AI Assistant Unfiltered

AI Assistant Unfiltered — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

  • GOLOG

    GOLOG

    GOLOG is a high-level logic programming language for the specification and execution of complex actions in dynamical domains. It is based on the situation calculus. It is a first-order logical language for reasoning about action and change. GOLOG was developed at the University of Toronto. == History == The concept of situation calculus on which the GOLOG programming language is based was first proposed by John McCarthy in 1963. == Description == A GOLOG interpreter automatically maintains a direct characterization of the dynamic world being modeled, on the basis of user supplied axioms about preconditions, effects of actions and the initial state of the world. This allows the application to reason about the condition of the world and consider the impacts of different potential actions before focusing on a specific action. Golog is a logic programming language and is very different from conventional programming languages. A procedural programming language like C defines the execution of statements in advance. The programmer creates a subroutine which consists of statements, and the computer executes each statement in a linear order. In contrast, fifth-generation programming languages like Golog work with an abstract model with which the interpreter can generate the sequence of actions. The source code defines the problem and it is up to the solver to find the next action. This approach can facilitate the management of complex problems from the domain of robotics. A Golog program defines the state space in which the agent is allowed to operate. A path in the symbolic domain is found with state space search. To speed up the process, Golog programs are realized as hierarchical task networks. Apart from the original Golog language, there are some extensions available. The ConGolog language provides concurrency and interrupts. Other dialects like IndiGolog and Readylog were created for real time applications in which sensor readings are updated on the fly. == Uses == Golog has been used to model the behavior of autonomous agents. In addition to a logic-based action formalism for describing the environment and the effects of basic actions, they enable the construction of complex actions using typical programming language constructs. It is also used for applications in high level control of robots and industrial processes, virtual agents, discrete event simulation etc. It can be also used to develop Belief Desire Intention-style agent systems. == Planning and scripting == In contrast to the Planning Domain Definition Language, Golog supports planning and scripting as well. Planning means that a goal state in the world model is defined, and the solver brings a logical system into this state. Behavior scripting implements reactive procedures, which are running as a computer program. For example, suppose the idea is to authoring a story. The user defines what should be true at the end of the plot. A solver gets started and applies possible actions to the current situation until the goal state is reached. The specification of a goal state and the possible actions are realized in the logical world model. In contrast, a hardwired reactive behavior doesn't need a solver but the action sequence is provided in a scripting language. The Golog interpreter, which is written in Prolog, executes the script and this will bring the story into the goal state.

    Read more →
  • Self-management (computer science)

    Self-management (computer science)

    Self-management is the process by which computer systems manage their own operation without human intervention. Self-management technologies are expected to pervade the next generation of network management systems. The growing complexity of modern networked computer systems is a limiting factor in their expansion. The increasing heterogeneity of corporate computer systems, the inclusion of mobile computing devices, and the combination of different networking technologies like WLAN, cellular phone networks, and mobile ad hoc networks make the conventional, manual management difficult, time-consuming, and error-prone. More recently, self-management has been suggested as a solution to increasing complexity in cloud computing. An industrial initiative towards realizing self-management is the Autonomic Computing Initiative (ACI) started by IBM in 2001. The ACI defines the following four functional areas: Self-configuration Auto-configuration of components Self-healing Automatic discovery, and correction of faults; automatically applying all necessary actions to bring system back to normal operation Self-optimization Automatic monitoring and control of resources to ensure the optimal functioning with respect to the defined requirements Self-protection Proactive identification and protection from arbitrary attacks

    Read more →
  • Behavior informatics

    Behavior informatics

    Behavior informatics (BI) is the informatics of behaviors so as to obtain behavior intelligence and behavior insights. BI is a research method combining science and technology, specifically in the area of engineering. The purpose of BI includes analysis of current behaviors as well as the inference of future possible behaviors. This occurs through pattern recognition. Different from applied behavior analysis from the psychological perspective, BI builds computational theories, systems and tools to qualitatively and quantitatively model, represent, analyze, and manage behaviors of individuals, groups and/or organizations. BI is built on classic study of behavioral science, including behavior modeling, applied behavior analysis, behavior analysis, behavioral economics, and organizational behavior. Typical BI tasks consist of individual and group behavior formation, representation, computational modeling, analysis, learning, simulation, and understanding of behavior impact, utility, non-occurring behaviors, etc. for behavior intervention and management. The Behavior Informatics approach to data utilizes cognitive as well as behavioral data. By combining the data, BI has the potential to effectively illustrate the big picture when it comes to behavioral decisions and patterns. One of the goals of BI is also to be able to study human behavior while eliminating issues like self-report bias. This creates more reliable and valid information for research studies. == Behavior == From an Informatics perspective, a behavior consists of three key elements: actors (behavioral subjects and objects), operations (actions, activities) and interactions (relationships), and their properties. A behavior can be represented as a behavior vector, all behaviors of an actor or an actor group can be represented as behavior sequences and multi-dimensional behavior matrix. The following table explains some of the elements of behavior. Behavior Informatics takes into account behavior when analyzing business patterns and intelligence. The inclusion of behavior in these analyses provides prominent information on social and driving factors of patterns. == Applications == Behavior Informatics is being used in a variety of settings, including but not limited to health care management, telecommunications, marketing, and security. Behavior Informatics provides a manner in which to analyze and organize the many aspects that go into a person's health care needs and decisions. When it comes to business models, behavior informatics may be utilized for a similar role. Organizations implement behavior informatics to enhance business structure and regime, where it helps moderate ideal business decisions and situations.

    Read more →
  • Labeled data

    Labeled data

    Labeled data is a group of samples that have been tagged with one or more labels. Labeling typically takes a set of unlabeled data and augments each piece of it with informative tags called judgments. For example, a data label might indicate whether a photo contains a horse or a cow, which words were uttered in an audio recording, what type of action is being performed in a video, what the topic of a news article is, what the overall sentiment of a tweet is, or whether a dot in an X-ray is a tumor. Labels can be obtained by having humans make judgments about a given piece of unlabeled data. Labeled data is significantly more expensive to obtain than the raw unlabeled data. The quality of labeled data directly influences the performance of supervised machine learning models in operation, as these models learn from the provided labels. == Crowdsourced labeled data == In 2006, Fei-Fei Li, the co-director of the Stanford Human-Centered AI Institute, initiated research to improve the artificial intelligence models and algorithms for image recognition by significantly enlarging the training data. The researchers downloaded millions of images from the World Wide Web and a team of undergraduates started to apply labels for objects to each image. In 2007, Li outsourced the data labeling work on Amazon Mechanical Turk, an online marketplace for digital piece work. The 3.2 million images that were labeled by more than 49,000 workers formed the basis for ImageNet, one of the largest hand-labeled database for outline of object recognition. == Automated data labelling == After obtaining a labeled dataset, machine learning models can be applied to the data so that new unlabeled data can be presented to the model and a likely label can be guessed or predicted for that piece of unlabeled data. == Challenges == === Data-driven bias === Algorithmic decision-making is subject to programmer-driven bias as well as data-driven bias. Training data that relies on bias labeled data will result in prejudices and omissions in a predictive model, despite the machine learning algorithm being legitimate. The labeled data used to train a specific machine learning algorithm needs to be a statistically representative sample to not bias the results. For example, in facial recognition systems underrepresented groups are subsequently often misclassified if the labeled data available to train has not been representative of the population,. In 2018, a study by Joy Buolamwini and Timnit Gebru demonstrated that two facial analysis datasets that have been used to train facial recognition algorithms, IJB-A and Adience, are composed of 79.6% and 86.2% lighter skinned humans respectively. === Human error and inconsistency === Human annotators are prone to errors and biases when labeling data. This can lead to inconsistent labels and affect the quality of the data set. The inconsistency can affect the machine learning model's ability to generalize well. === Domain expertise === Certain fields, such as legal document analysis or medical imaging, require annotators with specialized domain knowledge. Without the expertise, the annotations or labeled data may be inaccurate, negatively impacting the machine learning model's performance in a real-world scenario.

    Read more →
  • Artificial intelligence of things

    Artificial intelligence of things

    Artificial Intelligence of Things (AIoT) is the combination of artificial intelligence (AI) technologies with the Internet of things (IoT) infrastructure to create systems capable of sensing, learning, and acting on data without continuous human intervention. While IoT focuses on connectivity and sensor data collection, AI enables IoT devices to analyse data in real time and produce actionable outputs, including automated decisions at the edge. == Applications == === Manufacturing and predictive maintenance === Manufacturing accounts for the largest share of AIoT adoption by industry vertical. A common application is predictive maintenance, where sensors measuring vibration, temperature, current draw, and acoustic emissions feed machine learning models trained to detect signatures that precede equipment failure. These systems can flag developing faults weeks or months in advance, and in more advanced deployments can autonomously adjust machine parameters such as motor speed or cooling cycles to delay or prevent failure. === Other industries === In healthcare, AIoT enables remote patient monitoring through wearable devices that collect vital signs and apply AI models to detect anomalies or predict deterioration. In logistics, GPS and telematics sensors combined with AI models support real-time route optimisation, vehicle maintenance prediction, and fuel cost forecasting. Smart building systems use occupancy, temperature, and energy sensors with AI to dynamically adjust HVAC and lighting, reducing energy consumption. == Architecture == AIoT systems typically operate across three layers: a device layer of sensors and actuators that collect data, a connectivity layer that transmits data via protocols such as MQTT or HTTP, and a compute layer where AI models process the data either in the cloud or at the edge. The trend toward edge-based processing, where inference runs on low-cost processors near the data source rather than in a centralised cloud, has accelerated as hardware costs have fallen and applications increasingly require sub-second response times. == Market == Market sizing estimates for AIoT vary significantly depending on scope and definition. Fortune Business Insights valued the AIoT market at USD 35.65 billion in 2023, projecting growth to USD 253.86 billion by 2030 at a compound annual growth rate of 32.4%. Grand View Research estimated the broader market at USD 171.4 billion in 2024 with a CAGR of 31.7% through 2030, reflecting a wider definition that includes AI-integrated hardware components. North America accounted for approximately 40% of global market share in 2024, with the Asia-Pacific region projected as the fastest-growing market.

    Read more →
  • Quantum artificial life

    Quantum artificial life

    Quantum artificial life is the application of quantum algorithms with the ability to simulate biological behavior. Quantum computers offer many potential improvements to processes performed on classical computers, including machine learning and artificial intelligence. Artificial intelligence applications are often inspired by the idea of mimicking human brains through closely related biomimicry. This has been implemented to a certain extent on classical computers (using neural networks), but quantum computers offer many advantages in the simulation of artificial life. Artificial life and artificial intelligence are extremely similar, with minor differences; the goal of studying artificial life is to understand living beings better, while the goal of artificial intelligence is to create intelligent beings. In 2016, Alvarez-Rodriguez et al. developed a proposal for a quantum artificial life algorithm with the ability to simulate life and Darwinian evolution. In 2018, the same research team led by Alvarez-Rodriguez performed the proposed algorithm on the IBM ibmqx4 quantum computer, and received optimistic results. The results accurately simulated a system with the ability to undergo self-replication at the quantum scale. == Artificial life on quantum computers == The growing advancement of quantum computers has led researchers to develop quantum algorithms for simulating life processes. Researchers have designed a quantum algorithm that can accurately simulate Darwinian Evolution. Since the complete simulation of artificial life on quantum computers has only been actualized by one group, this section shall focus on the implementation by Alvarez-Rodriguez, Sanz, Lomata, and Solano on an IBM quantum computer. Individuals were realized as two qubits, one representing the genotype of the individual and the other representing the phenotype. The genotype is copied to transmit genetic information through generations, and the phenotype is dependent on the genetic information as well as the individual's interactions with their environment. In order to set up the system, the state of the genotype is instantiated by some rotation of an ancillary state ( | 0 ⟩ ⟨ 0 | {\displaystyle |0\rangle \langle 0|} ). The environment is a two-dimensional spatial grid occupied by individuals and ancillary states. The environment is divided into cells that are able to possess one or more individuals. Individuals move throughout the grid and occupy cells randomly; when two or more individuals occupy the same cell they interact with each other. === Self replication === The ability to self-replicate is critical for simulating life. Self-replication occurs when the genotype of an individual interacts with an ancillary state, creating a genotype for a new individual; this genotype interacts with a different ancillary state in order to create the phenotype. During this interaction, one would like to copy some information about the initial state into the ancillary state, but by the no cloning theorem, it is impossible to copy an arbitrary unknown quantum state. However, physicists have derived different methods for quantum cloning which does not require the exact copying of an unknown state. The method that has been implemented by Alvarez-Rodriguez et al. is one that involves the cloning of the expectation value of some observable. For a unitary U {\displaystyle U} which copies the expectation value of some set of observables X {\displaystyle {\mathsf {X}}} of state ρ {\displaystyle \rho } into a blank state ρ e {\displaystyle \rho _{e}} , the cloning machine is defined by any ( U , ρ e , X ) {\displaystyle (U,\rho _{e},{\mathsf {X}})} that fulfill the following: ∀ ρ ∀ X ∈ X {\displaystyle \forall \rho \forall X\in {\mathsf {X}}} X ¯ = X 1 ¯ = X 2 ¯ {\displaystyle {\bar {X}}={\bar {X_{1}}}={\bar {X_{2}}}} Where X ¯ {\displaystyle {\bar {X}}} is the mean value of the observable in ρ {\displaystyle \rho } before cloning, X 1 ¯ {\displaystyle {\bar {X_{1}}}} is the mean value of the observable in ρ {\displaystyle \rho } after cloning, and X 2 ¯ {\displaystyle {\bar {X_{2}}}} is the mean value of the observable in ρ e {\displaystyle \rho _{e}} after cloning. Note that the cloning machine has no dependence on ρ {\displaystyle \rho } because we want to be able to clone the expectation of the observables for any initial state. It is important to note that cloning the mean value of the observable transmits more information than is allowed classically. The calculation of the mean value is defined naturally as: X ¯ = T r [ ρ X ] {\displaystyle {\bar {X}}=Tr[\rho X]} , X 1 ¯ = T r [ R X ⊗ I ] {\displaystyle {\bar {X_{1}}}=Tr[RX\otimes I]} , X 2 ¯ = T r [ R I ⊗ X ] {\displaystyle {\bar {X_{2}}}=Tr[RI\otimes X]} where R = U ρ ⊗ ρ e U † {\displaystyle R=U\rho \otimes \rho _{e}U^{\dagger }} The simplest cloning machine clones the expectation value of σ z {\displaystyle \sigma _{z}} in arbitrary state ρ = | ψ ⟩ ⟨ ψ | {\displaystyle \rho =|\psi \rangle \langle \psi |} to ρ e = | 0 ⟩ ⟨ 0 | {\displaystyle \rho _{e}=|0\rangle \langle 0|} using U = C N O T {\displaystyle U=CNOT} . This is the cloning machine implemented for self-replication by Alvarez-Rodriguez et al. The self-replication process clearly only requires interactions between two qubits, and therefore this cloning machine is the only one necessary for self replication. === Interactions === Interactions occur between individuals when the two take up the same space on the environmental grid. The presence of interactions between individuals provides an advantage for shorter-lifespan individuals. When two individuals interact, exchanges of information between the two phenotypes may or may not occur based on their existing values. When both individual's control qubits (genotypes) are alike, no information will be exchanged. When the control qubits differ, the target qubits (phenotype) will be exchanged between the two individuals. This procedure produces a constantly changing predator-prey dynamic in the simulation. Therefore, long-living qubits, with a larger genetic makeup in the simulation, are at a disadvantage. Since information is only exchanged when interacting with an individual of different genetic makeup, the short-lived population has the advantage. === Mutation === Mutations exist in the artificial world with limited probability, equivalent to their occurrence in the real world. There are two ways in which the individual can mutate: through random single qubit rotations and by errors in the self-replication process. There are two different operators that act on the individual and cause mutations. The M operation causes a spontaneous mutation within the individual by rotating a single qubit by parameter θ. The parameter θ is random for each mutation, which creates biodiversity within the artificial environment. The M operation is a unitary matrix which can be described as: M = ( cos ⁡ ( θ ) s i n ( θ ) s i n ( θ ) − c o s ( θ ) ) {\displaystyle M={\begin{pmatrix}\cos(\theta )&sin(\theta )\\sin(\theta )&-cos(\theta )\end{pmatrix}}} The other possible way for mutations to occur is due to errors in the replication process. Due to the no-cloning theorem, it is impossible to produce perfect copies of systems that are originally in unknown quantum states. However, quantum cloning machines make it possible to create imperfect copies of quantum states, in other words, the process introduces some degree of error. The error that exists in current quantum cloning machines is the root cause for the second kind of mutations in the artificial life experiment. The imperfect cloning operation can be seen as: U M ( θ ) = I 4 + 1 2 ( 0 0 0 1 ) ⊗ ( − 1 1 1 − 1 ) ( c o s θ + i s i n θ + 1 ) {\displaystyle U_{M}(\theta )=\mathrm {I} _{4}+{\frac {1}{2}}{\begin{pmatrix}0&0\\0&1\end{pmatrix}}\otimes {\begin{pmatrix}-1&1\\1&-1\end{pmatrix}}(cos\theta +isin\theta +1)} The two kinds of mutations affect the individual differently. While the spontaneous M operation does not affect the phenotype of the individual, the self-replicating error mutation, UM, alters both the genotype of the individual, and its associated lifetime. The presence of mutations in the quantum artificial life experiment is critical for providing randomness and biodiversity. The inclusion of mutations helps to increase the accuracy of the quantum algorithm. === Death === At the instant the individual is created (when the genotype is copied into the phenotype), the phenotype interacts with the environment. As time evolves, the interaction of the individual with the environment simulates aging which eventually leads to the death of the individual. The death of an individual occurs when the expectation value of σ z {\displaystyle \sigma _{z}} is within some ϵ {\displaystyle \epsilon } of 1 in the phenotype, or, equivalently, when ρ p = | 0 ⟩ ⟨ 0 | {\displaystyle \rho _{p}=|0\rangle \langle 0|} The Lindbladian describes the interaction of the individual with the environment: ρ

    Read more →
  • AZFinText

    AZFinText

    Arizona Financial Text System (AZFinText) is a textual-based quantitative financial prediction system written by Robert P. Schumaker of University of Texas at Tyler and Hsinchun Chen of the University of Arizona. == System == This system differs from other systems in that it uses financial text as one of its key means of predicting stock price movement. This reduces the information lag-time problem evident in many similar systems where new information must be transcribed (e.g., such as losing a costly court battle or having a product recall), before the quant can react appropriately. AZFinText overcomes these limitations by utilizing the terms used in financial news articles to predict future stock prices twenty minutes after the news article has been released. It is believed that certain article terms can move stocks more than others. Terms such as factory exploded or workers strike will have a depressing effect on stock prices whereas terms such as earnings rose will tend to increase stock prices. The AZFinText system analyzes financial news to identify the patterns in how investors react to such specific information. It uses methods like sentiment analysis and term weighting to examine the text of news articles. This system is designed to find price differences that occur when the market responds to news stories. This approach provides an alternative and easier method for predicting stock market movements. == Overview of research == The foundation of AZFinText can be found in the ACM TOIS article. Within this paper, the authors tested several different prediction models and linguistic textual representations. From this work, it was found that using the article terms and the price of the stock at the time the article was released was the most effective model and using proper nouns was the most effective textual representation technique. Combining the two, AZFinText netted a 2.84% trading return over the five-week study period. AZFinText was then extended to study what combination of peer organizations help to best train the system. Using the premise that IBM has more in common with Microsoft than GM, AZFinText studied the effect of varying peer-based training sets. To do this, AZFinText trained on the various levels of GICS and evaluated the results. It was found that sector-based training was most effective, netting an 8.50% trading return, outperforming Jim Cramer, Jim Jubak and DayTraders.com during the study period. AZFinText was also compared against the top 10 quantitative systems and outperformed 6 of them. A third study investigated the role of portfolio building in a textual financial prediction system. From this study, Momentum and Contrarian stock portfolios were created and tested. Using the premise that past winning stocks will continue to win and past losing stocks will continue to lose, AZFinText netted a 20.79% return during the study period. It was also noted that traders were generally overreacting to news events, creating the opportunity of abnormal returns. A fourth study looked into using author sentiment as an added predictive variable. Using the premise that an author can unwittingly influence market trades simply by the terms they use, AZFinText was tested using tone and polarity features. It was found that Contrarian activity was occurring within the market, where articles of a positive tone would decrease in price and articles of a negative tone would increase in price. A further study investigated what article verbs have the most influence on stock price movement. From this work, it was found that planted, announcing, front, smaller and crude had the highest positive impact on stock price. == Notable publicity == AZFinText has been the topic of discussion by numerous media outlets. Some of the more notable ones include The Wall Street Journal, MIT's Technology Review, Dow Jones Newswire, WBIR in Knoxville, TN, Slashdot and other media outlets.

    Read more →
  • Statistical learning theory

    Statistical learning theory

    Statistical learning theory is a framework for machine learning drawing from the fields of statistics and functional analysis. Statistical learning theory deals with the statistical inference problem of finding a predictive function based on data. Statistical learning theory has led to successful applications in fields such as computer vision, speech recognition, and bioinformatics. == Introduction == The goals of learning are understanding and prediction. Learning falls into many categories, including supervised learning, unsupervised learning, online learning, and reinforcement learning. From the perspective of statistical learning theory, supervised learning is best understood. Supervised learning involves learning from a training set of data. Every point in the training is an input–output pair, where the input maps to an output. The learning problem consists of inferring the function that maps between the input and the output, such that the learned function can be used to predict the output from future input. Depending on the type of output, supervised learning problems are either problems of regression or problems of classification. If the output takes a continuous range of values, it is a regression problem. Using Ohm's law as an example, a regression could be performed with voltage as input and current as an output. The regression would find the functional relationship between voltage and current to be R {\displaystyle R} , such that V = I R {\displaystyle V=IR} Classification problems are those for which the output will be an element from a discrete set of labels. Classification is very common for machine learning applications. In facial recognition, for instance, a picture of a person's face would be the input, and the output label would be that person's name. The input would be represented by a large multidimensional vector whose elements represent pixels in the picture. After learning a function based on the training set data, that function is validated on a test set of data, data that did not appear in the training set. == Formal description == Take X {\displaystyle X} to be the vector space of all possible inputs, and Y {\displaystyle Y} to be the vector space of all possible outputs. Statistical learning theory takes the perspective that there is some unknown probability distribution over the product space Z = X × Y {\displaystyle Z=X\times Y} , i.e. there exists some unknown p ( z ) = p ( x , y ) {\displaystyle p(z)=p(\mathbf {x} ,y)} . The training set is made up of n {\displaystyle n} samples from this probability distribution, and is notated S = { ( x 1 , y 1 ) , … , ( x n , y n ) } = { z 1 , … , z n } {\displaystyle S=\{(\mathbf {x} _{1},y_{1}),\dots ,(\mathbf {x} _{n},y_{n})\}=\{\mathbf {z} _{1},\dots ,\mathbf {z} _{n}\}} Every x i {\displaystyle \mathbf {x} _{i}} is an input vector from the training data, and y i {\displaystyle y_{i}} is the output that corresponds to it. In this formalism, the inference problem consists of finding a function f : X → Y {\displaystyle f:X\to Y} such that f ( x ) ∼ y {\displaystyle f(\mathbf {x} )\sim y} . Let H {\displaystyle {\mathcal {H}}} be a space of functions f : X → Y {\displaystyle f:X\to Y} called the hypothesis space. The hypothesis space is the space of functions the algorithm will search through. Let V ( f ( x ) , y ) {\displaystyle V(f(\mathbf {x} ),y)} be the loss function, a metric for the difference between the predicted value f ( x ) {\displaystyle f(\mathbf {x} )} and the actual value y {\displaystyle y} . The expected risk is defined to be I [ f ] = ∫ X × Y V ( f ( x ) , y ) p ( x , y ) d x d y {\displaystyle I[f]=\int _{X\times Y}V(f(\mathbf {x} ),y)\,p(\mathbf {x} ,y)\,d\mathbf {x} \,dy} The target function, the best possible function f {\displaystyle f} that can be chosen, is given by the f {\displaystyle f} that satisfies f = argmin h ∈ H ⁡ I [ h ] {\displaystyle f=\mathop {\operatorname {argmin} } _{h\in {\mathcal {H}}}I[h]} Because the probability distribution p ( x , y ) {\displaystyle p(\mathbf {x} ,y)} is unknown, a proxy measure for the expected risk must be used. This measure is based on the training set, a sample from this unknown probability distribution. It is called the empirical risk I S [ f ] = 1 n ∑ i = 1 n V ( f ( x i ) , y i ) {\displaystyle I_{S}[f]={\frac {1}{n}}\sum _{i=1}^{n}V(f(\mathbf {x} _{i}),y_{i})} A learning algorithm that chooses the function f S {\displaystyle f_{S}} that minimizes the empirical risk is called empirical risk minimization. == Loss functions == The choice of loss function is a determining factor on the function f S {\displaystyle f_{S}} that will be chosen by the learning algorithm. The loss function also affects the convergence rate for an algorithm. It is important for the loss function to be convex. Different loss functions are used depending on whether the problem is one of regression or one of classification. === Regression === The most common loss function for regression is the square loss function (also known as the L2-norm). This familiar loss function is used in Ordinary Least Squares regression. The form is: V ( f ( x ) , y ) = ( y − f ( x ) ) 2 {\displaystyle V(f(\mathbf {x} ),y)=(y-f(\mathbf {x} ))^{2}} The absolute value loss (also known as the L1-norm) is also sometimes used: V ( f ( x ) , y ) = | y − f ( x ) | {\displaystyle V(f(\mathbf {x} ),y)=|y-f(\mathbf {x} )|} === Classification === In some sense the 0-1 indicator function is the most natural loss function for classification. It takes the value 0 if the predicted output is the same as the actual output, and it takes the value 1 if the predicted output is different from the actual output. For binary classification with Y = { − 1 , 1 } {\displaystyle Y=\{-1,1\}} , this is: V ( f ( x ) , y ) = θ ( − y f ( x ) ) {\displaystyle V(f(\mathbf {x} ),y)=\theta (-yf(\mathbf {x} ))} where θ {\displaystyle \theta } is the Heaviside step function. == Regularization == In machine learning problems, a major problem that arises is that of overfitting. Because learning is a prediction problem, the goal is not to find a function that most closely fits the (previously observed) data, but to find one that will most accurately predict output from future input. Empirical risk minimization runs this risk of overfitting: finding a function that matches the data exactly but does not predict future output well. Overfitting is symptomatic of unstable solutions; a small perturbation in the training set data would cause a large variation in the learned function. It can be shown that if the stability for the solution can be guaranteed, generalization and consistency are guaranteed as well. Regularization can solve the overfitting problem and give the problem stability. Regularization can be accomplished by restricting the hypothesis space H {\displaystyle {\mathcal {H}}} . A common example would be restricting H {\displaystyle {\mathcal {H}}} to linear functions: this can be seen as a reduction to the standard problem of linear regression. H {\displaystyle {\mathcal {H}}} could also be restricted to polynomial of degree p {\displaystyle p} , exponentials, or bounded functions on L1. Restriction of the hypothesis space avoids overfitting because the form of the potential functions are limited, and so does not allow for the choice of a function that gives empirical risk arbitrarily close to zero. One example of regularization is Tikhonov regularization. This consists of minimizing 1 n ∑ i = 1 n V ( f ( x i ) , y i ) + γ ‖ f ‖ H 2 {\displaystyle {\frac {1}{n}}\sum _{i=1}^{n}V(f(\mathbf {x} _{i}),y_{i})+\gamma \left\|f\right\|_{\mathcal {H}}^{2}} where γ {\displaystyle \gamma } is a fixed and positive parameter, the regularization parameter. Tikhonov regularization ensures existence, uniqueness, and stability of the solution. == Bounding empirical risk == Consider a binary classifier f : X → { 0 , 1 } {\displaystyle f:{\mathcal {X}}\to \{0,1\}} . We can apply Hoeffding's inequality to bound the probability that the empirical risk deviates from the true risk to be a Sub-Gaussian distribution. P ( | R ^ ( f ) − R ( f ) | ≥ ϵ ) ≤ 2 e − 2 n ϵ 2 {\displaystyle \mathbb {P} (|{\hat {R}}(f)-R(f)|\geq \epsilon )\leq 2e^{-2n\epsilon ^{2}}} But generally, when we do empirical risk minimization, we are not given a classifier; we must choose it. Therefore, a more useful result is to bound the probability of the supremum of the difference over the whole class. P ( sup f ∈ F | R ^ ( f ) − R ( f ) | ≥ ϵ ) ≤ 2 S ( F , n ) e − n ϵ 2 / 8 ≈ n d e − n ϵ 2 / 8 {\displaystyle \mathbb {P} {\bigg (}\sup _{f\in {\mathcal {F}}}|{\hat {R}}(f)-R(f)|\geq \epsilon {\bigg )}\leq 2S({\mathcal {F}},n)e^{-n\epsilon ^{2}/8}\approx n^{d}e^{-n\epsilon ^{2}/8}} where S ( F , n ) {\displaystyle S({\mathcal {F}},n)} is the shattering number and n {\displaystyle n} is the number of samples in your dataset. The exponential term comes from Hoeffding but there is an extra cost of taking the supremum over the whole cla

    Read more →
  • Pattern theory

    Pattern theory

    Pattern theory, formulated by Ulf Grenander, is a mathematical formalism to describe knowledge of the world as patterns. It differs from other approaches to artificial intelligence in that it does not begin by prescribing algorithms and machinery to recognize and classify patterns; rather, it prescribes a vocabulary to articulate and recast the pattern concepts in precise language. Broad in its mathematical coverage, Pattern Theory spans algebra and statistics, as well as local topological and global entropic properties. In addition to the new algebraic vocabulary, its statistical approach is novel in its aim to: Identify the hidden variables of a data set using real world data rather than artificial stimuli, which was previously commonplace. Formulate prior distributions for hidden variables and models for the observed variables that form the vertices of a Gibbs-like graph. Study the randomness and variability of these graphs. Create the basic classes of stochastic models applied by listing the deformations of the patterns. Synthesize (sample) from the models, not just analyze signals with them. The Brown University Pattern Theory Group was formed in 1972 by Ulf Grenander. Many mathematicians are currently working in this group, noteworthy among them being the Fields Medalist David Mumford. Mumford regards Grenander as his "guru" in Pattern Theory.

    Read more →
  • Behavior informatics

    Behavior informatics

    Behavior informatics (BI) is the informatics of behaviors so as to obtain behavior intelligence and behavior insights. BI is a research method combining science and technology, specifically in the area of engineering. The purpose of BI includes analysis of current behaviors as well as the inference of future possible behaviors. This occurs through pattern recognition. Different from applied behavior analysis from the psychological perspective, BI builds computational theories, systems and tools to qualitatively and quantitatively model, represent, analyze, and manage behaviors of individuals, groups and/or organizations. BI is built on classic study of behavioral science, including behavior modeling, applied behavior analysis, behavior analysis, behavioral economics, and organizational behavior. Typical BI tasks consist of individual and group behavior formation, representation, computational modeling, analysis, learning, simulation, and understanding of behavior impact, utility, non-occurring behaviors, etc. for behavior intervention and management. The Behavior Informatics approach to data utilizes cognitive as well as behavioral data. By combining the data, BI has the potential to effectively illustrate the big picture when it comes to behavioral decisions and patterns. One of the goals of BI is also to be able to study human behavior while eliminating issues like self-report bias. This creates more reliable and valid information for research studies. == Behavior == From an Informatics perspective, a behavior consists of three key elements: actors (behavioral subjects and objects), operations (actions, activities) and interactions (relationships), and their properties. A behavior can be represented as a behavior vector, all behaviors of an actor or an actor group can be represented as behavior sequences and multi-dimensional behavior matrix. The following table explains some of the elements of behavior. Behavior Informatics takes into account behavior when analyzing business patterns and intelligence. The inclusion of behavior in these analyses provides prominent information on social and driving factors of patterns. == Applications == Behavior Informatics is being used in a variety of settings, including but not limited to health care management, telecommunications, marketing, and security. Behavior Informatics provides a manner in which to analyze and organize the many aspects that go into a person's health care needs and decisions. When it comes to business models, behavior informatics may be utilized for a similar role. Organizations implement behavior informatics to enhance business structure and regime, where it helps moderate ideal business decisions and situations.

    Read more →
  • A Logical Calculus of the Ideas Immanent in Nervous Activity

    A Logical Calculus of the Ideas Immanent in Nervous Activity

    "A Logical Calculus of the Ideas Immanent in Nervous Activity" is a 1943 paper written by Warren Sturgis McCulloch and Walter Pitts, published in the journal The Bulletin of Mathematical Biophysics. The paper proposed a mathematical model of the nervous system as a network of simple logical elements, later known as artificial neurons, or McCulloch–Pitts neurons. These neurons receive inputs, perform a weighted sum, and fire an output signal based on a threshold function. By connecting these units in various configurations, McCulloch and Pitts demonstrated that their model could perform all logical functions. It is a seminal work in cognitive science, computational neuroscience, computer science, and artificial intelligence. It was a foundational result in automata theory. John von Neumann cited it as a significant result. == Mathematics == The artificial neuron used in the original paper is slightly different from the modern version. They considered neural networks that operate in discrete steps of time t = 0 , 1 , … {\displaystyle t=0,1,\dots } . The neural network contains a number of neurons. Let the state of a neuron i {\displaystyle i} at time t {\displaystyle t} be N i ( t ) {\displaystyle N_{i}(t)} . The state of a neuron can either be 0 or 1, standing for "not firing" and "firing". Each neuron also has a firing threshold θ {\displaystyle \theta } , such that it fires if the total input exceeds the threshold. Each neuron can connect to any other neuron (including itself) with positive synapses (excitatory) or negative synapses (inhibitory). That is, each neuron can connect to another neuron with a weight w {\displaystyle w} taking an integer value. A peripheral afferent is a neuron with no incoming synapses. We can regard each neural network as a directed graph, with the nodes being the neurons, and the directed edges being the synapses. A neural network has a circle or a circuit if there exists a directed circle in the graph. Let w i j ( t ) {\displaystyle w_{ij}(t)} be the connection weight from neuron j {\displaystyle j} to neuron i {\displaystyle i} at time t {\displaystyle t} , then its next state is N i ( t + 1 ) = H ( ∑ j = 1 n w i j ( t ) N j ( t ) − θ i ( t ) ) , {\displaystyle N_{i}(t+1)=H\left(\sum _{j=1}^{n}w_{ij}(t)N_{j}(t)-\theta _{i}(t)\right),} where H {\displaystyle H} is the Heaviside step function (outputting 1 if the input is greater than or equal to 0, and 0 otherwise). === Symbolic logic === The paper used, as a logical language for describing neural networks, "Language II" from The Logical Syntax of Language by Rudolf Carnap with some notations taken from Principia Mathematica by Alfred North Whitehead and Bertrand Russell. Language II covers substantial parts of classical mathematics, including real analysis and portions of set theory. To describe a neural network with peripheral afferents N 1 , N 2 , … , N p {\displaystyle N_{1},N_{2},\dots ,N_{p}} and non-peripheral afferents N p + 1 , N p + 2 , … , N n {\displaystyle N_{p+1},N_{p+2},\dots ,N_{n}} they considered logical predicate of form P r ( N 1 , N 2 , … , N p , t ) {\displaystyle Pr(N_{1},N_{2},\dots ,N_{p},t)} where P r {\displaystyle Pr} is a first-order logic predicate function (a function that outputs a boolean), N 1 , … , N p {\displaystyle N_{1},\dots ,N_{p}} are predicates that take t {\displaystyle t} as an argument, and t {\displaystyle t} is the only free variable in the predicate. Intuitively speaking, N 1 , … , N p {\displaystyle N_{1},\dots ,N_{p}} specifies the binary input patterns going into the neural network over all time, and P r ( N 1 , N 2 , … , N n , t ) {\displaystyle Pr(N_{1},N_{2},\dots ,N_{n},t)} is a function that takes some binary input patterns, and constructs an output binary pattern P r ( N 1 , N 2 , … , N n , 0 ) , P r ( N 1 , N 2 , … , N n , 1 ) , … {\displaystyle Pr(N_{1},N_{2},\dots ,N_{n},0),Pr(N_{1},N_{2},\dots ,N_{n},1),\dots } . A logical sentence P r ( N 1 , N 2 , … , N n , t ) {\displaystyle Pr(N_{1},N_{2},\dots ,N_{n},t)} is realized by a neural network iff there exists a time-delay T ≥ 0 {\displaystyle T\geq 0} , a neuron i {\displaystyle i} in the network, and an initial state for the non-peripheral neurons N p + 1 ( 0 ) , … , N n ( 0 ) {\displaystyle N_{p+1}(0),\dots ,N_{n}(0)} , such that for any time t {\displaystyle t} , the truth-value of the logical sentence is equal to the state of the neuron i {\displaystyle i} at time t + T {\displaystyle t+T} . That is, ∀ t = 0 , 1 , 2 , … , P r ( N 1 , N 2 , … , N p , t ) = N i ( t + T ) {\displaystyle \forall t=0,1,2,\dots ,\quad Pr(N_{1},N_{2},\dots ,N_{p},t)=N_{i}(t+T)} === Equivalence === In the paper, they considered some alternative definitions of artificial neural networks, and have shown them to be equivalent, that is, neural networks under one definition realizes precisely the same logical sentences as neural networks under another definition. They considered three forms of inhibition: relative inhibition, absolute inhibition, and extinction. The definition above is relative inhibition. By "absolute inhibition" they meant that if any negative synapse fires, then the neuron will not fire. By "extinction" they meant that if at time t {\displaystyle t} , any inhibitory synapse fires on a neuron i {\displaystyle i} , then θ i ( t + j ) = θ i ( 0 ) + b j {\displaystyle \theta _{i}(t+j)=\theta _{i}(0)+b_{j}} for j = 1 , 2 , 3 , … {\displaystyle j=1,2,3,\dots } , until the next time an inhibitory synapse fires on i {\displaystyle i} . It is required that b j = 0 {\displaystyle b_{j}=0} for all large j {\displaystyle j} . Theorem 4 and 5 state that these are equivalent. They considered three forms of excitation: spatial summation, temporal summation, and facilitation. The definition above is spatial summation (which they pictured as having multiple synapses placed close together, so that the effect of their firing sums up). By "temporal summation" they meant that the total incoming signal is ∑ τ = 0 T ∑ j = 1 n w i j ( t ) N j ( t − τ ) {\displaystyle \sum _{\tau =0}^{T}\sum _{j=1}^{n}w_{ij}(t)N_{j}(t-\tau )} for some T ≥ 1 {\displaystyle T\geq 1} . By "facilitation" they meant the same as extinction, except that b j ≤ 0 {\displaystyle b_{j}\leq 0} . Theorem 6 states that these are equivalent. They considered neural networks that do not change, and those that change by Hebbian learning. That is, they assume that at t = 0 {\displaystyle t=0} , some excitatory synaptic connections are not active. If at any t {\displaystyle t} , both N i ( t ) = 1 , N j ( t ) = 1 {\displaystyle N_{i}(t)=1,N_{j}(t)=1} , then any latent excitatory synapse between i , j {\displaystyle i,j} becomes active. Theorem 7 states that these are equivalent. === Logical expressivity === They considered "temporal propositional expressions" (TPE), which are propositional formulas with one free variable t {\displaystyle t} . For example, N 1 ( t ) ∨ N 2 ( t ) ∧ ¬ N 3 ( t ) {\displaystyle N_{1}(t)\vee N_{2}(t)\wedge \neg N_{3}(t)} is such an expression. Theorem 1 and 2 together showed that neural nets without circles are equivalent to TPE. For neural nets with loops, they noted that "realizable P r {\displaystyle Pr} may involve reference to past events of an indefinite degree of remoteness". These then encodes for sentences like "There was some x such that x was a ψ" or ( ∃ x ) ( ψ x ) {\displaystyle (\exists x)(\psi x)} . Theorems 8 to 10 showed that neural nets with loops can encode all first-order logic with equality and conversely, any looped neural networks is equivalent to a sentence in first-order logic with equality, thus showing that they are equivalent in logical expressiveness. As a remark, they noted that a neural network, if furnished with a tape, scanners, and write-heads, is equivalent to a Turing machine, and conversely, every Turing machine is equivalent to some such neural network. Thus, these neural networks are equivalent to Turing computability and Church's lambda-definability. == Context == === Previous work === The paper built upon several previous strands of work. In the symbolic logic side, it built on the previous work by Carnap, Whitehead, and Russell. This was contributed by Walter Pitts, who had a strong proficiency with symbolic logic. Pitts provided mathematical and logical rigor to McCulloch’s vague ideas on psychons (atoms of psychological events) and circular causality. In the neuroscience side, it built on previous work by the mathematical biology research group centered around Nicolas Rashevsky, of which McCulloch was a member. The paper was published in the Bulletin of Mathematical Biophysics, which was founded by Rashevsky in 1939. During the late 1930s, Rashevsky's research group was producing papers that had difficulty publishing in other journals at the time, so Rashevsky decided to found a new journal exclusively devoted to mathematical biophysics. Also in the Rashevsky's group was Alston Scott Householder, who in 1941 published an abstract model

    Read more →
  • Computational intelligence

    Computational intelligence

    In computer science, computational intelligence (CI) refers to concepts, paradigms, algorithms and implementations of systems that are designed to show "intelligent" behavior in complex and changing environments. These systems are aimed at mastering complex tasks in a wide variety of technical or commercial areas and offer solutions that recognize and interpret patterns, control processes, support decision-making or autonomously manoeuvre vehicles or robots in unknown environments, among other things. These concepts and paradigms are characterized by the ability to learn or adapt to new situations, to generalize, to abstract, to discover and associate. Nature-analog or nature-inspired methods play a key role in this. CI approaches primarily address those complex real-world problems for which traditional or mathematical modeling is not appropriate for various reasons: the processes cannot be described exactly with complete knowledge, the processes are too complex for mathematical reasoning, they contain some uncertainties during the process, such as unforeseen changes in the environment or in the process itself, or the processes are simply stochastic in nature. Thus, CI techniques are properly aimed at processes that are ill-defined, complex, nonlinear, time-varying and/or stochastic. A recent definition of the IEEE Computational Intelligence Societey describes CI as the theory, design, application and development of biologically and linguistically motivated computational paradigms. Traditionally the three main pillars of CI have been Neural Networks, Fuzzy Systems and Evolutionary Computation. ... CI is an evolving field and at present in addition to the three main constituents, it encompasses computing paradigms like ambient intelligence, artificial life, cultural learning, artificial endocrine networks, social reasoning, and artificial hormone networks. ... Over the last few years there has been an explosion of research on Deep Learning, in particular deep convolutional neural networks. Nowadays, deep learning has become the core method for artificial intelligence. In fact, some of the most successful AI systems are based on CI. However, as CI is an emerging and developing field there is no final definition of CI, especially in terms of the list of concepts and paradigms that belong to it. The general requirements for the development of an “intelligent system” are ultimately always the same, namely the simulation of intelligent thinking and action in a specific area of application. To do this, the knowledge about this area must be represented in a model so that it can be processed. The quality of the resulting system depends largely on how well the model was chosen in the development process. Sometimes data-driven methods are suitable for finding a good model and sometimes logic-based knowledge representations deliver better results. Hybrid models are usually used in real applications. According to actual textbooks, the following methods and paradigms, which largely complement each other, can be regarded as parts of CI: Fuzzy systems Neural networks and, in particular, convolutional neural networks Evolutionary computation and, in particular, multi-objective evolutionary optimization Swarm intelligence Bayesian networks Artificial immune systems Learning theory Probabilistic methods == Relationship between hard and soft computing and artificial and computational intelligence == Artificial intelligence (AI) is used in the media, but also by some of the scientists involved, as a kind of umbrella term for the various techniques associated with it or with CI. Craenen and Eiben state that attempts to define or at least describe CI can usually be assigned to one or more of the following groups: "Relative definition” comparing CI to AI Conceptual treatment of key notions and their roles in CI Listing of the (established) areas that belong to it The relationship between CI and AI has been a frequently discussed topic during the development of CI. While the above list implies that they are synonyms, the vast majority of AI/CI researchers working on the subject consider them to be distinct fields, where either CI is an alternative to AI AI includes CI CI includes AI The view of the first of the above three points goes back to Zadeh, the founder of the fuzzy set theory, who differentiated machine intelligence into hard and soft computing techniques, which are used in artificial intelligence on the one hand and computational intelligence on the other. In hard computing (HC) and traditional AI (e.g. expert systems), inaccuracy and uncertainty are undesirable characteristics of a system, while soft computing (SC) and thus CI focus on dealing with these characteristics. The adjacent figure illustrates this view and lists the most important CI techniques. Another frequently mentioned distinguishing feature is the representation of information in symbolic form in AI and in sub-symbolic form in CI techniques. Hard computing is a conventional computing method based on the principles of certainty and accuracy and it is deterministic. It requires a precisely stated analytical model of the task to be processed and a prewritten program, i.e. a fixed set of instructions. The models used are based on Boolean logic (also called crisp logic), where e.g. an element can be either a member of a set or not and there is nothing in between. When applied to real-world tasks, systems based on HC result in specific control actions defined by a mathematical model or algorithm. If an unforeseen situation occurs that is not included in the model or algorithm used, the action will most likely fail. Soft computing, on the other hand, is based on the fact that the human mind is capable of storing information and processing it in a goal-oriented way, even if it is imprecise and lacks certainty. SC is based on the model of the human brain with probabilistic thinking, fuzzy logic and multi-valued logic. Soft computing can process a wealth of data and perform a large number of computations, which may not be exact, in parallel. For hard problems for which no satisfying exact solutions based on HC are available, SC methods can be applied successfully. SC methods are usually stochastic in nature i.e., they are a randomly defined processes that can be analyzed statistically but not with precision. Up to now, the results of some CI methods, such as deep learning, cannot be verified and it is also not clear what they are based on. This problem represents an important scientific issue for the future. AI and CI are catchy terms, but they are also so similar that they can be confused. The meaning of both terms has developed and changed over a long period of time, with AI being used first. Bezdek describes this impressively and concludes that such buzzwords are frequently used and hyped by the scientific community, science management and (science) journalism. Not least because AI and biological intelligence are emotionally charged terms and it is still difficult to find a generally accepted definition for the basic term intelligence. == History == In 1950, Alan Turing, one of the founding fathers of computer science, developed a test for computer intelligence known as the Turing test. In this test, a person can ask questions via a keyboard and a monitor without knowing whether his counterpart is a human or a computer. A computer is considered intelligent if the interrogator cannot distinguish the computer from a human. This illustrates the discussion about intelligent computers at the beginning of the computer age. The term Computational Intelligence was first used as the title of the journal of the same name in 1985 and later by the IEEE Neural Networks Council (NNC), which was founded 1989 by a group of researchers interested in the development of biological and artificial neural networks. On November 21, 2001, the NNC became the IEEE Neural Networks Society, to become the IEEE Computational Intelligence Society two years later by including new areas of interest such as fuzzy systems and evolutionary computation. The NNC helped organize the first IEEE World Congress on Computational Intelligence in Orlando, Florida in 1994. On this conference the first clear definition of Computational Intelligence was introduced by Bezdek: A system is computationally intelligent when it: deals with only numerical (low-level) data, has pattern-recognition components, does not use knowledge in the AI sense; and additionally when it (begins to) exhibit (1) computational adaptivity; (2) computational fault tolerance; (3) speed approaching human-like turnaround and (4) error rates that approximate human performance. Today, with machine learning and deep learning in particular utilizing a breadth of supervised, unsupervised, and reinforcement learning approaches, the CI landscape has been greatly enhanced, with novell intelligent approaches. == The main algorithmic approaches of CI and their applicati

    Read more →
  • Splitwise

    Splitwise

    Splitwise is an online expense-splitting application software accessible via web browser and mobile app. The app facilitates repayments of shared bills by calculating what each person in a group owes. The primary competitor to the app is Venmo, which only operates in the U.S. Splitwise allows users to create groups with friends to determine what each person owes. All expenses and allocations are added to the app, and Splitwise simplifies the transaction history to determine exactly what payments need to be made to whom to settle outstanding balances. Splitwise stores user information via cloud storage. It was developed and is owned by Splitwise Inc., based in Providence, Rhode Island, United States. == History == The app was launched in February 2011 as SplitTheRent, intended to be used for rent splitting, by Ryan Laughlin, Jon Bittner and Marshall Weir. In September 2013, Splitwise was integrated with Venmo to allow users to settle payments via Venmo. In April 2024, Splitwise partnered with Tink, a Visa payment services company, to incorporate a bank transfer feature directly in the Splitwise app. === Financing === In December 2014, the company raised $1.4 million. In October 2016, the company raised $5 million. In April 2021, Splitwise raised $20 million in funding from series A round run by Insight Partners. == Reception == A 2022 opinion piece in The Guardian by London journalist Imogen West-Knights shared the negative effects of exactly splitting bills among friends and family members. West-Knights argued that Splitwise and similar apps can "turn people into those true enemies of all that is fun and joyful in the world: accountants." However, she said the app does work better when used by couples rather than friend groups. Other reviews noted that the app makes people petty. In contrast, an article published by Condé Nast Traveler describes how Splitwise eliminated stress caused by complicated offline bill splitting, saying it "fixed such a pervasive obstacle in group travel." Coverage by The Wall Street Journal lands somewhere in between the two contrasting views, saying Splitwise and similar apps are helpful, but users need to be prepared for difficult money-related conversations that may arise. An etiquette advisor at Debrett's, said, "The less talk you can have about money on any of these occasions, the better." An editor suggested conversations as simple as asking, "We’re splitting this evenly, right?" before a meal.

    Read more →
  • Intelligent automation

    Intelligent automation

    Intelligent automation (IA), or intelligent process automation, is a software term that refers to a combination of artificial intelligence (AI) and robotic process automation (RPA). Companies use intelligent automation to cut costs and streamline tasks by using artificial-intelligence-powered robotic software to mitigate repetitive tasks. As it accumulates data, the system learns in an effort to improve its efficiency. Intelligent automation applications consist of, but are not limited to, pattern analysis, data assembly, and classification. The term is similar to hyperautomation, a concept identified by research group Gartner as being one of the top technology trends of 2020. == Technology == Intelligent automation applies the assembly line concept of breaking tasks into repetitive steps to improve business processes. Rather than having humans perform each step, intelligent automation can replace steps with an intelligent software robot, improving efficiency. Intelligent automation integrates robotic process automation (RPA) with artificial intelligence techniques (such as machine learning, natural-language processing, and computer vision) enabling systems to interpret data, make decisions, and adapt to changing inputs. Modern platforms use a layered architecture combining workflow orchestration, low-code tools, integration middleware, and AI services to coordinate bots and data pipelines across organisational systems. == Applications == Intelligent automation is used to process unstructured content. Common real-world applications include self-driving cars, self-checkouts at grocery stores, smart home assistants, and appliances. Businesses can apply data and machine learning to build predictive analytics that react to consumer behavior changes, or to implement RPA to improve manufacturing floor operations. For example, the technology has also been used to automate the workflow behind distributing COVID-19 vaccines. Data provided by hospital systems’ electronic health records can be processed to identify and educate patients, and schedule vaccinations. Intelligent automation can provide real-time insights on profitability and efficiency. However, in an April 2022 survey by Alchemmy, despite three quarters of businesses acknowledging the importance of Artificial Intelligence to their future development, just a quarter of business leaders (25%) considered Intelligent Automation a “game changer” in understanding current performance. 42% of CTOs see “shortage of talent” as the main obstacle to implementing Intelligent Automation in their business, while 36% of CEOs see ‘upskilling and professional development of existing workforce’ as the most significant adoption barrier. IA is becoming increasingly accessible for firms of all sizes. With this in mind, it is expected to continue to grow rapidly in all industries. This technology has the potential to change the workforce. As it advances, it will be able to perform increasingly complex and difficult tasks. In addition, this may expose certain workforce issues as well as change how tasks are allocated. Tools such as Semrush's AI Visibility Toolkit and Enterprise AIO reflect these developments by analysing how entities are referenced and represented within responses produced by large-language-model-based systems. == Benefits == Streamline processes: Repetitive manual tasks can put a strain on the workforce. However, with AI agents, these tasks can be automated to allow teams to focus on more important matters that require human cognition. Intelligent automation can also be used to mitigate tasks with human error which in turn increases proficiency. This allows the opportunity for firms to scale production without the traditional negative consequences such as reduced quality or increased risk. Customer service improvement: Customer service can be significantly improved, providing the firm with a competitive advantage. IA utilizing chat features allows for instant curated responses to customers. In addition, it can give updates to customers, make appointments, manage calls, and personalize campaigns. Flexibility: Due to the wide range of applications, IA is useful across a variety of fields, technologies, projects and industries. In addition, IA can be integrated with current automated systems in place. This allows for optimized systems unique to each firm to best fit their individual needs. == Capabilities == Cognitive automation: Employs AI techniques to assist humans in decision-making and task completion Natural language processing: Allows computers to automate knowledge work Business process management: Enhances the consistency and agility of corporate operations Process mining: Applies data mining methods to discover, analyze, and improve business processes Intelligent document processing: Utilizes OCR and other advanced technologies to extract data from documents and convert it into structured, usable data Computer vision: Allows computers to extract information from digital images, videos, and other visual inputs Integration automation: Establishes a unified platform with automated workflows that integrate data, applications, and devices.

    Read more →
  • Hidden layer

    Hidden layer

    In artificial neural networks, a hidden layer is a layer of artificial neurons that is neither an input layer nor an output layer. The simplest examples appear in multilayer perceptrons (MLP), as illustrated in the diagram. An MLP without any hidden layer is essentially just a linear model. With hidden layers and activation functions, however, nonlinearity is introduced into the model. In typical machine learning practice, the weights and biases are initialized, then iteratively updated during training via backpropagation.

    Read more →