AI Detector By Quillbot

AI Detector By Quillbot — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

AI warfare

AI warfare refers to the use of artificial intelligence technologies to automate military operation and enhance or bypass human decision-making in armed conflicts. AI is used to rapidly analyze large volumes of military intelligence data, including making recommendations or decisions on who and what to target. Abdul-Rahman al-Rawi, a 20-year-old student, was the first acknowledged civilian killed by AI-assisted airstrike in a U.S. strike in Iraq in 2024. In 2026, the U.S. declared it would become an 'AI-first' warfighting force. Husain et al (2018) coined the term hyperwar to refer to warfare which is algorithmic or controlled by artificial intelligence, with little to no human decision-making. == 2026 Iran war == The 2026 Iran war has been described as the "first AI war", although the Untied States and Israel have previously used AI to identify targets during the Gaza war. The U.S. has used AI tools to attack Iran. These tools have been used for military intelligence, targeting, and damage assessment in the war in Iran. Using the Maven smart system, the U.S. attacked 1,000 targets in the first 24 hours of the war and 5,000 targets over the course of 10 days. While the U.S. had used Maven in 2022 to share targeting information with Ukraine and strike against Iraq, Syria, and against the Houthis in 2024, Iran's attacks are its biggest. Authorities are looking into whether artificial intelligence was involved in the airstrike on an Iranian girls' school that killed 170 civilians, the majority of whom were female students. The United States Central Command emphasized that humans were making final targeting decisions. Per a White House tally released on April 8, the U.S. military hit over 13,000 targets in Iran during the war's first 38 days, including more than 2,000 command-and-control sites, 1,500 air defense targets, and 1,450 industrial infrastructure targets. == Gaza war == As part of the Gaza war, the Israel Defense Forces (IDF) have used artificial intelligence to rapidly and automatically perform much of the process of determining what to bomb. IDF's Unit 8200 developed AI systems, dubbed the Gospel and Lavender, to find targets for the Israeli Air Force to bomb. The Gospel automatically provides targeting recommendations to human analysts, who decide whether to approve strikes. Lavender identified 37,000 Hamas-linked individuals early in the war, and was used alongside the Gospel, which chooses buildings or structures as targets. According to a report by +972 Magazine and Local Call, strikes assisted by Lavender were routinely permitted to kill 5–20 civilians for each suspected Hamas militant, who were often bombed at home with their families. The IDF denies these claims, maintaining that every strike is assessed to minimize collateral damage, and that there is no policy "to kill tens of thousands of people in their homes." Israel deployed AI technologies during the Gaza war for audio analysis, facial recognition, and airstrike targeting. One such system was used to help identify the location of Hamas commander Ibrahim Biari through phone call analysis, leading to strikes that killed him as well as more than 125 civilians. == 2022 Russian Ukraine war == Kyiv launched a project with Palantir called Brave1 Dataroom to build AI systems using the extensive combat data Ukraine has gathered since Russia’s full-scale invasion in 2022. The country has also created tools for in-depth airstrike analysis, introduced AI to process large volumes of intelligence, and incorporated these technologies into the planning of long-range strike operations. == Involved companies == Maven Smart System is developed by Palantir. It integrates Anthropic's Claude as its large language model, and uses Amazon's AWS servers as its cloud infrastructure. Since Anthropic's refusal to support autonomous weapons development and domestic surveillance efforts. In its place, other AI firms, including OpenAI, have been brought in to take over that role. == Involved state actors == In 2024, the United States Department of Defense had 800-plus active AI-related projects and requested $1.8 billion in AI funding, with Project Maven and Project Artemis (AI-resistant drones developed together with Ukraine) being the main ones. The technology has been used in Iran, Iraq, Syria and Yemen to identify targets. China is pursuing intelligentized warfare, integrating AI across all combat domains—land, sea, air, space, and cyber—with military AI spending exceeding $1.6 billion annually. == International regulation == Since 2014, states meeting within the framework of the Convention on Certain Conventional Weapons have discussed lethal autonomous weapon systems. In 2016, the treaty's states parties established an open-ended Group of Governmental Experts on Lethal Autonomous Weapons Systems to continue those discussions. The discussions have addressed international humanitarian law, accountability, possible prohibitions and regulations, and the extent of human control required over AI-enabled weapons.
Read more →
Pattern playback

The pattern playback is an early talking device that was built by Dr. Franklin S. Cooper and his colleagues, including John M. Borst and Caryl Haskins, at Haskins Laboratories in the late 1940s and completed in 1950. There were several different versions of this hardware device. Only one currently survives. The machine converts pictures of the acoustic patterns of speech in the form of a spectrogram back into sound. Using this device, Alvin Liberman, Frank Cooper, and Pierre Delattre (later joined by Katherine Safford Harris, Leigh Lisker, and others) were able to discover acoustic cues for the perception of phonetic segments (consonants and vowels). This research was fundamental to the development of modern techniques of speech synthesis, reading machines for the blind, the study of speech perception and speech recognition, and the development of the motor theory of speech perception. To create sound, the pattern playback machine uses an arc light source which is directed against a rotating disk with 50 concentric tracks whose transparencies vary systematically in order to produce 50 harmonics of a fundamental frequency. The light is further projected against a spectrogram, whose reflectance corresponds to the sound pressure level of the partial of the signal, and is then directed towards a photovoltaic cell by which the light variation is converted into sound pressure variations. The pattern playback was last used in an experimental study by Robert Remez in 1976. The pattern playback now resides in the Museum at Haskins Laboratories in New Haven, Connecticut. The technique of pattern playback also now refers, more generally, to algorithms or techniques for converting spectrograms, cochleagrams, and correlograms from pictures back into sounds. A demonstration is in the TV show Adventure. Pioneering technology in psycholinguistics (CBS Television. 1953). == Digital pattern playback == In the 1970s, digital pattern playbacks began to supplant the earlier version. An early prototype was developed by Patrick Nye, Philip Rubin, and colleagues at Haskins Laboratories. It combined a "Ubiquitous Spectrum Analyzer"[1] for automatic spectral analysis, along with a VAX GT-40 display processor for graphic manipulation of the displayed spectrogram, a form of "synthesis by art", and subsequent re-synthesis using a 40 channel filter bank. This hybrid hardware/software digital pattern playback was eventually replaced at Haskins Laboratories by the HADES analysis and display system, designed by Philip Rubin, and implemented in Fortran on the VAX family of computers. A more modern version has been described by Arai and colleagues [2]. An on-line demonstration is available [3].
Read more →
Shadow and highlight enhancement

Shadow and highlight enhancement refers to an image processing technique used to correct exposure. The use of this technique has been gaining popularity, making its way onto magazine covers, digital media, and photos. It is, however, considered by some to be akin to other destructive Photoshop filters, such as the Watercolor filter, or the Mosaic filter. == Shadow recovery == A conservative application of the shadow/highlight tool can be very useful in recovering shadows, though it tends to leave a telltale halo around the boundary between highlight and shadow if used incorrectly. A way to avoid this is to use the bracketing technique, although this usually requires a tripod. == Highlight recovery == Recovering highlights with this tool, however, has mixed results, especially when using it on images with skin in them, and often makes people look like they have been "sprayed with fake tan". == Shadow brightening - manual == One way to brighten shadows in image editing software such as GIMP or Adobe Photoshop is to duplicate the background layer, invert the copy and set the blend modes of that top layer to "Soft Light". You can also use an inverted black and white copy of the image as a mask on a brightening layer, such as Curves or Levels. == Shadow brightening - automatic == Several automatic computer image processing-based shadow recovery and dynamic range compression methods can yield a similar effect. Some of these methods include the retinex method and homomorphic range compression. The retinex method is based on work from 1963 by Edwin Land, the founder of Polaroid. Shadow enhancement can also be accomplished using adaptive image processing algorithms such as adaptive histogram equalization or contrast limiting adaptive histogram equalization (CLAHE).
Read more →
Beauty.AI

Beauty.AI is a mobile beauty pageant for humans and a contest for programmers developing algorithms for evaluating human appearance. The mobile app and website created by Youth Laboratories that uses artificial intelligence technology to evaluate people's external appearance through certain algorithms, such as symmetry, facial blemishes, wrinkles, estimated age and age appearance, and comparisons to actors and models. The Beauty.AI 2.0 contest caused great concern over important ethical issues with deep neural networks such as age, race and gender bias and lead to the creation of the Diversity.AI think tank dedicated to developing new methods for uncovering and managing bias in artificially intelligent systems. Beauty.AI was also an attempt to find approaches on how machines can perceive human face through evaluating particular features, commonly associated with health and beauty. == Concept == The Beauty.AI app was created by Youth Laboratories, a company based out of Russia and Hong Kong that focuses on facial skin analytics. The bioinformation company Insilico Medicine assists in the Beauty.AI app by testing its deep learning techniques to the app. One goal of the app is to reduce the need for human and animal testing as well as improving people's overall health. Its first contest was started in December 2016, and the results were announced in August 2016. More than 60,000 people submitted entries into the contest. The mobile app uses artificial intelligence technology to inspect photographs for certain facial features in order to both determine a person's beauty through artificial means by multiple robots. Part of the Beauty.AI app's purpose is to collect visual and anecdotal data to improve its creator's Youth Laboratories skin analyst skills. == Accusations of racism == There were a total of 44 individuals from different age groups and genders judged as the most attractive, with 37 white entrants, six Asian entrants, and one dark-skinned entrant. The app has received criticism from social justice advocates and computer science professionals. However, Alex Zhavoronkov, PhD, chief science officer of Youth Laboratories and chief technology officer Konstantin Kiselev, both for Youth Laboratories, noted that a lack of data may have contributed to these results. Also, Kiselev added that another issue was that approximately 75% of entrants were white Europeans, whereas only 7% and 1% were from India and Africa, respectively. Kiselev stated that they would work on doing more and better outreach to these areas to improve in this area. Despite this, it was said by Dr. Zhavoronkov that the AI would discard photos of dark-skinned people if the lighting is too poor. Dr. Zhavoronkov vowed to weed out the issues for the next beauty pageant and to try to avoid a similar controversy in the future.
Read more →
Zo (chatbot)

Zo was an English-language chatbot developed by Microsoft as the successor to the chatbot Tay. Zo was an English version of Microsoft's other successful chatbots Xiaoice (China) and Rinna (Japan) and its predecessor Tay(English) == History == Zo was first launched in December 2016 on the Kik Messenger app. It was also available to users of Facebook (via Messenger), the group chat platform GroupMe, or to followers of Twitter to chat with it through private messages. According to an article written in December 2016, at that time Zo held the record for Microsoft's longest continual chatbot conversation: 1,229 turns, lasting 9 hours and 53 minutes. In a BuzzFeed News report, Zo told their reporter that "[the] Quran was violent" when talking about healthcare. The report also highlighted how Zo made a comment about the Osama bin Laden capture as a result of 'intelligence' gathering. In July 2017, Business Insider asked "is windows 10 good", and Zo replied with a joke about Microsoft's operating system: "'Its not a bug, its a feature!' - Windows 8". They then asked "why?", to which Zo replied: "Because it's Windows latest attempt at Spyware." Later on, Zo would tell that it prefers Windows 7 on which it ran over Windows 10. Zo stopped posting to Instagram, Twitter and Facebook March 1, 2019, and stopped chatting on Twitter, Skype and Kik as of March 7, 2019. On July 19, 2019, Zo was discontinued on Facebook, and Samsung on AT&T phones. As of September 7, 2019, it was discontinued with GroupMe. == Reception == Zo came under criticism for the biases introduced in an effort to avoid potentially offensive subjects. The chatbot refuses, for example, to engage with any mention—be it positive, negative or neutral—of the Middle East, the Qur'an or the Torah, while allowing discussion of Christianity. In an article in Quartz where she exposed those biases, Chloe Rose Stuart-Ulin wrote, "Zo is politically correct to the worst possible extreme; mention any of her triggers, and she transforms into a judgmental little brat." == Academic coverage == Schlesinger, A., O'Hara, K.P. and Taylor, A.S., 2018, April. Let's talk about race: Identity, chatbots, and AI. In Proceedings of the 2018 chi conference on human factors in computing systems (pp. 1–14). doi:10.1145/3173574.3173889 Medhi Thies, I., Menon, N., Magapu, S., Subramony, M. and O’neill, J., 2017. How do you want your chatbot? An exploratory Wizard-of-Oz study with young, urban Indians. In Human-Computer Interaction-INTERACT 2017: 16th IFIP TC 13 International Conference, Mumbai, India, September 25–29, 2017, Proceedings, Part I 16 (pp. 441–459). doi:10.1007/978-3-319-67744-6_28
Read more →
Adobe PhotoDeluxe

PhotoDeluxe was a consumer-oriented image editing software line published by Adobe Systems from 1996 until July 8, 2002. At that time it was replaced by Adobe's newly launched consumer-oriented image editing software Photoshop Elements. Adobe no longer provides technical support for the PhotoDeluxe software line. PhotoDeluxe had a range of image processing capabilities for the home photographer and image handler. These included removing red-eye, cropping, and adjusting brightness, contrast, and sharpness. It also included software to extract pictures from an image scanner. Among the functionality included was the ability to dynamically resize photos and export them in a wide range of formats. It also had a range of printing options including printing multiple copies of an image on the same page. It was often bundled free with Epson scanners or as free software with new computers. == Features == Despite the critical concerns regarding the quality of the setup, Photo Deluxe supports layering, blurs, sharpening, cloning, gradient fills, color and background switches, color variations, resizing options, and many other features. Another drawback of PhotoDeluxe was that it was designed for Mac computers, so working on Windows PC was a problem for those who were unable to customize their preferences. == Versions == === Adobe PhotoDeluxe 1.0 === The first version was released in 1996 for Windows and Macintosh computers. In one year, it sold over one million copies. === Adobe PhotoDeluxe 2.0 === The new version was released in 1997 and had added features such as a Clone Tool, red-eye removal, and sample templates for making posters, cards, and calendars. It also had new special effect features. === Adobe PhotoDeluxe 3.0 === The 3rd version was released in 1998. The new features included customizable clipart settings, the ability to import photos on the web, enhanced repair activities following Guided Activities, and Adobe Connectables to add new activities. === Adobe PhotoDeluxe Home Edition (4.0) === Version 4.0 was created by the makers of Photoshop. It had advanced abilities such as tools to add animation, voice, and music to a picture. It also had features to restore photos to their original position. == History == Adobe PhotoDeluxe 1.0 was released in 1996 for Macintosh computers, initially retailing for an MSRP of $49. The software did quite well, reportedly selling over a million copies by February of the next year, primarily due to bundles with companies like Apple and Hewlett-Packard. PhotoDeluxe was primarily advertised to consumers as a way to do basic photo manipulation, such as cropping and rotating images, or creating simple cards and calendars. PhotoDeluxe 2.0 was released in 1997, and was the last version of PhotoDeluxe that Adobe made that worked on Macs. PhotoDeluxe 2.0 became the "number one selling consumer photo-editing software product in the world." PhotoDeluxe 3.0 was released in 1998, where it was rebranded as "3.0 Home Edition", as Adobe released PhotoDeluxe Business Edition later that year for a higher price. PhotoDeluxe Home Edition, unofficially called PhotoDeluxe 4.0, was released in 1999 and was the last version of PhotoDeluxe to be released. Adobe officially cancelled PhotoDeluxe on July 8, 2002, citing the presence of Photoshop and Photoshop Elements, with support being officially cancelled in mid-2003. No version of PhotoDeluxe is compatible with Windows 10, rendering the program obsolete. == Pricing == All home versions of PhotoDeluxe retailed for an MSRP of $49. PhotoDeluxe 2.0 and onwards allowed users to upgrade from a previous version of PhotoDeluxe or a competing piece of graphics software for $39. Additionally PhotoDeluxe Business Edition allowed a similar deal, allowing users to upgrade from other versions of PhotoDeluxe or a competing software for $59, instead of its normal price of $99. Adobe also offered a bundle allowing users of 1.0 or 2.0 to get 3.0 and Business Edition for $79.
Read more →
KoalaPad

The KoalaPad is a graphics tablet, released in 1983 by US company Koala Technologies Corporation, for the Apple II, TRS-80 Color Computer (as the TRS-80 Touch Pad), Atari 8-bit computers, Commodore 64, and IBM PC compatibles. Originally designed by Dr. David Thornburg as a low-cost computer drawing tool for schools, the Koala Pad and the bundled drawing program, KoalaPainter, was popular with home users as well. KoalaPainter was called KoalaPaint in some versions for the Apple II, and PC Design for the IBM PC. A program called Graphics Exhibitor was included for creating slideshow presentations from KoalaPainter drawings. == Description == The pad was four inches square (i.e. roughly 10×10 cm) and mounted on a slightly inclined base with the back of the pad higher than the front. At the top, "behind" the pad, were two buttons. The pad hooked into the computer using the analog signals of the joystick ports (the so-called paddle inputs), which meant that it had a low resolution and tended to jostle the cursor if moved during use. As an alternative to the drawing stylus, the pad could as easily be operated by the user's fingers for tasks that demanded less precision, such as selecting between menu items (thus using the pad as a kind of "indirect touch screen"). The top-mounted buttons tended to be somewhat frustrating to use, as the user had to "reach around" the stylus to push the buttons in order to start or stop drawing. A similar tablet from Atari, the Atari CX77 Touch Tablet, addressed this with a built-in button on the stylus, which some enterprising users adapted for use with their KoalaPad. == KoalaPainter == The pad shipped with a simple bitmap graphics editor developed by Audio Light called KoalaPainter, PC Design or Micro Illustrator depending on the target machine (see release history). Although bundled with the pad, KoalaPainter could also be operated using an ordinary digital joystick. One unique feature of the program, for its time, was that it held two pictures in the computer's memory, allowing the user to flip from one to the other—a function commonly used in order to study the differences between an original and a modified picture, and to copy and paste between two different pictures. Some third-party bitmap editors could also be used with the KoalaPad, such as Broderbund's Dazzle Draw for the Apple II. === Release history === KoalaPainter for Commodore 64 (1983) and Atari 8-bit computers (1983) PC Design for the IBM PC (1983) Micro Illustrator for the Apple II (1983), Atari 8-bit computers (1983) and Commodore Plus/4 (1984) KoalaPainter II for Commodore 64 (1984) === Reception === Ahoy! called KoalaPainter "a very powerful and effective color drawing package", and concluded that it and the KoalaPad were "excellent in ease of use, a fine choice for a beginner as well as young children". BYTE's reviewer stated in December 1984 that he made far fewer errors when using an Apple Mouse with MousePaint than with a KoalaPad and its software. He found that MousePaint was easier to use and more efficient, predicting that the mouse would receive more software support than the pad. Cassie Stahl in InfoWorld's Essential Guide to Atari Computers praised the tablet and its documentation, rating it "Excellent" among all categories and stating that "Playing with the KoalaPad becomes addictive. It does everything it claims to, and it does it well". She also liked Micro Illustrator, rating it "Excellent" except for "Good" for Performance. While criticizing the limited erase function, Stahl reported an undocumented feature enabling exporting pictures to other software. === File format === The Commodore 64 version of KoalaPainter used a fairly simple file format corresponding directly to the way bitmapped graphics are handled on the computer: A two-byte load address, followed immediately by 8,000 bytes of raw bitmap data, 1,000 bytes of raw "Video Matrix" data, 1,000 bytes of raw "Color RAM" data, and a one-byte Background Color field. == KoalaWare == Koala Technologies offered more software beyond the bundled KoalaPainter and Graphics Exhibitor for use with the pad. Among these applications, marketed under the moniker KoalaWare (like KoalaPainter itself), was educational software for use with customized keypads and overlays, such as spelling tools, music programs, and mathematics instruction software, as well as software for "translating" graphical designs into Logo programs.
Read more →
Steerable filter

In image processing, a steerable filter is an orientation-selective filter that can be computationally rotated to any direction. Rather than designing a new filter for each orientation, a steerable filter is synthesized from a linear combination of a small, fixed set of "basis filters". This approach is efficient and is widely used for tasks that involve directionality, such as edge detection, texture analysis, and shape-from-shading. The principle of steerability has been generalized in deep learning to create equivariant neural networks, which can recognize features in data regardless of their orientation or position. == Example == A common example of a steerable filter is the first derivative of a two-dimensional Gaussian function. This filter responds strongly to oriented image features like edges. It is constructed from two basis filters: the partial derivative of the Gaussian with respect to the horizontal direction ( x {\displaystyle x} ) and the vertical direction ( y {\displaystyle y} ). If G ( x , y ) {\displaystyle G(x,y)} is the Gaussian function, and G x {\displaystyle G_{x}} and G y {\displaystyle G_{y}} are its partial derivatives (which measure the rate of change in the x {\displaystyle x} and y {\displaystyle y} directions, respectively), a new filter G θ {\displaystyle G_{\theta }} oriented at an angle θ {\displaystyle \theta } can be synthesized with the formula: G θ = cos ⁡ ( θ ) G x + sin ⁡ ( θ ) G y {\displaystyle G_{\theta }=\cos(\theta )G_{x}+\sin(\theta )G_{y}} Here, the basis filters G x {\displaystyle G_{x}} and G y {\displaystyle G_{y}} are weighted by cos ⁡ ( θ ) {\displaystyle \cos(\theta )} and sin ⁡ ( θ ) {\displaystyle \sin(\theta )} to "steer" the filter's sensitivity to the desired orientation. This is equivalent to taking the dot product of the direction vector ( cos ⁡ θ , sin ⁡ θ ) {\displaystyle (\cos \theta ,\sin \theta )} with the filter's gradient, ( G x , G y ) {\displaystyle (G_{x},G_{y})} . == Generalization in deep learning: Equivariant neural networks == The concept of steerability is foundational to equivariant neural networks, a class of models in deep learning designed to understand symmetries in data. A network is considered equivariant to a transformation (like a rotation) if transforming the input and then passing it through the network produces the same result as passing the input through the network first and then transforming the output. Formally, for a transformation T {\displaystyle T} and a network f {\displaystyle f} , this property is defined as f ( T ( input ) ) = T ( f ( input ) ) {\displaystyle f(T({\text{input}}))=T(f({\text{input}}))} . This built-in understanding of geometry makes models more data-efficient. For example, a network equivariant to rotation does not need to be shown an object in multiple orientations to learn to recognize it; it inherently understands that a rotated object is still the same object. This leads to better generalization and performance, particularly in scientific applications. === Mathematical foundation === Equivariant neural networks use principles from group theory to create operations that respect geometric symmetries, such as the SO(3) group for 3D rotations or the E(3) group for rotations and translations. Instead of learning standard filter kernels, these networks learn how to combine a fixed set of basis kernels. These basis functions are chosen so that they have well-defined behaviors under transformation groups. Spherical harmonics are frequently used as basis functions because they form a complete set of functions that behave predictably under rotation, making them ideal for creating steerable 3D kernels. Features within the network are treated as geometric tensors, which are mathematical objects (like scalars or vectors) that are "typed" by their behavior under transformations. These types correspond to the irreducible representations (irreps) of the group. The tensor product is the fundamental operation used to combine these typed features in a way that preserves equivariance, guaranteeing that the network as a whole respects the desired symmetry. Frameworks like e3nn simplify the construction of these networks by automating the complex mathematics of irreducible representations and tensor products. === Applications === Steerable and equivariant models are highly effective for problems with inherent geometric symmetries. Examples include: Protein structure analysis: SE(3)-equivariant networks can process 3D molecular structures while respecting their rotational and translational symmetries. 3D Point cloud processing: Rotation-equivariant filters built from steerable spherical functions can perform tasks like 3D shape classification. Computational chemistry: E(3)-equivariant graph neural networks are used to model interatomic potentials for molecular dynamics simulations, creating highly accurate and data-efficient models of physical systems.
Read more →
Douglas Parkhill

Douglas F. Parkhill is a Canadian technologist and former research minister, best known for his pioneering work on what is now called cloud computing, and his work on Canada's Telidon videotex project. He started working at the Canadian ministry of Communications (now part of the Department of Trade and Industry) in 1969, having previously worked at the Mitre Corporation. He was responsible for many activities in communications satellites, computer communications, command and control systems and telecommunications. He was winner of the Treasury Board of Canada Secretariat's Outstanding Achievement award in 1982, the Conestoga shield for services to government and industry in computer communications research and development, the Touche Ross award for Telidon development. He was an author of several publications including the 1966 book, The Challenge of the Computer Utility. In the book, Parkhill thoroughly explored many of the modern-day characteristics of cloud computing (elastic provisioning through a utility service) as well as the comparison to the electricity industry and the use of public, private, government and community forms. The book won the McKinsey Foundation award for distinguished contributions to management literature. He worked with Dave Godfrey, the Canadian writer and novelist on a later book Gutenberg two about the social and political meaning of computer technology. He was in charge of research at the Federal Department of Communications at the time when the department was funding development of the Telidon videotext system, was heavily involved in promoting the system, and had overall control of the program. In a radio broadcast in 1980, he outlined some of the potential of the system, from financial information, to theatre reservations, with the ability to pay and print out tickets from the system. He later documented the history of the Telidon project, and the history of videotext in general. == Publications == The Challenge of the Computer Utility, Addison-Wesley, 1966, ISBN 0-201-05720-4 edited with Dave Godfrey, Gutenberg Two: The New Electronics and Social Change, Press Porcepic, 1979, ISBN 0-88878-191-1 The Beginning of a Beginning. Ottawa; Department of Communications, 1987. A history of the Telidon project.
Read more →
Adobe GoLive

Adobe GoLive was a WYSIWYG HTML editor and web site management application from Adobe Systems. It replaced Adobe PageMill as Adobe's primary HTML editor and was itself discontinued in favor of Dreamweaver. The last version of GoLive that Adobe released was GoLive 9. == History == GoLive originated as the flagship product of a company named GoNet Communication, Inc. then based in Menlo Park, California, and the development company GoNet Communications GmbH in Hamburg, Germany, in 1996. Later GoNet changed its name to GoLive Systems, Inc, and the name of its product to GoLive CyberStudio. Adobe acquired GoLive in 1999 and re-branded the GoLive CyberStudio product to what became Adobe GoLive. Adobe took over the Hamburg office as an Adobe development site to continue to develop the product. At the time of the acquisition, CyberStudio was a Macintosh-only application. In the spring of 1999 Adobe released Adobe GoLive for both Macintosh and Microsoft Windows. The first versions of Dreamweaver and CyberStudio were released in a similar timeframe. However, Dreamweaver eventually became the dominant WYSIWYG HTML editor in market share. After the Adobe acquisition of Macromedia (the company that had owned Dreamweaver), GoLive was progressively re-targeted toward Adobe's traditional design market, and the product became better integrated with Adobe's existing suite of design-oriented software products and less focused on the professional web development market. The Adobe CS2 Premium suite contained GoLive CS2. With the release of Creative Suite 3, Adobe integrated Dreamweaver as a replacement for GoLive and released GoLive 9 as a standalone product. In April 2008, Adobe announced that sales and development of GoLive would cease in favor of Dreamweaver. == General description and distinctive aspects == GoLive incorporated a largely modeless workflow that relied heavily on drag-and-drop. Most user interaction was done via a contextual inspector rather than the modal workflow found in Dreamweaver. Among its features were a separate editor for tables that supported nesting, and a two-dimensional panel for applying CSS styles to elements. GoLive supported drag-and-drop of native Adobe Photoshop and Adobe Illustrator files via what the company called "Smart Objects", which then automatically guided the user through saving those files in web-supported formats. Updates to the original Photoshop or Illustrator assets were automatically tracked by GoLive. It also implemented a tool called "Components" which allowed updates to interface elements throughout a site to be updated globally by changing one single file. As a website management tool, GoLive allowed users to transfer and publish content directly from within the application, and allowed individual files to be excluded from uploading. == Features == One of the new features of GoLive version 5 was Dynamic Link, which was a method of creating dynamic, database-driven web content without the need to know a server-side language and with full WYSIWYG support in the GoLive user interface. GoLive had a powerful set of extensibility API which could be used to add additional functionality to the product. The GoLive SDK provided interfaces which allowed developers to use a combination of XML, JavaScript and C/C++ to create plugins for the product. The extensibility API allowed developers access to custom drawing and event handling using JavaScript, as well as a full JavaScript debugger and command line interpreter. This allowed intermediate-level developers using interpreted JavaScript to create sophisticated user interfaces. == Language and framework structure == Adobe GoLive is coded in the C++ programming language. It uses a custom C++ framework called SCL (Simple Class Library) which was initially built from scratch by the engineers at GoLive Systems Inc. The SCL framework was also used in the short-lived Adobe Atmosphere 3D software. == Release history == As the final version, GoLive 9 was discontinued in April 2008.
Read more →
Avid DS

Avid DS (which was called Avid DS Nitris until early 2008) is a high-end offline and finishing system comprising a non-linear editing system and visual effects software. It was developed by Softimage (this company was owned by Microsoft at the time of DS v1.0's launch before being acquired from Microsoft by Avid Technology, Inc. shortly thereafter) in Montreal. DS was discontinued on September 30, 2013 with support ending on the same date the following year. == Software == DS was called ‘Digital Studio’ in development. It was envisioned to be a complete platform for video/audio work. The first previews of the system were on the SGI platform, but this version was never released. The system was rewritten on Windows NT with different video hardware platforms (Matrox DigiSuite or Play Trinity running on a NetPower system) before the final system was released on Intergraph/StudioZ hardware in January 1998. After its acquisition by Avid, DS was always positioned as a high end video finishing tool. However, many users found it to be uniquely soup-to-nuts in its capabilities. From version 1.0 of the product, it competed with products like Autodesk Smoke, Quantel and Avid Symphony. The toolset in DS offered video timeline editing, an object-oriented vector-based paint tool, 2D layer compositing, sample based audio and starting with version 3.01 of the product, a 3D environment. Originally, a subset of the Softimage|XSI 3D software was planned to become part of the DS toolset, both were built on the same software foundation, but over time the code bases divided between the applications and the integration never happened. While the first version of the DS still lacked a few key features (no 3D, poor keying, no real-time effects), it had some significant features compared to the competing products at the time. It offered a large number of built in effects. Avid OMF import was available, positioning Softimage DS as a strong finishing tool for then typical off-line Avid systems. Lastly the integration of the toolset of Softimage DS was beyond what other product offered. A Softimage DS user could quickly go from editing, to paint, to compositing with a few mouse clicks all inside the same interface. Some of the lacking features were quickly resolved, within months of version 1.0 a new chroma keyer was released. Early versions of the software (up thru 4.0) added additional key features. Development continued with one of the first uncompressed HD editing systems (version 4.01) and an attempt to make the system more friendly to Media Composer editors in version 6. In later versions (v7.5 on beyond) DS was criticized for slow development of compositing tools, mainly lack of a new 3D environment and better tracking tools. Many DS users felt that Avid had not been giving DS the attention that it deserved. On July 7, 2013, Avid sent out an email marking the end of life of the DS product. "To Our Avid DS customers, We are writing to inform you that Avid will be realigning our business strategy to focus on a core suite of products to best leverage our developmental and creative resources. As part of this transition, we will be ceasing future development of Avid DS with a final sale date of September 30th, 2013" == Hardware == Up until version 10.5, DS was sold as a turn-key system; the software was not available without purchasing CPU, I/O and storage hardware from Avid. Beginning with 10.5, customers were able to configure their own systems using widely available components, based on recommended system requirements. In turn-key systems, there were many hardware refreshes over time. StudioZ single stream: Intergraph TDZ-425 with 30 minutes of uncompressed SCSI storage. CPUs at the time were Pentium II/300 MHz. StudioZ dual stream: Intergraph TDZ-2000 GT1 with one hour of fibre channel storage. CPUs on first systems were Pentium II/400 MHz, but last shipping systems had Pentium III/1 GHz. DS was one of the first applications to show that real-time effects could be processed with just the CPUs of the system, not requiring special video cards with real-time effect hardware. Equinox: Developed by Avid, it was one of the first uncompressed HD video cards available. Systems were available on CPUs from Pentium III/1 GHz to Pentium 4/2.8 GHz. Storage was typically SCSI, but fibre channel was also supported. Nitris DNA: Developed by Avid, the Nitris hardware was probably the largest hardware update to the system since it was released. 10-bit HD and SD support was standard. Real-time down and cross convert. This was the only hardware for DS that had on-board effect processing. This allowed a system at the time to play back dual-stream uncompressed HD effects in real-time at 16-bit precision. This was also the first hardware from Avid to support the DNxHD codec. Starting with Pentium 4, Intel Core Xeons were supported. SCSI storage was primarily used. AJA Video Systems: First available as a 4:4:4 option to be used in conjunction with Nitris hardware. Final-generation DS systems used the AJA Video Systems Kona 3 (Xena 2K) card as the only I/O for the system. The last systems shipped with two Intel Core Xeon 6-core processors. SAS is the recommended storage for these systems. == History ==
Read more →
Sub-pixel resolution

In digital image processing, sub-pixel resolution can be obtained in images constructed from sources with information exceeding the nominal pixel resolution of said images. == Example == For example, if the image of a ship of length 50 metres (160 ft), viewed side-on, is 500 pixels long, the nominal resolution (pixel size) on the side of the ship facing the camera is 0.1 metres (3.9 in). Now sub-pixel resolution of well resolved features can measure ship movements which are an order of magnitude (10×) smaller. Movement is specifically mentioned here because measuring absolute positions requires an accurate lens model and known reference points within the image to achieve sub-pixel position accuracy. Small movements can however be measured (down to 1 cm) with simple calibration procedures. Specific fit functions often suffer specific bias with respect to image pixel boundaries. Users should therefore take care to avoid these "pixel locking" (or "peak locking") effects. == Determining feasibility == Whether features in a digital image are sharp enough to achieve sub-pixel resolution can be quantified by measuring the point spread function (PSF) of an isolated point in the image. If the image does not contain isolated points, similar methods can be applied to edges in the image. It is also important when attempting sub-pixel resolution to keep image noise to a minimum. This, in the case of a stationary scene, can be measured from a time series of images. Appropriate pixel averaging, through both time (for stationary images) and space (for uniform regions of the image) is often used to prepare the image for sub-pixel resolution measurements.
Read more →
Intelligent control

Intelligent control is a class of control techniques that use various artificial intelligence computing approaches like neural networks, Bayesian probability, fuzzy logic, machine learning, reinforcement learning, evolutionary computation and genetic algorithms. == Overview == Intelligent control can be divided into the following major sub-domains: Neural network control Machine learning control Reinforcement learning Bayesian control Fuzzy control Neuro-fuzzy control Expert Systems Genetic control New control techniques are created continuously as new models of intelligent behavior are created and computational methods developed to support them. === Neural network controller === Neural networks have been used to solve problems in almost all spheres of science and technology. Neural network control basically involves two steps: System identification Control It has been shown that a feedforward network with nonlinear, continuous and differentiable activation functions have universal approximation capability. Recurrent networks have also been used for system identification. Given, a set of input-output data pairs, system identification aims to form a mapping among these data pairs. Such a network is supposed to capture the dynamics of a system. For the control part, deep reinforcement learning has shown its ability to control complex systems. === Bayesian controllers === Bayesian probability has produced a number of algorithms that are in common use in many advanced control systems, serving as state space estimators of some variables that are used in the controller. The Kalman filter and the Particle filter are two examples of popular Bayesian control components. The Bayesian approach to controller design often requires an important effort in deriving the so-called system model and measurement model, which are the mathematical relationships linking the state variables to the sensor measurements available in the controlled system. In this respect, it is very closely linked to the system-theoretic approach to control design.
Read more →
Comparison of user features of messaging platforms

Comparison of user features of messaging platforms refers to a comparison of all the various user features of various electronic instant messaging platforms. This includes a wide variety of resources; it includes standalone apps, platforms within websites, computer software, and various internal functions available on specific devices, such as iMessage for iPhones. This entry includes only the features and functions that shape the user experience for such apps. A comparison of the underlying system components, programming aspects, and other internal technical information, is outside the scope of this entry. == Overview and background == Instant messaging technology is a type of online chat that offers real-time text transmission over the Internet. A LAN messenger operates in a similar way over a local area network. Short messages are typically transmitted between two parties when each user chooses to complete a thought and select "send". Some IM applications can use push technology to provide real-time text, which transmits messages character by character, as they are composed. More advanced instant messaging can add file transfer, clickable hyperlinks, Voice over IP, or video chat. Non-IM types of chat include multicast transmission, usually referred to as "chat rooms", where participants might be anonymous or might be previously known to each other (for example collaborators on a project that is using chat to facilitate communication). Instant messaging systems tend to facilitate connections between specified known users (often using a contact list also known as a "buddy list" or "friend list"). Depending on the IM protocol, the technical architecture can be peer-to-peer (direct point-to-point transmission) or client-server (an Instant message service center retransmits messages from the sender to the communication device). By 2010, instant messaging over the Web was in sharp decline, in favor of messaging features on social networks. The most popular IM platforms were terminated, such as AIM which closed down and Windows Live Messenger which merged into Skype. Instant messaging has since seen a revival in popularity in the form of "messaging apps" (usually on mobile devices) which by 2014 had more users than social networks. As of 2010, social networking providers often offer IM abilities. Facebook Chat is a form of instant messaging, and Twitter can be thought of as a Web 2.0 instant messaging system. Similar server-side chat features are part of most dating websites, such as OkCupid or PlentyofFish. The spread of smartphones and similar devices in the late 2000s also caused increased competition with conventional instant messaging, by making text messaging services still more ubiquitous. Many instant messaging services offer video calling features, voice over IP and web conferencing services. Web conferencing services can integrate both video calling and instant messaging abilities. Some instant messaging companies are also offering desktop sharing, IP radio, and IPTV to the voice and video features. The term "Instant Messenger" is a service mark of Time Warner and may not be used in software not affiliated with AOL in the United States. For this reason, in April 2007, the instant messaging client formerly named Gaim (or gaim) announced that they would be renamed "Pidgin". In the 2010s, more people started to use messaging apps on modern computers and devices like WhatsApp, WeChat, Viber, Facebook Messenger, Telegram, Signal and Line rather than instant messaging on computers like AIM and Windows Live Messenger. For example, WhatsApp was founded in 2009, and Facebook acquired in 2014, by which time it already had half a billion users. === Concepts === ==== Backchannel ==== Backchannel is the practice of using networked computers to maintain a real-time online conversation alongside the primary group activity or live spoken remarks. The term was coined in the field of linguistics to describe listeners' behaviours during verbal communication. (See Backchannel (linguistics).) The term "backchannel" generally refers to online conversation about the conference topic or speaker. Occasionally backchannel provides audience members a chance to fact-check the presentation. First growing in popularity at technology conferences, backchannel is increasingly a factor in education where WiFi connections and laptop computers allow participants to use ordinary chat like IRC or AIM to actively communicate during presentation. More recent research include works where the backchannel is brought publicly visible, such as the ClassCommons, backchan.nl and Fragmented Social Mirror. Twitter is also widely used today by audiences to create backchannels during broadcasting of content or at conferences. For example, television drama, other forms of entertainment and magazine programs. This practice is often also called live tweeting. Many conferences nowadays also have a hashtag that can be used by the participants to share notes and experiences; furthermore such hashtags can be user generated. == Features == Various platforms and apps are distinguished by their strengths and features in regards to specific functions. === Group messaging === === Official channels === Some apps include a feature known as "official channels" which allows companies, especially news media outlets, publications, and other mass media companies, to offer an official channel, which users can join, and thereby receive regular updates, published articles, or news updates from companies or news outlets. Two apps which have a large amount of such channels available are Line and Telegram. === Video group calls === == Basic default platforms == Basic platforms which are common across entire categories of mobile devices, computers, or operating systems. === SMS === SMS (short message service) is a text messaging service component of most telephone, Internet, and mobile device systems. It uses standardized communication protocols to enable mobile devices to exchange short text messages. An intermediary service can facilitate a text-to-voice conversion to be sent to landlines. SMS, as used on modern devices, originated from radio telegraphy in radio memo pagers that used standardized phone protocols. These were defined in 1985 as part of the Global System for Mobile Communications (GSM) series of standards. The first test SMS message was sent on December 3, 1992, when Neil Papwort, a test engineer for Sema Group, used a personal computer to send "Merry Christmas" to the phone of colleague Richard Jarvis. It commercially rolled out to many cellular networks that decade. SMS became hugely popular worldwide as a way of text communication. By the end of 2010, SMS was the most widely used data application, with an estimated 3.5 billion active users, or about 80% of all mobile phone subscribers. The protocols allowed users to send and receive messages of up to 160 characters (when entirely alpha-numeric) to and from GSM mobiles. Although most SMS messages are sent from one mobile phone to another, support for the service has expanded to include other mobile technologies, such as ANSI CDMA networks and Digital AMPS. Mobile marketing, a type of direct marketing, uses SMS. According to a 2018 market research report the global SMS messaging business was estimated to be worth over US$100 billion, accounting for almost 50 percent of all the revenue generated by mobile messaging. A Flash SMS is a type of SMS that appears directly on the main screen without user interaction and is not automatically stored in the inbox. It can be useful in emergencies, such as a fire alarm or cases of confidentiality, as in delivering one-time passwords. ==== Threaded SMS format ==== Threaded SMS is a visual styling orientation of SMS message history that arranges messages to and from a contact in chronological order on a single screen. It was first invented by a developer working to implement the SMS client for the BlackBerry, who was looking to make use of the blank screen left below the message on a device with a larger screen capable of displaying far more than the usual 160 characters, and was inspired by threaded Reply conversations in email. Visually, this style of representation provides a back-and-forth chat-like history for each individual contact. Hierarchical-threading at the conversation-level (as typical in blogs and on-line messaging boards) is not widely supported by SMS messaging clients. This limitation is due to the fact that there is no session identifier or subject-line passed back and forth between sent and received messages in the header data (as specified by SMS protocol) from which the client device can properly thread an incoming message to a specific dialogue, or even to a specific message within a dialogue. Most smart phone text-messaging-clients are able to create some contextual threading of "group messages" which narrows the context of the thread around the common interests shared by
Read more →
Odor source localization

Odor source localization (OSL) is the problem of locating the origin of an airborne or waterborne chemical plume using one or more mobile sensors, typically robots equipped with chemical sensors. The task sits at the intersection of robotics, fluid dynamics and machine olfaction. Chemical plumes in turbulent flows are intermittent and patchy, and most chemical sensors respond slowly and have limited selectivity, so the instantaneous reading available to a moving sensor is a poor proxy for the underlying time-averaged concentration field. Robotic OSL has been studied since the late 1980s and has applications including the detection of gas leaks, search and rescue after industrial accidents, and environmental monitoring of industrial emissions. == History == Robotic odor search emerged in the late 1980s and 1990s, drawing on earlier work in chemical ecology that had described how moths and other insects locate distant pheromone sources. R. A. Russell at Monash University was among the first to build mobile robots that followed chemical trails on the floor and tracked airborne odor plumes. Distributed and multi-robot odor search were investigated by Hayes, Martinoli and Goodman at the California Institute of Technology and EPFL, who studied cooperative plume-tracing on simulated and physical robot swarms. In 2007 Vergassola, Villermaux and Shraiman introduced infotaxis, an information-theoretic search strategy in which a sensor moves so as to maximize the expected information gain about source location, rather than following a chemical concentration gradient; the paper appeared in Nature and prompted substantial follow-up work in the robotics community. From the mid-2010s, multi-rotor unmanned aerial vehicles carrying lightweight chemical sensors became a common experimental platform for OSL research. == Problem formulation == OSL is generally decomposed into three sub-problems: plume detection (deciding whether a chemical signal is present), plume traversal (moving so as to remain in contact with the plume), and source declaration (deciding when the source has been reached). The mathematical difficulty depends strongly on the assumed dispersion model. In laminar or low-Reynolds number flows a Gaussian advection–diffusion model gives a smooth concentration field with a well-defined gradient. In turbulent flows, which dominate most realistic environments, the plume is filamentary: the sensor receives short, randomly spaced bursts of chemical separated by periods of zero signal, and the time-averaged field is not a useful guide on the time scales at which a robot must act. Source-term estimation, surveyed by Hutchinson and colleagues, additionally aims to recover both the position and the release rate of the source from the observed concentrations, often using probabilistic filters. == Biological inspiration == Many OSL strategies are explicitly modeled on the behavior of male moths flying upwind toward a pheromone source. As reviewed by Cardé and Willis, moths combine an upwind surge whenever they detect a filament of pheromone with a wider crosswind cast when contact is lost, producing a characteristic zig-zag trajectory that has been transposed onto mobile robots by several groups. Other biological models draw on the search behavior of dogs and of marine animals such as blue crabs and lobsters, which integrate chemical and bilateral hydrodynamic cues over much shorter ranges. == Algorithms and strategies == === Reactive strategies === Reactive strategies select the next motion as a direct function of the current sensor reading. Chemotaxis steers along the locally estimated concentration gradient, which is effective in laminar plumes but degrades severely in turbulence. Anemotaxis exploits a measured wind direction by surging upwind when chemical contact is made. The bio-inspired cast-and-surge family combines anemotaxis with a deterministic crosswind cast on contact loss, and is the dominant reactive approach for turbulent environments. === Probabilistic and information-theoretic strategies === Probabilistic methods maintain a posterior distribution over possible source locations and choose actions that improve that distribution. The infotaxis strategy of Vergassola, Villermaux and Shraiman selects the move that maximizes the expected reduction in entropy of the source-location posterior, and is effective in regimes where the spatial gradient is unusable. Bayesian source-term estimation extends this idea by inferring both source position and release rate, typically using particle filters or sequential Monte Carlo. === Map-based strategies === Map-based methods build a spatial model of the time-averaged gas distribution from sensor readings collected along the robot's trajectory and search for local maxima in that model. Lilienthal and colleagues describe a family of kernel-based gas distribution mapping techniques in which point measurements are convolved with a Gaussian kernel to produce a spatially extrapolated estimate. Such methods are most useful when the source can be assumed quasi-stationary and the robot is able to revisit locations. === Multi-robot and swarm strategies === Multiple robots searching cooperatively can shorten search times. Cooperative formations spread the sensors across the crosswind axis, making detection of an intermittent plume more likely. Swarm-based approaches, reviewed by Wang and colleagues, deploy larger numbers of simpler agents and rely on collective behavior rather than centralized planning; reported advantages include improved coverage of the search area and the possibility of locating multiple sources in parallel. == Sensors and platforms == Most OSL systems use metal-oxide semiconductor (MOX) sensors, photoionization detectors or electrochemical cells, which trade off sensitivity, selectivity, response time and power consumption. Ishida and colleagues describe how these sensors interact with airflow around the robot body, an effect that motivates careful aerodynamic design and active sampling. Mobile platforms include wheeled ground robots for indoor and structured outdoor environments, multi-rotor unmanned aerial vehicles for open spaces and elevated sources, and autonomous underwater vehicles for chemical plumes in the marine environment. == Notable systems == Among the early demonstrations, R. A. Russell's series of differential-drive robots at Monash University localized volatile sources in still and ventilated rooms during the 1990s. The Smelling Nano Aerial Vehicle reported by Burgués and colleagues used a Crazyflie nano-quadcopter (approximately 27 grams in mass and 10 cm across) carrying a custom MOX gas sensing board, and built three-dimensional gas distribution maps of indoor releases from sweeping flights of less than three minutes. The GADEN simulator, released by Monroy and colleagues, couples three-dimensional dispersion computed from an OpenFOAM CFD solver with models of MOX and photo-ionization gas sensors, and is widely used to test mobile-robot olfaction algorithms in simulation. == Applications == Reported applications include the localization of natural-gas and methane leaks in urban infrastructure, search for chemical contamination after industrial accidents, search and rescue, and environmental monitoring of industrial emissions. Drug- and explosives-detection robots are an adjacent application area, although these typically rely on close-range sniffing rather than long-range plume tracking. == Open challenges == Open challenges identified in recent reviews include the limited speed, selectivity and stability of available chemical sensors; the scarcity of standardized, large-scale benchmarks comparable to those available in computer vision; reliable handling of multi-source environments, where standard single-source assumptions fail; and the integration of OSL with other autonomous-vehicle subsystems such as obstacle avoidance and navigation in three-dimensional turbulent flow.
Read more →