AI Coding Vscode Extension

AI Coding Vscode Extension — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

• 

  ELMo

  ELMo (embeddings from language model) is a word embedding method for representing a sequence of words as a corresponding sequence of vectors. It was created by researchers at the Allen Institute for Artificial Intelligence, and University of Washington and first released in February 2018. It is a bidirectional LSTM which takes character-level as inputs and produces word-level embeddings, trained on a corpus of about 30 million sentences and 1 billion words. The architecture of ELMo accomplishes a contextual understanding of tokens. Deep contextualized word representation is useful for many natural language processing tasks, such as coreference resolution and polysemy resolution. ELMo was historically important as a pioneer of self-supervised generative pretraining followed by fine-tuning, where a large model is trained to reproduce a large corpus, then the large model is augmented with additional task-specific weights and fine-tuned on supervised task data. It was an instrumental step in the evolution towards transformer-based language modelling. == Architecture == ELMo is a multilayered bidirectional LSTM on top of a token embedding layer. The output of all LSTMs concatenated together consists of the token embedding. The input text sequence is first mapped by an embedding layer into a sequence of vectors. Then two parts are run in parallel over it. The forward part is a 2-layered LSTM with 4096 units and 512 dimension projections, and a residual connection from the first to second layer. The backward part has the same architecture, but processes the sequence back-to-front. The outputs from all 5 components (embedding layer, two forward LSTM layers, and two backward LSTM layers) are concatenated and multiplied by a linear matrix ("projection matrix") to produce a 512-dimensional representation per input token. ELMo was pretrained on a text corpus of 1 billion words. The forward part is trained by repeatedly predicting the next token, and the backward part is trained by repeatedly predicting the previous token. After the ELMo model is pretrained, its parameters are frozen, except for the projection matrix, which can be fine-tuned to minimize loss on specific language tasks. This is an early example of the pretraining-fine-tune paradigm. The original paper demonstrated this by improving state of the art on six benchmark NLP tasks. === Contextual word representation === The architecture of ELMo accomplishes a contextual understanding of tokens. For example, the first forward LSTM of ELMo would process each input token in the context of all previous tokens, and the first backward LSTM would process each token in the context of all subsequent tokens. The second forward LSTM would then incorporate those to further contextualize each token. Deep contextualized word representation is useful for many natural language processing tasks, such as coreference resolution and polysemy resolution. For example, consider the sentenceShe went to the bank to withdraw money.In order to represent the token "bank", the model must resolve its polysemy in context. The first forward LSTM would process "bank" in the context of "She went to the", which would allow it to represent the word to be a location that the subject is going towards. The first backward LSTM would process "bank" in the context of "to withdraw money", which would allow it to disambiguate the word as referring to a financial institution. The second forward LSTM can then process "bank" using the representation vector provided by the first backward LSTM, thus allowing it to represent it to be a financial institution that the subject is going towards. == Historical context == ELMo is one link in a historical evolution of language modelling. Consider a simple problem of document classification, where we want to assign a label (e.g., "spam", "not spam", "politics", "sports") to a given piece of text. The simplest approach is the "bag of words" approach, where each word in the document is treated independently, and its frequency is used as a feature for classification. This was computationally cheap but ignored the order of words and their context within the sentence. GloVe and Word2Vec built upon this by learning fixed vector representations (embeddings) for words based on their co-occurrence patterns in large text corpora. Like BERT (but unlike "bag of words" such as Word2Vec and GloVe), ELMo word embeddings are context-sensitive, producing different representations for words that share the same spelling. It was trained on a corpus of about 30 million sentences and 1 billion words. Previously, bidirectional LSTM was used for contextualized word representation. ELMo applied the idea to a large scale, achieving state of the art performance. After the 2017 publication of Transformer architecture, the architecture of ELMo was changed from a multilayered bidirectional LSTM to a Transformer encoder, giving rise to BERT. BERT has a similar pretrain-fine-tune workflow, but uses a Transformer with implications for more parallelizable training.

  Read more →
• 

  Cipher device

  A cipher device was a term used by the US military in the first half of the 20th century to describe a manually operated cipher equipment that converted the plaintext into ciphertext or vice versa. A similar term, cipher machine, was used to describe the cipher equipment that required external power for operation. Cipher box or crypto box is a physical cryptographic device used to encrypt and decrypt messages between plaintext (unencrypted) and ciphertext (encrypted or secret) forms. The ciphertext is suitable for transmission over a channel, such as radio, that might be observed by an adversary the communicating parties wish to conceal the plaintext from.

  Read more →
• 

  Tableau de Concordance

  The Tableau de Concordance was the main French diplomatic code used during World War I; the term also refers to any message sent using the code. It was a superenciphered four-digit code that was changed three times between 1 August 1914 and 15 January 1915. The Tableau de Concordance is considered superenciphered because there is more than one step required to use it. First, each word in a message is replaced by four digits via a codebook. These four digits are divided into three groups (one digit, two digits, one digit) so that when the whole message has been translated into code, the four-digit sets can be put together so it looks like the entire message is made up of two-digit pairs. This is called a "Straddle Gimmick." Then, in turn, each of these two digit pairs (and the single digits at the beginning and end) are replaced by two letters. The letters are then combined with no spaces for the final ciphertext. The manual for the Tableau de Concordance included the instruction that if there was not adequate time for completely enciphering the message, it should simply be sent in clear, because a partially enciphered message would have provided insight into the inner workings of the code.

  Read more →
• 

  Backdoor (computing)

  A backdoor is a typically covert method of bypassing normal authentication or encryption in a computer, product, embedded device (e.g. a home router), or its embodiment (e.g. part of a cryptosystem, algorithm, chipset, or even a "homunculus computer"—a tiny computer-within-a-computer such as that found in Intel's AMT technology). Backdoors are most often used for securing remote access to a computer, or obtaining access to plaintext in cryptosystems. From there it may be used to gain access to privileged information like passwords, corrupt or delete data on hard drives, or transfer information within compromised networks. In the United States, the 1994 Communications Assistance for Law Enforcement Act forces internet providers to provide backdoors for government authorities. In 2024, the U.S. government realized that China had been tapping communications in the U.S. using that infrastructure for months, or perhaps longer; China recorded presidential candidate campaign office phone calls—including employees of the then-vice president of the nation, and of the candidates themselves. A backdoor may take the form of a hidden part of a program, a separate program (e.g. Back Orifice may subvert the system through a rootkit), code in the firmware of the hardware, or parts of an operating system such as Windows, for example, device drivers. Trojan horses can be used to create vulnerabilities in a device. A Trojan horse may appear to be an entirely legitimate program, but when executed, it triggers an activity that may install a backdoor. Although some are secretly installed, other backdoors are deliberate and widely known. These kinds of backdoors have "legitimate" uses such as providing the manufacturer with a way to restore user passwords. Many systems that store information within the cloud fail to create accurate security measures. If many systems are connected within the cloud, hackers can gain access to all other platforms through the most vulnerable system. Default passwords (or other default credentials) can function as backdoors if they are not changed by the user. Some debugging features can also act as backdoors if they are not removed in the release version. In 1993, the United States government attempted to deploy an encryption system, the Clipper chip, with an explicit backdoor for law enforcement and national security access. The chip was unsuccessful. Recent proposals to counter backdoors include creating a database of backdoors' triggers and then using neural networks to detect them. == Overview == The threat of backdoors surfaced when multiuser and networked operating systems became widely adopted. Petersen and Turn discussed computer subversion in a paper published in the proceedings of the 1967 AFIPS Conference. They noted a class of active infiltration attacks that use "trapdoor" entry points into the system to bypass security facilities and permit direct access to data. The use of the word trapdoor here clearly coincides with more recent definitions of a backdoor. However, since the advent of public key cryptography the term trapdoor has acquired a different meaning (see: Trapdoor function), and thus the term "backdoor" is now preferred, only after the term trapdoor went out of use. More generally, such security breaches were discussed at length in a RAND Corporation task force report published under DARPA sponsorship by J.P. Anderson and D.J. Edwards in 1970. While initially targeting the computer vision domain, backdoor attacks have expanded to encompass various other domains, including text, audio, ML-based computer-aided design, and ML-based wireless signal classification. Additionally, vulnerabilities in backdoors have been demonstrated in deep generative models, reinforcement learning (e.g., AI GO), and deep graph models. These broad-ranging potential risks have prompted concerns from national security agencies regarding their potentially disastrous consequences. A backdoor in a login system might take the form of a hard coded user and password combination which gives access to the system. An example of this sort of backdoor was used as a plot device in the 1983 film WarGames, in which the architect of the "WOPR" computer system had inserted a hardcoded password-less account which gave the user access to the system, and to undocumented parts of the system (in particular, a video game-like simulation mode and direct interaction with the artificial intelligence). Although the number of backdoors in systems using proprietary software (software whose source code is not publicly available) is not widely credited, they are nevertheless frequently exposed. Programmers have even succeeded in secretly installing large amounts of benign code as Easter eggs in programs, although such cases may involve official forbearance, if not actual permission. == Examples == === Worms === Many computer worms, such as Sobig and Mydoom, install a backdoor on the affected computer (generally a PC on broadband running Microsoft Windows and Microsoft Outlook). Such backdoors appear to be installed so that spammers can send junk e-mail from the infected machines. Others, such as the Sony/BMG rootkit, placed secretly on millions of music CDs through late 2005, are intended as DRM measures—and, in that case, as data-gathering agents, since both surreptitious programs they installed routinely contacted central servers. A sophisticated attempt to plant a backdoor in the Linux kernel, exposed in November 2003, added a small and subtle code change by subverting the revision control system. In this case, a two-line change appeared to check root access permissions of a caller to the sys_wait4 function, but because it used assignment = instead of equality checking ==, it actually granted permissions to the system. This difference is easily overlooked, and could even be interpreted as an accidental typographical error, rather than an intentional attack. In January 2014, a backdoor was discovered in certain Samsung Android products, like the Galaxy devices. The Samsung proprietary Android versions are fitted with a backdoor that provides remote access to the data stored on the device. In particular, the Samsung Android software that is in charge of handling the communications with the modem, using the Samsung IPC protocol, implements a class of requests known as remote file server (RFS) commands, that allows the backdoor operator to perform via modem remote I/O operations on the device hard disk or other storage. As the modem is running Samsung proprietary Android software, it is likely that it offers over-the-air remote control that could then be used to issue the RFS commands and thus to access the file system on the device. === Object code backdoors === Harder to detect backdoors involve modifying object code, rather than source code—object code is much harder to inspect, as it is designed to be machine-readable, not human-readable. These backdoors can be inserted either directly in the on-disk object code, or inserted at some point during compilation, assembly linking, or loading—in the latter case the backdoor never appears on disk, only in memory. Object code backdoors are difficult to detect by inspection of the object code, but are easily detected by simply checking for changes (differences), notably in length or in checksum, and in some cases can be detected or analyzed by disassembling the object code. Further, object code backdoors can be removed (assuming source code is available) by simply recompiling from source on a trusted system. Thus for such backdoors to avoid detection, all extant copies of a binary must be subverted, and any validation checksums must also be compromised, and source must be unavailable, to prevent recompilation. Alternatively, these other tools (length checks, diff, checksumming, disassemblers) can themselves be compromised to conceal the backdoor, for example detecting that the subverted binary is being checksummed and returning the expected value, not the actual value. To conceal these further subversions, the tools must also conceal the changes in themselves—for example, a subverted checksummer must also detect if it is checksumming itself (or other subverted tools) and return false values. This leads to extensive changes in the system and tools being needed to conceal a single change. As object code can be regenerated by recompiling (reassembling, relinking) the original source code, making a persistent object code backdoor (without modifying source code) requires subverting the compiler itself—so that when it detects that it is compiling the program under attack it inserts the backdoor—or alternatively the assembler, linker, or loader. As this requires subverting the compiler, this in turn can be fixed by recompiling the compiler, removing the backdoor insertion code. This defense can in turn be subverted by putting a source meta-backdoor in the compiler, so that when it detects that it is compiling itself

  Read more →
• 

  Weight initialization

  In deep learning, weight initialization or parameter initialization describes the initial step in creating a neural network. A neural network contains trainable parameters that are modified during training: weight initialization is the pre-training step of assigning initial values to these parameters. The choice of weight initialization method affects the speed of convergence, the scale of neural activation within the network, the scale of gradient signals during backpropagation, and the quality of the final model. Proper initialization is necessary for avoiding issues such as vanishing and exploding gradients and activation function saturation. Note that even though this article is titled "weight initialization", both weights and biases are used in a neural network as trainable parameters, so this article describes how both of these are initialized. Similarly, trainable parameters in convolutional neural networks (CNNs) are called kernels and biases, and this article also describes these. == Constant initialization == We discuss the main methods of initialization in the context of a multilayer perceptron (MLP). Specific strategies for initializing other network architectures are discussed in later sections. For an MLP, there are only two kinds of trainable parameters, called weights and biases. Each layer l {\displaystyle l} contains a weight matrix W ( l ) ∈ R n l − 1 × n l {\displaystyle W^{(l)}\in \mathbb {R} ^{n_{l-1}\times n_{l}}} and a bias vector b ( l ) ∈ R n l {\displaystyle b^{(l)}\in \mathbb {R} ^{n_{l}}} , where n l {\displaystyle n_{l}} is the number of neurons in that layer. A weight initialization method is an algorithm for setting the initial values for W ( l ) , b ( l ) {\displaystyle W^{(l)},b^{(l)}} for each layer l {\displaystyle l} . The simplest form is zero initialization: W ( l ) = 0 , b ( l ) = 0 {\displaystyle W^{(l)}=0,b^{(l)}=0} Zero initialization is usually used for initializing biases, but it is not used for initializing weights, as it leads to symmetry in the network, causing all neurons to learn the same features. In this page, we assume b = 0 {\displaystyle b=0} unless otherwise stated. Recurrent neural networks typically use activation functions with bounded range, such as sigmoid and tanh, since unbounded activation may cause exploding values. (Le, Jaitly, Hinton, 2015) suggested initializing weights in the recurrent parts of the network to identity and zero bias, similar to the idea of residual connections and LSTM with no forget gate. In most cases, the biases are initialized to zero, though some situations can use a nonzero initialization. For example, in multiplicative units, such as the forget gate of LSTM, the bias can be initialized to 1 to allow good gradient signal through the gate. For neurons with ReLU activation, one can initialize the bias to a small positive value like 0.1, so that the gradient is likely nonzero at initialization, avoiding the dying ReLU problem. == Random initialization == Random initialization means sampling the weights from a normal distribution or a uniform distribution, usually independently. === LeCun initialization === LeCun initialization, popularized in (LeCun et al., 1998), is designed to preserve the variance of neural activations during the forward pass. It samples each entry in W ( l ) {\displaystyle W^{(l)}} independently from a distribution with mean 0 and variance 1 / n l − 1 {\displaystyle 1/n_{l-1}} . For example, if the distribution is a continuous uniform distribution, then the distribution is U ( ± 3 / n l − 1 ) {\displaystyle {\mathcal {U}}(\pm {\sqrt {3/n_{l-1}}})} . === Glorot initialization === Glorot initialization (or Xavier initialization) was proposed by Xavier Glorot and Yoshua Bengio. It was designed as a compromise between two goals: to preserve activation variance during the forward pass and to preserve gradient variance during the backward pass. For uniform initialization, it samples each entry in W ( l ) {\displaystyle W^{(l)}} independently and identically from U ( ± 6 / ( n l + 1 + n l − 1 ) ) {\displaystyle {\mathcal {U}}(\pm {\sqrt {6/(n_{l+1}+n_{l-1})}})} . In the context, n l − 1 {\displaystyle n_{l-1}} is also called the "fan-in", and n l + 1 {\displaystyle n_{l+1}} the "fan-out". When the fan-in and fan-out are equal, then Glorot initialization is the same as LeCun initialization. === He initialization === As Glorot initialization performs poorly for ReLU activation, He initialization (or Kaiming initialization) was proposed by Kaiming He et al. for networks with ReLU activation. It samples each entry in W ( l ) {\displaystyle W^{(l)}} from N ( 0 , 2 / n l − 1 ) {\displaystyle {\mathcal {N}}(0,2/n_{l-1})} . === Orthogonal initialization === (Saxe et al. 2013) proposed orthogonal initialization: initializing weight matrices as uniformly random (according to the Haar measure) semi-orthogonal matrices, multiplied by a factor that depends on the activation function of the layer. It was designed so that if one initializes a deep linear network this way, then its training time until convergence is independent of depth. Sampling a uniformly random semi-orthogonal matrix can be done by initializing X {\displaystyle X} by IID sampling its entries from a standard normal distribution, then calculate ( X X ⊤ ) − 1 / 2 X {\displaystyle \left(XX^{\top }\right)^{-1/2}X} or its transpose, depending on whether X {\displaystyle X} is tall or wide. For CNN kernels with odd widths and heights, orthogonal initialization is done this way: initialize the central point by a semi-orthogonal matrix, and fill the other entries with zero. As an illustration, a kernel K {\displaystyle K} of shape 3 × 3 × c × c ′ {\displaystyle 3\times 3\times c\times c'} is initialized by filling K [ 2 , 2 , : , : ] {\displaystyle K[2,2,:,:]} with the entries of a random semi-orthogonal matrix of shape c × c ′ {\displaystyle c\times c'} , and the other entries with zero. (Balduzzi et al., 2017) used it with stride 1 and zero-padding. This is sometimes called the Orthogonal Delta initialization. Related to this approach, unitary initialization proposes to parameterize the weight matrices to be unitary matrices, with the result that at initialization they are random unitary matrices (and throughout training, they remain unitary). This is found to improve long-sequence modelling in LSTM. Orthogonal initialization has been generalized to layer-sequential unit-variance (LSUV) initialization. It is a data-dependent initialization method, and can be used in convolutional neural networks. It first initializes weights of each convolution or fully connected layer with orthonormal matrices. Then, proceeding from the first to the last layer, it runs a forward pass on a random minibatch, and divides the layer's weights by the standard deviation of its output, so that its output has variance approximately 1. === Fixup initialization === In 2015, the introduction of residual connections allowed very deep neural networks to be trained, much deeper than the ~20 layers of the previous state of the art (such as the VGG-19). Residual connections gave rise to their own weight initialization problems and strategies. These are sometimes called "normalization-free" methods, since using residual connection could stabilize the training of a deep neural network so much that normalizations become unnecessary. Fixup initialization is designed specifically for networks with residual connections and without batch normalization, as follows: Initialize the classification layer and the last layer of each residual branch to 0. Initialize every other layer using a standard method (such as He initialization), and scale only the weight layers inside residual branches by L − 1 2 m − 2 {\displaystyle L^{-{\frac {1}{2m-2}}}} . Add a scalar multiplier (initialized at 1) in every branch and a scalar bias (initialized at 0) before each convolution, linear, and element-wise activation layer. Similarly, T-Fixup initialization is designed for Transformers without layer normalization. === Others === Instead of initializing all weights with random values on the order of O ( 1 / n ) {\displaystyle O(1/{\sqrt {n}})} , sparse initialization initialized only a small subset of the weights with larger random values, and the other weights zero, so that the total variance is still on the order of O ( 1 ) {\displaystyle O(1)} . Random walk initialization was designed for MLP so that during backpropagation, the L2 norm of gradient at each layer performs an unbiased random walk as one moves from the last layer to the first. Looks linear initialization was designed to allow the neural network to behave like a deep linear network at initialization, since W R e L U ( x ) − W R e L U ( − x ) = W x {\displaystyle W\;\mathrm {ReLU} (x)-W\;\mathrm {ReLU} (-x)=Wx} . It initializes a matrix W {\displaystyle W} of shape R n 2 × m {\displaystyle \mathbb {R} ^{{\frac {n}{2}}\times m}} by any method, such as orthogonal initialization, t

  Read more →
• 

  Master/Session

  In cryptography, Master/Session is a key management scheme in which a pre-shared Key Encrypting Key (called the "Master" key) is used to encrypt a randomly generated and insecurely communicated Working Key (called the "Session" key). The Working Key is then used for encrypting the data to be exchanged. Its advantage is simplicity, but it suffers the disadvantage of having to communicate the pre-shared Key Exchange Key, which can be difficult to update in the event of compromise. The Master/Session technique was created in the days before asymmetric techniques, such as Diffie-Hellman, were invented. This technique still finds widespread use in the financial industry, and is routinely used between corporate parties such as issuers, acquirers, switches. Its use in device communications (such as PIN pads), however, is in decline given the advantages of techniques such as DUKPT.

  Read more →
• 

  Backup

  In information technology, a backup, or data backup is a copy of computer data taken and stored elsewhere so that it may be used to restore the original after a data loss event. The verb form, referring to the process of doing so, is "back up", whereas the noun and adjective form is "backup". Backups can be used to recover data after its loss from data deletion or corruption, or to recover data from an earlier time. Backups provide a simple form of IT disaster recovery; however not all backup systems are able to reconstitute a computer system or other complex configuration such as a computer cluster, active directory server, or database server. A backup system contains at least one copy of all data considered worth saving. The data storage requirements can be large. An information repository model may be used to provide structure to this storage. There are different types of data storage devices used for copying backups of data that is already in secondary storage onto archive files. There are also different ways these devices can be arranged to provide geographic dispersion, data security, and portability. Data is selected, extracted, and manipulated for storage. The process can include methods for dealing with live data, including open files, as well as compression, encryption, and de-duplication. Additional techniques apply to enterprise client-server backup. Backup schemes may include dry runs that validate the reliability of the data being backed up. There are limitations and human factors involved in any backup scheme. == Storage == A backup strategy requires an information repository, "a secondary storage space for data" that aggregates backups of data "sources". The repository could be as simple as a list of all backup media (DVDs, etc.) and the dates produced, or could include a computerized index, catalog, or relational database. === 3-2-1 Backup Rule === The backup data needs to be stored, requiring a backup rotation scheme, which is a system of backing up data to computer media that limits the number of backups of different dates retained separately, by appropriate re-use of the data storage media by overwriting of backups no longer needed. The scheme determines how and when each piece of removable storage is used for a backup operation and how long it is retained once it has backup data stored on it. The 3-2-1 rule can aid in the backup process. It states that there should be at least 3 copies of the data, stored on 2 different types of storage media, and one copy should be kept offsite, in a remote location (this can include cloud storage). 2 or more different media should be used to eliminate data loss due to similar reasons (for example, optical discs may tolerate being underwater while LTO tapes may not, and SSDs cannot fail due to head crashes or damaged spindle motors since they do not have any moving parts, unlike hard drives). An offsite copy protects against fire, theft of physical media (such as tapes or discs) and natural disasters like floods and earthquakes. Physically protected hard drives are an alternative to an offsite copy, but they have limitations like only being able to resist fire for a limited period of time, so an offsite copy still remains as the ideal choice. Because there is no perfect storage, many backup experts recommend maintaining a second copy on a local physical device, even if the data is also backed up offsite. === Backup methods === ==== Unstructured ==== An unstructured repository may simply be a stack of tapes, DVD-Rs or external HDDs with minimal information about what was backed up and when. This method is the easiest to implement, but unlikely to achieve a high level of recoverability as it lacks automation. ==== Full only/System imaging ==== A repository using this backup method contains complete source data copies taken at one or more specific points in time. Copying system images, this method is frequently used by computer technicians to record known good configurations. However, imaging is generally more useful as a way of deploying a standard configuration to many systems rather than as a tool for making ongoing backups of diverse systems. ==== Incremental ==== An incremental backup stores data changed since a reference point in time. Duplicate copies of unchanged data are not copied. Typically a full backup of all files is made once or at infrequent intervals, serving as the reference point for an incremental repository. Subsequently, a number of incremental backups are made after successive time periods. Restores begin with the last full backup and then apply the incrementals. Some backup systems can create a synthetic full backup from a series of incrementals, thus providing the equivalent of frequently doing a full backup. When done to modify a single archive file, this speeds restores of recent versions of files. ==== Near-CDP ==== Continuous Data Protection (CDP) refers to a backup that instantly saves a copy of every change made to the data. This allows restoration of data to any point in time and is the most comprehensive and advanced data protection. Near-CDP backup applications—often marketed as "CDP"—automatically take incremental backups at a specific interval, for example every 15 minutes, one hour, or 24 hours. They can therefore only allow restores to an interval boundary. Near-CDP backup applications use journaling and are typically based on periodic "snapshots", read-only copies of the data frozen at a particular point in time. Near-CDP (except for Apple Time Machine) intent-logs every change on the host system, often by saving byte or block-level differences rather than file-level differences. This backup method differs from simple disk mirroring in that it enables a roll-back of the log and thus a restoration of old images of data. Intent-logging allows precautions for the consistency of live data, protecting self-consistent files but requiring applications "be quiesced and made ready for backup." Near-CDP is more practicable for ordinary personal backup applications, as opposed to true CDP, which must be run in conjunction with a virtual machine or equivalent and is therefore generally used in enterprise client-server backups. Software may create copies of individual files such as written documents, multimedia projects, or user preferences, to prevent failed write events caused by power outages, operating system crashes, or exhausted disk space, from causing data loss. A common implementation is an appended ".bak" extension to the file name. ==== Reverse incremental ==== A Reverse incremental backup method stores a recent archive file "mirror" of the source data and a series of differences between the "mirror" in its current state and its previous states. A reverse incremental backup method starts with a non-image full backup. After the full backup is performed, the system periodically synchronizes the full backup with the live copy, while storing the data necessary to reconstruct older versions. This can either be done using hard links—as Apple Time Machine does, or using binary diffs. ==== Differential ==== A differential backup saves only the data that has changed since the last full backup. This means a maximum of two backups from the repository are used to restore the data. However, as time from the last full backup (and thus the accumulated changes in data) increases, so does the time to perform the differential backup. Restoring an entire system requires starting from the most recent full backup and then applying just the last differential backup. A differential backup copies files that have been created or changed since the last full backup, regardless of whether any other differential backups have been made since, whereas an incremental backup copies files that have been created or changed since the most recent backup of any type (full or incremental). Changes in files may be detected through a more recent date/time of last modification file attribute, and/or changes in file size. Other variations of incremental backup include multi-level incrementals and block-level incrementals that compare parts of files instead of just entire files. === Storage media === Regardless of the repository model that is used, the data has to be copied onto an archive file data storage medium. The medium used is also referred to as the type of backup destination. ==== Magnetic tape ==== Magnetic tape was for a long time the most commonly used medium for bulk data storage, backup, archiving, and interchange. It was previously a less expensive option, but this is no longer the case for smaller amounts of data. Tape is a sequential access medium, so the rate of continuously writing or reading data can be very fast. While tape media itself has a low cost per space, tape drives are typically dozens of times as expensive as hard disk drives and optical drives. Tape media are generally rotated on a schedule so at least one set is off-site in case something should happe

  Read more →
• 

  Semi-Automatic Ground Environment

  The Semi-Automated Ground Environment (SAGE) was a system of large computers and associated networking equipment that coordinated data from many radar sites and processed it to produce a single unified image of the airspace over a wide area. SAGE directed and controlled the NORAD response to a possible Soviet air attack, operating in this role from the late 1950s into the 1980s. The processing power behind SAGE was supplied by the largest discrete component-based computer ever built, the AN/FSQ-7, manufactured by IBM. Each SAGE Direction Center (DC) housed an FSQ-7 which occupied an entire floor, approximately 22,000 square feet (2,000 m2) not including supporting equipment. The FSQ-7 was actually two computers, "A" side and "B" side. Computer processing was switched from "A" side to "B" side on a regular basis, allowing maintenance on the unused side. Information was fed to the DCs from a network of radar stations as well as readiness information from various defense sites. The computers, based on the raw radar data, developed "tracks" for the reported targets, and automatically calculated which defenses were within range. Operators used light guns to select targets on-screen for further information, select one of the available defenses, and issue commands to attack. These commands would then be automatically sent to the defense site via teleprinter. Connecting the various sites was an enormous network of telephones, modems and teleprinters. Later additions to the system allowed SAGE's tracking data to be sent directly to CIM-10 Bomarc missiles and some of the US Air Force's interceptor aircraft in-flight, directly updating their autopilots to maintain an intercept course without operator intervention. Each DC also forwarded data to a Combat Center (CC) for "supervision of the several sectors within the division" ("each combat center [had] the capability to coordinate defense for the whole nation"). SAGE became operational in the late 1950s and early 1960s at an estimated total cost between 8 and 12 billion dollars, four times the cost of the Manhattan Project. Throughout its development, there were continual concerns about its real ability to deal with large attacks, and the Operation Sky Shield tests showed that only about one-fourth of enemy bombers would have been intercepted. Nevertheless, SAGE was the backbone of NORAD's air defense system into the 1980s, by which time the tube-based FSQ-7s were increasingly costly to maintain and completely outdated. Today the same command and control task is carried out by microcomputers, based on the same basic underlying data. == Background == === Earlier systems === Just prior to World War II, Royal Air Force (RAF) tests with the new Chain Home (CH) radars had demonstrated that relaying information to the fighter aircraft directly from the radar sites was not feasible. The radars determined the map coordinates of the enemy, but could generally not see the fighters at the same time. This meant the fighters had to be able to determine where to fly to perform an interception but were often unaware of their own exact location and unable to calculate an interception while also flying their aircraft. The solution was to send all of the radar information to a central control station where operators collated the reports into single tracks, and then reported these tracks to the airbases, or sectors. The sectors used additional systems to track their own aircraft, plotting both on a single large map. Operators viewing the map could then see what direction their fighters would have to fly to approach their targets and relay that simply by telling them to fly along a certain heading or vector. This Dowding system was the first ground-controlled interception (GCI) system of large scale, covering the entirety of the UK. It proved enormously successful during the Battle of Britain, and is credited as being a key part of the RAF's success. The system was slow, often providing information that was up to five minutes out of date. Against propeller driven bombers flying at perhaps 225 miles per hour (362 km/h) this was not a serious concern, but it was clear the system would be of little use against jet-powered bombers flying at perhaps 600 miles per hour (970 km/h). The system was extremely expensive in manpower terms, requiring hundreds of telephone operators, plotters and trackers in addition to the radar operators. This was a serious drain on manpower, making it difficult to expand the network. The idea of using a computer to handle the task of taking reports and developing tracks had been explored beginning late in the war. By 1944, analog computers had been installed at the CH stations to automatically convert radar readings into map locations, eliminating two people. Meanwhile, the Royal Navy began experimenting with the Comprehensive Display System (CDS), another analog computer that took X and Y locations from a map and automatically generated tracks from repeated inputs. Similar systems began development with the Royal Canadian Navy, DATAR, and the US Navy, the Naval Tactical Data System (NTDS). A similar system was also specified for the Nike SAM project, specifically referring to a US version of CDS, coordinating the defense over a battle area so that multiple batteries did not fire on a single target. All of these systems were relatively small in geographic scale, generally tracking within a city-sized area. === Valley Committee === When the Soviet Union tested its first atomic bomb in August 1949, the topic of air defense of the US became important for the first time. A study group, the "Air Defense Systems Engineering Committee", was set up under the direction of Dr. George Valley to consider the problem and is known to history as the "Valley Committee". Their December report noted a key problem in air defense using ground-based radars. A bomber approaching a radar station would detect the signals from the radar long before the reflection off the bomber was strong enough to be detected by the station. The committee suggested that when this occurred, the bomber would descend to low altitude, thereby greatly limiting the radar horizon, allowing the bomber to fly past the station undetected. Although flying at low altitude greatly increased fuel consumption, the team calculated that the bomber would only need to do this for about 10% of its flight, making the fuel penalty acceptable. The only solution to this problem was to build a huge number of stations with overlapping coverage. At that point the problem became one of managing the information. Manual plotting was ruled out as too slow, and a computerized solution was the only possibility. To handle this task, the computer would need to be fed information directly, eliminating any manual translation by phone operators, and it would have to be able to analyze that information and automatically develop tracks. A system tasked with defending cities against the predicted future Soviet bomber fleet would have to be dramatically more powerful than the models used in the NTDS or DATAR. The Committee then had to consider whether or not such a computer was possible. The Valley Committee was introduced to Jerome Wiesner, associate director of the Research Laboratory of Electronics at MIT. Wiesner noted that the Servomechanisms Laboratory had already begun development of a machine that might be fast enough. This was the Whirlwind I, originally developed for the Office of Naval Research as a general purpose flight simulator that could simulate any current or future aircraft by changing its software. Wiesner introduced the Valley Committee to Whirlwind's project lead, Jay Forrester, who convinced him that Whirlwind was sufficiently capable. In September 1950, an early microwave early-warning radar system at Hanscom Field was connected to Whirlwind using a custom interface developed by Forrester's team. An aircraft was flown past the site, and the system digitized the radar information and successfully sent it to Whirlwind. With this demonstration, the technical concept was proven. Forrester was invited to join the committee. === Project Charles === With this successful demonstration, Louis Ridenour, chief scientist of the Air Force, wrote a memo stating "It is now apparent that the experimental work necessary to develop, test, and evaluate the systems proposals made by ADSEC will require a substantial amount of laboratory and field effort." Ridenour approached MIT President James Killian with the aim of beginning a development lab similar to the war-era Radiation Laboratory that made enormous progress in radar technology. Killian was initially uninterested, desiring to return the school to its peacetime civilian charter. Ridenour eventually convinced Killian the idea was sound by describing the way the lab would lead to the development of a local electronics industry based on the needs of the lab and the students who would leave the lab to start their

  Read more →
• 

  Hierarchical navigable small world

  Hierarchical navigable small world (HNSW) is an algorithm for approximate nearest neighbor search. It is used to find items that are similar to a query item in a large collection, without comparing the query with every item one by one. The algorithm is commonly used for searching vector data. In these systems, an item such as a document, image, song, or user profile is represented by a list of numbers called a vector. Items with similar vectors are treated as similar according to the model that produced the vectors. HNSW provides a way to search these vectors quickly, especially in large datasets. HNSW stores vectors in a graph. Each vector is a node, and links connect it to some nearby vectors. The graph has several layers: upper layers contain fewer nodes and act like a rough map, while the bottom layer contains all nodes and gives a more detailed view. A search starts in an upper layer, follows links toward nodes that are closer to the query, and then repeats the process in lower layers until it finds a set of likely nearest neighbors. == Background == The nearest neighbor search problem asks which items in a dataset are closest to a query item. A direct search can compare the query with every item in the dataset, but this becomes slow when the dataset is large. Exact search methods based on spatial trees, such as the k-d tree and R-tree, can also become less effective for high-dimensional data, a problem often associated with the curse of dimensionality. Approximate nearest neighbor methods trade some exactness for speed or lower resource use. Instead of always guaranteeing the exact closest item, they try to return close items quickly. Other approximate methods include locality-sensitive hashing and product quantization. HNSW builds on research into small-world networks and navigable graphs. In a small-world graph, most nodes can be reached from other nodes through a short chain of links. In a navigable graph, a search procedure can use local information to move toward a target. Jon Kleinberg's work on navigation in small-world networks is an important example of this research area. Later work studied ways to add links that make graphs easier to navigate greedily. The HNSW algorithm extends earlier navigable small world methods for similarity search by adding a hierarchy of graph layers. This hierarchy helps the algorithm find a good region of the graph before doing a more detailed search in the bottom layer. == Algorithm == HNSW is based on a proximity graph. In this graph, nearby vectors are connected by edges. The algorithm uses these edges to move through the dataset, rather than scanning every vector. The graph is hierarchical. Every vector appears in the bottom layer. Some vectors are also placed in higher layers, with fewer vectors appearing as the layers go upward. The upper layers allow long-range movement across the dataset, while the lower layers allow a more detailed search near promising candidates. A typical search proceeds as follows: The search begins from an entry point in the highest layer. At each step, the algorithm looks at neighboring nodes and moves to a neighbor that is closer to the query. When it cannot find a closer neighbor in that layer, it moves down to the next layer. In the bottom layer, it explores a wider set of candidate nodes and returns the nearest candidates found. This search strategy is often described as greedy navigation. The algorithm repeatedly chooses locally better nodes, using the graph structure to approach the query point. == Construction and parameters == The HNSW graph is built incrementally. When a new vector is inserted, the algorithm assigns it a maximum layer, searches for nearby existing nodes, and connects the new node to selected neighbors in each layer where it appears. Implementations usually expose parameters that control the trade-off between speed, accuracy, memory use, and construction time. A higher number of graph connections can improve recall but requires more memory. A larger search candidate list can improve accuracy but makes queries slower. A larger construction candidate list can improve the quality of the graph but makes index building slower. Because HNSW is approximate, its results are not always identical to a full exact search. Its practical performance depends on the dataset, distance measure, implementation, and parameter settings. Benchmarking studies have found HNSW-based libraries to be strong performers among approximate nearest neighbor methods, although worst-case performance can differ from performance on common benchmark datasets. == Use in vector search systems == HNSW is used as an index in systems that store and search high-dimensional vectors. These systems include vector databases, search engines, and database extensions. Typical uses include semantic search, recommender systems, image similarity search, and retrieval-augmented generation. Several software projects implement or support HNSW. Libraries include hnswlib, which is associated with the original HNSW authors, and FAISS. Database and search systems that document HNSW support include Apache Lucene, Chroma, ClickHouse, DuckDB, MariaDB, Milvus, pgvector, Qdrant, and Redis.

  Read more →
• 

  Instagram face

  Instagram face is a beauty standard based on the filters and influencers popular on Instagram. == Overview == An "Instagram face" has catlike eyes, long lashes, a small nose, high cheekbones, full lips, and a blank expression. Digital filters manipulate photographs and video to create an idealized image that, according to critics, has resulted in an unrealistic and homogeneous beauty standard. According to Jia Tolentino, the face is "distinctly white but ambiguously ethnic". The face has been described as a racial composite of different peoples. In 2024, cosmetic surgeon Paul Banwell said, "People used to come to see me asking to look like a particular celebrity, but many patients come to me now wanting to look like the filtered version of themselves." While based on digital filters, the look is achieved in person using heavy applications of makeup or cosmetic surgery. Plastic surgery, Botox injections, and injectable filler have significantly increased in popularity since the rise of digital filters. Influencers market makeup products designed to recreate the look. == History == The growth of reality television series and social media throughout the 2010s has influenced the popularity of Instagram face. In 2019, The New Yorker referred to this phenomenon as "Instagram Face," identifying Kim Kardashian as its "patient zero." Similarly, her younger sister Kylie Jenner significantly impacted the trend with her 2015 lip filler confession, which acted as a catalyst, introducing Juvéderm to a new generation. Sirin Kale of Vice News has described Jenner as "at the vanguard of an aesthetic that’s swept through British towns and cities," while also pointing towards other celebrities such as Iggy Azalea and Farrah Abraham. In 2018, Americans underwent 7 million neurotoxin injections and 2.5 million filler injections and spent $16.5 billion on cosmetic surgery. 92% of the latter was performed on women. Botox usage has also been on the rise. == Criticism == In her 2021 book The Selfie, Temporality, and Contemporary Photography, Claire Raymond of Princeton University criticised "Instagram faces" for erasing "heritable quirks and lived history; it erases what makes the human face so compelling, whether conventionally beautiful or not," while also arguing that the procedures used to create Instagram faces "numb and freeze the face and skin, rendering less mobile the lips, the eyes, and the neck. Numbness is the central feature of the experience for the woman who gets Instagram face through cosmetic procedures. Others may see her more, but she feels less and less." == Influence on popular culture == The increasing popularity of cosmetic surgeries towards a homogeneous ideal has resulted in the emergence of the "goopcore" sub-genre of body horror. The sub-genre combines graphic violence with body modifications from the beauty industry. Allie Rowbottom's goopcore novel Aesthetica centers around an influencer attempting to undo years of plastic surgery with a new experimental procedure.

  Read more →
• 

  Data governance

  Data governance is a term used on both a macro and a micro level. The former is a political concept and forms part of international relations and Internet governance; the latter is a data management concept and forms part of corporate/organizational data governance. Data governance involves delegating authority over data and exercising that authority through decision-making processes. It plays a role in enhancing the value of data assets. == Macro level == Data governance at the macro level involves regulating cross-border data flows among countries, which is more precisely termed international data governance. This field was first formed in the early 2000s, and consists of "norms, principles and rules governing various types of data." There have been several international groups established by research organizations that aim to grant access to their data. These groups that enable an exchange of data are, as a result, exposed to domestic and international legal interpretations that ultimately decide how data is used. However, as of 2023, there are no international laws or agreements specifically focused on data protection. == Data governance (Data Management) == Data governance is the set of principles, policies, and processes that guide the effective and responsible use of data within an organization. It creates a framework for decision making, accountability, and oversight across the data lifecycle, from creation and storage to sharing and disposal. Data governance is closely linked with data management, which provides the practical methods to carry out governance objectives. These methods include data quality assurance, metadata management, master data management, security controls, and compliance monitoring. Together, governance and management aim to maximize the value of data as a strategic asset, reduce risks from misuse or inaccuracy, and ensure compliance with regulatory, ethical, and business requirements. The importance of this discipline has grown with the rise of big data, cloud computing, and artificial intelligence, where consistent standards and stewardship are essential for privacy protection, interoperability, and informed decision making. == Data governance drivers == While data governance initiatives can be driven by a desire to improve data quality, they are often driven by C-level leaders responding to external regulations. In a recent report conducted by the CIO WaterCooler community, 54% stated the key driver was efficiencies in processes; 39% - regulatory requirements; and only 7% customer service. Examples of these regulations include Sarbanes–Oxley Act, Basel I, Basel II, HIPAA, GDPR, cGMP, and a number of data privacy regulations. To achieve compliance with these regulations, business processes and controls require formal management processes to govern the data subject to these regulations. Successful programs identify drivers that are meaningful to both supervisory and executive leadership. Common themes among the external regulations center on the need to manage risk. The risks can be financial misstatement, inadvertent release of sensitive data, or poor data quality for key decisions. Methods to manage these risks vary from industry to industry. Examples of commonly referenced best practices and guidelines include COBIT, ISO/IEC 38500, and others. The proliferation of regulations and standards creates challenges for data governance professionals, particularly when multiple regulations overlap the data being managed. Organizations often launch data governance initiatives to address these challenges. == Data governance initiatives (Dimensions) == Data governance initiatives improve the quality of data by assigning a team responsible for data's accuracy, completeness, consistency, timeliness, validity, and uniqueness. This team usually consists of executive leadership, project management, line-of-business managers, and data stewards. The team usually employs a methodology for tracking and improving enterprise data, such as Six Sigma, and tools for data mapping, profiling, cleansing, and monitoring data. Data governance initiatives may be aimed at achieving a number of objectives including offering better visibility to internal and external customers (such as supply chain management), compliance with regulatory law, improving operations after rapid company growth or corporate mergers, or to aid the efficiency of enterprise knowledge workers by reducing confusion and error and increasing their scope of knowledge. Many data governance initiatives are also inspired by past attempts to fix information quality at the departmental level, which can lead to incongruent and redundant data quality processes. Most large companies have many applications and databases that can not easily share information. Therefore, knowledge workers within large organizations may not have access to the data they need to best do their jobs. When they do have access to the data, the data quality may be poor. By setting up a data governance practice or corporate data authority (individual or area responsible for determining how to proceed, in the best interest of the business, when a data issue arises), these problems can be mitigated. == Implementation == Implementation of a data governance initiative may vary in scope as well as origin. Sometimes, an executive mandate will arise to initiate an enterprise-wide effort. Sometimes the mandate will be to create a pilot project or projects, limited in scope and objectives, aimed at either resolving existing issues or demonstrating value. Sometimes, an initiative originates from lower down in the organization's hierarchy and will be deployed in a limited scope to demonstrate value to potential sponsors higher up in the organization. The initial scope of an implementation can vary greatly as well, from review of a one-off IT system to a cross-organization initiative. == Data governance tools == Leaders of successful data governance programs declared at the Data Governance Conference in Orlando, FL, in December 2006, that data governance is about 80 to 95 percent communication. That stated, it is a given that many of the objectives of a data governance program must be accomplished with appropriate tools. Many vendors are now positioning their products as data governance tools. Due to the different focus areas of various data governance initiatives, a given tool may or may not be appropriate. Additionally, many tools that are not marketed as governance tools address governance needs and demands.

  Read more →
• 

  Instant messaging

  Instant messaging (IM) technology is a type of synchronous computer-mediated communication involving the immediate (real-time) transmission of messages between two or more parties over the Internet or another computer network. Originally involving simple text message exchanges, modern instant messaging applications and services (also variously known as instant messenger, messaging app, chat app, chat client, or simply a messenger) tend to also feature the exchange of multimedia, emojis, file transfer, VoIP (voice calling), and video chat capabilities. Instant messaging systems facilitate connections between specified known users (often using a contact list also known as a "buddy list" or "friend list") or in chat rooms, and can be standalone apps or integrated into a wider social media platform, or in a website where it can, for instance, be used for conversational commerce. Originally the term "instant messaging" was distinguished from "text messaging" by being run on a computer network instead of a cellular/mobile network, being able to write longer messages, real-time communication, presence ("status"), and being free (only cost of access instead of per SMS message sent). Instant messaging was pioneered in the early Internet era; the IRC protocol was the earliest to achieve wide adoption. Later in the 1990s, ICQ was among the first closed and commercialized instant messengers, and several rival services appeared afterwards as it became a popular use of the Internet. Beginning with its first introduction in 2005, BlackBerry Messenger became the first popular example of mobile-based IM, combining features of traditional IM and mobile SMS. Instant messaging remains very popular today; IM apps are the most widely used smartphone apps: in 2018 for instance there were 980 million monthly active users of WeChat and 1.3 billion monthly users of WhatsApp, the largest IM network. == Overview == Instant messaging (IM), sometimes also called "messaging" or "texting", consists of computer-based human communication between two users (private messaging) or more (chat room or "group") in real-time, allowing immediate receipt of acknowledgment or reply. This is in direct contrast to email, where conversations are not in real-time, and the perceived quasi-synchrony of the communications by the users (although many systems allow users to send offline messages that the other user receives when logging in). Earlier IM networks were limited to text-based communication, not dissimilar to mobile text messaging. As technology has moved forward, IM has expanded to include voice calling using a microphone, videotelephony using webcams, file transfer, location sharing, image and video transfer, voice notes, and other features. IM is conducted over the Internet or other types of networks (see also LAN messenger). Depending on the IM protocol, the technical architecture can be peer-to-peer (direct point-to-point transmission) or client–server (when all clients have to first connect to the central server). Primary IM services are controlled by their corresponding companies and usually follow the client-server model. At one point, the term "Instant Messenger" was a service mark of AOL Time Warner and could not be used in software not affiliated with AOL in the United States. For this reason, in April 2007, the instant messaging client formerly named Gaim (or gaim) announced that they would be renamed "Pidgin". === Clients === Modern IM services generally provide their own client, either a separately installed application or a browser-based client. They are normally centralised networks run by the servers of the platform's operators, unlike peer-to-peer protocols like XMPP. These usually only work within the same IM network, although some allow limited function with other services (see #Interoperability). Third-party client software applications exist that will connect with most of the major IM services. There is the class of instant messengers that uses the serverless model, which doesn't require servers, and the IM network consists only of clients. There are several serverless messengers: RetroShare, Tox, Bitmessage, Ricochet. See also: LAN messenger. Some examples of popular IM services today include Signal, Telegram, WhatsApp Messenger, WeChat, QQ Messenger, Viber, Line, and Snapchat. The popularity of certain apps greatly differ between different countries. Certain apps have an emphasis on certain uses - for example, Skype focuses on video calling, Slack focuses on messaging and file sharing for work teams, and Snapchat focuses on image messages. Some social networking services offer messaging services as a component of their overall platform, such as Facebook's Facebook Messenger, who also own WhatsApp. Others have a direct IM function as an additional adjunct component of their social networking platforms, like Instagram, Reddit, Tumblr, TikTok, Clubhouse and Twitter; this also includes for example dating websites, such as OkCupid or Plenty of Fish, and online gaming chat platforms. === Features === ==== Private and group messaging ==== Private chat allows users to converse privately with another person or a group. Privacy can also be enhanced in several ways, such as end-to-end encryption by default. Public and group chat features allow users to communicate with multiple people simultaneously. ==== Calling ==== Many major IM services and applications offer a call feature for user-to-user voice calls, conference calls, and voice messages. The call functionality is useful for professionals who utilize the application for work purposes and as a hands-free method. Videotelephony using a webcam is also possible by some. ==== Games and entertainment ==== Some IM applications include in-app games for entertainment. Yahoo! Messenger, for example, introduced these where users could play a game and viewed by friends in real-time. MSN Messenger featured a number of playable games within the interface. Facebook's Messenger has had a built-in option to play games with people in a chat, including games like Tetris and Blackjack. Discord features multiple games built inside the "activities" tab in voice channels. ==== Payments ==== A relatively new feature to instant messaging, peer-to-peer payments are available for financial tasks on top of communication. The lack of a service fee also makes these advantageous to financial applications. IM services such as Facebook Messenger and the WeChat 'super-app' for example offer a payment feature. == History == === Early systems === Though the term dates from the 1990s, instant messaging predates the Internet, first appearing on multi-user operating systems like Compatible Time-Sharing System (CTSS) and Multiplexed Information and Computing Service (Multics) in the mid-1960s. Initially, some of these systems were used as notification systems for services like printing, but quickly were used to facilitate communication with other users logged into the same machine. CTSS facilitated communication via text message for up to 30 people. Parallel to instant messaging were early online chat facilities, the earliest of which was Talkomatic (1973) on the PLATO system, which allowed 5 people to chat simultaneously on a 512 x 512 plasma display (5 lines of text + 1 status line per person). During the bulletin board system (BBS) phenomenon that peaked during the 1980s, some systems incorporated chat features which were similar to instant messaging; Freelancin' Roundtable was one prime example. The first such general-availability commercial online chat service (as opposed to PLATO, which was educational) was the CompuServe CB Simulator in 1980, created by CompuServe executive Alexander "Sandy" Trevor in Columbus, Ohio. As networks developed, the protocols spread with the networks. Some of these used a peer-to-peer protocol (e.g. talk, ntalk and ytalk), while others required peers to connect to a server (see talker and IRC). The Zephyr Notification Service (still in use at some institutions) was invented at MIT's Project Athena in the 1980s to allow service providers to locate and send messages to users. Early instant messaging programs were primarily real-time text, where characters appeared as they were typed. This includes the Unix "talk" command line program, which was popular in the 1980s and early 1990s. Some BBS chat programs (i.e. Celerity BBS) also used a similar interface. Modern implementations of real-time text also exist in instant messengers, such as AOL's Real-Time IM as an optional feature. In the latter half of the 1980s and into the early 1990s, the Quantum Link online service for Commodore 64 computers offered user-to-user messages between concurrently connected customers, which they called "On-Line Messages" (or OLM for short), and later "FlashMail." Quantum Link later became America Online and made AOL Instant Messenger (AIM, discussed later). While the Quantum Link client software ran on a Commodore 64, using only

  Read more →
• 

  WebGPU Shading Language

  WebGPU Shading Language (WGSL, internet media type: text/wgsl) is a high-level shading language and the normative shader language for the WebGPU API on the web. WGSL's syntax is influenced by Rust and is designed with strong static validation, explicit resource binding, and portability in mind for secure execution in browsers. In web contexts, WebGPU implementations accept WGSL source and perform compilation to platform-specific intermediate forms (for example, to SPIR‑V, DXIL, or MSL via the user agent), but such backends are not exposed to web content. == History and background == Graphics on the web historically used WebGL, with shaders written in GLSL ES. As applications demanded more modern GPU features and finer control over compute and graphics pipelines, the W3C's GPU for the Web Community Group and Working Group created WebGPU and its companion shading language, WGSL, to provide a secure, portable model suitable for the web platform. WGSL was developed to be human-readable, avoid undefined behavior common in legacy shading languages, and align closely with WebGPU's resource and validation model. == Design goals == WGSL's design emphasizes: Safety and determinism suitable for web security constraints (extensive static validation and well-defined semantics). Portability across diverse GPU backends via an abstract resource model shared with WebGPU. Readability and explicitness (no preprocessor, minimal implicit conversions, explicit address spaces and bindings). Alignment with modern GPU features (compute, storage buffers, textures, atomics) while retaining a familiar C/Rust-like syntax. == Language overview == === Types and values === Core scalar types include bool, i32, u32, and f32. Vectors (e.g., vec2, vec3, vec4) and matrices (up to 4×4) are available for floating-point element types. Optional f16 (half precision) may be enabled via a WebGPU feature; availability is implementation-dependent. Atomic types (atomic, atomic) support limited atomic operations in qualified address spaces. === Variables and address spaces === Variables are declared with let (immutable), var (mutable), or const (compile-time constant). Storage classes (address spaces) include function, private, workgroup, uniform, and storage with read or read_write access as applicable. WGSL defines explicit layout and alignment rules; attributes such as @align, @size, and @stride control data layout for buffer interoperability. === Functions and control flow === Functions use explicit parameter and return types. Control flow includes if, switch, for, while, and loop constructs, with break/continue. Recursion is disallowed; entry-point call graphs must be acyclic. === Entry points and attributes === Shaders define stage entry points with @vertex, @fragment, or @compute. Attributes annotate bindings and interfaces, including @group, @binding (resource binding), @location (user-defined I/O), @builtin (stage built-ins such as position or global_invocation_id), @interpolate, and @workgroup_size. === Resources === WGSL exposes buffers (uniform, storage), textures (sampled, storage, and multisampled variants), and samplers (filtering/non-filtering/comparison). The binding model is explicit via descriptor sets called groups and bindings, matching WebGPU's pipeline layout model. == Compilation and validation == Browsers compile WGSL to platform-appropriate representations and native driver formats; the specific compilation pipeline is not observable by web content. WGSL source undergoes strict parsing and static validation, and WebGPU enforces robust resource access rules to avoid out-of-bounds memory hazards, contributing to predictable behavior across implementations. == Shader stages == WGSL supports three pipeline stages: vertex, fragment, and compute. === Vertex shaders === Vertex shaders transform per-vertex inputs and produce values for rasterization, including a clip-space position written to the position builtin. ==== Example ==== === Fragment shaders === Fragment shaders run per-fragment and compute color (and optionally depth) outputs written to color attachments. ==== Example ==== If half-precision (vec4h, shorthand for vec4) is desired, the code must be prefaced with a enable f16; statement. === Compute shaders === Compute shaders run in workgroups and are used for general-purpose GPU computations. ==== Example ==== == Differences from GLSL and HLSL == Compared with legacy shading languages, WGSL: Omits a preprocessor and requires explicit types and conversions. Uses explicit address spaces and binding annotations aligned with WebGPU's model. Enforces strict validation to avoid undefined behavior common in other shading languages. Defines a portable, web-focused feature set; 16-bit types and other features are opt-in and may depend on device capabilities.

  Read more →
• 

  Perfectly Imperfect (platform)

  Perfectly Imperfect is an online newsletter and social media platform. It was initially founded in 2020 as a biweekly email newsletter that focused on recommendations. In January 2024, Perfectly Imperfect launched PI.FYI, a social media platform. The platform is based around sharing recommendations. Its main feed is presented in reverse chronological order and is not algorithmically curated. == History == Perfectly Imperfect was started during the COVID-19 pandemic by Tyler Bainbridge, alongside college friends Alex Cushing and Serey Morm, whom he met at UMass Lowell; Morm later departed. Motivated by a dissatisfaction with algorithm-driven recommendation culture, they launched on Substack in September 2020. Its early newsletter format, PI, published brief recommendation lists and personal notes from contributors. Contributors have included a mix of underground artists and more established creative figures, such as Charli XCX, Chloe Cherry, Chloe Wise, and Meetka Otto. In October 2024, PI announced it was leaving Substack to launch its own site. == Overview == The current platform, PI.FYI, features both editorial content (guest columns, long-form essays, staff picks) and user-generated recommendations. The platform also supports "Ask" posts, where users can solicit recommendations from the community, and allows commenting, liking, and profile customization. In August 2025, it launched an events feature. In 2022, Perfectly Imperfect hosted their first offline event at Baby's All Right in Brooklyn, with a performance by The Dare. They have since expanded their event promotion/sponsorship to markets such as Los Angeles, San Francisco, and even Auckland.

  Read more →
• 

  Sentiment analysis

  Sentiment analysis (also known as opinion mining) is the use of natural language processing, text analysis, computational linguistics, and biometrics to systematically identify, extract, quantify, and study affective states and subjective information. Sentiment analysis is widely applied to voice of the customer materials such as reviews and survey responses, online and social media, and healthcare materials for applications that range from marketing to customer service to clinical medicine. With the rise of deep language models, such as RoBERTa, more difficult data domains can be analyzed, e.g., news texts where authors typically express their opinion/sentiment less explicitly. == Types == A basic task in sentiment analysis is classifying the polarity of a given text at the document, sentence, or feature/aspect level—whether the expressed opinion in a document, a sentence or an entity feature/aspect is positive, negative, or neutral. Advanced, "beyond polarity" sentiment classification looks, for instance, at emotional states such as enjoyment, anger, disgust, sadness, fear, and surprise. Precursors to sentimental analysis include the General Inquirer, which provided hints toward quantifying patterns in text and, separately, psychological research that examined a person's psychological state based on analysis of their verbal behavior. Subsequently, the method described in a patent by Volcani and Fogel, looked specifically at sentiment and identified individual words and phrases in text with respect to different emotional scales. A current system based on their work, called EffectCheck, presents synonyms that can be used to increase or decrease the level of evoked emotion in each scale. Many other subsequent efforts were less sophisticated, using a mere polar view of sentiment, from positive to negative, such as work by Turney, and Pang who applied different methods for detecting the polarity of product reviews and movie reviews respectively. This work is at the document level. One can also classify a document's polarity on a multi-way scale, which was attempted by Pang and Snyder among others: Pang and Lee expanded the basic task of classifying a movie review as either positive or negative to predict star ratings on either a 3- or a 4-star scale, while Snyder performed an in-depth analysis of restaurant reviews, predicting ratings for various aspects of the given restaurant, such as the food and atmosphere (on a five-star scale). First steps to bringing together various approaches—learning, lexical, knowledge-based, etc.—were taken in the 2004 AAAI Spring Symposium where linguists, computer scientists, and other interested researchers first aligned interests and proposed shared tasks and benchmark data sets for the systematic computational research on affect, appeal, subjectivity, and sentiment in text. Even though in most statistical classification methods, the neutral class is ignored under the assumption that neutral texts lie near the boundary of the binary classifier, several researchers suggest that, as in every polarity problem, three categories must be identified. Moreover, it can be proven that specific classifiers such as the Max Entropy and SVMs can benefit from the introduction of a neutral class and improve the overall accuracy of the classification. There are in principle two ways for operating with a neutral class. Either, the algorithm proceeds by first identifying the neutral language, filtering it out and then assessing the rest in terms of positive and negative sentiments, or it builds a three-way classification in one step. This second approach often involves estimating a probability distribution over all categories (e.g. naive Bayes classifiers as implemented by the NLTK). Whether and how to use a neutral class depends on the nature of the data: if the data is clearly clustered into neutral, negative and positive language, it makes sense to filter the neutral language out and focus on the polarity between positive and negative sentiments. If, in contrast, the data are mostly neutral with small deviations towards positive and negative affect, this strategy would make it harder to clearly distinguish between the two poles. A different method for determining sentiment is the use of a scaling system whereby words commonly associated with having a negative, neutral, or positive sentiment are given an associated number on a −10 to +10 scale (most negative up to most positive) or simply from 0 to a positive upper limit such as +4. This makes it possible to adjust the sentiment of a given term relative to its environment (usually on the level of the sentence). When a piece of unstructured text is analyzed using natural language processing, each concept in the specified environment is given a score based on the way sentiment words relate to the concept and its associated score. This allows movement to a more sophisticated understanding of sentiment, because it is now possible to adjust the sentiment value of a concept relative to modifications that may surround it. Words, for example, that intensify, relax or negate the sentiment expressed by the concept can affect its score. Alternatively, texts can be given a positive and negative sentiment strength score if the goal is to determine the sentiment in a text rather than the overall polarity and strength of the text. There are various other types of sentiment analysis, such as aspect-based sentiment analysis, grading sentiment analysis (positive, negative, neutral), multilingual sentiment analysis and detection of emotions. === Subjectivity/objectivity identification === This task is commonly defined as classifying a given text (usually a sentence) into one of two classes: objective or subjective. This problem can sometimes be more difficult than polarity classification. The subjectivity of words and phrases may depend on their context and an objective document may contain subjective sentences (e.g., a news article quoting people's opinions). Moreover, as mentioned by Su, results are largely dependent on the definition of subjectivity used when annotating texts. However, Pang showed that removing objective sentences from a document before classifying its polarity helped improve performance. Subjective and objective identification, emerging subtasks of sentiment analysis to use syntactic, semantic features, and machine learning knowledge to identify if a sentence or document contains facts or opinions. Awareness of recognizing factual and opinions is not recent, having possibly first presented by Carbonell at Yale University in 1979. The term objective refers to the incident carrying factual information. Example of an objective sentence: 'To be elected president of the United States, a candidate must be at least thirty-five years of age.' The term subjective describes the incident contains non-factual information in various forms, such as personal opinions, judgment, and predictions, also known as 'private states'. In the example down below, it reflects a private states 'We Americans'. Moreover, the target entity commented by the opinions can take several forms from tangible product to intangible topic matters stated in Liu (2010). Furthermore, three types of attitudes were observed by Liu (2010), 1) positive opinions, 2) neutral opinions, and 3) negative opinions. Example of a subjective sentence: 'We Americans need to elect a president who is mature and who is able to make wise decisions.' This analysis is a classification problem. Each class's collections of words or phrase indicators are defined for to locate desirable patterns on unannotated text. For subjective expression, a different word list has been created. Lists of subjective indicators in words or phrases have been developed by multiple researchers in the linguist and natural language processing field states in Riloff et al. (2003). A dictionary of extraction rules has to be created for measuring given expressions. Over the years, in subjective detection, the features extraction progression from curating features by hand to automated features learning. At the moment, automated learning methods can further separate into supervised and unsupervised machine learning. Patterns extraction with machine learning process annotated and unannotated text have been explored extensively by academic researchers. However, researchers recognized several challenges in developing fixed sets of rules for expressions respectably. Much of the challenges in rule development stems from the nature of textual information. Six challenges have been recognized by several researchers: 1) metaphorical expressions, 2) discrepancies in writings, 3) context-sensitive, 4) represented words with fewer usages, 5) time-sensitive, and 6) ever-growing volume. Metaphorical expressions. The text contains metaphoric expression may impact on the performance on the extraction. Besides, metaphors take in different forms, which may have been contribu

  Read more →