AI Chatbot Meme

AI Chatbot Meme — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

• 

  Jaggies

  Jaggies are visual artifacts in raster images, most frequently from aliasing, which in turn is often caused by non-linear mixing effects producing high-frequency components, or missing or poor anti-aliasing filtering prior to sampling. Jaggies are stair-like lines that appear where there should be "smooth" straight lines or curves. For example, when a nominally straight, un-aliased line steps across one pixel either horizontally or vertically, a "dogleg" occurs halfway through the line, where it crosses the threshold from one pixel to the other. Jaggies should not be confused with most compression artifacts, which are a different phenomenon. == Causes == Jaggies occur due to the "staircase effect". This is because a line represented in raster mode is approximated by a sequence of pixels. Jaggies can occur for a variety of reasons, the most common being that the output device (display monitor or printer) does not have sufficient resolution to portray a smooth line. In addition, jaggies often occur when a bit-mapped image is scaled to a higher resolution. This is one of the advantages that vector graphics have over bitmapped graphics – a vector image can be losslessly scaled to any arbitrary resolution or stretched infinitely in either axis without introducing jaggies. == Solutions == The effect of jaggies can be reduced by a graphics technique known as spatial anti-aliasing. Anti-aliasing smooths out jagged lines by surrounding them with transparent pixels to simulate the appearance of fractionally-filled pixels when viewed at a distance. The downside of anti-aliasing is that it reduces contrast – rather than sharp black/white transitions, there are shades of gray – and the resulting image can appear fuzzy. This is an inescapable trade-off: if the resolution is insufficient to display the desired detail, the output will either be jagged, fuzzy, or some combination thereof. While machine learning-based upscaling techniques such as DLSS can be used to infer this missing information, other types of artifacts may be introduced in the process. In real-time 3D rendering such as in video games, various anti-aliasing techniques are used to remove jaggies created by the edges of polygons and other contrasting lines. Since anti-aliasing can impose a significant performance overhead, games for home computers often allow users to choose the level and type of anti-aliasing in use in order to optimize their experience, whereas on consoles this setting is typically fixed for each title to ensure a consistent experience. While anti-aliasing is generally implemented through graphics APIs like DirectX and Vulkan, some consoles such as the Xbox 360 and PlayStation 3 are also capable of anti-aliasing to little direct performance cost by way of dedicated hardware which performs anti-aliasing on the contents of the framebuffer once it has been rendered by the GPU. Jaggies in bitmaps, such as sprites and surface materials, are most often dealt with by separate texture filtering routines, which are far easier to perform than anti-aliasing filtering. Texture filtering became ubiquitous on PCs after the introduction of 3Dfx's Voodoo GPU. == Notable uses of the term == In the 1985 game Rescue on Fractalus! for the Atari 8-bit computers, the graphics depicting the cockpit of the player's spacecraft contains two window struts, which are not anti-aliased and are therefore very "jagged". The developers made fun of this and named the in-game enemies "Jaggi", and also initially titled the game Behind Jaggi Lines!. The latter idea was scrapped by the marketing department before release.

  Read more →
• 

  External memory algorithm

  In computing, external memory algorithms or out-of-core algorithms are algorithms that are designed to process data that are too large to fit into a computer's main memory at once. Such algorithms must be optimized to efficiently fetch and access data stored in slow bulk memory (auxiliary memory) such as hard drives or tape drives, or when memory is on a computer network. External memory algorithms are analyzed in the external memory model. == Model == External memory algorithms are analyzed in an idealized model of computation called the external memory model (or I/O model, or disk access model). The external memory model is an abstract machine similar to the RAM machine model, but with a cache in addition to main memory. The model captures the fact that read and write operations are much faster in a cache than in main memory, and that reading long contiguous blocks is faster than reading randomly using a disk read-and-write head. The running time of an algorithm in the external memory model is defined by the number of reads and writes to memory required. The model was introduced by Alok Aggarwal and Jeffrey Vitter in 1988. The external memory model is related to the cache-oblivious model, but algorithms in the external memory model may know both the block size and the cache size. For this reason, the model is sometimes referred to as the cache-aware model. The model consists of a processor with an internal memory or cache of size M, connected to an unbounded external memory. Both the internal and external memory are divided into blocks of size B. One input/output or memory transfer operation consists of moving a block of B contiguous elements from external to internal memory, and the running time of an algorithm is determined by the number of these input/output operations. == Algorithms == Algorithms in the external memory model take advantage of the fact that retrieving one object from external memory retrieves an entire block of size B. This property is sometimes referred to as locality. Searching for an element among N objects is possible in the external memory model using a B-tree with branching factor B. Using a B-tree, searching, insertion, and deletion can be achieved in O ( log B ⁡ N ) {\displaystyle O(\log _{B}N)} time (in Big O notation). Information theoretically, this is the minimum running time possible for these operations, so using a B-tree is asymptotically optimal. External sorting is sorting in an external memory setting. External sorting can be done via distribution sort, which is similar to quicksort, or via a M B {\displaystyle {\tfrac {M}{B}}} -way merge sort. Both variants achieve the asymptotically optimal runtime of O ( N B log M B ⁡ N B ) {\displaystyle O\left({\frac {N}{B}}\log _{\frac {M}{B}}{\frac {N}{B}}\right)} to sort N objects. This bound also applies to the fast Fourier transform in the external memory model. The permutation problem is to rearrange N elements into a specific permutation. This can either be done either by sorting, which requires the above sorting runtime, or inserting each element in order and ignoring the benefit of locality. Thus, permutation can be done in O ( min ( N , N B log M B ⁡ N B ) ) {\displaystyle O\left(\min \left(N,{\frac {N}{B}}\log _{\frac {M}{B}}{\frac {N}{B}}\right)\right)} time. == Applications == The external memory model captures the memory hierarchy, which is not modeled in other common models used in analyzing data structures, such as the random-access machine, and is useful for proving lower bounds for data structures. The model is also useful for analyzing algorithms that work on datasets too big to fit in internal memory. A typical example is geographic information systems, especially digital elevation models, where the full data set easily exceeds several gigabytes or even terabytes of data. This methodology extends beyond general purpose CPUs and also includes GPU computing as well as classical digital signal processing. In general-purpose computing on graphics processing units (GPGPU), powerful graphics cards (GPUs) with little memory (compared with the more familiar system memory, which is most often referred to simply as RAM) are utilized with relatively slow CPU-to-GPU memory transfer (when compared with computation bandwidth). == History == An early use of the term "out-of-core" as an adjective is in 1962 in reference to devices that are other than the core memory of an IBM 360. An early use of the term "out-of-core" with respect to algorithms appears in 1971.

  Read more →
• 

  Jump-and-Walk algorithm

  Jump-and-Walk is an algorithm for point location in triangulations (though most of the theoretical analysis were performed in 2D and 3D random Delaunay triangulations). Surprisingly, the algorithm does not need any preprocessing or complex data structures except some simple representation of the triangulation itself. The predecessor of Jump-and-Walk was due to Lawson (1977) and Green and Sibson (1978), which picks a random starting point S and then walks from S toward the query point Q one triangle at a time. But no theoretical analysis was known for these predecessors until after mid-1990s. Jump-and-Walk picks a small group of sample points and starts the walk from the sample point which is the closest to Q until the simplex containing Q is found. The algorithm was a folklore in practice for some time, and the formal presentation of the algorithm and the analysis of its performance on 2D random Delaunay triangulation was done by Devroye, Mucke and Zhu in mid-1990s (the paper appeared in Algorithmica, 1998). The analysis on 3D random Delaunay triangulation was done by Mucke, Saias and Zhu (ACM Symposium of Computational Geometry, 1996). In both cases, a boundary condition was assumed, namely, Q must be slightly away from the boundary of the convex domain where the vertices of the random Delaunay triangulation are drawn. In 2004, Devroye, Lemaire and Moreau showed that in 2D the boundary condition can be withdrawn (the paper appeared in Computational Geometry: Theory and Applications, 2004). Jump-and-Walk has been used in many famous software packages, e.g., QHULL, Triangle and CGAL.

  Read more →
• 

  Algorism

  Algorism is the technique of performing basic arithmetic by writing numbers in place value form and applying a set of memorized rules and facts to the digits. One who practices algorism is known as an algorist. This positional notation system has largely superseded earlier calculation systems that used a different set of symbols for each numerical magnitude, such as Roman numerals, and in some cases required a device such as an abacus. == Etymology == The word algorism comes from the name Al-Khwārizmī (c. 780–850), a Persian mathematician, astronomer, geographer and scholar in the House of Wisdom in Baghdad, whose name means "the native of Khwarezm", which is now in modern-day Uzbekistan. He wrote a treatise in Arabic language in the 9th century, which was translated into Latin in the 12th century under the title Algoritmi de numero Indorum. This title means "Algoritmi on the numbers of the Indians", where "Algoritmi" was the translator's Latinization of Al-Khwarizmi's name. Al-Khwarizmi was the most widely read mathematician in Europe in the late Middle Ages, primarily through his other book, the Algebra. In late medieval Latin, algorismus, the corruption of his name, simply meant the "decimal number system" that is still the meaning of modern English algorism. During the 17th century, the French form for the word – but not its meaning – was changed to algorithm, following the model of the word logarithm, this form alluding to the ancient Greek arithmos = number. English adopted the French very soon afterwards, but it wasn't until the late 19th century that "algorithm" took on the meaning that it has in modern English. In English, it was first used about 1230 and then by Chaucer in 1391. Another early use of the word is from 1240, in a manual titled Carmen de Algorismo composed by Alexandre de Villedieu. It begins thus: Haec algorismus ars praesens dicitur, in qua / Talibus Indorum fruimur bis quinque figuris. which translates as: This present art, in which we use those twice five Indian figures, is called algorismus. The word algorithm also derives from algorism, a generalization of the meaning to any set of rules specifying a computational procedure. Occasionally algorism is also used in this generalized meaning, especially in older texts. == History == Starting with the integer arithmetic developed in India using base 10 notation, Al-Khwārizmī along with other mathematicians in medieval Islam, documented new arithmetic methods and made many other contributions to decimal arithmetic (see the articles linked below). These included the concept of the decimal fractions as an extension of the notation, which in turn led to the notion of the decimal point. This system was popularized in Europe by Leonardo of Pisa, now known as Fibonacci.

  Read more →
• 

  YaDICs

  YaDICs is a program written to perform digital image correlation on 2D and 3D tomographic images. The program was designed to be both modular, by its plugin strategy and efficient, by it multithreading strategy. It incorporates different transformations (Global, Elastic, Local), optimizing strategy (Gauss-Newton, Steepest descent), Global and/or local shape functions (Rigid-body motions, homogeneous dilatations, flexural and Brazilian test models)... == Theoretical background == === Context === In solid mechanics, digital image correlation is a tool that allows to identify the displacement field to register a reference image (called herein fixed image) to images during an experiment (mobile image). For example, it is possible to observe the face of a specimen with a painted speckle on it in order to determine its displacement fields during a tensile test. Before the appearance of such methods, researchers usually used strain gauges to measure the mechanical state of the material but strain gauges only measure the strain on a point and don't allow to understand material with an heterogeneous behavior. One can obtain a full in plane strain tensor by derivation of the displacement fields. Many methods are based upon the optical flow. In fluid mechanics a similar method is used, called Particle Image Velocimetry (PIV); the algorithms are similar to those of DIC but it is impossible to ensure that the optical flow is conserved so a vast majority of the software used the normalized cross correlation metric. In mechanics the displacement or velocity fields are the only concern, registering images is just a side effect. There is another process called image registration using the same algorithms (on monomodal images) but where the goal is to register images and thereby identifying the displacement field is just a side effect. YaDICs uses the general principle of image registration with a particular attention to the displacement fields basis. === Image registration principle === YaDICs can be explained using the classical image registration framework: === Image registration general scheme === The common idea of image registration and digital image correlation is to find the transformation between a fixed image and a moving one for a given metric using an optimization scheme. While there are many methods to achieve such a goal, Yadics focuses on registering images with the same modality. The idea behind the creation of this software is to be able to process data that comes from a μ-tomograph; i.e.: data cube over 10003 voxels. With such a size it is not possible to use naive approach usually used in a two-dimensional context. In order to get sufficient performances OpenMP parallelism is used and data are not globally stored in memory. As an extensive description of the different algorithms is given in. === Sampling === Contrary to image registration, Digital Image Correlation targets the transformation, one wants to extracted the most accurate transformation from the two images and not just match the images. Yadics uses the whole image as a sampling grid: it is thus a total sampling. === Interpolator === It is possible to choose between bilinear interpolation and bicubic interpolation for the grey level evaluation at non integer coordinates. The bi-cubic interpolation is the recommended one. === Metrics === ==== Sum of squared differences (SSD) ==== The SSD is also known as mean squared error. The equation below defines the SSD metric: S S D ( μ , I F , I M ) = 1 | Ω F | ∑ x i ∈ Ω F ( I F ( x i ) − I M ( T μ ( x i ) ) ) 2 , {\displaystyle SSD(\mu ,{\mathcal {I_{F}}},{\mathcal {I_{M}}})={\dfrac {1}{\left|\Omega _{F}\right|}}\sum _{x_{i}\in \Omega _{F}}\left({\mathcal {I_{F}}}(x_{i})-{\mathcal {I_{M}}}({T}_{\mu }(x_{i}))\right)^{2},} where I F {\displaystyle {\mathcal {I_{F}}}} is the fixed image, I M {\displaystyle {\mathcal {I_{M}}}} the moving one, Ω F {\displaystyle \Omega _{F}} the integration area | Ω F | {\displaystyle \left|\Omega _{F}\right|} the number of pi(vo)xels (cardinal) and T μ {\displaystyle {T}_{\mu }} the transformation parametrized by μ The transformation can be written as: T μ ( x ) = x + { Φ ( x ) } t { μ } . {\displaystyle T_{\mu }(x)=x+\left\{\Phi (x)\right\}^{t}\left\{\mu \right\}.} This metric is the main one used in the YaDICs as it works well with same modality images. One has to find the minimum of this metric ==== Normalized cross-correlation ==== The normalized cross-correlation (NCC) is used when one cannot assure the optical flow conservation; it happens in case of change of lighting or if particles disappear from the scene can occur in particle images velocimetry (PIV). The NCC is defined by: N C C ( μ , I F , I M ) = ∑ x i ∈ Ω F ( I F ( x i ) − I F ¯ ) ( I M ( T μ ( x i ) ) − I M ¯ ) ∑ x i ∈ Ω F ( I F ( x i ) − I F ¯ ) 2 ∑ x i ∈ Ω F ( I M ( T μ ( x i ) ) − I M ¯ ) 2 , {\displaystyle NCC(\mu ,{\mathcal {I_{F}}},{\mathcal {I_{M}}})={\dfrac {\sum _{x_{i}\in \Omega _{F}}\left({\mathcal {I_{F}}}(x_{i})-{\overline {\mathcal {I_{F}}}}\right)\left({\mathcal {I_{M}}}({T}_{\mu }(x_{i}))-{\overline {\mathcal {I_{M}}}}\right)}{\sqrt {\sum _{x_{i}\in \Omega _{F}}\left({\mathcal {I_{F}}}(x_{i})-{\overline {\mathcal {I_{F}}}}\right)^{2}\sum _{x_{i}\in \Omega _{F}}\left({\mathcal {I_{M}}}({T}_{\mu }(x_{i}))-{\overline {\mathcal {I_{M}}}}\right)^{2}}}},} where I F ¯ {\displaystyle {\overline {\mathcal {I_{F}}}}} and I M ¯ {\displaystyle {\overline {\mathcal {I_{M}}}}} are the mean values of the fixed and mobile images. This metric is only used to find local translation in Yadics. This metric with translation transform can be solved using cross-correlation methods, which are non iterative and can be accelerated using Fast Fourier Transform . === Classification of transformations === There are three categories of parametrization: elastic, global and local transformation. The elastic transformations respect the partition of unity, there are no holes created or surfaces counted several times. This is commonly used in Image Registration by the use of B-Spline functions and in solid mechanics with finite element basis. The global transformations are defined on the whole picture using rigid body or affine transformation (which is equivalent to homogeneous strain transformation). More complex transformations can be defined such as mechanically based one. These transformations have been used for stress intensity factor identification by and for rod strain by. The local transformation can be considered as the same global transformation defined on several Zone Of Interest (ZOI) of the fixed image. ==== Global ==== Several global transforms have been implemented: Rigid and homogeneous (Tx,Ty,Rz in 2D; Tx,Ty,Tz,Rx,Ry,Rz,Exx,Eyy,Ezz,Eyz,Exz,Exy in 3D) Brazilian (Only in 2D), Dynamic Flexion, ==== Elastic ==== First-order quadrangular finite elements Q4P1 are used in Yadics. ===== Local ===== Every global transform can be used on a local mesh. === Optimization === The YaDICs optimization process follows a gradient descent scheme. The first step is to compute the gradient of the metric regarding the transform parameters ∂ S S D ( μ , I F , I M ) ∂ μ = 2 | Ω F | ∑ x i ∈ Ω F ( I F ( x i ) − I M ( T μ ( x i ) ) ) ∂ I M ( T μ ( x i ) ∂ μ = 2 | Ω F | ∑ x i ∈ Ω F ( I F ( x i ) − I M ( T μ ( x i ) ) ) ( ∂ T μ ( x i ) ∂ μ ) t ∂ I M ( T μ ( x i ) ) ∂ x {\displaystyle {\begin{array}{lcl}{\dfrac {\partial SSD(\mu ,{\mathcal {I_{F}}},{\mathcal {I_{M}}})}{\partial \mu }}&=&{\dfrac {2}{\left|\Omega _{F}\right|}}\sum _{x_{i}\in \Omega _{F}}\left({\mathcal {I_{F}}}(x_{i})-{\mathcal {I_{M}}}({T}_{\mu }(x_{i}))\right){\dfrac {\partial {\mathcal {I_{M}}}({T}_{\mu }(x_{i})}{\partial \mu }}\\&=&{\dfrac {2}{\left|\Omega _{F}\right|}}\sum _{x_{i}\in \Omega _{F}}\left({\mathcal {I_{F}}}(x_{i})-{\mathcal {I_{M}}}({T}_{\mu }(x_{i}))\right)\left({\dfrac {\partial {T}_{\mu }(x_{i})}{\partial \mu }}\right)^{t}{\dfrac {\partial {\mathcal {I_{M}}}({T}_{\mu }(x_{i}))}{\partial x}}\\\end{array}}} ==== Gradient method ==== Once the metric gradient has been computed, one has to find an optimization strategy The gradient method principle is explained below: μ k + 1 = μ k + α k d k {\displaystyle \mu _{k+1}=\mu _{k}+\alpha _{k}d_{k}} The gradient step can be constant or updated at every iteration. d k = − γ k ∂ C ( μ , I F , I M ) ∂ μ {\displaystyle d_{k}=-\gamma _{k}{\dfrac {\partial {\mathcal {C}}(\mu ,{\mathcal {I_{F}}},{\mathcal {I_{M}}})}{\partial \mu }}} , γ k {\displaystyle \gamma _{k}} allows one to choose between the following methods : γ k {\displaystyle \gamma _{k}} ⟹ {\displaystyle \Longrightarrow } steepest descent, γ k = [ ∂ C ( μ , I F , I M ) ∂ μ ∂ C ( μ , I F , I M ) ∂ μ t ] − 1 {\displaystyle \gamma _{k}=\left[{\dfrac {\partial {\mathcal {C}}(\mu ,{\mathcal {I_{F}}},{\mathcal {I_{M}}})}{\partial \mu }}{\dfrac {\partial {\mathcal {C}}(\mu ,{\mathcal {I_{F}}},{\mathcal {I_{M}}})}{\partial \mu }}^{t}\right]^{-1}} ⟹ {\displaystyle \Longrightarrow } Gauss-Newto

  Read more →
• 

  World Congress of Universal Documentation

  The World Congress of Universal Documentation was held from 16 to 21 August 1937 in Paris, France. Delegates from 45 countries met to discuss means by which all of the world's information, in print, in manuscript, and in other forms, could be efficiently organized and made accessible. == The Congress in the history of information science == The Congress, held at the Trocadéro under "the auspices" of the Institut International de Bibliographie, was "the apotheosis" of a general movement in the 1930s towards the classification of the growing mass of information and the improvement of access to that information. For the first time in the history of information science, technological means were beginning to catch up with theoretical ends, and the discussions at the conference reflected that fact. Its participation in the Congress was one of the first projects of the American Documentation Institute (ADI). Participants in the conference discussed what has been more recently called "a continuously updated hypertext encyclopedia." Joseph Reagle sees many of the ideas considered at the conference as forerunners of some of the key goals and norms of Wikipedia. == Microfilm == The main resolution adopted by the congress proposed that microfilm be used to make information universally available. Watson Davis, chairman of the American delegation and president of the ADI, stated that the volume of information being produced created difficult problems of access and preservation, but that these could be solved by the use of microfilm. In his address to the Congress, Davis said: Most immediate and practical to put into operation is the microfilming of material in libraries upon demand. It will become fashionable and economical to send a potential book borrower a little strip of microfilm for his permanent possession instead of the book and then badgering him to return it before he has had a chance to use it effectively. I believe that reading machines for microfilm will become as common as typewriters in studies and laboratories. If the principal libraries and information centers of the world will cooperate in such "bibliofilm services," as they are called, if they exchange orders and have essentially uniform methods, forms for ordering, standard microfilm format and production methods and comparable if not uniform prices, the resources of any library will be placed at the disposal of any scholar or scientist anywhere in the world. All the libraries cooperating will merge into one world library without loss of identity or individuality. The world's documentation will become available to even the most isolated and individualistic scholar. The Congress included two separate exhibits on microfilm. One was of the equipment used at the Bibliothèque nationale de France and the other, coordinated by Herman H. Fussler of the University of Chicago, consisting of "an entire microfilm laboratory," complete with cameras, a darkroom, and various kinds of reading machines. Emanuel Goldberg presented a paper on an early copying camera he had invented. Other resolutions passed by the Congress concerned uniform standards for the preparation of articles, for classifying books and other documents, for indexing newspapers and periodicals, and for cooperation between libraries. == H. G. Wells == In his address to the Congress, H. G. Wells said that he thought that his idea of the "world brain" was a precursor to the ideas other delegates were proposing, and explicitly linked the projects being discussed to the work of the encyclopédistes: I am speaking of a process of mental organization throughout the world which I believe to be as inevitable as anything can be in human affairs. All the distresses and horrors of the present time are fundamentally intellectual. The world has to pull its mind together, and this [Congress] is the beginning of its efforts. Civilization is a Phoenix. It perishes in flames and even as it dies it is born again. This synthesis of knowledge upon which you are working is the necessary beginning of a new world. It is good to be meeting here in Paris where the first encyclopedia of power was made. It would be impossible to overrate our debt to Diderot and his associates. == Other participants == Participants in the Congress included authors, librarians, scholars, archivists, scientists, and editors. Some of the notable people in attendance not mentioned above were:

  Read more →
• 

  Basic Formal Ontology

  Basic Formal Ontology (BFO) is a top-level ontology developed by Barry Smith and colleagues to promote interoperability among domain ontologies. The BFO methodology accomplishes this through a process of downward population. BFO is a formal ontology. The structure of BFO is based on a division of entities into two disjoint categories of continuant and occurrent, the former consists of objects and spatial regions, the latter contains processes conceived as extended through (or spanning) time. BFO thereby seeks to consolidate both time and space within a single framework A guide to building BFO-conformant domain ontologies was published by MIT Press in 2015. In 2021, the standard ISO/IEC 21838-2:2021 Information Technology — Top-level Ontologies (TLO) — Part 2: Basic Formal Ontology (BFO) was published by the Joint Technical Committee of the International Standards Organization and the International Electrotechnical Commission. ISO/IEC 21838 is a multi-part standard. Part 1 of the standard specifies the requirements that must be met if an ontology is to be classified as a top-level ontology by the standard. == History == BFO arose against the background of research in ontologies in the domain of geospatial information science by David Mark, Pierre Grenon, Achille Varzi and others, with a special role for the study of vagueness and of the ways sharp boundaries in the geospatial and other domains are created by fiat. BFO has passed through four major releases. 2001: release of BFO 1 2007: release of BFO 1.1 2015: release of BFO 2.0 2020: release of BFO 2020 2021: release of BFO 2020 as an ISO/IEC Standard The current revision was released in 2020, and this forms the basis of the standard ISO/IEC 21838-2, which was released by the Joint Committee of the International Standards Organization and International Electrotechnical Commission in 2021. == Applications == BFO has been adopted as a foundational ontology by over 650 ontology projects, principally in the areas of biomedical ontology, security and defense (intelligence) ontology, and industry ontologies. Example applications of BFO can be seen in the Ontology for Biomedical Investigations (OBI). In January 2024, BFO and the Common Core Ontologies (CCO), a suite of BFO-extension ontologies, were adopted as the "baseline standards for formal DOD and IC ontology" development work in the DOD and Intelligence Community. A memorandum to this effect was signed by the chief data officers of the DOD, the Office of the Director of National Intelligence and the Chief Digital and Artificial Intelligence Office.

  Read more →
• 

  Wearable technology

  Wearable technology is a category of small electronic and mobile devices with wireless communications capability designed to be worn on the human body and are incorporated into gadgets, accessories, or clothes. Common types of wearable technology include smartwatches, fitness trackers, and smartglasses. Wearable electronic devices are often close to or on the surface of the skin, where they detect, analyze, and transmit information such as vital signs, and/or ambient data and which allow in some cases immediate biofeedback to the wearer. Wearable devices collect vast amounts of data from users making use of different behavioral and physiological sensors, which monitor their health status and activity levels. Wrist-worn devices include smartwatches with a touchscreen display, while wristbands are mainly used for fitness tracking but do not contain a touchscreen display. Wearable devices such as activity trackers are an example of the Internet of things, since "things" such as electronics, software, sensors, and connectivity are effectors that enable objects to exchange data (including data quality) through the internet with a manufacturer, operator, and/or other connected devices, without requiring human intervention. Wearable technology offers a wide range of possible uses, from communication and entertainment to improving health and fitness, however, there are worries about privacy and security because wearable devices have the ability to collect personal data. Wearable technology has a variety of use cases which is growing as the technology is developed and the market expands. It can be used to encourage individuals to be more active and improve their lifestyle choices. Healthy behavior is encouraged by tracking activity levels and providing useful feedback to enable goal setting. This can be shared with interested stakeholders such as healthcare providers. Wearables are popular in consumer electronics, most commonly in the form factors of smartwatches, smart rings, and implants. Apart from commercial uses, wearable technology is being incorporated into navigation systems, advanced textiles (e-textiles), and healthcare. As wearable technology is being proposed for use in critical applications, like other technology, it is vetted for its reliability and security properties. == History == In the 1500s, German inventor Peter Henlein (1485–1542) created small watches that were worn as necklaces. A century later, pocket watches grew in popularity as waistcoats became fashionable for men. Wristwatches were created in the late 1600s but were worn mostly by women as bracelets. Pedometers were developed around the same time as pocket watches. The concept of a pedometer was described by Leonardo da Vinci around 1500, and the Germanic National Museum in Nuremberg has a pedometer in its collection from 1590. In the late 1800s, the first wearable hearing aids were introduced. In 1904, aviator Alberto Santos-Dumont pioneered the modern use of the wristwatch. In 1949, American biophysicist Norman Holter invented the very first health monitoring device. His invention, the Holter monitor, was groundbreaking as one of the first wearable devices capable of tracking vital health data outside of a clinical setting. In the 1970s, calculator watches became available, reaching the peak of their popularity in the 1980s. From the early 2000s, wearable cameras were being used as part of a growing sousveillance movement. Expectations, operations, usage and concerns about wearable technology was floated on the first International Conference on Wearable Computing. In 2008, Ilya Fridman incorporated a hidden Bluetooth microphone into a pair of earrings. Big tech companies such as Apple, Samsung, and Fitbit have expanded on this idea by interfacing with smartphones and personal computer software to collect a wide variety of data. Wearable devices include dedicated health monitors, fitness bands, and smartwatches. In 2010, Fitbit released its first step counter. Wearable technology which tracks information such as walking and heart rate is part of the quantified self movement. In 2013, McLear, also known as NFC Ring, released a "smart ring". The smart ring could make bitcoin payments, unlock other devices, and transfer personally identifying information, and also had other features. In 2013, one of the first widely available smartwatches was the Samsung Galaxy Gear. Apple followed in 2015 with the Apple Watch. === Prototypes === From 1991 to 1997, Rosalind Picard and her students, Steve Mann and Jennifer Healey, at the MIT Media Lab designed, built, and demonstrated data collection and decision making from "Smart Clothes" that monitored continuous physiological data from the wearer. These "smart clothes", "smart underwear", "smart shoes", and smart jewellery collected data that related to affective state and contained or controlled physiological sensors and environmental sensors like cameras and other devices. At the same time, also at the MIT Media Lab, Thad Starner and Alex "Sandy" Pentland develop augmented reality. In 1997, their smartglass prototype is featured on 60 Minutes and enables rapid web search and instant messaging. Though the prototype's glasses are nearly as streamlined as modern smartglasses, the processor was a computer worn in a backpack – the most lightweight solution available at the time. In 2009, Sony Ericsson teamed up with the London College of Fashion for a contest to design digital clothing. The winner was a cocktail dress with Bluetooth technology making it light up when a call is received. Zach "Hoeken" Smith of MakerBot fame made keyboard pants during a "Fashion Hacking" workshop at a New York City creative collective. The Tyndall National Institute in Ireland developed a "remote non-intrusive patient monitoring" platform which was used to evaluate the quality of the data generated by the patient sensors and how the end users may adopt to the technology. More recently, London-based fashion company CuteCircuit created costumes for singer Katy Perry featuring LED lighting so that the outfits would change color both during stage shows and appearances on the red carpet such as the dress Katy Perry wore in 2010 at the MET Gala in NYC. In 2012, CuteCircuit created the world's first dress to feature Tweets, as worn by singer Nicole Scherzinger. In 2010, McLear, also known as NFC Ring, developed prototypes of its "smart ring" devices, before a Kickstarter fundraising in 2013. In 2014, graduate students from the Tisch School of Arts in New York designed a hoodie that sent pre-programmed text messages triggered by gesture movements. Around the same time, prototypes for digital eyewear with heads up display (HUD) began to appear. The US military employs headgear with displays for soldiers using a technology called holographic optics. In 2010, Google started developing prototypes of its optical head-mounted display Google Glass, which went into customer beta in March 2013. == Usage == In the consumer space, sales of smart wristbands (aka activity trackers such as the Jawbone UP and Fitbit Flex) started accelerating in 2013. One in five American adults have a wearable device, according to the 2014 PriceWaterhouseCoopers Wearable Future Report. As of 2009, decreasing cost of processing power and other components was facilitating widespread adoption and availability. In professional sports, wearable technology has applications in monitoring and real-time feedback for athletes. Examples of wearable technology in sport include accelerometers, pedometers, and GPS's which can be used to measure an athlete's energy expenditure and movement pattern. In cybersecurity and financial technology, secure wearable devices have captured part of the physical security key market. McLear, also known as NFC Ring, and VivoKey developed products with one-time pass secure access control. In health informatics, wearable devices have enabled better capturing of human health statistics for data driven analysis. This has facilitated data-driven machine learning algorithms to analyse the health condition of users. In business, wearable technology helps managers easily supervise employees by knowing their locations and what they are currently doing. Employees working in a warehouse also have increased safety when working around chemicals or lifting something. Smart helmets are employee safety wearables that have vibration sensors that can alert employees of possible danger in their environment. == Wearable technology and health == Wearable technology is often used to monitor a user's health. Given that such a device is in close contact with the user, it can easily collect data. It started as soon as 1980 where first wireless ECG was invented. In the last decades, there has been substantial growth in research of e.g. textile-based, tattoo, patch, and contact lenses as well as circulation of a notion of "quantified self", transhumanism-related ideas, and growth of life ex

  Read more →
• 

  GeneTalk

  GeneTalk is a web-based platform, tool, and database for filtering, reduction and prioritization of human sequence variants from next-generation sequencing (NGS) data. GeneTalk allows editing annotation about sequence variants and build up a crowd sourced database with clinically relevant information for diagnostics of genetic disorders. GeneTalk allows searching for information about specific sequence variants and connects to experts on variants that are potentially disease-relevant. == Application to diagnostics == Users can upload NGS data in Variant Call Format (VCF) onto the GeneTalk server into their accounts. All entries of the file are preprocessed and shown in the integrated VCF viewer. Filtering tools are set by the user to reduce the number of clinically non-relevant variants. After filtering and prioritization users can interpret relevant variants by retrieving information (annotations) about variants from the GeneTalk database. The communication platform allow users to contact experts about specific variants, genes, or genetic disorders, to exchange knowledge and expertise. === Analysis procedure === Steps required to analyze VCF files Upload VCF file Edit pedigree and phenotype information for segregation filtering Filter VCF file by editing the filtering options View results and annotations Add annotations === Filtering tools === The following filtering options may be used to reduce the non-relevant sequence variants in VCF files. Functional – filter out variants that have effects on protein level Linkage – filter out variants that are on specified chromosomes Gene panel – filter variants by genes or gene panels, subscribe to publicly available gene panels or create own ones Frequency – show only variants with a genotype frequency lower than specified Inheritance – filter out variants by presumed mode of inheritance Annotation – show only variants with a score for medical relevance and scientific evidence == Communication platform and expert network == Users can share VCF files with colleagues and coworkers. The integrated mailing systems allows users to contact experts easily. Users can create annotations and comments and rate annotations regarding medical relevance and scientific evidence, that is helpful for the community of users for diagnosis of genetic disorders. Registered users provide information about their field of knowledge in their profile and can be contacted by other users. == Potential applications == Developing diagnostics Genetic analysis Capturing data generated by community Communication and exchange of knowledge and expertise

  Read more →
• 

  Living lab

  The concept of the living lab has been defined in multiple ways. A definition from the European Network of Living Labs (ENoLL) is used most widely, describing them as "user-centred open innovation ecosystems” that integrate research and innovation through co-creation in real-world environments.[1] Emerging at the intersection of ambient intelligence research and user experience methodologies in the late 1990s, the concept was pioneered at the Massachusetts Institute of Technology (MIT) as a way to study human interaction with new technologies in natural settings. Over time, living labs have evolved beyond their origins as controlled research environments, becoming dynamic platforms for participatory design, collaborative experimentation, and iterative innovation across various domains, including urban development, healthcare, sustainability, and digital technology. Characterized by principles such as real-world experimentation, active user involvement, and multi-stakeholder collaboration, living labs enable the continuous adaptation and validation of solutions in everyday contexts. Today, they are implemented globally, supported by networks like the European Network of Living Labs (ENoLL), and increasingly recognized as vital tools for addressing local and global transformation agendas. == Background == The term "living lab" has emerged in parallel from the ambient intelligence (AmI) research communities context and from the discussion on experience and application research (EAR). The emergence of the term is based on the concept of user experience and ambient intelligence. The term dates back to the late 1990s when Professor William J. Mitchell, Kent Larson, and Alex (Sandy) Pentland at the Massachusetts Institute of Technology were credited with first exploring the concept of a living laboratory. It was first associated with MIT's Media Lab as a concept for studying real-life contexts, where they described a living lab as a controlled environment designed to test new information and communication technology (ICT) innovations in a simulated home setting. This was also when some of the key characteristics often assigned to living labs today began to take shape. They argued that a living lab represents a user-centric research methodology for sensing, prototyping, validating and refining complex solutions in multiple and evolving real-life contexts. Research on living labs has expanded since the 1990s, especially in the 2010s, with growing interest in co-creation and participatory design. Particularly in Europe, the living lab evolved into a model that focused on studying user interactions with technology in real-world environments. This shift was influenced by earlier experiences in participatory design and social experiments with ICT. As interest grew, the term began to encompass a broader array of initiatives and projects, leading to variations in its interpretation and implementation. Today, living labs are used in various fields, such as technology, healthcare, and urban sustainability, showing a transition from a narrow focus on their role as controlled environments to a more wide-ranging understanding of collaborative innovation addressing real societal challenges, while also being referred to with various descriptions and definitions available from different sources. == Description == The ENoLL definition that refers to living labs as "user-centred open innovation ecosystems” that integrate research and innovation through co-creation in real-world environments is the most widely accepted description of living labs in academic literature. In simple terms, living labs can be described as an organization or experimental space, that can be both virtually or physically located, bringing different stakeholders from research, business, government, and citizens together to design and test solutions to be implemented in a real world environment. A common definition for the living lab term still does not exist to this day, which is due to the fact that living labs are interpreted and implemented across different contexts and can cover a wide range of activities and organizations, leading to different understandings of how living labs should function. Living labs also often operate in various territorial contexts (e.g. city, agglomeration, region, campus), and can vary in their methodological approach integrating concurrent research and innovation processes within a public-private-people partnership. Despite these variations, common characteristics include user-centricity, real-world experimentation, multi-stakeholder collaboration, and iterative innovation processes. The systematic user co-creation approach refers to integrating research and innovation processes through the co-creation, exploration, experimentation and evaluation of innovative ideas, scenarios, concepts and related technological artefacts in real life use cases. Such use cases involve user communities, not only as observed subjects but also as a source of creation. This approach allows all involved stakeholders to concurrently consider both the global performance of a product or service and its potential adoption by users. This consideration may be made at the earlier stage of research and development and through all elements of the product life-cycle, from design up to recycling. User-centred research methods, such as action research, community informatics, contextual design, user-centered design, participatory design, empathic design, emotional design, and other usability methods, already exist but fail to sufficiently empower users for co-creating into open development environments. More recently, the Web 2.0 has demonstrated the positive impact of involving user communities in new product development (NPD) such as mass collaboration projects (e.g. crowdsourcing, Wisdom of Crowds) in collectively creating new contents and applications. Real-world experimentation emphasizes conducting activities in real-life settings to ensure that the results of the projects and solutions are applicable to actual market conditions. Multi-stakeholder collaboration refers to an approach that involved various stakeholders, such as users, businesses, researchers, and government entities, working together towards a common goal. This is an important characteristics of living lab because collaboration of these diverse groups allows for exchange of ideas and perspectives, which are thought to enhance innovation processes. Iterative innovation processes involve a cyclical method of developing products or services, where stages such as research, development, testing, and implementation are revisited multiple times based on feedback and evaluation. This process allows for continuous improvement of the innovation, product, or service being developed. In particular, the ongoing involvement of the user creates feedback mechanisms that are ultimately key to successful development and implementation of products and services. A living lab is not similar to a testbed as its philosophy is to turn users, from being traditionally considered as observed subjects for testing modules against requirements, into value creation in contributing to the co-creation and exploration of emerging ideas, breakthrough scenarios, innovative concepts and related artefacts. Hence, a living lab rather constitutes an experiential environment, which could be compared to the concept of experiential learning, where users are immersed in a creative social space for designing and experiencing their own future. Living labs could also be used by policy makers and users/citizens for designing, exploring, experiencing and refining new policies and regulations in real-life scenarios for evaluating their potential impacts before their implementations. == European Network of Living Labs (ENoLL) == The European Network of Living Labs (ENoLL) is an international, non-profit, independent association of certified living labs, which popularized the living lab concept in the aim to increase user involvement in innovation. Formed in November 2006 under the guidance of the Finnish European Presidency, ENoLL is composed of a variety of stakeholders, including municipalities and research institutes, businesses, and users. Its primary role is to support the collaboration among living labs across Europe and includes many living labs focused on user-driven innovation across sectors. ENoLL focuses on facilitating knowledge exchange, joint actions and project partnerships among its historically labelled +/- 500 members, influencing EU policies, promoting living labs and enabling their implementation worldwide. ENoLL serves as a platform for linking living labs around the globe, which enables knowledge sharing and collaborative learning among diverse cultural environments. Membership to the platform is open to organizations worldwide, and ENoLL has expanded beyond Europe to include global members. ENoLL follows an application and accreditation pro

  Read more →
• 

  Conceptions of Library and Information Science

  Conceptions of Library and Information Science (CoLIS) is a series of conferences about historical, empirical and theoretical perspectives in Library and Information Science. == CoLIS conferences == CoLIS 1 1991 in Tampere, Finland CoLIS 2 1996 in Copenhagen, Denmark CoLIS 3 1999 in Dubrovnik, Croatia CoLIS 4 2002 in Seattle, US CoLIS 5 2005 in Glasgow, Scotland CoLIS 6 2007 in Borås, Sweden CoLIS 7 June 2010 in London, at City University London. CoLIS 8 August 19–22, 2013, in Copenhagen, Denmark, at The Royal School of Library and Information Science. CoLIS 9 June 27–29, 2016, in Uppsala, Sweden, at Uppsala University. CoLIS 10 June 16–19, 2019, in Ljubljana, Slovenia, Faculty of Arts CoLIS 11 May 29–June 1, 2022, in Oslo, Norway, Oslo Metropolitan University.

  Read more →
• 

  Data janitor

  A data janitor is a person who works to take big data and condense it into useful amounts of information. Also known as a "data wrangler", a data janitor sifts through data for companies in the information technology industry. A multitude of start-ups rely on large amounts of data, so a data janitor works to help these businesses with this basic, but difficult process of interpreting data. While it is a commonly held belief that data janitor work is fully automated, many data scientists are employed primarily as data janitors. The information technology industry has been increasingly turning towards new sources of data gathered on consumers, so data janitors have become more commonplace in recent years.

  Read more →
• 

  Transcription software

  Transcription software assists in the conversion of human speech into a text transcript. Audio or video files can be transcribed manually or automatically. Transcriptionists can replay a recording several times in a transcription editor and type what they hear. By using transcription hot keys, the manual transcription can be accelerated, the sound filtered, equalized or have the tempo adjusted when the clarity is not great. With speech recognition technology, transcriptionists can automatically convert recordings to text transcripts by opening recordings in a PC and uploading them to a cloud for automatic transcription, or transcribe recordings in real-time by using digital dictation. Depending on quality of recordings, machine generated transcripts may still need to be manually verified. The accuracy rate of the automatic transcription depends on several factors such as background noises, speakers' distance to the microphone, and accents. Transcription software, as with transcription services, is often used for business, legal, or medical purposes. Compared with audio content, a text transcript is searchable, takes up less computer memory, and can be used as an alternate method of communication, such as for subtitles and closed captions. Some clinical environments also use digital tools to support transcription workflows, including ambient documentation systems that employ Speech recognition to capture portions of clinical encounters and generate draft notes for later review. These tools are typically used alongside conventional transcription methods. The definition of transcription "software", as compared with transcription "service", is that the former is sufficiently automated that a user can run the entire system without engaging outside personnel. New software-as-a-service and cloud computing models use artificial intelligence, machine learning and natural language processing to convert speech to text and continuously learn new phrases and accents. AI transcription can, however, lead to hallucinations and other errors. == Development == Research at Google released a free android app Google Live Transcribe, it runs on Google Cloud. Google Chrome developed and has an available built in English Live Caption. Google Docs, Google Translate, Google Assistant, GBoard Google Text to Speech engine support transcription tool too. OpenAI launched Whisper, an open-source speech recognition deep learning model in September 2022. In 2024, an AI-powered transcription platform, Transkriptor, was launched, enabling the automatic conversion of audio and video recordings into text using speech recognition technology, with support for transcription in 100 languages and processing of content uploaded via a web interface as well as mobile and browser extensions. It is part of the Tor.app suite of AI-based language processing tools.

  Read more →
• 

  Online public access catalog

  The online public access catalog (OPAC), now frequently synonymous with library catalog, is an online database of materials held by a library or group of libraries. Online catalogs have largely replaced the analog card catalogs previously used in libraries. == History == === Early online === Although a handful of experimental systems existed as early as the 1960s, the first large-scale online catalogs were developed at Ohio State University in 1975 and the Dallas Public Library in 1978. These and other early online catalog systems tended to closely reflect the card catalogs that they were intended to replace. Using a dedicated terminal or telnet client, users could search a handful of pre-coordinate indexes and browse the resulting display in much the same way they had previously navigated the card catalog. Throughout the 1980s, the number and sophistication of online catalogs grew. The first commercial systems appeared, and would by the end of the decade largely replace systems built by libraries themselves. Library catalogs began providing improved search mechanisms, including Boolean and keyword searching, as well as ancillary functions, such as the ability to place holds on items that had been checked-out. At the same time, libraries began to develop applications to automate the purchase, cataloging, and circulation of books and other library materials. These applications, collectively known as an integrated library system (ILS) or library management system, included an online catalog as the public interface to the system's inventory. Most library catalogs are closely tied to their underlying ILS system. === Stagnation and dissatisfaction === The 1990s saw a relative stagnation in the development of online catalogs. Although the earlier character-based interfaces were replaced with ones for the Web, both the design and the underlying search technology of most systems did not advance much beyond that developed in the late 1980s. At the same time, organizations outside of libraries began developing more sophisticated information retrieval systems. Web search engines like Google and popular e-commerce websites such as Amazon.com provided simpler to use (yet more powerful) systems that could provide relevancy ranked search results using probabilistic and vector-based queries. Prior to the widespread use of the Internet, the online catalog was often the first information retrieval system library users ever encountered. Now accustomed to web search engines, newer generations of library users have grown increasingly dissatisfied with the complex (and often arcane) search mechanisms of older online catalog systems. This has, in turn, led to vocal criticisms of these systems within the library community itself, and in recent years to the development of newer (often termed 'next-generation') catalogs. === Next-generation catalogs === Newer generations of library catalog systems, typically called discovery systems (or a discovery layer), are distinguished from earlier OPACs by their use of more sophisticated search technologies, including relevancy ranking and faceted search, as well as features aimed at greater user interaction and participation with the system, including tagging and reviews. These new features rely heavily on existing metadata which may be poor or inconsistent, particularly for older records. Newer catalog platforms may be independent of the organization's integrated library system (ILS), instead providing drivers that allow for the synchronization of data between the two systems. While the original online catalog interfaces were almost exclusively built by ILS vendors, libraries have increasingly sought next-generation catalogs built by enterprise search companies and open-source software projects, often led by libraries themselves. == Union catalogs == Although library catalogs typically reflect the holdings of a single library, they can also contain the holdings of a group or consortium of libraries. These systems, known as union catalogs, are usually designed to aid the borrowing of books and other materials among the member institutions via interlibrary loan. Examples of this type of catalogs include COPAC, SUNCAT, NLA Trove, and WorldCat—the last catalogs the collections of libraries worldwide. == Related systems == There are a number of systems that share much in common with library catalogs, but have traditionally been distinguished from them. Libraries utilize these systems to search for items not traditionally covered by a library catalog, although these systems are sometimes integrated into a more comprehensive discovery system. Bibliographic databases—such as Medline, ERIC, PsycINFO, Scopus, Web of Science, and many others—index journal articles and other research data. There are also a number of applications aimed at managing documents, photographs, and other digitized or born-digital items such as Digital Commons and DSpace. Particularly in academic libraries, these systems (often known as digital library systems or institutional repository systems) assist with efforts to preserve documents created by faculty and students. Electronic resource management helps librarians to track selection, acquisition, and licensing of a library's electronic information resources.

  Read more →
• 

  Quality of Data

  Quality of Data (QoD) is a designation coined by L. Veiga, that specifies and describes the required Quality of Service of a distributed storage system from the Consistency point of view of its data. It can be used to support big data management frameworks, Workflow management, and HPC systems (mainly for data replication and consistency). It takes into account data semantics, namely the Time interval of data freshness, the Sequence of tolerable number of outstanding versions of the data read before ore refresh, and the Value divergence allowed before displaying it. Initially it was based on a model from an existing research work regarding vector-field Consistency, awarded the best-paper prize in the ACM/IFIP/Usenix Middleware Conference 2007 and later enhanced for increased scalability and fault-tolerance. This consistency model has been successfully applied and proven in big data key/value store Apache HBase, initially designed as a middleware module seating between clusters from separate data centres. The HBase-QoD coupling minimises bandwidth usage and optimises resources allocation during replication achieving the desired consistency level at a more fine-grained level. QoD is defined by the three-dimensions of vector k=(θ,σ,ν), but with a broader view of the issue, applicable also to large-scale data management techniques in regards to their timely delivery. == Other descriptions == Quality of Data should not be confused with other definitions for data quality such as completeness, validity, and accuracy.

  Read more →