AI Detector Accuracy

AI Detector Accuracy — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

• 

  Deep tomographic reconstruction

  Deep Tomographic Reconstruction is a set of methods for using deep learning methods to perform tomographic reconstruction of medical and industrial images. It uses artificial intelligence and machine learning, especially deep artificial neural networks or deep learning, to overcome challenges such as measurement noise, data sparsity, image artifacts, and computational inefficiency. This approach has been applied across various imaging modalities, including CT, MRI, PET, SPECT, ultrasound, and optical imaging == Historical background == Traditional tomographic reconstruction relies on analytic methods such as filtered back-projection, or iterative methods which incrementally compute inverse transformations from measurement data (e.g., Radon or Fourier transform data). However, these approaches are not sufficient for certain imaging techniques such as low-dose CT and fast MRI, or scenarios involving metal artifacts and patient motion. == Use in imaging modalities == === Computed tomography (CT) === In CT, deep learning models can be particularly effective in reducing radiation exposure while maintaining image quality. Deep neural networks can also be able to reconstruct images of fair quality from sparsely sampled data without sacrificing diagnostic performance. Deep learning-based generative AI models can reduce CT metal artifacts. === Magnetic resonance imaging (MRI) === In magnetic resonance imaging (MRI), deep learning can lead to reduced MRI motion artifacts, and increased acquisition speed, referred to as fast MRI. Despite suffering from disadvantages such as lower signal-to-noise ratio (SNR), deep learning can enhance image quality in low field MRI, making these systems clinically viable. === Positron emission tomography (PET) and single-photon emission CT (SPECT) === For PET imaging, deep learning models can provide substantial improvements in low-dose imaging and motion artifact correction. Also, deep learning can help SPECT for generation of attenuation background. A notable technique for PET denoising involves integrating MR data through multimodal networks, which use anatomical information from MRI to enhance PET image quality. === Ultrasound imaging === Deep learning can enhance ultrasound imaging by reducing speckle noise and motion blur. For ultrasound beamforming, deep neural networks can allow superior image quality with limited data at high speed. === Optical imaging and microscopy === Diffuse optical tomography, optical coherence tomography and microscopy can be improved by deep neural networks beyond traditional methods. Furthermore, deep learning can also enhance Photoacoustic imaging (see Deep learning in photoacoustic imaging), addressing challenges like high noise, low contrast, and limited resolution. Deep learning has also been applied to label-free live-cell imaging, where convolutional neural networks predict fluorescence labels from transmitted light images, a technique known as in silico labeling. This method can enable high-throughput, non-invasive cell analysis and phenotyping without the need for traditional fluorescent dyes.

  Read more →
• 

  Web Dynpro

  Web Dynpro (WD) is a web application technology developed by SAP SE that focuses on the development of server-side business applications. For modern releases (for instance as of NetWeaver 750, software layer SAP_UI) the user interface is rendered according to the HTML5 web standard. Since Netweaver 754 (software layer SAP_UI, ABAP Platform 1909) a touch enabled user interface is available. The newly released versions usually follow the SAP Fiori design principles. One of its main design features is that the user interface is defined in an entirely declarative manner. Web Dynpro applications can be developed using either the Java (Web Dynpro for Java, WDJ or WD4J) or ABAP (Web Dynpro ABAP, WDA or WD4A) development infrastructure. == Overview == The earliest version of Web Dynpro appeared in 2003 and was based on Java. This variant was released approximately 18 months before the ABAP variant. As of 2010, the Java variant of Web Dynpro was put into maintenance mode. WD follows a design architecture based on an interpretation of the MVC design pattern and uses a model driven development approach ("minimize coding, maximize design"). The Web Dynpro Framework is a server-side runtime environment into which many dedicated "hook methods" are available. The developer then places their own custom coding within these hook methods in order to implement the desired business functionality. These hook methods belong to one of the broad categories of either "life-cycle" and "round-trip"; that is, those methods that are concerned with the life-cycle of a software component (i.e. processing that takes place at start up and shut down etc.), and those methods that are concerned with processing the fixed sequence of events that take place during a client-initiated round trip to the server. Web Dynpro is aimed at the development of business applications that follow standardized UI principles, applications that connect to backend systems and which are scalable. Key Capabilities Declarative way of development: Web Dynpro offers a graphical and declarative means of UI development. UI controls, building blocks, views and windows are modeled, and the business logic can be coded separately. Separation of user interface and business logic: One advantage of Web Dynpro over SAP GUI is the separation between business logic and user interface, and the structured development process with less implementation effort. Support of stateful application: The state of the application is kept in the back-end. This leads to a reduced data transfer from ABAP server to browser and vice versa. Regarding Web Dynpro ABAP there is only one programming language (ABAP) and only one system necessary. Therefore, development can be easier and cost efficient.

  Read more →
• 

  List of performance analysis tools

  This is a list of performance analysis tools for use in software development. == General purpose, language independent == The following tools work based on log files that can be generated from various systems. time (Unix) - can be used to determine the run time of a program, separately counting user time vs. system time, and CPU time vs. clock time. timem (Unix) - can be used to determine the wall-clock time, CPU time, and CPU utilization similar to time (Unix) but supports numerous extensions. Supports reporting peak resident set size, major and minor page faults, priority and voluntary context switches via getrusage. Supports sampling procfs on supporting systems to report metrics such as page-based resident set size, virtual memory size, read-bytes, and write-bytes, etc. Supports collecting hardware counters when built with PAPI support. == Multiple languages == The following tools work for multiple languages or binaries. == C and C++ == Arm MAP, a performance profiler supporting Linux platforms. AppDynamics, an application performance management service for C/C++ applications via SDK. AQtime Pro, a performance profiler and memory allocation debugger that can be integrated into Microsoft Visual Studio, and Embarcadero RAD Studio, or can run as a stand-alone application. IBM Rational Purify was a memory debugger allowing performance analysis. Instruments (bundled with Xcode) is used to profile an executable's memory allocations, time usage, filesystem activity, GPU activity etc. Intel Parallel Studio contains Intel VTune Amplifier, which tunes both serial and parallel programs. It also includes Intel Advisor and Intel Inspector. Intel Advisor optimizes vectorization (use of SIMD instructions) and prototypes threading implementations. Intel Inspector detects and debugs races, deadlocks and memory errors. Parasoft Insure++ provides a graphical tool that displays and animates memory allocations in real time to expose memory blowout, fragmentation, overuse, bottlenecks and leaks. Visual Studio Team System Profiler, commercial profiler by Microsoft. == Java == inspectIT is an open-source application performance management (APM) service for monitoring and analyzing software applications, available under the Apache License, Version 2.0 (ALv2). JConsole is the profiler which comes with the Java Development Kit JProfiler JRockit Mission Control, a profiler with low overhead. Netbeans Profiler, a profiler integrated into the NetBeans IDE (internally uses jvisualvm profiler) Plumbr, Java application performance monitoring with automated root cause detection. Links memory leaks, GC inefficiency, slow database and external web service calls, locked threads, and other performance problems to the line in source code that causes them. OverOps, Continuous reliability for the modern software supply chain, automatically detect and deliver root cause automation for all errors. VisualVM is a visual tool integrating several commandline JDK tools and lightweight profiling capabilities. It is bundled with the Java Development Kit since version 6, update 7. == JavaScript == The Firefox web browser's developer tools contain a Performance tool, which gives insight into JavaScript performance of a website. Microsoft Visual Studio AJAX Profiling Extensions is a free profiling tool for JavaScript by Microsoft Research. == .NET == CLR Profiler is a free memory profiler provided by Microsoft for CLR applications. GlowCode is a performance and memory profiler for .NET applications using C# and other .NET languages. It identifies time-intensive functions and detects memory leaks and errors in native, managed and mixed Windows x64 and x86 applications. Visual Studio == PHP == BlackFire.io Dbg Xdebug is a PHP extension which provides debugging and profiling capabilities.

  Read more →
• 

  Symbaloo

  Symbaloo is a cloud-based site that allows users to organize and categorize web links in the form of buttons. Symbaloo works from a web browser and can be configured as a homepage, allowing users to create a personalized virtual desktop accessible from any device with an Internet connection. Symbaloo users, which must be previously registered, have a page with a grid of buttons that can be configured to link to a specific page. The site allows users to assign different colors to the buttons for easy visual classification. Symbaloo allows a single user to create different pages or screens with buttons. These screens called webmix are useful to separate topics and links can be shared with other users, making them public and sending the link via email. As of 2015 Symbaloo has 6 million users worldwide and mainly used as an online education resource. Symbaloo's slogan is "Start Simple".

  Read more →
• 

  Deep image compositing

  Deep image compositing is a way of compositing and rendering digital images that emerged in the mid-2010s. In addition to the usual color and opacity channels a notion of spatial depth is created. This allows multiple samples in the depth of the image to make up the final resulting color. This technique produces high quality results and removes artifacts around edges that could not be dealt with otherwise. == Deep data == Deep data is encoded by advanced 3D renderers into an image that samples information about the path each rendered pixel takes along the z axis extending outward from the virtual camera through space, including the color and opacity of every non-opaque surface or volume it passes through along the way, as well as neighboring samples. It might be considered somewhat analogous to the way ray tracing generates simulated photon paths through such mediums; however, ray tracing and other traditional rendering techniques generally produce images that contain only three or four channels of color and opacity values per pixel, flattened into a two dimensional frame. Depth maps, on the other hand, contain z axis information encoded in a grayscale image. Each level of gray represents a different slice of the z space. The "thickness" of each slice is determined at time of render, allowing for more or less depth fidelity depending on how deep the scene is. Depth maps have been a boon to compositors for blending 3D renders with live action and practical elements. To be useful, the map must have high enough bit depth to encode separation between close-to-camera objects and objects near infinity. Most 3D software packages are now capable of generating 16-bit and 32-bit depth maps, providing up to 2 billion depth levels. Depth maps do not however include transparency information about non-opaque surfaces or volumes and as such, objects beyond and viewed through these semi- or fully-transparent objects will have no depth information of their own and may not get composited or blurred correctly. Even the popular addition of cryptomattes to many post-production and VFX studios' pipelines, while providing separate color-coded ID shapes for individual elements in a rendered scene to further bridge the gap between CGI and compositing, don't allow for the nearly automated and fully non-linear workflows that deep data does. This is because deep images encapsulate enough 3D information that normally time-intensive tasks such as rotoscoping with numerous holdout mattes for complex interactions between moving characters and semi-transparent environmental volumes like smoke or water, are essentially trivial. Instead of going through that process, multiple mattes could easily be generated from a single set of deep images with no need to re-render every matte element and background for each case. In addition to that efficiency and flexibility, deep data images inherently provide much higher visual quality in common areas that have been difficult with traditional renders, such as the motion-blurred edges of characters with semi-transparent elements like hair. One downside to the use of deep images is their substantial file size, since they encode a relatively enormous amount of data per frame compared to even multichannel formats such as OpenEXR. === Function-based (integrated) === The data is stored as a function of depth. This results in a function curve that can be used to look up the data at any arbitrary depth. Manipulating the data is harder. === Sample-based (deintegrated) === Each sample is considered as an independent piece and can so be manipulated easily. To make sure the data is representing the right detail, an additional expand value needs to be introduced. == Generating deep data == 3D renderers produce the necessary data as a part of the rendering pipeline. Samples are gathered in depth and then combined. The deep data can be written out before this happens and so is nothing new to the process. Generating deep data from camera data needs a proper depth map. This is used in a couple of cases but still not accurate enough for detailed representation. For basic holdout task this can be sufficient though. == Compositing deep data images == Deep images can be composited like regular images. The depth component makes it easier to determine the layering order. Traditionally this had to be input by the user. Deep images have that information for themselves and need no user input. Edge artifacts are reduced as transparent pixels have more data to work with. == History == Deep Images have been around in 3D rendering packages for quite a while now. The use of them for holdouts was first done at several VFX houses in shaders. Holdout mattes can be generated at render time. Using them in a more interactive manner was started recently by several companies, SideFX integrated it in their Houdini software and facilities like Industrial Light & Magic, DreamWorks Animation, Weta, AnimalLogic and DRD studios have implemented interactive solutions. In 2014 the Academy of Motion Picture Arts and Sciences honored the technology with its annual SciTech awards. Dr. Peter Hillman for the long-term development and continued advancement of innovative, robust and complete toolsets for deep compositing and to Colin Doncaster, Johannes Saam, Areito Echevarria, Janne Kontkanen and Chris Cooper for the development, prototyping and promotion of technologies and workflows for deep compositing. == Resources == Pixar Paper Deep Image Paper Video tutorial of Deep Imaging as used on 2012 film Rise of the Planet of the Apes, Nuke compositing software Deep Compositing Course Deep Image File Format at Google Code Academy Award for the Technology Theory of Deep Pixels OpenEXR Deep Pixels

  Read more →
• 

  EyeOS

  eyeOS was a web desktop for cloud computing, whose main purpose is to enable collaboration and communication among users. It is mainly written in PHP, XML, and JavaScript. It is a private-cloud application platform with a web-based desktop interface. eyeOS delivers a whole desktop from the cloud with file management, personal management information tools, and collaborative tools, with the integration of the client's applications. == History == The first publicly available eyeOS version was released on August 1, 2005, as eyeOS 0.6.0 in Olesa de Montserrat, Barcelona (Spain). A worldwide community of developers soon took part in the project and helped improve it by translating, testing, and developing it. After two years of development, the eyeOS Team published eyeOS 1.0 on June 4, 2007. Compared with previous versions, eyeOS 1.0 introduced a complete reorganization of the code and some new web technologies, like eyeSoft, a portage-based web software installation system. Moreover, eyeOS also included the eyeOS Toolkit, a set of libraries allowing easy and fast development of new web applications. With the release of eyeOS 1.1 on July 2, 2007, eyeOS changed its license and migrated from GNU GPL Version 2 to Version 3. Version 1.2 was released just a month after the 1.1 version and integrated full compatibility with Microsoft Word files. eyeOS 1.5 Gala was released on January 15, 2008. This version was the first to support both Microsoft Office and OpenOffice.org file formats for documents, presentations, and spreadsheets. With this version, eyeOS also gained the ability to import and export documents in both formats using server-side scripting. eyeOS 1.6 was released on April 25, 2008, and included many improvements such as synchronization with local computers, drag and drop, a mobile version, and more. eyeOS 1.8 Lars was released on January 7, 2009, and featured a completely rewritten file manager and a new sound API to develop media-rich applications. Later, on April 1, 2009, 1.8.5 was released with a new default theme and some rewritten apps, such as the Word Processor and the Address Book. On July 13, 2009, 1.8.6 was released with an interface for the iPhone and a new version of eyeMail with support for POP3 and IMAP. eyeOS 1.9 was released on December 29, 2009. It was followed up with the 1.9.0.1 release with minor fixes on February 18, 2010. These releases were the last of the "classic desktop" interfaces. A major re-work was completed in March 2010, now called eyeOS 2.x. However, a small group of eyeOS developers still maintain the code within the eyeOS forum, where support is provided, but the eyeOS group itself has stopped active 1.x development. It is now available as the On-eye project on GitHub. Active development was halted on 1.x as of February 3, 2010. eyeOS 2.0 release took place on March 3, 2010. This was a total restructure of the operating system. The 2.x stable is the new series of eyeOS, which is in active development and will replace 1.x as stable in a few months. It includes live collaboration and more social capabilities than eyeOS 1.x. eyeOS then released 2.2.0.0 on July 28, 2010. On December 14, 2010, a working group inside the eyeOS open-source development community began the structure development and further upgrade of eyeOS 1.9.x. The group's main goal is to continue the work eyeOS has stopped on 1.9.x. eyeOS released 2.5 on May 17, 2011. This was the last release under an open source license. It is available on SourceForge for download under another project called eyeOS 2.5 Open Source Version. On April 1, 2014, Telefónica announced their acquisition of eyeOS. eyeOS would maintain its headquarters in the Catalonia, Spain, where their staff would continue to work but now as part of Telefónica. After its integration into Telefónica, eyeOS would continue to function as an independent subsidiary under CEO Michel Kisfaludi. == Structure and API == For developers, EyeOS provides the eyeOS Toolkit, a set of libraries and functions to develop applications for eyeOS. Using the integrated Portage-based eyeSoft system, one can create their own repository for eyeOS and distribute applications through it. Each core part of the desktop is its own application, using JavaScript to send server commands as the user interacts. As actions are performed using AJAX (such as launching an application), it sends event information to the server. The server then sends back tasks for the client to do in XML format, such as drawing a widget. On the server, eyeOS uses XML files to store information. This makes it simple for a user to set up on the server, as it requires zero configuration other than the account information for the first user, making it simple to deploy. To avoid bottlenecks that flat files present, each user's information and settings are stored in different files, preventing resource starvation from occurring, though this in turn may create issues in high volume user environments due to host operating system open file descriptor limits. == Professional edition == A Professional Edition of eyeOS was launched on September 15, 2011, as an operating system for businesses. It uses a new version number and was released under version 1.0 instead of continuing with the next version number in the open source project. The Professional Edition retains the web desktop interface used by the open source version while targeting enterprise users. A host of new features designed for enterprises, like file sharing and synchronization (called eyeSync), Active Directory/LDAP connectivity, system-wide administration controls, and a local file execution tool called eyeRun were introduced. A new suite of Web Apps (a mail client, calendar, instant messaging, and collaboration tools) was also introduced, specific to the enterprise edition for the web desktop. With eyeOS Professional Edition 1.1, a to-do task manager tool, Citrix XenApp integration, and a Facebook like 'wall' for collaboration were introduced. == Awards == 2007 – Received the Softpedia's Pick award. 2007 – Finalist at SourceForge's 2007 Community Choice Awards at the "Best Project" category. The winner for that category was 7-Zip. 2007 – Won the Yahoo! Spain Web Revelation award in the Technology category. 2008 – Finalist for the Webware 100 awards by CNET, under the "Browsing" category. 2008 – Finalist at the SourceForge's 2008 Community Choice Awards at the "Most Likely to Change the World" category. The winner for that category was Linux. 2009 – Selected Project of the Month (August 2009) by SourceForge. 2009 – BMW Innovation Award. 2010 – Winner of Accelera (Ernst & Young). 2010 – Asturias & Girona Spanish Prince award “IMPULSA”. 2011 – Winner of MIT's TR35 award as Innovator of the Year in Spain. == Community == eyeOS community is formed with the eyeOS forums, which reached 10,000 members on April 4, 2008; the eyeOS wiki; and the eyeOS Application Communities, available at the eyeOS-Apps website, hosted and provided by openDesktop.org as well as Softpedia.

  Read more →
• 

  Cloud-native computing

  Cloud native computing is an approach in software development that utilizes cloud computing to "build and run scalable applications in modern, dynamic environments such as public, private, and hybrid clouds". These technologies, such as containers, microservices, serverless functions, cloud native processors and immutable infrastructure, deployed via declarative code are common elements of this architectural style. Cloud native technologies focus on minimizing users' operational burden. Cloud native techniques "enable loosely coupled systems that are resilient, manageable, and observable. Combined with robust automation, they allow engineers to make high-impact changes frequently and predictably with minimal toil." This independence contributes to the overall resilience of the system, as issues in one area do not necessarily cripple the entire application. Additionally, such systems are easier to manage, and monitor, given their modular nature, which simplifies tracking performance and identifying issues. Frequently, cloud-native applications are built as a set of microservices that run in Open Container Initiative compliant containers, such as Containerd, and may be orchestrated in Kubernetes and managed and deployed using DevOps and Git CI workflows (although there is a large amount of competing open source that supports cloud-native development). The advantage of using containers is the ability to package all software needed to execute into one executable package. The container runs in a virtualized environment, which isolates the contained application from its environment.

  Read more →
• 

  ShowScoop

  ShowScoop is a website and mobile app platform on which users can rate and review artists, concerts, and music festivals that they have seen/attended. The reviews and ratings are designed to be informative of how well such performances are live. This helps concert-goers decide which live music events they want to attend. == History == ShowScoop was founded in August 2012 by Micah Smurthwaite and is based out of San Diego, CA. In February 2013, ShowScoop launched its mobile app at the SF Music Tech Summit. The application is currently available on the iPhone, with plans to expand into the Android market in the future. == Services == ShowScoop uses crowdsourcing to provide accurate ratings of live concert experiences. In addition to viewing ratings, users are encouraged to rate and review concerts they have attended. The ShowScoop database includes nearly one million artists and over 2.5 million live music events. ShowScoop users can rate artists on four aspects of the performance: stage presence, crowd interaction, sound quality, and visual effects. The rating system uses an ascending scale from one to five in each of the aspects, with five being the highest score. In addition to the quantitative ratings, ShowScoop users are also free to write qualitative reviews in a provided comment section. This allows users to explain their ratings and add further insight or opinion. ShowScoop incorporates several facets of social media into its services. Users can create a user profile to share limited personal information and store their ratings and reviews. Users are also given the option of sharing their evaluations with their social networks on Facebook and Twitter. Users can "like" reviews, follow artists, and follow other ShowScoop users. The mobile app allows users to take photos, apply filters, and share the final image in conjunction with reviews and through Instagram. == Road Crew == ShowScoop's "Road Crew" is a group made up of top contributors within the ShowScoop community. The Road Crew assists in curating artist pages, assuring information quality and accuracy. In return, members of the Road Crew are given incentives, including free tickets to concerts and personal invitations to exclusive shows. Applicants to the Road Crew are judged on the number and quality of their reviews, the photos and videos they have posted, and their general engagement with the ShowScoop community in following and liking users and reviews.

  Read more →
• 

  Discrete skeleton evolution

  Discrete Skeleton Evolution (DSE) describes an iterative approach to reducing a morphological or topological skeleton. It is a form of pruning in that it removes noisy or redundant branches (spurs) generated by the skeletonization process, while preserving information-rich "trunk" segments. The value assigned to individual branches varies from algorithm to algorithm, with the general goal being to convey the features of interest of the original contour with a few carefully chosen lines. Usually, clarity for human vision (aka. the ability to "read" some features of the original shape from the skeleton) is valued as well. DSE algorithms are distinguished by complex, recursive decision-making processes with high computational requirements. Pruning methods such as by structuring element (SE) convolution and the Hough transform are general purpose algorithms which quickly pass through an image and eliminate all branches shorter than a given threshold. DSE methods are most applicable when detail retention and contour reconstruction are valued. == Methodology == === Pre-processing === Input images will typical contain more data than is necessary to generate an initial skeleton, and thus must be reduced in some way. Reducing the resolution, converting to grayscale, and then binary by masking or thresholding are common first steps. Noise removal may occur before and/or after converting an image to binary. Morphological operations such as closing, opening, and smoothing of the binary image may also be part of pre-processing. Ideally, the binarized contour should be as noise-free as possible before the skeleton is generated. === Skeletonization === DSE techniques may be applied to an existing skeleton or incorporated as part of the skeleton growing algorithm. Suitable skeletons may be obtained using a variety of methods: Thinning algorithms, such as the Grassfire transform Voronoi diagram Medial Axis Transform or Symmetry Axis Transform Distance Mapping === Significance Measures === DSE and related methods remove entire spurious branches while leaving the main trunk intact. The intended result is typically optimized for visual clarity and retention of information, such that the original contour can be reconstructed from the fully pruned skeleton. The value of various properties must be weighted by the application, and improving the efficiency is an ongoing topic of research in computer vision and image processing. Some significance measures include: Discrete Bisector Function Contour length Bending Potential Ratio Discrete Curve Evolution === Iteration === Each branch is evaluated during a pass through the skeletonized image according to the specific algorithm being used. Low value branches are removed and the process is repeated until a desired threshold of simplicity is reached. === Reconstruction === If all points on the output skeleton are the center points of maximal disks of the image and the radius information is retained, a contour image can be reconstructed == Applications == === Handwriting and text parsing === Variability in hand-written text is an ongoing challenge, simplification makes it somewhat easier for computer vision algorithms to make judgements about intended characters. === Soft body classification (animals) === The maximal disks centered on the skeleton imply roughly spherical masses, the features of the extracted skeleton are relatively unchanged even as the soft body deforms or self-occludes. Skeleton information is one facet of determining whether two animals are the "same" some way, though it must usually be paired with another technique to effectively identify a target. === Medical uses === Investigation of organs, tissue damage and deformation caused by disease.

  Read more →
• 

  Distributed file system for cloud

  A distributed file system for cloud is a file system that allows many clients to have access to data and supports operations (create, delete, modify, read, write) on that data. Each data file may be partitioned into several parts called chunks. Each chunk may be stored on different remote machines, facilitating the parallel execution of applications. Typically, data is stored in files in a hierarchical tree, where the nodes represent directories. There are several ways to share files in a distributed architecture: each solution must be suitable for a certain type of application, depending on how complex the application is. Meanwhile, the security of the system must be ensured. Confidentiality, availability and integrity are the main keys for a secure system. Users can share computing resources through the Internet thanks to cloud computing which is typically characterized by scalable and elastic resources – such as physical servers, applications and any services that are virtualized and allocated dynamically. Synchronization is required to make sure that all devices are up-to-date. Distributed file systems enable many big, medium, and small enterprises to store and access their remote data as they do local data, facilitating the use of variable resources. == Overview == === History === Today, there are many implementations of distributed file systems. The first file servers were developed by researchers in the 1970s. Sun Microsystem's Network File System became available in the 1980s. Before that, people who wanted to share files used the sneakernet method, physically transporting files on storage media from place to place. Once computer networks started to proliferate, it became obvious that the existing file systems had many limitations and were unsuitable for multi-user environments. Users initially used FTP to share files. FTP first ran on the PDP-10 at the end of 1973. Even with FTP, files needed to be copied from the source computer onto a server and then from the server onto the destination computer. Users were required to know the physical addresses of all computers involved with the file sharing. === Supporting techniques === Modern data centers must support large, heterogenous environments, consisting of large numbers of computers of varying capacities. Cloud computing coordinates the operation of all such systems, with techniques such as data center networking (DCN), the MapReduce framework, which supports data-intensive computing applications in parallel and distributed systems, and virtualization techniques that provide dynamic resource allocation, allowing multiple operating systems to coexist on the same physical server. === Applications === Cloud computing provides large-scale computing thanks to its ability to provide the needed CPU and storage resources to the user with complete transparency. This makes cloud computing particularly suited to support different types of applications that require large-scale distributed processing. This data-intensive computing needs a high performance file system that can share data between virtual machines (VM). Cloud computing dynamically allocates the needed resources, releasing them once a task is finished, requiring users to pay only for needed services, often via a service-level agreement. Cloud computing and cluster computing paradigms are becoming increasingly important to industrial data processing and scientific applications such as astronomy and physics, which frequently require the availability of large numbers of computers to carry out experiments. == Architectures == Most distributed file systems are built on the client-server architecture, but other, decentralized, solutions exist as well. === Client-server architecture === Network File System (NFS) uses a client-server architecture, which allows sharing of files between a number of machines on a network as if they were located locally, providing a standardized view. The NFS protocol allows heterogeneous clients' processes, probably running on different machines and under different operating systems, to access files on a distant server, ignoring the actual location of files. Relying on a single server results in the NFS protocol suffering from potentially low availability and poor scalability. Using multiple servers does not solve the availability problem since each server is working independently. The model of NFS is a remote file service. This model is also called the remote access model, which is in contrast with the upload/download model: Remote access model: Provides transparency, the client has access to a file. He sends requests to the remote file (while the file remains on the server). Upload/download model: The client can access the file only locally. It means that the client has to download the file, make modifications, and upload it again, to be used by others' clients. The file system used by NFS is almost the same as the one used by Unix systems. Files are hierarchically organized into a naming graph in which directories and files are represented by nodes. === Cluster-based architectures === A cluster-based architecture ameliorates some of the issues in client-server architectures, improving the execution of applications in parallel. The technique used here is file-striping: a file is split into multiple chunks, which are "striped" across several storage servers. The goal is to allow access to different parts of a file in parallel. If the application does not benefit from this technique, then it would be more convenient to store different files on different servers. However, when it comes to organizing a distributed file system for large data centers, such as Amazon and Google, that offer services to web clients allowing multiple operations (reading, updating, deleting,...) to a large number of files distributed among a large number of computers, then cluster-based solutions become more beneficial. Note that having a large number of computers may mean more hardware failures. Two of the most widely used distributed file systems (DFS) of this type are the Google File System (GFS) and the Hadoop Distributed File System (HDFS). The file systems of both are implemented by user level processes running on top of a standard operating system (Linux in the case of GFS). ==== Design principles ==== ===== Goals ===== Google File System (GFS) and Hadoop Distributed File System (HDFS) are specifically built for handling batch processing on very large data sets. For that, the following hypotheses must be taken into account: High availability: the cluster can contain thousands of file servers and some of them can be down at any time A server belongs to a rack, a room, a data center, a country, and a continent, in order to precisely identify its geographical location The size of a file can vary from many gigabytes to many terabytes. The file system should be able to support a massive number of files The need to support append operations and allow file contents to be visible even while a file is being written Communication is reliable among working machines: TCP/IP is used with a remote procedure call RPC communication abstraction. TCP allows the client to know almost immediately when there is a problem and a need to make a new connection. ===== Load balancing ===== Load balancing is essential for efficient operation in distributed environments. It means distributing work among different servers, fairly, in order to get more work done in the same amount of time and to serve clients faster. In a system containing N chunkservers in a cloud (N being 1000, 10000, or more), where a certain number of files are stored, each file is split into several parts or chunks of fixed size (for example, 64 megabytes), the load of each chunkserver being proportional to the number of chunks hosted by the server. In a load-balanced cloud, resources can be efficiently used while maximizing the performance of MapReduce-based applications. ===== Load rebalancing ===== In a cloud computing environment, failure is the norm, and chunkservers may be upgraded, replaced, and added to the system. Files can also be dynamically created, deleted, and appended. That leads to load imbalance in a distributed file system, meaning that the file chunks are not distributed equitably between the servers. Distributed file systems in clouds such as GFS and HDFS rely on central or master servers or nodes (Master for GFS and NameNode for HDFS) to manage the metadata and the load balancing. The master rebalances replicas periodically: data must be moved from one DataNode/chunkserver to another if free space on the first server falls below a certain threshold. However, this centralized approach can become a bottleneck for those master servers, if they become unable to manage a large number of file accesses, as it increases their already heavy loads. The load rebalance problem is NP-hard. In order to get a large number of chunkservers to work in collaboration, and to

  Read more →
• 

  DaVinci (software)

  DaVinci was a development tool produced by Incross, which aimed at creating HTML5 mobile applications and media content. It included a jQuery framework and a JavaScript library that enabled developers and designers to craft web applications designed for mobile devices with a user experience similar to native applications. Business applications, games, rich media content, such as HTML5 multi-media magazines, advertisements, and animation, may be produced with the tool. DaVinci was based on standard web technology – including HTML5, CSS3, and JavaScript. == Features == DaVinci comprised DaVinci Studio and DaVinci Animator, which handled application programming and UI design. The tool had a WYSIWYG authoring environment. Open-source libraries, such as KnockOut, JsRender/JsViews, Impress.js, and turn.js, were included in the tool. Other open-source frameworks could also be integrated. The Model View Controller (MVC) and Data Binding in JavaScript could be handled through DaVinci's Data-Set Editor. In this mode, view components and model data could be visually bound, which allowed users to create web applications with server-integrated UI components without coding. Additionally, DaVinci included an N-Screen editor, which automatically adjusted designs and functionalities to fit the screen sizes of various devices, including smartphones, tablet PCs, and TVs. == DaVinci and jQuery == In collaboration with the jQuery Foundation, DaVinci played a significant role in hosting the first jQuery conference in an Asian district, which took place on November 12, 2012, in Seoul, South Korea. The conference showcased how DaVinci could be utilized in application development demonstrations.

  Read more →
• 

  Apache ORC

  Apache ORC (Optimized Row Columnar) is a free and open-source column-oriented data storage format. It is similar to the other columnar-storage file formats available in the Hadoop ecosystem such as RCFile and Parquet. It is used by most of the data processing frameworks Apache Spark, Apache Hive, Apache Flink, and Apache Hadoop. In February 2013, the Optimized Row Columnar (ORC) file format was announced by Hortonworks in collaboration with Facebook. A calendar month later, the Apache Parquet format was announced, developed by Cloudera and Twitter. Apache ORC format is widely supported including Amazon Web Services' Glue,Google Cloud Platform's BigQuery, and Pandas (software). == History ==

  Read more →
• 

  Inverse depth parametrization

  In computer vision, the inverse depth parametrization is a parametrization used in methods for 3D reconstruction from multiple images such as simultaneous localization and mapping (SLAM). Given a point p {\displaystyle \mathbf {p} } in 3D space observed by a monocular pinhole camera from multiple views, the inverse depth parametrization of the point's position is a 6D vector that encodes the optical centre of the camera c 0 {\displaystyle \mathbf {c} _{0}} when in first observed the point, and the position of the point along the ray passing through p {\displaystyle \mathbf {p} } and c 0 {\displaystyle \mathbf {c} _{0}} . Inverse depth parametrization generally improves numerical stability and allows to represent points with zero parallax. Moreover, the error associated to the observation of the point's position can be modelled with a Gaussian distribution when expressed in inverse depth. This is an important property required to apply methods, such as Kalman filters, that assume normality of the measurement error distribution. The major drawback is the larger memory consumption, since the dimensionality of the point's representation is doubled. == Definition == Given 3D point p = ( x , y , z ) {\displaystyle \mathbf {p} =(x,y,z)} with world coordinates in a reference frame ( e 1 , e 2 , e 3 ) {\displaystyle (e_{1},e_{2},e_{3})} , observed from different views, the inverse depth parametrization y {\displaystyle \mathbf {y} } of p {\displaystyle \mathbf {p} } is given by: y = ( x 0 , y 0 , z 0 , θ , ϕ , ρ ) {\displaystyle \mathbf {y} =(x_{0},y_{0},z_{0},\theta ,\phi ,\rho )} where the first five components encode the camera pose in the first observation of the point, being c 0 = ( x 0 , y 0 , z 0 ) {\displaystyle \mathbf {c_{0}} =(x_{0},y_{0},z_{0})} the optical centre, ϕ {\displaystyle \phi } the azimuth, θ {\displaystyle \theta } the elevation angle, and ρ = 1 ‖ p − c 0 ‖ {\displaystyle \rho ={\frac {1}{\left\Vert \mathbf {p} -\mathbf {c} _{0}\right\Vert }}} the inverse depth of p {\displaystyle p} at the first observation.

  Read more →
• 

  InstallCore

  InstallCore (stylized as installCore) was an installation and content distribution platform created by ironSource, considered potentially unwanted programs (PUP) by a number of anti-malware vendors. It included a software development kit (SDK) for Windows and Mac OS X. The program allowed those using it for distribution to include monetization by advertisements or charging for installation, and made its installations invisible to the user and its anti-virus software. The platform and its programs have been rated potentially unwanted programs (PUP) or potentially unwanted applications (PUA) by anti-malware product vendors since 2014, and by Windows Defender Antivirus since 2015. The platform was primarily designed for efficient web-based deployment of various types of application software. As of August 2012, InstallCore was managing 100 million installations every month, offering services for paid, unpaid, and free software by using the SDK version. == History == The InstallCore team introduced the first version of the SDK at the beginning of 2011. The SDK was a fork of the FoxTab installer and had only basic Installation features. InstallCore was discontinued as part of a company flotation in late 2020. == Criticism and malware classification == InstallCore and its software packages have been classified as potentially unwanted programs (PUP) or potentially unwanted applications (PUA), by anti-malware product vendors and Windows Defender Antivirus from 2014–2015 onwards, with many stating that it installs adware and other additional PUPs. Malwarebytes identified the program as "a family of bundlers that installs more than one application on the user's computer". It has been described as "crossing the line into full-blown malware" and a "nasty Trojan".

  Read more →
• 

  Python (programming language)

  Python is a high-level, general-purpose programming language that emphasizes code readability, simplicity, and ease-of-writing with the use of significant indentation, "plain English" naming, an extensive ("batteries-included") standard library, and garbage collection. Python supports multiple programming paradigms but with an emphasis on object-oriented programming and dynamic typing. Guido van Rossum began working on Python in the late 1980s as a successor to the ABC programming language. Python 3.0, released in 2008, was a major revision and not completely backward-compatible with earlier versions. Beginning with Python 3.5, capabilities and keywords for typing were added to the language, allowing optional static typing. As of 2026, the Python Software Foundation supports Python 3.10, 3.11, 3.12, 3.13, and 3.14, following the project's annual release cycle and five-year support policy. Python 3.15 is currently in the alpha development phase, and the stable release is expected to launch in October 2026. Earlier versions in the 3.x series have reached end-of-life and no longer receive security updates. Python has gained extensive use in the machine learning community. It is widely taught as an introductory programming language. Since 2003, Python has consistently ranked among the top ten most popular programming languages in the TIOBE Programming Community Index, which ranks programming languages based on searches across 24 platforms. == History == Python was conceived in the late 1980s by Guido van Rossum at Centrum Wiskunde & Informatica (CWI) in the Netherlands. It was designed as a successor to the ABC programming language, which was inspired by SETL, capable of exception handling and interfacing with the Amoeba operating system. Python implementation began in December 1989. Van Rossum first released it in 1991 as Python 0.9.0. Van Rossum assumed sole responsibility for the project, as the lead developer, until 12 July 2018, when he announced his "permanent vacation" from responsibilities as Python's "benevolent dictator for life" (BDFL); this title was bestowed on him by the Python community to reflect his long-term commitment as the project's chief decision-maker. (He has since come out of retirement and is self-titled "BDFL-emeritus".) In January 2019, active Python core developers elected a five-member Steering Council to lead the project. The name Python derives from the British comedy series Monty Python's Flying Circus. (See § Naming.) Python 2.0 was released on 16 October 2000, featuring many new features such as list comprehensions, cycle-detecting garbage collection, reference counting, and Unicode support. Python 2.7's end-of-life was initially set for 2015, and then postponed to 2020 out of concern that a large body of existing code could not easily be forward-ported to Python 3. It no longer receives security patches or updates. While Python 2.7 and older versions are officially unsupported, a different unofficial Python implementation, PyPy, continues to support Python 2, i.e., "2.7.18+" (plus 3.11), with the plus signifying (at least some) "backported security updates". Python 3.0 was released on 3 December 2008, and was a major revision and not completely backward-compatible with earlier versions, with some new semantics and changed syntax. Python 2.7.18, released in 2020, was the last release of Python 2. Several releases in the Python 3.x series have added new syntax to the language, and made a few (considered very minor) backward-incompatible changes. As of May 2026, Python 3.14.5 is the latest stable release. All older 3.x versions had a security update down to Python 3.9.24 then again with 3.9.25, the final version in 3.9 series. Python 3.10 is, since November 2025, the oldest supported branch. Python 3.15 has an alpha released, and Android has an official downloadable executable available for Python 3.14. Releases receive two years of full support followed by three years of security support. == Design philosophy and features == Python is a multi-paradigm programming language. Object-oriented programming and structured programming are fully supported, and many of their features support functional programming and aspect-oriented programming – including metaprogramming and metaobjects. Many other paradigms are supported via extensions, including design by contract and logic programming. Python is often referred to as a 'glue language' because it is purposely designed to be able to integrate components written in other languages. Python uses dynamic typing and a combination of reference counting and a cycle-detecting garbage collector for memory management. It uses dynamic name resolution (late binding), which binds method and variable names during program execution. Python's design offers some support for functional programming in the "Lisp tradition". It has filter, map, and reduce functions; list comprehensions, dictionaries, sets, and generator expressions. The standard library has two modules (itertools and functools) that implement functional tools borrowed from Haskell and Standard ML. Python's core philosophy is summarized in the Zen of Python (PEP 20) written by Tim Peters, which includes aphorisms such as these: Explicit is better than implicit. Simple is better than complex. Readability counts. Special cases aren't special enough to break the rules. Although practicality beats purity, errors should never pass silently, unless explicitly silenced. There should be one-- and preferably only one --obvious way to do it. However, Python has received criticism for violating these principles and adding unnecessary language bloat. Responses to these criticisms note that the Zen of Python is a guideline rather than a rule. The addition of some new features had been controversial: Guido van Rossum resigned as Benevolent Dictator for Life after conflict about adding the assignment expression operator in Python 3.8. Nevertheless, rather than building all functionality into its core, Python was designed to be highly extensible through modules. This compact modularity has made it particularly popular as a means of adding programmable interfaces to existing applications. Van Rossum's vision of a small core language with a large standard library and an easily extensible interpreter stemmed from his frustrations with ABC, which represented the opposite approach. Python claims to strive for a simpler, less-cluttered syntax and grammar, while giving developers a choice in their coding methodology. Python lacks do .. while loops, which Rossum considered harmful. In contrast to Perl's motto "there is more than one way to do it", Python advocates an approach where "there should be one – and preferably only one – obvious way to do it". In practice, however, Python provides many ways to achieve a given goal. There are at least three ways to format a string literal, with no certainty as to which one a programmer should use. Alex Martelli is a Fellow at the Python Software Foundation and Python book author; he wrote that "To describe something as 'clever' is not considered a compliment in the Python culture." Python's developers typically prioritize readability over performance. For example, they reject patches to non-critical parts of the CPython reference implementation that would offer increases in speed that do not justify the cost of clarity and readability. Execution speed can be improved by moving speed-critical functions to extension modules written in languages such as C, or by using a just-in-time compiler like PyPy. Also, it is possible to transpile to other languages. However, this approach either fails to achieve the expected speed-up, since Python is a very dynamic language, or only a restricted subset of Python is compiled (with potential minor semantic changes). Python is meant to be a fun language to use. This goal is reflected in the name – a tribute to the British comedy group Monty Python – and in playful approaches to some tutorials and reference materials. For instance, some code examples use the terms "spam" and "eggs" (in reference to a Monty Python sketch), rather than the typical terms "foo" and "bar". A common neologism in the Python community is pythonic, which has a broad range of meanings related to program style: Pythonic code may use Python idioms well; be natural or show fluency in the language; or conform with Python's minimalist philosophy and emphasis on readability. === Enhancement Proposals === Python Enhancement Proposals are a design document for either providing information to the Python community, or proposal for new feature in Python. PEPs are intented to explain new processes in Python, provide naming conventions or document the processes in the language. PEPs are overseen by Python Steering Council. There are 3 kinds of PEPs, with those are being standards track PEP, Informational PEP and Process PEPs which has their own unique meanings. They were firstly introduced in 2000, in

  Read more →