AI Avatar Background

AI Avatar Background — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

  • Agent verification

    Agent verification

    Agent verification is activity to gain assurances that purposeful artificial constructs act in accordance with their specifications. While primitive forms of inorganic agents have been used in manufacturing for centuries, the study of artificial agents did not begin until the mid 20th century. Foundational work on such agents was closely bound with the emergence of artificial intelligence as an academic discipline. Early agents deployed for industrial control systems and in computing were often controlled by quite simple logic however, not involving artificial intelligence as such. When deployed as part of a multi-agent system, even such simple agents could require special agent orientated testing methods, as their collective behaviour was challenging to verify with traditional testing techniques. Difficulties in providing assurances that agents will not behave in dangerous ways became more prevalent after the introduction of LLM agents, especially after the rapid acceleration of their deployment in 2025. The verification of agent behaviour can be conducted by formal or informal methods. Informal verification requires less mathematical skill. But when agents are part of systems where errors have significant risks — such as danger to human life, environmental damage or major financial loss — formal verification is preferred. Both regulators and system designers themselves like formal verification as it provides a high degree of mathematical certainty. It is not however always possible to formally test all aspects of an agent based system's behaviour, especially where newer LLM based agents are concerned, due in part to their high degree of autonomy. Accordingly, agent verification for low impact deployments might be carried out only with informal methods, while for high impact deployments, it may be performed with a mix of formal and informal techniques. == Terminology == In academia, the term agent verification is often defined to mean activity concerned with gaining assurance that the agent behaves in accordance with its specification - whether by processes such as testing or simulation. 'Verification' is typically contrasted with 'validation', the latter meaning activity concerned with checking that the specification itself meets user or real world needs. Such definitions are not universally adhered to however - for example, in some workplaces and documents, the words 'verification' and 'validation' can be used synonymously. Efforts to gain confidence in Agents have intensified sharply since 2025 due to the rapid roll out of LLM agents; different terms are sometimes used in the commercial sector. Here the term 'agent verification' can be used in the same sense as it is in academia, but sometimes the same activity can be covered by more ambiguous and wider ranging terms such as 'Agent governance' , 'Agent observability' or 'AI agent policing'. == History == === Classical agents === The theoretical underpinnings for artificial (inorganic) agents emerged in the mid 20th century, with establishment of cybernetics and artificial intelligence. Oliver Selfridge's 1958 Pandemonium - A Paradigm for Learning paper was an important early theoretical contribution in establishing agent oriented architecture. Practical implementations of agents for real world applications began to become widespread in the 1990s, after the introduction of the belief–desire–intention software model (BDI), and agent-oriented programming. Pure digital agents were deployed in computer infrastructure for purposes such as monitoring, while agents connected to real-world sensors and actuators were increasingly used in industrial control systems. While the concept of artificial agents was interwoven with early artificial intelligence studies right from the start, early agents lacked general purpose reasoning capabilities, often only having simple if then logic. Even a device as simple as a thermostat, which has a sensor and a means of acting, can be considered a proto agent in this sense. Verifying the behaviours of a simple single agent system is not generally especially difficult, but it can be a different matter when several simple agents coexist in the same system. Craig Reynolds's work on boids showed that relatively complex, "intelligent" behaviour can emerge from a number of such simple agents working together in a Multi-agent system (MAS). By the 1990s, even the behaviour of a single agent system could sometimes be quite complex; in accordance with the Belief–desire–intention software model, agents could have believes that might evolve over time. Agents were increasingly introduced that were controlled by quite large decision tree models, which had new vulnerabilities to adversarial attack. It was becoming increasingly apparent that traditional software verification methods had limitations for testing such agents, or even for the more primitive type of agents when they were deployed as part of a MAS. It was the use of agents for industrial control systems, sometimes associated with robotics, that lent urgency to the practice of agent verification. Informal testing might be acceptable for digital agents used say to monitor whether each of an organisation's computers are properly licensed. But with an increasing potential for faulty agents to result in a failure that might cause a large fire to break out at a chemical manufacturing plant, a botched medical operation, or even a crashed aircraft, the need to develop reliable means of verifying behaviour of such agents was considered urgent. The Foundation for Intelligent Physical Agents was established in 1996. From the late 90s, a growing number of industry and university based scientists began working on the problem, with researchers publishing papers on the verification of both single and multi agent systems. Much of this work showed how formal verification techniques like model checking could be used to gain a high level of assurance that agent based systems would conform with their specification. A 2018 systematic review covering 231 studies found that model checking was the most common technique for agent verification, with theorem proving the second most commonly used formal verification method. In the first two decades of the 20th century, agents run by AI became more common, with Siri and Alexa being well known examples. But such agents still lacked general reasoning capabilities and did not pose new pressing problems for agent verification. === General purpose reasoning agents === The advent of LLMs created huge potential for further use of artificial agents, as agents based on them could have general purpose cognitive abilities. Agents run by LLMs (and occasionally non-LLM foundation models) have similar vulnerability to adversarial attack as those run by decision tree models. The wider scope of actions for LLM agents has created new challenges for their verification, over and above those present for classical agents. For example, the LLM's neural network endows it with infinite domains, an especial challenge for traditional formal verification techniques. Academics began to study the problems involved in verifying LLM agents from 2018. Deployment of such agents began to accelerate in late 2023 after OpenAI's "function-calling" API was made available, and especially after Anthropic's late 2024 introduction of Model Context Protocol (MCP), a standardised way for LLM agents to gain contextual awareness, and to act on the world by calling various external tools. The rapid rollout of LLM agents following MCP's release has seen the task of agent verification receive increased attention within academia, and also from the private sector. In 2024 and 2025 several startups focusing on LLM agent verification have been founded in both Europe and the US to meet growing demand. == Approaches == === Formal verification === Formal verification involves proving the correctness of some or all aspects of a system using mathematical methods. Such methods can range from manual formal proof, to verification assisted with automated theorem provers like Isabelle. For agent verification, model checking is by far the most frequently used formal verification method; for pre-LLM models it was often complemented with techniques using computation tree logic. Another common method is theorem proving. Formal verification provides a higher degree of confidence than informal methods, but it is not always used, even when it is possible. Sometimes a person or organisation developing software agents won't have the necessary skills, or may not see it as worth the effort if the agent(s) will not have the ability to cause much harm even if they malfunction. When agents are deployed in systems where errors could have serious consequences, the ability of formal verification methods to provide mathematical certainty tends to be strongly preferred by both regulators and designers themselves. But even for high impact systems, formal verificatio

    Read more →
  • Flo (app)

    Flo (app)

    Flo is a period-tracking app that provides menstrual cycle, ovulation and pregnancy tracking as well as perimenopause symptom tracking that was developed by Flo Health, Inc. It has over 380 million downloads worldwide and over 70 million monthly active users as of November 2024. In mid-2024, it reached unicorn status, and became Europe’s first femtech unicorn. The company has been accused of sharing users' sensitive health data with third parties without consent and misleading its users about data practices. == History == Flo Health, Inc. was co-founded in 2015 by Dmitry and Yuri Gurski, in Belarus. Their backgrounds helped build the first version of the software having experience in other fitness and health apps. Dmitry serves as the company's CEO. The company's development hubs are in London, Amsterdam and Vilnius. In 2016, the company raised $1 million in seed round funding from Flint Capital and Haxus Venture Fund. In 2017, Flo received an investment of $5 million from Flint Capital and model Natalia Vodianova with Vodianova helping develop an awareness campaign for the company. In 2018, Flo received an investment of $6 million from Mangrove Capital Partners, with participation from Flint Capital and Haxus, giving the company a valuation of $200 million. In mid-2019, Flo received an additional investment of $7.5 million led by Founders Fund. In 2020, the Federal Trade Commission alleged that Flo had misled users about its handling of health information to third parties including Google, Facebook, AppsFlyer, and Flurry since 2016. These allegations followed a 2019 report by The Wall Street Journal in reference to Facebook. The company reached a settlement in 2021 and was required to notify users of how their personal information was shared and obtain permission before any further information was shared. The agreement also required that Flo to undertake an independent privacy audit which it completed in March 2022. In early September 2021, Flo announced it closed $50M in a Series B financing, bringing the total capital raised to $65 million and company valuation to $800M led by VNV Global and Target Global. In March 2024, the Supreme Court of British Columbia certified a class action suit against Flo for sharing intimate data with Facebook and other third parties without user knowledge. In July 2024, Flo announced it raised more than $200M in Series C financing from General Atlantic bringing its valuation beyond $1 billion. As of November 2024, the app had over 380 million downloads world wide, and over 70 million monthly active users. In 2025, Flo adopted a data intelligence platform from Databricks to power its analytics and AI features, allowing users personalized cycle predictions. In 2025, a class action lawsuit in California was settled for $56 million with Flo paying $8 million and Google paying $48 million. == Features and privacy == Flo was initially created as a period and ovulation tracking application. It now provides reminders of upcoming menstrual cycles and a place to record various other health symptoms such as contraceptive methods, vaginal discharge (leukorrhea), water intake, pains, mood swings, and sexual activity. The application is available on iOS and Android. Flo is free to download and the free basic version gives you access to period and ovulation tracking and predictions, symptom tracking, cycle history, and anonymous mode. In Pregnancy mode, the app provides tracking features and educational material for pregnancy. In October 2023, Flo launched Flo for Partners, a feature that allows users to share their Flo data with their partner. In September 2022, as a response to Roe v. Wade being overturned, Flo sped up the release of a feature called "Anonymous Mode". Flo said this mode allows users to access the app without any personal identifiers such as name, email address, or technical identifiers being associated with their health data. Flo said it uses a technology called Oblivious HTTP to help protect user privacy in Anonymous Mode. == Recognition == Flo was named to Bloomberg’s Top 25 UK Startups to Watch for 2024. Flo's Anonymous Mode feature was recognized on both Fast Company's World Changing Ideas 2023 and TIME's Best Inventions List 2023. Flo is a CES 2019 Innovation Awards Honoree in the Software and Mobile Applications category.

    Read more →
  • RIPAC (microprocessor)

    RIPAC (microprocessor)

    RIPAC was a VLSI single-chip microprocessor designed for automatic recognition of the connected speech, one of the first of this use. The project of the microprocessor RIPAC started in 1984. RIPAC was aimed to provide efficient real-time speech recognition services to the italian telephone system provided by SIP. The microprocessor was presented in September 1986 at The Hague (Netherlands) at EUSPICO conference. It was composed of 70.000 transistors and structured as Harvard architecture. The name RIPAC is the acronym for "Riconoscimento del PArlato Connesso", that means "Recognition of the connected speech" in Italian. The microprocessor was designed by the Italian companies CSELT and ELSAG and was produced by SGS: a combination of Hidden Markov Model and Dynamic Time Warping algorithms was used for processing speech signals. It was able to do real-time speech recognition of Italian and many languages with a good affordability. The chip, issued by U.S. Patent No. 4,907,278, worked at first run.

    Read more →
  • Showbox.com

    Showbox.com

    Showbox is an online video streaming platform that enables users to stream and download many videos, commonly movies and TV shows, for free. == History == The company opened the platforms to users who registered from its beta in late 2015. The platform was officially launched in February 2016, enabling any visitor to sign up and create videos online. In April 2016, Showbox was featured on the Product Hunt website, coming to the top of the website's lists for that day and week with over 1400 upvotes from the Product Hunt community. Also in April 2016, Showbox partnered with YouTube's leading multi-channel networks, including Fullscreen, BroadbandTV, StyleHaul, AwesomenessTV, and BuzzMyVideos, to enable their communities of creators to access the platform. In June 2016, the company launched Showbox For Brands, a business-oriented video creation platform, enabling companies to create video content in-house and with their communities and influencers. In March 2017, the company launched Showbox Engage, a use case of its B2B product launched in 2016, enabling companies to launch user-generated content campaigns with their communities. In April 2017, Showbox and the United Nations announced a partnership around the 70th anniversary of the declaration of human rights, with an annual, ongoing global campaign in 135 languages, inviting people worldwide to create their part of the declaration in a video from anywhere around the world. In November 2017, Showbox partnered with the Ad:tech and Digital Marketing World Forum conferences (DMWF) in New York to provide their users and communities with a User Generated Content video solution. == Technology == Showbox's video creation technology includes an online green screen feature, proprietary computer vision algorithms, deep learning technology to support the automatic creation of videos in the cloud, and advanced video composition, including special effects. == Coverage and awards == In March 2015, Showbox was nominated as one of the 10 Israeli startups to take over our TV screens this year. In July 2016, Showbox won the Publicis90 award as part of Publicis' "global initiative to foster digital entrepreneurship". In March 2017, Showbox was chosen as one of The Culture Trip's 10 startups to watch for in 2017.

    Read more →
  • Managed private cloud

    Managed private cloud

    Managed private cloud (also known as "hosted private cloud" or "single-tenant SaaS") refers to a principle in software architecture where a single instance of the software runs on a server, serves a single client organization (tenant), and is managed by a third party. The third-party provider is responsible for providing the hardware for the server and also for preliminary maintenance. This is in contrast to multitenancy, where multiple client organizations share a single server, or an on-premises deployment, where the client organization hosts its software instance. Managed private clouds also fall under the larger umbrella of cloud computing. == Adoption == The need for private clouds arose due to enterprises requiring a dedicated service and infrastructure for their cloud computing needs, such as for business-critical operations, improved security, and better control over their resources. Managed private cloud adoption is a popular choice among organizations. It has been on the rise due to enterprises requiring a dedicated cloud environment and preferring to avoid having to deal with management, maintenance, or future upgrade costs for the associated infrastructure and services. Such operational costs are unavoidable in on-premises private cloud data centers. == Advantages and challenges of managed private cloud == A managed private cloud cuts down on upkeep costs by outsourcing infrastructure management and maintenance to the managed cloud provider. It is easier to integrate an organization's existing software, services, and applications into a dedicated cloud hosting infrastructure which can be customized to the client's needs instead of a public cloud platform, whose hardware or infrastructure/software platform cannot be individualized to each client. Customers who choose a managed private cloud deployment usually choose them because of their desire for efficient cloud deployment, but also have the need for service customization or integration only available in a single-tenant environment. This chart shows the key benefits of the different types of deployments, and shows the overlap between these cloud solutions. This chart shows key drawbacks. Since deployments are done in a single-tenant environment, it is usually cost-prohibitive for small and medium-sized businesses. While server upkeep and maintenance are handled by the service provider, including network management and security, the client is charged for all such services. It is up to the potential client to determine if a managed private cloud solution aligns with their business objectives and budget. While the service provider maintains the upkeep of servers, network, and platform infrastructure, sensitive data is typically not stored on managed private clouds as it may leave business-critical information prone to breaches via third-party attacks on the cloud service provider. Common customizations and integrations include: Active Directory Single Sign-on Learning Management Systems Video Teleconferencing == Deployment strategies and service providers == Software companies have taken a variety of strategies in the Managed Private Cloud realm. Some software organizations have provided managed private cloud options internally, such as Microsoft. Companies that offer an on-premises deployment option, by definition, enable third-party companies to market Managed Private Cloud solutions. A few managed private cloud service providers are: Adobe Connect: Adobe Connect may be purchased for on-premises deployment, multi-tenant hosted deployment, managed private cloud as ACMS, or managed by third-party managed private cloud provider ConnectSolutions. Rackspace CenturyLink Microsoft licenses for Lync, SharePoint and Exchange may be purchased for on-premises deployment, a multi-tenant hosted deployment via Office 365, or managed by third-party cloud hosting from Azaleos, ConnectSolutions and others.

    Read more →
  • Corel Designer

    Corel Designer

    Corel DESIGNER is a vector-based graphics program. It was originally developed by Micrografx, which was bought by Corel in 2001. The last version developed by Micrografx was 9.0 in 2001. This program was later sold as Corel DESIGNER 9. There are still a number of users who continue working with version 9.0, because newer versions of the product are based on a modified CorelDRAW rather than the original product. Corel DESIGNER is effective for the creation of engineering drawings, but also offers many functions for graphic design. Starting with version X5, Corel DESIGNER Technical Suite includes Corel Designer, CorelDRAW and Corel Photo-Paint. X6 was the last release for Windows XP. == Release history and file formats ==

    Read more →
  • Eat App

    Eat App

    Eat App is a global restaurant technology company that provides a cloud-based management platform for restaurants, hotels, and other venues. The platform enables venues to accept online reservations seamlessly, manage tables, and enhance customer relationship management (CRM). It utilizes AI to improve operational efficiency, provides marketing automation, and helps build a comprehensive guestbook. The company also offers a consumer app and website for discovering and booking restaurant tables online. According to the company, the system has seated over 100 million guests, and the number continues to grow. Eat was founded by Nezar Kadhem and David Feuillard in 2015 and has raised $13M to date from Silicon Valley's 500 startups, Middle East Venture Partners (MEVP), Derayah VC, amongst other business angels. The company is currently operational across the world, with offices in Dubai and the United States. == Product overview == === For restaurants === Eat App’s reservation system allows for a digital record of all reservations, all guests that have previously visited the restaurant, as well as analytics on the performance of the restaurant. The table management feature simplifies traditional restaurant operations by providing a live snapshot of current status, seating optimization, and shift management. The CRM and analytics suite gathers and monitors data to build a segmented guestbook for personalized marketing and provides dashboards for data-driven decision-making. Additionally, the review feature makes it easy for restaurants to automatically collect reviews from their guests. Additionally, Eat App includes a chit printer function that seamlessly prints reservation details at host stands and a review management feature that allows restaurants to manage online reviews directly within the platform. == History == In February 2015, Eat App raised $300k from Bahrain-based business angel group TENMOU. In June 2018, Eat raised $1.2 million from Dubai-based Middle East Venture Partners (MEVP). In February 2020, Eat App raised $5 million in a Series B funding round led by 500 Startups, Derayah Venture Fund, and MEVP, with participation from a few angel investors and family members. In February 2021, Eat App launched its technology with The Emaar Hospitality Group, implementing it across over 50 restaurants in Emaar properties and hotels. The cloud-based system runs natively on iPads in each restaurant, providing Emaar staff access to reservations and guest information, and integrates with the U by Emaar loyalty app to personalize service. On September 28, 2022, Eat App announced the closing of an $11 million Series B funding round. The investment was led by Middle East Venture Partners (MEVP), 500 Startups, Derayah Venture Capital, Dallah Albaraka, Ali Zaid Al Quraishi & Brothers Company, and Rasameel Investment Company, with participation from existing investors.

    Read more →
  • Frameserver

    Frameserver

    A frameserver is any program that acts as a media source in the process called frameserving, which transfers digital video data from one computer program to another without intermediate files. The program that receives the data – the frameclient – could be any type of video application. The process is controlled by the frameclient: the frameclient requests audio/video frames and the frameserver serves them. The client can request frames in any order, allowing it to pause or jump to an arbitrary frame, just as a media player does with a file on disk. The client is most commonly a media encoder, a non-linear editing system, or a media player. == Frameservers == AviSynth VirtualDub VapourSynth Debugmode FrameServer

    Read more →
  • AI-complete

    AI-complete

    In the field of artificial intelligence (AI), tasks that are hypothesized to require artificial general intelligence to solve are informally known as AI-complete or AI-hard. Calling a problem AI-complete reflects the belief that it cannot be solved by a simple specific algorithm. Prior to 2013, problems supposed to be AI-complete included computer vision, natural language understanding, and dealing with unexpected circumstances while solving any real-world problem. AI-complete tasks were notably considered useful for distinguishing humans from automated agents, as CAPTCHAs aim to do. == History == The term was coined by Fanya Montalvo by analogy with NP-complete and NP-hard in complexity theory, which formally describes the most famous class of difficult problems. Early uses of the term are in Erik Mueller's 1987 PhD dissertation and in Eric Raymond's 1991 Jargon File. Expert systems, that were popular in the 1980s, were able to solve very simple and/or restricted versions of AI-complete problems, but never in their full generality. When AI researchers attempted to "scale up" their systems to handle more complicated, real-world situations, the programs tended to become excessively brittle without commonsense knowledge or a rudimentary understanding of the situation: they would fail as unexpected circumstances outside of its original problem context would begin to appear. When human beings are dealing with new situations in the world, they are helped by their awareness of the general context: they know what the things around them are, why they are there, what they are likely to do and so on. They can recognize unusual situations and adjust accordingly. Expert systems lacked this adaptability and were brittle when facing new situations. DeepMind published a work in May 2022 in which they trained a single model to do several things at the same time. The model, named Gato, can "play Atari, caption images, chat, stack blocks with a real robot arm and much more, deciding based on its context whether to output text, joint torques, button presses, or other tokens." Similarly, some tasks once considered to be AI-complete, like machine translation, are among the capabilities of large language models. == AI-complete problems == AI-complete problems have been hypothesized to include: AI peer review (composite natural language understanding, automated reasoning, automated theorem proving, formalized logic expert system) Bongard problems Computer vision (and subproblems such as object recognition) Natural language understanding (and subproblems such as text mining, machine translation, and word-sense disambiguation) Autonomous driving Dealing with unexpected circumstances while solving any real world problem, whether navigation, planning, or even the kind of reasoning done by expert systems. == Formalization == Computational complexity theory deals with the relative computational difficulty of computable functions. By definition, it does not cover problems whose solution is unknown or has not been characterized formally. Since many AI problems have no formalization yet, conventional complexity theory does not enable a formal definition of AI-completeness. == Research == Roman Yampolskiy suggests that a problem C {\displaystyle C} is AI-Complete if it has two properties: It is in the set of AI problems (Human Oracle-solvable). Any AI problem can be converted into C {\displaystyle C} by some polynomial time algorithm. On the other hand, a problem H {\displaystyle H} is AI-Hard if and only if there is an AI-Complete problem C {\displaystyle C} that is polynomial time Turing-reducible to H {\displaystyle H} . This also gives as a consequence the existence of AI-Easy problems, that are solvable in polynomial time by a deterministic Turing machine with an oracle for some problem. Yampolskiy has also hypothesized that the Turing Test is a defining feature of AI-completeness. Groppe and Jain classify problems which require artificial general intelligence to reach human-level machine performance as AI-complete, while only restricted versions of AI-complete problems can be solved by the current AI systems. For Šekrst, getting a polynomial solution to AI-complete problems would not necessarily be equal to solving the issue of artificial general intelligence, while emphasizing the lack of computational complexity research being the limiting factor towards achieving artificial general intelligence. For Kwee-Bintoro and Velez, solving AI-complete problems would have strong repercussions on society.

    Read more →
  • Act! LLC

    Act! LLC

    ACT! (previously known as Activity Control Technology, Automated Contact Tracking, ACT! by Sage, and Sage ACT!) is a customer relationship management and marketing automation software platform designed for small and medium-sized businesses. It has over 2.8 million registered users as of December 2014. == History == The company Conductor Software was founded in 1986, in Dallas, Texas, by Pat Sullivan and Mike Muhney. The original name for the software was Activity Control Technology; it was renamed to Automated Contact Tracking, later abbreviated to ACT. The name of the company was subsequently changed to Contact Software International and it was sold in 1993 to Symantec Corporation, who in 1999 then sold it to SalesLogix. The Sage Group purchased Interact Commerce (formerly SalesLogix) in 2001 through Best Software, then its North American software division. Swiftpage acquired it in 2013. Beginning with the 2006 version, the name was styled ACT! by Sage, and in 2010 revised to Sage ACT!. Following its 2013 acquisition by Swiftpage, it was renamed to ACT! Swiftpage. In May 2018, ACT! was sold to SFW Advisors. In December 2018, Kuvana, a marketing automation software solution, was acquired by SFW and merged with ACT! This add-on is now a complementary service to the core CRM solution. In December 2019, ACT! hired Steve Oriola as chairman and CEO. In 2020, Swiftpage changed its company name to ACT!. In March 2023, ACT! hired Bruce Reading as President and CEO. == Software == ACT! features include contact, company and opportunity management, a calendar, marketing automation and e-marketing tools, reports, interactive dashboards with graphical visualizations, and the ability to track prospective customers. ACT! integrates with Microsoft Word, Excel, Outlook, Google Contacts, Gmail, and other applications via Zapier. For custom integrations, ACT! has an in-built API. ACT! can be accessed from Windows desktops (Win7 and later) with local or network shared database; synchronized to laptops or remote officers; Citrix or Remote Desktop; Web browsers (Premium only) with self or SaaS hosting; smartphones and tablets via HTML5 Web (Premium only); smartphones and tablets via sync with Handheld Contact.

    Read more →
  • Pixel shift

    Pixel shift

    Pixel shift is a method in digital cameras for producing a super-resolution image. The method works by taking several images, after each such capture moving ("shifting") the sensor to a new position. In digital colour cameras that employ pixel shift, this avoids a major limitation inherent in using Bayer pattern for obtaining colour, and instead produces an image with increased colour resolution and, assuming a static subject or additional computational steps, an image free of colour moiré. Taking this idea further, sub-pixel shifting may increase the resolution of the final image beyond that suggested by the specified resolution of the image sensor. Additionally, assuming that the various individual captures are taken at the same sensitivity, the final combined image will have less image noise than a single capture. This can be thought of as an averaging effect (for instance, in a pixel shift image composed of four individual frames with a classic Bayer pattern, every pixel in the final colour image is based on two measurements of the green channel). == List of cameras implementing pixel shift == All of the following cameras are fabricated with one imaging sensor, thus any kind of pixel shift requires a movement of the whole sensor. === Canon === Canon R5: Contains a 45 Mpixel sensor. The High-Resolution Mode shifts the sensor by one pixel to obtain a sequence of nine images that are merged into a 400 Mpixel image. === Fujifilm === Fujifilm GFX50S II: contains a 51 Mpixel sensor. The Pixel Shift Multi-Shot mode shifts the imaging sensor by 0.5-pixel movements to obtain a sequence of 16 images that are subsequently merged into a 200 Mpixel image. Fujifilm GFX100, Fujifilm GFX100 II: contains a 102 Mpixel sensor. A sequence of 16 pixel shifted images are merged into a 400 Mpixel image. Fujifilm GFX100S, Fujifilm GFX100S II: contains a 102 Mpixel sensor. A sequence of 16 pixel shifted images are merged into a 400 Mpixel image Fujifilm GFX100IR: contains a 102 Mpixel sensor. A sequence of 16 pixel shifted images are merged into a 400 Mpixel image Fujifilm X-H2: contains a 40 Mpixel sensor. A sequence of 20 shifted images are merged into a 160 Mpixel image. Fujifilm X-T5: contains a 40 Mpixel sensor. A sequence of 20 shifted images are merged into a 160 Mpixel image. === Nikon === Nikon Z8: contains a 47.5 Mpixel sensor. The High Res shot mode shifts the imaging sensor by 0.5-pixel movements to obtain a sequence of up to 32 images that can be merged in Nikon's NX studio software. Nikon Zf: contains a 24 Mpixel sensor. The High Res shot mode shifts the imaging sensor by 0.5-pixel movements to obtain a sequence of up to 32 images that can be merged in Nikon's NX studio software. === Olympus === Olympus OM-D E-M1 Mark II: contains a 20.4 Mpixel sensor. The High Res shot mode produces a 50 Mpixel image. Olympus OM-D E-M5 Mark II: contains a 16 Mpixel sensor. The High Res shot mode shifts the imaging sensor by 0.5-pixel movements to obtain a sequence of 8 images that are subsequently merged into a 40 Mpixel image. Olympus OM-D E-M5 Mark III: contains a 20.4 Mpixel sensor. The High Res shot mode shifts the imaging sensor by 0.5-pixel movements to obtain a sequence of 8 images that are subsequently merged into a 50 Mpixel image. Olympus OM-D E-M1X: contains a 20.4 Mpixel sensor. The camera sports two pixel shift mode: (a) the 80Mp Tripod mode produces an 80 Mpixel image, (b) the Handheld High Res shot mode produces a 50 Mpixel image. Olympus PEN-F: contains a 20.4 Mpixel sensor. The High Res Shot mode takes multiple images, continually shifting the position of the sensor in sub-pixel increments. Combining these images results in either a 50MP JPEG or an 80MP Raw file. ==== OM System ==== OM System OM-1: contains a 20MPix sensor. The High Res Shot mode takes multiple images, and it can be used handheld or on a tripod. Handheld it will internally produce 50 Mpix files and 80 Mpix when mounted on a tripod. OM System OM-5: contains a 20MPix sensor. The High Res Shot mode takes multiple images, and it can be used handheld or on a tripod. Handheld it will internally produce 50 Mpix files and 80 Mpix when mounted on a tripod. === Panasonic === Panasonic Lumix DC-G9: contains a 20.3 Mpixel sensor. The High Resolution Mode takes a sequence of 8 shots in quick succession between which the sensor is shifted by 0.5 pixel for each image. These are subsequently merged into an 80 Mpixel image. Panasonic Lumix DC-S1: contains a 24.2 Mpixel sensor. The High Resolution Mode takes a sequence of shots in quick succession between which the sensor is shifted by a small amount. These are subsequently merged into a 96 Mpixel image. Panasonic Lumix DC-S1R: contains a 47.3 Mpixel sensor. The High Resolution Mode shifts the imaging sensor by a small increments to obtain a sequence of 8 images that are subsequently merged into a 187 Mpixel image. Panasonic Lumix DC-S1H Panasonic Lumix DC-S5 === Pentax === Pentax K-70: contains a 24.3 Mpixel sensor. The pixel shift mode takes a sequence of 4 shots between which the sensor is shifted by 1 pixel. These are subsequently merged into an image sporting 'all color data in each pixel to deliver super-high-resolution images'. Pentax KP: contains a 24.3 Mpixel sensor. The pixel shift mode takes a sequence of 4 shots between which the sensor is shifted by 1 pixel. These are subsequently merged into an image sporting 'high-resolution images with more accurate colours and much finer details'. Pentax K-3 II: contains a 24.3 Mpixel sensor. The pixel shift mode takes a sequence of 4 shots between which the sensor is shifted by 1 pixel. These are subsequently merged into an image sporting 'super-high-resolution images with far more truthful color reproduction and much finer details'. Pentax K-3 III: contains a 25.7 Mpixel sensor. The pixel shift mode takes a sequence of 4 shots between which the sensor is shifted by 1 pixel. These are subsequently merged into an image sporting 'a cancelling out of the Bayer pattern and removal of the need for sharpness-sapping demosaicing'. Pentax K-1: contains a 36.4 Mpixel sensor. The pixel shift mode takes a sequence of 4 shots between which the sensor is shifted by 1 pixel. These are subsequently merged into an image sporting 'improved detail and colour resolution'. Pentax K-1 II: contains a 36.4 Mpixel sensor. The camera sports two pixel shift mode: (a) a series of 4 tripod-stabilised images shifted by 1 pixel each are subsequently combined into a 47.3 Mpixel image, (b) a series of images taken in handheld mode are combined into a 47.3 Mpixel image that is, within limits, able to cope even with moving subjects. === Sony === Sony a6600: contains a 24.3 Mpixel sensor. The pixel shift mode takes a sequence of 4 shots between which the sensor is shifted by 1 pixel. These are subsequently merged into an image sporting 'all color data in each pixel to deliver super-high-resolution images'. Sony α7R III: contains a 42.4 Mpixel sensor. The pixel shift mode takes a sequence of 4 shots between which the sensor is shifted by 1 pixel. These are subsequently merged into a 42.4 Mpixel image with improved tonal resolution. Sony α7R IV: contains a 61 Mpixel sensor. The camera has two pixel shift modes, (a) the first takes a sequence of 4 shots between which the sensor is shifted by 1 pixel. These are subsequently merged into a 61 Mpixel image with improved tonal resolution, (b) the other takes a sequence of 16 shots between which the sensor is shifted by 0.5 pixel. These are subsequently merged into a 240 Mpixel image with both enhanced detail and improved tonal resolution. Sony α1: contains a 50 Mpixel sensor. The camera has two pixel shift modes, (a) the first takes a sequence of 4 shots between which the sensor is shifted by 1 pixel. These are subsequently merged into a 50 Mpixel image with improved tonal resolution, (b) the other takes a sequence of 16 shots between which the sensor is shifted by 0.5 pixel. These are subsequently merged into a 200 Mpixel image with both enhanced detail and improved tonal resolution. === Hasselblad === Hasselblad H3DII: the model H3DII-39 sports a 39 Mpixel sensor, the model H3DII-50 a 50 Mpixel sensor. Both enable a pixel shift mode which takes a sequence of 4 shots between which the sensor is shifted by 1 pixel. These are subsequently merged into a single image. Hasselblad H4D series: the model H4D-200MS contains a 50 Mpixel sensor. The sensor sports 3 different pixel shift modes which take (a) a sequence of 6 shots taken at slight offsets, (b) a sequence of 4 shots between which the sensor is shifted by 1 pixel, (c) a sequence of 4 shots between which the sensor is shifted by 0.5 pixels. Images obtained by all three modes are subsequently merged into 200 Mpixel images. Hasselblad H5D series: both models H5D-50c MS and H5D-200c MS contain a 50 Mpixel sensor. This sensor sports 2 different pixel shift modes which take (a) a sequence of 6 shots with full and half pixel moveme

    Read more →
  • Cyborg

    Cyborg

    A cyborg () is a being with both organic and biomechatronic body parts. It is a portmanteau of cybernetic and organism. The term was coined in 1960 by Manfred Clynes and Nathan S. Kline. In contrast to biorobots and androids, the term cyborg applies to a living organism that has undergone restoration of function or enhancements of abilities due to the integration of some artificial component or technology that relies on feedback. == Description and definition == Alternative names for a cyborg include cybernetic organism, cyber-organism, cyber-organic being, cybernetically enhanced organism, cybernetically augmented organism, technorganic being, techno-organic being, and techno-organism. Unlike bionics, biorobotics, or androids, a cyborg is an organism that has restored function or, especially, enhanced abilities due to the integration of some artificial component or technology that relies on some sort of feedback, for example: prostheses, artificial organs, implants or, in some cases, wearable technology. Cyborg technologies may enable or support collective intelligence. A related idea is the "augmented human". While cyborgs are commonly thought of as mammals, including humans, the term can apply to any organism. === Placement and distinctions === D. S. Halacy's Cyborg: Evolution of the Superman (1965) featured an introduction which spoke of a "new frontier" that was "not merely space, but more profoundly the relationship between 'inner space' to 'outer space' – a bridge...between mind and matter." In "A Cyborg Manifesto", Donna Haraway rejects the notion of rigid boundaries between humanity and technology, arguing that, as humans depend on more technology over time, humanity and technology have become too interwoven to draw lines between them. She believes that since we have allowed and created machines and technology to be so advanced, there should be no reason to fear what we have created, and cyborgs should be embraced because they are part of human identities. However, Haraway has also expressed concern over the contradictions of scientific objectivity and the ethics of technological evolution, and has argued that "There are political consequences to scientific accounts of the world." === Biosocial definition === According to some definitions of the term, the physical attachments that humans have with even the most basic technologies have already made them cyborgs. In a typical example, a human with an artificial cardiac pacemaker or implantable cardioverter-defibrillator would be considered a cyborg, since these devices measure voltage potentials in the body, perform signal processing, and can deliver electrical stimuli, using a synthetic feedback mechanism to keep that person alive. Implants, especially cochlear implants, that combine mechanical modification with any kind of feedback response are also cybernetic enhancements. Some theorists cite such modifications as contact lenses, hearing aids, smartphones, or intraocular lenses as examples of fitting humans with technology to enhance their biological capabilities. The emerging trend of implanting microchips inside the body (mainly the hands), to make financial operations like a contactless payment, or basic tasks like opening a door, has been erroneously marketed as more recent examples of cybernetic enhancement. The latter has not yet seen significant traction outside niche areas in Scandinavia and in actual function is little more than a pre-programmed Radio-frequency identification (RFID) microchip encased in glass that does not interact with the human body (it is the same technology used in the microchips injected into animals for ease of identification), thus not fitting the definition of a cybernetic implant. As cyborgs currently are on the rise, some theorists argue there is a need to develop new definitions of aging. For instance, a bio-techno-social definition of aging has been suggested. The term is also used to address human-technology mixtures in the abstract. This includes not only commonly used pieces of technology such as phones, computers, the Internet, and so on, but also artifacts that are not usually considered technology; for example, pen and paper, and speech and language. When augmented with these technologies and connected in communication with people in other times and places, a person becomes capable of more than they were before. An example is a computer, which gains power by using Internet protocols to connect with other computers. Another example is a social-media bot—either a bot-assisted human or a human-assisted-bot—used to target social media with likes and shares. Cybernetic technologies thus include highways, pipes, electrical wiring, buildings, electrical plants, libraries, and other infrastructural constructs. Bruce Sterling, in his Shaper/Mechanist universe, suggested an idea of an alternative cyborg called 'Lobster', which is made not by using internal implants, but by using an external shell (e.g. a powered exoskeleton). The computer game Deus Ex: Invisible War prominently features cyborgs called Omar, Russian for 'lobster'. === Evolutionary perspective === In 1994, Hans Hass formulated a scientific view of the human-machine hybrids he called "hypercells". They can expand their biological cell body with artificial artifacts and thus expand their performance body. The theory of hypercells or Homo proteus, as Hass called the human-machine hybrid to distinguish Homo sapiens, extends Charles Darwin's theory of evolution and deals with the course of evolution beyond humans. In his 2019 book Novacene, James Lovelock used the term "cyborgs" to refer to the next generation of beings who will become the "understanders of the future" and "lead the cosmos to self-knowledge". While acknowledging the organic component in Clynes' and Kline's definition, he proposed that these cyborgs "will have designed and built themselves from the artificial intelligence systems we have already constructed", and used the term cyborg "to emphasize that the new intelligent beings will have arisen, like us, from Darwinian evolution." == Origins == The concept of a man-machine mixture was widespread in science fiction before World War II. As early as 1843, Edgar Allan Poe described a man with extensive prostheses in the short story "The Man That Was Used Up". In 1911, Jean de La Hire introduced the Nyctalope, a science fiction hero who was perhaps the first literary cyborg, in Le Mystère des XV (later translated as The Nyctalope on Mars). Nearly two decades later, Edmond Hamilton presented space explorers with a mixture of organic and machine parts in his 1928 novel The Comet Doom. He later featured the talking, living brain of an old scientist, Simon Wright, floating in a transparent case, and in all the adventures of his famous hero, Captain Future. In 1944, in the short story "No Woman Born", C. L. Moore wrote of Deirdre, a dancer, whose body was burned completely and whose brain was placed in a faceless but beautiful and supple mechanical body. In 1960, the term "cyborg" was coined by Manfred E. Clynes and Nathan S. Kline to refer to their conception of an enhanced human being who could survive in extraterrestrial environments: For the exogenously extended organizational complex functioning as an integrated homeostatic system unconsciously, we propose the term 'Cyborg'. Their concept was the outcome of thinking about the need for an intimate relationship between human and machine as the new frontier of space exploration was beginning to develop. A designer of physiological instrumentation and electronic data-processing systems, Clynes was the chief research scientist in the Dynamic Simulation Laboratory at Rockland State Hospital in New York. The term first appears in print 5 months earlier when The New York Times reported on the "Psychophysiological Aspects of Space Flight Symposium" where Clynes and Kline first presented their paper: A cyborg is essentially a man-machine system in which the control mechanisms of the human portion are modified externally by drugs or regulatory devices so that the being can live in an environment different from the normal one. Thereafter, Hamilton would first use the term "cyborg" explicitly in the 1962 short story, "After a Judgment Day", to describe the "mechanical analogs" called "Charlies," explaining that "[c]yborgs, they had been called from the first one in the 1960s...cybernetic organisms." The 1972 novel Cyborg by Martin Caidin introduced the character of bionic government agent Steve Austin, and was adapted into the popular television series The Six Million Dollar Man, which ran from 1973 to 1978. In 2001, a book titled Cyborg: Digital Destiny and Human Possibility in the Age of the Wearable computer was published by Doubleday. Some of the ideas in the book were incorporated into the documentary film Cyberman that same year. == Cyborg tissues in engineering == Cyborg tissues structured with carbon nanotubes and plan

    Read more →
  • Randonautica

    Randonautica

    Randonautica (a portmanteau of "random" + "nautica") is an app launched on February 22, 2020 founded by Auburn Salcedo and Joshua Lengfelder. It randomly generates coordinates that encourages the user to explore their local area and report what is found. According to its creators, the app is "an attractor of strange things," letting one choose specific coordinates based on a specific theme. It gained controversy after a report of two teenagers coincidentally finding a corpse while using the application. == Overview == The app, which creators claim to be inspired by chaos theory and Guy Debord's Theory of the Dérive, offers its users three types of coordinates to choose from: an attractor, a void, or an anomaly. The app has a cult following on YouTube and TikTok and there is a subreddit made by the creators for users of the app. == History == 29-year-old circus performer Joshua Lengfelder discovered a bot called Fatum Project in a fringe science chat group on Telegram in January 2019. According to The New York Times, "He absorbed the project’s theories about how random exploration could break people out of their predetermined realities, and how people could influence random outcomes with their minds." Lengfelder then created a Telegram bot using Fatum Project's code, generating coordinates. He then created the subreddit r/randonauts in March. In October, developer Simon Nishi McCorkindale made the bot's webpage. With the help of Auburn Salcedo, chief executive of a TV agency, both created Randonauts LLC. Salcedo became the chief operating officer while Lengfelder was the CEO. The app, called Randonautica, was launched on February 22, 2020. Later the same year the app and back-end got completely overhauled by a new team of developers and got a more visual and friendlier design and logo. In April 2022 Lengfelder exited Randonauts LLC and Auburn Salcedo became CEO. == Reception == The app has as many as 10.8 million users as of July 2020, gaining popularity amid the COVID-19 pandemic in the United States as restrictions have been lightened. Emma Chamberlain made a YouTube video about the app that helped increase its following. i-D reported that the hashtag #randonautica has gained 176.5 million views on TikTok, although it has not marketed itself yet. === Controversy === With the app's popularity, users started reporting coincidences which many find unsettling. The majority of reports were from TikTok and Reddit, as well as Telegram. The most notable controversy involved a group of people heading to a beach in Duwamish Head, Puget Sound, West Seattle per the app, where they found a bag with two dead bodies, a 27-year-old male and a 36-year-old female, as reported by the Seattle Police homicide detectives. In August 2020, police arrested and charged their landlord, Michael Lee Dudley, in connection with the murders. In March 2021, Dudley was denied bail while other people were under suspicion of aiding Dudley in the dismemberment and disposal of the bodies, but no one else had been charged. This has caused speculation that the app has an intended, puzzle-like theme. However, Lengfelder stated that it is "a shocking coincidence." Salcedo called the videos fake, and that "It’s so hard to manage, because people are really taking creative liberties after seeing how much traction the app is getting in that fear factor." In 2022, Michael Dudley was convicted of second degree murder for killing both victims, who were identified as Jessica Lewis and Austin Wenner. He was sentenced to 46 years in prison the following year. In their questions page, Randonautica's creators have said that if the app generates coordinates inside a private property, it is a violation of their terms and conditions to trespass. In addition, Randonautica has also received allegations that the app is used for human trafficking, which its creators have denied, saying that data collected by the app are anonymous. It also ensured that the app is not designed to violate religious customs, saying that "the app is simply a tool. Just as a knife can be used either to prepare dinner or to cut somebody."

    Read more →
  • ArcSoft ShowBiz

    ArcSoft ShowBiz

    ShowBiz is a video editor by ArcSoft for the Windows operating system. It can create VCD and DVDs and can also export to the formats AVI, MPEG, WMV, and MOV. ShowBiz also contains a DVD burning and menu building feature. As of 2003, it was one of the three most dominant bundled titles. == Reception == PC Magazine reviewer Jan Ozer states: "ArcSoft's ShowBiz has evolved into a competent editor that's generally more usable than Dazzle's MovieStar program, providing more configuration controls, better preview features, and a much greater range of fun effects." John Virata, senior editor of Digital Media Online, says in his three page review of ShowBiz DVD 2, "It is an easy editor to work with and has a logically laid out interface that takes you step by step through the video creation and DVD creation process"

    Read more →
  • Audio-visual speech recognition

    Audio-visual speech recognition

    Audio visual speech recognition (AVSR) is a technique that uses image processing capabilities in lip reading to aid speech recognition systems in recognizing indeterministic phones or giving preponderance among near probability decisions. Each system of lip reading and speech recognition works separately, then their results are mixed at the stage of feature fusion. As the name suggests, it has two parts. First one is the audio part and second one is the visual part. In audio part we use features like log mel spectrogram, mfcc etc. from the raw audio samples and we build a model to get feature vector out of it . For visual part generally we use some variant of convolutional neural network to compress the image to a feature vector after that we concatenate these two vectors (audio and visual ) and try to predict the target object.

    Read more →