AI Assistant Zara

AI Assistant Zara — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

Film-out

Film-out is the process in the computer graphics, video production and filmmaking disciplines of transferring images or animation from videotape or digital files to a traditional film print. Film-out is a broad term that encompasses the conversion of frame rates, color correction, as well as the actual printing, also called scannior recording. The film-out process is different depending on the regional standard of the master videotape in question – NTSC, PAL, or SECAM – or likewise on the several emerging region-independent formats of high definition video (HD video); thus each type is covered separately, taking into account regional film-out industries, methods and technical considerations. == Live action video == Many modern documentaries and low-budget films are shot on videotape or other digital video media, instead of film stock, and completed as digital video. Video production means substantially lower costs than 16 mm or 35 mm film production on all levels. Until recently, the relatively low cost of video ended when the issue of a theatrical presentation was raised, which required a print for film projection. With the growing presence of digital projection, this is becoming less of a factor. === Standard definition (SD) video === Film-out of standard-definition video – or any source that has an incompatible frame rate – is the up-conversion of video media to film for theatrical viewing. The video-to-film conversion process consists of two major steps: first, the conversion of video into digital film frames which are then stored on a computer or on HD videotape; and secondly, the printing of these digital film frames onto actual film. To understand these two steps, it is important to understand how video and film differ. Film (sound film, at least) has remained unchanged for almost a century and creates the illusion of moving images through the rapid projection of still images, frames, upon a screen, typically 24 per second. Traditional interlaced SD video has no real frame rate, (though the term frame is applied to video, it has a different meaning). Instead, video consists of a very fast succession of horizontal lines that continually cascade down the television screen – streaming top to bottom, before jumping back to the top and then streaming down to the bottom again, repeatedly, almost 60 alternating screen-fulls every second for NTSC, or exactly 50 such screen-fulls per second for PAL and SECAM. Since visual movement in video is infused in this continuous cascade of scan lines, there is no discrete image or real frame that can be identified at any one time. Therefore, when transferring video to film, it is necessary to invent individual film frames, 24 for every second of elapsed time. The bulk of the work done by a film-out company is this first step, creating film frames out of the stream of interlaced video. Each company employs its own (often proprietary) technology for turning interlaced video into high-resolution digital video files of 24 discrete images every second, called 24 progressive video or 24p. The technology must filter out all the visually unappealing artifacting that results from the inherent mismatch between video and film movement. Moreover, the conversion process usually requires human intervention at every edit point of a video program, so that each type of scene can be calibrated for maximum visual quality. The use of archival footage in video especially calls for extra attention. Step two, the scanning to film, is the rote part of the process. This is the mechanical step where lasers print each of the newly created frames of the 24p video, stored on computer files or HD videotape, onto rolls of film. Most companies that do film-out, do all the stages of the process themselves for a lump sum. The job includes converting interlaced video into 24p and often a color correction session – (calibrating the image for theatrical projection), before scanning to physical film, (possibly followed by color correction of the film print made from the digital intermediary) – is offered. At the very least, film-out can be understood as the process of converting interlaced video to 24p and then scanning it to film. ==== NTSC video ==== NTSC is the most challenging of the formats when it comes to standards conversion and, specifically, converting to film prints. NTSC runs at the approximate rate of 29.97 video frames (consisting of two interlaced screen-fulls of scan lines, called fields, per frame) per second. In this way, NTSC resolves actual live action movement at almost – but not quite – 60 alternating half-resolution images every second. Because of this 29.97 rate, no direct correlation to film frames at 24 frames per second can be achieved. NTSC is hardest to reconcile with film, thus motivating its own unique processes. ==== PAL and SECAM video ==== PAL and SECAM run at 25 interlaced video frames per second, which can be slowed down or frame-dropped, then deinterlaced, to correlate frame for frame with film running at 24 actual frames per second. PAL and SECAM are less complex and demanding than NTSC for film-out. PAL and SECAM conversions do agitate, though, with the unpleasant choice between slowing down video (and audio pitch, noticeably) by four percent, from 25 to 24 frames per second, in order to maintain a 1:1 frame match, slightly changing the rhythm and feel of the program; or maintaining original speed by periodically dropping frames, thereby creating jerkiness and possible loss of vital detail in fast-moving action or precise edits. === High definition (HD) digital video === High definition digital video can be shot at a variety of frame rates, including 29.97 interlaced (like NTSC) or progressive; or 25 interlaced (like PAL) or progressive; or even 24-progressive (just like film). HD, if shot in 24-progressive, scans nearly perfectly to film without the need for a frame or field conversion process. Other issues remain though, based on the different resolutions, color spaces, and compression schemes that exist in the high-definition video world. == Computer graphics and animation == Artists working with CGI-Computer-generated imagery animation computers create pictures frame by frame. Once the finished product is done, the frames are outputted, normally in a DPX file. These picture data files can then be put on to film using a film recorder for film out. SGI computers started the high-end CGI-Computer-generated imagery animation systems, but with faster computers and the growth of Linux-based systems, many others are on the market now. Movies fully rendered and animated in CGI such as Toy Story, and Antz utilize the film-out method to produce 35mm copies for archival and release prints. Most CGI work is done in 2K Display resolution files (about the size of QXGA) and then output to the Film-out device for creation of 35 mm elements. With 4K Display resolution digital intermediates on the rise, newer types of film-out recorders are being developed to accept 4k resolution files. A 2K movie requires a Storage Area Network storage several terabytes in size to be properly stored and played out. Computer graphics files are handled the same way but in single frames and may use DPX, TIFF or other file formats. == Digital intermediates == Film-out-recording is the last step of digital intermediate workflow. DPX files that were scanned on a motion picture film scanner are stored on a storage area network (often abbreviated as SAN). The scanned DPX footage is edited and composited-FX on workstations, then mastered back on film. Film restoration is also done this way. A "film intermediate" is an analog variation of a digital intermediate, where a project shot on digital video is printed onto film stock and transferred back to digital video to emulate film. The term was coined after it was used on the Oscar-winning 2012 short film "Curfew". The process was also used on the films Dune (2021) and The Batman (2022). == Images for graphic design and print industries == The days of newspapers and magazines shooting 35mm film are almost gone. Digital cameras can now shoot all the images needed, storing them as files (e.g. JPEG, DPX or another format) that are readily edited prior to use. Once the final copy is approved, it can be filmed out for publishing. Digital stills are not the only way to get pictures used in the graphic design and print industries. Film scanners and computer graphics programs are also common sources for graphic design and print industries. == Types of devices == The following devices are used in film-out processes: CRT recorder. Camera and a special TV display Kinescope – early type Electronic Video Recording or EVR – early type EBR Electron Beam Film Recorder 16 mm by 3M Laser film recorder, like Kodak's high-end Lightning II recorder and Arri's Arrilaser. DLP Film recorder, like Cinevation's real-time Cinevator. == History == Lately it has become possible to transfer video images, inclu
Read more →
Knowledge processing for robots

KnowRob (Knowledge processing for robots) is a system which combines knowledge representation and reasoning methods to acquire and ground knowledge. This system is the backbone of openEASE. both under developing at the Institute for Artificial Intelligence at the University of Bremen, Germany. == The framework == KnowRob can serve as a common sense framework for the integration of knowledge. This knowledge can be static encyclopedic knowledge, common sense knowledge, task descriptions, environment models, object information, observed actions, etc., which can come from different sources, like manually axiomatized, derived from observations, or imported from the web. KnowRob has been used by different research groups, as the Rice University using the ontological knowledge base in a robotic platform. As well by the Eindhoven University of Technology research group competing in the RoboCup league, in the "at Home" category, with the RoboEarth project. As well, KnowRob is mentioned in the work of some research groups from the Lucian Blaga University of Sibiu, Middle East Technical University in their combination of different knowledge bases, Keio University as related work because of the ontology service, University of Texas at Austin as related work as well because of the relation with the work presented, Hanyang University as related work as an OWL based knowledge processing framework. == Representations == To represent the knowledge, KnowRob uses the OWL ontology language and an extended first-order logic knowledge representation with computable predicates. To give the order of subactions, KnowRob includes a pair-wise ordering constrain, which gives a partial ordering. KnowRob adopts the closed-world assumption Prolog, and an open-world assumption by the use of computables. To include reasoning rules into Prolog, KnowRob uses an inference procedure beyond the capabilities of OWL to extract information about tasks executions. In its second version, KnowRob provides a logic interface to the hybrid reasoning kernel as a logic based language. This language presents the hybrid reasoning kernel as if everything were entities retrievable by providing partial descriptions for them. This entities descriptions include objects, their parts, and articulation models, environments composed of objects, software components, actions, and events. === Episodic memories === Episodic memory is related to the experience information, which is organized temporally and spatially, alongside combined with context information. In KnowRob, an episodic memory is understood as a recording that the agent makes of the ongoing activity, which includes very detailed information about the actions, motions, their purposes, effects and the behavior they generate, it also includes the images captured during execution, etc. == Usage == The knowledge is computed by external methods using Prolog queries. In the second version of the KnowRob system, is included a better structure of the packages and documentations. Which includes some extensions from the previous version, as well as a logic based language. For example, a cup description from perception can be represented in this language as: entity(Cup,[an, object, [type, cup], [shape, cylinder], [color, orange]]) As well, a controller could represent the same object as: entity(Cup, [an, object, [type, cup], [proper_physical_parts, [an, object, [type, handle], [grasp−pose, G−pose]]]]) The interface language is comparable to other query languages for symbolic knowledge bases. KnowRob's query language integrates reasoning methods, such as the simulation-based reasoning. == Goals == The goal of the KnowRob framework is to make semantic knowledge available for service robots. It is able to answer queries about missing information in vague instructions for tasks. This is possible with the actions hierarchical representation and information about objects which can be included in certain action.
Read more →
OpenNN

OpenNN (Open Neural Networks Library) is a software library written in the C++ programming language which implements neural networks, a main area of deep learning research. The library is open-source, licensed under the GNU Lesser General Public License. == Characteristics == The software implements any number of layers of non-linear processing units for supervised learning. This deep architecture allows the design of neural networks with universal approximation properties. Additionally, it allows multiprocessing programming by means of OpenMP, in order to increase computer performance. OpenNN contains machine learning algorithms as a bundle of functions. These can be embedded in other software tools, using an application programming interface, for the integration of the predictive analytics tasks. In this regard, a graphical user interface is missing but some functions can be supported by specific visualization tools. == History == The development started in 2003 at the International Center for Numerical Methods in Engineering, within the research project funded by the European Union called RAMFLOOD (Risk Assessment and Management of FLOODs). Then it continued as part of similar projects. OpenNN is being developed by the startup company Artelnics. == Applications == OpenNN is a general purpose artificial intelligence software package. It uses machine learning techniques for solving predictive analytics tasks in different fields. For instance, the library has been applied in the engineering, energy, or chemistry sectors.
Read more →
Semantic parameterization

Semantic parameterization is a conceptual modeling process for expressing natural language descriptions of a domain in first-order predicate logic. The process yields a formalization of natural language sentences in Description Logic to answer the who, what and where questions in the Inquiry-Cycle Model (ICM) developed by Colin Potts and his colleagues at the Georgia Institute of Technology. The parameterization process complements the Knowledge Acquisition and autOmated Specification (KAOS) method, which formalizes answers to the when, why and how ICM questions in Temporal Logic, to complete the ICM formalization. The artifacts used in the parameterization process include a dictionary that aligns the domain lexicon with unique concepts, distinguishing between synonyms and polysemes, and several natural language patterns that aid in mapping common domain descriptions to formal specifications. == Relationship to other theories == Semantic Parameterization defines a meta-model consisting of eight roles that are domain-independent and reusable. Seven of these roles correspond to Jeffrey Gruber's thematic relations and case roles in Charles Fillmore's case grammar: The Inquiry-Cycle Model (ICM) was introduced to drive elicitation between engineers and stakeholders in requirements engineering. The ICM consists of who, what, where, why, how and when questions. All but the when questions, which require a Temporal Logic to represent such phenomena, have been aligned with the meta-model in semantic parameterization using Description Logic (DL). == Introduction with Example == The semantic parameterization process is based on Description Logic, wherein the TBox is composed of words in a dictionary, including nouns, verbs, and adjectives, and the ABox is partitioned into two sets of assertions: 1) those assertions that come from words in the natural language statement, called the grounding, and 2) those assertions that are inferred by the (human) modeler, called the meta-model. Consider the following unstructured natural language statement (UNLS) (see Breaux et al. for an extended discussion): UNLS1.0 The customer1,1 must not share2,2 the access-code3,3 of the customer1,1 with someone4,4 who is not the provider5,4. The modeler first identifies intensional and extensional polysemes and synonyms, denoted by the subscripts: the first subscript uniquely refers to the intensional index, i.e., the same first index in two or more words refer to the same concept in the TBox; the second subscript uniquely refers to the extensional index, i.e., two same second index in two or more words refer to the same individual in the ABox. This indexing step aligns words in the statement and concepts in the dictionary. Next, the modeler identifies concepts from the dictionary to compose the meta-model. The following table illustrates the complete DL expression that results from applying semantic parameterization.
Read more →
Trazzler

Trazzler is a travel destination app that specializes in unique and local destinations. The initial concept was developed by Adam Rugel and Biz Stone in 2006 at Twitter's original offices under the name "71 miles". More than 10,000 writers and photographers have contributed and more than $350,000 in freelance contracts have been issued as a result of Trazzeler's weekly writing and photography contests. Investors in the company include SV Angel, AOL Founder Steve Case, and the Twitter founders, Evan Williams, Jack Dorsey, and Biz Stone. The company's partners are the City of Chicago, Hawaii Tourism Authority, Fairmont Hotels & Resorts, Salon.com, and Air New Zealand. Trazzler is designed for use on the iOS, Android, and Facebook.
Read more →
Tree (abstract data type)

In computer science, a tree is a widely used abstract data type that represents a hierarchical tree structure with a set of connected nodes. Each node in the tree can be connected to many children (depending on the type of tree), but must be connected to exactly one parent, except for the root node, which has no parent (i.e., the root node as the top-most node in the tree hierarchy). These constraints mean there are no cycles or "loops" (no node can be its own ancestor), and also that each child can be treated like the root node of its own subtree, making recursion a useful technique for tree traversal. In contrast to linear data structures, many trees cannot be represented by relationships between neighboring nodes (parent and children nodes of a node under consideration, if they exist) in a single straight line (called edge or link between two adjacent nodes). Binary trees are a commonly used type, which constrain the number of children for each parent to at most two. When the order of the children is specified, this data structure corresponds to an ordered tree in graph theory. A value or pointer to other data may be associated with every node in the tree, or sometimes only with the leaf nodes, which have no children nodes. The abstract data type (ADT) can be represented in a number of ways, including a list of parents with pointers to children, a list of children with pointers to parents, or a list of nodes and a separate list of parent-child relations (a specific type of adjacency list). Representations might also be more complicated, for example using indexes or ancestor lists for performance. Trees as used in computing are similar to but can be different from mathematical constructs of trees in graph theory, trees in set theory, and trees in descriptive set theory. == Terminology == A node is a structure which may contain data and connections to other nodes, sometimes called edges or links. Each node in a tree has zero or more child nodes, which are below it in the tree (by convention, trees are drawn with descendants going downwards). A node that has a child is called the child's parent node (or superior). All nodes have exactly one parent, except the topmost root node, which has none. A node might have many ancestor nodes, such as the parent's parent. Child nodes with the same parent are sibling nodes. Typically siblings have an order, with the first one conventionally drawn on the left. Some definitions allow a tree to have no nodes at all, in which case it is called empty. An internal node (also known as an inner node, inode for short, or branch node) is any node of a tree that has child nodes. Similarly, an external node (also known as an outer node, leaf node, or terminal node) is any node that does not have child nodes. The height of a node is the length of the longest downward path to a leaf from that node. The height of the root is the height of the tree. The depth of a node is the length of the path to its root (i.e., its root path). Thus the root node has depth zero, leaf nodes have height zero, and a tree with only a single node (hence both a root and leaf) has depth and height zero. Conventionally, an empty tree (tree with no nodes, if such are allowed) has height −1. Each non-root node can be treated as the root node of its own subtree, which includes that node and all its descendants. Other terms used with trees: Neighbor Parent or child. Ancestor A node reachable by repeated proceeding from child to parent. Descendant A node reachable by repeated proceeding from parent to child. Also known as subchild. Degree For a given node, its number of children. A leaf, by definition, has degree zero. Degree of tree The degree of a tree is the maximum degree of a node in the tree. Distance The number of edges along the shortest path between two nodes. Level The level of a node is the number of edges along the unique path between it and the root node. This is the same as depth. Width The number of nodes in a level. Breadth The number of leaves. Complete tree A tree with every level filled, except the last. Forest A set of one or more disjoint trees. Ordered tree A rooted tree in which an ordering is specified for the children of each vertex. Size of a tree Number of nodes in the tree. == Common operations == Enumerating all the items Enumerating a section of a tree Searching for an item Adding a new item at a certain position on the tree Deleting an item Pruning: Removing a whole section of a tree Grafting: Adding a whole section to a tree Finding the root for any node Finding the lowest common ancestor of two nodes === Traversal and search methods === Stepping through the items of a tree, by means of the connections between parents and children, is called walking the tree, and the action is a walk of the tree. Often, an operation might be performed when a pointer arrives at a particular node. A walk in which each parent node is traversed before its children is called a pre-order walk; a walk in which the children are traversed before their respective parents are traversed is called a post-order walk; a walk in which a node's left subtree, then the node itself, and finally its right subtree are traversed is called an in-order traversal. (This last scenario, referring to exactly two subtrees, a left subtree and a right subtree, assumes specifically a binary tree.) A level-order walk effectively performs a breadth-first search over the entirety of a tree; nodes are traversed level by level, where the root node is visited first, followed by its direct child nodes and their siblings, followed by its grandchild nodes and their siblings, etc., until all nodes in the tree have been traversed. == Representations == There are many different ways to represent trees. In working memory, nodes are typically dynamically allocated records with pointers to their children, their parents, or both, as well as any associated data. If of a fixed size, the nodes might be stored in a list. Nodes and relationships between nodes might be stored in a separate special type of adjacency list. In relational databases, nodes are typically represented as table rows, with indexed row IDs facilitating pointers between parents and children. Nodes can also be stored as items in an array, with relationships between them determined by their positions in the array (as in a binary heap). A binary tree can be implemented as a list of lists: the head of a list (the value of the first term) is the left child (subtree), while the tail (the list of second and subsequent terms) is the right child (subtree). This can be modified to allow values as well, as in Lisp S-expressions, where the head (value of first term) is the value of the node, the head of the tail (value of second term) is the left child, and the tail of the tail (list of third and subsequent terms) is the right child. Ordered trees can be naturally encoded by finite sequences, for example with natural numbers. == Examples of trees and non-trees == == Type theory == As an abstract data type, the abstract tree type T with values of some type E is defined, using the abstract forest type F (list of trees), by the functions: value: T → E children: T → F nil: () → F node: E × F → T with the axioms: value(node(e, f)) = e children(node(e, f)) = f In terms of type theory, a tree is an inductive type defined by the constructors nil (empty forest) and node (tree with root node with given value and children). == Mathematical terminology == Viewed as a whole, a tree data structure is an ordered tree, generally with values attached to each node. Concretely, it is (if required to be non-empty): A rooted tree with the "away from root" direction (a more narrow term is an "arborescence"), meaning: A directed graph, whose underlying undirected graph is a tree (any two vertices are connected by exactly one simple path), with a distinguished root (one vertex is designated as the root), which determines the direction on the edges (arrows point away from the root; given an edge, the node that the edge points from is called the parent and the node that the edge points to is called the child), together with: an ordering on the child nodes of a given node, and a value (of some data type) at each node. Often trees have a fixed (more properly, bounded) branching factor (outdegree), particularly always having two child nodes (possibly empty, hence at most two non-empty child nodes), hence a "binary tree". Allowing empty trees makes some definitions simpler, some more complicated: a rooted tree must be non-empty, hence if empty trees are allowed the above definition instead becomes "an empty tree or a rooted tree such that ...". On the other hand, empty trees simplify defining fixed branching factor: with empty trees allowed, a binary tree is a tree such that every node has exactly two children, each of which is a tree (possibly empty). == Applications == Trees are commonly used to represent or manipulate hierarchical data in ap
Read more →
Information Coding Classification

The Information Coding Classification (ICC) is a classification system covering almost all extant 6500 knowledge fields (knowledge domains). Its conceptualization goes beyond the scope of the well known library classification systems, such as Dewey Decimal Classification (DDC), Universal Decimal Classification (UDC), and Library of Congress Classification (LCC), by extending also to knowledge systems that so far have not afforded to classify literature. ICC actually presents a flexible universal ordering system for both literature and other kinds of information, set out as knowledge fields. From a methodological point of view, ICC differs from the above-mentioned systems along the following three lines: Its main classes are not based on disciplines but on nine live stages of development, so-called ontical levels. It breaks them roughly down into hierarchical steps by further nine categories which makes decimal number coding possible. The contents of a knowledge field is earmarked via a digital position scheme, which makes the first hierarchical step refer to the nine ontical levels (object areas as subject categories), and the second hierarchical step refer to nine functionally ordered form categories. Respective knowledge fields permit to step down by the same principle to a third and forth level, and even further to a fifth and sixth level. Finally, knowledge field subdivisions will have to conform to said digital position scheme. Hence, for a given knowledge field identical codes will mark identical categories under respective numbers of the coding system. This mnemotechnical aspect of the system helps memorizing and straightaway retrieving the whereabouts of respective interdisciplinary and transdisciplinary fields. The first two hierarchical levels may be regarded as a top- or upper ontology for ontologies and other applications. The terms of the first three hierarchical levels were set out in German and English in Wissensorganisation. Entwicklung, Aufgabe, Anwendung, Zukunft, on pp. 82 to 100. It was published in 2014 and available so far only in German. In the meantime, also the French terms of the knowledge fields have been collected. Competence for maintenance and further development rests with the German Chapter of the International Society for Knowledge Organization (ISKO) e.V. == Historical development == At the end of 1970, Prof. Alwin Diemer, Univ.of Düsseldorf proposed to Ingetraut Dahlberg to undertake a philosophical dissertation on The universal classification system of knowledge, its ontological, epistemological, and information theoretical foundations. Diemer had in mind an innovating ontological approach for such a system based on the whole spectrum of kinds of being and complying with epistemological requirements. The third requirement had already been taken up somehow in the Indian Colon Classification, yet it still called for explanations and additions. In 1974, the dissertation was published in German entitled Grundlagen universaler Wissensordnung. It started with conceptual clarifications, and why and how the term „universal“ was linked to knowledge, including knowledge fields, such as commodity science, artefacts, statistics, patents, standardization, communication, utility services et al. In chapter 3, six universal classification systems (DDC, UDC, LCC, BC, CC and BBK) were presented, analyzed and compared. While preparing the dissertation, Dahlberg started with elaborating the new universal system by first gleaning a lot of extant designations of knowledge fields from whatever available reference works. This was funded by the German Documentation Society (DGD) (1971-2) under the title of Order system of knowledge fields. In addition, the syllabuses of German universities and polytechniques were explored for relevant terms and documented (1975). Thereafter, it seemed necessary to add definitions from special dictionaries and encyclopediae; it soon appeared that the 12.500 terms included numerous synonyms, so that the whole collection boiled down to about 6.500 concept designations (Project Logstruktur, supported by the German Science Foundation (DFG) 1976-78). The outcome of this work was the formulation of 30 theses which ended up in 12 principles for the new system, published 40 years later under. These principles refer not only to theoretical foundations but also to structure and other organizational aspects of the whole array of knowledge fields. In 1974, the digital position scheme for field subdivision had already been developed to allow for classifying classification literature in the bibliographical section of the first issue of the Journal International Classification. In 1977, the entire ICC was ready for presentation at a seminar in Bangalore, India. A publication of the first three hierarchical levels appeared however only in 1982. It was applied to the bibliography of classification systems and thesauri in vol.1 of the International Classification and Indexing Bibliography; it has been updated. == Governing principles == These were published in full length in the book Wissensorganisation. Entwicklung, Aufgabe, Anwendung, Zukunft and the article Information Coding Classification. Geschichtliches, Prinzipien, Inhaltliches, hence it suffices to just mention their topics with some necessary additions. Principle 1: Concept theoretical approaches. Concepts are the contents of ICC, they are understood as being units of knowledge. The „birth“ of a concept. Where do the characteristics, the knowledge elements come from? How do conceptual relations arise? Principle 2: The four kinds of concept relations and their applications. Principle 3: Decimal numbers form the ICC codes as its universal language. Principle 4: The nine ontical levels of ICC. They were grouped under three captions: Prolegomena (1-3), life sciences (4-6) and human output (7-9): Structure and form Matter and energy Cosmos and earth Biosphere Anthroposphere Sociosphere Material products (economics and technology) Intellectual products (knowledge and information) Spiritual products (products of mind and culture) Principle 5: Knowledge fields are structured by categories, based on the Aristotelian form-categories, under a digital position scheme, a kind of scaling rule for subdividing a given field as follows: General area: problems, theories, principles (axiom and structure) Object area: objects, kinds, parts, properties of objects Activity area: methods, processes, activities Field properties or first characterization Persons or secondary characterization Societies or tertiary characterization Influences from outside Applications of the field to other fields Field information and synthesizing tasks The digital position scheme, called Systematifier, has also been used for structuring the entire system via the categories figuring on the upper zero level. An example of its application is the structure of the classification system for knowledge organization literature Gliederung der Klassifikationsliteratur. (A simplified version with an additional introduction is given in, p. 71) Principle 6: The ontical levels outlined under principle 4 conform to the „integrative level theory“ which means that every level is integrated in the following one. In addition, each knowledge area presumes the following one. Principle 7: The combination potential of knowledge fields (interdisciplinarity and transdisciplinarity)is determined by the digital position scheme. (Examples are given in, p. 103-4) Principle 8: The categories of the zero-level are general concepts, their possible subdivisions could once be used for classificatory statements. (These subdivisions still need elaboration) Principle 9 and 10: These relate to the combination potential of classificatory statements with space and time concepts. (Still to be elaborated) Principle 11: The system's mnemotechnical aspect relies on the fixed system position codes and on the 3x3 form- and subject-categories. Principle 12: The combination potential of system position 1, 8 and 9 make ICC to a self-networking system which complies with the present scientific development. == In matrix form == The first two levels of ICC can be represented by following matrix. The first hierarchical level of the 9 subject categories results from the first vertical array under codes 1-9. The second hierarchical level of subject categories is structured by the 9 functionally ordered form categories, listed in the first horizontal line under codes 01-09. Some exceptions are mentioned in principle 7. == Research == === Exploration of automatic classification === For classifying web documents as conceived by Jens Hartmann, University of Karlsruhe, Prof.Walter Koch, University of Graz, has explored in his Institute for Applied Information Technology Research Society (AIT) the application of ICC to automatically classifying metadata of some 350.000 documents. This was facilitated by data generated within the framework of an E
Read more →
OpenL Tablets

OpenL Tablets is a business rule management system (BRMS) and a business rules engine (BRE) based on table representation of rules. Engine implements optimized sequential algorithm. OpenL includes such table types as decision table, decision tree, spreadsheet-like calculator. == History == The OpenL Tablets project was started as an in-house development project in 2003 and later in 2006 was uploaded to SourceForge. Initially it was an open-source business rule engine for Java. Starting from version 5 it became a BRMS. == Technology == OpenL Tablets engine is specially designed for business rules and uses table rules presentation. Table format enforces rules to be structured and format itself is close to tables found in various business documents. OpenL Tablets is based on OpenL framework for creating custom languages running on Java VM. The engine is designed to allow pluggable language implementations. Currently, it uses 2 languages: table structure for rules format and java-like for code snippets in rules. Java-like language is Java 5.0 implementation with Business User Extensions. OpenL Tablets rules are mixture of declarative programming for rules logic and imperative programming for workflow control. Table formats are flexible enough to match the semantics of the problem domain. Tests, traces, benchmarks are integral part of the engine. It also provides powerful type definition capabilities to handle rules domain model inside rules files. The project is written in Java, but can be used at any platform using Service-oriented architecture approach, e.g. via web service. === Patents === The OpenL Tablets engine has patent pending validation feature. There are usages of OpenL Tablets which may be patented. == BRMS == OpenL Tablets includes several productivity tools and applications addressing BRMS related capabilities. They include web application to edit rules called OpenL WebStudio, web application to deploy rules as web services, Rules Repository to store and manage rules, Eclipse plug-ins to work with rules projects. == Related systems == CLIPS: public domain software tool for building expert systems. ILOG rules: a business rule management system. JBoss Drools: a business rule management system (BRMS). JESS: a rule engine for the Java platform - it is a superset of CLIPS programming language. Prolog: a general purpose logic programming language. DTRules: a Decision Table-based, open-sourced rule engine for Java.
Read more →
StyleGAN

The Style Generative Adversarial Network, or StyleGAN for short, is an extension to the GAN architecture introduced by Nvidia researchers in December 2018, and made source available in February 2019. StyleGAN depends on Nvidia's CUDA software, GPUs, and Google's TensorFlow, or Meta AI's PyTorch, which supersedes TensorFlow as the official implementation library in later StyleGAN versions. The second version of StyleGAN, called StyleGAN2, was published on February 5, 2020. It removes some of the characteristic artifacts and improves the image quality. Nvidia introduced StyleGAN3, described as an "alias-free" version, on June 23, 2021, and made source available on October 12, 2021. == History == A direct predecessor of the StyleGAN series is the Progressive GAN, published in 2017. In December 2018, Nvidia researchers distributed a preprint with accompanying software introducing StyleGAN, a GAN for producing an unlimited number of (often convincing) portraits of fake human faces. StyleGAN was able to run on Nvidia's commodity GPU processors. In February 2019, Uber engineer Phillip Wang used the software to create the website This Person Does Not Exist, which displayed a new face on each web page reload. Wang himself has expressed amazement, given that humans are evolved to specifically understand human faces, that nevertheless StyleGAN can competitively "pick apart all the relevant features (of human faces) and recompose them in a way that's coherent." In September 2019, a website called Generated Photos published 100,000 images as a collection of stock photos. The collection was made using a private dataset shot in a controlled environment with similar light and angles. Similarly, two faculty at the University of Washington's Information School used StyleGAN to create Which Face is Real?, which challenged visitors to differentiate between a fake and a real face side by side. The faculty stated the intention was to "educate the public" about the existence of this technology so they could be wary of it, "just like eventually most people were made aware that you can Photoshop an image". The second version of StyleGAN, called StyleGAN2, was published on February 5, 2020. It removes some of the characteristic artifacts and improves the image quality. In 2021, a third version was released, improving consistency between fine and coarse details in the generator. Dubbed "alias-free", this version was implemented with PyTorch. === Illicit use === In December 2019, Facebook took down a network of accounts with false identities, and mentioned that some of them had used profile pictures created with machine learning techniques. == Architecture == === Progressive GAN === Progressive GAN is a method for training GAN for large-scale image generation stably, by growing a GAN generator from small to large scale in a pyramidal fashion. Like SinGAN, it decomposes the generator as G = G 1 ∘ G 2 ∘ ⋯ ∘ G N {\displaystyle G=G_{1}\circ G_{2}\circ \cdots \circ G_{N}} , and the discriminator as D = D N ∘ D N − 1 ∘ ⋯ ∘ D 1 {\displaystyle D=D_{N}\circ D_{N-1}\circ \cdots \circ D_{1}} . During training, at first only G N , D N {\displaystyle G_{N},D_{N}} are used in a GAN game to generate 4x4 images. Then G N − 1 , D N − 1 {\displaystyle G_{N-1},D_{N-1}} are added to reach the second stage of GAN game, to generate 8x8 images, and so on, until we reach a GAN game to generate 1024x1024 images. To avoid discontinuity between stages of the GAN game, each new layer is "blended in" (Figure 2 of the paper). For example, this is how the second stage GAN game starts: Just before, the GAN game consists of the pair G N , D N {\displaystyle G_{N},D_{N}} generating and discriminating 4x4 images. Just after, the GAN game consists of the pair ( ( 1 − α ) + α ⋅ G N − 1 ) ∘ u ∘ G N , D N ∘ d ∘ ( ( 1 − α ) + α ⋅ D N − 1 ) {\displaystyle ((1-\alpha )+\alpha \cdot G_{N-1})\circ u\circ G_{N},D_{N}\circ d\circ ((1-\alpha )+\alpha \cdot D_{N-1})} generating and discriminating 8x8 images. Here, the functions u , d {\displaystyle u,d} are image up- and down-sampling functions, and α {\displaystyle \alpha } is a blend-in factor (much like an alpha in image composing) that smoothly glides from 0 to 1. === StyleGAN === StyleGAN is designed as a combination of Progressive GAN with neural style transfer. The key architectural choice of StyleGAN-1 is a progressive growth mechanism, similar to Progressive GAN. Each generated image starts as a constant 4 × 4 × 512 {\displaystyle 4\times 4\times 512} array, and repeatedly passed through style blocks. Each style block applies a "style latent vector" via affine transform ("adaptive instance normalization"), similar to how neural style transfer uses Gramian matrix. It then adds noise, and normalize (subtract the mean, then divide by the variance). At training time, usually only one style latent vector is used per image generated, but sometimes two ("mixing regularization") in order to encourage each style block to independently perform its stylization without expecting help from other style blocks (since they might receive an entirely different style latent vector). After training, multiple style latent vectors can be fed into each style block. Those fed to the lower layers control the large-scale styles, and those fed to the higher layers control the fine-detail styles. Style-mixing between two images x , x ′ {\displaystyle x,x'} can be performed as well. First, run a gradient descent to find z , z ′ {\displaystyle z,z'} such that G ( z ) ≈ x , G ( z ′ ) ≈ x ′ {\displaystyle G(z)\approx x,G(z')\approx x'} . This is called "projecting an image back to style latent space". Then, z {\displaystyle z} can be fed to the lower style blocks, and z ′ {\displaystyle z'} to the higher style blocks, to generate a composite image that has the large-scale style of x {\displaystyle x} , and the fine-detail style of x ′ {\displaystyle x'} . Multiple images can also be composed this way. === StyleGAN2 === StyleGAN2 improves upon StyleGAN in two ways. One, it applies the style latent vector to transform the convolution layer's weights instead, thus solving the "blob" problem. The "blob" problem roughly speaking is because using the style latent vector to normalize the generated image destroys useful information. Consequently, the generator learned to create a "distraction" by a large blob, which absorbs most of the effect of normalization (somewhat similar to using flares to distract a heat-seeking missile). Two, it uses residual connections, which helps it avoid the phenomenon where certain features are stuck at intervals of pixels. For example, the seam between two teeth may be stuck at pixels divisible by 32, because the generator learned to generate teeth during stage N-5, and consequently could only generate primitive teeth at that stage, before scaling up 5 times (thus intervals of 32). This was updated by the StyleGAN2-ADA ("ADA" stands for "adaptive"), which uses invertible data augmentation. It also tunes the amount of data augmentation applied by starting at zero, and gradually increasing it until an "overfitting heuristic" reaches a target level, thus the name "adaptive". === StyleGAN3 === StyleGAN3 improves upon StyleGAN2 by solving the "texture sticking" problem, which can be seen in the official videos. They analyzed the problem by the Nyquist–Shannon sampling theorem, and argued that the layers in the generator learned to exploit the high-frequency signal in the pixels they operate upon. To solve this, they proposed imposing strict lowpass filters between each generator's layers, so that the generator is forced to operate on the pixels in a way faithful to the continuous signals they represent, rather than operate on them as merely discrete signals. They further imposed rotational and translational invariance by using more signal filters. The resulting StyleGAN-3 is able to generate images that rotate and translate smoothly, and without texture sticking.
Read more →
DreamBooth

DreamBooth is a deep learning generation model used to personalize existing text-to-image models by fine-tuning. It was developed by researchers from Google Research and Boston University in 2022. Originally developed using Google's own Imagen text-to-image model, DreamBooth implementations can be applied to other text-to-image models, where it can allow the model to generate more fine-tuned and personalized outputs after training on three to five images of a subject. == Technology == Pretrained text-to-image diffusion models, while often capable of offering a diverse range of different image output types, lack the specificity required to generate images of lesser-known subjects, and are limited in their ability to render known subjects in different situations and contexts. The methodology used to run implementations of DreamBooth involves the fine-tuning the full UNet component of the diffusion model using a few images (usually 3--5) depicting a specific subject. Images are paired with text prompts that contain the name of the class the subject belongs to, plus a unique identifier. As an example, a photograph of a [Nissan R34 GTR] car, with car being the class); a class-specific prior preservation loss is applied to encourage the model to generate diverse instances of the subject based on what the model is already trained on for the original class. Pairs of low-resolution and high-resolution images taken from the set of input images are used to fine-tune the super-resolution components, allowing the minute details of the subject to be maintained. == Usage == DreamBooth can be used to fine-tune models such as Stable Diffusion, where it may alleviate a common shortcoming of Stable Diffusion not being able to adequately generate images of specific individual people. Such a use case is quite VRAM intensive, however, and thus cost-prohibitive for hobbyist users. The Stable Diffusion adaptation of DreamBooth in particular is released as a free and open-source project based on the technology outlined by the original paper published by Ruiz et. al. in 2022. Concerns have been raised regarding the ability for bad actors to utilise DreamBooth to generate misleading images for malicious purposes, and that its open-source nature allows anyone to utilise or even make improvements to the technology. In addition, artists have expressed their apprehension regarding the ethics of using DreamBooth to train model checkpoints that are specifically aimed at imitating specific art styles associated with human artists; one such critic is Hollie Mengert, an illustrator for Disney and Penguin Random House who has had her art style trained into a checkpoint model via DreamBooth and shared online, without her consent.
Read more →
Political Declaration on Responsible Military Use of Artificial Intelligence and Autonomy

The Political Declaration on Responsible Military Use of Artificial Intelligence and Autonomy is an international norms and arms control proposal by the U.S. government for artificial intelligence in the military. It was announced at the Summit on Responsible Artificial Intelligence in the Military Domain by Bonnie Jenkins, Under Secretary of State for Arms Control. As of January 2024, fifty-one countries have signed the declaration. The US government sees it as an extension of the Department of Defense Directive 3000.09 which is the current US policy on autonomous weapons. It covers areas such as Lethal autonomous weapons and weapons decision-making.
Read more →
Versata

Versata is a privately held software company, one of several business units under the ESW Capital umbrella. Versata acquires underperforming or financially struggling enterprise software companies, integrates them into their portfolio, and makes operational changes to improve the viability and performance of the companies. == History == === Early years (1991–2000) === This company was founded in 1991 with the name Image Innovations; Naren Bakshi was co-founder and president, Kevin Fletcher Tweedy was vice president of technology, and they sold a development tool set named Image Application WorkBench that worked with Plexus Software's imaging platform. In 1997, the company name changed to Vision Software. They sold a small suite of software: Vision Builder for accelerated coding; and Vision StoryBoard Pro for creating software documentation. In 1998, their flagship product was a Java development tool named Vision JADE. In January 2000, the company changed names again, this time to Versata, and their e-business automation system, Versata Logic Suite, had three components: Versata Logic Server to host business rules written in Java, Versata Studio for developing the business rules, and Versata Connectors for connecting the logic server to IBM database servers. === Public company (2000–2006) === They went public in March 2000 during the dot-com bubble, raising about $94 million and reaching a market capitalization of over $2.5 billion despite reporting just $13 million in revenue and a $21 million loss in the prior year. In November 2000, Versata expanded into the business workflow area with the acquisition of Verve, Inc. and its workflow management system by the same name. From early 2001 through mid-2003, Versata's revenues were in quarter-over-quarter decline until Alan Baratz took over as CEO. Five consecutive quarters of growth followed until early 2005, when revenues once again took a downward plunge. In mid-2005, the company was notified by NASDAQ that it no longer met NASDAQ's requirements for continued listing, related to maintenance of a minimum amount of shareholder's equity, market value, or net income. In July 2005, Versata was delisted from NASDAQ and publicly traded on the OTC (also known as the Pink Sheets). == Versata, a business unit of ESW Capital == In January 2006, Austin-based Trilogy, Inc. acquired the company and took it private. Trilogy then proceeded to merge portions of Trilogy, specifically, Trilogy Technology Group, into Versata and began acquiring further companies, reorganizing dramatically and offshoring most technical positions to its office in Bangalore, India. From 2006 to 2008, Versata continued to make acquisitions mostly in US. Most of the employees in the acquired companies were laid -off with the majority work being offshored to its India office in Bangalore. In early 2009, Versata made another major overhaul of its business model when it asked all its employees in India to work as contractors through oDesk for a gDev which is an entity incorporated by Trilogy to manage its outsourcing activities. The only employees left in Versata were the ones in US. == Acquisitions == a Corizon was acquired by Metatomix, while Metatomix was part of Versata. b Infopia was acquired by Everest Software, while Everest Software was part of Versata. c Symphony Commerce was acquired by Quantum Retail, while Quantum Retail was part of Versata. == Legal disputes == === Patent infringement and "poison pill" lawsuits with Selectica === The legal disputes with Selectica began in 2004 (before Trilogy acquired Versata in January 2006) and lasted until 2010. While there were many suits and counter-suits, they largely centered around three issues: 2004–2006: Patent infringement in configure, price, and quote (CPQ) software 2005–2007: Patent infringement in contract lifecycle management (CLM) software 2008–2010: The "poison pill" lawsuit In 2004, Selectica and Trilogy had competing CPQ software: Selectica sold Solutions Advisor and Deal Optimization, while Trilogy sold Selling Chain. In April of that year, Trilogy Software sued Selectica for patent infringement. In 2005, before the court ruling, Trilogy made several offers to buy Selectica, but the board rejected them. In January 2006, the court ordered Selectica to pay Trilogy $7.5 million in damages. Four days after the January 2006 judgment in the first lawsuit, Trilogy announced its acquisition of Versata for an undisclosed amount. In 2005, Selectica had acquired the Determine CLM software platform, which included features that overlapped with some offered by Versata. In October 2006, Versata filed a second patent infringement lawsuit. The case was settled in 2007, with Selectica agreeing to pay Trilogy and Versata $10 million, plus up to $7.5 million in additional contingent payments. In 2008, Versata began acquiring Selectica stock. By December, Selectica's board amended its shareholder rights plan to adopt a "poison pill" with an unusually low trigger threshold: if any shareholder acquired more than 4.99% of company stock, their ownership would be diluted. The board explained that the move was meant to protect Selectica's net operating losses (NOLs), which were tax-deductible if the company returned to profitability. Under IRS Section 382, a significant change in stock ownership could cause those NOLs to be disqualified. Versata intentionally triggered the poison pill and also offered to sell back the stocks at a profit (greenmailing them), which prompted a legal dispute over whether Selectica's board had the authority to set such a low threshold and whether defending NOLs justified triggering shareholder dilution. The case ultimately reached the Delaware Supreme Court, which upheld the poison pill in October 2010, ruling in favor of Selectica. === Intellectual property lawsuit over joint development with Sun Microsystems === In 1998, Sun Microsystems hired Trilogy to help Sun's developers in California create a software configurator (later named the WC5 Configurator) that Sun's customers could use to modify products they wanted to buy, customizing products to have the features they wanted. Trilogy worked on the WC5 Configurator for several years, then Sun transferred the work to Oracle to finish. Trilogy believed that they owned the copyright to the work they'd done for Sun, and in 2006 after the merger with Versata they sued Sun for more than $100 million in damages. In April 2009, a jury ruled in favor of Sun and rejected Versata's claims. === Patent lawsuit and ruling on patents of abstract ideas with SAP === SAP developed Pricing Engine, a component in their enterprise resource planning (ERP) system. It competed with an older Trilogy product called Pricer, which was part of Trilogy's Selling Chain platform in the mid-1990s before they merged with Versata. In April 2007—the year after Trilogy acquired Versata—Versata filed a lawsuit against SAP for patent infringement. In August 2009, the jury agreed with Versata and awarded them $139 million. The court granted a new trial on damages and in September 2011, in the retrial, the jury awarded Versata $345 million. This then went to the US Court of Appeals, which in May 2013 affirmed the $345 million damages award, plus interest that had accumulated. In October 2014, Versata and SAP settled their litigation for an undisclosed amount of money. With the dispute between Versata and SAP settled, in June 2013 the Patent Trial and Appeal Board (PTAB) reviewed the validity of the patent itself, and issued a decision in a Covered Business Method (CBM) review, stating that the disputed items were abstract ideas and thus under the US patent law not patentable. In July 2015, the Federal Circuit agreed with PTAB's decision that the challenged items were not patentable. === Trade secrets and damages dispute with Internet Brands === Internet Brands was formerly known as CarsDirect and AutoData Solutions. Like Trilogy, they made software for automakers that helped customers compare vehicles online. In the late 1990s, Trilogy and Internet Brands tried to combine their products but failed to do so, and after a December 1999 lawsuit they made a settlement agreement in May 2001. In 2008, Versata sued Internet Brands claiming they had violated the settlement agreement by making presentations to potential clients stating they had a license from Versata to use and sell Versata technical solutions; and doing so had cost Versata business with Chrysler. Internet Brands' countersuit argued that Versata had misappropriated trade secrets and asked the jury to use Versata's business relationship with Toyota—including revenue from Toyota contracts—as a benchmark to calculate damages. The jury agreed and used that data to determine a $2 million damages award in favor of Internet Brands’ subsidiary, AutoData Solutions. Versata appealed the decision, and in January 2014 the court upheld the $2 million award to Internet Brands. === Patent challenges a
Read more →
Edge inference

Edge inference is the process of running machine learning or deep learning models on local devices (edge devices) such as smartphones, IoT devices, embedded systems, and edge servers instead of centralized cloud computing infrastructure. A key feature of edge computing is edge inference, which allows for real-time data processing, low latency, and improved privacy by reducing the amount of data sent to remote servers.
Read more →
Knowledge value chain

A knowledge value chain is a sequence of intellectual tasks by which knowledge workers build their employer's unique competitive advantage and/or social and environmental benefit. As an example, the components of a research and development project form a knowledge value chain. Productivity improvements in a knowledge value chain may come from knowledge integration in its original sense of data systems consolidation. Improvements also flow from the knowledge integration that occurs when knowledge management techniques are applied to the continuous improvement of a business process or processes. The term first started coming into common use around 1999, appearing in management-related talks and papers. It was registered as a trademark in 2004 by TW Powell Co., a Manhattan company. Knowledge value chain processes Knowledge acquisition Knowledge storage Knowledge dissemination Knowledge application
Read more →
Jess (programming language)

Jess is a rule engine for the Java computing platform, written in the Java programming language. It was developed by Ernest Friedman-Hill of Sandia National Laboratories. It is a superset of the CLIPS language. It was first written in late 1995. The language provides rule-based programming for the automation of an expert system, and is often termed as an expert system shell. In recent years, intelligent agent systems have also developed, which depend on a similar ability. Rather than a procedural paradigm, where one program has a loop that is activated only one time, the declarative paradigm used by Jess applies a set of rules to a set of facts continuously by a process named pattern matching. Rules can modify the set of facts, or can execute any Java code. It uses the Rete algorithm to execute rules. == License == The licensing for Jess is freeware for education and government use, and is proprietary software, needing a license, for commercial use. In contrast, CLIPS, which is the basis and starting code for Jess, is free and open-source software. == Code examples == Code examples: Sample code:
Read more →