AI Chat Free Online

AI Chat Free Online — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

International Conference on Language Resources and Evaluation

The International Conference on Language Resources and Evaluation is an international conference organised by the ELRA Language Resources Association every other year (on even years) with the support of institutions and organisations involved in Natural language processing. The series of LREC conferences was launched in Granada in 1998. == History of conferences == The survey of the LREC conferences over the period 1998-2013 was presented during the 2014 conference in Reykjavik as a closing session. It appears that the number of papers and signatures is increasing over time. The average number of authors per paper is higher as well. The percentage of new authors is between 68% and 78%. The distribution between male (65%) and female (35%) authors is stable over time. The most frequent technical term is "annotation", then comes "part-of-speech". == The LRE Map == The LRE Map was introduced at LREC 2010 and is now a regular feature of the LREC submission process for both the conference papers and the workshop papers. At the submission stage, the authors are asked to provide some basic information about all the resources (in a broad sense, i.e. including tools, standards and evaluation packages), either used or created, described in their papers. All these descriptors are then gathered in a global matrix called the LRE Map. This feature has been extended to several other conferences.
Read more →
Intel Management Engine

The Intel Management Engine (ME), also known as the Intel Manageability Engine, is an autonomous subsystem that has been incorporated in virtually all of Intel's processor chipsets since 2008. It is located in the Platform Controller Hub of modern Intel motherboards. The Intel Management Engine always runs as long as the motherboard is receiving power, even when the computer is turned off. This issue can be mitigated with the deployment of a hardware device which is able to disconnect all connections to mains power as well as all internal forms of energy storage. The Electronic Frontier Foundation and some security researchers have voiced concern that the Management Engine is a backdoor. Intel's main competitor, AMD, has incorporated the equivalent AMD Secure Technology (formally called Platform Security Processor) in virtually all of its post-2013 CPUs. == Difference from Intel AMT == The Management Engine is often confused with Intel AMT (Intel Active Management Technology). AMT runs on the ME, but is only available on processors with vPro. AMT gives device owners remote administration of their computer, such as powering it on or off, and reinstalling the operating system. However, the ME itself has been built into all Intel chipsets since 2008, not only those with AMT. While AMT can be unprovisioned by the owner, there is no official, documented way to disable the ME. == Design == The subsystem primarily consists of proprietary firmware running on a separate microprocessor that performs tasks during boot-up, while the computer is running, and while it is asleep. As long as the chipset or SoC is supplied with power (via battery or power supply), it continues to run even when the system is turned off. Intel claims the ME is required to provide full performance. Its exact workings are largely undocumented and its code is obfuscated using confidential Huffman tables stored directly in hardware, so the firmware does not contain the information necessary to decode its contents. === Hardware === Starting with ME 11 (introduced in Skylake CPUs), it is based on the Intel Quark x86-based 32-bit CPU and runs the MINIX 3 operating system. The ME firmware is stored in a partition of the SPI BIOS Flash, using the Embedded Flash File System (EFFS). Previous versions were based on an ARC core, with the Management Engine running the ThreadX RTOS. Versions 1.x to 5.x of the ME used the ARCTangent-A4 (32-bit only instructions) whereas versions 6.x to 8.x used the newer ARCompact (mixed 32- and 16-bit instruction set architecture). Starting with ME 7.1, the ARC processor could also execute signed Java applets. The ME has its own MAC and IP address for the out-of-band management interface, with direct access to the Ethernet controller; one portion of the Ethernet traffic is diverted to the ME even before reaching the host's operating system, for what support exists in various Ethernet controllers, exported and made configurable via Management Component Transport Protocol (MCTP). The ME also communicates with the host via PCI interface. Under Linux, communication between the host and the ME is done via /dev/mei or /dev/mei0. Until the release of Nehalem processors, the ME was usually embedded into the motherboard's northbridge, following the Memory Controller Hub (MCH) layout. With the newer Intel architectures (Intel 5 Series onwards), the ME is integrated into the Platform Controller Hub (PCH). === Firmware === By Intel's current terminology as of 2017, ME is one of several firmware sets for the Converged Security and Manageability Engine (CSME). Prior to AMT version 11, CSME was called Intel Management Engine BIOS Extension (Intel MEBx). Management Engine (ME) – mainstream chipsets Server Platform Services (SPS) – server chipsets and SoCs Trusted Execution Engine (TXE) – tablet/embedded/low power It was also found that the ME firmware version 11 runs MINIX 3. Management of the ME modules for provisioning inside the UEFI is done via a tool called Intel Flash Image Tool (FITC). ==== Modules ==== Active Management Technology (AMT) Intel Boot Guard (IBG) and Secure Boot Quiet System Technology (QST), formerly known as Advanced Fan Speed Control (AFSC), which provides support for acoustically optimized fan speed control, and monitoring of temperature, voltage, current and fan speed sensors that are provided in the chipset, CPU and other devices present on the motherboard. Communication with the QST firmware subsystem is documented and available through the official software development kit (SDK). Protected Audio Video Path, enforces HDCP Intel Anti-Theft Technology (AT), discontinued in 2015 Serial over LAN (SOL) Intel Platform Trust Technology (PTT), a firmware-based Trusted Platform Module (TPM) Near Field Communication, a middleware for NFC readers and vendors to access NFC cards and provide secure element access, found in later MEI versions. == The intricacies of working with Intel ME == It should also be noted that the ME region requires special cleaning and subsequent initialisation, for example, after replacing the platform hub on the motherboard. Usually, this requires an SPI programmer. There are known successful cases of this operation being performed. == Security vulnerabilities == Several weaknesses have been found in the ME. On May 1, 2017, Intel confirmed a Remote Elevation of Privilege bug (SA-00075) in its Management Technology. Every Intel platform with provisioned Intel Standard Manageability, Active Management Technology, or Small Business Technology, from Nehalem in 2008 to Kaby Lake in 2017 has a remotely exploitable security hole in the ME. Several ways to disable the ME without authorization that could allow ME's functions to be sabotaged have been found. Additional major security flaws in the ME affecting a very large number of computers incorporating ME, Trusted Execution Engine (TXE), and Server Platform Services (SPS) firmware, from Skylake in 2015 to Coffee Lake in 2017, were confirmed by Intel on November 20, 2017 (SA-00086). Unlike SA-00075, this bug is even present if AMT is absent, not provisioned or if the ME was "disabled" by any of the known unofficial methods. In July 2018, another set of vulnerabilities was disclosed (SA-00112). In September 2018, yet another vulnerability was published (SA-00125). === Ring −3 rootkit === A ring −3 rootkit was demonstrated by Invisible Things Lab for the Q35 chipset; it does not work for the later Q45 chipset as Intel implemented additional protections. The exploit worked by remapping the normally protected memory region (top 16 MB of RAM) reserved for the ME. The ME rootkit could be installed regardless of whether the AMT is present or enabled on the system, as the chipset always contains the ARC ME coprocessor. (The "−3" designation was chosen because the ME coprocessor works even when the system is in the S3 state. Thus, it was considered a layer below the System Management Mode rootkits.) For the vulnerable Q35 chipset, a keystroke logger ME-based rootkit was demonstrated by Patrick Stewin. === Zero-touch provisioning === Another security evaluation by Vassilios Ververis showed serious weaknesses in the GM45 chipset implementation. In particular, it criticized AMT for transmitting unencrypted passwords in the SMB provisioning mode when the IDE redirection and Serial over LAN features are used. It also found that the "zero touch" provisioning mode (ZTC) is still enabled even when the AMT appears to be disabled in BIOS. For about 60 euros, Ververis purchased from GoDaddy a certificate that is accepted by the ME firmware and allows remote "zero touch" provisioning of (possibly unsuspecting) machines, which broadcast their HELLO packets to would-be configuration servers. === SA-00075 (a.k.a. Silent Bob is Silent) === In May 2017, Intel confirmed that many computers with AMT have had an unpatched critical privilege escalation vulnerability (CVE-2017-5689). The vulnerability was nicknamed "Silent Bob is Silent" by the researchers who had reported it to Intel. It affects numerous laptops, desktops and servers sold by Dell, Fujitsu, Hewlett-Packard (later Hewlett Packard Enterprise and HP Inc.), Intel, Lenovo, and possibly others. Those researchers claimed that the bug affects systems made in 2010 or later. Other reports claimed the bug also affects systems made as long ago as 2008. The vulnerability was described as giving remote attackers: "full control of affected machines, including the ability to read and modify everything. It can be used to install persistent malware (possibly in firmware), and read and modify any data." === PLATINUM === In June 2017, the PLATINUM cybercrime group became notable for exploiting the serial over LAN (SOL) capabilities of AMT to perform data exfiltration of stolen documents. SOL is disabled by default and must be enabled to exploit this vulnerability. === SA-00086 === Some months after the previous bugs, and subsequent warnings from the EFF, securi
Read more →
Two-phase locking

In databases and transaction processing, two-phase locking (2PL) is a pessimistic concurrency control method that guarantees conflict-serializability. It is also the name of the resulting set of database transaction schedules (histories). The protocol uses locks, applied by a transaction to data, which may block (interpreted as signals to stop) other transactions from accessing the same data during the transaction's life. By the 2PL protocol, locks are applied and removed in two phases: Expanding phase: locks are acquired and no locks are released. Shrinking phase: locks are released and no locks are acquired. Two types of locks are used by the basic protocol: Shared and Exclusive locks. Refinements of the basic protocol may use more lock types. Using locks that block processes, 2PL, S2PL, and SS2PL may be subject to deadlocks that result from the mutual blocking of two or more transactions. == Read and write locks == Locks are used to guarantee serializability. A transaction is holding a lock on an object if that transaction has acquired a lock on that object which has not yet been released. For 2PL, the only used data-access locks are read-locks (shared locks) and write-locks (exclusive locks). Below are the rules for read-locks and write-locks: A transaction is allowed to read an object if and only if it is holding a read-lock or write-lock on that object. A transaction is allowed to write an object if and only if it is holding a write-lock on that object. A schedule (i.e., a set of transactions) is allowed to hold multiple locks on the same object simultaneously if and only if none of those locks are write-locks. If a disallowed lock attempts on being held simultaneously, it will be blocked. == Variants == Note that all conflict serializable schedules are also view serializable (but not vice-versa). === Two-phase locking === According to the two-phase locking protocol, each transaction handles its locks in two distinct, consecutive phases during the transaction's execution: Expanding phase (aka Growing phase): locks are acquired and no locks are released (the number of locks can only increase). Shrinking phase (aka Contracting phase): locks are released and no locks are acquired. The two phase locking rules can be summarized as: each transaction must never acquire a lock after it has released a lock. The serializability property is guaranteed for a schedule with transactions that obey this rule. Typically, without explicit knowledge in a transaction on end of phase 1, the rule is safely determined only when a transaction has completed processing and requested commit. In this case, all the locks can be released at once (phase 2). === Conservative two-phase locking === Conservative two-phase locking (C2PL) differs from 2PL in that transactions obtain all the locks they need before the actual execution begins. This is to ensure that a transaction that already holds some locks will not block waiting for other locks. C2PL prevents deadlocks. In cases of heavy lock contention, C2PL reduces the time locks are held on average, relative to 2PL and Strict 2PL, because transactions that hold locks are never blocked. In light lock contention, C2PL holds more locks than is necessary, because it is difficult to predict which locks will be needed in the future, thus leading to higher overhead. A C2PL transaction will not obtain any locks if it cannot obtain all the locks it needs in its initial request. Furthermore, each transaction needs to declare its read and write set (the data items that will be read/written), which is not always possible. Because of these limitations, C2PL is not used very frequently. === Strict two-phase locking === To comply with the strict two-phase locking (S2PL) protocol, a transaction needs to comply with 2PL, and release its write (exclusive) locks only after the transaction has ended (i.e., either committed or aborted). On the other hand, read (shared) locks are released regularly during the shrinking phase. Unlike 2PL, S2PL provides strictness (a special case of cascade-less recoverability). This protocol is not appropriate in B-trees because it causes Bottleneck (while B-trees always starts searching from the parent root). === Strong strict two-phase locking === or Rigorousness, or Rigorous scheduling, or Rigorous two-phase locking To comply with strong strict two-phase locking (SS2PL), a transaction's read and write locks are released only after that transaction has ended (i.e., either committed or aborted). A transaction obeying SS2PL has only a phase 1 and lacks a phase 2 until the transaction has completed. Every SS2PL schedule is also an S2PL schedule, but not vice versa.
Read more →
Biometric device

A biometric device is a security identification and authentication device. Such devices use automated methods of verifying or recognising the identity of a living person based on a physiological or behavioral characteristic. These characteristics include fingerprints, facial images, iris and voice recognition. == History == Biometric devices have been in use for thousands of years. Non-automated biometric devices have been in use since 500 BC, when ancient Babylonians would sign their business transactions by pressing their fingertips into clay tablets. Automation in biometric devices was first seen in the 1960s. The Federal Bureau of Investigation (FBI) in the 1960s, introduced the Indentimat, which started checking for fingerprints to maintain criminal records. The first systems measured the shape of the hand and the length of the fingers. Although discontinued in the 1980s, the system set a precedent for future Biometric Devices. == Subgroups == The characteristic of the human body is used to access information by the users. According to these characteristics, the sub-divided groups are Chemical biometric devices: Analyses the segments of the DNA to grant access to the users. Visual biometric devices: Analyses the visual features of the humans to grant access which includes iris recognition, face recognition, Finger recognition, and Retina Recognition. Behavioral biometric devices: Analyses the Walking Ability and Signatures (velocity of sign, width of sign, pressure of sign) distinct to every human. Olfactory biometric devices: Analyses the odor to distinguish between varied users. Auditory biometric devices: Analyses the voice to determine the identity of a speaker for accessing control. == Uses == === Workplace === Biometrics are being used to establish better and accessible records of the hour's employee's work. With the increase in "Buddy Punching" (a case where employees clocked out coworkers and fraudulently inflated their work hours) employers have looked towards new technology like fingerprint recognition to reduce such fraud. Additionally, employers are also faced with the task of proper collection of data such as entry and exit times. Biometric devices make for largely fool proof and reliable ways of enabling to collect data as employees have to be present to enter biometric details which are unique to them. === Immigration === As the demand for air travel grows and more people travel, modern-day airports have to implement technology in such a way that there are no long queues. Biometrics are being implemented in more and more airports as they enable quick recognition of passengers and hence lead to lower volume of people standing in queues. One such example is of the Dubai International Airport which plans to make immigration counters a relic of the past as they implement IRIS on the move technology (IOM) which should help the seamless departures and arrivals of passengers at the airport. === Handheld and personal devices === Fingerprint sensors can be found on mobile devices. The fingerprint sensor is used to unlock the device and authorize actions, like money and file transfers, for example. It can be used to prevent a device from being used by an unauthorized person. It is also used in attendance in number of colleges and universities. == Present day biometric devices == === Personal signature verification systems === This is one of the most highly recognised and acceptable biometrics in corporate surroundings. This verification has been taken one step further by capturing the signature while taking into account many parameters revolving around this like the pressure applied while signing, the speed of the hand movement and the angle made between the surface and the pen used to make the signature. This system also has the ability to learn from users as signature styles vary for the same user. Hence by taking a sample of data, this system is able to increase its own accuracy. === Iris recognition system === Iris recognition involves the device scanning the pupil of the subject and then cross referencing that to data stored on the database. It is one of the most secure forms of authentication, as while fingerprints can be left behind on surfaces, iris prints are extremely hard to be stolen. Iris recognition is widely applied by organisations dealing with the masses, one being the Aadhaar identification system issued by the Government of India to keep records of its population. The reason for this is that iris recognition makes use of iris prints of humans, which change little over the course of one's lifetime. == Problems with present day biometric devices == === Biometric spoofing === Biometric spoofing is a method of fooling a biometric identification management system, where a counterfeit mold is presented in front of the biometric scanner. This counterfeit mold emulates the unique biometric attributes of an individual so as to confuse the system between the artifact and the real biological target and gain access to sensitive data/materials. One such high-profile case of Biometric spoofing came to the limelight when it was found that German Defence Minister, Ursula von der Leyen's fingerprint had been successfully replicated by Chaos Computer Club. The group used high quality camera lenses and shot images from 6 feet away. They used a professional finger software and mapped the contours of the Ministers thumbprint. Although progress has been made to stop spoofing. Using the principle of pulse oximetry — the liveliness of the test subject is taken into account by measure of blood oxygenation and the heart rate. This reduces attacks like the ones mentioned above, although these methods aren't commercially applicable as costs of implementation are high. This reduces their real world application and hence makes biometrics insecure until these methods are commercially viable. === Accuracy === Accuracy is a major issue with biometric recognition. Passwords are still extremely popular, because a password is static in nature, while biometric data can be subject to change (such as one's voice becoming heavier due to puberty, or an accident to the face, which could lead to improper reading of facial scan data). When testing voice recognition as a substitute to PIN-based systems, Barclays reported that their voice recognition system is 95 percent accurate. This statistic means that many of its customers' voices might still not be recognised even when correct. This uncertainty revolving around the system could lead to slower adoption of biometric devices, continuing the reliance of traditional password-based methods. == Benefits of biometric devices over traditional methods of authentication == Biometric data cannot be lent and hacking of Biometric data is complicated hence it makes it safer to use than traditional methods of authentication like passwords which can be lent and shared. Passwords do not have the ability to judge the user but rely only on the data provided by the user, which can easily be stolen while Biometrics work on the uniqueness of each individual. Passwords can be forgotten and recovering them can take time, whereas Biometric devices rely on biometric data which tends to be unique to a person, hence there is no risk of forgetting the authentication data. A study conducted among Yahoo! users found that at least 1.5 percent of Yahoo users forgot their passwords every month, hence this makes accessing services more lengthy for consumers as the process of recovering passwords is lengthy. These shortcomings make Biometric devices more efficient and reduces effort for the end user. == Future == Researchers are targeting the drawbacks of present-day biometric devices and developing to reduce problems like biometric spoofing and inaccurate intake of data. Technologies which are being developed are- The United States Military Academy are developing an algorithm that allows identification through the ways each individual interacts with their own computers; this algorithm considers unique traits like typing speed, rhythm of writing and common spelling mistakes. This data allows the algorithm to create a unique profile for each user by combining their multiple behavioral and stylometric information. This can be very difficult to replicate collectively. A recent innovation by Kenneth Okereafor and, presented an optimized and secure design of applying biometric liveness detection technique using a trait randomization approach. This novel concept potentially opens up new ways of mitigating biometric spoofing more accurately, and making impostor predictions intractable or very difficult in future biometric devices. A simulation of Kenneth Okereafor's biometric liveness detection algorithm using a 3D multi-biometric framework consisting of 15 liveness parameters from facial print, finger print and iris pattern traits resulted in a system efficiency of the 99.2% over a cardinality of 125 distinct randomization combinat
Read more →
Bazaart

Bazaart is an AI-powered design platform with image and video editing capabilities for iOS, Android, MacOS, and the web. == History == Bazaart was founded in 2012 in Israel. In April 2012, Bazaart launched a Facebook app called Pinvolve, which converts Facebook Pages into Pinterest pinboards. From June to August 2012, it participated in the DreamIt startup accelerator in New York and raised $25,000 from the accelerator. In July 2012, it launched its first version as an iPad app connected to Pinterest. In December 2013, it pivoted and launched a major version of its app, a "social" photoshop that allowed users to edit images which could be pulled in from the camera roll, social networks, and other sources. In July 2014, Bazaart reached one million downloads and in December was selected by Apple as Best of 2014. In 2015, Bazaart added Photoshop integration in a partnership with Adobe. In September 2020, Bazaart launched an Android app. In December 2020, Bazaart was selected by Google as Best of 2020. In January 2022, Bazaart added video editing capabilities. In 2023, the platform added AI-powered backgrounds and video background removal features.
Read more →
Shader lamps

Shader lamps is a computer graphic technique used to change the appearance of physical objects. The still or moving objects are illuminated, using one or more video projectors, by static or animated texture or video stream. The method was invented at University of North Carolina at Chapel Hill by Ramesh Raskar, Greg Welch, Kok-lim Low and Deepak Bandyopadhyay in 1999 [1] as a follow on to Spatial Augmented Reality [2] also invented at University of North Carolina at Chapel Hill in 1998 by Ramesh Raskar, Greg Welch and Henry Fuchs. A 3D graphic rendering software is typically used to compute the deformation caused by the non perpendicular, non-planar or even complex projection surface. Complex objects (or aggregation of multiple simple objects) create self shadows that must be compensated by using several projectors. The objects are typically replaced by neutral color ones, the projection giving all its visual properties, thus the name shader lamps. The technique can be used to create a sense of invisibility, by rendering transparency. The object is illuminated not by a replacement of its own visual properties, but by the corresponding visual surface placed behind the object as seen from an arbitrary viewing point.
Read more →
My Drama

My Drama (also may be stylised as MyDrama) is a global streaming service specializing in vertical video series for Duanju. It is owned by the company Holywater Tech. The platform focuses on short-form, emotional storytelling optimized for smartphone viewing, offering content in over 30 languages across 190 countries. == History == My Drama was launched in 2024 by Holywater Tech, founded by Ukrainian entrepreneur Bogdan Nesvit and Anatolii Kasianov. The service gained international traction as part of a growing market for short-form vertical storytelling, influenced by mobile-first entertainment trends. My Drama primarily streams serialized vertical dramas, which are short-form episodes around 1-2 minutes in length designed for mobile consumption. Many series are adaptations of successful stories originally published on Holywater Tech's book platform My Passion. The platform employs AI technology in areas such as content recommendation and story generation, and is one of several Holywater apps focused on interactive entertainment. In 2024, My Drama won a People's Voice award at the 28th Annual Webby Awards. In 2025, My Drama received a Gold Award at the MUSE Creative Awards in the Mobile App: Video Streaming Services category. In 2025, the company received strategic investment from Fox Entertainment, aimed at expanding content creation capabilities and producing over 200 vertical video series. As of 2025, My Drama has produced over 56 titles and reached more than 40 million lifetime users, according to media reports. In January 2026, Holywater Tech raised $22 million in funding to expand its microdrama business in the United States. The investment round was led by Horizon Capital, with participation from U.S.-based investors including Endeavor Catalyst and Wheelhouse. The funding is intended to support the development of Holywater Tech's mobile-first vertical video platform, My Drama, as well as the company's AI-driven content initiatives, such as AI-assisted comics and anime. In February 2026, Holywater bought Jeynix, a studio that uses AI for special effects. This deal helps the company make better-quality shows and translate them into different languages much faster. == Partnerships == In 2024, Holywater Tech entered a partnership with Latin American studio Elefantec Global to distribute vertical dramas in Spanish-language markets. In early 2026, Fox Entertainment entered into a partnership with content creator Dhar Mann to produce a slate of 40 original vertical microdrama series. Under the agreement, the series debut exclusively on the My Drama platform, while global distribution is managed by Fox Entertainment Global. == Reception == My Drama has been highlighted in discussions of the global rise of vertical short drama platforms and has been compared with similar apps such as ReelShort and DramaBox.
Read more →
Immediate mode (computer graphics)

Immediate mode is an API design pattern in computer graphics libraries, in which the client calls directly cause rendering of graphics objects to the display, or in which the data to describe rendering primitives is inserted frame by frame directly from the client into a command list (in the case of immediate mode primitive rendering), without the use of extensive indirection – thus immediate – to retained resources. It does not preclude the use of double-buffering. Retained mode is an alternative approach. Historically, retained mode has been the dominant style in GUI libraries; however, both can coexist in the same library and are not necessarily exclusive in practice. == Overview == In immediate mode, the scene (complete object model of the rendering primitives) is retained in the memory space of the client, instead of the graphics library. This implies that in an immediate mode application, the lists of graphical objects to be rendered are kept by the client and are not saved by the graphics library API. The application must re-issue all drawing commands required to describe the entire scene each time a new frame is required, regardless of actual changes. This method provides on the one hand a maximum of control and flexibility to the application program, but on the other hand it also generates continuous work load on the CPU. Examples of immediate mode rendering systems include Direct2D, OpenGL and Quartz. There are some immediate mode GUIs that are particularly suitable when used in conjunction with immediate mode rendering systems. == Immediate mode primitive rendering == Primitive vertex attribute data may be inserted frame by frame into a command buffer by a rendering API. This involves significant bandwidth and processor time (especially if the graphics processing unit is on a separate bus), but may be advantageous for data generated dynamically by the CPU. It is less common since the advent of increasingly versatile shaders, with which a graphics processing unit may generate increasingly complex effects without the need for CPU intervention. == Immediate mode rendering with vertex buffers == Although drawing commands have to be re-issued for each new frame, modern systems using this method are generally able to avoid the unnecessary duplication of more memory-intensive display data by referring to that unchanging data (via indirection) (e.g. textures and vertex buffers) in the drawing commands. == Immediate mode GUI == Graphical user interfaces traditionally use retained mode-style API design, but immediate mode GUIs instead use an immediate mode-style API design, in which user code directly specifies the GUI elements to draw in the user input loop. For example, rather than having a CreateButton() function that a user would call once to instantiate a button, an immediate-mode GUI API may have a DoButton() function which should be called whenever the button should be on screen. The technique was developed by Casey Muratori in 2002. Prominent implementations include Omar Cornut's Dear ImGui in C++, Nic Barker's Clay in C and Micha Mettke's Nuklear in C.
Read more →
ACL Data Collection Initiative

The ACL Data Collection Initiative (ACL/DCI) was a project established in 1989 by the Association for Computational Linguistics (ACL) to create and distribute large text and speech corpora for computational linguistics research. The initiative aimed to address the growing need for substantial text databases that could support research in areas such as natural language processing, speech recognition, and computational linguistics. By 1993, the initiative’s activities had effectively ceased, with its functions and datasets absorbed by the Linguistic Data Consortium (LDC), which was founded in 1992. == Objectives == The ACL/DCI had several key objectives: To acquire a large and diverse text corpus from various sources To transform the collected texts into a common format based on the Standard Generalized Markup Language (SGML) To make the corpus available for scientific research at low cost with minimal restrictions To provide a common database that would allow researchers to replicate or extend published results To reduce duplication of effort among researchers in obtaining and preparing text data These objectives were designed to address the growing demand for very large amounts of text arising from applications in recognition and analysis of text and speech. Its core objective was to "oversee the acquisition and preparation of a large text corpus to be made available for scientific research at cost and without royalties". == History == By the late 1980s, researchers in computational linguistics and speech recognition faced a significant problem: the lack of large-scale, accessible text corpora for developing statistical models and testing algorithms. Existing generally available text databases were too small to meet the needs of developing applications in text and speech recognition. The initiative was formed to meet this need by collecting, standardizing, and distributing large quantities of text data with minimal restrictions for scientific research. As stated by Liberman (1990), "research workers have been severely hampered by the lack of appropriate materials, and specially by the lack of a large enough body of text on which published results can be replicated or extended by others." The ACL/DCI committee was established in February 1989. The committee included members from academic and industrial research laboratories in the United States and Europe. The initiative was chaired by Mark Liberman from the University of Pennsylvania (formerly of AT&T Bell Laboratories). Other committee members included representatives from organizations such as Bellcore, IBM T.J. Watson Research Center, Cambridge University, Virginia Polytechnic Institute & State University, Northeastern University, University of Pennsylvania, SRI International, MCC, Xerox PARC, ISSCO, and University of Pisa. The project operated initially without dedicated funding, relying on volunteer efforts from committee members and their affiliated institutions. Key supporters included AT&T Bell Labs, Bellcore, IBM, Xerox, and the University of Pennsylvania, which allowed the use of their computing facilities for ACL/DCI-related work. Previously running on volunteer effort pro bono, in 1991, it obtained funding from General Electric and the National Science Foundation (IRI-9113530). == Data == As of 1990, the ACL/DCI had collected hundreds of millions of words of diverse text. The collection included: Wall Street Journal articles (25 to 50 million words); Canadian Hansard (parliamentary records) in parallel English and French versions: cleaned-up English Hansard donated by the IBM alignment models group (100 million words), and original Bilingual Hansard (from a different time period) obtained directly (200 million words). Collins English Dictionary (1979 edition), both as fulltext (3 million words) and as various "database" versions, constructed using "typographers' tape" donated by Collins, which were computer tapes containing the structured digital data used to typeset and print the 1979 edition of the dictionary; Emails from ARPANET newsletters for the ACM Special Interest Group on Information Retrieval Forum (IRLIST) and AIList Digest issues distributed over the ARPANET (AILIST) (5 million words), both collected by Edward A. Fox at VIPSU; Articles on networking (2 million words); U.S. Department of Agriculture Extension Service Fact Sheets (>1 million words); 200,000 scientific abstracts of about 1,500 words each from the Department of Energy (25 million words); Archives of the Challenger Investigation Commission, including transcripts of depositions and hearings (2.5 million words); Books from the Library of America, including works by Mark Twain, Eugene O'Neill, Ralph Waldo Emerson, Herman Melville, W.E.B. DuBois, Willa Cather, and Benjamin Franklin (130 books, 20 million words); Public domain books like the King James Bible, Tristram Shandy, The Federalist Papers; Several million words of transcribed radiologists' reports, donated by Francis Ganong at Kurzweil Applied Intelligence Inc (about 5 million words); The Child Language Data Exchange corpus of child language acquisition transcripts; U.S. Department of Justice Justice Retrieval and Inquiry System (JURIS) materials; The Swiss Civil Code in parallel German, French and Italian; Economic reports from the Union Bank of Switzerland, in parallel English, German, French and Italian; About 12K words of administrative policy manuals and 14K words of administrative memos, contributed by Geoff Pullum of U.C.S.C.; Material from various ACM journals and the ACL journal Computational Linguistics; The CSLI publications series: 50-100 reports (8K words each) and 5-10 books (80K words each). The initiative started with North American English text but expanded to include Canadian French and planned to include Japanese, Chinese, and other Asian languages. At least 5 million words from the collection were tagged under the Penn Treebank project, and those tags were distributed by DCI as well. After DCI was absorbed by the LDC, the datasets were curated under LDC. == Format == The ACL/DCI corpus was coded in a standard form based on SGML (Standard Generalized Markup Language, ISO 8879), consistent with the recommendations of the Text Encoding Initiative (TEI), of which the DCI was an affiliated project. The TEI was a joint project of the ACL, the Association for Computers and the Humanities, and the Association for Literary and Linguistic Computing, aiming to provide a common interchange format for literary and linguistic data. The initiative planned to add annotations reflecting consensually approved linguistic features like part of speech and various aspects of syntactic and semantic structure over time. == Examples == As an example of the use of ACL/DCI, consider the Wall Street Journal (WSJ) corpus for speech recognition research. The WSJ corpus was used as the basis for the DARPA Spoken Language System (SLS) community's Continuous Speech Recognition (CSR) Corpus. The WSJ corpus became a standard benchmark for evaluating speech recognition systems and has been used in numerous research papers. The WSJ CSR Corpus provided DARPA with its first general-purpose English, large vocabulary, natural language, high perplexity corpus containing speech (400 hours) and text (47 million words) during 1987–89. The text corpus was 313 MB in size. The text was preprocessed to remove ambiguity in the word sequence that a reader might choose, ensuring that the unread text used to train language models was representative of the spoken test material. The preprocessing included converting numbers into orthographics, expanding abbreviations, resolving apostrophes and quotation marks, and marking punctuation. As another example, the Yarowsky algorithm used bitext data from DCI to train a simple word-sense disambiguation model that was competitive with advanced models trained on smaller datasets. == Distribution == Materials from the ACL/DCI collection were distributed to research groups on a non-commercial basis. By 1990, about 25 research groups and individual researchers had received tapes containing various portions of the collected material. To obtain the data, researchers had to sign an agreement not to redistribute the data or make direct commercial use of it. However, commercial application of "analytical materials" derived from the text, such as statistical tables or grammar rules, was explicitly permitted. The initiative first distributed data via 12-inch reels of 9-track tape, then via CD-ROMs. Each such tape could contain 30 million words compressed via the Lempel-Ziv algorithms. The first CD-ROM distribution was in 1991, funded by Dragon Systems Inc. It contained Collins English Dictionary, WSJ, scientific abstracts provided by the U.S. Department of Energy, and the Penn Treebank.
Read more →
SCADA Strangelove

SCADA Strangelove is an independent group of information security researchers founded in 2012, focused on security assessment of industrial control systems (ICS) and SCADA. == Activities == Main fields of research include: Discovery of 0-day vulnerabilities in cyber physical systems and coordinated vulnerability disclosure; Security assessment of ICS protocols and development suites; Identification of publicly Internet-connected ICS components and secure it with help of proper authorities; Development of security hardening guides for ICS software; Mapping cybersecurity on to functional safety; Awareness control and delivery of information regarding the actual security state of ICS systems. SCADA Strangelove's interests expand further than classic ICS components and covers various embedded systems, however, and encompass smart home components, solar panels, wind turbines, SmartGrid as well as other areas. == Projects == Group members have and continue to develop and publish numerous open source tools for scanning, fingerprinting, security evaluation and password bruteforcing for ICS devices. These devices work over industrial protocols such as modbus, Siemens S7, MMS, ISO EC 60870, ProfiNet. In 2014 Shodan used some of the published tools for building a map of ICS devices which is publicly available on the Internet. Open source security assessment frameworks, such as THC Hydra, Metasploit, and DigitalBond Redpoint have used Shodan-developed tools and techniques. The group has published security-hardening guidelines for industrial solutions based on Siemens SIMATIC WinCC and WinCC Flexible. The guidelines contain detailed security configuration walk-throughs, descriptions of internal security features and appropriate best practices. Among the group’s more noticeable projects is Choo Choo PWN (CCP) also named the Critical Infrastructure Attack (CIA). This is an interactive laboratory built upon ICS software and hardware used in real world. Every system is connected to a toy city infrastructure, which includes factories, railroads and other facilities. The laboratory has been demonstrated at various conferences including PHDays, Power of Community, and 30C3. Primarily the laboratory is used for the discovery of new vulnerabilities and for evaluation of security mechanisms, however it is also used for workshops and other educational activities. At Positive Hack Days IV, contestants found several 0-day vulnerabilities in Indusoft Web Studio 7.1 by Schneider Electric, and in specific ICS hardware RTU PET-7000 during the ICS vulnerability discovery challenge. The group supports Secure Open SmartGrid (SCADASOS) project to find and fix vulnerabilities in intellectual power grid components such as photovoltaic power station, wind turbine, power inverter. More than 80 000 industrial devices were discovered and isolated from the Internet in 2015. == Appearances == Group members are frequently seen presenting at conferences like CCC, SCADA Security Scientific Symposium, Positive Hack Days. Most notable talks are: === 29C3 === An overview of vulnerabilities discovered in the widely distributed Siemens SIMATIC WinCC software and tools that are implemented for searching ICS on the Internet. === PHDays === This talk consisted of an overview of vulnerabilities discovered in various systems produced by ABB, Emerson, Honeywell and Siemens and was presented at PHDays III and PHDays IV. === Confidence 2014 === Implications of security research aimed at realization of various industrial network protocols Profinet, Modbus, DNP3, IEC 61850-8-1 (MMS), IEC (International Electrotechnical Commission) 61870-5-101/104, FTE (Fault Tolerant Ethernet), Siemens S7. === PacSec 2014 === Presentations of security research showing the impact of radio and 3G/4G networks on the security of mobile devices as well as on industrial equipment. === 31C3 === Analysis of security architecture and implementation of the most wide spread platforms for wind and solar energy generation which produce many gigawatts of it. === 32C3 === Cybersecurity assessment of railway signaling systems such as Automatic Train Control (ATC), Computer-based interlocking (CBI) and European Train Control System (ETCS). === China Internet Security Conference 2016 === In "Greater China Cyber Threat Landscape" keynote by Sergey Gordeychik an overview of vulnerabilities, attacks and cyber-security incidents in Greater China region was presented. === Recon 2017 === In talk "Hopeless: Relay Protection for Substation Automation" by Kirill Nesterov and Alexander Tlyapov security analysis results of key Digital Substation component - Relay Protection Terminals was presented. Vulnerabilities, including remote code execution in Siemens SIPROTEC, General Electric Line Distance Relay, NARI and ABB protective relays was presented. == Philosophy == All names, catchwords and graphical elements refer to Stanley Kubrick’s film, Dr. Strangelove. In their talks, group members often refer to Cold War events such as the Caribbean Crisis, and draw parallels between nuclear arms race and the current escalation of cyberwar. Group members follow the approach of “responsible disclosure” and “ready to wait for years, while vendor is patching the vulnerability”. Public exploits for discovered vulnerabilities are not published. This is on account of the longevity of ICS and by implication the long process of patching ICS. However, conflicts still happen, notably in 2012 when the talk at DEF CON was called off due to a dispute of persistent weaknesses in Siemens industrial software.
Read more →
User-defined function

A user-defined function (UDF) is a function provided by the user of a program or environment, in a context where the usual assumption is that functions are built into the program or environment. UDFs are usually written for the requirement of its creator. == BASIC language == In some old implementations of the BASIC programming language, user-defined functions are defined using the "DEF FN" syntax. More modern dialects of BASIC are influenced by the structured programming paradigm, where most or all of the code is written as user-defined functions or procedures, and the concept becomes practically redundant. == COBOL language == In the COBOL programming language, a user-defined function is an entity that is defined by the user by specifying a FUNCTION-ID paragraph. A user-defined function must return a value by specifying the RETURNING phrase of the procedure division header and they are invoked using the function-identifier syntax. See the ISO/IEC 1989:2014 Programming Language COBOL standard for details. As of May 2022, the IBM Enterprise COBOL for z/OS 6.4 (IBM COBOL) compiler contains support for user-defined functions. == Databases == In relational database management systems, a user-defined function provides a mechanism for extending the functionality of the database server by adding a function, that can be evaluated in standard query language (usually SQL) statements. The SQL standard distinguishes between scalar and table functions. A scalar function returns only a single value (or NULL), whereas a table function returns a (relational) table comprising zero or more rows, each row with one or more columns. User-defined functions in SQL are declared using the CREATE FUNCTION statement. For example, a user-defined function that converts Celsius to Fahrenheit (a temperature scale used in USA) might be declared like this: Once created, a user-defined function may be used in expressions in SQL statements. For example, it can be invoked where most other intrinsic functions are allowed. This also includes SELECT statements, where the function can be used against data stored in tables in the database. Conceptually, the function is evaluated once per row in such usage. For example, assume a table named Elements, with a row for each known chemical element. The table has a column named BoilingPoint for the boiling point of that element, in Celsius. The query would retrieve the name and the boiling point from each row. It invokes the CtoF user-defined function as declared above in order to convert the value in the column to a value in Fahrenheit. Each user-defined function carries certain properties or characteristics. The SQL standard defines the following properties: Language - defines the programming language in which the user-defined function is implemented; examples include SQL, C, C# and Java. Parameter style - defines the conventions that are used to pass the function parameters and results between the implementation of the function and the database system (only applicable if language is not SQL). Specific name - a name for the function that is unique within the database. Note that the function name does not have to be unique, considering overloaded functions. Some SQL implementations require that function names are unique within a database, and overloaded functions are not allowed. Determinism - specifies whether the function is deterministic or not. The determinism characteristic has an influence on the query optimizer when compiling a SQL statement. SQL-data access - tells the database management system whether the function contains no SQL statements (NO SQL), contains SQL statements but does not access any tables or views (CONTAINS SQL), reads data from tables or views (READS SQL DATA), or actually modifies data in the database (MODIFIES SQL DATA). User-defined functions should not be confused with stored procedures. Stored procedures allow the user to group a set of SQL commands. A procedure can accept parameters and execute its SQL statements depending on those parameters. A procedure is not an expression and, thus, cannot be used like user-defined functions. Some database management systems allow the creation of user defined functions in languages other than SQL. Microsoft SQL Server, for example, allows the user to use .NET languages including C# for this purpose. DB2 and Oracle support user-defined functions written in C or Java programming languages. === SQL Server 2000 === There are three types of UDF in Microsoft SQL Server 2000: scalar functions, inline table-valued functions, and multistatement table-valued functions. Scalar functions return a single data value (not a table) with RETURNS clause. Scalar functions can use all scalar data types, with exception of timestamp and user-defined data types. Inline table-valued functions return the result set of a single SELECT statement. Multistatement table-valued functions return a table, which was built with many TRANSACT-SQL statements. User-defined functions can be invoked from a query like built‑in functions such as OBJECT_ID, LEN, DATEDIFF, or can be executed through an EXECUTE statement like stored procedures. Performance Notes: User-defined functions are subroutines made of one or more Transact-SQL statements that can be used to encapsulate code for reuse. It takes zero or more arguments and evaluates a return value. Has both control-flow and DML statements in its body similar to stored procedures. Does not allow changes to any Global Session State, like modifications to database or external resource, such as a file or network. Does not support output parameter. DEFAULT keyword must be specified to pass the default value of parameter. Errors in UDF cause UDF to abort which, in turn, aborts the statement that invoked the UDF. === Apache Hive === Apache Hive defines, in addition to the regular user-defined functions (UDF), also user-defined aggregate functions (UDAF) and table-generating functions (UDTF). Hive enables developers to create their own custom functions with Java. === Apache Doris === Apache Doris, an open-source real-time analytical database, allows external users to contribute their own UDFs written in C++ to it.
Read more →
JustWatch

JustWatch is a website that provides information on the availability of films and TV shows on various streaming platforms such as Netflix, HBO Max, Disney+, Hulu, Peacock, Fandango at Home, Apple TV, and Amazon Prime Video, among others. It is also available as a mobile application and smart TV application. JustWatch provides a search engine that allows users to discover which digital platforms host a particular movie or TV series. As of November 2023, JustWatch is available to users in 139 countries. == Features == JustWatch functions as a search engine by aggregating information about the online availability of films and TV series from video-on-demand streaming services. It aggregates information from more than 100 video content libraries, as well providing information about video resolution quality, pricing, and purchase or rental options. The website includes various filters for searching, including genre, price, release date, rating, and popularity. Users are also able to create lists of shows and movies and to share these lists with other users. == History == JustWatch GmbH is an international database company that is privately held and headquartered in Berlin, Germany. The company specializes in the online availability of movies and TV series. In addition to its user-facing website, the company also has an advertising-focused arm, JustWatch Media, that works with corporate clients, using data about what people watch that it gleans from user behavior to help entertainment companies tailor their marketing strategies. Its clients include Universal Pictures, Paramount Pictures, and Sony Pictures, among others. Development of the website began in 2014, and it was launched in the U.S. and Germany in February 2015. In 2018, the company received funding to improve databases within the European Union. In December 2019, the company acquired a rival streaming aggregation service, GoWatchIt, from Plexus Entertainment. JustWatch also used the acquisition to open its first New York office. In 2019, JustWatch had over 30 million users across 38 countries. By 2020, the company's streaming aggregation service was available in over 45 countries. By November 2023, it was available in 139 countries, and had over 40 million monthly users. === Founding === JustWatch was co-founded in 2013 by David Croyé, Cristoph Hoyer, Kevin Hiller, Dominik Raute, Ingke Weimert, and Michael Wilken. In a company blog post from February 2017, Croyé described the group of co-founders as all having previously "worked in leading roles at successful international tech-startups in Berlin." Croyé, who currently holds the title of CEO at JustWatch GmbH, had previously worked as the chief marketing officer at kaufDA, a European location-based mobile coupon and promotion service, and the background of other co-founders included time at the adtech company Trademob and the streaming site MyVideo. Startup capital for the website initially came from the founders themselves. Croyé in particular was able to reinvest funds he had obtained from the sale of kaufDA to Axel Springer, a European media company, in March 2011. Since 2015, the company has had at least one additional round of seed funding, with investors including venture capital groups CG Partners and STS Ventures.
Read more →
Naked Objects for .NET

Naked Objects for .NET or Naked Objects MVC is a software framework that builds upon the ASP.NET MVC framework. As the name suggests, the framework synthesizes two architectural patterns: naked objects and model–view–controller (MVC). These two patterns have been considered as antithetical. However, Trygve Reenskaug (the inventor of the MVC pattern) has made it clear that he does not see it that way, in his foreword to Richard Pawson's PhD thesis on the Naked Objects pattern. The Naked Objects MVC framework will take a domain model (written as Plain Old CLR Objects) and render it as a complete HTML application without the need for writing any user interface code - by means of a small set of generic View and Controller classes. The framework uses reflection rather than code generation. The developer may then choose to create customised Views and/or Controllers, using standard ASP.NET MVC patterns, for use where the generic user interface is not suitable.
Read more →
Materialized view

In computing, a materialized view is a database object that contains the results of a query. For example, it may be a local copy of data located remotely, or may be a subset of the rows and/or columns of a table or join result, or may be a summary using an aggregate function. The process of setting up a materialized view is sometimes called materialization. This is a form of caching the results of a query, similar to memoization of the value of a function in functional languages, and it is sometimes described as a form of precomputation. As with other forms of precomputation, database users typically use materialized views for performance reasons, i.e. as a form of optimization. Materialized views that store data based on remote tables were also known as snapshots (deprecated Oracle terminology). In any database management system following the relational model, a view is a virtual table representing the result of a database query. Whenever a query or an update addresses an ordinary view's virtual table, the DBMS converts these into queries or updates against the underlying base tables. A materialized view takes a different approach: the query result is cached as a concrete ("materialized") table (rather than a view as such) that may be updated from the original base tables from time to time. This enables much more efficient access, at the cost of extra storage and of some data being potentially out-of-date. Materialized views find use especially in data warehousing scenarios, where frequent queries of the actual base tables can be expensive. In a materialized view, indexes can be built on any column. In contrast, in a normal view, it's typically only possible to exploit indexes on columns that come directly from (or have a mapping to) indexed columns in the base tables; often this functionality is not offered at all. == Implementations == === Oracle === Materialized views were implemented first by the Oracle Database: the Query rewrite feature was added from version 8i. Example syntax to create a materialized view in Oracle: === PostgreSQL === In PostgreSQL, version 9.3 and newer natively support materialized views. In version 9.3, a materialized view is not auto-refreshed, and is populated only at time of creation (unless WITH NO DATA is used). It may be refreshed later manually using REFRESH MATERIALIZED VIEW. In version 9.4, the refresh may be concurrent with selects on the materialized view if CONCURRENTLY is used. Example syntax to create a materialized view in PostgreSQL: === SQL Server === Microsoft SQL Server differs from other RDBMS by the way of implementing materialized view via a concept known as "Indexed Views". The main difference is that such views do not require a refresh because they are in fact always synchronized to the original data of the tables that compound the view. To achieve this, it is necessary that the lines of origin and destination are "deterministic" in their mapping, which limits the types of possible queries to do this. This mechanism has been realised since the 2000 version of SQL Server. Example syntax to create a materialized view in SQL Server: === Stream processing frameworks === Apache Kafka (since v0.10.2), Apache Spark (since v2.0), Apache Flink, Kinetica DB, Materialize, RisingWave, and Epsio all support materialized views on streams of data. === Others === Materialized views are also supported in Sybase SQL Anywhere. In IBM Db2, they are called "materialized query tables". ClickHouse supports materialized views that automatically refresh on merges. MySQL doesn't support materialized views natively, but workarounds can be implemented by using triggers or stored procedures or by using the open-source application Flexviews. Materialized views can be implemented in Amazon DynamoDB using data modification events captured by DynamoDB Streams. Google announced in 8 April 2020 the availability of materialized views for BigQuery as a beta release.
Read more →
Zero-day vulnerability

A zero-day (also known as a 0-day) is a vulnerability or security hole in a computer system unknown to its developers or anyone capable of mitigating it. Until the vulnerability is remedied, threat actors can exploit it in a zero-day exploit, or zero-day attack. The term "zero-day" originally referred to the number of days since a new piece of software was released to the public, so "zero-day software" was obtained by hacking into a developer's computer before release. Eventually the term was applied to the vulnerabilities that allowed this hacking, and to the number of days that the vendor has had to fix them. Vendors who discover the vulnerability may create patches or advise workarounds to mitigate it, though users need to deploy that mitigation to eliminate the vulnerability in their systems. Zero-day attacks are severe threats. == Definition == Despite developers' goal of delivering a product that works entirely as intended, virtually all products contain software and hardware bugs. If a bug creates a security risk, it is called a vulnerability. Vulnerabilities vary in their ability to be exploited by malicious actors. Some are not usable at all, while others can be used to disrupt the device with a denial of service attack. The most dangerous allow the attacker to inject and run their own code, without the user being aware of it. Although the term "zero-day" initially referred to the time since the vendor had become aware of the vulnerability, zero-day vulnerabilities can also be defined as the subset of vulnerabilities for which no patch or other fix is available. A zero-day exploit is any exploit that takes advantage of such a vulnerability. == Exploits == An exploit is the delivery mechanism that takes advantage of the vulnerability to penetrate the target's systems, for such purposes as disrupting operations, installing malware, or exfiltrating data. Researchers Lillian Ablon and Andy Bogart write that "little is known about the true extent, use, benefit, and harm of zero-day exploits". Exploits based on zero-day vulnerabilities are considered more dangerous than those that take advantage of a known vulnerability. However, it is likely that most cyberattacks use known vulnerabilities, not zero-days. Governments of states are the primary users of zero-day exploits, not only because of the high cost of finding or buying vulnerabilities, but also the significant cost of writing the attack software. Nevertheless, anyone can use a vulnerability, and according to research by the RAND Corporation, "any serious attacker can always get an affordable zero-day for almost any target". Many targeted attacks and most advanced persistent threats rely on zero-day vulnerabilities. In 2017, the average time to develop an exploit from a zero-day vulnerability was estimated at 22 days. The difficulty of developing exploits has been increasing over time due to increased anti-exploitation features in popular software. === Window of vulnerability === Zero-day vulnerabilities are often classified as alive—meaning that there is no public knowledge of the vulnerability—and dead—the vulnerability has been disclosed, but not patched. If the software's maintainers are actively searching for vulnerabilities, it is a living vulnerability; such vulnerabilities in unmaintained software are called immortal. Zombie vulnerabilities can be exploited in older versions of the software but have been patched in newer versions. Even publicly known and zombie vulnerabilities are often exploitable for an extended period. Security patches can take months to develop, or may never be developed. A patch can have negative effects on the functionality of software and users may need to test the patch to confirm functionality and compatibility. Larger organizations may fail to identify and patch all dependencies, while smaller enterprises and personal users may not install patches. Research suggests that risk of cyberattack increases if the vulnerability is made publicly known or a patch is released. Cybercriminals can reverse engineer the patch to find the underlying vulnerability and develop exploits, often faster than users install the patch. According to research by RAND Corporation published in 2017, zero-day exploits remain usable for 6.9 years on average, although those purchased from a third party only remain usable for 1.4 years on average. The researchers were unable to determine if any particular platform or software (such as open-source software) had any relationship to the life expectancy of a zero-day vulnerability. Although the RAND researchers found that 5.7 percent of a stockpile of secret zero-day vulnerabilities will have been discovered by someone else within a year, another study found a higher overlap rate, as high as 10.8 percent to 21.9 percent per year. == Countermeasures == Because, by definition, there is no patch that can block a zero-day exploit, all systems employing the software or hardware with the vulnerability are at risk. This includes secure systems such as banks and governments that have all patches up to date. Security systems are designed around known vulnerabilities, and repeated exploitations of a zero-day exploit could continue undetected for an extended period of time. Although there have been many proposals for a system that is effective at detecting zero-day exploits, this remains an active area of research in 2023. Many organizations have adopted defense-in-depth tactics so that attacks are likely to require breaching multiple levels of security, which makes it more difficult to achieve. Conventional cybersecurity measures such as training and access control — including multi-factor authentication, least-privilege access, and air-gapping makes it harder to compromise systems with a zero-day exploit. Since writing perfectly secure software is impossible, some researchers argue that driving up the cost of exploits is considered a good strategy to reduce the burden of cyberattacks. == Market == Zero-day exploits can fetch millions of dollars. There are three main types of buyers: White: the vendor, or to third parties such as the Zero Day Initiative that disclose to the vendor. Often such disclosure is in exchange for a bug bounty. Not all companies respond positively to disclosures, as they can cause legal liability and operational overhead. It is not uncommon to receive cease-and-desist letters from software vendors after disclosing a vulnerability for free. Gray: the largest and most lucrative. Government or intelligence agencies buy zero-days and may use it in an attack, stockpile the vulnerability, or notify the vendor. The United States federal government is one of the largest buyers. As of 2013, the Five Eyes (United States, United Kingdom, Canada, Australia, and New Zealand) captured the plurality of the market and other significant purchasers included Russia, India, Brazil, Malaysia, Singapore, North Korea, and Iran. Middle Eastern countries were poised to become the biggest spenders. Black: organized crime, which typically prefers exploit software rather than just knowledge of a vulnerability. These users are more likely to employ "half-days" where a patch is already available. In 2015, the markets for government and crime were estimated at least ten times larger than the white market. Sellers are often hacker groups that seek out vulnerabilities in widely used software for financial reward. Some will only sell to certain buyers, while others will sell to anyone. White market sellers are more likely to be motivated by non pecuniary rewards such as recognition and intellectual challenge. Selling zero-day exploits is legal. Despite calls for more regulation, law professor Mailyn Fidler says there is little chance of an international agreement because key players such as Russia and Israel are not interested. The sellers and buyers that trade in zero-days tend to be secretive, relying on non-disclosure agreements and classified information laws to keep the exploits secret. If the vulnerability becomes known, it can be patched and its value consequently crashes. Because the market lacks transparency, it can be hard for parties to find a fair price. Sellers might not be paid if the vulnerability was disclosed before it was verified, or if the buyer declined to purchase it but used it anyway. With the proliferation of middlemen, sellers could never know to what use the exploits could be put. Buyers could not guarantee that the exploit was not sold to another party. Both buyers and sellers advertise on the dark web. Research published in 2022 based on maximum prices paid as quoted by a single exploit broker found a 44 percent annualized inflation rate in exploit pricing. Remote zero-click exploits could fetch the highest price, while those that require local access to the device are much cheaper. Vulnerabilities in widely used software are also more expensive. They estimated that around 400 to 1,500 people sold exploits to th
Read more →