AI Detector Accuracy

AI Detector Accuracy — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

PressWise

PressWise was digital imposition software to quickly and easily impose most any variety of flat and folding layouts. It was acquired by the Aldus Prepress Group affectionately known in the print and publishing industry as the Aldus WiseGuys in August 1991 from Emulation Technologies Inc. of Cleveland, Ohio. It was further developed by the Aldus Press Group and launched as the first of many Aldus prepress products in 1993. It was subsequently owned by Adobe Systems, then Luminous Corporation (Seattle), then Imation, and finally ScenicSoft. PressWise was discontinued by ScenicSoft in 1999 ultimately. == History == In February 2009, the PressWise copyright was acquired by Aethos Technologies and a new print automation product was launched by its creator, Eric Wold of Santa Rosa, California. This new product has no relationship to the old imposition software of the same name. It's notable that Larry Letteney, former President of Creo Americas was a board member and shareholder of Aethos Technologies during its early phase. Datatech SmartSoft acquired exclusive distribution rights to the software in September 2009. In September 2010 Datatech SmartSoft completed the acquisition of the PressWise brand and product.
Read more →
ServerNet

ServerNet is a switched fabric communications link primarily used in proprietary computers made by Tandem Computers, Compaq, and HP. Its features include good scalability, clean fault containment, error detection and failover. The ServerNet architecture specification defines a connection between nodes, either processor or high performance I/O nodes such as storage devices. == History == Tandem Computers developed the original ServerNet architecture and protocols for use in its own proprietary computer systems starting in 1992, and released the first ServerNet systems in 1995. Early attempts to license the technology and interface chips to other companies failed, due in part to a disconnect between the culture of selling complete hardware / software / middleware computer systems and that needed for selling and supporting chips and licensing technology. A follow-on development effort ported the Virtual Interface Architecture to ServerNet with PCI interface boards connecting personal computers. Infiniband directly inherited many ServerNet features. As of 2017, systems still ship based on the ServerNet architecture.
Read more →
Personal network

A personal network is a set of human contacts known to an individual, with whom that individual would expect to interact at intervals to support a given set of activities. In other words, a personal network is a group of caring, dedicated people who are committed to maintain a relationship with a person in order to support a given set of activities. Having a strong personal network requires being connected to a network of resources for mutual development and growth. Personal networks can be understood by: who knows you what you know about them what they know about you what are you learning together how you work at that Personal networks are intended to be mutually beneficial, extending the concept of teamwork beyond the immediate peer group. The term is usually encountered in the workplace, though it could apply equally to other pursuits outside work. Personal networking is the practice of developing and maintaining a personal network, which is usually undertaken over an extended period. The concept is related to business networking and is often encouraged by large organizations, in the hope of improving productivity, and so a number of tools exist to support the maintenance of networks. Many of these tools are IT-based, and use Web 2.0 technologies. == History of networking and business success == In the second half of the twentieth century, U.S. advocates for workplace equity popularized the term and concept of networking as part of a larger social capital lexicon—which also includes terms such as glass ceiling, role model, mentoring, and gatekeeper—serving to identify and address the problems barring non-dominant groups from professional success. Mainstream business literature subsequently adopted the terms and concepts, promoting them as pathways to success for all career climbers. In 1970 these terms were not in the general American vocabulary; by the mid-1990s they had become part of everyday speech. Before the mid-twentieth century, what we call networking today was framed in the language of family and friendship. These close personal relationships provided a range of opportunities to preferred subsets of people, such as access to job opportunities, information, credit, and partnerships. Family networks and nepotism have proven particularly strong throughout history. However, other common bonds—from ethnicity and religion to school ties and club memberships—can connect subsets of people as well. Of course people whom insiders consider undesirable have been barred from such networks, with important consequences. Those who tap into influential networks can be nurtured toward success. Those who are shut out from networks can lose hope of success. Numerous business heroes of the past—such as Benjamin Franklin, Andrew Carnegie, Henry Ford, and John D. Rockefeller—exploited networks to great effect. The business networks that seemed natural and transparent to these white men were a closed book to women and minorities for much of American history. Drawing on work from the social sciences, these outsider groups had to identify and then harness the mechanisms behind networking's power. A prominent early example of this process was the formation of corporate caucuses by black men at Xerox starting in 1969. Groups of black salesmen met regularly to share information about Xerox's culture and strategies for navigating it most effectively. Through confrontation and collaboration with a relatively accommodating upper management, the caucuses helped open opportunities for high-performing black employees. The popular and business press began using the terms "network" and "networking" in the mid-1970s in the context of businesswomen consciously pursuing this strategy. Authors encouraged female workers to recognize and exploit the informal workplace systems that provided advancement. They urged women to identify mentors, use social contacts, and build peer and authority networks. The push for networking drew on ideas and relationships from the era's feminist movement, and dictionaries of the time explicitly linked business networking to women's efforts to succeed in the workplace. Since the closing decades of the twentieth century, networking has become a pervasive term and concept in American society. People now invoke networking in relation to everything from business to child rearing to science. While ambitious careerists seek networks as an indispensable talisman, companies purposefully encourage networking among their employees to boost performance and gain competitive advantage. At the same time, Americans are forgetting the workplace activism that first illuminated the power of networking. Unfortunately, this loss of historical context can fuel a backlash against outsider groups who still seek to synthesize networks so they can access the same opportunities enjoyed by insiders. == Characteristics of networks == Broadly speaking, all networks have the following characteristics: Purpose – A network can be established for learning, mission, business, idea, and family or personal reasons. Structure – A network is a group of interlinked entities that form a cluster. Most social structures tend to be characterized by dense clusters of strong connections. Style – The place, space, pace and style of interaction of the networks give an understanding of the style of the networks. Namkee Park, Seungyoon Lee and Jang Hyun Kim examined the relations between personal network characteristics and Facebook use. According to their study, personal networks are investigated through several structural characteristics, which can be categorized into three major dimensions according to the level of analysis: Dyadic tie attributes which include the characteristics of ego-alter ties such as duration, multiplexity, and proximity. Ego-alter tie attributes represent various dimensions of relationships between the focal person and their close contacts. First, tie duration refers to the length of time since the tie was originally initiated, which indicates the duration of relationships. Second, multiplexity includes a focal individual's degree of involvement in various types of interactions with network members. The third dimension is the physical proximity between ego and alter. Theories of proximity suggest that physical proximity between people affects their interaction and subsequently, their formation of network ties. The characteristics of alter-alter ties including personal network density. When moving to ties at the alter-alter level, ego-network density, which refers to the extent to which one's alters are connected with each other, is an important dimension of personal networks. Dense personal network structure indicates close interpersonal contacts among alters, and consequently, is considered to promote the sharing of resources. On the other hand, loose connections, or structural holes in ego-networks, have been found to facilitate the flow of information and to provide advantages in searching and obtaining resources (e.g., getting a job). The composition of alter attributes centered on the heterogeneity of alters in one's personal network. The heterogeneity of alters in one's personal network is associated with access to diverse resources and information It is expected, thus, that the heterogeneity attributes may enhance the focal actor's social activities. Each of these characteristics represents unique aspects of individuals' network relationships. == Types of personal networks == Personal networks can be used for two main reasons: social and professional. In 2012, LinkedIn along with TNS conducted a survey of 6,000 social network users to understand the difference between personal social networks and personal professional networks. The "Mindset Divide" of users of these networks was compared as follows: Emotions: Personal social networks: Nostalgia, fun, distraction. Personal professional networks: Achievement, success, aspiration. Use: Personal social networks: Users are in a casual mindset often just passing time. They use social networks to socialize, stay in touch, be entertained and kill time. Personal professional networks: In this purposeful mindset, users invest time to improve themselves and their future. These networks are used to maintain professional identity, make useful contacts, search for opportunities and stay in touch. Content: Personal professional networks: These provide information about career, brand updates and current affairs. Professional development: Personal development networks: These provide access to those who can provide information, knowledge, advice, support, expertise, guidance, and concrete resources to learn and work effectively—thus those who support the continuing professional development. == Personal network management == Personal network management (PNM) is a crucial aspect of personal information management and can be understood as the practice of managing the links and connections for social and profession
Read more →
Computer network engineering

Computer network engineering is a technology discipline within engineering that deals with the design, implementation, and management of computer networks. These systems contain both physical components, such as routers, switches, cables, and some logical elements, such as protocols and network services. Computer network engineers attempt to ensure that the data is transmitted efficiently, securely, and reliably over both local area networks (LANs) and wide area networks (WANs), as well as across the Internet. Computer networks often play a large role in modern industries ranging from telecommunications to cloud computing, enabling processes such as email and file sharing, as well as complex real-time services like video conferencing and online gaming. == Background == The evolution of network engineering is marked by significant milestones that have greatly impacted communication methods. These milestones particularly highlight the progress made in developing communication protocols that are vital to contemporary networking. This discipline originated in the 1960s with projects like ARPANET, which initiated important advancements in reliable data transmission. The advent of protocols such as TCP/IP revolutionized networking by enabling interoperability among various systems, which, in turn, fueled the rapid growth of the Internet. Key developments include the standardization of protocols and the shift towards increasingly complex layered architectures. These advancements have profoundly changed the way devices interact across global networks. == Network infrastructure design == The foundation of computer network engineering lies in the design of the network infrastructure. This involves planning both the physical layout of the network and its logical topology to ensure optimal data flow, reliability, and scalability. === Physical infrastructure === The physical infrastructure consists of the hardware used to transmit data, which is represented by the first layer of the OSI model. ==== Cabling ==== Copper cables such as ethernet over twisted pair are commonly used for short-distance connections, especially in local area networks (LANs), while fiber optic cables are favored for long-distance communication due to their high-speed transmission capabilities and lower susceptibility to interference. Fiber optics play a significant role in the backbone of large-scale networks, such as those used in data centers and internet service provider (ISP) infrastructures. ==== Wireless networks ==== In addition to wired connections, wireless networks have become a common component of physical infrastructure. These networks facilitate communication between devices without the need for physical cables, providing flexibility and mobility. Wireless technologies use a range of transmission methods, including radio frequency (RF) waves, infrared signals, and laser-based communication, allowing devices to connect to the network. Wi-Fi based on IEEE 802.11 standards is the most widely used wireless technology in local area networks and relies on RF waves to transmit data between devices and access points. Wireless networks operate across various frequency bands, including 2.4 GHz and 5 GHz, each offering unique ranges and data rates; the 2.4 GHz band provides broader coverage, while the 5 GHz band supports faster data rates with reduced interference, ideal for densely populated environments. Beyond Wi-Fi, other wireless transmission methods, such as infrared and laser-based communication, are used in specific contexts, like short-range, line-of-sight links or secure point-to-point communication. In mobile networks, cellular technologies like 3G, 4G, and 5G enable wide-area wireless connectivity. 3G introduced faster data rates for mobile browsing, while 4G significantly improved speed and capacity, supporting advanced applications like video streaming. The latest evolution, 5G, operates across a range of frequencies, including millimeter-wave bands, and provides high data rates, low latency, and support for more device connectivity, useful for applications like the Internet of Things (IoT) and autonomous systems. Together, these wireless technologies allow networks to meet a variety of connectivity needs across local and wide areas. ==== Network devices ==== Routers and switches help direct data traffic and assist in maintaining network security; network engineers configure these devices to optimize traffic flow and prevent network congestion. In wireless networks, wireless access points (WAP) allow devices to connect to the network. To expand coverage, multiple access points can be placed to create a wireless infrastructure. Beyond Wi-Fi, cellular network components like base stations and repeaters support connectivity in wide-area networks, while network controllers and firewalls manage traffic and enforce security policies. Together, these devices enable a secure, flexible, and scalable network architecture suitable for both local and wide-area coverage. === Logical topology === Beyond the physical infrastructure, a network must be organized logically, which defines how data is routed between devices. Various topologies, such as star, mesh, and hierarchical designs, are employed depending on the network’s requirements. In a star topology, for example, all devices are connected to a central hub that directs traffic. This configuration is relatively easy to manage and troubleshoot but can create a single point of failure. In contrast, a mesh topology, where each device is interconnected with several others, offers high redundancy and reliability but requires a more complex design and larger hardware investment. Large networks, especially those in enterprises, often employ a hierarchical model, dividing the network into core, distribution, and access layers to enhance scalability and performance. == Network protocols and communication standards == Communication protocols dictate how data in a network is transmitted, routed, and delivered. Depending on the goals of the specific network, protocols are selected to ensure that the network functions efficiently and securely. The Transmission Control Protocol/Internet Protocol (TCP/IP) suite is fundamental to modern computer networks, including the Internet. It defines how data is divided into packets, addressed, routed, and reassembled. The Internet Protocol (IP) is critical for routing packets between different networks. In addition to traditional protocols, advanced protocols such as Multiprotocol Label Switching (MPLS) and Segment Routing (SR) enhance traffic management and routing efficiency. For intra-domain routing, protocols like Open Shortest Path First (OSPF) and Enhanced Interior Gateway Routing Protocol (EIGRP) provide dynamic routing capabilities. On the local area network (LAN) level, protocols like Virtual Extensible LAN (VXLAN) and Network Virtualization using Generic Routing Encapsulation (NVGRE) facilitate the creation of virtual networks. Furthermore, Internet Protocol Security (IPsec) and Transport Layer Security (TLS) secure communication channels, ensuring data integrity and confidentiality. For real-time applications, protocols such as Real-time Transport Protocol (RTP) and WebRTC provide low-latency communication, making them suitable for video conferencing and streaming services. Additionally, protocols like QUIC enhance web performance and security by establishing secure connections with reduced latency. == Network security == As networks have become essential for business operations and personal communication, the demand for robust security measures has increased. Network security is a critical component of computer network engineering, concentrating on the protection of networks against unauthorized access, data breaches, and various cyber threats. Engineers are responsible for designing and implementing security measures that ensure the integrity and confidentiality of data transmitted across networks. Firewalls serve as barriers between trusted internal networks and external environments, such as the Internet. Network engineers configure firewalls, including next-generation firewalls (NGFW), which incorporate advanced features such as deep packet inspection and application awareness, thereby enabling more refined control over network traffic and protection against sophisticated attacks. In addition to firewalls, engineers use encryption protocols, including Internet Protocol Security (IPsec) and Transport Layer Security (TLS), to secure data in transit. These protocols provide a means of safeguarding sensitive information from interception and tampering. For secure remote access, Virtual Private Networks (VPNs) are deployed, using technologies to create encrypted tunnels for data transmission over public networks. These VPNs are often used for maintaining security when remote users access corporate networks but are also used ion other settings. To enhance threat detection and r
Read more →
Data item

A data item describes an atomic state of a particular object concerning a specific property at a certain time point. A collection of data items for the same object at the same time forms an object instance (or table row). Any type of complex information can be broken down to elementary data items (atomic state). Data items are identified by object (o), property (p) and time (t), while the value (v) is a function of o, p and t: v = F(o,p,t). Values typically are represented by symbols like numbers, texts, images, sounds or videos. Values are not necessarily atomic. A value's complexity depends on the complexity of the property and time component. When looking at databases or XML files, the object is usually identified by an object name or other type of object identifier, which is part of the "data". Properties are defined as columns (table row), properties (object instance) or tags (XML). Often, time is not explicitly expressed and is an attribute applying to the complete data set. Other data collections provide time on the instance level (time series), column level, or even attribute/property level.
Read more →
Data deduplication

In computing, data deduplication is a technique for eliminating duplicate copies of repeating data. Successful implementation of the technique can improve storage utilization, which may in turn lower capital expenditure by reducing the overall amount of storage media required to meet storage capacity needs. It can also be applied to network data transfers to reduce the number of bytes that must be sent. The deduplication process requires comparison of data 'chunks' (also known as 'byte patterns') which are unique, contiguous blocks of data. These chunks are identified and stored during a process of analysis, and compared to other chunks within existing data. Whenever a match occurs, the redundant chunk is replaced with a small reference that points to the stored chunk. Given that the same byte pattern may occur dozens, hundreds, or even thousands of times (the match frequency is dependent on the chunk size), the amount of data that must be stored or transferred can be greatly reduced. A related technique is single-instance (data) storage, which replaces multiple copies of content at the whole-file level with a single shared copy. While possible to combine this with other forms of data compression and deduplication, it is distinct from newer approaches to data deduplication (which can operate at the segment or sub-block level). Deduplication is different from data compression algorithms, such as LZ77 and LZ78. Whereas compression algorithms identify redundant data inside individual files and encodes this redundant data more efficiently, the intent of deduplication is to inspect large volumes of data and identify large sections – such as entire files or large sections of files – that are identical, and replace them with a shared copy. == Functioning principle == For example, a typical email system might contain 100 instances of the same 1 MB (megabyte) file attachment. Each time the email platform is backed up, all 100 instances of the attachment are saved, requiring 100 MB storage space. With data deduplication, only one instance of the attachment is actually stored; the subsequent instances are referenced back to the saved copy for deduplication ratio of roughly 100 to 1. Deduplication is often paired with data compression for additional storage saving: Deduplication is first used to eliminate large chunks of repetitive data, and compression is then used to efficiently encode each of the stored chunks. In computer code, deduplication is done by, for example, storing information in variables so that they don't have to be written out individually but can be changed all at once at a central referenced location. Examples are CSS classes and named references in MediaWiki. == Benefits == Storage-based data deduplication reduces the amount of storage needed for a given set of files. It is most effective in applications where many copies of very similar or even identical data are stored on a single disk. In the case of data backups, which routinely are performed to protect against data loss, most data in a given backup remain unchanged from the previous backup. Common backup systems try to exploit this by omitting (or hard linking) files that haven't changed or storing differences between files. Neither approach captures all redundancies, however. Hard-linking does not help with large files that have only changed in small ways, such as an email database; differences only find redundancies in adjacent versions of a single file (consider a section that was deleted and later added in again, or a logo image included in many documents). In-line network data deduplication is used to reduce the number of bytes that must be transferred between endpoints, which can reduce the amount of bandwidth required. See WAN optimization for more information. Virtual servers and virtual desktops benefit from deduplication because it allows nominally separate system files for each virtual machine to be coalesced into a single storage space. At the same time, if a given virtual machine customizes a file, deduplication will not change the files on the other virtual machines—something that alternatives like hard links or shared disks do not offer. Backing up or making duplicate copies of virtual environments is similarly improved. == Classification == === Post-process versus in-line deduplication === Deduplication may occur "in-line", as data is flowing, or "post-process" after it has been written. With post-process deduplication, new data is first stored on the storage device and then a process at a later time will analyze the data looking for duplication. The benefit is that there is no need to wait for the hash calculations and lookup to be completed before storing the data, thereby ensuring that store performance is not degraded. Implementations offering policy-based operation can give users the ability to defer optimization on "active" files, or to process files based on type and location. One potential drawback is that duplicate data may be unnecessarily stored for a short time, which can be problematic if the system is nearing full capacity. Alternatively, deduplication hash calculations can be done in-line: synchronized as data enters the target device. If the storage system identifies a block which it has already stored, only a reference to the existing block is stored, rather than the whole new block. The advantage of in-line deduplication over post-process deduplication is that it requires less storage and network traffic, since duplicate data is never stored or transferred. On the negative side, hash calculations may be computationally expensive, thereby reducing the storage throughput. However, certain vendors with in-line deduplication have demonstrated equipment which performs in-line deduplication at high rates. Post-process and in-line deduplication methods are often heavily debated. === Data formats === The SNIA Dictionary identifies two methods: Content-agnostic data deduplication – a data deduplication method that does not require awareness of specific application data formats. Content-aware data deduplication – a data deduplication method that leverages knowledge of specific application data formats. === Source versus target deduplication === Another way to classify data deduplication methods is according to where they occur. Deduplication occurring close to where data is created, is referred to as "source deduplication". When it occurs near where the data is stored, it is called "target deduplication". Source deduplication ensures that data on the data source is deduplicated. This generally takes place directly within a file system. The file system will periodically scan new files creating hashes and compare them to hashes of existing files. When files with same hashes are found then the file copy is removed and the new file points to the old file. Unlike hard links however, duplicated files are considered to be separate entities and if one of the duplicated files is later modified, then using a system called copy-on-write a copy of that changed file or block is created. The deduplication process is transparent to the users and backup applications. Backing up a deduplicated file system will often cause duplication to occur resulting in the backups being bigger than the source data. Source deduplication can be declared explicitly for copying operations, as no calculation is needed to know that the copied data is in need of deduplication. This leads to a new form of link on file systems, called a reference-counted link, or reflink, in some systems (e.g. Linux), or a cloned file on macOS, where one or more inodes (file information entries) are made to share some or all of their data. It is named analogously to hard links, which work at the inode level, and symbolic links, which work at the filename level.The individual entries have a copy-on-write behavior that is non-aliasing, i.e. changing one copy afterwards will not affect other copies. Microsoft's ReFS also supports this operation. Target deduplication is the process of removing duplicates when the data was not generated at that location. Example of this would be a server connected to a SAN/NAS, The SAN/NAS would be a target for the server (target deduplication). The server is not aware of any deduplication, the server is also the point of data generation. A second example would be backup. Generally this will be a backup store such as a data repository or a virtual tape library. === Deduplication methods === One of the most common forms of data deduplication implementations works by comparing chunks of data to detect duplicates. For that to happen, each chunk of data is assigned an identification, calculated by the software, typically using cryptographic hash functions. In many implementations, the assumption is made that if the identification is identical, the data is identical, even though this cannot be true in all cases due to the pigeonhole principle; other implementations do not as
Read more →
Consumer relationship system

Consumer relationship systems (CRS) are specialized customer relationship management (CRM) software applications that are used to handle a company's dealings with its customers. Current consumer relationship systems integrate the software with telephone and call recording systems as well as with corporate systems for input and reporting. Customers can provide input from the company's website directly into the CRS. These systems are popular because they can deliver the 'voice of the consumer' that contributes to product quality improvement and that ultimately increases corporate profits. Consumer relationship systems that provide automated support as well as advanced systems may have artificial intelligence (AI) interfaces that can extract and analyse data collected, or handle basic questions and complaints. == History == The first CRS was developed in the 1980s. In 1981 Michael Wilke and Robert Thornton founded Wilke/Thornton, Inc in Columbus, Ohio, to develop new CRS software.
Read more →
Brain Imaging Data Structure

The Brain Imaging Data Structure (BIDS) is a standard for organizing, annotating, and describing data collected during neuroimaging experiments. It is based on a formalized file and directory structure and metadata files (based on JSON and TSV) with controlled vocabulary. This standard has been adopted by a multitude of labs around the world as well as databases such as OpenNeuro, SchizConnect, Developing Human Connectome Project, and FCP-INDI, and is seeing uptake in an increasing number of studies. While originally specified for MRI data, BIDS has been extended to several other imaging modalities such as MEG, EEG, and intracranial EEG (see also BIDS Extension Proposals). == History == The project is a community-driven effort. BIDS, originally OBIDS (Open Brain Imaging Data Structure), was initiated during an INCF sponsored data sharing working group meeting (January 2015) at Stanford University. It was subsequently spearheaded and maintained by Chris Gorgolewski. Since October 2019, the project is headed by a Steering Group and maintained by a separate team of maintainers, the Maintainers Group, according to a governance document that was approved of by the BIDS community in a vote. BIDS has advanced under the direction and effort of contributors, the community of researchers that appreciate the value of standardizing neuroimaging data to facilitate sharing and analysis. == BIDS Extension Proposals == BIDS can be extended in a backwards compatible way and is evolving over time. This is accomplished through BIDS Extension Proposals (BEPs), which are community-driven processes following agreed-upon guidelines. A full list of finalized BEPs and BEPs in progress can be found on the BIDS website
Read more →
Networked Help Desk

Networked Help Desk is an open standard initiative to provide a common API for sharing customer support tickets between separate instances of issue tracking, bug tracking, customer relationship management (CRM) and project management systems to improve customer service and reduce vendor lock-in. The initiative was created by Zendesk in June 2011 in collaboration with eight other founding member organizations including Atlassian, New Relic, OTRS, Pivotal Tracker, ServiceNow and SugarCRM. The first integration, between Zendesk and Atlassian's issue tracking product, Jira, was announced at the 2011 Atlassian Summit. By August 2011, 34 member companies had joined the initiative. A year after launching, over 50 organizations had joined. Within Zendesk instances this feature is branded as ticket sharing. == Basis == Support tools are generally built around a common paradigm that begins with a customer making a request or an incident report, these create a ticket. Each ticket has a progress status and is updated with annotations and attachments. These annotations and attachments may be visible to the customer (public), or only visible to analysts (private). Customers are notified of progress made on their ticket until it is complete. If the people necessary to complete a ticket are using separate support tools, additional overhead is introduced in maintaining the relevant information in the ticket in each tool while notifying the customer of progress made by each group in completing their ticket. For example, if a customer support issue is caused by a software bug and reported to a help desk using one system, and then the fix is documented by the developers in another, and analyzed in a customer relationship management tool, keeping the records in each system up-to-date and notifying the customer manually using a swivel chair approach is unnecessarily time-consuming and error-prone. If information is not transferred correctly, a customer may have to re-explain their problem each time their ticket is transferred. For systems with the Networked Help Desk API implemented, it is possible for several different applications related to a customer's support experience to synchronize data in one uniquely identified shared ticket. While many applications in these domains have implemented APIs that allow data to be imported, exported and modified, Network Help Desk provide a common standard for customer support information to automatically synchronize between several systems. Once implemented, two systems can quickly share tickets with just a configuration change as they both understand the same interface. Communication between two instances on a specific ticket occurs in three steps, an invitation agreement, sharing of ticket data and continued synchronization of tickets. The standard allows for "full delegation" (analysts in both systems each make public and private comments and synchronize status) as well as "partial delegation" where the instance receiving the ticket can only make private comments and status changes are not synchronized. Tickets may be shared with multiple instances. == Implementation list ==
Read more →
Social media surgery

A social media surgery is a gathering at which volunteer "surgeons" with expertise in using web tools, chiefly social media, offer free advice in using such tools, to representatives ("patients") of non-profit organisations, charities, community groups and activists, with "no boring speeches or jargon". The idea was conceived by Pete Ashton, with Nick Booth of Podnosh Ltd, who ran the first such surgery in Birmingham, England, on 15 October 2008. In July 2009, a spin-off surgery (dubbed the "Social media mob") started in Mosman, Australia, and in January 2010, the first spin-off surgery in Africa was held. On 16 February 2012, it was announced that the Social Media Surgery movement had won "the Prime Minister’s Big Society Award". Prime Minister David Cameron said: This is an excellent initiative - such a simple idea and yet so effective. The popularity of these surgeries and the fact that they have inspired so many others across the country to follow in their footsteps, is testament to its brilliance. Congratulations to Nick and all the volunteers who have shared their time and expertise to help so many local groups make the most of the internet to support their community. A great example of the Big Society in action. The scheme also won the 2013 Adult Learners' Week "BBC Learning Through Technology Award".
Read more →
Data recovery

In computing, data recovery is a process of retrieving deleted, inaccessible, lost, corrupted, damaged, or overwritten data from secondary storage, removable media or files, when the data stored in them cannot be accessed in a usual way. The data is most often salvaged from storage media such as internal or external hard disk drives (HDDs), solid-state drives (SSDs), USB flash drives, magnetic tapes, CDs, DVDs, RAID subsystems, and other electronic devices. Recovery may be required due to physical damage to the storage devices or logical damage to the file system that prevents it from being mounted by the host operating system (OS). Logical failures occur when the hard drive devices are functional but the user or automated-OS cannot retrieve or access data stored on them. Logical failures can occur due to corruption of the engineering chip, lost partitions, firmware failure, or failures during formatting/re-installation. Data recovery can be a very simple or technical challenge. This is why there are specific software companies specialized in this field that help to get back data on your system. == About == The most common data recovery scenarios involve an operating system failure, malfunction of a storage device, logical failure of storage devices, accidental damage or deletion, etc. (typically, on a single-drive, single-partition, single-OS system), in which case the ultimate goal is simply to copy all important files from the damaged media to another new drive. This can be accomplished using a Live CD, or DVD by booting directly from a ROM or a USB drive instead of the corrupted drive in question. Many Live CDs or DVDs provide a means to mount the system drive and backup drives or removable media, and to move the files from the system drive to the backup media with a file manager or optical disc authoring software. Such cases can often be mitigated by disk partitioning and consistently storing valuable data files (or copies of them) on a different partition from the replaceable OS system files. Another scenario involves a drive-level failure, such as a compromised file system or drive partition, or a hard disk drive failure. In any of these cases, the data is not easily read from the media devices. Depending on the situation, solutions involve repairing the logical file system, partition table, or master boot record, or updating the firmware or drive recovery techniques ranging from software-based recovery of corrupted data, to hardware- and software-based recovery of damaged service areas (also known as the hard disk drive's "firmware"), to hardware replacement on a physically damaged drive which allows for the extraction of data to a new drive. If a drive recovery is necessary, the drive itself has typically failed permanently, and the focus is rather on a one-time recovery, salvaging whatever data can be read. In a third scenario, files have been accidentally "deleted" from a storage medium by the users. Typically, the contents of deleted files are not removed immediately from the physical drive; instead, references to them in the directory structure are removed, and thereafter space the deleted data occupy is made available for later data overwriting. In the mind of end users, deleted files cannot be discoverable through a standard file manager, but the deleted data still technically exists on the physical drive. In the meantime, the original file contents remain, often several disconnected fragments, and may be recoverable if not overwritten by other data files. The term "data recovery" is also used in the context of forensic applications or espionage, where data which have been encrypted, hidden, or deleted, rather than damaged, are recovered. Sometimes data present in the computer gets encrypted or hidden due to reasons like virus attacks which can only be recovered by some computer forensic experts. == Physical damage == A wide variety of failures can cause physical damage to storage media, which may result from human errors and natural disasters. CD-ROMs can have their metallic substrate or dye layer scratched off; hard disks can suffer from a multitude of mechanical failures, such as head crashes, PCB failure, and failed motors; tapes can simply break. Physical damage to a hard drive, even in cases where a head crash has occurred, does not necessarily mean permanent data loss. However, in extreme cases, such as prolonged exposure to moisture and corrosion —like the lost Bitcoin hard drive of James Howells, buried in the Newport landfill for over a decade — recovery is usually impossible. In rare cases, forensic techniques such as magnetic force microscopy (MFM) have been explored to detect residual magnetic traces when data holds exceptional value. Other techniques employed by many professional data recovery companies can typically salvage most, if not all, of the data that had been lost when the failure occurred. Of course, there are exceptions to this, such as cases where severe damage to the hard drive platters may have occurred. However, if the hard drive can be repaired and a full image or clone created, then the logical file structure can be rebuilt in most instances. Most physical damage cannot be repaired by end users. For example, opening a hard disk drive in a normal environment can allow airborne dust to settle on the platter and become caught between the platter and the read/write head. During normal operation, read/write heads float 3 to 6 nanometers above the platter surface, and the average dust particles found in a normal environment are typically around 30,000 nanometers in diameter. When these dust particles get caught between the read/write heads and the platter, they can cause new head crashes that further damage the platter and thus compromise the recovery process. Furthermore, end users generally do not have the hardware or technical expertise required to make these repairs. Consequently, data recovery companies are often employed to salvage important data with the more reputable ones using class 100 dust- and static-free cleanrooms. === Recovery techniques === Recovering data from physically damaged hardware can involve multiple techniques. Some damage can be repaired by replacing parts in the hard disk. This alone may make the disk usable, but there may still be logical damage. A specialized disk-imaging procedure is used to recover every readable bit from the surface. Once this image is acquired and saved on a reliable medium, the image can be safely analyzed for logical damage and will possibly allow much of the original file system to be reconstructed. ==== Hardware repair ==== A common misconception is that a damaged printed circuit board (PCB) may be simply replaced during recovery procedures by an identical PCB from a healthy drive. While this may work in rare circumstances on hard disk drives manufactured before 2003, it will not work on newer drives. Electronics boards of modern drives usually contain drive-specific adaptation data (generally a map of bad sectors and tuning parameters) and other information required to properly access data on the drive. Replacement boards often need this information to effectively recover all of the data. The replacement board may need to be reprogrammed. Some manufacturers (Seagate, for example) store this information on a serial EEPROM chip, which can be removed and transferred to the replacement board. Each hard disk drive has what is called a system area or service area; this portion of the drive, which is not directly accessible to the end user, usually contains drive's firmware and adaptive data that helps the drive operate within normal parameters. One function of the system area is to log defective sectors within the drive; essentially telling the drive where it can and cannot write data. The sector lists are also stored on various chips attached to the PCB, and they are unique to each hard disk drive. If the data on the PCB do not match what is stored on the platter, then the drive will not calibrate properly. In most cases the drive heads will click because they are unable to find the data matching what is stored on the PCB. == Logical damage == The term "logical damage" refers to situations in which the error is not a problem in the hardware and requires software-level solutions. === Corrupt partitions and file systems, media errors === In some cases, data on a hard disk drive can be unreadable due to damage to the partition table or file system, or to (intermittent) media errors. In the majority of these cases, at least a portion of the original data can be recovered by repairing the damaged partition table or file system using specialized data recovery software such as TestDisk; software like ddrescue can image media despite intermittent errors, and image raw data when there is partition table or file system damage. This type of data recovery can be performed by people without expertise in drive hardware as it requires no special physica
Read more →
List of cryptography journals

List of cryptography journals includes notable peer-reviewed academic journals that focus on cryptography, cryptanalysis, information security, and related areas in computer science and mathematics. == Notable journals == Cryptologia Designs, Codes and Cryptography IEEE Transactions on Information Theory International Journal of Information Security Journal of Cryptology Journal of Computer Security ACM Transactions on Privacy and Security Information Processing Letters Information and Computation
Read more →
Uncertain data

In computer science, uncertain data is data that contains noise that makes it deviate from the correct, intended or original values. In the age of big data, uncertainty or data veracity is one of the defining characteristics of data. Data is constantly growing in volume, variety, velocity and uncertainty (1/veracity). Uncertain data is found in abundance today on the web, in sensor networks, within enterprises both in their structured and unstructured sources. For example, there may be uncertainty regarding the address of a customer in an enterprise dataset, or the temperature readings captured by a sensor due to aging of the sensor. In 2012 IBM called out managing uncertain data at scale in its global technology outlook report that presents a comprehensive analysis looking three to ten years into the future seeking to identify significant, disruptive technologies that will change the world. In order to make confident business decisions based on real-world data, analyses must necessarily account for many different kinds of uncertainty present in very large amounts of data. Analyses based on uncertain data will have an effect on the quality of subsequent decisions, so the degree and types of inaccuracies in this uncertain data cannot be ignored. Uncertain data is found in the area of sensor networks; text where noisy text is found in abundance on social media, web and within enterprises where the structured and unstructured data may be old, outdated, or plain incorrect; in modeling where the mathematical model may only be an approximation of the actual process. When representing such data in a database, an appropriate uncertain database model needs to be selected. == Example data model for uncertain data == One way to represent uncertain data is through probability distributions. Let us take the example of a relational database. There are three main ways to do represent uncertainty as probability distributions in such a database model. In attribute uncertainty, each uncertain attribute in a tuple is subject to its own independent probability distribution. For example, if readings are taken of temperature and wind speed, each would be described by its own probability distribution, as knowing the reading for one measurement would not provide any information about the other. In correlated uncertainty, multiple attributes may be described by a joint probability distribution. For example, if readings are taken of the position of an object, and the x- and y-coordinates stored, the probability of different values may depend on the distance from the recorded coordinates. As distance depends on both coordinates, it may be appropriate to use a joint distribution for these coordinates, as they are not independent. In tuple uncertainty, all the attributes of a tuple are subject to a joint probability distribution. This covers the case of correlated uncertainty, but also includes the case where there is a probability of a tuple not belonging in the relevant relation, which is indicated by all the probabilities not summing to one. For example, assume we have the following tuple from a probabilistic database: Then, the tuple has 10% chance of not existing in the database.
Read more →
Information security

Information security is the practice of protecting information by mitigating information risks. It is part of information risk management. It typically involves preventing or reducing the probability of unauthorized or inappropriate access to data or the unlawful use, disclosure, disruption, deletion, corruption, modification, inspection, recording, or devaluation of information. It also involves actions intended to reduce the adverse impacts of such incidents. Protected information may take any form, e.g., electronic or physical, tangible (e.g., paperwork), or intangible (e.g., knowledge). Information security's primary focus is the balanced protection of data confidentiality, integrity, and availability (known as the CIA triad, unrelated to the US government organization) while maintaining a focus on efficient policy implementation, all without hampering organization productivity. This is largely achieved through a structured risk management process. To standardize this discipline, academics and professionals collaborate to offer guidance, policies, and industry standards on passwords, antivirus software, firewalls, encryption software, legal liability, security awareness and training, and so forth. This standardization may be further driven by a wide variety of laws and regulations that affect how data is accessed, processed, stored, transferred, and destroyed. While paper-based business operations are still prevalent, requiring their own set of information security practices, enterprise digital initiatives are increasingly being emphasized, with information assurance now typically being dealt with by information technology (IT) security specialists. These specialists apply information security to technology (most often some form of computer system). IT security specialists are almost always found in any major enterprise/establishment due to the nature and value of the data within larger businesses. They are responsible for keeping all of the technology within the company secure from malicious attacks that often attempt to acquire critical private information or gain control of the internal systems. There are many specialist roles in Information Security including securing networks and allied infrastructure, securing applications and databases, security testing, information systems auditing, business continuity planning, electronic record discovery, and digital forensics. == Standards == Information security standards are guidelines generally outlined in published materials that aim to protect a user's or an organization's cyber environment from threats. This environment includes the users themselves, hardware such as devices and networks, software such as applications or services, and any information in storage or transit. These standards comprise security concepts, technologies, and guidelines to deal with an adverse event. They may also include assessment criteria and certification for organizations implementing a minimum level of security. These standards are developed by various international and national bodies to prevent or mitigate cyber-attacks, ensure consistency among developers, and establish a minimum standard in industries susceptible to an attack. The ISO/IEC 27000 family, published by the International Organization for Standardization (ISO) and the International Electrotechnical Commission (IEC), provides information about the guidelines and requirements for an Information Security Management System (ISMS). The Common Criteria (ISO/IEC 15408) provides guidelines on evaluating and certifying the security of a system. The IEC 62443 establishes security standards for automation and control systems. Similarly, the ISO/SAE 21434, ETSI EN 303 645, and EN 18031 provide standards for road vehicles, the Internet of Things, and radio-based systems respectively. The NIST Cybersecurity Framework (NIST CSF) is a set of guidelines developed by the U.S. National Institute of Standards and Technology to help organizations with risk management. NIST also publishes various Federal Information Processing Standards (FIPS) and Special Publications. The United Kingdom has introduced Cyber Essentials, which is a certification scheme to protect organizations against common security threats. The Australian Cyber Security Centre publishes the Essential Eight mitigation strategies. The Payment Card Industry Data Security Standard (PCI DSS) regulates handling of cardholder data in order to reduce credit card fraud. UL has published standards related to specific industries such as UL 2900-2-3 for security and life safety signaling systems and UL-2900-2-1 for healthcare and wellness systems. == Threats == Information security threats come in many different forms. Some of the most common threats today are software attacks, theft of intellectual property, theft of identity, theft of equipment or information, sabotage, and information extortion. Viruses, worms, phishing attacks, and Trojan horses are a few common examples of software attacks. The theft of intellectual property has also been an extensive issue for many businesses. Identity theft is the attempt to act as someone else usually to obtain that person's personal information or to take advantage of their access to vital information through social engineering. Sabotage usually consists of the destruction of an organization's website in an attempt to cause loss of confidence on the part of its customers. Information extortion consists of theft of a company's property or information as an attempt to receive a payment in exchange for returning the information or property back to its owner, as with ransomware. One of the most functional precautions against these attacks is to conduct periodical user awareness. Governments, military, corporations, financial institutions, hospitals, non-profit organizations, and private businesses amass a great deal of confidential information about their employees, customers, products, research, and financial status. Should confidential information about a business's customers or finances or new product line fall into the hands of a competitor or hacker, a business and its customers could suffer widespread, irreparable financial loss, as well as damage to the company's reputation. From a business perspective, information security must be balanced against cost; the Gordon-Loeb Model provides a mathematical economic approach for addressing this concern. For the individual, information security has a significant effect on privacy, which is viewed very differently in various cultures. == History == Since the early days of communication, diplomats and military commanders understood that it was necessary to provide some mechanism to protect the confidentiality of correspondence and to have some means of detecting tampering. Julius Caesar is credited with the invention of the Caesar cipher c. 50 B.C., which was created in order to prevent his secret messages from being read should a message fall into the wrong hands. However, for the most part protection was achieved through the application of procedural handling controls. Sensitive information was marked up to indicate that it should be protected and transported by trusted persons, guarded and stored in a secure environment or strong box. As postal services expanded, governments created official organizations to intercept, decipher, read, and reseal letters (e.g., the U.K.'s Secret Office, founded in 1653). In the mid-nineteenth century more complex classification systems were developed to allow governments to manage their information according to the degree of sensitivity. For example, the British Government codified this, to some extent, with the publication of the Official Secrets Act in 1889. Section 1 of the law concerned espionage and unlawful disclosures of information, while Section 2 dealt with breaches of official trust. A public interest defense was soon added to defend disclosures in the interest of the state. A similar law was passed in India in 1889, The Indian Official Secrets Act, which was associated with the British colonial era and used to crack down on newspapers that opposed the Raj's policies. A newer version was passed in 1923 that extended to all matters of confidential or secret information for governance. By the time of the First World War, multi-tier classification systems were used to communicate information to and from various fronts, which encouraged greater use of code making and breaking sections in diplomatic and military headquarters. Encoding became more sophisticated between the wars as machines were employed to scramble and unscramble information. The establishment of computer security inaugurated the history of information security. The need for such appeared during World War II. The volume of information shared by the Allied countries during the Second World War necessitated formal alignment of classification systems and procedural controls. An arcane range of markings evol
Read more →
Cover-coding

Cover-coding is a technique for obscuring the data that is transmitted over an insecure link, to reduce the risks of snooping. An example of cover-coding would be for the sender to perform a bitwise XOR (exclusive OR) of the original data with a password or random number which is known to both sender and receiver. The resulting cover-coded data is then transmitted from sender to the receiver, who uncovers the original data by performing a further bitwise XOR (exclusive OR) operation on the received data using the same password or random number. ISO 18000-6C (EPC Class 1 Generation 2) RFID tags protect some operations with a cover code. The reader requests a random number from the tag, and the tag responds with a new random number. The reader then encrypts future communications with this number, using bitwise XOR, to the data it sends. Cover coding is secure if the tag signal can't be intercepted and the random number is not re-used. Compared to the loud transmissions from the reader, tag backscatter is much weaker and difficult -- but not impossible -- to intercept.
Read more →