AI Chatbot Example

AI Chatbot Example — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

• 

  Intelligent control

  Intelligent control is a class of control techniques that use various artificial intelligence computing approaches like neural networks, Bayesian probability, fuzzy logic, machine learning, reinforcement learning, evolutionary computation and genetic algorithms. == Overview == Intelligent control can be divided into the following major sub-domains: Neural network control Machine learning control Reinforcement learning Bayesian control Fuzzy control Neuro-fuzzy control Expert Systems Genetic control New control techniques are created continuously as new models of intelligent behavior are created and computational methods developed to support them. === Neural network controller === Neural networks have been used to solve problems in almost all spheres of science and technology. Neural network control basically involves two steps: System identification Control It has been shown that a feedforward network with nonlinear, continuous and differentiable activation functions have universal approximation capability. Recurrent networks have also been used for system identification. Given, a set of input-output data pairs, system identification aims to form a mapping among these data pairs. Such a network is supposed to capture the dynamics of a system. For the control part, deep reinforcement learning has shown its ability to control complex systems. === Bayesian controllers === Bayesian probability has produced a number of algorithms that are in common use in many advanced control systems, serving as state space estimators of some variables that are used in the controller. The Kalman filter and the Particle filter are two examples of popular Bayesian control components. The Bayesian approach to controller design often requires an important effort in deriving the so-called system model and measurement model, which are the mathematical relationships linking the state variables to the sensor measurements available in the controlled system. In this respect, it is very closely linked to the system-theoretic approach to control design.

  Read more →
• 

  Multiple kernel learning

  Multiple kernel learning refers to a set of machine learning methods that use a predefined set of kernels and learn an optimal linear or non-linear combination of kernels as part of the algorithm. Reasons to use multiple kernel learning include a) the ability to select for an optimal kernel and parameters from a larger set of kernels, reducing bias due to kernel selection while allowing for more automated machine learning methods, and b) combining data from different sources (e.g. sound and images from a video) that have different notions of similarity and thus require different kernels. Instead of creating a new kernel, multiple kernel algorithms can be used to combine kernels already established for each individual data source. Multiple kernel learning approaches have been used in many applications, such as event recognition in video, object recognition in images, and biomedical data fusion. == Algorithms == Multiple kernel learning algorithms have been developed for supervised, semi-supervised, as well as unsupervised learning. Most work has been done on the supervised learning case with linear combinations of kernels, however, many algorithms have been developed. The basic idea behind multiple kernel learning algorithms is to add an extra parameter to the minimization problem of the learning algorithm. As an example, consider the case of supervised learning of a linear combination of a set of n {\displaystyle n} kernels K {\displaystyle K} . We introduce a new kernel K ′ = ∑ i = 1 n β i K i {\displaystyle K'=\sum _{i=1}^{n}\beta _{i}K_{i}} , where β {\displaystyle \beta } is a vector of coefficients for each kernel. Because the kernels are additive (due to properties of reproducing kernel Hilbert spaces), this new function is still a kernel. For a set of data X {\displaystyle X} with labels Y {\displaystyle Y} , the minimization problem can then be written as min β , c E ( Y , K ′ c ) + R ( K , c ) {\displaystyle \min _{\beta ,c}\mathrm {E} (Y,K'c)+R(K,c)} where E {\displaystyle \mathrm {E} } is an error function and R {\displaystyle R} is a regularization term. E {\displaystyle \mathrm {E} } is typically the square loss function (Tikhonov regularization) or the hinge loss function (for SVM algorithms), and R {\displaystyle R} is usually an ℓ n {\displaystyle \ell _{n}} norm or some combination of the norms (i.e. elastic net regularization). This optimization problem can then be solved by standard optimization methods. Adaptations of existing techniques such as the Sequential Minimal Optimization have also been developed for multiple kernel SVM-based methods. === Supervised learning === For supervised learning, there are many other algorithms that use different methods to learn the form of the kernel. The following categorization has been proposed by Gonen and Alpaydın (2011) ==== Fixed rules approaches ==== Fixed rules approaches such as the linear combination algorithm described above use rules to set the combination of the kernels. These do not require parameterization and use rules like summation and multiplication to combine the kernels. The weighting is learned in the algorithm. Other examples of fixed rules include pairwise kernels, which are of the form k ( ( x 1 i , x 1 j ) , ( x 2 i , x 2 j ) ) = k ( x 1 i , x 2 i ) k ( x 1 j , x 2 j ) + k ( x 1 i , x 2 j ) k ( x 1 j , x 2 i ) {\displaystyle k((x_{1i},x_{1j}),(x_{2i},x_{2j}))=k(x_{1i},x_{2i})k(x_{1j},x_{2j})+k(x_{1i},x_{2j})k(x_{1j},x_{2i})} . These pairwise approaches have been used in predicting protein-protein interactions. ==== Heuristic approaches ==== These algorithms use a combination function that is parameterized. The parameters are generally defined for each individual kernel based on single-kernel performance or some computation from the kernel matrix. Examples of these include the kernel from Tenabe et al. (2008). Letting π m {\displaystyle \pi _{m}} be the accuracy obtained using only K m {\displaystyle K_{m}} , and letting δ {\displaystyle \delta } be a threshold less than the minimum of the single-kernel accuracies, we can define β m = π m − δ ∑ h = 1 n ( π h − δ ) {\displaystyle \beta _{m}={\frac {\pi _{m}-\delta }{\sum _{h=1}^{n}(\pi _{h}-\delta )}}} Other approaches use a definition of kernel similarity, such as A ( K 1 , K 2 ) = ⟨ K 1 , K 2 ⟩ ⟨ K 1 , K 1 ⟩ ⟨ K 2 , K 2 ⟩ {\displaystyle A(K_{1},K_{2})={\frac {\langle K_{1},K_{2}\rangle }{\sqrt {\langle K_{1},K_{1}\rangle \langle K_{2},K_{2}\rangle }}}} Using this measure, Qui and Lane (2009) used the following heuristic to define β m = A ( K m , Y Y T ) ∑ h = 1 n A ( K h , Y Y T ) {\displaystyle \beta _{m}={\frac {A(K_{m},YY^{T})}{\sum _{h=1}^{n}A(K_{h},YY^{T})}}} ==== Optimization approaches ==== These approaches solve an optimization problem to determine parameters for the kernel combination function. This has been done with similarity measures and structural risk minimization approaches. For similarity measures such as the one defined above, the problem can be formulated as follows: max β , tr ⁡ ( K t r a ′ ) = 1 , K ′ ≥ 0 A ( K t r a ′ , Y Y T ) . {\displaystyle \max _{\beta ,\operatorname {tr} (K'_{tra})=1,K'\geq 0}A(K'_{tra},YY^{T}).} where K t r a ′ {\displaystyle K'_{tra}} is the kernel of the training set. Structural risk minimization approaches that have been used include linear approaches, such as that used by Lanckriet et al. (2002). We can define the implausibility of a kernel ω ( K ) {\displaystyle \omega (K)} to be the value of the objective function after solving a canonical SVM problem. We can then solve the following minimization problem: min tr ⁡ ( K t r a ′ ) = c ω ( K t r a ′ ) {\displaystyle \min _{\operatorname {tr} (K'_{tra})=c}\omega (K'_{tra})} where c {\displaystyle c} is a positive constant. Many other variations exist on the same idea, with different methods of refining and solving the problem, e.g. with nonnegative weights for individual kernels and using non-linear combinations of kernels. ==== Bayesian approaches ==== Bayesian approaches put priors on the kernel parameters and learn the parameter values from the priors and the base algorithm. For example, the decision function can be written as f ( x ) = ∑ i = 0 n α i ∑ m = 1 p η m K m ( x i m , x m ) {\displaystyle f(x)=\sum _{i=0}^{n}\alpha _{i}\sum _{m=1}^{p}\eta _{m}K_{m}(x_{i}^{m},x^{m})} η {\displaystyle \eta } can be modeled with a Dirichlet prior and α {\displaystyle \alpha } can be modeled with a zero-mean Gaussian and an inverse gamma variance prior. This model is then optimized using a customized multinomial probit approach with a Gibbs sampler. These methods have been used successfully in applications such as protein fold recognition and protein homology problems ==== Boosting approaches ==== Boosting approaches add new kernels iteratively until some stopping criteria that is a function of performance is reached. An example of this is the MARK model developed by Bennett et al. (2002) f ( x ) = ∑ i = 1 N ∑ m = 1 P α i m K m ( x i m , x m ) + b {\displaystyle f(x)=\sum _{i=1}^{N}\sum _{m=1}^{P}\alpha _{i}^{m}K_{m}(x_{i}^{m},x^{m})+b} The parameters α i m {\displaystyle \alpha _{i}^{m}} and b {\displaystyle b} are learned by gradient descent on a coordinate basis. In this way, each iteration of the descent algorithm identifies the best kernel column to choose at each particular iteration and adds that to the combined kernel. The model is then rerun to generate the optimal weights α i {\displaystyle \alpha _{i}} and b {\displaystyle b} . === Semisupervised learning === Semisupervised learning approaches to multiple kernel learning are similar to other extensions of supervised learning approaches. An inductive procedure has been developed that uses a log-likelihood empirical loss and group LASSO regularization with conditional expectation consensus on unlabeled data for image categorization. We can define the problem as follows. Let L = ( x i , y i ) {\displaystyle L={(x_{i},y_{i})}} be the labeled data, and let U = x i {\displaystyle U={x_{i}}} be the set of unlabeled data. Then, we can write the decision function as follows. f ( x ) = α 0 + ∑ i = 1 | L | α i K i ( x ) {\displaystyle f(x)=\alpha _{0}+\sum _{i=1}^{|L|}\alpha _{i}K_{i}(x)} The problem can be written as min f L ( f ) + λ R ( f ) + γ Θ ( f ) {\displaystyle \min _{f}L(f)+\lambda R(f)+\gamma \Theta (f)} where L {\displaystyle L} is the loss function (weighted negative log-likelihood in this case), R {\displaystyle R} is the regularization parameter (Group LASSO in this case), and Θ {\displaystyle \Theta } is the conditional expectation consensus (CEC) penalty on unlabeled data. The CEC penalty is defined as follows. Let the marginal kernel density for all the data be g m π ( x ) = ⟨ ϕ m π , ψ m ( x ) ⟩ {\displaystyle g_{m}^{\pi }(x)=\langle \phi _{m}^{\pi },\psi _{m}(x)\rangle } where ψ m ( x ) = [ K m ( x 1 , x ) , … , K m ( x L , x ) ] T {\displaystyle \psi _{m}(x)=[K_{m}(x_{1},x),\ldots ,K_{m}(x_{L},x)]^{T}} (the kernel distance between the labe

  Read more →
• 

  Arabic Speech Corpus

  The Arabic Speech Corpus is a Modern Standard Arabic (MSA) speech corpus for speech synthesis. The corpus contains phonetic and orthographic transcriptions of more than 3.7 hours of MSA speech aligned with recorded speech on the phoneme level. The annotations include word stress marks on the individual phonemes. The Arabic Speech Corpus was built as part of a doctoral project by Nawar Halabi at the University of Southampton funded by MicroLinkPC who own an exclusive license to commercialise the corpus, but the corpus is available for strictly non-commercial purposes through the official Arabic Speech Corpus website. It is distributed under the Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License. == Purpose == The corpus was mainly built for speech synthesis purposes, specifically Speech Synthesis, but the corpus has been used for building HMM based voices in Arabic. It was also used to automatically align other speech corpora with their phonetic transcript and could be used as part of a larger corpus for training speech recognition systems. == Contents == The package contains the following: 1813 .wav files containing spoken utterances. 1813 .lab files containing text utterances. 1813 .TextGrid files containing the phoneme labels with time stamps of the boundaries where these occur in the .wav files. phonetic-transcript.txt which has the form "[wav_filename]" "[Phoneme Sequence]" in every line. orthographic-transcript.txt which has the form "[wav_filename]" "[Orthographic Transcript]" in every line. Orthography is in Buckwalter Format which is friendlier where there is software that does not read Arabic script. It can be easily converted back to Arabic. There is an extra 18 minutes of fully annotated corpus (separate from above but with the same structure as above) which was used to evaluated the corpus (see PhD thesis). The corpus was also used to prove that using automatically extracted, orthography-based stress marks improve the quality of speech synthesis in MSA.

  Read more →
• 

  Relief (feature selection)

  Relief is an algorithm developed by Kenji Kira and Larry Rendell in 1992 that takes a filter-method approach to feature selection that is notably sensitive to feature interactions. It was originally designed for application to binary classification problems with discrete or numerical features. Relief calculates a feature score for each feature which can then be applied to rank and select top scoring features for feature selection. Alternatively, these scores may be applied as feature weights to guide downstream modeling. Relief feature scoring is based on the identification of feature value differences between nearest neighbor instance pairs. If a feature value difference is observed in a neighboring instance pair with the same class (a 'hit'), the feature score decreases. Alternatively, if a feature value difference is observed in a neighboring instance pair with different class values (a 'miss'), the feature score increases. The original Relief algorithm has since inspired a family of Relief-based feature selection algorithms (RBAs), including the ReliefF algorithm. Beyond the original Relief algorithm, RBAs have been adapted to (1) perform more reliably in noisy problems, (2) generalize to multi-class problems (3) generalize to numerical outcome (i.e. regression) problems, and (4) to make them robust to incomplete (i.e. missing) data. To date, the development of RBA variants and extensions has focused on four areas; (1) improving performance of the 'core' Relief algorithm, i.e. examining strategies for neighbor selection and instance weighting, (2) improving scalability of the 'core' Relief algorithm to larger feature spaces through iterative approaches, (3) methods for flexibly adapting Relief to different data types, and (4) improving Relief run efficiency. Their strengths are that they are not dependent on heuristics, they run in low-order polynomial time, and they are noise-tolerant and robust to feature interactions, as well as being applicable for binary or continuous data; however, it does not discriminate between redundant features, and low numbers of training instances fool the algorithm. == Relief Algorithm == Take a data set with n instances of p features, belonging to two known classes. Within the data set, each feature should be scaled to the interval [0 1] (binary data should remain as 0 and 1). The algorithm will be repeated m times. Start with a p-long weight vector (W) of zeros. At each iteration, take the feature vector (X) belonging to one random instance, and the feature vectors of the instance closest to X (by Euclidean distance) from each class. The closest same-class instance is called 'near-hit', and the closest different-class instance is called 'near-miss'. Update the weight vector such that W i = W i − ( x i − n e a r H i t i ) 2 + ( x i − n e a r M i s s i ) 2 , {\displaystyle W_{i}=W_{i}-(x_{i}-\mathrm {nearHit} _{i})^{2}+(x_{i}-\mathrm {nearMiss} _{i})^{2},} where i {\displaystyle i} indexes the components and runs from 1 to p. Thus the weight of any given feature decreases if it differs from that feature in nearby instances of the same class more than nearby instances of the other class, and increases in the reverse case. After m iterations, divide each element of the weight vector by m. This becomes the relevance vector. Features are selected if their relevance is greater than a threshold τ. Kira and Rendell's experiments showed a clear contrast between relevant and irrelevant features, allowing τ to be determined by inspection. However, it can also be determined by Chebyshev's inequality for a given confidence level (α) that a τ of 1/sqrt(αm) is good enough to make the probability of a Type I error less than α, although it is stated that τ can be much smaller than that. Relief was also described as generalizable to multinomial classification by decomposition into a number of binary problems. == ReliefF Algorithm == Kononenko et al. propose a number of updates to Relief. Firstly, they find the near-hit and near-miss instances using the Manhattan (L1) norm rather than the Euclidean (L2) norm, although the rationale is not specified. Furthermore, they found taking the absolute differences between xi and near-hiti, and xi and near-missi to be sufficient when updating the weight vector (rather than the square of those differences). === Reliable probability estimation === Rather than repeating the algorithm m times, implement it exhaustively (i.e. n times, once for each instance) for relatively small n (up to one thousand). Furthermore, rather than finding the single nearest hit and single nearest miss, which may cause redundant and noisy attributes to affect the selection of the nearest neighbors, ReliefF searches for k nearest hits and misses and averages their contribution to the weights of each feature. k can be tuned for any individual problem. === Incomplete data === In ReliefF, the contribution of missing values to the feature weight is determined using the conditional probability that two values should be the same or different, approximated with relative frequencies from the data set. This can be calculated if one or both features are missing. === Multi-class problems === Rather than use Kira and Rendell's proposed decomposition of a multinomial classification into a number of binomial problems, ReliefF searches for k near misses from each different class and averages their contributions for updating W, weighted with the prior probability of each class. == Other Relief-based Algorithm Extensions/Derivatives == The following RBAs are arranged chronologically from oldest to most recent. They include methods for improving (1) the core Relief algorithm concept, (2) iterative approaches for scalability, (3) adaptations to different data types, (4) strategies for computational efficiency, or (5) some combination of these goals. For more on RBAs see these book chapters or this most recent review paper. === RRELIEFF === Robnik-Šikonja and Kononenko propose further updates to ReliefF, making it appropriate for regression. === Relieved-F === Introduced deterministic neighbor selection approach and a new approach for incomplete data handling. === Iterative Relief === Implemented method to address bias against non-monotonic features. Introduced the first iterative Relief approach. For the first time, neighbors were uniquely determined by a radius threshold and instances were weighted by their distance from the target instance. === I-RELIEF === Introduced sigmoidal weighting based on distance from target instance. All instance pairs (not just a defined subset of neighbors) contributed to score updates. Proposed an on-line learning variant of Relief. Extended the iterative Relief concept. Introduced local-learning updates between iterations for improved convergence. === TuRF (a.k.a. Tuned ReliefF) === Specifically sought to address noise in large feature spaces through the recursive elimination of features and the iterative application of ReliefF. === Evaporative Cooling ReliefF === Similarly seeking to address noise in large feature spaces. Utilized an iterative `evaporative' removal of lowest quality features using ReliefF scores in association with mutual information. === EReliefF (a.k.a. Extended ReliefF) === Addressing issues related to incomplete and multi-class data. === VLSReliefF (a.k.a. Very Large Scale ReliefF) === Dramatically improves the efficiency of detecting 2-way feature interactions in very large feature spaces by scoring random feature subsets rather than the entire feature space. === ReliefMSS === Introduced calculation of feature weights relative to average feature 'diff' between instance pairs. === SURF === SURF identifies nearest neighbors (both hits and misses) based on a distance threshold from the target instance defined by the average distance between all pairs of instances in the training data. Results suggest improved power to detect 2-way epistatic interactions over ReliefF. === SURF (a.k.a. SURFStar) === SURF extends the SURF algorithm to not only utilized 'near' neighbors in scoring updates, but 'far' instances as well, but employing inverted scoring updates for 'far instance pairs. Results suggest improved power to detect 2-way epistatic interactions over SURF, but an inability to detect simple main effects (i.e. univariate associations). === SWRF === SWRF extends the SURF algorithm adopting sigmoid weighting to take distance from the threshold into account. Also introduced a modular framework for further developing RBAs called MoRF. === MultiSURF (a.k.a. MultiSURFStar) === MultiSURF extends the SURF algorithm adapting the near/far neighborhood boundaries based on the average and standard deviation of distances from the target instance to all others. MultiSURF uses the standard deviation to define a dead-band zone where 'middle-distance' instances do not contribute to scoring. Evidence suggests MultiSURF performs best in detecting pure 2-way feature interactions. === Reli

  Read more →
• 

  Rabbit r1

  The Rabbit r1 is an artificial intelligence personal assistant device developed by the American technology startup Rabbit Inc and co-designed by Teenage Engineering. It was announced at the 2024 Consumer Electronics Show as a handheld device intended to perform digital tasks through voice commands, touch interaction, and web-based AI agents. The r1 was marketed around Rabbit's concept of a "large action model" (LAM), which the company described as software able to operate websites and services on behalf of users. The device runs rabbitOS, an operating system based on the Android Open Source Project. Its services have included AI search, image recognition, voice interaction, music playback, rideshare and food-ordering integrations, and later experimental web-agent features such as LAM Playground and teach mode. Initial reviews were largely negative, with reviewers criticizing the device's limited functionality, bugs, and unclear advantages over a smartphone. Critics also questioned Rabbit's claims after the r1 software was shown to run on an Android phone. Rabbit continued to issue software updates after launch, including rabbitOS 2 in September 2025, which introduced a redesigned card-based interface, gesture navigation, and a "creations" feature for generating small software tools and experiences on the device. Rabbit Inc was founded by Jesse Lyu Cheng. == Hardware == Display: A 2.88-inch touchscreen for interactive user input. Input: push-to-talk button to activate voice commands; scroll wheel; Gyroscope; Magnetometer; Accelerometer; GPS. Camera: 8 MP single camera, with a resolution of 3264x2448, allowing for the connected external AI to use computer vision. Audio: Equipped with a speaker and dual microphones for audio interaction. Connectivity: Supports Wi-Fi and cellular connections via a SIM card slot to access internet services. Processor: Runs on a 2.3GHz MediaTek Helio P35 processor. Memory: Contains 4GB of RAM for operational tasks. Storage: Offers 128GB of internal storage for data. Ports: Utilizes a USB-C port for charging and data connections. == Software == The Rabbit r1 runs rabbitOS, which is based on the Android Open Source Project (AOSP), specifically Android 13. Rabbit founder Jesse Lyu described rabbitOS as a "very bespoke AOSP" after reports that the r1's software could be run on a conventional Android phone. Rabbit described the r1 as using a large action model (LAM), a type of AI agent intended to perform tasks across software interfaces rather than only answer questions. At launch, the device supported a limited set of services, including AI search, vision features, music playback, and some third-party integrations. Perplexity.ai was one of the AI services used to answer user queries. In 2024, Rabbit released several software updates that added features and attempted to address early criticism of the device. In July 2024, the company launched "beta rabbit", an advanced search and conversation mode for more complex queries. In October 2024, it released LAM Playground, a web-based agent feature intended to let the r1 operate websites on behalf of users. Reviewers found the feature experimental; Android Authority reported that it could perform some navigation tasks but struggled with CAPTCHAs, loops, and unintended behavior. In November 2024, Rabbit introduced a beta "teach mode", which allowed users to demonstrate web-based tasks in the Rabbithole web portal and later ask the r1 to repeat them. The company described teach mode as experimental, and The Verge noted that Rabbit warned users that results could be unpredictable and that CAPTCHA-protected sites could cause problems. Rabbit released rabbitOS 2 in September 2025. The update redesigned the interface around a card-based layout, added additional touchscreen gestures, and introduced "creations", a feature that lets users generate simple software tools, games, and interfaces through natural-language prompts. Coverage of the update described it as a major software overhaul rather than new hardware. == Reception == === Funding === Rabbit raised $20 million in funding from Khosla Ventures, Synergis Capital and Kakao Investment in October 2023. The company announced an additional $10 million in funding in December 2023. === Sales === Following its announcement at the 2024 Consumer Electronics Show, 130,000 units were sold. On August 13, 2024, Rabbit announced that sales of r1 had expanded to the entire European Union (except Malta) and United Kingdom. On August 21, 2024, sales of r1 expanded to Singapore. === Reviews === The r1 was met with strong criticism immediately after Rabbit began shipping the device. Some reviews questioned what the device was able to do that a smartphone could not, while comparing it to the similar Humane Ai Pin. YouTuber Marques Brownlee called the device "barely reviewable". Android Authority's Mishaal Rahman managed to install Rabbit r1's software on a Pixel 6a smartphone, after a tipster shared an APK file. The Verge echoed the claims made by Rahman. In response, Lyu published statements confirming its use of Android, but denying that the r1 is an Android app. Mashable called its Vision features impressive, but said that "these praise-worthy features are overshadowed by buggy performance". Ars Technica wrote a blog post claiming "the company is blocking access from bootleg APKs". TechCrunch gave a slightly more positive review, calling the device a "fun peep at a possible future", but could not "advise anyone to buy one now." Shortly after the launch of r1, Rabbit began a weekly cadence of software updates to address much of the criticism from the early reviews, including "battery and GPS performance, time zone selection, and more". Digital Trends said the Magic Camera feature "takes the most mundane, ordinary, and badly composed photos and makes something fun and eye-catching from them." Mashable said the "beta rabbit" feature "makes Rabbit R1 more conversational and intelligent". Later coverage noted that Rabbit continued to update the r1 after its poorly received launch. The Verge reported in September 2024 that about 5,000 of roughly 100,000 purchasers were using the device at any given moment, citing Lyu, and described the product as having launched before it was ready. In 2025, coverage of rabbitOS 2 described the update as an attempt to reset the device's software experience after the criticism of its original release. == Controversies == === GAMA project === Rabbit Inc has garnered attention due to allegations surrounding its funding and the company's past projects. The company came under scrutiny when Stephen Findeisen, known as Coffeezilla on YouTube, published a video in May 2024, alleging that Rabbit Incorporation was "built on a scam". Rabbit Incorporation, initially named Cyber Manufacturing Co, rebranded just two months before launching the Rabbit R1. The company, under its former name, raised $6 million in November 2021 for a project called GAMA, described as a "Next Generation NFT Project." Jesse Lyu, the CEO of Rabbit Incorporation, referred to GAMA as a "fun little project." Coffeezilla, who investigates influencer scams, highlighted old Clubhouse recordings of Jesse Lyu discussing the GAMA project. In these recordings, Lyu emphasized the substantial funding behind GAMA and its potential to be a revolutionary, carbon-negative cryptocurrency. Coffeezilla questioned the whereabouts of the funds raised for GAMA, estimating that approximately $1 million in refunds to investors remained unresolved. He suggested that the rebranding to Rabbit Incorporation and the shift to developing the Rabbit R1 were attempts to divert from the GAMA project's issues. In response to Coffeezilla's inquiries, Rabbit Incorporation stated that the $6 million raised was used for the GAMA project. The company said that NFTs cannot be refunded unless the owner agrees to "burn" them on the blockchain. Rabbit Incorporation also said that the GAMA project was open-sourced and returned to the community, aligning with community feedback. They also mentioned that efforts to buy back NFTs were made to counteract malicious trading and maintain market stability. === Security === In June 2024, Engadget reported that the Rabbitude team, a community reverse engineering project, had gained access to the r1's codebase revealing that r1's software contained several hardcoded API keys in its code for ElevenLabs, Microsoft Azure, Yelp, and Google Maps, potentially allowing unauthorized access to r1 responses, including those containing the users' personal information. For a short time, Rabbit immediately began revoking and rotating those secrets and confirmed that the code was leaked by an employee who had "been terminated and remains under investigation". In July 2024, the company revealed that all user chats and device pairing data were logged on the r1 with no ability to delete them. This meant that lost or stolen devices could be used to extract user

  Read more →
• 

  Elastic net regularization

  In statistics and, in particular, in the fitting of linear or logistic regression models, the elastic net is a regularized regression method that linearly combines the L1 and L2 penalties of the lasso and ridge methods. Nevertheless, elastic net regularization is typically more accurate than both methods with regard to reconstruction. == Specification == The elastic net method overcomes the limitations of the LASSO (least absolute shrinkage and selection operator) method which uses a penalty function based on ‖ β ‖ 1 = ∑ j = 1 p | β j | . {\displaystyle \|\beta \|_{1}=\textstyle \sum _{j=1}^{p}|\beta _{j}|.} Use of this penalty function has several limitations. For example, in the "large p, small n" case (high-dimensional data with few examples), the LASSO selects at most n variables before it saturates. Also if there is a group of highly correlated variables, then the LASSO tends to select one variable from a group and ignore the others. To overcome these limitations, the elastic net adds a quadratic part ( ‖ β ‖ 2 {\displaystyle \|\beta \|^{2}} ) to the penalty, which when used alone is ridge regression (known also as Tikhonov regularization). The estimates from the elastic net method are defined by β ^ ≡ argmin β ( ‖ y − X β ‖ 2 + λ 2 ‖ β ‖ 2 + λ 1 ‖ β ‖ 1 ) . {\displaystyle {\hat {\beta }}\equiv {\underset {\beta }{\operatorname {argmin} }}(\|y-X\beta \|^{2}+\lambda _{2}\|\beta \|^{2}+\lambda _{1}\|\beta \|_{1}).} The quadratic penalty term makes the loss function strongly convex, and it therefore has a unique minimum. The elastic net method includes the LASSO and ridge regression: in other words, each of them is a special case where λ 1 = λ , λ 2 = 0 {\displaystyle \lambda _{1}=\lambda ,\lambda _{2}=0} or λ 1 = 0 , λ 2 = λ {\displaystyle \lambda _{1}=0,\lambda _{2}=\lambda } . Meanwhile, the naive version of elastic net method finds an estimator in a two-stage procedure : first for each fixed λ 2 {\displaystyle \lambda _{2}} it finds the ridge regression coefficients, and then does a LASSO type shrinkage. This kind of estimation incurs a double amount of shrinkage, which leads to increased bias and poor predictions. To improve the prediction performance, sometimes the coefficients of the naive version of elastic net is rescaled by multiplying the estimated coefficients by ( 1 + λ 2 ) {\displaystyle (1+\lambda _{2})} . Examples of where the elastic net method has been applied are: Support vector machine Metric learning Portfolio optimization Cancer prognosis == Reduction to support vector machine == It was proven in 2014 that the elastic net can be reduced to the linear support vector machine. A similar reduction was previously proven for the LASSO in 2014. The authors showed that for every instance of the elastic net, an artificial binary classification problem can be constructed such that the hyper-plane solution of a linear support vector machine (SVM) is identical to the solution β {\displaystyle \beta } (after re-scaling). The reduction immediately enables the use of highly optimized SVM solvers for elastic net problems. It also enables the use of GPU acceleration, which is often already used for large-scale SVM solvers. The reduction is a simple transformation of the original data and regularization constants X ∈ R n × p , y ∈ R n , λ 1 ≥ 0 , λ 2 ≥ 0 {\displaystyle X\in {\mathbb {R} }^{n\times p},y\in {\mathbb {R} }^{n},\lambda _{1}\geq 0,\lambda _{2}\geq 0} into new artificial data instances and a regularization constant that specify a binary classification problem and the SVM regularization constant X 2 ∈ R 2 p × n , y 2 ∈ { − 1 , 1 } 2 p , C ≥ 0. {\displaystyle X_{2}\in {\mathbb {R} }^{2p\times n},y_{2}\in \{-1,1\}^{2p},C\geq 0.} Here, y 2 {\displaystyle y_{2}} consists of binary labels − 1 , 1 {\displaystyle {-1,1}} . When 2 p > n {\displaystyle 2p>n} it is typically faster to solve the linear SVM in the primal, whereas otherwise the dual formulation is faster. Some authors have referred to the transformation as Support Vector Elastic Net (SVEN), and provided the following MATLAB pseudo-code: == Software == "Glmnet: Lasso and elastic-net regularized generalized linear models" is a software which is implemented as an R source package and as a MATLAB toolbox. This includes fast algorithms for estimation of generalized linear models with ℓ1 (the lasso), ℓ2 (ridge regression) and mixtures of the two penalties (the elastic net) using cyclical coordinate descent, computed along a regularization path. JMP Pro 11 includes elastic net regularization, using the Generalized Regression personality with Fit Model. "pensim: Simulation of high-dimensional data and parallelized repeated penalized regression" implements an alternate, parallelised "2D" tuning method of the ℓ parameters, a method claimed to result in improved prediction accuracy. scikit-learn includes linear regression and logistic regression with elastic net regularization. SVEN, a Matlab implementation of Support Vector Elastic Net. This solver reduces the Elastic Net problem to an instance of SVM binary classification and uses a Matlab SVM solver to find the solution. Because SVM is easily parallelizable, the code can be faster than Glmnet on modern hardware. SpaSM, a Matlab implementation of sparse regression, classification and principal component analysis, including elastic net regularized regression. Apache Spark provides support for Elastic Net Regression in its MLlib machine learning library. The method is available as a parameter of the more general LinearRegression class. SAS (software) The SAS procedure Glmselect and SAS Viya procedure Regselect support the use of elastic net regularization for model selection.

  Read more →
• 

  Prefrontal cortex basal ganglia working memory

  Prefrontal cortex basal ganglia working memory (PBWM) is an algorithm that models working memory in the prefrontal cortex and the basal ganglia. It can be compared to long short-term memory (LSTM) in functionality, but is more biologically explainable. It uses the primary value learned value model to train prefrontal cortex working-memory updating system, based on the biology of the prefrontal cortex and basal ganglia. It is used as part of the Leabra framework and was implemented in Emergent in 2019. == Abstract == The prefrontal cortex has long been thought to subserve both working memory (the holding of information online for processing) and "executive" functions (deciding how to manipulate working memory and perform processing). Although many computational models of working memory have been developed, the mechanistic basis of executive function remains elusive. PBWM is a computational model of the prefrontal cortex to control both itself and other brain areas in a strategic, task-appropriate manner. These learning mechanisms are based on subcortical structures in the midbrain, basal ganglia and amygdala, which together form an actor/critic architecture. The critic system learns which prefrontal representations are task-relevant and trains the actor, which in turn provides a dynamic gating mechanism for controlling working memory updating. Computationally, the learning mechanism is designed to simultaneously solve the temporal and structural credit assignment problems. The model's performance compares favorably with standard backpropagation-based temporal learning mechanisms on the challenging 1-2-AX working memory task, and other benchmark working memory tasks. == Model == First, there are multiple separate stripes (groups of units) in the prefrontal cortex and striatum layers. Each stripe can be independently updated, such that this system can remember several different things at the same time, each with a different "updating policy" of when memories are updated and maintained. The active maintenance of the memory is in prefrontal cortex (PFC), and the updating signals (and updating policy more generally) come from the striatum units (a subset of basal ganglia units). PVLV provides reinforcement learning signals to train up the dynamic gating system in the basal ganglia. === Sensory input and motor output === The sensory input is connected to the posterior cortex which is connected to the motor output. The sensory input is also linked to the PVLV system. === Posterior cortex === The posterior cortex form the hidden layers of the input/output mapping. The PFC is connected with the posterior cortex to contextualize this input/output mapping. === PFC === The PFC (for output gating) has a localist one-to-one representation of the input units for every stripe. Thus, you can look at these PFC representations and see directly what the network is maintaining. The PFC maintains the working memory needed to perform the task. === Striatum === This is the dynamic gating system representing the striatum units of the basal ganglia. Every even-index unit within a stripe represents "Go", while the odd-index units represent "NoGo." The Go units cause updating of the PFC, while the NoGo units cause the PFC to maintain its existing memory representation. There are groups of units for every stripe. In the PBWM model in Emergent, the matrices represent the striatum. === PVLV === All of these layers are part of PVLV system. The PVLV system controls the dopaminergic modulation of the basal ganglia (BG). Thus, BG/PVLV form an actor-critic architecture where the PVLV system learns when to update. ==== SNrThal ==== SNrThal represents the substantia nigra pars reticulata (SNr) and the associated area of the thalamus, which produce a competition among the Go/NoGo units within a given stripe and mediates competition using k-winners-take-all dynamics. If there is more overall Go activity in a given stripe, then the associated SNrThal unit gets activated, and it drives updating in PFC. For every stripe, there is one unit in SNrThal. ==== VTA and SNc ==== Ventral tegmental area (VTA) and substantia nigra pars compacta (SNc) are part of the dopamine layer. This layer models midbrain dopamine neurons. They control the dopaminergic modulation of the basal ganglia.

  Read more →
• 

  Expectation–maximization algorithm

  In statistics, an expectation–maximization (EM) algorithm is an iterative method to find (local) maximum likelihood or maximum a posteriori (MAP) estimates of parameters in statistical models, where the model depends on unobserved latent variables. The EM iteration alternates between performing an expectation (E) step, which creates a function for the expectation of the log-likelihood evaluated using the current estimate for the parameters, and a maximization (M) step, which computes parameters maximizing the expected log-likelihood found on the E step. These parameter-estimates are then used to determine the distribution of the latent variables in the next E step. It can be used, for example, to estimate a mixture of gaussians, or to solve the multiple linear regression problem. == History == The EM algorithm was explained and given its name in a classic 1977 paper by Arthur Dempster, Nan Laird, and Donald Rubin. They pointed out that the method had been "proposed many times in special circumstances" by earlier authors. One of the earliest is the gene-counting method for estimating allele frequencies by Cedric Smith. Another was proposed by H.O. Hartley in 1958, and Hartley and Hocking in 1977, from which many of the ideas in the Dempster–Laird–Rubin paper originated. Another one by S.K Ng, Thriyambakam Krishnan and G.J McLachlan in 1977. Hartley's ideas can be broadened to any grouped discrete distribution. A very detailed treatment of the EM method for exponential families was published by Rolf Sundberg in his thesis and several papers, following his collaboration with Per Martin-Löf and Anders Martin-Löf. The Dempster–Laird–Rubin paper in 1977 generalized the method and sketched a convergence analysis for a wider class of problems. The Dempster–Laird–Rubin paper established the EM method as an important tool of statistical analysis. See also Meng and van Dyk (1997). The convergence analysis of the Dempster–Laird–Rubin algorithm was flawed and a correct convergence analysis was published by C. F. Jeff Wu in 1983. Wu's proof established the EM method's convergence also outside of the exponential family, as claimed by Dempster–Laird–Rubin. == Introduction == The EM algorithm is used to find (local) maximum likelihood parameters of a statistical model in cases where the equations cannot be solved directly. Typically these models involve latent variables in addition to unknown parameters and known data observations. That is, either missing values exist among the data, or the model can be formulated more simply by assuming the existence of further unobserved data points. For example, a mixture model can be described more simply by assuming that each observed data point has a corresponding unobserved data point, or latent variable, specifying the mixture component to which each data point belongs. Finding a maximum likelihood solution typically requires taking the derivatives of the likelihood function with respect to all the unknown values, the parameters and the latent variables, and simultaneously solving the resulting equations. In statistical models with latent variables, this is usually impossible. Instead, the result is typically a set of interlocking equations in which the solution to the parameters requires the values of the latent variables and vice versa, but substituting one set of equations into the other produces an unsolvable equation. The EM algorithm proceeds from the observation that there is a way to solve these two sets of equations numerically. One can simply pick arbitrary values for one of the two sets of unknowns, use them to estimate the second set, then use these new values to find a better estimate of the first set, and then keep alternating between the two until the resulting values both converge to fixed points. It's not obvious that this will work, but it can be proven in this context. Additionally, it can be proven that the derivative of the likelihood is (arbitrarily close to) zero at that point, which in turn means that the point is either a local maximum or a saddle point. In general, multiple maxima may occur, with no guarantee that the global maximum will be found. Some likelihoods also have singularities in them, i.e., nonsensical maxima. For example, one of the solutions that may be found by EM in a mixture model involves setting one of the components to have zero variance and the mean parameter for the same component to be equal to one of the data points. == Description == === The symbols === Given the statistical model which generates a set X {\displaystyle \mathbf {X} } of observed data, a set of unobserved latent data or missing values Z {\displaystyle \mathbf {Z} } , and a vector of unknown parameters θ {\displaystyle {\boldsymbol {\theta }}} , along with a likelihood function L ( θ ; X , Z ) = p ( X , Z ∣ θ ) {\displaystyle L({\boldsymbol {\theta }};\mathbf {X} ,\mathbf {Z} )=p(\mathbf {X} ,\mathbf {Z} \mid {\boldsymbol {\theta }})} , the maximum likelihood estimate (MLE) of the unknown parameters is determined by maximizing the marginal likelihood of the observed data L ( θ ; X ) = p ( X ∣ θ ) = ∫ p ( X , Z ∣ θ ) d Z = ∫ p ( X ∣ Z , θ ) p ( Z ∣ θ ) d Z {\displaystyle {\begin{aligned}L({\boldsymbol {\theta }};\mathbf {X} )=p(\mathbf {X} \mid {\boldsymbol {\theta }})&=\int p(\mathbf {X} ,\mathbf {Z} \mid {\boldsymbol {\theta }})\,d\mathbf {Z} \\&=\int p(\mathbf {X} \mid \mathbf {Z} ,{\boldsymbol {\theta }})p(\mathbf {Z} \mid {\boldsymbol {\theta }})\,d\mathbf {Z} \end{aligned}}} However, this quantity is often intractable since Z {\displaystyle \mathbf {Z} } is unobserved and the distribution of Z {\displaystyle \mathbf {Z} } is unknown before attaining θ {\displaystyle {\boldsymbol {\theta }}} . === The EM algorithm === The EM algorithm seeks to find the maximum likelihood estimate of the marginal likelihood by iteratively applying these two steps: More succinctly, we can write it as one equation: θ ( t + 1 ) = arg ⁡ max θ ⁡ E Z ∼ p ( ⋅ | X , θ ( t ) ) ⁡ [ log ⁡ p ( X , Z | θ ) ] {\displaystyle {\boldsymbol {\theta }}^{(t+1)}=\mathop {\arg \max } _{\boldsymbol {\theta }}\operatorname {E} _{\mathbf {Z} \sim p(\cdot |\mathbf {X} ,{\boldsymbol {\theta }}^{(t)})}\left[\log p(\mathbf {X} ,\mathbf {Z} |{\boldsymbol {\theta }})\right]\,} === Interpretation of the variables === The typical models to which EM is applied use Z {\displaystyle \mathbf {Z} } as a latent variable indicating membership in one of a set of groups: The observed data points X {\displaystyle \mathbf {X} } may be discrete (taking values in a finite or countably infinite set) or continuous (taking values in an uncountably infinite set). Associated with each data point may be a vector of observations. The missing values (aka latent variables) Z {\displaystyle \mathbf {Z} } are discrete, drawn from a fixed number of values, and with one latent variable per observed unit. The parameters are continuous, and are of two kinds: Parameters that are associated with all data points, and those associated with a specific value of a latent variable (i.e., associated with all data points whose corresponding latent variable has that value). However, it is possible to apply EM to other sorts of models. The motivation is as follows. If the value of the parameters θ {\displaystyle {\boldsymbol {\theta }}} is known, usually the value of the latent variables Z {\displaystyle \mathbf {Z} } can be found by maximizing the log-likelihood over all possible values of Z {\displaystyle \mathbf {Z} } , either simply by iterating over Z {\displaystyle \mathbf {Z} } or through an algorithm such as the Viterbi algorithm for hidden Markov models. Conversely, if we know the value of the latent variables Z {\displaystyle \mathbf {Z} } , we can find an estimate of the parameters θ {\displaystyle {\boldsymbol {\theta }}} fairly easily, typically by simply grouping the observed data points according to the value of the associated latent variable and averaging the values, or some function of the values, of the points in each group. This suggests an iterative algorithm, in the case where both θ {\displaystyle {\boldsymbol {\theta }}} and Z {\displaystyle \mathbf {Z} } are unknown: First, initialize the parameters θ {\displaystyle {\boldsymbol {\theta }}} to some random values. Compute the probability of each possible value of ⁠ Z {\displaystyle \mathbf {Z} } ⁠, given ⁠ θ {\displaystyle {\boldsymbol {\theta }}} ⁠. Then, use the just-computed values of Z {\displaystyle \mathbf {Z} } to compute a better estimate for the parameters ⁠ θ {\displaystyle {\boldsymbol {\theta }}} ⁠. Iterate steps 2 and 3 until convergence. The algorithm as just described monotonically approaches a local minimum of the cost function. == Properties == Although an EM iteration does increase the observed data (i.e., marginal) likelihood function, no guarantee exists that the sequence converges to a maximum likelihood estimator. For multimodal distributions, this means that an EM algorithm may co

  Read more →
• 

  Object model

  In computing, object model has two related but distinct meanings: The properties of objects in general in a specific computer programming language, technology, notation or methodology that uses them. Examples are the object models of Java, the Component Object Model (COM), or Object-Modeling Technique (OMT). Such object models are usually defined using concepts such as class, generic function, message, inheritance, polymorphism, and encapsulation. There is an extensive literature on formalized object models as a subset of the formal semantics of programming languages. A collection of objects or classes through which a program can examine and manipulate some specific parts of its world. In other words, the object-oriented interface to some service or system. Such an interface is said to be the object model of the represented service or system. For example, the Document Object Model (DOM) is a collection of objects that represent a page in a web browser, used by script programs to examine and dynamically change the page. There is a Microsoft Excel object model [1] for controlling Microsoft Excel from another program, and the ASCOM Telescope Driver is an object model for controlling an astronomical telescope. == Features == An object model consists of the following important features: === Object reference === Objects can be accessed via object references. To invoke a method in an object, the object reference and method name are given, together with any arguments. === Interfaces === An interface provides a definition of the signature of a set of methods without specifying their implementation. An object will provide a particular interface if its class contains code that implement the method of that interface. An interface also defines types that can be used to declare the type of variables or parameters and return values of methods. === Actions === An action in object-oriented programming (OOP) is initiated by an object invoking a method in another object. An invocation can include additional information needed to carry out the method. The receiver executes the appropriate method and then returns control to the invoking object, sometimes supplying a result. === Exceptions === Programs can encounter various errors and unexpected conditions of varying seriousness. During the execution of the method many different problems may be discovered. Exceptions provide a clean way to deal with error conditions without complicating the code. A block of code may be defined to throw an exception whenever particular unexpected conditions or errors arise. This means that control passes to another block of code that catches the exception.

  Read more →
• 

  Neocognitron

  The neocognitron is a hierarchical, multilayered artificial neural network proposed by Kunihiko Fukushima in 1979. It has been used for Japanese handwritten character recognition and other pattern recognition tasks, and served as the inspiration for convolutional neural networks. Previously in 1969, he published a similar architecture, but with hand-designed kernels inspired by convolutions in mammalian vision. In 1975 he improved it to the Cognitron, and in 1979 he improved it to the neocognitron, which learns all convolutional kernels by unsupervised learning (in his terminology, "self-organized by 'learning without a teacher'"). The neocognitron was inspired by the model proposed by Hubel & Wiesel in 1959. They found two types of cells in the visual primary cortex called simple cell and complex cell, and also proposed a cascading model of these two types of cells for use in pattern recognition tasks. The neocognitron is a natural extension of these cascading models. The neocognitron consists of multiple types of cells, the most important of which are called S-cells and C-cells. The local features are extracted by S-cells, and these features' deformation, such as local shifts, are tolerated by C-cells. Local features in the input are integrated gradually and classified in the higher layers. The idea of local feature integration is found in several other models, such as the Convolutional Neural Network model, the SIFT method, and the HoG method. There are various kinds of neocognitron. For example, some types of neocognitron can detect multiple patterns in the same input by using backward signals to achieve selective attention.

  Read more →
• 

  ImageNets

  ImageNets is an open source framework for rapid prototyping of machine vision algorithms, developed by the Institute of Automation. == Description == ImageNets is an open source and platform independent (Windows & Linux) framework for rapid prototyping of machine vision algorithms. With the GUI ImageNet Designer, no programming knowledge is required to perform operations on images. A configured ImageNet can be loaded and executed from C++ code without the need for loading the ImageNet Designer GUI to achieve higher execution performance. == History == ImageNets was developed by the Institute of Automation, University of Bremen, Germany. The software was first publicly released in 2010. Originally, ImageNets was developed for the Care-Providing Robot FRIEND but it can be used for a wide range of computer vision applications.

  Read more →
• 

  Farthest-first traversal

  In computational geometry, the farthest-first traversal of a compact metric space is a sequence of points in the space, where the first point is selected arbitrarily and each successive point is as far as possible from the set of previously-selected points. The same concept can also be applied to a finite set of geometric points, by restricting the selected points to belong to the set or equivalently by considering the finite metric space generated by these points. For a finite metric space or finite set of geometric points, the resulting sequence forms a permutation of the points, also known as the greedy permutation. Every prefix of a farthest-first traversal provides a set of points that is widely spaced and close to all remaining points. More precisely, no other set of equally many points can be spaced more than twice as widely, and no other set of equally many points can be less than half as far to its farthest remaining point. In part because of these properties, farthest-point traversals have many applications, including the approximation of the traveling salesman problem and the metric k-center problem. They may be constructed in polynomial time, or (for low-dimensional Euclidean spaces) approximated in near-linear time. == Definition and properties == A farthest-first traversal is a sequence of points in a compact metric space, with each point appearing at most once. If the space is finite, each point appears exactly once, and the traversal is a permutation of all of the points in the space. The first point of the sequence may be any point in the space. Each point p after the first must have the maximum possible distance to the set of points earlier than p in the sequence, where the distance from a point to a set is defined as the minimum of the pairwise distances to points in the set. A given space may have many different farthest-first traversals, depending both on the choice of the first point in the sequence (which may be any point in the space) and on ties for the maximum distance among later choices. Farthest-point traversals may be characterized by the following properties. Fix a number k, and consider the prefix formed by the first k points of the farthest-first traversal of any metric space. Let r be the distance between the final point of the prefix and the other points in the prefix. Then this subset has the following two properties: All pairs of the selected points are at distance at least r from each other, and All points of the metric space are at distance at most r from the subset. Conversely any sequence having these properties, for all choices of k, must be a farthest-first traversal. These are the two defining properties of a Delone set, so each prefix of the farthest-first traversal forms a Delone set. == Applications == Rosenkrantz, Stearns & Lewis (1977) used the farthest-first traversal to define the farthest-insertion heuristic for the travelling salesman problem. This heuristic finds approximate solutions to the travelling salesman problem by building up a tour on a subset of points, adding one point at a time to the tour in the ordering given by a farthest-first traversal. To add each point to the tour, one edge of the previous tour is broken and replaced by a pair of edges through the added point, in the cheapest possible way. Although Rosenkrantz et al. prove only a logarithmic approximation ratio for this method, they show that in practice it often works better than other insertion methods with better provable approximation ratios. Later, the same sequence of points was popularized by Gonzalez (1985), who used it as part of greedy approximation algorithms for two problems in clustering, in which the goal is to partition a set of points into k clusters. One of the two problems that Gonzalez solve in this way seeks to minimize the maximum diameter of a cluster, while the other, known as the metric k-center problem, seeks to minimize the maximum radius, the distance from a chosen central point of a cluster to the farthest point from it in the same cluster. For instance, the k-center problem can be used to model the placement of fire stations within a city, in order to ensure that every address within the city can be reached quickly by a fire truck. For both clustering problems, Gonzalez chooses a set of k cluster centers by selecting the first k points of a farthest-first traversal, and then creates clusters by assigning each input point to the nearest cluster center. If r is the distance from the set of k selected centers to the next point at position k + 1 in the traversal, then with this clustering every point is within distance r of its center and every cluster has diameter at most 2r. However, the subset of k centers together with the next point are all at distance at least r from each other, and any k-clustering would put some two of these points into a single cluster, with one of them at distance at least r/2 from its center and with diameter at least r. Thus, Gonzalez's heuristic gives an approximation ratio of 2 for both clustering problems. Gonzalez's heuristic was independently rediscovered for the metric k-center problem by Dyer & Frieze (1985), who applied it more generally to weighted k-center problems. Another paper on the k-center problem from the same time, Hochbaum & Shmoys (1985), achieves the same approximation ratio of 2, but its techniques are different. Nevertheless, Gonzalez's heuristic, and the name "farthest-first traversal", are often incorrectly attributed to Hochbaum and Shmoys. For both the min-max diameter clustering problem and the metric k-center problem, these approximations are optimal: the existence of a polynomial-time heuristic with any constant approximation ratio less than 2 would imply that P = NP. As well as for clustering, the farthest-first traversal can also be used in another type of facility location problem, the max-min facility dispersion problem, in which the goal is to choose the locations of k different facilities so that they are as far apart from each other as possible. More precisely, the goal in this problem is to choose k points from a given metric space or a given set of candidate points, in such a way as to maximize the minimum pairwise distance between the selected points. Again, this can be approximated by choosing the first k points of a farthest-first traversal. If r denotes the distance of the kth point from all previous points, then every point of the metric space or the candidate set is within distance r of the first k − 1 points. By the pigeonhole principle, some two points of the optimal solution (whatever it is) must both be within distance r of the same point among these first k − 1 chosen points, and (by the triangle inequality) within distance 2r of each other. Therefore, the heuristic solution given by the farthest-first traversal is within a factor of two of optimal. Other applications of the farthest-first traversal include color quantization (clustering the colors in an image to a smaller set of representative colors), progressive scanning of images (choosing an order to display the pixels of an image so that prefixes of the ordering produce good lower-resolution versions of the whole image rather than filling in the image from top to bottom), point selection in the probabilistic roadmap method for motion planning, simplification of point clouds, generating masks for halftone images, hierarchical clustering, finding the similarities between polygon meshes of similar surfaces, choosing diverse and high-value observation targets for underwater robot exploration, fault detection in sensor networks, modeling phylogenetic diversity, matching vehicles in a heterogenous fleet to customer delivery requests, uniform distribution of geodetic observatories on the Earth's surface or of other types of sensor network, generation of virtual point lights in the instant radiosity computer graphics rendering method, and geometric range searching data structures. == Algorithms == === Greedy exact algorithm === The farthest-first traversal of a finite point set may be computed by a greedy algorithm that maintains the distance of each point from the previously selected points, performing the following steps: Initialize the sequence of selected points to the empty sequence, and the distances of each point to the selected points to infinity. While not all points have been selected, repeat the following steps: Scan the list of not-yet-selected points to find a point p that has the maximum distance from the selected points. Remove p from the not-yet-selected points and add it to the end of the sequence of selected points. For each remaining not-yet-selected point q, replace the distance stored for q by the minimum of its old value and the distance from p to q. For a set of n points, this algorithm takes O(n2) steps and O(n2) distance computations. === Approximations === A faster approximation algorithm, given by Har-Peled & Mendel (2006), applie

  Read more →
• 

  Cross-entropy method

  The cross-entropy (CE) method is a Monte Carlo method for importance sampling and optimization. It is applicable to both combinatorial and continuous problems, with either a static or noisy objective. The method approximates the optimal importance sampling estimator by repeating two phases: Draw a sample from a probability distribution. Minimize the cross-entropy between this distribution and a target distribution to produce a better sample in the next iteration. Reuven Rubinstein developed the method in the context of rare-event simulation, where tiny probabilities must be estimated, for example in network reliability analysis, queueing models, or performance analysis of telecommunication systems. The method has also been applied to the traveling salesman, quadratic assignment, DNA sequence alignment, max-cut and buffer allocation problems. == Estimation via importance sampling == Consider the general problem of estimating the quantity ℓ = E u [ H ( X ) ] = ∫ H ( x ) f ( x ; u ) d x {\displaystyle \ell =\mathbb {E} _{\mathbf {u} }[H(\mathbf {X} )]=\int H(\mathbf {x} )\,f(\mathbf {x} ;\mathbf {u} )\,{\textrm {d}}\mathbf {x} } , where H {\displaystyle H} is some performance function and f ( x ; u ) {\displaystyle f(\mathbf {x} ;\mathbf {u} )} is a member of some parametric family of distributions. Using importance sampling this quantity can be estimated as ℓ ^ = 1 N ∑ i = 1 N H ( X i ) f ( X i ; u ) g ( X i ) {\displaystyle {\hat {\ell }}={\frac {1}{N}}\sum _{i=1}^{N}H(\mathbf {X} _{i}){\frac {f(\mathbf {X} _{i};\mathbf {u} )}{g(\mathbf {X} _{i})}}} , where X 1 , … , X N {\displaystyle \mathbf {X} _{1},\dots ,\mathbf {X} _{N}} is a random sample from g {\displaystyle g\,} . For positive H {\displaystyle H} , the theoretically optimal importance sampling density (PDF) is given by g ∗ ( x ) = H ( x ) f ( x ; u ) / ℓ {\displaystyle g^{}(\mathbf {x} )=H(\mathbf {x} )f(\mathbf {x} ;\mathbf {u} )/\ell } . This, however, depends on the unknown ℓ {\displaystyle \ell } . The CE method aims to approximate the optimal PDF by adaptively selecting members of the parametric family that are closest (in the Kullback–Leibler sense) to the optimal PDF g ∗ {\displaystyle g^{}} . == Generic CE algorithm == Choose initial parameter vector v ( 0 ) {\displaystyle \mathbf {v} ^{(0)}} ; set t = 1. Generate a random sample X 1 , … , X N {\displaystyle \mathbf {X} _{1},\dots ,\mathbf {X} _{N}} from f ( ⋅ ; v ( t − 1 ) ) {\displaystyle f(\cdot ;\mathbf {v} ^{(t-1)})} Solve for v ( t ) {\displaystyle \mathbf {v} ^{(t)}} , where v ( t ) = argmax v ⁡ 1 N ∑ i = 1 N H ( X i ) f ( X i ; u ) f ( X i ; v ( t − 1 ) ) log ⁡ f ( X i ; v ) {\displaystyle \mathbf {v} ^{(t)}=\mathop {\textrm {argmax}} _{\mathbf {v} }{\frac {1}{N}}\sum _{i=1}^{N}H(\mathbf {X} _{i}){\frac {f(\mathbf {X} _{i};\mathbf {u} )}{f(\mathbf {X} _{i};\mathbf {v} ^{(t-1)})}}\log f(\mathbf {X} _{i};\mathbf {v} )} If convergence is reached then stop; otherwise, increase t by 1 and reiterate from step 2. In several cases, the solution to step 3 can be found analytically. Situations in which this occurs are When f {\displaystyle f\,} belongs to the natural exponential family When f {\displaystyle f\,} is discrete with finite support When H ( X ) = I { x ∈ A } {\displaystyle H(\mathbf {X} )=\mathrm {I} _{\{\mathbf {x} \in A\}}} and f ( X i ; u ) = f ( X i ; v ( t − 1 ) ) {\displaystyle f(\mathbf {X} _{i};\mathbf {u} )=f(\mathbf {X} _{i};\mathbf {v} ^{(t-1)})} , then v ( t ) {\displaystyle \mathbf {v} ^{(t)}} corresponds to the maximum likelihood estimator based on those X k ∈ A {\displaystyle \mathbf {X} _{k}\in A} . == Continuous optimization—example == The same CE algorithm can be used for optimization, rather than estimation. Suppose the problem is to maximize some function S {\displaystyle S} , for example, S ( x ) = e − ( x − 2 ) 2 + 0.8 e − ( x + 2 ) 2 {\displaystyle S(x)={\textrm {e}}^{-(x-2)^{2}}+0.8\,{\textrm {e}}^{-(x+2)^{2}}} . To apply CE, one considers first the associated stochastic problem of estimating P θ ( S ( X ) ≥ γ ) {\displaystyle \mathbb {P} _{\boldsymbol {\theta }}(S(X)\geq \gamma )} for a given level γ {\displaystyle \gamma \,} , and parametric family { f ( ⋅ ; θ ) } {\displaystyle \left\{f(\cdot ;{\boldsymbol {\theta }})\right\}} , for example the 1-dimensional Gaussian distribution, parameterized by its mean μ t {\displaystyle \mu _{t}\,} and variance σ t 2 {\displaystyle \sigma _{t}^{2}} (so θ = ( μ , σ 2 ) {\displaystyle {\boldsymbol {\theta }}=(\mu ,\sigma ^{2})} here). Hence, for a given γ {\displaystyle \gamma \,} , the goal is to find θ {\displaystyle {\boldsymbol {\theta }}} so that D K L ( I { S ( x ) ≥ γ } ‖ f θ ) {\displaystyle D_{\mathrm {KL} }({\textrm {I}}_{\{S(x)\geq \gamma \}}\|f_{\boldsymbol {\theta }})} is minimized. This is done by solving the sample version (stochastic counterpart) of the KL divergence minimization problem, as in step 3 above. It turns out that parameters that minimize the stochastic counterpart for this choice of target distribution and parametric family are the sample mean and sample variance corresponding to the elite samples, which are those samples that have objective function value ≥ γ {\displaystyle \geq \gamma } . The worst of the elite samples is then used as the level parameter for the next iteration. This yields the following randomized algorithm that happens to coincide with the so-called Estimation of Multivariate Normal Algorithm (EMNA), an estimation of distribution algorithm. === Pseudocode === // Initialize parameters μ := −6 σ2 := 100 t := 0 maxits := 100 N := 100 Ne := 10 // While maxits not exceeded and not converged while t < maxits and σ2 > ε do // Obtain N samples from current sampling distribution X := SampleGaussian(μ, σ2, N) // Evaluate objective function at sampled points S := exp(−(X − 2) ^ 2) + 0.8 exp(−(X + 2) ^ 2) // Sort X by objective function values in descending order X := sort(X, S) // Update parameters of sampling distribution via elite samples μ := mean(X(1:Ne)) σ2 := var(X(1:Ne)) t := t + 1 // Return mean of final sampling distribution as solution return μ == Related methods == Simulated annealing Genetic algorithms Harmony search Estimation of distribution algorithm Tabu search Natural Evolution Strategy Ant colony optimization algorithms

  Read more →
• 

  Information gain ratio

  In decision tree learning, information gain ratio is a ratio of information gain to the intrinsic information. It was proposed by Ross Quinlan, to reduce a bias towards multi-valued attributes by taking the number and size of branches into account when choosing an attribute. Information gain is also known as mutual information. == Information gain calculation == Information gain is the reduction in entropy produced from partitioning a set with attributes a {\displaystyle a} and finding the optimal candidate that produces the highest value: IG ( T , a ) = H ( T ) − H ( T | a ) , {\displaystyle {\text{IG}}(T,a)=\mathrm {H} {(T)}-\mathrm {H} {(T|a)},} where T {\displaystyle T} is a random variable and H ( T | a ) {\displaystyle \mathrm {H} {(T|a)}} is the entropy of T {\displaystyle T} given the value of attribute a {\displaystyle a} . The information gain is equal to the total entropy for an attribute if for each of the attribute values a unique classification can be made for the result attribute. In this case the relative entropies subtracted from the total entropy are 0. == Split information calculation == The split information value for a test is defined as follows: SplitInformation ( X ) = − ∑ i = 1 n N ( x i ) N ( x ) ∗ log ⁡ 2 N ( x i ) N ( x ) {\displaystyle {\text{SplitInformation}}(X)=-\sum _{i=1}^{n}{{\frac {\mathrm {N} (x_{i})}{\mathrm {N} (x)}}\log {_{2}}{\frac {\mathrm {N} (x_{i})}{\mathrm {N} (x)}}}} where X {\displaystyle X} is a discrete random variable with possible values x 1 , x 2 , . . . , x i {\displaystyle {x_{1},x_{2},...,x_{i}}} and N ( x i ) {\displaystyle N(x_{i})} being the number of times that x i {\displaystyle x_{i}} occurs divided by the total count of events N ( x ) {\displaystyle N(x)} where x {\displaystyle x} is the set of events. The split information value is a positive number that describes the potential worth of splitting a branch from a node. This in turn is the intrinsic value that the random variable possesses and will be used to remove the bias in the information gain ratio calculation. == Information gain ratio calculation == The information gain ratio is the ratio between the information gain and the split information value: IGR ( T , a ) = IG ( T , a ) / SplitInformation ( T ) {\displaystyle {\text{IGR}}(T,a)={\text{IG}}(T,a)/{\text{SplitInformation}}(T)} IGR ( T , a ) = − ∑ i = 1 n P ( T ) log ⁡ P ( T ) − ( − ∑ i = 1 n P ( T | a ) log ⁡ P ( T | a ) ) − ∑ i = 1 n N ( t i ) N ( t ) ∗ log ⁡ 2 N ( t i ) N ( t ) {\displaystyle {\text{IGR}}(T,a)={\frac {-\sum _{i=1}^{n}{\mathrm {P} (T)\log \mathrm {P} (T)}-(-\sum _{i=1}^{n}{\mathrm {P} (T|a)\log \mathrm {P} (T|a)})}{-\sum _{i=1}^{n}{{\frac {\mathrm {N} (t_{i})}{\mathrm {N} (t)}}\log {_{2}}{\frac {\mathrm {N} (t_{i})}{\mathrm {N} (t)}}}}}} == Example == Using weather data published by Fordham University, the table was created below: Using the table above, one can find the entropy, information gain, split information, and information gain ratio for each variable (outlook, temperature, humidity, and wind). These calculations are shown in the tables below: Using the above tables, one can deduce that Outlook has the highest information gain ratio. Next, one must find the statistics for the sub-groups of the Outlook variable (sunny, overcast, and rainy), for this example one will only build the sunny branch (as shown in the table below): One can find the following statistics for the other variables (temperature, humidity, and wind) to see which have the greatest effect on the sunny element of the outlook variable: Humidity was found to have the highest information gain ratio. One will repeat the same steps as before and find the statistics for the events of the Humidity variable (high and normal): Since the play values are either all "No" or "Yes", the information gain ratio value will be equal to 1. Also, now that one has reached the end of the variable chain with Wind being the last variable left, they can build an entire root to leaf node branch line of a decision tree. Once finished with reaching this leaf node, one would follow the same procedure for the rest of the elements that have yet to be split in the decision tree. This set of data was relatively small, however, if a larger set was used, the advantages of using the information gain ratio as the splitting factor of a decision tree can be seen more. == Advantages == Information gain ratio biases the decision tree against considering attributes with a large number of distinct values. For example, suppose that we are building a decision tree for some data describing a business's customers. Information gain ratio is used to decide which of the attributes are the most relevant. These will be tested near the root of the tree. One of the input attributes might be the customer's telephone number. This attribute has a high information gain, because it uniquely identifies each customer. Due to its high amount of distinct values, this will not be chosen to be tested near the root. == Disadvantages == Although information gain ratio solves the key problem of information gain, it creates another problem. If one is considering an amount of attributes that have a high number of distinct values, these will never be above one that has a lower number of distinct values. == Difference from information gain == Information gain's shortcoming is created by not providing a numerical difference between attributes with high distinct values from those that have less. Example: Suppose that we are building a decision tree for some data describing a business's customers. Information gain is often used to decide which of the attributes are the most relevant, so they can be tested near the root of the tree. One of the input attributes might be the customer's credit card number. This attribute has a high information gain, because it uniquely identifies each customer, but we do not want to include it in the decision tree: deciding how to treat a customer based on their credit card number is unlikely to generalize to customers we haven't seen before. Information gain ratio's strength is that it has a bias towards the attributes with the lower number of distinct values. Below is a table describing the differences of information gain and information gain ratio when put in certain scenarios.

  Read more →
• 

  Dispersive flies optimisation

  Dispersive flies optimisation (DFO) is a bare-bones swarm intelligence algorithm which is inspired by the swarming behaviour of flies hovering over food sources. DFO is a simple optimiser which works by iteratively trying to improve a candidate solution with regard to a numerical measure that is calculated by a fitness function. Each member of the population, a fly or an agent, holds a candidate solution whose suitability can be evaluated by their fitness value. Optimisation problems are often formulated as either minimisation or maximisation problems. DFO was introduced with the intention of analysing a simplified swarm intelligence algorithm with the fewest tunable parameters and components. In the first work on DFO, this algorithm was compared against a few other existing swarm intelligence techniques using error, efficiency and diversity measures. It is shown that despite the simplicity of the algorithm, which only uses agents’ position vectors at time t to generate the position vectors for time t + 1, it exhibits a competitive performance. Since its inception, DFO has been used in a variety of applications including medical imaging and image analysis as well as data mining and machine learning. == Algorithm == DFO bears many similarities with other existing continuous, population-based optimisers (e.g. particle swarm optimization and differential evolution). In that, the swarming behaviour of the individuals consists of two tightly connected mechanisms, one is the formation of the swarm and the other is its breaking or weakening. DFO works by facilitating the information exchange between the members of the population (the swarming flies). Each fly x {\displaystyle \mathbf {x} } represents a position in a d-dimensional search space: x = ( x 1 , x 2 , … , x d ) {\displaystyle \mathbf {x} =(x_{1},x_{2},\ldots ,x_{d})} , and the fitness of each fly is calculated by the fitness function f ( x ) {\displaystyle f(\mathbf {x} )} , which takes into account the flies' d dimensions: f ( x ) = f ( x 1 , x 2 , … , x d ) {\displaystyle f(\mathbf {x} )=f(x_{1},x_{2},\ldots ,x_{d})} . The pseudocode below represents one iteration of the algorithm: for i = 1 : N flies x i . fitness = f ( x i ) {\displaystyle \mathbf {x_{i}} .{\text{fitness}}=f(\mathbf {x} _{i})} end for i x s {\displaystyle \mathbf {x} _{s}} = arg min [ f ( x i ) ] , i ∈ { 1 , … , N } {\textstyle [f(\mathbf {x} _{i})],\;i\in \{1,\ldots ,N\}} for i = 1 : N and i ≠ s {\displaystyle i\neq s} for d = 1 : D dimensions if U ( 0 , 1 ) < Δ {\displaystyle U(0,1)<\Delta } x i d t + 1 = U ( x min , d , x max , d ) {\displaystyle x_{id}^{t+1}=U(x_{\min ,d},x_{\max ,d})} else x i d t + 1 = x i n d t + U ( 0 , 1 ) ( x s d t − x i d t ) {\displaystyle x_{id}^{t+1}=x_{i_{nd}}^{t}+U(0,1)(x_{sd}^{t}-x_{id}^{t})} end if end for d end for i In the algorithm above, x i d t + 1 {\displaystyle x_{id}^{t+1}} represents fly i {\displaystyle i} at dimension d {\displaystyle d} and time t + 1 {\displaystyle t+1} ; x i n d t {\displaystyle x_{i_{nd}}^{t}} presents x i {\displaystyle x_{i}} 's best neighbouring fly in ring topology (left or right, using flies indexes), at dimension d {\displaystyle d} and time t {\displaystyle t} ; and x s d t {\displaystyle x_{sd}^{t}} is the swarm's best fly. Using this update equation, the swarm's population update depends on each fly's best neighbour (which is used as the focus μ {\displaystyle \mu } , and the difference between the current fly and the best in swarm represents the spread of movement, σ {\displaystyle \sigma } ). Other than the population size N {\displaystyle N} , the only tunable parameter is the disturbance threshold Δ {\displaystyle \Delta } , which controls the dimension-wise restart in each fly vector. This mechanism is proposed to control the diversity of the swarm. Other notable minimalist swarm algorithm is Bare bones particle swarms (BB-PSO), which is based on particle swarm optimisation, along with bare bones differential evolution (BBDE) which is a hybrid of the bare bones particle swarm optimiser and differential evolution, aiming to reduce the number of parameters. Alhakbani in her PhD thesis covers many aspects of the algorithms including several DFO applications in feature selection as well as parameter tuning. == Applications == Some of the recent applications of DFO are listed below: Optimising support vector machine kernel to classify imbalanced data Quantifying symmetrical complexity in computational aesthetics Analysing computational autopoiesis and computational creativity Identifying calcifications in medical images Building non-identical organic structures for game's space development Deep Neuroevolution: Training Deep Neural Networks for False Alarm Detection in Intensive Care Units Identification of animation key points from 2D-medialness maps

  Read more →