AI Code Tester

AI Code Tester — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

• 

  Pattern playback

  The pattern playback is an early talking device that was built by Dr. Franklin S. Cooper and his colleagues, including John M. Borst and Caryl Haskins, at Haskins Laboratories in the late 1940s and completed in 1950. There were several different versions of this hardware device. Only one currently survives. The machine converts pictures of the acoustic patterns of speech in the form of a spectrogram back into sound. Using this device, Alvin Liberman, Frank Cooper, and Pierre Delattre (later joined by Katherine Safford Harris, Leigh Lisker, and others) were able to discover acoustic cues for the perception of phonetic segments (consonants and vowels). This research was fundamental to the development of modern techniques of speech synthesis, reading machines for the blind, the study of speech perception and speech recognition, and the development of the motor theory of speech perception. To create sound, the pattern playback machine uses an arc light source which is directed against a rotating disk with 50 concentric tracks whose transparencies vary systematically in order to produce 50 harmonics of a fundamental frequency. The light is further projected against a spectrogram, whose reflectance corresponds to the sound pressure level of the partial of the signal, and is then directed towards a photovoltaic cell by which the light variation is converted into sound pressure variations. The pattern playback was last used in an experimental study by Robert Remez in 1976. The pattern playback now resides in the Museum at Haskins Laboratories in New Haven, Connecticut. The technique of pattern playback also now refers, more generally, to algorithms or techniques for converting spectrograms, cochleagrams, and correlograms from pictures back into sounds. A demonstration is in the TV show Adventure. Pioneering technology in psycholinguistics (CBS Television. 1953). == Digital pattern playback == In the 1970s, digital pattern playbacks began to supplant the earlier version. An early prototype was developed by Patrick Nye, Philip Rubin, and colleagues at Haskins Laboratories. It combined a "Ubiquitous Spectrum Analyzer"[1] for automatic spectral analysis, along with a VAX GT-40 display processor for graphic manipulation of the displayed spectrogram, a form of "synthesis by art", and subsequent re-synthesis using a 40 channel filter bank. This hybrid hardware/software digital pattern playback was eventually replaced at Haskins Laboratories by the HADES analysis and display system, designed by Philip Rubin, and implemented in Fortran on the VAX family of computers. A more modern version has been described by Arai and colleagues [2]. An on-line demonstration is available [3].

  Read more →
• 

  Digital zombie

  A digital zombie is a person so engaged with digital technology or social media they are unable to separate themselves from a persistent online presence. Writing in 2017, University of Sydney researcher Andrew Campbell expressed concerns over whether or not the individual can truly live a full and healthy life while they are preoccupied with the digital world. Other individuals have also begun referencing certain types of behaviour with being a digital zombie. Stefanie Valentic, managing editor of EHS Today, refers to it as people hunting digital creatures through their smartphones in public spaces, always fixed on their phones. The University of Warwick has used the term to argue that further research needs to be done with people who exist in digital form after death to help people grieve their loss. == Modern applications == === Distracted walking === The term digital zombie can refer to a person performing distracted walking, which has been labelled dangerous by the American Academy of Orthopaedic Surgeons. They created the "Digital Deadwalkers" campaign after physicians became aware of the risks associated with walking across intersections and sidewalks while paying attention only to smartphones and not one's surroundings. Also stating that the name is derived from the fact that "they're oblivious to everyone else, so it's like they're dead-walking, sleepwalking." === Living through media === The Department of Sociology, University of Warwick has also identified the term, digital zombie, to refer to an individual who has died but is digitally resurrected, reanimated and socially active. These digital zombies do things in death they did not do when they were alive as they "live" again through a digital self on a digital medium. Dead celebrities sometimes become digital zombies when they are reanimated to appear in commercial advertisements (such as Audrey Hepburn and Bob Monkhouse). Other accidental digital zombies include Tupac Shakur and Michael Jackson who were both digitally resurrected and recreated to perform "live" on stage years after their death. Researchers at the University of Warwick have carried out research into the area of human-computer interaction. in an effort to understand the affect these digital zombies have on grief and bereavement. === Mobile gaming === Writer for EHS Today, Stefanie Valentic, has made observations with the mobile phone video game Pokémon Go, which offers players the experience to hunt and collect digital creatures called Pokémon through their smartphone in real world. Players can be observed simultaneously gazing at their phone while also obliviously walking around their environments looking for Pokémon. Stefanie references these individuals as "digital zombies" since they walk around with no cognition of their surroundings while engaged with their phone. == Health risks == === Heavy use of technology === Research by the University of Sydney has begun looking at how new technology such as digital media and smartphones impact our lives and questioning whether they can create new compulsions and obsessions. The research demonstrates that increased heavy technological use can have negative health consequences similar to drugs, smoking, and alcohol. Marcel O'Gorman, an associate professor of English at the University of Waterloo, has commented on the body of research examining how technology impacts cognition, stating currently that there is no empirical evidence to support any theories that suggest that technology can damage memory and attention span. === Heightened risk to children === Manfred Spitzer, a German psychiatrist, has raised concerns with providing digital devices to children. During the early childhood stage while their brains are rapidly growing, increased exposure to digital devices may deprive them of necessary development required to facilitate brain growth. These concerns are also shared by Korean doctors who believe giving digital devices, like smartphones to children, limits their cognitive development.

  Read more →
• 

  History of operating systems

  Computer operating systems (OSes) provide a set of functions needed and used by most application programs on a computer, and the links needed to control and synchronize computer hardware. On the first computers, with no operating system, every program needed the full hardware specification to run correctly and perform standard tasks, and its own drivers for peripheral devices like printers and punched paper card readers. The growing complexity of hardware and application programs eventually made operating systems a necessity for everyday use. == Background == Early computers lacked any form of operating system. Instead, the user (rarely also the computer operator), had sole use of the machine for a scheduled period of time. The user would deliver his program to a computer operator who would be responsible for loading the computer with the program and data needed for its 'run'. Eventually, the end of a user's program could be detected and a control program automatically loaded which would load the next user's program, relieving the operator of having to load in each user's program individually and introducing the era of 'batched' programming. That is, a number of user programs could all be loaded together in a batch. Loading of program and data was accomplished in various ways including toggle switches (only used by a user on the earliest of computers, but later used by the computer operator to control the computer, e.g., to start it up, to shut it down, to 'pause', to 'dump' its RAM contents, and/or to control its input and/or its output), punched paper cards and magnetic or paper tape. Once loaded, the machine would be set to execute each program singly until that program completed, crashed, exceeded its time limit or went into a(n infinite) loop. In those early days, there were only 'Control Program' units for providing the software necessary to control the computers and ancillary hardware, e.g., for such semi hardware functions as I/O . None of the early 'Control Programs' were sufficiently sophisticated to recognize a looping user program or initiate a recovery action. Detection and recovery from a looping program was another critical operator function and was usually detected by the sound of the looping computer, whereupon the operator would simply initiate a complete dump of the executing program (for later debugging by the programmer) and then load in (or instruct the computer to go on to) the next user's program. Programs could sometimes be debugged via a control panel using dials, toggle switches and panel lights, making it a very manual and error-prone process. But, this was quite rare, since the high cost of even the simplest of the early computers prohibited such exclusive use of a computer by an individual programmer. Almost all program debugging was done away from any computer by the original programmer perusing the program and the dump of its execution obtained, e.g., by the computer operator or automatically by some computer hardware exception detection (such as a timeout, an attempt to divide by zero, or an over or underflow). Programmers then could only very rarely have more than one computer 'run' per day! Symbolic languages, e.g., assemblers and compilers were developed for programmers to translate symbolic program code into machine code that previously would have been hand-encoded. Later machines came with libraries of support code on punched cards or magnetic tape, which would be linked to the user's program to assist in operations such as input and output. This was the genesis of the modern-day operating system; however, machines still ran a single program or job at a time. At Cambridge University in England the job queue was at one time a string from which tapes attached to corresponding job tickets were hung with stationery pegs. == Mainframes == The first operating system used for real work was GM-NAA I/O, produced in 1956 by General Motors' Research division for its IBM 704. Most other early operating systems for IBM mainframes were also produced by customers. Early operating systems were very diverse, with each vendor or customer producing one or more operating systems specific to their particular mainframe computer. Every operating system, even from the same vendor, could have radically different models of commands, operating procedures, and such facilities as debugging aids. Typically, each time the manufacturer brought out a new machine, there would be a new operating system, and most applications would have to be manually adjusted, recompiled, and retested. === Systems on IBM hardware === Building on customer experience and requirements, IBM took on a more active role in developing operating systems for the 709, 1410, 7010, 7040, 7044, 7090 and 7094. IBM also collaborated with universities. The state of affairs continued until the mid 1960s when IBM, already a leading hardware vendor, stopped work on existing systems and put all its effort into developing the System/360 series of machines, all of which used the same instruction and input/output architecture. IBM intended to develop a single operating system for the new hardware, the OS/360. The problems encountered in the development of the OS/360 are legendary, and are described by Fred Brooks in The Mythical Man-Month—a book that has become a classic of software engineering. Because of performance differences across the hardware range and delays with software development, a whole family of operating systems was introduced instead of a single OS/360. IBM wound up releasing a series of stop-gaps followed by two longer-lived operating systems: OS/360 for mid-range and large systems. This was available in three system generation options: PCP for early users and for those without the resources for multiprogramming. MFT for mid-range systems, replaced by MFT-II in OS/360 Release 15/16. This had one successor, OS/VS1, which was discontinued in the 1980s. MVT for large systems. This was similar in most ways to PCP and MFT (most programs could be ported among the three without being re-compiled), but has more sophisticated memory management and a time-sharing facility, TSO. MVT had several successors including the current z/OS. DOS/360 for small System/360 models had several successors including the current z/VSE. It was significantly different from OS/360. IBM maintained full compatibility with the past, so that programs developed in the sixties can still run under z/VSE (if developed for DOS/360) or z/OS (if developed for MFT or MVT) with no change. IBM also developed TSS/360, a time-sharing system for the System/360 Model 67. Overcompensating for their perceived importance of developing a timeshare system, they set hundreds of developers to work on the project. Early releases of TSS were slow and unreliable; by the time TSS had acceptable performance and reliability, IBM wanted its TSS users to migrate to OS/360 and OS/VS2; while IBM offered a TSS/370 PRPQ, they dropped it after 3 releases. Several operating systems for the IBM S/360 and S/370 architectures were developed by third parties, including the Michigan Terminal System (MTS) and MUSIC/SP. === Other mainframe operating systems === Control Data Corporation developed the SCOPE operating systems in the 1960s, for batch processing and later developed the MACE operating system for time sharing, which was the basis for the later Kronos. In cooperation with the University of Minnesota, the Kronos and later the NOS operating systems were developed during the 1970s, which supported simultaneous batch and time sharing use. Like many commercial time sharing systems, its interface was an extension of the DTSS time sharing system, one of the pioneering efforts in timesharing and programming languages. In the late 1970s, Control Data and the University of Illinois developed the PLATO system, which used plasma panel displays and long-distance time sharing networks. PLATO was remarkably innovative for its time; the shared memory model of PLATO's TUTOR programming language allowed applications such as real-time chat and multi-user graphical games. For the UNIVAC 1107, UNIVAC, the first commercial computer manufacturer, produced the EXEC I operating system, and Computer Sciences Corporation developed the EXEC II operating system and delivered it to UNIVAC. EXEC II was ported to the UNIVAC 1108. Later, UNIVAC developed the EXEC 8 operating system for the 1108; it was the basis for operating systems for later members of the family. Like all early mainframe systems, EXEC I and EXEC II were a batch-oriented system that managed magnetic drums, disks, card readers and line printers; EXEC 8 supported both batch processing and on-line transaction processing. In the 1970s, UNIVAC produced the Real-Time Basic (RTB) system to support large-scale time sharing, also patterned after the Dartmouth BASIC system. Burroughs Corporation introduced the B5000 in 1961 with the MCP (Master Control Program) operating system. The B5000

  Read more →
• 

  News ticker

  A news ticker (sometimes called a crawler, crawl, slide, zipper, ticker tape, or chyron) is a horizontal or vertical (depending on the language's writing system) text-based display either in the form of a graphic that typically resides in the lower third of the screen space on a television station or network (usually during news programming) or as a long, thin scoreboard-style display seen around the facades of some offices or public buildings dedicated to presenting headlines or minor pieces of news. It is an evolution of the paper strips tapes, a continuous paper print-out of stock quotes from a printing telegraph which was mainly used to transmit companies' share price information over telegraph lines before the advance of technology in the 1960s. News tickers have been used in Europe in countries such as United Kingdom, Germany and Ireland for some years; they are also used in several Asian countries and Australia. In the United States, tickers were long used on a special event basis by broadcast television stations to disseminate weather warnings, school closings, and election results. Sports telecasts occasionally used a ticker to update other contests in progress before the expansion of cable news networks and the internet for news content. In addition, some ticker displays are used to relay continuous business and financial information. Most tickers are traditionally displayed in the form of scrolling text running from right to left across the screen or building display (or in the opposite direction for right-to-left writing systems such as Arabic script and Hebrew), allowing for headlines of varying degrees of detail; some used by television broadcasters, however, display stories in a static manner (allowing for the seamless switching of each story individually programmed for display) or utilize a "flipping" effect (in which each individual headline is shown for a few seconds before transitioning to the next, instead of scrolling across the screen, usually resulting in a relatively quicker run through of all of the information programmed into the ticker). Since the growth in usage of the World Wide Web, some news tickers have syndicated news stories posted largely on websites of broadcasters or by other independent news agencies. == Current uses == === Television === The presentation of headlines or other information in a news ticker has become a common element of many different news networks. The use of the ticker has differed on a number of channels: News networks and local newscasts commonly use a setup in which news headlines are scrolled across an area near the bottom of the screen, though some variations have formed, such as showing one headline at a time with a scrolling or "flipper" effect. Financial news channels use two or more tickers displaying company shares prices and business headlines. Networks with a focus on sports often use a slightly different system, where scores and statuses of ongoing and finished games are displayed one by one, along with minor sports highlights, statistics and sports news headlines. They are typically divided into categories devoted to specific leagues and events (with college basketball and football usually focusing on the top 25 ranked teams on the AP Poll, occasionally supplemented by sections for specific conferences). Some programs, including news-based programs emphasizing viewer interactivity, or special events, may also use tickers to display messages and reactions from viewers and others that relate to the program. These comments are often sourced from social networking services such as Facebook and Twitter, typically curating comments from a specific page or hashtag. Due to their current prevalence, they have been occasionally been made targets of pranks and vandalism. In one such example, News 14 Carolina allowed viewers to submit relevant information such as school closings or traffic delays via telephone or the Internet that would be incorporated into the ticker; the system was exploited in February 2004 to display humorous and crude messages, including the infamous "All your base are belong to us". Occasionally messages intended for training accidentally end up being put on the live ticker as happened on BBC News in 2022 when "Weather rain everywhere" and "Manchester United are rubbish" appeared on the live news ticker. Some businesses and organizations have utilized tickers intended for relaying weather-related closings as a surreptitious source for free guerrilla marketing, proclaiming they were open rather than closed and giving their phone number if possible, allowing them to 'advertise' on a television station all day for free. Since then, many stations have required pre-registration of businesses or organizations with an authorized representative and a signed affidavit on company letterhead affirming their authenticity, along with filtering out unfamiliar businesses and organizations, before being able to display their closing announcements. Stations also confirm all closings involving school districts with authorized officials to prevent situations in which students either show up to canceled classes in dangerous conditions, or do not attend school due to an erroneous, prank-submitted, or false listing. === On personal computers === Various applications have been developed over time to install news tickers on personal computer desktops using RSS feeds from news organizations, which are displayed in a fashion similar to those used by television channels but enable the user to access to underlying news stories, a feature not offered by traditional television channels. The Bloomberg Terminal and other financial information-tracking programs and devices also utilize tickers. A ticker may also be used as an unobtrusive method by businesses in order to deliver important information to their staff. The ticker can be set to reappear, stay on screen, or be put into a retractable mode (where a small tab is left visible on-screen). In the United Kingdom, broadcasters have stopped using this technology as other forms of communications have become available and increased in popularity. BBC News and Sky News discontinued their respective desktop tickers in March 2011 and 2012 to focus on other products, such as smartphone applications, to deliver updated information on breaking news and sport stories. === News tickers on buildings === Since the advent of the telegraph, newspapers commonly used their buildings to share the latest headlines. At first simple chalkboard signs were used for bulletins, but limelight illumination, electric lights, magic lantern projections, and other novel techniques were later employed. The method of using electric lights to spell out moving letters was invented by Frank C. Reilly (August 20, 1888 – April 10, 1947) and patented in 1923. Reilly called his invention the Motograph News Bulletin. In 1928, The New York Times installed a Motograph News Bulletin to display news headlines on the sides of Times Tower. The display was 388 feet (118 m) long, 5 feet (1.5 m) high, and employed over 14,800 light bulbs. Popularly known as the "Zipper", the sign remained in use until the building was sold in 1961. The sign was darkened during World War II to comply with wartime lighting restrictions. The Motograph operated until 1994 and was replaced by an electronic version in 1995, which was in turn removed in 2017 due to the replacement of all individual screens on the front of One Times Square with a 350 foot (110 m)-tall LED billboard in 2018. Ticker displays appear today on the exterior of the News Corp Building, which houses the headquarters for Fox News Channel/News Corp in the west extension of Manhattan's Rockefeller Center, as well as one that displays delayed stock market data that is located in Times Square. NASDAQ itself features a large display screen on the facade of the NASDAQ MarketSite building in Times Square. The Reuters buildings at Canary Wharf and in Toronto have news and stock tickers; the latter type features market data for the New York Stock Exchange, NASDAQ and London Stock Exchange, while the Toronto building's ticker also includes quotes from the Toronto Stock Exchange. A red-LED ticker was added to the perimeter of 10 Rockefeller Center in 1994, as the building was being renovated to accommodate the studios for NBC's Today. Placed at the juncture of the first and second floors, the ticker is visible to spectators in Rockefeller Plaza and passersby on West 49th Street and updates continuously, even at times when Today is not being produced and broadcast. As of 2015, the ticker strip is only a small part of a large two-floor LCD video display that is placed within the window of the studio showing promotional information. The Martin Place Headquarters of Seven News, the news division of Australian television broadcaster Seven Network, also incorporates a ticker that wraps around the building. == In popular culture == The use of new

  Read more →
• 

  Easyrec

  easyrec is an open-source program that provides personalized recommendations using RESTful Web services to be integrated into Web enabled applications. It is distributed under the GNU General Public License by the Studio Smart Agent Technologies and hosted at SourceForge. It is written in Java, uses a MySQL database and comes with an administration tool. == History == The development of easyrec, an implementation of the Adaptive Personalization approach, started in the course of several research and development projects conducted by the Studio Smart Agent Technologies in close cooperation with international companies. During the year of 2008 the core functionality of easyrec was developed forming the basis of research prototypes focusing on the music domain (e.g. MusicExplorer). In June 2009 a beta version of easyrec, containing basic administration features, was integrated into a movie streaming portal for evaluation purposes. Furthermore, in September 2009 easyrec was awarded a special recognition in the category “Award for Innovations – IT Innovations for an economic upswing” by the jury of the Austrian state prize for multimedia and e-business. After a comprehensive refactoring phase and the integration of the evaluation results easyrec was published on SourceForge on 18 February 2010. In course of the CeBIT tradeshow 2011 in Hanover easyrec has been awarded the German “INNOVATIONSPREIS-IT 2011”. == Principles == The following five primary goals guided the development of easyrec. It should be a ready-to-use application, not another algorithmic framework It should be easy to use, concerning installation, integration and administration It should be robust and scalable for serving real world applications It should be free of charge, so that anyone can profit from personalization features It should rely on a community-driven development == Uses == Although easyrec is a domain-agnostic, general purpose personalization system, the current Web service API is customized for providing online shops with item recommendations. Especially for small and medium enterprises, easyrec provides a low barrier entrance to personalization. == Features == A major feature of easyrec is a set of usage statistics and other business relevant information presented via an administration and management interface. Furthermore, the easyrec administrator is supported by a variety of administration and configuration functions including the manual import or adaptation of business rules. Integrators or developers benefit from the lightweight Web service APIs (REST and SOAP) as well as from the guided installation wizard. Concerning personalization functionality easyrec is providing the following services unpersonalized recommendations of the form "other users also bought/viewed/...", etc. personalized recommendation depending on individual preferences rankings such as "most bought items", "most viewed...", etc. Additionally, as an integration showcase, a MediaWiki extension was developed and is bundled with the application. Currently additional features like further recommender algorithms and a plugin-system are evaluated and prepared for integration into the easyrec system. == Architecture == The underlying architecture of easyrec is designed to be robust and scalable—separating time-consuming computations from the task of online assembling of recommendations. easyrec is designed as a multi-layer system consisting of a database layer as storage of user actions and pre-calculated business rules an application layer for hosting online and offline recommendation services and an API layer for various Web service interfaces. Moreover, the generator server contains different item association generators which create business rules that define a relation between two items.

  Read more →
• 

  TheFWA

  FWA (Favourite Website Awards) is an international award platform that honors and rewards web designers, developers and agencies around the world for excellence within the field of web design and development. The FWA was founded in May 2000 by Rob Ford. In November 2012, The FWA was the most visited website award program in the history of the internet, with over 170 millions site visits. == Jury == The FWA jury is composed of more than 500 web professionals (200 women + 200 men) from 35 countries. == Awards granted == FWA of the Day (FOTD) : Every day, the FWA jury selects the best project, FWA of the Month (FOTM): Every month, the FWA jury selects the best project, People's Choice Award (PCA) : Every year, a public vote selects the people's favourite project, FWA of the Year (FOTY) : Every year, the FWA jury selects the best project. == Hall Of Fame == The FWA Hall of Fame was established in May 2007 (to celebrate the seventh anniversary of the FWA), as a recognition of web's greatest individuals and companies.

  Read more →
• 

  Interference (communication)

  In telecommunications, an interference is that which modifies a signal in a disruptive manner, as it travels along a communication channel between its source and receiver. The term is often used to refer to the addition of unwanted signals to a useful signal. Common examples include: Electromagnetic interference (EMI) Co-channel interference (CCI), also known as crosstalk Adjacent-channel interference (ACI) Intersymbol interference (ISI) Inter-carrier interference (ICI), caused by doppler shift in OFDM modulation (multitone modulation). Common-mode interference (CMI) Conducted interference Noise is a form of interference but not all interference is noise. Radio resource management aims at reducing and controlling the co-channel and adjacent-channel interference. == Interference alignment == A solution to interference problems in wireless communication networks is interference alignment, which was crystallized by Syed Ali Jafar at the University of California, Irvine. A specialized application was previously studied by Yitzhak Birk and Tomer Kol for an index coding problem in 1998. For interference management in wireless communication, interference alignment was originally introduced by Mohammad Ali Maddah-Ali, Abolfazl S. Motahari, and Amir Keyvan Khandani, at the University of Waterloo, for communication over wireless X channels. Interference alignment was eventually established as a general principle by Jafar and Viveck R. Cadambe in 2008, when they introduced "a mechanism to align an arbitrarily large number of interferers, leading to the surprising conclusion that wireless networks are not essentially interference limited." This led to the adoption of interference alignment in the design of wireless networks. Jafar explained: My research group crystallized the concept of interference alignment and showed that through interference alignment, it is possible for everyone to access half of the total bandwidth free from interference. Initially this result was shown under a number of idealized assumptions that are typical in theoretical studies. We have since continued to work on peeling off these idealizations one at a time, to bring the theory closer to practice. Along the way we have made numerous discoveries through the lens of interference alignment, which reveal new and powerful signaling schemes. According to New York University senior researcher Paul Horn: Syed Jafar revolutionized our understanding of the capacity limits of wireless networks. He demonstrated the astounding result that each user in a wireless network can access half of the spectrum without interference from other users, regardless of how many users are sharing the spectrum. This is a truly remarkable result that has a tremendous impact on both information theory and the design of wireless networks.

  Read more →
• 

  Hardware backdoor

  A hardware backdoor is a backdoor implemented within the physical components of a computer system, also known as its hardware. They can be created by introducing malicious code to a component's firmware, or even during the manufacturing process of an integrated circuit. Often, they are used to undermine security in smartcards and cryptoprocessors, unless investment is made in anti-backdoor design methods. They have also been considered for car hacking. Backdoors differ from hardware Trojans as backdoors are introduced intentionally by the original designer or during the design process, whereas hardware Trojans are inserted later by an external party. == Background == The existence of hardware backdoors poses significant security risks for several reasons. They are difficult to detect and are impossible to remove using conventional methods like antivirus software. They can also bypass other security measures, such as disk encryption. Hardware trojans can be introduced during manufacturing where the end-user lacks control over the production chain. == History == In 2008, the FBI reported the discovery of approximately 3,500 counterfeit Cisco network components in the United States, some of which were introduced in military and government infrastructure. In the same year, the possibility of a backdoor SPARC CPU was demonstrated with an FPGA running Linux that supported various hidden malicious services. A few years later, in 2011, Jonathan Brossard presented "Rakshasa", a proof-of-concept hardware backdoor. This backdoor could be installed by an individual with physical access to the hardware. It utilized coreboot to re-flash the BIOS with a SeaBIOS and iPXE-based bootkit composed of legitimate, open-source tools, allowing malware to be fetched from the internet during the boot process. The following year, in 2012, Sergei Skorobogatov and Christopher Woods from the University of Cambridge Computer Laboratory reported the discovery of a backdoor in a military-grade FPGA device, which could be exploited to access and modify sensitive information. It has been said that this was proven to be a software problem and not a deliberate attempt at sabotage. This still brought to attention that equipment manufacturers should ensure that microchips operate as intended. Later that year, two mobile phones developed by the Chinese company ZTE were found to carry a root access backdoor. According to security researcher Dmitri Alperovitch, the exploit used a hard-coded password in its software. Starting in 2012, the United States stated that Huawei might have backdoors present in their products. In 2013, researchers at the University of Massachusetts devised a method of breaking a CPU's internal cryptographic mechanisms by introducing specific impurities into the crystalline structure of transistors to change Intel's random-number generator. Documents revealed from 2013 onwards during the surveillance disclosures initiated by Edward Snowden showed that the Tailored Access Operations (TAO) unit and other NSA employees intercepted servers, routers, and other network gear being shipped to organizations targeted for surveillance to install covert implant firmware onto them before delivery. These tools include custom BIOS exploits that survive the reinstallation of operating systems and USB cables with spy hardware and radio transceiver packed inside. In June 2016 it was reported that University of Michigan Department of Electrical Engineering and Computer Science had built a hardware backdoor that leveraged "analog circuits to create a hardware attack" so that after the capacitors store up enough electricity to be fully charged, it would be switched on, to give an attacker complete access to whatever system or device − such as a PC − that contains the backdoored chip. In the study that won the "best paper" award at the IEEE Symposium on Privacy and Security they also note that microscopic hardware backdoor wouldn't be caught by practically any modern method of hardware security analysis, and could be planted by a single employee of a chip factory. In October 2018 Bloomberg reported that an attack by Chinese spies reached almost 30 U.S. companies, including Amazon and Apple, by compromising America's technology supply chain. == Countermeasures == Skorobogatov has developed a technique capable of detecting malicious insertions into chips. New York University Tandon School of Engineering researchers have developed a way to corroborate a chip's operation using verifiable computing whereby "manufactured for sale" chips contain an embedded verification module that proves the chip's calculations are correct and an associated external module validates the embedded verification module. Another technique developed by researchers at University College London (UCL) relies on distributing trust between multiple identical chips from disjoint supply chains. Assuming that at least one of those chips remains honest the security of the device is preserved. Researchers at the University of Southern California Ming Hsieh Department of Electrical and Computer Engineering and the Photonic Science Division at the Paul Scherrer Institute have developed a new technique called Ptychographic X-ray laminography. This technique is the only current method that allows for verification of the chips blueprint and design without destroying or cutting the chip. It also does so in significantly less time than other current methods. Anthony F. J. Levi Professor of electrical and computer engineering at University of Southern California explains “It’s the only approach to non-destructive reverse engineering of electronic chips—[and] not just reverse engineering but assurance that chips are manufactured according to design. You can identify the foundry, aspects of the design, who did the design. It’s like a fingerprint.” This method currently is able to scan chips in 3D and zoom in on sections and can accommodate chips up to 12 millimeters by 12 millimeters easily accommodating an Apple A12 chip but not yet able to scan a full Nvidia Volta GPU. "Future versions of the laminography technique could reach a resolution of just 2 nanometers or reduce the time for a low-resolution inspection of that 300-by-300-micrometer segment to less than an hour, the researchers say."

  Read more →
• 

  Space-based data center

  Space-based data centers or orbital AI infrastructure are proposed concepts to build AI data centers in the sun-synchronous orbit or other orbits utilizing space-based solar power. Electric power has become the main bottleneck for terrestrial AI infrastructure. Space-based edge computing has historical roots in military architectures designed to bypass the latency of ground-based targeting networks. In the 1980s, the Strategic Defense Initiative's Brilliant Pebbles program first envisioned autonomous on-orbit data processing for missile defense. In 2019, the Space Development Agency (SDA) began to revive this decentralized approach through its Proliferated Warfighter Space Architecture (PWSA). This ambitious "sensor-to-shooter" infrastructure is treated as a prerequisite for the modern Golden Dome program, which would rely on space-based data processing to continuously track targets. == History == Early thinking about space-based computing infrastructure grew out of mid-20th-century visions for large orbital industrial systems, most notably proposals for space-based solar power, which were popularized in both technical literature and science writing by figures such as Isaac Asimov in the 1940s. These ideas emphasized exploiting the vacuum, continuous solar energy, and thermal characteristics of space to support power-intensive activities that would be difficult or inefficient on Earth. In the 21st century, advances in small satellites, reusable launch vehicles, and high-performance computing revived interest in space-based data centers, with governments and private companies exploring orbital or near-space platforms for edge computing, secure data handling, and low-latency processing of Earth-observation data. In September 2024, Y Combinator-backed Starcloud released a white paper detailing plans to build multiple gigawatts of AI compute in orbit. It was the first widely cited proposal to actually start building large orbital data centers. In 2025, Starcloud deployed an NVIDIA H100-class system and became the first company to train an LLM in space and run a version of Google Gemini in space. In March 2025, Lonestar deployed a data backup machine on the surface of the moon. In early January 2026, a team from the University of Pennsylvania presented a tether-based architecture for orbital data centers at the AIAA SciTech conference. The design relied on gravity gradient tension and solar-pressure-based passive attitude stabilization to minimize the mass of MW-scale orbital data centers. In January 2026, SpaceX filed plans with the Federal Communications Commission (FCC) for millions of satellites, leveraging reusable launches and Starlink integration to extend cloud and AI computing into orbit. Around the same time, Blue Origin announced the TeraWave constellation of about 5,400 satellites, designed to provide high‑throughput networking for data centers, enterprise, and government customers. Meanwhile, China announced a 200,000‑satellite constellation, focusing on state coordination, data sovereignty, and in-orbit processing for secure, time-critical applications. In February 2026, Starcloud submitted a proposal to the FCC for a constellation of up to 88,000 satellites for orbital data centers. In March, it announced intentions to be the first to mine Bitcoin in space, flying bitcoin mining ASICs on its second satellite, Starcloud-2. In May 2026, Edge Aerospace was awarded a contract by the European Space Agency under its Space Cloud program to study use cases, architectures and implementation roadmap for orbital data centers. == Feasibility == In October 2025, Nature Electronics published a study led by a research group at Nanyang Technological University on the development of carbon-neutral data centres in space. In November 2025, Google published a feasibility study on space-based data centers. The authors argued that if launch costs to low earth orbit reached US$200/kg, the launch cost for data center satellites could be cost effective relative to current energy costs for ground-based data centers. They project this may occur around 2035 if SpaceX's Starship project scales to 180 launches/year by then. == Advantages == Some sun-synchronous orbit (SSO) planes have constant sunlight in the dawn/dusk which could provide continuous solar energy. SSO is a limited resource and proper management and sharing of it is required. Solar irradiance is 36% higher in Earth orbit than on the surface No Earth weather storms or clouds, however more exposed to Solar storms. No property tax or land-use regulation. Saves space for other land use. Ample space for scalability. Won't strain the power grid. Direct access to power source without additional infrastructure. == Disadvantages == The deployment of space-based data centers raises several technical, economic, and environmental concerns. Existing launch costs are substantial and remains main cost of space infrastructure deployment Cooling is limited to heat dissipation through radiation only, which made in inefficient in comparison to convection in terrestrial data centers Space infrastructure must be designed to survive launch and to work under environment conditions of radiation, wide range of temperatures, in vacuum and in microgravity In-space assembly is on early development stage to enable deployment of mega-structures Megastructures are particularly exposed to orbital debris Solar arrays efficiency decrease 0.5% to 0.8% per year due to exposure of ultraviolet rays, space weather and orbital thermal cycles Hardware is designed for limited lifespan. Maintenance and repair in space (known as On-Orbit Servicing (OOS)) is still on early stage of practical implementation. Disposable data centre: technology obsolescence of AI data centre being a concern and difficult maintenance in space imply the single-use purpose of those space data centres. To extend lifetime, space infrastructure will require either refueling or orbit rasie by the servicer, which is going to increase its operational costs The environmental impact on Earth has its own challenges: The environmental impact of launches need to be addressed. Deployment consumes Earth resources that cannot be recovered or recycled. Computers require lots of resources, some of which are strategic. Recycling e-waste is already a challenge on Earth and extremely unlikely in space. Space debris (orbit pollution) is another sustainability challenge for space: Orbits are, like any resources, a limited physical and electromagnetic resource and available for all mankind. The accumulation of satellites on a particular orbit reduces the use of space for other purposes. A consequence of the increase of satellite in orbit is a higher risk of the runaway of space debris (see Kessler syndrome). This means some orbits could become unusable. Latency and bandwidth are constrained in space, and consumes limited electromagnetic resources. Satellite flares could inhibit ground-based and space-based observational astronomy. == Size and power generated == It would take ~1 square mile solar array in earth orbit to produce 1 gigawatt of power at 30% cell efficiency. == Companies pursuing space-based AI infrastructure == Blue Origin Cowboy Space Corporation (formerly Aetherflux) Edge Aerospace Google – Project Suncatcher Nvidia OpenAI SpaceX Starcloud

  Read more →
• 

  Texas House Bill 20

  An Act Relating to censorship of or certain other interference with digital expression, including expression on social media platforms or through electronic mail messages, also known as Texas House Bill 20 (HB20), is a Texas anti-deplatforming law enacted on September 9, 2021. It prohibits large social media platforms from removing, moderating, or labeling posts made by users in the state of Texas based on their "viewpoints", unless considered illegal under federal law or otherwise falling into exempted categories. It also requires them to make various public disclosures relating to their business practices (including the impact of algorithmic and moderation decisions on the content that is delivered to users). The bill is part of a wider array of Republican-backed legislation seeking to prohibit the censorship of political speech, based on allegations that the moderation policies of large social media platforms are not politically neutral. It has been challenged in NetChoice, LLC v. Paxton, and is currently the subject of a circuit split between the Fifth Circuit, and a decision by the Eleventh Circuit that struck down a similar bill in the state of Florida. In September 2023, the U.S. Supreme Court agreed to hear NetChoice v. Paxton jointly with NetChoice v. Moody on questions of whether the Florida and Texas state laws are in compliance with the 1st Amendment. == Content == The law applies to "social media platforms" that serve users in the state of Texas, and have more than 50 million monthly active users in the United States. They are defined as any public internet website or application that allows users to "communicate with other users for the primary purpose of posting information, comments, messages, or images", excluding internet service providers, electronic mail, and services where communication features are "incidental to, directly related to, or dependent on" content that is pre-selected by the operator. In the bill, to "censor" is defined as to "block, ban, remove, deplatform, demonetize, de-boost, restrict, deny equal access or visibility to, or otherwise discriminate against" expression. The law prohibits social media platforms from "censoring on the basis of user viewpoint, user expression, or the ability of a user to receive the expression of others", or on the basis of a user's geographic location in Texas. This includes removal or labeling posts with warnings and disclaimers. Social media platforms may only censor content if it is unlawful, they are "specifically authorized" to do so by federal law, based on requests from "an organization with the purpose of preventing the sexual exploitation of children or protecting survivors of sexual abuse from ongoing harassment", or "directly incites" criminal activity or contains threats of violence against persons based on protected categories. It is disputed over whether this provision is actually enforceable, as it may be preempted by Section 230 of the Communications Decency Act (which states that the operators of interactive computer services are not responsible for the actions of their users). Social media platforms must make public disclosures regarding the algorithmic techniques and moderation polices that are used to determine the content provided to users, must publish a compliant acceptable use policy (AUP), and must publish a biannual transparency report containing specific details on all actions made by the service regarding the moderation of users and content. The law also prohibits email providers from "intentionally imped[ing] the transmission of another person's electronic mail message based on the content." == Legislative history == Texas Governor Greg Abbott signed the bill into law on September 9, 2021. Democrat-proposed amendments excluding Holocaust denial, terrorism content, and vaccine misinformation from the bill were rejected. Following a suit by the industry groups Computer & Communications Industry Association (CCIA) and NetChoice, NetChoice, LLC v. Paxton, the bill was blocked by U.S. District Judge Robert Pitman in December 2021, on First Amendment grounds. Texas appealed to the United States Court of Appeals for the Fifth Circuit. Judges Edith Jones, Andrew Oldham, and Leslie H. Southwick, lifted the injunction on May 11, 2022, but the decision was appealed to the Supreme Court which suspended the bill pending a full review in the Fifth Circuit. On September 16, 2022, the Fifth Circuit reversed the injunction, allowing the bill to take effect; Judge Oldham stated that the bill "chills censorship" and "does not chill speech", and accused the plaintiffs of "attempt[ing] to extract a freewheeling censorship right from the Constitution's free speech guarantee. The Platforms are not newspapers. Their censorship is not speech." Southwick dissented, stating that "we are in a new arena, a very extensive one, for speakers and for those who would moderate their speech. None of the precedents fit seamlessly." The CCIA and NetChoice requested a stay on the ruling and that the case be taken to the Supreme Court, arguing that the reversal conflicts with an Eleventh Circuit decision in NetChoice v. Moody which struck down a similar anti-moderation bill imposed by the state of Florida. On October 12, 2022, the Fifth Circuit granted the stay.

  Read more →
• 

  DBOS

  DBOS (Formerly Database-Oriented Operating System, now just DBOS) is an open source durable workflow execution software library written for the Python, TypeScript, Java, and Go programming languages. DBOS arose from a joint open source project from MIT and Stanford, after a discussion between Michael Stonebraker and Matei Zaharia on how to scale and improve scheduling and performance of millions of Apache Spark tasks. Today it is a commercial company that offers an open source system to add durable computing to any software, built on concepts derived from the joint research project. == History == === 2020: Academic R&D Project === DBOS originated in 2020 as a joint open source project between MIT, Stanford, and Carnegie Mellon. The project explored the idea of operating system services built atop a distributed database - a database-oriented operating system meant to simplify and improve the scalability, security and resilience of large-scale distributed applications. The basic concept was to run a multi-node multi-core, transactional, highly-available distributed database, such as VoltDB, as the only application for a microkernel, and then to implement scheduling, messaging, file systems and other operating system services on top of the database. The architectural philosophy is described by this quote from the abstract of their initial preprint: All operating system state should be represented uniformly as database tables, and operations on this state should be made via queries from otherwise stateless tasks. This design makes it easy to scale and evolve the OS without whole-system refactoring, inspect and debug system state, upgrade components without downtime, manage decisions using machine learning, and implement sophisticated security features. A prototype was built with competitive performance to existing systems. ==

  Read more →
• 

  Influence-for-hire

  Influence-for-hire or collective influence, refers to the economy that has emerged around buying and selling influence on social media platforms. == Overview == Companies that engage in the influence-for-hire industry range from content farms to high-end public relations agencies. Traditionally influence operations have largely been confined to public sector actors like intelligence agencies, in the influence-for-hire industry the groups conduction the operations are private with commerce being their primary consideration. However many of the clients in the influence-for-hire industry are countries or countries acting through proxies. They are often located in countries with less expensive digital labor. == History == In May 2021, Facebook took a Ukrainian influence-for-hire network offline. Facebook attributed the network to organizations and consultants linked to Ukrainian politicians including Andriy Derkach. During the COVID-19 pandemic state sponsored misinformation was spread through influence-for-hire networks. In August 2021, a report published by the Australian Strategic Policy Institute implicated the Chinese government and the ruling Chinese Communist Party in campaigns of online manipulation conducted against Australia and Taiwan using influence-for-hire.

  Read more →
• 

  Isotropic position

  In the fields of machine learning, the theory of computation, and random matrix theory, a probability distribution over vectors is said to be in isotropic position if its covariance matrix is proportional to the identity matrix. == Formal definitions == Let D {\textstyle D} be a distribution over vectors in the vector space R n {\textstyle \mathbb {R} ^{n}} . Then D {\textstyle D} is in isotropic position if, for vector v {\textstyle v} sampled from the distribution, E v v T = I d . {\displaystyle \mathbb {E} \,vv^{\mathsf {T}}=\mathrm {Id} .} A set of vectors is said to be in isotropic position if the uniform distribution over that set is in isotropic position. In particular, every orthonormal set of vectors is isotropic. As a related definition, a convex body K {\textstyle K} in R n {\textstyle \mathbb {R} ^{n}} is called isotropic if it has volume | K | = 1 {\textstyle |K|=1} , center of mass at the origin, and there is a constant α > 0 {\textstyle \alpha >0} such that ∫ K ⟨ x , y ⟩ 2 d x = α 2 | y | 2 , {\displaystyle \int _{K}\langle x,y\rangle ^{2}dx=\alpha ^{2}|y|^{2},} for all vectors y {\textstyle y} in R n {\textstyle \mathbb {R} ^{n}} ; here | ⋅ | {\textstyle |\cdot |} stands for the standard Euclidean norm.

  Read more →
• 

  Nanonetwork

  A nanonetwork or nanoscale network is a set of interconnected nanomachines (devices a few hundred nanometers or a few micrometers at most in size) which are able to perform only very simple tasks such as computing, data storing, sensing and actuation. Nanonetworks are expected to expand the capabilities of single nanomachines both in terms of complexity and range of operation by allowing them to coordinate, share and fuse information. Nanonetworks enable new applications of nanotechnology in the biomedical field, environmental research, military technology and industrial and consumer goods applications. Nanoscale communication is defined in IEEE P1906.1. == Communication approaches == Classical communication paradigms need to be revised for the nanoscale. The two main alternatives for communication in the nanoscale are based either on electromagnetic communication or on molecular communication. === Electromagnetic === This is defined as the transmission and reception of electromagnetic radiation from components based on novel nanomaterials. Recent advancements in carbon and molecular electronics have opened the door to a new generation of electronic nanoscale components such as nanobatteries, nanoscale energy harvesting systems, nano-memories, logical circuitry in the nanoscale and even nano-antennas. From a communication perspective, the unique properties observed in nanomaterials will decide on the specific bandwidths for emission of electromagnetic radiation, the time lag of the emission, or the magnitude of the emitted power for a given input energy, amongst others. For the time being, two main alternatives for electromagnetic communication in the nanoscale have been envisioned. First, it has been experimentally demonstrated that is possible to receive and demodulate an electromagnetic wave by means of a nanoradio, i.e., an electromechanically resonating carbon nanotube which is able to decode an amplitude or frequency modulated wave. Second, graphene-based nano-antennas have been analyzed as potential electromagnetic radiators in the terahertz band. === Molecular === Molecular communication is defined as the transmission and reception of information by means of molecules. The different molecular communication techniques can be classified according to the type of molecule propagation in walkaway-based, flow-based or diffusion-based communication. In walkway-based molecular communication, the molecules propagate through pre-defined pathways by using carrier substances, such as molecular motors. This type of molecular communication can also be achieved by using E. coli bacteria as chemotaxis. In flow-based molecular communication, the molecules propagate through diffusion in a fluidic medium whose flow and turbulence are guided and predictable. The hormonal communication through blood streams inside the human body is an example of this type of propagation. The flow-based propagation can also be realized by using carrier entities whose motion can be constrained on the average along specific paths, despite showing a random component. A good example of this case is given by pheromonal long range molecular communications. In diffusion-based molecular communication, the molecules propagate through spontaneous diffusion in a fluidic medium. In this case, the molecules can be subject solely to the laws of diffusion or can also be affected by non-predictable turbulence present in the fluidic medium. Pheromonal communication, when pheromones are released into a fluidic medium, such as air or water, is an example of diffusion-based architecture. Other examples of this kind of transport include calcium signaling among cells, as well as quorum sensing among bacteria. Based on the macroscopic theory of ideal (free) diffusion the impulse response of a unicast molecular communication channel was reported in a paper that identified that the impulse response of the ideal diffusion based molecular communication channel experiences temporal spreading. Such temporal spreading has a deep impact in the performance of the system, for example in creating the intersymbol interference (ISI) at the receiving nanomachine. In order to detect the concentration-encoded molecular signal two detection methods named sampling-based detection (SD) and energy-based detection (ED) have been proposed. While the SD approach is based on the concentration amplitude of only one sample taken at a suitable time instant during the symbol duration, the ED approach is based on the total accumulated number of molecules received during the entire symbol duration. In order to reduce the impact of ISI a controlled pulse-width based molecular communication scheme has been analysed. The work presented in showed that it is possible to realize multilevel amplitude modulation based on ideal diffusion. A comprehensive study of pulse-based binary and sinus-based, concentration-encoded molecular communication system have also been investigated.

  Read more →
• 

  HTTP cookie

  An HTTP cookie (also called web cookie, Internet cookie, browser cookie, or simply cookie) is a small block of data created by a web server while a user is browsing a website and placed on the user's computer or other device by the user's web browser. Cookies are placed on the device used to access a website, and more than one cookie may be placed on a user's device during a session. Cookies serve useful and sometimes essential functions on the web. They enable web servers to store stateful information (such as items added in the shopping cart in an online store) on the user's device or to track the user's browsing activity (including clicking particular buttons, logging in, or recording which pages were visited in the past). They can also be used to save information that the user previously entered into form fields, such as names, addresses, passwords, and payment card numbers for subsequent use. Authentication cookies are commonly used by web servers to authenticate that a user is logged in, and with which account they are logged in. Without the cookie, users would need to authenticate themselves by logging in on each page containing sensitive information that they wish to access. The security of an authentication cookie generally depends on the security of the issuing website and the user's web browser, and on whether the cookie data is encrypted. Security vulnerabilities may allow a cookie's data to be read by an attacker, used to gain access to user data, or used to gain access (with the user's credentials) to the website to which the cookie belongs (see cross-site scripting and cross-site request forgery for examples). Tracking cookies, and especially third-party tracking cookies, are commonly used as ways to compile long-term records of individuals' browsing histories — a potential privacy concern that prompted European and U.S. lawmakers to take action in 2011. European law requires that all websites targeting European Union member states gain "informed consent" from users before storing non-essential cookies on their device. == Background == === Origin of the name === The term cookie was coined by web-browser programmer Lou Montulli. It was derived from the term magic cookie, which is a packet of data a program receives and sends back unchanged, used by Unix programmers. === History === Magic cookies were already used in computing when computer programmer Lou Montulli had the idea of using them in web communications in June 1994. At the time, he was an employee of Netscape Communications, which was developing an e-commerce application for MCI. Vint Cerf and John Klensin represented MCI in technical discussions with Netscape Communications. MCI did not want its servers to have to retain partial transaction states, which led them to ask Netscape to find a way to store that state in each user's computer instead. Cookies provided a solution to the problem of reliably implementing a virtual shopping cart. Together with John Giannandrea, Montulli wrote the initial Netscape cookie specification the same year. Version 0.9beta of Mosaic Netscape, released on 13 October 1994, supported cookies. The first use of cookies (out of the labs) was checking whether visitors to the Netscape website had already visited the site. Montulli applied for a patent for the cookie technology in 1995, which was granted in 1998. Support for cookies was integrated with Internet Explorer in version 2, released in October 1995. The introduction of cookies was not widely known to the public at the time. In particular, cookies were accepted by default, and users were not notified of their presence. The public learned about cookies after the Financial Times published an article about them on 12 February 1996. In the same year, cookies received a lot of media attention, especially because of potential privacy implications. Cookies were discussed in two U.S. Federal Trade Commission hearings in 1996 and 1997. The development of the formal cookie specifications was already ongoing. In particular, the first discussions about a formal specification started in April 1995 on the www-talk mailing list. A special working group within the Internet Engineering Task Force (IETF) was formed. Two alternative proposals for introducing state in HTTP transactions had been proposed by Brian Behlendorf and David Kristol respectively. But the group, headed by Kristol himself and Lou Montulli, soon decided to use the Netscape specification as a starting point. In February 1996, the working group identified third-party cookies as a considerable privacy threat. The specification produced by the group was eventually published as RFC 2109 in February 1997. It specifies that third-party cookies were either not allowed at all, or at least not enabled by default. At this time, advertising companies were already using third-party cookies. The recommendation about third-party cookies of RFC 2109 was not followed by Netscape and Internet Explorer. RFC 2109 was superseded by RFC 2965 in October 2000. RFC 2965 added a Set-Cookie2 header field, which informally came to be called "RFC 2965-style cookies" as opposed to the original Set-Cookie header field which was called "Netscape-style cookies". Set-Cookie2 was seldom used, however, and was deprecated in RFC 6265 in April 2011 which was written as a definitive specification for cookies as used in the real world. No modern browser recognizes the Set-Cookie2 header field. == Terminology == === Session cookie === A session cookie (also known as an in-memory cookie, transient cookie or non-persistent cookie) exists only in temporary memory while the user navigates a website. Session cookies expire or are deleted when the user closes the web browser. Session cookies are identified by the browser by the absence of an expiration date assigned to them. === Persistent cookie === A persistent cookie expires at a specific date or after a specific length of time. For the persistent cookie's lifespan set by its creator, its information will be transmitted to the server every time the user visits the website that it belongs to, or every time the user views a resource belonging to that website from another website (such as an advertisement). For this reason, persistent cookies are sometimes referred to as tracking cookies because they can be used by advertisers to record information about a user's web browsing habits over an extended period of time. Persistent cookies are also used for reasons such as keeping users logged into their accounts on websites, to avoid re-entering login credentials at every visit. (See § Uses, below.) === Secure cookie === A secure cookie can only be transmitted over an encrypted connection (i.e. HTTPS). They cannot be transmitted over unencrypted connections (i.e. HTTP). This makes the cookie less likely to be exposed to cookie theft via eavesdropping. A cookie is made secure by adding the Secure flag to the cookie. === Http-only cookie === An http-only cookie cannot be accessed by client-side APIs, such as JavaScript. This restriction eliminates the threat of cookie theft via cross-site scripting (XSS). However, the cookie remains vulnerable to cross-site tracing (XST) and cross-site request forgery (CSRF) attacks. A cookie is given this characteristic by adding the HttpOnly flag to the cookie. === Same-site cookie === In 2016 Google Chrome version 51 introduced a new kind of cookie with attribute SameSite with possible values of Strict, Lax or None. With attribute SameSite=Strict, the browsers would only send cookies to a target domain that is the same as the origin domain. This would effectively mitigate cross-site request forgery (CSRF) attacks. With SameSite=Lax, browsers would send cookies with requests to a target domain even it is different from the origin domain, but only for safe requests such as GET (POST is unsafe) and not third-party cookies (inside iframe). Attribute SameSite=None would allow third-party (cross-site) cookies, however, most browsers require secure attribute on SameSite=None cookies. The Same-site cookie is incorporated into a new RFC draft for "Cookies: HTTP State Management Mechanism" to update RFC 6265 (if approved). Chrome, Firefox, and Edge started to support Same-site cookies. The key of rollout is the treatment of existing cookies without the SameSite attribute defined, Chrome has been treating those existing cookies as if SameSite=None, this would let all website/applications run as before. Google intended to change that default to SameSite=Lax in Chrome 80 planned to be released in February 2020, but due to potential for breakage of those applications/websites that rely on third-party/cross-site cookies and COVID-19 circumstances, Google postponed this change to Chrome 84. === Supercookie === A supercookie is a cookie with an origin of a top-level domain (such as .com) or a public suffix (such as .co.uk). Ordinary cookies, by contrast, have an origin of a specific domain name, such as ex

  Read more →