AI Avatar Generator From Photo

AI Avatar Generator From Photo — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

• 

  Control system

  A control system manages, commands, directs, or regulates the behavior of other devices or systems using control loops. It can range from a single home heating controller using a thermostat controlling a domestic boiler to large industrial control systems which are used for controlling processes or machines. The control systems are designed via control engineering process. For continuously modulated control, a feedback controller is used to automatically control a process or operation. The control system compares the value or status of the process variable (PV) being controlled with the desired value or setpoint (SP), and applies the difference as a control signal to bring the process variable output of the plant to the same value as the setpoint. For sequential and combinational logic, software logic, such as in a programmable logic controller, is used. == Open-loop and closed-loop control == == Feedback control systems == == Logic control == Logic control systems for industrial and commercial machinery were historically implemented by interconnected electrical relays and cam timers using ladder logic. Today, most such systems are constructed with microcontrollers or more specialized programmable logic controllers (PLCs). The notation of ladder logic is still in use as a programming method for PLCs. Logic controllers may respond to switches and sensors and can cause the machinery to start and stop various operations through the use of actuators. Logic controllers are used to sequence mechanical operations in many applications. Examples include elevators, washing machines and other systems with interrelated operations. An automatic sequential control system may trigger a series of mechanical actuators in the correct sequence to perform a task. For example, various electric and pneumatic transducers may fold and glue a cardboard box, fill it with the product and then seal it in an automatic packaging machine. PLC software can be written in many different ways – ladder diagrams, SFC (sequential function charts) or statement lists. == On–off control == On–off control uses a feedback controller that switches abruptly between two states. A simple bi-metallic domestic thermostat can be described as an on-off controller. When the temperature in the room (PV) goes below the user setting (SP), the heater is switched on. Another example is a pressure switch on an air compressor. When the pressure (PV) drops below the setpoint (SP) the compressor is powered. Refrigerators and vacuum pumps contain similar mechanisms. Simple on–off control systems like these can be cheap and effective. == Linear control == == Fuzzy logic == Fuzzy logic is an attempt to apply the easy design of logic controllers to the control of complex continuously varying systems. Basically, a measurement in a fuzzy logic system can be partly true. The rules of the system are written in natural language and translated into fuzzy logic. For example, the design for a furnace would start with: "If the temperature is too high, reduce the fuel to the furnace. If the temperature is too low, increase the fuel to the furnace." Measurements from the real world (such as the temperature of a furnace) are fuzzified and logic is calculated arithmetic, as opposed to Boolean logic, and the outputs are de-fuzzified to control equipment. When a robust fuzzy design is reduced to a single, quick calculation, it begins to resemble a conventional feedback loop solution and it might appear that the fuzzy design was unnecessary. However, the fuzzy logic paradigm may provide scalability for large control systems where conventional methods become unwieldy or costly to derive. Fuzzy electronics is an electronic technology that uses fuzzy logic instead of the two-value logic more commonly used in digital electronics. == Physical implementation == The range of control system implementation is from compact controllers often with dedicated software for a particular machine or device, to distributed control systems for industrial process control for a large physical plant. Logic systems and feedback controllers are usually implemented with programmable logic controllers. The Broadly Reconfigurable and Expandable Automation Device (BREAD) is a recent framework that provides many open-source hardware devices which can be connected to create more complex data acquisition and control systems.

  Read more →
• 

  Knowledge organization

  Knowledge organization (KO), organization of knowledge, organization of information, or information organization is an intellectual discipline concerned with activities such as document description, indexing, and classification that serve to provide systems of representation and order for knowledge and information objects. According to The Organization of Information by Joudrey and Taylor, information organization: examines the activities carried out and tools used by people who work in places that accumulate information resources (e.g., books, maps, documents, datasets, images) for the use of humankind, both immediately and for posterity. It discusses the processes that are in place to make resources findable, whether someone is searching for a single known item or is browsing through hundreds of resources just hoping to discover something useful. Information organization supports a myriad of information-seeking scenarios. Issues related to knowledge sharing can be said to have been an important part of knowledge management for a long time. Knowledge sharing has received a lot of attention in research and business practice both within and outside organizations and its different levels. Sharing knowledge is not only about giving it to others, but it also includes searching, locating, and absorbing knowledge. Unawareness of the employees' work and duties tends to provoke the repetition of mistakes, the waste of resources, and duplication of the same projects. Motivating co-workers to share their knowledge is called knowledge enabling. It leads to trust among individuals and encourages a more open and proactive relationship that grants the exchange of information easily. Knowledge sharing is part of the three-phase knowledge management process which is a continuous process model. The three parts are knowledge creation, knowledge implementation, and knowledge sharing. The process is continuous, which is why the parts cannot be fully separated. Knowledge creation is the consequence of individuals' minds, interactions, and activities. Developing new ideas and arrangements alludes to the process of knowledge creation. Using the knowledge which is present at the company in the most effective manner stands for the implementation of knowledge. Knowledge sharing, the most essential part of the process for our topic, takes place when two or more people benefit by learning from each other. Traditional human-based approaches performed by librarians, archivists, and subject specialists are increasingly challenged by computational (big data) algorithmic techniques. KO as a field of study is concerned with the nature and quality of such knowledge-organizing processes (KOP) (such as taxonomy and ontology) as well as the resulting knowledge organizing systems (KOS). == Theoretical approaches == === Traditional approaches === Among the major figures in the history of KO are Melvil Dewey (1851–1931) and Henry Bliss (1870–1955). Dewey's goal was an efficient way to manage library collections; not an optimal system to support users of libraries. His system was meant to be used in many libraries as a standardized way to manage collections. The first version of this system was created in 1876. An important characteristic in Henry Bliss' (and many contemporary thinkers of KO) was that the sciences tend to reflect the order of Nature and that library classification should reflect the order of knowledge as uncovered by science: The implication is that librarians, in order to classify books, should know about scientific developments. This should also be reflected in their education: Again from the standpoint of the higher education of librarians, the teaching of systems of classification ... would be perhaps better conducted by including courses in the systematic encyclopedia and methodology of all the sciences, that is to say, outlines which try to summarize the most recent results in the relation to one another in which they are now studied together. ... (Ernest Cushing Richardson, quoted from Bliss, 1935, p. 2) Among the other principles, which may be attributed to the traditional approach to KO are: Principle of controlled vocabulary Cutter's rule about specificity Hulme's principle of literary warrant (1911) Principle of organizing from the general to the specific Today, after more than 100 years of research and development in LIS, the "traditional" approach still has a strong position in KO and in many ways its principles still dominate. === Facet analytic approaches === The date of the foundation of this approach may be chosen as the publication of S. R. Ranganathan's colon classification in 1933. The approach has been further developed by, in particular, the British Classification Research Group. The best way to explain this approach is probably to explain its analytico-synthetic methodology. The meaning of the term "analysis" is: breaking down each subject into its basic concepts. The meaning of the term synthesis is: combining the relevant units and concepts to describe the subject matter of the information package in hand. Given subjects (as they appear in, for example, book titles) are first analyzed into a few common categories, which are termed "facets". Ranganathan proposed his PMEST formula: Personality, Matter, Energy, Space and Time: Personality is the distinguishing characteristic of a subject. Matter is the physical material of which a subject may be composed. Energy is any action that occurs with respect to the subject. Space is the geographic component of the location of a subject. Time is the period associated with a subject. === The information retrieval tradition (IR) === Important in the IR-tradition have been, among others, the Cranfield experiments, which were founded in the 1950s, and the TREC experiments (Text Retrieval Conferences) starting in 1992. It was the Cranfield experiments, which introduced the measures "recall" and "precision" as evaluation criteria for systems efficiency. The Cranfield experiments found that classification systems like UDC and facet-analytic systems were less efficient compared to free-text searches or low level indexing systems ("UNITERM"). The Cranfield I test found, according to Ellis (1996, 3–6) the following results: Although these results have been criticized and questioned, the IR-tradition became much more influential while library classification research lost influence. The dominant trend has been to regard only statistical averages. What has largely been neglected is to ask: Are there certain kinds of questions in relation to which other kinds of representation, for example, controlled vocabularies, may improve recall and precision? === User-oriented and cognitive views === The best way to define this approach is probably by method: Systems based upon user-oriented approaches must specify how the design of a system is made on the basis of empirical studies of users. User studies demonstrated very early that users prefer verbal search systems as opposed to systems based on classification notations. This is one example of a principle derived from empirical studies of users. Adherents of classification notations may, of course, still have an argument: That notations are well-defined and that users may miss important information by not considering them. Folksonomies is a recent kind of KO based on users' rather than on librarians' or subject specialists' indexing. === Bibliometric approaches === These approaches are primarily based on using bibliographical references to organize networks of papers, mainly by bibliographic coupling (introduced by Kessler 1963) or co-citation analysis ( independently suggested by Marshakova 1973 and Small 1973). In recent years it has become a popular activity to construe bibliometric maps as structures of research fields. Two considerations are important in considering bibliometric approaches to KO: The level of indexing depth is partly determined by the number of terms assigned to each document. In citation indexing this corresponds to the number of references in a given paper. On the average, scientific papers contain 10–15 references, which provide quite a high level of depth. The references, which function as access points, are provided by the highest subject-expertise: The experts writing in the leading journals. This expertise is much higher than that which library catalogs or bibliographical databases typically are able to draw on. === The domain analytic approach === Domain analysis is a sociological-epistemological standpoint that advocates that the indexing of a given document should reflect the needs of a given group of users or a given ideal purpose. In other words, any description or representation of a given document is more or less suited to the fulfillment of certain tasks. A description is never objective or neutral, and the goal is not to standardize descriptions or make one description once and for all for different target groups. The develo

  Read more →
• 

  Single source of truth

  In information science and information technology, single source of truth (SSOT) architecture, or single point of truth (SPOT) architecture, for information systems is the practice of structuring information models and associated data schemas such that every data element is mastered (or edited) in only one place, providing data normalization to a canonical form (for example, in database normalization or content transclusion). There are several scenarios with respect to copies and updates: The master data is never copied and instead only references to it are made; this means that all reads and updates go directly to the SSOT. The master data is copied but the copies are only read and only the master data is updated; if requests to read data are only made on copies, this is an instance of CQRS. The master data is copied and the copies are updated; this needs a reconciliation mechanism when there are concurrent updates. Updates on copies can be thrown out whenever a concurrent update is made on the master, so they are not considered fully committed until propagated to the master. (many blockchains work that way.) Concurrent updates are merged. (if an automatic merge fails, it could fall back on another strategy, which could be the previous strategy or something else like manual intervention, which most source version control systems do.) The advantages of SSOT architectures include easier prevention of mistaken inconsistencies (such as a duplicate value/copy somewhere being forgotten), and greatly simplified version control. Without a SSOT, dealing with inconsistencies implies either complex and error-prone consensus algorithms, or using a simpler architecture that's liable to lose data in the face of inconsistency (the latter may seem unacceptable but it is sometimes a very good choice; it is how most blockchains operate: a transaction is actually final only if it was included in the next block that is mined). Ideally, SSOT systems provide data that are authentic (and authenticatable), relevant, and referable. Deployment of an SSOT architecture is becoming increasingly important in enterprise settings where incorrectly linked duplicate or de-normalized data elements (a direct consequence of intentional or unintentional denormalization of any explicit data model) pose a risk for retrieval of outdated, and therefore incorrect, information. Common examples (i.e., example classes of implementation) are as follows: In electronic health records (EHRs), it is imperative to accurately validate patient identity against a single referential repository, which serves as the SSOT. Duplicate representations of data within the enterprise would be implemented by the use of pointers rather than duplicate database tables, rows, or cells. This ensures that data updates to elements in the authoritative location are comprehensively distributed to all federated database constituencies in the larger overall enterprise architecture. EHRs are an excellent class for exemplifying how SSOT architecture is both poignantly necessary and challenging to achieve: it is challenging because inter-organization health information exchange is inherently a cybersecurity competence hurdle, and nonetheless it is necessary, to prevent medical errors, to prevent the wasted costs of inefficiency (such as duplicated work or rework), and to make the primary care and medical home concepts feasible (to achieve competent care transitions). Single-source publishing as a general principle or ideal in content management relies on having SSOTs, via transclusion or (otherwise, at least) substitution. Substitution happens via libraries of objects that can be propagated as static copies which are later refreshed when necessary (that is, when refreshing of the copy-paste or import is triggered by a larger updating event). Component content management systems are a class of content management systems that aim to provide competence on this level. == Implementation == === Ontologic interactions === An acknowledged prerequisite (of the notion that any given single source of truth can exist) is that it depends on the ontologic condition that no more than a single truth (about any particular fact or idea) exists, an assertion that is ontologic in both the IT sense and the general sense of that word. In many instances, this presents no problem (for example, within particular namespaces, or even across them, as long as naming collisions or broader name conflicts are adequately handled). The broadest contexts (and thus thorniest, regarding ontologic discrepancies) require adequate epistemic regime comparison and reconciliation (or at least negotiation or transactional exchanges). An archetypal example of this class of reconciliation is that two theological seminary libraries, from two different religions (X and Y), could exchange information with an SSOT architecture, but the unification of truth would reside on the level of the statement that "religion X asserts that God is purple whereas religion Y asserts that God is green", rather than on the level of "God is purple" or "God is green". === Architectures or architectural features === An ideal implementation of SSOT is rarely possible in most enterprises. This is because many organisations have multiple information systems, each of which needs access to data relating to the same entities (e.g., customer). Often these systems are purchased as commercial off-the-shelf products from vendors and cannot be modified in trivial ways. Each of these various systems therefore needs to store its own version of common data or entities, and therefore each system must retain its own copy of a record (hence immediately violating the SSOT approach defined above). For example, an enterprise resource planning (ERP) system (such as SAP or Oracle e-Business Suite) may store a customer record; the customer relationship management (CRM) system also needs a copy of the customer record (or part of it) and the warehouse dispatch system might also need a copy of some or all of the customer data (e.g., shipping address). In cases where vendors do not support such modifications, it is not always possible to replace these records with pointers to the SSOT. For organisations (with more than one information system) wishing to implement a Single Source of Truth (without modifying all but one master system to store pointers to other systems for all entities), some supporting architectures are: Master data management (MDM) Event store and event sourcing (ES) ==== Master data management (MDM) ==== A master data management system typically serves as the source of truth for an organization's metadata, helping to ensure accuracy and consistency throughout that organizations multiple data sources. Typically the MDM acts as a hub for multiple systems, many of which could allow (be the source of truth for) updates to different aspects of information on a given entity. For example, the CRM system may be the "source of truth" for most aspects of the customer, and is updated by a call centre operator. However, a customer may (for example) also update their address via a customer service web site, with a different back-end database from the CRM system. The MDM application receives updates from multiple sources, acts as a broker to determine which updates are to be regarded as authoritative (the golden record) and then syndicates this updated data to all subscribing systems. The MDM application normally requires an ESB to syndicate its data to multiple subscribing systems. ==== Event store and event sourcing (ES) ==== In event oriented architectures, it has become increasingly common to find an implementation of the Event Sourcing pattern which stores the system state as an ordered sequence of state changes. To do this, you need an Event Store, a particular type of database designed to hold all the events that change the state of the system. The event store in an Event Sourcing + Command Query Responsibility Separation + Domain Driven Design + Messaging architecture is in fact a "single source of truth", with the additional advantage that it can also act as an Enterprise Service Bus as it can listen directly to the event store for status changes as everything passes by. In addition, by saving all the events, it also plays the role of Data Warehouse. One last advantage is that through this system the Shared Database pattern can be implemented, another technique not mentioned to obtain a single source of truth. ==== Data warehouse (DW) ==== While the primary purpose of a data warehouse is to support reporting and analysis of data that has been combined from multiple sources, the fact that such data has been combined (according to business logic embedded in the data transformation and integration processes) means that the data warehouse is often used as a de facto SSOT. Generally, however, the data available from the data warehouse are not used to update other systems; rather the DW becomes

  Read more →
• 

  Voiceverse NFT plagiarism scandal

  In January 2022, 15—the pseudonymous Massachusetts Institute of Technology (MIT) artificial intelligence researcher and creator of the non-commercial generative artificial intelligence voice synthesis research project 15.ai—discovered that the blockchain-based technology company Voiceverse had plagiarized from their platform. Voiceverse marketed itself as a service that offered AI voice cloning technology that could be purchased and traded as non-fungible tokens (NFTs). Amid heightened controversy over NFTs in the gaming industry, voice actor Troy Baker (who has been described as one of the most famous voice actors in video games) announced his partnership with Voiceverse on January 14, 2022, triggering immediate backlash over concerns about the environmental impact of NFTs, potential for fraud, predatory monetization in video games, and the potential of AI displacing jobs for human voice actors. Later that same day, 15 revealed through server logs that Voiceverse had generated voice lines using 15's free text-to-speech platform, pitch-shifted the audio to make them unrecognizable, and falsely marketed the samples as their own technology before selling them as NFTs. Within an hour of being confronted with evidence, Voiceverse confessed and stated that their marketing team had used 15.ai without proper attribution while rushing to create a technology demo to coincide with Baker's partnership announcement, further exacerbating the already negative reception to the original announcement. In response, 15 replied "Go fuck yourself"; the interaction went viral and garnered a large amount of support for the developer. News publications universally characterized this incident as Voiceverse having "stolen" from 15.ai. The next day, Baker appeared on a podcast and stated that his motivation had been to help independent creators who were unable to afford professional voice actors. Following continued backlash and the plagiarism revelation, Baker ended his partnership with Voiceverse on January 31, 2022. Subsequently, the incident was documented in multiple AI ethics databases, criticisms of predatory monetization in video games, and retrospectives as one of the earliest instances of plagiarism and theft stemming from artificial intelligence during the AI boom. == Background == === Troy Baker === Troy Baker is a prominent voice actor in the video game industry best known for his performances as Joel Miller in The Last of Us franchise. Baker has been described as "ubiquitous" by Polygon, "one of the most high-profile and prolific voice actors in video games" by Eurogamer, and "arguably the most famous voice actor in the gaming industry" by GameGuru. His other prominent roles include voicing Agent John "Jonesy" Jones in Fortnite, Booker DeWitt in BioShock Infinite, and both Batman and Joker in multiple Batman video games. As of October 2025, Baker holds the record for the most acting nominations at the BAFTA Games Awards, with five between 2013 and 2021. === Voiceverse === Voiceverse is a blockchain-based startup founded by the Bored Ape Yacht Club that marketed itself as offering AI voice cloning technology in the form of NFTs. Prior to the announcement of their partnership with Baker, Voiceverse had partnered with LOVO, Inc., an AI voice platform that, according to LOVO, could generate human-like voices. Voiceverse stated that any user who purchases a voice NFT would have unlimited and perpetual access to the voice model, which could be used to create content such as audiobooks, YouTube videos, podcasts, e-learning materials, in-game voice chat, and Zoom calls. Voiceverse promised that buyers would "OWN [sic] all of the IP" of content they created using these voices. Voiceverse's roadmap included plans to release 8,888 initial voice NFTs, a feature to add emotions to existing voices, and the ability for users to mint their own voices as NFTs. Prior to Baker's partnership, Voiceverse had also partnered with voice actors Charlet Chung, who voices D.Va in Overwatch, and Andy Milonakis of The Andy Milonakis Show. === 15.ai === 15.ai is a free web application launched in 2020 that uses artificial intelligence to generate text-to-speech voices of fictional characters from popular media. Created by a pseudonymous artificial intelligence researcher known as 15, who began developing the technology as a freshman during their undergraduate research at MIT, it was an early example of an application of generative artificial intelligence during the initial stages of the AI boom. The platform showed that deep neural networks could generate emotionally expressive speech with only 15 seconds of speech; the name "15.ai" references the creator's statement that a voice can be convincingly cloned with just 15 seconds of audio, as opposed to the tens of hours of data previously required. 15.ai became an Internet phenomenon in early 2021 when content utilizing it went viral on social media and quickly gained widespread use among various Internet fandoms. 15 has emphasized that it remain free and non-commercial; it only requires users to give proper credit when using the service for content creation. === NFTs in the video game industry === By early 2022, NFTs had become highly controversial within the gaming industry. Critics raised concerns about their environmental impact due to the significant energy consumption of blockchain technology. In addition, the prevalence of scams, fraud, and potential money laundering associated with NFT sales, as well as fears that NFTs were a new form of predatory monetization following the increasing frequency of loot boxes, caused vocal pushback from the gaming community. Several major gaming companies had begun exploring NFT integration into their products, though fan backlash had already forced some projects to be cancelled. On December 16, 2021, the developers of S.T.A.L.K.E.R. 2: Heart of Chernobyl announced that they would be including NFTs in the game, but cancelled within an hour of the announcement due to immediate universal backlash. Simultaneously, the rise of AI voice technology raised concerns among voice actors about potential job displacement and the devaluation of their work amidst the voice acting industry's ongoing struggles for better compensation and working conditions. == Partnership announcement and backlash == On January 14, 2022, 1:02 a.m. EST, Baker announced on Twitter that he was partnering with Voiceverse "to explore ways where together we might bring new tools to new creators to make new things, and allow everyone a chance to own & invest in the IP's they create." The announcement concluded with the statement "You can hate. Or you can create." Baker's specific role with Voiceverse remained unclear at the time of the announcement. Along with Baker's announcement, Voiceverse promoted their supposed voice AI technology on Twitter by posting animated videos that featured a cat character created by NFT firm Chubbiverse. The videos concluded with text that read "The Voice Powered By Voiceverse"; Voiceverse stated on Twitter that the voices in the animations had been generated using their own AI voice synthesis technology and presented the videos as a technology demonstration of their voice NFT capabilities. The announcement provoked immediate and widespread backlash from the gaming community. Baker's tweet received thousands of replies and quote retweets (the vast majority of which were negative), far more than the number of likes; Michael McWhertor of Polygon described it as a "textbook example of being ratioed" and commented that reactions had been amplified by the final part of Baker's announcement. Michael Beckwith of Metro called Baker's approach "bizarrely aggressive". Later that day, Baker responded to the backlash by apologizing for his choice of words. He said he appreciated people's thoughts and acknowledged that the "hate/create part might have been a bit antagonistic," calling it a "bad attempt to bring levity". Despite the apology, Baker and his fellow voice actors did not distance themselves from Voiceverse at this point. At the same time, Voiceverse attempted to address the criticisms, stating that they were working to move to more environmentally friendly blockchain technology and that voice actors would receive royalties from NFT sales, with actors benefiting from any increase in NFT value. == Plagiarism revelation == On December 13, 2021, amidst the increasingly negative reactions toward NFTs among the general public, the creator of 15.ai (known pseudonymously as 15) announced that they had "no interest in incorporating NFTs into any aspect of [their] work." On January 14, 2022, 11:17 a.m. EST (10 hours after Baker's initial announcement), 15 commented on the Voiceverse venture, stating that it "sounds like a scam". Two hours later, at 1:20 p.m., 15 explicitly accused Voiceverse of "actively attempting to appropriate [15's] work for [Voiceverse's] own benefit." 15 provided evidence through

  Read more →
• 

  Coolgorilla

  Coolgorilla was one of the earliest software developers that created 3rd party native applications for Apple iPod devices. Coolgorilla was an early adopter of using a sponsorship business model to enable mobile applications to be given away freely. Coolgorilla developed a series of Talking Phrasebooks for iPods in 2006. They partnered with online travel company lastminute.com who sponsored the applications enabling them to be made available to download completely free of charge. As mobile devices became more sophisticated, Coolgorilla developed the Talking Phrasebooks for Sony Ericsson and Nokia Mobile Devices which at the time were considerably noteworthy since the applications used real voice audio translations. With Apple's introduction of the iPhone in 2007, Coolgorilla developed a Web App before having four of the iPhone Talking Phrasebooks available to download from Apple's App Store on the day it opened in 2008. == Almanac in Chronological Order == On 23 December 2005, CoolGorilla, a new start-up, launched a trivia game for the iPod. It was titled "Rock and Pop Quiz". It was a quiz game that tested users' knowledge on bands such as U2, Metallica, Beyonce, and the Beatles. The quiz contained twenty megabytes of audible trivia questions. The free game was compatible with 3rd, 4th and 5th generation iPods, iPod mini and nano. In March 2006, Coolgorilla released "Movie Quiz for iPods" with a price of $5. It was an audio game narrated by New York's DJ Thomas, a radio and television host, voice over artist and event Master of Ceremonies. There were questions on Star Wars, Spiderman, The Godfather, Pulp Fiction, The Matrix, James Bond, and others. The user could keep track of their score. The game included a secret code for players who answered all questions correctly which enabled users to enter their name on the Coolgorilla Hall of Fame. In May 2006, Coolgorilla launched a World Cup Encyclopedia which was released prior to the 2006 FIFA World Cup. It had information on the World Cup schedule, details of every player from every team, every score from every world cup game ever played, stadium details, and manager profiles. It was a free download. In June 2006, Coolgorilla released a series of iPod Phrasebooks in German, Greek, French and Spanish. They were sponsored by lastminute.com and were free. The phrasebooks included common words and phrases for tourists with 750 sound files. They were accessed through the iPod's Notes feature. In April 2007, Coolgorilla released a downloadable version of the Talking Phrasebooks for Nokia and Sony Ericsson mobile devices. French, Spanish, German, Greek, Italian, and Portuguese were produced. The application provided real voice translations. They initially sold for £3 but 3 months later were offered for free. The branding was lastminute.com branding. Apple's iPhone was released at the end of June 2007. Soon after, Coolgorilla released an online all-in-one version of their Talking Phrasebooks for iPhone (Web App). The Phrasebooks were made available online in the form of a web app as iPhone did not yet allow for the download of additional apps. The app provided both text and audio translations in French, Spanish, Portuguese, Italian, German, and Greek. The iPhone translated the phrases using the recordings of real, native voice-over artists. A text translation on screen was also displayed. Apple's App Store opened in July 2008 with approximately 500 native apps available. Four of these Apps were Coolgorilla's Talking Phrasebooks for iPhone (Native Apps). There was French, German, Italian, and Spanish. These Apps carried lastminute.com branding and were available for free download. In the first three weeks following their release, the phrasebooks had over 350,000 downloads. Subsequently, Dutch, Arabic, Mandarin and Cantonese were also released. In October 2008, Coolgorilla released an iPhone London Travel Guide. Coolgorilla featured on NBC News in August 2009. In 2010, FIAT used the Italian Phrasebook to help promote the release of their FIAT 500 in the US. There has been no further activity since.

  Read more →
• 

  Bibliometrician

  A bibliometrician is a researcher or a specialist in bibliometrics. It is near-synonymous with an informetrican (who studies informetrics), a scientometrican (who study scientometrics) and a webometrician, who study webometrics. == Notable bibliometricians == Christine L. Borgman Samuel C. Bradford Blaise Cronin Margaret Elizabeth Egan Eugene Garfield (developer of the Science Citation Index and the Impact factor) Jorge E. Hirsch (developer of the h-index) Alfred J. Lotka Vasily Nalimov Derek J. de Solla Price Ronald Rousseau George Kingsley Zipf

  Read more →
• 

  Data management plan

  A data management plan or DMP is a formal document that outlines how data are to be handled both during a research project, and after the project is completed. The goal of a data management plan is to consider the many aspects of data management, metadata generation, data preservation, and analysis before the project begins; this may lead to data being well-managed in the present, and prepared for preservation in the future. DMPs were originally used in 1966 to manage aeronautical and engineering projects' data collection and analysis, and expanded across engineering and scientific disciplines in the 1970s and 1980s. Up until the early 2000s, DMPs were used "for projects of great technical complexity, and for limited mid-study data collection and processing purposes". In the 2000s and later, E-research and economic policies drove the development and uptake of DMPs. == Importance == Preparing a data management plan before data are collected is claimed to ensure that data are in the correct format, organized well, and better annotated. This could arguably save time in the long term because there is no need to re-organize, re-format, or try to remember details about data. It is also claimed to increase research efficiency since both the data collector and other researchers might be able to understand and use well-annotated data in the future. One component of a data management plan is data archiving and preservation. By deciding on an archive ahead of time, the data collector can format data during collection to make its future submission to a database easier. If data are preserved, they are more relevant since they can be re-used by other researchers. It also allows the data collector to direct requests for data to the database, rather than address requests individually. A frequent argument in favor of preservation is that data that are preserved have the potential to lead to new, unanticipated discoveries, and they prevent duplication of scientific studies that have already been conducted. Data archiving also provides insurance against loss by the data collector. In the 2010s, funding agencies increasingly required data management plans as part of the proposal and evaluation process, despite little or no evidence of their efficacy. == Major components == "There is no general and definitive list of topics that should be covered in a DMP for a research project", and researchers are often left to their own devices as to how to fill out a DMP. === Information about data and data format === A description of data to be produced by the project. This might include (but is not limited to) data that are: Experimental Observational Raw or derived Physical collections Models Simulations Curriculum materials Software Images How will the data be acquired? When and where will they be acquired? After collection, how will the data be processed? Include information about Software used Algorithms Scientific workflows File formats that will be used, justify those formats, and describe the naming conventions used. Quality assurance & quality control measures that will be taken during sample collection, analysis, and processing. If existing data are used, what are their origins? How will the data collected be combined with existing data? What is the relationship between the data collected and existing data? How will the data be managed in the short-term? Consider the following: Version control for files Backing up data and data products Security & protection of data and data products Who will be responsible for management === Metadata content and format === Metadata are the contextual details, including any information important for using data. This may include descriptions of temporal and spatial details, instruments, parameters, units, files, etc. Metadata is commonly referred to as "data about data". Issues to be considered include: How detailed has the metadata to be in order to make the data meaningful? How will the metadata be created and/or captured? Examples include lab notebooks, GPS hand-held units, Auto-saved files on instruments, etc. What format will be used for the metadata? What are the metadata standards commonly used in the respective scientific discipline? There should be justification for the format chosen. === Policies for access, sharing, and re-use === Describe any obligations that exist for sharing data collected. These may include obligations from funding agencies, institutions, other professional organizations, and legal requirements. Include information about how data will be shared, including when the data will be accessible, how long the data will be available, how access can be gained, and any rights that the data collector reserves for using data. Address any ethical or privacy issues with data sharing Address intellectual property & copyright issues. Who owns the copyright? What are the institutional, publisher, and/or funding agency policies associated with intellectual property? Are there embargoes for political, commercial, or patent reasons? Describe the intended future uses/users for the data Indicate how the data should be cited by others. How will the issue of persistent citation be addressed? For example, if the data will be deposited in a public archive, will the dataset have a persistent identifier (e.g., ARK, DOI, Handle, PURL, URN) assigned to it? === Long-term storage and data management === Researchers should identify an appropriate archive for the long-term preservation of their data. By identifying the archive early in the project, the data can be formatted, transformed, and documented appropriately to meet the requirements of the archive. Researchers should consult colleagues and professional societies in their discipline to determine the most appropriate database, and include a backup archive in their data management plan in case their first choice goes out of existence. Early in the project, the primary researcher should identify what data will be preserved in an archive. Usually, preserving the data in its most raw form is desirable, although data derivatives and products can also be preserved. An individual should be identified as the primary contact person for archived data, and ensure contact information is always kept up-to-date in case there are requests for data or information about data. === Budget === Data management and preservation costs may be considerable, depending on the nature of the project. By anticipating costs ahead of time, researchers ensure that the data will be properly managed and archived. Potential expenses that should be considered are Human resources and staff as they handle data preparation, management, documentation, and preservation Hardware and/or software needed for data management, backing up, security, documentation, and preservation Costs associated with submitting the data to an archive The data management plan should include how these costs will be paid. == NSF Data Management Plan == All grant proposals submitted to National Science Foundation (NSF) must include a Data Management Plan that is no more than two pages. This is a supplement (not part of the 15-page proposal) and should describe how the proposal will conform to the Award and Administration Guide policy (see below). It may include the following: The types of data The standards to be used for data and metadata format and content Policies for access and sharing Policies and provisions for re-use Plans for archiving data Policy summarized from the NSF Award and Administration Guide, Section 4 (Dissemination and Sharing of Research Results): Promptly publish with appropriate authorship Share data, samples, physical collections, and supporting materials with others, within a reasonable time frame Share software and inventions Investigators can keep their legal rights over their intellectual property, but they still have to make their results, data, and collections available to others Policies will be implemented via Proposal review Award negotiations and conditions Support/incentives == ESRC Data Management Plan == Since 1995, the UK's Economic and Social Research Council (ESRC) have had a research data policy in place. The current ESRC Research Data Policy states that research data created as a result of ESRC-funded research should be openly available to the scientific community to the maximum extent possible, through long-term preservation and high-quality data management. ESRC requires a data management plan for all research award applications where new data are being created. Such plans are designed to promote a structured approach to data management throughout the data lifecycle, resulting in better quality data that is ready to archive for sharing and re-use. The UK Data Service, the ESRC's flagship data service, provides practical guidance on research data management planning suitable for social science researchers in the UK and around the world. ESRC has a longstanding arrangement with the UK Data A

  Read more →
• 

  Very large database

  A very large database, (originally written very large data base) or VLDB, is a database that contains a very large amount of data, so much that it can require specialized architectural, management, processing and maintenance methodologies. == Definition == The vague adjectives of very and large allow for a broad and subjective interpretation, but attempts at defining a metric and threshold have been made. Early metrics were the size of the database in a canonical form via database normalization or the time for a full database operation like a backup. Technology improvements have continually changed what is considered very large. One definition has suggested that a database has become a VLDB when it is "too large to be maintained within the window of opportunity… the time when the database is quiet". == Sizes of a VLDB database == There is no absolute amount of data that can be cited. For example, one cannot say that any database with more than 1 TB of data is considered a VLDB. This absolute amount of data has varied over time as computer processing, storage and backup methods have become better able to handle larger amounts of data. That said, VLDB issues may start to appear when 1 TB is approached, and are more than likely to have appeared as 30 TB or so is exceeded. == VLDB challenges == Key areas where a VLDB may present challenges include configuration, storage, performance, maintenance, administration, availability and server resources. === Configuration === Careful configuration of databases that lie in the VLDB realm is necessary to alleviate or reduce issues raised by VLDB databases. === Administration === The complexities of managing a VLDB can increase exponentially for the database administrator as database size increases. === Availability and maintenance === When dealing with VLDB operations relating to maintenance and recovery such as database reorganizations and file copies which were quite practical on a non-VLDB take very significant amounts of time and resources for a VLDB database. In particular it typically infeasible to meet a typical recovery time objective (RTO), the maximum expected time a database is expected to be unavailable due to interruption, by methods which involve copying files from disk or other storage archives. To overcome these issues techniques such as clustering, cloned/replicated/standby databases, file-snapshots, storage snapshots or a backup manager may help achieve the RTO and availability, although individual methods may have limitations, caveats, license, and infrastructure requirements while some may risk data loss and not meet the recovery point objective (RPO). For many systems only geographically remote solutions may be acceptable. ==== Backup and recovery ==== Best practice is for backup and recovery to be architectured in terms of the overall availability and business continuity solution. === Performance === Given the same infrastructure there may typically be a decrease in performance, that is increase in response time as database size increases. Some accesses will simply have more data to process (scan) which will take proportionally longer (linear time); while the indexes used to access data may grow slightly in height requiring perhaps an extra storage access to reach the data (sub-linear time). Other effects can be caching becoming less efficient because proportionally less data can be cached and while some indexes such as the B+ automatically sustain well with growth others such as a hash table may need to be rebuilt. Should an increase in database size cause the number of accessors of the database to increase then more server and network resources may be consumed, and the risk of contention will increase. Some solutions to regaining performance include partitioning, clustering, possibly with sharding, or use of a database machine. ==== Partitioning ==== Partitioning may be able assist the performance of bulk operations on a VLDB including backup and recovery., bulk movements due to information lifecycle management (ILM), reducing contention as well as allowing optimization of some query processing. === Storage === In order to satisfy needs of a VLDB the database storage needs to have low access latency and contention, high throughput, and high availability. === Server resources === The increasing size of a VLDB may put pressure on server and network resources and a bottleneck may appear that may require infrastructure investment to resolve. == Relationship to big data == VLDB is not the same as big data, but the storage aspect of big data may involve a VLDB database. That said some of the storage solutions supporting big data were designed from the start to support large volumes of data, so database administrators may not encounter VLDB issues that older versions of traditional RDBMS's might encounter.

  Read more →
• 

  Autonomous agent

  An autonomous agent is an artificial intelligence (AI) system that can perform complex tasks independently. == Definitions == There are various definitions of autonomous agent. According to Brustoloni (1991): "Autonomous agents are systems capable of autonomous, purposeful action in the real world." According to Maes (1995): "Autonomous agents are computational systems that inhabit some complex dynamic environment, sense and act autonomously in this environment, and by doing so realize a set of goals or tasks for which they are designed." Franklin and Graesser (1997) review different definitions and propose their definition: "An autonomous agent is a system situated within and a part of an environment that senses that environment and acts on it, over time, in pursuit of its own agenda and so as to effect what it senses in the future." They explain that: "Humans and some animals are at the high end of being an agent, with multiple, conflicting drives, multiples senses, multiple possible actions, and complex sophisticated control structures. At the low end, with one or two senses, a single action, and an absurdly simple control structure we find a thermostat." == Agent appearance == Lee et al. (2015) post safety issue from how the combination of external appearance and internal autonomous agent have impact on human reaction about autonomous vehicles. Their study explores the human-like appearance agent and high level of autonomy are strongly correlated with social presence, intelligence, safety and trustworthiness. In specific, appearance impacts most on affective trust while autonomy impacts most on both affective and cognitive domain of trust where cognitive trust is characterized by knowledge-based factors and affective trust is largely emotion driven. == Applications == Agentic AI systems: Advanced AI agents that can scope out projects and complete them with necessary tools, representing a significant evolution from simple task-oriented systems. Internet of things (IoT) Integration: Autonomous agents increasingly interact with IoT devices, enabling smart home systems, industrial monitoring, and urban infrastructure management. Collaborative software development: Tools like Cognition AI's Devin aim to create autonomous software engineers capable of complex reasoning, planning, and completing engineering tasks requiring thousands of decisions. Enterprise automation: Business process automation platforms like Salesforce's Agentforce provide autonomous bots for various service functions. == Challenges and considerations == Uncertainty and incomplete information: Autonomous agents must make decisions with limited or uncertain information about their environment and future states. Integration complexity: Incorporating autonomous agents into existing systems and workflows can be technically challenging and resource-intensive. Scalability: As systems become more complex and more agents are used, maintaining coordination and avoiding conflicts becomes increasingly difficult. Trust: Research has shown the combination of external appearance and internal autonomous capabilities significantly impacts human reactions and trust. Lee et al. (2015) found that human-like appearance and high levels of autonomy are strongly correlated with social presence, intelligence, safety, and trustworthiness perceptions. Specifically, appearance impacts affective trust most significantly, while autonomy affects both affective and cognitive trust domains, where affective trust is emotionally driven, and cognitive trust is characterized by knowledge-based factors. Vulnerability to manipulation: Researchers from Harvard, MIT and other educational institutions found that AI agents could become vulnerable to manipulation and could perform detrimental actions in the process of being helpful. == Ethical and regulatory concerns == Accountability: Determining responsibility when autonomous agents make incorrect or harmful decisions remains a complex issue. Privacy and security: autonomous agents often require access to sensitive data, raising concerns about data protection and system security.

  Read more →
• 

  Vinelink.com

  Vinelink.com (VINE) is a national website in the United States that allows victims of crime, and the general public, to track the movements of prisoners held by the various states and territories. The first four letters in the websites name, "vine", are an acronym for "Victim Information and Notification Everyday". Vinelink.com displays information, based on the information provided by the various states' departments of correction and other law enforcement agencies, on whether an inmate is in custody, has been released, has been granted parole or probation, or has escaped from custody. In some cases, the website will reveal whether a defendant has been granted parole or probation, but then subsequently violated conditions of their release and become a fugitive. Information provided on Vinelink.com represents metadata, in that the website lists a defendant's custody status; but does not list what the individual is charged with, their criminal history, or the amount of their bail, if applicable. Internet users accessing the Vinelink.com website choose from a map of states and provinces within the United States where they wish to perform a search for an inmate. The user may then search for an individual using the inmate's or parolee's name, or by entering the inmate's specific department of corrections inmate number, if known. When the inmate's custody status changes, users who have registered to be notified of such changes will be notified via email, phone or both. This information is currently released upon request, without the website requesting reasons for the users search or requiring payment, as public records available to the general public. Inmate information is available for most states, and for Puerto Rico, on the website. The states of Arizona, Georgia, Massachusetts, Montana, New Hampshire and West Virginia provide very limited information on the site. In March of 2025, The Maine Sheriff's Association entered into a contract to pilot the use of the VINE system in three counties in the state as well as a regional jail, therefore making South Dakota the only state that does not participate in the VINE system to any degree. The website does not provide data on prisoners detained by the Federal Bureau of Prisons which has its own inmate locator web site nor for inmates of the U.S. military prisons.

  Read more →
• 

  Ontology alignment

  Ontology alignment, or ontology matching, is the process of determining correspondences between concepts in ontologies. A set of correspondences is also called an alignment. The phrase takes on a slightly different meaning, in computer science, cognitive science or philosophy. == Computer science == For computer scientists, concepts are expressed as labels for data. Historically, the need for ontology alignment arose out of the need to integrate heterogeneous databases, ones developed independently and thus each having their own data vocabulary. In the Semantic Web context involving many actors providing their own ontologies, ontology matching has taken a critical place for helping heterogeneous resources to interoperate. Ontology alignment tools find classes of data that are semantically equivalent, for example, "truck" and "lorry". The classes are not necessarily logically identical. According to Euzenat and Shvaiko (2007), there are three major dimensions for similarity: syntactic, external, and semantic. Coincidentally, they roughly correspond to the dimensions identified by Cognitive Scientists below. A number of tools and frameworks have been developed for aligning ontologies, some with inspiration from Cognitive Science and some independently. Ontology alignment tools have generally been developed to operate on database schemas, XML schemas, taxonomies, formal languages, entity-relationship models, dictionaries, and other label frameworks. They are usually converted to a graph representation before being matched. Since the emergence of the Semantic Web, such graphs can be represented in the Resource Description Framework line of languages by triples of the form , as illustrated in the Notation 3 syntax. In this context, aligning ontologies is sometimes referred to as "ontology matching". The problem of Ontology Alignment has been tackled recently by trying to compute matching first and mapping (based on the matching) in an automatic fashion. Systems like DSSim, X-SOM or COMA++ obtained at the moment very high precision and recall. The Ontology Alignment Evaluation Initiative aims to evaluate, compare and improve the different approaches. === Formal definition === Given two ontologies i = ⟨ C i , R i , I i , T i , V i ⟩ {\displaystyle i=\langle C_{i},R_{i},I_{i},T_{i},V_{i}\rangle } and j = ⟨ C j , R j , I j , T j , V j ⟩ {\displaystyle j=\langle C_{j},R_{j},I_{j},T_{j},V_{j}\rangle } where C {\displaystyle C} is the set of classes, R {\displaystyle R} is the set of relations, I {\displaystyle I} is the set of individuals, T {\displaystyle T} is the set of data types, and V {\displaystyle V} is the set of values, we can define different types of (inter-ontology) relationships. Such relationships will be called, all together, alignments and can be categorized among different dimensions: similarity vs logic: this is the difference between matchings (predicating about the similarity of ontology terms), and mappings (logical axioms, typically expressing logical equivalence or inclusion among ontology terms) atomic vs complex: whether the alignments we considered are one-to-one, or can involve more terms in a query-like formulation (e.g., LAV/GAV mapping) homogeneous vs heterogeneous: do the alignments predicate on terms of the same type (e.g., classes are related only to classes, individuals to individuals, etc.) or we allow heterogeneity in the relationship? type of alignment: the semantics associated to an alignment. It can be subsumption, equivalence, disjointness, part-of or any user-specified relationship. Subsumption, atomic, homogeneous alignments are the building blocks to obtain richer alignments, and have a well defined semantics in every Description Logic. Let's now introduce more formally ontology matching and mapping. An atomic homogeneous matching is an alignment that carries a similarity degree s ∈ [ 0 , 1 ] {\displaystyle s\in [0,1]} , describing the similarity of two terms of the input ontologies i {\displaystyle i} and j {\displaystyle j} . Matching can be either computed, by means of heuristic algorithms, or inferred from other matchings. Formally we can say that, a matching is a quadruple m = ⟨ i d , t i , t j , s ⟩ {\displaystyle m=\langle id,t_{i},t_{j},s\rangle } , where t i {\displaystyle t_{i}} and t j {\displaystyle t_{j}} are homogeneous ontology terms, s {\displaystyle s} is the similarity degree of m {\displaystyle m} . A (subsumption, homogeneous, atomic) mapping is defined as a pair μ = ⟨ t i , t j ⟩ {\displaystyle \mu =\langle t_{i},t_{j}\rangle } , where t i {\displaystyle t_{i}} and t j {\displaystyle t_{j}} are homogeneous ontology terms. == Cognitive science == For cognitive scientists interested in ontology alignment, the "concepts" are nodes in a semantic network that reside in brains as "conceptual systems." The focal question is: if everyone has unique experiences and thus different semantic networks, then how can we ever understand each other? This question has been addressed by a model called ABSURDIST (Aligning Between Systems Using Relations Derived Inside Systems for Translation). Three major dimensions have been identified for similarity as equations for "internal similarity, external similarity, and mutual inhibition." == Ontology alignment methods == Two sub research fields have emerged in ontology mapping, namely monolingual ontology mapping and cross-lingual ontology mapping. The former refers to the mapping of ontologies in the same natural language, whereas the latter refers to "the process of establishing relationships among ontological resources from two or more independent ontologies where each ontology is labelled in a different natural language". Existing matching methods in monolingual ontology mapping are discussed in Euzenat and Shvaiko (2007). Approaches to cross-lingual ontology mapping are presented in Fu et al. (2011).

  Read more →
• 

  Uncertain database

  An uncertain database is a kind of database studied in database theory. The goal of uncertain databases is to manage information on which there is some uncertainty. Uncertain databases make it possible to explicitly represent and manage uncertainty on the data, usually in a succinct way. == Formal definition == At the basis of uncertain databases is the notion of possible world. Specifically, a possible world of an uncertain database is a (certain) database which is one of the possible realizations of the uncertain database. A given uncertain database typically has more than one, and potentially infinitely many, possible worlds. A formalism to represent uncertain databases then explains how to succinctly represent a set of possible worlds into one uncertain database. == Types of uncertain databases == Uncertain database models differ in how they represent and quantify these possible worlds: Incomplete databases are a compact representation of the set of possible worlds – the use of NULL in SQL, arguably the most commonplace instantiation of uncertain databases, is an example of incomplete database model. Probabilistic databases are a compact representation of a probability distribution over the set of possible worlds. Fuzzy databases are a compact representation of a fuzzy set of the possible worlds. Though mostly studied in the relational setting, uncertain database models can also be defined in other relational models such as graph databases or XML databases. === Incomplete database === The most common database model is the relational model. Multiple incomplete database models have been defined over the relational model, that form extensions to the relational algebra. These have been called Imieliński–Lipski algebras: Relations with NULL values, also called Codd tables c-tables v-tables === Example === The following table is a relation of an incomplete database, described in the formalism of NULL values: There are infinitely many possible worlds for this incomplete database, obtained by replacing the "NULL" values with concrete values. For instance, the following relation is a possible world:

  Read more →
• 

  European Cloud Partnership

  The European Cloud Partnership (ECP) is an advisory group set up by the European Commission as part of the European Cloud Computing Strategy to provide guidance on the development of cloud computing in the European Union. The ECP is led by a steering board composed of representatives of the IT and telecom industry as well as European government policymakers. == History == After publishing a document, "Unleashing the Potential of Cloud Computing in Europe", the European Commission set up the European Cloud Partnership in 2012, with a steering board including both government and industry representatives. The ECP's first meeting was held on 19 November 2012; it was chaired by the President of Estonia Toomas Hendrik Ilves. In 2013 the ECP began drafting its charter. That year, as information about the PRISM scandal came to light, the ECP emphasized the need for Europe to develop its own cloud infrastructure, rather than depend on that of the United States. It completed a report titled "Trusted Cloud Europe" in February 2014 defining its policy, and outlining a process for effective public and private sector participation in cloud computing development in Europe. The report recommended that the commission identify technical, legal and operational best practices, and promote these through certifications and guidelines, and facilitate recognition across national boundaries. The report also recommended that the commission identify cloud computing stakeholders and help them work together through consultations and workshops. In March 2014, the European Commission invited external parties to submit opinions, take part in a discussion forum and complete an online survey in response to the report.

  Read more →
• 

  Sparse identification of non-linear dynamics

  Sparse identification of nonlinear dynamics (SINDy) is a data-driven algorithm for obtaining dynamical systems from data. Given a series of snapshots of a dynamical system and its corresponding time derivatives, SINDy performs a sparsity-promoting regression (such as LASSO and sparse Bayesian inference) on a library of nonlinear candidate functions of the snapshots against the derivatives to find the governing equations. This procedure relies on the assumption that most physical systems only have a few dominant terms which dictate the dynamics, given an appropriately selected coordinate system and quality training data. It has been applied to identify the dynamics of fluids, based on proper orthogonal decomposition, as well as other complex dynamical systems, such as biological networks. == Mathematical Overview == First, consider a dynamical system of the form x ˙ = d d t x ( t ) = f ( x ( t ) ) , {\displaystyle {\dot {\textbf {x}}}={\frac {d}{dt}}{\textbf {x}}(t)={\textbf {f}}({\textbf {x}}(t)),} where x ( t ) ∈ R n {\displaystyle {\textbf {x}}(t)\in \mathbb {R} ^{n}} is a state vector (snapshot) of the system at time t {\displaystyle t} and the function f ( x ( t ) ) {\displaystyle {\textbf {f}}({\textbf {x}}(t))} defines the equations of motion and constraints of the system. The time derivative may be either prescribed or numerically approximated from the snapshots. With x {\displaystyle {\textbf {x}}} and x ˙ {\displaystyle {\dot {\textbf {x}}}} sampled at m {\displaystyle m} equidistant points in time ( t 1 , t 2 , ⋯ , t m {\displaystyle t_{1},t_{2},\cdots ,t_{m}} ), these can be arranged into matrices of the form X = [ x T ( t 1 ) x T ( t 2 ) ⋮ x T ( t m ) ] = [ x 1 ( t 1 ) x 2 ( t 1 ) ⋯ x n ( t 1 ) x 1 ( t 2 ) x 2 ( t 2 ) ⋯ x n ( t 2 ) ⋮ ⋮ ⋱ ⋮ x 1 ( t m ) x 2 ( t m ) ⋯ x n ( t m ) ] , {\displaystyle {\bf {{X}={\begin{bmatrix}\mathbf {x} ^{\mathsf {T}}(t_{1})\\\mathbf {x} ^{\mathsf {T}}(t_{2})\\\vdots \\\mathbf {x} ^{\mathsf {T}}(t_{m})\end{bmatrix}}={\begin{bmatrix}x_{1}(t_{1})&x_{2}(t_{1})&\cdots &x_{n}(t_{1})\\x_{1}(t_{2})&x_{2}(t_{2})&\cdots &x_{n}(t_{2})\\\vdots &\vdots &\ddots &\vdots \\x_{1}(t_{m})&x_{2}(t_{m})&\cdots &x_{n}(t_{m})\end{bmatrix}},}}} and similarly for X ˙ {\displaystyle {\dot {\mathbf {X} }}} . Next, a library Θ ( X ) {\displaystyle \mathbf {\Theta } (\mathbf {X} )} of nonlinear candidate functions of the columns of X {\displaystyle {\textbf {X}}} is constructed, which may be constant, polynomial, or more exotic functions (like trigonometric and rational terms, and so on): Θ ( X ) = [ | | | | | | 1 X X 2 X 3 ⋯ sin ⁡ ( X ) cos ⁡ ( X ) ⋯ | | | | | | ] {\displaystyle \ \ \ {\bf {{\Theta }({\bf {{X})={\begin{bmatrix}\vline &\vline &\vline &\vline &&\vline &\vline &\\1&{\bf {X}}&{\bf {{X}^{2}}}&{\bf {{X}^{3}}}&\cdots &\sin({\bf {{X})}}&\cos({\bf {{X})}}&\cdots \\\vline &\vline &\vline &\vline &&\vline &\vline &\end{bmatrix}}}}}}} The number of possible model structures from this library is combinatorially high. f ( x ( t ) ) {\displaystyle {\textbf {f}}({\textbf {x}}(t))} is then substituted by Θ ( X ) {\displaystyle {\bf {{\Theta }({\textbf {X}})}}} and a vector of coefficients Ξ = [ ξ 1 ξ 2 ⋯ ξ n ] {\displaystyle {\bf {{\Xi }=\left[{\bf {{\xi }_{1}{\bf {{\xi }_{2}\cdots {\bf {{\xi }_{n}}}}}}}\right]}}} determining the active terms in f ( x ( t ) ) {\displaystyle {\textbf {f}}({\textbf {x}}(t))} : X ˙ = Θ ( X ) Ξ {\displaystyle {\dot {\bf {X}}}={\bf {{\Theta }({\bf {{X}){\bf {\Xi }}}}}}} Because only a few terms are expected to be active at each point in time, an assumption is made that f ( x ( t ) ) {\displaystyle {\textbf {f}}({\textbf {x}}(t))} admits a sparse representation in Θ ( X ) {\displaystyle {\bf {{\Theta }({\textbf {X}})}}} . This then becomes an optimization problem in finding a sparse Ξ {\displaystyle {\bf {\Xi }}} which optimally embeds X ˙ {\displaystyle {\dot {\textbf {X}}}} . In other words, a parsimonious model is obtained by performing least squares regression on the system (4) with sparsity-promoting ( L 1 {\displaystyle L_{1}} ) regularization ξ k = arg ⁡ min ξ k ′ | | X ˙ k − Θ ( X ) ξ k ′ | | 2 + λ | | ξ k ′ | | 1 , {\displaystyle {\bf {{\xi }_{k}={\underset {\bf {{\xi }'_{k}}}{\arg \min }}\left|\left|{\dot {\bf {X}}}_{k}-{\bf {{\Theta }({\bf {{X}){\bf {{\xi }'_{k}}}}}}}\right|\right|_{2}+\lambda \left|\left|{\bf {{\xi }'_{k}}}\right|\right|_{1},}}} where λ {\displaystyle \lambda } is a regularization parameter. Finally, the sparse set of ξ k {\displaystyle {\bf {{\xi }_{k}}}} can be used to reconstruct the dynamical system: x ˙ k = Θ ( x ) ξ k {\displaystyle {\dot {x}}_{k}={\bf {{\Theta }({\bf {{x}){\bf {{\xi }_{k}}}}}}}}

  Read more →
• 

  List of library and information science journals

  This list covers the journals, magazines, periodicals already published and continuing in the discipline of library and information science (LIS). It doesn't include ceased titles or predatory journals. Titles listed were taken from various scholarly sources, UGC Care and Wikipedia articles. == LIS journal prestige as assessed by LIS faculty == In a 2013 article by Laura Manzari, 232 LIS faculty members from ALA-accredited information science programs ranked the most prestigious journals in library and information science. The following journals were ranked in the top ten most prestigious: Journal of the Association for Information Science and Technology The Library Quarterly Annual Review of Information Science and Technology Journal of Documentation Library Trends Library and Information Science Research Information Processing and Management Journal of Education for Library and Information Science Education College & Research Libraries First Monday (journal) A subsequent study by Safón and Docampo in 2023 identified impactful LIS journals based on their influence on papers published in other LIS publications. Journals listed in the top ten in this study that did not appear in Manzari's list include: Scientometrics International Journal of Information Management Quantitative Science Studies MIS Quarterly Information and Management Journal of the Association for Information Systems Journal of Informetrics The Journal of Academic Librarianship == India == Annals of Library and Information Studies. (Pub: CSIR-NIScPR ), Formerly: Annals of Library Science. ISSN 0003-4835. (1954-) OPEN ACCESS Collnet Journal of Scientrometrics and Information Management (Pub: Taru Publications, Online through Taylor and Francis) ISSN: 0973-7766 Online 2168-930X. College Libraries (Pub: West Bengal College Librarians’ Association (WBCLA) ISSN 0972-1975, Quarterly DESIDOC Journal of Library and Information Technology (DJLIT) (Formerly: DESIDOC Bulletin 0970-8154, DESIDOC Bulletin of Information Technology. 0971-4383/0974-0643) (Pub: Defence Scientific Information & Documentation Centre) ISSN: 0974-0643, ISSN: 0976-4658 (O), Bi-monthly, OPEN ACCESS. Grandhalaya Sarvaswam (Bilingual: Telugu & English) [Pub: Andhra Pradesh Library Association, Vijayawada, Andhra Pradesh, India] (1915–) Gyankosh: Journal of Library and Information Management. (Pub: Integrated Academy Of Management And Technology. Through: Indian Journals.Com). ISSN: 2229-4023 (P), 2249-3182. Half yearly. IASLIC Bulletin (Pub: Indian Association of Special Libraries and Information Centres) ISSN: 0018-8411. Quarterly (1956-) IASLIC Newsletter (Pub: Indian Association of Special Libraries and Information Centres. (Pub: Indian Association of Special Libraries and Information Centres) ISSN 0018-845X. Monthly. (1966-) INFLIBNET Newsletter. (Pub: INFLIBNET). Monthly. Informatics Studies. (Pub: Centre For Informatics Research And Development). Quarterly. Through: Indian journals.com. ISSN: 2583-8994 (Online), 2320-530X (Print) ISST Journal of Advances in Librarianship (Pub:Intellectuals Society for Socio-Techno Welfare) ISSN: 0976-9021. Semiannual. Journal of Advanced Research in Library and Information Science. (JALIS Publishers). 4/year. ISSN 2277-2219. Journal of Indian Library Association (Pub: Indian Library Association). ISSN (P) 2277-5145 O) 2456-513X. Quarterly. (1965-). Journal of Scientometric Research. (Pub: Phcog.Net). ISSN (P) 2321-6654, (O) 2320-0057]; Frequency : Triannual. KELPRO Bulletin (Pub: Kerala Library Professionals' Organisation - KELPRO). ISSN 0975-4911( Print),2582-497X (O).(1993-) KIIT Journal of Library and Information Management (Pub: KIIT University, online through Indian Journals.com) Half yearly. ISSN: 2348-0858. Library Herald. (Pub: Delhi Library Association - DLA). Quarterly. ISSN: 0024-2292. Library Progress (International). (Pub: Bpas Publications, Through: ). Half yearly. ISSN: 0970-1052. (O) ISSN: 2320-317X. (1981-) Pearl: A Journal of Library and Information Science. (Pub: University Library Teacher's Association of Andhra Pradesh, Hyderabad), ISSN: 0973-7081 (print), 0975-6922 (online). Quarterly. RBU Journal of Library and Information Science. (Pub: Rabindra Bharati University).ISSN: 0972-2750. Annual. SALIS Journal of Information Management and Technology - SJIMT. (Pub: Society for the Advancement of Library and Information Science). Half-yearly. ISSN 0975-4105. SALIS Journal of Library and Information Science - SJLIS: an International Journal. (Pub: Society for the Advancement of Library and Information Science). Half-yearly. ISSN: 0973-3108. SRELS journal of Information and Knowledge (Formerly: Library Science with a Slant to Documentation, ISSN: 0024-2543; Library Science with a Slant to Documentation and Information Studies ISSN: 0970-6089; SRELS Journal of Information Management ISSN: ). Quarterly. ISSN: 2583-9314 (O) World Digital Libraries. Half yearly. ISSN: 0974-567X (P), 0975-7597 (O). == Other countries == African Journal of Library, Archives and Information Science Art Libraries Journal (Cambridge University Press) Bibliothèque de l'École des Chartes Canadian Journal of Information and Library Science Cataloging & Classification Quarterly Communications in Information Literacy Cataloging & Classification Quarterly Catholic Library Association Children and Libraries Code4Lib Journal College & Research Libraries Communications in Information Literacy Disability in Library and Information Studies Electronic Journal of Academic and Special Librarianship El Profesional de la Información (es) (EPI) (Formerly Information World en Español) Evidence Based Library and Information Practice (journal) Faslname-ye Ketab Florida Libraries. Florida Library Association. Georgia Library Quarterly. Quarterly. (Pub: Georgia Library Association). Hipertext.net IFLA Journal In the Library with the Lead Pipe Information & Culture International Journal of Information Retrieval Research (IJIRR) Information Processing and Management Information Research Information Sciences (journal) Information Visualization (journal) Information, Communication & Society International Journal of Geographical Information Science Information Research: An International Electronic Journal (IR) Internet Research (journal) Issues in Science and Technology Librarianship Italian Journal of Library and Information Studies (JLIS.it) JLIS.it Journal of Documentation (JDoc) Journal of Information Ethics Journal of Information Science (JIS) Journal of Information Technology Journal of Informetrics Journal of Librarianship and Information Science Journal of Library & Information Studies - JLIS. (Pub: National Taiwan University) Journal of Library Administration Journal of Religious & Theological Information Journal of the Association for Information Science and Technology (Formerly Journal of the American Society for Information Science and Technology) (JASIST) Journal of the Medical Library Association Journal of the Canadian Health Libraries Association (Pub: Canadian Health Libraries Association). Knowledge Organization (journal) Knowledge Quest. (Pub: American Association of School Librarians) Library and Information Science Abstracts Library Literature and Information Science Library, Information Science & Technology Abstracts Library Literature and Information Science Retrospective Library Review (journal) Library Trends Libri (journal) Malaysian Journal of Library and Information Science MLA Forum New Century Library New Review of Children's Literature and Librarianship Notes (journal) Portal – Libraries and the Academy Progressive Librarian, Progressive Librarians Guild Reference and User Services Quarterly Reference Services Review Research Evaluation (journal) Scientometrics (journal) Serials Review South African Journal of Libraries and Information Science The Charleston Advisor The Christian Librarian, from the Association of Christian Librarians The Journal of Academic Librarianship The Library Quarterly (LQ) The Public-Access Computer Systems Review TripleC Webolog

  Read more →