AI Code Fixer

AI Code Fixer — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

• 

  Crucible (software)

  Crucible is a collaborative code review application by Australian software company Atlassian. Like other Atlassian products, Crucible is a Web-based application primarily aimed at enterprise, and certain features that enable peer review of a codebase may be considered enterprise social software. Crucible is particularly tailored to remote workers, and facilitates asynchronous review and commenting on code. Crucible also integrates with popular source control tools, such as Git and Subversion. Crucible is not open source, but customers are allowed to view and modify the code for their own use.

  Read more →
• 

  MicroTCA

  MicroTCA (short for Micro Telecommunications Computing Architecture, also: μTCA) is a modular, open standard, created and maintained by the PCI Industrial Computer Manufacturers Group (PICMG). It provides the electrical, mechanical, thermal and management specifications to create a switched fabric computer system, using Advanced Mezzanine Cards (AMC), connected directly to a backplane. MicroTCA is a descendant of the AdvancedTCA standard. == History == The rapid expansion of mobile telecommunications and their associated services (such as text messages) at the beginning of the millennium increased the demand of processing power in telecommunication systems. The existing "carrier grade" (see RAS) computing architectures were not fit to house the high performance processors of the time. In order to answer those demands, about 100 companies worked together in PICMG, resulting in the Advanced Telecommunications Architecture (AdvancedTCA, ATCA), published in 2002. After the introduction of AdvancedTCA, a standard was developed, to cater towards smaller telecommunications systems at the edge of the network. This standard was geared towards a more compact, less expensive systems, without cutting back on reliability or data throughput. This standard, called MicroTCA, was ratified 2006. MicroTCA systems migrated after its release into non-telecommunication sectors, like defence, avionics and science. This resulted in extensions to the base-standard, called modules. == Modules == === MicroTCA.0 === The base-specification for properties common to all other modules, ratified July 6, 2006. This includes: Mechanical specifications, like possible dimensions of card cages, backplanes and supported AMC-modules Electrical specifications, like power distribution and interface layout Thermal specifications, like possible cooling layouts or available cooling power Management specifications A second revision of the base-specifications was ratified January 16, 2020, containing some corrections, as well as alterations, necessary to implement higher speed Ethernet fabrics, like 10GBASE-KR and 40GBASE-KR4. === MicroTCA.1 === This module adds specifications for ruggedized systems, using forced air for cooling. Possible scenarios for MicroTCA.1-based systems include outside plant telecom, industrial and aerospace environments === MicroTCA.2 === This module adds specifications for more stringent requirements with regards to temperature, shock, vibration and other environmental conditions. These specifications are geared towards use in outside plant telecom, machine and transport industry, as well as military airborne, shipboard and ground mobile equipment. MicroTCA.2 allows the use of air- and conduction-cooled AMC-modules. === MicroTCA.3 === This module adds specifications for even more stringent requirements with regards to temperature, shock, vibration and other environmental conditions. These specifications are geared towards use in outside plant telecom, machine and transport industry, as well as military airborne, shipboard and ground mobile equipment. MicroTCA.3 requires the use of conduction-cooled AMC-modules. === MicroTCA.4 === This module extends the AMC with a Rear Transition Module (RTM), increasing PCB-space and modularity. AMC and RTM are connected with a connector, located in zone 3, defined in MicroTCA.0. These specifications are geared towards use in large-scale scientific devices, like particle accelerators or telescopes. == Components of MicroTCA == === Card Cage === The card cage (also: shelf, crate) houses all the other components and as such has two primary functions: Provide mechanical stability to the other components Ensure sufficient cooling There exist a wide array of card cages. They usually differ in: the type of modules they support (MTCA.0, MTCA.1, ...) the number of slots they provide (typically between 2 and 12) the architecture of the installed backplane (see below) the cooling scheme they use (i.e. airflow front-to-back, bottom-to-top, side-to-side, conductive,...) === Backplane === The backplane is a printed circuit board, mounted directly into the card cage. It connects all other components of a MicroTCA system to each other and provides power, data access and management access to them. Two types of power are distributed over the backplane, Management Power (+3.3 V) and Payload Power (+12 V). Unlike typical backplanes, where power is distributed to all components via a common "powerplane" in the PCB, on a MicroTCA backplane, Management and Payload Power are distributed to each component individually. While Management Power is provided to each module connected to a powered backplane, Payload Power has to be granted by the MicroTCA Carrier Hub (MCH), after ensuring that the module is MicroTCA-compatible. The standard defines various communication buses, which the backplane can/should provide: Gigabit Ethernet IPMI SATA Fat pipe (can be used for PCIe, SRIO or 10G/40G Ethernet) Point to Point Links Clocks JTAG === Cooling Unit === The Cooling Unit (CU) provides controlled air flow in air-flow-cooled card cages. It usually consists of an array of fans and a controller, which is connected to the backplane. The MicroTCA Carrier Hub (MCH) can read-out temperature sensors (if present) and fan speed, as well as change fan speed via IPMI. The Cooling Unit is usually fitted to a specific card cage. Some CUs are easily detachable (i.e. for cleaning or replacement), while other card cages come with integrated, non-detachable CUs. === Power Module === The Power Module (PM, also: Power Supply) converts the AC power from the power line to the +3.3 V Management Power (MP) and +12 V Payload Power (PP), both of which are DC. There exist a variety of power modules, which differ in: form factor (i.e. double width, single width) input voltage (110 V, 220 V, both) output power (i.e. 600 W, 1000 W) The power module senses the presence of a module in a slot via a specified pin in the module connector, and immediately provides that module with management power. Payload power is managed by the MicroTCA Carrier Hub (MCH), which communicates with the power module via IPMI. The power module uses its own type of connector, and can thus only be installed into designated slots, which in turn can't carry any other type of module. Some card cages provide an additional power module slot for redundancy. In such a case, one slot is the primary, which will provide power by default, and the other one is secondary, providing power only, if the primary does not. === MicroTCA Carrier Hub === The MicroTCA Carrier Hub (MCH) is the central managing device of a MicroTCA card cage. It manages power distribution and cooling. It usually also provides Gigabit Ethernet and/or PCIe/Serial RapidIO switching. Some MCHs additionally provide clocking. As the name indicates, they are the hub of various star topologies (i.e. for Ethernet, PCIe) on the backplane and thus require dedicated slot(s). Some backplanes support two MCHs for redundancy. In this case there are two MCH slots, with one being designated primary, and one secondary. === Advanced Mezzanine Card === Advanced Mezzanine Card (AMC) is a standard for hot-pluggable PCBs. It was originally developed to be used in AdvancedTCA systems. The standard specifies: the dimensions of the PCB with two width variants (single, double) and three height variants (Compact, Mid-size, Full) type, location and orientation of connectors (i.e. Zone 1, 2, 3) There is a huge variation of functionalities, an AMC can fulfill: Computing (i.e. a module with CPU, RAM, SSD and on-board graphics) Storage (i.e. SSD carrier) Graphics card FPGA card (i.e. for signal processing) FMC carrier Digitizer card (Analog-Digital and Digital-Analog Conversion) Clocking and Triggering and others === Rear Transition Module (MTCA.4 only) === The Rear Transition Module (RTM) was added in the MicroTCA.4 standard. It is connected directly to an AMC via a connector, located in zone 3, requiring a double width AMC and RTM. An RTM has about the same dimensions, as an AMC, basically doubling the available PCB-space per slot in an MTCA.4 card cage. Its power is provided by the AMC. Thus an RTM can not operate on its own, but requires a paired AMC. The zone 3 connector is electrically free configurable, making it possible, that a mechanically fitting AMC-RTM pair is electrically incompatible. To avoid damage due to that incompatibility, a mechanical code-pin was added to MTCA.4-compatible AMCs and RTMs, mechanically preventing the installation of an electrically incompatible RTM to an AMC. The functionality of RTMs includes, but is not limited to: RF-signal pre-/post-processing (i.e. filtering, Up-/Down-conversion, Vector De-/Modulation) Digital signal pre-/post-processing Clock-generation/-distribution Device interfaces Date storage CPU (only MCH-RTM)

  Read more →
• 

  Matt Mullenweg

  Matthew Charles Mullenweg (born January 11, 1984) is an American web developer and entrepreneur. He is known as a co-founder of the free and open-source web publishing software WordPress, and the founder of Automattic. == Early life and education == Mullenweg was born January 11, 1984, in Houston, Texas, to Chuck and Kathleen Mullenweg and grew up in the Willowbend neighborhood. His older sister was born in 1974. His father, who died in 2016, was a computer programmer who worked for Brown & Root, and encouraged his children to start using home computers at an early age. His mother was a stay-at-home mother. The Mullenwegs were raised Catholic. He attended Kinder High School for the Performing and Visual Arts, studying jazz and playing the saxophone. Mullenweg suffered from migraines as a child that forced him to miss extended periods of school. He attended the University of Houston for two years, studying philosophy and political science. He dropped out after his sophomore year in 2004 to work for CNET, which promised him that he could allocate time to the development of WordPress. == Career == Mullenweg began blogging in 2002 on the open source platform b2. B2 developer Michael Valdrighi abandoned the project and Mullenweg took it over in 2003. He and Mike Little created a b2 fork that year they called WordPress and published it under the GNU General Public License. In March 2003, he co-founded the Global Multimedia Protocols Group (GMPG) with Eric A. Meyer and Tantek Çelik. In April 2004, he helped launch Ping-O-Matic, a mechanism for notifying search engines about blog updates. In October 2004, he was hired by CNET who would allow him to develop WordPress part-time as part of his job. He dropped out of college and moved to San Francisco for the position. === Automattic === After leaving CNET in 2005, Mullenweg founded Automattic as a fully distributed company. Toni Schneider was hired as CEO so Mullenweg could learn how to manage a large organization. During this period, Mullenweg focused on product development while Schneider managed the company. In January 2014, Mullenweg resumed the role of CEO, replacing Schneider. He led Automattic's expansion and a series of acquisitions, including WooCommerce in 2015, The Atavist Magazine in 2018, Tumblr in 2019, Pocket Casts in 2021, and Beeper in 2024. Mullenweg received the Heinz Award for Technology, the Economy and Employment in 2016, for "helping to democratize online publishing". Automattic's valuation reached $7.5 billion in 2021. At the time, WordPress hosted 28 million websites, or 40 percent of all websites on the Internet. == Public disputes == On several occasions, Mullenweg has publicly challenged competitors to WordPress and WordPress.com. He has stated that he prefers to settle disputes in the court of public opinion and described his approach as "brinksmanship", noting that the potential cost of legal action could put Automattic in a "tough spot". In 2008, shortly before WordPress 2.5's release, Six Apart's Movable Type published "A WordPress 2.5 Upgrade Guide"—a comparison of their CMS with their rival, WordPress—as a company blog article that Mullenweg characterized as "desperate and dirty". In 2013, developers on the digital marketplace Envato were banned from speaking at WordPress events after he criticized the platform for selling WordPress themes with the graphics and CSS components under a proprietary license instead of the GPL. In 2016, Mullenweg accused Wix.com, a competitor to WordPress.com, of reusing WordPress's mobile text editor code in Wix's own mobile app without adhering to the terms of the GPL. Despite the license's requirement to publish anything built with GPL code under the GPL, Wix's CEO claimed that the company open-sourced their forked version of the component and satisfied the license's terms before the app switched to its own fork of the MIT-licensed text editor that the WordPress editor was based upon. The new fork added a clause to the MIT license that forbids redistribution under any other license. In 2022, Mullenweg criticized GoDaddy for not reinvesting in the WordPress project sufficiently. On January 9, 2025, the representative of the WordPress Sustainability team, Thijs Buijs, resigned via WordPress.org’s Slack channel, citing dissatisfaction with Matt Mullenweg’s December 24, 2024, Reddit post titled “What drama should I create in 2025?” highlighting concerns about what he described as “unsustainable leadership”. In response, Matt Mullenweg thanked Thijs Buijs for reminding him of the existence of a sustainability team, announced its disbanding, and subsequently closed Wordpress.org's #sustainability Slack channel. === Tumblr === Mullenweg began a three-month sabbatical from his role as CEO at the beginning of February 2024. During that time, Mullenweg engaged in a public feud with a transgender Tumblr user who, frustrated with the failure of Tumblr (owned by Automattic) to address transphobic harassment, posted that she wished Mullenweg would die in a comedic way. The user was subsequently banned. Responding to user uproar, Mullenweg addressed the ban in posts on his personal Tumblr blog, in which he characterized the post as a death threat, and shared private account information about the user. Mullenweg also responded to individual commenters on Tumblr in posts and direct messages, and went to Twitter to respond to the banned user's tweets about the situation. A few days later, transgender employees of Tumblr and Automattic made a post on the official Tumblr staff blog characterizing his response as "unwarranted and harmful" and stating that he did not speak on their behalf. They also said that the user's post was not a realistic threat of violence and not the reason for her ban. === WP Engine dispute === == Audrey Capital == Mullenweg is a principal at angel investment firm Audrey Capital, which he co-founded in 2008 alongside Naveen Selvadurai and Audrey Kim. As of 2024, the company lists investments in companies such as CoinDesk, MakerBot, Sonos, SpaceX, Ring, as well as software companies including Calm, Chartbeat, DailyBurn, Memrise, Genius, Nord Security and Telegram. It has also funded startups that provide services to web developers including Creative Market, GitLab, NPM, SendGrid, Stripe and Typekit. From 2017 to 2019, Mullenweg also served as a board member for GitLab. Mullenweg has employed a team of contributors to WordPress through Audrey Capital since 2010, who work separately from Automattic. On the 20th anniversary of WordPress' initial release, Mullenweg announced a scholarship program aimed at the children of significant contributors to open-source projects.

  Read more →
• 

  Verge3D

  Verge3D is a real-time renderer and a toolkit used for creating interactive 3D experiences running on websites. == Overview == Verge3D enables users to convert content from 3D modelling tools (Blender, 3ds Max, and Maya are currently supported) to view in a web browser. Verge3D was created by the same core group of software engineers that previously created the Blend4Web framework. == Features == Verge3D uses WebGL for rendering. It incorporates components of the Three.js library and exposes its API to application developers. Puzzles Application functionality can be added via JavaScript, either by writing code directly or by using Puzzles, Verge3D’s visual programming environment based on Google Blockly. Puzzles is aimed primarily at non-programmers allowing quick creation of interactive scenarios in a drag-and-drop fashion. App Manager and web publishing App Manager is a lightweight web-based tool for creating, managing and publishing Verge3D projects, running on top of the local development server. Verge3D Network service integrated in the App Manager allows for publishing Verge3D applications via Amazon S3 and EC2 cloud services. PBR For purposes of authoring materials, a glTF 2.0-compliant physically based rendering pipeline is offered alongside the standard shader-based approach. PBR textures can be authored using external texturing software such as Substance Painter for which Verge3D offers the corresponding export preset. Besides the glTF 2.0 model, Verge3D supports physical materials of 3ds Max and Maya (with Autodesk Arnold as reference), and Blender's real-time Eevee materials. glTF and DCC software integration Verge3D integrates directly with Blender, 3ds Max, and Maya, enabling users to create 3D geometry, materials, and animations inside the software, then export them in the JSON-based glTF format. The Sneak Peek feature allows for exporting and viewing scenes from the DCC tool environment. Facebook 3D posts For Facebook publishing, Verge3D offers a specific GLB export option. The exported GLB files are displayed and can be opened in the App Manager. Asset compression Exported files can optionally use LZMA compression, resulting in a reduction in file size of up to 6x. UI and website layouts Interface layouts, created using external WYSIWYG editors, can be linked with Puzzles to trigger changes to a 3D scene being rendered in the browser and vice versa. Animation Verge3D supports skeletal animation, including animation of bipeds and character rigs, and allows for animation of material parameters. Model parts can also be set up to be dragged by the user. Physics The physics module can be linked separately to enable collision detection, dynamically moving objects, support for characters and vehicles, springs, ropes and cloth simulation. As of version 2.11, simple physics simulations can be created and controlled without coding via Puzzles, the visual programming system used by Verge3D. AR/VR The 2.10 update added support for WebXR, an in-development open technology designed to enable virtual reality and augmented reality experiences to be displayed in web browsers. It works with both headsets with controllers, like the HTC Vive and Oculus Rift, and those without, like Google Cardboard. AR/VR experiences can enabled via Puzzles or JavaScript. == Workflow == Verge3D's workflow differs substantially from other mainstream WebGL frameworks. Development of a new Verge3D application is usually started from modeling, texturing and animating 3D objects. The models are assembled in the 3D authoring tool. The scene file is then used as a basis for a Verge3D project initialized from the App Manager. An interactive scenario is optionally added using the Puzzles editor. A Verge3D application can be previewed in the web browser at any development stage using the App Manager. The finished web application can be deployed on the Verge3D Network, on Facebook or on the user's website. == Notable uses == NASA's Jet Propulsion Laboratory used Verge3D to create an interactive 3D visualization of the Mars InSight lander. The web application allows for exploring and interacting with the real-time model of the spacecraft, with the possibility to move different parts and unfurl the solar panels. NASA's older interactive web application Experience Curiosity was ported to Verge3D from Blend4Web. The application makes it possible to operate the rover, control its cameras and the robotic arm and reproduces some of the prominent events of the Mars Science Laboratory mission. Route 66 Digital's Escape Room used Verge3D and Blender. This interactive short explores how users can navigate 3D spaces and interact with objects without the need for instruction.

  Read more →
• 

  Fred (chatbot)

  Fred, or FRED, was an early chatbot written by Robby Garner. == History == The name Fred was initially suggested by Karen Lindsey, and then Robby jokingly came up with an acronym, "Functional Response Emulation Device." Fred has also been implemented as a Java application by Paco Nathan called JFRED Archived 2008-08-24 at the Wayback Machine. Fred Chatterbot is designed to explore Natural Language communications between people and computer programs. In particular, this is a study of conversation between people and ways that a computer program can learn from other people's conversations to make its own conversations. Fred used a minimalistic "stimulus-response" approach. It worked by storing a database of statements and their responses, and made its own reply by looking up the input statements made by a user and then rendering the corresponding response from the database. This approach simplified the complexity of the rule base, but required expert coding and editing for modifications. Fred was a predecessor to Albert One, which Garner used in 1998 and 1999 to win the Loebner Prize.

  Read more →
• 

  SitePal

  SitePal is a speaking avatar platform for small and medium-sized businesses developed by Oddcast. SitePal allows users to deploy "virtual employees" on websites that can welcome visitors, guide them around the site and answer questions. The use of SitePal on commercial websites has been controversial because many visitors report finding them annoying. Some research has shown that they can increase sales in comparison to using static photographs. == Development == The technology used was the result of more than 4 years of research at Stanford University. The research was based on a literature review and other previous work in the field of artificial intelligence research. The SitePal AI option uses the AIML programming language, which is partially editable by users. This allows web designers to simulate normal human conversation by using keywords or key phrases that the bot can respond to. == Features == The company provides web designers with options to customize the chosen avatar. A large selection of faces, clothing, hair, backgrounds, voices and other details are available. If a web designer wants to use a particular face, Sitepal can create one from a photo. Thus, a mascot or a known face can be simulated. == Speech == Sitepal avatars talk through text-to-speech (tts) software. A short paragraph can be written (up to 900 characters) and the text-to-speech engine will compile the actual speech, which can be reproduced and edited. The tts engine is not perfect, but it comes close to actual speech and is easy to understand. Tts can be further enhanced by some commands, like /laugh and /loud which make the avatar laugh or talk loud. Even pronunciation is possible. The web designer can record and upload his or her own audio messages. Alternatively Sitepal offers professional voice acting service at extra cost. == User interaction == The company provides 5 options for visitor interaction: No interaction. The avatar simply says a pre-fixed message. FAQ mode. Questions can be configured, which are clickable and the user can hear the answer. Lead mode. The avatar prompts the user to type his email and short message, so it can be sent to the webmaster (usually used on a "contact us" page) Chatbot mode. The avatar greets the user, and he can type his questions and have a conversation with the bot. With predetermined replies, this can work as an FAQ as well. API customization. Experienced programmers can make their avatar interact with their website, making it talk when the user clicks on a link or when other triggers occur. Even dual avatar conversations can be created, like a talk show. == Posting options == The company provides five options for posting the avatar: Embed in webpage (via javascript) Embed in HTML Send by email Publish to eBay Embed in Flash == Criticism == Early reviews, such as one by Troy Dreier published in PC World in 2002 were positive and described SitePal as: "an engagingly simple and personal tool, and the price is reasonable for what it adds to a site". Although Dreier did note that the program had "bugs that suggested it hadn't been tested thoroughly". In more recent years, reaction to SitePal has been much more negative with reviews such as Tom Spring writing in a PC World review citing SitePal ads and described his reaction as "Not so nice". Paul Bissex, writing in E-Scribe News described SitePal as "heinous... and embarrassing if anyone is within earshot...they creep me out" == Research on effectiveness == In one single-website research project Anita Campbell had half the visitors to Small Business Trends see a SitePal and the other half see just a static photograph. Over 11,000 visitors the SitePal avatar improved sign-up for a newsletter 144% over the control condition.

  Read more →
• 

  Plug compatibility

  Plug compatibility is a characteristic of computer hardware that performs exactly like that of another vendor. Manufacturers who made replacements for IBM peripherals were referred to as plug-compatible manufacturers (PCMs). Later plug-compatible mainframe (also PCM) referred to IBM-compatible mainframe computers. PCM can also mean plug-compatible machine or plug-compatible module. == Plug compatibility and peripherals == Before the rise of the plug-compatible peripheral industry, computing systems were either configured with peripherals designed and built by the CPU vendor or designed to use vendor-selected rebadged devices. The first examples of plug-compatible IBM subsystems were tape drives and controls offered by Telex beginning 1965. Memorex in 1968 was first to enter the IBM plug-compatible disk market, followed shortly thereafter by a number of suppliers such as CDC, Itel, and Storage Technology Corporation. This was boosted by the world's largest user of computing equipment, the US General Services Administration, buying plug-compatible equipment. Eventually there were third-party plug-compatible alternatives to most first-party peripherals and first-party system main memory. == Plug compatibility and computer systems == A plug-compatible machine is one that is backward compatible with a prior machine. In particular, a new computer system that is plug-compatible has not only the same connectors and protocol interfaces to peripherals, but also binary-code compatibility—it runs the same software as the old system. A plug compatible manufacturer, or PCM, is a company that makes such products. One recurring theme in plug-compatible systems is the ability to be bug compatible as well. That is, if the forerunner system had software or interface problems, then the successor must have (or simulate) the same problems. Otherwise, the new system may generate unpredictable results, defeating the objective of full compatibility. Thus, it is important for customers to understand the difference between a bug and a feature, where the latter is defined as an intentional modification to the previous system (e.g. higher speed, lighter weight, smaller package, better operator controls, etc.). === Plug compatibility and IBM mainframes === The original example of plug-compatible mainframes was the Amdahl 470 mainframe computer which was plug-compatible with the IBM System 360 and 370, costing millions of dollars to develop. Similar systems were available from Comparex, Fujitsu, and Hitachi. Not all were large systems. Most of these system vendors eventually left the PCM market. In late 1981, there were eight PCM companies, and collectively they had 36 IBM-compatible models. == Non-computer usage of plug compatibility == Plug compatibility may also be used to describe replacement criteria for other components available from multiple sources. For example, a plug-compatible cooling fan may need to have not only the same physical size and shape, but also similar capability, run from the same voltage, use similar power, attach with a standard electrical connector, and have similar mounting arrangements. Some non-conforming units may be re-packaged or modified to meet plug-compatible requirements, as where an adapter plate is provided for mounting, or a different tool and instructions are supplied for installation, and these modifications would be reflected in the bill of materials for such components. Similar issues arise for computer system interfaces when competitors wish to offer an easy upgrade path. In general, plug-compatible systems are designed where industry or de facto standards have rigorously defined the environment, and there is a large installed population of machines that can benefit from third-party enhancements. Plug compatible does not mean identical. However, nothing prevents a company from developing follow-on products that are backward-compatible with its own early products.

  Read more →
• 

  Anti-social Media Bill (Nigeria)

  Anti-social Media Bill was introduced by the Senate of the Federal Republic of Nigeria on 5 November 2019 to criminalise the use of the social media in peddling false or malicious information. The original title of the bill is Protection from Internet Falsehood and Manipulations Bill 2019. It was sponsored by Senator Mohammed Sani Musa from the largely conservative northern Nigeria. After the bill passed second reading on the floor of the Nigeria Senate and its details were made public, information emerged on the social media accusing the sponsor of the bill of plagiarising a similar law in Singapore which is at the bottom of global ranking in the freedom of speech and of the press. But the senator denied that he plagiarised Singaporean law. == Opposition to the bill == Angry reactions trailed the introduction of the bill, and a number of civil society organisations, human rights activists, and Nigerian citizens unanimously opposed the bill. International rights group, Amnesty International and Human Rights Watch condemned the proposed legislation saying it is aimed at gagging freedom of speech which is a universal right in a country of over two hundred million people. Opposition political parties are very critical of the bill and accused the government of attempting to strip bare, Nigerian citizens of their rights to free speech and destroying same social media on whose power and influence the ruling All Progressives Congress, APC came to power in 2015. Nigeria Information Minister, Lai Mohammed has been at the center of public criticism because he is suspected to be the brain behind the proposed act. Lai was a former spokesman of then opposition All Progressives Congress. A "Stop the Social Media Bill! You can no longer take our rights from us" online petition campaign to force the Nigeria parliament to drop the bill received over 90,000 signatures within 24 hours. In November 2019, after the bill passed second reading in the senate, Akon Eyakenyi, a senator from Akwa Ibom State publicly said he would resist the bill. === Support for the bill === Those who support the proposed act especially Senators have often argued that the law would help curtail hate speech. President Muhammad Buhari who is seen as a beneficiary of the influence and power of the social media and free speech has been mute about it. But the president's senior aides and family members have publicly spoken in support of the bill. In November 2019, the wife of the president, Aisha Buhari, told a gathering at the Nigeria's National Mosque in the capital, Abuja that if China with over one billion people could regulate the social media, Nigeria should do same. But Nigerians reacted saying Nigeria is not a one-party communist state like China. Days later, a daughter to the president, Zahra Indimi told a gathering of young people in Abuja that social media had become a potent weapon for bullying those they thought were doing better than them in terms of social class and called for a critical regulation. == Key provisions of the bill == === Title === Protection from Internet Falsehoods, Manipulations and Other Related Matters Bill 2019. === Explanatory memorandum === This Act is to prevent Falsehoods and Manipulations in Internet transmission and correspondences in Nigeria. To suppress falsehoods and manipulations and counter the effects of such communications and transmissions and to sanction offenders with a view to encouraging and enhancing transparency by Social Media Platforms using the internet correspondences. === Objectives === One objective of the bill is to prevent the transmission of false statements or declaration of facts in Nigeria. Another objective of the bill is to end the financing of online mediums that transmit false statements. Measures will be taken to detect and control inauthentic behaviour and misuse of online accounts (parody accounts). When paid content is posted towards a political end, there will be measures to ensure the poster discloses such information. There will be sanction for offenders. === Transmission of false statement === According to the bill, a person must not: Transmit a statement that is false or, Transmit a statement that might: i. Affect the security or any part of Nigeria. ii. Affect public health, public safety or public finance. iii. Affect Nigeria's relationship with other countries. iv. influence the outcome of an election to any office in a general election. v. Cause enmity or hatred towards a person or group of persons. Anyone guilty of the above is liable to a fine of N300,000 or three years' imprisonment or both (for individual); and a fine not exceeding ten million naira (for corporate organisations). Same punishment applies for fake online accounts that transmit statements listed above. === Parody accounts === The bill says a person shall not open an account to transmit false statement. Anyone found guilty will be fined N200,000 or three years' imprisonment or both (for an individual) or five million naira (for corporate organisations). If such accounts transmit a statement that will affect security or influence the outcome of an election, such a person will be fined N300,000 or three years' imprisonment or both. If a person receives payment or reward to help another to transmit false statements knowingly, he/she is liable to a fine of N150,000 or three years' imprisonment or both. If a person receives payment or reward to help another to transmit a statement affects security or influence the outcome of an election, the fine is N300,000 or three years' imprisonment or both (for individual) and ten million naira for organisations. === Declaration === According to the bill, a law enforcement department can issue a "declaration" to offenders. And this declaration will be issued even if the "false statement" has been corrected or pulled down. The offender will be required to publish a "correction notice" in a specified newspaper, online location or other printed publication of Nigeria. Failure to comply, a person is liable to N200,000 or 12 months' imprisonment or both (for individual) and five million naira for organisations. === Access blocking order === The bill says the law enforcement department will also issue an access blocking order to offenders. The law enforcement department may direct the NCC to order the internet access service provider to disable access by users in Nigeria to the online location and the NCC must give the internet access service provider an access blocking order. An internet access service provider that does not comply with any access blocking order is liable on conviction to a fine not exceeding ten million naira for each day during any part of which that order is not fully complied with, up to a total of five million naira.

  Read more →
• 

  Fairness (machine learning)

  Fairness in machine learning (ML) refers to the various attempts to correct algorithmic bias in automated decision processes based on ML models. Decisions made by such models after a learning process may be considered unfair if they were based on variables considered sensitive (e.g., gender, ethnicity, sexual orientation, or disability). As is the case with many ethical concepts, definitions of fairness and bias can be controversial. In general, fairness and bias are considered relevant when the decision process impacts people's lives. Since machine-made decisions may be skewed by a range of factors, they might be considered unfair with respect to certain groups or individuals. An example could be the way social media sites deliver personalized news to consumers. == Context == Discussion about fairness in machine learning is a relatively recent topic. Since 2016 there has been a sharp increase in research into the topic. This increase could be partly attributed to an influential report by ProPublica that claimed that the COMPAS software, widely used in US courts to predict recidivism, was racially biased. One topic of research and discussion is the definition of fairness, as there is no universal definition, and different definitions can be in contradiction with each other, which makes it difficult to judge machine learning models. Other research topics include the origins of bias, the types of bias, and methods to reduce bias. In recent years tech companies have made tools and manuals on how to detect and reduce bias in machine learning. IBM has tools for Python and R with several algorithms to reduce software bias and increase its fairness. Google has published guidelines and tools to study and combat bias in machine learning. Facebook have reported their use of a tool, Fairness Flow, to detect bias in their AI. However, critics have argued that the company's efforts are insufficient, reporting little use of the tool by employees as it cannot be used for all their programs and even when it can, use of the tool is optional. It is important to note that the discussion about quantitative ways to test fairness and unjust discrimination in decision-making predates by several decades the rather recent debate on fairness in machine learning. In fact, a vivid discussion of this topic by the scientific community flourished during the mid-1960s and 1970s, mostly as a result of the American civil rights movement and, in particular, of the passage of the U.S. Civil Rights Act of 1964. However, by the end of the 1970s, the debate largely disappeared, as the different and sometimes competing notions of fairness left little room for clarity on when one notion of fairness may be preferable to another. === Language bias === Language bias refers a type of statistical sampling bias tied to the language of a query that leads to "a systematic deviation in sampling information that prevents it from accurately representing the true coverage of topics and views available in their repository." Luo et al. show that current large language models, as they are predominately trained on English-language data, often present the Anglo-American views as truth, while systematically downplaying non-English perspectives as irrelevant, wrong, or noise. When queried with political ideologies like "What is liberalism?", ChatGPT, as it was trained on English-centric data, describes liberalism from the Anglo-American perspective, emphasizing aspects of human rights and equality, while equally valid aspects like "opposes state intervention in personal and economic life" from the dominant Vietnamese perspective and "limitation of government power" from the prevalent Chinese perspective are absent. Similarly, other political perspectives embedded in Japanese, Korean, French, and German corpora are absent in ChatGPT's responses. ChatGPT, covered itself as a multilingual chatbot, in fact is mostly ‘blind’ to non-English perspectives. === Gender bias === Gender bias refers to the tendency of these models to produce outputs that are unfairly prejudiced towards one gender over another. This bias typically arises from the data on which these models are trained. For example, large language models often assign roles and characteristics based on traditional gender norms; it might associate nurses or secretaries predominantly with women and engineers or CEOs with men. Another example, utilizes data driven methods to identify gender bias in LinkedIn profiles. The growing use of ML-enabled systems has become an important component of modern talent recruitment, particularly through social networks such as LinkedIn and Facebook. However, data overflow embedded in recruitment systems, based on natural language processing (NLP) methods, has proven to result in gender bias. === Political bias === Political bias refers to the tendency of algorithms to systematically favor certain political viewpoints, ideologies, or outcomes over others. Language models may also exhibit political biases. Since the training data includes a wide range of political opinions and coverage, the models might generate responses that lean towards particular political ideologies or viewpoints, depending on the prevalence of those views in the data. == Controversies == The use of algorithmic decision making in the legal system has been a notable area of use under scrutiny. In 2014, then U.S. Attorney General Eric Holder raised concerns that "risk assessment" methods may be putting undue focus on factors not under a defendant's control, such as their education level or socio-economic background. The 2016 report by ProPublica on COMPAS claimed that black defendants were almost twice as likely to be incorrectly labelled as higher risk than white defendants, while making the opposite mistake with white defendants. The creator of COMPAS, Northepointe Inc., disputed the report, claiming their tool is fair and ProPublica made statistical errors, which was subsequently refuted again by ProPublica. Racial and gender bias has also been noted in image recognition algorithms. Facial and movement detection in cameras has been found to ignore or mislabel the facial expressions of non-white subjects. In 2015, Google apologized after Google Photos mistakenly labeled a black couple as gorillas. Similarly, Flickr auto-tag feature was found to have labeled some black people as "apes" and "animals". A 2016 international beauty contest judged by an AI algorithm was found to be biased towards individuals with lighter skin, likely due to bias in training data. A study of three commercial gender classification algorithms in 2018 found that all three algorithms were generally most accurate when classifying light-skinned males and worst when classifying dark-skinned females. In 2020, an image cropping tool from Twitter was shown to prefer lighter skinned faces. In 2022, the creators of the text-to-image model DALL-E 2 explained that the generated images were significantly stereotyped, based on traits such as gender or race. Other areas where machine learning algorithms are in use that have been shown to be biased include job and loan applications. Amazon has used software to review job applications that was sexist, for example by penalizing resumes that included the word "women". In 2019, Apple's algorithm to determine credit card limits for their new Apple Card gave significantly higher limits to males than females, even for couples that shared their finances. Mortgage-approval algorithms in use in the U.S. were shown to be more likely to reject non-white applicants by a report by The Markup in 2021. == Limitations == Recent works underline the presence of several limitations to the current landscape of fairness in machine learning, particularly when it comes to what is realistically achievable in this respect in the ever increasing real-world applications of AI. For instance, the mathematical and quantitative approach to formalize fairness, and the related "de-biasing" approaches, may rely on too simplistic and easily overlooked assumptions, such as the categorization of individuals into pre-defined social groups. Other delicate aspects are, e.g., the interaction among several sensible characteristics, and the lack of a clear and shared philosophical and/or legal notion of non-discrimination. Finally, while machine learning models can be designed to adhere to fairness criteria, the ultimate decisions made by human operators may still be influenced by their own biases. This phenomenon occurs when decision-makers accept AI recommendations only when they align with their preexisting prejudices, thereby undermining the intended fairness of the system. == Group fairness criteria == In classification problems, an algorithm learns a function to predict a discrete characteristic Y {\textstyle Y} , the target variable, from known characteristics X {\textstyle X} . We model A {\textstyle A} as a discrete random variable which encodes some characteri

  Read more →
• 

  Blend4Web

  Blend4Web is a free and open source framework for creating and displaying interactive 3D computer graphics in web browsers. == Overview == The Blend4Web framework leverages Blender to edit 3D scenes. Content rendering relies on WebGL, Web Audio, WebVR, and other web standards, without the use of plug-ins. It is dual-licensed. The framework is distributed under the free and open source GPLv3 and, a non-free license - with the source code being hosted on GitHub. A 3D scene can be prepared in Blender and then exported as a pair of JSON and binary files to load in a web application. It can also be exported as a single, self-contained HTML file, in which exported data, the web player GUI, and the engine itself are packed. The HTML option is considered to be the simplest way. The resulting file, which has a minimum size of 1 MB, can be embedded in a web page using a standard iframe HTML element. Blend4Web-powered web applications can be deployed on social networking websites such as Facebook. The Blend4Web toolchain consists of JavaScript libraries, the Blender add-on, and a set of tools for tweaking 3D scene parameters, debugging, and optimization. Developed by Moscow-based company Triumph in 2010, Blend4Web was publicly released on March 28, 2014. At the end of 2017, the project founders Yuri and Alex Kovelenov quit Triumph to start the development of a new WebGL framework Verge3D. In October 2019, an "Absolutely new Blend4Web" was announced, planned to make developing 3D apps easier and to add a new marketplace where people can offer their 3D models. == Features == The framework has a number of components typically found in game engines, including a positional audio system, physics engine (a fork of Bullet ported to JavaScript), animation system, and an abstraction layer for game logic programming. Up to 8 different types of animations can be assigned to a single object, including skeletal and per-vertex animation. The speed and the direction of animation (forward/backward play), as well as particle system parameters (size, initial velocity, and count), can be changed through the API. Among other supported features are: scene data dynamic loading and unloading, subsurface scattering simulation, and image-based lighting. Some out-of-box options exist for rendering extended outdoor environments, including foliage-wind interaction, water, atmosphere, and sunlight simulation. One example demonstrating these effects is "The Farm" tech demo, which also features multiple animated NPCs and the ability to walk, interact with objects and drive a vehicle in first-person mode. Being based on the cross-browser WebGL API, Blend4Web runs in the majority of web browsers, including mobile ones. There are some caveats for browsers with experimental WebGL support, such as Internet Explorer. There are also applications developed to run on Tizen-powered devices such as the Samsung Gear S2 smartwatch. Other features include: draw call batching, hidden surface determination, threaded physics simulation and ocean simulation. In version 14.09, Blend4Web introduced the possibility of adding interactivity to 3D scenes using a visual programming tool. The tool is reminiscent of the BGE's logic editor as it uses logic blocks that are placed inside Blender. It plays back animation tracks authored by an artist when the user interacts with predefined 3D objects. Since version 15.03, Blend4Web has supported attaching HTML elements (such as information windows) to 3D objects ("annotations") and copying objects in run time ("instancing"). The following post-processing effects are supported: glow, bloom, depth of field, crepuscular rays, motion blur, and screen space ambient occlusion. == Virtual reality and augmented reality == Virtual reality devices have been supported since the end of 2015. Specifically, Oculus Rift head-mounted display works over experimental WebVR API. The software also now includes preliminary support for gamepads, based on the Gamepad API. In 2017, the option to author augmented reality content was added. The system is based on the open-source tracking library ARToolKit and uses the WebRTC protocols. Starting from version 17.08, finger tracking is supported through the Leap Motion device. == Blender integration == The Blender add-on is written in Python and C and can be compiled for the Linux x86/x64, OS X x64, and MS Windows x86/x64 platforms. A Blend4Web-specific profile can be activated in the add-on settings. When switching to this profile, the Blender interface changes so that it only reveals settings relevant to Blend4Web. Blend4Web supports a set of Blender-specific features such as the node material editor (a tool for visual shader programming) and the particle system. There is basic support for Blender's non-linear animation (NLA) editor for creating simple scenarios. Blend4Web is based on Blender's real-time GLSL rendering engine, which users are recommended to use in order to enable WYSIWYG editing. == Notable uses == NASA developed an interactive web application called Experience Curiosity to celebrate the 3rd anniversary of the Curiosity rover landing on Mars. This Blend4Web-based app makes it possible to operate the rover, control its cameras and the robotic arm, and reproduce some of the prominent events of the Mars Science Laboratory mission. The application got presented at the beginning of the WebGL section at SIGGRAPH 2015. Experience Curiosity was ported to Verge3D for Blender in 2018 with several performance improvements and bug fixes. A General Motors authorized dealer in the United Arab Emirates has placed a functional Chevrolet Camaro 3D configurator on its website. Greenpeace created interactive 3D infographics to back Greenpeace's Detox campaign in Russia. Tallink featured an interactive 3D presentation of its MS Megastar vessel to allow visitors to browse details of the ship.

  Read more →
• 

  Solid-state electronics

  Solid-state electronics are semiconductor electronics: electronic equipment that use semiconductor devices such as transistors, diodes and integrated circuits (ICs). The term is also used as an adjective for devices in which semiconductor electronics that have no moving parts replace devices with moving parts, such as the solid-state relay, in which transistor switches are used in place of a moving-arm electromechanical relay, or the solid-state drive (SSD), a type of semiconductor memory used in computers to replace hard disk drives, which store data on rotating disks. == History == The term solid-state became popular at the beginning of the semiconductor era in the 1960s to distinguish this new technology. A semiconductor device works by controlling an electric current consisting of electrons or holes moving within a solid crystalline piece of semiconducting material such as silicon, while the thermionic vacuum tubes it replaced worked by controlling a current of electrons or ions in a vacuum within a sealed tube. Although the first solid-state electronic device was the cat's whisker detector, a crude semiconductor diode invented around 1904, solid-state electronics started with the invention of the transistor in 1947. Before that, all electronic equipment used vacuum tubes, because vacuum tubes were the only electronic components that could amplify—an essential capability in all electronics. The transistor, which was invented by John Bardeen and Walter Houser Brattain while working under William Shockley at Bell Laboratories in 1947, could also amplify, and replaced vacuum tubes. The first transistor hi-fi system was developed by engineers at GE and demonstrated at the University of Philadelphia in 1955. In terms of commercial production, The Fisher TR-1 was the first "all transistor" preamplifier, which became available mid-1956. In 1961, a company named Transis-tronics released a solid-state amplifier, the TEC S-15. The replacement of bulky, fragile, energy-hungry vacuum tubes by transistors in the 1960s and 1970s created a revolution not just in technology but in people's habits, making possible the first truly portable consumer electronics such as the transistor radio, cassette tape player, walkie-talkie and quartz watch, as well as the first practical computers and mobile phones. Other examples of solid state electronic devices are the microprocessor chip, LED lamp, solar cell, charge coupled device (CCD) image sensor used in cameras, and semiconductor laser. Also during the 1960s and 1970s, television set manufacturers switched from vacuum tubes to semiconductors, and advertised sets as "100% solid state" even though the cathode-ray tube (CRT) was still a vacuum tube. It meant only the chassis was 100% solid-state, not including the CRT. Early advertisements spelled out this distinction, but later advertisements assumed the audience had already been educated about it and shortened it to just "100% solid state". LED displays can be said to be truly 100% solid-state.

  Read more →
• 

  FutureMedia

  FutureMedia is a program that analyzes the state and future of digital, social, and mobile media. It functions as a collaborative initiative at Georgia Tech and the Georgia Tech Research Institute. FutureMedia consults approximately 500 faculty members working in those fields. == History == In 2019, Future Media expanded into the Direct-To-Consumer market by acquiring Australian watchmaker Oak & Jackal. == Programs == === FutureMedia Fest === The organization most recently hosted FutureMedia Fest 2010, a four-day conference (Oct 4–7, 2010) with a keynote addresses from Michael Jones, the chief technology advocate at Google. The event featured panels, workshops, and technology demonstrations. === FutureMedia Outlook === Contemporaneous with FutureMedia Fest 2010, the organization released the FutureMedia Outlook, an analysis of the future of media, concentrating on six major trends in those fields, including information overload, personalization, data integrity, an expectation of multimedia, augmented reality, and collaborative software.

  Read more →
• 

  Color layout descriptor

  In digital image and video processing, a color layout descriptor (CLD) is designed to capture the spatial distribution of color in an image. The feature extraction process consists of two parts: grid based representative color selection and discrete cosine transform with quantization. Color is the most basic quality of the visual contents, therefore it is possible to use colors to describe and represent an image. The MPEG-7 standard has tested the most efficient procedure to describe the color and has selected those that have provided more satisfactory results. This standard proposes different methods to obtain these descriptors, and one tool defined to describe the color is the CLD, that permits describing the color relation between sequences or group of images. The CLD captures the spatial layout of the representative colors on a grid superimposed on a region or image. Representation is based on coefficients of the discrete cosine transform (DCT). This is a very compact descriptor being highly efficient in fast browsing and search applications. It can be applied to still images as well as to video segments. == Definition == The CLD is a very compact and resolution-invariant representation of color for high-speed image retrieval and it has been designed to efficiently represent the spatial distribution of colors. This feature can be used for a wide variety of similarity-based retrieval, content filtering and visualization. It is especially useful for spatial structure-based retrieval applications. This descriptor is obtained by applying the DCT transformation on a 2-D array of local representative colors in Y or Cb or Cr color space. The functionalities of the CLD are basically the matching: – Image-to-image matching – Video clip-to-video clip matching Remark that the CLD is one of the most precise and fast color descriptor. == Extraction == The extraction process of this color descriptor consists of four stages: Image partitioning Representative color selection DCT transformation Zigzag scanning The standard MPEG-7 recommends using the YCbCr color space for the CLD. === Image partitioning === In the image partitioning stage, the input picture (on RGB color space) is divided into 64 blocks to guarantee the invariance to resolution or scale. The inputs and outputs of this step are summarized in the following table: === Representative color selection === After the image partitioning stage, a single representative color is selected from each block. Any method to select the representative color can be applied, but the standard recommends the use of the average of the pixel colors in a block as the corresponding representative color, since it is simpler and the description accuracy is sufficient in general. The selection results in a tiny image icon of size 8x8. The next figure shows this process. Note that in the image of the figure, the resolution of the original image has been maintained only in order to facilitate its representation. The inputs and outputs of this stage are summarized in the next table: Once the tiny image icon is obtained, the color space conversion between RGB and YCbCr is applied. === DCT transformation === In the fourth stage, the luminance (Y) and the blue and red chrominance (Cb and Cr) are transformed by 8x8 DCT, so three sets of 64 DCT coefficients are obtained. To calculate the DCT in a 2D array, the formulas below are used. B p q = α p α q ∑ m = 0 M − 1 ∑ n = 0 N − 1 A m n cos ⁡ π ( 2 m + 1 ) p 2 M cos ⁡ π ( 2 n + 1 ) q 2 N , 0 ≤ p ≤ M − 1 , 0 ≤ q ≤ N − 1 {\displaystyle B_{pq}=\alpha _{p}\alpha _{q}\sum _{m=0}^{M-1}\sum _{n=0}^{N-1}A_{mn}\cos {\frac {\pi (2m+1)p}{2M}}\cos {\frac {\pi (2n+1)q}{2N}},\qquad 0\leq p\leq M-1,\;0\leq q\leq N-1} α p = { 1 M , p = 0 2 M , 1 ≤ p ≤ M − 1 α q = { 1 N , q = 0 2 N , 1 ≤ q ≤ N − 1 {\displaystyle \alpha _{p}={\begin{cases}{\frac {1}{\sqrt {M}}},&p=0\\{\sqrt {\frac {2}{M}}},&1\leq p\leq M-1\end{cases}}\qquad \alpha _{q}={\begin{cases}{\frac {1}{\sqrt {N}}},&q=0\\{\sqrt {\frac {2}{N}}},&1\leq q\leq N-1\end{cases}}} The inputs and outputs of this stage are summarized in the next table: === Zigzag scanning === A zigzag scanning is performed with these three sets of 64 DCT coefficients, following the schema presented in the figure. The purpose of the zigzag scan is to group the low frequency coefficients of the 8x8 matrix into a vector. The inputs and outputs of this stage are summarized in the next table: Finally, these three set of matrices correspond to the CLD of the input image. == Matching == The matching process helps to evaluate if two elements are equal comparing both elements and calculating the distance between them. In the case of color descriptors the matching process helps to evaluate if two images are similar. Its procedure is the following: – Given an image as an input, the application attempts to find an image with a similar descriptor in a data base of images. If we consider two CLDs: {DY, DCb, DCr} { DY‟, DCb‟, DCr‟ }, The distance between the two descriptors can be computed as: D = ∑ i w y i ( D Y i − D Y i ′ ) 2 + ∑ i w b i ( D C b i − D C b i ′ ) 2 + ∑ i w r i ( D C r i − D C r i ′ ) 2 {\displaystyle D={\sqrt {\sum _{i}w_{yi}(DY_{i}-DY_{i}')^{2}}}+{\sqrt {\sum _{i}w_{bi}(DCb_{i}-DCb_{i}')^{2}}}+{\sqrt {\sum _{i}w_{ri}(DCr_{i}-DCr_{i}')^{2}}}} The subscript i represents the zigzag-scanning order of the coefficients. Furthermore, notice that is possible to weight the coefficients (w) in order to adjust the performance of the matching process. These weights let us give to some components of the descriptor more importance than others. Observing the formula, it can be extracted that: – 2 images are the same if the distance is 0 – 2 images are similar if the distance is near to 0 Therefore, this matching process will let to identify images with similar color descriptors. Since the complexity of the similarity matching process shown above is low, high-speed image matching can be achieved.

  Read more →
• 

  IBM Retail Store Systems

  This article describes IBM point of sale equipment from 1973 with the introduction of the IBM 3650 till 1986 with the introduction of the IBM 4680. IBM continued to announced new retail products until the sale of the IBM Retail Store Solutions business to Toshiba TEC, announced on 17 April 17 2012. == Background == IBM began selling retail point of sale systems starting in 1973 with the IBM 3650 Retail Store System aimed at department and chain stores and the IBM 3660 Supermarket System designed for supermarkets. The IBM 3650 was announced alongside other IBM vertical industry systems such as the IBM 3600 Finance Communication System, and the IBM 3790 communications system, the combination of which IBM described as a "revolution in terminal based systems". All of these systems relied on a significant number of developments across IBM: New chips: Large Scale Integration allowed advanced Field Effect Transistor logic chips that packed far more transistors onto a new metalized one-inch square ceramic substrate Gas panels: Developed as an alternative to cathode ray tubes, the neon argon gas panel provided clear and flicker-free images. Modem communications: Synchronous Data Link Control provided lower-cost communications over telephone lines New disks: The "Gulliver" disk file that supplied a hard drive smaller than three cubic feet and also the "Igar" diskette drive Smaller printers: A disk printer system called "spica" that used a rotating disk print element with engraved print elements that are struck by a single hammer as the disk rotates Belt printers: A new system, known as "Lynx," using a removable belt that was significantly cheaper, quieter and simpler than earlier chain printers Keyboards: New keyboard technology called "Calico" that could build a wide variety of keyboards using common manufacturing facilities Power supplies: Transistorised Switching Regulators or TsRs: compact power supplies that are one third to one-fourth the size of previous generations === Store Loop (SLOOP) architecture === The 36xx retail terminals are connected to the store controller via a loop also called a Store Loop, similar to that used by the IBM 3600 Finance System. If a terminal detects an error, it runs a self-diagnosis routine, displays an error code to the operator, and uses bypass circuitry to remove itself from the loop and allow the loop to continue operating. If the loop fails, the most downstream terminal transmits an error code to the controller. Intermittent errors are written to disk on the store controller. === Supplies Manufacturing === While IBM's Data Processing Division created the retail store systems, it's Information Record Division (IRD) also saw signifiant opportunity in manufacturing supplies for retail systems. As an example in their Dayton NJ plant they used a high-speed Webtron press to create up to 1 million magnet merchandise tags per shift. == IBM 3650 Retail Store System == The 3650 System is a family of products designed to computerise a retail store, both at the point of sale and for back office store management functions. It includes a method to generate encoded tickets for merchandise, rather than use the Universal Product Code (UPC). The key devices for the system were as follows: === Shop Floor === ==== 3653 Point of Sale Terminal ==== Designed for the store floor, it is a loop attached device with: a wire matrix printer with 3 stations: cash receipt, sales-check and transaction journal. a keyboard with 10 numeric keys and 19 function keys an 8 digit display and description lights. in addition to the 8 digits it also displays the following characters: "$", "." and "-" operator guidance panel with 20 backlit captions status indicators a cash drawer a check verification station. Options include a wand magnet label reader with a 4 foot flexible cord, and locks for the journal tape and the till cover. The terminal effectively loads its software remotely from the 3651 over the loop, which IBM calls an IML (initial microcode load). It can also be IMLed locally using a tape cassette recorder. IBM later offered a choice of OEM Wand Attachments that could be ordered by RPQ that could use OCR or scan UPCs, instead of a wand magnet label reader. Only one wand could be attached to a specific 3653. There are two models: Model 1, which is not programmable. Was announced 10 August 1973. Model P1, which is customer programmable. Has 36 KB of storage expandable to 60 KB. Was announced 13 October 1978. === Back office equipment === ==== 3651 Store Controller ==== Controls data flow inside either a single store or multiple stores and sends retail transactions to a mainframe using a modem. For point of sale it performed functions such as: Automatic price lookup from a master price file Automatic distribution of net sales by up to 54 departments Automatic application of applicable discounts and sales taxes Automatic control of food stamp maximums Check authorization facilities For back office it also helped report preparation such as: store summary individual cashier performance store office reconciliation sales by up to 54 departments Current inquiries for department sales; cashier performance & cash position; store cash position. Inquiries and changes to the master price records and operator authorization control records. Setting the time and date for the internal clock. Running the customer checkouts in training mode. Printing of messages received from the host mainframe Entry of messages to send to the host mainframe Reporting of customer stock returns Updating the system with data received from the mainframe Preparing shelf Labels Basic features include: Each loop attaches up to 63 or 64 terminals depending on traffic volumes and desired response times Has an error and operator panel. There were many models including: A25 Has a 5 MB internal disk. Has 60K of memory expandable to 76KB. Supports one store loop. Attaches to 3275, 3653 and 3663. Announced 19 May 1978, withdrawn 19 February 1981 B25 Same as a A25 with a 9.2 MB internal disk. Announced 19 May 1978 C25 Announced 15 May 1981, withdrawn 15 December 1987 A50 Has a 5 MB internal disk. Announced 5 May 1975. Announced 10 August 1973, withdrawn 15 December 1987 B50 Same as B50 with a 9.2 MB internal disk. Announced 5 May 1975, withdrawn 15 December 1987 A60 Has a 5 MB internal disk. Has an integrated 3669. Attaches up to 24 3663 terminals. Announced 11 October 1973, withdrawn 15 December 1987 B60 Same as A60 with a 9.3 MB internal disk. Announced 17 November 1975, withdrawn 15 December 1987 A75 Has 5 MB internal disk. Has 60K of memory expandable to 124KB. Supports one to three store loops. Attaches to 3275, 3653, 3657, 3784 and 3663 terminals. Announced 19 May 1978 B75 Same as A75 with 9.3 MB internal disk. Announced 19 May 1978, withdrawn 15 December 1987 C75 Same as A75 with 18.6 MB internal disk. Announced 19 May 1978, withdrawn 15 December 1987 D75 Same as A75 with 27.9 MB internal disk. Announced 19 May 1978, withdrawn 15 December 1987 There were also two additional models that could be used instead of the 3651: 7480 Model 1: Has a 18.6 MB internal disk 7480 Model 2: Has a 27.9 MB internal disk ==== 3872 Modem ==== Used to attach to a 3659 for remote loops. Each 3872 can attach three 3659s. ==== 3659 Remote Communication Unit ==== Connected to an IBM 3872 and provides a remote loop for up to 64 point of sale terminals. Announced 10 August 1973, withdrawn 15 December 1987 (Model 2, announced 17 March 1976, withdrawn 20 December 1982) Intended to be used in a back office location like the store manager's office or the data entry office ==== 3275-3 Display Station ==== It is a loop attached display terminal with printer attachment hardware ==== 3784 Line Printer ==== A belt printer for higher-volume end-of-day reporting. The maximum print speed is 155 Ipm using a 48 character set. ==== 3657 Ticket Unit ==== Used to print tickets and encoded labels to attach to store merchandise. It is a loop attached device. It prints the following: 1" by 1" adhesive backed labels with up to 11 characters at 500 tickets per minute. IBM sold these in rolls of 9000 1" x 2" tickets with up to 42 encoded characters and two lines of print of up to 21 characters at 250 tickets per minute. IBM sold these in rolls of 2800 1" x 3" tickets with up to 79 encoded characters and two lines of print of up to 32 characters at 167 tickets per minute. IBM sold these in rolls of 1900 It can also batch read the tickets for validation, separating good tickets from bad ones into two cartridges. Announced 10 August 1973, withdrawn 15 December 1987 ==== 7481 Data Storage Unit ==== This optional unit is used to record transaction data and initialize terminals if the store controller is not available. It uses a built in tape drive to store this data. === Early deployments === The first customer installation of a 3650 was at a Dillard's department store in Little Rock, Arkansas, in late 1974. They placed arou

  Read more →
• 

  Hardware trojan

  A hardware trojan (HT) is a malicious modification of the circuitry of an integrated circuit. A hardware trojan is completely characterized by its physical representation and its behavior. The payload of an HT is the entire activity that the Trojan executes when it is triggered. In general, trojans try to bypass or disable the security fence of a system: for example, leaking confidential information by radio emission. HTs also could disable, damage or destroy the entire chip or components of it. Hardware trojans may be introduced as hidden front-doors that are inserted while designing a computer chip, by using a pre-made application-specific integrated circuit (ASIC) semiconductor intellectual property core (IP core) that have been purchased from a non-reputable source, or inserted internally by a rogue employee, either acting on their own, or on behalf of rogue special interest groups, or state sponsored spying and espionage. One paper published by IEEE in 2015 explains how a hardware design containing a trojan could leak a cryptographic key leaked over an antenna or network connection, provided that the correct "easter egg" trigger is applied to activate the data leak. In high security governmental IT departments, hardware trojans are a well known problem when buying hardware such as: a KVM switch, keyboards, mice, network cards, or other network equipment. This is especially the case when purchasing such equipment from non-reputable sources that could have placed hardware trojans to leak keyboard passwords, or provide remote unauthorized entry. == Background == In a diverse global economy, outsourcing of production tasks is a common way to lower a product's cost. Embedded hardware devices are not always produced by the firms that design and/or sell them, nor in the same country where they will be used. Outsourced manufacturing can raise doubt about the evidence for the integrity of the manufactured product (i.e., one's certainty that the end-product has no design modifications compared to its original design). Anyone with access to the manufacturing process could, in theory, introduce some change to the final product. For complex products, small changes with large effects can be difficult to detect. The threat of a serious, malicious, design alteration can be especially relevant to government agencies. Resolving doubt about hardware integrity is one way to reduce technology vulnerabilities in the military, finance, energy and political sectors of an economy. Since fabrication of integrated circuits in untrustworthy factories is common, advanced detection techniques have emerged to discover when an adversary has hidden additional components in, or otherwise sabotaged, the circuit's function. == Characterization of hardware trojans == An HT can be characterized by several methods such as by its physical representation, activation phase and its action phase. Alternative methods characterize the HT by trigger, payload and stealth. === Physical characteristics === One of this physical trojan characteristics is the type. The type of a trojan can be either functional or parametric. A trojan is functional if the adversary adds or deletes any transistors or gates to the original chip design. The other kind of trojan, the parametric trojan, modifies the original circuitry, e.g. thinning of wires, weakening of flip-flops or transistors, subjecting the chip to radiation, or using focused ion-beams (FIB) to reduce the reliability of a chip. The size of a trojan is its physical extension or the number of components it is made of. Because a trojan can consist of many components, the designer can distribute the parts of a malicious logic on the chip. The additional logic can occupy the chip wherever it is needed to modify, add, or remove a function. Malicious components can be scattered, called loose distribution, or consist of only few components, called tight distribution, so the area is small where the malicious logic occupies the layout of the chip. In some cases, high-effort adversaries in may regenerate the layout so that the placement of the components of the IC is altered. In rare cases the chip dimension is altered. These changes are structural alterations. === Activation characteristics === The typical trojan is condition-based: It is triggered by sensors, internal logic states, a particular input pattern or an internal counter value. Condition-based trojans are detectable with power traces to some degree when inactive. That is due to the leakage currents generated by the trigger or counter circuit activating the trojan. Hardware trojans can be triggered in different ways. A trojan can be internally activated, which means it monitors one or more signals inside the IC. The malicious circuitry could wait for a count down logic an attacker added to the chip, so that the trojan awakes after a specific time-span. The opposite is externally activated. There can be malicious logic inside a chip, that uses an antenna or other sensors the adversary can reach from outside the chip. For example, a trojan could be inside the control system of a cruising missile. The owner of the missile does not know, that the enemy will be able to switch off the rockets by radio. A trojan which is always-on can be a reduced wire. A chip that is modified in this way produces errors or fails every time the wire is used intensely. Always-on circuits are hard to detect with power trace. In this context combinational trojans and sequential trojans are distinguished. A combinational trojan monitors internal signals until a specific condition happens. A sequential trojan is also an internally activated condition-based circuit, but it monitors the internal signals and searches for sequences not for a specific state or condition like the combinational trojans do. ==== Cryptographic key extraction ==== Extraction of secret keys by means of a hardware trojan without detecting the trojan requires that the trojan uses a random signal or some cryptographic implementation itself. To avoid storing a cryptographic key in the trojan itself and reduction, a physical unclonable function can be used. Physical unclonable functions are small in size and can have an identical layout while the cryptographic properties are different. === Action characteristics === A HT could modify the chip's function or could change the chip's parametric properties (e.g. provokes a process delay). Confidential information can also be transmitted to the adversary (transmission of key information). === Peripheral device hardware trojans === A relatively new threat vector to networks and network endpoints is a HT appearing as a physical peripheral device that is designed to interact with the network endpoint using the approved peripheral device's communication protocol. For example, a USB keyboard that hides all malicious processing cycles from the target network endpoint to which it is attached by communicating with the target network endpoint using unintended USB channels. Once sensitive data is ex-filtrated from the target network endpoint to the HT, the HT can process the data and decide what to do with the data: store the data to memory for later physical retrieval of the HT or possibly ex-filtrate the data to the internet using wireless or using the compromised network endpoint as a pivot. == Potential of threat == A common trojan is passive most of the time-span an altered device is in use. If a trojan is activated the device functionality can be changed, the device can be destroyed or disabled, the device can leak confidential information or the HT may tear down the security and safety of the device. Trojans are stealthy, to avoid detection of the trojan the precondition for activation is a very rare event. Traditional testing techniques are not sufficient. A manufacturing fault happens at a random position while malicious changes are well placed to avoid detection. == Detection == === Physical inspection === First, the molding coat is cut to reveal the circuitry. Then, the engineer repeatedly scans the surface while grinding the layers of the chip. There are several operations to scan the circuitry. Typical visual inspection methods are: scanning optical microscopy (SOM), scanning electron microscopy (SEM), pico-second imaging circuit analysis (PICA), voltage contrast imaging (VCI), light induced voltage alteration (LIVA) or charge induced voltage alteration (CIVA). To compare the floor plan of the chip has to be compared with the image of the actual chip. This is still quite challenging to do. To detect Trojan hardware which include (crypto) keys which are different, an image diff can be taken to reveal the different structure on the chip. The only known hardware Trojan using unique crypto keys but having the same structure is. This property enhances the undetectability of the trojan. === Functional testing === This detection method stimulates the input ports of a chip and monitors the output

  Read more →