AI Data Center Zoning

AI Data Center Zoning — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

Inverse consistency

In image registration, inverse consistency measures the consistency of mappings between images produced by a registration algorithm. The inverse consistency error, introduced by Christiansen and Johnson in 2001, quantifies the distance between the composition of the mappings from each image to the other, produced by the registration procedure, and the identity function, and is used as a regularisation constraint in the loss function of many registration algorithms to enforce consistent mappings. Inverse consistency is necessary for good image registration but it is not sufficient, since a mapping can be perfectly consistent but not register the images at all. == Definition == Image registration is the process of establishing a common coordinate system between two images, and given two images I 1 : Ω 1 → R I 2 : Ω 2 → R {\displaystyle {\begin{aligned}I_{1}:\Omega _{1}\to \mathbb {R} \\I_{2}:\Omega _{2}\to \mathbb {R} \end{aligned}}} registering a source image I 1 {\displaystyle I_{1}} to a target image I 2 {\displaystyle I_{2}} consists of determining a transformation f 1 : Ω 2 → Ω 1 {\displaystyle f_{1}:\Omega _{2}\to \Omega _{1}} that maps points from the target space to the source space. An ideal registration algorithm should not be sensitive to which image in the pair is used as source or target, and the registration operator should be antisymmetric such that the mappings f 1 : Ω 2 → Ω 1 f 2 : Ω 1 → Ω 2 {\displaystyle {\begin{aligned}f_{1}:\Omega _{2}\to \Omega _{1}\\f_{2}:\Omega _{1}\to \Omega _{2}\end{aligned}}} produced when registering I 1 {\displaystyle I_{1}} to I 2 {\displaystyle I_{2}} and I 2 {\displaystyle I_{2}} to I 1 {\displaystyle I_{1}} respectively should be the inverse of each other, i.e. f 2 = f 1 − 1 {\displaystyle f_{2}=f_{1}^{-1}} and f 1 = f 2 − 1 {\displaystyle f_{1}=f_{2}^{-1}} or, equivalently, f 2 ∘ f 1 = id Ω 2 {\displaystyle f_{2}\circ f_{1}=\operatorname {id} _{\Omega _{2}}} and f 1 ∘ f 2 = id Ω 1 {\displaystyle f_{1}\circ f_{2}=\operatorname {id} _{\Omega _{1}}} , where ∘ {\displaystyle \circ } denotes the function composition operator. Real algorithms are not perfect, and when swapping the role of source and target image in a registration problem the so obtained transformations are not the inverse of each other. Inverse consistency can be enforced by adding to the loss function of the registration a symmetric regularisation term that penalises inconsistent transformations ∫ Ω 2 ‖ f 2 ( f 1 ( x ) ) − x ‖ 2 d x + ∫ Ω 1 ‖ f 1 ( f 2 ( x ) ) − x ‖ 2 d x . {\displaystyle \int _{\Omega _{2}}\left\Vert f_{2}(f_{1}(x))-x\right\Vert ^{2}\mathrm {d} x+\int _{\Omega _{1}}\left\Vert f_{1}(f_{2}(x))-x\right\Vert ^{2}\mathrm {d} x.} Inverse consistency can be used as a quality metric to evaluate image registration results. The inverse consistency error ( I C E {\displaystyle ICE} ) measures the distance between the composition of the two transforms and the identity function, and it can be formulated in terms of both average ( I C E a {\displaystyle ICE_{a}} ) or maximum ( I C E m {\displaystyle ICE_{m}} ) over a region of interest Ω {\displaystyle \Omega } of the image: I C E a = 1 ∫ Ω d x ∫ Ω ‖ f 2 ( f 1 ( x ) ) − x ‖ d x I C E m = max x ∈ Ω ‖ f 2 ( f 1 ( x ) ) − x ‖ . {\displaystyle {\begin{aligned}ICE_{a}&={\frac {1}{\int _{\Omega }\mathrm {d} x}}\int _{\Omega }\left\Vert f_{2}(f_{1}(x))-x\right\Vert \mathrm {d} x\\ICE_{m}&=\max _{x\in \Omega }\left\Vert f_{2}(f_{1}(x))-x\right\Vert .\end{aligned}}} While inverse consistency is a necessary property of good registration algorithms, inverse consistency error alone is not a sufficient metric to evaluate the quality of image registration results, since a perfectly consistent mapping, with no other constraint, may be not even close to correctly register a pair of images.
Read more →
Horus Music

Horus Music Limited is a global digital distribution and label services company. Established in 2006, Horus Music allows artists, labels and right-holders to send their music to over 200 download, streaming, and interactive platforms including iTunes, Google Play, Amazon, VEVO, 7digital, Spotify, Beatport, Deezer, Tidal, as well as offering digital marketing and playlisting opportunities. == History == The company were named Best Business Partner of 2014 by Huawei Technology of China, and were also a finalist in the International Trade category as part of the Leicester Mercury Business Awards during that same year. Their client base consists of unsigned and independent musicians and record labels, as well as well known recording artists. In November 2015, Horus Music sponsored the UK’s first Independent Label Week, in order to highlight the music that is released by the UK’s indie labels. In 2016, Horus Music celebrated their 10th anniversary Horus Music's sister companies Help for Bands and Help For Writers, provide advice and opportunities for musicians and E-book distribution for writers, respectively. Anara Publishing opened in 2017 which allows the company to work closely with a handpicked roster of musicians to provide royalty administration and sync licensing services. On 21 April 2017, Her Majesty Queen Elizabeth II’s 91st birthday, Horus Music was awarded with the Queen’s Award for Enterprise in International Trade. In 2021, Horus Music, UnitedMasters, and Symphonic Distribution partnered with pioneering music fintech company, beatBread, to offer clients access to more capital. beatBread's chordCashAI technology provides an automated advance experience for independent musicians while enable clients to choose their own terms and retain ownership of their music. == Clients == Horus Music has partnered with a number of charities including Save the Children, for the recording "Look into Your Heart", featuring Beverley Knight with Rolling Stones' Mick Jagger and Ronnie Wood, 100% of proceeds from the single were donated to the charity. The Pixel Project, who produced songs about violence against women and the blood cancer charity Bloodwise. The company have spoken openly about the state of the music industry and artists' rights and were one of the first distributors to remove their catalogue from Rdio after the streaming service was acquired by Pandora. Their relationships with artists and labels, as well as leading industry contacts, means they have the ability to work with musicians in a myriad of ways, including offering performance opportunities and even local auditions for TV shows such as The Voice UK. == Horus Music India == Horus Music India opened in 2016 and is based in Mumbai. By opening Horus Music India, the company are able to expand on their local connections as well as to provide a much more personalised service to musicians based in this area. The appointment of two Business Development Managers in India cemented their move.
Read more →
Digital entertainment

Digital entertainment Industry includes, but is not restricted to, any combination of the following industries (that themselves have a considerable degree of overlap): digital media new media video on demand video games interactive entertainment online gambling mobile entertainment social media streaming services "Digital entertainment", largely a hard to define marketing term, rests upon entertainment technology and ultimately on the enabling basic technologies computers, Internet/World Wide Web, digital rights management, multimedia and streaming media. Apart from pure entertainment, the term rests upon the observation that already in 2011 in the UK, for example, "nearly half of people’s waking hours are spent using media content and communications services" ("screen time"). Digital entertainment is inextricably connected with digital marketing. People who follow influencers on social media for entertainment will receive a fair share of advertising at the same time. Digital merchandise is distributed with every computer game and popup ads or similar are ubiquitous in the online (gaming) world.
Read more →
Comparison of user features of operating systems

Comparison of user features of operating systems refers to a comparison of the general user features of major operating systems in a narrative format. It does not encompass a full exhaustive comparison or description of all technical details of all operating systems. It is a comparison of basic roles and the most prominent features. It also includes the most important features of the operating system's origins, historical development, and role. == Overview == An operating system (OS) is system software that manages computer hardware, software resources, and provides common services for computer programs. Time-sharing operating systems schedule tasks for efficient use of the system and may also include accounting software for cost allocation of processor time, mass storage, printing, and other resources. For hardware functions such as input and output and memory allocation, the operating system acts as an intermediary between programs and the computer hardware, although the application code is usually executed directly by the hardware and frequently makes system calls to an OS function or is interrupted by it. Operating systems are found on many devices that contain a computer – from cellular phones and video game consoles to web servers and supercomputers. As of June 2024, the dominant general-purpose desktop operating system is Microsoft Windows with a market share of around 72.91%. macOS by Apple Inc. is in second place (14.93%), and the varieties of Linux are collectively in third place (4.04%). In the mobile sector, including both smartphones and tablets, Android is dominant with a market share of 71%, followed by Apple's iOS with 28%; for smartphones alone, Android has 72% and iOS has 28%. Linux distributions are dominant in the server and supercomputing sectors. Other specialized classes of operating systems (special-purpose operating systems)), such as embedded and real-time systems, exist for many applications. Security-focused operating systems also exist. Some operating systems have low system requirements (i.e. light-weight Linux distribution). Others may have higher system requirements. Some operating systems require installation or may come pre-installed with purchased computers (OEM-installation), whereas others may run directly from media (i.e. live cd) or flash memory (i.e. USB stick). == MS-DOS == === Overview === MS-DOS (acronym for Microsoft Disk Operating System) is an operating system for x86-based personal computers mostly developed by Microsoft. Collectively, MS-DOS, its rebranding as IBM PC DOS, and some operating systems attempting to be compatible with MS-DOS, are sometimes referred to as "DOS" (which is also the generic acronym for disk operating system). MS-DOS was the main operating system for IBM PC compatible personal computers during the 1980s, from which point it was gradually superseded by operating systems offering a graphical user interface (GUI), in various generations of the graphical Microsoft Windows operating system. IBM licensed and re-released it in 1981 as PC DOS 1.0 for use in its PCs. Although MS-DOS and PC DOS were initially developed in parallel by Microsoft and IBM, the two products diverged after twelve years, in 1993, with recognizable differences in compatibility, syntax, and capabilities. During its lifetime, several competing products were released for the x86 platform, and MS-DOS went through eight versions, until development ceased in 2000. Initially, MS-DOS was targeted at Intel 8086 processors running on computer hardware using floppy disks to store and access not only the operating system, but application software and user data as well. Progressive version releases delivered support for other mass storage media in ever greater sizes and formats, along with added feature support for newer processors and rapidly evolving computer architectures. Ultimately, it was the key product in Microsoft's development from a programming language company to a diverse software development firm, providing the company with essential revenue and marketing resources. It was also the underlying basic operating system on which early versions of Windows ran as a GUI. == Microsoft Windows == === Overview === Microsoft Windows, commonly referred to as Windows, is a group of several proprietary graphical operating system families, all of which are developed and marketed by Microsoft. Each family caters to a certain sector of the computing industry. Active Microsoft Windows families include Windows NT and Windows IoT; these may encompass subfamilies, (e.g. Windows Server or Windows Embedded Compact) (Windows CE). Defunct Microsoft Windows families include Windows 9x, Windows Mobile, and Windows Phone. Microsoft announced an operating environment named Windows on 10 November 1983, as a graphical operating system shell for MS-DOS in response to the growing interest in graphical user interfaces (GUIs); Windows 1.0 first shipped on 20 November 1985. Microsoft Windows came to dominate the world's personal computer (PC) market with over 90% market share, overtaking Mac OS, which had been introduced in 1984, while Microsoft has in 2020 lost its dominance of the consumer operating system market, with Windows down to 30%, lower than Apple's 31% mobile-only share (65% for desktop operating systems only, i.e. "PCs" vs. Apple's 28% desktop share) in its home market, the US, and 32% globally (77% for desktops), where Google's Android leads. Apple came to see Windows as an unfair encroachment on their innovation in GUI development as implemented on products such as the Lisa and Macintosh (eventually settled in court in Microsoft's favor in 1993). As of January 2023, on PCs, Windows is still the most popular operating system in all countries. However, in 2014, Microsoft admitted losing the majority of the overall operating system market to Android, because of the massive growth in sales of Android smartphones. In 2014, the number of Windows devices sold was less than 25% that of Android devices sold. This comparison, however, may not be fully relevant, as the two operating systems traditionally target different platforms. Still, numbers for server use of Windows (that are comparable to competitors) show one third market share, similar to that for end user use. As of October 2020, the most recent version of Windows for PCs, tablets and embedded devices is Windows 10, version 20H2. The most recent version for server computers is Windows Server, version 20H2. A specialized version of Windows also runs on the Xbox One video game console. === Windows 95 === Windows 95 introduced a redesigned shell based around a desktop metaphor; File shortcuts (also known as shell links) were introduced and the desktop was re-purposed to hold shortcuts to applications, files and folders, reminiscent of Mac OS. In Windows 3.1 the desktop was used to display icons of running applications. In Windows 95, the currently running applications were displayed as buttons on a taskbar across the bottom of the screen. The taskbar also contained a notification area used to display icons for background applications, a volume control and the current time. The Start menu, invoked by clicking the "Start" button on the taskbar or by pressing the Windows key, was introduced as an additional means of launching applications or opening documents. While maintaining the program groups used by its predecessor Program Manager, it also displayed applications within cascading sub-menus. The previous File Manager program was replaced by Windows Explorer and the Explorer-based Control Panel and several other special folders were added such as My Computer, Dial Up Networking, Recycle Bin, Network Neighborhood, My Documents, Recent documents, Fonts, Printers, and My Briefcase among others. AutoRun was introduced for CD drives. The user interface looked dramatically different from prior versions of Windows, but its design language did not have a special name like Metro, Aqua or Material Design. Internally it was called "the new shell" and later simply "the shell". The subproject within Microsoft to develop the new shell was internally known as "Stimpy". In 1994, Microsoft designers Mark Malamud and Erik Gavriluk approached Brian Eno to compose music for the Windows 95 project. The result was the six-second start-up music-sound of the Windows 95 operating system, The Microsoft Sound and it was first released as a startup sound in May 1995 on Windows 95 May Test Release build 468. When released for Windows 95 and Windows NT 4.0, Internet Explorer 4 came with an optional Windows Desktop Update, which modified the shell to provide several additional updates to Windows Explorer, including a Quick Launch toolbar, and new features integrated with Internet Explorer, such as Active Desktop (which allowed Internet content to be displayed directly on the desktop). Some of the user interface elements introduced in Windows 95, such as the desktop, taskbar, Start menu and Windows
Read more →
Infogram

Infogram is a web-based data visualization and infographics platform, created in Riga, Latvia. It allows people to make and share digital charts, infographics and maps. Infogram offers an intuitive WYSIWYG editor that converts users’ data into infographics that can be published, embedded or shared. Users do not need coding skills to use this tool; users include newsrooms, marketing teams, governments, educators and students. The company that created Infogram, also called Infogram, was founded in 2012 in Riga, Latvia and has another office in San Francisco. As of October 2017, Infogram says it has 3 million users who have created charts and infographics that have been viewed more than 1.5 billion times. Infogram was bought by Prezi, a web-based presentation software company, in May 2017. == History == Infogram was founded in February 2012 in Riga, Latvia by Uldis Leiterts, Raimonds Kaže and Alise Dīrika. In January 2013, Infogram won the international Hy Berlin pitch contest. During his pitch, Infogram CEO Uldis Leiterts announced that the company had created more templates and was working with Microsoft to integrate its platform with the contemporaneous version of Microsoft Office. The company also won the 2013 Kantar Information Is Beautiful Award, which “celebrates excellence and beauty in data visualizations, infographics, interactives & information art.” In December 2014, Infogram acquired the Brazil-based data visualization blog, Visualoop. In an effort to expand sales and marketing in the U.S., Infogram secured $1.8 million in funding in February 2014. The announcement was made at TechChill, a startup conference for the Baltics in Riga, Latvia. At the time, the funding was believed to be the largest to date for the company. Infogram won the 2017 National Design Award of Latvia. == Acquisition by Prezi == Prezi, a web-based presentation software company, acquired Infogram in May 2017. Infogram is now a wholly owned subsidiary of Prezi. Infogram was rated #1 on Forbes’ list of “The Best Infographic Tools for 2017,” which was published in September 2017. In October 2017, Infogram announced a new version of its data visualization platform, including a drag-and-drop editor, over 40 new designer templates and social media support.
Read more →
Digital Cinema Package

A Digital Cinema Package (DCP) is a collection of digital files used to store and convey digital cinema (DC) audio, image, and data streams. The term was popularized by Digital Cinema Initiatives, LLC in its original recommendation for packaging DC contents. However, the industry tends to apply the term to the structure more formally known as the composition. A DCP is a container format for compositions, a hierarchical file structure that represents a title version. The DCP may carry a partial composition (e.g. not a complete set of files), a single complete composition, or multiple and complete compositions. The composition consists of a Composition Playlist (in XML format) that defines the playback sequence of a set of Track Files. Track Files carry the essence (audio, image, subtitles), which is wrapped using Material eXchange Format (MXF). Track Files must contain only one essence type. Two track files at a minimum must be present in every composition (see SMPTE ST429-2 D-Cinema Packaging – DCP Constraints, or Cinepedia): a track file carrying picture essence, and a track file carrying audio essence. The composition, consisting of a Composition Playlist (CPL) and associated track files, are distributed as a Digital Cinema Package (DCP). A composition is a complete representation of a title version, while the DCP need not carry a full composition. However, as already noted, it is commonplace in the industry to discuss the title in terms of a DCP, as that is the deliverable to the cinema. The Picture Track File essence is compressed using JPEG 2000 and the Audio Track File carries a 24-bit linear PCM uncompressed multichannel WAV file. Encryption may optionally be applied to the essence of a track file to protect it from unauthorized use. The encryption used is AES 128-bit in CBC mode. In practice, there are two versions of composition in use. The original version is called Interop DCP. In 2009, a specification was published by SMPTE (SMPTE ST 429-2 Digital Cinema Packaging – DCP Constraints) for what is commonly referred to as SMPTE DCP. SMPTE DCP is similar but not backwards compatible with Interop DCP, resulting in an uphill effort to transition the industry from Interop DCP to SMPTE DCP. SMPTE DCP requires significant constraints to ensure success in the field, as shown by ISDCF. While legacy support for Interop DCP is necessary for commercial products, new productions are encouraged to be distributed in SMPTE DCP. == Technical specifications == The DCP root folder (in the storage medium) contains a number of files, some used to store the image and audio contents, and some other used to organize and manage the whole playlist. === Picture MXF files === Picture contents may be stored in one or more reels corresponding to one or more MXF files. Each reel contains pictures as MPEG-2 or JPEG 2000 essence, depending on the adopted codec. MPEG-2 is no longer compliant with the DCI specification. JPEG 2000 is the only accepted compression format. Supported frame rates are: SMPTE (JPEG 2000) 24, 25, 30, 48, 50, and 60 fps @ 2K 24, 25, and 30 fps @ 4K 24 and 48 fps @ 2K stereoscopic MXF Interop (JPEG 2000) – Deprecated 24 and 48 fps @ 2K (MXF Interop can be encoded at 25 frame/s but support is not guaranteed) 24 fps @ 4K 24 fps @ 2K stereoscopic MXF Interop (MPEG-2) – Deprecated 23.976 and 24 fps @ 1920 × 1080 Maximum frame sizes are 2048 × 1080 for 2K DC, and 4096 × 2160 for 4K DC. Common formats are: SMPTE (JPEG 2000) Flat (1998 × 1080 or 3996 × 2160), = 1.85:1 aspect ratio Scope (2048 × 858 or 4096 × 1716), ~2.39:1 aspect ratio HDTV (1920 × 1080 or 3840 × 2160), 16:9 aspect ratio (~1.78:1) (although not specifically defined in the DCI specification, this resolution is DCI compliant per section 8.4.3.2). Full (2048 × 1080 or 4096 × 2160) (~1.9:1 aspect ratio, official name by DCI is Full Container. Not widely accepted in cinemas.) MXF Interop (MPEG-2) – Deprecated Full Frame (1920 × 1080) 12 bits per component precision (36 bits total per pixel) XYZ' colorspace; the prime mark indicates gamma encoding (gamma=2.6) Maximum bit rate is 250 Mbit/s (1.3 MBytes per frame at 24 frame per second) === Sound MXF files === Sound contents are also stored in reels corresponding to picture reels in number and duration. In case of multilingual features, separate reels are required to convey different languages. Each file contains linear PCM essence. Sampling rate is 48,000 or 96,000 samples per second Sample precision of 24 bits Linear mapping (no companding) Up to 16 independent channels === Asset map file === List of all files included in the DCP, in XML format. === Composition playlist file === Defines the playback order during presentation. The order is saved in XML format in this file; each picture and sound reel is identified by its UUID. In the following example, a reel is composed by picture and sound: === Packing list file or package key list (PKL) === All files in the composition are hashed and their hash is stored here, in XML format. This file is generally used during ingestion in a digital cinema server to verify if data have been corrupted or tampered with in some way. For example, an MXF picture reel is identified by the following element: The hash value is the Base64 encoding of the SHA-1 checksum. It can be calculated with the command: openssl sha1 -binary "FILE_NAME" | openssl base64 === Volume index file === A single DCP may be stored in more than one medium (e.g., multiple hard disks). The XML file VOLINDEX is used to identify the volume order in the series. == 3D DCP == The DCP format is also used to store stereoscopic (3D) contents for 3D films. In this case, 48 frames exist for every second – 24 frames for the left eye, 24 frames for the right. Depending on the projection system used, the left eye and right eye pictures are either shown alternately (double or triple flash systems) at 48 fps or, on 4k systems, both left and right eye pictures are shown simultaneously, one above the other, at 24 fps. In triple flash systems, active shutter glasses are required whereas optical filtering such as circular polarisation is used in conjunction with passive glasses on polarized systems. Since the maximum bit rate is always 250 Mbit/s, this results in a net 125 Mbit/s for single frame, but the visual quality decrease is generally unnoticeable. == D-Box == D-Box codes for motion controlled seating (labelled as "Motion Data" in the DCP specification), if present, are stored as a monoaural WAV file on Sound Track channel 13. Motion Data tracks are unencrypted and not watermarked. == Creation == Most film producers and distributors rely on digital cinema encoding facilities to produce and quality control check a digital cinema package before release. Facilities follow strict guidelines set out in the DCI recommendations to ensure compatibility with all digital cinema equipment. For bigger studio release films, the facility will usually create a Digital Cinema Distribution Master (DCDM). A DCDM is the post-production step prior to a DCP. The frames are in XYZ TIFF format and both sound and picture are not yet wrapped into MXF files. A DCP can be encoded directly from a DCDM. A DCDM is useful for archiving purposes and also facilities can share them for international re-versioning purposes. They can easily be turned into alternative version DCPs for foreign territories. For smaller release films, the facility will usually skip the creation of a DCDM and instead encode directly from the Digital Source Master (DSM) the original film supplied to the encoding facility. A DSM can be supplied in a multitude of formats and color spaces. For this reason, the encoding facility needs to have extensive knowledge in color space handling including, on occasion, the use of 3D LUTs to carefully match the look of the finished DCP to a celluloid film print. This can be a highly involved process in which the DCP and the film print are "butterflied" (shown side by side) in a highly calibrated cinema. Less demanding DCPs are encoded from tape formats such as HDCAM SR. Quality control checks are always performed in calibrated cinemas and carefully checked for errors. QC checks are often attended by colorists, directors, sound mixers and other personnel to check for correct picture and sound reproduction in the finished DCP. == Accessibility == === Hearing impaired audio === A Hearing Impaired (HI) audio track is designed for people who are hearing-impaired to better hear dialog. Moviegoers can wear headphones which play this audio track synchronized with the film. Hearing Impaired audio is stored in the DCP on Sound Track channel 7. === Audio description === Audio description is narration for people who are blind or visually impaired. Audio description is stored in the DCP as "Visually Impaired-Native" (VI-N) audio on Sound Track channel 8. === Sign Language Video === A Sign Language Video track can be included in a DCP to allow for display of sign la
Read more →
Enterprise social software

Enterprise social software (also known as or regarded as a major component of Enterprise 2.0), comprises social software as used in "enterprise" (business/commercial) contexts. It includes social and networked modifications to corporate intranets and other classic software platforms used by large companies to organize their communication. In contrast to traditional enterprise software, which imposes structure prior to use, enterprise social software tends to encourage use prior to providing structure. Carl Frappaolo and Dan Keldsen defined Enterprise 2.0 in a report written for Association for Information and Image Management (AIIM) as "a system of web-based technologies that provide rapid and agile collaboration, information sharing, emergence and integration capabilities in the extended enterprise". == Applications == === Functionality === Social software for an enterprise must (according to Andrew McAfee, Associate Professor, Harvard Business School) have the following functionality to work well: Search: allowing users to search for other users or content Links: grouping similar users or content together Authoring: including blogs and wikis Tags: allowing users to tag content Extensions: recommendations of users; or content based on profile Signals: allowing people to subscribe to users or content with RSS feeds McAfee recommends installing easy-to-use software which does not impose any rigid structure on users. He envisages an informal roll-out, but on a common platform to enable future collaboration between areas. He also recommends strong and visible managerial support to achieve this. In 2007 Dion Hinchcliffe expanded the list above by adding the following four functions: Freeform function: no barriers to authorship (meaning free from a learning curve or from restrictions) Network-oriented function, requiring web-addressable content in all cases Social function: stressing transparency (to access), diversity (in content and community members) and openness (to structure) Emergence function: requiring the provision of approaches that detect and leverage the collective wisdom of the community Enterprise search differs from a typical web search in its focus on "use within an organization by employees seeking information held internally, in a variety of formats and locations, including databases, document management systems, and other repositories". === Criticism === There has been recent criticism that the adaptation of the social paradigm (e.g. openness and altruistic behavior) does not always work well for the enterprise setting, which led some authors to question the proper functioning of enterprise social software. The findings from a novel study suggests that free and non-anonymous sharing of trusted information (beyond marketing or product information) is significantly influenced by concerns from business users.
Read more →
Spintronics

Spintronics (a portmanteau of spin transport electronics), also known as spin electronics, is the study of the intrinsic spin of the electron and its associated magnetic moment, in addition to its fundamental electronic charge, in solid-state devices. The field of spintronics concerns spin-charge coupling in metallic systems. The analogous effects in insulators fall into the field of multiferroics. Spintronics fundamentally differs from traditional electronics in that, in addition to charge state, electron spins are used as a further degree of freedom, with implications in the efficiency of data storage and transfer. Spintronic systems are most often realised in dilute magnetic semiconductors (DMS) and Heusler alloys and are of particular interest in the field of quantum computing, such as atomtronics computation. == History == Spintronics emerged from discoveries in the 1980s concerning spin-dependent electron transport phenomena in solid-state devices. This includes the observation of spin-polarized electron injection from a ferromagnetic metal to a normal metal by Johnson and Silsbee (1985) and the discovery of giant magnetoresistance independently by Albert Fert et al. and Peter Grünberg et al. (1988). The origin of spintronics can be traced to the ferromagnet/superconductor tunneling experiments pioneered by Meservey and Tedrow and initial experiments on magnetic tunnel junctions by Julliere in the 1970s. The use of semiconductors for spintronics began with the theoretical proposal of a spin field-effect-transistor by Datta and Das in 1990 and of the electric dipole spin resonance by Rashba in 1960. In 2012, persistent spin helices of synchronized electrons were made to persist for more than a nanosecond, a 30-fold increase over earlier efforts, and longer than the duration of a modern processor clock cycle. In 2025, at 60 K (−213.2 °C; −351.7 °F) crystalline nickel(II) iodide (NiI2) was reported to exhibit p-wave magnetism, in which the spins of nickel atoms became arranged in a spiral pattern in two orientations. The orientations can be switched via a small electrical current. Applied in digital devices, this spintronics behavior requires far less current than the conventional charge-based electronics that powers devices such as computers and phones. == Theory == The spin of the electron is an intrinsic angular momentum that is separate from the angular momentum due to its orbital motion. The magnitude of the projection of the electron's spin along an arbitrary axis is 1 2 ℏ {\displaystyle {\tfrac {1}{2}}\hbar } , implying that the electron acts as a fermion by the spin-statistics theorem. Like orbital angular momentum, the spin has an associated magnetic moment, the magnitude of which is expressed as μ = 3 2 q m e ℏ {\displaystyle \mu ={\tfrac {\sqrt {3}}{2}}{\frac {q}{m_{e}}}\hbar } . In a solid, the spins of many electrons can act together to affect the magnetic and electronic properties of a material, for example endowing it with a permanent magnetic moment as in a ferromagnet. In many materials, electron spins are equally present in both the up and the down state, and no transport properties are dependent on spin. A spintronic device requires generation or manipulation of a spin-polarized population of electrons, resulting in an excess of spin up or spin down electrons. The polarization of any spin dependent property X can be written as P X = X ↑ − X ↓ X ↑ + X ↓ {\displaystyle P_{X}={\frac {X_{\uparrow }-X_{\downarrow }}{X_{\uparrow }+X_{\downarrow }}}} . A net spin polarization can be achieved either through creating an equilibrium energy split between spin up and spin down. Methods include putting a material in a large magnetic field (Zeeman effect), the exchange energy present in a ferromagnet or forcing the system out of equilibrium. The period of time that such a non-equilibrium population can be maintained is known as the spin lifetime, τ {\displaystyle \tau } . In a diffusive conductor, a spin diffusion length λ {\displaystyle \lambda } can be defined as the distance over which a non-equilibrium spin population can propagate. Spin lifetimes of conduction electrons in metals are relatively short (typically less than 1 nanosecond). An important research area is devoted to extending this lifetime to technologically relevant timescales. The mechanisms of decay for a spin polarized population can be broadly classified as spin-flip scattering and spin dephasing. Spin-flip scattering is a process inside a solid that does not conserve spin, and can therefore switch an incoming spin up state into an outgoing spin down state. Spin dephasing is the process wherein a population of electrons with a common spin state becomes less polarized over time due to different rates of electron spin precession. In confined structures, spin dephasing can be suppressed, leading to spin lifetimes of milliseconds in semiconductor quantum dots at low temperatures. Superconductors can enhance central effects in spintronics such as magnetoresistance effects, spin lifetimes and dissipationless spin-currents. The simplest method of generating a spin-polarised current in a metal is to pass the current through a ferromagnetic material. The most common applications of this effect involve giant magnetoresistance (GMR) devices. A typical GMR device consists of at least two layers of ferromagnetic materials separated by a spacer layer. When the two magnetization vectors of the ferromagnetic layers are aligned, the electrical resistance will be lower (so a higher current flows at constant voltage) than if the ferromagnetic layers are anti-aligned. This constitutes a magnetic field sensor. Two variants of GMR have been applied in devices: Current-in-plane (CIP), where the electric current flows parallel to the layers and, Current-perpendicular-to-plane (CPP), where the electric current flows in a direction perpendicular to the layers. Other metal-based spintronics devices: Tunnel magnetoresistance (TMR), where CPP transport is achieved by using quantum-mechanical tunneling of electrons through a thin insulator separating ferromagnetic layers. Spin-transfer torque, where a current of spin-polarized electrons is used to control the magnetization direction of ferromagnetic electrodes in the device. Spin-wave logic devices carry information in the phase. Interference and spin-wave scattering can perform logic operations. == Device types == === Spintronic-logic === Non-volatile spin-logic devices to enable scaling are being extensively studied. Spin-transfer, torque-based logic devices that use spins and magnets for information processing have been proposed. These devices are part of the ITRS exploratory road map. Logic-in memory applications are already in the development stage. A 2017 review article can be found in Materials Today. A generalized circuit theory for spintronic integrated circuits has been proposed so that the physics of spin transport can be utilized by SPICE developers and subsequently by circuit and system designers for the exploration of spintronics for "beyond CMOS computing". === Semiconductor === Doped semiconductor materials display dilute ferromagnetism. In recent years, dilute magnetic oxides (DMOs) including ZnO based DMOs and TiO2-based DMOs have been the subject of numerous experimental and computational investigations. N`0 sources (like manganese-doped gallium arsenide (Ga,Mn)As), increase the interface resistance with a tunnel barrier, or using hot-electron injection. Spin detection in semiconductors has been addressed with multiple techniques: Faraday/Kerr rotation of transmitted/reflected photons Circular polarization analysis of electroluminescence Nonlocal spin valve (adapted from Johnson and Silsbee's work with metals) Ballistic spin filtering The latter technique was used to overcome the lack of spin-orbit interaction and materials issues to achieve spin transport in silicon. Because external magnetic fields (and stray fields from magnetic contacts) can cause large Hall effects and magnetoresistance in semiconductors (which mimic spin-valve effects), the only conclusive evidence of spin transport in semiconductors is demonstration of spin precession and dephasing in a magnetic field non-collinear to the injected spin orientation, called the Hanle effect. === Storage media === Antiferromagnetic storage media have been studied as an alternative to ferromagnetism, especially since with antiferromagnetic material the bits can be stored as well as with ferromagnetic material. Instead of the usual definition 0 ↔ 'magnetisation upwards', 1 ↔ 'magnetisation downwards', the states can be, e.g., 0 ↔ 'vertically alternating spin configuration' and 1 ↔ 'horizontally-alternating spin configuration'.). The main advantages of antiferromagnetic material are: insensitivity to data-damaging perturbations by stray fields due to zero net external magnetization; no effect on near particles, implying that antiferromagnetic device elements wo
Read more →
Spotify Kids

Spotify Kids is a Swedish kid-friendly Music streaming service developed by Spotify. It offers curated content for children, including music, audiobooks, lullabies, and bedtime stories, while providing their parents with parental controls. The service is only available to subscribers to Spotify's Premium Family subscription plan. == Function == Spotify Kids is a Swedish Kid-friendly Music Streaming Service that allows children to browse Spotify with parental controls. Using the app, parents can view their children's listening history, block specific songs, and share playlists with their children. The app also includes sing-along songs, playlists designed for young children, and curated audiobooks, lullabies, and bedtime stories. Access is included in Spotify's Premium Family subscription plan, and is exclusive to subscribers to the plan. Users can configure the app for a specific age group upon first launch. The playlists on Spotify Kids are curated by groups including Discovery Kids, Nickelodeon, Universal Pictures, and The Walt Disney Company. All content on the Spotify Kids app is curated by editors. As of March 2021, there were roughly 8,000 songs available on the platform. The design of the Spotify Kids app is colorful, and user interface varies depending on the age group for which the app is configured. Spotify Kids is designed to comply with consent and data collection regulations for apps used by children. TechCrunch explains that it is "designed on a grand scale to drive subscriptions to Spotify's top-tier $14.99-per-month Premium Family Plan." == Release == After being beta tested in Ireland in October 2019, it was released as a beta across the United Kingdom on February 11, 2020. It was later released in Sweden, Denmark, Australia, New Zealand, Mexico, Argentina, and Brazil. On March 31, 2021, it was made available in France, Canada, and the United States.
Read more →
X2 transceiver

The X2 transceiver format is a 10 gigabit per second modular fiber optic interface intended for use in routers, switches and optical transport platforms. It is an early generation 10 gigabit interface related to the similar XENPAK and XPAK formats. X2 may be used with 10 Gigabit Ethernet or OC-192/STM-64 speed SDH/SONET equipment. X2 modules are smaller and consume less power than first-generation XENPAK modules, but larger and consume more energy than the newer XFP transceiver standard and SFP+ standards. As of 2016 this format is relatively uncommon and has been replaced by 10 Gbit/s SFP+ in most new equipment.
Read more →
Quality of experience

Quality of experience (QoE) is a measure of the delight or annoyance of a customer's experiences with a service (e.g., web browsing, phone call, TV broadcast). QoE focuses on the entire service experience; it is a holistic concept, similar to the field of user experience, but with its roots in telecommunication. QoE is an emerging multidisciplinary field based on social psychology, cognitive science, economics, and engineering science, focused on understanding overall human quality requirements. == Definition and concepts == In 2013, within the context of the COST Action QUALINET, QoE has been defined as:The degree of delight or annoyance of the user of an application or service. It results from the fulfillment of his or her expectations with respect to the utility and / or enjoyment of the application or service in the light of the user’s personality and current state.This definition has been adopted in 2016 by the International Telecommunication Union in Recommendation ITU-T P.10/G.100. Before, various definitions of QoE had existed in the domain, with the above-mentioned definition now finding wide acceptance in the community. QoE has historically emerged from Quality of Service (QoS), which attempts to objectively measure service parameters (such as packet loss rates or average throughput). QoS measurement is most of the time not related to a customer, but to the media or network itself. QoE however is a purely subjective measure from the user's perspective of the overall quality of the service provided, by capturing people's aesthetic and hedonic needs. QoE looks at a vendor's or purveyor's offering from the standpoint of the customer or end user, and asks, "What mix of goods, services, and support, do you think will provide you with the perception that the total product is providing you with the experience you desired and/or expected?" It then asks, "Is this what the vendor/purveyor has actually provided?" If not, "What changes need to be made to enhance your total experience?" In short, QoE provides an assessment of human expectations, feelings, perceptions, cognition and satisfaction with respect to a particular product, service or application. QoE is a blueprint of all human subjective and objective quality needs and experiences arising from the interaction of a person with technology and with business entities in a particular context. Although QoE is perceived as subjective, it is an important measure that counts for customers of a service. Being able to measure it in a controlled manner helps operators understand what may be wrong with their services and how to improve them. == QoE factors == QoE aims at taking into consideration every factor that contributes to a user's perceived quality of a system or service. This includes system, human and contextual factors. The following so-called "influence factors" have been identified and classified by Reiter et al.: Human Influence Factors Low-level processing (visual and auditory acuity, gender, age, mood, …) Higher-level processing (cognitive processes, socio-cultural and economic background, expectations, needs and goals, other personality traits…) System Influence Factors Content-related Media-related (encoding, resolution, sample rate, …) Network-related (bandwidth, delay, jitter, …) Device-related (screen resolution, display size, …) Context Influence Factors Physical context (location and space) Temporal context (time of day, frequency of use, …) Social context (inter-personal relations during experience) Economic context Task context (multitasking, interruptions, task type) Technical and information context (relationship between systems) Studies in the field of QoE have typically focused on system factors, primarily due to its origin in the QoS and network engineering domains. Through the use of dedicated test laboratories, the context is often sought to be kept constant. == QoE versus User Experience == QoE is strongly related to but different from the field of User Experience (UX), which also focuses on users' experiences with services. Historically, QoE has emerged from telecommunication research, while UX has its roots in Human–Computer Interaction. Both fields can be considered multi-disciplinary. In contrast to UX, the goal of improving QoE for users was more strongly motivated by economic needs. Wechsung and De Moor identify the following key differences between the fields: == QoE measurement == As a measure of the end-to-end performance at the service level from the user's perspective, QoE is an important metric for the design of systems and engineering processes. This is particularly relevant for video services because – due to their high traffic demands –, bad network performance may highly affect the user's experience. So, when designing systems, the expected output, i.e. the expected QoE, is often taken into account – also as a system output metric and optimization goal. To measure this level of QoE, human ratings can be used. The mean opinion score (MOS) is a widely used measure for assessing the quality of media signals. It is a limited form of QoE measurement, relating to a specific media type, in a controlled environment and without explicitly taking into account user expectations. The MOS as an indicator of experienced quality has been used for audio and speech communication, as well as for the assessment of quality of Internet video, television and other multimedia signals, and web browsing. Due to inherent limitations in measuring QoE in a single scalar value, the usefulness of the MOS is often debated. Subjective quality evaluation requires a lot of human resources, establishing it as a time-consuming process. Objective evaluation methods can provide quality results faster, but require dedicated computing resources. Since such instrumental video quality algorithms are often developed based on a limited set of subjective data, their QoE prediction accuracy may be low when compared to human ratings. QoE metrics are often measured at the end devices and can conceptually be seen as the remaining quality after the distortion introduced during the preparation of the content and the delivery through the network, until it reaches the decoder at the end device. There are several elements in the media preparation and delivery chain, and some of them may introduce distortion. This causes degradation of the content, and several elements in this chain can be considered as "QoE-relevant" for the offered services. The causes of degradation are applicable for any multimedia service, that is, not exclusive to video or speech. Typical degradations occur at the encoding system (compression degradation), transport network, access network (e.g., packet loss or packet delay), home network (e.g. WiFi performance) and end device (e.g. decoding performance). == QoE management == Several QoE-centric network management and bandwidth management solutions have been proposed, which aim to improve the QoE delivered to the end-users. When managing a network, QoE fairness may be taken into account in order to keep the users sufficiently satisfied (i.e., high QoE) in a fair manner. From a QoE perspective, network resources and multimedia services should be managed in order to guarantee specific QoE levels instead of classical QoS parameters, which are unable to reflect the actual delivered QoE. A pure QoE-centric management is challenged by the nature of the Internet itself, as the Internet protocols and architecture were not originally designed to support today's complex and high demanding multimedia services. As an example for an implementation of QoE management, network nodes can become QoE-aware by estimating the status of the multimedia service as perceived by the end-users. This information can then be used to improve the delivery of the multimedia service over the network and proactively improve the users' QoE. This can be achieved, for example, via traffic shaping. QoE management gives the service provider and network operator the capability to minimize storage and network resources by allocating only the resources that are sufficient to maintain a specific level of user satisfaction. As it may involve limiting resources for some users or services in order to increase the overall network performance and QoE, the practice of QoE management requires that net neutrality regulations are considered.
Read more →
Digital artifactual value

Digital artifactual value, a preservation term, is the intrinsic value of a digital object, rather than the informational content of the object. Though standards are lacking, born-digital objects and digital representations of physical objects may have a value attributed to them as artifacts. == Intrinsic value in analog materials == With respect to analog or non-digital materials, artifacts are determined to have singular research or archival value if they possess qualities and characteristics that make them the only acceptable form for long-term preservation. These qualities and characteristics are commonly referred to as the item's intrinsic value and form the basis upon which digital artifactual value is currently evaluated. Artifactual value based on this idea is predicated upon the artifact's originality, faithfulness, fixity, and stability. The intrinsic value of a particular object, as interpreted by archival professionals, largely determines the selection process for archives. The National Archives and Records Administration Committee on Intrinsic Value in "Intrinsic Value in Archival Material" classified an analog object as having intrinsic value if it possessed one or more of the follow qualities: Physical form that may be the subject for study if the records provide meaningful documentation or significant examples of the form. Aesthetic or artistic quality. Unique or curious physical features. Age that provides a quality of uniqueness. Value for use in exhibits. Questionable authenticity, date, author, or other characteristic that is significant and ascertainable by physical examination. General and substantial public interest because of direct association with famous or historically significant people, places, things, issues or events. Significance as documentation of the establishment or continuing legal basis of an agency or institution. Significance as documentation of the formulation of policy at the highest executive levels when the policy has significance and broad effect throughout or beyond the agency or institution. Other archival professionals such as Lynn Westney have written that the characteristics of materials exhibiting intrinsic value include age, content, usage, particularities of creation, signatures, and attached seals. Westney and others have stated that paper-based artifacts can be thought to have evidentiary value, or significant contextual markings, insofar that the original manifestation of the artifact can attest to the originality, faithfulness or authenticity, fixity, and stability of the content. For other analog materials, properly articulating intrinsic value remains essential for determining artifactual value. Similar to paper-based objects in many respects, artifactual value for images typically takes into account artistic value, age, authorial prestige, significant provenance, and institutional priorities. Analog audio preservation is based upon similar factors, including the cultural value of the item, its historical uniqueness, the estimated longevity of the medium, the current condition of the item, and the state of playback equipment, among other things. == Analog conventions in a digital realm == The standard definition of artifactual value, as it has applied to analog or non-digital materials in the twentieth century, is based upon a set of conventions which do not ordinarily apply to digital objects in toto. The Council on Library and Information Resources (CLIR) has stated that printed texts and other paper-based manuscripts, when considered as objects, are imbued with meaning distilled from a general set of understandings inherent to these conventions: The object is of a fixed and stable composition/form. Authorship and intellectual property are a recognizable concept. Duplication is possible. Fungibility of informational content (or, in other words, the ability to be replaced by another identical object). These conventions are important to consider because they help to describe the physical and even metaphysical relationship between a document's content and its physical manifestation. The underpinnings of this relationship are not identical and do not apply with the same degree of clarity to an immaterial digital realm. The idea of fixity with regard to printed materials, for example, is largely predicated on the notion that an object has been recorded on a relatively stable medium. The physical presence of a print text serves as proof of its authenticity as an object or artifact, as well as its scarcity and uniqueness in relation to other print materials. Variations in the chemical properties and storage conditions of print-based materials, as well as other cultural variables, certainly impact the fixity or stability of print materials, but there is little controversy about determining its fundamental existence or originality. However, uniqueness in the physical, paper-based sense does not translate to a digital realm in which immaterial objects are subject to theoretically infinite levels of reproduction and dissemination. Born-digital and digital surrogates may or may not look any different from each other on a server, and alterations can be made without explicit notice to the user. These alterations are normally called migration events, or actions taken on the digital object that change the original object's composition. They can enact subtle but fundamental alterations to the original document, thereby compromising its existence as an original object. Furthermore, because the tools used to generate and access digital objects have historically evolved quite rapidly, issues of playback obsolescence, incapability, data loss, and broken pathways to information have changed traditional ideas of fixity and stability. Therefore, artifactual value in a digital realm requires a modified set of generalized standards for determining artifactual originality. Michael J. Giarlo and Ronald Jantz, only two of many, have posited a list of methods for establishing digital intrinsic value by way of careful metadata generation and records maintenance. In their report, a digital original possesses three key characteristics that distinguishes it from identical copies. These include continuous verification and re-verification of the document's digital signature starting from the date of creation; retaining versions and recordings of all changes to the object in an audit trail; and having the archival master contain the creation date of the digital object. They also reported that originality in digital sources could be verified or produced by the following techniques: Digital object is given a date-time stamp that's automatically inserted into the METS-XML header upon creation. Date-time is inserted into archival metadata. Encapsulation. Digital signatures. == The role of digital surrogates == Digital surrogates are considered a utility for aiding in the preservation and increased access of certain artifacts. However, digital surrogates can have different utilities for objects depending on the nature of the original artifact and the condition the artifact is in. In 2001 the Council on Library and Information Resources (CLIR) published a report on the artifact in library collections. The CLIR states that the utility of the digital surrogate can be determined by dividing the original material (artifact) into two different categories, artifacts that are rare and those that are not. These two categories can be further divided by two categories, artifacts that are frequently used and those that are not. === Materials that are frequently used and not rare === According to the CLIR "it is not obvious that digital surrogates provide all the functionality, all the information, or all the aesthetic value of originals. Therefore, while it may be sensible to recommend that digital surrogates be used to reduce the cost and increase the availability of library holdings that circulate frequently, the decision to deaccession a physical object in library collections and replace it with a digital surrogate should be based on a careful assessment of the way in which library patrons use the original object or objects of its kind." === Materials that are infrequently used and not rare === Keeping the original is always the best solution for libraries and especially archives but in the case of libraries where an artifact is not rare or used infrequently there must be a barometer that is developed to help "balance functionality with actual use in order to help decide when digital surrogates that provide most of the functionality of originals are acceptable." === Materials that are rare and frequently used === A professional in the field of Library and Information Science (LIS) would almost certainly not argue that a digital surrogate could replace a rare object. However, in the case of a rare object that is falling into poor shape due to heavy use a digital surrogate could be extremely useful in reducing the wear a
Read more →
Calais (Reuters product)

Calais is a service created by Thomson Reuters that automatically extracts semantic information from web pages in a format that can be used on the semantic web. Calais was launched in January 2008, and is free to use. The technology is now available via the website of Refinitiv, a provider of financial market data and infrastructure founded in 2018, that is a subsidiary of London Stock Exchange Group. The Calais Web service reads unstructured text and returns Resource Description Framework formatted results identifying entities, facts and events within the text. The service appears to be based on technology acquired when Reuters purchased ClearForest in 2007. The technology has also been used to automatically tag blog articles, and organize museum collections. Calais uses natural language processing technologies delivered via a web service interface.
Read more →
Web science

Web science is an emerging interdisciplinary field concerned with the study of large-scale socio-technical systems, particularly the World Wide Web. It considers the relationship between people and technology, the ways that society and technology co-constitute one another and the impact of this co-constitution on broader society. Web Science combines research from disciplines as diverse as sociology, computer science, economics, and mathematics. The Web Science Institute, founded at the University of Southampton by director Wendy Hall and colleagues, describes Web Science as focusing "the analytical power of researchers from disciplines as diverse as mathematics, sociology, economics, psychology, law and computer science to understand and explain the Web. It is necessarily interdisciplinary – as much about social and organizational behaviour as about the underpinning technology." A central pillar of Web science development is Artificial Intelligence or "AI". The current artificial intelligence that in development at the moment is Human-Centered, with goals to further professional development courses as well as influencing public policy. Artificial intelligence developers are focused on the most impactful uses of this technology, while also hoping to expedite the growth and development of the human race. An early definition was given by American computer scientist Ben Shneiderman: "Web Science" is processing the information available on the web in similar terms to those applied to natural environment. == Areas of activity == === Emergent properties === Philip Tetlow, an IBM-based scientist influential in the emergence of web science as an independent discipline, argued for the concept of web life, which considers the Web not as a connected network of computers, as in common interpretations of the Internet, but rather as a sociotechnical machine capable of fusing together individuals and organisations into larger coordinated groups. It argues that unlike the technologies that have come before it, the Web is different in that its phenomenal growth and complexity are starting to outstrip our capability to control it directly, making it impossible for us to grasp its completeness in one go. Tetlow made use of Fritjof Capra's concept of the 'web of life' as a metaphor. == Research groups == There are numerous academic research groups engaged in Web Science research, many of which are members of WSTNet, the Web Science Trust Network of research labs. Health Web Science emerged as a sub-discipline of Web Science that studies the role of the Web's impact on human's health outcomes and how to further utilize the Web to improve health outcomes. These groups focus on the developmental possibilities, provided through Web Science, in areas such as health care and social welfare. Discussion of web science has been widely adopted as a method in which the internet can have a real world impact in the field of medicine, currently coined Medicine 2.0. The World Wide Web acts as a medium for the spread and circulation of knowledge, though these various research groups consider themselves responsible for maintaining verifiable and testable knowledge. Using their knowledge of the healthcare system as well as web science, researchers are focused on formatting and structuring their knowledge in a way that is easily accessible throughout the internet. The World Wide Web is quickly evolving meaning that the information we provide and its formatting must also. Recognizing the overlap between both aspects, the spread of knowledge and development of the internet, allows us to properly display our knowledge in a manner that evolves as quickly as the internet and everyday medical research. The accessibility of the internet and quick development of knowledge must be companied with efficient formatting to allocate successful dissemination of information, as described by these various researcher groups. == Related major conferences == Association for Computing Machinery (ACM), Hypertext Conference (HT) sponsored by SIGWEB ACM SIGCHI Conference on Human Factors in Computing Systems (CHI) International AAAI Conference on Weblogs and Social Media (ICWSM) The Web Conference (WWW) Association for Computing Machinery (ACM) Web Science Conference (WebSci)
Read more →
Electronic submission

Electronic submission refers to the submission of a document by electronic means: that is, via e-mail or a web form on the Internet, or on an electronic medium such as a compact disc, a hard disk or a USB flash drive. Traditionally, the term "manuscript" referred to anything that was explicitly "written by hand". However, in popular usage and especially in the context of computers and the internet, the term "manuscript" may even refer to documents (text or otherwise) typed out or prepared on typewriters and computers and can be extended to digital photographs and videos, and online surveys too. In other words, any manuscript prepared and submitted online can be considered to be an electronic submission. == History and early usage == There is no concrete data indicating when and by whom were electronic submissions used for the first time. However, research based universities in several countries have been encouraging the collection of course assignments and projects in the form of electronic submissions for almost a decade now. Several governments and organizations are also switching to electronic submissions for the collection of research papers, grant applications and government application forms. == Types of electronic submissions == Since modern computers can store and process information and data in virtually any format and with the Internet allowing easy transfer of this data, the number of scenarios in which submissions can be collected electronically has increased exponentially in the last few years. Some of these scenarios are described below. In most of these scenarios, submissions were collected on hard paper until the Information Technology revolution occurred. === Academic Submissions === Teachers, professors and teaching assistants often collect course assignments and projects electronically. Electronic submissions are usually collected using a web-based system which more often than not also helps in the management of submissions collected and stored on it. (Explained By Henny L, University of Lethbridge, AB, Canada) === Research Papers === In call-for-paper or academic conferences, prospective presenters are usually asked to submit a short abstract or a full paper on their presentation or research work electronically, which is reviewed before being accepted for the conference. === Proposals for Grants === Several grant-giving organizations like the NSA, W3C, NIA, NIH etc. require grant seekers to submit a proposal which if accepted result in the desired grants. A majority of these proposals are now submitted electronically on systems that also help in the managing and tracking the proposals submitted. === Articles for Publication === Magazines, newspapers and other publishing houses have begun accepting electronic submissions for articles from various sources - both internal (by journalists and writers hired by them) as well as external (by users and popular readers). The submitted articles are stored on a server hosted by the publication house or by a third-party Archived 2019-10-13 at the Wayback Machine vendor and are usually evaluated before being given a green signal. === Contests and Competition Entries === Almost every kind of contest or competition requires participants to submit an entry in a format described by the organizers of the contest. If the contest is an Internet-based one, then the entries or nominations for the contest are collected electronically using e-mail or other electronic means depending on feasibility and the choice of the organizers. === Government Applications === The governments of several countries are turning to electronic submission of applications and forms for various government procedures. Electronic submissions allow easier management of the applications and forms submitted. === Legal documents === Many legal documents may be submitted to the courts electronically. In England and Wales, the Civil Procedure Rules include a suitable "document exchange" as an acceptable "method of service". Case law in employment law cases has established that where a claim is submitted electronically, a prudent legal adviser should "check that it has been received and there must be systems in place for doing that". === Resumés and CVs === It has become commonplace for job-seekers to submit soft copies (electronic versions) of their resumés and CVs to recruiting agencies and online job portals. This is usually done over the Internet using e-mail or a pre-hosted web-based system. == Submission management systems == The art and science of collecting and managing electronic submissions is called Submission Management. Certain software vendors have begun developing submission management systems to assist in the collection, tracking and management of complex submission processes realized electronically. Most of these systems are web based and accessible from any device with a browser and an Internet connection. However, a majority of these systems are application specific and cannot be applied to all submission management scenarios. == Resistance to electronic submissions == Despite the easier management and tracking of electronic submissions compared to their paper-based counterparts, widespread adoption and use of electronic submissions and systems for managing them has been hampered by several facts, which include but are not limited to: Inconvenience while drawing figures, diagrams and equations on a computer Resistance to change and adoption of new technologies Lack of or limited access to the Internet.
Read more →