AI Content Udemy

AI Content Udemy — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

• 

  Rule-based machine translation

  Rule-based machine translation (RBMT) is a classical approach of machine translation systems based on linguistic information about source and target languages. Such information is retrieved from (unilingual, bilingual or multilingual) dictionaries and grammars covering the main semantic, morphological, and syntactic regularities of each language. Having input sentences, an RBMT system generates output sentences on the basis of analysis of both the source and the target languages involved. RBMT has been progressively superseded by more efficient methods, particularly neural machine translation. == History == The first RBMT systems were developed in the early 1970s. The most important steps of this evolution were the emergence of the following RBMT systems: Systran Japanese MT systems Today, other common RBMT systems include: Apertium GramTrans == Types of RBMT == There are three different types of rule-based machine translation systems: Direct Systems (Dictionary Based Machine Translation) map input to output with basic rules. Transfer RBMT Systems (Transfer Based Machine Translation) employ morphological and syntactical analysis. Interlingual RBMT Systems (Interlingua) use an abstract meaning. RBMT systems can also be characterized as the systems opposite to Example-based Systems of Machine Translation (Example Based Machine Translation), whereas Hybrid Machine Translations Systems make use of many principles derived from RBMT. == Basic principles == The main approach of RBMT systems is based on linking the structure of the given input sentence with the structure of the demanded output sentence, necessarily preserving their unique meaning. The following example can illustrate the general frame of RBMT: A girl eats an apple. Source Language = English; Demanded Target Language = German Minimally, to get a German translation of this English sentence one needs: A dictionary that will map each English word to an appropriate German word. Rules representing regular English sentence structure. Rules representing regular German sentence structure. And finally, we need rules according to which one can relate these two structures together. Accordingly, we can state the following stages of translation: 1st: getting basic part-of-speech information of each source word: a = indef.article; girl = noun; eats = verb; an = indef.article; apple = noun 2nd: getting syntactic information about the verb "to eat": NP-eat-NP; here: eat – Present Simple, 3rd Person Singular, Active Voice 3rd: parsing the source sentence: (NP an apple) = the object of eat Often only partial parsing is sufficient to get to the syntactic structure of the source sentence and to map it onto the structure of the target sentence. 4th: translate English words into German a (category = indef.article) => ein (category = indef.article) girl (category = noun) => Mädchen (category = noun) eat (category = verb) => essen (category = verb) an (category = indef. article) => ein (category = indef.article) apple (category = noun) => Apfel (category = noun) 5th: Mapping dictionary entries into appropriate inflected forms (final generation): A girl eats an apple. => Ein Mädchen isst einen Apfel. == Ontologies == An ontology is a formal representation of knowledge that includes the concepts (such as objects, processes etc.) in a domain and some relations between them. If the stored information is of linguistic nature, one can speak of a lexicon. In NLP, ontologies can be used as a source of knowledge for machine translation systems. With access to a large knowledge base, rule-based systems can be enabled to resolve many (especially lexical) ambiguities on their own. In the following classic examples, as humans, we are able to interpret the prepositional phrase according to the context because we use our world knowledge, stored in our lexicons:I saw a man/star/molecule with a microscope/telescope/binoculars.Since the syntax does not change, a traditional rule-based machine translation system may not be able to differentiate between the meanings. With a large enough ontology as a source of knowledge however, the possible interpretations of ambiguous words in a specific context can be reduced. === Building ontologies === The ontology generated for the PANGLOSS knowledge-based machine translation system in 1993 may serve as an example of how an ontology for NLP purposes can be compiled: A large-scale ontology is necessary to help parsing in the active modules of the machine translation system. In the PANGLOSS example, about 50,000 nodes were intended to be subsumed under the smaller, manually-built upper (abstract) region of the ontology. Because of its size, it had to be created automatically. The goal was to merge the two resources LDOCE online and WordNet to combine the benefits of both: concise definitions from Longman, and semantic relations allowing for semi-automatic taxonomization to the ontology from WordNet. A definition match algorithm was created to automatically merge the correct meanings of ambiguous words between the two online resources, based on the words that the definitions of those meanings have in common in LDOCE and WordNet. Using a similarity matrix, the algorithm delivered matches between meanings including a confidence factor. This algorithm alone, however, did not match all meanings correctly on its own. A second hierarchy match algorithm was therefore created which uses the taxonomic hierarchies found in WordNet (deep hierarchies) and partially in LDOCE (flat hierarchies). This works by first matching unambiguous meanings, then limiting the search space to only the respective ancestors and descendants of those matched meanings. Thus, the algorithm matched locally unambiguous meanings (for instance, while the word seal as such is ambiguous, there is only one meaning of seal in the animal subhierarchy). Both algorithms complemented each other and helped constructing a large-scale ontology for the machine translation system. The WordNet hierarchies, coupled with the matching definitions of LDOCE, were subordinated to the ontology's upper region. As a result, the PANGLOSS MT system was able to make use of this knowledge base, mainly in its generation element. == Components == The RBMT system contains: a SL morphological analyser - analyses a source language word and provides the morphological information; a SL parser - is a syntax analyser which analyses source language sentences; a translator - used to translate a source language word into the target language; a TL morphological generator - works as a generator of appropriate target language words for the given grammatica information; a TL parser - works as a composer of suitable target language sentences; Several dictionaries - more specifically a minimum of three dictionaries: a SL dictionary - needed by the source language morphological analyser for morphological analysis, a bilingual dictionary - used by the translator to translate source language words into target language words, a TL dictionary - needed by the target language morphological generator to generate target language words. The RBMT system makes use of the following: a Source Grammar for the input language which builds syntactic constructions from input sentences; a Source Lexicon which captures all of the allowable vocabulary in the domain; Source Mapping Rules which indicate how syntactic heads and grammatical functions in the source language are mapped onto domain concepts and semantic roles in the interlingua; a Domain Model/Ontology which defines the classes of domain concepts and restricts the fillers of semantic roles for each class; Target Mapping Rules which indicate how domain concepts and semantic roles in the interlingua are mapped onto syntactic heads and grammatical functions in the target language; a Target Lexicon which contains appropriate target lexemes for each domain concept; a Target Grammar for the target language which realizes target syntactic constructions as linearized output sentences. == Advantages == No bilingual texts are required. This makes it possible to create translation systems for languages that have no texts in common, or even no digitized data whatsoever. Domain independent. Rules are usually written in a domain independent manner, so the vast majority of rules will "just work" in every domain, and only a few specific cases per domain may need rules written for them. No quality ceiling. Every error can be corrected with a targeted rule, even if the trigger case is extremely rare. This is in contrast to statistical systems where infrequent forms will be washed away by default. Total control. Because all rules are hand-written, you can easily debug a rule-based system to see exactly where a given error enters the system, and why. Reusability. Because RBMT systems are generally built from a strong source language analysis that is fed to a transfer step and target language generator, the source language analysis and targe

  Read more →
• 

  Air Force Network

  Air Force Network (AFNet) is an Indian Air Force (IAF) owned, operated and managed digital information grid. The AFNet replaces the Indian Air Force's (IAF) old communication network set-up using the tropo-scatter technology of the 1950s making it a true net-centric combat force. The IAF project is part of the overall mission to network all three services; The Indian Army, The Indian Navy and The Indian Air Force. The former Defence Minister AK Antony inaugurated the IAF's the AFNET on 14 September 2010 dedicating it to the people of India, for their direct or indirect participation in the communication revolution. == Background == Armed Forces in India has been using troposcatters as primary means of military communications since the 1950s, thereby occupying huge and expensive 2G and 3G spectrums which otherwise could have been used for expanding and de-clogging the civilian wireless communication network. The rapid expansion of civilian mobile telephony leading to need for larger bandwidth for wireless communication and commercial need to operate the 3G network necessitated the Government of India to have the Indian Armed Forces vacate the spectrum occupied by them. Thus the government of India through Department of Telecommunication (DoT) started a project called "Network for Spectrum" to set up a fiber optics network for the exclusive use of Indian Armed Forces in exchange for spectrum being released by the Defence Forces. The aim of 'Network for Spectrum' being twofold - to facilitate the growth of national tele-density on the one hand, and ensuring modernization of defence communications with the state-of-the-art communication infrastructure, and to support net-centric military operations. The Department of Telecom and the Ministry of Defence signed the memorandum of understanding for vacating the spectrum and setting up dedicated network for the use of defence forces. In this MoU, DoT agreed to laying of 40,000 route kilometres of optical fibre cable connecting 219 Army stations, 33 Navy stations and 162 points for the Air Force. It further agreed to setting up an exclusive defence band and Defence Interest Zone along 100 km of the international border, where spectrum will be reserved only for use by the Armed Forces. The total cost of implementing "Network for Spectrum" project is estimated to be ₹ 10,000 crores. AFNet is Indian Air Force component of Digital Information Grid under "Network for Spectrum" project and the AFNet has been extended and connected to the Digital Information Grid Project under implementation for the Indian Navy and the Indian Army on 2015. == Project Origin == The Air Force Network (AFNet) had been developed by the Indian Air Force at a cost of ₹1,077 crore (US$235.53 million) in collaboration with HCL Technologies and Bharat Sanchar Nigam Limited. It will replace the Air Force's more than half-a-century-old telecom network. This project is part of the defence ministry's initiative to digitize the communication systems of the three armed forces under "Network for Spectrum" initiative to improve coordination among themselves and other Military and Strategic Institution. IAF was the first to complete this gigabyte digital information grid implemented under the AFNet project. AFNet will be connected and extended to a Unified Digital Grid encompassing all the legs of Indian Armed Forces. The then defence minister, A. K. Antony, inaugurated the AFNet, IAF's gigabyte digital information grid. The grid is aimed at improving the network-centric warfare capability of the Air Force. The event also saw the presence of other personalities including the then Minister of Communication & IT, A. Raja; the Marshal of the Air Force, Arjan Singh; the Chief of the Air Staff, the Chief of the Army Staff and other officials from the three services and members of the Industry. The event also featured a practice interception of a simulated aerial target by a MiG-29 which took off from an airbase in the Punjab sector using the AFNet capabilities. Further capabilities in line with network centric warfare were also demonstrated. This included sharing information, videos and pictures by operational assets and platforms like UAVs and AWACS to decision-makers who are several hundred kilometres apart. == Technology, Design & Structure == AFNet incorporates the latest traffic transportation technology in form of Internet Protocol (IP) packets over the network using Multiprotocol Label Switching (MPLS). A large Voice over Internet Protocol (VoIP) layer with stringent quality of service enforcement will facilitate robust, high quality voice, video and conferencing solutions. AFNet will prove to be an effective force multiplier for intelligence analysis, mission planning and control, post-mission feedback and related activities like maintenance, logistics and administration. A comprehensive design with multi-layer security precautions for “Defence in Depth” have been planned by incorporating encryption technologies, Intrusion Prevention Systems to ensure the resistance of the IT system against information manipulation and eavesdropping. The network is secured with a host of advanced state-of-the-art encryption technologies. It is designed for high reliability with redundancy built into the network design itself. The AFNet is also capable of transmitting video from unmanned surveillance aircraft (UAV), pictures from airborne warning and control systems (AWACS) to decision makers on the ground and providing intelligence inputs from remote areas. The AFNet is also expected to facilitate accelerated economic growth by providing radio frequency spectrum for telecommunication purposes. AFNET will be the largest Multi-protocol Label Switching (MPLS) network in the defence segment. == Demonstration == At the AFNet launch, the IAF showcased a practice interception of simulated enemy targets by a pair of Mig-29 fighter aircraft airborne from an advanced airbase in the Punjab sector using the gigabyte digital information grid. During the AFNet-assisted operations, the Indian fighter jets neutralised intruding targets in the western sector, which was played out live on the giant screens at the Air Force auditorium offering a glimpse of the harnessed potential of the system. The final orders for engaging the enemy targets were issued live by Antony, whose queries about how the operation went were responded to by the pilot as "excellent". Various other functionalities contributing towards Network Centric Warfare were also showcased. These consisted of facilitating video from Unmanned Aerial Vehicle (UAV), pictures from an AWACS aircraft to the decision-makers on ground sitting hundreds of kilometres away, providing intelligence inputs from far-flung areas at central locations seamlessly. This was possible mainly because of the robust networking platform provided by AFNet. == Integrated Air Command and Control System == Integrated Air Command and Control System (IACCS) is an automated command and control system for air defence operated by the Indian Air Force. IACCS operations rides the AFNET backbone integrating all ground-based and airborne sensors, air defense weapon systems and command and control (C2) nodes. Subsequent integration with other services networks and civil radars will provide an integrated Air Situation Picture to operators to carry out AD role. The project was envisaged in 1995 following the Purulia arms drop case and was a part of IAF’s first Air Power Doctrinal manual issued in the 2000s, later revised in 2022. The first node in the western sectors had been operationalised by September 2010. The first five nodes located in the western and south western sectors were commissioned in 2011. The Air Force was preparing to seek clearance for five further nodes which would cover the rest of the nation including the island territories. Through the IACCS, IAF will connect all of its space, air and ground assets quickly, for total awareness of a region. This will offer connectivity for all the ground platforms and airborne platforms (including AEW&C), as a part of the network centricity of IAF. The IACCS also facilitates real-time transport of images, data and voice, amongst satellites, aircraft and ground stations. By 2018, five IACCS nodes had been established including Barnala (Punjab), Wadsar (Gujarat), Aya Nagar (Delhi), Jodhpur (Rajasthan) and Ambala (Haryana). Following this, under Phase-II, 4 additional nodes and 10 sub-nodes are to be set up. The major nodes will be established in the Eastern, Central, Southern and Andaman and Nicobar sectors. The second phase will cost ₹8,000 crore (equivalent to ₹110 billion or US$1.1 billion in 2023). IACCS successfully integrated all operating radars, including its own, the Army's, and civilian ones, in 2023. This enabled the autonomous firing response capability to take down incoming missiles, aircraft, and UAVs. The Akashteer system of the Indian Army is being integrated with the IACCS

  Read more →
• 

  Control break

  In computer programming, a control break is a change in the value of one of the keys on which a file is sorted, which requires some extra processing. For example, with an input file sorted by post code, the number of items found in each postal district might need to be printed on a report, and a heading shown for the next district. Quite often there is a hierarchy of nested control breaks in a program, such as streets within districts within areas, with the need for a grand total at the end. Structured programming techniques have been developed to ensure correct processing of control breaks in languages such as COBOL and to ensure that conditions such as empty input files and sequence errors are handled properly. With fourth-generation languages such as SQL, the programming language should handle most of the details of control breaks automatically.

  Read more →
• 

  Data recovery

  In computing, data recovery is a process of retrieving deleted, inaccessible, lost, corrupted, damaged, or overwritten data from secondary storage, removable media or files, when the data stored in them cannot be accessed in a usual way. The data is most often salvaged from storage media such as internal or external hard disk drives (HDDs), solid-state drives (SSDs), USB flash drives, magnetic tapes, CDs, DVDs, RAID subsystems, and other electronic devices. Recovery may be required due to physical damage to the storage devices or logical damage to the file system that prevents it from being mounted by the host operating system (OS). Logical failures occur when the hard drive devices are functional but the user or automated-OS cannot retrieve or access data stored on them. Logical failures can occur due to corruption of the engineering chip, lost partitions, firmware failure, or failures during formatting/re-installation. Data recovery can be a very simple or technical challenge. This is why there are specific software companies specialized in this field that help to get back data on your system. == About == The most common data recovery scenarios involve an operating system failure, malfunction of a storage device, logical failure of storage devices, accidental damage or deletion, etc. (typically, on a single-drive, single-partition, single-OS system), in which case the ultimate goal is simply to copy all important files from the damaged media to another new drive. This can be accomplished using a Live CD, or DVD by booting directly from a ROM or a USB drive instead of the corrupted drive in question. Many Live CDs or DVDs provide a means to mount the system drive and backup drives or removable media, and to move the files from the system drive to the backup media with a file manager or optical disc authoring software. Such cases can often be mitigated by disk partitioning and consistently storing valuable data files (or copies of them) on a different partition from the replaceable OS system files. Another scenario involves a drive-level failure, such as a compromised file system or drive partition, or a hard disk drive failure. In any of these cases, the data is not easily read from the media devices. Depending on the situation, solutions involve repairing the logical file system, partition table, or master boot record, or updating the firmware or drive recovery techniques ranging from software-based recovery of corrupted data, to hardware- and software-based recovery of damaged service areas (also known as the hard disk drive's "firmware"), to hardware replacement on a physically damaged drive which allows for the extraction of data to a new drive. If a drive recovery is necessary, the drive itself has typically failed permanently, and the focus is rather on a one-time recovery, salvaging whatever data can be read. In a third scenario, files have been accidentally "deleted" from a storage medium by the users. Typically, the contents of deleted files are not removed immediately from the physical drive; instead, references to them in the directory structure are removed, and thereafter space the deleted data occupy is made available for later data overwriting. In the mind of end users, deleted files cannot be discoverable through a standard file manager, but the deleted data still technically exists on the physical drive. In the meantime, the original file contents remain, often several disconnected fragments, and may be recoverable if not overwritten by other data files. The term "data recovery" is also used in the context of forensic applications or espionage, where data which have been encrypted, hidden, or deleted, rather than damaged, are recovered. Sometimes data present in the computer gets encrypted or hidden due to reasons like virus attacks which can only be recovered by some computer forensic experts. == Physical damage == A wide variety of failures can cause physical damage to storage media, which may result from human errors and natural disasters. CD-ROMs can have their metallic substrate or dye layer scratched off; hard disks can suffer from a multitude of mechanical failures, such as head crashes, PCB failure, and failed motors; tapes can simply break. Physical damage to a hard drive, even in cases where a head crash has occurred, does not necessarily mean permanent data loss. However, in extreme cases, such as prolonged exposure to moisture and corrosion —like the lost Bitcoin hard drive of James Howells, buried in the Newport landfill for over a decade — recovery is usually impossible. In rare cases, forensic techniques such as magnetic force microscopy (MFM) have been explored to detect residual magnetic traces when data holds exceptional value. Other techniques employed by many professional data recovery companies can typically salvage most, if not all, of the data that had been lost when the failure occurred. Of course, there are exceptions to this, such as cases where severe damage to the hard drive platters may have occurred. However, if the hard drive can be repaired and a full image or clone created, then the logical file structure can be rebuilt in most instances. Most physical damage cannot be repaired by end users. For example, opening a hard disk drive in a normal environment can allow airborne dust to settle on the platter and become caught between the platter and the read/write head. During normal operation, read/write heads float 3 to 6 nanometers above the platter surface, and the average dust particles found in a normal environment are typically around 30,000 nanometers in diameter. When these dust particles get caught between the read/write heads and the platter, they can cause new head crashes that further damage the platter and thus compromise the recovery process. Furthermore, end users generally do not have the hardware or technical expertise required to make these repairs. Consequently, data recovery companies are often employed to salvage important data with the more reputable ones using class 100 dust- and static-free cleanrooms. === Recovery techniques === Recovering data from physically damaged hardware can involve multiple techniques. Some damage can be repaired by replacing parts in the hard disk. This alone may make the disk usable, but there may still be logical damage. A specialized disk-imaging procedure is used to recover every readable bit from the surface. Once this image is acquired and saved on a reliable medium, the image can be safely analyzed for logical damage and will possibly allow much of the original file system to be reconstructed. ==== Hardware repair ==== A common misconception is that a damaged printed circuit board (PCB) may be simply replaced during recovery procedures by an identical PCB from a healthy drive. While this may work in rare circumstances on hard disk drives manufactured before 2003, it will not work on newer drives. Electronics boards of modern drives usually contain drive-specific adaptation data (generally a map of bad sectors and tuning parameters) and other information required to properly access data on the drive. Replacement boards often need this information to effectively recover all of the data. The replacement board may need to be reprogrammed. Some manufacturers (Seagate, for example) store this information on a serial EEPROM chip, which can be removed and transferred to the replacement board. Each hard disk drive has what is called a system area or service area; this portion of the drive, which is not directly accessible to the end user, usually contains drive's firmware and adaptive data that helps the drive operate within normal parameters. One function of the system area is to log defective sectors within the drive; essentially telling the drive where it can and cannot write data. The sector lists are also stored on various chips attached to the PCB, and they are unique to each hard disk drive. If the data on the PCB do not match what is stored on the platter, then the drive will not calibrate properly. In most cases the drive heads will click because they are unable to find the data matching what is stored on the PCB. == Logical damage == The term "logical damage" refers to situations in which the error is not a problem in the hardware and requires software-level solutions. === Corrupt partitions and file systems, media errors === In some cases, data on a hard disk drive can be unreadable due to damage to the partition table or file system, or to (intermittent) media errors. In the majority of these cases, at least a portion of the original data can be recovered by repairing the damaged partition table or file system using specialized data recovery software such as TestDisk; software like ddrescue can image media despite intermittent errors, and image raw data when there is partition table or file system damage. This type of data recovery can be performed by people without expertise in drive hardware as it requires no special physica

  Read more →
• 

  Automation engineering

  Automation engineering is a branch of engineering that deals with the development of methods and facilities that replace, in whole or in part, manual labour related to the control and monitoring of systems and processes. == Automation engineer == Automation engineers are experts who have the knowledge and ability to design, create, develop and manage machines and systems, for example, factory automation, process automation and warehouse automation. Automation technicians are also involved. == Scope == Automation engineering is the integration of standard engineering fields. Automatic control of various control systems for operating various systems or machines to reduce human efforts & time to increase accuracy. Automation engineers design and service electromechanical devices and systems for high-speed robotics and programmable logic controllers (PLCs). == Work and career after graduation == Graduates can work for both government and private sector entities such as industrial production, and companies that create and use automation systems, for example, the paper industry, automotive industry, metallurgical industry, food and agricultural industry, water treatment, and oil & gas sectors such as refineries, rolling mills, and power plants. == Job description == Automation engineers can design, program, simulate and test automated machinery and processes, and are usually employed in industries such as the energy sector in plants, car manufacturing facilities, food processing plants, and robots. Automation engineers are responsible for creating detailed design specifications and other documents, developing automation based on specific requirements for the process involved, and conforming to international standards like IEC-61508, local standards, and other process-specific guidelines and specifications, simulating, testing, and commissioning electronic equipment for automation.

  Read more →
• 

  TRAME

  TRAME (TRAnsmission of MEssages) was the name of the second computer network in the world similar to the internet to be used in an electric utility. Like the internet, the base technology was packet switching; it was developed by the electric utility ENHER in Barcelona. It was deployed by the same utility, first in Catalonia and Aragón, Spain, and later in other places. Its development started in 1974 and the first routers, called nodes at that time, were deployed by 1978. The network was in operation until 2016 (38 years) with successive technological software and hardware updates. == Beginnings == In 1974, packet switching was a technology known only in research circles. The concept began in 1968 in association with the United States' Advanced Research Projects Agency (ARPA) research project ARPANET. The idea of applying the packet switching concept to electric utilities control communication networks first appeared in 1974 when the Swedish power utility Vattenfall started to create its TIDAS packet-switching network and was followed by the Spanish electric utility ENHER, which aimed to telecontrol and automate its high-voltage power grid. For this purpose, ENHER created a specific team of people to develop both the packet-switching network and the supervisory control and data acquisition (SCADA) system, also called the telecontrol system. By 1978 the first four TRAME routers were available and by 1980, eight of them were deployed and operating. The printed circuit boards (PCBs) controlling the communication lines were connected to a shared memory PCB allowing them to exchange data and messages. The project was developed together with its main initial application, the Telecontrol or SCADA system SICL (Sistema Integral de Control Local) with which initially they shared a very similar hardware. The maximum link capacity was 9600 bit/s, which in 1980 was the maximum possible on a 4 kHz wide voice channel at the time. These channels were the basic unit of the then-analog communication systems in use. By that time power utilities used either telephone calls or low speed (below 1200bit/s) dedicated links for telecontrol, typically shared among ten high-voltage electrical substations. == Services == The basic service provided by the TRAME network was SCADA or Telecontrol to automate the high-voltage power grid, thus improving operational efficiency, which was until then operated manually with telephone communication between human operators. Each TRAME router was associated with one or more remote terminal units (RTUs) of the SICL telecontrol system. It also had connected screens, and later PCs, located in electrical substations to interchange messages between them and with the Control Center located in the well-known Casa Fuster in Barcelona. It was a kind of predecessor to today's e-mail. Later, in the 1990s, other protocols (X.25, IP) were developed to include corporate information technology (IT) terminals, company physical surveillance systems and other services. Additionally, applications and terminals were developed for the transmission of voice and video over the TRAME network. == Protocols == The TRAME routing system, like that of the original ARPANET, was based on the Bellman-Ford algorithm but with "split-horizon" as in the Swedish TIDAS network, but with an original improvement. This protocol allows optimal paths to be found in meshed networks for each packet to be transmitted, allowing the shared use of the same network by multiple services. In contrast, traditional circuit-switched technology used to establish dedicated circuits for each service or communication. The addressing of routers and terminals used a proprietary system with a 16-bit address; it would be the equivalent of the well-known IP (Internet Protocol) version 4 (IPv4), still in use on the internet today, which uses 32-bit addresses. It is necessary to take into account that in 1978, the IPv4 protocol did not yet exist since the IPv4 version used on the internet did not appear until 1981, and in fact, did not reach the general public until much later. The line protocols were also proprietary and were called UCL (Unidad de Control de Línea, 'line control unit'), which linked the routers together, and UTR (Unión TRAME-Remotas), the access protocol. They were designed to offer the highest quality of service required by the telecontrol/SCADA function in terms of data integrity and availability set by the International Electrotechnical Commission (IEC) IEC-870-5-1 and ANSI C37.1. standards, and because the protocol used at the time in corporate computer networks, HDLC (high-level data link control), did not offer enough quality for critical industrial applications. Later on, other protocols like X.25 and IP were also made compatible with the aforementioned TRAME protocols. In 2000, the UTR protocol was replaced by the international standard IEC 60870- 5-101/104. Initially network flow control was based on the management of eight data priorities in head-of-the-line (HOL) waiting queues. Later and after some experimentation, a flow control method based on a bit indicating route congestion and management of the gap between packets when accessing the network was adopted. This required measuring the capacity of the route bottleneck. An end-to-end protocol was also added for some flows requiring order preservation like X.25. == Evolution == To last for 38 years, the technology had to endure intense evolution. There were essentially four TRAME generations which are summarized in the table. A description of the four generations of TRAME is provided below. === TRAME 1 === The project began in 1974 and in 1978 a first network with four routers was already installed and in operation at the electric utility ENHER. In 1980, the network had eight nodes in operation (see Figure I). The hardware was based on the Zilog Z80 processor and had a multiprocessor structure with 16 processors sharing a common memory. The software was developed at ENHER's headquarters located in the well-known Casa Fuster, Passeig de Gràcia, 132, Barcelona, using the Z80 assembly language. Beyond 1980 the software began to be written in C programming language and an HP64000 Logic Development System emulator was used for the purpose. The hardware was produced by ISEL, an INI (Instituto Nacional de Indústria) company. The routing system was a variant of Bellman-Ford with split-horizon. It was an improvement of the original ARPA network routing system consisting of an original update procedure which allowed for a faster reaction to changes. The distance function was the number of packets in the output waiting queues plus one. The line protocols (UCL for internal lines linking routers and UTR for accessing the network) were designed to meet the stringent requirements set for telecontrol (SCADA) of high-voltage power networks (IEC-870-5-1 and ANSI C37.1 standards). At the OSI transport layer, windows with a width of 1 to 8, depending on the required service, residing in the terminals were used. Initially, addresses were only 14 bits long to address both the routers (called nodes by then) and the devices connected to them. They were made up of two fields, an 8-bit field to address the router and a 6-bit sub-address to address the terminals connected to it. The node address was assigned to the nodes and not to the ends of the links as in the internet. The basic advantages of TRAME over other technologies used in electric utilities at the time were in part due to the packet technology itself: ability to manage any network topology, automatic adaptability to topological and traffic changes, integration of different link technologies (digital or analog) and capacities in a single network, open and decentralized intercommunicability between users and devices, simultaneous communication with several users and locations from a single physical connection, and integrated network supervision. In fact, the network was provided from its inception with a supervision center consisting of a computer and a synoptic board located at the company's headquarters (see Figure II). But other advantages were due to the specific design of TRAME: high data integrity, priority support for packets, and ease of including special protocols such as the many SCADA protocols in use at that time. All of the above resulted in improved quality of service, especially with respect to data availability and data integrity, and in the integration of services in a single network. Part of the evolution of its deployment can be seen in Figures II to IV. === TRAME 2 === In 1990, TRAME 2 was fully deployed and TRAME 1 was replaced. The processor of the new hardware was Intel 80286 and the hardware structure and external appearance of the routers was very similar to that of TRAME 1. The software was written in C and the above-mentioned emulator continued to be used. Improvements over TRAME 1 were the introduction of the standardized X.25 access protocol

  Read more →
• 

  Bus encryption

  Bus encryption is the use of encrypted program instructions on a data bus in a computer that includes a secure cryptoprocessor for executing the encrypted instructions. Bus encryption is used primarily in electronic systems that require high security, such as automated teller machines, TV set-top boxes, and secure data communication devices such as two-way digital radios. Bus encryption can also mean encrypted data transmission on a data bus from one processor to another processor. For example, from the CPU to a GPU which does not require input of encrypted instructions. Such bus encryption is used by Windows Vista and newer Microsoft operating systems to protect certificates, BIOS, passwords, and program authenticity. PVP-UAB (Protected Video Path) provides bus encryption of premium video content in PCs as it passes over the PCIe bus to graphics cards to enforce digital rights management. The need for bus encryption arises when multiple people have access to the internal circuitry of an electronic system, either because they service and repair such systems, stock spare components for the systems, own the system, steal the system, or find a lost or abandoned system. Bus encryption is necessary not only to prevent tampering of encrypted instructions that may be easily discovered on a data bus or during data transmission, but also to prevent discovery of decrypted instructions that may reveal security weaknesses that an intruder can exploit. In TV set-top boxes, it is necessary to download program instructions periodically to customer's units to provide new features and to fix bugs. These new instructions are encrypted before transmission, but must also remain secure on data buses and during execution to prevent the manufacture of unauthorized cable TV boxes. This can be accomplished by secure crypto-processors that read encrypted instructions on the data bus from external data memory, decrypt the instructions in the cryptoprocessor, and execute the instructions in the same cryptoprocessor.

  Read more →
• 

  Virtual influencer

  A virtual influencer, sometimes described as a virtual persona or virtual model, is a computer-generated fictional character that can be used for a variety of marketing-related purposes, but most frequently for social media marketing, in lieu of online human "influencers". Most virtual influencers are designed using computer graphics and motion capture technology to resemble real people in realistic situations. Common derivatives of virtual influencers include VTubers, which broadly refer to online entertainers and YouTubers who represent themselves using virtual avatars instead of their physical selves. == History == Virtual influencers are fundamentally synonymous with virtual idols, which originate from Japan's anime and Japanese idol culture that dates back to the 1980s. The first virtual idol created was Lynn Minmay, a fictional singer and main character of the anime television series Super Dimension Fortress Macross (1982) and the animated film adaptation Macross: Do You Remember Love? (1984). Minmay's success led to the production of more Japanese virtual idols, such as EVE from the Japanese cyberpunk anime Megazone 23 (1985), and Sharon Apple in Macross Plus (1994). Virtual idols were not always well received – in 1995, Japanese talent agency Horipro created Kyoko Date, which was inspired by the Macross franchise and dating sim games such as Tokimeki Memorial (1994). Date failed to gain commercial success despite drawing headlines for her debut as a CGI idol, largely due to technical limitations leading to issues such as unnatural movements, an issue also known as the uncanny valley. Since their inception, many virtual idols created have achieved continual success, with notable names including the Vocaloid singer Hatsune Miku, and the VTuber Kizuna AI. Technological advancements have also enabled production teams to use artificial intelligence and advanced techniques to customize the personalities and behavior of virtual idols. Due to modern-day advancements in technology, many virtual idols have held real-life tours and events. Notable ones include Hatsune Miku's titular tour Miku Expo and Hololive's concerts with many of their idols from their English, Japanese and Indonesian branches. Some notable events including virtual singers and influencers have included: Hatsune Miku opening for Lady Gaga in 2014 and Hoshimachi Suisei's concerts at the famous Budokan venue in Japan and her addition to the Forbes Japan list of '30 Under 30' individuals who are changing the world in their respective fields. == Benefits and criticism == From a branding perspective, virtual influencers are perceived to be much less likely to be mired in scandals. In China, celebrities caught in bad publicity such as singer Wang Leehom and entertainer Kris Wu have heightened the appeal of virtual influencers, since their existence relies entirely on computer-generated imagery and they are therefore unlikely to cause any damage to a brand's image by association. Some studies have also suggested that Generation Z consumers have a unique appetite for virtual idols and influencers, since they grew up in the age of the internet. Studies also show that human-like appearance of virtual influencers show higher message credibility than anime-like virtual influencers. Scholars and commentators have also questioned the ethics and cultural impact of virtual influencers, arguing that computer-generated personas can entrench unrealistic beauty standards while diffusing accountability for labor, identity, and consent. Business and marketing analysts have also warned that disclosure and governance remain inconsistent, recommending clearer guardrails and transparency when brands deploy synthetic spokespeople. In 2025, reporting highlighted concerns that AI-driven "virtual humans" could displace human creators and sales workers, intensifying debates over the future of creative labor and authenticity online. == Notable examples == === Virtual bands === Eternity - A South Korean virtual idol group formed by Pulse9. Gorillaz - A virtual band formed in 1998. K/DA - A virtual K-pop girl group created as part of the League of Legends video game franchise. MAVE: - A South Korean virtual girl group formed in 2023 by Metaverse Entertainment. Pentakill - A virtual heavy metal band created as part of the League of Legends video game franchise. Plave (band) - A South Korean virtual boy band formed by VLast. Squid Sisters and Off the Hook - Two virtual pop idol duos as part of the Splatoon series. Studio Killers - A Finnish-Danish-British virtual band formed in 2011. === Vocaloids === Hatsune Miku (modeled after Saki Fujita) Kagamine Rin/Len (modeled after Asami Shimoda) Megurine Luka (modeled after Yū Asakawa) Meiko (modeled after Meiko Haigō) Kaito (modeled after Naoto Fūga) === VTubers === Kano Kizuna AI Neuro-sama VShojo Ironmouse Projekt Melody Nijisanji Hololive Akai Haato Gawr Gura Hoshimachi Suisei Natsuiro Matsuri === Other examples === Ami Yamato Crazy Frog FN Meka IA Kuki AI Kyoko Date Kyra Miquela Naevis Shudu Gram

  Read more →
• 

  Aseprite

  Aseprite ( ace-prite) is a proprietary, source-available image editor designed primarily for pixel art drawing and animation. It runs on Windows, macOS, and Linux, and features different tools for image and animation editing such as layers, frames, tilemap support, command-line interface, Lua scripting, among others. It is developed by Igara Studio S.A. and led by the developers David, Gaspar, and Martín Capello. Aseprite can be downloaded as freeware, (albeit it does not have the ability to save sprites) or purchased on Steam or Itch.io. Aseprite source code and binaries are distributed under EULA, educational, and Steam proprietary licenses. == History == Aseprite, formerly known as Allegro Sprite Editor, had its first release in 2001 as a free software project under the GPLv2 license. This license was kept until August 2016 with version v1.1.8, when the developers switched to a EULA, thus making the software proprietary. On the 1st of September 2016, the main developer, David Capello, wrote a post on the Aseprite Devblog explaining this change. The EULA permits others to download the Aseprite source code, compile it, and use it for personal purposes, but forbids its redistribution to third parties. After the license change, LibreSprite, a free and open source version of it, was created. Both before and after the license change, Aseprite was sold online, on Steam, itch.io, and the project's website. The project's code repository was hosted on Google Code until August 2014, when it was migrated to GitHub, where it remains hosted to date. As of October 2022, its repository has had 68 contributors and around 19 thousand stars. From 2014 to 2021, Aseprite had 66 different releases. Aseprite was used in the development of several notable games such as TowerFall (2013), Celeste (2018), Minit (2018), Wargroove (2019), Loop Hero (2021), Eastward (2021), Unpacking (2021), Haiku the Robot (2022) and Pizza Tower (2023). == Design and features == The main design purpose of Aseprite is to create animated 2D pixel-art sprites. Some of its features include: Layers and frames, with layer grouping and animation tagging Pixel-art specific transformations and tools (pixel-perfect modes, custom brushes, etc.) Animation real-time preview and onion skinning Tilemap and tileset modes Color palette managing, including 65 default palettes Color profiles and modes (RGBA, indexed and grayscale) Non-square pixels Command line interface (CLI) and Lua scripting Aseprite uses its own binary file type to store data, which is typically saved with .ase or .aseprite extensions. Different third-party projects were developed to support parsing of .ase files in programming languages including C#, Python and JavaScript, and in game engines such as Unity and Godot. Images and animations can be exported to different file formats including PNG, GIF, FLC, FLI, JPEG, PCX, TGA, ICO, SVG, and bitmap (BMP).

  Read more →
• 

  Social media use in education

  Social media in education is the use of social media to enhance education. Social media are "a group of Internet-based applications...that allow the creation and exchange of user-generated content". It is also known as the read/write web. As time went on and technology evolved, social media has been an integral part of people's lives, including students, scholars, and teachers. However, social media are controversial because, in addition to providing new means of connection, critics claim that they damage self-esteem, shorten attention spans, and increase mental health issues. A 2016 dissertation presented surveys that focused on the impact of social media. It reported that 54.6% of students believed that social media affected their studies positively (38% agree, 16.6% strongly agree). About 40% disagreed, and 4.7% of students strongly disagreed. 53% of female students reported that social media negatively impacted their studies. Among male students, 40% agreed that social media had a negative impact on studies, while 59% disagreed. A 2023 article dives deep into the rewards system of the brain in response to social media. This study compares the social rewards system in our brain to those from social media. From ages 10-12, most are receiving a cell phone, social rewards in the brain start to feel more satisfying. Leading to adulthood, the effects of social rewards are less likely to feel reliant on feedback from peers. Equivalent to a more mature prefrontal cortex, this enables a better management of their emotional reaction to these social rewards, meaning a more balanced and controlled reaction. == History == A survey from Cambridge International of nearly 20,000 teachers and students (ages 12–19) from 100 countries found that 48% of students use a desktop computer in class, 42% uses phones, 33% use interactive whiteboards and 20% use tablets. Desktop computers are more used than tablets. Teachers were abandoning the "no phones at school" rule. A 2024 research survey through Common Sense Education reported 54% of age 8-12 and 69% of ages 13-18 social media is an extensive distraction from homework. === United States === The long-running technology boom accelerated after the millennium. As of 2018, 95% of US teenage students had access to a smartphone and 45% said they were online almost constantly. In the early days of social media, access to technology was a significant issue as many students did not own not compatible devices and school budgets were often insufficient to purchase devices for student use. Despite backlash, Missouri passed a law that prohibited teachers from communicating privately with students over social media in 2011. Supporters were concerned that online communication between underage students and faculty could lead to inappropriate relationships. Some schools adopted a "Bring Your Own Device" (BYOD) policy, allowing students to bring Internet-accessing devices, such as phones or tablets to class. During the pandemic, the federal government offered funds that allowed more schools to purchase devices. Over time, more students acquired phones with social media access. Personal devices increased student satisfaction, but reduced teachers' ability to control device use in their classrooms. A 2018 Pew Research study reported that 95% of teenagers had a phone and used social media consistently. === Canada === The Peel District School Board (PDSB) in Ontario accepted the use of social media in the classroom. In 2013, the PDSB introduced BYOD and unblocked many social media sites. That was later replaced by a policy that dealt specifically with social media. == Uses == === Classroom === In the classroom, social media offers a way to systematically distribute and gather information from students. Teachers can supply documents, and audio/video media to students for immediate or later use. One study on higher education reported that devices and social media: created opportunities for interaction provided occasions for collaboration sped up information access offered more ways to learn situated learning. Frustrations included anti-technology instructors, device challenges, and devices as a distraction. Social media in classrooms can have a negative effect. A Yale University publication reported that students who used laptops in class for non-academic reasons had poorer performance. Students spent most of their time on social media, shopping, and other personal activities. Social media has helped many educators mentor their students more effectively. === Outside of class === Social media offer a venue for video calls, stories, feeds, and game playing that can enhance the learning process. Teachers can utilize social media to communicate with their students. Social media can provide students with resources that they can utilize in essays, projects, and presentations. Students can easily access comments made by teachers and peers and offer feedback to teachers. Social media can offer students the opportunity to collaborate by sharing information without requiring face to face meetings. Social media can allow students to more easily connect with experts, to go beyond course materials. Instructors in a 2010 study reported that online technologies (social media) can help students become comfortable having discussions outside the classroom better than traditional means. Teachers may face some risk when using social media outside the classroom, without appropriate work rules. Studies explores how college students' engagement with social media platforms influences their communication preferences and habits, particularly in relation to using school email for academic purposes. === Professional development === Social media can aid professional development, as teachers become students, enhancing knowledge transfer, skill master, and collaboration. === Non-academic uses === Schools can use social media to make public announcements. Teachers and administrators can communicate other important information to parents and students and to receive feedback from them. Families can keep up with school events and policies. === Ecology education === The potential of using social media in ecological, nature and forest education include: virtual nature groups can help promote good habits in forest tourism and recreation (nature ethics), by entering general rules in the regulations by administrators, e.g. "DO NOT PICK UP PLANTS UNKNOWN TO US", which is to protects rare species from pointless picking. social media activity motivates people to learn about nature in the field, allows them to gain knowledge, dispels popular myths, enables contact with scientists and practitioners, promotes valuable literature, websites, and at the same time reveals distortions and substantive errors in popular news services. contact is not only virtual. Despite financial barriers and distance, Internet users organize nature conventions. Such meetings are an opportunity not only to make friends, but also to learn about nature together and have fun. the possibility of contact between scientists and nature lovers via Facebook has become a source of cooperation in species inventory, e.g. the online campaign of the NATRIX Herpetological Society, which consists not only of collecting reports of observations of the smooth snake by Internet users, but also of drawing attention to the biology and threats to this species. Social media has become a place where ecology education quickly reaches people of different ages and social statuses. The nature groups that have been created, in which nature lovers, biologists, foresters and scientists participate, can have a real impact on the state of knowledge and data collection through citizen science. == Apps and services == Social media can allow students to participate in their field by working with organizations outside the classroom. By offering easier access to peers outside the classroom, students can broaden their perspectives and find support resources. Social media aided learning outside of the classroom through collaboration and innovation. One specific study, "Exploring education-related use of social media," called this "audience connectors". Audience connectors bring students together while studying with WhatsApp and Facebook. This study reported that "60 percent [of students in the study] agreed that technology changes education for the better." While social media can promote a beneficial education platform, downsides exist. Students may become skilled at "lifting material from the internet" rather than enhancing their personal understanding. Another downside is student attention spans decline. A concern raised by the students of this study showed how many use spell-check as a crutch and will see a trend of points taken off when spell-check is not an option. Apps like X allowed teachers to make classroom accounts where students can learn about social media in a controlled context. Teachers can post assignments on th

  Read more →
• 

  Trace zero cryptography

  First proposed by Gerhard Frey in 1998, trace zero cryptography refers to the use of trace zero varieties (TZV) for cryptographic purpose. Trace zero varieties are subgroups of the divisor class group on a low genus hyperelliptic curve defined over a finite field. These groups can be used to establish asymmetric cryptography using the discrete logarithm problem as cryptographic primitive. Trace zero varieties feature a better scalar multiplication performance than elliptic curves. This allows fast arithmetic in these groups, which can speed up the calculations with a factor 3 compared with elliptic curves and hence speed up the cryptosystem. Another advantage is that for groups of cryptographically relevant size, the order of the group can simply be calculated using the characteristic polynomial of the Frobenius endomorphism. This is not the case, for example, in elliptic curve cryptography when the group of points of an elliptic curve over a prime field is used for cryptographic purpose. However, to represent an element of the trace zero variety more bits are needed compared with elements of elliptic or hyperelliptic curves. Another disadvantage is the fact that it is possible to reduce the security of the TZV of 1/6th of the bit length using cover attack. == Mathematical background == A hyperelliptic curve C of genus g over a prime field F q {\displaystyle \mathbb {F} _{q}} where q = pn (p prime) of odd characteristic is defined as C : y 2 + h ( x ) y = f ( x ) , {\displaystyle C:~y^{2}+h(x)y=f(x),} where f monic, deg(f) = 2g + 1 and deg(h) ≤ g. The curve has at least one F q {\displaystyle \mathbb {F} _{q}} -rational Weierstraßpoint. The Jacobian variety J C ( F q n ) {\displaystyle J_{C}(\mathbb {F} _{q^{n}})} of C is for all finite extension F q n {\displaystyle \mathbb {F} _{q^{n}}} isomorphic to the ideal class group Cl ⁡ ( C / F q n ) {\displaystyle \operatorname {Cl} (C/\mathbb {F} _{q^{n}})} . With the Mumford's representation it is possible to represent the elements of J C ( F q n ) {\displaystyle J_{C}(\mathbb {F} _{q^{n}})} with a pair of polynomials [u, v], where u, v ∈ F q n [ x ] {\displaystyle \mathbb {F} _{q^{n}}[x]} . The Frobenius endomorphism σ is used on an element [u, v] of J C ( F q n ) {\displaystyle J_{C}(\mathbb {F} _{q^{n}})} to raise the power of each coefficient of that element to q: σ([u, v]) = [uq(x), vq(x)]. The characteristic polynomial of this endomorphism has the following form: χ ( T ) = T 2 g + a 1 T 2 g − 1 + ⋯ + a g T g + ⋯ + a 1 q g − 1 T + q g , {\displaystyle \chi (T)=T^{2g}+a_{1}T^{2g-1}+\cdots +a_{g}T^{g}+\cdots +a_{1}q^{g-1}T+q^{g},} where ai in Z {\displaystyle \mathbb {Z} } With the Hasse–Weil theorem it is possible to receive the group order of any extension field F q n {\displaystyle \mathbb {F} _{q^{n}}} by using the complex roots τi of χ(T): | J C ( F q n ) | = ∏ i = 1 2 g ( 1 − τ i n ) {\displaystyle |J_{C}(\mathbb {F} _{q^{n}})|=\prod _{i=1}^{2g}(1-\tau _{i}^{n})} Let D be an element of the J C ( F q n ) {\displaystyle J_{C}(\mathbb {F} _{q^{n}})} of C, then it is possible to define an endomorphism of J C ( F q n ) {\displaystyle J_{C}(\mathbb {F} _{q^{n}})} , the so-called trace of D: Tr ⁡ ( D ) = ∑ i = 0 n − 1 σ i ( D ) = D + σ ( D ) + ⋯ + σ n − 1 ( D ) {\displaystyle \operatorname {Tr} (D)=\sum _{i=0}^{n-1}\sigma ^{i}(D)=D+\sigma (D)+\cdots +\sigma ^{n-1}(D)} Based on this endomorphism one can reduce the Jacobian variety to a subgroup G with the property, that every element is of trace zero: G = { D ∈ J C ( F q n ) | Tr ( D ) = 0 } , ( 0 neutral element in J C ( F q n ) {\displaystyle G=\{D\in J_{C}(\mathbb {F} _{q^{n}})~|~{\text{Tr}}(D)={\textbf {0}}\},~~~({\textbf {0}}{\text{ neutral element in }}J_{C}(\mathbb {F} _{q^{n}})} G is the kernel of the trace endomorphism and thus G is a group, the so-called trace zero (sub)variety (TZV) of J C ( F q n ) {\displaystyle J_{C}(\mathbb {F} _{q^{n}})} . The intersection of G and J C ( F q ) {\displaystyle J_{C}(\mathbb {F} _{q})} is produced by the n-torsion elements of J C ( F q ) {\displaystyle J_{C}(\mathbb {F} _{q})} . If the greatest common divisor gcd ( n , | J C ( F q ) | ) = 1 {\displaystyle \gcd(n,|J_{C}(\mathbb {F} _{q})|)=1} the intersection is empty and one can compute the group order of G: | G | = | J C ( F q n ) | | J C ( F q ) | = ∏ i = 1 2 g ( 1 − τ i n ) ∏ i = 1 2 g ( 1 − τ i ) {\displaystyle |G|={\dfrac {|J_{C}(\mathbb {F} _{q^{n}})|}{|J_{C}(\mathbb {F} _{q})|}}={\dfrac {\prod _{i=1}^{2g}(1-\tau _{i}^{n})}{\prod _{i=1}^{2g}(1-\tau _{i})}}} The actual group used in cryptographic applications is a subgroup G0 of G of a large prime order l. This group may be G itself. There exist three different cases of cryptographical relevance for TZV: g = 1, n = 3 g = 1, n = 5 g = 2, n = 3 == Arithmetic == The arithmetic used in the TZV group G0 based on the arithmetic for the whole group J C ( F q n ) {\displaystyle J_{C}(\mathbb {F} _{q^{n}})} , But it is possible to use the Frobenius endomorphism σ to speed up the scalar multiplication. This can be archived if G0 is generated by D of order l then σ(D) = sD, for some integers s. For the given cases of TZV s can be computed as follows, where ai come from the characteristic polynomial of the Frobenius endomorphism : For g = 1, n = 3: s = q − 1 1 − a 1 mod ℓ {\displaystyle s={\dfrac {q-1}{1-a_{1}}}{\bmod {\ell }}} For g = 1, n = 5: s = q 2 − q − a 1 2 q + a 1 q + 1 q − 2 a 1 q + a 1 3 − a 1 2 + a 1 − 1 mod ℓ {\displaystyle s={\dfrac {q^{2}-q-a_{1}^{2}q+a_{1}q+1}{q-2a_{1}q+a_{1}^{3}-a_{1}^{2}+a_{1}-1}}{\bmod {\ell }}} For g = 2, n = 3: s = − q 2 − a 2 + a 1 a 1 q − a 2 + 1 mod ℓ {\displaystyle s=-{\dfrac {q^{2}-a_{2}+a_{1}}{a_{1}q-a_{2}+1}}{\bmod {\ell }}} Knowing this, it is possible to replace any scalar multiplication mD (|m| ≤ l/2) with: m 0 D + m 1 σ ( D ) + ⋯ + m n − 1 σ n − 1 ( D ) , where m i = O ( ℓ 1 / ( n − 1 ) ) = O ( q g ) {\displaystyle m_{0}D+m_{1}\sigma (D)+\cdots +m_{n-1}\sigma ^{n-1}(D),~~~~{\text{where }}m_{i}=O(\ell ^{1/(n-1)})=O(q^{g})} With this trick the multiple scalar product can be reduced to about 1/(n − 1)th of doublings necessary for calculating mD, if the implied constants are small enough. == Security == The security of cryptographic systems based on trace zero subvarieties according to the results of the papers comparable to the security of hyper-elliptic curves of low genus g' over F p ′ {\displaystyle \mathbb {F} _{p'}} , where p' ~ (n − 1)(g/g' ) for |G| ~128 bits. For the cases where n = 3, g = 2 and n = 5, g = 1 it is possible to reduce the security for at most 6 bits, where |G| ~ 2256, because one can not be sure that G is contained in a Jacobian of a curve of genus 6. The security of curves of genus 4 for similar fields are far less secure. == Cover attack on a trace zero crypto-system == The attack published in shows, that the DLP in trace zero groups of genus 2 over finite fields of characteristic diverse than 2 or 3 and a field extension of degree 3 can be transformed into a DLP in a class group of degree 0 with genus of at most 6 over the base field. In this new class group the DLP can be attacked with the index calculus methods. This leads to a reduction of the bit length 1/6th.

  Read more →
• 

  Key Transparency

  Key Transparency allows communicating parties to verify public keys used in end-to-end encryption. In many end-to-end encryption services, to initiate communication a user will reach out to a central server and request the public keys of the user with which they wish to communicate. If the central server is malicious or becomes compromised, a man-in-the-middle attack can be launched through the issuance of incorrect public keys. The communications can then be intercepted and manipulated. Additionally, legal pressure could be applied by surveillance agencies to manipulate public keys and read messages. With Key Transparency, public keys are posted to a public log that can be universally audited. Communicating parties can verify public keys used are accurate.

  Read more →
• 

  Inauthentic text

  An inauthentic text is a computer-generated expository document meant to appear as genuine, but which is actually meaningless. Frequently they are created in order to be intermixed with genuine documents and thus manipulate the results of search engines, as with Spam blogs. They are also carried along in email in order to fool spam filters by giving the spam the superficial characteristics of legitimate text. Sometimes nonsensical documents are created with computer assistance for humorous effect, as with Dissociated press or Flarf poetry. They have also been used to challenge the veracity of a publication—MIT students submitted papers generated by a computer program called SCIgen to a conference, where they were initially accepted. This led the students to claim that the bar for submissions was too low. With the amount of computer generated text outpacing the ability of people to humans to curate it, there needs some means of distinguishing between the two. Yet automated approaches to determining absolutely whether a text is authentic or not face intrinsic challenges of semantics. Noam Chomsky coined the phrase "Colorless green ideas sleep furiously" giving an example of grammatically correct, but semantically incoherent sentence; some will point out that in certain contexts one could give this sentence (or any phrase) meaning. The first group to use the expression in this regard can be found below from Indiana University. Their work explains in detail an attempt to detect inauthentic texts and identify pernicious problems of inauthentic texts in cyberspace. The site has a means of submitting text that assesses, based on supervised learning, whether a corpus is inauthentic or not. Many users have submitted incorrect types of data and have correspondingly commented on the scores. This application is meant for a specific kind of data; therefore, submitting, say, an email, will not return a meaningful score.

  Read more →
• 

  Multiple encryption

  Multiple encryption is the process of encrypting an already encrypted message one or more times, either using the same or a different algorithm. It is also known as cascade encryption, cascade ciphering, cipher stacking, multiple encryption, and superencipherment. Superencryption refers to the outer-level encryption of a multiple encryption. Some cryptographers, like Matthew Green of Johns Hopkins University, say multiple encryption addresses a problem that mostly doesn't exist: Modern ciphers rarely get broken... You’re far more likely to get hit by malware or an implementation bug than you are to suffer a catastrophic attack on Advanced Encryption Standard (AES). However, from the previous quote an argument for multiple encryption can be made, namely poor implementation. Using two different cryptomodules and keying processes from two different vendors requires both vendors' wares to be compromised for security to fail completely. == Independent keys == Picking any two ciphers, if the key used is the same for both, the second cipher could possibly undo the first cipher, partly or entirely. This is true of ciphers where the decryption process is exactly the same as the encryption process (a reciprocal cipher) – the second cipher would completely undo the first. If an attacker were to recover the key through cryptanalysis of the first encryption layer, the attacker could possibly decrypt all the remaining layers, assuming the same key is used for all layers. To prevent that risk, one can use keys that are statistically independent for each layer (e.g. independent RNGs). Ideally each key should have separate and different generation, sharing, and management processes. == Independent Initialization Vectors == For en/decryption processes that require sharing an Initialization Vector (IV) / nonce these are typically, openly shared or made known to the recipient (and everyone else). Its good security policy never to provide the same data in both plaintext and ciphertext when using the same key and IV. Therefore, its recommended (although at this moment without specific evidence) to use separate IVs for each layer of encryption. == Importance of the first layer == With the exception of the one-time pad, no cipher has been theoretically proven to be unbreakable. Furthermore, some recurring properties may be found in the ciphertexts generated by the first cipher. Since those ciphertexts are the plaintexts used by the second cipher, the second cipher may be rendered vulnerable to attacks based on known plaintext properties (see references below). This is the case when the first layer is a program P that always adds the same string S of characters at the beginning (or end) of all ciphertexts (commonly known as a magic number). When found in a file, the string S allows an operating system to know that the program P has to be launched in order to decrypt the file. This string should be removed before adding a second layer. To prevent this kind of attack, one can use the method provided by Bruce Schneier: Generate a random pad R of the same size as the plaintext. Encrypt R using the first cipher and key. XOR the plaintext with the pad, then encrypt the result using the second cipher and a different (!) key. Concatenate both ciphertexts in order to build the final ciphertext. A cryptanalyst must break both ciphers to get any information. This will, however, have the drawback of making the ciphertext twice as long as the original plaintext. Note, however, that a weak first cipher may merely make a second cipher that is vulnerable to a chosen plaintext attack also vulnerable to a known plaintext attack. However, a block cipher must not be vulnerable to a chosen plaintext attack to be considered secure. Therefore, the second cipher described above is not secure under that definition, either. Consequently, both ciphers still need to be broken. The attack illustrates why strong assumptions are made about secure block ciphers and ciphers that are even partially broken should never be used. == The Rule of Two == The Rule of Two is a data security principle from the NSA's Commercial Solutions for Classified Program (CSfC). It specifies two completely independent layers of cryptography to protect data. For example, data could be protected by both hardware encryption at its lowest level and software encryption at the application layer. It could mean using two FIPS-validated software cryptomodules from different vendors to en/decrypt data. The importance of vendor and/or model diversity between the layers of components centers around removing the possibility that the manufacturers or models will share a vulnerability. This way if one components is compromised there is still an entire layer of encryption protecting the information at rest or in transit. The CSfC Program offers solutions to achieve diversity in two ways. "The first is to implement each layer using components produced by different manufacturers. The second is to use components from the same manufacturer, where that manufacturer has provided NSA with sufficient evidence that the implementations of the two components are independent of one another." The principle is practiced in the NSA's secure mobile phone called Fishbowl. The phones use two layers of encryption protocols, IPsec and Secure Real-time Transport Protocol (SRTP), to protect voice communications. The Samsung Galaxy S9 Tactical Edition is also an approved CSfC Component.

  Read more →
• 

  Messaging Layer Security

  Messaging Layer Security (MLS) is a security layer for end-to-end encrypted messages. It is maintained by the MLS working group of the Internet Engineering Task Force (IETF), and is designed to provide an efficient and practical security mechanism for groups as large as 50,000 and for those who access chat systems from multiple devices. == Security properties == Security properties of MLS include message confidentiality, message integrity and authentication, membership authentication, asynchronicity, forward secrecy, post-compromise security, and scalability. == History == The idea was born in 2016 and first discussed in an unofficial meeting during IETF 96 in Berlin with attendees from Wire, Mozilla and Cisco. Initial ideas were based on pairwise encryption for secure 1:1 and group communication. In 2017, an academic paper introducing Asynchronous Ratcheting Trees was published by the University of Oxford and Facebook setting the focus on more efficient encryption schemes. The first BoF took place in February 2018 at IETF 101 in London. The founding members are Mozilla, Facebook, Wire, Google, Twitter, University of Oxford, and INRIA. On March 29, 2023, the IETF approved publication of Messaging Layer Security (MLS) as a new standard. It was officially published on July 19, 2023. At that time, Google announced it intended to add MLS to the end to end encryption used by Google Messages over Rich Communication Services (RCS). In March 2025, the GSMA announced the Universal Profile 3.0 standard of RCS would support MLS and Apple announced it would support this RCS standard on Apple Messages. Both Google Messages and Apple Messages began the rollout of MLS E2EE over RCS in May 2026. Matrix is one of the protocols declaring migration to MLS. In 2026, Discord rolled out end-to-end encryption on voice and video calls, using MLS for scalable group key exchanges. Research on adding post-quantum cryptography (PQC) to MLS is ongoing. The IETF has prepared an Internet-Draft using PQC algorithms in MLS. == Implementations ==

  Read more →