AI Code Ui

AI Code Ui — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

  • Neighborhood operation

    Neighborhood operation

    In computer vision and image processing a neighborhood operation is a commonly used class of computations on image data which implies that it is processed according to the following pseudo code: Visit each point p in the image data and do { N = a neighborhood or region of the image data around the point p result(p) = f(N) } This general procedure can be applied to image data of arbitrary dimensionality. Also, the image data on which the operation is applied does not have to be defined in terms of intensity or color, it can be any type of information which is organized as a function of spatial (and possibly temporal) variables in p. The result of applying a neighborhood operation on an image is again something which can be interpreted as an image, it has the same dimension as the original data. The value at each image point, however, does not have to be directly related to intensity or color. Instead it is an element in the range of the function f, which can be of arbitrary type. Normally the neighborhood N is of fixed size and is a square (or a cube, depending on the dimensionality of the image data) centered on the point p. Also the function f is fixed, but may in some cases have parameters which can vary with p, see below. In the simplest case, the neighborhood N may be only a single point. This type of operation is often referred to as a point-wise operation. == Examples == The most common examples of a neighborhood operation use a fixed function f which in addition is linear, that is, the computation consists of a linear shift invariant operation. In this case, the neighborhood operation corresponds to the convolution operation. A typical example is convolution with a low-pass filter, where the result can be interpreted in terms of local averages of the image data around each image point. Other examples are computation of local derivatives of the image data. It is also rather common to use a fixed but non-linear function f. This includes median filtering, and computation of local variances. The Nagao-Matsuyama filter is an example of a complex local neighbourhood operation that uses variance as an indicator of the uniformity within a pixel group. The result is similar to a convolution with a low-pass filter with the added effect of preserving sharp edges. There is also a class of neighborhood operations in which the function f has additional parameters which can vary with p: Visit each point p in the image data and do { N = a neighborhood or region of the image data around the point p result(p) = f(N, parameters(p)) } This implies that the result is not shift invariant. Examples are adaptive Wiener filters. == Implementation aspects == The pseudo code given above suggests that a neighborhood operation is implemented in terms of an outer loop over all image points. However, since the results are independent, the image points can be visited in arbitrary order, or can even be processed in parallel. Furthermore, in the case of linear shift-invariant operations, the computation of f at each point implies a summation of products between the image data and the filter coefficients. The implementation of this neighborhood operation can then be made by having the summation loop outside the loop over all image points. An important issue related to neighborhood operation is how to deal with the fact that the neighborhood N becomes more or less undefined for points p close to the edge or border of the image data. Several strategies have been proposed: Compute result only for points p for which the corresponding neighborhood is well-defined. This implies that the output image will be somewhat smaller than the input image. Zero padding: Extend the input image sufficiently by adding extra points outside the original image which are set to zero. The loops over the image points described above visit only the original image points. Border extension: Extend the input image sufficiently by adding extra points outside the original image which are set to the image value at the closest image point. The loops over the image points described above visit only the original image points. Mirror extension: Extend the image sufficiently much by mirroring the image at the image boundaries. This method is less sensitive to local variations at the image boundary than border extension. Wrapping: The image is tiled, so that going off one edge wraps around to the opposite side of the image. This method assumes that the image is largely homogeneous, for example a stochastic image texture without large textons.

    Read more →
  • E-Science librarianship

    E-Science librarianship

    E-Science librarianship refers to a role for librarians in e-Science. == Early scholars == Early references to e-Science and librarianship involve information studies scholars researching cyberinfrastructure and emerging networked information and knowledge communities. Notably Christine Borgman, Professor and Presidential Chair in Information Studies at the University of California, Los Angeles (UCLA) was a key player in bringing e-Science, and the idea of networked knowledge communities, to the attention of the library profession. In 2004, as a visiting fellow at the Oxford Internet Institute, she conducted research and lectured publicly on e-Science, Digital Libraries, and Knowledge Communities. In 2007 Anna K. Gold, formerly of MIT and Cal Poly, San Luis Obispo, authored a series of articles in D-Lib Magazine that opened the door for academic libraries to begin exploring roles, skills, and strategies for engaging in e-Science: Cyberinfrastructure, Data, and Libraries, Part 1: A Cyberinfrastructure Primer for Librarians and Cyberinfrastructure, Data, and Libraries, Part 2: Libraries and the Data Challenge: Roles and Actions for Libraries. == Academic research and health sciences libraries == In 2007, the Association of Research Libraries (ARL) e-Science task force issued its report on e-Science and librarianship. The ARL's report encouraged its member libraries to position themselves to engage with researchers involved in e-Science (eScience) by cultivating new research support strategies and developing their digital scholarship infrastructure. E-Science has multiple attributes; Tony and Jessie Hey framed e-Science for the library community by characterizing it as a research methodology: "e-Science is not a new scientific discipline in its own right: e-Science is shorthand for the set of tools and technologies required to support collaborative, networked science". In addition to academic libraries' interests in providing support for their researchers engaging in e-Science, the health sciences library community also emerged as a major proponent for creating librarian positions for supporting the information needs of large-scale, networked, research collaborations on their campuses. Neil Rambo, current director of NYU's Health Sciences Library and former director of University of Washington Health Sciences Library, was the first to use the term in the Journal of the Medical Library Association, in his 2009 editorial e-Science and the Biomedical Library. Rambo's definition of e-Science highlighted the potential e-Science held for creating data as a research product: "E-science is a new research methodology, fueled by networked capabilities and the practical possibility of gathering and storing vast amounts of data." In response to this article the University of Massachusetts Medical School Lamar Soutter Library and National Network of Libraries of Medicine, New England Region encouraged health sciences libraries to cooperate to identify skills and develop a program for training e-Science Librarians. Then, in 2013, Shannon Bohle, an archivist who was employed in the library at Cold Spring Harbor Laboratory, an NCI-designated basic cancer research facility, used experience gained there and previous papers and presentations about preserving scientific archival materials to expand the traditional definition of e-Science by including the terms, principles, and practices used in archival science. These included in the definition the "long-term storage and accessibility of all materials generated through the scientific process," as well as examples of material types traditionally preserved in archives, like "electronic/digitized laboratory notebooks, raw and fitted data sets, manuscript production and draft versions, pre-prints," as well as library materials ("print and/or electronic publications"). == Roles == Many areas of science are about to be transformed by the availability of vast amounts of new scientific data that can potentially provide insights at a level of detail never before envisaged. However, this new data dominant era brings new challenges for the scientists and they will need the skills and technologies both of computer scientists and of the library community to manage, search and curate these new data resources. Libraries will not be immune from change in this new world of research. Karen Williams identifies roles in the following areas for librarians in the developing world of e-Science. Campus Engagement Content/Collection Development and Management Teaching and Learning Scholarly Communication E-Scholarship and Digital Tools Reference/Help Services Outreach Fund Raising Exhibit and Event Planning Leadership == Challenges for research libraries == E-science tends toward inter- and multidisciplinary approaches that depend on computation and computer science. Research libraries have traditionally been discipline focused and, although increasingly technologically sophisticated, do not have systems of the scale or complexity of the e-science environment. E-science is data intensive, but research libraries have not typically been responsible for scientific data. E-science is frequently conducted in a team context, often distributed across multiple institutions and on a global scale. The primary constituency of libraries generally comprises those affiliated with the local institution. Licenses for electronic content are typically restricted to a particular institutional community, and the infrastructure to move institutional licenses into a multi-institutional environment is not well developed. E-science challenges all these traditional paradigms of research library organization and services. == Skills == Garritano & Carlson were among the first to outline a skill set for librarians seeking to support the data needs of e-Science; they identified five skill categories librarians new to this area should expect to adapt or develop when participating on such projects: Library and information science expertise Subject expertise Partnerships and outreach (both internal and external) Participating in sponsored research Balancing workload An example of librarians reconfiguring traditional librarian skills to meet the needs of researchers engaging in e-Science is Witt & Carlson's adaptation of the traditional reference interview into a "data interview" in order to provide effective data management and e-Science services. This interview consists of ten practical queries necessary for understanding the provenance and expectations for the preservation of datasets typical of e-Science that also help illustrate some of the educational tools and skills needed by a librarian new to e-Science. "What is the story of the data? What form and format are the data in? What is the expected lifespan of the dataset? How could the data be used, reused, and repurposed? How large is the dataset, and what is its rate of growth? Who are the potential audiences for the data? Who owns the data? Does the dataset include any sensitive information? What publications or discoveries have resulted from the data? How should the data be made accessible?" == Resources == In 2009 the Lamar Soutter Library at the University of Massachusetts Medical School (UMMS) and the National Network of Libraries of Medicine, New England Region (NN/LM NER) funded an e-Science program for building the skills highlighted above for librarians. Elaine Russo Martin, Director of Library Services at the Lamar Soutter Library and Director of the NN/LM NER developed this comprehensive e-Science program to build librarians' subject expertise in the sciences, developing their data management skills, and their familiarity with cyberinfrastructure and e-Science. Three major products of this program are the e-Science web portal for librarians, the E-Science Symposium, and the New England Collaborative Data Management Curriculum (NECDMC). This portal includes educational resources for specific tools and subject/discipline tutorials and modules to assist librarians new to e-Science. UMMS and NN/LM NER also publish an open access journal called the Journal of eScience Librarianship.

    Read more →
  • Sedona Canada Principles

    Sedona Canada Principles

    The Sedona Canada Principles are a set of authoritative guidelines published by The Sedona Conference to aid members of the Canadian legal community involved in the identification, collection, preservation, review and production of electronically stored information (ESI). The principles were drafted by a small group of lawyers, judges and technologists called the Sedona Working Group 7 or Sedona Canada. Sedona Canada is an offshoot of The Sedona Conference which is an American "non-profit ... research and educational institute dedicated to the advanced study of law and policy in the areas of antitrust law, complex litigation, and intellectual property rights". == Background == Civil procedure in Canada is jurisdictional with each province following its own rules of civil procedure. However, each province must address the fact that due to the advancement of technology the discovery process enshrined in the rules of civil procedure can be potentially derailed due to the sheer volume of electronically stored information (ESI). When dealing with litigation matters that involve electronically stored information (ESI), the discovery process is commonly called e-discovery. The problems associated with e-discovery in Canada led to the creation of the Sedona Canada Principles. Rule 29.1.03(4) of the wikibooks:Ontario Rules of Civil Procedure specifically refers to the Sedona Canada Principles in referencing Principles re Electronic Discovery although it has been reported that this rule has been largely ignored in practice. == Summary == The Sedona Canada Principles largely refer to the processes found in the Electronic Discovery Reference Model. The principles urge proportionality due to the potentially enormous volumes of documents that may be discoverable when dealing with ESI. They also encourage good faith in the document preservation stage and regular meetings between parties to discuss the scope of the litigation. Parties are urged to be aware of the potential costs involved in producing relevant ESI but are advised that only reasonably accessible ESI need be produced. The principles stipulate that parties should not be required to search for or collect deleted material unless there is an agreement or court order related to those terms. The use of electronic tools and processes such as data sampling and web harvesting are acceptable practices. Parties are encouraged to agree early in the litigation process on production format required for the exchange of relevant documents as part of the discovery process (native files, pdf, tiff, metadata requirements etc.). Agreements or direction should be sought, if necessary, with respect to privilege or other confidential information related to production of electronic documents and data. Parties should be aware that legal precedents can be formed as a result of e-discovery practices and sanctions can be considered for a party's failure to meet their discovery obligations unless it can be demonstrated that the failure was not intentional. All parties must bear the “reasonable” costs associated with e-discovery but other arrangements can be agreed upon by the parties or by court order. == Caselaw == In Warman v. National Post Company proportionality was at issue in a case where the plaintiff was suing the defendant for libel. A motion was brought by the defendant to have the plaintiff provide a mirror image of his hard drive in an effort to prove an internet article was indeed authored by the plaintiff. Issues of proportionality and the work of the Sedona Conference and Sedona Canada Principles were factored in to the decision to grant the defendant only limited access to the hard drive. In Innovative Health Group Inc. v. Calgary Health Region the plaintiff's legal obligation to produce imaged hard drives is in question. Justice Conrad refers to the advice of Sedona Canada on proportionality and problems associated with time and expense related to the difficulties associated with electronically stored information. In York University v. Michael Markicevic Justice Brown specifically refers to the need for the parties to agree upon a formal e-discovery plan to be drafted in consultation with Sedona Canada Principles. In Friends of Lansdowne v. Ottawa Master MacLeod refers to the need for Sedona Canada principles and states “This is particularly true in the current information age when e-mail is ubiquitous and multiple copies or variants of messages may be held on various kinds of data storage devices including individual hard drives, e-mail and Blackberry servers. Even documents that ultimately exist in paper form normally begin their life on computers and negotiations frequently involve exchanges of electronic drafts. To find every scrap of paper and every electronic trace of relevant information has become a nightmarish task that threatens to render any kind of litigation extravagantly expensive.” == Criticism == Critics of the Sedona Canada Principles believe they should address system integrity and that the true history of any file preserved cannot be identified without proof of the integrity of the electronic record systems management it comes from. Other criticism is more directed to the Sedona Canada working group and complaints that it is insular and irrelevant.

    Read more →
  • Tagsistant

    Tagsistant

    Tagsistant is a semantic file system for the Linux kernel, written in C and based on FUSE. Unlike traditional file systems that use hierarchies of directories to locate objects, Tagsistant introduces the concept of tags. == Design and differences with hierarchical file systems == In computing, a file system is a type of data store which could be used to store, retrieve and update files. Each file can be uniquely located by its path. The user must know the path in advance to access a file and the path does not necessarily include any information about the content of the file. Tagsistant uses a complementary approach based on tags. The user can create a set of tags and apply those tags to files, directories and other objects (devices, pipes, ...). The user can then search all the objects that match a subset of tags, called a query. This kind of approach is well suited for managing user contents like pictures, audio recordings, movies and text documents but is incompatible with system files (like libraries, commands and configurations) where the univocity of the path is a security requirement to prevent the access to a wrong content. == The tags/ directory == A Tagsistant file system features four main directories: archive/ relations/ stats/ tags/ Tags are created as sub directories of the tags/ directory and can be used in queries complying to this syntax: tags/subquery/[+/subquery/[+/subquery/]]/@/ where a subquery is an unlimited list of tags, concatenated as directories: tag1/tag2/tag3/.../tagN/ The portion of a path delimited by tags/ and @/ is the actual query. The +/ operator joins the results of different sub-queries in one single list. The @/ operator ends the query. To be returned as a result of the following query: tags/t1/t2/+/t1/t4/@/ an object must be tagged as both t1/ and t2/ or as both t1/ and t4/. Any object tagged as t2/ or t4/, but not as t1/ will not be retrieved. The query syntax deliberately violates the POSIX file system semantics by allowing a path token to be a descendant of itself, like in tags/t1/t2/+/t1/t4/@ where t1/ appears twice. As a consequence a recursive scan of a Tagsistant file system will exit with an error or endlessly loop, as done by Unix find: This drawback is balanced by the possibility to list the tags inside a query in any order. The query tags/t1/t2/@/ is completely equivalent to tags/t2/t1/@/ and tags/t1/+/t2/t3/@/ is equivalent to tags/t2/t3/+/t1/@/. The @/ element has the precise purpose of restoring the POSIX semantics: the path tags/t1/@/directory/ refers to a traditional directory and a recursive scan of this path will properly perform. == The reasoner and the relations/ directory == Tagsistant features a simple reasoner which expands the results of a query by including objects tagged with related tags. A relation between two tags can be established inside the relations/ directory following a three level pattern: relations/tag1/rel/tag2/ The rel element can be includes or is_equivalent. To include the rock tag in the music tag, the Unix command mkdir can be used: mkdir -p relations/music/includes/rock The reasoner can recursively resolve relations, allowing the creation of complex structures: mkdir -p relations/music/includes/rock mkdir -p relations/rock/includes/hard_rock mkdir -p relations/rock/includes/grunge mkdir -p relations/rock/includes/heavy_metal mkdir -p relations/heavy_metal/includes/speed_metal The web of relations created inside the relations/ directory constitutes a basic form of ontology. == Autotagging plugins == Tagsistant features an autotagging plugin stack which gets called when a file or a symlink is written. Each plugin is called if its declared MIME type matches The list of working plugins released with Tagsistant 0.6 is limited to: text/html: tags the file with each word in and <keywords> elements and with document, webpage and html too image/jpeg: tags the file with each Exif tag == The repository == Each Tagsistant file system has a corresponding repository containing an archive/ directory where the objects are actually saved and a tags.sql file holding tagging information as an SQLite database. If the MySQL database engine was specified with the --db argument, the tags.sql file will be empty. Another file named repository.ini is a GLib ini store with the repository configuration. Tagsistant 0.6 is compatible with the MySQL and Sqlite dialects of SQL for tag reasoning and tagging resolution. While porting its logic to other SQL dialects is possible, differences in basic constructs (especially the INTERSECT SQL keyword) must be considered. == The archive/ and stats/ directories == The archive/ directory has been introduced to provide a quick way to access objects without using tags. Objects are listed with their inode number prefixed. The stats/ directory features some read-only files containing usage statistics. A file configuration holds both compile time information and current repository configuration. == Main criticisms == It has been highlighted that relying on an external database to store tags and tagging information could cause the complete loss of metadata if the database gets corrupted. It has been highlighted that using a flat namespace tends to overcrowd the tags/ directory. This could be mitigated introducing triple tags.</p> <a href="https://aizhi.co/html/60b799932.html" class="read-more" title="Tagsistant">Read more →</a> </div> </article> </li> <li class="article-item"> <article class="article-card"> <a href="https://aizhi.co/html/339c299658.html" class="card-thumb-link" title="Cloud Native Computing Foundation"><img class="card-thumb" src="https://upload.wikimedia.org/wikipedia/commons/thumb/3/3a/In_the_studio.JPG/960px-In_the_studio.JPG" alt="Cloud Native Computing Foundation" loading="lazy"></a> <div class="card-body"> <h2><a href="https://aizhi.co/html/339c299658.html" title="Cloud Native Computing Foundation">Cloud Native Computing Foundation</a></h2> <p class="article-excerpt">The Cloud Native Computing Foundation (CNCF) is a subsidiary of the Linux Foundation founded in 2015 to support cloud-native computing. == History == It was announced alongside Kubernetes 1.0, an open source container cluster manager, which was contributed to the Linux Foundation by Google as a seed technology. Founding members include Google, CoreOS, Mesosphere, Red Hat, Twitter, Huawei, Intel, RX-M, Cisco, IBM, Docker, Univa, and VMware. Today, CNCF is supported by over 450 members. In August 2018 Google announced that it was handing over operational control of Kubernetes to the community. == Projects == Argo is a collection of tools for getting work done with Kubernetes. Among its main features are Workflows and Events. It was accepted to CNCF on March 26, 2020 at the Incubating maturity level and then moved to the Graduated maturity level on December 6, 2022. cert-manager provisions and manages TLS certificates in Kubernetes. It was accepted to CNCF on November 10, 2020, moved to the Incubating maturity level on September 19, 2022, and then moved to the Graduated maturity level on September 29, 2024. Cilium provides networking, security, and observability for Kubernetes deployments using eBPF technology. It joined the CNCF at incubation level in October 2021 and the CNCF announced its graduation in October 2023. containerd is an industry-standard core container runtime. It is currently available as a daemon for Linux and Windows, which can manage the complete container lifecycle of its host system. In 2015, Docker donated the OCI Specification to The Linux Foundation with a reference implementation called runc. Since February 28, 2019 it is an official CNCF project. Its general availability and intention to donate the project to CNCF was announced by Docker in 2017. CoreDNS is a DNS server that chains plugins. Its graduation was announced in 2019. Dapr, the distributed application runtime, provides APIs for building secure and reliable microservices and agentic AI systems. Dapr was donated to the CNCF in November 2021 and joined at incubation level. The CNCF announced its graduation in November 2024. Envoy: Originally built at Lyft to move their architecture away from a monolith, Envoy is a high-performance open source edge and service proxy that makes the network transparent to applications. Lyft contributed Envoy to Cloud Native Computing Foundation in September 2017. etcd is a distributed key value store, providing a method of storing data across a cluster of machines. It became a CNCF incubating project in 2018 at KubeCon+CloudNativeCon North America in Seattle that year. Falco is an open source and cloud native runtime security initiative. It is the "de facto Kubernetes threat detection engine". It became an incubating project in January 2020 and graduated in February 2024. Flux is an open source project for powering GitOps in Kubernetes clusters. It provides the GitOps Toolkit, a set of Kubernetes APIs that allow you to define how configuration source code is securely pulled into your cluster and deployed by popular Kubernetes manifests rendering engines like Kustomize and Helm. The most recommended source mechanism is the OCIRepository API, which provides enhanced security and benefits from container image tooling out there. Flux has also notification integrations with popular services like Prometheus Alertmanager, PagerDuty, Slack and so on. Flux has graduated in CNCF in 2022. Harbor is an "open source trusted cloud native registry project that stores, signs, and scans content." It became an incubating project in September 2019 and graduated in June 2020. Helm is a package manager that helps developers "easily manage and deploy applications onto the Kubernetes cluster." It joined the incubating level in June 2018 and graduated in April 2020. Istio is a service mesh technology. It was accepted by CNCF in September 2022 and graduated on July 12, 2023. Jaeger, Created by Uber Engineering, Jaeger is an open source distributed tracing system inspired by Google Dapper paper and OpenZipkin community. It can be used for tracing microservice-based architectures, including distributed context propagation, distributed transaction monitoring, root cause analysis, service dependency analysis, and performance/latency optimization. The Cloud Native Computing Foundation Technical Oversight Committee voted to accept Jaeger as the 12th hosted project in September 2017 and became a graduated project in 2019. In 2020 it became an approved and fully integrated part of the CNCF ecosystem. Kubernetes is an open source framework for automating deployment and managing applications in a containerized and clustered environment. "It aims to provide better ways of managing related, distributed components across the varied infrastructure." It was originally designed by Google and donated to The Linux Foundation to form the Cloud Native Computing Foundation with Kubernetes as the seed technology. The "large and diverse" community supporting the project has made its staying power more robust than other, older technologies of the same ilk. In January 2020, the CNCF annual report showed significant growth in interest, training, event attendance and investment related to Kubernetes. Linkerd is CNCF's fifth member project, and the project that coined the term "service mesh". Linkerd adds observability, security, and reliability features to applications by adding them to the platform rather than the application layer, and features a "micro-proxy" to maximize speed and security of its data plane. Linkerd graduated from CNCF in July 2021. Open Policy Agent (OPA) is "an open source general-purpose policy engine and language for cloud infrastructure." It became a CNCF incubating project in April 2019. OPA graduated from CNCF in February 2021. Prometheus is a cloud monitoring tool sponsored by SoundCloud in early iterations. In August 2018, the tool was designated a graduated project by the Cloud Native Computing Foundation. It is now a Cloud Native Computing Foundation member project. Rook is CNCF's first cloud native storage project. It became an incubation level project in 2018 and graduated in October 2020. SPIFFE is an open standard and framework for workload identity, much the same way that OAuth is an open standard and framework for human identity. It is built from the ground up to accommodate modern computing environments, which operate with systems scale and velocity (as opposed to human scale and velocity), while still maintaining interoperability with existing technologies like OAuth and X.509 Public key infrastructure. Unlike other identity standards, SPIFFE supports multiple credential types for a single identity, ensuring that the highly varied needs of production environments are consistently met without compromise. SPIFFE joined the CNCF as a sandbox project in 2018, was accepted to incubation in 2020, and graduated in 2022. SPIRE is an open source identity provider for workloads based on the SPIFFE framework. It is highly pluggable, and fills the attestation and issuance needs required by any workload identity solution. The plugin interfaces it exposes allows users to write integrations with in-house systems, build internal self-service portals, and more. It is a very powerful building block for issuing short-lived identity credentials to dynamic cloud workloads. SPIRE became a CNCF Graduated project in 2022. The Update Framework (TUF) helps developers to secure new or existing software update systems, which are often found to be vulnerable to many known attacks. TUF addresses this widespread problem by providing a comprehensive, flexible security framework that developers can integrate with any software update system. TUF was CNCF's first security-focused project and the ninth project overall to graduate from the foundation's hosting program. TiKV provides a distributed key–value database. Vitess is a database clustering system for horizontal scaling of MySQL, first created for internal use by YouTube. It became a CNCF project in 2018 and graduated in November 2019. Contour is a management server for Envoy that can direct the management of Kubernetes' traffic. Contour also provides routing features that are more advanced than Kubernetes' out-of-the-box Ingress specification. VMWare contributed the project to CNCF in July 2020. Cortex offers horizontally scalable, multi-tenant, long-term storage for Prometheus and works alongside Amazon DynamoDB, Google Bigtable, Cassandra, S3, GCS, and Microsoft Azure. It was introduced into the ecosystem incubator alongside Thanos in August 2020. CRI-O is an Open Container Initiative (OCI) based "implementation of Kubernetes Container Runtime Interface". CRI-O allows Kubernetes to be container runtime-agnostic. It became an incubating project in 2019. gRPC is a "modern open source high performance RPC framework that can run in any environment." The project was formed in 2015 when Google decided to open sou</p> <a href="https://aizhi.co/html/339c299658.html" class="read-more" title="Cloud Native Computing Foundation">Read more →</a> </div> </article> </li> <li class="article-item"> <article class="article-card"> <a href="https://aizhi.co/html/239f799753.html" class="card-thumb-link" title="TurboQuant"><img class="card-thumb" src="https://upload.wikimedia.org/wikipedia/commons/thumb/4/48/Infogramlogo.svg/960px-Infogramlogo.svg.png" alt="TurboQuant" loading="lazy"></a> <div class="card-body"> <h2><a href="https://aizhi.co/html/239f799753.html" title="TurboQuant">TurboQuant</a></h2> <p class="article-excerpt">TurboQuant is an online vector quantization algorithm for compressing high-dimensional Euclidean vectors while preserving their geometric structure. It was proposed in 2025 by Amir Zandieh, Majid Daliri, Majid Hadian, and Vahab Mirrokni in the paper TurboQuant: Online Vector Quantization with Near-optimal Distortion Rate. The paper lists Zandieh and Mirrokni as affiliated with Google Research, Daliri with New York University, and Hadian with Google DeepMind. The method was developed for applications including large language model (LLM) inference, key–value (KV) cache compression, vector databases, and nearest neighbor search. TurboQuant consists of two related algorithms: TurboQuantmse, which is optimized for mean squared error (MSE), and TurboQuantprod, which is optimized for unbiased inner product estimation. The algorithm uses a random rotation of input vectors, applies scalar quantizers to the rotated coordinates, and, for inner-product estimation, applies a one-bit Quantized Johnson–Lindenstrauss (QJL) transform to the residual error. == Background == Vector quantization is a compression method that maps high-dimensional vectors to a finite set of codewords. The problem has roots in Shannon's source coding theory and rate–distortion theory. In machine learning and information retrieval, vector quantization is used to reduce the memory required to store embeddings, activation vectors, and other numerical representations. In Transformer-based large language models, the KV cache stores key and value vectors from previous tokens during autoregressive decoding. The size of this cache grows with context length, the number of attention heads, and the number of concurrent requests, making it a major memory bottleneck in LLM serving. Similar compression problems appear in vector search, where large collections of embedding vectors must be stored and searched efficiently. Earlier approaches to vector quantization include product quantization, scalar quantization, and data-dependent k-means codebook construction. The TurboQuant paper argues that many existing methods either require offline preprocessing and calibration or suffer from suboptimal distortion guarantees in online settings. == Algorithm == === TurboQuantmse === TurboQuantmse is the version of the algorithm optimized for mean-squared error. For a unit vector x ∈ S d − 1 {\displaystyle x\in S^{d-1}} , the algorithm first applies a random rotation matrix Π ∈ R d × d {\displaystyle \Pi \in \mathbb {R} ^{d\times d}} and sets z = Π x {\displaystyle z=\Pi x} . Each coordinate of the rotated vector follows a shifted and scaled beta distribution, which converges to a normal distribution in high dimensions. In high dimensions, distinct coordinates also become nearly independent, allowing the algorithm to apply scalar quantizers independently to each coordinate. The scalar quantizer is constructed by solving a one-dimensional continuous k-means or Lloyd–Max quantization problem. If the centroids are c 1 , c 2 , … , c 2 b {\displaystyle c_{1},c_{2},\ldots ,c_{2^{b}}} , the quantization step stores, for each coordinate, i d x j = ⁡ a r g m i n k ∈ [ 2 b ] | z j − c k | . {\displaystyle \mathrm {idx} _{j}=\operatorname {} {arg\,min}_{k\in [2^{b}]}|z_{j}-c_{k}|.} During dequantization, the stored index for each coordinate is replaced by the corresponding centroid, giving a reconstructed rotated vector z ~ {\displaystyle {\tilde {z}}} . The algorithm then rotates back: x ~ = Π ⊤ z ~ . {\displaystyle {\tilde {x}}=\Pi ^{\top }{\tilde {z}}.} The paper gives the following bound for TurboQuantmse: D m s e ≤ 3 π 2 ⋅ 1 4 b . {\displaystyle D_{\mathrm {mse} }\leq {\frac {\sqrt {3\pi }}{2}}\cdot {\frac {1}{4^{b}}}.} It also reports finer-grained MSE values of approximately 0.36, 0.117, 0.03, and 0.009 for bit-widths b = 1 , 2 , 3 , 4 {\displaystyle b=1,2,3,4} , respectively. === TurboQuantprod === TurboQuantprod is optimized for unbiased inner-product estimation. The authors note that an MSE-optimized quantizer may introduce bias when used to estimate inner products. To address this, TurboQuantprod first applies TurboQuantmse with bit-width b − 1 {\displaystyle b-1} , then applies a one-bit Quantized Johnson–Lindenstrauss transform to the remaining residual vector. Let r = x − Q m s e − 1 ( Q m s e ( x ) ) {\displaystyle r=x-Q_{\mathrm {mse} }^{-1}(Q_{\mathrm {mse} }(x))} be the residual after MSE quantization, and let γ = ‖ r ‖ 2 {\displaystyle \gamma =\|r\|_{2}} . The QJL step stores a sign vector for the residual. For γ ≠ 0 {\displaystyle \gamma \neq 0} , this can be written using the normalized residual u = r / γ {\displaystyle u=r/\gamma } : q j l = sign ⁡ ( S u ) , {\displaystyle qjl=\operatorname {sign} (Su),} where S ∈ R d × d {\displaystyle S\in \mathbb {R} ^{d\times d}} is a random projection matrix. Since the sign function is invariant under positive rescaling, this is equivalent to sign ⁡ ( S r ) {\displaystyle \operatorname {sign} (Sr)} when r ≠ 0 {\displaystyle r\neq 0} . If γ = 0 {\displaystyle \gamma =0} , the residual correction is zero. TurboQuantprod stores the MSE quantization, the QJL sign vector, and the residual norm: Q p r o d ( x ) = [ Q m s e ( x ) , q j l , γ ] . {\displaystyle Q_{\mathrm {prod} }(x)=\left[Q_{\mathrm {mse} }(x),qjl,\gamma \right].} The dequantized vector is reconstructed as x ~ = x ~ m s e + π / 2 d γ S ⊤ q j l . {\displaystyle {\tilde {x}}={\tilde {x}}_{\mathrm {mse} }+{\frac {\sqrt {\pi /2}}{d}}\,\gamma S^{\top }qjl.} The paper proves that TurboQuantprod is unbiased for inner-product estimation: E x ~ [ ⟨ y , x ~ ⟩ ] = ⟨ y , x ⟩ . {\displaystyle \mathbb {E} _{\tilde {x}}\left[\langle y,{\tilde {x}}\rangle \right]=\langle y,x\rangle .} It also gives the distortion bound D p r o d ≤ 3 π 2 ⋅ ‖ y ‖ 2 2 d ⋅ 1 4 b . {\displaystyle D_{\mathrm {prod} }\leq {\frac {\sqrt {3\pi }}{2}}\cdot {\frac {\|y\|_{2}^{2}}{d}}\cdot {\frac {1}{4^{b}}}.} == Performance and applications == The TurboQuant paper reports that the algorithm achieves near-optimal distortion rates within a small constant factor of information-theoretic lower bounds. The authors report that, for KV cache quantization, TurboQuant achieved quality neutrality at 3.5 bits per channel and marginal degradation at 2.5 bits per channel. In long-context LLM experiments using Llama 3.1 8B Instruct, the paper evaluated the method on a "needle-in-a-haystack" retrieval task with document lengths from 4,000 to 104,000 tokens. It reported that TurboQuant matched the uncompressed full-precision baseline while using more than 4× compression, and compared the method against PolarQuant, SnapKV, PyramidKV, and KIVI. Google Research stated that TurboQuant was evaluated on long-context benchmarks including LongBench, Needle in a Haystack, ZeroSCROLLS, RULER, and L-Eval using open-source models including Gemma and Mistral. According to a report in Tom's Hardware, Google described the method as reducing KV-cache memory by at least six times and achieving up to an eightfold improvement in attention-logit computation on Nvidia H100 GPUs compared with unquantized 32-bit keys. TurboQuant has also been applied to nearest-neighbor vector search. The original paper reports experiments on DBpedia entity embeddings and GloVe embeddings, comparing TurboQuant with product quantization and other vector-search quantization baselines. == Relationship to other methods == TurboQuant is related to several methods for efficient large language model inference and high-dimensional search: Product quantization – a vector quantization technique widely used for approximate nearest-neighbor search Quantization (machine learning) – reducing the numerical precision of weights, activations, or cached tensors in machine learning models PagedAttention – a memory-management algorithm for LLM serving that reduces fragmentation in the KV cache Johnson–Lindenstrauss lemma – a result in high-dimensional geometry used in random projection methods Lloyd's algorithm – an algorithm for scalar and vector quantization, including k-means-style codebook construction Unlike PagedAttention, which focuses on memory allocation and cache layout, TurboQuant reduces the numerical storage cost of the vectors themselves. Unlike many product-quantization methods, TurboQuant is designed to be data-oblivious and online, avoiding dataset-specific codebook training. == Limitations == The strongest performance claims for TurboQuant come from the original paper and Google Research's own publication. Coverage in technology media has noted that the broader impact of the method will depend on real-world implementation details, workloads, and hardware architectures.</p> <a href="https://aizhi.co/html/239f799753.html" class="read-more" title="TurboQuant">Read more →</a> </div> </article> </li> <li class="article-item"> <article class="article-card"> <a href="https://aizhi.co/html/68b799924.html" class="card-thumb-link" title="Transaction data"><img class="card-thumb" src="https://upload.wikimedia.org/wikipedia/commons/thumb/9/9e/A_capture_of_the_%22Pixlr_E%22_workspace..png/960px-A_capture_of_the_%22Pixlr_E%22_workspace..png" alt="Transaction data" loading="lazy"></a> <div class="card-body"> <h2><a href="https://aizhi.co/html/68b799924.html" title="Transaction data">Transaction data</a></h2> <p class="article-excerpt">Transaction data or transaction information is a category of data describing transactions. Transaction data/information gather variables generally referring to reference data or master data – e.g. dates, times, time zones, currencies. Typical transactions are: Financial transactions about orders, invoices, payments; Work transactions about plans, activity records; Logistic transactions about deliveries, storage records, travel records, etc.. == Management == Recording and storing transactions is called records management. The record of the transaction is stored in a place where the retention can be guaranteed and where data is archived or removed following a retention period. Formats of recorded transactions can be digital data in databases and spreadsheets, or handwritten texts in physical documents like former bankbooks. Transaction processing systems are application software that generate transactions and manage transaction data/information, e.g. SAP and Oracle Financials. == Data warehousing == Transaction data can be summarised in a data warehouse, which helps accessibility and analysis of the data.</p> <a href="https://aizhi.co/html/68b799924.html" class="read-more" title="Transaction data">Read more →</a> </div> </article> </li> <li class="article-item"> <article class="article-card"> <a href="https://aizhi.co/html/96d799896.html" class="card-thumb-link" title="Schema crosswalk"><img class="card-thumb" src="https://upload.wikimedia.org/wikipedia/commons/thumb/c/c1/Fourier_Slice_Theorem.png/960px-Fourier_Slice_Theorem.png" alt="Schema crosswalk" loading="lazy"></a> <div class="card-body"> <h2><a href="https://aizhi.co/html/96d799896.html" title="Schema crosswalk">Schema crosswalk</a></h2> <p class="article-excerpt">A schema crosswalk is a table that shows equivalent elements (or "fields") in more than one database schema. It maps the elements in one schema to the equivalent elements in another. Crosswalk tables are often employed within or in parallel to enterprise systems, especially when multiple systems are interfaced or when the system includes legacy system data. In the context of Interfaces, they function as an internal extract, transform, load (ETL) mechanism. For example, this is a metadata crosswalk from MARC standards to Dublin Core: Crosswalks show people where to put the data from one scheme into a different scheme. They are often used by libraries, archives, museums, and other cultural institutions to translate data to or from MARC standards, Dublin Core, Text Encoding Initiative (TEI), and other metadata schemes. For example, an archive has a MARC record in its catalog describing a manuscript. Suppose the archive makes a digital copy of that manuscript and wants to display it on the web along with the information from the catalog. In that case, it will have to translate the data from the MARC catalog record into a different format, such as Metadata Object Description Schema, that is viewable on a webpage. Because MARC has various fields than MODS, decisions must be made about where to put the data into MODS. This type of "translating" from one format to another is often called "metadata mapping" or "field mapping," and is related to "data mapping", and "semantic mapping". Crosswalks also have several technical capabilities. They help databases using different metadata schemes to share information. They help metadata harvesters create union catalogs. They enable search engines to search multiple databases simultaneously with a single query. == Challenges for crosswalks == One of the biggest challenges for crosswalks is that no two metadata schemes are 100% equivalent. One scheme may have a field that doesn't exist in another scheme or a field that is split into two different fields in another scheme; this is why data is often lost when mapping from a complex scheme to a simpler one. For example, when mapping from MARC to Simple Dublin Core, the distinction between types of titles is lost: Simple Dublin Core only has one "Title" element, so all of the different types of MARC titles get lumped together without further distinctions. A future attempt to convert the metadata back into MARC would enter the information in the basic MARC 245 Title Statement field, with none of the original distinctions. This is why crosswalks are said to be "lateral" (one-way) mappings from one scheme to another. Separate crosswalks would be required to map from scheme A to scheme B and from scheme B to scheme A. === Difficulties in mapping === Other mapping problems arise when: One scheme has one element that needs to be split up with different parts of it placed in multiple other elements in the second scheme ("one-to-many" mapping) One scheme allows an element to be repeated more than once while another only allows that element to appear once with multiple terms in it Schemes have different data formats (e.g. John Doe or Doe, John) An element in one scheme is indexed, but the equivalent element in the other scheme is not Schemes may use different controlled vocabularies Schemes change their standards over time Some of these problems are not fixable. As Karen Coyle says in "Crosswalking Citation Metadata: The University of California's Experience," "The more metadata experience we have, the more it becomes clear that metadata perfection is not attainable, and anyone who attempts it will be sorely disappointed. When metadata is crosswalked between two or more unrelated sources, there will be data elements that cannot be reconciled in an ideal manner. The key to a successful metadata crosswalk is intelligent flexibility. It is essential to focus on the important goals and be willing to compromise to reach a practical conclusion to projects."</p> <a href="https://aizhi.co/html/96d799896.html" class="read-more" title="Schema crosswalk">Read more →</a> </div> </article> </li> <li class="article-item"> <article class="article-card"> <a href="https://aizhi.co/html/08f399988.html" class="card-thumb-link" title="GeneRIF"><img class="card-thumb" src="https://upload.wikimedia.org/wikipedia/commons/thumb/2/28/Video_frames_of_the_Parallel_Bars_action_category.png/960px-Video_frames_of_the_Parallel_Bars_action_category.png" alt="GeneRIF" loading="lazy"></a> <div class="card-body"> <h2><a href="https://aizhi.co/html/08f399988.html" title="GeneRIF">GeneRIF</a></h2> <p class="article-excerpt">A GeneRIF or Gene Reference Into Function is a short (255 characters or fewer) statement about the function of a gene. GeneRIFs provide a simple mechanism for allowing scientists to add to the functional annotation of genes described in the Entrez Gene database. In practice, function is constructed quite broadly. For example, there are GeneRIFs that discuss the role of a gene in a disease, GeneRIFs that point the viewer towards a review article about the gene, and GeneRIFs that discuss the structure of a gene. However, the stated intent is for GeneRIFs to be about gene function. Currently over half a million geneRIFs have been created for genes from almost 1000 different species. GeneRIFs are always associated with specific entries in the Entrez Gene database. Each GeneRIF has a pointer to the PubMed ID (a type of document identifier) of a scientific publication that provides evidence for the statement made by the GeneRIF. GeneRIFs are often extracted directly from the document that is identified by the PubMed ID, very frequently from its title or from its final sentence. GeneRIFs are usually produced by NCBI indexers, but anyone may submit a GeneRIF. To be processed, a valid Gene ID must exist for the specific gene, or the Gene staff must have assigned an overall Gene ID to the species. The latter case is implemented via records in Gene with the symbol NEWENTRY. Once the Gene ID is identified, only three types of information are required to complete a submission: a concise phrase describing a function or functions (less than 255 characters in length, preferably more than a restatement of the title of the paper); a published paper describing that function, implemented by supplying the PubMed ID of a citation in PubMed; a valid e-mail address (which will remain confidential). == Example == Here are some GeneRIFs taken from Entrez Gene for GeneID 7157, the human gene TP53. The PubMed document identifiers have been omitted from the examples. Note the wide variability with respect to the presence or absence of punctuation and of sentence-initial capital letters. p53 and c-erbB-2 may have independent role in carcinogenesis of gall bladder cancer Degradation of endogenous HIPK2 depends on the presence of a functional p53 protein. p53 codon 72 alleles influence the response to anticancer drugs in cells from aged people by regulating the cell cycle inhibitor p21WAF1 Logistic regression analysis showed p53 and COX-2 as dependent predictors in pancreatic carcinogenesis, and a reciprocal relationship to neoplastic progression between p53 and COX-2. GeneRIFs are an unusual type of textual genre, and they have recently been the subject of a number of articles from the natural language processing community.</p> <a href="https://aizhi.co/html/08f399988.html" class="read-more" title="GeneRIF">Read more →</a> </div> </article> </li> <li class="article-item"> <article class="article-card"> <a href="https://aizhi.co/html/374b799618.html" class="card-thumb-link" title="Irish logarithm"><img class="card-thumb" src="https://upload.wikimedia.org/wikipedia/commons/thumb/1/10/Dhammin_Logo_-_Transparent.png/960px-Dhammin_Logo_-_Transparent.png" alt="Irish logarithm" loading="lazy"></a> <div class="card-body"> <h2><a href="https://aizhi.co/html/374b799618.html" title="Irish logarithm">Irish logarithm</a></h2> <p class="article-excerpt">The Irish logarithm was a system of number manipulation invented by Percy Ludgate for machine multiplication. The system used a combination of mechanical cams as lookup tables and mechanical addition to sum pseudo-logarithmic indices to produce partial products, which were then added to produce results. The technique is similar to Zech logarithms (also known as Jacobi logarithms), but uses a system of indices original to Ludgate. == Concept == Ludgate's algorithm compresses the multiplication of two single decimal numbers into two table lookups (to convert the digits into indices), the addition of the two indices to create a new index which is input to a second lookup table that generates the output product. Because both lookup tables are one-dimensional, and the addition of linear movements is simple to implement mechanically, this allows a less complex mechanism than would be needed to implement a two-dimensional 10×10 multiplication lookup table. Ludgate stated that he deliberately chose the values in his tables to be as small as he could make them; given this, Ludgate's tables can be simply constructed from first principles, either via pen-and-paper methods, or a systematic search using only a few tens of lines of program code. They do not correspond to either Zech logarithms, Remak indexes or Korn indexes. == Pseudocode == The following is an implementation of Ludgate's Irish logarithm algorithm in the Python programming language: Table 1 is taken from Ludgate's original paper; given the first table, the contents of Table 2 can be trivially derived from Table 1 and the definition of the algorithm. Note since that the last third of the second table is entirely zeros, this could be exploited to further simplify a mechanical implementation of the algorithm.</p> <a href="https://aizhi.co/html/374b799618.html" class="read-more" title="Irish logarithm">Read more →</a> </div> </article> </li> <li class="article-item"> <article class="article-card"> <a href="https://aizhi.co/html/61d799931.html" class="card-thumb-link" title="SQL programming tool"><img class="card-thumb" src="https://upload.wikimedia.org/wikipedia/commons/thumb/e/ee/Flock_of_birds_at_Rome.ogv/500px--Flock_of_birds_at_Rome.ogv.jpg" alt="SQL programming tool" loading="lazy"></a> <div class="card-body"> <h2><a href="https://aizhi.co/html/61d799931.html" title="SQL programming tool">SQL programming tool</a></h2> <p class="article-excerpt">In the field of software, SQL programming tools provide platforms for database administrators (DBAs) and application developers to perform daily tasks efficiently and accurately. Database administrators and application developers often face constantly changing environments which they rarely completely control. Many changes result from new development projects or from modifications to existing code, which, when deployed to production, do not always produce the expected result. For organizations to better manage development projects and the teams that develop code, suppliers of SQL programming tools normally provide more than facility to the database administrator or application developer to aid in database management and in quality code-deployment practices. == Features == SQL programming tools may include the following features: === SQL editing === SQL editors allow users to edit and execute SQL statements. They may support the following features: cut, copy, paste, undo, redo, find (and replace), bookmarks block indent, print, save file, uppercase/lowercase keyword highlighting auto-completion access to frequently used files output of query result editing query-results committing and rolling-back transactions inside cut paper === Object browsing === Tools may display information about database objects relevant to developers or to database administrators. Users may: view object descriptions view object definitions (DDL) create database objects enable and disable triggers and constraints recompile valid or invalid objects query or edit tables and views Some tools also provide features to display dependencies among objects, and allow users to expand these dependent objects recursively (for example: packages may reference views, views generally reference tables, super/subtypes, and so on). === Session browsing === Database administrators and application developers can use session browsing tools to view the current activities of each user in the database. They can check the resource-usage of individual users, statistics information, locked objects and the current running SQL of each individual session. === User-security management === DBAs can create, edit, delete, disable or enable user-accounts in the database using security-management tools. DBAs can also assign roles, system privileges, object privileges, and storage-quotas to users. === Debugging === Some tools offer features for the debugging of stored procedures: step in, step over, step out, run until exception, breakpoints, view & set variables, view call stack, and so on. Users can debug any program-unit without making any modification to it, including triggers and object types. === Performance monitoring === Monitoring tools may show the database resources — usage summary, service time summary, recent activities, top sessions, session history or top SQL — in easy-to-read graphs. Database administrators can easily monitor the health of various components in the monitoring instance. Application developers may also make use of such tools to diagnose and correct application-performance problems as well as improve SQL server performance. === Test data === Test data generation tools can populate the database by realistic test data for server or client side testing purposes. Also, this kind of software can upload sample blob files to database.</p> <a href="https://aizhi.co/html/61d799931.html" class="read-more" title="SQL programming tool">Read more →</a> </div> </article> </li> <li class="article-item"> <article class="article-card"> <a href="https://aizhi.co/html/410a799582.html" class="card-thumb-link" title="Document"><img class="card-thumb" src="https://upload.wikimedia.org/wikipedia/commons/b/b1/Svm_8_polinomial.JPG" alt="Document" loading="lazy"></a> <div class="card-body"> <h2><a href="https://aizhi.co/html/410a799582.html" title="Document">Document</a></h2> <p class="article-excerpt">A document is a written, drawn, presented, or memorialized representation of thought, often the manifestation of non-fictional, as well as fictional, content. The etymology of the word "document" derives from the Latin documentum, which denotes a "teaching" or "lesson": the verb doceō denotes "to teach". Historically, the term "document" was usually used to indicate written proof useful as evidence of a truth or fact. In the Computer Age, the term "document" typically refers to a primarily textual computer file, encompassing its structural and format elements, such as fonts, colors, and images. In the contemporary era, the definition of "document" has expanded beyond its traditional medium, such as paper, to encompass electronic documents as well. History, events, examples, opinions, stories, and creativity can all be expressed in documents. "Documentation" is distinct because it has more denotations than "document". Documents are also distinguished from "realia", which are three-dimensional objects that would otherwise satisfy the definition of "document" because they memorialize or represent thought. Documents are usually considered to be two-dimensional representations. == Abstract definitions == The concept of "document" has been defined by Suzanne Briet as "any concrete or symbolic indication, preserved or recorded, for reconstructing or for proving a phenomenon, whether physical or mental." An often-cited article concludes that "the evolving notion of document" among Jonathan Priest, Paul Otlet, Briet, Walter Schürmeyer, and the other documentalists increasingly emphasized whatever functioned as a document rather than traditional physical forms of documents. The shift to digital technology would seem to make this distinction even more important. David M. Levy has said that an emphasis on the technology of digital documents has impeded our understanding of digital documents as documents. A conventional document, such as a mail message or a technical report, exists physically in digital technology as a string of bits, as does everything else in a digital environment. As an object of study, it has been made into a document. It has become physical evidence by those who study it. "Document" is defined in library and information science and documentation science as a fundamental, abstract idea: the word denotes everything that may be represented or memorialized to serve as evidence. The classic example provided by Briet is an antelope: "An antelope running wild on the plains of Africa should not be considered a document[;] she rules. But if it were to be captured, taken to a zoo and made an object of study, it has been made into a document. It has become physical evidence being used by those who study it. Indeed, scholarly articles written about the antelope are secondary documents, since the antelope itself is the primary document." This opinion has been interpreted as an early expression of actor–network theory. == Kinds == A document can be structured, like tabular documents, lists, forms, or scientific charts, semi-structured like a book or a newspaper article, or unstructured like a handwritten note. Documents are sometimes classified as secret, private, or public. They may also be described as drafts or proofs. When a document is copied, the source is denominated the "original". Documents are used in numerous fields, e.g.: Academia: manuscript, thesis, paper, journal, chart, and technical drawing Media: mock-up, script, image, photography, and newspaper article Administration, law, and politics: application, brief, certificate, commission, constitutional document, form, gazette, identity document, license, manifesto, summons, census, and white paper Business: invoice, request for proposal, proposal, contract, packing slip, manifest, report (detailed and summary), spreadsheet, material safety data sheet, waybill, bill of lading, financial statement, nondisclosure agreement (NDA), mutual nondisclosure agreement, and user guide Geography and planning: topographic map, cadastre, legend, and architectural plan Such standard documents can be drafted based on a template. == Drafting == The page layout of a document is how information is graphically arranged in the space of the document, e.g., on a page. If the appearance of the document is of concern, the page layout is generally the responsibility of a graphic designer. Typography concerns the design of letter and symbol forms and their physical arrangement in the document (see typesetting). Information design concerns the effective communication of information, especially in industrial documents and public signs. Simple textual documents may not require visual design and may be drafted only by an author, clerk, or transcriber. Forms may require a visual design for their initial fields, but not to complete the forms. == Media == Traditionally, the medium of a document was paper and the information was applied to it in ink, either by handwriting (to make a manuscript) or by a mechanical process (e.g., a printing press or laser printer). Today, some short documents also may consist of sheets of paper stapled together. Historically, documents were inscribed with ink on papyrus (starting in ancient Egypt) or parchment; scratched as runes or carved on stone using a sharp tool, e.g., the Tablets of Stone described in the Bible; stamped or incised in clay and then baked to make clay tablets, e.g., in the Sumerian and other Mesopotamian civilizations. The papyrus or parchment was often rolled into a scroll or cut into sheets and bound into a codex (book). Contemporary electronic means of memorializing and displaying documents include: Monitor of a desktop computer, laptop, tablet; optionally with a printer to produce a hard copy; Personal digital assistant; Dedicated e-book device; Electronic paper, typically, using the Portable Document Format (PDF); Information appliance; Digital audio player; and Radio and television service provider. Digital documents usually require a specific file format to be presentable in a specific medium. == In law == Documents in all forms frequently serve as material evidence in criminal and civil proceedings. The forensic analysis of such a document is within the scope of questioned document examination. To catalog and manage the large number of documents that may be produced during litigation, Bates numbering is often applied to all documents in the lawsuit so that each document has a unique, arbitrary, identification number.</p> <a href="https://aizhi.co/html/410a799582.html" class="read-more" title="Document">Read more →</a> </div> </article> </li> <li class="article-item"> <article class="article-card"> <a href="https://aizhi.co/html/92d299905.html" class="card-thumb-link" title="Flektor"><img class="card-thumb" src="https://upload.wikimedia.org/wikipedia/commons/d/dc/ConEmu_icon.png" alt="Flektor" loading="lazy"></a> <div class="card-body"> <h2><a href="https://aizhi.co/html/92d299905.html" title="Flektor">Flektor</a></h2> <p class="article-excerpt">Flektor was a web application that allowed users the ability to create and "mashup" their own content (photos, videos, music, etc.) and share it via email, on social networking websites MySpace, Facebook, Blogger, Digg, eBay or on personal blogs. The company's website (Flektor.com) launched on April 2, 2007, and over 40,000 people began utilizing its features just one month later. Flektor closed down in January 2009. Flektor offered tools and widgets that included audio, video, photos, text, and approximately 100 effects, transitions and filters to be used with media. Users could create personalized slideshows, polls, postcards, and streaming video projects which the website calls "fleks". Flektor also offered Chat (used as a MySpace addon) and Movie Editor, which provided the ability to edit content and assets together. Users of Flektor could import media from websites like Photobucket and Google's YouTube, and then edit their content with the site's editing tools. Flektor's erstwhile competitors include Slide.com (founded by PayPal co-founder Max Levchin), RockYou!, Yahoo's JumpCut and Brightcove. == History == Flektor was created by Jason Rubin, Andy Gavin and former HBO executive Jason R. Kay. Both Rubin and Gavin spent most of their careers in the video game industry developing games for publishers like Electronic Arts, Universal Interactive Studios and Sony Computer Entertainment America. They founded a successful game development studio called Naughty Dog and were responsible for games such as Crash Bandicoot and Jak and Daxter. After selling Naughty Dog to Sony, Rubin focused on a comic book series called Iron and the Maiden before teaming up again with Gavin to venture into the web industry with Flektor. Jason Kay spent four years at Home Box Office, working as a consultant to the EVP of Business Development. They recruited former employee and then Naughty Dog Lead Programmer Scott Shumaker to lead the technology team along with Gavin. Ryan Evans joined shortly thereafter, spearheading product development. Flektor is based in Culver City, California. In May 2007, the company was sold to Fox Interactive Media, which is a division of News Corp., for more than $20 million. The deal coincided with Fox's acquisition of Photobucket, an image-hosting and sharing website. Fox Interactive Media already holds possession of MySpace, IGN Entertainment, FOXSports.com, AmericanIdol.com and Rotten Tomatoes. After the acquisition, Rubin, Gavin and Kay departed, leaving the studio in the hands of Shumaker and Evans. In the fall of 2007, Flektor partnered with its sister company, MySpace, and MTV to provide instant audience feedback via polls for the interactive MySpace/ MTV Presidential Dialogues series with presidential candidates Senator Barack Obama, Senator John McCain and John Edwards. Use of Flektor's polling system, enabled hosts John McLaughlin and Geoffrey Garin to cater their questions towards subjects of voter-interest. In the fall of 2008, Flektor built the official site for the 2008 Presidential debates, hosted at MyDebates. In January 2009, due to a company directive to focus on the core MySpace property, Fox Interactive announced that Flektor would be shut down, with some of its technology being incorporated into MySpace.</p> <a href="https://aizhi.co/html/92d299905.html" class="read-more" title="Flektor">Read more →</a> </div> </article> </li> <li class="article-item"> <article class="article-card"> <a href="https://aizhi.co/html/30b799962.html" class="card-thumb-link" title="Mobile content management system"><img class="card-thumb" src="https://upload.wikimedia.org/wikipedia/commons/thumb/7/72/Association_for_Computational_Linguistics_logo.svg/960px-Association_for_Computational_Linguistics_logo.svg.png" alt="Mobile content management system" loading="lazy"></a> <div class="card-body"> <h2><a href="https://aizhi.co/html/30b799962.html" title="Mobile content management system">Mobile content management system</a></h2> <p class="article-excerpt">A mobile content management system (MCMs) is a type of content management system (CMS) capable of storing and delivering content and services to mobile devices, such as mobile phones, smart phones, and PDAs. Mobile content management systems may be discrete systems, or may exist as features, modules or add-ons of larger content management systems capable of multi-channel content delivery. Mobile content delivery has unique, specific constraints including widely variable device capacities, small screen size, limitations on wireless bandwidth, sometimes small storage capacity, and (for some devices) comparatively weak device processors. Demand for mobile content management increased as mobile devices became increasingly ubiquitous and sophisticated. MCMS technology initially focused on the business to consumer (B2C) mobile market place with ringtones, games, text-messaging, news, and other related content. Since, mobile content management systems have also taken root in business-to-business (B2B) and business-to-employee (B2E) situations, allowing companies to provide more timely information and functionality to business partners and mobile workforces in an increasingly efficient manner. A 2008 estimate put global revenue for mobile content management at US$8 billion. == Key features == === Multi-channel content delivery === Multi-channel content delivery capabilities allow users not to manage a central content repository while simultaneously delivering that content to mobile devices such as mobile phones, smartphones, tablets and other mobile devices. Content can be stored in a raw format (such as Microsoft Word, Excel, PowerPoint, PDF, Text, HTML etc.) to which device-specific presentation styles can be applied. === Content access control === Access control includes authorization, authentication, access approval to each content. In many cases the access control also includes download control, wipe-out for specific user, time specific access. For the authentication, MCM shall have basic authentication which has user ID and password. For higher security many MCM supports IP authentication and mobile device authentication. === Specialized templating system === While traditional web content management systems handle templates for only a handful of web browsers, mobile CMS templates must be adapted to the very wide range of target devices with different capacities and limitations. There are two approaches to adapting templates: multi-client and multi-site. The multi-client approach makes it possible to see all versions of a site at the same domain (e.g. sitename.com), and templates are presented based on the device client used for viewing. The multi-site approach displays the mobile site on a targeted sub-domain (e.g. mobile.sitename.com). === Location-based content delivery === Location-based content delivery provides targeted content, such as information, advertisements, maps, directions, and news, to mobile devices based on current physical location. Currently, GPS (global positioning system) navigation systems offer the most popular location-based services. Navigation systems are specialized systems, but incorporating mobile phone functionality makes greater exploitation of location-aware content delivery possible.</p> <a href="https://aizhi.co/html/30b799962.html" class="read-more" title="Mobile content management system">Read more →</a> </div> </article> </li> <li class="article-item"> <article class="article-card"> <a href="https://aizhi.co/html/76f799916.html" class="card-thumb-link" title="SQL/PSM"><img class="card-thumb" src="https://upload.wikimedia.org/wikipedia/commons/thumb/0/03/Customer_cleared_to_board_flight_%2846092017161%29.jpg/960px-Customer_cleared_to_board_flight_%2846092017161%29.jpg" alt="SQL/PSM" loading="lazy"></a> <div class="card-body"> <h2><a href="https://aizhi.co/html/76f799916.html" title="SQL/PSM">SQL/PSM</a></h2> <p class="article-excerpt">SQL/PSM (SQL/Persistent Stored Modules) is an ISO standard mainly defining an extension of SQL with a procedural language for use in stored procedures. Initially published in 1996 as an extension of SQL-92 (ISO/IEC 9075-4:1996, a version sometimes called PSM-96 or even SQL-92/PSM), SQL/PSM was later incorporated into the multi-part SQL:1999 standard, and has been part 4 of that standard since then, most recently in SQL:2023. The SQL:1999 part 4 covered less than the original PSM-96 because the SQL statements for defining, managing, and invoking routines were actually incorporated into part 2 SQL/Foundation, leaving only the procedural language itself as SQL/PSM. The SQL/PSM facilities are still optional as far as the SQL standard is concerned; most of them are grouped in Features P001-P008. SQL/PSM standardizes syntax and semantics for control flow, exception handling (called "condition handling" in SQL/PSM), local variables, assignment of expressions to variables and parameters, and (procedural) use of cursors. It also defines an information schema (metadata) for stored procedures. SQL/PSM is one language in which methods for the SQL:1999 structured types can be defined. The other is Java, via SQL/JRT. SQL/PSM is derived, seemingly directly, from Oracle's PL/SQL. Oracle developed PL/SQL and released it in 1991, basing the language on the US Department of Defense's Ada programming language. However, Oracle has maintained a distance from the standard in its documentation. IBM's SQL PL (used in DB2) and Mimer SQL's PSM were the first two products officially implementing SQL/PSM. It is commonly thought that these two languages, and perhaps also MySQL/MariaDB's procedural language, are closest to the SQL/PSM standard. However, a PostgreSQL addon implements SQL/PSM (alongside its other procedural languages like the PL/SQL-derived plpgsql), although it is not part of the core product. RDF functionality in OpenLink Virtuoso was developed entirely through SQL/PSM, combined with custom datatypes (e.g., ANY for handling URI and Literal relation objects), sophisticated indexing, and flexible physical storage choices (column-wise or row-wise).</p> <a href="https://aizhi.co/html/76f799916.html" class="read-more" title="SQL/PSM">Read more →</a> </div> </article> </li> </ul> <nav class="pagination" aria-label="Pagination"> <a href="https://aizhi.co/aicodeui/24/" class="page-num">1</a><a href="https://aizhi.co/aicodeui/25/" class="page-num">2</a><a href="https://aizhi.co/aicodeui/26/" class="page-num">3</a><a href="https://aizhi.co/aicodeui/27/" class="page-num">4</a><a href="https://aizhi.co/aicodeui/28/" class="page-num">5</a><a href="https://aizhi.co/aicodeui/29/" class="page-num">6</a><a href="https://aizhi.co/aicodeui/30/" class="page-num">7</a><a href="https://aizhi.co/aicodeui/31/" class="page-num">8</a><a href="https://aizhi.co/aicodeui/32/" class="page-num">9</a><a href="https://aizhi.co/aicodeui/33/" class="page-num">10</a> </nav> </main> <aside class="sidebar"> <section class="sidebar-section"> <h2>All Categories</h2> <ul> <li><a href="https://aizhi.co/ainewsandguides/">AI News and Guides</a></li><li><a href="https://aizhi.co/aiforbusiness/">AI for Business</a></li><li><a href="https://aizhi.co/aiwritingtools/">AI Writing Tools</a></li><li><a href="https://aizhi.co/aiimagegenerators/">AI Image Generators</a></li><li><a href="https://aizhi.co/aivideotools/">AI Video Tools</a></li><li><a href="https://aizhi.co/aicodingtools/">AI Coding Tools</a></li><li><a href="https://aizhi.co/aichatbotsandassistants/">AI Chatbots and Assistants</a></li> </ul> </section> <section class="sidebar-section"> <h2>Trending Guides</h2> <ul> <li><a href="https://aizhi.co/html/456d499539.html" title="Histogram of oriented displacements">Histogram of oriented displacements</a></li><li><a href="https://aizhi.co/html/217e799775.html" title="OpenSMILE">OpenSMILE</a></li><li><a href="https://aizhi.co/html/222a799770.html" title="Artificial intelligence in Brazilian industry">Artificial intelligence in Brazilian industry</a></li><li><a href="https://aizhi.co/html/86a799906.html" title="SIGMOD Edgar F. Codd Innovations Award">SIGMOD Edgar F. Codd Innovations Award</a></li><li><a href="https://aizhi.co/html/06f499989.html" title="Biohybrid system">Biohybrid system</a></li><li><a href="https://aizhi.co/html/377f799615.html" title="Knuth–Plass line-breaking algorithm">Knuth–Plass line-breaking algorithm</a></li><li><a href="https://aizhi.co/html/340d799652.html" title="Systematic review">Systematic review</a></li><li><a href="https://aizhi.co/html/487d799505.html" title="Information strategist">Information strategist</a></li><li><a href="https://aizhi.co/html/393c399603.html" title="Neural processing unit">Neural processing unit</a></li><li><a href="https://aizhi.co/html/219f799773.html" title="Emotion recognition">Emotion recognition</a></li> </ul> </section> </aside> </div> </div> </div> <footer class="site-footer"> <div class="container"> <div class="footer-cols"> <div class="footer-col footer-about"> <a class="brand" href="https://aizhi.co/" aria-label="Aizhi"> <span class="brand-mark" aria-hidden="true">✦</span> <span class="brand-text">Aizhi</span> </a> <p class="footer-tagline">Hand-picked AI tools, generators and practical how-to guides — independent reviews, updated for 2026.</p> </div> <nav class="footer-col" aria-label="Categories"> <h2 class="footer-h">Categories</h2> <ul> <li><a href="https://aizhi.co/aichatbotsandassistants/">AI Chatbots and Assistants</a></li><li><a href="https://aizhi.co/aiwritingtools/">AI Writing Tools</a></li><li><a href="https://aizhi.co/aiforbusiness/">AI for Business</a></li><li><a href="https://aizhi.co/ainewsandguides/">AI News and Guides</a></li><li><a href="https://aizhi.co/aicodingtools/">AI Coding Tools</a></li><li><a href="https://aizhi.co/aivideotools/">AI Video Tools</a></li><li><a href="https://aizhi.co/aiimagegenerators/">AI Image Generators</a></li> </ul> </nav> <nav class="footer-col" aria-label="Site"> <h2 class="footer-h">Site</h2> <ul> <li><a href="https://aizhi.co/">Home</a></li> <li><a href="/sitemap.xml">XML Sitemap</a></li> </ul> </nav> </div> <div class="partner-links" aria-label="Network"> </div> <p class="footer-copy"> © Aizhi. All rights reserved. </p> </div> </footer> </body> </html>