Arizona Financial Text System (AZFinText) is a textual-based quantitative financial prediction system written by Robert P. Schumaker of University of Texas at Tyler and Hsinchun Chen of the University of Arizona. == System == This system differs from other systems in that it uses financial text as one of its key means of predicting stock price movement. This reduces the information lag-time problem evident in many similar systems where new information must be transcribed (e.g., such as losing a costly court battle or having a product recall), before the quant can react appropriately. AZFinText overcomes these limitations by utilizing the terms used in financial news articles to predict future stock prices twenty minutes after the news article has been released. It is believed that certain article terms can move stocks more than others. Terms such as factory exploded or workers strike will have a depressing effect on stock prices whereas terms such as earnings rose will tend to increase stock prices. The AZFinText system analyzes financial news to identify the patterns in how investors react to such specific information. It uses methods like sentiment analysis and term weighting to examine the text of news articles. This system is designed to find price differences that occur when the market responds to news stories. This approach provides an alternative and easier method for predicting stock market movements. == Overview of research == The foundation of AZFinText can be found in the ACM TOIS article. Within this paper, the authors tested several different prediction models and linguistic textual representations. From this work, it was found that using the article terms and the price of the stock at the time the article was released was the most effective model and using proper nouns was the most effective textual representation technique. Combining the two, AZFinText netted a 2.84% trading return over the five-week study period. AZFinText was then extended to study what combination of peer organizations help to best train the system. Using the premise that IBM has more in common with Microsoft than GM, AZFinText studied the effect of varying peer-based training sets. To do this, AZFinText trained on the various levels of GICS and evaluated the results. It was found that sector-based training was most effective, netting an 8.50% trading return, outperforming Jim Cramer, Jim Jubak and DayTraders.com during the study period. AZFinText was also compared against the top 10 quantitative systems and outperformed 6 of them. A third study investigated the role of portfolio building in a textual financial prediction system. From this study, Momentum and Contrarian stock portfolios were created and tested. Using the premise that past winning stocks will continue to win and past losing stocks will continue to lose, AZFinText netted a 20.79% return during the study period. It was also noted that traders were generally overreacting to news events, creating the opportunity of abnormal returns. A fourth study looked into using author sentiment as an added predictive variable. Using the premise that an author can unwittingly influence market trades simply by the terms they use, AZFinText was tested using tone and polarity features. It was found that Contrarian activity was occurring within the market, where articles of a positive tone would decrease in price and articles of a negative tone would increase in price. A further study investigated what article verbs have the most influence on stock price movement. From this work, it was found that planted, announcing, front, smaller and crude had the highest positive impact on stock price. == Notable publicity == AZFinText has been the topic of discussion by numerous media outlets. Some of the more notable ones include The Wall Street Journal, MIT's Technology Review, Dow Jones Newswire, WBIR in Knoxville, TN, Slashdot and other media outlets.
Construction robots
Construction robots are a subset of industrial robots used for building and infrastructure construction on site, or in the production of materials and components offsite. A 2021 survey said 55% of construction companies in the United States, Europe, and China used robots in some form. This figure, however, reflects reported use across the construction value chain rather than widespread deployment of robots on active construction sites. Real-world adoption remains limited, with many robotic systems confined to pilot projects, controlled environments, or specific task applications rather than continuous on-site construction use. One of the main challenges in deploying robots on construction sites is the unstructured and variable nature of the environment, which differs fundamentally from controlled factory settings where industrial robots have traditionally operated. Some robots currently deployed on job sites assist with physically demanding or repetitive tasks: excavating, lifting heavy materials, surveying, laying out markers, tying rebar, and installing drywall. More advanced systems are being developed for exterior finishing, steel placement, masonry, and reinforced concrete work. In practice, rather than autonomous systems performing core building tasks, the most widely adopted robot applications on construction sites involve technologies such as aerial drones (or, less frequently, robot 'dogs' - for example, Boston Dynamics' Spot - or humanoid robots) used for surveying, inspection, and progress monitoring (the robots typically carry video and/or 360-degree cameras, LiDar scanners or other data capture devices, with data analysed using artificial intelligence and machine learning). Some emerging systems are designed as multifunctional construction robots, integrating multiple tools and capabilities within a single robotic platform to perform different stages of the construction process. These systems aim to improve operational flexibility and increase automation in complex construction environments. Experimental projects using robotic construction technologies and additive manufacturing have been demonstrated in several countries as part of broader efforts to industrialize the construction sector and improve productivity through automation and digitalization. == Features == Construction robots are generally required to meet the following criteria: Mobility: the ability to navigate around a construction site, including uneven terrain and confined spaces. Adaptability: the ability to handle components of variable size, weight, and shape. Environmental awareness: the ability to sense and respond to changing on-site conditions. Interactivity: the ability to operate alongside human workers and other equipment. Multitasking: the ability to perform several different operations within a single deployment. == Capabilities == Construction robots have been developed and tested for a range of on-site tasks, including: Progress monitoring — robots equipped with cameras and sensors can track construction progress and identify deviations from plans. Inspection — robots are used to investigate infrastructure at dangerous or inaccessible locations, reducing risk to human workers and eliminating human error. Wall construction — robotic systems can lay bricks and blocks with greater speed and consistency than manual labour. Earthmoving and material handling — autonomous excavators and haul trucks use GPS, lidar, and motion sensors to perform digging, trenching, and loading tasks with minimal human input. Grading and dozing — autonomous bulldozers use GPS, gyroscopes, and laser sensors to control blade angle and depth, improving surface finish accuracy and reducing material overuse. 3D printing — additive manufacturing systems can construct walls and structural elements directly from digital models. == Notable construction-related activities undertaken by robots == The distribution of robotic applications in construction varies across the project lifecycle. Most applications are concentrated in structural construction tasks such as masonry, concrete work, and assembly, while other phases, including planning, maintenance, and demolition, remain less represented. === Automated building systems === The Nisseki Yokohama Building (also known as Rail City Yokohama), a 30-storey office building in Yokohama, Japan, was constructed between 1994 and 1997 using the SMART system (Shimizu Manufacturing system by Advanced Robotics Technology), developed by Shimizu Corporation and a consortium of seven other Japanese companies. The system used automated horizontal hoists and vertical lifts to position steel beams, columns, precast concrete floor slabs, and prefabricated facade panels, with welding robots connecting structural elements under laser-guided precision. Each component was tracked by barcode to monitor progress and coordinate just-in-time delivery of materials. Obayashi Corporation developed the Advanced Building Construction System (ABCS), a similar automated platform used in several high-rise projects in Japan in the 1990s, including the NEC Head Office in Kanagawa (1997–2000). === Progress monitoring, inspection === Boston Dynamics' Spot was used in February 2024 to inspect sections of the M5 motorway in England for National Highways. A £15,000 humanoid robot (a G1 model from Chinese manufacturer Unitree) was deployed to capture 360-degree imagery and progress reports to support health and safety monitoring and reporting for UK contractor Tilbury Douglas in April 2026. In the US, Virginia Tech's ARCADE research lab is developing MARIO (Multi-Agent Robotic system for Inspection On-site), a heterogenous robotic system deploying multiple robots capable of different locomotion to perform remote real-time construction progress monitoring in complex construction sites. === Earthmoving === === Concrete works === Obayashi Corporation developed and deployed a robotic system for placing concrete layers in dam construction in Japan. A concrete floor finishing robot was deployed by Kajima and Tokimec in Japan. The MARK series were designed in 1984 to automate the levelling and trowelling of concrete slabs on construction sites, providing consistent finishing accuracy, improved efficiency, and reduced dependence on skilled labour === Masonry === SAM100 (Semi-Automated Mason), developed by Construction Robotics, is one of the first commercially available bricklaying robots for on-site masonry construction. In 2018, it was used in the construction of the University Arts Building at the University of Nevada, Reno — a $35.5 million facility — where it laid over 60,000 of the 100,000 bricks required, reducing the brick veneer installation time by approximately 50%. Hadrian X, developed by the Australian company Fastbrick Robotics, is a fully autonomous mobile bricklaying robot. In November 2022, it completed its first commercial project — five four-bedroom houses in Wellard, Western Australia. In February 2025, PulteGroup, one of the largest homebuilders in the United States, piloted Hadrian X on a site in Florida, constructing an entire house in a single day. === 3D printing === In May 2025, a residential building in Arinaga, Gran Canaria, Spain, was completed using 3D printing construction technology, as part of broader efforts to demonstrate robotic and additive manufacturing methods in the housing sector. In 2026, a three-storey apartment block in France was constructed using concrete 3D printing technology, three months faster than conventional building methods. Finland's Hyperion Robotics has opened a UK factory and used 3D printing with concrete to produce foundations for pipelines and for electricity substation bases, reducing time-consuming and weather-dependent onsite construction processes. == Social impact == The adoption of construction robots varies significantly by region and is shaped by labour market conditions, cultural attitudes, and regulatory frameworks. In Japan, construction robots have been embraced as a response to an ageing workforce and chronic labour shortages, and are generally viewed positively by the industry. In the United States, adoption has historically been slower, partly due to resistance from labour unions concerned about job displacement. Research suggests that the impact of automation on workers is uneven: while robots can create a productivity effect that benefits some workers, displacement effects are most pronounced among younger, less-educated workers in manufacturing-heavy regions. More than 60% of construction firms now report difficulty finding skilled operators, which has increased openness to automation as a practical solution to workforce shortages rather than a replacement for workers. In the UK, during onsite deployment of a humanoid robot for monitoring purposes, there were concerns that staff might think they were being watched ("It's not there to spy on people.... So, we insist that everyone is blurred out. N
Memory color effect
The memory color effect is the phenomenon that the canonical hue of a type of object acquired through experience (e.g. the sky, a leaf, or a strawberry) can directly modulate the appearance of the actual colors of objects. Human observers acquire memory colors through their experiences with instances of that type. For example, most human observers know that an apple typically has a reddish hue; this knowledge about the canonical color which is represented in memory constitutes a memory color. As an example of the effect, normal human trichromats, when presented with a gray banana, often perceive the gray banana as being yellow - the banana's memory color. In light of this, subjects typically adjust the color of the banana towards the color blue - the opponent color of yellow - when asked to adjust its surface to gray to cancel the subtle activation of banana's memory color. Subsequent empirical studies have also shown the memory color effect on man-made objects (e.g. smurfs, German mailboxes), the effect being especially pronounced for blue and yellow objects. To explain this, researchers have argued that because natural daylight shifts from short wavelengths of light (i.e., bluish hues) towards light of longer wavelengths (i.e., yellowish-orange hues) during the day, the memory colors for blue and yellow objects are recruited by the visual system to a higher degree to compensate for this fluctuation in illumination, thereby providing a stronger memory color effect. == Form identification == Memory color plays a role when detecting an object. In a study where participants were given objects, such as an apple, with two alternate forms for each, a crooked apple and a circular apple, researchers changed the colors of the alternate forms and asked if they could identify them. Most of the participants answered "unsure," suggesting that we use memory color when identifying an object. The research redefined memory color as a phenomenon when "a form's identity affects the phenomenal hue of that form." == Color effect on memorization == Memory color effect can be derived from the human instinct to memorize objects better. Comparing the effect of recognizing gray-scaled images and colored images, results showed that people were able to recall colored images 5% higher compared to gray-scaled images. An important factor was that higher level of contrast between the object and background color influences memory. In a specific study related to this, participants reported that colors were 5% to 10% easier to recognize compared to black and white. == Color constancy and memory color effect == Color constancy is the phenomenon where a surface to appear to be of the same color under a wide rage of illumination. A study tested two hypotheses with regards to color memory; the photoreceptor hypothesis and the surface reflectance hypothesis. The test color was surround either by various color patches forming a complex pattern or a uniform “grey” field at the same chromaticity as that of the illuminant. The test color was presented on a dark background for the control group. It was observed that complex surround results where in line with the surface-reflectance hypothesis and not the photoreceptor hypothesis, showing that the accuracy and precision of color memory are fundamentals to understanding the phenomenon of color constancy. == Significance to the evolution of trichromacy == While objects that possess canonical hues make up a small percentage of the objects which populate humans’ visual experience, the human visual system evolved in an environment populated with objects that possess canonical hues. This suggests that the memory color effect is related to the emergence of trichromacy because it has been argued that trichromacy evolved to optimize the ability to detect ripe fruits—objects that appear in canonical hues. == In perception research == In perception research, the memory color effect is cited as evidence for the opponent color theory, which states that four basic colors can be paired with its opponent color: red—green, blue—yellow. This explains why participants adjust the ripe banana color to a blueish tone to make its memory color yellow as gray. Researchers have also found empirical evidence that suggests memory color is recruited by the visual system to achieve color constancy. For example, participants had a lower percentage of color constancy when looking at a color incongruent scene, such as a purple banana, compared to a color diagnostical scene, a yellow banana. This suggests that color constancy is influenced by the color of objects that we are familiar with, which the memory color effect takes part.
Luma (video)
In video, luma ( Y ′ {\displaystyle Y'} ) represents the brightness in an image (the "black-and-white" or achromatic portion of the image). Luma is typically paired with chroma. Luma represents the achromatic image, while the chroma components represent the color information. Converting R′G′B′ sources (such as the output of a three-CCD camera) into luma and chroma allows for chroma subsampling: because human vision has finer spatial sensitivity to luminance ("black and white") differences than chromatic differences, video systems can store and transmit chromatic information at lower resolution, optimizing perceived detail at a particular bandwidth. == Luma versus relative luminance == Luma is the weighted sum of gamma-compressed R′G′B′ components of a color video—the prime symbols ′ denote gamma compression. The word was proposed to prevent confusion between luma as implemented in video engineering and relative luminance as used in color science (i.e. as defined by CIE). Relative luminance is formed as a weighted sum of linear RGB components, not gamma-compressed ones. Even so, luma is sometimes erroneously called luminance. SMPTE EG 28 recommends the symbol Y ′ {\displaystyle Y'} to denote luma and the symbol Y {\displaystyle Y} to denote relative luminance. === Use of relative luminance === While luma is more often encountered, relative luminance is sometimes used in video engineering when referring to the brightness of a monitor. The formula used to calculate relative luminance uses coefficients based on the CIE color matching functions and the relevant standard chromaticities of red, green, and blue (e.g., the original NTSC primaries, SMPTE C, or Rec. 709). For the Rec. 709 (and sRGB) primaries, the linear combination, based on pure colorimetric considerations and the definition of relative luminance is: Y = 0.2126 R + 0.7152 G + 0.0722 B {\displaystyle Y=0.2126R+0.7152G+0.0722B} The formula used to calculate luma in the Rec. 709 spec arbitrarily also uses these same coefficients, but with gamma-compressed components: Y ′ = 0.2126 R ′ + 0.7152 G ′ + 0.0722 B ′ , {\displaystyle Y'=0.2126R'+0.7152G'+0.0722B',} where the prime symbol ′ denotes gamma compression. == Rec. 601 luma versus Rec. 709 luma coefficients == For digital formats following CCIR 601 (i.e. most digital standard definition formats), luma is calculated with this formula: Y 601 ′ = 0.299 R ′ + 0.587 G ′ + 0.114 B ′ {\displaystyle Y'_{\text{601}}=0.299R'+0.587G'+0.114B'} Formats following ITU-R Recommendation BT. 709 (i.e. most digital high definition formats) use a different formula: Y 709 ′ = 0.2126 R ′ + 0.7152 G ′ + 0.0722 B ′ {\displaystyle Y'_{\text{709}}=0.2126R'+0.7152G'+0.0722B'} Modern HDTV systems use the 709 coefficients, while transitional 1035i HDTV (MUSE) formats may use the SMPTE 240M coefficients: Y 240 ′ = 0.212 R ′ + 0.701 G ′ + 0.087 B ′ = Y 145 ′ {\displaystyle Y'_{\text{240}}=0.212R'+0.701G'+0.087B'=Y'_{\text{145}}} These coefficients correspond to the SMPTE RP 145 primaries (also known as "SMPTE C") in use at the time the standard was created. The change in the luma coefficients is to provide the "theoretically correct" coefficients that reflect the corresponding standard chromaticities ('colors') of the primaries red, green, and blue. However, there is some controversy regarding this decision. The difference in luma coefficients requires that component signals must be converted between Rec. 601 and Rec. 709 to provide accurate colors. In consumer equipment, the matrix required to perform this conversion may be omitted (to reduce cost), resulting in inaccurate color. == Luma and luminance errors == As well, the Rec. 709 luma coefficients may not necessarily provide better performance. Because of the difference between luma and relative luminance, luma does not exactly represent the luminance in an image. As a result, errors in chroma can affect luminance. Luma alone does not perfectly represent luminance; accurate luminance requires both accurate luma and chroma. Hence, errors in chroma "bleed" into the luminance of an image. Note the bleeding in lightness near the borders. Due to the widespread usage of chroma subsampling, errors in chroma typically occur when it is lowered in resolution/bandwidth. This lowered bandwidth, coupled with high frequency chroma components, can cause visible errors in luminance. An example of a high frequency chroma component would be the line between the green and magenta bars of the SMPTE color bars test pattern. Error in luminance can be seen as a dark band that occurs in this area.
Harmony (software)
Harmony is a Java-based software for creating high-definition music videos with 2D and 3D animations. The application was developed by Digital Chaotics, a company based in San Jose, California and established in 2010 by Ken and Leanna Scott. == History == During a March 1, 2011 interview published by The LIST magazine, Ken explained how he initially got into music and digital entertainment. According to Scott: “I came at it from both the art and the technology side. … I built one of the first digital audio synthesizers as an undergrad project back in 1979. It was a short jump from there to creating visuals with computers, too.” Taking inspiration from Fantasia – which Scott calls, “The greatest music video of all time” – he began writing software code for Harmony in late 2009, finishing the project in mid-2010. However, Scott has also said that the idea for Harmony began much earlier: I read a book in 1978 called Digital Harmony, by John H Whitney, Sr. (Interestingly, he was the father of the president of Digital Productions.) He said that there was a kind of visual art based on motion, and proposed theories about the underlying mathematical structure of visual harmony. So there's the book, combined with my desire to create art with computers-add a taste or two of things commonly used by college students during the 70's - and lots of Pink Floyd. Add it all up, and the seeds for Harmony were planted. My friends in school and at Floating Point Systems listened to me ranting about "making music videos with computers" incessantly. I'm sure it was both maddening and fascinating to see. == Features == Harmony runs on Windows 7 and Windows Vista. Currently, Digital Chaotics does not offer a macOS or Linux platform for the software. However, Harmony can be run on these platforms by running it on Windows in a virtual machine. == Harmony 2 == On November 1, 2011, Digital Chaotics released the 2.0 version of the Harmony software. Unlike the original version, the second release featured three product levels: Harmony 2 Express, Harmony 2 Pro, and Harmony 2 Extreme. The "Express" version was positioned as an entry-level, free release to allow users a chance to "test-drive" the software. The "Pro" version currently retails at $197, while the "Extreme" is priced at $397. These two versions, aimed more towards VJ and Fulldome theater usage, featured additional software capability and features such as higher resolution, more video formatting options, and more camera angles.
Color balance
In photography and image processing, color balance is the global adjustment of the intensities of the colors (typically red, green, and blue primary colors). An important goal of this adjustment is to render specific colors – particularly neutral colors like white or grey – correctly. Hence, the general method is sometimes called gray balance, neutral balance, or white balance. Color balance changes the overall mixture of colors in an image and is used for color correction. Generalized versions of color balance are used to correct colors other than neutrals or to deliberately change them for effect. White balance is one of the most common kinds of balancing, and is when colors are adjusted to make a white object (such as a piece of paper or a wall) appear white and not a shade of any other colour. Image data acquired by sensors – either film or electronic image sensors – must be transformed from the acquired values to new values that are appropriate for color reproduction or display. Several aspects of the acquisition and display process make such color correction essential – including that the acquisition sensors do not match the sensors in the human eye, that the properties of the display medium must be accounted for, and that the ambient viewing conditions of the acquisition differ from the display viewing conditions. The color balance operations in popular image editing applications usually operate directly on the red, green, and blue channel pixel values, without respect to any color sensing or reproduction model. In film photography, color balance is typically achieved by using color correction filters over the lights or on the camera lens. == Generalized color balance == Sometimes the adjustment to keep neutrals neutral is called white balance, and the phrase color balance refers to the adjustment that in addition makes other colors in a displayed image appear to have the same general appearance as the colors in an original scene. It is particularly important that neutral (gray, neutral, white) colors in a scene appear neutral in the reproduction. === Psychological color balance === Humans relate to flesh tones more critically than other colors. Trees, grass and sky can all be off without concern, but if human flesh tones are 'off' then the human subject can look sick or dead. To address this critical color balance issue, the tri-color primaries themselves are formulated to not balance as a true neutral color. The purpose of this color primary imbalance is to more faithfully reproduce the flesh tones through the entire brightness range. == Illuminant estimation and adaptation == Most digital cameras have means to select color correction based on the type of scene lighting, using either manual lighting selection, automatic white balance, or custom white balance. The algorithms for these processes perform generalized chromatic adaptation. Many methods exist for color balancing. Setting a button on a camera is a way for the user to indicate to the processor the nature of the scene lighting. Another option on some cameras is a button which one may press when the camera is pointed at a gray card or other neutral colored object. This captures an image of the ambient light, which enables a digital camera to set the correct color balance for that light. There is a large literature on how one might estimate the ambient lighting from the camera data and then use this information to transform the image data. A variety of algorithms have been proposed, and the quality of these has been debated. A few examples and examination of the references therein will lead the reader to many others. Examples are Retinex, an artificial neural network or a Bayesian method. == Chromatic colors == Color balancing an image affects not only the neutrals, but other colors as well. An image that is not color balanced is said to have a color cast, as everything in the image appears to have been shifted towards one color. Color balancing may be thought in terms of removing this color cast. Color balance is also related to color constancy. Algorithms and techniques used to attain color constancy are frequently used for color balancing, as well. Color constancy is, in turn, related to chromatic adaptation. Conceptually, color balancing consists of two steps: first, determining the illuminant under which an image was captured; and second, scaling the components (e.g., R, G, and B) of the image or otherwise transforming the components so they conform to the viewing illuminant. Viggiano found that white balancing in the camera's native RGB color model tended to produce less color inconstancy (i.e., less distortion of the colors) than in monitor RGB for over 4000 hypothetical sets of camera sensitivities. This difference typically amounted to a factor of more than two in favor of camera RGB. This means that it is advantageous to get color balance right at the time an image is captured, rather than edit later on a monitor. If one must color balance later, balancing the raw image data will tend to produce less distortion of chromatic colors than balancing in monitor RGB. == Mathematics of color balance == Color balancing is sometimes performed on a three-component image (e.g., RGB) using a 3x3 matrix. This type of transformation is appropriate if the image was captured using the wrong white balance setting on a digital camera, or through a color filter. Changing the color balance of an image can improve classifier results on a trained ML model. === Scaling monitor R, G, and B === In principle, one wants to scale all relative luminances in an image so that objects which are believed to be neutral appear so. If, say, a surface with R = 240 {\displaystyle R=240} was believed to be a white object, and if 255 is the count which corresponds to white, one could multiply all red values by 255/240. Doing analogously for green and blue would result, at least in theory, in a color balanced image. In this type of transformation the 3x3 matrix is a diagonal matrix. [ R G B ] = [ 255 / R w ′ 0 0 0 255 / G w ′ 0 0 0 255 / B w ′ ] [ R ′ G ′ B ′ ] {\displaystyle \left[{\begin{array}{c}R\\G\\B\end{array}}\right]=\left[{\begin{array}{ccc}255/R'_{w}&0&0\\0&255/G'_{w}&0\\0&0&255/B'_{w}\end{array}}\right]\left[{\begin{array}{c}R'\\G'\\B'\end{array}}\right]} where R {\displaystyle R} , G {\displaystyle G} , and B {\displaystyle B} are the color balanced red, green, and blue components of a pixel in the image; R ′ {\displaystyle R'} , G ′ {\displaystyle G'} , and B ′ {\displaystyle B'} are the red, green, and blue components of the image before color balancing, and R w ′ {\displaystyle R'_{w}} , G w ′ {\displaystyle G'_{w}} , and B w ′ {\displaystyle B'_{w}} are the red, green, and blue components of a pixel which is believed to be a white surface in the image before color balancing. This is a simple scaling of the red, green, and blue channels, and is why color balance tools in Photoshop have a white eyedropper tool. It has been demonstrated that performing the white balancing in the phosphor set assumed by sRGB tends to produce large errors in chromatic colors, even though it can render the neutral surfaces perfectly neutral. === Scaling X, Y, Z === If the image may be transformed into CIE XYZ tristimulus values, the color balancing may be performed there. This has been termed a "wrong von Kries" transformation. Although it has been demonstrated to offer usually poorer results than balancing in monitor RGB, it is mentioned here as a bridge to other things. Mathematically, one computes: [ X Y Z ] = [ X w / X w ′ 0 0 0 Y w / Y w ′ 0 0 0 Z w / Z w ′ ] [ X ′ Y ′ Z ′ ] {\displaystyle \left[{\begin{array}{c}X\\Y\\Z\end{array}}\right]=\left[{\begin{array}{ccc}X_{w}/X'_{w}&0&0\\0&Y_{w}/Y'_{w}&0\\0&0&Z_{w}/Z'_{w}\end{array}}\right]\left[{\begin{array}{c}X'\\Y'\\Z'\end{array}}\right]} where X {\displaystyle X} , Y {\displaystyle Y} , and Z {\displaystyle Z} are the color-balanced tristimulus values; X w {\displaystyle X_{w}} , Y w {\displaystyle Y_{w}} , and Z w {\displaystyle Z_{w}} are the tristimulus values of the viewing illuminant (the white point to which the image is being transformed to conform to); X w ′ {\displaystyle X'_{w}} , Y w ′ {\displaystyle Y'_{w}} , and Z w ′ {\displaystyle Z'_{w}} are the tristimulus values of an object believed to be white in the un-color-balanced image, and X ′ {\displaystyle X'} , Y ′ {\displaystyle Y'} , and Z ′ {\displaystyle Z'} are the tristimulus values of a pixel in the un-color-balanced image. If the tristimulus values of the monitor primaries are in a matrix P {\displaystyle \mathbf {P} } so that: [ X Y Z ] = P [ L R L G L B ] {\displaystyle \left[{\begin{array}{c}X\\Y\\Z\end{array}}\right]=\mathbf {P} \left[{\begin{array}{c}L_{R}\\L_{G}\\L_{B}\end{array}}\right]} where L R {\displaystyle L_{R}} , L G {\displaystyle L_{G}} , and L B {\displaystyle L_{B}} are the un-gamma corrected monitor RGB, one may use: [ L R L G L B ] = P − 1 [ X w / X w ′ 0 0
Drops (app)
Drops is a language learning app that was created in Estonia by Daniel Farkas and Mark Szulyovszky in 2015. It is the second product from the company, after their first app, LearnInvisible, had issues in retaining a user's engagement over the required time period. The languages available include Native Hawaiian and Māori, and was classified as one of the fifty "Most Innovative Companies" for 2019 by Fast Company. The company partnered with Global Eagle Entertainment to include Travel Talk, a feature intended to focus on words and phrases frequently used by travelers. At the beginning of the COVID-19 pandemic in March 2020, the number of users increased by 55 percent in the United States and 92 percent in the United Kingdom. Droplets, a language app for children, includes profiles for multiple teachers working with remote students. The company also produces an app called Scripts, intended to help users learn to write alphabets. The app was purchased by the Norwegian company Kahoot! on 24 November 2020.