AI Chatbot Design

AI Chatbot Design — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

  • You Only Look Once

    You Only Look Once

    You Only Look Once (YOLO) is a series of real-time object detection systems based on convolutional neural networks. First introduced by Joseph Redmon et al. in 2015, YOLO has undergone several iterations and improvements, becoming one of the most popular object detection frameworks. The name "You Only Look Once" refers to the fact that the algorithm requires only one forward propagation pass through the neural network to make predictions, unlike previous region proposal-based techniques like R-CNN that require thousands for a single image. == Overview == Compared to previous methods like R-CNN and OverFeat, instead of applying the model to an image at multiple locations and scales, YOLO applies a single neural network to the full image. This network divides the image into regions and predicts bounding boxes and probabilities for each region. These bounding boxes are weighted by the predicted probabilities. === OverFeat === OverFeat was an early influential model for simultaneous object classification and localization. Its architecture is as follows: Train a neural network for image classification only ("classification-trained network"). This could be one like the AlexNet. The last layer of the trained network is removed, and for every possible object class, initialize a network module at the last layer ("regression network"). The base network has its parameters frozen. The regression network is trained to predict the ( x , y ) {\displaystyle (x,y)} coordinates of two corners of the object's bounding box. During inference time, the classification-trained network is run over the same image over many different zoom levels and croppings. For each, it outputs a class label and a probability for that class label. Each output is then processed by the regression network of the corresponding class. This results in thousands of bounding boxes with class labels and probability. These boxes are merged until only one single box with a single class label remains. == Versions == There are two parts to the YOLO series. The original part contained YOLOv1, v2, and v3, all released on a website maintained by Joseph Redmon. === YOLOv1 === The original YOLO algorithm, introduced in 2015, divides the image into an S × S {\displaystyle S\times S} grid of cells. If the center of an object's bounding box falls into a grid cell, that cell is said to "contain" that object. Each grid cell predicts B bounding boxes and confidence scores for those boxes. These confidence scores reflect how confident the model is that the box contains an object and how accurate it thinks the box is that it predicts. In more detail, the network performs the same convolutional operation over each of the S 2 {\displaystyle S^{2}} patches. The output of the network on each patch is a tuple as follows: ( p 1 , … , p C , c 1 , x 1 , y 1 , w 1 , h 1 , … , c B , x B , y B , w B , h B ) {\displaystyle (p_{1},\dots ,p_{C},c_{1},x_{1},y_{1},w_{1},h_{1},\dots ,c_{B},x_{B},y_{B},w_{B},h_{B})} where p i {\displaystyle p_{i}} is the conditional probability that the cell contains an object of class i {\displaystyle i} , conditional on the cell containing at least one object. x j , y j , w j , h j {\displaystyle x_{j},y_{j},w_{j},h_{j}} are the center coordinates, width, and height of the j {\displaystyle j} -th predicted bounding box that is centered in the cell. Multiple bounding boxes are predicted to allow each prediction to specialize in one kind of bounding box. For example, slender objects might be predicted by j = 2 {\displaystyle j=2} while stout objects might be predicted by j = 1 {\displaystyle j=1} . c j {\displaystyle c_{j}} is the predicted intersection over union (IoU) of each bounding box with its corresponding ground truth. The network architecture has 24 convolutional layers followed by 2 fully connected layers. During training, for each cell, if it contains a ground truth bounding box, then only the predicted bounding boxes with the highest IoU with the ground truth bounding boxes is used for gradient descent. Concretely, let j {\displaystyle j} be that predicted bounding box, and let i {\displaystyle i} be the ground truth class label, then x j , y j , w j , h j {\displaystyle x_{j},y_{j},w_{j},h_{j}} are trained by gradient descent to approach the ground truth, p i {\displaystyle p_{i}} is trained towards 1 {\displaystyle 1} , other p i ′ {\displaystyle p_{i'}} are trained towards zero. If a cell contains no ground truth, then only c 1 , c 2 , … , c B {\displaystyle c_{1},c_{2},\dots ,c_{B}} are trained by gradient descent to approach zero. === YOLOv2 === Released in 2016, YOLOv2 (also known as YOLO9000) improved upon the original model by incorporating batch normalization, a higher resolution classifier, and using anchor boxes to predict bounding boxes. It could detect over 9000 object categories. It was also released on GitHub under the Apache 2.0 license. === YOLOv3 === YOLOv3, introduced in 2018, contained only "incremental" improvements, including the use of a more complex backbone network, multiple scales for detection, and a more sophisticated loss function. === YOLOv4 and beyond === Subsequent versions of YOLO (v4, v5, etc.) have been developed by different researchers, further improving performance and introducing new features. These versions are not officially associated with the original YOLO authors but build upon their work. As of 2026, versions up to YOLO26 have been released..

    Read more →
  • Deductive language

    Deductive language

    A deductive language is a computer programming language in which the program is a collection of predicates ('facts') and rules that connect them. Such a language is used to create knowledge based systems or expert systems which can deduce answers to problem sets by applying the rules to the facts they have been given. An example of a deductive language is Prolog, or its database-query cousin, Datalog. == History == As the name implies, deductive languages are rooted in the principles of deductive reasoning; making inferences based upon current knowledge. The first recommendation to use a clausal form of logic for representing computer programs was made by Cordell Green (1969) at Stanford Research Institute (now SRI International). This idea can also be linked back to the battle between procedural and declarative information representation in early artificial intelligence systems. Deductive languages and their use in logic programming can also be dated to the same year when Foster and Elcock introduced Absys, the first deductive/logical programming language. Shortly after, the first Prolog system was introduced in 1972 by Colmerauer through collaboration with Robert Kowalski. == Components == The components of a deductive language are a system of formal logic and a knowledge base upon which the logic is applied. === Formal Logic === Formal logic is the study of inference in regards to formal content. The distinguishing feature between formal and informal logic is that in the former case, the logical rule applied to the content is not specific to a situation. The laws hold regardless of a change in context. Although first-order logic is described in the example below to demonstrate the uses of a deductive language, no formal system is mandated and the use of a specific system is defined within the language rules or grammar. As input, a predicate takes any object(s) in the domain of interest and outputs either one of two Boolean values: true or false. For example, consider the sentences "Barack Obama is the 44th president" and "If it rains today, I will bring an umbrella". The first is a statement with an associated truth value. The second is a conditional statement relying on the value of some other statement. Either of these sentences can be broken down into predicates which can be compared and form the knowledge base of a deductive language. Moreover, variables such as 'Barack Obama' or 'president' can be quantified over. For example, take 'Barack Obama' as variable 'x'. In the sentence "There exists an 'x' such that if 'x' is the president, then 'x' is the commander in chief." This is an example of the existential quantifier in first order logic. Take 'president' to be the variable 'y'. In the sentence "For every 'y', 'y' is the leader of their nation." This is an example of the universal quantifier. === Knowledge Base === A collection of 'facts' or predicates and variables form the knowledge base of a deductive language. Depending on the language, the order of declaration of these predicates within the knowledge base may or may not influence the result of applying logical rules. Upon application of certain 'rules' or inferences, new predicates may be added to a knowledge base. As new facts are established or added, they form the basis for new inferences. As the core of early expert systems, artificial intelligence systems which can make decisions like an expert human, knowledge bases provided more information than databases. They contained structured data, with classes, subclasses, and instances. == Prolog == Prolog is an example of a deductive, declarative language that applies first- order logic to a knowledge base. To run a program in Prolog, a query is posed and based upon the inference engine and the specific facts in the knowledge base, a result is returned. The result can be anything appropriate from a new relation or predicate, to a literal such as a Boolean (true/false), depending on the engine and type system.

    Read more →
  • Tandem Money

    Tandem Money

    Tandem is one of the UK's original challenger banks. Tandem is a digital bank with a mobile app, and no branches. The acquisition of Harrods Bank in 2017 allowed the company to provide services using the former's banking licence. Tandem Bank Limited is authorised by the Prudential Regulation Authority and regulated by the Financial Conduct Authority. Tandem has offices across the UK in Blackpool, Cardiff, Durham and London, employing over 500 people. == History == The company was founded by Ricky Knox, Matt Cooper and Michael Kent in 2014. In December 2016, Tandem announced that it had secured a £35 million investment from The Sanpower Group, the Chinese company that also owned the department store House of Fraser; however, £29 million of this investment was later revoked by Sanpower over concerns that the Chinese Government would object to the investment following increased restrictions on outbound investment in China. This resulted in a delay in the launch of Tandem's savings products, which, at the time of the revocation, was expected imminently and, more importantly, meant that Tandem volunteered the return of their banking license but retained all other permissions. In April 2018, Tandem launched fixed-term savings accounts, offering one-, two- and three-year terms through its app. === Acquisitions === In August 2017, it was announced that Tandem would fully acquire Harrods Bank, founded in 1893, in a deal that would bring a near-£200m loan book, over £300m of deposits and nearly £80 million of capital. Prior to its sale to Tandem Money, Harrods Bank catered for high-net-worth (HNW) individuals and operated from the Harrods store in Knightsbridge, London. It offered a variety of personal and business current and savings accounts, mortgages, foreign currency and gold bullion trading services. On 7 August 2017, Tandem Money Limited announced a deal to acquire 100% of Harrods Bank Limited shares. The purchase deal closed successfully on 11 January 2018. In March 2018, Tandem agreed to acquire Pariti Technologies Limited, developers of the Pariti money management application. In August 2020 Tandem acquired green home improvement loan specialists Allium Lending Group. It was announced on 8 February 2021 that Tandem had agreed to purchase the mortgage book from private bank Bank and Clients, consisting of 300 B&C customers for an undisclosed amount. In January 2022 Tandem Bank acquired consumer lender Oplo, creating a combined business with £1.2 billion of total assets. In April 2023, it was announced that Tandem had acquired money-sharing app Loop Money. At the time of the purchase, one of Loop's founders – Paul Pester – was also chairman at Tandem. == Features == Tandem Bank offers customers savings, mortgages, personal and secured loans, green home improvement loans and motor finance. In November 2022, the bank launched its new Tandem Marketplace, providing information and resources to help promote greener living.

    Read more →
  • Event condition action

    Event condition action

    Event condition action (ECA) is a short-cut for referring to the structure of active rules in event-driven architecture and active database systems. Such a rule traditionally consisted of three parts: The event part specifies the signal that triggers the invocation of the rule The condition part is a logical test that, if satisfied or evaluates to true, causes the action to be carried out The action part consists of updates or invocations on the local data This structure was used by the early research in active databases which started to use the term ECA. Current state of the art ECA rule engines use many variations on rule structure. Also other features not considered by the early research is introduced, such as strategies for event selection into the event part. In a memory-based rule engine, the condition could be some tests on local data and actions could be updates to object attributes. In a database system, the condition could simply be a query to the database, with the result set (if not null) being passed to the action part for changes to the database. In either case, actions could also be calls to external programs or remote procedures. Note that for database usage, updates to the database are regarded as internal events. As a consequence, the execution of the action part of an active rule can match the event part of the same or another active rule, thus triggering it. The equivalent in a memory-based rule engine would be to invoke an external method that caused an external event to trigger another ECA rule. ECA rules can also be used in rule engines that use variants of the Rete algorithm for rule processing. == ECA rule engines == Rulecore Concurrent Rules Apart Database Detect Invocation Rules ConceptBase ECArules

    Read more →
  • Glossary of machine vision

    Glossary of machine vision

    The following are common definitions related to the machine vision field. General related fields Machine vision Computer vision Image processing Signal processing == 0-9 == 1394. FireWire is Apple Inc.'s brand name for the IEEE 1394 interface. It is also known as i.Link (Sony's name) or IEEE 1394 (although the 1394 standard also defines a backplane interface). It is a personal computer (and digital audio/digital video) serial bus interface standard, offering high-speed communications and isochronous real-time data services. 1D. One-dimensional. 2D computer graphics. The computer-based generation of digital images—mostly from two-dimensional models (such as 2D geometric models, text, and digital images) and by techniques specific to them. 3D computer graphics. 3D computer graphics are different from 2D computer graphics in that a three-dimensional representation of geometric data is stored in the computer for the purposes of performing calculations and rendering 2D images. Such images may be for later display or for real-time viewing. Despite these differences, 3D computer graphics rely on many of the same algorithms as 2D computer vector graphics in the wire frame model and 2D computer raster graphics in the final rendered display. In computer graphics software, the distinction between 2D and 3D is occasionally blurred; 2D applications may use 3D techniques to achieve effects such as lighting, and primarily 3D may use 2D rendering techniques. 3D scanner. This is a device that analyzes a real-world object or environment to collect data on its shape and possibly color. The collected data can then be used to construct digital, three dimensional models useful for a wide variety of applications. == A == Aberration. Optically, defocus refers to a translation along the optical axis away from the plane or surface of best focus. In general, defocus reduces the sharpness and contrast of the image. What should be sharp, high-contrast edges in a scene become gradual transitions. Algebraic distance or algebraic error. The algebraic distance from a point xi to a curve or surface defined by f ( x , β ) = 0 {\displaystyle f(x,\beta )=0} is the value of f ( x i , β ) {\displaystyle f(x_{i},\beta )} , i.e. the residual in the least squares problem with data point (xi, 0) and model function f. This term is mainly used in computer vision.[1][2] Aperture. In context of photography or machine vision, aperture refers to the diameter of the aperture stop of a photographic lens. The aperture stop can be adjusted to control the amount of light reaching the film or image sensor. aspect ratio (image). The aspect ratio of an image is its displayed width divided by its height (usually expressed as "x:y"). Angular resolution. Describes the resolving power of any image forming device such as an optical or radio telescope, a microscope, a camera, or an eye. Automated optical inspection. == B == Barcode. A barcode (also bar code) is a machine-readable representation of information in a visual format on a surface. Blob discovery. Inspecting an image for discrete blobs of connected pixels (e.g. a black hole in a grey object) as image landmarks. These blobs frequently represent optical targets for machining, robotic capture, or manufacturing failure. Bitmap. A raster graphics image, digital image, or bitmap, is a data file or structure representing a generally rectangular grid of pixels, or points of color, on a computer monitor, paper, or other display device. == C == Camera. A camera is a device used to take pictures, either singly or in sequence. A camera that takes pictures singly is sometimes called a photo camera to distinguish it from a video camera. Camera Link. Camera Link is a serial communication protocol designed for computer vision applications based on the National Semiconductor interface Channel-link. It was designed for the purpose of standardizing scientific and industrial video products including cameras, cables and frame grabbers. The standard is maintained and administered by the Automated Imaging Association, or AIA, the global machine vision industry's trade group. Charge-coupled device. A charge-coupled device (CCD) is a sensor for recording images, consisting of an integrated circuit containing an array of linked, or coupled, capacitors. CCD sensors and cameras tend to be more sensitive, less noisy, and more expensive than CMOS sensors and cameras. CIE 1931 Color Space. In the study of the perception of color, one of the first mathematically defined color spaces was the CIE XYZ color space (also known as CIE 1931 color space), created by the International Commission on Illumination (CIE) in 1931. CMOS. CMOS ("see-moss")stands for complementary metal-oxide semiconductor, is a major class of integrated circuits. CMOS imaging sensors for machine vision are cheaper than CCD sensors but more noisy. CoaXPress. CoaXPress (CXP) is an asymmetric high speed serial communication standard over coaxial cable. CoaXPress combines high speed image data, low speed camera control and power over a single coaxial cable. The standard is maintained by JIIA, the Japan Industrial Imaging Association. Color. The perception of the frequency (or wavelength) of light, and can be compared to how pitch (or a musical note) is the perception of the frequency or wavelength of sound. Color blindness. Also known as color vision deficiency, in humans is the inability to perceive differences between some or all colors that other people can distinguish Color temperature. "White light" is commonly described by its color temperature. A traditional incandescent light source's color temperature is determined by comparing its hue with a theoretical, heated black-body radiator. The lamp's color temperature is the temperature in kelvins at which the heated black-body radiator matches the hue of the lamp. Color vision. CV is the capacity of an organism or machine to distinguish objects based on the wavelengths (or frequencies) of the light they reflect or emit. computer vision. The study and application of methods which allow computers to "understand" image content. Contrast. In visual perception, contrast is the difference in visual properties that makes an object (or its representation in an image) distinguishable from other objects and the background. C-Mount. Standardized adapter for optical lenses on CCD - cameras. C-Mount lenses have a back focal distance 17.5 mm vs. 12.5 mm for "CS-mount" lenses. A C-Mount lens can be used on a CS-Mount camera through the use of a 5 mm extension adapter. C-mount is a 1" diameter, 32 threads per inch mounting thread (1"-32UN-2A.) CS-Mount. Same as C-Mount but the focal point is 5 mm shorter. A CS-Mount lens will not work on a C-Mount camera. CS-mount is a 1" diameter, 32 threads per inch mounting thread. == D == Data matrix. A two dimensional Barcode. Depth of field. In optics, particularly photography and machine vision, the depth of field (DOF) is the distance in front of and behind the subject which appears to be in focus. Depth perception. DP is the visual ability to perceive the world in three dimensions. It is a trait common to many higher animals. Depth perception allows the beholder to accurately gauge the distance to an object. Diaphragm. In optics, a diaphragm is a thin opaque structure with an opening (aperture) at its centre. The role of the diaphragm is to stop the passage of light, except for the light passing through the aperture. == E == Edge detection. ED marks the points in a digital image at which the luminous intensity changes sharply. It also marks the points of luminous intensity changes of an object or spatial-taxon silhouette. Electromagnetic interference. Radio Frequency Interference (RFI) is electromagnetic radiation which is emitted by electrical circuits carrying rapidly changing signals, as a by-product of their normal operation, and which causes unwanted signals (interference or noise) to be induced in other circuits. == F == FireWire. FireWire (also known as i. Link or IEEE 1394) is a personal computer (and digital audio/video) serial bus interface standard, offering high-speed communications. It is often used as an interface for industrial cameras. Fixed-pattern noise. Flat-field correction. Frame grabber. An electronic device that captures individual, digital still frames from an analog video signal or a digital video stream. Fringe Projection Technique. 3D data acquisition technique employing projector displaying fringe pattern on a surface of measured piece, and one or more cameras recording image(s). Field of view. The field of view (FOV) is the part which can be seen by the machine vision system at one moment. The field of view depends from the lens of the system and from the working distance between object and camera. Focus. An image, or image point or region, is said to be in focus if light from object points is converged about as well as possible in the image; conversely, it is out of focus if light is not w

    Read more →
  • Soterml

    Soterml

    SoTerML (Soil and Terrain Markup Language) is a XML-based markup language for storing and exchanging soil and terrain related data. SoTerML development is being done within The e-SoTer Platform. GEOSS plans a global Earth Observation System and, within this framework, the e-SOTER project addresses the felt need for a global soil and terrain database. The Centre for Geospatial Science (Currently Nottingham Geospatial Institute) at the University of Nottingham has initiated the development since January 2009. Further development and maintenance is currently handled in National Soil Resources Institute (NSRI) at Cranfield University, UK. The role of CGS is within the development of the e-SOTER dissemination platform, which is based on INSPIRE principles. The SoTerML development included: 1. Development of a data dictionary for nomenclatures and various data sources (data and metadata). 2. Development of an exchange format/procedures from the World Reference Base 2006.

    Read more →
  • Clipping (computer graphics)

    Clipping (computer graphics)

    Clipping, in the context of computer graphics, is a method to selectively enable or disable rendering operations within a defined region of interest. Mathematically, clipping can be described using the terminology of constructive geometry. A rendering algorithm only draws pixels in the intersection between the clip region and the scene model. Lines and surfaces outside the view volume (aka. frustum) are removed. Clip regions are commonly specified to improve render performance. Pixels that will be drawn are said to be within the clip region. Pixels that will not be drawn are outside the clip region. More informally, pixels that will not be drawn are said to be "clipped." == In 2D graphics == In two-dimensional graphics, a clip region may be defined so that pixels are only drawn within the boundaries of a window or frame. Clip regions can also be used to selectively control pixel rendering for aesthetic or artistic purposes. In many implementations, the final clip region is the composite (or intersection) of one or more application-defined shapes, as well as any system hardware constraints In one example application, consider an image editing program. A user application may render the image into a viewport. As the user zooms and scrolls to view a smaller portion of the image, the application can set a clip boundary so that pixels outside the viewport are not rendered. In addition, GUI widgets, overlays, and other windows or frames may obscure some pixels from the original image. In this sense, the clip region is the composite of the application-defined "user clip" and the "device clip" enforced by the system's software and hardware implementation. Application software can take advantage of this clip information to save computation time, energy, and memory, avoiding work related to pixels that aren't visible. == In 3D graphics == In three-dimensional graphics, the terminology of clipping can be used to describe many related features. Typically, "clipping" refers to operations in the plane that work with rectangular shapes, and "culling" refers to more general methods to selectively process scene model elements. This terminology is not rigid, and exact usage varies among many sources. Scene model elements include geometric primitives: points or vertices; line segments or edges; polygons or faces; and more abstract model objects such as curves, splines, surfaces, and even text. In complicated scene models, individual elements may be selectively disabled (clipped) for reasons including visibility within the viewport (frustum culling); orientation (backface culling), obscuration by other scene or model elements (occlusion culling, depth- or "z" clipping). Sophisticated algorithms exist to efficiently detect and perform such clipping. Many optimized clipping methods rely on specific hardware acceleration logic provided by a graphics processing unit (GPU). The concept of clipping can be extended to higher dimensionality using methods of abstract algebraic geometry. === Near clipping === Beyond projection of vertices & 2D clipping, near clipping is required to correctly rasterise 3D primitives; this is because vertices may have been projected behind the eye. Near clipping ensures that all the vertices used have valid 2D coordinates. Together with far-clipping it also helps prevent overflow of depth-buffer values. Some early texture mapping hardware (using forward texture mapping) in video games suffered from complications associated with near clipping and UV coordinates. === Occlusion clipping (Z- or depth clipping) === In 3D computer graphics, "Z" often refers to the depth axis in the system of coordinates centered at the viewport origin: "Z" is used interchangeably with "depth", and conceptually corresponds to the distance "into the virtual screen." In this coordinate system, "X" and "Y" therefore refer to a conventional cartesian coordinate system laid out on the user's screen or viewport. This viewport is defined by the geometry of the viewing frustum, and parameterizes the field of view. Z-clipping, or depth clipping, refers to techniques that selectively render certain scene objects based on their depth relative to the screen. Most graphics toolkits allow the programmer to specify a "near" and "far" clip depth, and only portions of objects between those two planes are displayed. A creative application programmer can use this method to render visualizations of the interior of a 3D object in the scene. For example, a medical imaging application could use this technique to render the organs inside a human body. A video game programmer can use clipping information to accelerate game logic. For example, a tall wall or building that occludes other game entities can save GPU time that would otherwise be spent transforming and texturing items in the rear areas of the scene; and a tightly integrated software program can use this same information to save CPU time by optimizing out game logic for objects that aren't seen by the player. == Algorithms == Line clipping algorithms: Cohen–Sutherland Liang–Barsky Fast-clipping Cyrus–Beck Nicholl–Lee–Nicholl Skala O(lg N) algorithm Polygon clipping algorithms: Greiner–Hormann Sutherland–Hodgman Weiler–Atherton Vatti Rendering methodologies Painter's algorithm

    Read more →
  • User-defined function

    User-defined function

    A user-defined function (UDF) is a function provided by the user of a program or environment, in a context where the usual assumption is that functions are built into the program or environment. UDFs are usually written for the requirement of its creator. == BASIC language == In some old implementations of the BASIC programming language, user-defined functions are defined using the "DEF FN" syntax. More modern dialects of BASIC are influenced by the structured programming paradigm, where most or all of the code is written as user-defined functions or procedures, and the concept becomes practically redundant. == COBOL language == In the COBOL programming language, a user-defined function is an entity that is defined by the user by specifying a FUNCTION-ID paragraph. A user-defined function must return a value by specifying the RETURNING phrase of the procedure division header and they are invoked using the function-identifier syntax. See the ISO/IEC 1989:2014 Programming Language COBOL standard for details. As of May 2022, the IBM Enterprise COBOL for z/OS 6.4 (IBM COBOL) compiler contains support for user-defined functions. == Databases == In relational database management systems, a user-defined function provides a mechanism for extending the functionality of the database server by adding a function, that can be evaluated in standard query language (usually SQL) statements. The SQL standard distinguishes between scalar and table functions. A scalar function returns only a single value (or NULL), whereas a table function returns a (relational) table comprising zero or more rows, each row with one or more columns. User-defined functions in SQL are declared using the CREATE FUNCTION statement. For example, a user-defined function that converts Celsius to Fahrenheit (a temperature scale used in USA) might be declared like this: Once created, a user-defined function may be used in expressions in SQL statements. For example, it can be invoked where most other intrinsic functions are allowed. This also includes SELECT statements, where the function can be used against data stored in tables in the database. Conceptually, the function is evaluated once per row in such usage. For example, assume a table named Elements, with a row for each known chemical element. The table has a column named BoilingPoint for the boiling point of that element, in Celsius. The query would retrieve the name and the boiling point from each row. It invokes the CtoF user-defined function as declared above in order to convert the value in the column to a value in Fahrenheit. Each user-defined function carries certain properties or characteristics. The SQL standard defines the following properties: Language - defines the programming language in which the user-defined function is implemented; examples include SQL, C, C# and Java. Parameter style - defines the conventions that are used to pass the function parameters and results between the implementation of the function and the database system (only applicable if language is not SQL). Specific name - a name for the function that is unique within the database. Note that the function name does not have to be unique, considering overloaded functions. Some SQL implementations require that function names are unique within a database, and overloaded functions are not allowed. Determinism - specifies whether the function is deterministic or not. The determinism characteristic has an influence on the query optimizer when compiling a SQL statement. SQL-data access - tells the database management system whether the function contains no SQL statements (NO SQL), contains SQL statements but does not access any tables or views (CONTAINS SQL), reads data from tables or views (READS SQL DATA), or actually modifies data in the database (MODIFIES SQL DATA). User-defined functions should not be confused with stored procedures. Stored procedures allow the user to group a set of SQL commands. A procedure can accept parameters and execute its SQL statements depending on those parameters. A procedure is not an expression and, thus, cannot be used like user-defined functions. Some database management systems allow the creation of user defined functions in languages other than SQL. Microsoft SQL Server, for example, allows the user to use .NET languages including C# for this purpose. DB2 and Oracle support user-defined functions written in C or Java programming languages. === SQL Server 2000 === There are three types of UDF in Microsoft SQL Server 2000: scalar functions, inline table-valued functions, and multistatement table-valued functions. Scalar functions return a single data value (not a table) with RETURNS clause. Scalar functions can use all scalar data types, with exception of timestamp and user-defined data types. Inline table-valued functions return the result set of a single SELECT statement. Multistatement table-valued functions return a table, which was built with many TRANSACT-SQL statements. User-defined functions can be invoked from a query like built‑in functions such as OBJECT_ID, LEN, DATEDIFF, or can be executed through an EXECUTE statement like stored procedures. Performance Notes: User-defined functions are subroutines made of one or more Transact-SQL statements that can be used to encapsulate code for reuse. It takes zero or more arguments and evaluates a return value. Has both control-flow and DML statements in its body similar to stored procedures. Does not allow changes to any Global Session State, like modifications to database or external resource, such as a file or network. Does not support output parameter. DEFAULT keyword must be specified to pass the default value of parameter. Errors in UDF cause UDF to abort which, in turn, aborts the statement that invoked the UDF. === Apache Hive === Apache Hive defines, in addition to the regular user-defined functions (UDF), also user-defined aggregate functions (UDAF) and table-generating functions (UDTF). Hive enables developers to create their own custom functions with Java. === Apache Doris === Apache Doris, an open-source real-time analytical database, allows external users to contribute their own UDFs written in C++ to it.

    Read more →
  • Minimum resolvable contrast

    Minimum resolvable contrast

    Minimum resolvable contrast (MRC) is a subjective measure of a visible spectrum sensor’s or camera's sensitivity and ability to resolve data. A snapshot image of a series of three bar targets of selected spatial frequencies and various contrast coatings captured by the unit under test (UUT) is used to determine the MRC of the UUT, i.e., the visible spectrum camera or sensor. A trained observer selects the smallest target resolvable at each contrast level. Typically, specialized computer software collects the inputted data of the observer and provides a graph of contrast vs. spatial frequency at a given luminance level. A first order polynomial is fitted to the data and an MRC curve of spatial frequency versus contrast is generated.

    Read more →
  • Film recorder

    Film recorder

    A film recorder is a graphical output device for transferring images to photographic film from a digital source. In a typical film recorder, an image is passed from a host computer to a mechanism to expose film through a variety of methods, historically by direct photography of a high-resolution cathode-ray tube (CRT) display. The exposed film can then be developed using conventional developing techniques, and displayed with a slide or motion picture projector. The use of film recorders predates the current use of digital projectors, which eliminate the time and cost involved in the intermediate step of transferring computer images to film stock, instead directly displaying the image signal from a computer. Motion picture film scanners are the opposite of film recorders, copying content from film stock to a computer system. Film recorders can be thought of as modern versions of kinescopes. == Design == === Operation === All film recorders typically work in the same manner. The image is fed from a host computer as a raster stream over a digital interface. A film recorder exposes film through various mechanisms; flying spot (early recorders); photographing a high resolution video monitor; electron beam recorder (Sony HDVS); a CRT scanning dot (Celco); focused beam of light from a light valve technology (LVT) recorder; a scanning laser beam (Arrilaser); or recently, full-frame LCD array chips. For color image recording on a CRT film recorder, the red, green, and blue channels are sequentially displayed on a single gray scale CRT, and exposed to the same piece of film as a multiple exposure through a filter of the appropriate color. This approach yields better resolution and color quality than possible with a tri-phosphor color CRT. The three filters are usually mounted on a motor-driven wheel. The filter wheel, as well as the camera's shutter, aperture, and film motion mechanism are usually controlled by the recorder's electronics and/or the driving software. CRT film recorders are further divided into analog and digital types. The analog film recorder uses the native video signal from the computer, while the digital type uses a separate display board in the computer to produce a digital signal for a display in the recorder. Digital CRT recorders provide a higher resolution at a higher cost compared to analog recorders due to the additional specialized hardware. Typical resolutions for digital recorders were quoted as 2K and 4K, referring to 2048×1366 and 4096×2732 pixels, respectively, while analog recorders provided a resolution of 640×428 pixels in comparison. Higher-quality LVT film recorders use a focused beam of light to write the image directly onto a film loaded spinning drum, one pixel at a time. In one example, the light valve was a liquid-crystal shutter, the light beam was steered with a lens, and text was printed using a pre-cut optical mask. The LVT will record pixel beyond grain. Some machines can burn 120-res or 120 lines per millimeter. The LVT is basically a reverse drum scanner. The exposed film is developed and printed by regular photographic chemical processing. === Formats === Film recorders are available for a variety of film types and formats. The 35 mm negative film and transparencies are popular because they can be processed by any photo shop. Single-image 4×5 film and 8×10 are often used for high-quality, large format printing. Some models have detachable film holders to handle multiple formats with the same camera or with Polaroid backs to provide on-site review of output before exposing film. == Uses == Film recorders are used in digital printing to generate master negatives for offset and other bulk printing processes. For preview, archiving, and small-volume reproduction, film recorders have been rendered obsolete by modern printers that produce photographic-quality hardcopies directly on plain paper. They are also used to produce the master copies of movies that use computer animation or other special effects based on digital image processing. However, most cinemas nowadays use Digital Cinema Packages on hard drives instead of film stock. === Computer graphics === Film recorders were among the earliest computer graphics output devices; for example, the IBM 740 CRT Recorder was announced in 1954. Film recorders were also commonly used to produce slides for slide projectors; but this need is now largely met by video projectors that project images directly from a computer to a screen. The terms "slide" and "slide deck" are still commonly used in presentation programs. === Current uses === Currently, film recorders are primarily used in the motion picture film-out process for the ever increasing amount of digital intermediate work being done. Although significant advances in large venue video projection alleviates the need to output to film, there remains a deadlock between the motion picture studios and theater owners over who should pay for the cost of these very costly projection systems. This, combined with the increase in international and independent film production, will keep the demand for film recording steady for at least a decade. == Key manufacturers == Traditional film recorder manufacturers have all but vanished from the scene or have evolved their product lines to cater to the motion picture industry. Dicomed was one such early provider of digital color film recorders. Polaroid, Management Graphics, Inc, MacDonald-Detwiler, Information International, Inc., and Agfa were other producers of film recorders. Arri is the only current major manufacturer of film recorders. Kodak Lightning I film recorder. One of the first laser recorders. Needed an engineering staff to set up. Kodak Lightning II film recorder used both gas and diode laser to record on to film. The last LVT machines produced by Kodak / Durst-Dice stopped production in 2002. There are no LVT film recorders currently being produced. LVT Saturn 1010 uses a LED exposure (RGB) to 8"x10" film at 1000-3000ppi. LUX Laser Cinema Recorder from Autologic/Information International in Thousand Oaks, California. Sales end in March 2000. Used on the 1997 film “Titanic”. Arri produces the Arrilaser line of laser-based motion picture film recorders. MGI produced the Solitaire line of CRT-based motion picture film recorders. Matrix, originally ImaPRO, a branch of Agfa Division, produced the QCR line of CRT-based motion picture film recorders. CCG, formerly Agfa film recorders, has been a steady manufacturer of film recorders based in Germany. In 2004 CCG introduced Definity, a motion picture film recorder utilizing LCD technology. In 2010 CCG introduced the first full LED LCD film recorder as a new step in film recording. Cinevator was made by Cinevation AS, in Drammen, Norway. The Cinevator was a real-time digital film recorder. It could record IN, IP and prints with and without sound Oxberry produced the Model 3100 film recorder camera system, with interchangeable pin-registered movements (shuttles) for 35 mm (full frame/Silent, 1.33:1) and 16 mm (regular 16, "2R"), and others have adapted the Oxberry movements for CinemaScope, 1.85:1, 1.75:1, 1.66:1, as well as Academy/Sound (1.37:1) in 35 mm and Super-16 in 16 mm ("1R"). For instance, the "Solitaire" and numerous others employed the Oxberry 3100 camera system. == History == Before video tape recorders or VTRs were invented, TV shows were either broadcast live or recorded to film for later showing, using the kinescope process. In 1967, CBS Laboratories introduced the Electronic Video Recording format, which used video and telecined-to-video film sources, which were then recorded with an electron-beam recorder at CBS' EVR mastering plant at the time to 35mm film stock in a rank of 4 strips on the film, which was then slit down to 4 8.75 mm (0.344 in) film copies, for playback in an EVR player. All types of CRT recorders were (and still are) used for film recording. Some early examples used for computer-output recording were the 1954 IBM 740 CRT Recorder, and the 1962 Stromberg-Carlson SC-4020, the latter using a Charactron CRT for text and vector graphic output to either 16 mm motion picture film, 16 mm microfilm, or hard-copy paper output. Later 1970 and 80s-era recording to B&W (and color, with 3 separate exposures for red, green, and blue)) 16 mm film was done with an EBR (Electron Beam Recorder), the most prominent examples made by 3M), for both video and COM (Computer Output Microfilm) applications. Image Transform in Universal City, California used specially modified 3M EBR film recorders that could perform color film-out recording on 16 mm by exposing three 16 mm frames in a row (one red, one green and one blue). The film was then printed to color 16 mm or 35 mm film. The video fed to the recorder could either be NTSC, PAL or SECAM. Later, Image Transform used specially modified VTRs to record 24 frame for their "Image Vision" system. The modified 1 inch type B videotape VTRs would record

    Read more →
  • Anthem medical data breach

    Anthem medical data breach

    The Anthem medical data breach was a medical data breach of information held by Elevance Health, known at that time as Anthem Inc. On February 4, 2015, Anthem, Inc. disclosed that criminal hackers had broken into its servers and had potentially stolen over 37.5 million records that contain personally identifiable information from its servers. On February 24, 2015 Anthem raised the number to 78.8 million people whose personal information had been affected. According to Anthem, Inc., the data breach extended into multiple brands Anthem, Inc. uses to market its healthcare plans, including, Anthem Blue Cross, Anthem Blue Cross and Blue Shield, Blue Cross and Blue Shield of Georgia, Empire Blue Cross and Blue Shield, Amerigroup, Caremore, and UniCare. Healthlink says that it was also a victim. Anthem says users' medical information and financial data were not compromised. Anthem has offered free credit monitoring in the wake of the breach. Michael Daniel, chief adviser on cybersecurity for President Barack Obama, said he would be changing his own password. According to The New York Times, about 80 million company records were hacked, and there is a fear that the stolen data will be used for identity theft. The compromised information contained names, birthdays, medical IDs, social security numbers, street addresses, e-mail addresses and employment information, including income data. == Theft of the data == The data was stolen over a period of weeks the month before the data breach was discovered. Because no medical information was compromised, Anthem was not required by law to encrypt the data. However, Anthem faced several civil class-action lawsuits, which were settled in 2017 at a cost of $115 million. Anthem did not admit any wrongdoing in the settlement. Data from the attack is expected to be sold on the black market. == Impact == Persons whose data was stolen could have resulting problems about identity theft for the rest of their lives. Anthem had a US$100 million insurance policy for cyber problems from American International Group. One report suggested that all of this money could be consumed by the process of notifying customers of the breach. == Responses == Anthem hired Mandiant, a cybersecurity firm, to review their security systems and advised people whose data was stolen to monitor their accounts and remain vigilant. The theft of the data raised fears generally about the theft of medical information. A writer from Harvard Law School suggested that this data breach might spark reform of security practices and government data safety regulation. An investigation conducted by several state insurance commissioners blames the breach on an attacker whose identity was withheld, and claims that the breach was likely ordered by a foreign government whose name was withheld. It also concluded that Anthem had taken reasonable measures to protect its data before the breach and that its remediation plan was effective at shutting down the breach once it was discovered. It also marks the starting date of the breach as February 18, 2014. The lead investigator was the Indiana Department of Insurance (DOI) -- Anthem's principal regulator, because Anthem is headquartered in Indiana. The Indiana DOI hired independent auditors to conduct a security assessment at Anthem, which concluded, "While deficiencies within Anthem’s cybersecurity posture were noted by the Examination Team, these deficiencies were not, in our experience, uncommon to companies comparable to Anthem in size and scope. While the pre-breach deficiencies impacted Anthem’s ability to reduce the likelihood of and quickly detect the Data Breach, the controls implemented subsequent to the Data Breach should improve Anthem’s ability to detect future breaches and enable Anthem to respond more effectively to a future attack than was the case in this instance." Federal regulators also conducted an investigation of the Anthem data breach, resulting in a $16 million settlement between Anthem and the Department of Health and Human Services (HHS) -- by far the largest HHS data breach settlement. An HHS Director overseeing the investigation said, "The largest health data breach in U.S. history fully merits the largest HIPAA settlement in history. Unfortunately, Anthem failed to implement appropriate measures for detecting hackers who had gained access to their system to harvest passwords and steal people's private information." The HHS settlement also required Anthem to perform a risk assessment and correct any identified deficiencies in its cybersecurity, with HHS oversight of Anthem's progress. Approximately 100 private class action lawsuits were filed against Anthem over the data breach and consolidated in California federal court, in front of Judge Koh, a respected authority in data breach litigation. After contested briefing over who should lead the litigation efforts, Judge Koh appoints Eve Cervantez of Altshuler Berzon and Andy Friedman of Cohen Milstein as co-lead counsel, and appointed Eric Gibbs of Gibbs Law Group and Michael Sobel of Lieff Cabraser to head a Plaintiffs' Steering Committee. In 2017, Anthem agreed to settle the litigation for $115 million, the largest ever data breach settlement at the time. The attorneys requested $38 million in fees for their work on the case, but Judge Koh slashed the fee request, finding that only $31 million in fees were merited.

    Read more →
  • International Road Traffic and Accident Database

    International Road Traffic and Accident Database

    The International Road Traffic and Accident Database (IRTAD) is an initiative dedicated to compiling and analyzing global road crash data. It is managed by the International Transport Forum (ITF) under the auspices of its permanent working group, which specializes in road safety, commonly referred to as the IRTAD Group. The primary objective of IRTAD is to provide a robust empirical basis for international comparisons in the field of road safety and to offer data to support the formulation of effective road safety policies. == Data availability == A portion of the data gathered by IRTAD is accessible for free through the OECD statistics website, however the remaining data requires a subscription for access. == History == The IRTAD database was originally started in 1988 by Germany's Federal Institution for Roads (BASt) in response to demands for international comparative data. It was later taken over and expanded by the International Transport Forum and has grown to be an important resource for comparing road safety metrics between countries worldwide, although mostly in the developed world. Every year, the ITF publishes comparative and country-by-country road safety data gathered for the IRTAD database and analysed by the IRTAD Group in the ITF Road Safety Annual Report, informally known as "IRTAD Report". Over the years, the IRTAD acronym has come to stand not only for the database, but also for the Traffic Safety Data and Analysis Group (usually referred to as IRTAD Group). The IRTAD Group is the International Transport Forum's permanent working group on road safety. It consists of a group of international road safety experts drawn from national road administrations, road safety research institutes, International organizations, automobile associations, insurance companies, car manufacturers and other road safety stakeholders. The IRTAD Group is a major forum for international road safety collaboration and exchange of best practices. Its focus is on improving road safety data as a basis for targeting interventions that are effective in reducing the number of road deaths and serious traffic injuries. The work of IRTAD, among that of others, has spawned the creation of road safety observatories for different world regions: the Ibero-American Road Safety Observatory Archived 2020-06-28 at the Wayback Machine (OISEVI), the African Road Safety Observatory Archived 2020-06-10 at the Wayback Machine, and the South-East Asian Road Safety Observatory. The ITF supports OISEVI through the Spanish-language IRTAD-LAC database and is actively involved in the implementation of the African and South East-Asian observatories. The genesis of the road safety observatory movement dates back to 2008, when the ITF, via IRTAD, began to facilitate twinning between countries striving to improve their road safety record and countries with high road safety performance. The initial twinning was between Jamaica and the United Kingdom. This work was supported by the World Bank, the Inter-American Development Bank (IADB) and the FIA Foundation. The twinning between Argentina and Spain in 2011 led to the creation of OISEVI. To this day, the ITF supports OISEVI through the Spanish-language IRTAD-LAC database. In 2006, the ITF set up Safer City Streets, a global traffic safety network for cities that replicates the successful IRTAD approach for urban road safety.

    Read more →
  • AsoSoft text corpus

    AsoSoft text corpus

    The AsoSoft text corpus is the first large-scale Kurdish text corpus, collected and processed by the AsoSoft research and development group. It contains 458,000 documents (188 million tokens) that are collected from sources such as websites, news agencies, books, and magazines. The corpus is partially tagged by topic, so it can be used for topic identification tasks. Also, it is applicable for extracting language model and computational lexicon information. Part of the corpus (75 million tokens) is available online for non-commercial use. The corpus uses the TEI format.

    Read more →
  • Key frame

    Key frame

    In animation and filmmaking, a key frame (or keyframe) is a drawing or shot that defines the starting and ending points of a smooth transition. These are called frames because their position in time is measured in frames on a strip of film or on a digital video editing timeline. A sequence of key frames defines which movement the viewer will see, whereas the position of the key frames on the film, video, or animation defines the timing of the movement. Because only two or three key frames over the span of a second do not create the illusion of movement, the remaining frames are filled with "inbetweens". == Use of key frames as a means to change parameters == In software packages that support animation, especially 3D graphics, there are many parameters that can be changed for any one object. One example of such an object is a light. In 3D graphics, lights function similarly to real-world lights. They cause illumination, cast shadows, and create specular highlights. Lights have many parameters, including light intensity, beam size, light color, and the texture cast by the light. Supposing that an animator wants the beam size to change smoothly from one value to another within a predefined period of time, that could be achieved by using key frames. At the start of the animation, a beam size value is set. Another value is set for the end of the animation. Thus, the software program automatically interpolates the two values, creating a smooth transition. == Video editing == In non-linear digital video editing, as well as in video compositing software, a key frame is a frame used to indicate the beginning or end of a change made to a parameter. For example, a key frame could be set to indicate the point at which audio will have faded up or down to a certain level. == Video compression == In video compression, a key frame, also known as an intra-frame, is a frame in which a complete image is stored in the data stream. In video compression, only changes that occur from one frame to the next are stored in the data stream, in order to greatly reduce the amount of information that must be stored. This technique capitalizes on the fact that most video sources (such as a typical movie) have only small changes in the image from one frame to the next. Whenever a drastic change to the image occurs, such as when switching from one camera shot to another or at a scene change, a key frame must be created. The entire image for the frame must be output when the visual difference between the two frames is so great that representing the new image incrementally from the previous frame would require more data than recreating the whole image. Because video compression only stores incremental changes between frames (except for key frames), it is not possible to fast-forward or rewind to any arbitrary spot in the video stream. That is because the data for a given frame only represents how that frame was different from the preceding one. For that reason, it is beneficial to include key frames at arbitrary intervals while encoding video. For example, a key frame may be output once for each 10 seconds of video, even though the video image does not change enough visually to warrant the automatic creation of the key frame. That would allow seeking within the video stream at a minimum of 10-second intervals. The downside is that the resulting video stream will be larger in disk size because many key frames are added when they are not necessary for the frame's visual representation. This drawback, however, does not produce significant compression loss when the bitrate is already set at a high value for better quality (as in the DVD MPEG-2 format).

    Read more →
  • Dark data

    Dark data

    Dark data is data which is acquired through various computer network operations but not used in any manner to derive insights or for decision making. The ability of an organisation to collect data can exceed the throughput at which it can analyse the data. In some cases the organisation may not even be aware that the data is being collected. IBM estimate that roughly 90 percent of data generated by sensors and analog-to-digital conversions never get used. In an industrial context, dark data can include information gathered by sensors and telematics. Organizations retain dark data for a multitude of reasons, and it is estimated that most companies are only analyzing 1% of their data. Often it is stored for regulatory compliance and record keeping. Some organizations believe that dark data could be useful to them in the future, once they have acquired better analytic and business intelligence technology to process the information. Because storage is inexpensive, storing data is easy. However, storing and securing the data usually entails greater expenses (or even risk) than the potential return profit. In academic discourse, the term dark data was essentially coined by Bryan P. Heidorn. He uses it to describe research data, especially from the long tail of science (the many, small research projects), which are not or no longer available for research because they disappear in a drawer without adequate data management. Without this, the data become dark, and further reasons for this are e.g. missing metadata annotation, missing data management plans and data curators. == Analysis == The term "dark data" very often refers to data that is not amenable to computer processing. For example, a company might have a great deal of data that exists only as scanned page-images. Even the bare text in such documents is not available without something like Optical character recognition, which can vary greatly in accuracy. Even with OCR, the significance of each part of the data is unavailable. An obvious examples is whether a capitalized word is a name or not, and if so, whether it represents a person, place, organization, or even a work of art. Bibliographic and other references, data within tables (that may be labeled quite adequately for humans, but not for processing), and countless assertions represented with the full complexity and ambiguity of human language. A lot of unused data is very valuable, and would be used if it could be; but is blocked because it is in formats that are difficult to process, categorise, identify, and analyse. Often the reason that business does not use their dark data is because of the amount of resources it would take and the difficulty of having that data analysed. In other words, the data is "dark" not because it is not used, but because it cannot (feasibly or affordably) be used, given its poor representation. There are many data representations that can make data much more accessible for automation. However, a great deal of information lacks any such identification of information items or relationships; and much more loses it during "downhill" conversion such as saving to page-oriented representations, printing, scanning, or faxing. The journey back "uphill" can be costly. According to Computer Weekly, 60% of organisations believe that their own business intelligence reporting capability is "inadequate" and 65% say that they have "somewhat disorganised content management approaches". == Relevance == Useful data may become dark data after it becomes irrelevant, as it is not processed fast enough. This is called "perishable insights" in "live flowing data". For example, if the geolocation of a customer is known to a business, the business can make offer based on the location, however if this data is not processed immediately, it may be irrelevant in the future. According to IBM, about 60 percent of data loses its value immediately. == Storage == According to the New York Times, 90% of energy used by data centres is wasted. If data was not stored, energy costs could be saved. Furthermore, there are costs associated with the underutilisation of information and thus missed opportunities. According to Datamation, "the storage environments of EMEA organizations consist of 54 percent dark data, 32 percent redundant, obsolete and trivial data and 14 percent business-critical data. By 2020, this can add up to $891 billion in storage and management costs that can otherwise be avoided." The continuous storage of dark data can put an organisation at risk, especially if this data is sensitive. In the case of a breach, this can result in serious repercussions. These can be financial, legal and can seriously hurt an organisation's reputation. For example, a breach of private records of customers could result in the stealing of sensitive information, which could result in identity theft. Another example could be the breach of the company's own sensitive information, for example relating to research and development. These risks can be mitigated by assessing and auditing whether this data is useful to the organisation, employing strong encryption and security and finally, if it is determined to be discarded, then it should be discarded in a way that it becomes unretrievable. == Future == It is generally considered that as more advanced computing systems for analysis of data are built, the higher the value of dark data will be. It has been noted that "data and analytics will be the foundation of the modern industrial revolution". Of course, this includes data that is currently considered "dark data" since there are not enough resources to process it. All this data that is being collected can be used in the future to bring maximum productivity and an ability for organisations to meet consumers' demand. Technology advancements are helping to leverage this dark data affordably. Furthermore, many organisations do not realise the value of dark data right now, for example in healthcare and education organisations deal with large amounts of data that could create a significant "potential to service students and patients in the manner in which the consumer and financial services pursue their target population".

    Read more →