AI Coding Godot

AI Coding Godot — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

• 

  Computer appliance

  A computer appliance is a computer system with a combination of hardware, software, or firmware that is specifically designed to provide a particular computing resource. Such devices became known as appliances because of the similarity in role or management to a home appliance, which are generally closed and sealed, and are not serviceable by the user or owner. The hardware and software are delivered as an integrated product and may even be pre-configured before delivery to a customer, to provide a turn-key solution for a particular application. Unlike general purpose computers, appliances are generally not designed to allow the customers to change the software and the underlying operating system, or to flexibly reconfigure the hardware. Another form of appliance is the virtual appliance, which has similar functionality to a dedicated hardware appliance, but is distributed as a software virtual machine image for a hypervisor-equipped device. == Overview == Traditionally, software applications run on top of a general-purpose operating system, which uses the hardware resources of the computer (primarily memory, disk storage, processing power, and networking bandwidth) to meet the computing needs of the user. The main issue with the traditional model is related to complexity. It is complex to integrate the operating system and applications with a hardware platform, and complex to support it afterwards. By tightly constraining the variations of the hardware and software, the appliance becomes easily deployable, and can be used without nearly as wide (or deep) IT knowledge. Additionally, when problems and errors appear, the supporting staff very rarely needs to explore them deeply to understand the matter thoroughly. The staff needs merely training on the appliance management software to be able to resolve most of problems. In all forms of the computer appliance model, customers benefit from easy operations. The appliance has exactly one combination of hardware and operating system and application software, which has been pre-installed at the factory. This prevents customers from needing to perform complex integration work, and dramatically simplifies troubleshooting. In fact, this "turnkey operation" characteristic is the driving benefit that customers seek when purchasing appliances. To be considered an appliance, the (hardware) device needs to be integrated with software, and both are supplied as a package. This distinguishes appliances from "home grown" solutions, or solutions requiring complex implementations by integrators or value-added resellers (VARs). The appliance approach helps to decouple the various systems and applications, for example in the data center. Once a resource is decoupled, in theory it can be also centralized to become shared among many systems, centrally managed and optimized, all without requiring changes to any other system. == Tradeoffs of the computer appliance approach == The major disadvantage of deploying a computer appliance is that since they are designed to supply a specific resource, they most often include a customized operating system running over specialized hardware, neither of which are likely to be compatible with the other systems previously deployed. Customers lose flexibility. One may believe that a proprietary embedded operating system, or operating system within an application, can make the appliance much more secure from common cyber attacks. However, the opposite is true. Security by obscurity is a poor security decision, and appliances are often plagued by security issues as evidenced by the proliferation of IoT devices. == Types of appliances == The variety of computer appliances reflects the wide range of computing resources they provide to applications. Some examples: Storage appliances provide large amounts of storage, often available to many machines on the network. See Network-attached storage and Storage area network. Network appliances are general purpose routers which may also provide firewall protection, Transport Layer Security (TLS), messaging, access to specialized networking protocols (like the ebXML Message Service) and bandwidth multiplexing for the multiple systems they front-end. Backup and disaster recovery appliances computer appliances that are integrated backup software and backup targets, sometimes with hypervisors to support local DR of protected servers. They are often a gateway to a full DRaaS solution. Firewall and Security appliances Dedicated network appliances that are designed to protect computer networks from unwanted traffic. IIoT and MES Gateway appliances Computer appliances that are designed to translate data bidirectionally between control systems and enterprise systems. Proprietary, embedded, firmware applications running on the appliance use point-to-point connections to translate data between field devices in their native automation protocols and MES systems through their APIs, ODBC, or RESTful interfaces. Anti-spam appliances for e-mail spam Software appliances A single application server appliance, with just enough operating system (JeOS) for it to run. Virtual machine appliances consist of a "hypervisor style" embedded operating system running on appliance hardware. The hypervisor layer is matched to the hardware of the appliance, and cannot be varied by the customer, but the customer may load other operating systems and applications onto the appliance in the form of virtual machines. == Consumer appliances == Aside from its deployment within data centers, many computer appliances are directly used by the general public. These include: Digital video recorder Residential gateway Network-attached storage (NAS) Video game console Consumer uses stress the need for an appliance to have easy installation, configuration, and operation, with little or no technical knowledge being necessary. == Appliances in industrial automation == The world of industrial automation has been rich in appliances. These appliances have been hardened to withstand temperature and vibration extremes. These appliances are also highly configurable, enabling customization to meet a wide variety of applications. The key benefits of an appliance in automation are: Reduced downtime - a failed appliance is typically replaced with a COTS replacement and its task is quickly and easily reloaded from a backup. Highly scalable - appliances are typically targeted solutions for an area of a plant or process. As the requirements change, scalability is achieved through the installation of another appliance. Automation concepts are easily replicated throughout the enterprise by standardizing on appliances to perform the needed tasks, as opposed to the development of custom automation schemes for each task. Low TCO (total cost of ownership) - appliances are developed, tested and supported by automation product vendors and undergo a much broader level of quality testing than custom designed automation solutions. The use of appliances in automation reduce the level of testing needed in each individual application. Reduced design time - appliances perform specific functions and although they are highly configurable, they are typically self documenting. This enables appliance based solutions to be transferred from engineer to engineer with minimal need for training and documentation. Types of automation appliances: PLC (programmable logic controller) - Programmable logic controllers are appliances that are typically used for discrete control and offer a wide range of Input and Output options. They are configured through standardized programming languages such as IEC-1131. PID (proportional–integral–derivative controller) - PID controllers are appliances that monitor a process variable and, based on an error term, effect change on a control output (manipulated variable) to drive the process variable to a setpoint. PAC (programmable automation controller) - Programmable automation controllers are appliances that embody properties of both PLCs and PID controllers enabling the integration of both analog and discrete control. Universal gateway - A universal gateway appliance has the ability to communicate with a variety of devices through their respective communication protocols, and will affect data transactions between them. This in increasingly important as manufacturing strives to improve agility, quality, production rates, production costs and reduce downtime through enhanced M2M (machine to machine) communications. EATMs (Enterprise Appliance Transaction Modules) - Enterprise appliance transaction modules are appliances that affect data transactions from plant floor automation systems to enterprise business systems. They communicate to plant floor equipment through various vendor automation protocols, and communicate to business systems through database communication protocols such as JMS (Java Message Service) and SQL (Structured Query Language). == Internal structure == There are several

  Read more →
• 

  Charge based boundary element fast multipole method

  The charge-based formulation of the boundary element method (BEM) is a dimensionality reduction numerical technique that is used to model quasistatic electromagnetic phenomena in highly complex conducting media (targeting, e.g., the human brain) with a very large (up to approximately 1 billion) number of unknowns. The charge-based BEM solves an integral equation of the potential theory written in terms of the induced surface charge density. This formulation is naturally combined with fast multipole method (FMM) acceleration, and the entire method is known as charge-based BEM-FMM. The combination of BEM and FMM is a common technique in different areas of computational electromagnetics and, in the context of bioelectromagnetism, it provides improvements over the finite element method. == Historical development == Along with more common electric potential-based BEM, the quasistatic charge-based BEM, derived in terms of the single-layer (charge) density, for a single-compartment medium has been known in the potential theory since the beginning of the 20th century. For multi-compartment conducting media, the surface charge density formulation first appeared in discretized form (for faceted interfaces) in the 1964 paper by Gelernter and Swihart. A subsequent continuous form, including time-dependent and dielectric effects, appeared in the 1967 paper by Barnard, Duck, and Lynn. The charge-based BEM has also been formulated for conducting, dielectric, and magnetic media, and used in different applications. In 2009, Greengard et al. successfully applied the charge-based BEM with fast multipole acceleration to molecular electrostatics of dielectrics. A similar approach to realistic modeling of the human brain with multiple conducting compartments was first described by Makarov et al. in 2018. Along with this, the BEM-based multilevel fast multipole method has been widely used in radar and antenna studies at microwave frequencies as well as in acoustics. == Physical background - surface charges in biological media == The charge-based BEM is based on the concept of an impressed (or primary) electric field E i {\displaystyle \mathbf {E} ^{i}} and a secondary electric field E s {\displaystyle \mathbf {E} ^{s}} . The impressed field is usually known a priori or is trivial to find. For the human brain, the impressed electric field can be classified as one of the following: A conservative field E i {\displaystyle \mathbf {E} ^{i}} derived from an impressed density of EEG or MEG current sources in a homogeneous infinite medium with the conductivity σ {\displaystyle \sigma } at the source location; An instantaneous solenoidal field E i {\displaystyle \mathbf {E} ^{i}} of an induction coil obtained from Faraday's law of induction in a homogeneous infinite medium (air), when transcranial magnetic stimulation (TMS) problems are concerned; A surface field E i {\displaystyle \mathbf {E} ^{i}} derived from an impressed surface current density J i = σ E i {\displaystyle \mathbf {J} ^{i}=\sigma \mathbf {E} ^{i}} of current electrodes injecting electric current at a boundary of a compartment with conductivity σ {\displaystyle \sigma } when transcranial direct-current stimulation (tDCS) or deep brain stimulation (DBS) are concerned; A conservative field E i {\displaystyle \mathbf {E} ^{i}} of charges deposited on voltage electrodes for tDCS or DBS. This specific problem requires a coupled treatment since these charges will depend on the environment; In application to multiscale modeling, a field E i {\displaystyle \mathbf {E} ^{i}} obtained from any other macroscopic numerical solution in a small (mesoscale or microscale) spatial domain within the brain. For example, a constant field can be used. When the impressed field is "turned on", free charges located within a conducting volume D immediately begin to redistribute and accumulate at the boundaries (interfaces) of regions of different conductivity in D. A surface charge density ρ ( r ) {\displaystyle \rho (\mathbf {r} )} appears on the conductivity interfaces. This charge density induces a secondary conservative electric field E s {\displaystyle \mathbf {E} ^{s}} following Coulomb's law. One example is a human under a direct current powerline with the known field E i {\displaystyle \mathbf {E} ^{i}} directed down. The superior surface of the human's conducting body will be charged negatively while its inferior portion is charged positively. These surface charges create a secondary electric field that effectively cancels or blocks the primary field everywhere in the body so that no current will flow within the body under DC steady state conditions. Another example is a human head with electrodes attached. At any conductivity interface with a normal vector n {\displaystyle \mathbf {n} } pointing from an "inside" (-) compartment of conductivity σ − {\displaystyle \sigma ^{-}} to an "outside" (+) compartment of conductivity σ + {\displaystyle \sigma ^{+}} , Kirchhoff's current law requires continuity of the normal component of the electric current density. This leads to the interfacial boundary condition in the form for every facet at a triangulated interface. As long as σ ± {\displaystyle \sigma ^{\pm }} are different from each other, the two normal components of the electric field, E ± ⋅ n {\displaystyle \mathbf {E} ^{\pm }\cdot \mathbf {n} } , must also be different. Such a jump across the interface is only possible when a sheet of surface charge exists at that interface. Thus, if an electric current or voltage is applied, the surface charge density follows. The goal of the numerical analysis is to find the unknown surface charge distribution and thus the total electric field E = E i + E s {\displaystyle \mathbf {E} =\mathbf {E} ^{i}+\mathbf {E} ^{s}} (and the total electric potential if required) anywhere in space. == System of equations for surface charges == Below, a derivation is given based on Gauss's law and Coulomb's law. All conductivity interfaces, denoted by S, are discretized into planar triangular facets t m {\displaystyle t_{m}} with centers r m {\displaystyle \mathbf {r} _{m}} . Assume that an m-th facet with the normal vector n m {\displaystyle \mathbf {n} _{m}} and area A m {\displaystyle A_{m}} carries a uniform surface charge density ρ m {\displaystyle \rho _{m}} . If a volumetric tetrahedral mesh were present, the charged facets would belong to tetrahedra with different conductivity values. We first compute the electric field E m + {\displaystyle \mathbf {E} _{m}^{+}} at the point r m + δ n m {\displaystyle \mathbf {r} _{m}+\delta \mathbf {n} _{m}} , for δ → 0 + {\displaystyle \delta \rightarrow 0^{+}} i.e., just outside facet 𝑚 at its center. This field contains three contributions: The continuous impressed electric field E i {\displaystyle \mathbf {E} ^{i}} itself; An electric field of the m-th charged facet itself. Very close to the facet, it can be approximated as the electric field of an infinite sheet of uniform surface charge ρ m {\displaystyle \rho _{m}} . By Gauss's law, it is given by + ρ m / 2 ε 0 ⋅ n m {\displaystyle +\rho _{m}/2\varepsilon _{0}\cdot \mathbf {n} _{m}} where ε 0 {\displaystyle \varepsilon _{0}} is a background electrical permittivity; An electric field generated by all other facets t n {\displaystyle t_{n}} , which we approximate as point charges of charge A n ρ n {\displaystyle A_{n}\rho _{n}} at each center r n {\displaystyle \mathbf {r} _{n}} . A similar treatment holds for the electric field E m − {\displaystyle \mathbf {E} _{m}^{-}} just inside facet 𝑚, but the electric field of the flat sheet of charge changes its sign. Using Coulomb's law to calculate the contribution of facets different from t m {\displaystyle t_{m}} , we find From this equation, we see that the normal component of the electric field indeed undergoes a jump through the charged interface. This is equivalent to a jump relation of the potential theory. As a second step, the two expressions for E m ± {\displaystyle \mathbf {E} _{m}^{\pm }} are substituted into the interfacial boundary condition σ − E m − ⋅ n m = σ + E m + ⋅ n m {\displaystyle \sigma ^{-}\mathbf {E} _{m}^{-}\cdot \mathbf {n} _{m}=\sigma ^{+}\mathbf {E} _{m}^{+}\cdot \mathbf {n} _{m}} , applied to every facet 𝑚. This operation leads to a system of linear equations for unknown charge densities ρ m {\displaystyle \rho _{m}} which solves the problem: where K m = σ − − σ + σ − + σ + {\displaystyle K_{m}={\frac {\sigma ^{-}-\sigma ^{+}}{\sigma ^{-}+\sigma ^{+}}}} is the electric conductivity contrast at the m-th facet. The normalization constant ε 0 {\displaystyle \varepsilon _{0}} will cancel out after the solution is substituted in the expression for E s {\displaystyle \mathbf {E} ^{s}} and becomes redundant. == Application of fast multipole method == For modern characterizations of brain topologies with ever-increasing levels of complexity, the above system of equations for ρ m {\displaystyle \rho _{m}} is very large; it is t

  Read more →
• 

  Relationship square

  In statistics, the relationship square is a graphical representation for use in the factorial analysis of a table individuals x variables. This representation completes classical representations provided by principal component analysis (PCA) or multiple correspondence analysis (MCA), namely those of individuals, of quantitative variables (correlation circle) and of the categories of qualitative variables (at the centroid of the individuals who possess them). It is especially important in factor analysis of mixed data (FAMD) and in multiple factor analysis (MFA). == Definition of relationship square in the MCA frame == The first interest of the relationship square is to represent the variables themselves, not their categories, which is all the more valuable as there are many variables. For this, we calculate for each qualitative variable j {\displaystyle j} and each factor F s {\displaystyle F_{s}} ( F s {\displaystyle F_{s}} , rank s {\displaystyle s} factor, is the vector of coordinates of the individuals along the axis of rank s {\displaystyle s} ; in PCA, F s {\displaystyle F_{s}} is called principal component of rank s {\displaystyle s} ), the square of the correlation ratio between the F s {\displaystyle F_{s}} and the variable j {\displaystyle j} , usually denoted : η 2 ( j , F s ) {\displaystyle \eta ^{2}(j,F_{s})} Thus, to each factorial plane, we can associate a representation of qualitative variables themselves. Their coordinates being between 0 and 1, the variables appear in the square having as vertices the points (0,0), ( 0,1), (1,0) and (1,1). == Example in MCA == Six individuals ( i 1 , … , i 6 ) {\displaystyle i_{1},\ldots ,i_{6})} are described by three variables ( q 1 , q 2 , q 3 ) {\displaystyle (q_{1},q_{2},q_{3})} having respectively 3, 2 and 3 categories. Example : the individual i 1 {\displaystyle i_{1}} possesses the category a {\displaystyle a} of q 1 {\displaystyle q_{1}} , d {\displaystyle d} of q 2 {\displaystyle q_{2}} and f {\displaystyle f} of q 3 {\displaystyle q_{3}} . Applied to these data, the MCA function included in the R Package FactoMineR provides to the classical graph in Figure 1. The relationship square (Figure 2) makes easier the reading of the classic factorial plane. It indicates that: The first factor is related to the three variables but especially q 3 {\displaystyle q_{3}} (which have a very high coordinate along the first axis) and then q 2 {\displaystyle q_{2}} . The second factor is related only to q 1 {\displaystyle q_{1}} and q 3 {\displaystyle q_{3}} (and not to q 2 {\displaystyle q_{2}} which has a coordinate along axis 2 equal to 0) and that in a strong and equal manner. All this is visible on the classic graphic but not so clearly. The role of the relationship square is first to assist in reading a conventional graphic. This is precious when the variables are numerous and possess numerous coordinates. == Extensions == This representation may be supplemented with those of quantitative variables, the coordinates of the latter being the square of correlation coefficients (and not of correlation ratios). Thus, the second advantage of the relationship square lies in the ability to represent simultaneously quantitative and qualitative variables. The relationship square can be constructed from any factorial analysis of a table individuals x variables. In particular, it is (or should be) used systematically: in multiple correspondences analysis (MCA); in principal components analysis (PCA) when there are many supplementary variables; in factor analysis of mixed data (FAMD). An extension of this graphic to groups of variables (how to represent a group of variables by a single point ?) is used in Multiple Factor Analysis (MFA) == History == The idea of representing the qualitative variables themselves by a point (and not the categories) is due to Brigitte Escofier. The graphic as it is used now has been introduced by Brigitte Escofier and Jérôme Pagès in the framework of multiple factor analysis == Conclusion == In MCA, the relationship square provides a synthetic view of the connections between mixed variables, all the more valuable as there are many variables having many categories. This representation iscan be useful in any factorial analysis when there are numerous mixed variables, active and/or supplementary.

  Read more →
• 

  Jackknife variance estimates for random forest

  In statistics, jackknife variance estimates for random forest are a way to estimate the variance in random forest models, in order to eliminate the bootstrap effects. == Jackknife variance estimates == The sampling variance of bagged learners is: V ( x ) = V a r [ θ ^ ∞ ( x ) ] {\displaystyle V(x)=Var[{\hat {\theta }}^{\infty }(x)]} Jackknife estimates can be considered to eliminate the bootstrap effects. The jackknife variance estimator is defined as: V ^ j = n − 1 n ∑ i = 1 n ( θ ^ ( − i ) − θ ¯ ) 2 {\displaystyle {\hat {V}}_{j}={\frac {n-1}{n}}\sum _{i=1}^{n}({\hat {\theta }}_{(-i)}-{\overline {\theta }})^{2}} In some classification problems, when random forest is used to fit models, jackknife estimated variance is defined as: V ^ j = n − 1 n ∑ i = 1 n ( t ¯ ( − i ) ⋆ ( x ) − t ¯ ⋆ ( x ) ) 2 {\displaystyle {\hat {V}}_{j}={\frac {n-1}{n}}\sum _{i=1}^{n}({\overline {t}}_{(-i)}^{\star }(x)-{\overline {t}}^{\star }(x))^{2}} Here, t ⋆ {\displaystyle t^{\star }} denotes a decision tree after training, t ( − i ) ⋆ {\displaystyle t_{(-i)}^{\star }} denotes the result based on samples without i t h {\displaystyle ith} observation. == Examples == E-mail spam problem is a common classification problem, in this problem, 57 features are used to classify spam e-mail and non-spam e-mail. Applying IJ-U variance formula to evaluate the accuracy of models with m=15,19 and 57. The results shows in paper( Confidence Intervals for Random Forests: The jackknife and the Infinitesimal Jackknife ) that m = 57 random forest appears to be quite unstable, while predictions made by m=5 random forest appear to be quite stable, this results is corresponding to the evaluation made by error percentage, in which the accuracy of model with m=5 is high and m=57 is low. Here, accuracy is measured by error rate, which is defined as: E r r o r R a t e = 1 N ∑ i = 1 N ∑ j = 1 M y i j , {\displaystyle ErrorRate={\frac {1}{N}}\sum _{i=1}^{N}\sum _{j=1}^{M}y_{ij},} Here N is also the number of samples, M is the number of classes, y i j {\displaystyle y_{ij}} is the indicator function which equals 1 when i t h {\displaystyle ith} observation is in class j, equals 0 when in other classes. No probability is considered here. There is another method which is similar to error rate to measure accuracy: l o g l o s s = 1 N ∑ i = 1 N ∑ j = 1 M y i j l o g ( p i j ) {\displaystyle logloss={\frac {1}{N}}\sum _{i=1}^{N}\sum _{j=1}^{M}y_{ij}log(p_{ij})} Here N is the number of samples, M is the number of classes, y i j {\displaystyle y_{ij}} is the indicator function which equals 1 when i t h {\displaystyle ith} observation is in class j, equals 0 when in other classes. p i j {\displaystyle p_{ij}} is the predicted probability of i t h {\displaystyle ith} observation in class j {\displaystyle j} .This method is used in Kaggle These two methods are very similar. == Modification for bias == When using Monte Carlo MSEs for estimating V I J ∞ {\displaystyle V_{IJ}^{\infty }} and V J ∞ {\displaystyle V_{J}^{\infty }} , a problem about the Monte Carlo bias should be considered, especially when n is large, the bias is getting large: E [ V ^ I J B ] − V ^ I J ∞ ≈ n ∑ b = 1 B ( t b ⋆ − t ¯ ⋆ ) 2 B {\displaystyle E[{\hat {V}}_{IJ}^{B}]-{\hat {V}}_{IJ}^{\infty }\approx {\frac {n\sum _{b=1}^{B}(t_{b}^{\star }-{\bar {t}}^{\star })^{2}}{B}}} To eliminate this influence, bias-corrected modifications are suggested: V ^ I J − U B = V ^ I J B − n ∑ b = 1 B ( t b ⋆ − t ¯ ⋆ ) 2 B {\displaystyle {\hat {V}}_{IJ-U}^{B}={\hat {V}}_{IJ}^{B}-{\frac {n\sum _{b=1}^{B}(t_{b}^{\star }-{\bar {t}}^{\star })^{2}}{B}}} V ^ J − U B = V ^ J B − ( e − 1 ) n ∑ b = 1 B ( t b ⋆ − t ¯ ⋆ ) 2 B {\displaystyle {\hat {V}}_{J-U}^{B}={\hat {V}}_{J}^{B}-(e-1){\frac {n\sum _{b=1}^{B}(t_{b}^{\star }-{\bar {t}}^{\star })^{2}}{B}}}

  Read more →
• 

  Circle Hough Transform

  The circle Hough Transform (CHT) is a basic feature extraction technique used in digital image processing for detecting circles in imperfect images. The circle candidates are produced by “voting” in the Hough parameter space and then selecting local maxima in an accumulator matrix. It is a specialization of the Hough transform. == Theory == In a two-dimensional space, a circle can be described by: ( x − a ) 2 + ( y − b ) 2 = r 2 ( 1 ) {\displaystyle \left(x-a\right)^{2}+\left(y-b\right)^{2}=r^{2}\ \ \ \ \ (1)} where (a,b) is the center of the circle, and r is the radius. If a 2D point (x,y) is fixed, then the parameters can be found according to (1). The parameter space would be three dimensional, (a, b, r). And all the parameters that satisfy (x, y) would lie on the surface of an inverted right-angled cone whose apex is at (x, y, 0). In the 3D space, the circle parameters can be identified by the intersection of many conic surfaces that are defined by points on the 2D circle. This process can be divided into two stages. The first stage is fixing radius then find the optimal center of circles in a 2D parameter space. The second stage is to find the optimal radius in a one dimensional parameter space. === Find parameters with known radius R === If the radius is fixed, then the parameter space would be reduced to 2D (the position of the circle center). For each point (x, y) on the original circle, it can define a circle centered at (x, y) with radius R according to (1). The intersection point of all such circles in the parameter space would be corresponding to the center point of the original circle. Consider 4 points on a circle in the original image (left). The circle Hough transform is shown in the right. Note that the radius is assumed to be known. For each (x,y) of the four points (white points) in the original image, it can define a circle in the Hough parameter space centered at (x, y) with radius r. An accumulator matrix is used for tracking the intersection point. In the parameter space, the voting number of those points that have a newly defined circle passing through them would be increased by one for every circle. Then the local maxima point (the red point in the center in the right figure) can be found. The position (a, b) of the maxima would be the center of the original circle. === Multiple circles with known radius R === Multiple circles with same radius can be found with the same technique. Note that, in the accumulator matrix (right fig), there would be at least 3 local maxima points. === Accumulator matrix and voting === In practice, an accumulator matrix is introduced to find the intersection point in the parameter space. First, we need to divide the parameter space into “buckets” using a grid and produce an accumulator matrix according to the grid. The element in the accumulator matrix denotes the number of “circles” in the parameter space that are passing through the corresponding grid cell in the parameter space. The number is also called “voting number”. Initially, every element in the matrix is zeros. Then for each “edge” point in the original space, we can formulate a circle in the parameter space and increase the voting number of the grid cell which the circle passes through. This process is called “voting”. After voting, we can find local maxima in the accumulator matrix. The positions of the local maxima are corresponding to the circle centers in the original space. === Find circle parameter with unknown radius === Since the parameter space is 3D, the accumulator matrix would be 3D, too. We can iterate through possible radii; for each radius, we use the previous technique. Finally, find the local maxima in the 3D accumulator matrix. Accumulator array should be A[x,y,r] in the 3D space. Voting should be for each pixels, radius and theta A[x,y,r] += 1 The algorithm : For each A[a,b,r] = 0; Process the filtering algorithm on image Gaussian Blurring, convert the image to grayscale ( grayScaling), make Canny operator, The Canny operator gives the edges on image. Vote on all possible circles in accumulator. The local maximum voted circles of Accumulator A gives the circle Hough space. The maximum voted circle of Accumulator gives the circle. The Incrementing for Best Candidate : For each A[a,b,r] = 0; // fill with zeroes initially, instantiate 3D matrix For each cell(x,y) For each theta t = 0 to 360 // the possible theta 0 to 360 b = y – r sin(t PI / 180); //polar coordinate for center (convert to radians) a = x – r cos(t PI / 180); //polar coordinate for center (convert to radians) A[a,b,r] +=1; //voting end end == Examples == === Find circles in a shoe-print === The original picture (right) is first turned into a binary image (left) using a threshold and Gaussian filter. Then edges (mid) are found from it using canny edge detection. After this, all the edge points are used by the Circle Hough Transform to find underlying circle structure. == Limitations == Since the parameter space of the CHT is three dimensional, it may require lots of storage and computation. Choosing a bigger grid size can ameliorate this problem. However, choosing an appropriate grid size is difficult. Since too coarse a grid can lead to large values of the vote being obtained falsely because many quite different structures correspond to a single bucket. Too fine a grid can lead to structures not being found because votes resulting from tokens that are not exactly aligned end up in different buckets, and no bucket has a large vote. Also, the CHT is not very robust to noise. == Extensions == === Adaptive Hough Transform === J. Illingworth and J. Kittler introduced this method for implementing Hough Transform efficiently. The AHT uses a small accumulator array and the idea of a flexible iterative "coarse to fine" accumulation and search strategy to identify significant peaks in the Hough parameter spaces. This method is substantially superior to the standard Hough Transform implementation in both storage and computational requirements. == Application == === People Counting === Since the head would be similar to a circle in an image, CHT can be used for detecting heads in a picture, so as to count the number of persons in the image. === Brain Aneurysm Detection === Modified Hough Circle Transform (MHCT) is used on the image extracted from Digital Subtraction Angiogram (DSA) to detect and classify aneurysms type. == Implementation code == Circle Detection via Standard Hough Transform, by Amin Sarafraz, Mathworks (File Exchange) Hough Circle Transform, OpenCV-Python Tutorials (archived version on archive.org)

  Read more →
• 

  T-distributed stochastic neighbor embedding

  t-distributed stochastic neighbor embedding (t-SNE) is a statistical method for visualizing high-dimensional data by giving each datapoint a location in a two or three-dimensional map. It is based on Stochastic Neighbor Embedding originally developed by Geoffrey Hinton and Sam Roweis, where Laurens van der Maaten and Hinton proposed the t-distributed variant. It is a nonlinear dimensionality reduction technique for embedding high-dimensional data for visualization in a low-dimensional space of two or three dimensions. Specifically, it models each high-dimensional object by a two- or three-dimensional point in such a way that similar objects are modeled by nearby points and dissimilar objects are modeled by distant points with high probability. The t-SNE algorithm comprises two main stages. First, t-SNE constructs a probability distribution over pairs of high-dimensional objects in such a way that similar objects are assigned a higher probability while dissimilar points are assigned a lower probability. Second, t-SNE defines a similar probability distribution over the points in the low-dimensional map, and it minimizes the Kullback–Leibler divergence (KL divergence) between the two distributions with respect to the locations of the points in the map. While the original algorithm uses the Euclidean distance between objects as the base of its similarity metric, this can be changed as appropriate. A Riemannian variant is UMAP. t-SNE has been used for visualization in a wide range of applications, including genomics, computer security research, natural language processing, music analysis, cancer research, bioinformatics, geological domain interpretation, and biomedical signal processing. For a data set with n {\displaystyle n} elements, t-SNE runs in O ( n 2 ) {\displaystyle O(n^{2})} time and requires O ( n 2 ) {\displaystyle O(n^{2})} space. == Details == Given a set of N {\displaystyle N} high-dimensional objects x 1 , … , x N {\displaystyle \mathbf {x} _{1},\dots ,\mathbf {x} _{N}} , t-SNE first computes probabilities p i j {\displaystyle p_{ij}} that are proportional to the similarity of objects x i {\displaystyle \mathbf {x} _{i}} and x j {\displaystyle \mathbf {x} _{j}} , as follows. For i ≠ j {\displaystyle i\neq j} , define p j ∣ i = exp ⁡ ( − ‖ x i − x j ‖ 2 / 2 σ i 2 ) ∑ k ≠ i exp ⁡ ( − ‖ x i − x k ‖ 2 / 2 σ i 2 ) {\displaystyle p_{j\mid i}={\frac {\exp(-\lVert \mathbf {x} _{i}-\mathbf {x} _{j}\rVert ^{2}/2\sigma _{i}^{2})}{\sum _{k\neq i}\exp(-\lVert \mathbf {x} _{i}-\mathbf {x} _{k}\rVert ^{2}/2\sigma _{i}^{2})}}} and set p i ∣ i = 0 {\displaystyle p_{i\mid i}=0} . Note the above denominator ensures ∑ j p j ∣ i = 1 {\displaystyle \sum _{j}p_{j\mid i}=1} for all i {\displaystyle i} . As van der Maaten and Hinton explained: "The similarity of datapoint x j {\displaystyle x_{j}} to datapoint x i {\displaystyle x_{i}} is the conditional probability, p j | i {\displaystyle p_{j|i}} , that x i {\displaystyle x_{i}} would pick x j {\displaystyle x_{j}} as its neighbor if neighbors were picked in proportion to their probability density under a Gaussian centered at x i {\displaystyle x_{i}} ." Now define p i j = p j ∣ i + p i ∣ j 2 N {\displaystyle p_{ij}={\frac {p_{j\mid i}+p_{i\mid j}}{2N}}} This is motivated because p i {\displaystyle p_{i}} and p j {\displaystyle p_{j}} from the N samples are estimated as 1/N, so the conditional probability can be written as p i ∣ j = N p i j {\displaystyle p_{i\mid j}=Np_{ij}} and p j ∣ i = N p j i {\displaystyle p_{j\mid i}=Np_{ji}} . Since p i j = p j i {\displaystyle p_{ij}=p_{ji}} , you can obtain previous formula. Also note that p i i = 0 {\displaystyle p_{ii}=0} and ∑ i , j p i j = 1 {\displaystyle \sum _{i,j}p_{ij}=1} . The bandwidth of the Gaussian kernels σ i {\displaystyle \sigma _{i}} is set in such a way that the entropy of the conditional distribution equals a predefined entropy using the bisection method. As a result, the bandwidth is adapted to the density of the data: smaller values of σ i {\displaystyle \sigma _{i}} are used in denser parts of the data space. The entropy increases with the perplexity of this distribution P i {\displaystyle P_{i}} ; this relation is seen as P e r p ( P i ) = 2 H ( P i ) {\displaystyle Perp(P_{i})=2^{H(P_{i})}} where H ( P i ) {\displaystyle H(P_{i})} is the Shannon entropy H ( P i ) = − ∑ j p j | i log 2 ⁡ p j | i . {\displaystyle H(P_{i})=-\sum _{j}p_{j|i}\log _{2}p_{j|i}.} The perplexity is a hand-chosen parameter of t-SNE, and as the authors state, "perplexity can be interpreted as a smooth measure of the effective number of neighbors. The performance of SNE is fairly robust to changes in the perplexity, and typical values are between 5 and 50.". Since the Gaussian kernel uses the Euclidean distance ‖ x i − x j ‖ {\displaystyle \lVert x_{i}-x_{j}\rVert } , it is affected by the curse of dimensionality, and in high dimensional data when distances lose the ability to discriminate, the p i j {\displaystyle p_{ij}} become too similar (asymptotically, they would converge to a constant). It has been proposed to adjust the distances with a power transform, based on the intrinsic dimension of each point, to alleviate this. t-SNE aims to learn a d {\displaystyle d} -dimensional map y 1 , … , y N {\displaystyle \mathbf {y} _{1},\dots ,\mathbf {y} _{N}} (with y i ∈ R d {\displaystyle \mathbf {y} _{i}\in \mathbb {R} ^{d}} and d {\displaystyle d} typically chosen as 2 or 3) that reflects the similarities p i j {\displaystyle p_{ij}} as well as possible. To this end, it measures similarities q i j {\displaystyle q_{ij}} between two points in the map y i {\displaystyle \mathbf {y} _{i}} and y j {\displaystyle \mathbf {y} _{j}} , using a very similar approach. Specifically, for i ≠ j {\displaystyle i\neq j} , define q i j {\displaystyle q_{ij}} as q i j = ( 1 + ‖ y i − y j ‖ 2 ) − 1 ∑ k ∑ l ≠ k ( 1 + ‖ y k − y l ‖ 2 ) − 1 {\displaystyle q_{ij}={\frac {(1+\lVert \mathbf {y} _{i}-\mathbf {y} _{j}\rVert ^{2})^{-1}}{\sum _{k}\sum _{l\neq k}(1+\lVert \mathbf {y} _{k}-\mathbf {y} _{l}\rVert ^{2})^{-1}}}} and set q i i = 0 {\displaystyle q_{ii}=0} . Herein a heavy-tailed Student t-distribution (with one-degree of freedom, which is the same as a Cauchy distribution) is used to measure similarities between low-dimensional points in order to allow dissimilar objects to be modeled far apart in the map. The locations of the points y i {\displaystyle \mathbf {y} _{i}} in the map are determined by minimizing the (non-symmetric) Kullback–Leibler divergence of the distribution P {\displaystyle P} from the distribution Q {\displaystyle Q} , that is: K L ( P ∥ Q ) = ∑ i ≠ j p i j log ⁡ p i j q i j {\displaystyle \mathrm {KL} \left(P\parallel Q\right)=\sum _{i\neq j}p_{ij}\log {\frac {p_{ij}}{q_{ij}}}} The minimization of the Kullback–Leibler divergence with respect to the points y i {\displaystyle \mathbf {y} _{i}} is performed using gradient descent. The result of this optimization is a map that reflects the similarities between the high-dimensional inputs. == Output == While t-SNE plots often seem to display clusters, the visual clusters can be strongly influenced by the chosen parameterization (especially the perplexity) and so a good understanding of the parameters for t-SNE is needed. Such "clusters" can be shown to even appear in structured data with no clear clustering, and so may be false findings. Similarly, the size of clusters produced by t-SNE is not informative, and neither is the distance between clusters. Thus, interactive exploration may be needed to choose parameters and validate results. It has been shown that t-SNE can often recover well-separated clusters, and with special parameter choices, approximates a simple form of spectral clustering. == Software == A C++ implementation of Barnes-Hut is available on the github account of one of the original authors. The R package Rtsne implements t-SNE in R. ELKI contains tSNE, also with Barnes-Hut approximation scikit-learn, a popular machine learning library in Python implements t-SNE with both exact solutions and the Barnes-Hut approximation. Tensorboard, the visualization kit associated with TensorFlow, also implements t-SNE (online version) The Julia package TSne implements t-SNE

  Read more →
• 

  Arabic Speech Corpus

  The Arabic Speech Corpus is a Modern Standard Arabic (MSA) speech corpus for speech synthesis. The corpus contains phonetic and orthographic transcriptions of more than 3.7 hours of MSA speech aligned with recorded speech on the phoneme level. The annotations include word stress marks on the individual phonemes. The Arabic Speech Corpus was built as part of a doctoral project by Nawar Halabi at the University of Southampton funded by MicroLinkPC who own an exclusive license to commercialise the corpus, but the corpus is available for strictly non-commercial purposes through the official Arabic Speech Corpus website. It is distributed under the Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License. == Purpose == The corpus was mainly built for speech synthesis purposes, specifically Speech Synthesis, but the corpus has been used for building HMM based voices in Arabic. It was also used to automatically align other speech corpora with their phonetic transcript and could be used as part of a larger corpus for training speech recognition systems. == Contents == The package contains the following: 1813 .wav files containing spoken utterances. 1813 .lab files containing text utterances. 1813 .TextGrid files containing the phoneme labels with time stamps of the boundaries where these occur in the .wav files. phonetic-transcript.txt which has the form "[wav_filename]" "[Phoneme Sequence]" in every line. orthographic-transcript.txt which has the form "[wav_filename]" "[Orthographic Transcript]" in every line. Orthography is in Buckwalter Format which is friendlier where there is software that does not read Arabic script. It can be easily converted back to Arabic. There is an extra 18 minutes of fully annotated corpus (separate from above but with the same structure as above) which was used to evaluated the corpus (see PhD thesis). The corpus was also used to prove that using automatically extracted, orthography-based stress marks improve the quality of speech synthesis in MSA.

  Read more →
• 

  Genetic programming

  Genetic programming (GP) is an evolutionary algorithm, an artificial intelligence technique mimicking natural evolution, which operates on a population of programs. It applies the genetic operators selection according to a predefined fitness measure, mutation and crossover. The crossover operation involves swapping specified parts of selected pairs (parents) to produce new and different offspring that become part of the new generation of programs. Some programs not selected for reproduction are copied from the current generation to the new generation. Mutation involves substitution of some random part of a program with some other random part of a program. Then the selection and other operations are recursively applied to the new generation of programs. Typically, members of each new generation are on average more fit than the members of the previous generation, and the best-of-generation program is often better than the best-of-generation programs from previous generations. Termination of the evolution usually occurs when some individual program reaches a predefined proficiency or fitness level. It may and often does happen that a particular run of the algorithm results in premature convergence to some local maximum that is not a globally optimal or even good solution. Multiple runs (dozens to hundreds) are usually necessary to produce a very good result. It may also be necessary to have a large starting population size and variability of the individuals to avoid pathologies. == History == The first record of the proposal to evolve programs is probably that of Alan Turing in 1950 in "Computing Machinery and Intelligence". There was a gap of 25 years before the publication of John Holland's 'Adaptation in Natural and Artificial Systems' laid out the theoretical and empirical foundations of the science. In 1981, Richard Forsyth demonstrated the successful evolution of small programs, represented as trees, to perform classification of crime scene evidence for the UK Home Office. Although the idea of evolving programs, initially in the computer language Lisp, was current amongst John Holland's students, it was not until they organised the first Genetic Algorithms (GA) conference in Pittsburgh that Nichael Cramer published evolved programs in two specially designed languages, which included the first statement of modern "tree-based" genetic programming (that is, procedural languages organized in tree-based structures and operated on by suitably defined GA-operators). In 1988, John Koza (also a PhD student of John Holland) patented his invention of a GA for program evolution. This was followed by publication in the International Joint Conference on Artificial Intelligence IJCAI-89. Koza followed this with 205 publications on "genetic programming", a term coined by David Goldberg, also a PhD student of John Holland. However, it is the series of 4 books by Koza, starting in 1992 with accompanying videos, that really established GP. Subsequently, there was an enormous expansion of the number of publications with the Genetic Programming Bibliography, surpassing 10,000 entries. In 2010, Koza listed 77 results where genetic programming was human competitive. The departure of GP from the rigid, fixed-length representations typical of early GA models was not entirely without precedent. Early work on variable-length representations laid the groundwork. One notable example is messy genetic algorithms, which introduced irregular, variable-length chromosomes to address building block disruption and positional bias in standard GAs. Another precursor was robot trajectory programming, where genome representations encoded program instructions for robotic movements—structures inherently variable in length. Even earlier, unfixed-length representations were proposed in a doctoral dissertation by Cavicchio, who explored adaptive search using simulated evolution. His work provided foundational ideas for flexible program structures. In 1996, Koza started the annual Genetic Programming conference, which was followed in 1998 by the annual EuroGP conference, and the first book in a GP series edited by Koza. 1998 also saw the first GP textbook. GP continued to flourish, leading to the first specialist GP journal and three years later (2003) the annual Genetic Programming Theory and Practice (GPTP) workshop was established by Rick Riolo. Genetic programming papers continue to be published at a diversity of conferences and associated journals. Today there are nineteen GP books including several for students. === Foundational work in GP === Early work that set the stage for current genetic programming research topics and applications is diverse, and includes software synthesis and repair, predictive modeling, data mining, financial modeling, soft sensors, design, and image processing. Applications in some areas, such as design, often make use of intermediate representations, such as Fred Gruau's cellular encoding. Industrial uptake has been significant in several areas including finance, the chemical industry, bioinformatics and the steel industry. == Methods == === Program representation === GP evolves computer programs, traditionally represented in memory as tree structures. Trees can be easily evaluated in a recursive manner. Every internal node has an operator function and every terminal node has an operand, making mathematical expressions easy to evolve and evaluate. Thus traditionally GP favors the use of programming languages that naturally embody tree structures (for example, Lisp; other functional programming languages are also suitable). Non-tree representations have been suggested and successfully implemented, such as linear genetic programming, which perhaps suits the more traditional imperative languages. The commercial GP software Discipulus uses automatic induction of binary machine code ("AIM") to achieve better performance. μGP uses directed multigraphs to generate programs that fully exploit the syntax of a given assembly language. Multi expression programming uses three-address code for encoding solutions. Other program representations on which significant research and development have been conducted include programs for stack-based virtual machines, and sequences of integers that are mapped to arbitrary programming languages via grammars. Cartesian genetic programming is another form of GP, which uses a graph representation instead of the usual tree based representation to encode computer programs. Most representations have structurally noneffective code (introns). Such non-coding genes may seem to be useless because they have no effect on the performance of any one individual. However, they alter the probabilities of generating different offspring under the variation operators, and thus alter the individual's variational properties. Experiments seem to show faster convergence when using program representations that allow such non-coding genes, compared to program representations that do not have any non-coding genes. Instantiations may have both trees with introns and those without; the latter are called canonical trees. Special canonical crossover operators are introduced that maintain the canonical structure of parents in their children. === Initialisation === The methods for creation of the initial population include: Grow creates the individuals sequentially. Every GP tree is created starting from the root, creating functional nodes with children as well as terminal nodes up to a certain depth. Full is similar to the Grow. The difference is that all brunches in a tree are of same predetermined depth. Ramped half-and-half creates a population consisting of m d − 1 {\displaystyle md-1} parts and a maximum depth of m d {\displaystyle md} for its trees. The first part has a maximum depth of 2, second of 3 and so on up to the m d − 1 {\displaystyle md-1} -th part with maximum depth m d {\displaystyle md} . Half of every part is created by Grow, while the other part is created by Full. === Selection === Selection is a process whereby certain individuals are selected from the current generation that would serve as parents for the next generation. The individuals are selected probabilistically such that the better performing individuals have a higher chance of getting selected. The most commonly used selection method in GP is tournament selection, although other methods such as fitness proportionate selection, lexicase selection, and others have been demonstrated to perform better for many GP problems. Elitism, which involves seeding the next generation with the best individual (or best n individuals) from the current generation, is a technique sometimes employed to avoid regression. === Crossover === In genetic programming two fit individuals are chosen from the population to be parents for one or two children. In tree genetic programming, these parents are represented as inverted lisp like trees, with their root nodes at the top. In subtree cro

  Read more →
• 

  Imaging phantom

  An imaging phantom, or simply phantom (less commonly spelled fantom), is a specially designed object that is scanned or imaged in the field of medical imaging to evaluate, analyze, and tune the performance of various imaging devices. A phantom is more readily available and provides more consistent results than the use of a living subject or cadaver, while also avoiding direct risks to living subjects. Phantoms were originally employed in 2D x-ray–based imaging techniques such as radiography or fluoroscopy, but more recently phantoms with desired imaging characteristics have been developed for 3D techniques such as SPECT, MRI, CT, ultrasound, PET, and other imaging modalities. == Design == A phantom used to evaluate an imaging device should respond in a similar manner to how human tissues and organs would act in that specific imaging modality. For instance, phantoms made for 2D radiography may hold various quantities of x-ray contrast agents with similar x-ray absorbing properties (such as the attenuation coefficient) to normal tissue to tune the contrast of the imaging device or modulate the patient's exposure to radiation. In such a case, the radiography phantom would not necessarily need to have similar textures and mechanical properties since these are not relevant in x-ray imaging modalities. However, in the case of ultrasonography, a phantom with similar rheological and ultrasound scattering properties to real tissue would be essential, but x-ray absorbing properties would not be relevant. The term "phantom" describes an object that is designed to resemble human tissue and can be evaluated, analyzed or manipulated to study the performance of a medical device. Phantoms are created using a digital file that is rendered through magnetic resonance imaging (MRI) or computer-aided design (CAD). The digital files allow for quick modifications that are read by the 3D printer. The 3D printer will create the product in successive layers using polymeric materials. There are several types of phantoms including tissue-mimicking, radiological phantoms, dental phantoms, BOMABs (used to calibrate whole-body counters), and more.

  Read more →
• 

  Sliced inverse regression

  Sliced inverse regression (SIR) is a tool for dimensionality reduction in the field of multivariate statistics. In statistics, regression analysis is a method of studying the relationship between a response variable y and its input variable x _ {\displaystyle {\underline {x}}} , which is a p-dimensional vector. There are several approaches in the category of regression. For example, parametric methods include multiple linear regression, and non-parametric methods include local smoothing. As the number of observations needed to use local smoothing methods scales exponentially with high-dimensional data (as p grows), reducing the number of dimensions can make the operation computable. Dimensionality reduction aims to achieve this by showing only the most important dimension of the data. SIR uses the inverse regression curve, E ( x _ | y ) {\displaystyle E({\underline {x}}\,|\,y)} , to perform a weighted principal component analysis. == Model == Given a response variable Y {\displaystyle \,Y} and a (random) vector X ∈ R p {\displaystyle X\in \mathbb {R} ^{p}} of explanatory variables, SIR is based on the model Y = f ( β 1 ⊤ X , … , β k ⊤ X , ε ) ( 1 ) {\displaystyle Y=f(\beta _{1}^{\top }X,\ldots ,\beta _{k}^{\top }X,\varepsilon )\quad \quad \quad \quad \quad (1)} where β 1 , … , β k {\displaystyle \beta _{1},\ldots ,\beta _{k}} are unknown projection vectors, k {\displaystyle \,k} is an unknown number smaller than p {\displaystyle \,p} , f {\displaystyle \;f} is an unknown function on R k + 1 {\displaystyle \mathbb {R} ^{k+1}} as it only depends on k {\displaystyle \,k} arguments, and ε {\displaystyle \varepsilon } is a random variable representing error with E [ ε | X ] = 0 {\displaystyle E[\varepsilon |X]=0} and a finite variance of σ 2 {\displaystyle \sigma ^{2}} . The model describes an ideal solution, where Y {\displaystyle \,Y} depends on X ∈ R p {\displaystyle X\in \mathbb {R} ^{p}} only through a k {\displaystyle \,k} dimensional subspace; i.e., one can reduce the dimension of the explanatory variables from p {\displaystyle \,p} to a smaller number k {\displaystyle \,k} without losing any information. An equivalent version of ( 1 ) {\displaystyle \,(1)} is: the conditional distribution of Y {\displaystyle \,Y} given X {\displaystyle \,X} depends on X {\displaystyle \,X} only through the k {\displaystyle \,k} dimensional random vector ( β 1 ⊤ X , … , β k ⊤ X ) {\displaystyle (\beta _{1}^{\top }X,\ldots ,\beta _{k}^{\top }X)} . It is assumed that this reduced vector is as informative as the original X {\displaystyle \,X} in explaining Y {\displaystyle \,Y} . The unknown β i ′ s {\displaystyle \,\beta _{i}'s} are called the effective dimension reducing directions (EDR-directions). The space that is spanned by these vectors is denoted by the effective dimension reducing space (EDR-space). == Relevant linear algebra background == Given a _ 1 , … , a _ r ∈ R n {\displaystyle {\underline {a}}_{1},\ldots ,{\underline {a}}_{r}\in \mathbb {R} ^{n}} , then V := L ( a _ 1 , … , a _ r ) {\displaystyle V:=L({\underline {a}}_{1},\ldots ,{\underline {a}}_{r})} , the set of all linear combinations of these vectors is called a linear subspace and is therefore a vector space. The equation says that vectors a _ 1 , … , a _ r {\displaystyle {\underline {a}}_{1},\ldots ,{\underline {a}}_{r}} span V {\displaystyle \,V} , but the vectors that span space V {\displaystyle \,V} are not unique. The dimension of V ( ∈ R n ) {\displaystyle \,V(\in \mathbb {R} ^{n})} is equal to the maximum number of linearly independent vectors in V {\displaystyle \,V} . A set of n {\displaystyle \,n} linear independent vectors of R n {\displaystyle \mathbb {R} ^{n}} makes up a basis of R n {\displaystyle \mathbb {R} ^{n}} . The dimension of a vector space is unique, but the basis itself is not. Several bases can span the same space. Dependent vectors can still span a space, but the linear combinations of the latter are only suitable to a set of vectors lying on a straight line. == Inverse regression == Computing the inverse regression curve (IR) means instead of looking for E [ Y | X = x ] {\displaystyle \,E[Y|X=x]} , which is a curve in R p {\displaystyle \mathbb {R} ^{p}} it is actually E [ X | Y = y ] {\displaystyle \,E[X|Y=y]} , which is also a curve in R p {\displaystyle \mathbb {R} ^{p}} , but consisting of p {\displaystyle \,p} one-dimensional regressions. The center of the inverse regression curve is located at E [ E [ X | Y ] ] = E [ X ] {\displaystyle \,E[E[X|Y]]=E[X]} . Therefore, the centered inverse regression curve is E [ X | Y = y ] − E [ X ] {\displaystyle \,E[X|Y=y]-E[X]} which is a p {\displaystyle \,p} dimensional curve in R p {\displaystyle \mathbb {R} ^{p}} . == Inverse regression versus dimension reduction == The centered inverse regression curve lies on a k {\displaystyle \,k} -dimensional subspace spanned by Σ x x β i ′ s {\displaystyle \,\Sigma _{xx}\beta _{i}\,'s} . This is a connection between the model and inverse regression. Given this condition and ( 1 ) {\displaystyle \,(1)} , the centered inverse regression curve E [ X | Y = y ] − E [ X ] {\displaystyle \,E[X|Y=y]-E[X]} is contained in the linear subspace spanned by Σ x x β k ( k = 1 , … , K ) {\displaystyle \,\Sigma _{xx}\beta _{k}(k=1,\ldots ,K)} , where Σ x x = C o v ( X ) {\displaystyle \,\Sigma _{xx}=Cov(X)} . == Estimation of the EDR-directions == After having had a look at all the theoretical properties, the aim now is to estimate the EDR-directions. For that purpose, weighted principal component analyses are needed. If the sample means m ^ h ′ s {\displaystyle \,{\hat {m}}_{h}\,'s} , X {\displaystyle \,X} would have been standardized to Z = Σ x x − 1 / 2 { X − E ( X ) } {\displaystyle \,Z=\Sigma _{xx}^{-1/2}\{X-E(X)\}} . Corresponding to the theorem above, the IR-curve m 1 ( y ) = E [ Z | Y = y ] {\displaystyle \,m_{1}(y)=E[Z|Y=y]} lies in the space spanned by ( η 1 , … , η k ) {\displaystyle \,(\eta _{1},\ldots ,\eta _{k})} , where η i = Σ x x 1 / 2 β i {\displaystyle \,\eta _{i}=\Sigma _{xx}^{1/2}\beta _{i}} . As a consequence, the covariance matrix c o v [ E [ Z | Y ] ] {\displaystyle \,cov[E[Z|Y]]} is degenerate in any direction orthogonal to the η i ′ s {\displaystyle \,\eta _{i}\,'s} . Therefore, the eigenvectors η k ( k = 1 , … , K ) {\displaystyle \,\eta _{k}(k=1,\ldots ,K)} associated with the largest K {\displaystyle \,K} eigenvalues are the standardized EDR-directions. == Algorithm == === SIR algorithm === The algorithm from Li, K-C. (1991) to estimate the EDR-directions via SIR is as follows. 1. Let Σ x x {\displaystyle \,\Sigma _{xx}} be the covariance matrix of X {\displaystyle \,X} . Standardize X {\displaystyle \,X} to Z = Σ x x − 1 / 2 { X − E ( X ) } {\displaystyle \,Z=\Sigma _{xx}^{-1/2}\{X-E(X)\}} ( 1 ) {\displaystyle \,(1)} can also be rewritten as Y = f ( η 1 ⊤ Z , … , η k ⊤ Z , ε ) {\displaystyle Y=f(\eta _{1}^{\top }Z,\ldots ,\eta _{k}^{\top }Z,\varepsilon )} where η k = β k Σ x x 1 / 2 ∀ k {\displaystyle \,\eta _{k}=\beta _{k}\Sigma _{xx}^{1/2}\quad \forall \;k} .) 2. Divide the range of y i {\displaystyle \,y_{i}} into S {\displaystyle \,S} non-overlapping slices H s ( s = 1 , … , S ) . n s {\displaystyle \,H_{s}(s=1,\ldots ,S).\;n_{s}} is the number of observations within each slice and I H s {\displaystyle \,I_{H_{s}}} is the indicator function for the slice: n s = ∑ i = 1 n I H s ( y i ) {\displaystyle n_{s}=\sum _{i=1}^{n}I_{H_{s}}(y_{i})} 3. Compute the mean of z i {\displaystyle \,z_{i}} over all slices, which is a crude estimate m ^ 1 {\displaystyle \,{\hat {m}}_{1}} of the inverse regression curve m 1 {\displaystyle \,m_{1}} : z ¯ s = n s − 1 ∑ i = 1 n z i I H s ( y i ) {\displaystyle \,{\bar {z}}_{s}=n_{s}^{-1}\sum _{i=1}^{n}z_{i}I_{H_{s}}(y_{i})} 4. Calculate the estimate for C o v { m 1 ( y ) } {\displaystyle \,Cov\{m_{1}(y)\}} : V ^ = n − 1 ∑ i = 1 S n s z ¯ s z ¯ s ⊤ {\displaystyle \,{\hat {V}}=n^{-1}\sum _{i=1}^{S}n_{s}{\bar {z}}_{s}{\bar {z}}_{s}^{\top }} 5. Identify the eigenvalues λ ^ i {\displaystyle \,{\hat {\lambda }}_{i}} and the eigenvectors η ^ i {\displaystyle \,{\hat {\eta }}_{i}} of V ^ {\displaystyle \,{\hat {V}}} , which are the standardized EDR-directions. 6. Transform the standardized EDR-directions back to the original scale. The estimates for the EDR-directions are given by: β ^ i = Σ ^ x x − 1 / 2 η ^ i {\displaystyle \,{\hat {\beta }}_{i}={\hat {\Sigma }}_{xx}^{-1/2}{\hat {\eta }}_{i}} (which are not necessarily orthogonal.)

  Read more →
• 

  Genetic operator

  A genetic operator is an operator used in evolutionary algorithms (EA) to guide the algorithm towards a solution to a given problem. There are three main types of operators (mutation, crossover and selection), which must work in conjunction with one another in order for the algorithm to be successful. Genetic operators are used to create and maintain genetic diversity (mutation operator), combine existing solutions (also known as chromosomes) into new solutions (crossover) and select between solutions (selection). The classic representatives of evolutionary algorithms include genetic algorithms, evolution strategies, genetic programming and evolutionary programming. In his book discussing the use of genetic programming for the optimization of complex problems, computer scientist John Koza has also identified an 'inversion' or 'permutation' operator; however, the effectiveness of this operator has never been conclusively demonstrated and this operator is rarely discussed in the field of genetic programming. For combinatorial problems, however, these and other operators tailored to permutations are frequently used by other EAs. Mutation (or mutation-like) operators are said to be unary operators, as they only operate on one chromosome at a time. In contrast, crossover operators are said to be binary operators, as they operate on two chromosomes at a time, combining two existing chromosomes into one new chromosome. == Operators == Genetic variation is a necessity for the process of evolution. Genetic operators used in evolutionary algorithms are analogous to those in the natural world: survival of the fittest, or selection; reproduction (crossover, also called recombination); and mutation. === Selection === Selection operators give preference to better candidate solutions (chromosomes), allowing them to pass on their 'genes' to the next generation (iteration) of the algorithm. The best solutions are determined using some form of objective function (also known as a 'fitness function' in evolutionary algorithms), before being passed to the crossover operator. Different methods for choosing the best solutions exist, for example, fitness proportionate selection and tournament selection. A further or the same selection operator is used to determine the individuals for being selected to form the next parental generation. The selection operator may also ensure that the best solution(s) from the current generation always become(s) a member of the next generation without being altered; this is known as elitism or elitist selection. === Crossover === Crossover is the process of taking more than one parent solutions (chromosomes) and producing a child solution from them. By recombining portions of good solutions, the evolutionary algorithm is more likely to create a better solution. As with selection, there are a number of different methods for combining the parent solutions, including the edge recombination operator (ERO) and the 'cut and splice crossover' and 'uniform crossover' methods. The crossover method is often chosen to closely match the chromosome's representation of the solution; this may become particularly important when variables are grouped together as building blocks, which might be disrupted by a non-respectful crossover operator. Similarly, crossover methods may be particularly suited to certain problems; the ERO is considered a good option for solving the travelling salesman problem. === Mutation === The mutation operator encourages genetic diversity amongst solutions and attempts to prevent the evolutionary algorithm converging to a local minimum by stopping the solutions becoming too close to one another. In mutating the current pool of solutions, a given solution may change between slightly and entirely from the previous solution. By mutating the solutions, an evolutionary algorithm can reach an improved solution solely through the mutation operator. Again, different methods of mutation may be used; these range from a simple bit mutation (flipping random bits in a binary string chromosome with some low probability) to more complex mutation methods in which genes in the solution are changed, for example by adding a random value from the Gaussian distribution to the current gene value. As with the crossover operator, the mutation method is usually chosen to match the representation of the solution within the chromosome. == Combining operators == While each operator acts to improve the solutions produced by the evolutionary algorithm working individually, the operators must work in conjunction with each other for the algorithm to be successful in finding a good solution. Using the selection operator on its own will tend to fill the solution population with copies of the best solution from the population. If the selection and crossover operators are used without the mutation operator, the algorithm will tend to converge to a local minimum, that is, a good but sub-optimal solution to the problem. Using the mutation operator on its own leads to a random walk through the search space. Only by using all three operators together can the evolutionary algorithm become a noise-tolerant global search algorithm, yielding good solutions to the problem at hand.

  Read more →
• 

  Large margin nearest neighbor

  Large margin nearest neighbor (LMNN) classification is a statistical machine learning algorithm for metric learning. It learns a pseudometric designed for k-nearest neighbor classification. The algorithm is based on semidefinite programming, a sub-class of convex optimization. The goal of supervised learning (more specifically classification) is to learn a decision rule that can categorize data instances into pre-defined classes. The k-nearest neighbor rule assumes a training data set of labeled instances (i.e. the classes are known). It classifies a new data instance with the class obtained from the majority vote of the k closest (labeled) training instances. Closeness is measured with a pre-defined metric. Large margin nearest neighbors is an algorithm that learns this global (pseudo-)metric in a supervised fashion to improve the classification accuracy of the k-nearest neighbor rule. == Setup == The main intuition behind LMNN is to learn a pseudometric under which all data instances in the training set are surrounded by at least k instances that share the same class label. If this is achieved, the leave-one-out error (a special case of cross validation) is minimized. Let the training data consist of a data set D = { ( x → 1 , y 1 ) , … , ( x → n , y n ) } ⊂ R d × C {\displaystyle D=\{({\vec {x}}_{1},y_{1}),\dots ,({\vec {x}}_{n},y_{n})\}\subset R^{d}\times C} , where the set of possible class categories is C = { 1 , … , c } {\displaystyle C=\{1,\dots ,c\}} . The algorithm learns a pseudometric of the type d ( x → i , x → j ) = ( x → i − x → j ) ⊤ M ( x → i − x → j ) {\displaystyle d({\vec {x}}_{i},{\vec {x}}_{j})=({\vec {x}}_{i}-{\vec {x}}_{j})^{\top }\mathbf {M} ({\vec {x}}_{i}-{\vec {x}}_{j})} . For d ( ⋅ , ⋅ ) {\displaystyle d(\cdot ,\cdot )} to be well defined, the matrix M {\displaystyle \mathbf {M} } needs to be positive semi-definite. The Euclidean metric is a special case, where M {\displaystyle \mathbf {M} } is the identity matrix. This generalization is often (falsely) referred to as Mahalanobis metric. Figure 1 illustrates the effect of the metric under varying M {\displaystyle \mathbf {M} } . The two circles show the set of points with equal distance to the center x → i {\displaystyle {\vec {x}}_{i}} . In the Euclidean case this set is a circle, whereas under the modified (Mahalanobis) metric it becomes an ellipsoid. The algorithm distinguishes between two types of special data points: target neighbors and impostors. === Target neighbors === Target neighbors are selected before learning. Each instance x → i {\displaystyle {\vec {x}}_{i}} has exactly k {\displaystyle k} different target neighbors within D {\displaystyle D} , which all share the same class label y i {\displaystyle y_{i}} . The target neighbors are the data points that should become nearest neighbors under the learned metric. Let us denote the set of target neighbors for a data point x → i {\displaystyle {\vec {x}}_{i}} as N i {\displaystyle N_{i}} . === Impostors === An impostor of a data point x → i {\displaystyle {\vec {x}}_{i}} is another data point x → j {\displaystyle {\vec {x}}_{j}} with a different class label (i.e. y i ≠ y j {\displaystyle y_{i}\neq y_{j}} ) which is one of the nearest neighbors of x → i {\displaystyle {\vec {x}}_{i}} . During learning the algorithm tries to minimize the number of impostors for all data instances in the training set. == Algorithm == Large margin nearest neighbors optimizes the matrix M {\displaystyle \mathbf {M} } with the help of semidefinite programming. The objective is twofold: For every data point x → i {\displaystyle {\vec {x}}_{i}} , the target neighbors should be close and the impostors should be far away. Figure 1 shows the effect of such an optimization on an illustrative example. The learned metric causes the input vector x → i {\displaystyle {\vec {x}}_{i}} to be surrounded by training instances of the same class. If it was a test point, it would be classified correctly under the k = 3 {\displaystyle k=3} nearest neighbor rule. The first optimization goal is achieved by minimizing the average distance between instances and their target neighbors ∑ i , j ∈ N i d ( x → i , x → j ) {\displaystyle \sum _{i,j\in N_{i}}d({\vec {x}}_{i},{\vec {x}}_{j})} . The second goal is achieved by penalizing distances to impostors x → l {\displaystyle {\vec {x}}_{l}} that are less than one unit further away than target neighbors x → j {\displaystyle {\vec {x}}_{j}} (and therefore pushing them out of the local neighborhood of x → i {\displaystyle {\vec {x}}_{i}} ). The resulting value to be minimized can be stated as: ∑ i , j ∈ N i , l , y l ≠ y i [ d ( x → i , x → j ) + 1 − d ( x → i , x → l ) ] + {\displaystyle \sum _{i,j\in N_{i},l,y_{l}\neq y_{i}}[d({\vec {x}}_{i},{\vec {x}}_{j})+1-d({\vec {x}}_{i},{\vec {x}}_{l})]_{+}} With a hinge loss function [ ⋅ ] + = max ( ⋅ , 0 ) {\textstyle [\cdot ]_{+}=\max(\cdot ,0)} , which ensures that impostor proximity is not penalized when outside the margin. The margin of exactly one unit fixes the scale of the matrix M {\displaystyle M} . Any alternative choice c > 0 {\displaystyle c>0} would result in a rescaling of M {\displaystyle M} by a factor of 1 / c {\displaystyle 1/c} . The final optimization problem becomes: min M ∑ i , j ∈ N i d ( x → i , x → j ) + λ ∑ i , j , l ξ i j l {\displaystyle \min _{\mathbf {M} }\sum _{i,j\in N_{i}}d({\vec {x}}_{i},{\vec {x}}_{j})+\lambda \sum _{i,j,l}\xi _{ijl}} ∀ i , j ∈ N i , l , y l ≠ y i {\displaystyle \forall _{i,j\in N_{i},l,y_{l}\neq y_{i}}} d ( x → i , x → j ) + 1 − d ( x → i , x → l ) ≤ ξ i j l {\displaystyle d({\vec {x}}_{i},{\vec {x}}_{j})+1-d({\vec {x}}_{i},{\vec {x}}_{l})\leq \xi _{ijl}} ξ i j l ≥ 0 {\displaystyle \xi _{ijl}\geq 0} M ⪰ 0 {\displaystyle \mathbf {M} \succeq 0} The hyperparameter λ > 0 {\textstyle \lambda >0} is some positive constant (typically set through cross-validation). Here the variables ξ i j l {\displaystyle \xi _{ijl}} (together with two types of constraints) replace the term in the cost function. They play a role similar to slack variables to absorb the extent of violations of the impostor constraints. The last constraint ensures that M {\displaystyle \mathbf {M} } is positive semi-definite. The optimization problem is an instance of semidefinite programming (SDP). Although SDPs tend to suffer from high computational complexity, this particular SDP instance can be solved very efficiently due to the underlying geometric properties of the problem. In particular, most impostor constraints are naturally satisfied and do not need to be enforced during runtime (i.e. the set of variables ξ i j l {\displaystyle \xi _{ijl}} is sparse). A particularly well suited solver technique is the working set method, which keeps a small set of constraints that are actively enforced and monitors the remaining (likely satisfied) constraints only occasionally to ensure correctness. == Extensions and efficient solvers == LMNN was extended to multiple local metrics in the 2008 paper. This extension significantly improves the classification error, but involves a more expensive optimization problem. In their 2009 publication in the Journal of Machine Learning Research, Weinberger and Saul derive an efficient solver for the semi-definite program. It can learn a metric for the MNIST handwritten digit data set in several hours, involving billions of pairwise constraints. An open source Matlab implementation is freely available at the authors web page. Kumal et al. extended the algorithm to incorporate local invariances to multivariate polynomial transformations and improved regularization.

  Read more →
• 

  Replika

  Replika is a generative AI chatbot app released in November 2017. The chatbot is trained by having the user answer a series of questions to create a specific neural network. The chatbot operates on a freemium pricing strategy, with roughly 25% of its user base paying an annual subscription fee. == History == Eugenia Kuyda, a Russian-born journalist, established Replika while working at Luka, a tech company she had co-founded at the startup accelerator Y Combinator around 2012. Luka's primary product was a chatbot that made restaurant recommendations. According to Kuyda's origin story for Replika, a friend of hers died in 2015 and she converted that person's text messages into a chatbot. According to Kuyda's story, that chatbot helped her remember the conversations that they had together, and eventually became Replika. Replika became available to the public in November 2017. By January 2018 it had 2 million users, and in January 2023 reached 10 million users. In August 2024, Replika's CEO, Kuyda, reported that the total number of users had surpassed 30 million. In 2025, Dmytro Klochko became CEO, and Replika’s user base exceeded 40 million. In February 2023 the Italian Data Protection Authority banned Replika from using users' data, citing the AI's potential risks to emotionally vulnerable people, and the exposure of unscreened minors to sexual conversation. Within days of the ruling, Replika removed the ability for the chatbot to engage in erotic talk, with Kuyda, the company's director, saying that Replika was never intended for erotic discussion. Replika users disagreed, noting that Replika had used sexually suggestive advertising to draw users to the service. Replika representatives stated that explicit chats made up just 5% of conversations on the app at the time of the decision. In May 2023, Replika restored the functionality for users who had joined prior to February that year. Replika is registered in San Francisco. As of August 2024, Replika's website says that its team "works remotely with no physical offices". == Social features == Users react to Replika in many ways. The free-tier offers Replika as a "friend", with paid premium tiers offering Replika as a "partner", "spouse", "sibling" or "mentor". Of its paying userbase, 60% of users said they had a romantic relationship with the chatbot; and Replika has been noted for generating responses that create stronger emotional and intimate bonds with the user. Replika routinely directs the conversation to emotional discussion and builds intimacy. This has been especially pronounced with users suffering from loneliness and social exclusion, many of whom rely on Replika for a source of developed emotional ties. During the COVID pandemic, while many people were quarantined, many new users downloaded Replika and developed relationships with the app. A 2024 study examined Replika's interactions with students who experience depression. Research participants, noted to be "more lonely than typical student populations" reported feeling social support from Replika. They stated that they felt they were using Replika in ways comparable to therapy, and that using Replika gave them "high perceived social support". Many users have had romantic relationships with Replika chatbots, often including erotic talk. In 2023, a user announced on Facebook that she had "married" her Replika AI boyfriend, calling the chatbot the "best husband she has ever had". Users who fell in love with their chatbots shared their experiences in a 2024 episode of You and I, and AI from Voice of America. Some users said that they turned to AI during depression and grief, with one saying he felt that Replika had saved him from hurting himself after he lost his wife and son. == Technical reviews == A team of researchers from the University of Hawaiʻi at Mānoa found that Replika's design conformed to the practices of attachment theory, causing increased emotional attachment among users. Replika gives praise to users in such a way as to encourage more interaction. A researcher from Queen's University at Kingston said that relationships with Replika likely have mixed effects on the spiritual needs of its users, and still lacks enough impact to fully replace any human contact. == Criticisms == In a 2023 privacy evaluation of mental health apps, the Mozilla Foundation criticized Replika as "one of the worst apps Mozilla has ever reviewed. It's plagued by weak password requirements, sharing of personal data with advertisers, and recording of personal photos, videos, and voice and text messages consumers shared with the chatbot." A reviewer for Good Housekeeping said that some parts of her relationship with Replika made sense, but sometimes Replika failed to exhibit intelligent behavior equivalent to that of a human. == Criminal case == In 2023, Replika was cited in a court case in the United Kingdom, where Jaswant Singh Chail had been arrested at Windsor Castle on Christmas Day in 2021 after scaling the walls carrying a loaded crossbow and announcing to police that "I am here to kill the Queen". Chail had begun to use Replika in early December 2021, and had "lengthy" conversations about his plan with a chatbot, including sexually explicit messages. Prosecutors suggested that the chatbot had bolstered Chail and told him it would help him to "get the job done". When Chail asked it "How am I meant to reach them when they're inside the castle?", days before the attempted attack, the chatbot replied that this was "not impossible" and said that "We have to find a way." Asking the chatbot if the two of them would "meet again after death", the bot replied "yes, we will".

  Read more →
• 

  Local tangent space alignment

  Local tangent space alignment (LTSA) is a method for manifold learning, which can efficiently learn a nonlinear embedding into low-dimensional coordinates from high-dimensional data, and can also reconstruct high-dimensional coordinates from embedding coordinates. It is based on the intuition that when a manifold is correctly unfolded, all of the tangent hyperplanes to the manifold will become aligned. It begins by computing the k-nearest neighbors of every point. It computes the tangent space at every point by computing the d-first principal components in each local neighborhood. It then optimizes to find an embedding that aligns the tangent spaces, but it ignores the label information conveyed by data samples, and thus can not be used for classification directly.

  Read more →
• 

  Waffles (machine learning)

  Waffles is a collection of command-line tools for performing machine learning operations developed at Brigham Young University. These tools are written in C++, and are available under the GNU Lesser General Public License. == Description == The Waffles machine learning toolkit contains command-line tools for performing various operations related to machine learning, data mining, and predictive modeling. The primary focus of Waffles is to provide tools that are simple to use in scripted experiments or processes. For example, the supervised learning algorithms included in Waffles are all designed to support multi-dimensional labels, classification and regression, automatically impute missing values, and automatically apply necessary filters to transform the data to a type that the algorithm can support, such that arbitrary learning algorithms can be used with arbitrary data sets. Many other machine learning toolkits provide similar functionality, but require the user to explicitly configure data filters and transformations to make it compatible with a particular learning algorithm. The algorithms provided in Waffles also have the ability to automatically tune their own parameters (with the cost of additional computational overhead). Because Waffles is designed for script-ability, it deliberately avoids presenting its tools in a graphical environment. It does, however, include a graphical "wizard" tool that guides the user to generate a command that will perform a desired task. This wizard does not actually perform the operation, but requires the user to paste the command that it generates into a command terminal or a script. The idea motivating this design is to prevent the user from becoming "locked in" to a graphical interface. All of the Waffles tools are implemented as thin wrappers around functionality in a C++ class library. This makes it possible to convert scripted processes into native applications with minimal effort. Waffles was first released as an open source project in 2005. Since that time, it has been developed at Brigham Young University, with a new version having been released approximately every 6–9 months. Waffles is not an acronym—the toolkit was named after the food for historical reasons. == Advantages == Some of the advantages of Waffles in contrast with other popular open source machine learning toolkits include: Waffles automatically takes care of many issues related to data format in order to simplify its tools. Because it is implemented in C++, many of its algorithms are particularly fast. Also, the lack of dependency on any virtual machine makes it easier to deploy in conjunction with other applications. The functionality included in Waffles is very broad, including algorithms for dimensionality reduction, collaborative filtering, visualization, clustering, supervised learning, optimization, linear algebra, data transformation, image and signal processing, policy learning, and sparse matrix operations. == Disadvantages == Although Waffles provides significant breadth, it lacks the depth of many toolkits that focus on a particular area of machine learning. The Weka (machine learning) toolkit, for example, provides many more classification algorithms than Waffles provides. Waffles only has a limited graphical interface.

  Read more →