AI Avatar Background

AI Avatar Background — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

TinyML

TinyML (short for tiny machine learning) is an area of machine learning that focuses on deploying and running models on low-power, resource-constrained embedded systems such as microcontrollers and edge devices. TinyML supports on-device inference with low latency and minimal reliance on cloud connectivity, which makes it suitable for applications in the Internet of Things (IoT), wearable devices, and real-time systems. == History == The idea of running machine learning models on embedded systems has gained traction in the late 2010s, as model compression, quantization, and efficient neural network architectures progressed. The term TinyML was popularized in 2019 with the publication of the book TinyML by Pete Warden and Daniel Situnayake and the creation of the TinyML Foundation.
Read more →
Macroelectronics

Macroelectronics are flexible electronics that cover a large area. The most visible example of macroelectronics is flat-panel displays. Other emerging applications include rollable display, printable thin film solar cell and electronic skin. Flat-panel displays fabricated on glass substrates are fragile so fabricating directly on flexible substrates, such as polymers is being explored. Displays made on thin polymer substrates can be more rugged than glass. In September 2005, Philips Polymer Vision revealed the world's first prototype of a rollable electronic reader, which can unfold to a 5-inch display and roll back into a pocket-size (100×60×20 mm) device. Thin-film devices on flexible polymer substrates can lend themselves to low-cost fabrication processes (i.e., roll-to-roll printing), resulting in lightweight, rugged and flexible macroelectronic products.
Read more →
Common-mode signal

In electrical engineering, a common-mode signal is the identical component of voltage present at both input terminals of an electrical device. In telecommunication, the common-mode signal on a transmission line is also known as longitudinal voltage. Common-mode interference (CMI) is a type of common-mode signal. Common-mode interference is interference that appears on both signal leads, or coherent interference that affects two or more elements of a network. In most electrical circuits, desired signals are transferred by a differential voltage between two conductors. If the voltages on these conductors are U1 and U2, the common-mode signal is the average of the voltages: U cm = U 1 + U 2 2 {\displaystyle U_{\text{cm}}={\frac {U_{1}+U_{2}}{2}}} When referenced to the local common or ground, a common-mode signal appears on both lines of a two-wire cable, in phase and with equal amplitudes. Technically, a common-mode voltage is one-half the vector sum of the voltages from each conductor of a balanced circuit to local ground or common. Such signals can arise from one or more of the following sources: Radiated signals coupled equally to both lines, An offset from signal common created in the driver circuit, or A ground differential between the transmitting and receiving locations. Noise induced into a cable, or transmitted from a cable, usually occurs in the common mode, as the same signal tends to be picked up by both conductors in a two-wire cable. Likewise, RF noise transmitted from a cable tends to emanate from both conductors. Elimination of common-mode signals on cables entering or leaving electronic equipment is important to ensure electromagnetic compatibility. Unless the intention is to transmit or receive radio signals, an electronic designer generally designs electronic circuits to minimise or eliminate common-mode effects. == Methods of eliminating common-mode signals == Differential amplifiers or receivers that respond only to voltage differences, e.g. those between the wires that constitute a pair. This method is particularly suited for instrumentation where signals are transmitted through DC bias. For sensors with very high output impedance that require very high common-mode rejection ratio, a differential amplifier is combined with input buffers to form an instrumentation amplifier. An inductor where a pair of signaling wires follow the same path through the inductor, e.g. in a bifilar winding configuration such as used in Ethernet magnetics. Useful for AC and DC signals, but will filter only higher frequency common-mode signals. A transformer, which is useful for AC signals only, and will filter any form of common-mode noise, but may be used in combination with a bifilar wound coil to eliminate capacitive coupling of higher frequency common-mode signals across the transformer. Used in twisted pair Ethernet. Common-mode filtering may also be used to prevent egress of noise for electromagnetic compatibility purposes: High frequency common-mode signals (e.g., RF noise from a computing circuit) may be blocked using a ferrite bead clamped to the outside of a cable. These are often observable on laptop computer power supplies near the jack socket, and good quality mouse or printer USB cables and HDMI cables. Switch mode power supplies include common and differential mode filtering inductors to block the switching signal noise returning into mains wiring. Common-mode rejection ratio is a measure of how well a circuit eliminates common-mode interference.
Read more →
Digital cassettes

Digital audio cassette formats introduced to the professional audio and consumer markets: Digital Audio Tape (or DAT) is the most well-known, and had some success as an audio storage format among professionals and "prosumers" before the prices of hard drive and solid-state flash memory-based digital recording devices dropped in the late 1990s. Hard-drive recording has mostly made DAT obsolete, as hard disk recorders offer more editing versatility than tape, and easier importation into digital audio workstations (DAWs) and non-linear video editing (NLE) systems. Digital Compact Cassette was intended as a digital replacement for the mass-market analog cassette tape, but received very little attention or adaptation. Its failure is generally attributed to higher production costs than audio CDs, durability and indifferent reception by consumers. Digital video cassettes include: Betacam IMX (Sony) D-VHS (JVC) D1 (Sony) D2 (Sony) D3 D5 HD Digital-S D9 (JVC) Digital Betacam (Sony) Digital8 (Sony) DV HDV ProHD (JVC) MiniDV MicroMV == Analog cassettes used as digital data storage == Historically, the compact audio cassette which was originally designed for analog storage of music was used as an alternative to disk drives in the late 1970s and early 1980s to provide data storage for home computers. There is a number of unique and incompatible cassette tape data storage formats that all use the same analog compact audio cassette tape media. The ADAT system uses Super VHS tapes to record 8 synchronized digital audiotracks at once. There have also been several audio recording systems that used VHS video recorders as storage devices and video tape transports, generally by encoding the digital data to be recorded into an analog composite video signal (which resembles static) and then recording this to magnetic tape. These systems were often used as "mixdown" recorders, to record the finished mix from a multi-track recorder in preparation for the manufacture of a vinyl record, cassette tape, or CD. An example was the Dbx Model 700. Another example is the Sony PCM adaptor series. Several companies sold VHS backup solutions in the 1980s and 1990s where data was converted to a video image which was then saved onto a VHS tape. the Corvus "Mirror" ( U.S. patent 4380047A ) the Metrum Model 64 on S-VHS tape, the Danmere Backer tape backup system, the Alpha Microsystems Videotrax the Legacy Storage Systems International VAST (Variable Array Storage) the ArVid the Video Backup System Amiga, The S2 VLBI system at three NASA Deep Space Network complexes and over 20 other radio telescopes stores digital data on SVHS tapes.
Read more →
Confusion network

A confusion network (sometimes called a word confusion network or informally known as a sausage) is a natural language processing method that combines outputs from multiple automatic speech recognition or machine translation systems. Confusion networks are simple linear directed acyclic graphs with the property that each a path from the start node to the end node goes through all the other nodes. The set of words represented by edges between two nodes is called a confusion set. In machine translation, the defining characteristic of confusion networks is that they allow multiple ambiguous inputs, deferring committal translation decisions until later stages of processing. This approach is used in the open source machine translation software Moses and the proprietary translation API in IBM Bluemix Watson.
Read more →
Flat-panel display

A flat-panel display (FPD) is an electronic display used to display visual content such as text or images. It is present in consumer, medical, transportation, and industrial equipment. Flat-panel displays are thin, lightweight, provide better linearity and are capable of higher resolution and contrast than typical consumer-grade TVs from earlier eras. They are usually less than 10 centimetres (3.9 in) thick. While the highest resolution for consumer-grade CRT televisions is 1080i, many interactive flat panels in the 2020s are capable of 1080p and 4K resolution. In the 2010s, portable consumer electronics such as laptops, mobile phones, and portable cameras have used flat-panel displays since they consume less power and are lightweight. As of 2016, flat-panel displays have almost completely replaced CRT displays. Most 2010s-era flat-panel displays use LCD or light-emitting diode (LED) technologies, sometimes combined. Most LCD screens are back-lit with color filters used to display colors. In many cases, flat-panel displays are combined with touch screen technology, which allows the user to interact with the display in a natural manner. For example, modern smartphone displays often use OLED panels, with capacitive touch screens. Flat-panel displays can be divided into two display device categories: volatile and static. The former requires that pixels be periodically electronically refreshed to retain their state (e.g. liquid-crystal displays (LCD)), and can only show an image when it has power. On the other hand, static flat-panel displays rely on materials whose color states are bistable, such as displays that make use of e-ink technology, and as such retain content even when power is removed. == History == The first engineering proposal for a flat-panel TV was by General Electric in 1954 as a result of its work on radar monitors. The publication of their findings gave all the basics of future flat-panel TVs and monitors. But GE did not continue with the R&D required and never built a working flat panel at that time. The first production flat-panel display was the Aiken tube, developed in the early 1950s and produced in limited numbers in 1958. This saw some use in military systems as a heads up display and as an oscilloscope monitor, but conventional technologies overtook its development. Attempts to commercialize the system for home television use ran into continued problems and the system was never released commercially. Dennis Gabor, better known as the inventor of holography, patented a flat-screen CRT in 1958. This was substantially similar to Aiken's concept, and led to a years-long patent battle. By the time the lawsuits were complete, with Aiken's patent applying in the US and Gabor's in the UK, the commercial aspects had long lapsed, and the two became friends. Around this time, Clive Sinclair came across Gabor's work and began an ultimately unsuccessful decade-long effort to commercialize it. The Philco Predicta featured a relatively flat (for its day) cathode-ray tube setup and would be the first commercially released "flat panel" upon its launch in 1958; the Predicta was a commercial failure. The plasma display panel was invented in 1964 at the University of Illinois, according to The History of Plasma Display Panels. === Liquid-crystal displays (LC displays, or LCDs) === The MOSFET (metal–oxide–semiconductor field-effect transistor, or MOS transistor) was invented by Mohamed M. Atalla and Dawon Kahng at Bell Labs in 1959, and presented in 1960. Building on their work, Paul K. Weimer at RCA developed the thin-film transistor (TFT) in 1962. It was a type of MOSFET distinct from the standard bulk MOSFET. The idea of a TFT-based LCD was conceived by Bernard J. Lechner of RCA Laboratories in 1968. B.J. Lechner, F.J. Marlowe, E.O. Nester and J. Tults demonstrated the concept in 1968 with a dynamic scattering LCD that used standard discrete MOSFETs. The first active-matrix addressed electroluminescent display was made using TFTs by T. Peter Brody's Thin-Film Devices department at Westinghouse Electric Corporation in 1968. In 1973, Brody, J. A. Asars and G. D. Dixon at Westinghouse Research Laboratories demonstrated the first thin-film-transistor liquid-crystal display. Brody and Fang-Chen Luo demonstrated the first flat active-matrix liquid-crystal display (AM LCD) using TFTs in 1974. By 1982, pocket LCD TVs based on LCD technology were developed in Japan. The 2.1-inch Epson ET-10 Epson Elf was the first color LCD pocket TV, released in 1984. In 1988, a Sharp research team led by engineer T. Nagayasu demonstrated a 14-inch full-color LCD, which convinced the electronics industry that LCD would eventually replace CRTs as the standard television display technology. As of 2013, all modern high-resolution and high-quality electronic visual display devices use TFT-based active-matrix displays. === LED displays === The first usable LED display was developed by Hewlett-Packard (HP) and introduced in 1968. It was the result of research and development (R&D) on practical LED technology between 1962 and 1968, by a research team under Howard C. Borden, Gerald P. Pighini, and Mohamed M. Atalla, at HP Associates and HP Labs. In February 1969, they introduced the HP Model 5082-7000 Numeric Indicator. It was the first alphanumeric LED display, and was a revolution in digital display technology, replacing the Nixie tube for numeric displays and becoming the basis for later LED displays. In 1977, James P Mitchell prototyped and later demonstrated what was perhaps the earliest monochromatic flat-panel LED television display. Ching W. Tang and Steven Van Slyke at Eastman Kodak built the first practical organic LED (OLED) device in 1987. In 2003, Hynix produced an organic EL driver capable of lighting in 4,096 colors. In 2004, the Sony Qualia 005 was the first LED-backlit LCD. The Sony XEL-1, released in 2007, was the first OLED television. == Common types == === Liquid-crystal display (LCD) === Field-effect LCDs are lightweight, compact, portable, cheap, more reliable, and easier on the eyes than CRT screens. LCD screens use a thin layer of liquid crystal, a liquid that exhibits crystalline properties. It is sandwiched between two glass plates carrying transparent electrodes. Two polarizing films are placed at each side of the LCD. By generating a controlled electric field between electrodes, various segments or pixels of the liquid crystal can be activated, causing changes in their polarizing properties. These polarizing properties depend on the alignment of the liquid-crystal layer and the specific field-effect used, being either twisted nematic (TN), in-plane switching (IPS) or vertical alignment (VA). Color is produced by applying appropriate color filters (red, green and blue) to the individual subpixels. LC displays are used in various electronics like watches, calculators, mobile phones, TVs, computer monitors and laptops screens etc. === LED-LCD === Most earlier large LCD screens were back-lit using a number of CCFL (cold-cathode fluorescent lamps). However, small pocket size devices almost always used LEDs as their illumination source. With the improvement of LEDs, almost all new displays are now equipped with LED backlight technology. The image is still generated by the LCD layer. === Plasma panel === A plasma display consists of two glass plates separated by a thin gap filled with a gas such as neon. Each of these plates has several parallel electrodes running across it. The electrodes on the two plates are at right angles to each other. A voltage applied between the two electrodes one on each plate causes a small segment of gas at the two electrodes to glow. The glow of gas segments is maintained by a lower voltage that is continuously applied to all electrodes. By 2010, consumer plasma displays had been discontinued by numerous manufacturers. === Electroluminescent panel === In an electroluminescent display, the image is created by applying electrical signals to the plates which make the phosphor glow. === Organic light-emitting diode === An OLED (organic light-emitting diode) is a light-emitting diode (LED) in which the emissive electroluminescent layer is a film of organic compound which emits light in response to an electric current. This layer of organic semiconductor is situated between two electrodes; typically, at least one of these electrodes is transparent. OLEDs are used to create digital displays in devices such as television screens, computer monitors, portable systems such as mobile phones, handheld game consoles and PDAs. === Quantum-dot light-emitting diode === QLED or quantum dot LED is a flat panel display technology introduced by Samsung under this trademark. Other television set manufacturers such as Sony have used the same technology to enhance the backlighting of LCD TVs already in 2013. Quantum dots create their own unique light when illuminated by a light source of shorter wavelength such as blue LEDs. Th
Read more →
MADI

Multichannel Audio Digital Interface (MADI) standardized as AES10 by the Audio Engineering Society (AES) defines the data format and electrical characteristics of an interface that carries multiple channels of digital audio. The AES first documented the MADI standard in AES10-1991 and updated it in AES10-2003 and AES10-2008. The MADI standard includes a bit-level description and has features in common with the two-channel AES3 interface. MADI supports serial digital transmission over coaxial cable or fibre-optic lines of 28, 56, 32, or 64 channels; and sampling rates to 96 kHz and beyond with an audio bit depth of up to 24 bits per channel. Like AES3 and ADAT Lightpipe, it is a unidirectional interface from one sender to one receiver. == Development and applications == MADI was developed by AMS Neve, Solid State Logic, Sony and Mitsubishi and is widely used in the audio industry, especially in the professional audio sector. It provides advantages over other audio digital interface protocols and standards such as AES3, ADAT Lightpipe, TDIF (Tascam Digital Interface), and S/PDIF (Sony/Philips Digital Interface). These advantages include: Support for a greater number of channels per line Use of coaxial and optical fiber media that support transmission of audio signals over 100 meters, up to 3000 meters over multi-mode and 40,000 meters over single-mode optical fiber The original specification (AES10-1991) defined the MADI link as a 56-channel transport for linking large-format mixing consoles to digital multitrack recording devices. Large broadcast studios also adopted it for routing multi-channel audio throughout their facilities. The 2003 revision (AES10-2003) adds a 64-channel capability by removing varispeed operation and supports 96 kHz sampling frequency with reduced channel capacity. The latest AES10-2008 standard includes minor clarifications and updates to correspond to the current AES3 standard. Audio over Ethernet of various types is the primary alternative to MADI for transport of many channels of professional digital audio. == Transmission format == MADI links use a transmission format similar to Fiber Distributed Data Interface (FDDI) networking. Since MADI is most often transmitted on copper links via 75-ohm coaxial cables, it more closely compares to the FDDI specification for copper-based links, called CDDI. AES10-2003 recommends using BNC connectors with coaxial cables and SC connectors with optic fibers. MADI over fibre can support a range of up to 2 km. The basic data rate is 100 Mbit/s of data using 4B5B encoding to produce a 125 MHz physical baud rate. Unlike AES3, this clock is not synchronized to the audio sample rate, and the audio data payload is padded using JK sync symbols. Sync symbols may be inserted at any subframe boundary, and must occur at least once per frame. Though the standard disassociates the transmission clock from the audio sample rate, and thus requires a separate word clock connection to maintain synchronization, some vendors do give the option of locking to parts of the transmission timing information for purposes of deriving a word clock. The audio data is almost identical to the AES3 payload, though with more channels. Rather than letters, MADI assigns channel numbers from 0–63. Frame synchronization is provided by sync symbols outside the data itself, rather than an embedded preamble sequence, and the first four time slots of each sub-channel are encoded as normal data, used for sub-channel identification: Bit 0: Set to 1 to mark channel 0, the first channel in each frame Bit 1: Set to 1 to indicate that this channel is active (contains interesting data) Bit 2: notA/B channel marker, used to mark left (0) and right (1) channels. Generally, even channels are A and odd channels are B. Bit 3: Set to 1 to mark the beginning of a 192-sample data block == Sampling frequency == The original AES10-1991 specification allowed 56 channels at sample rates from 32 to 48 kHz with an additional vari-speed range of ± 12.5%. This leads to a total range of 28 to 54 kHz. At the highest frequency, this produces a total of 56 × 32 × 54 = 96768 kbit/s, leaving 3.232% of the channel for synchronization marks and transmit clock error. The 2003 revision specifies different relations between sampling frequency and number of channels. 32 kHz to 48 kHz ± 12.5%, 56 channels; 32 kHz to 48 kHz nominal, 64 channels; 64 kHz to 96 kHz ± 12.5%, 28 channels. With a 48 kHz sampling frequency, 64 channels take 64 × 32 × 48000 = 98.304 Mbit/s. Adding the minimum 8 × 58 kbit/s of framing produces 98688 bit/s, leaving 1.312% free for timing variation and other overhead. Both versions of the standard accommodate higher sampling frequencies (for example, 96 kHz or 192 kHz) by using two or more channels per audio sample on the link.
Read more →
Microformat

Microformats (μF) are predefined HTML markup (like HTML classes) created to serve as descriptive and consistent metadata about elements, designating them as representing a certain type of data (such as contact information, geographic coordinates, events, products, recipes, etc.). They allow software to process the information reliably by having set classes refer to a specific type of data rather than being arbitrary. Microformats emerged around 2005 and were predominantly designed for use by search engines, web syndication and aggregators such as RSS. Google confirmed in 2020 that it still parses microformats for use in content indexing. Microformats are referenced in several W3C social web specifications, including IndieAuth and Webmention. Although the content of web pages has been capable of some "automated processing" since the inception of the web, such processing is difficult because the markup elements used to display information on the web do not describe what the information means. Microformats can bridge this gap by attaching semantics, and thereby obviating other, more complicated, methods of automated processing, such as natural language processing or screen scraping. The use, adoption and processing of microformats enables data items to be indexed, searched for, saved or cross-referenced, so that information can be reused or combined. As of 2013, microformats allow the encoding and extraction of event details, contact information, social relationships and similar information. Microformats2, abbreviated as mf2, is the updated version of microformats. Mf2 provides an easier way of interpreting HTML structured syntax and vocabularies than the earlier ways that made use of RDFa and microdata. == Background == Microformats emerged around 2005 as part of a grassroots movement to make recognizable data items (such as events, contact details or geographical locations) capable of automated processing by software, as well as directly readable by end-users. Link-based microformats emerged first. These include vote links that express opinions of the linked page, which search engines can tally into instant polls. CommerceNet, a nonprofit organization that promotes e-commerce on the Internet, has helped sponsor and promote the technology and support the microformats community in various ways. CommerceNet also helped co-found the Microformats.org community site. Neither CommerceNet nor Microformats.org operates as a standards body. The microformats community functions through an open wiki, a mailing list, and an Internet relay chat (IRC) channel. Most of the existing microformats originated at the Microformats.org wiki and the associated mailing list by a process of gathering examples of web-publishing behaviour, then codifying it. Some other microformats (such as rel=nofollow and unAPI) have been proposed, or developed, elsewhere. == Technical overview == XHTML and HTML standards allow for the embedding and encoding of semantics within the attributes of markup elements. Microformats take advantage of these standards by indicating the presence of metadata using the following attributes: class Classname rel relationship, description of the target address in an anchor-element (...) rev reverse relationship, description of the referenced document (in one case, otherwise deprecated in microformats) For example, in the text "The birds roosted at 52.48, -1.89" is a pair of numbers which may be understood, from their context, to be a set of geographic coordinates. With wrapping in spans (or other HTML elements) with specific class names (in this case geo, latitude and longitude, all part of the geo microformat specification): Software agents can recognize exactly what each value represents and can then perform a variety of tasks such as indexing, locating it on a map and exporting it to a GPS device. === Examples === In this example, the contact information is presented as follows: With hCard microformat markup, that becomes: Here, the formatted name (fn), organisation (org), telephone number (tel) and web address (url) have been identified using specific class names and the whole thing is wrapped in class="vcard", which indicates that the other classes form an hCard (short for "HTML vCard") and are not merely coincidentally named. Other, optional, hCard classes also exist. Software, such as browser plug-ins, can now extract the information, and transfer it to other applications, such as an address book. == Specific microformats == Several microformats have been developed to enable semantic markup of particular types of information. However, only hCard and hCalendar have been ratified, the others remaining as drafts: hAtom (superseded by h-entry and h-feed) – for marking up Atom feeds from within standard HTML hCalendar – for events hCard – for contact information; includes: adr – for postal addresses geo – for geographical coordinates (latitude, longitude) hMedia – for audio/video content hAudio – for audio content hNews – for news content hProduct – for products hRecipe – for recipes and foodstuffs. hReview – for reviews rel-directory – for distributed directory creation and inclusion rel-enclosure – for multimedia attachments to web pages rel-license – specification of copyright license rel-nofollow, an attempt to discourage third-party content spam (e.g. spam in blogs) rel-tag – for decentralized tagging (Folksonomy) XHTML Friends Network (XFN) – for social relationships XOXO – for lists and outlines == Uses == Using microformats within HTML code provides additional formatting and semantic data that applications can use. For example, applications such as web crawlers can collect data about online resources, or desktop applications such as e-mail clients or scheduling software can compile details. The use of microformats can also facilitate "mash ups" such as exporting all of the geographical locations on a web page into (for example) Google Maps to visualize them spatially. Several browser extensions, such as Operator for Firefox and Oomph for Internet Explorer, provide the ability to detect microformats within an HTML document. When hCard or hCalendar are involved, such browser extensions allow microformats to be exported into formats compatible with contact management and calendar utilities, such as Microsoft Outlook. When dealing with geographical coordinates, they allow the location to be sent to applications such as Google Maps. Yahoo! Query Language can be used to extract microformats from web pages. On 12 May 2009 Google announced that they would be parsing the hCard, hReview and hProduct microformats, and using them to populate search result pages. They subsequently extended this in 2010 to use hCalendar for events and hRecipe for cookery recipes. Similarly, microformats are also processed by Bing and Yahoo!. As of late 2010, these are the world's top three search engines. Microsoft said in 2006 that they needed to incorporate microformats into upcoming projects, as did other software companies. Alex Faaborg summarizes the arguments for putting the responsibility for microformat user interfaces in the web browser rather than making more complicated HTML: Only the web browser knows what applications are accessible to the user and what the user's preferences are It lowers the barrier to entry for web site developers if they only need to do the markup and not handle "appearance" or "action" issues Retains backwards compatibility with web browsers that do not support microformats The web browser presents a single point of entry from the web to the user's computer, which simplifies security issues == Evaluation == Various commentators have offered review and discussion on the design principles and practical aspects of microformats. Microformats have been compared to other approaches that seek to serve the same or similar purpose. As of 2007, there had been some criticism of one, or all, microformats. The spread and use of microformats was being advocated as of 2007. Opera Software CTO and CSS creator Håkon Wium Lie said in 2005 "We will also see a bunch of microformats being developed, and that’s how the semantic web will be built, I believe." However, in August 2008 Toby Inkster, author of the "Swignition" (formerly "Cognition") microformat parsing service, pointed out that no new microformat specifications had been published since 2005. === Design principles === Computer scientist and entrepreneur, Rohit Khare stated that reduce, reuse, and recycle is "shorthand for several design principles" that motivated the development and practices behind microformats. These aspects can be summarized as follows: Reduce: favor the simplest solutions and focus attention on specific problems; Reuse: work from experience and favor examples of current practice; Recycle: encourage modularity and the ability to embed, valid XHTML can be reused in blog posts, RSS feeds, and anywhere else you can access the web. === Accessibi
Read more →
Key–value database

A key-value database, or key-value store, is a data storage paradigm designed for storing, retrieving, and managing associative arrays, a data structure more commonly known today as a dictionary. Dictionaries contain a collection of objects, or records, which in turn have many different fields within them. These records are stored and retrieved using a key that uniquely identifies the record, and is used to find the data within the database. Key-value databases differ from the better known relational databases (RDB). RDBs pre-define the data structure in the database as a series of tables containing fields with well-defined data types. Exposing the data types to the database program allows it to apply various optimizations. In contrast, key-value systems treat the value as opaque to the database itself, and typically support only simple operations such as storing, retrieving, updating, and deleting a value by its key. This offers considerable flexibility and makes such systems well suited to low-latency, high-throughput workloads dominated by direct key lookups, but less suitable for applications that require complex queries or explicit relationships among records. A lack of standardization, limited transaction support, and relatively simple query interfaces long restricted many key-value systems to specialized uses, but the rapid move to cloud computing after 2010 helped drive renewed interest in them as part of the broader NoSQL movement. Some graph databases, such as ArangoDB, are also key–value databases internally, adding the concept of relationships (pointers) between records as a first-class data type. == Types and examples == Key–value systems span a wide consistency spectrum, from eventually consistent designs to strongly consistent or serializable ones, and some allow the consistency level to be configured as part of the trade-off against latency and availability. Renewed interest in key–value and other NoSQL systems was driven in part by the demands of big data, distributed, and cloud applications. Their scalability and availability made them attractive for cloud data management, although limited transaction support, low-level query interfaces, and the lack of standardization remained obstacles to wider adoption. Some maintain data in memory (RAM), while others employ solid-state drives or rotating disks. Some key–value systems add additional structure to their keys. For example, Oracle NoSQL Database organizes records using composite keys with "major" and "minor" components, an arrangement that Oracle compares to a directory-path structure in a file system. More generally, however, key–value stores are defined by their use of unique keys associated with opaque values and by their emphasis on simple key-based operations. Unix included dbm (database manager), a minimal database library written by Ken Thompson for managing associative arrays with a single key and hash-based access. Later implementations and related libraries included sdbm, GNU dbm (gdbm), and Berkeley DB. A more recent example is RocksDB, a persistent key–value storage engine developed at Facebook and designed for large-scale applications. Other examples include in-memory systems such as Memcached and Redis, and persistent systems such as Berkeley DB, Riak, and Voldemort.
Read more →
Outline of electronics

The following outline is provided as an overview of and topical guide to electronics: Electronics – branch of physics, engineering and technology dealing with electrical circuits that involve active semiconductor components and associated passive interconnection technologies. == Branches == === Classical electronics === Analog electronics Digital electronics Electronic instrumentation Electronic engineering Microelectronics Optoelectronics Power electronics Printed electronics Semiconductor technology Schematic capture Thermal management Automation Electronics === Advanced topics === Atomtronics Bioelectronics Failure modes of electronics Flexible electronics Low-power electronics Microelectromechanical systems (MEMS) Molecular electronics Nanoelectronics Organic electronics Photonics Piezotronics Quantum electronics Spintronics === History of electronics === History of electronic engineering History of radar History of radio History of television == General concepts == === Data converters === Analog-to-digital converters (ADC) Aliasing Successive approximation ADC Dual-slope ADC Quantization Sensor resolution Sampling Delta-sigma ADC Digital-to-analog converters (DAC) Digital potentiometer Binary weighted resistor converter Charge distribution DAC Pulse width modulator Reconstruction filter The R2R ladder === Digital electronics === Binary decision diagrams Boolean algebra Combinational logic Counters (digital) De Morgan's laws Digital circuit Formal verification Karnaugh maps Logic families Logic gate Logic minimization Logic simulation Logic synthesis Registers Sequential logic State machines Truth tables Transparent latch === Electrical element/discretes === Passive elements: Capacitor Inductor Memristor Resistor Transformer Active elements: Diode Zener diode Light-emitting diode PIN diode Schottky diode Avalanche diode Laser diode Microcontroller Operational amplifier Thyristor DIAC TRIAC IGBT Transistor Bipolar transistor (BJT) Field effect transistor (FET) Darlington transistor Other components Aural devices Battery (electricity) Crystal oscillator Electromechanical devices Sensors Surface acoustic wave (SAW) === Electronics analysis === Electronic packaging Electronic circuit simulation Electronic design automation Electronic noise Mathematical methods in electronics Thermal management of electronic devices and systems === Electronic circuits === Amplifiers Differential amplifiers Feedback amplifiers Power amplifiers Comparators Converters Filters Active filters Passive filters Digital filters Oscillators Phase-locked loops Timers === Electronic equipment === Air conditioner Breathalyzer Central heating Clothes dryer Computer/Notebook Dishwasher Freezer Home robot Home entertainment system Information technologies Cooker Microwave oven Refrigerator Robotic vacuum cleaner Tablet Telephone Water heater Washing machine === Television === Analog television History of television Television show Television broadcaster Timeline of the introduction of television in countries Mechanical television Color television Digital television Digital television transition Smart television Streaming television Internet Protocol television 3D television Terrestrial television ==== Television broadcasting ==== === Electronic instrumentation === Ammeter Capacitance meter Distortionmeter Electric energy meter LCR meter Microwave power meter Multimeter Network analyzer Ohmmeter Oscilloscope Psophometer Q meter Signal analyzer Signal generator Spectrum analyzer Transistor tester Tube tester Wattmeter Vectorscope Video signal generator Voltmeter VU meter === Memory technology === Flash memory Hard drive systems Optical storage Probe Storage Programmable read-only memory Read-only memory Solid-state drive (SSD) Volatile memory === Microcontrollers === Features Analog-to-digital converter Central processing unit (CPU) Clock generator (Quartz timing crystal, resonator or RC circuit) Debugging support Digital-to-analog converters Discrete input and output bits In-circuit programming Non-volatile memory (ROM, EPROM, EEPROM or Flash) Peripherals (Timers, event counters, PWM generators, and watchdog) Serial interface (Input/output such as serial ports (UARTs)) Serial communications (I²C, Serial Peripheral Interface and Controller Area Network) Volatile memory (RAM) 8-bit microcontroller families: AVR - PIC - COP8 - MCS-48 - MCS-51 - Z8 - eZ80 - HC08 - HC11 - H8 - PSoC Some notable suppliers: ARM Atmel Cypress Semiconductor Freescale Intel MIPS Microchip Technology NXP Semiconductors Parallax Propeller PowerPC Rabbit 2000 Renesas RX, V850 Silicon Laboratories STMicroelectronics Texas Instruments Toshiba TLCS === Optoelectronics === Optical fiber Optical properties Optical receivers Optical system design Optical transmitters === Physical laws === Ampère's law Coulomb's law Faraday's law of induction/Faraday-Lenz law Gauss's law Kirchhoff's circuit laws Current law Voltage law Maxwell's equations Gauss's law Faraday's law of induction Ampère's law Ohm's law === Power electronics === Power Devices Gate turn-off thyristor MOS-controlled thyristor (MCT) Power BJT/MOSFET Static induction devices Electric power conversion DC to DC DC to DC converter Voltage stabiliser Linear regulator AC to DC Rectifier Mains power supply unit (PSU) Switched-mode power supply DC to AC Inverter AC to AC Cycloconverter Transformer Variable frequency transformer Voltage converter Voltage regulator Power applications Automotive applications Capacitor charging applications Electronic ballasts Energy harvesting technologies Flexible AC transmission systems (FACTS) High frequency inverters HVDC transmission Motor controller Photovoltaic system Conversion Power factor correction circuits Power supply Renewable energy sources Switching power converters Uninterruptible power supply Wind power === Programmable devices === Application-specific integrated circuit (ASIC) Complex programmable logic device (CPLD) Erasable programmable logic device (EPLD) Simple programmable logic device (SPLD) Macrocell array Programmable array logic (PAL) Programmable logic array (PLA) Programmable logic device (PLD) Field-programmable gate array (FPGA) VHSIC Hardware Description Language (VHDL) Verilog Hardware Description Language Some notable suppliers: Altera - Atmel - Cypress Semiconductor - Lattice Semiconductor - Xilinx === Semiconductors theory === Properties Bipolar junction transistors Capacitance voltage profiling Charge carrier Charge-transfer complex Deep-level transient spectroscopy Depletion region Density of states Diode modelling Direct band gap Electronic band structure Energy level Exciton Field-effect transistors Metal–semiconductor junction MOSFETs N-type semiconductor Organic semiconductors P–n junction P-type semiconductor Photoelectric effect Quantum tunneling Semiconductor chip Semiconductor detector Solar cell Transistor model Thin film Tight-binding model Device Fabrication Semiconductor device fabrication Semiconductor industry Semiconductor consolidation == Applications == Audio electronics Automotive electronics Avionics Control Systems Consumer electronics Data acquisition E-health Electronic book Electronics industry Electronic warfare Embedded systems Home automation Integrated circuits Marine electronics Microwave technology Military electronics Multimedia Nuclear electronics Open hardware Radar and Radionavigation Radio electronics Terahertz technology Video hardware Wired and Wireless Communications
Read more →
List of UPnP AV media servers and clients

This is a list of UPnP AV media servers and client application or hard appliances. == UPnP AV media servers == === Software === === Cross-platform === Allonis myServer, a multi-faceted media player/organizer with a DLNA/UPnP server, controller, and renderer, including conversion. Runs on Microsoft Windows. Supports most all HTML5 devices as remote controls. Asset UPnP (DLNA compatible) from Illustrate. An audio specific UPnP/DLNA server for Windows, QNAP, macOS and Linux. Features audio WAVE/LPCM transcoding from a range of audio codecs, ReplayGain and playlists. FreeMi UPnP Media Server, very simple server, historically used to stream to the STB Freebox, based on .net/mono. Home Media Server, a free media server/player/controller for Windows, Linux, macOS, individual device settings, transcoding, external and internal subtitles, restricted device access to folders, uploading files, Internet-Radio, Internet-Television, Digital Video Broadcasting (DVB), DMR-control and "Play To", Music (Visualization), Photo (Slideshow), support for 3D-subtitles, support for BitTorrent files, Web-navigation with HTML5 player, Digital Media Renderer (DMR) emulation for AirPlay and Google Cast devices. Jellyfin, a free and open-source suite of multimedia applications designed to organize, manage, and share digital media files to networked devices. JRiver Media Center, a multi-faceted media player/organizer with a DLNA/UPnP server, controller, and renderer, including conversion. Supports Microsoft Windows, macOS and Linux. Kodi (previously XBMC), a cross platform open source software media-player/media center for Android, Apple TV, Linux, macOS and Windows. LimboMedia, a free cross platform home- and UPnP/DLNA mediaserver with android app and WebM transcoding for browser playback (build with java and FFmpeg). MinimServer, a Java-based highly configurable uPnP/DNLA music server with additional consideration given to Classical Music, supports transcoding with MinimStreamer, supports Microsoft Windows, macOS, Linux, and various NAS devices. Neutron Music Player, acts as a cross platform UPnP/DLNA Media Renderer server available for Android, iOS, BlackBerry 10 & PlayBook platforms. Supports gapless playback and has possibility to output rendered audio further to the high-resolution internal DAC or external USB DAC or another UPnP/DLNA Media Renderer with all supported DSP effects applied. Plex, a cross-platform and closed source software media player and entertainment hub for digital media, available for macOS, Microsoft Windows, Linux, as well as mobile clients for iOS (including Apple TV (2nd generation) onwards), Android, Windows Phone, and many devices such as Xbox. Supports on-the-fly transcoding of video and music. PonoMusic World. Based on the JRiver Media Center software, includes similar features along with a store for purchasing HD audio tracks. PS3 Media Server, a free cross platform Java based UPnP DLNA server especially good for AVC and other current HD media codecs with on-the-fly transcoding. Serviio, is available with a free and a pro license. It can stream media files (music, video or images) to renderer devices (e.g. a TV set, Blu-ray player, games console or mobile phone) on a local area network. TVMOBiLi, a cross platform, high performance UPnP/DLNA Media Server for Windows, macOS and Linux. TwonkyMedia server, a cross-platform multimedia server and entertainment hub for digital media, available for Android, Apple TV, iOS, Linux, macOS, Microsoft Windows, Windows Phone, and Xbox 360. Universal Media Server, a free (open source) DLNA-compliant UPnP Media Server for Windows, macOS and Linux (originally based on the PS3 Media Server). It is able to stream videos, audio and images to any DLNA-capable device. It contains more features than most paid UPnP/DLNA Media Servers. It streams to many devices including TVs (Samsung, Sony, Panasonic, LG, Philips and more.), PS3, Xbox(One/360), smartphones, Blu-ray players and more. vGet Cast, a simple, cross platform (Chrome App) DLNA server and controller for single, local video files. Vuze, an open-source Java-based BitTorrent client which contains MediaServer plugin. Wild Media Server, a media server/player/controller for Windows, Linux, macOS, individual device settings, transcoding, external and internal subtitles, restricted device access to folders, uploading files, Internet-Radio, Internet-Television, Digital Video Broadcasting (DVB), DMR-control and "Play To", Music (Visualization), Photo (Slideshow), support for 3D-subtitles, support for BitTorrent files, Web-navigation with HTML5 player, Digital Media Renderer (DMR) emulation for AirPlay and Google Cast devices. === Android === BubbleUPnP Android UPnP/DLNA server, player, controller and renderer CastLab Android UPnP/DLNA server. Pixel Media Server, Android UPnP/DLNA Media Server. Supports all popular Video and Audio files. It also support external subtitle file (SRT) Plato is an Android UPnP client app that can play videos and audio. Toaster Cast Android UPnP/DLNA server, controller and renderer vGet, Android App that can play videos embedded in websites on DLNA renderers. Media Cast UPnP, Android UPnP client app that can play videos/Audio. Media Server Pro is a DLNA server that allows individual file selections for sharing. Slick UPnP A minimal and intuitive open-source Android UPnP client app that can play video/audio. (It is not DMS) YAACC Open source UPnP controller, renderer and server app === Linux === === Microsoft Windows === Sundtek Streamingserver a native Windows TV Server providing DVB, ATSC and ISDB-T via UPnP/DLNA, it also supports streaming media files (it only supports TV devices from Sundtek). Stream What You Hear, a Windows application that streams the sound of your computer (i.e.: “what you hear”) to UPnP/DLNA device such as TVs, amps, network receivers, game consoles, etc... TVersity Media Server, a Windows application that streams multimedia content from a personal computer to UPnP, DLNA and mobile devices (Chromecast is also supported). It was the first media server to offer real-time transcoding (back in 2005). TVersity Screen Server, a Windows application that mirrors the screen of a personal computer to UPnP, DLNA and mobile devices. DVBViewer, a Windows application, mainly for TV/Radio recording/playback, but with the ability to stream live TV/radio as well as multimedia files via UPnP/DLNA. DivX, a Windows application, mainly for video encoding into DivX format, but has the ability to stream multimedia files via DLNA. foobar2000, a freeware audio player for Windows. Highly customizable, audio only. Download of dlna-extension from the developers' webpage necessary. Home Media Center, a free and open source media server compatible with DLNA. Includes web interface for streaming content to web browser (Android, iOS, ...), subtitles integration and Windows desktop streaming. This server is easy to use. KooRaRoo Media, a commercial DLNA media server and organizer for Windows. Includes on-the-fly transcoding, per-file and per-folder parental controls, powerful organizing features with dynamic playlists, Internet radio streaming, "Play To" functionality and remote device control, burned-in and external subtitles, extensive format support including RAW photo formats. Streams all files to all devices. Media Go, media player and tagger MediaMonkey, a free media player/tagger/editor with an UPnP/DLNA client and server for Microsoft Windows MusicBee, an audio player, supports UPnP via a plugin. Mezzmo, a commercial software package. Mezzmo streams music, movies, photos and subtitles to the UPnP and DLNA-enabled devices. It automatically finds and organizes music, movies and photos, imports multimedia files from iPad, iPhone, iPod, Audio CDs, iTunes, Windows Media Player and WinAmp. DLNA server supports all popular media file formats with real time transcoding to meet the device specifications. PlayOn, a commercial UPnP/DLNA media server for Windows, includes a transcoder for streaming web video. TVble, a cloud connected (Rotten tomatoes/TMDB etc.), Torrent streaming, DLNA enabled media server. Allows single file or playlist downloads. Windows Media Connect from Microsoft, a free UPnP AV MediaServer and control point (server and client) for Microsoft Windows WMC version 2.0 can be installed for usage with Windows Media Player 10 for Windows XP WMC version 3.0 can be installed for usage with Windows Media Player 11 for Windows XP WMC version 4.0 comes pre-installed on Windows Vista with its Windows Media Player 11 WMC can also refer to Windows Media Center. From the Windows Media Center entry in Wikipedia: In May 2015, Microsoft announced that Windows Media Center would be discontinued on Windows 10, and that it would be uninstalled when upgrading; but stated that those upgrading from a version of Windows that included the Media Center application would receive the paid Windows DVD Player app to maintain DVD playback functio
Read more →
Macroelectronics

Macroelectronics are flexible electronics that cover a large area. The most visible example of macroelectronics is flat-panel displays. Other emerging applications include rollable display, printable thin film solar cell and electronic skin. Flat-panel displays fabricated on glass substrates are fragile so fabricating directly on flexible substrates, such as polymers is being explored. Displays made on thin polymer substrates can be more rugged than glass. In September 2005, Philips Polymer Vision revealed the world's first prototype of a rollable electronic reader, which can unfold to a 5-inch display and roll back into a pocket-size (100×60×20 mm) device. Thin-film devices on flexible polymer substrates can lend themselves to low-cost fabrication processes (i.e., roll-to-roll printing), resulting in lightweight, rugged and flexible macroelectronic products.
Read more →
Marq (company)

Marq (formerly Lucidpress) is a cloud-based software platform for brand management and templated content creation. The platform integrates with digital asset management (DAM) systems—including Aprimo and Bynder and customer relationship management (CRM) tools such as Salesforce and HubSpot. Marq also includes AI-assisted features for brand compliance and content automation. Trade publications have described the product as a brand templating and creative automation platform. == History == In October 2013, Lucid Software, Inc. announced Lucidpress as a public beta version. Following its release, Lucidpress was featured in TechCrunch, VentureBeat and PC World, with TechCrunch noting: "I had a chance to test the app before its launch and it is indeed very easy to use. If you've ever used a desktop publishing app in the past, you'll feel right at home with Marq, as it features the same kind of standard top-bar menu and layout options as most other publishing apps. In terms of features, it can also hold its own against similar desktop-based apps." In May 2021, Lucidpress announced that it had been acquired by Charles Thayne Capital ("CTC"), a growth-oriented and technology-focused private investment firm. In May 2021, following its acquisition by Charles Thayne Capital, Lucidpress became fully independent. Owen Fuller, who had served as General Manager since 2017, was appointed Chief Executive Officer. In 2022, Lucidpress was rebranded as Marq to reflect the company’s shift toward brand templating and creative automation tools, while continuing to support its publishing features. == Features == Marq integrates with customer relationship management (CRM) platforms such as Salesforce and HubSpot, enabling the creation of personalized, on-brand sales and marketing materials. The platform also connects with multiple digital asset management (DAM) systems, including Bynder, Aprimo, MediaValet, PhotoShelter, Acquia, and Canto. == Investment == Lucid Software raised $1 million in Seed in 2011, led by Google Ventures. In May 2014, the company received a $5 million investment. The round was led by Salt Lake-based Kickstart Seed Fund. In September 2016, the company received a $36 million investment from Spectrum Equity.
Read more →
Digital media in education

Digital media in education refers to the use of digital technologies to support and enhance teaching and learning processes. This includes the application of multiple digital software applications, devices, and online platforms as tools for learning. Learners interact with these technologies to access, analyze, evaluate, and create media content and communication in various forms. The integration of digital media in education has dramatically increased over time, significantly transforming traditional educational practices. When viewed through a global and inclusive lens, digital education should be guided by principles of equity, inclusion, and public infrastructure to ensure meaningful participation of all learners. == History == === 20th century === Technological advances in the 20th century, particularly the invention of the Internet, laid the foundation for incorporating technology into education. In the early 1900s, the overhead projector and instructional radio broadcasts were among the first technologies used for educational purposes. The introduction of computers in classrooms occurred in 1950, when a flight simulation program was developed to train pilots at the Massachusetts Institute of Technology. However, access to computers remained extremely limited for several decades. In 1964, John Kemeny and Thomas Kurtz developed the BASIC programming language, which simplified computer interaction and introduced time-sharing, enabling multiple users to work on the same system simultaneously. This innovation made computing increasingly accessible for educational settings. By the 1980s, schools began to show more interest in computers as companies released mass-market devices to the public. Networking further enabled the interconnection of computers into unified communication systems, which proved more efficient and cost-effective than previous stand-alone machines. This development prompted wider adoption of computing in educational institutions. The invention of the World Wide Web in 1992 further simplified internet navigation and sparked further interest in educational settings. Initially, computers were integrated into school curricula for tasks such as word processing, spreadsheet creation, and data organization. By the late 1990s, the Internet became a research tool, functioning as a vast library. By 1999, 99% of public school teachers in the United States reported having access to at least one computer in their schools, and 84% had a computer available in their classrooms. The emergence of World Wide Web also contributed to the development of learning management systems (LMS), which allowed educators to create online teaching environments for content storage, student activities, discussions, and assignments. Advances in digital compression and high-speed Internet made video creation and distribution more affordable, fostering the use of the systems designed for recording lectures. These tools were often incorporated into learning management platforms, supporting the expansion of fully online courses. === 21st century === By 2002, the Massachusetts Institute of Technology began offering recorded lectures to the public, marking a significant milestone in the movement toward accessible online education. The launch of YouTube in 2005 further transformed educational content distribution. Educators increasingly uploaded lectures and instructional videos on platforms with initiatives like Khan Academy, which was active in 2006, contributing to You Tube's role as a prominent educational resource. In 2007, Apple launched iTunesU, another platform for sharing educational resources and videos. Meanwhile, learning management systems gained popularity, with Blackboard and Canvas becoming two of the most widely used platforms with Canvas's release in 2008. That same year also marked the introduction of the first Massive Open Online Course (MOOC), which provided open access to webinars and expert-led instructions for global learners. As technology evolved, traditional projectors were gradually replaced by interactive whiteboards, which enabled educators to integrate digital tools more effectively in their classrooms. By 2009, 97% of classrooms in the United States had at least one computer, and 93% had Internet access. The COVID-19 pandemic, which forced schools across the world to close, significantly impacted education with schools shifting to distance education. Students attended classes remotely using devices such as laptops, phones, and tablets, supported by digital platforms that facilitated at-home learning environments. However, adapting assessment methods to the new learning environment posed certain challenges. A study conducted by Eddie M. Mulenga and José M. Marbán on Zambian students during the pandemic revealed difficulties in adapting to digital learning, particularly in subjects like mathematics. Similar issues were reported among students in Romania, where the transition to virtual learning presented significant obstacles in engagement and adaptability. === Post-pandemic developments === In the period following the onset of COVID-19, education systems worldwide rapidly adopted digital solutions to maintain continuity of learning and teaching. By the end of March 2020, all 46 OECD and partners countries closed some or all of their schools nationwide. By June 2020, the length of school closures in these countries ranged from 7 to over 18 weeks. These disruptions in formal education prompted governments and educators to quickly adopt digital learning. This global shift to online education highlighted considerable inequalities in digital access, although many systems struggled with inequitable access, especially in regions lacking devices, stable internet connections, or conducive home learning environments. Stimultaneously, commercial educational technology (ed-tech) companies introduced rapid digital solutions to the disruption caused by the pandemic. This led to what has been described as a "seller's market," where the urgency of implementation may cause the prioritization of availability and scale over pedagogical and equity considerations. In the post-pandemic era, digital media in education continues to evolve. It increasingly intersects with artificial intelligence (AI) technologies such as adaptive learning platforms, AI-enabled content generation, and personalized learning environments. These tools enhance global engagement and access but also raise concerns about infrastructure, inclusivity, ethical implementation as well as critical pedagogies. Scholars recommend that educators and policymakers adopt inclusive practices, prioritize equitable infrastructure, and develop critical digital literacy. Facer and Selwyn also emphasize the need for public digital infrastructure and sustainable and justice-oriented policies that empower all learners. Overall, these perspectives reflect a growing consensus that digital media in education should be implemented critically to promote inclusive, multimodal, and future-oriented learning environments.
Read more →
Push technology

Push technology, also known as server push, is a communication method where the communication is initiated by a server rather than a client. This approach is different from the "pull" method where the communication is initiated by a client. In push technology, clients can express their preferences for certain types of information or data, typically through a process known as the publish–subscribe model. In this model, a client "subscribes" to specific information channels hosted by a server. When new content becomes available on these channels, the server automatically sends, or "pushes," this information to the subscribed client. Under certain conditions, such as restrictive security policies that block incoming HTTP requests, push technology is sometimes simulated using a technique called polling. In these cases, the client periodically checks with the server to see if new information is available, rather than receiving automatic updates. == General use == Synchronous conferencing and instant messaging are examples of push services. Chat messages and sometimes files are pushed to the user as soon as they are received by the messaging service. Both decentralized peer-to-peer programs (such as WASTE) and centralized programs (such as IRC or XMPP) allow pushing files, which means the sender initiates the data transfer rather than the recipient. Email may also be a push system: SMTP is a push protocol (see Push e-mail). However, the last step—from mail server to desktop computer—typically uses a pull protocol like POP3 or IMAP. Modern e-mail clients make this step seem instantaneous by repeatedly polling the mail server, frequently checking it for new mail. The IMAP protocol includes the IDLE command, which allows the server to tell the client when new messages arrive. The original BlackBerry was the first popular example of push-email in a wireless context. Another example is the PointCast Network, which was widely covered in the 1990s. It delivered news and stock market data as a screensaver. Both Netscape and Microsoft integrated push technology through the Channel Definition Format (CDF) into their software at the height of the browser wars, but it was never very popular. CDF faded away and was removed from the browsers of the time, replaced in the 2000s with RSS (a pull system.) Other uses of push-enabled web applications include software updates distribution ("push updates"), market data distribution (stock tickers), online chat/messaging systems (webchat), auctions, online betting and gaming, sport results, monitoring consoles, and sensor network monitoring. == Examples == === Web push === The Web push proposal of the Internet Engineering Task Force is a simple protocol using HTTP version 2 to deliver real-time events, such as incoming calls or messages, which can be delivered (or "pushed") in a timely fashion. The protocol consolidates all real-time events into a single session which ensures more efficient use of network and radio resources. A single service consolidates all events, distributing those events to applications as they arrive. This requires just one session, avoiding duplicated overhead costs. Web Notifications are part of the W3C standard and define an API for end-user notifications. A notification allows alerting the user of an event, such as the delivery of an email, outside the context of a web page. As part of this standard, Push API is fully implemented in Chrome, Firefox, and Edge, and partially implemented in Safari as of February 2023. === HTTP server push === HTTP server push (also known as HTTP streaming) is a mechanism for sending unsolicited (asynchronous) data from a web server to a web browser. HTTP server push can be achieved through any of several mechanisms. As a part of HTML5 the Web Socket API allows a web server and client to communicate over a full-duplex TCP connection. Generally, the web server does not terminate a connection after response data has been served to a client. The web server leaves the connection open so that if an event occurs (for example, a change in internal data which needs to be reported to one or multiple clients), it can be sent out immediately; otherwise, the event would have to be queued until the client's next request is received. Most web servers offer this functionality via CGI (e.g., Non-Parsed Headers scripts on Apache HTTP Server). The underlying mechanism for this approach is chunked transfer encoding. Another mechanism is related to a special MIME type called multipart/x-mixed-replace, which was introduced by Netscape in 1995. Web browsers interpret this as a document that changes whenever the server pushes a new version to the client. It is still supported by Firefox, Opera, and Safari today, but it is ignored by Internet Explorer and is only partially supported by Chrome. It can be applied to HTML documents, and also for streaming images in webcam applications. The WHATWG Web Applications 1.0 proposal includes a mechanism to push content to the client. On September 1, 2006, the Opera web browser implemented this new experimental system in a feature called "Server-Sent Events". It is now part of the HTML5 standard. === Pushlet === In this technique, the server takes advantage of persistent HTTP connections, leaving the response perpetually "open" (i.e., the server never terminates the response), effectively fooling the browser to remain in "loading" mode after the initial page load could be considered complete. The server then periodically sends snippets of JavaScript to update the content of the page, thereby achieving push capability. By using this technique, the client doesn't need Java applets or other plug-ins in order to keep an open connection to the server; the client is automatically notified about new events, pushed by the server. One serious drawback to this method, however, is the lack of control the server has over the browser timing out; a page refresh is always necessary if a timeout occurs on the browser end. === Long polling === Long polling is itself not a true push; long polling is a variation of the traditional polling technique, but it allows emulating a push mechanism under circumstances where a real push is not possible, such as sites with security policies that require rejection of incoming HTTP requests. With long polling, the client requests to get more information from the server exactly as in normal polling, but with the expectation that the server may not respond immediately. If the server has no new information for the client when the poll is received, then instead of sending an empty response, the server holds the request open and waits for response information to become available. Once it does have new information, the server immediately sends an HTTP response to the client, completing the open HTTP request. Upon receipt of the server response, the client often immediately issues another server request. In this way the usual response latency (the time between when the information first becomes available and the next client request) otherwise associated with polling clients is eliminated. For example, BOSH is a popular, long-lived HTTP technique used as a long-polling alternative to a continuous TCP connection when such a connection is difficult or impossible to employ directly (e.g., in a web browser); it is also an underlying technology in the XMPP, which Apple uses for its iCloud push support. === Flash XML Socket relays === This technique, used by chat applications, makes use of the XML Socket object in a single-pixel Adobe Flash movie. Under the control of JavaScript, the client establishes a TCP connection to a unidirectional relay on the server. The relay server does not read anything from this socket; instead, it immediately sends the client a unique identifier. Next, the client makes an HTTP request to the web server, including this identifier with it. The web application can then push messages addressed to the client to a local interface of the relay server, which relays them over the Flash socket. The advantage of this approach is that it appreciates the natural read-write asymmetry that is typical of many web applications, including chat, and as a consequence it offers high efficiency. Since it does not accept data on outgoing sockets, the relay server does not need to poll outgoing TCP connections at all, making it possible to hold open tens of thousands of concurrent connections. In this model, the limit to scale is the TCP stack of the underlying server operating system. === Reliable Group Data Delivery (RGDD) === In services such as cloud computing, to increase reliability and availability of data, it is usually pushed (replicated) to several machines. For example, the Hadoop Distributed File System (HDFS) makes 2 extra copies of any object stored. RGDD focuses on efficiently casting an object from one location to many while saving bandwidth by sending minimal number of copies (only one in the best case) of
Read more →