AI Coding Meta

AI Coding Meta — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

Z-order

Z-order is an ordering of overlapping two-dimensional objects, such as windows in a stacking window manager, shapes in a vector graphics editor, or objects in a 3D application. One of the features of a typical GUI is that windows may overlap, so that one window hides part or all of another. When two windows overlap, their Z-order determines which one appears on top of the other. == Definition == The term "Z-order" refers to the order of objects along the Z-axis. In coordinate geometry, X typically refers to the horizontal axis (left to right), Y to the vertical axis (up and down), and Z refers to the axis perpendicular to the other two (forward or backward). One can think of the windows in a GUI as a series of planes parallel to the surface of the monitor. The windows are therefore stacked along the Z-axis, and the Z-order information thus specifies the front-to-back ordering of the windows on the screen. An analogy would be some sheets of paper scattered on top of a table, each sheet being a window, the table your computer screen, and the top sheet having the highest Z value. == Use == Typically, users of a GUI can affect the Z-order by selecting a window to be brought to the foreground (that is, "above" or "in front of" all the other windows). Some window managers allow interaction with windows while they are not in the foreground, while others will bring a window to the front whenever it receives input from the user. It is also possible for special windows to be designated "always on top"; these are then fixed to the top of the Z-order so that (with few exceptions) no other window can overlap them. When dealing with visual objects on a computer screen, an object with a Z-order of 1 would be visually "underneath" an object with a Z-order of 2 or greater. This is the same as making "layers" of objects where the Z-order determines what object is on top of another. An HTML page can use CSS to specify the Z-order so that some objects can be layered over others. Z-ordering is also used in 3D applications to determine object visibility based on overlap from other objects. This confers a speed advantage to the user as the computer does not need to render unseen objects. In practice, of course, some objects may be only partially obscured, and this is a complication that must be taken into account. In early real-time 3D graphics, Z-order was applied on a per-polygon basis to avoid using Z-buffer, which was considered expensive at the time. In modern 3D graphics, Z-order is used for order-dependent rendering, for example with semi-transparent objects. It can also be used to reduce the problem of Z-fighting, by either rendering farther objects first and then using weak inequality as the depth test or, conversely, rendering front-to-back and using strict inequality. == z-index == The actual number assigned to a particular place in the Z-order is sometimes known as the z-index. In particular the CSS property that sets the stack order of specific elements is known as the z-index. An element with greater stack order is always in front of another element with lower stack order. Negative values can also be used in the same manner. A negative value will appear behind a positive one. z-index only works on elements that have a position value (e.g. position: relative;) and for many coders, this one of the first things to investigate when debugging why the z-index isn't working. Like all other CSS properties, it can be set with JavaScript, with the following syntax:
Read more →
Interplanetary Internet

The interplanetary Internet is a conceived computer network in space, consisting of a set of network nodes that can communicate with each other. These nodes are the planet's orbiters and landers, and the Earth ground stations. For example, the orbiters collect the scientific data from the Curiosity rover on Mars through near-Mars communication links, transmit the data to Earth through direct links from the Mars orbiters to the Earth ground stations via the NASA Deep Space Network, and finally the data routed through Earth's internal internet. Interplanetary communication is greatly delayed by interplanetary distances, as data transmission can only go as fast as the speed of light, so a new set of protocols and technologies that are tolerant to large delays and errors are required. The interplanetary Internet has been envisioned as a store and forward network of internets that is often disconnected, has a wireless backbone fraught with error-prone links and delays ranging from tens of minutes to even hours, even when there is a connection. As of 2024 agencies and companies working towards bringing the network to fruition include NASA, ESA, SpaceX and Blue Origin. == Challenges and reasons == In the core implementation of Interplanetary Internet, satellites orbiting a planet communicate to other planet's satellites. Simultaneously, these planets revolve around the Sun with long distances, and thus many challenges face the communications. The reasons and the resultant challenges are: The motion and long distances between planets: The interplanetary communication is greatly delayed due to the interplanetary distances and the motion of the planets. The delay is variable and long, ranging from a couple of minutes (Earth-to-Mars), to a couple of hours (Pluto-to-Earth), depending on their relative positions. The interplanetary communication also suspends due to the solar conjunction, when the sun's radiation hinders the direct communication between the planets. As such, the communication characterizes lossy links and intermittent link connectivity. Low embeddable payload: Satellites can only carry a small payload, which poses challenges to the power, mass, size, and cost for communication hardware design. An asymmetric bandwidth would be the result of this limitation. This asymmetry reaches ratios up to 1000:1 as downlink:uplink bandwidth portion. Absence of fixed infrastructure: The graph of participating nodes in a specific planet-to-planet communication keeps changing over time, due to the constant motion. The routes of the planet-to-planet communication are planned and scheduled rather than being opportunistic. The Interplanetary Internet design must address these challenges to operate successfully and achieve good communication with other planets. It also must use the few available resources efficiently in the system. == Development == Space communication technology has steadily evolved from expensive, one-of-a-kind point-to-point architectures, to the re-use of technology on successive missions, to the development of standard protocols agreed upon by space agencies of many countries. This last phase has gone on since 1982 through the efforts of the Consultative Committee for Space Data Systems (CCSDS), a body composed of the major space agencies of the world. It has 11 member agencies, 32 observer agencies, and over 119 industrial associates. The evolution of space data system standards has gone on in parallel with the evolution of the Internet, with conceptual cross-pollination where fruitful, but largely as a separate evolution. Since the late 1990s, familiar Internet protocols and CCSDS space link protocols have integrated and converged in several ways; for example, the successful FTP file transfer to Earth-orbiting STRV 1B on January 2, 1996, which ran FTP over the CCSDS IPv4-like Space Communications Protocol Specifications (SCPS) protocols. Internet Protocol use without CCSDS has taken place on spacecraft, e.g., demonstrations on the UoSAT-12 satellite, and operationally on the Disaster Monitoring Constellation. Having reached the era where networking and IP on board spacecraft have been shown to be feasible and reliable, a forward-looking study of the bigger picture was the next phase. The Interplanetary Internet study at NASA's Jet Propulsion Laboratory (JPL) was started by a team of scientists at JPL led by internet pioneer Vinton Cerf and the late Adrian Hooke. Cerf was appointed as a distinguished visiting scientist at JPL in 1998, while Hooke was one of the founders and directors of CCSDS. While IP-like SCPS protocols are feasible for short hops, such as ground station to orbiter, rover to lander, lander to orbiter, probe to flyby, and so on, delay-tolerant networking is needed to get information from one region of the Solar System to another. It becomes apparent that the concept of a region is a natural architectural factoring of the Interplanetary Internet. A region is an area where the characteristics of communication are the same. Region characteristics include communications, security, the maintenance of resources, perhaps ownership, and other factors. The Interplanetary Internet is a "network of regional internets". What is needed then, is a standard way to achieve end-to-end communication through multiple regions in a disconnected, variable-delay environment using a generalized suite of protocols. Examples of regions might include the terrestrial Internet as a region, a region on the surface of the Moon or Mars, or a ground-to-orbit region. The recognition of this requirement led to the concept of a "bundle" as a high-level way to address the generalized Store-and-Forward problem. Bundles are an area of new protocol development in the upper layers of the OSI model, above the Transport Layer with the goal of addressing the issue of bundling store-and-forward information so that it can reliably traverse radically dissimilar environments constituting a "network of regional internets". Delay-tolerant networking (DTN) was designed to enable standardized communications over long distances and through time delays. At its core is the Bundle Protocol (BP), which is similar to the Internet Protocol, or IP, that serves as the heart of the Internet here on Earth. The big difference between the regular Internet Protocol (IP) and the Bundle Protocol is that IP assumes a seamless end-to-end data path, while BP is built to account for errors and disconnections — glitches that commonly plague deep-space communications. Bundle Service Layering, implemented as the Bundling protocol suite for delay-tolerant networking, will provide general-purpose delay-tolerant protocol services in support of a range of applications: custody transfer, segmentation and reassembly, end-to-end reliability, end-to-end security, and end-to-end routing among them. The Bundle Protocol was first tested in space on the UK-DMC satellite in 2008. An example of one of these end-to-end applications flown on a space mission is the CCSDS File Delivery Protocol (CFDP), used on the Deep Impact comet mission. CFDP is an international standard for automatic, reliable file transfer in both directions. CFDP should not be confused with Coherent File Distribution Protocol, which has the same acronym and is an IETF-documented experimental protocol for rapidly deploying files to multiple targets in a highly networked environment. In addition to reliably copying a file from one entity (such as a spacecraft or ground station) to another entity, CFDP has the capability to reliably transmit arbitrarily small messages defined by the user, in the metadata accompanying the file, and to reliably transmit commands relating to file system management that are to be executed automatically on the remote end-point entity (such as a spacecraft) upon successful reception of a file. == Protocol == The Consultative Committee for Space Data Systems (CCSDS) packet telemetry standard defines the protocol used for the transmission of spacecraft instrument data over the deep-space channel. Under this standard, an image or other data sent from a spacecraft instrument is transmitted using one or more packets. === CCSDS packet definition === A packet is a block of data with length that can vary between successive packets, ranging from 7 to 65,542 bytes, including the packet header. Packetized data is transmitted via frames, which are fixed-length data blocks. The size of a frame, including frame header and control information, can range up to 2048 bytes. Packet sizes are fixed during the development phase. Because packet lengths are variable but frame lengths are fixed, packet boundaries usually do not coincide with frame boundaries. === Telecom processing notes === Data in a frame is typically protected from channel errors by error-correcting codes. Even when the channel errors exceed the correction capability of the error-correcting code, the presence of errors is nearly always detected by the e
Read more →
Cypherpunks (book)

Cypherpunks: Freedom and the Future of the Internet is a 2012 book by Julian Assange, in discussion with Internet activists and cypherpunks Jacob Appelbaum, Andy Müller-Maguhn and Jérémie Zimmermann. Its primary topic is society's relationship with information security. In the book, the authors warn that the Internet has become a tool of the police state, and that the world is inadvertently heading toward a form of totalitarianism. They promote the use of cryptography to protect against state surveillance. In the introduction, Assange says that the book is "not a manifesto [...] [but] a warning". He told Guardian journalist Decca Aitkenhead: A well-defined mathematical algorithm can encrypt something quickly, but to decrypt it would take billions of years – or trillions of dollars' worth of electricity to drive the computer. So cryptography is the essential building block of independence for organisations on the Internet, just like armies are the essential building blocks of states, because otherwise one state just takes over another. There is no other way for our intellectual life to gain proper independence from the security guards of the world, the people who control physical reality. Assange later wrote in The Guardian: "Strong cryptography is a vital tool in fighting state oppression." saying that was the message of his book, Cypherpunks. Cypherpunks is published by OR Books. It is primarily a transcript of World Tomorrow episode eight, a two-part interview between Assange, Jacob Appelbaum, Andy Müller-Maguhn, and Jérémie Zimmermann. In the foreword, Assange said, "the Internet, our greatest tool for emancipation, has been transformed into the most dangerous facilitator of totalitarianism we have ever seen".
Read more →
List of broadband over power line deployments

This is a list of broadband over power line deployments. In this sense, "broadband" usually refers to Internet access using power line communication technology. == BPL pilot projects - 1st Gen (UPA) == === Inactive pilot projects === North America: United States: The United Telecom Council publishes the Federal Communications Commission (FCC)-mandated BPL Interference Resolution website, which provides a list of all BPL deployments in the US. Canada: Quebec: As of 2005, PLC communication technology developed by Ariane Controls is being installed inside and outside existing buildings to control lights and other energy-hungry devices. The cheap devices allow energy consumption to be better managed, and so save much energy and bring a clear return on investment. Western Europe: Sweden: Vattenfall is using PLC technology at 1200 baud for automatic meter reading based on an Iskraemeco product. Central and Eastern Europe, and Eurasia: Russian Federation: Electro-com has deployed widely BPL/PLC technology and offers internet access service in Moscow, Nizhny Novgorod, Ryazan, Kaluga and Rostov-on-Don, planning to extend coverage to main Russian cities. Currently the company does not provide other services, though plans to start providing telephone, and television services someday. Base equipment is a DefiDev modem with a DS2 chipset. The company had 35,000 subscribers and an annual growth of 15-20%. The company has, however, halted operations in Moscow in September, 2008, having sold its client network to an IDSL internet provider. Romania: In January, 2006, the Ministry of Communications and Information Technology introduced a PLC trial in the rural locality of Band, Mureș County, offering phone and broadband internet access for €7 per month. The technology was introduced to 50 households. Montenegro: In March, 2002, the Internet Crna Gora biggest internet provider in Montenegro launched a pilot project in town of Cetinje. Serbia: In August 2002, the Star Engineering from Niš launched a pilot project to show a completely new way to access the Internet, which is a new in that time in most countries around the world. Hungary: The first powerline service in Hungary was realized in September, 2003, in the Riverside apartment house in Budapest by 23Vnet Ltd. The PLC equipment was supplied by ASCOM Powerline. After four months the service was counting 100 users from 450 apartment owners. The bandwidth is 4.5 Mbit/s. Asia, Pacific, and Oceania: Indonesia: PT Kejora Gemilang Internusa "KEJORA", under their banner PLANET BROADBAND, is currently rolling out broadband over power line, with over 300,000 homes expected to be enabled by August 2010. PT. Kejora Gemilang Internusa signed an 8-year Joint Venture concession agreement with ICON+ a division of PT. Perusahaan Listrik Negara (Indonesia electricity company). Under the terms of the agreement PLAnet Broadband are to supply BPL/PLC to Jakarta West and West Java. Another company, PT. Broadband Powerline Indonesia, has been developing broadband over power line in apartment buildings since 2006. PT. BPI also produces data couplers to make broadband over powerline possible in three phases (R, S, T) with a single master. India : In India IIIT Allahabad has completed a project in co-operation with Corinex Communications Canada to implement a prototype of BPL for University campus and nearby villages. Africa and the Middle East: Egypt: The Engineering Office for Integrated Projects (EOIP) has deployed PLC technology widely in Alexandria, Fayed, and Tanta. Based on a locally developed system, the company provides AMR for electricity utilities. Currently, the company has about 70,000 subscribers. South Africa: Goal Technology Solutions (GTS) trialled the technology and is offering service in the suburbs of Pretoria, and plans to extend it to other areas. The tests were done with Mitsubishi equipment using a DS2 chipset, and the company claims a maximum throughput of 90 Mbit/s although initially only "512 Kbits/s ADSL equivalent speeds" are available. Now it uses DefiDev's equipment, and according to GTS's website, it will expand available bandwidth up to 5-20 Mbit/s. Ghana: Cactel Communications, Ltd. successfully deployed an MV solution pilot project in the Graphic Communications Group in Accra in June, 2005. A Cactel Remote Energy Management System (REMS) pilot project for the Electricity Company of Ghana (ECG) is running a 40-user pilot project at the University of Ghana in Legon. The current project combines fiber, radio link, Wi-Fi and PLC to provide broadband internet access and telephony. It showcases the interoperability of PLC technology and the company's expertise in emerging market design and deployment. Cactel hopes to deploy nationally, and is in deliberations with the national stakeholders and with Ghana's Ministry of Communications (MoC). AllTerra Communications successfully implemented a pilot test of broadband over power lines in Akosombo. In partnership with VRA, this test involves demonstrating transmission of broadband from medium to low voltage signals. AllTerra is working with VRA to expand the pilot project to include essential grid management utilities that will help balance and manage the current electricity transmission throughout their various substations. Using IT as a catalyst for economic development, AllTerra is expanding into numerous areas throughout Ghana. Vobiss Solutions Ltd successfully implemented a Hybrid Fibre BPL pilot network within EMEFS Hillview Estate in collaboration with ECG. Saudi Arabia: ElectroNet has been working with the Saudi Electric Company since 2005 on a pilot project using broadband over power lines over medium voltage cables and linking into low voltage distribution within a shopping mall. The pilot project also integrates automatic meter readers. Powerlines Communications Co. Ltd. implemented an AMR pilot project for Saudi Electricity Company in 2006. The project was located in the city of Jeddah on the west coast of Saudi Arabia. Digital KWh meters were installed in parallel with analog KWh meters. Readings taken by the Saudi Electricity Company showed variations of less than 1%. A BPL pilot project was included. Saudi Arabian Computer Management Consultants (SACMAC) has signed a deal to become an official system integrator and distributor for Mitsubishi PLC. It is expected to become a great success, because the existing broadband service, monopolized by the Saudi Telecom Company, is expensive and has poor customer service (some clients report that company techs arrive months after ordering). SACMAC has declined to talk about specifics of availability and price but says it will start rolling out the service in a few months (as of May 2006) and its price will be lower than current broadband providers. === Concluded pilot projects === The following pilot projects have ended: Australia, Tasmania: In November 2007, electricity retailer Aurora Energy ended its involvement with BPL and announced it was switching to Optical Fiber. This ended their commercial trial begun in September 2005, offering BPL services to 500 homes in the suburb of Tolmans Hill near Hobart, which had followed a successful technological trial earlier that year. Portugal ended BPL/PLC deployments in the country in October 2006, reportedly for economic reasons., Russian Federation: In September 2008, Russia's only BPL provider Electro-com ended deployments in Moscow for economic reasons. Spain: In May 2007 Iberdrola and Endesa (the main power companies in Spain) ended their projects to deploy PLC. United States: As of July 2010, the City of Manassas, VA has shut down their BPL deployment, which was the largest in the country. As of April 2007, Motorola has shuttered its Powerline LV Access BPL and reportedly plans to re-purpose the technology to a new system called Powerline MU, which is for use within multiple-unit dwellings. Motorola's system uses only residential-side low-voltage power lines for transmission to reduce the antenna effect, and successfully demonstrated frequency-notching for reduced potential for interference over the Amperion Inc. and Current Technologies LLC systems. Motorola invited the American Radio Relay League to participate with these tests, and even installed the Motorola system at their headquarters. Preliminary results were very positive with regard to interference, because the Motorola system does not use BPL on the powerlines leading up to the neighborhood. The BPL carrier is only used for the last leg of the trip from the pole to the house, and gets the signal to the pole via radio. This limits the interference to the area surrounding the last leg to the house. === Dismantled pilot projects === The following other BPL trials in the US are dismantled as of May 2008:
Read more →
ISPConfig

ISPConfig is an open source hosting control panel for Linux, licensed under BSD license and developed by the company ISPConfig UG. The ISPConfig project was started in autumn 2005 by Till Brehm from the German company projektfarm GmbH. == Overview == Using the dashboard, administrators have the ability to manage websites, email addresses, MySQL and MariaDB as well as PostgreSQL (since version 3.3) databases, FTP accounts, Shell accounts and DNS records through a web-based interface. The software has 4 login levels: administrator, reseller, client, and email-user, each with a different set of permissions. == Operating Systems == ISPConfig is only available on Linux, with CentOS, Debian, and Ubuntu being among the supported distributions. == Features == The following services and features are supported: Management of a single or multiple servers from one control panel. Web server management for Apache HTTP Server and Nginx. Mail server management (with virtual mail users) with spam and antivirus filter using Postfix (software) and Dovecot (software). DNS server management (BIND, Powerdns). Configuration mirroring and clusters. Administrator, reseller, client and mail-user login. Virtual server management for OpenVZ Servers. Website statistics using Webalizer and AWStats
Read more →
Customer data management

Customer data management (CDM) is the ways in which businesses keep track of their customer information and survey their customer base in order to obtain feedback. CDM includes a range of software or cloud computing applications designed to give large organizations rapid and efficient access to customer data. Surveys and data can be centrally located and widely accessible within a company, as opposed to being warehoused in separate departments. CDM encompasses the collection, analysis, organizing, reporting and sharing of customer information throughout an organization. Businesses need a thorough understanding of their customers’ needs if they are to retain and increase their customer base. Efficient CDM solutions provide companies with the ability to deal instantly with customer issues and obtain immediate feedback. As a result, customer retention and customer satisfaction can show marked improvement. According to a study by Aberdeen Group, "above-average and best-in-class companies... attain greater than 20% annual improvement in retention rates, revenues, data accuracy and partner/customer satisfaction rates." == Customer data management and cloud computing == Cloud computing offers an attractive choice for CDM in many companies due to its accessibility and cost-effectiveness. Businesses can decide who, within their company, should have the ability to create, adjust, analyze or share customer information. In December 2010, 52% of Information Technology (IT) professionals worldwide were deploying, or planning to deploy, cloud computing; this percentage is far higher in many countries. == Background == Customer data management, as a term, was coined in the 1990s, pre-dating the alternative term enterprise feedback management (EFM). CDM was introduced as a software solution that would replace earlier disc-based or paper-based surveys and spreadsheet data. Initially, CDM solutions were marketed to businesses as software, which were specific to one company, and often to one department within that company. This was superseded by application service providers (ASPs) where software was hosted for end user organizations, thus avoiding the necessity for IT professionals to deploy and support software. However, ASPs with their single-tenancy architecture were, in turn, superseded by software as a service (SaaS), engineered for multi-tenancy. By 2007 SaaS applications, giving businesses on-demand access to their customer information, were rapidly gaining popularity compared with ASPs. Cloud computing now includes SaaS and many prominent CDM providers offer cloud-based applications to their clients. In recent years, there has been a push away from the term EFM, with many of those working in this area advocating the slightly updated use of CDM. The return to the term CDM is largely based on the greater need for clarity around the solutions offered by companies, and on the desire to retire terminology veering on techno-jargon that customers may have a hard time understanding.
Read more →
Campus network

A campus network, campus area network, corporate area network or CAN is a computer network made up of an interconnection of local area networks (LANs) within a limited geographical area. The networking equipments (switches, routers) and transmission media (optical fiber, copper plant, Cat5 cabling etc.) are almost entirely owned by the campus tenant / owner: an enterprise, university, government etc. A campus area network is larger than a local area network but smaller than a metropolitan area network (MAN) or wide area network (WAN). == University campuses == College or university campus area networks often interconnect a variety of buildings, including administrative buildings, academic buildings, laboratories, university libraries, or student centers, residence halls, gymnasiums, and other outlying structures, like conference centers, technology centers, and training institutes. Early examples include the Stanford University Network at Stanford University, Project Athena at MIT, and the Andrew Project at Carnegie Mellon University. == Corporate campuses == Much like a university campus network, a corporate campus network serves to connect buildings. Examples of such are the networks at Googleplex and Microsoft's campus. Campus networks are normally interconnected with high speed Ethernet links operating over optical fiber such as gigabit Ethernet and 10 Gigabit Ethernet. == Area range == The range of CAN is 1 to 5 km (1 to 3 mi). If two buildings have the same domain and they are connected with a network, then it will be considered as CAN only. Though the CAN is mainly used for corporate campuses so the link will be high speed.
Read more →
Cambridge Semantics

Cambridge Semantics is a privately held company headquartered in Boston, Massachusetts with an office in San Diego, California. The company is an enterprise big data management and exploratory analytics software company. == History == Cambridge Semantics was founded in 2007 by Sean Martin, Lee Feigenbaum, Simon Martin, Rouben Meschian, Ben Szekely and Emmett Eldred who all previously worked at IBM's Advanced Technology Internet Group. In 2012, Cambridge Semantics appointed Chuck Pieper as chief executive. Pieper was previously at Credit Suisse. In January 2016, Cambridge Semantics acquired SPARQL City and its graph database intellectual property. On April 18, 2024, Altair Engineering acquired Cambridge Semantics. On 26 March 2025, Siemens announced the acquisition of Altair. == Products == Anzo Smart Data Lake uses Semantic Web Technologies. It allows IT departments and their business users to access data. AnzoGraph DB Graph database. AnzoGraph DB is a massively parallel processing (MPP) native graph database built for diverse data harmonization and analytics at scale (trillions of triples and more), speed and deep link insights. It is used for embedded analytics that require graph algorithms, graph views, named queries, aggregates, geospatial, built-in data science functions, data warehouse-style BI and reporting functions. It allows users to load and query RDF data using SPARQL or Cypher for OLAP-style analytics. == Marketing == Cambridge Semantics named SIIA Codie award 2018 finalist. Cambridge Semantics named 2018 Gold Stevie Award Winner for 'Big Data Solutions'. Cambridge Semantics named KMWorld’s 2018 ‘100 Companies That Matter in Knowledge Management’. Cambridge Semantics named to Database Trends and Applications' 'Trend-Setting Products in Data and Information Management for 2018'. Cambridge Semantics named to KMWorld Trend-Setting Products of 2017. Cambridge Semantics named to Database Trends and Applications 'DBTA 100: The Companies That Matter Most in Data'. Cambridge Semantics named SIIA Codie award 2017 winner for ‘Best Text Analytics and Semantic Technology Solution’. Cambridge Semantics named 2017 Silver Stevie Award Winner for 'Big Data Solutions'. Cambridge Semantics named KMWorld’s 2017 ‘100 Companies That Matter in Knowledge Management’. Cambridge Semantics named SIIA Codie award 2016 finalist. Cambridge Semantics named KMWorld’s 2016 ‘100 Companies That Matter in Knowledge Management’ and KMWorld Trend-Setting Products of 2015. Cambridge Semantics named 2016 Bio-IT World Best of Show People's Choice Award Contenders and 2015 Bio-IT best of show finalist. Anzo Insider Trading Investigation and Surveillance named 2015 CODiE Award finalist. Cambridge Semantics Selected as Finalist for 2014 MIT Sloan CIO Symposium's Innovation Showcase. Cambridge Semantics named SIIA CODiE Award 2014 finalist. Cambridge Semantics Win 2013 SIIA CODiE Award for best business intelligence and analytics solution. Cambridge Semantics wins KMWorld 2012 Promise Award. Cambridge Semantics wins Best of Show at 2012 Bio-IT World Conference.
Read more →
Smart speaker industry in South Korea

Smart speakers, or AI speakers, have been developed by multiple domestic electronics and telecommunications firms in South Korea. Since their introduction to the local market in 2016, they have been used by millions of people in the country. == Brands == === Google === In September 2018, Google Home (including the Google Home Mini) launched in South Korea. Running Google Assistant, it featured simultaneous recognition of two languages among a total of seven, including Korean. At launch, it could play music from Bugs!, in addition to YouTube. === Kakao === In November 2017, Kakao launched the Kakao Mini, featuring integrated KakaoTalk functionality. === KT === KT launched the GiGA Genie smart speaker in January 2017, using a Harman Kardon speaker. In November 2017, KT announced GiGA Genie LTE, a portable AI speaker with LTE support. They also released a mini speaker called GiGA Genie Buddy. In 2018, KT created a special version of GiGa Genie with a screen for use in hotels. On 29 April 2019, KT announced the GiGA Genie Table TV, a consumer-oriented smart speaker with a display. It featured paid TV access through Wi-Fi. Based on usage data from the hotel model, KT decided not to add a touchscreen. The Table TV also featured a limited-access "personalized-text-to-speech technology" which could use parents' voice recording inputs to read children books. In February 2022, KT began rolling out Amazon Alexa integration into its speakers for English support. === Naver === In August 2017, Naver announced the Wave smart speaker, operating on Clova. In October 2017, Naver launched the Friends smart speaker, which were designed based on Line characters. ==== LG Uplus ==== In December 2017, LG Uplus launched the Friends+ speaker with Naver, operating on U+ Home AI. === Samsung === In August 2018, Samsung announced the Samsung Galaxy Home in partnership with Spotify. The original size was delayed, while the Galaxy Home Mini appeared briefly as a bonus for Samsung Galaxy S20 preorders in South Korea in February 2020. === SK Telecom === SK Telecom launched the Nugu smart speaker in September 2016, using an Astell & Kern audio system. In August 2017, SKT released a portable speaker named Nugu mini. In July 2018, SKT launched the Nugu Candle, featuring expanded mood lighting. The first-generation Nugu was subsequently discontinued. On 18 April 2019, SKT released the NUGU Nemo AI, which featured a display and JBL stereo speaker. In August 2019, SKT collaborated with SM Entertainment, incorporating functions related to the agency's artists into Nugu. In January 2022, SKT showcased the NUGU Candle SE, introducing Alexa support. == Usage == In 2018, approximately 3 million people in South Korea used smart speakers. According to data from KT in 2018, the most common commands to its speakers were for controlling televisions. Based on a broader survey in 2017, music was selected as the most frequent use case. By 2018, smart speaker companies were partnering with reading and other education services, adding potential use-cases for children. By 2022, smart speakers were being utilized by the South Korean government. SKT, in partnership with 70 regional governments, distributed smart speakers to 12,000 senior citizens living alone. The government paid for monthly subscriptions to help seniors stay mentally engaged. Naver made an agreement with the Seoul Metropolitan Government to provide Clova CareCall, an automated health checkup program to hundreds of senior citizens living alone. KT's AI care service included an emergency dispatch call function and medication notifications. == Criticism == === Communication === In a survey of 300 users in 2017, approximately half reported having some type of communication issue with their smart speakers. === Privacy === South Korean smart speakers sparked privacy concerns when they were found to be collecting and documenting user audio data in 2019. The speaker companies responded that only a minority of data was collected and that it was anonymized. They stated that such recordings were collected for performance improvements.
Read more →
Plaintext

In cryptography, plaintext usually means unencrypted information pending input into cryptographic algorithms, usually encryption algorithms. This usually refers to data that is transmitted or stored unencrypted. == Overview == With the advent of computing, the term plaintext expanded beyond human-readable documents to mean any data, including binary files, in a form that can be viewed or used without requiring a key or other decryption device. Information—a message, document, file, etc.—if to be communicated or stored in an unencrypted form is referred to as plaintext. Plaintext is used as input to an encryption algorithm; the output is usually termed ciphertext, particularly when the algorithm is a cipher. Codetext is less often used, and almost always only when the algorithm involved is actually a code. Some systems use multiple layers of encryption, with the output of one encryption algorithm becoming "plaintext" input for the next. == Secure handling == Insecure handling of plaintext can introduce weaknesses into a cryptosystem by letting an attacker bypass the cryptography altogether. Plaintext is vulnerable in use and in storage, whether in electronic or paper format. Physical security means the securing of information and its storage media from physical, attack—for instance by someone entering a building to access papers, storage media, or computers. Discarded material, if not disposed of securely, may be a security risk. Even shredded documents and erased magnetic media might be reconstructed with sufficient effort. If plaintext is stored in a computer file, the storage media, the computer and its components, and all backups must be secure. Sensitive data is sometimes processed on computers whose mass storage is removable, in which case physical security of the removed disk is vital. In the case of securing a computer, useful (as opposed to handwaving) security must be physical (e.g., against burglary, brazen removal under cover of supposed repair, installation of covert monitoring devices, etc.), as well as virtual (e.g., operating system modification, illicit network access, Trojan programs). Wide availability of keydrives, which can plug into most modern computers and store large quantities of data, poses another severe security headache. A spy (perhaps posing as a cleaning person) could easily conceal one, and even swallow it if necessary. Discarded computers, disk drives and media are also a potential source of plaintexts. Most operating systems do not actually erase anything— they simply mark the disk space occupied by a deleted file as 'available for use', and remove its entry from the file system directory. The information in a file deleted in this way remains fully present until overwritten at some later time when the operating system reuses the disk space. With even low-end computers commonly sold with many gigabytes of disk space and rising monthly, this 'later time' may be months later, or never. Even overwriting the portion of a disk surface occupied by a deleted file is insufficient in many cases. Peter Gutmann of the University of Auckland wrote a celebrated 1996 paper on the recovery of overwritten information from magnetic disks; areal storage densities have gotten much higher since then, so this sort of recovery is likely to be more difficult than it was when Gutmann wrote. Modern hard drives automatically remap failing sectors, moving data to good sectors. This process makes information on those failing, excluded sectors invisible to the file system and normal applications. Special software, however, can still extract information from them. Some government agencies (e.g., US NSA) require that personnel physically pulverize discarded disk drives and, in some cases, treat them with chemical corrosives. This practice is not widespread outside government, however. Garfinkel and Shelat (2003) analyzed 158 second-hand hard drives they acquired at garage sales and the like, and found that less than 10% had been sufficiently sanitized. The others contained a wide variety of readable personal and confidential information. See data remanence. Physical loss is a serious problem. The US State Department, Department of Defense, and the British Secret Service have all had laptops with secret information, including in plaintext, lost or stolen. Appropriate disk encryption techniques can safeguard data on misappropriated computers or media. On occasion, even when data on host systems is encrypted, media that personnel use to transfer data between systems is plaintext because of poorly designed data policy. For example, in October 2007, HM Revenue and Customs lost CDs that contained the unencrypted records of 25 million child benefit recipients in the United Kingdom. Modern cryptographic systems resist known plaintext or even chosen plaintext attacks, and so may not be entirely compromised when plaintext is lost or stolen. Older systems resisted the effects of plaintext data loss on security with less effective techniques—such as padding and Russian copulation to obscure information in plaintext that could be easily guessed.
Read more →
Cipher

In cryptography, a cipher (or cypher) is an algorithm for performing encryption or decryption—a series of well-defined steps that can be followed as a procedure. An alternative, less common term is encipherment. To encipher or encode is to convert information into cipher or code. In common parlance, "cipher" is synonymous with "code", as they are both a set of steps that encrypt a message; however, the concepts are distinct in cryptography, especially classical cryptography. Codes generally substitute different length strings of characters in the output, while ciphers generally substitute the same number of characters as are input. A code maps one meaning with another. Words and phrases can be coded as letters or numbers. Codes typically have direct meaning from input to key. Codes primarily function to save time. Ciphers are algorithmic. The given input must follow the cipher's process to be solved. Ciphers are commonly used to encrypt written information. Codes operated by substituting according to a large codebook which linked a random string of characters or numbers to a word or phrase. For example, "UQJHSE" could be the code for "Proceed to the following coordinates.". When using a cipher the original information is known as plaintext, and the encrypted form as ciphertext. The ciphertext message contains all the information of the plaintext message, but is not in a format readable by a human or computer without the proper mechanism to decrypt it. The operation of a cipher usually depends on a piece of auxiliary information, called a key (or, in traditional NSA parlance, a cryptovariable). The encrypting procedure is varied depending on the key, which changes the detailed operation of the algorithm. A key must be selected before using a cipher to encrypt a message, with some exceptions such as ROT13 and Atbash. Most modern ciphers can be categorized in several ways: By whether they work on blocks of symbols usually of a fixed size (block ciphers), or on a continuous stream of symbols (stream ciphers). By whether the same key is used for both encryption and decryption (symmetric key algorithms), or if a different key is used for each (asymmetric key algorithms). If the algorithm is symmetric, the key must be known to the recipient and sender and to no one else. If the algorithm is an asymmetric one, the enciphering key is different from, but closely related to, the deciphering key. If one key cannot be deduced from the other, the asymmetric key algorithm has the public/private key property and one of the keys may be made public without loss of confidentiality. == Etymology == Originating from the Sanskrit word for zero शून्य (śuṇya), via the Arabic word صفر (ṣifr), the word "cipher" spread to Europe as part of the Arabic numeral system during the Middle Ages. The Roman numeral system lacked the concept of zero, and this limited advances in mathematics. In this transition, the word was adopted into Medieval Latin as cifra, and then into Middle French as cifre. This eventually led to the English word cipher (also spelt cypher). One theory for how the term came to refer to encoding is that the concept of zero was confusing to Europeans, and so the term came to refer to a message or communication that was not easily understood. The term cipher was later also used to refer to any Arabic digit, or to calculation using them, so encoding text in the form of Arabic numerals is literally converting the text to "ciphers". == Versus codes == In casual contexts, "code" and "cipher" can typically be used interchangeably; however, the technical usages of the words refer to different concepts. Codes contain meaning; words and phrases are assigned to numbers or symbols, creating a shorter message. An example of this is the commercial telegraph code which was used to shorten long telegraph messages which resulted from entering into commercial contracts using exchanges of telegrams. Another example is given by whole word ciphers, which allow the user to replace an entire word with a symbol or character, much like the way written Japanese utilizes Kanji (meaning Chinese characters in Japanese) characters to supplement the native Japanese characters representing syllables. An example using English language with Kanji could be to replace "The quick brown fox jumps over the lazy dog" by "The quick brown 狐 jumps 上 the lazy 犬". Stenographers sometimes use specific symbols to abbreviate whole words. Ciphers, on the other hand, work at a lower level: the level of individual letters, small groups of letters, or, in modern schemes, individual bits and blocks of bits. Some systems used both codes and ciphers in one system, using superencipherment to increase the security. In some cases the terms codes and ciphers are used synonymously with substitution and transposition, respectively. Historically, cryptography was split into a dichotomy of codes and ciphers, while coding had its own terminology analogous to that of ciphers: "encoding, codetext, decoding" and so on. However, codes have a variety of drawbacks, including susceptibility to cryptanalysis and the difficulty of managing a cumbersome codebook. Because of this, codes have fallen into disuse in modern cryptography, and ciphers are the dominant technique. == Types == There are a variety of different types of encryption. Algorithms used earlier in the history of cryptography are substantially different from modern methods, and modern ciphers can be classified according to how they operate and whether they use one or two keys. === Historical === The Caesar Cipher is one of the earliest known cryptographic systems. Julius Caesar used a cipher that shifts the letters in the alphabet in place by three and wrapping the remaining letters to the front to write to Marcus Tullius Cicero in approximately 50 BC. Historical pen and paper ciphers used in the past are sometimes known as classical ciphers. They include simple substitution ciphers (such as ROT13) and transposition ciphers (such as a Rail Fence Cipher). For example, "GOOD DOG" can be encrypted as "PLLX XLP" where "L" substitutes for "O", "P" for "G", and "X" for "D" in the message. Transposition of the letters "GOOD DOG" can result in "DGOGDOO". These simple ciphers and examples are easy to crack, even without plaintext-ciphertext pairs. In the 1640s, the Parliamentarian commander, Edward Montagu, 2nd Earl of Manchester, developed ciphers to send coded messages to his allies during the English Civil War. The English theologian John Wilkins published a book in 1641 titled "Mercury, or The Secret and Swift Messenger" and described a musical cipher wherein letters of the alphabet were substituted for music notes. This species of melodic cipher was depicted in greater detail by author Abraham Rees in his book Cyclopædia (1778). Simple ciphers were replaced by polyalphabetic substitution ciphers (such as the Vigenère) which changed the substitution alphabet for every letter. For example, "GOOD DOG" can be encrypted as "PLSX TWF" where "L", "S", and "W" substitute for "O". With even a small amount of known or estimated plaintext, simple polyalphabetic substitution ciphers and letter transposition ciphers designed for pen and paper encryption are easy to crack. It is possible to create a secure pen and paper cipher based on a one-time pad, but these have other disadvantages. During the early twentieth century, electro-mechanical machines were invented to do encryption and decryption using transposition, polyalphabetic substitution, and a kind of "additive" substitution. In rotor machines, several rotor disks provided polyalphabetic substitution, while plug boards provided another substitution. Keys were easily changed by changing the rotor disks and the plugboard wires. Although these encryption methods were more complex than previous schemes and required machines to encrypt and decrypt, other machines such as the British Bombe were invented to crack these encryption methods. === Modern === Modern encryption methods can be divided by two criteria: by type of key used, and by type of input data. By type of key used ciphers are divided into: symmetric key algorithms (Private-key cryptography), where one same key is used for encryption and decryption, and asymmetric key algorithms (Public-key cryptography), where two different keys are used for encryption and decryption. In a symmetric key algorithm (e.g., DES and AES), the sender and receiver must have a shared key set up in advance and kept secret from all other parties; the sender uses this key for encryption, and the receiver uses the same key for decryption. The design of AES (Advanced Encryption System) was beneficial because it aimed to overcome the flaws in the design of the DES (Data encryption standard). AES's designer's claim that the common means of modern cipher cryptanalytic attacks are ineffective against AES due to its design structure. Ciphers can be distinguished into two types by the type o
Read more →
European Grid Infrastructure

EGI (originally an initialism for European Grid Infrastructure) is a federation of computing and storage resource providers that deliver advanced computing and data analytics services for research and innovation. The Federation is governed by its participants represented in the EGI Council and coordinated by the EGI Foundation. As of 2024, the EGI Federation supports 160 scientific communities worldwide and over 95,000 users in their intensive data analysis. The most significant scientific communities supported by EGI in 2022 were Medical and Health Sciences, High Energy Physics, and Engineering and Technology. The EGI Federation provideds services through over 150 data centres, of which 25 are cloud sites, in 43 countries and 64 Research Infrastructures (4 of which are members of the Federation). == Name == Originally, EGI stood for European Grid Infrastructure. This reflected its focus on providing access to high-throughput computing resources across Europe using Grid computing techniques. However, as EGI's service offerings expanded beyond traditional grid computing, particularly with the incorporation of federated cloud services, the original meaning of the acronym became less accurate. To emphasise the broader scope of EGI's services and avoid any confusion associated with the outdated term "grid," it is recommended to refer to EGI simply as EGI. == Structure == === EGI Federation === The EGI Federation delivers a scalable digital research infrastructure (e-infrastructure), empowering tens of thousands of researchers across diverse scientific disciplines. Through the EGI Federation, researchers gain access to advanced computing and data analytics capabilities, including large-scale data analysis, while benefiting from the collaborative efforts of hundreds of service providers from both public and private sectors, consolidating resources from Europe and beyond. Overall, the EGI Federation offers a range of services, encompassing distributed high-throughput computing and cloud computing, storage and data management capabilities, co-development of new solutions, expert support, and comprehensive training opportunities. This ecosystem propels collaboration, scientific progress and innovation. === EGI Foundation === The EGI Foundation is the coordinating body of the EGI Federation. It was established in 2010 with headquarters in Amsterdam, Netherlands. The Foundation coordinates the research and innovation efforts of its members, spanning technical areas critical to data-intensive science, including large-scale data processing and analysis, distributed Artificial Intelligence/Machine Learning, federated Identity and access management and the application of digital twins for research. The day-to-day running of the EGI Foundation is supervised by the Executive Board. The board’s members work closely with the EGI Director on operational, technical and financial issues. The Executive Board’s members are appointed by the EGI Council for a two-year term. === EGI Council === The EGI Council is responsible for defining the strategic direction of the EGI Federation. The Council acts as the senior decision-making and supervisory authority of the EGI Foundation, with a mandate to define the strategic direction of the entire EGI ecosystem. === EGI Services === EGI offers a suite of services to support data-intensive research. These services include compute resources, orchestration tools, storage and data management solutions, training programmes, security and identity services, and applications. Compute resources encompass cloud compute, cloud container compute, high-throughput compute, and software distribution. Orchestration tools include the Workload Manager and infrastructure manager. Storage and data management solutions include online storage, data transfer, and DataHub. Training programmes cover FitSM, ISO 27001, and general training infrastructure. EGI Check-in and Secrets Store are key security and identity services, while applications such as Notebooks and Replay enhance research productivity. In addition to services for Research, EGI also provides services for Federation and Business. Services for Federation are designed to help resource providers and user communities collaborate and share resources. EGI also offers a range of services to support businesses in their digital transformation. Through the EGI Digital Innovation Hub (EGI DIH), companies can access advanced computing resources, networking, funding and training opportunities, collaborate with research institutions, and test solutions before investing. == History == In 2002, the first large-scale experimental facility was successfully demonstrated by the DataGrid project under the lead of CERN with tens of technical architects from the major High Energy Physics institutes in the world. For the first time, distributed computing was applied to data-intensive processing. It aimed at developing a large-scale computational grid to facilitate distributed data-intensive scientific computing across High Energy Physics, Earth Observation, and Biology science applications. On 28 February 2003, the first software release of LCG-MW was published. gLite, the Lightweight Middleware for Grid Computing and LCG, Large Hadron Collider Computing Grid, are the cornerstone of the Worldwide LHC Computing Grid, which expanded over time towards the EGI Federation. 2004 marks the year of the first pilot infrastructure, seeing the participation of CERN and data centres in the United Kingdom, Spain, Germany, the Netherlands, France, Canada, Russia, Bulgaria, the Asia-Pacific region and Switzerland. Over the years, the infrastructure has grown into a federation of 128 data centres and 25 cloud providers serving more than 95,000 users worldwide. In 2004, the first data processing tasks started being formally recorded in a central accounting system. The EGI Accounting Portal provides the accounting data for Compute, Storage and Data services gathered from the data centres of the EGI Federation. A few years later, in 2010, EGI was established as the coordinating body of the EGI Federation to build an integrated pan-European infrastructure to support European research communities primarily. In the same year, EGI launched the flagship project EGI Inspire. That project brought together European organisations to establish a sustainable European Grid Infrastructure for large-scale data analysis. The success of the project was due to the adoption of a distributed computing model to solve big data problems. Moreover, EGI-Inspire harmonised operational policies across its federation of affiliated data centres and cloud service providers worldwide, integrating e-infrastructures from 57 countries. The EGI Federation was the first to apply federation to cloud provisioning, opening a new avenue in large-scale interactive data analysis. In 2015, within EGI Engage, opening a new avenue in large-scale interactive data analysis. The EGI Federated Cloud is an IaaS-type cloud, incorporating academic and private clouds and virtualised resources built using open standards. Its development is driven by the needs of the scientific community, resulting in a novel research e-infrastructure that relies on well-established federated operational services, making EGI a dependable resource for scientific endeavours. In 2015, EGI, EUDAT, GÉANT, LIBER and OpenAIRE published a position paper on a 'European Open Science Cloud for Research'. With the EOSC-hub project in 2016, EGI started contributing in practice to shaping the services for the EOSC. The work continued with a series of projects, like EOSC Enhance, EOSC Life and EOSC Synergy. With EGI-ACE and its contribution to EOSC Future, EGI has continued developing the EOSC Core. In early 2024, EGI started providing services to the EOSC EU Node, and with EOSC Beyond it will provide new EOSC Core capabilities and pilot additional national and thematic nodes. In October 2024, EUDAT, GÉANT, OpenAIRE, PRACE and EGI signed a Memorandum of Understanding establishing the European e-Infrastructures Assembly. This collaboration will bolster the position and promote the services of e-Infrastructures, empowering researchers across Europe to drive innovation and advance scientific discovery.
Read more →
Arattai

Arattai Messenger (or simply Arattai) is an encrypted messaging service for instant messaging, voice calls, and video calls, developed by Zoho Corporation. The name Arattai means "chat" or "conversation" in Tamil. The app was soft-launched in January 2021. The app saw a sharp surge in downloads in September 2025, partially fueled by endorsements from Indian government officials. However, the app dropped from the top rankings in October 2025. == History == Arattai was initially tested internally among Zoho employees before being released publicly in early 2021. The launch coincided with a surge in interest for privacy-focused and messaging services, triggered by concerns over WhatsApp's updated terms of service. In September 2025, Arattai experienced a major surge in adoption, with daily sign-ups reportedly increasing 100-fold, from around 3,000 to more than 350,000 in three days. The surge in downloads was attributed to Zoho products being promoted by Indian government officials as part of their Make in India push for homegrown alternatives to foreign‐owned apps, amid deteriorating India–US relations. The growth temporarily strained Zoho's infrastructure, prompting rapid scaling of servers and capacity expansion. During the same period, the app reached the top position in Apple's App Store charts for the "Social Networking" category in India. The app dropped from the top ranking in late October 2025. == Reception == At launch, Arattai was positioned as a potential domestic rival to WhatsApp in India, but analysts noted that it faced challenges with encryption, ecosystem, and network effect. Critics pointed to occasional sync delays.
Read more →
Social media use in the fashion industry

Social media in the fashion industry refers to the use of social media platforms by fashion designers and users to promote and participate in trends. Over the past several decades, the development of social media has increased along with its usage by consumers. The COVID-19 pandemic was a sharp turn of reliance on the virtual sphere for the industry and consumers alike. Social media has created new channels of advertising for fashion houses to reach their target markets. Since its surge in 2009, luxury fashion brands have used social media to build interactions between the brand and its customers to increase awareness and engagement. The emergence of influencers on social media has created a new way of advertising and maintaining customer relationships in the fashion industry. Numerous social media platforms are used to promote fashion trends, with Instagram and TikTok being the most popular among Generation Y and Z. The overall impact of social media in the fashion industry included the creation of online communities, direct communication between industry leaders and consumers, and criticized ideals that are promoted by the industry through social media. == Background == In 2003, at the beginning of social media development, MySpace was founded as a “social networking service.” It allowed people to create a profile, connect with other people, and post videos, pictures, and songs. As MySpace grew in popularity, it attracted interest from companies wishing to promote their brands on the social platform. MySpace is most well known for exposing musicians and artists who made it big in the industry, and companies wanted to capitalize on their popularity by making brand deals. One of MySpace's deals was with Chevrolet, putting on a ‘secret show’. They had a ‘secret’ list of 10 top artists on MySpace, and many artists posted about the show on their accounts. Another brand deal was with Gucci promoting their “Gucci Synch Watch”, which was very successful as Gucci tapped into the youthful audience on MySpace and advertised a sleek, simple, trendy unisex watch. In 2005, YouTube was released and remains one of the most popular social media platforms today. YouTube allows users to upload videos and is free to anyone with access to the internet. It grew in popularity offering a range of videos: vlogs, cooking, health and diet videos, step-by-step tutorials, tutoring help, and more. Much like MySpace, users create accounts and can build a following, often referring to themselves as ‘YouTubers.’ When YouTube grew in popularity, it piqued the interest of brands wanting to partner with YouTube and individual YouTubers. Some brand deals were made by having ads at the beginning of each video, and the YouTuber would make a profit from each view they receive. Some deals are made by individual YouTubers thanking the brand in videos and promoting the brand's products. More recently, YouTube has delved into fashion. While there were always YouTube channels for Vogue and other fashion companies, popular YouTubers have been invited to different fashion shows and have filmed experiences there. Brands are able to target individual YouTubers based on their followers and the target audiences. In 2010, Instagram was launched, which enlarged the scope of fashion advertising. Instagram allows people to post pictures and short videos with the ability to tag different accounts. For brand deals, companies can simply be tagged in a picture instead of creating ads or lines for a user to say. In each picture, users can tag the brands of clothing they were wearing, making it very easy to promote brands. Additionally, Instagram could display ads on users' feed based on other posts the users liked, which used by fashion companies to target their potential customers. Users also use Instagram to promote fashion when they get invited to fashion events. For example, they can take a picture at the event and post it to their Instagram and put their location at the venue and tag the company. During the beginning of the COVID-19 pandemic, companies relied more on social media to keep their public virtually engaged. Fashion companies had virtual fashion shows, creating videos and content about their designs. As social media expands and new platforms come into existence, new ways of advertising are projected to be created. == Uses == === Advertising === Social media is a popular use of advertisement in the fashion industry. Information sharing has expanded due to the growth of social media platforms, which impacts social consumer involvement with fashion brands. Fashion companies use social media platforms to reach customers on emotional levels and stoke engagement with brand images and messages. Researchers in the United Kingdom have demonstrated that engaging with customers with social media messages that express social passion, social tendency, and personal warmth can boost social engagement with fashion brands. In social spheres, fashion is a method for individuals to represent their distinction through clothing. Some people who desire to socially influence others through their fashion and style now have the possibility thanks to social media in the fashion sector. Customers who want to purchase fashion brands frequently follow fashion authorities on social media and heed their recommendations for purchasing fashion products. === Influencers === Companies leveraged celebrities' fame and social standing to advertise their brands, as Tommy Hilfiger did when incorporating social media into their marketing strategy, making Gigi Hadid, who has 15.5 million Instagram followers as of 2016, a brand ambassador. Though recent developments in social media platforms have led to an increase in the awareness of influencers. Influencer marketing has emerged as a fast expanding marketing strategy in various industries as a result of the unheard-of increase in the number of social media influencers' followers. Recently, influencer marketing has received significant attention in the fashion industry. Research shows that influencer marketing may provide a rate of influence that is 11x times greater than that of other conventional advertising channels. Fashion consumers, specifically those in generations Y and Z, may be more influenced by influencers in the context of the fashion industries as they often view them as friends and personal assistants. Fashion influencer marketing on social media platforms have led fashion consumption on social sopping services. One of these social fashion services is LTK (LIKEtoKNOW.it before 2021) where everyday consumers can find and purchase clothing worn by social media fashion influencers (also known as SMFIs). Launched in 2014, LTK has gained a massive following on Instagram (over 3 million) and has 1.3 million registered users on their mobile application. Utilizing SMFIs has led to massive sales within the fashion industry, 80% of visitors of Nordstrom's mobile platform are referred by influencers. Social media fashion influencers try new fashion products, adopt fashion trends and have power in what their audience purchases. Social media fashion influencers gain a following though promoting fashion products, and posting about their lavish lifestyles attained through their higher socioeconomic status. The attractive lifestyles of the influencers influence their followers to mimic their luxurious lifestyle and are allowed to consume the same products through social shopping services. In addition to brands themselves having direct access to social media users, many content creators have great influence over consumers. "Influencers" across all social media platforms have great power when it comes to where people shop and what they purchase. Influencer marketing has become one of the most effective marketing strategies for many fashion brands. These brand deals and creator partnerships are targeted towards Millennial and Gen Z consumers, specifically on Instagram and TikTok, and 74% of consumers have made a purchase simply because an influencer they follow had recommended it. === Trends === The connection between social media and fashion has become common. Influencer marketing has emerged as a necessity and crucial component of advertising. 85% of American businesses are presently using influencer marketing as part of their marketing plan. Wearing fashion brands is a method to show oneself at social gatherings. Through their clothing, people try to demonstrate how distinct they are. Some people who really desire to socially influence others through their fashion and style now have the possibility thanks to social media in the fashion sector. Customers who want to purchase fashion brands frequently follow fashion authorities on social media and heed their recommendations for purchasing fashion products. In January 2021, the Italian fashion house Bottega Veneta deleted all its social media accounts "to lean much more on its ambassadors and fans" to spread the com
Read more →
Control-flow diagram

A control-flow diagram (CFD) is a diagram to describe the control flow of a business process, process or review. Control-flow diagrams were developed in the 1950s, and are widely used in multiple engineering disciplines. They are one of the classic business process modeling methodologies, along with flow charts, drakon-charts, data flow diagrams, functional flow block diagram, Gantt charts, PERT diagrams, and IDEF. == Overview == A control-flow diagram can consist of a subdivision to show sequential steps, with if-then-else conditions, repetition, and/or case conditions. Suitably annotated geometrical figures are used to represent operations, data, or equipment, and arrows are used to indicate the sequential flow from one to another. There are several types of control-flow diagrams, for example: Change-control-flow diagram, used in project management Configuration-decision control-flow diagram, used in configuration management Process-control-flow diagram, used in process management Quality-control-flow diagram, used in quality control. In software and systems development, control-flow diagrams can be used in control-flow analysis, data-flow analysis, algorithm analysis, and simulation. Control and data are most applicable for real time and data-driven systems. These flow analyses transform logic and data requirements text into graphic flows which are easier to analyze than the text. PERT, state transition, and transaction diagrams are examples of control-flow diagrams. == Types of control-flow diagrams == === Process-control-flow diagram === A flow diagram can be developed for the process [control system] for each critical activity. Process control is normally a closed cycle in which a sensor. The application determines if the sensor information is within the predetermined (or calculated) data parameters and constraints. The results of this comparison, which controls the critical component. This [feedback] may control the component electronically or may indicate the need for a manual action. This closed-cycle process has many checks and balances to ensure that it stays safe. It may be fully computer controlled and automated, or it may be a hybrid in which only the sensor is automated and the action requires manual intervention. Further, some process control systems may use prior generations of hardware and software, while others are state of the art. === Performance-seeking control-flow diagram === The figure presents an example of a performance-seeking control-flow diagram of the algorithm. The control law consists of estimation, modeling, and optimization processes. In the Kalman filter estimator, the inputs, outputs, and residuals were recorded. At the compact propulsion-system-modeling stage, all the estimated inlet and engine parameters were recorded. In addition to temperatures, pressures, and control positions, such estimated parameters as stall margins, thrust, and drag components were recorded. In the optimization phase, the operating-condition constraints, optimal solution, and linear-programming health-status condition codes were recorded. Finally, the actual commands that were sent to the engine through the DEEC were recorded.
Read more →