists of previous general chairs of the NeurIPS Conference. The first proceedings was published in book form by the American Institute of Physics in 1987, and was entitled Neural Information Processing Systems, then the proceedings from the following conferences have been published by Morgan Kaufmann (1988–1993), MIT Press (1994–2004) and Curran Associates (2005–present) under the name Advances in Neural Information Processing Systems. The conference was originally abbreviated as "NIPS". By 2018 a few commentators were criticizing the abbreviation as encouraging sexism due to its association with the word nipples, and as being a slur against Japanese. The board changed the abbreviation to "NeurIPS" in November 2018. == Topics == Along with machine learning and neuroscience, other fields represented at NeurIPS include cognitive science, psychology, computer vision, statistical linguistics, and information theory. Over the years, NeurIPS became a premier conference on machine learning and although the 'Neural' in the NeurIPS acronym had become something of a historical relic, the resurgence of deep learning in neural networks since 2012, fueled by faster computers and big data, has led to achievements in speech recognition, object recognition in images, image captioning, language translation and world championship performance in the game of Go, based on neural architectures inspired by the hierarchy of areas in the visual cortex (ConvNet) and reinforcement learning inspired by the basal ganglia (Temporal difference learning). Notable affinity groups have emerged from the NeurIPS conference and displayed diversity, including Black in AI (in 2017), Queer in AI (in 2016), and others. === Named lectures === In addition to invited talks and symposia, NeurIPS also organizes two named lectureships to recognize distinguished researchers. The NeurIPS Board introduced the Posner Lectureship in honor of NeurIPS founder Ed Posner; two Posner Lectures were given each year up to 2015. Past lecturers have included: 2010 – Josh Tenenbaum and Michael I. Jordan 2011 – Rich Sutton and Bernhard Schölkopf 2012 – Thomas Dietterich and Terry Sejnowski 2013 – Daphne Koller and Peter Dayan 2014 – Michael Kearns and John Hopfield 2015 – Zoubin Ghahramani and Vladimir Vapnik 2016 – Yann LeCun 2017 – John Platt 2018 – Joëlle Pineau 2019 – Yoshua Bengio 2020 – Christopher Bishop 2021 – Peter Bartlett In 2015, the NeurIPS Board introduced the Breiman Lectureship to highlight work in statistics relevant to conference topics. The lectureship was named for statistician Leo Breiman, who served on the NeurIPS Board from 1994 to 2005. Past lecturers have included: 2015 – Robert Tibshirani 2016 – Susan Holmes 2017 – Yee Whye Teh 2018 – David Spiegelhalter 2019 – Bin Yu 2020 – Marloes Maathuis 2021 – Gabor Lugosi 2022 – Emmanuel Candes 2023 – Susan Murphy 2024 – Arnaud Doucet == NeurIPS consistency experiment == In NIPS 2014, the program chairs duplicated 10% of all submissions and sent them through separate reviewers to evaluate randomness in the reviewing process. Several researchers interpreted the result. Regarding whether the decision in NIPS is completely random or not, John Langford writes: "Clearly not—a purely random decision would have arbitrariness of ~78%. It is, however, quite notable that 60% is much closer to 78% than 0%." He concludes that the result of the reviewing process is mostly arbitrary. In NeurIPS 2021, the program chairs repeated the 2014 experiment and found similar levels of review inconsistency; 23% of duplicated submissions received different accept/reject decisions, and 50.6% of accepted papers would have been rejected under re-review. == Locations == 1987–2000: Denver, Colorado, United States 2001–2010: Vancouver, British Columbia, Canada 2011: Granada, Spain 2012 & 2013: Stateline, Nevada, United States 2014 & 2015: Montréal, Quebec, Canada 2016: Barcelona, Spain 2017: Long Beach, California, United States 2018: Montréal, Quebec, Canada 2019: Vancouver, British Columbia, Canada 2020: Vancouver, British Columbia, Canada (virtual conference) 2021: Virtual conference 2022 & 2023: New Orleans, Louisiana, United States 2024: Vancouver, British Columbia, Canada 2025: San Diego, California, United States and Mexico City, Mexico 2026: Sydney, New South Wales, Australia, with satellite events in Atlanta and Paris

    Read more →
  • Privacy Lost

    Privacy Lost

    Privacy Lost is a 2023 short science fiction film directed by Peter Stoel and Robert Berger. It follows a family using augmented reality (AR) and artificial intelligence (AI) devices capable of reading emotional states, raising questions about privacy and manipulation. == Premise == Privacy Lost follows a family using AR glasses that capture and interpret emotions in real time. As the parents argue in a restaurant, their emotional states and even hidden feelings become visible through these glasses. An AI-driven waiter adapts its appearance for each family member, employing emotional data to influence their decisions. == Cast == Brian Kant as Waiter Michael Krass as Husband Estelle Levinson as Waitress Thor van der Linden as Scotty Carlijn van Ramshorst as Wife == Production == Filming took place at HeadQ Productions, a virtual studio located in Amsterdam. The creators sought to depict a near-future scenario in which real-time emotion analysis becomes part of daily interactions. The film was screened at the Augmented World Expo (AWE), where it was noted for its thematic focus on AI-driven manipulation and emotional tracking. The depiction of AR glasses and AI characters integrates modern visual effects to show how devices might analyze emotional responses in real time. It also depicts how AI-driven interactions could influence consumer decisions, pointing to concerns over potential misuse. == Themes == Privacy Lost focuses on the intersection of advanced AI capabilities and AR environments, showing how real-time emotional analysis can be leveraged for targeted persuasion. The film aims to highlight the social and ethical implications of emerging AR and AI technologies, underlining how establishing clear regulatory frameworks for them is necessary to protect individual privacy, govern the storage of emotion-based data, and prevent manipulative practices. Critics describe the film’s theme as dystopian and note that such a reality is unlikely to occur in the near future. However, despite the exaggerated scenario, the film emphasizes the importance of a responsible approach by developers toward emerging technologies.

    Read more →
  • Scrolling

    Scrolling

    In computer displays, filmmaking, television production, video games and other kinetic displays, scrolling is sliding text, images or video across a monitor or display, vertically or horizontally. "Scrolling," as such, does not change the layout of the text or pictures but moves (pans or tilts) the user's view across what is apparently a larger image that is not wholly seen. A common television and movie special effect is to scroll credits, while leaving the background stationary. Scrolling may take place completely without user intervention (as in film credits) or, on an interactive device, be triggered by touchscreen or a keypress and continue without further intervention until a further user action, or be entirely controlled by input devices. Scrolling may take place in discrete increments (perhaps one or a few lines of text at a time), or continuously (smooth scrolling). Frame rate is the speed at which an entire image is redisplayed. It is related to scrolling in that changes to text and image position can only happen as often as the image can be redisplayed. When frame rate is a limiting factor, one smooth scrolling technique is to blur images during movement that would otherwise appear to "jump". == Computing == === Implementation === Scrolling is often carried out on a computer by the CPU (software scrolling) or by a graphics processor. Some systems feature hardware scrolling, where an image may be offset as it is displayed, without any frame buffer manipulation (see also hardware windowing). This was especially common in 8 and 16bit video game consoles. === UI paradigms === In a WIMP-style graphical user interface (GUI), user-controlled scrolling is carried out by manipulating a scrollbar with a mouse, or using keyboard shortcuts, often the arrow keys. Scrolling is often supported by text user interfaces and command line interfaces. Older computer terminals changed the entire contents of the display one screenful ("page") at a time; this paging mode requires fewer resources than scrolling. Scrolling displays often also support page mode. Typically certain keys or key combinations page up or down; on PC-compatible keyboards the page up and page down keys or the space bar are used; earlier computers often used control key combinations. Some computer mice have a scroll wheel, which scrolls the display, often vertically, when rolled; others have scroll balls or tilt wheels which allow both vertical and horizontal scrolling. Some software supports other ways of scrolling. Adobe Reader has a mode identified by a small hand icon ("hand tool") on the document, which can then be dragged by clicking on it and moving the mouse as if sliding a large sheet of paper. When this feature is implemented on a touchscreen it is called kinetic scrolling. Touch-screens often use inertial scrolling, in which the scrolling motion of an object continues in a decaying fashion after release of the touch, simulating the appearance of an object with inertia. An early implementation of such behavior was in the "Star7" PDA of Sun Microsystems ca. 1991–1992. Scrolling can be controlled in other software-dependent ways by a PC mouse. Some scroll wheels can be pressed down, functioning like a button. Depending on the software, this allows both horizontal and vertical scrolling by dragging in the direction desired; when the mouse is moved to the original position, scrolling stops. A few scroll wheels can also be tilted, scrolling horizontally in one direction until released. On touchscreen devices, scrolling is a multi-touch gesture, done by swiping a finger on the screen vertically in the direction opposite to where the user wants to scroll to. If any content is too wide to fit on a display, horizontal scrolling is required to view all of it. In applications such as graphics and spreadsheets there is often more content than can fit either the width or the height of the screen at a comfortable scale, and scrolling in both directions is necessary. === Infinite scrolling === In contrast to material divided into discrete pages, the web design approach of infinite scrolling dynamically adds new material to the user display, leading to a continuous, apparently bottomless or endless scrolling experience. === Text === In languages written horizontally, such as most Western languages, text documents longer than will fit on the screen are often displayed wrapped and sized to fit the screen width, and scrolled vertically to bring desired content into view. It is possible to display lines too long to fit the display without wrapping, scrolling horizontally to view each entire line. However, this requires inconvenient constant line-by-line scrolling, while vertical scrolling is only needed after reading a full screenful. Software such as word processors and web browsers normally uses word-wrapping to display as many words in a single line as will fit the width of the screen or window or, for text organised in columns, each column. === Demos === Scrolling texts, also referred to as scrolltexts or scrollers, played an important part in the birth of the computer demo culture. The software crackers often used their deep knowledge of computer platforms to transform the information that accompanied their releases into crack intros. The sole role of these intros was to scroll the text on the screen in an impressive way. == Film and television == Scrolling is commonly used to display the credits at the end of films and television programs. Scrolling is often used in the form of a news ticker towards the bottom of the picture for content such as television news, scrolling sideways across the screen, delivering short-form content. In the dynamic layout of kinetic typography, scrolling typography can scroll across the flat screen, or can appear to recede or advance. An iconic example is the Star Wars opening crawl inspired by the Flash Gordon serials. == Video games == In computer and video games, scrolling of a playing field allows the player to control an object in a large contiguous area. Early examples of this method include Taito's 1974 vertical-scrolling racing video game Speed Race, Sega's 1976 forward-scrolling racing games Moto-Cross (Fonz) and Road Race, and Super Bug. Previously the flip-screen method was used to indicate moving backgrounds. The Namco Galaxian arcade system board introduced with Galaxian in 1979 pioneered a sprite system that animated pre-loaded sprites over a scrolling background, which became the basis for Nintendo's Radar Scope and Donkey Kong arcade hardware and home consoles such as the Nintendo Entertainment System. Parallax scrolling, which was first featured in Moon Patrol, involves several semi-transparent layers (called playfields), which scroll on top of each other at varying rates in order to give an early pseudo-3D illusion of depth. Belt scrolling is a method used in side-scrolling beat 'em up games with a downward camera angle where players can move up and down in addition to left and right. == Studies == A 1993 article by George Fitzmaurice studied spatially aware palmtop computers. These devices had a 3D sensor, and moving the device caused the contents to move as if the contents were fixed in place. This interaction could be referred to as “moving to scroll.” Also, if the user moved the device away from their body, they would zoom in; conversely, the device would zoom out if the user pulled the device closer to them. Smartphone cameras and “optical flow” image analysis utilize this technique nowadays. A 1996 research paper by Jun Rekimoto analyzed tilting operations as scrolling techniques on small screen interfaces. Users could not only tilt to scroll, but also tilt to select menu items. These techniques proved especially useful for field workers, since they only needed to hold and control the device with one hand. A study from 2013 by Selina Sharmin, Oleg Špakov, and Kari-Jouko Räihä explored the action of reading text on a screen while the text auto-scrolls based on the user's eye tracking patterns. The control group simply read text on a screen and manually scrolled. The study found that participants preferred to read primarily at the top of the screen, so the screen scrolled down whenever participants’ eyes began to look toward the bottom of the screen. This auto-scrolling caused no statistically significant difference in reading speed or performance. An undated study occurring during or after 2010 by Dede Frederick, James Mohler, Mihaela Vorvoreanu, and Ronald Glotzbach noted that parallax scrolling "may cause certain people to experience nausea."

    Read more →
  • Google AI Studio

    Google AI Studio

    Google AI Studio is a web-based integrated development environment developed by Google for prototyping applications using generative AI models. Released in December 2023 alongside the Gemini API, the platform provides access to Google's Gemini family of models and related tools for image, video, and audio generation. The service targets both developers and non-technical users for testing prompts and generating code for the Gemini API. == History == Google launched AI Studio on December 13, 2023, as the successor to Google MakerSuite. MakerSuite, introduced at Google I/O in May 2023, had provided similar functionality for Google's PaLM language models. The AI Studio was launched alongside the public release of the Gemini API. == Features == AI Studio's interface consists of a central prompt area and a settings panel for model selection and parameter adjustment. The platform supports chat prompts for multi-turn conversations and includes system instructions for defining model behavior, tone, or specific rules. Users can employ zero-shot and few-shot prompting techniques to guide the model's output format. The platform processes various media types including video, audio, and documents, and can generate images through Imagen models, videos through Veo models, and audio through text-to-speech functionality. Additional tools include real-time streaming for screen sharing and live analysis, code execution in a sandboxed Python environment, grounding with Google Search for current information, URL context for analyzing specific web pages, and a thinking mode for complex reasoning tasks. == Available models == The platform provides access to several Google AI models including the Gemini language models, Imagen for image generation, Veo for video generation, LearnLM for educational applications, and Gemma, Google's open-source model family. == Privacy and data usage == Google AI Studio's data handling differs between free and paid users. For free tier users, Google uses submitted prompts, uploaded files, and generated responses to improve its products and services, with human reviewers potentially reading and annotating the data after disconnection from user accounts. Google advises against submitting sensitive information on the free tier. Users who enable Google Cloud Billing are considered paid service users, and their data is not used for product improvement. Data is processed according to Google's Data Processing Addendum and retained temporarily for abuse monitoring. == Availability == The platform is available at no cost, with API usage subject to a free tier with daily and per-minute rate limits. Access is restricted to users aged 18 and older in specific countries and territories. The service was initially unavailable in the United Kingdom and European Economic Area due to regulatory concerns, which drew user complaints. == Reception == Reviews have noted the platform's accessibility and integration with Gemini models, with features such as real-time screen sharing and large context windows cited as notable capabilities. However, reviewers have raised concerns about the privacy implications for free tier users, whose data is used for model training. Some users have reported inconsistent performance with features like screen streaming and issues with folder uploads for large datasets. The initial geographic restrictions were a point of criticism among developers in affected regions.

    Read more →
  • Akoma Ntoso

    Akoma Ntoso

    Akoma Ntoso (Architecture for Knowledge-Oriented Management of African Normative Texts using Open Standards and Ontologies, AKN) is an international technical standard for representing legal documents (executive, legislative, and judiciary) in a structured manner using a domain specific, legal XML vocabulary. The term akoma ntoso means "linked hearts" in the Akan language of West Africa. Akoma Ntoso is a legal document standard designed to serve as a basis for modern machine-readable and fully digital legislative and judicial processes. This is achieved by providing a coherent syntax and well-defined semantics to represent legal documents in a digital format. It is designed to be suitable as a common exchange format in all parliamentary, legal and judicial systems around the world. Taking advantage of the shared heritage present in all legal systems, Akoma Ntoso has been developed to have ample flexibility to respond to all the differences in texts, languages, and legal practices. Aiming to expand on certain common practices, the standard therefore has a broad scope. It includes a common extensible model for data (the document content) and metadata (such as bibliographic information and annotations). Specifically, as a common legal document standard for the interchange of legal documents it is designed to be highly flexible in its support of documents and functionalities, maintaining a large set of both structural and semantic building blocks (over 500 entities in version 3.0) for representing this wide variety of document types of virtually all legal traditions. It is extensible in order to allow for modifications to address the individual criteria of organizations or unique aspects of various legal practices and languages without sacrificing interoperability with other systems. Akoma Ntoso is as such part of a wider approach to developing open, non-proprietary technical standards for structuring legal documents and information under the name of Legal XML, which also includes formats and standards for, e.g., eContracts, eNotarization, electronic court filings, the technical representation of legal norms and rules (LegalRuleML) or technical standards for the interfaces of, e.g., litigant portal exchange platforms. Akoma Ntoso allows machine-driven processes to operate on the syntactic and semantic components of digital parliamentary, judicial and legislative documents, thus facilitating the development of high-quality information resources. It can substantially enhance the performance, accountability, quality and openness of parliamentary and legislative operations based on best practices and guidance through machine-assisted drafting and machine-assisted (legal) analysis. Embedded in the environment of the semantic web, it forms the basis for a heterogenous yet interoperable ecosystem, with which these tools can operate and communicate, as well as for future applications and use cases based on digital law or rule representation. == Definition == The Akoma Ntoso standard defines a set of machine readable electronic representations in XML format of the building blocks of parliamentary, legislative and judiciary documents. As official self-description, the standard (...) defines a set of simple, technology-neutral electronic representations of parliamentary, legislative and judiciary documents for e-services in a worldwide context and provides an enabling framework for the effective exchange of "machine readable" parliamentary, legislative and judiciary documents such as legislation, debate record, minutes, judgements, etc. Providing access to primary legal materials, parliamentary works and judiciaries documents is not just a matter of giving physical or on-line access to them. "Open access" requires the information to be described and classified in a uniform and organized way so that content is structured into meaningful elements that can be read and understood by software applications, so that the content is made "machine readable" and more sophisticated applications than on-screen display are made possible. The standard is composed of: an XML vocabulary that defines the mapping between the structure of legal documents and their equivalent in XML; specifications of an XML schema that defines the structure of legal documents in XML. They provide rich possibilities of description for several types of parliamentary, legislative and judiciary document, such as bills, acts and parliamentary records, judgments, or gazettes; a recommended naming convention for providing unique identifiers to legal sources based on FRBR model; a MIME type definition. == History and adoption == Akoma Ntoso started as an UNDESA project in 2004 within the initiative "Strengthening Parliaments' Information Systems in Africa". Its core vocabulary was created mostly by Monica Palmirani and Fabio Vitali, two professors from the Centre for Research in the History, Philosophy, and Sociology of Law and in Computer Science and Law (CIRSFID) of the University of Bologna. A first legislative text editor supporting Akoma Ntoso was developed in 2007 on the base of OpenOffice. In 2010 European Parliament developed an open source web-based application called AT4AM based on Akoma Ntoso for facilitating the production and the management of legislative amendments. Thanks to this project, the application of Akoma Ntoso could be extended to new type of documents (e.g. legislative proposal, transcript) and to other scenarios (e.g., multilingual translation process). Akoma Ntoso also was explicitly designed to be compliant with CEN Metalex, one of the other popular legal standards, which is used in the legislation.gov.uk. In 2012, the Akoma Ntoso specifications became the main working base for the activities of the LegalDocML Technical Committee within the LegalXML member section of OASIS. The "United States Legislative Markup" (USLM) schema for the United States Code (the US codified laws), developed in 2013, and the LexML Brasil XML schema for Brazilian legislative and judiciary documents, developed before, in 2008, were both designed to be consistent with Akoma Ntoso. The United States Library of Congress created the Markup of US Legislation in Akoma Ntoso challenge in July 2013 to create representations of selected US bills using the most recent Akoma Ntoso standard within a couple months for a $5000 prize, and the Legislative XML Data Mapping challenge in September 2013 to produce a data map for US bill XML and UK bill XML to the most recent Akoma Ntoso schema within a couple months for a $10000 prize. The National Archives of UK converted all the legislation in AKN in 2014. The availability of bulk legislation "moved the UK's ranking from fourth to first, in the 2014 Global Open Data Index, for legislation". The Senate of Italian Republic provides, since July 2016, all the bills in Akoma Ntoso as bulk in open data repository. The German Federal Ministry of the Interior started the project Elektronische Gesetzgebung ("Electronic Legislation") in 2015/2016 and published Version 1.0 of the German application profile "LegalDocML.de" in March 2020. The projects aim is to digitalize the entire legislative lifecycle from drafting to publication. Germany decided to adopt a model-driven development approach to creating and providing a subschema-based application profile in order to ensure interoperability among organizationally independent actors, each with their respective IT landscapes and tools. In this initial version LegalDocML.de covers draft bills in the form of laws, regulations and general administrative directives. As part of an ongoing development process, the standard could incrementally be expanded in future stages to include all relevant document types of parliamentary, legislative and promulgation processes and tools. The High-Level Committee on Management (HLCM), part of the United Nations System Chief Executives Board for Coordination, set up a Working Group on Document Standards that approved in April 2017 to adopt Akoma Ntoso as standard for modeling its documentation. Akoma Ntoso in its version 1.0 is finally adopted as OASIS standard in the frame of LegalDocML in August 2018.

    Read more →