AI Chatbot Emochi

AI Chatbot Emochi — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

• 

  Agent-assisted automation

  Agent-assisted automation is a type of call center technology that automates elements of what the call center agent 1) does with his/her desktop tools and/or 2) says to customers during the call using pre-recorded audio. It is a relatively new category of call center technology that shows promise in improving call center productivity and compliance. == Types of agent-assisted automation == === Pre-recorded audio === Pre-recorded audio (sometimes referred to as soundboard (computer program) or as soundboard technology) is another form of agent-assisted automation. The purpose of using pre-recorded messages is to increase the probability (and in some cases error-proof the process so) that the right information is provided to customers at the right time. The required disclosures are pre-recorded to ensure accuracy and understandability. By integrating the recordings with the customer relationship management software, the right combination of disclosures can be played based on the combination of goods and services the customer purchased. The integration with the customer relationship management software also ensures that the order cannot be submitted until the disclosures are played, essentially error-proofing (poka-yoke) the process of ensuring the customer gets all the required consumer protection information. Phone surveys are ideal applications of this technology. Whether surveying market preferences or political views, the pre-recorded audio with an agent listening allows the questions to be asked in the same way every time, uninfluenced by the agents' fatigue levels, accents, or their own views. === Fraud prevention === Fraud prevention is a specialized type of agent-assisted automation focused on reducing ID theft and credit card fraud. ID theft and credit card fraud are huge threats for call centers and their customers and few good solutions exist, but new agent-assisted automation solutions are producing promising results. The technology allows the agents to remain on the phone while the customers use their phone key pads to enter the information. The tones are masked and the information passes directly into the customer relationship management system or payment gateway in the case of credit card transactions. The automation essentially makes it impossible for call center agents and also call center personnel that might be monitoring the calls to steal the credit card number, social security number, or other personally identifiable information. === Outbound telemarketing === Another specialized application space of agent-assisted automation is in outbound telemarketing, which goes under numerous headings including outbound prospecting, cold calling, solicitation, fund-raising, etc. Turnover is high among agents engaged in this kind of work because the task is tedious and emotionally difficult. It is tedious because the agent spends the bulk of their day, not talking to qualified leads, but in getting wrong numbers and answering machines. == Benefits == Just as automation has benefited manufacturing by reducing the mental and physical effort required of workers while simultaneously improving throughput, quality, and safety, agent-assisted automation is improving call center results while reducing the tiring aspects of the job for agents. In some cases, the agent-assisted automation streamlines the process and allows calls to be handled more quickly. By eliminating cutting and pasting from one application to another, by auto-navigating applications, and by providing a single view of the customer, agent-assisted automation can reduce call handle time and increase agent productivity. Second, in theory, the more steps that can be automated and the more logic that can be built into the call flow (e.g., if the customer buys items 2 and 9, then disclosures a, c, and f are read by the pre-recorded audio), then companies may be able to reduce the amount of training that is required of the agents while at the same time ensuring more consistency and accuracy. However, no published studies have reported this result yet. But an even larger problem in call centers is between-agent variation in behavior and results. Agents differ in the amount of training and coaching they receive, they differ in the amount of experience they have, their jobs are repetitious and tiring, and the process and procedures the agents are supposed to follow constantly change. Moreover, there are significant individual differences between agents in their intelligence, personality, motivations, etc. which all affect performance. Despite the large amount of money call centers have spent over decades trying to reduce between-agent variation, the problem is still so prevalent that one large study of customer interactions with call centers found that a customer's experience was completely a function of the quality of the agent who happened to answer the phone. Therefore, the most significant benefit of agent-assisted automation may prove to be in how the automation error-proofs or poka-yoke the process and ensures that something that needs to be done or said happens every time. Properly implemented, the between-agent variation for whatever step of the process the automation is applied to may be able to be reduced to near zero. This is especially important in a collection agency whose processes and procedures are closely regulated by the Fair Debt Collection Practices Act.

  Read more →
• 

  Online Safety Amendment (Social Media Minimum Age) Act 2024

  The Online Safety Amendment (Social Media Minimum Age) Act 2024 is an Australian act of parliament that prohibits minors under the age of 16 from holding an account on certain social media platforms. It is an amendment to the Online Safety Act 2021 and was passed by the Parliament of Australia on 29 November 2024. It imposes monetary penalties on social media companies that fail to take reasonable steps to prevent minors under 16 that are located in Australia from having accounts on their services. The legislation allows the government to determine which social media platforms must ban age‑restricted users and proclaim a date for the commencement of the ban, with those provisions taking effect on 10 December 2025. Facebook, Instagram, Reddit, Snapchat, TikTok, Twitter, Threads, Twitch, Kick, and YouTube were age‑restricted on 10 December 2025, with the possibility that more platforms may be added. The act is being challenged in the High Court by the Digital Freedom Project. == Background == The ban on access to social media by young people by the federal government originated in November 2023, when shadow communications minister David Coleman introduced a private member's bill requiring the government to conduct a trial for age-verification technology on pornography and social media platforms. While the bill did not succeed, the Albanese government funded the trial in the 2024 Australian federal budget. In June 2024, opposition leader Peter Dutton pledged that a Coalition government would implement a ban on social media for under-16s within 100 days of taking office. The following month, prime minister Anthony Albanese announced the government would introduce legislation banning under-16s from social media. The Online Safety Amendment (Social Media Minimum Age) Bill 2024 was introduced into parliament by minister for communications Michelle Rowland on 21 November 2024, passing both houses on 28 November 2024. The ban on access to social media by young people by the federal government also gained momentum following an entreaty by the wife of the premier of South Australia, Peter Malinauskas, to her husband. She requested that he read The Anxious Generation by Jonathan Haidt and take action to address the impact of social media on the mental health of children. The couple have four young children, and, thinking of them, the premier thought that government should play a part in helping parents to regulate use of social media by their children at home. Malinauskas contacted former High Court chief justice Robert French, who agreed to look at the issue, and in September 2024 handed the premier a 267 page proposal, which he dubbed a "Swiss Army knife" rather than a machete, to adjust to social media's "changing landscape and its complexity". The leaders of other states and territories gave their support to Malinauskas's idea, and he took the French report to National Cabinet to collaborate with chief ministers, premiers, and the prime minister. Community support swelled after stories of parents who had lost their children to suicide after being bullied on social media were published. Albanese himself was moved by a personal letter received from Kelly O'Brien, whose 12-year-old daughter Charlotte had taken her own life due to bullying at school. An event took place at the sidelines of the United Nations General Assembly session in September 2025 at which a mother spoke of her daughter's suicide as "death by bullying ... enabled by social media". The speech won support from world leaders in Greece, Fiji, Tonga and the president of the European Commission Ursula von der Leyen. In early September 2024, South Australia proposed legislation similar to the federal law now in place. The state-based version was intended to ban users under the age of 14, unlike the federal law, which bans those under 16. The state-based law also proposed to require parental consent for 14 and 15‑year‑olds. Later in September, prime minister Anthony Albanese announced that his government intended to introduce legislation to set a minimum age requirement for social media. In November 2024, the federal government indicated their intention to engage the Age Check Certification Scheme following a tender process for an age assurance technology trial. The Albanese government's proposed ban was supported by the governments of every state and territory. Albanese described social media as a "scourge", and said "I want people to spend more time on the footy field or the netball court than they're spending on their phones", that family members are "worried sick about the safety of our kids online", and that social media "is having a negative impact on young people's mental health and on anxiety". Albanese's statements followed an earlier pledge by Liberal opposition leader Peter Dutton who was pushed by the early advocacy of shadow communications minister David Coleman to implement a ban on social media for under 16s within 100 days of being elected. The opposition organised an open letter signed by 140 experts who specialise in child welfare and technology. The opposition was concerned about the invasion of privacy that will occur with the introduction of identification-based age checks. An advocacy group for digital companies in Australia called the plans a "20th Century response to 21st Century challenges". A director of a mental health service voiced concerns, stating that "73% of young people across Australia who accessed mental health support did so through social media". == Implementation == Social media companies will receive a transition period of one year after the legislation is enacted to introduce reasonable controls preventing minors under the age of 16 from holding accounts on their services while physically located in Australia. Enforcement will involve fines of up to A$49.5 million for companies failing to take such steps, with no consequences for parents and children who violate the restrictions. There are no parental consent exceptions to the ban, and while the use of virtual private networks (VPNs) to access these services remains legal in Australia, the services are expected to try to stop under 16s from using VPNs to pretend to be outside Australia. The expectation is to make best-efforts to implement the ban on platforms including Facebook, Instagram, Reddit, Snapchat, TikTok, Twitter, Threads, Twitch, Kick and YouTube. Some social media companies are now obligated to become good enough at profiling Australian children under 16 to satisfy the Australian government they tried to implement the ban to avoid being fined. Consequently, social media companies said they will try to identify restricted users using various methods including behavioural inferencing. On 5 November 2025, it was announced that online gaming platform Roblox will not be banned, but Reddit and live-streaming platform Kick will be added to the list of platforms to be banned. A report by Age Check Certification Scheme, a UK company recruited by the government to consult on the technology used to implement the restrictions, was issued in June 2025, ahead of the December deadline to implement the ban. In June 2025, the preliminary report was released, which stated that "there are no significant technological barriers" to implementing the ban. In late July 2025, Google warned that it would sue the Australian government if YouTube was included in the ban. On 30 July, the government announced that it would extend its social media age limit to include YouTube, following advice from Grant. On 30 July 2025, the minister for communications, Anika Wells, published the Online Safety (Age-Restricted Social Media Platforms) Rules 2025, which specify exactly which types of social media platforms will be banned for certain users. On 31 August 2025, the full report was released, which stated that it would technically be possible to implement the ban; however, coordination among different services is required to successfully implement it. It also highlighted the benefits and flaws of different methods of age verification. On 16 September 2025, it was announced that the eSafety Commissioner will be able to take legal action against social media companies that have not pursued reasonable steps to bar users under the age of 16, and that fines can range up to A$49.5 million against these companies in court. On 19 November 2025, Meta announced that from 4 December their platforms (Instagram, Facebook, and Threads) would be removing users under the age of 16 ahead of the 10 December deadline. Users will be able to scan a face or provide an identity document to prove their age. On 21 November 2025, the eSafety Commissioner announced that the live-streaming platform Twitch will be included in the ban, but that Pinterest would not be. In December 2025, eSafety Commissioner Julie Inman Grant suggested efforts to block users include use by social media companies of various "signals" to identify children that are

  Read more →
• 

  Hybrid cryptosystem

  In cryptography, a hybrid cryptosystem is one which combines the convenience of a public-key cryptosystem with the efficiency of a symmetric-key cryptosystem. Public-key cryptosystems are convenient in that they do not require the sender and receiver to share a common secret in order to communicate securely. However, they often rely on complicated mathematical computations and are thus generally much more inefficient than comparable symmetric-key cryptosystems. In many applications, the high cost of encrypting long messages in a public-key cryptosystem can be prohibitive. This is addressed by hybrid systems by using a combination of both. A hybrid cryptosystem can be constructed using any two separate cryptosystems: a key encapsulation mechanism, which is a public-key cryptosystem a data encapsulation scheme, which is a symmetric-key cryptosystem The hybrid cryptosystem is itself a public-key system, whose public and private keys are the same as in the key encapsulation scheme. Note that for very long messages the bulk of the work in encryption/decryption is done by the more efficient symmetric-key scheme, while the inefficient public-key scheme is used only to encrypt/decrypt a short key value. == Implementations and standards == All practical implementations of public key cryptography today employ a hybrid system. Examples include the TLS protocol and the SSH protocol, that use a public-key mechanism for key exchange (such as Diffie-Hellman) and a symmetric-key mechanism for data encapsulation (such as AES). The OpenPGP file format and the PKCS#7 file format are other examples. Hybrid Public Key Encryption (HPKE, published as RFC 9180) is a modern standard for generic hybrid encryption. HPKE is used within multiple IETF protocols, including Messaging Layer Security (MLS), Oblivious DNS over HTTPS, Oblivious HTTP, Privacy Preserving Measurement, and TLS Encrypted Client Hello. Envelope encryption is an example of a usage of hybrid cryptosystems in cloud computing. In a cloud context, hybrid cryptosystems also enable centralized key management. == Example == To encrypt a message addressed to Alice in a hybrid cryptosystem, Bob does the following: Obtains Alice's public key. Generates a fresh symmetric key for the data encapsulation scheme. Encrypts the message under the data encapsulation scheme, using the symmetric key just generated. Encrypts the symmetric key under the key encapsulation scheme, using Alice's public key. Sends both of these ciphertexts to Alice. To decrypt this hybrid ciphertext, Alice does the following: Uses her private key to decrypt the symmetric key contained in the key encapsulation segment. Uses this symmetric key to decrypt the message contained in the data encapsulation segment. == Security == If both the key encapsulation and data encapsulation schemes in a hybrid cryptosystem are secure against adaptive chosen ciphertext attacks, then the hybrid scheme inherits that property as well. However, it is possible to construct a hybrid scheme secure against adaptive chosen ciphertext attacks even if the key encapsulation has a slightly weakened security definition (though the security of the data encapsulation must be slightly stronger). == Envelope encryption == Envelope encryption is term used for encrypting with a hybrid cryptosystem used by all major cloud service providers, often as part of a centralized key management system in cloud computing. Envelope encryption gives names to the keys used in hybrid encryption: Data Encryption Keys (abbreviated DEK, and used to encrypt data) and Key Encryption Keys (abbreviated KEK, and used to encrypt the DEKs). In a cloud environment, encryption with envelope encryption involves generating a DEK locally, encrypting one's data using the DEK, and then issuing a request to wrap (encrypt) the DEK with a KEK stored in a potentially more secure service. Then, this wrapped DEK and encrypted message constitute a ciphertext for the scheme. To decrypt a ciphertext, the wrapped DEK is unwrapped (decrypted) via a call to a service, and then the unwrapped DEK is used to decrypt the encrypted message. In addition to the normal advantages of a hybrid cryptosystem, using asymmetric encryption for the KEK in a cloud context provides easier key management and separation of roles, but can be slower. In cloud systems, such as Google Cloud Platform and Amazon Web Services, a key management system (KMS) can be available as a service. In some cases, the key management system will store keys in hardware security modules, which are hardware systems that protect keys with hardware features like intrusion resistance. This means that KEKs can also be more secure because they are stored on secure specialized hardware. Envelope encryption makes centralized key management easier because a centralized key management system only needs to store KEKs, which occupy less space, and requests to the KMS only involve sending wrapped and unwrapped DEKs, which use less bandwidth than transmitting entire messages. Since one KEK can be used to encrypt many DEKs, this also allows for less storage space to be used in the KMS. This also allows for centralized auditing and access control at one point of access.

  Read more →
• 

  Upworthy

  Upworthy is a media brand that focuses on positive storytelling. It was started in March 2012 by Eli Pariser, the former executive director of MoveOn, and Peter Koechley, the former managing editor of The Onion. One of Facebook's co-founders, Chris Hughes, was an early investor. At its peak between 2012 and 2014, it reached up to 100 million people a month. In 2017, the company was acquired by Good Worldwide. == History == Upworthy was launched in 2012 with a focus on aggregating positive content, which aligned with Facebook's algorithm. Originally, Upworthy curators searched the internet for existing content to feature on the site. Once selected as an option, curators brainstormed different headlines and shareable images for the content, and tested it with a small sample of Upworthy's visitors before sharing it on the site. The site popularized a clickbait style of two-phrase headlines. The company simplifies issues that are controversial by nature, which are presented from a politically liberal point of view and are heavily fact-checked for accuracy. In June 2013, an article in Fast Company called Upworthy "the fastest growing media site of all time". It had 8.7 million unique monthly visitors in the first six months, and in November 2013, had a high of 87 million unique visitors in a single month. In 2013, Facebook changed its algorithm, leading to a significant decline in readers from that platform. Upworthy fired one round of writers in 2015, and another in 2016, after an unionization effort by some of the staff. The union involved, the Writers Guild of America, East, has organized several online "viral" news publishers. In January 2017, Upworthy was acquired by media company GOOD Worldwide. The newsrooms of the two organizations would merge as part of the acquisition. About 20 staffers were laid off as part of the merger. In March 2020, Upworthy saw a 65% increase in Instagram followers and a 47% increased interest in positive content on-site page views as a result of increased interest in positive content during the COVID-19 pandemic. In January 2023, National Geographic Books bought Good People: Stories From the Best of Humanity from Upworthy, with a publication date of September 3, 2024. The book is described as "a heartwarming collection of first-person tales that will provide comfort and inspiration to anyone who could use a little dose of joy right now". It was created by two senior Upworthy team members, Gabriel Reilich and Lucia Knell, and features 101 stories from Upworthy's audience. The co-creators encouraged Upworthy followers to connect with the brand through questions on their posts, opening the door for organic and personal stories to be shared in the comment sections. The book debuted on The New York Times nonfiction bestseller list on September 22, 2024, and remained on the list for two weeks. The book is seen in the top 10 on Publishers Weekly Fall 2024 Adult Preview: Lifestyle and on The Washington Post's "5 feel-good books".

  Read more →
• 

  C-RAN

  C-RAN (Cloud-RAN), also referred to as Centralized-RAN, is an architecture for cellular networks. C-RAN is a centralized, cloud computing-based architecture for radio access networks that supports 2G, 3G, 4G, 5G and future wireless communication standards. Its name comes from the four 'C's in the main characteristics of C-RAN system, "Clean, Centralized processing, Collaborative radio, and a real-time Cloud Radio Access Network". == Background == Traditional cellular, or Radio Access Networks (RAN), consist of many stand-alone base stations (BTS). Each BTS covers a small area, whereas a group BTS provides coverage over a continuous area. Each BTS processes and transmits its own signal to and from the mobile terminal, and forwards the data payload to and from the mobile terminal and out to the core network via the backhaul. Each BTS has its own cooling, back haul transportation, backup battery, monitoring system, and so on. Because of limited spectral resources, network operators 'reuse' the frequency among different base stations, which can cause interference between neighboring cells. There are several limitations in the traditional cellular architecture. First, each BTS is costly to build and operate. Moore's law helps reduce the size and power of an electrical system, but the supporting facilities of the BTS are not improved quite as well. Second, when more BTS are added to a system to improve its capacity, interference among BTS is more severe as BTS are closer to each other and more of them are using the same frequency. Third, because users are mobile, the traffic of each BTS fluctuates (called 'tide effect'), and as a result, the average utilization rate of individual BTS is pretty low. However, these processing resources cannot be shared with other BTS. Therefore, all BTS are designed to handle the maximum traffic, not average traffic, resulting in a waste of processing resources and power at idle times. == Evolution of base station architecture == === All-in-one macro base station === In the 1G and 2G cellular networks, base stations had an all-in-one architecture. Analog, digital, and power functions were housed in a single cabinet as large as a refrigerator. Usually the base station cabinet was placed in a dedicated room along with all necessary supporting facilitates such as power, backup battery, air conditioning, environment surveillance, and backhaul transmission equipment. The RF signal is generated by the base station RF unit and propagates through pairs of RF cables up to the antennas on the top of a base station tower or other mounting points. This all-in-one architecture was mostly found in macro cell deployments. === Distributed base station === For 3G, a distributed base station architecture was introduced by Ericsson, Nokia, Huawei, and other leading telecom equipment vendors. In this architecture the radio function unit, also known as the remote radio head (RRH), is separated from the digital function unit, or baseband unit (BBU) by fiber. Digital baseband signals are carried over fiber, using the Open Base Station Architecture Initiative (OBSAI) or Common Public Radio Interface (CPRI) standard. The RRH can be installed on the top of tower close to the antenna, reducing the loss compared to the traditional base station where the RF signal has to travel through a long cable from the base station cabinet to the antenna at the top of the tower. The fiber link between RRH and BBU also allows more flexibility in network planning and deployment as they can be placed a few hundred meters or a few kilometers away. Most modern base stations now use this decoupled architecture. === C-RAN/Cloud-RAN === C-RAN may be viewed as an architectural evolution of the above distributed base station system. It takes advantage of many technological advances in wireless, optical and IT communications systems. For example, it uses the latest CPRI standard, low cost Coarse or Dense Wavelength Division Multiplexing (CWDM/ DWDM) technology, and mmWave to allow transmission of baseband signal over long distance thus achieving large scale centralised base station deployment. It applies recent Data Centre Network technology to allow a low cost, high reliability, low latency and high bandwidth interconnect network in the BBU pool. It utilizes open platforms and real-time virtualization technology rooted in cloud computing to achieve dynamic shared resource allocation and support multi-vendor, multi-technology environments. == Architecture overview == C-RAN architecture has the following characteristics that are distinct from other cellular architectures: Large scale centralized deployment: Allows many RRHs to connect to a centralized BBU pool. The maximum distance can be 20km in fiber link for 4G (LTE/LTE-A) systems, and even longer distances (40~80km) for 3G (WCDMA/TD-SCDMA) and 2G (GSM/CDMA) systems. Native support to Collaborative Radio technologies: Any BBU can talk with any other BBU within the BBU pool with very high bandwidth (10 Gbit/s and above) and low latency (10 μs level). This is enabled by the interconnection of BBUs in the pool. This is one major difference from BBU Hotelling, or base station Hotelling; in the latter case, the BBUs of different base stations are simply stacked together and have no direct link between them to allow physical layer co-ordination. Real-time virtualization capability based on open platform: This is different from traditional base stations built on proprietary hardware, where the software and hardware are close-sourced and provided by single vendors. In contrast, a C-RAN BBU pool is built on open hardware, like x86/ARM CPU based servers, and interface cards that handle fiber links to RRHs and inter-connections in the pool. Real-time virtualization ensures that resources in the pool can be allocated dynamically to base station software stacks, say 4G/3G/2G function modules from different vendors, according to network load. However, to satisfy the strict timing requirements of wireless communication systems, the real-time performance for C-RAN is at the level of tens of microseconds, which is two orders of magnitude better than the millisecond level 'real-time' performance usually seen in Cloud Computing environments. == Similar architecture and systems == KT, a telecom operator in the Republic of Korea, introduced a Cloud Computing Center (CCC) system in their 3G (WCDMA/HSPA) and 4G (LTE/LTE-A) network in 2011 and 2012. The concept of CCC is basically the same as C-RAN. SK Telecom has also deployed Smart Cloud Access Network (SCAN) and Advanced-SCAN in their 4G (LTE/LTE-A) network in Korea no later than 2012. In 2014, Airvana (now CommScope) introduced OneCell, a C-RAN-based small cell system designed for enterprises and public spaces. == Competing architectures in cellular network evolution == === All-in-one BTS === One major alternative solution that is addressing similar challenges of RAN, is the small size, all-in-one outdoor BTS. Thanks to the achievements in the semiconductor industry, all the functionality of a BTS, including RF, baseband processing, MAC processing and package level processing, can now be implemented in a volume of <50 liters. This makes the system small and weatherproof, reduces the difficulty of BTS site choice and construction, eliminates the air conditioning requirement, and thus reduces operational costs. However, because each BTS is still working on its own, it cannot readily make use of the collaboration algorithms to reduce the interference between neighboring BTSs. It is also relatively hard to upgrade or repair because the all-in-one BTS units are usually mounted near the antenna. More processing units in less-protected environments also implies a higher failure rate compared to C-RAN, which only has the RRU deployed outdoors. The advantage of Cloud RAN lies in its ability to implement LTE-Advanced features such as Coordinated MultiPoint (CoMP) with very low latency between multiple radio heads. However, the economic benefit of improvements such as CoMP can be negated by the higher backhaul costs for some operators. === Small cell === The main competition between small cell and C-RAN occurs in two deployment scenarios: outdoor hotspot coverage and indoor coverage. == Academic research and publications == As one of the promising evolution paths for future cellular network architecture, C-RAN has attracted high academic research interest. Meanwhile, because the native support of cooperative radio capability built into the C-RAN architecture, it also enables many advanced algorithms that were hard to implement in cellular networks, including Cooperative Multi-Point Transmission/Receiving, Network Coding, etc. In October 2011, Wireless World Research Forum 27 was hosted in Germany, when China Mobile was invited to give a C-RAN presentation. In August 2012, IEEE C-RAN 2012 workshop was hosted in Kunming, China. CRC Press published a book, "Green Communications: Theore

  Read more →
• 

  Telenet

  Telenet was an American commercial packet-switched network which went into service in August 16, 1975. It was the first FCC-licensed public data network in the United States. Various commercial and government interests paid monthly fees for dedicated lines connecting their computers and local networks to this backbone network. Free public dialup access to Telenet, for those who wished to access these systems, was provided in hundreds of cities throughout the United States. == History == After establishing that commercial operation of "value added carriers" was legal in the U.S., Bolt Beranek and Newman (BBN), who were the private contractors for constructing packet switching nodes (Interface Message Processor) for the ARPANET, set out to create a private sector version. The original founding company, Telenet Inc., was established by BBN. In January 1975, Telenet Communications Corporation announced that they had acquired the necessary venture capital after a two-year quest. Initially, Bob Kahn was the first President of Telenet; he then moved to ARPA as Larry Roberts left to become President of the company. Barry Wessler also joined from ARPA. On August 16 of the same year they began operating the first public data network. The network offered an email service called Telemail. Telenet had its first offices in downtown Washington, D.C., then moved to McLean, Virginia. It was acquired by GTE in 1979, and then moved to offices in Reston, Virginia. It was later acquired by Sprint and called "Sprintnet". Sprint migrated customers from Telenet to the modern-day Sprintlink IP network, one of many networks composing today's Internet. == Coverage == Originally, the public network had switching nodes in seven US cities: Washington, D.C. (network operations center as well as switching) Boston, Massachusetts New York, New York Chicago, Illinois Dallas, Texas San Francisco, California Los Angeles, California The switching nodes were fed by Telenet Access Controller (TAC) terminal concentrators both colocated and remote from the switches. By 1980, there were over 1000 switches in the public network. At that time, the next largest network using Telenet switches was that of Southern Bell, which had approximately 250 switches. In 1977, Telenet added a London node and a Network Control Centre in a London building of Britain's Post Office Telecommunications. == Internal network technology == Telenet initially used a proprietary virtual connection host interface. The network used statically defined hop-by-hop routing, using Prime commercial minicomputers as switches, but then migrated to a purpose-built multiprocessing switch based on 6502 microprocessors. Among the innovations of this second-generation switch was a patented arbitrated bus interface that created a switched fabric among the microprocessors. By contrast, a typical microprocessor-based system of the time used a bus; switched fabrics did not become common until about twenty years later, with the advent of PCI Express and HyperTransport. Most interswitch lines ran at 56 kbit/s, with a few, such as New York-Washington, at T1 (i.e., 1.544 Mbit/s). Originally, the switching tables could not be altered separately from the main executable code, and topology updates had to be made by deliberately crashing the switch code and forcing a reboot from the network management center. Improvements in the software allowed new tables to be loaded, but the network never used dynamic routing protocols. Multiple static routes, on a switch-by-switch basis, could be defined for fault tolerance. Network management functions continued to run on Prime minicomputers. Roberts and Barry Wessler joined the international effort to standardize the a protocol for packet-switched data communication based on virtual circuits shortly before it was finalized. The CCITT proposal for X.25 was being prepared by Rémi Després and other international experts. A few minor changes, which complemented the proposed specification, were accommodated to enable Telenet to join the agreement. Telenet adopted X.25 shortly after the protocol was published in March 1976. Its X.25 host interface was the first in the industry. The main internal protocol was a proprietary variant on X.75; Telenet also ran standard X.75 gateways to other packet switching networks. == Accessing the network == === Basic asynchronous access === Users could use modems on the Public Switched Telephone Network to dial TAC ports, calling either from "dumb" terminals or from computers emulating such terminals. Organizations with a large number of local terminals could install a TAC on their own site, which used a dedicated line, at up to 56 kbit/s, to connect to a switch at the nearest Telenet location. Dialup modems supported had a maximum speed of 1200 bit/s, and later 4800 bit/s. For example, a customer in NYC could dial into the local number, then type in a command similar to: which would connect (that "c") them to a computer system designated as number "555" located in the same vicinity as the standard telephone "area code" 301. One significant customer was an early (what would now be called) internet service provider The Source which had their equipment in Mclean, Va. Telenet offered a much lower nighttime rate when there were few corporate customers, and this let The Source set up a modestly priced offering to tens of thousands of customers. Another prominent customer in the 1980s was Quantum Link (now AOL). === Other access protocols === Telenet supported remote concentrators for IBM 3270 family intelligent terminals, which communicated, via X.25 to Telenet-written software that ran in IBM 370x series front-end processors. Telenet also supported Block Mode Terminal Interfaces (BMTI) for IBM Remote Job Entry terminals supporting the 2780/3780 and HASP Bisync protocols. === PC Pursuit === In the late 1980s, Telenet offered a service called PC Pursuit. For a flat monthly fee, customers could dial into the Telenet network in one city, then dial out on the modems in another city to access bulletin board systems and other services. PC Pursuit was popular among computer hobbyists because it sidestepped long-distance charges. In this sense, PC Pursuit was similar to the Internet, allowing any user to call any system as if it were local. On connection to the network, the user entered a 5-letter code for the target city they wished to call. This consisted of a 2-letter state code and a 3-letter acronym for the city. For instance, to call a system in Cleveland, Ohio, the user would enter the code OHCLV, for "OHio", "CLeVeland". Once connected, the user could dial out to any local number, and the system simulated a direct connection between the two endpoints.

  Read more →
• 

  Computer network engineering

  Computer network engineering is a technology discipline within engineering that deals with the design, implementation, and management of computer networks. These systems contain both physical components, such as routers, switches, cables, and some logical elements, such as protocols and network services. Computer network engineers attempt to ensure that the data is transmitted efficiently, securely, and reliably over both local area networks (LANs) and wide area networks (WANs), as well as across the Internet. Computer networks often play a large role in modern industries ranging from telecommunications to cloud computing, enabling processes such as email and file sharing, as well as complex real-time services like video conferencing and online gaming. == Background == The evolution of network engineering is marked by significant milestones that have greatly impacted communication methods. These milestones particularly highlight the progress made in developing communication protocols that are vital to contemporary networking. This discipline originated in the 1960s with projects like ARPANET, which initiated important advancements in reliable data transmission. The advent of protocols such as TCP/IP revolutionized networking by enabling interoperability among various systems, which, in turn, fueled the rapid growth of the Internet. Key developments include the standardization of protocols and the shift towards increasingly complex layered architectures. These advancements have profoundly changed the way devices interact across global networks. == Network infrastructure design == The foundation of computer network engineering lies in the design of the network infrastructure. This involves planning both the physical layout of the network and its logical topology to ensure optimal data flow, reliability, and scalability. === Physical infrastructure === The physical infrastructure consists of the hardware used to transmit data, which is represented by the first layer of the OSI model. ==== Cabling ==== Copper cables such as ethernet over twisted pair are commonly used for short-distance connections, especially in local area networks (LANs), while fiber optic cables are favored for long-distance communication due to their high-speed transmission capabilities and lower susceptibility to interference. Fiber optics play a significant role in the backbone of large-scale networks, such as those used in data centers and internet service provider (ISP) infrastructures. ==== Wireless networks ==== In addition to wired connections, wireless networks have become a common component of physical infrastructure. These networks facilitate communication between devices without the need for physical cables, providing flexibility and mobility. Wireless technologies use a range of transmission methods, including radio frequency (RF) waves, infrared signals, and laser-based communication, allowing devices to connect to the network. Wi-Fi based on IEEE 802.11 standards is the most widely used wireless technology in local area networks and relies on RF waves to transmit data between devices and access points. Wireless networks operate across various frequency bands, including 2.4 GHz and 5 GHz, each offering unique ranges and data rates; the 2.4 GHz band provides broader coverage, while the 5 GHz band supports faster data rates with reduced interference, ideal for densely populated environments. Beyond Wi-Fi, other wireless transmission methods, such as infrared and laser-based communication, are used in specific contexts, like short-range, line-of-sight links or secure point-to-point communication. In mobile networks, cellular technologies like 3G, 4G, and 5G enable wide-area wireless connectivity. 3G introduced faster data rates for mobile browsing, while 4G significantly improved speed and capacity, supporting advanced applications like video streaming. The latest evolution, 5G, operates across a range of frequencies, including millimeter-wave bands, and provides high data rates, low latency, and support for more device connectivity, useful for applications like the Internet of Things (IoT) and autonomous systems. Together, these wireless technologies allow networks to meet a variety of connectivity needs across local and wide areas. ==== Network devices ==== Routers and switches help direct data traffic and assist in maintaining network security; network engineers configure these devices to optimize traffic flow and prevent network congestion. In wireless networks, wireless access points (WAP) allow devices to connect to the network. To expand coverage, multiple access points can be placed to create a wireless infrastructure. Beyond Wi-Fi, cellular network components like base stations and repeaters support connectivity in wide-area networks, while network controllers and firewalls manage traffic and enforce security policies. Together, these devices enable a secure, flexible, and scalable network architecture suitable for both local and wide-area coverage. === Logical topology === Beyond the physical infrastructure, a network must be organized logically, which defines how data is routed between devices. Various topologies, such as star, mesh, and hierarchical designs, are employed depending on the network’s requirements. In a star topology, for example, all devices are connected to a central hub that directs traffic. This configuration is relatively easy to manage and troubleshoot but can create a single point of failure. In contrast, a mesh topology, where each device is interconnected with several others, offers high redundancy and reliability but requires a more complex design and larger hardware investment. Large networks, especially those in enterprises, often employ a hierarchical model, dividing the network into core, distribution, and access layers to enhance scalability and performance. == Network protocols and communication standards == Communication protocols dictate how data in a network is transmitted, routed, and delivered. Depending on the goals of the specific network, protocols are selected to ensure that the network functions efficiently and securely. The Transmission Control Protocol/Internet Protocol (TCP/IP) suite is fundamental to modern computer networks, including the Internet. It defines how data is divided into packets, addressed, routed, and reassembled. The Internet Protocol (IP) is critical for routing packets between different networks. In addition to traditional protocols, advanced protocols such as Multiprotocol Label Switching (MPLS) and Segment Routing (SR) enhance traffic management and routing efficiency. For intra-domain routing, protocols like Open Shortest Path First (OSPF) and Enhanced Interior Gateway Routing Protocol (EIGRP) provide dynamic routing capabilities. On the local area network (LAN) level, protocols like Virtual Extensible LAN (VXLAN) and Network Virtualization using Generic Routing Encapsulation (NVGRE) facilitate the creation of virtual networks. Furthermore, Internet Protocol Security (IPsec) and Transport Layer Security (TLS) secure communication channels, ensuring data integrity and confidentiality. For real-time applications, protocols such as Real-time Transport Protocol (RTP) and WebRTC provide low-latency communication, making them suitable for video conferencing and streaming services. Additionally, protocols like QUIC enhance web performance and security by establishing secure connections with reduced latency. == Network security == As networks have become essential for business operations and personal communication, the demand for robust security measures has increased. Network security is a critical component of computer network engineering, concentrating on the protection of networks against unauthorized access, data breaches, and various cyber threats. Engineers are responsible for designing and implementing security measures that ensure the integrity and confidentiality of data transmitted across networks. Firewalls serve as barriers between trusted internal networks and external environments, such as the Internet. Network engineers configure firewalls, including next-generation firewalls (NGFW), which incorporate advanced features such as deep packet inspection and application awareness, thereby enabling more refined control over network traffic and protection against sophisticated attacks. In addition to firewalls, engineers use encryption protocols, including Internet Protocol Security (IPsec) and Transport Layer Security (TLS), to secure data in transit. These protocols provide a means of safeguarding sensitive information from interception and tampering. For secure remote access, Virtual Private Networks (VPNs) are deployed, using technologies to create encrypted tunnels for data transmission over public networks. These VPNs are often used for maintaining security when remote users access corporate networks but are also used ion other settings. To enhance threat detection and r

  Read more →
• 

  Blocknots

  Blocknots were random sequences of numbers contained in a book and organized by numbered rows and columns and were used as additives in the reciphering of Soviet Union codes, during World War II. The Blocknot consisted of a booklet of fifty sheets of 5-figure random additive, 100 additive groups to a sheet. No sheet was used more than once, thus the blocknots were in effect a form of one-time pad. The Soviet Unions highest grade ciphers that were used in the East, were the 5-figure codebook enciphered with the Blocknot book, and were generally considered unbreakable. == Technical Description == Blocknots were distributed centrally from an office in Moscow. Every Blocknot contained 5-figure groups in a number of sheets, for the enciphering of 5-figure messages. The encipherment was effected by applying additives taken from the pad, of which 50-100 5-figure groups appeared. Each pad had a 5-figure number and each sheet had a 2-figure number running consecutively. There were 5 different types of Blocknots, in two different categories The Individual in which each table of random numbers was used only once. The General in which each page of the Blocknot was valid for one day. The security of the additive sequence rested on the choice of different starting points for each message. In 5-figure messages, the blocknot was one of the first 10 Groups in the message. Its position changed at long intervals, but was always easy to re-identify. The Russians differentiated between three types of blocks: The 3-block, DRIERBLOCK. I-block for Individual Block: 50 pages, additive read off in one direction only. The messages could be used and read only between 2 wireless telegraphy stations on one net. The 6-block, SECHSERBLOCK. Z-block for Circular Block: 30 pages, additive read off in either direction. The messages could be used and read, between all W/T stations in a net. The 2-block, ZWEIERBLOCK. OS-block. Used only in traffic from lower to higher formations. Two other types were used, in lower echelons. Notblock: Used in an emergency. Blocknot used for passing on traffic. The distribution of Blocknots was carried out centrally from Moscow to Army Groups then to Armies. The Army was responsible for their distribution throughout the lower levels of the army down to company level. Independent units took their cipher material with them. Occasionally the same blocknot was distributed to two units on different parts of the front, which enabled Depth to be established. Records of all Blocknots used were kept in Berlin and when a repeat was noticed a BLOCKNOT ANGEBOT message was sent out to all German Signals units, to indicate that it may have been possible to break the code using it. There was no certainty in this. A cryptanalyst with the General der Nachrichtenaufklärung stated while being interrogated by TICOM: It seems that depths of up to 8 were established at the beginning of the Russian Campaign but that no 5-figure code was broken after May 1943 German cryptanalysts who were prisoners of war stated under interrogation, that each of the figures 0 to 9 were placed en clair usually within the first ten groups of the text or sometimes at the end. One indicator was the Blocknot number and the consisted of two random figures, the figure representing the type, and the remaining two, the page of the Blocknot being used. In long messages, 000000 was placed in the message when the end of a page had been reached. == Chi number == The Chi-number was the serial numbering of all 5-figure messages passing through the hands of the Cipher Officer, starting on the first of January and ending on thirty-first December of the current year. It always appeared as the last group in an intercepted message, e.g. 00001 on the 1st January, or when the unit was newly set up. The progression of Chi-numbers was carefully observed and recorded in the form of a graph. A Russian corps had about 10 5-figure messages per day, and Army about 20-30 and a Front about 60–100. After only a relatively short time, the individual curves separated sharply and the type of formation could be recognized by the height of the Chi-number alone. == Monitoring == Blocknots were tracked in a card index, that was maintained by the Signal Intelligence Evaluation Centre (NAAS). The NAAS functionality included evaluation and traffic analysis, cryptanalysis, collation and dissemination of intelligence. The card index, which was one amongst several Card Indexes. A careful recording and study of blocks provided the positive clues in the identification and tracking of formations using 5-figure ciphers. The index was subdivided into two files: Search card index, contained all blocknots and chi-numbers whether or not they were known. Unit card index, contained only known Block and Chi-numbers. Inspector Berger, who was the chief cryptanalyst of NAAS 1 stated that the two files formed: The most important and surest instruments for identifying Russian radio nets, known to him. The Blocknots were also used in the Stationary Intercept Company (Feste), the military unit that were designed to work at a lower level to the NAAS, at the Army level and were semi-motorized, and closer to the front. The Feste used the Blocknot value along with several other parameters to build a network diagram. The network diagram was studied extensively, as part of a 6-stage process, that involved several departments within the Feste. The outcome was a metric which determined the most interesting circuit for traffic monitoring, and least interesting, where monitoring of traffic should cease. == Analysis == Johannes Marquart was a mathematician and cryptanalyst who initially worked for Inspectorate 7/VI and later led Referat Ia of Group IV of the General der Nachrichtenaufklärung. Marquart was assigned the study of the Soviet Union Blocknot traffic. Marquart and his unit conducted extensive research in an attempt to discover the method by which they were produced. All the counts which they made, however, failed to reveal any non-random characteristics in the design of the tables, and while they thought the Blocknots must have been generated by machine, they were never able to draw any concrete deductions as a result of their research. == Example == The Soviet 3rd Guard Tank Army transmits a 5-figure message with the Blocknot of 37581 (one of the first 10 groups in the message). On the same day the Block 37582 was used by the same formation. The next day 37583 appeared. Thereafter, for a period, the Army was not heard by German Wireless telegraphy intercept operators, as it was maintaining wireless silence. After a few days, an unidentified net with the Blocknot 37588 is picked up. This message net is claimed, because of the proximity of the blocks (88/83) to be the 3rd Guard Tank Army. The missing Blocknots 84-87 were presumably used in telegraphic, telephonic or courier communications. The Chi number provides confirmation of the first assumption, based on proximity of blocknots in most cases.

  Read more →
• 

  Subpixel rendering

  Subpixel rendering is a method used to increase the effective resolution of a color display device. It utilizes the composition of each pixel, which consists of three subpixels of which are red, green, and blue that can each be individually addressable on the display matrix. Subpixel rendering is primarily used for text rendering on standard DPI displays. Despite the inherent color anomalies, it can also be used to render general graphics. == History == The origin of subpixel rendering as used today remains controversial. Apple Inc., IBM, and Microsoft patented various implementations that differed in technical details owing to the different purposes for which their technologies were intended. Microsoft held several patents in the United States for subpixel rendering technology used in text rendering on RGB Stripe layouts. The patents 6,219,025; 6,239,783; 6,307,566; 6,225,973; 6,243,070; 6,393,145; 6,421,054; 6,282,327; and 6,624,828 were filed between October 7, 1998, and October 7, 1999, and expired on July 30, 2019. Analysis of the patent by FreeType indicates that the patent does not cover the idea of subpixel rendering, but rather the actual filter used as a last step to balance the color. Microsoft's patent describes the smallest possible filter that distributes each subpixel value equally among the R, G, and B pixels. Any other filter will either be blurrier or will introduce color artifacts. Apple was able to use it in Mac OS X due to a patent cross-licensing agreement. == Characteristics == A single pixel on a color display is made of several subpixels, typically three arranged left-to-right as red, green, and blue (RGB). The components are readily visible with a small magnifying glass, such as a loupe. These pixel components appear as a single color to the human eye because of blurring by optics and spatial integration by nerve cells in the eye. However, the eye is much more sensitive to the location. Therefore, turning on the G and B of one pixel and the R of the next pixel to the right will produce a white dot, but it will appear to be 1/3 of a pixel to the right of the white dot that would be seen from the RGB of only the first pixel. Subpixel rendering leverages this to provide three times the horizontal resolution of the rendered image. However, it has to blur this image to produce the correct color by ensuring the same amount of red, green, and blue are turned on as when no subpixel rendering is being done. Subpixel rendering does not necessitate the use of antialiasing. It gives a smoother result regardless of whether antialiasing is used or not since it artificially increases the resolution. However, it introduces color aliasing since subpixels are colored. Subsequent filtering applied to remove the color artifacts is a form of antialiasing, although its purpose is not smoothing jagged shapes as in conventional antialiasing. Subpixel rendering requires the software to know the layout of the subpixels. The most common reason it is wrong is monitors that can be rotated 90 (or 180) degrees, though monitors are manufactured with other arrangements of the subpixels, such as BGR or in triangles, or with 4 colors like RGBW squares. On any such display the result of incorrect subpixel rendering will be worse than if no subpixel rendering was done at all (it will not produce color artifacts, but it will produce noisy edges). == Implementations == === Apple II === Steve Gibson has claimed that the Apple II, introduced in 1977, supports an early form of subpixel rendering in its high-resolution (280×192) graphics mode. The Wozniak patent only used 2 "sub-pixels". The bytes that comprise the Apple II high-resolution screen buffer contain seven visible bits (each corresponding directly to a pixel) and a flag bit used to select between purple/green or blue/orange color sets. Each pixel, since it is represented by a single bit, is either on or off; there are no bits within the pixel itself for specifying color or brightness. Color is instead created as an artifact of the NTSC color encoding scheme, determined by horizontal position: pixels with even horizontal coordinates are always purple (or blue, if the flag bit is set), and odd pixels are always green (or orange). Two lit pixels next to each other are always white, regardless of whether the pair is even/odd or odd/even, and irrespective of the value of the flag bit. This is an approximation, but it is what most programmers of the time would have in mind while working with the Apple's high-resolution mode. Gibson's example claims that because two adjacent bits form a white block, there are, in fact, two bits per pixel: one that activates the pixel's purple left half and the other that activates its green right half. If the programmer instead activates the green right half of a pixel and the purple left half of the next pixel, the result is a white block 1/2 pixel to the right, which is indeed an instance of subpixel rendering. However, it is not clear whether any programmers of the Apple II have considered the pairs of bits as pixels—instead calling each bit a pixel. The flag bit in each byte affects color by shifting pixels half a pixel-width to the right. This half-pixel shift was exploited by some graphics software, such as HRCG (High-Resolution Character Generator), an Apple utility that displayed text using the high-resolution graphics mode, to smooth diagonals. === ClearType === Microsoft announced its subpixel rendering technology, called ClearType, at COMDEX in 1998. Microsoft published a paper in May 2000, Displaced Filtering for Patterned Displays, describing the filtering behind ClearType. It was then made available in Windows XP. Still, it was not activated by default until Windows Vista, while Windows XP OEMs could and did change the default setting. === FreeType === FreeType, the library used by most current software on the X Window System, contains two open source implementations. The original implementation uses the ClearType antialiasing filters and carries the following notice: "The colour filtering algorithm of Microsoft's ClearType technology for subpixel rendering is covered by patents; for this reason, the corresponding code in FreeType is disabled by default. Note that subpixel rendering per se is prior art; using a different colour filter thus easily circumvents Microsoft's patent claims." FreeType offers a variety of color filters. Since version 2.6.2, the default filter is light, a filter that is both normalized (value sums up to 1) and color-balanced (eliminate color fringes at the cost of resolution). Since version 2.8.1, a second implementation exists, called Harmony, that "offers high quality LCD-optimized output without resorting to ClearType techniques of resolution tripling and filtering". This is the method enabled by default. When using this method, "each color channel is generated separately after shifting the glyph outline, capitalizing on the fact that the color grids on LCD panels are shifted by a third of a pixel. This output is indistinguishable from ClearType with a light 3-tap filter." Since the Harmony method does not require additional filtering, it is not covered by the ClearType patents. === CoolType === Adobe created their own subpixel renderer called CoolType, allowing them to display documents the same way across various operating systems: Windows, MacOS, Linux etc. When it was launched around the year 2001, CoolType supported a wider range of fonts than Microsoft's ClearType, which at the time was limited to TrueType fonts. In contrast, Adobe's CoolType also supported PostScript fonts (and their OpenType equivalents). === macOS === Mac OS X (later OS X, now macOS) also used subpixel rendering, as part of Quartz 2D. However, it was removed after the introduction of Retina displays. Unlike Microsoft's implementation, which favors a tight fit to the grid (font hinting) to maximize legibility, Apple's implementation prioritizes the shape of the glyphs as set out by their designer.

  Read more →
• 

  Caste census

  Caste census is a proposed census to be conducted in India by the Central Government of India. The proposed census was decided under the leadership of Prime Minister Narendra Modi by the cabinet committee of political affairs (CCPA) on 30 April 2025. It has been decided that a caste enumeration should be included with the forthcoming census. The exact time has not been declared yet. It is unclear that when the next census will be held. The decision of the cabinet was announced by the Central Railway Minister Ashwini Vaishnaw. It has been seen as a step that would help in drafting "equitable and targeted" policies by the present Central Government of India led by the Bhartiya Janta Party in India. The Central Home Minister Amit Shah has described the decision as a "historic decision". He has also described that the historic decision as “committed to social justice”. The leader of opposition Rahul Gandhi has welcomed the decision. He said "We have shown we can pressure govt" He has demanded a clear timeline for its completion. He has called it "The first step towards deep social reform". == Description == The caste census is a systematic recording of individuals’ caste identities during the nationwide census in the country. The Central minister Ashwini Vaishnaw expressed his view on the proposed census and said that it would "strengthen the social and economic structure of our society while the nation continues to progress”. The Caste census will happen for the first time in 100 years by the Central Government of India. It will be the part of the upcoming census in India. == History == According to Peabody, the first systematic caste-wise enumeration of households in the Indian subcontinent was conducted between 1658 and 1664 across seven districts of the then Marwar Kingdom, including Jodhpur city which was its capital. It was conducted by the then home minister Munhata Nainsi of the kingdom for the purpose of tax documentation. It was not to for classification of society or creation of social hierarchies but solving a tax related problem. During the period of the British rule in India, caste census was included in the decadal censuses to categorise the population by caste, religion and occupation. In 1871–72, the first detailed caste census was conducted by the government of British Raj in India. It was practiced between the period 1881 to 1931. The last caste census was conducted in the year 1931 in which 4,147 castes were recorded. The largest population in the whole of British India (including Pakistan and Bangladesh) was of Brahmins. The population of Brahmins was recorded more than 1.5 crores. After Brahmin community, the second place was of Jatav (Chamar)community. The population of Jatav was a little more than 1.23 crores. On the third place were Rajputs. The population of Rajputs was 81 lakhs. The Rajput caste was followed by the Kunbi caste of Maharashtra. The population of Kunbi caste was 64 lakhs and 34 thousands. The Kunbi caste was followed by Yadav (Ahir) caste. The population of Yadav (Ahir) community was 56 lakhs and 82 thousands. The Yadav (Ahir) caste was followed by Teli community. The population of Teli community was 42 lakhs and 58 thousands. The Teli community was followed by Gwala community. The population of the Gwala community was 40 lakhs. After the independence of India, the caste enumeration was stopped by the newly independent Government of India led by the prime minister Pandit Jawahar Lal Nehru in 1951. The caste enumeration was stopped to avoid reinforcing social divisions in the Indian society. But, there was an exception made for the enumeration of the Scheduled Castes (SCs) and Scheduled Tribes (STs) in the decadal censuses. Therefore, the enumeration of the Scheduled Castes and the Scheduled Tribes is being conducted in every census since 1951. In 1961, the Government of India permitted states for conducting their own surveys to compile OBC lists, but national caste census was not conducted.

  Read more →
• 

  Data stream management system

  A data stream management system (DSMS) is a computer software system to manage continuous data streams. It is similar to a database management system (DBMS), which is, however, designed for static data in conventional databases. A DBMS also offers a flexible query processing so that the information needed can be expressed using queries. However, in contrast to a DBMS, a DSMS executes a continuous query that is not only performed once, but is permanently installed. Therefore, the query is continuously executed until it is explicitly uninstalled. Since most DSMS are data-driven, a continuous query produces new results as long as new data arrive at the system. This basic concept is similar to complex event processing so that both technologies are partially coalescing. == Functional principle == One important feature of a DSMS is the possibility to handle potentially infinite and rapidly changing data streams by offering flexible processing at the same time, although there are only limited resources such as main memory. The following table provides various principles of DSMS and compares them to traditional DBMS. == Processing and streaming models == One of the biggest challenges for a DSMS is to handle potentially infinite data streams using a fixed amount of memory and no random access to the data. There are different approaches to limit the amount of data in one pass, which can be divided into two classes. For the one hand, there are compression techniques that try to summarize the data and for the other hand there are window techniques that try to portion the data into (finite) parts. === Synopses === The idea behind compression techniques is to maintain only a synopsis of the data, but not all (raw) data points of the data stream. The algorithms range from selecting random data points called sampling to summarization using histograms, wavelets or sketching. One simple example of a compression is the continuous calculation of an average. Instead of memorizing each data point, the synopsis only holds the sum and the number of items. The average can be calculated by dividing the sum by the number. However, it should be mentioned that synopses cannot reflect the data accurately. Thus, a processing that is based on synopses may produce inaccurate results. === Windows === Instead of using synopses to compress the characteristics of the whole data streams, window techniques only look on a portion of the data. This approach is motivated by the idea that only the most recent data are relevant. Therefore, a window continuously cuts out a part of the data stream, e.g. the last ten data stream elements, and only considers these elements during the processing. There are different kinds of such windows like sliding windows that are similar to FIFO lists or tumbling windows that cut out disjoint parts. Furthermore, the windows can also be differentiated into element-based windows, e.g., to consider the last ten elements, or time-based windows, e.g., to consider the last ten seconds of data. There are also different approaches to implementing windows. There are, for example, approaches that use timestamps or time intervals for system-wide windows or buffer-based windows for each single processing step. Sliding-window query processing is also suitable to being implemented in parallel processors by exploiting parallelism between different windows and/or within each window extent. == Query processing == Since there are a lot of prototypes, there is no standardized architecture. However, most DSMS are based on the query processing in DBMS by using declarative languages to express queries, which are translated into a plan of operators. These plans can be optimized and executed. A query processing often consists of the following steps. === Formulation of continuous queries === The formulation of queries is mostly done using declarative languages like SQL in DBMS. Since there are no standardized query languages to express continuous queries, there are a lot of languages and variations. However, most of them are based on SQL, such as the Continuous Query Language (CQL), StreamSQL and ESP. There are also graphical approaches where each processing step is a box and the processing flow is expressed by arrows between the boxes. The language strongly depends on the processing model. For example, if windows are used for the processing, the definition of a window has to be expressed. In StreamSQL, a query with a sliding window for the last 10 elements looks like follows: This stream continuously calculates the average value of "price" of the last 10 tuples, but only considers those tuples whose prices are greater than 100.0. In the next step, the declarative query is translated into a logical query plan. A query plan is a directed graph where the nodes are operators and the edges describe the processing flow. Each operator in the query plan encapsulates the semantic of a specific operation, such as filtering or aggregation. In DSMSs that process relational data streams, the operators are equal or similar to the operators of the Relational algebra, so that there are operators for selection, projection, join, and set operations. This operator concept allows the very flexible and versatile processing of a DSMS. === Optimization of queries === The logical query plan can be optimized, which strongly depends on the streaming model. The basic concepts for optimizing continuous queries are equal to those from database systems. If there are relational data streams and the logical query plan is based on relational operators from the Relational algebra, a query optimizer can use the algebraic equivalences to optimize the plan. These may be, for example, to push selection operators down to the sources, because they are not so computationally intensive like join operators. Furthermore, there are also cost-based optimization techniques like in DBMS, where a query plan with the lowest costs is chosen from different equivalent query plans. One example is to choose the order of two successive join operators. In DBMS this decision is mostly done by certain statistics of the involved databases. But, since the data of a data streams is unknown in advance, there are no such statistics in a DSMS. However, it is possible to observe a data stream for a certain time to obtain some statistics. Using these statistics, the query can also be optimized later. So, in contrast to a DBMS, some DSMS allows to optimize the query even during runtime. Therefore, a DSMS needs some plan migration strategies to replace a running query plan with a new one. === Transformation of queries === Since a logical operator is only responsible for the semantics of an operation but does not consist of any algorithms, the logical query plan must be transformed into an executable counterpart. This is called a physical query plan. The distinction between a logical and a physical operator plan allows more than one implementation for the same logical operator. The join, for example, is logically the same, although it can be implemented by different algorithms like a Nested loop join or a Sort-merge join. Notice, these algorithms also strongly depend on the used stream and processing model. Finally, the query is available as a physical query plan. === Execution of queries === Since the physical query plan consists of executable algorithms, it can be directly executed. For this, the physical query plan is installed into the system. The bottom of the graph (of the query plan) is connected to the incoming sources, which can be everything like connectors to sensors. The top of the graph is connected to the outgoing sinks, which may be for example a visualization. Since most DSMSs are data-driven, a query is executed by pushing the incoming data elements from the source through the query plan to the sink. Each time when a data element passes an operator, the operator performs its specific operation on the data element and forwards the result to all successive operators. == Examples == AURORA, StreamBase Systems, Inc. Archived 23 March 2009 at the Wayback Machine Hortonworks DataFlow IBM Streams NIAGARA Query Engine NiagaraST: A Research Data Stream Management System at Portland State University Odysseus, an open source Java-based framework for Data Stream Management Systems Pipeline DB PIPES Archived 24 December 2016 at the Wayback Machine, webMethods Business Events QStream SAS Event Stream Processing SQLstream STREAM StreamGlobe StreamInsight TelegraphCQ WSO2 Stream Processor

  Read more →
• 

  Plaintext

  In cryptography, plaintext usually means unencrypted information pending input into cryptographic algorithms, usually encryption algorithms. This usually refers to data that is transmitted or stored unencrypted. == Overview == With the advent of computing, the term plaintext expanded beyond human-readable documents to mean any data, including binary files, in a form that can be viewed or used without requiring a key or other decryption device. Information—a message, document, file, etc.—if to be communicated or stored in an unencrypted form is referred to as plaintext. Plaintext is used as input to an encryption algorithm; the output is usually termed ciphertext, particularly when the algorithm is a cipher. Codetext is less often used, and almost always only when the algorithm involved is actually a code. Some systems use multiple layers of encryption, with the output of one encryption algorithm becoming "plaintext" input for the next. == Secure handling == Insecure handling of plaintext can introduce weaknesses into a cryptosystem by letting an attacker bypass the cryptography altogether. Plaintext is vulnerable in use and in storage, whether in electronic or paper format. Physical security means the securing of information and its storage media from physical, attack—for instance by someone entering a building to access papers, storage media, or computers. Discarded material, if not disposed of securely, may be a security risk. Even shredded documents and erased magnetic media might be reconstructed with sufficient effort. If plaintext is stored in a computer file, the storage media, the computer and its components, and all backups must be secure. Sensitive data is sometimes processed on computers whose mass storage is removable, in which case physical security of the removed disk is vital. In the case of securing a computer, useful (as opposed to handwaving) security must be physical (e.g., against burglary, brazen removal under cover of supposed repair, installation of covert monitoring devices, etc.), as well as virtual (e.g., operating system modification, illicit network access, Trojan programs). Wide availability of keydrives, which can plug into most modern computers and store large quantities of data, poses another severe security headache. A spy (perhaps posing as a cleaning person) could easily conceal one, and even swallow it if necessary. Discarded computers, disk drives and media are also a potential source of plaintexts. Most operating systems do not actually erase anything— they simply mark the disk space occupied by a deleted file as 'available for use', and remove its entry from the file system directory. The information in a file deleted in this way remains fully present until overwritten at some later time when the operating system reuses the disk space. With even low-end computers commonly sold with many gigabytes of disk space and rising monthly, this 'later time' may be months later, or never. Even overwriting the portion of a disk surface occupied by a deleted file is insufficient in many cases. Peter Gutmann of the University of Auckland wrote a celebrated 1996 paper on the recovery of overwritten information from magnetic disks; areal storage densities have gotten much higher since then, so this sort of recovery is likely to be more difficult than it was when Gutmann wrote. Modern hard drives automatically remap failing sectors, moving data to good sectors. This process makes information on those failing, excluded sectors invisible to the file system and normal applications. Special software, however, can still extract information from them. Some government agencies (e.g., US NSA) require that personnel physically pulverize discarded disk drives and, in some cases, treat them with chemical corrosives. This practice is not widespread outside government, however. Garfinkel and Shelat (2003) analyzed 158 second-hand hard drives they acquired at garage sales and the like, and found that less than 10% had been sufficiently sanitized. The others contained a wide variety of readable personal and confidential information. See data remanence. Physical loss is a serious problem. The US State Department, Department of Defense, and the British Secret Service have all had laptops with secret information, including in plaintext, lost or stolen. Appropriate disk encryption techniques can safeguard data on misappropriated computers or media. On occasion, even when data on host systems is encrypted, media that personnel use to transfer data between systems is plaintext because of poorly designed data policy. For example, in October 2007, HM Revenue and Customs lost CDs that contained the unencrypted records of 25 million child benefit recipients in the United Kingdom. Modern cryptographic systems resist known plaintext or even chosen plaintext attacks, and so may not be entirely compromised when plaintext is lost or stolen. Older systems resisted the effects of plaintext data loss on security with less effective techniques—such as padding and Russian copulation to obscure information in plaintext that could be easily guessed.

  Read more →
• 

  Neural operators

  Neural operators are a class of deep learning architectures designed to learn maps between infinite-dimensional function spaces. Neural operators represent an extension of traditional artificial neural networks, marking a departure from the typical focus on learning mappings between finite-dimensional Euclidean spaces or finite sets. Neural operators directly learn operators between function spaces; they can receive input functions, and the output function can be evaluated at any discretization. The primary application of neural operators is in learning surrogate maps for the solution operators of partial differential equations (PDEs), which are critical tools in modeling the natural environment. Standard PDE solvers can be time-consuming and computationally intensive, especially for complex systems. Neural operators have demonstrated improved performance in solving PDEs compared to existing machine learning methodologies while being significantly faster than numerical solvers. Neural operators have also been applied to various scientific and engineering disciplines such as turbulent flow modeling, computational mechanics, graph-structured data, and the geosciences. In particular, they have been applied to learning stress-strain fields in materials, classifying complex data like spatial transcriptomics, predicting multiphase flow in porous media, and carbon dioxide migration simulations. Finally, the operator learning paradigm allows learning maps between function spaces, and is different from parallel ideas of learning maps from finite-dimensional spaces to function spaces, and subsumes these settings as special cases when limited to a fixed input resolution. == Operator learning == Understanding and mapping relationships between function spaces has many applications in engineering and the sciences. In particular, one can cast the problem of solving partial differential equations as identifying a map between function spaces, such as from an initial condition to a time-evolved state. In other PDEs this map takes an input coefficient function and outputs a solution function. Operator learning is a machine learning paradigm to learn solution operators mapping the input function to the output function . Using traditional machine learning methods, addressing this problem would involve discretizing the infinite-dimensional input and output function spaces into finite-dimensional grids and applying standard learning models, such as neural networks. This approach reduces the operator learning to finite-dimensional function learning and has some limitations, such as generalizing to discretizations beyond the grid used in training. The primary properties of neural operators that differentiate them from traditional neural networks is discretization invariance and discretization convergence. Unlike conventional neural networks, which are fixed on the discretization of training data, neural operators can adapt to various discretizations without re-training. This property improves the robustness and applicability of neural operators in different scenarios, providing consistent performance across different resolutions and grids. == Definition and formulation == Architecturally, neural operators are similar to feed-forward neural networks in the sense that they are composed of alternating linear maps and non-linearities. Since neural operators act on and output functions, neural operators have been instead formulated as a sequence of alternating linear integral operators on function spaces and point-wise non-linearities. Using an analogous architecture to finite-dimensional neural networks, similar universal approximation theorems have been proven for neural operators. In particular, it has been shown that neural operators can approximate any continuous operator on a compact set. Neural operators seek to approximate some operator G : A → U {\displaystyle {\mathcal {G}}:{\mathcal {A}}\to {\mathcal {U}}} between function spaces A {\displaystyle {\mathcal {A}}} and U {\displaystyle {\mathcal {U}}} by building a parametric map G ϕ : A → U {\displaystyle {\mathcal {G}}_{\phi }:{\mathcal {A}}\to {\mathcal {U}}} . Such parametric maps G ϕ {\displaystyle {\mathcal {G}}_{\phi }} can generally be defined in the form G ϕ := Q ∘ σ ( W T + K T + b T ) ∘ ⋯ ∘ σ ( W 1 + K 1 + b 1 ) ∘ P , {\displaystyle {\mathcal {G}}_{\phi }:={\mathcal {Q}}\circ \sigma (W_{T}+{\mathcal {K}}_{T}+b_{T})\circ \cdots \circ \sigma (W_{1}+{\mathcal {K}}_{1}+b_{1})\circ {\mathcal {P}},} where P , Q {\displaystyle {\mathcal {P}},{\mathcal {Q}}} are the lifting (lifting the codomain of the input function to a higher dimensional space) and projection (projecting the codomain of the intermediate function to the output dimension) operators, respectively. These operators act pointwise on functions and are typically parametrized as multilayer perceptrons. σ {\displaystyle \sigma } is a pointwise nonlinearity, such as a rectified linear unit (ReLU), or a Gaussian error linear unit (GeLU). Each layer t = 1 , … , T {\displaystyle t=1,\dots ,T} has a respective local operator W t {\displaystyle W_{t}} (usually parameterized by a pointwise neural network), a kernel integral operator K t {\displaystyle {\mathcal {K}}_{t}} , and a bias function b t {\displaystyle b_{t}} . Given some intermediate functional representation v t {\displaystyle v_{t}} with domain D {\displaystyle D} in the t {\displaystyle t} -th hidden layer, a kernel integral operator K ϕ {\displaystyle {\mathcal {K}}_{\phi }} is defined as ( K ϕ v t ) ( x ) := ∫ D κ ϕ ( x , y , v t ( x ) , v t ( y ) ) v t ( y ) d y , {\displaystyle ({\mathcal {K}}_{\phi }v_{t})(x):=\int _{D}\kappa _{\phi }(x,y,v_{t}(x),v_{t}(y))v_{t}(y)dy,} where the kernel κ ϕ {\displaystyle \kappa _{\phi }} is a learnable implicit neural network, parametrized by ϕ {\displaystyle \phi } . In practice, one is often given the input function to the neural operator at a specific resolution. For instance, consider the setting where one is given the evaluation of v t {\displaystyle v_{t}} at n {\displaystyle n} points { y j } j n {\displaystyle \{y_{j}\}_{j}^{n}} . Borrowing from Nyström integral approximation methods such as Riemann sum integration and Gaussian quadrature, the above integral operation can be computed as follows: ∫ D κ ϕ ( x , y , v t ( x ) , v t ( y ) ) v t ( y ) d y ≈ ∑ j n κ ϕ ( x , y j , v t ( x ) , v t ( y j ) ) v t ( y j ) Δ y j , {\displaystyle \int _{D}\kappa _{\phi }(x,y,v_{t}(x),v_{t}(y))v_{t}(y)dy\approx \sum _{j}^{n}\kappa _{\phi }(x,y_{j},v_{t}(x),v_{t}(y_{j}))v_{t}(y_{j})\Delta _{y_{j}},} where Δ y j {\displaystyle \Delta _{y_{j}}} is the sub-area volume or quadrature weight associated to the point y j {\displaystyle y_{j}} . Thus, a simplified layer can be computed as v t + 1 ( x ) ≈ σ ( ∑ j n κ ϕ ( x , y j , v t ( x ) , v t ( y j ) ) v t ( y j ) Δ y j + W t ( v t ( y j ) ) + b t ( x ) ) . {\displaystyle v_{t+1}(x)\approx \sigma \left(\sum _{j}^{n}\kappa _{\phi }(x,y_{j},v_{t}(x),v_{t}(y_{j}))v_{t}(y_{j})\Delta _{y_{j}}+W_{t}(v_{t}(y_{j}))+b_{t}(x)\right).} The above approximation, along with parametrizing κ ϕ {\displaystyle \kappa _{\phi }} as an implicit neural network, results in the graph neural operator (GNO). There have been various parameterizations of neural operators for different applications. These typically differ in their parameterization of κ {\displaystyle \kappa } . The most popular instantiation is the Fourier neural operator (FNO). FNO takes κ ϕ ( x , y , v t ( x ) , v t ( y ) ) := κ ϕ ( x − y ) {\displaystyle \kappa _{\phi }(x,y,v_{t}(x),v_{t}(y)):=\kappa _{\phi }(x-y)} and by applying the convolution theorem, arrives at the following parameterization of the kernel integral operator: ( K ϕ v t ) ( x ) = F − 1 ( R ϕ ⋅ ( F v t ) ) ( x ) , {\displaystyle ({\mathcal {K}}_{\phi }v_{t})(x)={\mathcal {F}}^{-1}(R_{\phi }\cdot ({\mathcal {F}}v_{t}))(x),} where F {\displaystyle {\mathcal {F}}} represents the Fourier transform and R ϕ {\displaystyle R_{\phi }} represents the Fourier transform of some periodic function κ ϕ {\displaystyle \kappa _{\phi }} . That is, FNO parameterizes the kernel integration directly in Fourier space, using a prescribed number of Fourier modes. When the grid at which the input function is presented is uniform, the Fourier transform can be approximated using the discrete Fourier transform (DFT) with frequencies below some specified threshold. The discrete Fourier transform can be computed using a fast Fourier transform (FFT) implementation. == Training == Training neural operators is similar to the training process for a traditional neural network. Neural operators are typically trained in some Lp norm or Sobolev norm. In particular, for a dataset { ( a i , u i ) } i = 1 N {\displaystyle \{(a_{i},u_{i})\}_{i=1}^{N}} of size N {\displaystyle N} , neural operators minimize (a discretization of) L U ( { ( a i , u i ) } i = 1 N ) := ∑ i = 1 N ‖ u i − G θ ( a i ) ‖ U 2 {\displaystyle {\mathcal {L}}_{\mathca

  Read more →
• 

  Philco computers

  Philco was one of the pioneers of transistorized computers, also known as second-generation computers. After the company developed the surface-barrier transistor, which was much faster than previous point-contact types, it was awarded contracts for military and government computers. Commercialized derivatives of some of these designs became successful business and scientific computers. The TRANSAC (Transistor Automatic Computer) Model S-1000 was released as a scientific computer. The TRANSAC S-2000 mainframe computer system was first produced in 1958, and a family of compatible machines, with increasing performance, was released over the next several years. However, the mainframe computer market was dominated by IBM. Other companies could not deploy resources for development, customer support and marketing on the scale that IBM could afford, making competition in this segment difficult after the introduction of the IBM 360 family. Philco went bankrupt and was purchased in 1961 by Ford Motor Company, but the computer division carried on until the Philco division of Ford exited the computer business in 1963. The Ford company maintained one Philco mainframe in use until 1981. == The surface-barrier transistor == The surface-barrier transistor developed by Philco in 1953 had a much higher frequency response than the original point-contact transistors. The transistor was made of a thin crystal of germanium, which was electrolytically etched with pits on either side forming a very thin base region, on the order of 5 micrometers. Philco's process for etching was United States patent number 2,885,571. Philco surface-barrier transistors were used in TX-0, and in early models of what would become the DEC PDP product line. Although relatively fast, the small size of the devices limited their power to circuits operating at a few tens of milliwatts. == Military and government == Between 1955 and 1957, Philco built transistor computers for use in aircraft, models C-1000, C-1100, and C-1102, intended for airborne real-time applications. By 1957, the C-1102 had been used by a civilian sector customer. The BASICPAC AN/TYK 6V (first delivery in 1961), COMPAC AN/TYK 4V (not completed), and LOGICPAC systems were built for the US Army as transportable computer systems for use with their Fieldata concept of integrated information management. BASICPAC was a transistorized computer with up to 28,672 words of 38-bit core memory (including sign and parity), available in several configurations from a minimum system, to a truck-borne mobile version, to a fully expanded system. Basic clock periods was 1 microsecond (which gives a clock rate of 1 MHz), with 12 microsecond memory access and a fixed-point multiplication taking 242 microseconds. Input/output was by paper tape reader and punch, or through a teletypewriter. With additional hardware, magnetic tape storage was also available, with up to seven I/O devices. The instruction set had 31 basic operation codes and nine opcodes for I/O === CXPQ === Philco was contracted by the US Navy to build the CXPQ computer. One model was completed and installed at the David Taylor Model Basin. This design was later adapted to become the commercial TRANSAC S-2000. Only one CXPQ was built. The CXPQ is a 48-bit transistorized computer. === SOLO === In 1955, the National Security Agency through the US Navy contracted with Philco to produce a computer suitable for use as a workstation, with an architecture based on the vacuum-tube computer system called Atlas II already in use at the NSA, and similar to the commercial UNIVAC 1103. At the time, Philco was the largest producer of surface barrier transistors, which were the only type available with the speed and quantities required for a computer. The SOLO prototype was delivered in 1958, but required extensive debugging at NSA. Difficulties were encountered with core memory and power supplies. SOLO used paper tape and teleprinter machines for input and output. SOLO cost about $1 million US, and contained 8,000 transistors. While the system was extensively used for training, testing, research and development, no additional units were ordered. SOLO was removed from active service in 1963. The design of the SOLO became commercialized as Philco's TRANSAC Model S-1000. == Commercial == === S-1000 === The TRANSAC S-1000 was a scientific computer with a 36-bit word length and 4096 words of core memory. It was packaged in a container about the size of a large office desk, and used only 1.2 kilowatts, much less than vacuum-tube-based computers of similar capacity. In a 1961 survey, about 15 S-1000 computer installations had been identified. It weighed about 1,650 pounds (750 kg). === S-2000 === The TRANSAC S-2000 was a large mainframe system intended for both business and scientific work. It had a 48-bit word length and supported calculations in fixed point, floating point and binary-coded decimal formats. The original S-2000 "TRANSAC" (Transistor Automatic Computer) released in 1958 was later designated Model 210; it was used internally at Philco. Similar to the Control Data Corporation Model 1604, it was a 48-bit fully transistorized computer. Three succeeding models were released in the series, all compatible with the software of the original model. The Model 211 was introduced in 1960, using micro-alloy diffused field-effect transistors, requiring significant redesign of circuits compared to the original. The TRANSAC S-2000/Philco 210/211 weighed about 2,000 pounds (910 kg). By 1964, eighteen Model 210, eighteen Model 211 and seven Model 212 systems had been sold. After Philco was purchased by Ford Motor Company, the Model 212 was introduced in 1962 and released in 1963. It had 65,535 words of 48-bit memory. Initially made with 6-microsecond core memory, it had better performance than the IBM 7094 transistor computer. It was later upgraded in 1964 to 2-microsecond core memory, which gave the machine floating-point performance greater than the IBM 7030 Stretch computer. A Model 213 was announced in 1964 but never built. By that time competition from IBM had made the Philco computer operations no longer profitable for Ford, and the division was closed down. The Model 212 could carry out a floating-point multiplication in 22 microseconds. Each word contained two 24-bit instructions with 16 bits of address information and eight bits for the opcode. There were 225 different valid opcodes in the Model 212; invalid opcodes were detected and halted the machine. The CPU had an accumulator register of 48 bits, three general-purpose registers of 24 bits, and 32 index registers of 15 bits. Main memory size ranged from 4K words to 64K words. Only the first model had a magnetic drum memory; later editions used tape drives. The Model 212 weighed about 6,500 pounds (3.3 short tons; 2.9 t). Software for the S-2000 initially consisted of TAC (Translator-Assembler-Compiler), and ALTAC, a FORTRAN II-like language with some differences from the IBM 704 FORTRAN implementation. A COBOL compiler was also available, targeted at business applications. The Philco 2400 was the input/output system for the S-2000. Operations such as reading cards or printing were carried out through magnetic tapes, thereby offloading the S-2000 from relatively slow input/output processing. The 2400 had a 24-bit word length and could be supplied with 4K to 32K characters (1K to 8K words) of core memory, rated at 3-microsecond cycle time. The instruction set was aimed at character I/O use. The idea of base registers, implemented in Philco computers, influenced the design of IBM/360. The last Philco TRANSAC S-2000 Model 212 was taken out of service in December 1981, after 19 years of service at Ford.

  Read more →
• 

  Death of Molly Russell

  In November 2017, Molly Russell, a fourteen-year-old British schoolgirl from Harrow, London, was found dead in her bedroom by her parents. In an inquest, the coroner stated that she had died from an act of self-harm following depression and the results of social media consumption, including material on Instagram and Pinterest. She also had a Twitter account in which she documented her growing depression. == Life == Russell had been a pupil at Hatch End High School. At the inquest, the school's head teacher expressed shock that she was able to access distressing online content. Her parents stated that she had never shown any previous signs of struggle and was doing very well in school. It was revealed at the inquest that in the six months prior to her death, 2,100 of 16,300 pieces of content she had interacted with on Instagram were on topics such as self-harm, depression, and suicide. It was also noted that throughout her experience on social media, there were never any warning signs about the information she viewed on these platforms. == Subsequent events == Dr. Navin Venugopal, the child psychiatrist assigned to the case investigating her death, called the material she viewed "disturbing and distressing" and said he was unable to sleep well for weeks after viewing it. The coroner Andrew Walker concluded that Molly's death was "an act of self harm suffering from depression and the negative effects of online content". He issued a prevention of future deaths report regarding her death, in which he made a number of recommendations for operators of online platforms, including: separating platforms for adults and children age verification changes in policy on filtering of age-specific content adding features for parental supervision and control data retention of material viewed by children He suggested that this could be accomplished by either legislation or self-regulation. The lawyer representing her family at the inquest stated that the findings "captured all of the elements of why this material is so harmful." The case has been cited as a motivator for the passage of the Online Safety Act. A charity, the Molly Rose Foundation, was set up in her memory, with the goal of suicide prevention for young people. Meta and Pinterest are believed to have made substantial donations to the charity.

  Read more →