AI Avatar Based On Photo

AI Avatar Based On Photo — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

  • Admissible heuristic

    Admissible heuristic

    In computer science, specifically in algorithms related to pathfinding, a heuristic function is said to be admissible if it never overestimates the cost of reaching the goal, i.e. the cost it estimates to reach the goal is not higher than the lowest possible cost from the current point in the path. In other words, it should act as a lower bound. It is related to the concept of consistent heuristics. While all consistent heuristics are admissible, not all admissible heuristics are consistent. == Search algorithms == An admissible heuristic is used to estimate the cost of reaching the goal state in an informed search algorithm. In order for a heuristic to be admissible to the search problem, the estimated cost must always be lower than or equal to the actual cost of reaching the goal state. The search algorithm uses the admissible heuristic to find an estimated optimal path to the goal state from the current node. For example, in A search the evaluation function (where n {\displaystyle n} is the current node) is: f ( n ) = g ( n ) + h ( n ) {\displaystyle f(n)=g(n)+h(n)} where f ( n ) {\displaystyle f(n)} = the evaluation function. g ( n ) {\displaystyle g(n)} = the cost from the start node to the current node h ( n ) {\displaystyle h(n)} = estimated cost from current node to goal. h ( n ) {\displaystyle h(n)} is calculated using the heuristic function. With a non-admissible heuristic, the A algorithm could overlook the optimal solution to a search problem due to an overestimation in f ( n ) {\displaystyle f(n)} . == Formulation == n {\displaystyle n} is a node h {\displaystyle h} is a heuristic h ( n ) {\displaystyle h(n)} is cost indicated by h {\displaystyle h} to reach a goal from n {\displaystyle n} h ∗ ( n ) {\displaystyle h^{}(n)} is the optimal cost to reach a goal from n {\displaystyle n} h ( n ) {\displaystyle h(n)} is admissible if, ∀ n {\displaystyle \forall n} h ( n ) ≤ h ∗ ( n ) {\displaystyle h(n)\leq h^{}(n)} == Construction == An admissible heuristic can be derived from a relaxed version of the problem, or by information from pattern databases that store exact solutions to subproblems of the problem, or by using inductive learning methods. == Examples == Two different examples of admissible heuristics apply to the fifteen puzzle problem: Hamming distance Manhattan distance The Hamming distance is the total number of misplaced tiles. It is clear that this heuristic is admissible since the total number of moves to order the tiles correctly is at least the number of misplaced tiles (each tile not in place must be moved at least once). The cost (number of moves) to the goal (an ordered puzzle) is at least the Hamming distance of the puzzle. The Manhattan distance of a puzzle is defined as: h ( n ) = ∑ all tiles d i s t a n c e ( tile, correct position ) {\displaystyle h(n)=\sum _{\text{all tiles}}{\mathit {distance}}({\text{tile, correct position}})} Consider the puzzle below in which the player wishes to move each tile such that the numbers are ordered. The Manhattan distance is an admissible heuristic in this case because every tile will have to be moved at least the number of spots in between itself and its correct position. The subscripts show the Manhattan distance for each tile. The total Manhattan distance for the shown puzzle is: h ( n ) = 3 + 1 + 0 + 1 + 2 + 3 + 3 + 4 + 3 + 2 + 4 + 4 + 4 + 1 + 1 = 36 {\displaystyle h(n)=3+1+0+1+2+3+3+4+3+2+4+4+4+1+1=36} == Optimality proof == If an admissible heuristic is used in an algorithm that, per iteration, progresses only the path of lowest evaluation (current cost + heuristic) of several candidate paths, terminates the moment its exploration reaches the goal and, crucially, closes all optimal paths before terminating (something that's possible with A search algorithm if special care isn't taken), then this algorithm can only terminate on an optimal path. To see why, consider the following proof by contradiction: Assume such an algorithm managed to terminate on a path T with a true cost Ttrue greater than the optimal path S with true cost Strue. This means that before terminating, the evaluated cost of T was less than or equal to the evaluated cost of S (or else S would have been picked). Denote these evaluated costs Teval and Seval respectively. The above can be summarized as follows, Strue < Ttrue Teval ≤ Seval If our heuristic is admissible it follows that at this penultimate step Teval = Ttrue because any increase on the true cost by the heuristic on T would be inadmissible and the heuristic cannot be negative. On the other hand, an admissible heuristic would require that Seval ≤ Strue which combined with the above inequalities gives us Teval < Ttrue and more specifically Teval ≠ Ttrue. As Teval and Ttrue cannot be both equal and unequal our assumption must have been false and so it must be impossible to terminate on a more costly than optimal path. As an example, let us say we have costs as follows:(the cost above/below a node is the heuristic, the cost at an edge is the actual cost) 0 10 0 100 0 START ---- O ----- GOAL | | 0| |100 | | O ------- O ------ O 100 1 100 1 100 So clearly we would start off visiting the top middle node, since the expected total cost, i.e. f ( n ) {\displaystyle f(n)} , is 10 + 0 = 10 {\displaystyle 10+0=10} . Then the goal would be a candidate, with f ( n ) {\displaystyle f(n)} equal to 10 + 100 + 0 = 110 {\displaystyle 10+100+0=110} . Then we would clearly pick the bottom nodes one after the other, followed by the updated goal, since they all have f ( n ) {\displaystyle f(n)} lower than the f ( n ) {\displaystyle f(n)} of the current goal, i.e. their f ( n ) {\displaystyle f(n)} is 100 , 101 , 102 , 102 {\displaystyle 100,101,102,102} . So even though the goal was a candidate, we could not pick it because there were still better paths out there. This way, an admissible heuristic can ensure optimality. However, note that although an admissible heuristic can guarantee final optimality, it is not necessarily efficient.

    Read more →
  • Industry Dive

    Industry Dive

    Industry Dive is a United States-based business-to-business news organization with an estimated 18 million readers in more than 25 industries, such as banking and waste management. Since 2022, it has been owned by Informa plc. Industry Dive aims to serve business executives who read news on their mobile phones. The company had an estimated revenue of more than of more than $110 million in 2023. As of 2020, it has more than 300 employees, including 80 journalists and 12 engineers. Its headquarters is in Washington, D.C. == History == Industry Dive was formed in 2012 by Sean Griffey (president), Eli Dickinson (chief technology officer), and Ryan Willumson (chief revenue officer). It was funded with $900,000 from private investors in 2012 and 2013. The company covered five industries: construction, education, marketing, utility, and waste. In 2016, it began its Dive Awards. Industry Dive's revenues quadrupled from 2015 to 2018, putting it in the top half of the Deloitte Technology Fast 500 and the top 20 percent of the Inc. Top 5000 list. In 2019, Falfurrias Capital Partners acquired a majority stake in the company. ID's content marketing clients included IBM, Siemens, and UPS. In 2020, DCA Live named Industry Dive to its "Red Hot Companies" list, which recognizes the D.C. area's 'fastest-growing' companies. In the same year, Industry Dive acquired CFO. In 2021, Industry Dive acquired PharmaVOICE. In 2022, it was purchased by Informa plc, which bought its majority stake from Falfurrias Capital Partners for about $530 million. == Publications == Industry Dive provides news coverage of a variety of industries including agriculture, banking, construction, education, fashion, healthcare, and manufacturing, each using a different website: == Awards == Industry Dive publications have received several national and regional Awards of Excellence from the American Society of Business Publication Editors, including for a series of 2020 articles about Big Pharma and the race for the coronavirus vaccine. The Washington Post recognized Industry Dive as a top place to work for four consecutive years, from 2016 to 2020.

    Read more →
  • Digital entertainment

    Digital entertainment

    Digital entertainment Industry includes, but is not restricted to, any combination of the following industries (that themselves have a considerable degree of overlap): digital media new media video on demand video games interactive entertainment online gambling mobile entertainment social media streaming services "Digital entertainment", largely a hard to define marketing term, rests upon entertainment technology and ultimately on the enabling basic technologies computers, Internet/World Wide Web, digital rights management, multimedia and streaming media. Apart from pure entertainment, the term rests upon the observation that already in 2011 in the UK, for example, "nearly half of people’s waking hours are spent using media content and communications services" ("screen time"). Digital entertainment is inextricably connected with digital marketing. People who follow influencers on social media for entertainment will receive a fair share of advertising at the same time. Digital merchandise is distributed with every computer game and popup ads or similar are ubiquitous in the online (gaming) world.

    Read more →
  • Open Media Framework Interchange

    Open Media Framework Interchange

    Open Media Format (OMF), Open Media Framework, or Open Media Framework Interchange (OMFI), is a platform-independent file format intended for transfer of digital media between different software applications. OMFI is a file format that aids in exchange of digital media across applications and platforms. This framework enables users to import media elements and to edit information and effects summaries. Sequential media representation is the primary concern that is addressed by this format. The primary objective of OMFI is video production. However, there are a number of additional features which can be listed as follows: The origin of the data can be easily backtracked or identified since the import material is in the form of a videotape or film. There are predefined effects and transitions, which paves the way for easy and quick overlapping and sequencing of various track. The format supports motion control. (i.e. enabling a particular segment to play at a ratio of the speed of another segment) Some of the key benefits of OMFI are: It saves time by getting rid of tape-based file transfers. It brings in flexibility owing to its ability to use a number of applications on multiple workstations. The format preserves the best sound and picture quality during all imports. It eliminates the risk of file formatting and incompatibilities, which in turn allows users to spend their productive time on the creative aspects of their work. It preserves the formatting information during file transfers between applications or workstations. Hence, the need for rebuilding the effects and sequences is eliminated. The OMFI format consists of four primary sections namely Header, Object data, Object dictionary and Track data. The header contains an index of all the segments that constitute the file.

    Read more →
  • Dental AI

    Dental AI

    Dental artificial intelligence (Dental AI) refers to the application of artificial intelligence (AI) and machine-learning methods to oral healthcare data. These systems can be used to find patterns or make predictions that can aid in diagnosis, treatment, patient communication, or practice management. == History and development == Research into AI for dentistry dates to the 1990s and 2000s, alongside early CAD/CAM and image-analysis work in dental radiology. Recent developments in deep learning, especially those involving computer vision, such as convolutional neural networks, trained on large image datasets, led to a rapid improvement in performance, as well as a move from prototype technology to productization suitable for use in dental chairs. Dental schools and continuing education programs started incorporating AI content in the 2020s. == Definition and core technologies == The dental AI software accomplishes this task by using various dental images and patient data. Dental images and data used by the dental AI software include bitewing and periapical X-rays, complete mouth X-rays, detailed 3D images, intraoral images, and the patient’s medical history. The dental AI software utilizes several core technologies in accomplishing its task of assisting the dentist. First, the dental AI software utilizes machine learning and deep learning using programs that can learn from examples. Such programs are referred to as convolutional neural network (CNN) and can detect cavities and identify bone changes related to gum disease. The dental AI software utilizes computer vision, which enables the AI software to identify and quantify important features in images and data, whether they are 2D images or 3D images. Natural language processing (NLP) is used for the AI software to understand written text and can automatically generate dental notes and communicate with the patient. Furthermore, the dental AI software utilizes predictive analytics to identify patients that are more prone to dental complications and can suggest the best intervals for checkups or future dental procedures. == Applications in dentistry == Reported clinical and operational applications include diagnostic assistance for caries and periodontal disease, treatment planning assistance, patient education overlays, quality assurance, curriculum assistance for dental education, and claims documentation. Systematic reviews continue to find image-based applications such as caries detection with some variability in study design and a need for prospective validation. == Academic research and clinical validation == Several peer-reviewed studies have measured the effectiveness of AI for applications such as interproximal caries detection and periodontal bone level assessment, showing improvements over unaided readings with a focus on bias within the dataset. The Dental AI Council found variability among clinicians for diagnosis and treatment planning, suggesting the use of a standard tool as an assist. == Industry adoption == Multiple vendors offer FDA-cleared chairside AI for dental imaging: Pearl — Received U.S. FDA 510(k) clearance for its real-time radiologic aid (“Second Opinion”) in 2022 (2D), with subsequent clearances including pediatric and CBCT (“Second Opinion 3D”). TIME gave “Second Opinion” a special mention on its Best Inventions of 2022 list. Overjet — FDA-cleared for bone-level quantification and detection/outline of caries and calculus (e.g., K210187), with additional clearances expanding capabilities. VideaHealth — Received an FDA 510(k) covering 30+ detections across common dental findings (K232384), including indications for patients ages 3 and up; trade coverage has described elements of this as the first pediatric dental-AI clearance. == Regulations == In the U.S., AI-enabled dental imaging software is generally reviewed via the FDA’s 510(k) pathway. The FDA maintains a public AI-Enabled Medical Devices List, which includes numerous medical-imaging AI tools (including dental). Specific dental clearances include Overjet (K210187), VideaHealth (K232384), and Pearl entries such as “Second Opinion 3D” (K243989).

    Read more →
  • Rider Spoke

    Rider Spoke

    Rider Spoke developed by Blast Theory in collaboration with the Mixed Reality Lab was first staged at the Barbican, London in October 2007. Created for cyclists, it combines elements of theatre, performance, game play and state of the art technology. Rider Spoke was built in the IPerG project on the EQUIP architecture. Rider Spoke has since been presented in Athens (2008), Brighton (2008), Budapest (2008), Sydney (2009, Adelaide (2009) and Liverpool (2010).

    Read more →
  • Svelte

    Svelte

    Svelte is a free and open-source component-based front-end software framework and language created by Rich Harris and maintained by the Svelte core team. Svelte is not a monolithic JavaScript library imported by applications: instead, Svelte compiles HTML templates to specialized code that manipulates the DOM directly, which may reduce the size of transferred files and give better client performance. Application code is also processed by the compiler, inserting calls to automatically recompute data and re-render UI elements when the data they depend on is modified. This also avoids the overhead associated with runtime intermediate representations, such as virtual DOM, unlike traditional frameworks (such as React and Vue) which carry out the bulk of their work at runtime, i.e. in the browser. The compiler itself is written in JavaScript. Its source code is licensed under MIT License and hosted on GitHub. Among comparable frontend libraries, Svelte has one of the smallest bundle footprints at merely 2KB. == History == The predecessor of Svelte is Ractive.js, which Rich Harris created in 2013. Version 1 of Svelte was written in JavaScript and was released on 29 November 2016. The name Svelte was chosen by Rich Harris and his coworkers at The Guardian. Version 2 of Svelte was released on 19 April 2018. It set out to correct what the maintainers viewed as mistakes in the earlier version such as replacing double curly braces with single curly braces. Version 3 of Svelte was written in TypeScript and was released on 21 April 2019. It rethought reactivity by using the compiler to instrument assignments behind the scenes. The SvelteKit web framework was announced in October 2020 and entered beta in March 2021. SvelteKit 1.0 was released in December 2022 after two years in development. Version 4 of Svelte was released on 22 June 2023. It was a maintenance release, smaller and faster than version 3. A part of this release was an internal rewrite from TypeScript back to JavaScript, with JSDoc type annotations. This was met with confusion from the developer community, which was addressed by the creator of Svelte, Rich Harris. Version 5 of Svelte was released on October 19, 2024 at Svelte Summit Fall 2024 with Rich Harris cutting the release live while joined by other Svelte maintainers. Svelte 5 was a ground-up rewrite of Svelte, changing core concepts such as reactivity and reusability. Its primary feature, runes, reworked how reactive state is declared and used. Runes are function-like macros that are used to declare a reactive state, or code that uses reactive states. These runes are used by the compiler to indicate values that may change and are depended on by other states or the DOM. Svelte 5 also introduces Snippets, which are reusable "snippets" of code that are defined once and can be reused anywhere else in the component. Svelte 5 was initially met with controversy due to its many changes, and thus deprecations caused primarily by runes. However, most of this has subsided since the initial announcement of runes, and the further refining of Svelte 5. Also at Svelte Summit Fall 2024, Ben McCann announced the Svelte CLI under the sv package name on npm. In early 2025, the Svelte team announced Asynchronous Svelte, an experimental feature set centered around asynchronous reactivity in Svelte using await expressions. As of August 2025, the feature is available via an experimental compiler option. This coincided with the experimental release of remote functions, an RPC feature in SvelteKit, Svelte's metaframework. Key early contributors to Svelte became involved with Conduitry joining with the release of Svelte 1, Tan Li Hau joining in 2019, and Ben McCann joining in 2020. Rich Harris and Simon Holthausen joined Vercel to work on Svelte fulltime in 2022. Dominic Gannaway joined Vercel from the React core team to work on Svelte fulltime in 2023. == Syntax == Svelte applications and components are defined in .svelte files, which are HTML files extended with templating syntax that is based on JavaScript and is similar to JSX. Svelte's core features are accessed through runes, which syntactically look like functions, but are used as macros by the compiler. These runes include: The $state rune, used for declaring a reactive state value The $derived rune, used for declaring reactive state derived from one or more states The $effect rune, used for declaring code that reruns whenever its dependencies change Starting with Svelte 5, the framework introduced a significant reactivity overhaul that replaces the previous `$:` reactive declarations with new runes such as $state, $derived, and $effect. The $effect rune is now used for post-render operations without modifying state, while $derived is used for computations that depend on other reactive values. This change aims to simplify the mental model of reactivity and make component logic more explicit. Additionally, the { JavaScript code } syntax can be used for templating in HTML elements and components, similar to template literals in JavaScript. This syntax can also be used in element attributes for uses such as two-way data binding, event listeners, and CSS styling. A Todo List example made in Svelte is below: == Associated projects == The Svelte maintainers created SvelteKit as the official way to build projects with Svelte. It is a Next.js/Nuxt-style full-stack framework that dramatically reduces the amount of code that gets sent to the browser. The maintainers had previously created Sapper, which was the predecessor of SvelteKit. The Svelte maintainers also maintain a number of integrations for popular software projects under the Svelte organization including integrations for Vite, Rollup, Webpack, TypeScript, VS Code, Chrome Developer Tools, ESLint, and Prettier. A number of external projects such as Storybook have also created integrations with Svelte and SvelteKit. == Influence == Vue.js modeled its API and single-file components after Ractive.js, the predecessor of Svelte. == Adoption == Svelte is widely praised by developers. Taking the top ranking in multiple large scale developer surveys, it was chosen as the Stack Overflow 2021 most loved web framework and 2020 State of JS frontend framework with the most satisfied developers. Recent surveys continue to show Svelte's strong developer satisfaction, with the 2024 State of JS survey maintaining its position among the most praised frontend frameworks. The 2024 Stack Overflow Developer Survey reported that 73% of developers who used Svelte want to continue working with it, and noted that Stack Overflow's own team used Svelte for building their 2024 Developer Survey results site. Svelte has been adopted by a number of high-profile web companies including The New York Times, Google, Apple, Spotify, Radio France, Square, Yahoo, ByteDance, Rakuten, Bloomberg, Reuters, Ikea, Facebook, Logitech, and Brave. A community group of primarily non-maintainers, known as the Svelte Society, run the Svelte Summit conference, write a Svelte newsletter, host a Svelte podcast, and host a directory of Svelte tooling, components, and templates.

    Read more →
  • Audience capture

    Audience capture

    Audience capture is the phenomenon where an influencer is affected by their audience, catering to it with what they believe it wants to hear or is willing to pay for. This creates a positive feedback loop, which can lead the influencer to express more extreme views and behaviors. A famous example of audience capture can be found in the story of the online influencer Nicholas Perry, known as Nikocado Avocado. Perry started off on YouTube with videos of himself playing the violin and supporting veganism. He then shifted to videos of himself eating known as mukbang. Audience capture led him to more and more extreme eating leading him in turn to obesity and poor health. The effect can cause ideological media creators to become more politically radical, based on the feedback of their audience.

    Read more →
  • Logogen model

    Logogen model

    The logogen model of 1969 is a model of speech recognition that uses units called "logogens" to explain how humans comprehend spoken or written words. Logogens are a vast number of specialized recognition units, each able to recognize one specific word. This model provides for the effects of context on word recognition. == Overview == The word logogen can be traced back to the Greek-language word logos, which means "word", and genus, which means "birth". British scientist John Morton's logogen model was designed to explain word recognition using a new type of unit known as a logogen. A critical element of this theory is the involvement of lexicons, or specialized aspects of memory that include semantic and phonemic information about each item that is contained in memory. A given lexicon consists of many smaller, abstract items known as logogens. Logogens contain a variety of properties about given word such as their appearance, sound, and meaning. Logogens do not store words within themselves, but rather they store information that is specifically necessary for retrieval of whatever word is being searched for. A given logogen will become activated by psychological stimuli or contextual information (words) that is consistent with the properties of that specific logogen and when the logogen's activation level rises to or above its threshold level, the pronunciation of the given word is sent to the output system. Certain stimuli can affect the activation levels of more than one word at a time, usually involving words that are similar to one another. When this occurs, whichever of the words' activation levels reaches the threshold level, it is that word that is then sent to the output system with the subject remaining unaware of any partially excited logogens. This assumption was made by Marslen-Wilson and Welch (1978), who added to the model some assumptions of their own in order to account for their experimental results. They also assumed that the analysis of phonetic input can only become available to other parts of the system by process of how the input affects the logogen system. Finally, Marslen-Wilson and Welch assume that the first syllable of a given word will increase the activation level of a given logogen more than those of the latter syllables, which supported the data found at the time. == Analysis == The logogen model can be used to help linguists explain particular occurrences in the human language. The most-helpful application of the model is to show how one accesses words and their meanings in the lexicon. The word-frequency effect is best explained by the logogen model in that words (or logogens) that have a higher frequency (or are more common) have a lower threshold. This means that they require less perceptual power in the brain to be recognized and decoded from the lexicon and are recognized faster than those words that are less common. Also, with high-frequency words, the recovery from lowering the item's threshold is less fulfilled compared to low-frequency words so less sensory information is needed for that particular item's recognition. There are ways to lower thresholds, such as repetition and semantic priming. Also, each time a word is encountered through these methods, the threshold for that word is temporarily lowered partially because of its recovering ability. This model also conveys that specific concrete words are recalled better because they use images and logogens, whereas abstract words are not as easily recalled well because they only use logogens, hence showing the difference in thresholds between these two types of words. At the time of its conception, Morton's logogen model was one of the most influential models in springing up other parallel word access models and served as the essential basis for these subsequent models. Morton's model also strongly influenced other contemporary theories on lexical access. However, despite the advantages that the logogen theory presents, it also displays some negative facets. First and foremost, the logogen model does not explain all occurrences in language, such as the introduction of new words or non-words into a person's lexicon. Also, because of the distinctive model application, it may vary in its effectiveness in different languages. == Criticisms == While this model does a reasonable job of understanding the underlying semantics of many aspects in psycholinguistics, there are some flaws that have been pointed out in the logogen model. It has been argued that the prior stimulus patterns that have been seen in the logogen theory are not centrally localized in the logogen itself but are actually distributed throughout the different pathways over which the stimulus is being processed. What this directs at is that the notion and proliferation of logogens was due to modality. In essence, the logogen is unnecessary in the idea of attaining the title of being a recognition unit because of the variety of pathways that it is open to, not just logogens. Another criticism has been that this model essentially ignores larger and more critical structures in language and phonetics such as the different syntactic rules or grammatical construction that innately exists in language. Since this model overtly limits itself to the scope of lexical access then this model is seen as biased and misunderstood. To many psychologists, the logogen model does not meet the functional or representational adequacy that a theory should include to sufficiently comprehend language. Also, another criticism is that the logogen theory was supposed to predict that stimulus degradation should affect priming and word frequency in humans. However, many psychologists have conducted studies and researched the model to show that only priming and not word frequency is interacted with stimulus degradation. Priming is supposed to deteriorate a stimulus because it postulates that the semantic characteristics of previously known words are fed back into the detector of a person which in turn raises the threshold of related items. In word frequency, stimulus degradation is supposed to occur because it postulates that familiar words have lower thresholds than their low-frequency counterparts. However, in studies, priming is the only structure that does show observable and notable stimulus decadence. Even though the logogen theory has many unfilled holes, Morton was a revolutionary of his field whose speculation and research has opened up a remarkable era of psycholinguistics. == Other models to consider == cohort model – This model was proposed by Marslen-Wilson and was designed specifically to account for auditory word recognition. It works by breaking the word down and states that when a word is heard all words that begin with the first sound of the target word are activated. This set of words is considered the cohort. Once the first cohort has been activated, the other information, or sounds in the word narrow down the choices. The person recognizes the word when you are left with a single choice; this is considered the "recognition point". checking model – This model was developed by Norris in 1986. In this particular model, he took the approach that any word that partially matches the input is analyzed and checked to see if it fits with the context of the situation. interactive-activation model – This model is considered a connectionist model. Proposed by McClelland and Rumelhart in the 1981 to 1982 period, it is based around nodes, which are visual features, and positions of letters within a given word. They also act as word detectors which have inhibitory and excitatory connections between them. This model starts with first letter and suggests that all the words with that first letter are activated at first and then going through the word one can determine what the word is they are looking at. The main principle is that mental phenomena can be described by interconnected networks of simple units. verification model – The model was developed by Curtis Becker in 1970. The main idea is that a small number of candidates that are activated in parallel are subject to a serial-verification process. This model starts the word-recognition process with a basic representation of the stimulus. Then, sensory trace, consisting of line features is used to activate word detectors. When an acceptable number of detectors are activated these are used to generate a search set. These items are drawn from the lexicon on the basis of similarity to the sensory trace, which help with the identity of the stimulus. Then, in a serial process the candidates are compared to the representation of the sensory-trace input. == Related concepts == word frequency – This is the belief that the speed and accuracy with which a word is recognized is related to how frequently the word occurs in our language. Each logogen has a threshold (for identification) and words with higher frequencies have lower thresholds. Words with higher freq

    Read more →
  • Fansly

    Fansly

    Fansly is a subscription-based social media platform that allows content creators to monetize exclusive content, including photos, videos, live streams, and direct messages. Operated by Select Media LLC, the platform is headquartered in Baltimore, Maryland. While the platform hosts a variety of content genres, it is primarily known for adult content and is frequently compared to OnlyFans. == History == Fansly was launched in 2020 by Micheal Etelis under Select Media LLC, which was incorporated in February 2020. The platform also operates through CY Media LTD, registered in Kamares, Cyprus, established in May 2021. The company has remained privately held with no disclosed external funding rounds or official valuation, operating as a bootstrapped entity. Based on Fansly's social media presence, which was created in November 2020, the platform did not begin gaining traction until early 2021 when creators started to become concerned about potential content policy changes at OnlyFans. In August 2021, OnlyFans announced it would ban sexually explicit content effective October 2021, citing pressure from banks involved in its payment processing. Although OnlyFans reversed the decision six days later, the announcement triggered a massive influx of users to Fansly; the platform received nearly 4,000 new creator applications in a single hour, causing its servers to crash from the surge in traffic. By August 21, 2021, Fansly had reached 2.1 million users. == Features and business model == Fansly operates as a B2C marketplace, taking a 20% commission on all transactions conducted on the platform, with creators retaining the remaining 80%. This commission rate is the same as that charged by its main competitor, OnlyFans. A distinguishing feature of Fansly is its tiered subscription model, which allows creators to set multiple subscription levels at different price points, each offering different perks such as exclusive content, chat access, or custom requests. By contrast, OnlyFans historically relied on a single-tier subscription model. Revenue streams on the platform include recurring subscriptions, one-time pay-per-view content purchases, tips, paid messaging, and live-streaming fees. The platform also features an algorithmic "For You" feed that helps users discover new creators, addressing a limitation of competitors that lack internal content promotion mechanisms. Additional features include content watermarking, geolocation blocking to control where content is visible, two-factor authentication, community polls, 24-hour stories, and social media integration with platforms such as Twitter and Twitch. Payouts are processed within one to two business days and support multiple methods, including bank transfers, Skrill, Paxum, and cryptocurrency. In December 2025, Fansly expanded its live-streaming capabilities, introducing ticketed access, private list gating, configurable chat permissions, stream goals, and interactive device integration. == Controversies == === OnlyFans anti-competitive allegations === In August 2022, a series of lawsuits were filed in the United States alleging that OnlyFans had bribed employees of Meta Platforms to place Instagram accounts of creators who also sold content on competitor platforms, including Fansly, onto a terrorist blacklist. The lawsuits alleged that adult performers had traffic driven away from their Instagram accounts after being falsely tagged as terror-related. OnlyFans denied awareness of such activity. The plaintiffs withdrew the bribery claim in July 2023, and the case was dismissed in August 2023. === Privacy class action === In June 2025, Select Media LLC (operating as Fansly) was the subject of a digital privacy class action lawsuit filed in Massachusetts District Court. The lawsuit alleged that the platform secretly collected and shared users' sensitive viewing data with Google and other third parties without consent. The case was brought on behalf of an estimated class of over 10,000 users across multiple states.

    Read more →
  • IAmAnas

    IAmAnas

    #IAmAnas (I Am Anas) is a Twitter hashtag and social media campaign that started in 2015. Users tweeted to express support for the undercover investigative works of Ghanaian journalist Anas Aremeyaw Anas. The campaign restarted in 2018 when the Ghanaian MP and financier of the New Patriotic Party, Kennedy Agyapong, announced his intention to reveal the identity of Anas following the journalist's exposé of corruption at the Ghana Football Association. Anas maintains that "being anonymous has always been his secret weapon." Pictures purported to be of Anas were first released by a TV station owned by Agyapong, and were quickly picked up by other media houses. At least one person, a Dutch-Brazilian model, has claimed ownership of one picture that was released, and has threatened legal action against Agyapong for possibly putting his life in danger. In response to Agyapong, social media users retweeted photos of themselves, random people, or even comic images of entities that resemble the trademark covered face of Anas. When the hashtag first began in 2015, along with other popular uses of the journalist's name, Elizabeth Ohene wrote an article about Ghanaians use of humour in response to dealing with the expose of government corruption. "I do not know when these words will make it into Wikipedia or the Oxford English Dictionary but for the moment you can take it from me that: To go undercover is to anas, to make secret recordings is to anas-anas, to wear disguises is to do an anas, to be caught in the act is to be anased. To have someone exposed taking bribes is to have that person being given the full Anas Aremeyaw Anas."

    Read more →
  • Go-box

    Go-box

    Go-box is a name used for a number of electronic devices. The "Go-Box" is often a box, crate, carry-case, modified briefcase or similar construction containing electronic equipment pre-setup and ready to function. The box can then be taken into the field or placed at a remote site with minimal effort. These are often used by radio amateurs (or "Hams") for emergency communications, experimental work, or field communications. This has also led to similar equipment being used in the Emergency Services, utility companies, military, and government agencies. A search of the YouTube website can reveal a number of ideas for these devices mostly built by people at home. Terms created after the use of "go-box" include the "go-bag" which is an 'essentials' bag of items needed for evacuations or quick departures, i.e. medicines, clothes, torch, Broadcast radio receiver, batteries, etc. In Austria it is a radio transmitter used in trucks as part of the Videomaut toll collection system. One use of the term in the United States it is a device which is supposed to change traffic signals from red to green. U.S. Fire trucks have a similar device, called an Opticon, that uses an infrared beam. Two residents of Miami, Florida, were arrested for selling fake go-boxes online. Several hundred were sold, prices ranging from $69 to $150. In reality, the boxes contained nothing more than strobe lights.

    Read more →
  • MegaHAL

    MegaHAL

    MegaHAL is a computer conversation simulator, or "chatterbot", created by Jason Hutchens. == Background == In 1996, Jason Hutchens entered the Loebner Prize Contest with HeX, a chatterbot based on ELIZA. HeX won the competition that year and took the $2000 prize for having the highest overall score. In 1998, Hutchens again entered the Loebner Prize Contest with his new program, MegaHAL. MegaHAL made its debut in the 1998 Loebner Prize Contest. Like many chatterbots, the intent is for MegaHAL to appear as a human fluent in a natural language. As a user types sentences into MegaHAL, MegaHAL will respond with sentences that are sometimes coherent and at other times complete gibberish. MegaHAL learns as the conversation progresses, remembering new words and sentence structures. It will even learn new ways to substitute words or phrases for other words or phrases. Many would consider conversation simulators like MegaHAL to be a primitive form of artificial intelligence. However, MegaHAL doesn't understand the conversation or even the sentence structure. It generates its conversation based on sequential and mathematical relationships. In the world of conversation simulators, MegaHAL is based on relatively old technology and could be considered primitive. However, its popularity has grown due to its humorous nature; it has been known to respond with twisted or nonsensical statements that are often amusing. == Theory of Operation == MegaHal is based at least in part on a so-called "hidden Markov Model", so that the first thing that Megahal does when it "trains" on a script or text is to build a database of text fragments encompassing every possible subset of perhaps 4, 5, or even 6 consecutive words, so that for example - if MegaHal trains on the Declaration of Independence, then MegaHal will build a database containing text fragments such as "When in the course", "in the course of", "the course of human", "course of human events", "of human events, one", "human events, one people", and so on. Then if Megahal is fed another text, such has "Superman, Yes! It's Superman - he can change the course of mighty rivers, bend steel with his bare hands - and who disguised at Clark Kent …" IT MIGHT induce Megahal to apparently bemuse itself to proffer whether Superman can change the course of human events, or something else altogether - such as some rambling about "when in the course of mighty rivers", and so on. Thus likewise - if a phrase like "the White house said" comes up a lot in some text; then Megahal's ability to switch randomly between different contexts which otherwise share some similarity can result at times in some surprising lucidity, or else it might otherwise seem quite bizarre. == Examples == There are some sentences that MegaHAL generated: CHESS IS A FUN SPORT, WHEN PLAYED WITH SHOT GUNS. and COWS FLY LIKE CLOUDS BUT THEY ARE NEVER COMPLETELY SUCCESSFUL. == Distribution == MegaHAL is distributed under the Unlicense. Its source code can be downloaded from the Github repository.

    Read more →
  • Daylight Computer Co.

    Daylight Computer Co.

    Daylight Computer Co. is a Public Benefit Company that designs and manufactures devices that do not emit blue light or flicker. Anjan Katta, the company's founder and CEO, stated that he started the company to reduce his personal eyestrain and the distraction that came with conventional devices. The first device that the company released is the Daylight DC-1, a tablet using a monochrome transflective liquid-crystal display designed for outdoor use, while also being usable indoors with an amber backlight. The company's goal is to create a "healthy computer." == History == In June 2018, Anjan Katta began the process of designing a device that did not emit blue light or flicker. He was inspired by the Kindle stating that he wanted to create a device that was, "an analog object that happens to have digital magical capabilities.” By 2020, he created his first scientific prototype and created the first proof-of-concept prototype in 2021. In the early research and development stages of the device, Katta had spent $300,000 of his own money. Eventually, Katta obtained a $12 million investment from current and former executives of companies such as Oculus, Pinterest, and Dropbox. In 2024, the company held a launch party at the Conservatory of Flowers in Golden Gate Park for the Daylight DC1, the company's first device. The event had roughly 200 attendees. Later that year, Daylight sold out its first run of 5,000 devices. The Daylight DC1 is a 1.2 pound tablet that runs its own operating system, SolOS, based on Android 13. It has a refresh rate of 60 Hz, fast enough to process video. In 2025, the product was demonstrated by Danny Jones on the Joe Rogan Experience. The company has been described by outlets such as Wired and VentureBeat as a "returning computing to hippie ideals" and being a product for "techno-hippies." The company is headquartered in San Francisco, California.

    Read more →
  • Vue.js

    Vue.js

    Vue.js (commonly referred to as Vue; pronounced "view") is an open-source model–view–viewmodel front end JavaScript framework for building user interfaces and single-page applications. It was created by Evan You and is maintained by him and the rest of the active core team members. == Overview == Vue.js features an incrementally adaptable architecture that focuses on declarative rendering and component composition. The core library is focused on the view layer only. Advanced features required for complex applications such as routing, state management and build tooling are offered via officially maintained supporting libraries and packages. Vue.js allows for extending HTML with HTML attributes called directives. The directives offer functionality to HTML applications, and come as either built-in or user defined directives. == History == Vue was created by Evan You after working for Google using AngularJS in several projects. He later summed up his thought process: "I figured, what if I could just extract the part that I really liked about Angular and build something really lightweight." The first source code commit to the project was dated July 2013, at which time it was originally named "Seed". Vue was first publicly announced the following February, in 2014. Version names are often derived from manga and anime series, with the first letters arranged in alphabetical order. === Versions === When a new major is released i.e. v3.y.z, the last minor i.e. 2.x.y will become a LTS release for 18 months (bug fixes and security patches) and for the following 18 months will be in maintenance mode (security patches only). Vue 3 was officially released in September 2020. According to the State of Vue.js Report 2025, 96% of surveyed developers reported having used Vue 3.x. However, 35% also indicated that they used Vue 2.7.x in the past year, reflecting continued reliance on Vue 2 despite its end of support. The report also noted that more than a quarter of respondents encountered challenges when migrating from Vue 2 to Vue 3. === State management evolution === 2015 - Vuex introduced as official state management solution 2021 - Pinia development begins as Vuex 5 experiment 2022 - Pinia becomes officially recommended for new projects 2023 - Vue team announces Vuex maintenance mode transition According to the State of Vue.js Report 2025, the Vue's core team recommendation is reflected in developer adoption–over 80% of surveyed developers reported using Pinia while Vuex still had 38.4% usage, indicating ongoing reliance on the older library. == Features == === Components === Vue components extend basic HTML elements to encapsulate reusable code. At a high level, components are custom elements to which the Vue's compiler attaches behavior. In Vue, a component is essentially a Vue instance with pre-defined options. The code snippet below contains an example of a Vue component. The component presents a button and prints the number of times the button is clicked: === Templates === Vue uses an HTML-based template syntax that allows binding the rendered DOM to the underlying Vue instance's data. All Vue templates are valid HTML that can be parsed by specification-compliant browsers and HTML parsers. Vue compiles the templates into virtual DOM render functions. A virtual Document Object Model (or "DOM") allows Vue to render components in its memory before updating the browser. Combined with the reactivity system, Vue can calculate the minimal number of components to re-render and apply the minimal amount of DOM manipulations when the app state changes. Vue users can use template syntax or choose to directly write render functions using hyperscript either through function calls or JSX. Render functions allow applications to be built from software components. === Reactivity === Vue features a reactivity system that uses plain JavaScript objects and optimized re-rendering. Each component keeps track of its reactive dependencies during its render, so the system knows precisely when to re-render, and which components to re-render. === Transitions === Vue provides a variety of ways to apply transition effects when items are inserted, updated, or removed from the DOM. This includes tools to: Automatically apply classes for CSS transitions and animations Integrate third-party CSS animation libraries, such as Animate.css Use JavaScript to directly manipulate the DOM during transition hooks Integrate third-party JavaScript animation libraries, such as Velocity.js When an element wrapped in a transition component is inserted or removed, this is what happens: Vue will automatically sniff whether the target element has CSS transitions or animations applied. If it does, CSS transition classes will be added/removed at appropriate timings. If the transition component provided JavaScript hooks, these hooks will be called at appropriate timings. If no CSS transitions/animations are detected and no JavaScript hooks are provided, the DOM operations for insertion and/or removal will be executed immediately on next frame. === Routing === A traditional disadvantage of single-page applications (SPAs) is the inability to share links to the exact "sub" page within a specific web page. Because SPAs serve their users only one URL-based response from the server (it typically serves index.html or index.vue), bookmarking certain screens or sharing links to specific sections is normally difficult if not impossible. To solve this problem, many client-side routers delimit their dynamic URLs with a "hashbang" (#!), e.g. page.com/#!/. However, with HTML5 most modern browsers support routing without hashbangs. Vue provides an interface to change what is displayed on the page based on the current URL path – regardless of how it was changed (whether by emailed link, refresh, or in-page links). Additionally, using a front-end router allows for the intentional transition of the browser path when certain browser events (i.e. clicks) occur on buttons or links. Vue itself doesn't come with front-end hashed routing. But the open-source "vue-router" package provides an API to update the application's URL, supports the back button (navigating history), and email password resets or email verification links with authentication URL parameters. It supports mapping nested routes to nested components and offers fine-grained transition control. With Vue, developers are already composing applications with small building blocks building larger components. With vue-router added to the mix, components must merely be mapped to the routes they belong to, and parent/root routes must indicate where children should render. The code above: Sets a front-end route at websitename.com/user/. Which will render in the User component defined in (const User...) Allows the User component to pass in the particular id of the user which was typed into the URL using the $route object's params key: $route.params.id. This template (varying by the params passed into the router) will be rendered into inside the DOM's div#app. The finally generated HTML for someone typing in: websitename.com/user/1 will be: == Ecosystem == The core library comes with tools and libraries both developed by the core team and contributors. === Official tooling === Devtools – Browser devtools extension for debugging Vue.js applications Vite – Standard Tooling for rapid Vue.js development Vue Loader – a webpack loader that allows the writing of Vue components in a format called Single-File Components (SFCs) Vue.js Plugins Collection - Collection of almost 100 plugins and ecosystem libraries across various categories. === Official libraries === Vue Router – The official router, suitable for building SPAs Pinia – The official state management solution === Video courses === Vue School – Expert-led courses on Vue.js and its ecosystem. === State management libraries === Pinia – Official state management solution with modular architecture Vuex – Legacy state management library, now in maintenance mode VueUse – Collection of 200+ composition utilities including state management helpers === Community & Core Teams Resources === The State of Vue.js Report - A comprehensive publication about Vue.js created since 2017 by Monterail, Vue & Nuxt Official Partner. Each edition includes unique data from developer survey, key ecosystem trends and case studies. The latest 5th edition released in March 2025 was co-created with Evan You and Vue&Nuxt Core Teams. Although the Vue.js Ecosystem is generally very well-developed, developers point to some ecosystem gaps as one of the most important thing missing (as of March 2025 Developer Survey in the State of Vue.js Report 2025). 22% of respondents mentioned the lack of robust, official component libraries like MUI or Radix, and the need for better testing utilities. There was also demand for more modular, enterprise-ready solutions for dashboards, e-commerce, and animation libraries similar to Fr

    Read more →