AI Avatar Of Deceased

AI Avatar Of Deceased — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

Scenery generator

A scenery generator (or terrain generator) is a software used to create landscape images, 3D models, and animations. These programs often use procedural generation to generate the landscapes, or sometimes created and rendered by a 3D artist. These programs are often used in video games or movies. Basic elements of landscapes created by scenery generators include terrain, water, foliage, and clouds. The process for basic random generation uses a diamond square algorithm. == Common features == Most scenery generators can create basic heightmaps to simulate the variation of elevation in basic terrain. Common techniques include Simplex noise, fractals, or the diamond-square algorithm, which can generate 2-dimensional heightmaps. A version of scenery generator can be very simplistic. Using a diamond-square algorithm with some extra steps involving fractals, an algorithm for random generation of terrain can be made with only 120 lines of code. The program in example takes a grid and then divides the grid repeatedly. Each smaller grid is then split into squares and diamonds and the algorithm then makes the randomized terrain for each square and diamond. Most programs for creating landscapes also allow for adjustment and editing of the landscape. For example, World Creator allows for terrain sculpting, which uses a similar brush system as Photoshop, and allows for additional terrain enhancement with its procedural techniques such as erosion, sediments, and more. Other tools in the World Creator program include terrain stamping, which allows you to import elevation maps and use them as a base. The programs tend to also allow for additional placement of rocks, trees, etc. These can be done procedurally or by hand depending on the program. Typically the models used for the placement objects are the same as to lessen the amount of work that would be done if the user was to create a multitude of different trees. The terrain generated the computer does a generation of multifractals then integrates them until finally rendering them onto the screen. These techniques are typically done “on-the-fly” which typically for a 128 × 128 resolution terrain would mean 1.5 seconds on a CPU from the early 1990s. == Applications == Scenery generators are commonly used in movies, animations, 3D rendering, and video games. For example, Industrial Light & Magic used E-on Vue to create the fictional environments for Pirates of the Caribbean: Dead Man's Chest. In such live-action cases, a 3D model of the generated environment is rendered and blended with live-action footage. Scenery generated by the software may also be used to create completely computer-generated scenes. In the case of animated movies such as Kung Fu Panda, the raw generation is assisted by hand-painting to accentuate subtle details. Environmental elements not commonly associated with landscapes, such as ocean waves, have also been handled by the software. Scenery generation is used in most 3D based video-games. These typically use either custom or purchased engines that contain their own scenery generators. For some games they tend to use a procedurally generated terrain. These typically use a form of height mapping and use of Perlin noise. This will create a grid that with one point in a 2D coordinate will create the same heightmap as it is pseudorandom, meaning it will result in the same output with the same input. This can then easily be translated into the product 3D image. These can then be changed from the editor tools in most engines if the terrain will be custom built. With recent developments neural networks can be built to create or texture the terrain based on previously suggested artwork or heightmap data. These would be generated using algorithms that have been able to identify images and similarities between them. With the info the machine can take other heightmaps and render a very similar looking image to the style image. This can be used to create similar images in example a Studio Ghibli or Van Gogh art-style. == Software == Most game engines, whether custom or proprietary, will have terrain generation built in. Some terrain generator programs include, Terragen, which can create terrain, water, atmosphere and lighting; L3DT, which provides similar functions to Terragen, and has a 2048 × 2048 resolution limit; and World Creator, which can create terrain, and is fully GPU powered. === List of 3D terrain generation software ===
Read more →
Nuance Communications

Nuance Communications, Inc. was an American multinational computer software technology corporation, headquartered in Burlington, Massachusetts, that markets speech recognition and artificial intelligence software. Nuance merged with its competitor in the commercial large-scale speech application business, ScanSoft, in October 2005. ScanSoft was a Xerox spin-off that was bought in 1999 by Visioneer, a hardware and software scanner company, which adopted ScanSoft as the new merged company name. The original ScanSoft had its roots in Kurzweil Computer Products. In April 2021, Microsoft announced it would buy Nuance Communications. The deal is an all-cash transaction of $19.7 billion, including company debt, or $56 per share. The acquisition was completed in March 2022. == History == The Speech Technology and Research (STAR) Laboratory at SRI International began the journey that, in 1994, resulted in a spin-off company; Corona Corporation (later renamed to Nuance Communications ). Nuance Communications (NUAN) went public on the Nasdaq Stock Market in 1995. Nuance focused on commercializing advanced speech recognition technologies. Nuance was an early spinoff of SRI's Speech Technology and Research (STAR) Laboratory, a world leader in audio processing, speech and speaker analytics and spoken language research. The technology that served as the foundation of Nuance's speech recognition solution started at the STAR Lab and helped launch Nuance more than 20 years ago. In 1995, The SRI Language Modeling Toolkit (SRILM) was developed. This provides the tools to build and apply statistical language models (LMs), primarily for use in speech recognition, statistical tagging and segmentation, and machine translation. In terms of commercialization of natural automated speech recognition, SRI's natural language speech recognition software was the first to be deployed by a major corporation. In 1996, Charles Schwab & Co., Inc., used Nuance's speech recognition technology to allow customers to receive stock quotes over the telephone. One of the key features of the ‘Schwab Discount Brokerage system’, was the ability to recognize English words even when spoken by customers with accents. In 1997, Nuance Communications developed the first large scale commercial dialog system for United Parcel Services (UPS). UPS used the voice recognition platform to handle very large numbers of inquiries about package status. The company that would later merge with Nuance Communications started life as Visioneer, incorporated in 1992. In 1999, Visioneer acquired ScanSoft, Inc. (SSFT), and the combined company became known as ScanSoft. In September 2005, ScanSoft Inc. acquired and merged with Nuance Communications (NUAN), a natural language DOD-project spinoff from SRI International. The resulting company adopted the Nuance name. During the prior decade, the two companies competed in the commercial large-scale speech application business. === Data breach === Between 2014 and 2017, Nuance exposed over 45,000 patient records. == Solutions == Customer service virtual assistants Speech recognition — for people Speech recognition — for business Speech recognition — for physicians Accessibility Power PDF Managed Print Services Transcription === ScanSoft origins === In 1974, Raymond Kurzweil founded Kurzweil Computer Products, Inc. to develop the first omni-font optical character-recognition system – a computer program capable of recognizing text written in any normal font. In 1980, Kurzweil sold his company to Xerox. The company became known as Xerox Imaging Systems (XIS), and later ScanSoft. In March 1992, a new company called Visioneer, Inc. was founded to develop scanner hardware and software products, such as a sheetfed scanner called PaperMax and the document management software PaperPort. Visioneer eventually sold its hardware division to Primax Electronics, Ltd. in January 1999. Two months later, in March, Visioneer acquired ScanSoft from Xerox to form a new public company with ScanSoft as the new company-wide name. Prior to 2001, ScanSoft focused primarily on desktop imaging software such as TextBridge, PaperPort and OmniPage. Beginning with the December 2001 acquisition of Lernout & Hauspie assets, the company moved into the speech recognition business and began to compete with Nuance. Lernout & Hauspie had acquired speech recognition company Dragon Systems in June 2001, shortly before becoming bankrupt in October. Scansoft acquired speech recognition company SpeechWorks in 2003. === Partnership with Siri and Apple Inc. === In 2013, Nuance confirmed that its natural language processing algorithms supported Apple's Siri voice assistant. === Focus on health care === In 2019, Nuance spun off its automotive division as the company Cerence, allowing it to focus on health care applications. === Acquisition by Microsoft === On April 12, 2021, Microsoft announced that it would buy Nuance Communications for $19.7 billion, or $56 a share, a 22% increase over the previous closing price. Nuance's CEO, Mark Benjamin, stayed with the company. This was Microsoft's second-biggest acquisition up to that point, after its purchase of LinkedIn for $24 billion (~$30.7 billion in 2024) in 2016. Shortly after the deal, the Competition and Markets Authority, a UK regulatory body, stated it was looking into the deal on the basis of antitrust concerns. In December 2021, it was reported that the deal would be approved by the European Union. The acquisition was completed on March 4, 2022. In May 2023, Nuance announced an unspecified number of layoffs.
Read more →
Prosthesis

In medicine, a prosthesis (pl.: prostheses; from Ancient Greek: πρόσθεσις, romanized: prósthesis, lit. 'addition, application, attachment'), or a prosthetic implant, is an artificial device that replaces a missing body part, which may be lost through physical trauma, disease, or a condition present at birth (congenital disorder). Prostheses may restore the normal functions of the missing body part, or may perform a cosmetic function. A person who has undergone an amputation is sometimes referred to as an amputee, Rehabilitation for someone with an amputation is primarily coordinated by a physiatrist as part of an inter-disciplinary team consisting of physiatrists, prosthetists, nurses, physical therapists, and occupational therapists. Prostheses can be created by hand or with computer-aided design (CAD), a software interface that helps creators design and analyze the creation with computer-generated 2-D and 3-D graphics as well as analysis and optimization tools. == Types == A person's prosthetic device should be designed and assembled to meet their individual appearance and functional needs. Depending on personal circumstances, co-morbidities, budget or health insurance coverage, and access to medical care, decisions may need to balance aesthetics and function. In addition, for some individuals, a myoelectric device, a body-powered device, or an activity-specific device may be appropriate options. The person's future goals and vocational aspirations and potential capabilities may help them choose between one or more devices. Craniofacial prostheses include intra-oral and extra-oral prostheses. Extra-oral prostheses are further divided into hemifacial, auricular (ear), nasal, orbital and ocular. Intra-oral prostheses include dental prostheses, such as dentures, obturators, and dental implants. Prostheses of the neck include larynx substitutes, trachea and upper esophageal replacements, Some prostheses of the torso include breast prostheses which may be either single or bilateral, full breast devices or nipple prostheses. Penile prostheses are used to treat erectile dysfunction, perform phalloplasty procedures in men, and to build a new penis in female-to-male gender reassignment surgeries. === Limb prostheses === Limb prostheses include both upper- and lower-extremity prostheses. Upper-extremity prostheses are used at varying levels of amputation: forequarter, shoulder disarticulation, transhumeral prosthesis, elbow disarticulation, transradial prosthesis, wrist disarticulation, full hand, partial hand, finger, partial finger. A transradial prosthesis is an artificial limb that replaces an arm missing below the elbow. Upper limb prostheses can be categorized in three main categories: Passive devices, Body Powered devices, and Externally Powered (myoelectric) devices. Passive devices can either be passive hands, mainly used for cosmetic purposes, or passive tools, mainly used for specific activities (e.g. leisure or vocational). An extensive overview and classification of passive devices can be found in a literature review by Maat et.al. A passive device can be static, meaning the device has no movable parts, or it can be adjustable, meaning its configuration can be adjusted (e.g. adjustable hand opening). Despite the absence of active grasping, passive devices are very useful in bimanual tasks that require fixation or support of an object, or for gesticulation in social interaction. According to scientific data a third of the upper limb amputees worldwide use a passive prosthetic hand. Body Powered or cable-operated limbs work by attaching a harness and cable around the opposite shoulder of the damaged arm. A recent body-powered approach has explored the utilization of the user's breathing to power and control the prosthetic hand to help eliminate actuation cable and harness. The third category of available prosthetic devices comprises myoelectric arms. This particular class of devices distinguishes itself from the previous ones due to the inclusion of a battery system. This battery serves the dual purpose of providing energy for both actuation and sensing components. While actuation predominantly relies on motor or pneumatic systems, a variety of solutions have been explored for capturing muscle activity, including techniques such as Electromyography, Sonomyography, Myokinetic, and others. These methods function by detecting the minute electrical currents generated by contracted muscles during upper arm movement, typically employing electrodes or other suitable tools. Subsequently, these acquired signals are converted into gripping patterns or postures that the artificial hand will then execute. In the prosthetics industry, a trans-radial prosthetic arm is often referred to as a "BE" or below elbow prosthesis. Lower-extremity prostheses provide replacements at varying levels of amputation. These include hip disarticulation, transfemoral prosthesis, knee disarticulation, transtibial prosthesis, Syme's amputation, foot, partial foot, and toe. The two main subcategories of lower extremity prosthetic devices are trans-tibial (any amputation transecting the tibia bone or a congenital anomaly resulting in a tibial deficiency) and trans-femoral (any amputation transecting the femur bone or a congenital anomaly resulting in a femoral deficiency). A transfemoral prosthesis is an artificial limb that replaces a leg missing above the knee. Transfemoral amputees can have a very difficult time regaining normal movement. In general, a transfemoral amputee must use approximately 80% more energy to walk than a person with two whole legs. This is due to the complexities in movement associated with the knee. In newer and more improved designs, hydraulics, carbon fiber, mechanical linkages, motors, computer microprocessors, and innovative combinations of these technologies are employed to give more control to the user. In the prosthetics industry, a trans-femoral prosthetic leg is often referred to as an "AK" or above the knee prosthesis. A transtibial prosthesis is an artificial limb that replaces a leg missing below the knee. A transtibial amputee is usually able to regain normal movement more readily than someone with a transfemoral amputation, due in large part to retaining the knee, which allows for easier movement. Lower extremity prosthetics describe artificially replaced limbs located at the hip level or lower. In the prosthetics industry, a transtibial prosthetic leg is often referred to as a "BK" or below the knee prosthesis. Prostheses are manufactured and fit by clinical prosthetists. Prosthetists are healthcare professionals responsible for making, fitting, and adjusting prostheses and for lower limb prostheses will assess both gait and prosthetic alignment. Once a prosthesis has been fit and adjusted by a prosthetist, a rehabilitation physiotherapist (called physical therapist in America) will help teach a new prosthetic user to walk with a leg prosthesis. To do so, the physical therapist may provide verbal instructions and may also help guide the person using touch or tactile cues. This may be done in a clinic or home. There is some research suggesting that such training in the home may be more successful if the treatment includes the use of a treadmill. Using a treadmill, along with the physical therapy treatment, helps the person to experience many of the challenges of walking with a prosthesis. In the United Kingdom, 75% of lower limb amputations are performed due to inadequate circulation (dysvascularity). This condition is often associated with many other medical conditions (co-morbidities) including diabetes and heart disease that may make it a challenge to recover and use a prosthetic limb to regain mobility and independence. For people who have inadequate circulation and have lost a lower limb, there is insufficient evidence due to a lack of research, to inform them regarding their choice of prosthetic rehabilitation approaches. Lower extremity prostheses are often categorized by the level of amputation or after the name of a surgeon: Transfemoral (Above-knee) Transtibial (Below-knee) Ankle disarticulation (more commonly known as Syme's amputation) Knee disarticulation (also see knee replacement) Hip disarticulation, (also see hip replacement) Hemi-pelvictomy Partial foot amputations (Pirogoff, Talo-Navicular and Calcaneo-cuboid (Chopart), Tarso-metatarsal (Lisfranc), Trans-metatarsal, Metatarsal-phalangeal, Ray amputations, toe amputations). Van Nes rotationplasty ==== Prosthetic raw materials ==== Prosthetic are made lightweight for better convenience for the amputee. Some of these materials include: Plastics: Polyethylene Polypropylene Acrylics Polyurethane Wood (early prosthetics) Rubber (early prosthetics) Lightweight metals: Aluminum Composites: Carbon fiber reinforced polymers Wheeled prostheses have also been used extensively in the rehabilitation of injured domestic animals, including dogs, cats, pigs, rabbits, and
Read more →
Dabbler

Dabbler is natural media drawing software for beginners. It was initially developed by Fractal Design Corporation. It is a simplified version of Fractal Design Painter, and included multimedia tutorials and a fullscreen interface. Dabbler was released as "Art Dabbler" after the MetaCreations merger, and rights were eventually transferred to Corel. Dabbler operating systems are Mac OS and Microsoft Windows.
Read more →
Journal of Machine Learning Research

The Journal of Machine Learning Research is a peer-reviewed open access scientific journal covering machine learning. It was established in 2000 and the first editor-in-chief was Leslie Kaelbling. The current editors-in-chief are Francis Bach (Inria) and David Blei (Columbia University). == History == The journal was established as an open-access alternative to the journal Machine Learning. In 2001, forty editorial board members of Machine Learning resigned, saying that in the era of the Internet, it was detrimental for researchers to continue publishing their papers in expensive journals with pay-access archives. The open access model employed by the Journal of Machine Learning Research allows authors to publish articles for free and retain copyright, while archives are freely available online. Print editions of the journal were published by MIT Press until 2004 and by Microtome Publishing thereafter. From its inception, the journal received no revenue from the print edition and paid no subvention to MIT Press or Microtome Publishing. In response to the prohibitive costs of arranging workshop and conference proceedings publication with traditional academic publishing companies, the journal launched a proceedings publication arm in 2007 and now publishes proceedings for several leading machine learning conferences, including the International Conference on Machine Learning, COLT, AISTATS, and workshops held at the Conference on Neural Information Processing Systems.
Read more →
Shape factor (image analysis and microscopy)

Shape factors are dimensionless quantities used in image analysis and microscopy that numerically describe the shape of a particle, independent of its size. Shape factors are calculated from measured dimensions, such as diameter, chord lengths, area, perimeter, centroid, moments, etc. The dimensions of the particles are usually measured from two-dimensional cross-sections or projections, as in a microscope field, but shape factors also apply to three-dimensional objects. The particles could be the grains in a metallurgical or ceramic microstructure, or the microorganisms in a culture, for example. The dimensionless quantities often represent the degree of deviation from an ideal shape, such as a circle, sphere or equilateral polyhedron. Shape factors are often normalized, that is, the value ranges from zero to one. A shape factor equal to one usually represents an ideal case or maximum symmetry, such as a circle, sphere, square or cube. == Aspect ratio == The most common shape factor is the aspect ratio, a function of the largest diameter and the smallest diameter orthogonal to it: A R = d min d max {\displaystyle A_{R}={\frac {d_{\min }}{d_{\max }}}} The normalized aspect ratio varies from approaching zero for a very elongated particle, such as a grain in a cold-worked metal, to near unity for an equiaxed grain. The reciprocal of the right side of the above equation is also used, such that the AR varies from one to approaching infinity. == Circularity == Another very common shape factor is the circularity (or isoperimetric quotient), a function of the perimeter P and the area A: f circ = 4 π A P 2 {\displaystyle f_{\text{circ}}={\frac {4\pi A}{P^{2}}}} The circularity of a circle is 1, and much less than one for a starfish footprint. The reciprocal of the circularity equation is also used, such that fcirc varies from one for a circle to infinity. == Elongation shape factor == The less-common elongation shape factor is defined as the square root of the ratio of the two second moments in of the particle around its principal axes. f elong = i 2 i 1 {\displaystyle f_{\text{elong}}={\sqrt {\frac {i_{2}}{i_{1}}}}} == Compactness shape factor == The compactness shape factor is a function of the polar second moment in of a particle and a circle of equal area A. f comp = A 2 2 π i 1 2 + i 2 2 {\displaystyle f_{\text{comp}}={\frac {A^{2}}{2\pi {\sqrt {{i_{1}}^{2}+{i_{2}}^{2}}}}}} The fcomp of a circle is one, and much less than one for the cross-section of an I-beam. == Waviness shape factor == The waviness shape factor of the perimeter is a function of the convex portion Pcvx of the perimeter to the total. f wav = P cvx P {\displaystyle f_{\text{wav}}={\frac {P_{\text{cvx}}}{P}}} Some properties of metals and ceramics, such as fracture toughness, have been linked to grain shapes. == An application of shape factors == Greenland, the largest island in the world, has an area of 2,166,086 km2; a coastline (perimeter) of 39,330 km; a north–south length of 2670 km; and an east–west length of 1290 km. The aspect ratio of Greenland is A R = 1290 2670 = 0.483 {\displaystyle A_{R}={\frac {1290}{2670}}=0.483} The circularity of Greenland is f circ = 4 π ( 2166086 ) 39330 2 = 0.0176. {\displaystyle f_{\text{circ}}={\frac {4\pi (2166086)}{39330^{2}}}=0.0176.} The aspect ratio is agreeable with an eyeball-estimate on a globe. Such an estimate on a typical flat map, using the Mercator projection, would be less accurate due to the distorted scale at high latitudes. The circularity is deceptively low, due to the fjords that give Greenland a very jagged coastline (see the coastline paradox). A low value of circularity does not necessarily indicate a lack of symmetry, and shape factors are not limited to microscopic objects.
Read more →
Microscope image processing

Microscope image processing is a broad term that covers the use of digital image processing techniques to process, analyze and present images obtained from a microscope. Such processing is now commonplace in a number of diverse fields such as medicine, biological research, cancer research, drug testing, metallurgy, etc. A number of manufacturers of microscopes now specifically design in features that allow the microscopes to interface to an image processing system. == Image acquisition == Until the early 1990s, most image acquisition in video microscopy applications was typically done with an analog video camera, often simply closed circuit TV cameras. While this required the use of a frame grabber to digitize the images, video cameras provided images at full video frame rate (25-30 frames per second) allowing live video recording and processing. While the advent of solid state detectors yielded several advantages, the real-time video camera was actually superior in many respects. Today, acquisition is usually done using a CCD camera mounted in the optical path of the microscope. The camera may be full colour or monochrome. Very often, very high resolution cameras are employed to gain as much direct information as possible. Cryogenic cooling is also common, to minimise noise. Often digital cameras used for this application provide pixel intensity data to a resolution of 12-16 bits, much higher than is used in consumer imaging products. Ironically, in recent years, much effort has been put into acquiring data at video rates, or higher (25-30 frames per second or higher). What was once easy with off-the-shelf video cameras now requires special, high speed electronics to handle the vast digital data bandwidth. Higher speed acquisition allows dynamic processes to be observed in real time, or stored for later playback and analysis. Combined with the high image resolution, this approach can generate vast quantities of raw data, which can be a challenge to deal with, even with a modern computer system. While current CCD detectors allow very high image resolution, often this involves a trade-off because, for a given chip size, as the pixel count increases, the pixel size decreases. As the pixels get smaller, their well depth decreases, reducing the number of electrons that can be stored. In turn, this results in a poorer signal-to-noise ratio. For best results, one must select an appropriate sensor for a given application. Because microscope images have an intrinsic limiting resolution, it often makes little sense to use a noisy, high resolution detector for image acquisition. A more modest detector, with larger pixels, can often produce much higher quality images because of reduced noise. This is especially important in low-light applications such as fluorescence microscopy. Moreover, one must also consider the temporal resolution requirements of the application. A lower resolution detector will often have a significantly higher acquisition rate, permitting the observation of faster events. Conversely, if the observed object is motionless, one may wish to acquire images at the highest possible spatial resolution without regard to the time required to acquire a single image. == 2D image techniques == Image processing for microscopy application begins with fundamental techniques intended to most accurately reproduce the information contained in the microscopic sample. This might include adjusting the brightness and contrast of the image, averaging images to reduce image noise and correcting for illumination non-uniformities. Such processing involves only basic arithmetic operations between images (i.e. addition, subtraction, multiplication and division). The vast majority of processing done on microscope image is of this nature. Another class of common 2D operations called image convolution are often used to reduce or enhance image details. Such "blurring" and "sharpening" algorithms in most programs work by altering a pixel's value based on a weighted sum of that and the surrounding pixels (a more detailed description of kernel based convolution deserves an entry for itself) or by altering the frequency domain function of the image using Fourier Transform. Most image processing techniques are performed in the Frequency domain. Other basic two dimensional techniques include operations such as image rotation, warping, color balancing etc. At times, advanced techniques are employed with the goal of "undoing" the distortion of the optical path of the microscope, thus eliminating distortions and blurring caused by the instrumentation. This process is called deconvolution, and a variety of algorithms have been developed, some of great mathematical complexity. The end result is an image far sharper and clearer than could be obtained in the optical domain alone. This is typically a 3-dimensional operation, that analyzes a volumetric image (i.e. images taken at a variety of focal planes through the sample) and uses this data to reconstruct a more accurate 3-dimensional image. == 3D image techniques == Another common requirement is to take a series of images at a fixed position, but at different focal depths. Since most microscopic samples are essentially transparent, and the depth of field of the focused sample is exceptionally narrow, it is possible to capture images "through" a three-dimensional object using 2D equipment like confocal microscopes. Software is then able to reconstruct a 3D model of the original sample which may be manipulated appropriately. The processing turns a 2D instrument into a 3D instrument, which would not otherwise exist. In recent times this technique has led to a number of scientific discoveries in cell biology. == Analysis == Analysis of images will vary considerably according to application. Typical analysis includes determining where the edges of an object are, counting similar objects, calculating the area, perimeter length and other useful measurements of each object. A common approach is to create an image mask which only includes pixels that match certain criteria, then perform simpler scanning operations on the resulting mask. It is also possible to label objects and track their motion over a series of frames in a video sequence.
Read more →
Cheekd

Cheekd is a dating app based in New York City. It was founded in 2010 by Lori Cheek. == History == The service debuted with the name "Cheek'd". Founder Lori Cheek appeared on the television program, Shark Tank in February 2014, but did not succeed in obtaining funding from any of the five judges. She said Cheek’d only had 1000 subscribers at that time. === Business card model === Cheek'd offered two plans, paid and free. For $25, subscribers got a set of 50 business cards that could be given out once someone caught their eye. Each card had a phrase, an online code, and a URL to the subscriber's account. Recipients could look up the giver's profile. In addition to purchasing cards, there was a $9.95 monthly membership fee. === Smartphone app === In 2015, the service's name changed from "Cheek'd" to "Cheekd". The new app used Bluetooth technology to alert users whenever a compatible user was within a 30-foot radius, instead of using cards. == Patent lawsuit == The original business card-based model for Cheekd had been claimed as a patented process by Lori Cheek, as U.S. patent 8,543,465. In September 2017, a complaint was filed, alleging that the idea was not original to Lori Cheek. Cheek responded, stating that the complaint was baseless, and a complete fabrication. The lawsuit Pirri v. Cheek was dismissed in a pre-trial conference in New York's Federal Court on April 5, 2018.
Read more →
Deconvolution

In mathematics, deconvolution is the inverse of convolution. Both operations are used in signal processing and image processing. For example, it may be possible to recover the original signal after a filter (convolution) by using a deconvolution method with a certain degree of accuracy. Due to the measurement error of the recorded signal or image, it can be demonstrated that the worse the signal-to-noise ratio (SNR), the worse the reversing of a filter will be; hence, inverting a filter is not always a good solution as the error amplifies. Deconvolution offers a solution to this problem. The foundations for deconvolution and time-series analysis were largely laid by Norbert Wiener of the Massachusetts Institute of Technology in his book Extrapolation, Interpolation, and Smoothing of Stationary Time Series (1949). The book was based on work Wiener had done during World War II but that had been classified at the time. Some of the early attempts to apply these theories were in the fields of weather forecasting and economics. == Description == In general, the objective of deconvolution is to find the solution f of a convolution equation of the form: f ∗ g = h {\displaystyle fg=h\,} Usually, h is some recorded signal, and f is some signal that we wish to recover, but has been convolved with a filter or distortion function g, before we recorded it. Usually, h is a distorted version of f and the shape of f can't be easily recognized by the eye or simpler time-domain operations. The function g represents the impulse response of an instrument or a driving force that was applied to a physical system. If we know g, or at least know the form of g, then we can perform deterministic deconvolution. However, if we do not know g in advance, then we need to estimate it. This can be done using methods of statistical estimation or building the physical principles of the underlying system, such as the electrical circuit equations or diffusion equations. There are several deconvolution techniques, depending on the choice of the measurement error and deconvolution parameters: === Raw deconvolution === When the measurement error is very low (ideal case), deconvolution collapses into a filter reversing. This kind of deconvolution can be performed in the Laplace domain. By computing the Fourier transform of the recorded signal h and the system response function g, you get H and G, with G as the transfer function. Using the convolution theorem, F = H / G {\displaystyle F=H/G\,} where F is the estimated Fourier transform of f. Finally, the inverse Fourier transform of the function F is taken to find the estimated deconvolved signal f. Note that G is at the denominator and could amplify elements of the error model if present. === Deconvolution with noise === In physical measurements, the situation is usually closer to ( f ∗ g ) + ε = h {\displaystyle (fg)+\varepsilon =h\,} In this case ε is noise that has entered our recorded signal. If a noisy signal or image is assumed to be noiseless, the statistical estimate of g will be incorrect. In turn, the estimate of ƒ will also be incorrect. The lower the signal-to-noise ratio, the worse the estimate of the deconvolved signal will be. That is the reason why inverse filtering the signal (as in the "raw deconvolution" above) is usually not a good solution. However, if at least some knowledge exists of the type of noise in the data (for example, white noise), the estimate of ƒ can be improved through techniques such as Wiener deconvolution. == Applications == === Seismology === The concept of deconvolution had an early application in reflection seismology. In 1950, Enders Robinson was a graduate student at MIT. He worked with others at MIT, such as Norbert Wiener, Norman Levinson, and economist Paul Samuelson, to develop the "convolutional model" of a reflection seismogram. This model assumes that the recorded seismogram s(t) is the convolution of an Earth-reflectivity function e(t) and a seismic wavelet w(t) from a point source, where t represents recording time. Thus, our convolution equation is s ( t ) = ( e ∗ w ) ( t ) . {\displaystyle s(t)=(ew)(t).\,} The seismologist is interested in e, which contains information about the Earth's structure. By the convolution theorem, this equation may be Fourier transformed to S ( ω ) = E ( ω ) W ( ω ) {\displaystyle S(\omega )=E(\omega )W(\omega )\,} in the frequency domain, where ω {\displaystyle \omega } is the frequency variable. By assuming that the reflectivity is white, we can assume that the power spectrum of the reflectivity is constant, and that the power spectrum of the seismogram is the spectrum of the wavelet multiplied by that constant. Thus, | S ( ω ) | ≈ k | W ( ω ) | . {\displaystyle |S(\omega )|\approx k|W(\omega )|.\,} If we assume that the wavelet is minimum phase, we can recover it by calculating the minimum phase equivalent of the power spectrum we just found. The reflectivity may be recovered by designing and applying a Wiener filter that shapes the estimated wavelet to a Dirac delta function (i.e., a spike). The result may be seen as a series of scaled, shifted delta functions (although this is not mathematically rigorous): e ( t ) = ∑ i = 1 N r i δ ( t − τ i ) , {\displaystyle e(t)=\sum _{i=1}^{N}r_{i}\delta (t-\tau _{i}),} where N is the number of reflection events, r i {\displaystyle r_{i}} are the reflection coefficients, t − τ i {\displaystyle t-\tau _{i}} are the reflection times of each event, and δ {\displaystyle \delta } is the Dirac delta function. In practice, since we are dealing with noisy, finite bandwidth, finite length, discretely sampled datasets, the above procedure only yields an approximation of the filter required to deconvolve the data. However, by formulating the problem as the solution of a Toeplitz matrix and using Levinson recursion, we can relatively quickly estimate a filter with the smallest mean squared error possible. We can also do deconvolution directly in the frequency domain and get similar results. The technique is closely related to linear prediction. === Optics and other imaging === In optics and imaging, the term "deconvolution" is specifically used to refer to the process of reversing the optical distortion that takes place in an optical microscope, electron microscope, telescope, or other imaging instrument, thus creating clearer images. It is usually done in the digital domain by a software algorithm, as part of a suite of microscope image processing techniques. Deconvolution is also practical to sharpen images that suffer from fast motion or jiggles during capturing. Early Hubble Space Telescope images were distorted by a flawed mirror and were sharpened by deconvolution. The usual method is to assume that the optical path through the instrument is optically perfect, convolved with a point spread function (PSF), that is, a mathematical function that describes the distortion in terms of the pathway a theoretical point source of light (or other waves) takes through the instrument. Usually, such a point source contributes a small area of fuzziness to the final image. If this function can be determined, it is then a matter of computing its inverse or complementary function, and convolving the acquired image with that. The result is the original, undistorted image. In practice, finding the true PSF is impossible, and usually an approximation of it is used, theoretically calculated or based on some experimental estimation by using known probes. Real optics may also have different PSFs at different focal and spatial locations, and the PSF may be non-linear. The accuracy of the approximation of the PSF will dictate the final result. Different algorithms can be employed to give better results, at the price of being more computationally intensive. Since the original convolution discards data, some algorithms use additional data acquired at nearby focal points to make up some of the lost information. Regularization in iterative algorithms (as in expectation-maximization algorithms) can be applied to avoid unrealistic solutions. When the PSF is unknown, it may be possible to deduce it by systematically trying different possible PSFs and assessing whether the image has improved. This procedure is called blind deconvolution. Blind deconvolution is a well-established image restoration technique in astronomy, where the point nature of the objects photographed exposes the PSF thus making it more feasible. It is also used in fluorescence microscopy for image restoration, and in fluorescence spectral imaging for spectral separation of multiple unknown fluorophores. The most common iterative algorithm for the purpose is the Richardson–Lucy deconvolution algorithm; the Wiener deconvolution (and approximations) are the most common non-iterative algorithms. For some specific imaging systems such as laser pulsed terahertz systems, PSF can be modeled mathematically. As a result, as shown in the figure, deconvolution of the modeled PS
Read more →
Pixel aspect ratio

A pixel aspect ratio (PAR) is a mathematical ratio that describes how the width of a pixel in a digital image compares to the height of that pixel. Most digital imaging systems display an image as a grid of tiny, square pixels. However, some imaging systems, especially those that must be compatible with standard-definition television motion pictures, display an image as a grid of rectangular pixels, in which the pixel width and height are different. Pixel aspect ratio describes this difference. Use of pixel aspect ratio mostly involves pictures pertaining to standard-definition television and some other exceptional cases. Most other imaging systems, including those that comply with SMPTE standards and practices, use square pixels. PAR is also known as sample aspect ratio and abbreviated SAR, though it can be confused with storage aspect ratio. == Introduction == The ratio of the width to the height of an image is known as the aspect ratio, or more precisely the display aspect ratio (DAR) – the aspect ratio of the image as displayed; for TV, DAR was traditionally 4:3 (a.k.a. fullscreen), with 16:9 (a.k.a. widescreen) now the standard for HDTV. In digital images, there is a distinction with the storage aspect ratio (SAR), which is the ratio of pixel dimensions. If an image is displayed with square pixels, then these ratios agree; if not, then non-square, "rectangular" pixels are used, and these ratios disagree. The aspect ratio of the pixels themselves is known as the pixel aspect ratio (PAR) – for square pixels this is 1:1 – and these are related by the identity: Rearranging (solving for PAR) yields: For example: A 640 × 480 VGA image has a SAR of 640/480 = 4:3, and if displayed on a 4:3 display (DAR = 4:3) has square pixels, hence a PAR of 1:1. By contrast, a 720 × 576 D-1 PAL image has a SAR of 720/576 = 5:4, but if displayed on a 4:3 display (DAR = 4:3) the PAR is 4/3 : 5/4 = 16:15 ≈ 1.066. This means that the pixels of the PAL picture must be "stretched" by this amount to fit in the 4:3 display. In analog images such as film there is no notion of pixel, nor notion of SAR or PAR, but in the digitization of analog images the resulting digital image has pixels, hence SAR (and accordingly PAR, if displayed at the same aspect ratio as the original). Non-square pixels arise often in early digital TV standards, related to digitalization of analog TV signals – whose vertical and "effective" horizontal resolutions differ and are thus best described by non-square pixels – and also in some digital video cameras and computer display modes, such as Color Graphics Adapter (CGA). Today they arise also in transcoding between resolutions with different SARs. Actual displays do not generally have non-square pixels, though digital sensors might; they are rather a mathematical abstraction used in resampling images to convert between resolutions. There are several complicating factors in understanding PAR, particularly as it pertains to digitization of analog video: First, analog video does not have pixels, but rather a raster scan, and thus has a well-defined vertical resolution (the lines of the raster), but not a well-defined horizontal resolution, since each line is an analog signal. However, by a standardized sampling rate, the effective horizontal resolution can be determined by the sampling theorem, as is done below. Second, due to overscan, some of the lines at the top and bottom of the raster are not visible, as are some of the possible image on the left and right – see Overscan: Analog to digital resolution issues. Also, the resolution may be rounded (DV NTSC uses 480 lines, rather than the 486 that are possible). Third, analog video signals are interlaced – each image (frame) is sent as two "fields", each with half the lines. Thus either the pixels are twice as tall as they would be without interlacing, or the image is deinterlaced. == Background == Video is presented as a sequential series of images called video frames. Historically, video frames were created and recorded in analog form. As digital display technology, digital broadcast technology, and digital video compression evolved separately, it resulted in video frame differences that must be addressed using pixel aspect ratio. Digital video frames are generally defined as a grid of pixels used to present each sequential image. The horizontal component is defined by pixels (or samples), and is known as a video line. The vertical component is defined by the number of lines, as in 480 lines. Standard-definition television standards and practices were developed as broadcast technologies and intended for terrestrial broadcasting, and were therefore not designed for digital video presentation. Such standards define an image as an array of well-defined horizontal "Lines", well-defined vertical "Line Duration" and a well-defined picture center. However, there is not a standard-definition television standard that properly defines image edges or explicitly demands a certain number of picture elements per line. Furthermore, analog video systems such as NTSC 480i and PAL 576i, instead of employing progressively displayed frames, employ fields or interlaced half-frames displayed in an interwoven manner to reduce flicker and double the image rate for smoother motion. === Analog-to-digital conversion === As a result of computers becoming powerful enough to serve as video editing tools, video digital-to-analog converters and analog-to-digital converters were made to overcome this incompatibility. To convert analog video lines into a series of square pixels, the industry adopted a default sampling rate at which luma values were extracted into pixels. The luma sampling rate for 480i pictures was 12+3⁄11 MHz and for 576i pictures was 14+3⁄4 MHz. The term pixel aspect ratio was first coined when ITU-R BT.601 (commonly known as Rec. 601) specified that standard-definition television pictures are made of lines of exactly 720 non-square pixels. ITU-R BT.601 did not define the exact pixel aspect ratio but did provide enough information to calculate the exact pixel aspect ratio based on industry practices: The standard luma sampling rate of precisely 13+1⁄2 MHz. Based on this information: The pixel aspect ratio for 480i would be 10:11 as: 12 3 11 ÷ 13 1 2 = 10 11 {\displaystyle 12{\tfrac {3}{11}}\div 13{\tfrac {1}{2}}={\tfrac {10}{11}}} The pixel aspect ratio for 576i would be 59:54 as: 14 3 4 ÷ 13 1 2 = 59 54 {\displaystyle 14{\tfrac {3}{4}}\div 13{\tfrac {1}{2}}={\tfrac {59}{54}}} SMPTE RP 187 further attempted to standardize the pixel aspect ratio values for 480i and 576i. It designated 177:160 for 480i or 1035:1132 for 576i. However, due to significant difference with practices in effect by industry and the computational load that they imposed upon the involved hardware, SMPTE RP 187 was simply ignored. SMPTE RP 187 information annex A.4 further suggested the use of 10:11 for 480i. As of this writing, ITU-R BT.601-6, which is the latest edition of ITU-R BT.601, still implies that the pixel aspect ratios mentioned above are correct. === Digital video processing === As stated above, ITU-R BT.601 specified that standard-definition television pictures are made of lines of 720 non-square pixels, sampled with a precisely specified sampling rate. A simple mathematical calculation reveals that a 704 pixel width would be enough to contain a 480i or 576i standard 4:3 picture: A 4:3 480-line picture, digitized with the Rec. 601-recommended sampling rate, would be 704 non-square pixels wide. x 480 × 10 11 = 4 3 ⇒ x = 480 × 11 × 4 10 × 3 = 704 {\displaystyle {\frac {x}{480}}\times {\frac {10}{11}}={\frac {4}{3}}\Rightarrow x={\frac {480\times 11\times 4}{10\times 3}}=704} A 4:3 576-line picture, digitized with the Rec. 601-recommended sampling rate, would be 702+54⁄59 non-square pixels wide. x 576 × 59 54 = 4 3 ⇒ x = 576 × 54 × 4 59 × 3 = 702 54 59 {\displaystyle {\frac {x}{576}}\times {\frac {59}{54}}={\frac {4}{3}}\Rightarrow x={\frac {576\times 54\times 4}{59\times 3}}=702{\tfrac {54}{59}}} Unfortunately, not all standard TV pictures are exactly 4:3: As mentioned earlier, in analog video, the center of a picture is well-defined but the edges of the picture are not standardized. As a result, some analog devices (mostly PAL devices but also some NTSC devices) generated motion pictures that were horizontally (slightly) wider. This also proportionately applies to anamorphic widescreen (16:9) pictures. Therefore, to maintain a safe margin of error, ITU-R BT.601 required sampling 16 more non-square pixels per line (8 more at each edge) to ensure saving all video data near the margins. This requirement, however, had implications for PAL motion pictures. PAL pixel aspect ratios for standard (4:3) and anamorphic wide screen (16:9), respectively 59:54 and 118:81, were awkward for digital image processing, especially for mixing PAL and NTSC video clips. Therefore, video editing products chose the almost equivalent value
Read more →
Nvidia Omniverse

Omniverse is a real-time 3D graphics collaboration platform created by Nvidia. It has been used for applications in the visual effects and "digital twin" industrial simulation industries. Omniverse makes extensive use of the Universal Scene Description (USD) format. == Third-party Integrations == Omniverse supports integration with external computer-aided design tools through third-party connectors. For example, academic work has demonstrated a connector linking Omniverse with the open-source CAD system FreeCAD, enabling collaborative access to CAD geometry via the Omniverse Nucleus server and extending Omniverse usage beyond media and entertainment workflows.
Read more →
Alias Eclipse

Eclipse was a professional 2D image editing program available on Silicon Graphics and Windows workstations. Designed to manipulate high-resolution images like digitized movie frames and photographs for print, it offered color correction tools, image processing effects, rudimentary paint features, and spline-based drawing and masking. == History == Eclipse was originally developed in the late 1980s by Full Color Computing, an early provider of photo retouch and color prepress software for Silicon Graphics workstations. Alias Research (later Alias Systems Corporation), a developer of professional 3D graphics applications for the SGI platform, purchased the rights to Eclipse in fall 1990. Alias developed Eclipse through the early to mid-1990s, releasing version 2.5 in 1995 with improvements to the speed of color correction, effects, and rendering. Xyvision's Contex Prepress division purchased exclusive rights to Eclipse from Alias in 1996, and released version 3.0 the following year. Eclipse was subsequently sold to German developer Form & Vision GmbH, which continued development and ported it to the Windows platform. In 1999, Form & Vision released a demo of Eclipse 3.1.3 on the SGI platform which was limited to 1600 x 1600 pixel images, then ceased development of Eclipse on the SGI platform. Eclipse was thereafter developed exclusively for the Windows platform, culminating with version 3.1.4 in 2001. In the same year the firm went bankrupt. == Features == Eclipse was designed to work with very large images that could not be manipulated in real time on contemporary computer systems due to memory limitations, and thus allowed the user to make modifications to a lower-resolution copy of the original image in "proxy mode." Brush strokes, color corrections, and other edits were saved in proxy mode, then applied to the full-size image in post processing. This method also allowed for batch processing of a high-resolution image sequence using the edits applied to the original proxy image. Other features included color correction and separation, warping, special effects, text, and shape masking. Wavelet image compression created by LuraTech was added to Eclipse 3.1.4
Read more →
Vismon

Vismon was the Bell Labs system which displayed authors' faces on one of their internal e-mail systems. The name was a pun on the sysmon program used at Bell to show the load on computer systems. It can also be interpreted as "visual monitor". The system inspired Rich Burridge to develop the similar but more widespread faces system, which spread with Unix distributions in the 1980s. This in turn inspired Steve Kinzler to develop the Picons, or personal icons, which have the goal of offering symbols and other images, as well as faces, to represent individuals and institutions in email messages. Other systems such as the faces available on the LAN email functions of the NeXTSTEP platform also seem to have been influenced by the original Vismon capabilities. The faces program in Plan 9 is the direct descendant of this system. Vismon was the work of Rob Pike and Dave Presotto. It was based on some early experiments by Luca Cardelli. Many other scientists and engineers of the Computing Science Research Center of the Murray Hill facility were also involved. All had been spurred by the introduction in 1983 of the new Blit graphics terminal developed by Pike and Bart Locanthi and marketed by Teletype Corporation of Skokie, Illinois as the DMD 5620. Pike was eager, along with his colleagues, to exploit the new graphic capabilities. Pike and company went around their Center, convincing everybody, from directors and administrative assistants to engineers and scientists, to pose as they got out a 4×5 view camera with a Polaroid back and took black-and-white photos (Polaroid type 52) of their faces. Their efforts yielded nearly 100 faces, which they digitised with a scanner from graphics colleagues. They wrote several programs to transform the faces, store them and serve them on several machines at the lab. As time went by, they added faces from outside their Center and outside Bell Labs. This database also led to the pico image editor (originally named zunk) which was used for image transformations, many of them with colleagues as the preferred target. The first programs built around vismon were used to announce incoming mail in a dedicated window, using the 48 by 48 pixel faces. Later on the faces were also used to decorate line printer banners.
Read more →
Dispo

Dispo (formerly David's Disposable) is an American photo sharing and social networking app owned by Dispo, Inc. and co-founded by CEO Daniel Liss, YouTuber David Dobrik, and Natalie Mariduena. When the app initially launched on iOS in December 2019, it briefly charted as the most downloaded free app on the App Store, ahead of both Disney+ and Instagram. The app was rebranded and relaunched as Dispo, expanding from a simple camera app to a full social network in March 2021. It is based on the disposable camera. == History == On December 21, 2019, the app was first launched on the App Store under the name "David's Disposable." In its first week of release, it was downloaded more than a million times, reaching number one among free apps in the App Store. In June 2020, the team decided to rename the app to Dispo, purchasing the Dispo.fun domain on June 21, 2020. The company announced the change in September 2020. The early Dispo team consisted of Dobrik's longtime friend and business associate Natalie Mariduena as its treasurer, entrepreneur and venture capitalist Daniel Liss as chief executive officer, Regynald Augustin as first engineer, and Briana Hokanson as lead designer. In October 2020, the company raised a $4M seed round with backing from Alexis Ohanian's venture fund Seven Seven Six alongside other investors including Unshackled Ventures, Shrug Capital, and Weekend Fund. In February 2021, Axios reported that the app had generated US$20 million in its series A round, led by Spark Capital. At this time, the app was valued at US$200 million. A New York Times profile asked, "Are Disposables the Future of Photosharing?" In March 2021, the app was officially relaunched with new social network features and its invite-only feature was dropped. On March 21, 2021, it was announced that Spark Capital would sever all ties with Dispo in light of several disparaging allegations against David Dobrik and The Vlog Squad. The same day, it was announced that Dobrik would leave the company and step down from the company's board of directors. On March 22, 2021, Seven Seven Six and Unshackled Ventures announced they would be standing by the company and its remaining employees but donating profits to charity. In June, 2021, CEO Daniel Liss announced Dispo's official Series A. Investors and advisors in the new Dispo include Ohanian's Seven Seven Six, Unshackled, Endeavor, photographers Annie Leibovitz and Raven B. Varona, NBA stars Kevin Durant and Andre Iguodala (through their 35 Ventures and F9 Strategies venture firms, respectively). Other participants include Cara Delevingne, Sofia Vergara, Shade Room CEO Angelica Nwandu, Latin World Entertainment CEO Luis Balaguer, and Amplify Africa co-founders Damilare Kujembola and Timi Adeyeba. == Overview == Dispo has been compared to other image sharing and social networking services, most notably Instagram and VSCO, although users cannot immediately see the photos they have taken using the app. When a user attempts to take a photo, the interface mimics the developing process of a disposable camera. Users can take as many photos on the app as they want; they do not appear on the app however, until 9 am the next day. Once the set of photos appear on the app, users can choose to save them or share them with other users in a "roll". == Reception == Screen Rant has called the app "like Clubhouse [referring to the app] but for photos," comparing the early invite-only features of the apps. As it greatly restricts the user's editing options and sets out to offer a more authentic social networking experience, the app has been widely dubbed the "anti-Instagram". Between March 2021 and June 2021, the app reached the top ten in the App Store's photo/video rankings on 5 continents including in the US, Japan, Spain, Germany, Brazil, and Australia. It has been a notable success in Japan, where it opened its first international office in July 2021. In July 2021, NBA number one draft pick Cade Cunningham announced he had selected Dispo as his exclusive social media partner for the NBA draft.
Read more →
Automated dispensing cabinet

An automated dispensing cabinet (ADC), also called a unit-based cabinet (UBC), automated dispensing device (ADD), or automated dispensing machine (ADM)[1], is a computerized medicine cabinet for hospitals and healthcare settings. ADCs allow medications to be stored and dispensed near the point of care while controlling and tracking drug distribution. == Overview == Hospital pharmacies have provided medications for patients by filling patient-specific cassettes of unit-dose medications that were then delivered to the nursing unit and stored in medication cabinets or carts. ADCs, originally designed for hospital use, were introduced in hospitals in the 1980s and have facilitated the transition to alternative delivery models and more decentralized medication distribution systems.[2] Implementing automated dispensing cabinets as part of a decentralized or hybrid medication distribution system can improve patient safety and the accountability of the inventory, streamline certain billing processes. However, in the 2000s, the technology began to be deployed into other care settings where medication doses were stored onsite, and higher security methods were needed to control inventory, access, and dispensing of each patient dose. Settings that now deploy ADCs include long-term care facilities, hospice, critical access hospitals, surgery centers, group homes, residential care facilities, rehab and psych environments, animal health, dental clinics, and nursing education simulation. These diverse care settings share a common need to safely store, account for, and dispense individual doses of medications, especially narcotics and high-value medications, at the point of care.[3] ADCs track user access and dispensed medications, and their use can improve control over medication inventory. The real-time inventory reports generated by many cabinets can simplify the filling process and help the pharmacy track expired drugs. Furthermore, by restricting individual drugs – such as high-risk medications and controlled substances – to unique drawers within the cabinet, overall inventory management, patient safety, and medication security can be improved. Automated dispensing cabinets allow the pharmacy department to profile physician orders before they are dispensed.[4] ADCs can also enable providers to record medication charges upon dispensing, reducing the billing paperwork the pharmacy is responsible for. In addition, nurses can note returned medications using the cabinets' computers, enabling direct credits to patients' accounts. Since automated cabinets can be located on the nursing unit floor, nursing have speedier access to a patient's medications. Also, shorter waiting time ensures improved patient comfort and care.[5] == Role of automated dispensing in healthcare == Automated dispensing is a pharmacy practice in which a device dispenses medications and fills prescriptions. ADCs, which can handle many different medications, are available from a number of manufacturers such as BD, ARxIUM, and Omnicell. Though members of the pharmacy community have been utilizing automation technology since the 1980s, companies are constantly improving ADCs to meet changing needs and health standards in the industry. Several goals can be met by implementing an automated product in a healthcare facility. Patient safety can be ensured with the use of ADC technology such as barcoding. Anesthesia ADCs in operating rooms and perioperative areas may include label printing to prevent mix-ups such as errors between morphine and hydromorphone, two different opioid analgesics that frequently get confused. These systems also communicate with the pharmacy and its information management system to track medications removed and support inventory replenishment. == Key features == ADCs are like automated teller machines whose specific technologies such as barcode scanning and clinical decision support can improve medication safety. Some have metal locking drawers for added security and some have automated single-dose dispensing to prevent the need for a blind count each time a controlled substance is accessed. Over the years, ADCs have been adapted to facilitate compliance with emerging regulatory requirements such as pharmacy review of medication orders and safe practice recommendations. ADCs incorporate advanced software and electronic interfaces to synthesize high-risk steps in the medication use process. These unit-based medication repositories provide computer-controlled storage, dispensation, tracking, and documentation of medication distribution in the resident care unit. Since automated dispensing cabinets are not located in the pharmacy, they are considered "decentralized" medication distribution systems. Instead, they can be found at the point of care on the resident care unit. Tracking of the stocking and distribution process can occur by interfacing the unit with a central pharmacy computer. These cabinets can also be interfaced with other external databases such as resident profiles, the facility's admission/discharge/transfer system, and billing systems. Most ADC providers offer scalable systems since several important factors vary widely by facility such as budget, physical room size, patient population/demographics, type of healthcare facility, etc.
Read more →