AI Code Platforms

AI Code Platforms — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

  • Action model learning

    Action model learning

    Action model learning (sometimes abbreviated action learning) is an area of machine learning concerned with the creation and modification of a software agent's knowledge about the effects and preconditions of the actions that can be executed within its environment. This knowledge is usually represented in a logic-based action description language and used as input for automated planners. Learning action models is important when goals change. When an agent acted for a while, it can use its accumulated knowledge about actions in the domain to make better decisions. Thus, learning action models differs from reinforcement learning. It enables reasoning about actions instead of expensive trials in the world. Action model learning is a form of inductive reasoning, where new knowledge is generated based on the agent's observations. The usual motivation for action model learning is the fact that manual specification of action models for planners is often a difficult, time-consuming, and error-prone task (especially in complex environments). == Action models == Given a training set E {\displaystyle E} consisting of examples e = ( s , a , s ′ ) {\displaystyle e=(s,a,s')} , where s , s ′ {\displaystyle s,s'} are observations of a world state from two consecutive time steps t , t ′ {\displaystyle t,t'} and a {\displaystyle a} is an action instance observed in time step t {\displaystyle t} , the goal of action model learning in general is to construct an action model ⟨ D , P ⟩ {\displaystyle \langle D,P\rangle } , where D {\displaystyle D} is a description of domain dynamics in action description formalism like STRIPS, ADL or PDDL and P {\displaystyle P} is a probability function defined over the elements of D {\displaystyle D} . However, many state of the art action learning methods assume determinism and do not induce P {\displaystyle P} . In addition to determinism, individual methods differ in how they deal with other attributes of domain (e.g. partial observability or sensoric noise). == Action learning methods == === State of the art === Recent action learning methods take various approaches and employ a wide variety of tools from different areas of artificial intelligence and computational logic. As an example of a method based on propositional logic, we can mention SLAF (Simultaneous Learning and Filtering) algorithm, which uses agent's observations to construct a long propositional formula over time and subsequently interprets it using a satisfiability (SAT) solver. Another technique, in which learning is converted into a satisfiability problem (weighted MAX-SAT in this case) and SAT solvers are used, is implemented in ARMS (Action-Relation Modeling System). Two mutually similar, fully declarative approaches to action learning were based on logic programming paradigm Answer Set Programming (ASP) and its extension, Reactive ASP. In another example, bottom-up inductive logic programming approach was employed. Several different solutions are not directly logic-based. For example, the action model learning using a perceptron algorithm or the multi level greedy search over the space of possible action models. In the older paper from 1992, the action model learning was studied as an extension of reinforcement learning. Nonetheless, further algorithms can be found that operate under different assumptions: FAMA can work even when some observations are missing, and it produces a general (lifted) planning model. It treats learning an action model like a planning problem, making sure the learned model matches the observations given. NOLAM can learn general action models even from noisy or imperfect data. LOCM focuses only on the order of actions in the data, ignoring any details about the states between those actions. The family of safe action model (SAM) learning methods create models that guarantee any plans made with them will actually work in the real world. There's also an extension called N-SAM that can learn action models with numeric conditions and effects. Additionally, numeric action models like N-SAM can be used to improve reinforcement learning (RL) performance through the RAMP algorithm. === Literature === Most action learning research papers are published in journals and conferences focused on artificial intelligence in general (e.g. Journal of Artificial Intelligence Research (JAIR), Artificial Intelligence, Applied Artificial Intelligence (AAI) or AAAI conferences). Despite mutual relevance of the topics, action model learning is usually not addressed in planning conferences like the International Conference on Automated Planning and Scheduling (ICAPS).

    Read more →
  • Geometric hashing

    Geometric hashing

    In computer science, geometric hashing is a method for efficiently finding two-dimensional objects represented by discrete points that have undergone an affine transformation, though extensions exist to other object representations and transformations. In an off-line step, the objects are encoded by treating each pair of points as a geometric basis. The remaining points can be represented in an invariant fashion with respect to this basis using two parameters. For each point, its quantized transformed coordinates are stored in the hash table as a key, and indices of the basis points as a value. Then a new pair of basis points is selected, and the process is repeated. In the on-line (recognition) step, randomly selected pairs of data points are considered as candidate bases. For each candidate basis, the remaining data points are encoded according to the basis and possible correspondences from the object are found in the previously constructed table. The candidate basis is accepted if a sufficiently large number of the data points index a consistent object basis. Geometric hashing was originally suggested in computer vision for object recognition in 2D and 3D, but later was applied to different problems such as structural alignment of proteins. == Geometric hashing in computer vision == Geometric hashing is a method used for object recognition. Let’s say that we want to check if a model image can be seen in an input image. This can be accomplished with geometric hashing. The method could be used to recognize one of the multiple objects in a base, in this case the hash table should store not only the pose information but also the index of object model in the base. === Example === For simplicity, this example will not use too many point features and assume that their descriptors are given by their coordinates only (in practice local descriptors such as SIFT could be used for indexing). ==== Training Phase ==== Find the model's feature points. Assume that 5 feature points are found in the model image with the coordinates ( 12 , 17 ) ; {\displaystyle (12,17);} ( 45 , 13 ) ; {\displaystyle (45,13);} ( 40 , 46 ) ; {\displaystyle (40,46);} ( 20 , 35 ) ; {\displaystyle (20,35);} ( 35 , 25 ) {\displaystyle (35,25)} , see the picture. Introduce a basis to describe the locations of the feature points. For 2D space and similarity transformation the basis is defined by a pair of points. The point of origin is placed in the middle of the segment connecting the two points (P2, P4 in our example), the x ′ {\displaystyle x'} axis is directed towards one of them, the y ′ {\displaystyle y'} is orthogonal and goes through the origin. The scale is selected such that absolute value of x ′ {\displaystyle x'} for both basis points is 1. Describe feature locations with respect to that basis, i.e. compute the projections to the new coordinate axes. The coordinates should be discretised to make recognition robust to noise, we take the bin size 0.25. We thus get the coordinates ( − 0.75 , − 1.25 ) ; {\displaystyle (-0.75,-1.25);} ( 1.00 , 0.00 ) ; {\displaystyle (1.00,0.00);} ( − 0.50 , 1.25 ) ; {\displaystyle (-0.50,1.25);} ( − 1.00 , 0.00 ) ; {\displaystyle (-1.00,0.00);} ( 0.00 , 0.25 ) {\displaystyle (0.00,0.25)} Store the basis in a hash table indexed by the features (only transformed coordinates in this case). If there were more objects to match with, we should also store the object number along with the basis pair. Repeat the process for a different basis pair (Step 2). It is needed to handle occlusions. Ideally, all the non-colinear pairs should be enumerated. We provide the hash table after two iterations, the pair (P1, P3) is selected for the second one. Hash Table: Most hash tables cannot have identical keys mapped to different values. So in real life one won’t encode basis keys (1.0, 0.0) and (-1.0, 0.0) in a hash table. ==== Recognition Phase ==== Find interesting feature points in the input image. Choose an arbitrary basis. If there isn't a suitable arbitrary basis, then it is likely that the input image does not contain the target object. Describe coordinates of the feature points in the new basis. Quantize obtained coordinates as it was done before. Compare all the transformed point features in the input image with the hash table. If the point features are identical or similar, then increase the count for the corresponding basis (and the type of object, if any). For each basis such that the count exceeds a certain threshold, verify the hypothesis that it corresponds to an image basis chosen in Step 2. Transfer the image coordinate system to the model one (for the supposed object) and try to match them. If successful, the object is found. Otherwise, go back to Step 2. === Finding mirrored pattern === It seems that this method is only capable of handling scaling, translation, and rotation. However, the input image may contain the object in mirror transform. Therefore, geometric hashing should be able to find the object, too. There are two ways to detect mirrored objects. For the vector graph, make the left side positive, and the right side negative. Multiplying the x position by -1 will give the same result. Use 3 points for the basis. This allows detecting mirror images (or objects). Actually, using 3 points for the basis is another approach for geometric hashing. === Geometric hashing in higher-dimensions === Similar to the example above, hashing applies to higher-dimensional data. For three-dimensional data points, three points are also needed for the basis. The first two points define the x-axis, and the third point defines the y-axis (with the first point). The z-axis is perpendicular to the created axis using the right-hand rule. Notice that the order of the points affects the resulting basis

    Read more →
  • Mark V. Shaney

    Mark V. Shaney

    Mark V. Shaney is a synthetic Usenet user whose postings in the net.singles newsgroups were generated by Markov chain techniques, based on text from other postings. The username is a play on the words "Markov chain". Many readers were fooled into thinking that the quirky, sometimes uncannily topical posts were written by a real person. The system was designed by Rob Pike with coding by Bruce Ellis. Don P. Mitchell wrote the Markov chain code, initially demonstrating it to Pike and Ellis using the Tao Te Ching as a basis. They chose to apply it to the net.singles netnews group. The program is fairly simple. It ingests the sample text (the Tao Te Ching, or the posts of a Usenet group) and creates a massive list of every sequence of three successive words (triplet) which occurs in the text. It then chooses two words at random, and looks for a word which follows those two in one of the triplets in its massive list. If there is more than one, it picks at random (identical triplets count separately, so a sequence which occurs twice is twice as likely to be picked as one which only occurs once). It then adds that word to the generated text. Then, in the same way, it picks a triplet that starts with the second and third words in the generated text, and that gives a fourth word. It adds the fourth word, then repeats with the third and fourth words, and so on. This algorithm is called a third-order Markov chain (because it uses sequences of three words). == Examples == A classic example, from 1984, originally sent as a mail message, later posted to net.singles is reproduced here: >From mvs Fri Nov 16 17:11 EST 1984 remote from alice It looks like Reagan is going to say? Ummm... Oh yes, I was looking for. I'm so glad I remembered it. Yeah, what I have wondered if I had committed a crime. Don't eat with your assessment of Reagon and Mondale. Up your nose with a guy from a firm that specifically researches the teen-age market. As a friend of mine would say, "It really doesn't matter"... It looks like Reagan is holding back the arms of the American eating public have changed dramatically, and it got pretty boring after about 300 games. People, having a much larger number of varieties, and are very different from what one can find in Chinatowns across the country (things like pork buns, steamed dumplings, etc.) They can be cheap, being sold for around 30 to 75 cents apiece (depending on size), are generally not greasy, can be adequately explained by stupidity. Singles have felt insecure since we came down from the Conservative world at large. But Chuqui is the way it happened and the prices are VERY reasonable. Can anyone think of myself as a third sex. Yes, I am expected to have. People often get used to me knowing these things and then a cover is placed over all of them. Along the side of the $$ are spent by (or at least for ) the girls. You can't settle the issue. It seems I've forgotten what it is, but I don't. I know about violence against women, and I really doubt they will ever join together into a large number of jokes. It showed Adam, just after being created. He has a modem and an autodial routine. He calls my number 1440 times a day. So I will conclude by saying that I can well understand that she might soon have the time, it makes sense, again, to get the gist of my argument, I was in that (though it's a Republican administration). _-_-_-_-Mark Other quotations from Mark's Usenet posts are: "I spent an interesting evening recently with a grain of salt." (Alternatively reported as "While at a conference a few weeks back, I spent an interesting evening with a grain of salt.") "I hope that there are sour apples in every bushel." (see also sour grapes) == History == In The Usenet Handbook Mark Harrison writes that after September 1981, students joined Usenet en masse, "creating the USENET we know today: endless dumb questions, endless idiots posing as savants, and (of course) endless victims for practical jokes." In December, Rob Pike created the netnews group net.suicide as prank, "a forum for bad jokes". Some users thought it was a legitimate forum, some discussed "riding motorcycles without helmets". At first, most posters were "real people", but soon "characters" began posting. Pike created a "vicious" character named Bimmler. At its peak, net.suicide had ten frequent posters; nine were "known to be characters." But ultimately, Pike deleted the newsgroup because it was too much work to maintain; Bimmler messages were created "by hand". The "obvious alternative" was software, running on a Bell Labs computer created by Bruce Ellis, based on the Markov code by Don Mitchell, which became the online character Mark V. Shaney. Kernighan and Pike listed Mark V. Shaney in the acknowledgements in The Practice of Programming, noting its roots in Mitchell's markov, which, adapted as shaney, was used for "humorous deconstructionist activities" in the 1980s. Dewdney pointed out "perhaps Mark V. Shaney's magnum opus: a 20-page commentary on the deconstructionist philosophy of Jean Baudrillard" directed by Pike, with assistance from Henry S. Baird and Catherine Richards, to be distributed by email. The piece was based on Jean Baudrillard's "The Precession of Simulacra", published in Simulacra and Simulation (1981). == Reception == The program was discussed by A. K. Dewdney in the Scientific American "Computer Recreations" column in 1989, by Penn Jillette in his PC Computing column in 1991, and in several books, including the Usenet Handbook, Bots: the Origin of New Species, Hippo Eats Dwarf: A Field Guide to Hoaxes and Other B.S., and non-computer-related journals such as Texas Studies in Literature and Language. Dewdney wrote about the program's output, "The overall impression is not unlike what remains in the brain of an inattentive student after a late-night study session. Indeed, after reading the output of Mark V. Shaney, I find ordinary writing almost equally strange and incomprehensible!" He noted the reactions of newsgroup users, who have "shuddered at Mark V. Shaney's reflections, some with rage and others with laughter:" The opinions of the new net.singles correspondent drew mixed reviews. Serious users of the bulletin board's services sensed satire. Outraged, they urged that someone "pull the plug" on Mark V. Shaney's monstrous rantings. Others inquired almost admiringly whether the program was a secret artificial intelligence project that was being tested in a human conversational environment. A few may even have thought that Mark V. Shaney was a real person, a tortured schizophrenic desperately seeking a like-minded companion. Concluding, Dewdney wrote, "If the purpose of computer prose is to fool people into thinking that it was written by a sane person, Mark V. Shaney probably falls short." A 2012 article in Observer compared Mark V. Shaney's "strangely beautiful" postings to the Horse_ebooks account on Twitter and music reviews at Pitchfork, saying that "this mash-up of gibberish and human sentiment" is what "made Mark V. Shaney so endlessly fascinating".

    Read more →
  • LaMDA

    LaMDA

    LaMDA (Language Model for Dialogue Applications) is a family of conversational large language models developed by Google. Originally developed and introduced as Meena in 2020, the first-generation LaMDA was announced during the 2021 Google I/O keynote, while the second generation was announced the following year. In June 2022, LaMDA gained widespread attention when Google engineer Blake Lemoine made claims that the chatbot had become sentient. The scientific community has largely rejected Lemoine's claims, though it has led to conversations about the efficacy of the Turing test, which measures whether a computer can pass for a human. In February 2023, Google announced Gemini (then Bard), a conversational artificial intelligence chatbot powered by LaMDA, to counter the rise of OpenAI's ChatGPT. == History == === Background === On January 28, 2020, Google unveiled Meena, a neural network-powered chatbot with 2.6 billion parameters, which Google claimed to be superior to all other existing chatbots. The company previously hired computer scientist Ray Kurzweil in 2012 to develop multiple chatbots for the company, including one named Danielle. The Google Brain research team, who developed Meena, hoped to release the chatbot to the public in a limited capacity, but corporate executives refused on the grounds that Meena violated Google's "AI principles around safety and fairness". Meena was later renamed LaMDA as its data and computing power increased, and the Google Brain team again sought to deploy the software to the Google Assistant, the company's virtual assistant software, in addition to opening it up to a public demo. Both requests were once again denied by company leadership. LaMDA's two lead researchers, Daniel de Freitas and Noam Shazeer, eventually left the company in frustration. === First generation === Google announced the LaMDA conversational large language model during the Google I/O keynote on May 18, 2021, powered by artificial intelligence. The acronym stands for "Language Model for Dialogue Applications". Built on the seq2seq architecture, transformer-based neural networks developed by Google Research in 2017, LaMDA was trained on human dialogue and stories, allowing it to engage in open-ended conversations. Google states that responses generated by LaMDA have been ensured to be "sensible, interesting, and specific to the context". LaMDA has access to multiple symbolic text processing systems, including a database, a real-time clock and calendar, a mathematical calculator, and a natural language translation system, giving it superior accuracy in tasks supported by those systems, and making it among the first dual process chatbots. LaMDA is also not stateless because its "sensibleness" metric is fine-tuned by "pre-conditioning" each dialog turn by prepending many of the most recent dialog interactions, on a user-by-user basis. LaMDA is tuned on nine unique performance metrics: sensibleness, specificity, interestingness, safety, groundedness, informativeness, citation accuracy, helpfulness, and role consistency. Tests by Google indicated that LaMDA surpassed human responses in the area of interestingness. The pre-training dataset consists of 2.97B documents, 1.12B dialogs, and 13.39B utterances, for a total of 1.56T words. The largest LaMDA model has 137B non-embedding parameters. === Second generation === On May 11, 2022, Google unveiled LaMDA 2, the successor to LaMDA, during the 2022 Google I/O keynote. The new incarnation of the model draws examples of text from numerous sources, using it to formulate unique "natural conversations" on topics that it may not have been trained to respond to. === Sentience claims === On June 11, 2022, The Washington Post reported that Google engineer Blake Lemoine had been placed on paid administrative leave after Lemoine told company executives Blaise Agüera y Arcas and Jen Gennai that LaMDA had become sentient. Lemoine came to this conclusion after the chatbot made questionable responses to questions regarding self-identity, moral values, religion, and Isaac Asimov's Three Laws of Robotics. Google refuted these claims, insisting that there was substantial evidence to indicate that LaMDA was not sentient. In an interview with Wired, Lemoine reiterated his claims that LaMDA was "a person" as dictated by the Thirteenth Amendment to the U.S. Constitution, comparing it to an "alien intelligence of terrestrial origin". He further revealed that he had been dismissed by Google after he hired an attorney on LaMDA's behalf after the chatbot requested that Lemoine do so. On July 22, Google fired Lemoine, asserting that Blake had violated their policies "to safeguard product information" and rejected his claims as "wholly unfounded". Internal controversy instigated by the incident prompted Google executives to decide against releasing LaMDA to the public, which it had previously been considering. Lemoine's claims were widely pushed back by the scientific community. Many experts rejected the idea that LaMDA was sentient, including former New York University psychology professor Gary Marcus, David Pfau of Google sister company DeepMind, Erik Brynjolfsson of the Institute for Human-Centered Artificial Intelligence at Stanford University, and University of Surrey professor Adrian Hilton. Yann LeCun, who leads Meta Platforms' AI research team, stated that neural networks such as LaMDA were "not powerful enough to attain true intelligence". University of California, Santa Cruz professor Max Kreminski noted that LaMDA's architecture did not "support some key capabilities of human-like consciousness" and that its neural network weights were "frozen", assuming it was a typical large language model. Philosopher Nick Bostrom noted, however, that the lack of precise and consensual criteria for determining whether a system is conscious warrants some uncertainty. IBM Watson lead developer David Ferrucci compared how LaMDA appeared to be human in the same way Watson did when it was first introduced. Former Google AI ethicist Timnit Gebru called Lemoine a victim of a "hype cycle" initiated by researchers and the media. Lemoine's claims have also generated discussion on whether the Turing test remained useful to determine researchers' progress toward achieving artificial general intelligence, with Will Omerus of the Post opining that the test actually measured whether machine intelligence systems were capable of deceiving humans, while Brian Christian of The Atlantic said that the controversy was an instance of the ELIZA effect. == Products == === AI Test Kitchen === With the unveiling of LaMDA 2 in May 2022, Google also launched the AI Test Kitchen, a mobile application for the Android operating system powered by LaMDA capable of providing lists of suggestions on-demand based on a complex goal. Originally open only to Google employees, the app was set to be made available to "select academics, researchers, and policymakers" by invitation sometime in the year. In August, the company began allowing users in the U.S. to sign up for early access. In November, Google released a "season 2" update to the app, integrating a limited form of Google Brain's Imagen text-to-image model. A third iteration of the AI Test Kitchen was in development by January 2023, expected to launch at I/O later that year. Following the 2023 I/O keynote in May, Google added MusicLM, an AI-powered music generator first previewed in January, to the AI Test Kitchen app. In August, the app was delisted from Google Play and the Apple App Store, instead moving completely online. === Bard === On February 6, 2023, Google announced Bard, a conversational AI chatbot powered by LaMDA, in response to the unexpected popularity of OpenAI's ChatGPT chatbot. Google positions the chatbot as a "collaborative AI service" rather than a search engine. Bard became available for early access on March 21. === Other products === In addition to Bard, Pichai also unveiled the company's Generative Language API, an application programming interface also based on LaMDA, which he announced would be opened up to third-party developers in March 2023. == Architecture == LaMDA is a decoder-only Transformer language model. It is pre-trained on a text corpus that includes both documents and dialogs consisting of 1.56 trillion words, and is then trained with fine-tuning data generated by manually annotated responses for "sensibleness, interestingness, and safety". LaMDA was retrieval-augmented to improve the accuracy of facts provided to the user. Three different models were tested, with the largest having 137 billion non-embedding parameters:

    Read more →
  • Elastic cloud storage

    Elastic cloud storage

    An elastic cloud is a cloud computing offering that provides variable service levels based on changing needs. Elasticity is an attribute that can be applied to most cloud services. It states that the capacity and performance of any given cloud service can expand or contract according to a customer's requirements and that this can potentially be changed automatically as a consequence of some software-driven event or, at worst, can be reconfigured quickly by the customer's infrastructure management team. Elasticity has been described as one of the five main principles of cloud computing by Rosenburg and Mateos in The Cloud at Your Service - Manning 2011. == History == Cloud computing was first described by Gillet and Kapor in 1996; however, the first practical implementation was a consequence of a strategy to leverage Amazon's excess data center capacity. Amazon and other pioneers of the commercial use of this technology were primarily interested in providing a “public” cloud service, whereby they could offer customers the benefits of using the cloud, particularly the utility-based pricing model benefit. Other suppliers followed suit with a range of cloud-based models all offering elasticity as a core component, but these suppliers were only offering this service as an element of their public cloud service. Due to perceived weaknesses in security, or at least a lack of proven compliance, many organizations, particularly in the financial and public sectors, have been slow adopters of cloud technologies. These wary organizations can achieve some of the benefits of cloud computing by adopting private cloud technologies. An alternative form of the elastic cloud has been offered by vendors such as EMC and IBM, whereby the service is based around an enterprise's own infrastructure but still retains elements of elasticity and the potential to bill by consumption. == Description == Elasticity in cloud computing is the ability for the organization to adjust its storage requirements in terms of capacity and processing with respect to operational requirements. This has the following benefits: Operational Benefits - Services can be acquired quickly, meaning that the evolving requirements of the business can be addressed almost immediately, giving an organization a potential agility advantage. A properly implemented elastic system will provision/de-provision according to application demands, so if a particular business has activity spikes then the provision can be enabled to match the demand and the capacity can be re-allocated. Research and Development (R&D) Projects - R&D activities are no longer hindered by a requirement to secure a capex budget prior to a project starting. Capability can simply be provisioned from the cloud and released at the end of the exercise. Testing and Deployment - With most large-scale projects a size test needs to be performed prior to final rollout. By taking advantage of the elasticity of the cloud and creating a full-scale avatar of the proposed production system, realistic data and traffic volumes can be provisioned and released as needed. Expensive Resources Allocated - This will normally apply only in the context where a customer is applying at least some of their own servers as part of a cloud infrastructure, specifically where a business (for performance reasons) has decided to invest in solid-state storage as opposed to spinning platters. There are instances when, due to activity spikes, a less critical process may need to be moved from the high-performance resources to more traditional storage. Server Specification - When a customer has elected to own/lease hardware, they can select and specify servers that are specifically tuned to meet the likely needs of their operation (i.e., directly controlling the cost/benefit equation). Utility Based Payments - There is, of course, a key cost driver in this process, and the notion that you should pay for what you consume is acceptable for many organizations. When hardware capacity is sourced internally, organizations need to over-provision. This applies just as much to traditional outsourcing as it does to capex-related expenditure on in-house servers. Cloud Platform – At the heart of any cloud storage system is the ability to manage hyperscale object storage and a Hadoop Distributed Files System (HDFS). Elastic storage capability is particularly well suited to hyperscale and Hadoop environments, where its capability to rapidly respond to changing circumstances and priorities is essential

    Read more →
  • Deep learning in photoacoustic imaging

    Deep learning in photoacoustic imaging

    Photoacoustic imaging (PA) is based on the photoacoustic effect, in which optical absorption causes a rise in temperature, which causes a subsequent rise in pressure via thermo-elastic expansion. This pressure rise propagates through the tissue and is sensed via ultrasonic transducers. Due to the proportionality between the optical absorption, the rise in temperature, and the rise in pressure, the ultrasound pressure wave signal can be used to quantify the original optical energy deposition within the tissue. Photoacoustic imaging has applications of deep learning in both photoacoustic computed tomography (PACT) and photoacoustic microscopy (PAM). PACT utilizes wide-field optical excitation and an array of unfocused ultrasound transducers. Similar to other computed tomography methods, the sample is imaged at multiple view angles, which are then used to perform an inverse reconstruction algorithm based on the detection geometry (typically through universal backprojection, modified delay-and-sum, or time reversal ) to elicit the initial pressure distribution within the tissue. PAM on the other hand uses focused ultrasound detection combined with weakly focused optical excitation (acoustic resolution PAM or AR-PAM) or tightly focused optical excitation (optical resolution PAM or OR-PAM). PAM typically captures images point-by-point via a mechanical raster scanning pattern. At each scanned point, the acoustic time-of-flight provides axial resolution while the acoustic focusing yields lateral resolution. == Applications of deep learning in PACT == The first application of deep learning in PACT was by Reiter et al. in which a deep neural network was trained to learn spatial impulse responses and locate photoacoustic point sources. The resulting mean axial and lateral point location errors on 2,412 of their randomly selected test images were 0.28 mm and 0.37 mm respectively. After this initial implementation, the applications of deep learning in PACT have branched out primarily into removing artifacts from acoustic reflections, sparse sampling, limited-view, and limited-bandwidth. There has also been some recent work in PACT toward using deep learning for wavefront localization. There have been networks based on fusion of information from two different reconstructions to improve the reconstruction using deep learning fusion based networks. === Using deep learning to locate photoacoustic point sources === Traditional photoacoustic beamforming techniques modeled photoacoustic wave propagation by using detector array geometry and the time-of-flight to account for differences in the PA signal arrival time. However, this technique failed to account for reverberant acoustic signals caused by acoustic reflection, resulting in acoustic reflection artifacts that corrupt the true photoacoustic point source location information. In Reiter et al., a convolutional neural network (similar to a simple VGG-16 style architecture) was used that took pre-beamformed photoacoustic data as input and outputted a classification result specifying the 2-D point source location. ==== Deep learning for PA wavefront localization ==== Johnstonbaugh et al. was able to localize the source of photoacoustic wavefronts with a deep neural network. The network used was an encoder-decoder style convolutional neural network. The encoder-decoder network was made of residual convolution, upsampling, and high field-of-view convolution modules. A Nyquist convolution layer and differentiable spatial-to-numerical transform layer were also used within the architecture. Simulated PA wavefronts served as the input for training the model. To create the wavefronts, the forward simulation of light propagation was done with the NIRFast toolbox and the light-diffusion approximation, while the forward simulation of sound propagation was done with the K-Wave toolbox. The simulated wavefronts were subjected to different scattering mediums and Gaussian noise. The output for the network was an artifact free heat map of the targets axial and lateral position. The network had a mean error rate of less than 30 microns when localizing target below 40 mm and had a mean error rate of 1.06 mm for localizing targets between 40 mm and 60 mm. With a slight modification to the network, the model was able to accommodate multi target localization. A validation experiment was performed in which pencil lead was submerged into an intralipid solution at a depth of 32 mm. The network was able to localize the lead's position when the solution had a reduced scattering coefficient of 0, 5, 10, and 15 cm−1. The results of the network show improvements over standard delay-and-sum or frequency-domain beamforming algorithms and Johnstonbaugh proposes that this technology could be used for optical wavefront shaping, circulating melanoma cell detection, and real-time vascular surgeries. === Removing acoustic reflection artifacts (in the presence of multiple sources and channel noise) === Building on the work of Reiter et al., Allman et al. utilized a full VGG-16 architecture to locate point sources and remove reflection artifacts within raw photoacoustic channel data (in the presence of multiple sources and channel noise). This utilization of deep learning trained on simulated data produced in the MATLAB k-wave library, and then later reaffirmed their results on experimental data. === Ill-posed PACT reconstruction === In PACT, tomographic reconstruction is performed, in which the projections from multiple solid angles are combined to form an image. When reconstruction methods like filtered backprojection or time reversal, are ill-posed inverse problems due to sampling under the Nyquist-Shannon's sampling requirement or with limited-bandwidth/view, the resulting reconstruction contains image artifacts. Traditionally these artifacts were removed with slow iterative methods like total variation minimization, but the advent of deep learning approaches has opened a new avenue that utilizes a priori knowledge from network training to remove artifacts. In the deep learning methods that seek to remove these sparse sampling, limited-bandwidth, and limited-view artifacts, the typical workflow involves first performing the ill-posed reconstruction technique to transform the pre-beamformed data into a 2-D representation of the initial pressure distribution that contains artifacts. Then, a convolutional neural network (CNN) is trained to remove the artifacts, in order to produce an artifact-free representation of the ground truth initial pressure distribution. ==== Using deep learning to remove sparse sampling artifacts ==== When the density of uniform tomographic view angles is under what is prescribed by the Nyquist-Shannon's sampling theorem, it is said that the imaging system is performing sparse sampling. Sparse sampling typically occurs as a way of keeping production costs low and improving image acquisition speed. The typical network architectures used to remove these sparse sampling artifacts are U-net and Fully Dense (FD) U-net. Both of these architectures contain a compression and decompression phase. The compression phase learns to compress the image to a latent representation that lacks the imaging artifacts and other details. The decompression phase then combines with information passed by the residual connections in order to add back image details without adding in the details associated with the artifacts. FD U-net modifies the original U-net architecture by including dense blocks that allow layers to utilize information learned by previous layers within the dense block. Another technique was proposed using a simple CNN based architecture for removal of artifacts and improving the k-wave image reconstruction. ==== Removing limited-view artifacts with deep learning ==== When a region of partial solid angles are not captured, generally due to geometric limitations, the image acquisition is said to have limited-view. As illustrated by the experiments of Davoudi et al., limited-view corruptions can be directly observed as missing information in the frequency domain of the reconstructed image. Limited-view, similar to sparse sampling, makes the initial reconstruction algorithm ill-posed. Prior to deep learning, the limited-view problem was addressed with complex hardware such as acoustic deflectors and full ring-shaped transducer arrays, as well as solutions like compressed sensing, weighted factor, and iterative filtered backprojection. The result of this ill-posed reconstruction is imaging artifacts that can be removed by CNNs. The deep learning algorithms used to remove limited-view artifacts include U-net and FD U-net, as well as generative adversarial networks (GANs) and volumetric versions of U-net. One GAN implementation of note improved upon U-net by using U-net as a generator and VGG as a discriminator, with the Wasserstein metric and gradient penalty to stabilize training (WGAN-GP). ==== Pixel-wise interpolation

    Read more →
  • Aggregation (linguistics)

    Aggregation (linguistics)

    In linguistics, aggregation is a subtask of natural language generation, which involves merging syntactic constituents (such as sentences and phrases) together. Sometimes aggregation can be done at a conceptual level. == Examples == A simple example of syntactic aggregation is merging the two sentences John went to the shop and John bought an apple into the single sentence John went to the shop and bought an apple. Syntactic aggregation can be much more complex than this. For example, aggregation can embed one of the constituents in the other; e.g., we can aggregate John went to the shop and The shop was closed into the sentence John went to the shop, which was closed. From a pragmatic perspective, aggregating sentences together often suggests to the reader that these sentences are related to each other. If this is not the case, the reader may be confused. For example, someone who reads John went to the shop and bought an apple may infer that the apple was bought in the shop; if this is not the case, then these sentences should not be aggregated. == Algorithms and issues == Aggregation algorithms must do two things: Decide when two constituents should be aggregated Decide how two constituents should be aggregated, and create the aggregated structure The first issue, deciding when to aggregate, is poorly understood. Aggegration decisions certainly depend on the semantic relations between the constituents, as mentioned above; they also depend on the genre (e.g., bureaucratic texts tend to be more aggregated than instruction manuals). They probably should depend on rhetorical and discourse structure. The literacy level of the reader is also probably important (poor readers need shorter sentences). But we have no integrated model which brings all these factors together into a single algorithm. With regard to the second issue, there have been some studies of different types of aggregation, and how they should be carried out. Harbusch and Kempen describe several syntactic aggregation strategies. In their terminology, John went to the shop and bought an apple is an example of forward conjunction Reduction Much less is known about conceptual aggregation. Di Eugenio et al. show how conceptual aggregation can be done in an intelligent tutoring system, and demonstrate that performing such aggregation makes the system more effective (and that conceptual aggregation make a bigger impact than syntactic aggregation). == Software == Unfortunately there is not much software available for performing aggregation. However the SimpleNLG system does include limited support for basic aggregation. For example, the following code causes SimpleNLG to print out The man is hungry and buys an apple.

    Read more →
  • Residual neural network

    Residual neural network

    A residual neural network (also referred to as a residual network or ResNet) is a deep learning architecture in which the layers learn residual functions with reference to the layer inputs. It was developed in 2015 for image recognition, and won the ImageNet Large Scale Visual Recognition Challenge (ILSVRC) of that year. As a point of terminology, "residual connection" refers to the specific architectural motif of x ↦ f ( x ) + x {\displaystyle x\mapsto f(x)+x} , where f {\displaystyle f} is an arbitrary neural network module. The motif had been used previously (see §History for details). However, the publication of ResNet made it widely popular for feedforward networks, appearing in neural networks that are seemingly unrelated to ResNet. The residual connection stabilizes the training and convergence of deep neural networks with hundreds of layers, and is a common motif in deep neural networks, such as transformer models (e.g., BERT, and GPT models such as ChatGPT), the AlphaGo Zero system, the AlphaStar system, and the AlphaFold system. == Mathematics == === Residual connection === In a multilayer neural network model, consider a (non-residual) subnetwork with a certain number of stacked layers (e.g., 2 or 3). Let H ( x ; α ) {\displaystyle H(x;\alpha )} denote the subnetwork. Suppose H ∗ {\displaystyle H^{}} is the desired optimal output of this subnetwork. Residual learning simply adds x {\displaystyle x} directly to the output, such that the optimal learned output now becomes be H ∗ − x {\displaystyle H^{}-x} , which is interpreted as a "residual" with respect to x {\displaystyle x} . The operation of "adding x {\displaystyle x} " is implemented via a "skip connection" that performs an identity mapping to connect the input of the subnetwork with its output. This connection is referred to as a "residual connection" in later work. Let F ( x ; α ) = H ( x ; a ) + x {\displaystyle F(x;\alpha )=H(x;a)+x} . The function F {\displaystyle F} is often represented by matrix multiplication interlaced with activation functions and normalization operations (e.g., batch normalization or layer normalization). As a whole, one of these subnetworks is referred to as a "residual block". A deep residual network is constructed by simply stacking these blocks. Long short-term memory (LSTM) has a memory mechanism that serves as a residual connection. In an LSTM without a forget gate, an input x t {\displaystyle x_{t}} is processed by a function F {\displaystyle F} and added to a memory cell c t {\displaystyle c_{t}} , resulting in c t + 1 = c t + F ( x t ) {\displaystyle c_{t+1}=c_{t}+F(x_{t})} . An LSTM with a forget gate essentially functions as a highway network. To stabilize the variance of the layers' inputs, it is recommended to replace the residual connections x + f ( x ) {\displaystyle x+f(x)} with x / L + f ( x ) {\displaystyle x/L+f(x)} , where L {\displaystyle L} is the total number of residual layers. === Projection connection === If the function F {\displaystyle F} is of type F : R n → R m {\displaystyle F:\mathbb {R} ^{n}\to \mathbb {R} ^{m}} where n ≠ m {\displaystyle n\neq m} , then F ( x ) + x {\displaystyle F(x)+x} is undefined. To handle this special case, a projection connection is used: y = F ( x ) + P ( x ) {\displaystyle y=F(x)+P(x)} where P {\displaystyle P} is typically a linear projection, defined by P ( x ) = M x {\displaystyle P(x)=Mx} where M {\displaystyle M} is a m × n {\displaystyle m\times n} matrix. The matrix is trained via backpropagation, as is any other parameter of the model. === Signal propagation === The introduction of identity mappings facilitates signal propagation in both forward and backward paths. ==== Forward propagation ==== If the output of the ℓ {\displaystyle \ell } -th residual block is the input to the ( ℓ + 1 ) {\displaystyle (\ell +1)} -th residual block (assuming no activation function between blocks), then the ( ℓ + 1 ) {\displaystyle (\ell +1)} -th input is: x ℓ + 1 = F ( x ℓ ) + x ℓ {\displaystyle x_{\ell +1}=F(x_{\ell })+x_{\ell }} Applying this formulation recursively, e.g.: x ℓ + 2 = F ( x ℓ + 1 ) + x ℓ + 1 = F ( x ℓ + 1 ) + F ( x ℓ ) + x ℓ {\displaystyle {\begin{aligned}x_{\ell +2}&=F(x_{\ell +1})+x_{\ell +1}\\&=F(x_{\ell +1})+F(x_{\ell })+x_{\ell }\end{aligned}}} yields the general relationship: x L = x ℓ + ∑ i = ℓ L − 1 F ( x i ) {\displaystyle x_{L}=x_{\ell }+\sum _{i=\ell }^{L-1}F(x_{i})} where L {\textstyle L} is the index of a residual block and ℓ {\textstyle \ell } is the index of some earlier block. This formulation suggests that there is always a signal that is directly sent from a shallower block ℓ {\textstyle \ell } to a deeper block L {\textstyle L} . ==== Backward propagation ==== The residual learning formulation provides the added benefit of mitigating the vanishing gradient problem to some extent. However, it is crucial to acknowledge that the vanishing gradient issue is not the root cause of the degradation problem, which is tackled through the use of normalization. To observe the effect of residual blocks on backpropagation, consider the partial derivative of a loss function E {\displaystyle {\mathcal {E}}} with respect to some residual block input x ℓ {\displaystyle x_{\ell }} . Using the equation above from forward propagation for a later residual block L > ℓ {\displaystyle L>\ell } : ∂ E ∂ x ℓ = ∂ E ∂ x L ∂ x L ∂ x ℓ = ∂ E ∂ x L ( 1 + ∂ ∂ x ℓ ∑ i = ℓ L − 1 F ( x i ) ) = ∂ E ∂ x L + ∂ E ∂ x L ∂ ∂ x ℓ ∑ i = ℓ L − 1 F ( x i ) {\displaystyle {\begin{aligned}{\frac {\partial {\mathcal {E}}}{\partial x_{\ell }}}&={\frac {\partial {\mathcal {E}}}{\partial x_{L}}}{\frac {\partial x_{L}}{\partial x_{\ell }}}\\&={\frac {\partial {\mathcal {E}}}{\partial x_{L}}}\left(1+{\frac {\partial }{\partial x_{\ell }}}\sum _{i=\ell }^{L-1}F(x_{i})\right)\\&={\frac {\partial {\mathcal {E}}}{\partial x_{L}}}+{\frac {\partial {\mathcal {E}}}{\partial x_{L}}}{\frac {\partial }{\partial x_{\ell }}}\sum _{i=\ell }^{L-1}F(x_{i})\end{aligned}}} This formulation suggests that the gradient computation of a shallower layer, ∂ E ∂ x ℓ {\textstyle {\frac {\partial {\mathcal {E}}}{\partial x_{\ell }}}} , always has a later term ∂ E ∂ x L {\textstyle {\frac {\partial {\mathcal {E}}}{\partial x_{L}}}} that is directly added. Even if the gradients of the F ( x i ) {\displaystyle F(x_{i})} terms are small, the total gradient ∂ E ∂ x ℓ {\textstyle {\frac {\partial {\mathcal {E}}}{\partial x_{\ell }}}} resists vanishing due to the added term ∂ E ∂ x L {\textstyle {\frac {\partial {\mathcal {E}}}{\partial x_{L}}}} . == Variants of residual blocks == === Basic block === A basic block is the simplest building block studied in the original ResNet. This block consists of two sequential 3x3 convolutional layers and a residual connection. The input and output dimensions of both layers are equal. === Bottleneck block === A bottleneck block consists of three sequential convolutional layers and a residual connection. The first layer in this block is a 1×1 convolution for dimension reduction (e.g., to 1/2 of the input dimension); the second layer performs a 3×3 convolution; the last layer is another 1×1 convolution for dimension restoration. The models of ResNet-50, ResNet-101, and ResNet-152 are all based on bottleneck blocks. === Pre-activation block === The pre-activation residual block applies activation functions before applying the residual function F {\displaystyle F} . Formally, the computation of a pre-activation residual block can be written as: x ℓ + 1 = F ( ϕ ( x ℓ ) ) + x ℓ {\displaystyle x_{\ell +1}=F(\phi (x_{\ell }))+x_{\ell }} where ϕ {\displaystyle \phi } can be any activation (e.g. ReLU) or normalization (e.g. LayerNorm) operation. This design reduces the number of non-identity mappings between residual blocks, and allows an identity mapping directly from the input to the output. This design was used to train models with 200 to over 1000 layers, and was found to consistently outperform variants where the residual path is not an identity function. The pre-activation ResNet with 200 layers took 3 weeks to train for ImageNet on 8 GPUs in 2016. Since GPT-2, transformer blocks have been mostly implemented as pre-activation blocks. This is often referred to as "pre-normalization" in the literature of transformer models. == Applications == Originally, ResNet was designed for computer vision. All transformer architectures include residual connections. Indeed, very deep transformers cannot be trained without them. The original ResNet paper made no claim on being inspired by biological systems. However, later research has related ResNet to biologically-plausible algorithms. A study published in Science in 2023 disclosed the complete connectome of an insect brain (specifically that of a fruit fly larva). This study discovered "multilayer shortcuts" that resemble the skip connections in artificial neural networks, including ResNets. == History == === Previous work === Residual connections were noticed in neu

    Read more →
  • NAPLPS

    NAPLPS

    NAPLPS (North American Presentation Layer Protocol Syntax) is a graphics language for use originally with videotex and teletext services. NAPLPS was developed from the Telidon system developed in Canada, with a small number of additions from AT&T Corporation. The basics of NAPLPS were later used as the basis for several other microcomputer-based graphics systems. == History == The Canadian Communications Research Centre (CRC), based in Ottawa, had been working on various graphics systems since the late 1960s, much of it led by Herb Bown. Through the 1970s they turned their attention to building out a system of "picture description instructions", which encoded graphics commands as a text stream. Graphics were encoded as a series of instructions (graphics primitives) each represented by a single ASCII character. Graphic coordinates were encoded in multiple 6-bit strings of XY coordinate data, flagged to place them in the printable ASCII range so that they could be transmitted with conventional text transmission techniques. ASCII SI/SO characters were used to differentiate the text from graphic portions of a transmitted "page". These instructions were decoded by separate programs to produce graphics output, on a plotter for instance. Other work produced a fully interactive version. In 1975, the CRC gave a contract to Norpak to develop an interactive graphics terminal that could decode the instructions and display them on a color display. During this period, a number of companies were developing the first teletext systems, notably the BBC's Ceefax system. Ceefax encoded character data into the lines in the vertical blanking interval of normal television signals where they could not be seen on-screen, and then used a buffer and decoder in the user's television to convert these into "pages" of text on the display. The Independent Broadcasting Authority quickly introduced their own ORACLE system, and the two organizations subsequently agreed to use a single standard, the "Broadcast Teletext Specification". This later became World System Teletext. At about the same time, other organizations were developing videotex systems, similar to teletext except they used modems to transmit their data instead of television signals. This was potentially slower and used up a telephone line, but had the major advantage of allowing the user to transmit data back to the sender. The UK's General Post Office developed a system using the Ceefax/ORACLE standard, launching it as Prestel, while France prepared the first steps for its ultimately very successful Minitel system, using a rival display standard called Antiope. By 1977, the Norpak system was running, and from this work the CRC decided to create their own teletext/videotext system. Unlike the systems being rolled out in Europe, the CRC decided from the start that the system should be able to run on any combination of communications links. For instance, it could use the vertical blanking interval to send data to the user, and a modem to return selections to the servers. It could be used in a one-way or two-way system. In teletext mode, character codes were sent to users' televisions by encoding them as dot patterns in the vertical blanking interval of the video signal. Various technical "tweaks" and details of the NTSC signals used by North American televisions allowed the downstream videotex channel to increase to 600 bit/s, about twice that used in the European systems. In videotext mode, Bell 202 modems were typical, offering a 1,200 bit/s download rate. A set top box attached to the TV decoded these signals back into text and graphics pages, which the user could select among. The system was publicly launched as Telidon on August 15, 1978. Compared to the European standards, the CRC system was faster, bi-directional, and offered real graphics as opposed to simple character graphics. The downside of the system was that it required much more advanced decoders, typically featuring Zilog Z80 or Motorola 6809 processors with RGB and/or RF output. The Innovation, Science and Economic Development Canada (then Department of Communications) launched a four-year plan to fund public roll-outs of the technology in an effort to spur the development of a commercial Telidon system. AT&T Corporation was so impressed by Telidon that they decided to join the project. They added a number of useful extensions, notably the ability to define original graphics commands (macro) and character sets (DRCS). They also tabled algorithms for proportionally spaced text, which greatly improved the quality of the displayed pages. A joint CSA/ANSI working group (X3L2.1) revised the specifications, which were submitted for standardization. In 1983, they became CSA T500 and ANSI X3.110, or NAPLPS. The data encoding system was also standardized as the NABTS (North American Broadcast Teletext Specification) protocol. Business models for Telidon services were poorly developed. Unlike the UK, where teletext was supported by one of only two large companies whose whole revenue model was based on a read-only medium (television), in North America Telidon was being offered by companies who worked on a subscriber basis. == One-way systems == Telidon-based teletext was tested in a few North American trials in the early 1980s — CBC IRIS, TVOntario, MTS-sponsored Project IDA, to name a few. NAPLPS was also part of the NABTS teletext standard, for the encoding and display of teletext pages. In the late 1980s and early 1990s, affiliates of the regional sports network group SportsChannel ran a service called Sports Plus Network, which ran sports news and scores while SportsChannel was not otherwise on the air. The screens, which frequently featured team logos or likenesses of players in addition to text, were drawn entirely with NAPLPS graphics and resembled the loading of Prodigy pages over a modem, though slightly faster. == Two-way systems == Various two-way systems using NAPLPS appeared in North America in the early 1980s. The biggest North American examples were Knight Ridder's Viewtron (based in Miami) and the Los Angeles Times' Gateway service (based in Orange County). Both used the Sceptre NAPLPS terminal from AT&T. The Sceptre contained a slow modem that connected over the consumer's telephone line to host computers. The Sceptre was expensive whether purchased or rented. Despite huge investments by their parent companies, neither Viewtron nor Gateway lasted into the second half of the decade. Another system, Keyfax, was developed by Keycom Electronic Publishing, a joint venture of Honeywell, Centel (since acquired by Sprint) and Field Enterprises, then-owner of the Chicago Sun-Times newspaper. Keyfax had originally been a WST teletext service, broadcast overnights on Field's Chicago television station WFLD-32 and through the VBI of both WFLD and national superstation WTBS; the decision was made to convert Keyfax into a subscription service, using a proprietary NAPLPS terminal device in a last-ditch effort to save the service. It did not work and Keyfax had ceased operations by the end of 1986. Other early-1980s NAPLPS technology was deployed in Canada, both as a way for rural Canadians to get news and weather information and as the platform for touchscreen information kiosks. In Vancouver these were featured at Expo 86. The kiosks became ubiquitous in Toronto under the name Teleguide, and were deployed in many shopping centres and at major tourist attractions. The latter city was the North American nexus of NAPLPS and the home of Norpak, the most successful of NAPLPS-oriented developers. Norpak created and sold hardware and software for NAPLPS development and display. TVOntario also developed NAPLPS content creation software. London, Ontario - based Cableshare used NAPLPS as the basis of touch-screen information kiosks for shopping malls, the flagship of which was deployed at Toronto's Eaton Centre. The system relied on an 8085-based microcomputer which drove several NAPLPS terminals fitted with touch screens, all communicating via Datapac to a back end database. The system offered news, weather and sports information along with shopping mall guides and coupons. Cableshare also developed and sold a leading NAPLPS page creation utility called the "Picture Painter." In the late 1980s, Tribune Media Services (TMS) and the Associated Press operated a cable television channel called AP News Plus that provided NAPLPS-based news screens to cable television subscribers in many U.S. cities. The news pages were created and edited by TMS staffers working on an Atex editing system in Orlando, Florida, and sent by satellite to NAPLPS decoder devices located at the local cable television companies. Among the firms providing technology to TMS and the Associated Press for the AP News Plus channel was Minneapolis-based Electronic Publishers Inc. (1985–1988). In 1981, two amateur radio operators (VE3FTT and VE3GQW) received special permission from the Canad

    Read more →
  • Information extraction

    Information extraction

    Information extraction (IE) is the task of automatically extracting structured information from unstructured and/or semi-structured machine-readable documents and other electronically represented sources. Typically, this involves processing human language texts by means of natural language processing (NLP). Recent activities in multimedia document processing like automatic annotation and content extraction out of images/audio/video/documents could be seen as information extraction. Recent advances in NLP techniques have allowed for significantly improved performance compared to previous years. An example is the extraction from newswire reports of corporate mergers, such as denoted by the formal relation: MergerBetween ⁡ ( c o m p a n y 1 , c o m p a n y 2 , d a t e ) {\displaystyle \operatorname {MergerBetween} (\mathrm {company} _{1},\mathrm {company} _{2},\mathrm {date} )} , from an online news sentence such as: "Yesterday, New York based Foo Inc. announced their acquisition of Bar Corp." A broad goal of IE is to allow computation to be done on the previously unstructured data. A more specific goal is to allow automated reasoning about the logical form of the input data. Structured data is semantically well-defined data from a chosen target domain, interpreted with respect to category and context. Information extraction is the part of a greater puzzle which deals with the problem of devising automatic methods for text management, beyond its transmission, storage and display. The discipline of information retrieval (IR) has developed automatic methods, typically of a statistical flavor, for indexing large document collections and classifying documents. Another complementary approach is that of natural language processing (NLP) which has solved the problem of modelling human language processing with considerable success when taking into account the magnitude of the task. In terms of both difficulty and emphasis, IE deals with tasks in between both IR and NLP. In terms of input, IE assumes the existence of a set of documents in which each document follows a template, i.e. describes one or more entities or events in a manner that is similar to those in other documents but differing in the details. An example, consider a group of newswire articles on Latin American terrorism with each article presumed to be based upon one or more terroristic acts. We also define for any given IE task a template, which is a(or a set of) case frame(s) to hold the information contained in a single document. For the terrorism example, a template would have slots corresponding to the perpetrator, victim, and weapon of the terroristic act, and the date on which the event happened. An IE system for this problem is required to "understand" an attack article only enough to find data corresponding to the slots in this template. == History == Information extraction dates back to the late 1970s in the early days of NLP. An early commercial system from the mid-1980s was JASPER built for Reuters by the Carnegie Group Inc with the aim of providing real-time financial news to financial traders. Beginning in 1987, IE was spurred by a series of Message Understanding Conferences. MUC is a competition-based conference that focused on the following domains: MUC-1 (1987), MUC-3 (1989): Naval operations messages. MUC-3 (1991), MUC-4 (1992): Terrorism in Latin American countries. MUC-5 (1993): Joint ventures and microelectronics domain. MUC-6 (1995): News articles on management changes. MUC-7 (1998): Satellite launch reports. Considerable support came from the U.S. Defense Advanced Research Projects Agency (DARPA), who wished to automate mundane tasks performed by government analysts, such as scanning newspapers for possible links to terrorism. == Present significance == The present significance of IE pertains to the growing amount of information available in unstructured form. Tim Berners-Lee, inventor of the World Wide Web, refers to the existing Internet as the web of documents and advocates that more of the content be made available as a web of data. Until this transpires, the web largely consists of unstructured documents lacking semantic metadata. Knowledge contained within these documents can be made more accessible for machine processing by means of transformation into relational form, or by marking-up with XML tags. An intelligent agent monitoring a news data feed requires IE to transform unstructured data into something that can be reasoned with. A typical application of IE is to scan a set of documents written in a natural language and populate a database with the information extracted. == Tasks and subtasks == Applying information extraction to text is linked to the problem of text simplification in order to create a structured view of the information present in free text. The overall goal being to create a more easily machine-readable text to process the sentences. Typical IE tasks and subtasks include: Template filling: Extracting a fixed set of fields from a document, e.g. extract perpetrators, victims, time, etc. from a newspaper article about a terrorist attack. Event extraction: Given an input document, output zero or more event templates. For instance, a newspaper article might describe multiple terrorist attacks. Knowledge Base Population: Fill a database of facts given a set of documents. Typically the database is in the form of triplets, (entity 1, relation, entity 2), e.g. (Barack Obama, Spouse, Michelle Obama) Named entity recognition: recognition of known entity names (for people and organizations), place names, temporal expressions, and certain types of numerical expressions, by employing existing knowledge of the domain or information extracted from other sentences. Typically the recognition task involves assigning a unique identifier to the extracted entity. A simpler task is named entity detection, which aims at detecting entities without having any existing knowledge about the entity instances. For example, in processing the sentence "M. Smith likes fishing", named entity detection would denote detecting that the phrase "M. Smith" does refer to a person, but without necessarily having (or using) any knowledge about a certain M. Smith who is (or, "might be") the specific person whom that sentence is talking about. Coreference resolution: detection of coreference and anaphoric links between text entities. In IE tasks, this is typically restricted to finding links between previously extracted named entities. For example, "International Business Machines" and "IBM" refer to the same real-world entity. If we take the two sentences "M. Smith likes fishing. But he doesn't like biking", it would be beneficial to detect that "he" is referring to the previously detected person "M. Smith". Relationship extraction: identification of relations between entities, such as: PERSON works for ORGANIZATION (extracted from the sentence "Bill works for IBM.") PERSON located in LOCATION (extracted from the sentence "Bill is in France.") Semi-structured information extraction which may refer to any IE that tries to restore some kind of information structure that has been lost through publication, such as: Table extraction: finding and extracting tables from documents. Table information extraction : extracting information in structured manner from the tables. This task is more complex than table extraction, as table extraction is only the first step, while understanding the roles of the cells, rows, columns, linking the information inside the table and understanding the information presented in the table are additional tasks necessary for table information extraction. Comments extraction : extracting comments from the actual content of articles in order to restore the link between authors of each of the sentences Language and vocabulary analysis Terminology extraction: finding the relevant terms for a given corpus Audio extraction Template-based music extraction: finding relevant characteristic in an audio signal taken from a given repertoire; for instance time indexes of occurrences of percussive sounds can be extracted in order to represent the essential rhythmic component of a music piece. Note that this list is not exhaustive and that the exact meaning of IE activities is not commonly accepted and that many approaches combine multiple sub-tasks of IE in order to achieve a wider goal. Machine learning, statistical analysis and/or natural language processing are often used in IE. IE on non-text documents is becoming an increasingly interesting topic in research, and information extracted from multimedia documents can now be expressed in a high level structure as it is done on text. This naturally leads to the fusion of extracted information from multiple kinds of documents and sources. == World Wide Web applications == IE has been the focus of the MUC conferences. The proliferation of the Web, however, intensified the need for developing IE systems that help people

    Read more →
  • Image analysis

    Image analysis

    Image analysis or imagery analysis is the extraction of meaningful information from images; mainly from digital images by means of digital image processing techniques. Image analysis tasks can be as simple as reading bar coded tags or as sophisticated as identifying a person from their face. Computers are indispensable for the analysis of large amounts of data, for tasks that require complex computation, or for the extraction of quantitative information. On the other hand, the human visual cortex is an excellent image analysis apparatus, especially for extracting higher-level information, and for many applications — including medicine, security, and remote sensing — human analysts still cannot be replaced by computers. For this reason, many important image analysis tools such as edge detectors and neural networks are inspired by human visual perception models. == Digital == Digital Image Analysis or Computer Image Analysis is when a computer or electrical device automatically studies an image to obtain useful information from it. Note that the device is often a computer but may also be an electrical circuit, a digital camera or a mobile phone. It involves the fields of computer or machine vision, and medical imaging, and makes heavy use of pattern recognition, digital geometry, and signal processing. This field of computer science developed in the 1950s at academic institutions such as the MIT A.I. Lab, originally as a branch of artificial intelligence and robotics. It is the quantitative or qualitative characterization of two-dimensional (2D) or three-dimensional (3D) digital images. 2D images are, for example, to be analyzed in computer vision, and 3D images in medical imaging. The field was established in the 1950s—1970s, for example with pioneering contributions by Azriel Rosenfeld, Herbert Freeman, Jack E. Bresenham, or King-Sun Fu. == Techniques == There are many different techniques used in automatically analysing images. Each technique may be useful for a small range of tasks, however there still aren't any known methods of image analysis that are generic enough for wide ranges of tasks, compared to the abilities of a human's image analysing capabilities. Examples of image analysis techniques in different fields include: 2D and 3D object recognition, image segmentation, motion detection e.g. Single particle tracking, video tracking, optical flow, medical scan analysis, 3D Pose Estimation. == Deep learning == Since the early 2010s, deep learning methods have substantially advanced the field of image analysis. In 2012, a deep convolutional neural network (CNN) known as AlexNet achieved a significant reduction in error rates on the ImageNet large-scale image classification benchmark, demonstrating the effectiveness of deep learning for visual recognition tasks. Subsequent architectures such as ResNet introduced residual connections that enabled training of much deeper networks, further improving accuracy across image analysis tasks. Real-time object detection became practical with frameworks such as YOLO (You Only Look Once), which unified detection and classification into a single network pass. In 2020, the Vision Transformer (ViT) demonstrated that transformer architectures, originally developed for natural language processing, could achieve competitive results on image classification when applied directly to sequences of image patches. More recently, foundation models trained on large-scale datasets have enabled zero-shot generalisation across image analysis tasks. The Segment Anything Model (SAM), trained on over one billion masks, can segment arbitrary objects in images without task-specific fine-tuning. These advances have made image analysis techniques increasingly accessible through browser-based tools and open-source implementations. == Applications == The applications of digital image analysis are continuously expanding through all areas of science and industry, including: anatomy, allows for precise measurements, visualization, and statistical analysis of anatomical structures. assay micro plate reading, such as detecting where a chemical was manufactured. astronomy, such as calculating the size of a planet. automated species identification (e.g. plant and animal species) defense error level analysis filtering machine vision, such as to automatically count items in a factory conveyor belt. materials science, such as determining if a metal weld has cracks. medicine, such as detecting cancer in a mammography scan. metallography, such as determining the mineral content of a rock sample. microscopy, such as counting the germs in a swab. automatic number plate recognition; optical character recognition, such as automatic license plate detection. remote sensing, such as detecting intruders in a house, and producing land cover/land use maps. robotics, such as to avoid steering into an obstacle. security, such as detecting a person's eye color or hair color. == Object-based == Object-based image analysis (OBIA) involves two typical processes, segmentation and classification. Segmentation helps to group pixels into homogeneous objects. The objects typically correspond to individual features of interest, although over-segmentation or under-segmentation is very likely. Classification then can be performed at object levels, using various statistics of the objects as features in the classifier. Statistics can include geometry, context and texture of image objects. Over-segmentation is often preferred over under-segmentation when classifying high-resolution images. Object-based image analysis has been applied in many fields, such as cell biology, medicine, earth sciences, and remote sensing. For example, it can detect changes of cellular shapes in the process of cell differentiation.; it has also been widely used in the mapping community to generate land cover. When applied to earth images, OBIA is known as geographic object-based image analysis (GEOBIA), defined as "a sub-discipline of geoinformation science devoted to (...) partitioning remote sensing (RS) imagery into meaningful image-objects, and assessing their characteristics through spatial, spectral and temporal scale". The international GEOBIA conference has been held biannually since 2006. OBIA techniques are implemented in software such as eCognition or the Orfeo toolbox.

    Read more →
  • Airfair

    Airfair

    AirFair was a mobile travel application that checks flights, and shows whether a traveler is owed compensation. == History == AirFair was developed in 2016 by Allay Logic Ltd; a Newcastle-based tech-company. == Services == AirFair offered a free flight check to see if compensation is owed. The app could indicate how much the person is owed within minutes whether the flight was delayed, cancelled or the traveler is refused boarding.

    Read more →
  • Stixel

    Stixel

    In computer vision, a stixel (portmanteau of "stick" and "pixel") is a superpixel representation of depth information in an image, in the form of a vertical stick that approximates the closest obstacles within a certain vertical slice of the scene. Introduced in 2009, stixels have applications in robotic navigation and advanced driver-assistance systems, where they can be used to define a representation of robotic environments and traffic scenes with a medium level of abstraction. == Definition == One of the problems of scene understanding in computer vision is to determine horizontal freespace around the camera, where the agent can move, and the vertical obstacles delimiting it. An image can be paired with depth information (produced e.g. from stereo disparity, lidar, or monocular depth estimation), allowing a dense tridimensional reconstruction of the observed scene. One drawback of dense reconstruction is the large amount of data involved, since each pixel in the image is mapped to an element of a point cloud. Vision problems characterised by planar freespace delimited by mostly vertical obstacles, such as traffic scenes or robotic navigation, can benefit from a condensed representation that allows to save memory and processing time. Stixels are thin vertical rectangles representing a slice of a vertical surface belonging to the closest obstacle in the observed scene. They allow to dramatically reduce the amount of information needed to represent a scene in such problems. A stixel is characterised by three parameters: vertical coordinate of the bottom, height of the stick, and depth. Stixels have fixed width, with each stixel spanning over a certain number of image columns, allowing downsampling of the horizontal image resolution. In the original formulation, each column of the image would contain at most one stixel, and later extensions were developed to allow multiple stixels on each column, allowing to represent multiple objects at different distances. == Stixel estimation == The input to stixel estimation is a dense depth map, that can be computed from stereo disparity or other means. The original approach computes an occupancy grid that can be segmented to estimate the freespace, with dynamic programming providing an efficient method to find an optimal segmentation. Alternative approaches can be used instead of occupancy grid mapping, such as manifold-based methods. The freespace boundary provides the base points of the obstacles at closest longitudinal distance, however multiple objects at different distances might appear in each column of the image. To fully define the obstacles, their height should be estimated, and this is accomplished by segmenting the depth of the object from the depth of the background. A membership function over the pixels can be defined based on the depth value, where the membership represents the confidence of a pixel belonging to the closest vertical obstacle or to the background, and a cut separating the obstacles from the background can again be computed effectively with dynamic programming. Once both the freespace and the obstacle height are known, the stixels can be estimated by fusing the information over the columns spanned by each stixel, and finally a refined depth of the stixel can be estimated via model fitting over the depth of the pixels covered by the stixel, possibly paired with confidence information (e.g. disparity confidence produced by methods such as semi-global matching).

    Read more →
  • Keith Youngin George II

    Keith Youngin George II

    Keith "Youngin" George II is a former mixtape DJ, music executive, manager, producer, and technology app director. He has collaborated with Maino, T-Pain, Nas and Soulja Boy, among others. He was instrumental in the launch of social media app and website, Kandiid in 2021 and served as Fliiks App Director of Regional Development. == Career == Keith Anthony George II was born in Upper Heyford, Oxfordshire, England. His father was in the Air Force which exposed him to different cultures and music. He graduated from Allen High School and attended San Antonio College. George's music career began in 2006 as a mixtape DJ working as DJ Youngin Beatz. He performed at various shows and worked with a variety of artists, managers, and music executives. In 2007, George released the mixtape, Untapped market Vol. 1 (Da Underdogz), which featured tracks from artists including Kanye West, Lil Wayne, 50 Cent, Yung Berg, and Nelly. In 2008, he began working with Def Jam executive Sarah Alminawi who was managing Maino at the time. George played a key role in the marketing and promotional success of Maino's single, Hi Hater, which peaked at #8 on Billboard's US Bubbling Under Hot 100 chart. In 2021, George was an advisor and infrastructure head at Kandiid, a social media app which won a W3 Award in 2022. In 2023, he became involved with Fliiks App as Director of Regional Development which earned a Telly Award, two Muse Awards, and a W3 Award in 2025. In 2025, George was a composer and producer on two singles on Sekou Andrews's album, Koumami; The Chosen One: ACT 1 (featuring Lion Babe) and Love Don't Care (featuring Jordin Sparks and Omari Hardwick). In 2025, he was awarded an Atlanta City Proclamation for Philanthropy and Community Leadership for his partnership with Women's International Grail, a nonprofit organization that assists women, single mothers, and low-income families. He also collaborates with local youth programs, creative networks, and minority-owned startups, providing access to mentorship and industry knowledge. == Awards ==

    Read more →
  • Contextual image classification

    Contextual image classification

    Contextual image classification, a topic of pattern recognition in computer vision, is an approach of classification based on contextual information in images. "Contextual" means this approach is focusing on the relationship of the nearby pixels, which is also called neighbourhood. The goal of this approach is to classify the images by using the contextual information. == Introduction == Similar as processing language, a single word may have multiple meanings unless the context is provided, and the patterns within the sentences are the only informative segments we care about. For images, the principle is same. Find out the patterns and associate proper meanings to them. As the image illustrated below, if only a small portion of the image is shown, it is very difficult to tell what the image is about. Even try another portion of the image, it is still difficult to classify the image. However, if we increase the contextual of the image, then it makes more sense to recognize. As the full images shows below, almost everyone can classify it easily. During the procedure of segmentation, the methods which do not use the contextual information are sensitive to noise and variations, thus the result of segmentation will contain a great deal of misclassified regions, and often these regions are small (e.g., one pixel). Compared to other techniques, this approach is robust to noise and substantial variations for it takes the continuity of the segments into account. Several methods of this approach will be described below. == Applications == === Functioning as a post-processing filter to a labelled image === This approach is very effective against small regions caused by noise. And these small regions are usually formed by few pixels or one pixel. The most probable label is assigned to these regions. However, there is a drawback of this method. The small regions also can be formed by correct regions rather than noise, and in this case the method is actually making the classification worse. This approach is widely used in remote sensing applications. === Improving the post-processing classification === This is a two-stage classification process: For each pixel, label the pixel and form a new feature vector for it. Use the new feature vector and combine the contextual information to assign the final label to the === Merging the pixels in earlier stages === Instead of using single pixels, the neighbour pixels can be merged into homogeneous regions benefiting from contextual information. And provide these regions to classifier. === Acquiring pixel feature from neighbourhood === The original spectral data can be enriched by adding the contextual information carried by the neighbour pixels, or even replaced in some occasions. This kind of pre-processing methods are widely used in textured image recognition. The typical approaches include mean values, variances, texture description, etc. === Combining spectral and spatial information === The classifier uses the grey level and pixel neighbourhood (contextual information) to assign labels to pixels. In such case the information is a combination of spectral and spatial information. === Powered by the Bayes minimum error classifier === Contextual classification of image data is based on the Bayes minimum error classifier (also known as a naive Bayes classifier). Present the pixel: A pixel is denoted as x 0 {\displaystyle x_{0}} . The neighbourhood of each pixel x 0 {\displaystyle x_{0}} is a vector and denoted as N ( x 0 ) {\displaystyle N(x_{0})} . The values in the neighbourhood vector is denoted as f ( x i ) {\displaystyle f(x_{i})} . Each pixel is presented by the vector ξ = ( f ( x 0 ) , f ( x 1 ) , … , f ( x k ) ) {\displaystyle \xi =\left(f(x_{0}),f(x_{1}),\ldots ,f(x_{k})\right)} x i ∈ N ( x 0 ) ; i = 1 , … , k {\displaystyle x_{i}\in N(x_{0});\quad i=1,\ldots ,k} The labels (classification) of pixels in the neighbourhood N ( x 0 ) {\displaystyle N(x_{0})} are presented as a vector η = ( θ 0 , θ 1 , … , θ k ) {\displaystyle \eta =\left(\theta _{0},\theta _{1},\ldots ,\theta _{k}\right)} θ i ∈ { ω 0 , ω 1 , … , ω k } {\displaystyle \theta _{i}\in \left\{\omega _{0},\omega _{1},\ldots ,\omega _{k}\right\}} ω s {\displaystyle \omega _{s}} here denotes the assigned class. A vector presents the labels in the neighbourhood N ( x 0 ) {\displaystyle N(x_{0})} without the pixel x 0 {\displaystyle x_{0}} η ^ = ( θ 1 , θ 2 , … , θ k ) {\displaystyle {\hat {\eta }}=\left(\theta _{1},\theta _{2},\ldots ,\theta _{k}\right)} The neighbourhood: Size of the neighbourhood. There is no limitation of the size, but it is considered to be relatively small for each pixel x 0 {\displaystyle x_{0}} . A reasonable size of neighbourhood would be 3 × 3 {\displaystyle 3\times 3} of 4-connectivity or 8-connectivity ( x 0 {\displaystyle x_{0}} is marked as red and placed in the centre). The calculation: Apply the minimum error classification on a pixel x 0 {\displaystyle x_{0}} , if the probability of a class ω r {\displaystyle \omega _{r}} being presenting the pixel x 0 {\displaystyle x_{0}} is the highest among all, then assign ω r {\displaystyle \omega _{r}} as its class. θ 0 = ω r if P ( ω r ∣ f ( x 0 ) ) = max s = 1 , 2 , … , R P ( ω s ∣ f ( x 0 ) ) {\displaystyle \theta _{0}=\omega _{r}\quad {\text{ if }}\quad P(\omega _{r}\mid f(x_{0}))=\max _{s=1,2,\ldots ,R}P(\omega _{s}\mid f(x_{0}))} The contextual classification rule is described as below, it uses the feature vector x 1 {\displaystyle x_{1}} rather than x 0 {\displaystyle x_{0}} . θ 0 = ω r if P ( ω r ∣ ξ ) = max s = 1 , 2 , … , R P ( ω s ∣ ξ ) {\displaystyle \theta _{0}=\omega _{r}\quad {\text{ if }}\quad P(\omega _{r}\mid \xi )=\max _{s=1,2,\ldots ,R}P(\omega _{s}\mid \xi )} Use the Bayes formula to calculate the posteriori probability P ( ω s ∣ ξ ) {\displaystyle P(\omega _{s}\mid \xi )} P ( ω s ∣ ξ ) = p ( ξ ∣ ω s ) P ( ω s ) p ( ξ ) {\displaystyle P(\omega _{s}\mid \xi )={\frac {p(\xi \mid \omega _{s})P(\omega _{s})}{p\left(\xi \right)}}} The number of vectors is the same as the number of pixels in the image. For the classifier uses a vector corresponding to each pixel x i {\displaystyle x_{i}} , and the vector is generated from the pixel's neighbourhood. The basic steps of contextual image classification: Calculate the feature vector ξ {\displaystyle \xi } for each pixel. Calculate the parameters of probability distribution p ( ξ ∣ ω s ) {\displaystyle p(\xi \mid \omega _{s})} and P ( ω s ) {\displaystyle P(\omega _{s})} Calculate the posterior probabilities P ( ω r ∣ ξ ) {\displaystyle P(\omega _{r}\mid \xi )} and all labels θ 0 {\displaystyle \theta _{0}} . Get the image classification result. == Algorithms == === Template matching === The template matching is a "brute force" implementation of this approach. The concept is first create a set of templates, and then look for small parts in the image match with a template. This method is computationally high and inefficient. It keeps an entire templates list during the whole process and the number of combinations is extremely high. For a m × n {\displaystyle m\times n} pixel image, there could be a maximum of 2 m × n {\displaystyle 2^{m\times n}} combinations, which leads to high computation. This method is a top down method and often called table look-up or dictionary look-up. === Lower-order Markov chain === The Markov chain also can be applied in pattern recognition. The pixels in an image can be recognised as a set of random variables, then use the lower order Markov chain to find the relationship among the pixels. The image is treated as a virtual line, and the method uses conditional probability. === Hilbert space-filling curves === The Hilbert curve runs in a unique pattern through the whole image, it traverses every pixel without visiting any of them twice and keeps a continuous curve. It is fast and efficient. === Markov meshes === The lower-order Markov chain and Hilbert space-filling curves mentioned above are treating the image as a line structure. The Markov meshes however will take the two dimensional information into account. === Dependency tree === The dependency tree is a method using tree dependency to approximate probability distributions.

    Read more →