AI Email Body Generator

AI Email Body Generator — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

  • Hybrid machine translation

    Hybrid machine translation

    Hybrid machine translation is a method of machine translation that is characterized by the use of multiple machine translation approaches within a single machine translation system. The motivation for developing hybrid machine translation systems stems from the failure of any single technique to achieve a satisfactory level of accuracy. Many hybrid machine translation systems have been successful in improving the accuracy of the translations, and there are several popular machine translation systems which employ hybrid methods. == Approaches == === Multi-engine === This approach to hybrid machine translation involves running multiple machine translation systems in parallel. The final output is generated by combining the output of all the sub-systems. Most commonly, these systems use statistical and rule-based translation subsystems, but other combinations have been explored. For example, researchers at Carnegie Mellon University have had some success combining example-based, transfer-based, knowledge-based and statistical translation sub-systems into one machine translation system. === Statistical rule generation === This approach involves using statistical data to generate lexical and syntactic rules. The input is then processed with these rules as if it were a rule-based translator. This approach attempts to avoid the difficult and time-consuming task of creating a set of comprehensive, fine-grained linguistic rules by extracting those rules from the training corpus. This approach still suffers from many problems of normal statistical machine translation, namely that the accuracy of the translation will depend heavily on the similarity of the input text to the text of the training corpus. As a result, this technique has had the most success in domain-specific applications, and has the same difficulties with domain adaptation as many statistical machine translation systems. === Multi-Pass === This approach involves serially processing the input multiple times. The most common technique used in multi-pass machine translation systems is to pre-process the input with a rule-based machine translation system. The output of the rule-based pre-processor is passed to a statistical machine translation system, which produces the final output. This technique is used to limit the amount of information a statistical system need consider, significantly reducing the processing power required. It also removes the need for the rule-based system to be a complete translation system for the language, significantly reducing the amount of human effort and labor necessary to build the system. === Confidence-Based === This approach differs from the other hybrid approaches in that in most cases only one translation technology is used. A confidence metric is produced for each translated sentence from which a decision can be made whether to try a secondary translation technology or to proceed with the initial translation output. SMT is also used when common error patterns such as multiple repeat words appear in sequence, as is common with NMT when the attention mechanism is confused.

    Read more →
  • The Visualization Handbook

    The Visualization Handbook

    The Visualization Handbook is a textbook by Charles D. Hansen and Christopher R. Johnson that serves as a survey of the field of scientific visualization by presenting the basic concepts and algorithms in addition to a current review of visualization research topics and tools. It is commonly used as a textbook for scientific visualization graduate courses. It is also commonly cited as a reference for scientific visualization and computer graphics in published papers, with almost 500 citations documented on Google Scholar. == Table of Contents == PART I - Introduction Overview of Visualization - William J. Schroeder and Kenneth M. Martin PART II - Scalar Field Visualization: Isosurfaces Accelerated Isosurface Extraction Approaches -Yarden Livnat Time-Dependent Isosurface Extraction - Han-Wei Shen Optimal Isosurface Extraction - Paolo Cignoni, Claudio Montani, Robert Scopigno, and Enrico Puppo Isosurface Extraction Using Extrema Graphs - Takayuki Itoh and Koji Koyamada Isosurfaces and Level-Sets - Ross Whitaker PART III - Scalar Field Visualization: Volume Rendering Overview of Volume Rendering - Arie E. Kaufman and Klaus Mueller Volume Rendering Using Splatting - Roger Crawfis, Daqing Xue, and Caixia Zhang Multidimensional Transfer Functions for Volume Rendering - Joe Kniss, Gordon Kindlmann, and Charles D. Hansen Pre-Integrated Volume Rendering - Martin Kraus and Thomas Ertl Hardware-Accelerated Volume Rendering - Hanspeter Pfister PART IV - Vector Field Visualization Overview of Flow Visualization - Daniel Weiskopf and Gordon Erlebacher Flow Textures: High-Resolution Flow Visualization - Gordon Erlebacher, Bruno Jobard, and Daniel Weiskopf Detection and Visualization of Vortices - Ming Jiang, Raghu Machiraju, and David Thompson PART V - Tensor Field Visualization Oriented Tensor Reconstruction - Leonid Zhukov and Alan H. Barr Diffusion Tensor MRI Visualization - Song Zhang, David Laidlaw, and Gordon Kindlmann Topological Methods for Flow Visualization - Gerik Scheuermann and Xavier Tricoche PART VI - Geometric Modeling for Visualization 3D Mesh Compression - Jarek Rossignac Variational Modeling Methods for Visualization - Hans Hagen and Ingrid Hotz Model Simplification - Jonathan D. Cohen and Dinesh Manocha PART VII - Virtual Environments for Visualization Direct Manipulation in Virtual Reality - Steve Bryson The Visual Haptic Workbench - Milan Ikits and J. Dean Brederson Virtual Geographic Information Systems - William Ribarsky Visualization Using Virtual Reality - R. Bowen Loftin, Jim X. Chen, and Larry Rosenblum PART VIII - Large-Scale Data Visualization Desktop Delivery: Access to Large Datasets - Philip D. Heermann and Constantine Pavlakos Techniques for Visualizing Time-Varying Volume Data - Kwan-Liu Ma and Eric B. Lum Large-Scale Data Visualization and Rendering: A Problem-Driven Approach - Patrick McCormick and James Ahrens Issues and Architectures in Large-Scale Data Visualization - Constantine Pavlakos and Philip D. Heermann Consuming Network Bandwidth with Visapult - Wes Bethel and John Shalf PART IX - Visualization Software and Frameworks The Visualization Toolkit - William J. Schroeder and Kenneth M. Martin Visualization in the SCIRun Problem-Solving Environment - David M. Weinstein, Steven Parker, Jenny Simpson, Kurt Zimmerman, and Greg M. Jones Numerical Algorithms Group IRIS Explorer - Jeremy Walton AVS and AVS/Express - Jean M. Favre and Mario Valle Vis5D, Cave5D, and VisAD - Bill Hibbard Visualization with AVS - W. T. Hewitt, Nigel W. John, Matthew D. Cooper, K. Yien Kwok, George W. Leaver, Joanna M. Leng, Paul G. Lever, Mary J. McDerby, James S. Perrin, Mark Riding, I. Ari Sadarjoen, Tobias M. Schiebeck, and Colin C. Venters ParaView: An End-User Tool for Large-Data Visualization - James Ahrens, Berk Geveci, and Charles Law The Insight Toolkit: An Open-Source Initiative in Data Segmentation and Registration - Terry S. Yoo amira: A Highly Interactive System for Visual Data Analysis - Detlev Stalling, Malte Westerhoff, and Hans-Christian Hege PART X - Perceptual Issues in Visualization Extending Visualization to Perceptualization: The Importance of Perception in Effective Communication of Information - David S. Ebert Art and Science in Visualization - Victoria Interrante Exploiting Human Visual Perception in Visualization - Alan Chalmers and Kirsten Cater PART XI - Selected Topics and Applications Scalable Network Visualization - Stephen G. Eick Visual Data-Mining Techniques - Daniel A. Keim, Mike Sips, and Mihael Ankerst Visualization in Weather and Climate Research - Don Middleton, Tim Scheitlin, and Bob Wilhelmson Painting and Visualization - Robert M. Kirby, Daniel F. Keefe, and David Laidlaw Visualization and Natural Control Systems for Microscopy - Russell M. Taylor II, David Borland, Frederick P. Brooks, Jr., Mike Falvo, Kevin Jeffay, Gail Jones, David Marshburn, Stergios J. Papadakis, Lu-Chang Qin, Adam Seeger, F. Donelson Smith, Dianne Sonnenwald, Richard Superfine, Sean Washburn, Chris Weigle, Mary Whitton, Leandra Vicci, Martin Guthold, Tom Hudson, Philip Williams, and Warren Robinett Visualization for Computational Accelerator Physics - Kwan-Liu Ma, Greg Schussman, and Brett Wilson

    Read more →
  • Image-based modeling and rendering

    Image-based modeling and rendering

    In computer graphics and computer vision, image-based modeling and rendering (IBMR) methods rely on a set of two-dimensional images of a scene to generate a three-dimensional model and then render some novel views of this scene. The traditional approach of computer graphics has been used to create a geometric model in 3D and try to reproject it onto a two-dimensional image. Computer vision, conversely, is mostly focused on detecting, grouping, and extracting features (edges, faces, etc.) present in a given picture and then trying to interpret them as three-dimensional clues. Image-based modeling and rendering allows the use of multiple two-dimensional images in order to generate directly novel two-dimensional images, skipping the manual modeling stage. == Light modeling == Instead of considering only the physical model of a solid, IBMR methods usually focus more on light modeling. The fundamental concept behind IBMR is the plenoptic illumination function which is a parametrisation of the light field. The plenoptic function describes the light rays contained in a given volume. It can be represented with seven dimensions: a ray is defined by its position ( x , y , z ) {\displaystyle (x,y,z)} , its orientation ( θ , ϕ ) {\displaystyle (\theta ,\phi )} , its wavelength ( λ ) {\displaystyle (\lambda )} and its time ( t ) {\displaystyle (t)} : P ( x , y , z , θ , ϕ , λ , t ) {\displaystyle P(x,y,z,\theta ,\phi ,\lambda ,t)} . IBMR methods try to approximate the plenoptic function to render a novel set of two-dimensional images from another. Given the high dimensionality of this function, practical methods place constraints on the parameters in order to reduce this number (typically to 2 to 4). == IBMR methods and algorithms == View morphing generates a transition between images Panoramic imaging renders panoramas using image mosaics of individual still images Lumigraph relies on a dense sampling of a scene Space carving generates a 3D model based on a photo-consistency check

    Read more →
  • Computer security compromised by hardware failure

    Computer security compromised by hardware failure

    Computer security compromised by hardware failure is a branch of computer security applied to hardware. The objective of computer security includes protection of information and property from theft, corruption, or natural disaster, while allowing the information and property to remain accessible and productive to its intended users. Such secret information could be retrieved by different ways. This article focus on the retrieval of data thanks to misused hardware or hardware failure. Hardware could be misused or exploited to get secret data. This article collects main types of attack that can lead to data theft. Computer security can be compromised by devices, such as keyboards, monitors or printers (thanks to electromagnetic or acoustic emanation for example) or by components of the computer, such as the memory, the network card or the processor (thanks to time or temperature analysis for example). == Devices == === Monitor === The monitor is the main device used to access data on a computer. It has been shown that monitors radiate or reflect data on their environment, potentially giving attackers access to information displayed on the monitor. ==== Electromagnetic emanations ==== Video display units radiate: narrowband harmonics of the digital clock signals; broadband harmonics of the various 'random' digital signals such as the video signal. Known as compromising emanations or TEMPEST radiation, a code word for a U.S. government programme aimed at attacking the problem, the electromagnetic broadcast of data has been a significant concern in sensitive computer applications. Eavesdroppers can reconstruct video screen content from radio frequency emanations. Each (radiated) harmonic of the video signal shows a remarkable resemblance to a broadcast TV signal. It is therefore possible to reconstruct the picture displayed on the video display unit from the radiated emission by means of a normal television receiver. If no preventive measures are taken, eavesdropping on a video display unit is possible at distances up to several hundreds of meters, using only a normal black-and-white TV receiver, a directional antenna and an antenna amplifier. It is even possible to pick up information from some types of video display units at a distance of over 1 kilometer. If more sophisticated receiving and decoding equipment is used, the maximum distance can be much greater. ==== Compromising reflections ==== What is displayed by the monitor is reflected on the environment. The time-varying diffuse reflections of the light emitted by a CRT monitor can be exploited to recover the original monitor image. This is an eavesdropping technique for spying at a distance on data that is displayed on an arbitrary computer screen, including the currently prevalent LCD monitors. The technique exploits reflections of the screen's optical emanations in various objects that one commonly finds close to the screen and uses those reflections to recover the original screen content. Such objects include eyeglasses, tea pots, spoons, plastic bottles, and even the eye of the user. This attack can be successfully mounted to spy on even small fonts using inexpensive, off-the-shelf equipment (less than 1500 dollars) from a distance of up to 10 meters. Relying on more expensive equipment allowed to conduct this attack from over 30 meters away, demonstrating that similar attacks are feasible from the other side of the street or from a close by building. Many objects that may be found at a usual workplace can be exploited to retrieve information on a computer's display by an outsider. Particularly good results were obtained from reflections in a user's eyeglasses or a tea pot located on the desk next to the screen. Reflections that stem from the eye of the user also provide good results. However, eyes are harder to spy on at a distance because they are fast-moving objects and require high exposure times. Using more expensive equipment with lower exposure times helps to remedy this problem. The reflections gathered from curved surfaces on close by objects indeed pose a substantial threat to the confidentiality of data displayed on the screen. Fully invalidating this threat without at the same time hiding the screen from the legitimate user seems difficult, without using curtains on the windows or similar forms of strong optical shielding. Most users, however, will not be aware of this risk and may not be willing to close the curtains on a nice day. The reflection of an object, a computer display, in a curved mirror creates a virtual image that is located behind the reflecting surface. For a flat mirror this virtual image has the same size and is located behind the mirror at the same distance as the original object. For curved mirrors, however, the situation is more complex. === Keyboard === ==== Electromagnetic emanations ==== Computer keyboards are often used to transmit confidential data such as passwords. Since they contain electronic components, keyboards emit electromagnetic waves. These emanations could reveal sensitive information such as keystrokes. Electromagnetic emanations have turned out to constitute a security threat to computer equipment. The figure below presents how a keystroke is retrieved and what material is necessary. The approach is to acquire the raw signal directly from the antenna and to process the entire captured electromagnetic spectrum. Thanks to this method, four different kinds of compromising electromagnetic emanations have been detected, generated by wired and wireless keyboards. These emissions lead to a full or a partial recovery of the keystrokes. The best practical attack fully recovered 95% of the keystrokes of a PS/2 keyboard at a distance up to 20 meters, even through walls. Because each keyboard has a specific fingerprint based on the clock frequency inconsistencies, it can determine the source keyboard of a compromising emanation, even if multiple keyboards from the same model are used at the same time. The four different kinds way of compromising electromagnetic emanations are described below. ===== The Falling Edge Transition Technique ===== When a key is pressed, released or held down, the keyboard sends a packet of information known as a scan code to the computer. The protocol used to transmit these scan codes is a bidirectional serial communication, based on four wires: Vcc (5 volts), ground, data and clock. Clock and data signals are identically generated. Hence, the compromising emanation detected is the combination of both signals. However, the edges of the data and the clock lines are not superposed. Thus, they can be easily separated to obtain independent signals. ===== The Generalized Transition Technique ===== The Falling Edge Transition attack is limited to a partial recovery of the keystrokes. This is a significant limitation. The GTT is a falling edge transition attack improved, which recover almost all keystrokes. Indeed, between two traces, there is exactly one data rising edge. If attackers are able to detect this transition, they can fully recover the keystrokes. ===== The Modulation Technique ===== Harmonics compromising electromagnetic emissions come from unintentional emanations such as radiations emitted by the clock, non-linear elements, crosstalk, ground pollution, etc. Determining theoretically the reasons of these compromising radiations is a very complex task. These harmonics correspond to a carrier of approximately 4 MHz which is very likely the internal clock of the micro-controller inside the keyboard. These harmonics are correlated with both clock and data signals, which describe modulated signals (in amplitude and frequency) and the full state of both clock and data signals. This means that the scan code can be completely recovered from these harmonics. ===== The Matrix Scan Technique ===== Keyboard manufacturers arrange the keys in a matrix. The keyboard controller, often an 8-bit processor, parses columns one-by-one and recovers the state of 8 keys at once. This matrix scan process can be described as 192 keys (some keys may not be used, for instance modern keyboards use 104/105 keys) arranged in 24 columns and 8 rows. These columns are continuously pulsed one-by-one for at least 3μs. Thus, these leads may act as an antenna and generate electromagnetic emanations. If an attacker is able to capture these emanations, he can easily recover the column of the pressed key. Even if this signal does not fully describe the pressed key, it still gives partial information on the transmitted scan code, i.e. the column number. Note that the matrix scan routine loops continuously. When no key is pressed, we still have a signal composed of multiple equidistant peaks. These emanations may be used to remotely detect the presence of powered computers. Concerning wireless keyboards, the wireless data burst transmission can be used as an electromagnetic trigger to detect exactly when a key is pressed, while the matrix s

    Read more →
  • Point distribution model

    Point distribution model

    The point distribution model is a model for representing the mean geometry of a shape and some statistical modes of geometric variation inferred from a training set of shapes. == Background == The point distribution model concept has been developed by Cootes, Taylor et al. and became a standard in computer vision for the statistical study of shape and for segmentation of medical images where shape priors really help interpretation of noisy and low-contrasted pixels/voxels. The latter point leads to active shape models (ASM) and active appearance models (AAM). Point distribution models rely on landmark points. A landmark is an annotating point posed by an anatomist onto a given locus for every shape instance across the training set population. For instance, the same landmark will designate the tip of the index finger in a training set of 2D hands outlines. Principal component analysis (PCA), for instance, is a relevant tool for studying correlations of movement between groups of landmarks among the training set population. Typically, it might detect that all the landmarks located along the same finger move exactly together across the training set examples showing different finger spacing for a flat-posed hands collection. == Details == First, a set of training images are manually landmarked with enough corresponding landmarks to sufficiently approximate the geometry of the original shapes. These landmarks are aligned using the generalized procrustes analysis, which minimizes the least squared error between the points. k {\displaystyle k} aligned landmarks in two dimensions are given as X = ( x 1 , y 1 , … , x k , y k ) {\displaystyle \mathbf {X} =(x_{1},y_{1},\ldots ,x_{k},y_{k})} . It's important to note that each landmark i ∈ { 1 , … k } {\displaystyle i\in \lbrace 1,\ldots k\rbrace } should represent the same anatomical location. For example, landmark #3, ( x 3 , y 3 ) {\displaystyle (x_{3},y_{3})} might represent the tip of the ring finger across all training images. Now the shape outlines are reduced to sequences of k {\displaystyle k} landmarks, so that a given training shape is defined as the vector X ∈ R 2 k {\displaystyle \mathbf {X} \in \mathbb {R} ^{2k}} . Assuming the scattering is gaussian in this space, PCA is used to compute normalized eigenvectors and eigenvalues of the covariance matrix across all training shapes. The matrix of the top d {\displaystyle d} eigenvectors is given as P ∈ R 2 k × d {\displaystyle \mathbf {P} \in \mathbb {R} ^{2k\times d}} , and each eigenvector describes a principal mode of variation along the set. Finally, a linear combination of the eigenvectors is used to define a new shape X ′ {\displaystyle \mathbf {X} '} , mathematically defined as: X ′ = X ¯ + P b {\displaystyle \mathbf {X} '={\overline {\mathbf {X} }}+\mathbf {P} \mathbf {b} } where X ¯ {\displaystyle {\overline {\mathbf {X} }}} is defined as the mean shape across all training images, and b {\displaystyle \mathbf {b} } is a vector of scaling values for each principal component. Therefore, by modifying the variable b {\displaystyle \mathbf {b} } an infinite number of shapes can be defined. To ensure that the new shapes are all within the variation seen in the training set, it is common to only allow each element of b {\displaystyle \mathbf {b} } to be within ± {\displaystyle \pm } 3 standard deviations, where the standard deviation of a given principal component is defined as the square root of its corresponding eigenvalue. PDM's can be extended to any arbitrary number of dimensions, but are typically used in 2D image and 3D volume applications (where each landmark point is R 2 {\displaystyle \mathbb {R} ^{2}} or R 3 {\displaystyle \mathbb {R} ^{3}} ). == Discussion == An eigenvector, interpreted in euclidean space, can be seen as a sequence of k {\displaystyle k} euclidean vectors associated to corresponding landmark and designating a compound move for the whole shape. Global nonlinear variation is usually well handled provided nonlinear variation is kept to a reasonable level. Typically, a twisting nematode worm is used as an example in the teaching of kernel PCA-based methods. Due to the PCA properties: eigenvectors are mutually orthogonal, form a basis of the training set cloud in the shape space, and cross at the 0 in this space, which represents the mean shape. Also, PCA is a traditional way of fitting a closed ellipsoid to a Gaussian cloud of points (whatever their dimension): this suggests the concept of bounded variation. The idea behind PDMs is that eigenvectors can be linearly combined to create an infinity of new shape instances that will 'look like' the one in the training set. The coefficients are bounded alike the values of the corresponding eigenvalues, so as to ensure the generated 2n/3n-dimensional dot will remain into the hyper-ellipsoidal allowed domain—allowable shape domain (ASD).

    Read more →
  • PenTile matrix family

    PenTile matrix family

    PenTile matrix is a family of patented subpixel matrix schemes used in electronic device displays. PenTile is a trademark of Samsung. PenTile matrices are used in AMOLED and LCD displays. These subpixel layouts are specifically designed to operate with proprietary algorithms for subpixel rendering embedded in the display driver, allowing plug and play compatibility with conventional RGB (Red-Green-Blue) stripe panels. == Overview == "PenTile Matrix" (a neologism from penta-, meaning "five" in Greek and tile) describes the geometric layout of the prototypical subpixel arrangement developed in the early 1990s. The layout consists of a quincunx comprising two red subpixels, two green subpixels, and one central blue subpixel in each unit cell. It was inspired by biomimicry of the human retina, which has nearly equal numbers of L and M type cone cells, but significantly fewer S cones. As the S cones are primarily responsible for perceiving blue colors, which do not appreciably affect the perception of luminance, reducing the number of blue subpixels with respect to the red and green subpixels in a display does not reduce the image quality. However, the layout may cause color leakage image distortion, which can be reduced by filters. In some cases the layout causes reduced moiré and blockiness compared to conventional RGB layouts. The PenTile layout is specifically designed to work with and be dependent upon subpixel rendering that uses only one and a quarter subpixel per pixel, on average, to render an image. That is, that any given input pixel is mapped to either a red-centered logical pixel, or a green-centered logical pixel. === History === PenTile was invented by Candice H. Brown Elliott, for which she was awarded the Society for Information Display's Otto Schade Prize in 2014. The technology was licensed by the company Clairvoyante from 2000 until 2008, during which time several prototype PenTile displays were developed by a number of Asian liquid crystal display (LCD) manufacturers. In March 2008, Samsung Electronics acquired Clairvoyante's PenTile IP assets. Samsung then funded a new company, Nouvoyance, Inc. to continue development of the PenTile technology. == PenTile RGBG == PenTile RGBG layout used in AMOLED and plasma displays uses green pixels interleaved with alternating red and blue pixels. The human eye is most sensitive to green, especially for high resolution luminance information. The green subpixels are mapped to input pixels on a one-to-one basis. The red and blue subpixels are subsampled, reconstructing the chroma signal at a lower resolution. The luminance signal is processed using adaptive subpixel rendering filters to optimize reconstruction of high spatial frequencies from the input image, wherein the green subpixels provide the majority of the reconstruction. The red and blue subpixels are capable of reconstructing the horizontal and vertical spatial frequencies, but not the highest of the diagonal. Diagonal high spatial frequency information in the red and blue channels of the input image are transferred to the green subpixels for image reconstruction. Thus the RG-BG scheme creates a color display with one third fewer subpixels than a traditional RGB-RGB scheme but with the same measured luminance display resolution. This is similar to the Bayer filter commonly used in digital cameras. === Devices === As of 2021, "almost all" OLED screens in portable consumer devices use some form of Pentile subpixel layout. == PenTile RGBW == PenTile RGBW technology, used in LCD, adds an extra subpixel to the traditional red, green and blue subpixels that is a clear area without color filtering material and with the only purpose of letting backlight come through, hence W for white. This makes it possible to produce a brighter image compared to an RGB-matrix while using the same amount of power, or produce an equally bright image while using less power. The PenTile RGBW layout uses each red, green, blue and white subpixel to present high-resolution luminance information to the human eyes' red-sensing and green-sensing cone cells, while using the combined effect of all the color subpixels to present lower-resolution chroma (color) information to all three cone cell types. Combined, this optimizes the match of display technology to the biological mechanisms of human vision. The layout uses one third fewer subpixels for the same resolution as the RGB stripe (RGB-RGB) layout, in spite of having four color primaries instead of the conventional three, using subpixel rendering combined with metamer rendering. Metamer rendering optimizes the energy distribution between the white subpixel and the combined red, green, and blue subpixels: W <> RGB, to improve image sharpness. The display driver chip has an RGB to RGBW color vector space converter and gamut mapping algorithm, followed by metamer and subpixel rendering algorithms. In order to maintain saturated color quality, to avoid simultaneous contrast error between saturated colors and peak white brightness, while simultaneously reducing backlight power requirements, the display backlight brightness is under control of the PenTile driver engine. When the image is mostly desaturated colors, those near white or grey, the backlight brightness is significantly reduced, often to less than 50% peak, while the LCD levels are increased to compensate. When the image has very bright saturated colors, the backlight brightness is maintained at higher levels. The PenTile RGBW also has an optional high-brightness mode that doubles the brightness of the desaturated color image areas, such as black-and-white text, for improved outdoor viewability. === Devices === Motorola MC65 Motorola ES55 Motorola ES400 Motorola Atrix 4G Samsung Galaxy Note 10.1 2014 version Lenovo Yoga 2 Pro Lenovo Yoga 3 Pro HP ENVY TouchSmart 14-k022tx Sleekbook MSI GS60 Ghost Pro 4K Lenovo IdeaPad Y50 4K Asus ZenBook UX303LN 4K Asus ZenBook Pro UX501JW LG UH7500/6500/6100 LG ThinQ G7/G7+ Oculus Quest 1 == Controversy == An ongoing controversy regarding the definition or measurement of resolution of color subpixelated flat panel displays led many people to question the resolution claims of PenTile display products. Journalists have noted that in "just about every flat-panel TV in existence, each pixel is composed of one red, one green, and one blue subpixel (RGB), all of uniform size". In traditional flat-panel screens, the resolution is defined by the number of red, green, and blue subpixels, in groups of three, in an array in each axis. As a result, each pixel or group of subpixels can render any colour on the screen, regardless of neighbouring pixels. This is not the case with PenTile screens. The Video Electronics Standards Association (VESA) method of measuring and defining resolution in color displays is to measure the contrast of line pairs, requiring a minimum of 50% Michelson contrast for displays intended for rendering text. The developers of PenTile displays use this VESA criterion for contrast of line pairs to calculate the resolutions specified. In the RGBG layout the alternate red and blue subpixels are 'shared' or sub-sampled with neighboring pixels. Due to the one third lower subpixel density on PenTile displays the pixel structure may be more visible when compared to RGB stripe displays with the same pixel density. The loss of subpixels for a given resolution specification has led some journalists to describe the use of PenTile as "shady practice" and "sort of cheating". For a given size and resolution specification, the PenTile screen can appear grainy, pixelated, speckled, with blurred text on some saturated colors and backgrounds when compared to RGB stripe color. This effect is understood to be caused by the restriction of the number of subpixels that may participate in the image reconstruction when colors are highly saturated to primaries. In the RGBW case, this is caused as the W subpixel will not be available in order to maintain the saturated color. In the RGBG case, this effect will occur when the color boundary is primarily red or blue, as the fully populated (one green per pixel) sub-pixel cannot contribute. For all other cases, text and especially full color images are effectively reconstructed. == Advantages and disadvantages == The PenTile layout reduces the number of subpixels needed to create a specified resolution. Consequently it is possible to achieve an HD resolution on a PenTile AMOLED screen at lower cost than other technologies, and most reviewers note that "300 ppi" (as per VESA - not full pixels) resolution displays (such as Samsung Galaxy S III) make the PenTile effect less obvious than lower resolution PenTile displays (Droid Razr). The second advantage is lower power consumption: the HTC One S's use of a PenTile display makes it more energy efficient and thinner than equivalent LCD screens, giving it better battery life than the HTC One X's IPS LCD. A PenTile AMOLED screen is also

    Read more →
  • Identity column

    Identity column

    An identity column is a column (also known as a field) in a database table that is made up of values generated by the database. This is much like an AutoNumber field in Microsoft Access or a sequence in Oracle. Because the concept is so important in database science, many RDBMS systems implement some type of generated key, although each has its own terminology. Today a popular technique for generating identity is to generate a random UUID. An identity column differs from a primary key in that its values are managed by the server and usually cannot be modified. In many cases an identity column is used as a primary key; however, this is not always the case. It is a common misconception that an identity column will enforce uniqueness; however, this is not the case. If you want to enforce uniqueness on the column you must include the appropriate constraint too. In Microsoft SQL Server you have options for both the seed (starting value) and the increment. By default the seed and increment are both 1. == Code samples == or In PostgreSQL == Related functions == It is often useful or necessary to know what identity value was generated by an INSERT command. Microsoft SQL Server provides several functions to do this: @@IDENTITY provides the last value generated on the current connection in the current scope, while IDENT_CURRENT(tablename) provides the last value generated, regardless of the connection or scope it was created on. Example:

    Read more →
  • Integrated test facility

    Integrated test facility

    An integrated test facility (ITF) creates a fictitious entity in a database to process test transactions simultaneously with live input. ITF can be used to incorporate test transactions into a normal production run of a system. Its advantage is that periodic testing does not require separate test processes. However, careful planning is necessary, and test data must be isolated from production data. Moreover, ITF validates the correct operation of a transaction in an application, but it does not ensure that a system is being operated correctly. Integrated test facility is considered a useful audit tool during an IT audit because it uses the same programs to compare processing using independently calculated data. This involves setting up dummy entities on an application system and processing test or production data against the entity as a means of verifying processing accuracy.

    Read more →
  • Belief–desire–intention model

    Belief–desire–intention model

    For popular psychology, the belief–desire–intention (BDI) model of human practical reasoning was developed by Michael Bratman as a way of explaining future-directed intention. BDI is fundamentally reliant on folk psychology (the 'theory theory'), which is the notion that our mental models of the world are theories. It was used as a basis for developing the belief–desire–intention software model. == Applications == BDI was part of the inspiration behind the BDI software architecture, which Bratman was also involved in developing. Here, the notion of intention was seen as a way of limiting time spent on deliberating about what to do, by eliminating choices inconsistent with current intentions. BDI has also aroused some interest in psychology. BDI formed the basis for a computational model of childlike reasoning CRIBB.

    Read more →
  • DUAL table

    DUAL table

    The DUAL table is a special one-row, one-column table present by default in Oracle and other database installations. In Oracle, the table has a single VARCHAR2(1) column called DUMMY that has a value of 'X'. It is suitable for use in selecting a pseudo column such as SYSDATE or USER. == Example use == Oracle's SQL syntax requires the FROM clause but some queries don't require any tables - DUAL can be used in these cases. == History == Charles Weiss explains why he created DUAL: I created the DUAL table as an underlying object in the Oracle Data Dictionary. It was never meant to be seen itself, but instead used inside a view that was expected to be queried. The idea was that you could do a JOIN to the DUAL table and create two rows in the result for every one row in your table. Then, by using GROUP BY, the resulting join could be summarized to show the amount of storage for the DATA extent and for the INDEX extent(s). The name, DUAL, seemed apt for the process of creating a pair of rows from just one. == Optimization == Beginning with 10g Release 1, Oracle no longer performs physical or logical I/O on the DUAL table, though the table still exists. DUAL is readily available for all authorized users in a SQL database. == In other database systems == Several other databases (including Microsoft SQL Server, MySQL, PostgreSQL, SQLite, and Teradata) enable one to omit the FROM clause entirely if no table is needed. This avoids the need for any dummy table. ClickHouse has a one-row system table system.one with a single column named "dummy" of type UInt8 and value 0. This table is implicitly used when no table is specified in the SELECT query. Firebird has a one-row system table RDB$DATABASE that is used in the same way as Oracle's DUAL, although it also has a meaning of its own. IBM Db2 has a view that resolves DUAL when using Oracle Compatibility. It also has a table called sysibm.sysdummy1 that has similar properties to the Oracle DUAL one. Informix: Informix version 11.50 and later has a table named sysmaster:"informix".sysdual with the same functionality but a more verbose name. You can use CREATE PUBLIC SYNONYM dual FOR sysmaster:"informix".sysdual to create a name dual in the current database with the same functionality. Microsoft Access: A table named DUAL may be created and the single-row constraint enforced via ADO (Table-less UNION query in MS Access) Microsoft SQL Server: SQL Server does not require a dummy table. Queries like 'select 1 + 1' can be run without a "from" clause/table name. MySQL allows DUAL to be specified as a table in queries that do not need data from any tables. It is suitable for use in selecting a result function such as SYSDATE() or USER(), although it is not essential. PostgreSQL: A DUAL-view can be added to ease porting from Oracle. Snowflake: DUAL is supported, but not explicitly documented. It appears in sample SQL for other operations in the documentation. SQLite: A VIEW named "dual" that works the same as the Oracle "dual" table can be created as follows: CREATE VIEW dual AS SELECT 'x' AS dummy; SAP HANA has a table called DUMMY that works the same as the Oracle "dual" table. Teradata database does not require a dummy table. Queries like 'select 1 + 1' can be run without a "from" clause/table name. Vertica has support for a DUAL table in their official documentation.

    Read more →
  • Imieliński–Lipski algebra

    Imieliński–Lipski algebra

    In database theory, Imieliński–Lipski algebra is an extension of relational algebra onto tables with different types of null values. It is used to operate on relations with incomplete information. Imieliński–Lipski algebras are defined to satisfy precise conditions for semantically meaningful extension of the usual relational operators, such as projection, selection, union, and join, from operators on relations to operators on relations with various kinds of "null values". These conditions require that the system be safe in the sense that no incorrect conclusion is derivable by using a specified subset F of the relational operators; and that it be complete in the sense that all valid conclusions expressible by relational expressions using operators in F are in fact derivable in this system. For example, it is well known that the three-valued logic approach to deal with null values, supported treatment of nulls values by SQL is not complete, see Ullman book. To show this, let T be: Take SQL query Q SQL query Q will return empty set (no results) under 3-valued semantics currently adopted by all variants of SQL. This is the case because in SQL, NULL is never equal to any constant – in this case, neither to “Spring” nor “Fall” nor “Winter” (if there is Winter semester in this school). NULL='Spring' will evaluate to MAYBE and so will NULL='Fall'. The disjunction MAYBE OR MAYBE evaluates to MAYBE (not TRUE). Thus Igor will not be part of the answer (and of course neither will Rohit). But Igor should be returned as the answer. Indeed, regardless what semester Igor took the Networks class (no matter what was the unknown value of NULL), the selection condition will be true. This “Igor” will be missed by SQL and the SQL answer would be incomplete according to completeness requirements specified in Tomasz Imieliński, Witold Lipski, 'Incomplete Information in Relational Databases'. It is also argued there that 3-valued logic (TRUE, FALSE, MAYBE) can never provide guarantee of complete answer for tables with incomplete information. Three algebras which satisfy conditions of safety and completeness are defined as Imielinski–Lipski algebras: the Codd-Tables algebra, the V-tables algebra and the Conditional tables (C-tables) algebra. == Codd-tables algebra == Codd-tables algebra is based on the usual Codd's single NULL values. The table T above is an example of Codd-table. Codd-table algebra supports projection and positive selections only. It is also demonstrated in [IL84 that it is not possible to correctly extend more relational operators over Codd-Tables. For example, such basic operation as join is not extendable over Codd-tables. It is not possible to define selections with Boolean conditions involving negation and preserve completeness. For example, queries like the above query Q cannot be supported. In order to be able to extend more relational operators, more expressive form of null value representation is needed in tables which are called V-table. == V-tables algebra == V-tables algebra is based on many different ("marked") null values or variables allowed to appear in a table. V-tables allow to show that a value may be unknown but the same for different tuples. For example, in the table below Gaurav and Igor order the same (but unknown) beer in two unknown bars (which may, or may not be different – but remain unknown). Gaurav and Jane frequent the same unknown bar (Y1). Thus, instead one NULL value, we use indexed variables, or Skolem constants . V-tables algebra is shown to correctly support projection, positive selection (with no negation occurring in the selection condition), union, and renaming of attributes, which allows for processing arbitrary conjunctive queries. A very desirable property enjoyed by the V-table algebra is that all relational operators on tables are performed in exactly the same way as in the case of the usual relations. === Conditional tables (c-tables) algebra === Example of conditional table (c-table) is shown below. It has additional column “con” which is a Boolean condition involving variables, null values – same as in V-tables. over the following table c-table Conditional tables algebra, mainly of theoretical interest, supports projection, selection, union, join, and renaming. Under closed-world assumption, it can also handle the operator of difference, thus it can support all relational operators. == History == Imieliński–Lipski algebras were introduced by Tomasz Imieliński and Witold Lipski Jr. in Incomplete Information in Relational Databases.

    Read more →
  • Digital Michelangelo Project

    Digital Michelangelo Project

    The Digital Michelangelo Project was a pioneering initiative undertaken during the 1998–1999 academic year to digitize the sculptures and architecture of Michelangelo using advanced laser scanning technology. The project was led by a team of 30 faculty, staff, and students from Stanford University and the University of Washington, with the aim of creating high-resolution 3D models of Michelangelo's works for scholarly, educational, and preservation purposes. == Objectives == The primary goals of the Digital Michelangelo Project were: To apply recent advancements in laser rangefinder technology for digitizing large cultural artifacts. To create detailed digital archives of Michelangelo's sculptures and architectural spaces for future study and analysis. To explore potential educational and curatorial applications for 3D scanned data. === Artworks digitized === The project involved scanning several iconic works by Michelangelo, including: David The Unfinished Slaves (Atlas, Awakening, Bearded, and Youthful) St. Matthew The allegorical statues from the Medici tombs (Night, Day, Dawn, and Dusk) The architectural interiors of the Tribuna del David at the Galleria dell'Accademia and the New Sacristy in the Medici Chapels. == Technology and methodology == === 3D scanning === The project's primary scanner was a laser triangulation rangefinder mounted on a motorized gantry, custom-built by Cyberware Inc. The scanner used a laser sheet to project onto an object, capturing its shape through triangulation. Multiple scans were taken from various angles and combined into a single, detailed 3D mesh. The resolution achieved was fine enough to capture even Michelangelo's chisel marks, with triangles approximately 0.25 mm on each side. In addition to shape data, color data was captured using a spotlight and a secondary camera, enabling the creation of textured 3D models. === Data processing === The project developed a software suite for processing the scanned data. This included: Aligning and merging multiple scans into a seamless 3D model. Filling holes in the geometry caused by inaccessible areas. Correcting color data for lighting inconsistencies and shadowing. Non-photorealistic rendering techniques were also applied, highlighting surface features such as Michelangelo’s chisel marks for enhanced visualization. == Logistical challenges == The scale and complexity of the project presented several challenges: Data size: The dataset for David alone comprised 2 billion polygons and 7,000 color images, occupying 60 GB of storage. Artifact safety: Ensuring the safety of the statues during scanning required extensive crew training, foam-encased equipment, and collision-prevention mechanisms. == Applications and impact == The digitized models have numerous potential applications: Art history: Allowing precise measurements and geometric analysis, such as determining chisel types or evaluating structural balance. Education: Providing new ways to study art, including interactive viewing from unconventional angles and with custom lighting. Museum curation: Enhancing visitor experiences through interactive kiosks and virtual models. The project demonstrated the potential for 3D technology to preserve and disseminate cultural heritage. == Data distribution == The project's models are available through Stanford University for scholarly purposes, under strict licensing due to Italian intellectual property laws. === ScanView === To provide public access to the 3D models while respecting usage restrictions, the project developed ScanView, a client/server rendering system. ScanView allows users to view and interact with high-resolution 3D models without downloading the data. The client component consists of a freely available viewer program and simplified 3D models. Users can navigate these models locally, adjusting position, orientation, lighting, and surface appearance. When a user finalizes a view, the client queries a remote server for a high-resolution rendering of the model, which is sent back to overwrite the simplified version on the user’s screen. A typical query-response cycle takes 1–2 seconds, depending on network conditions. To protect the models from unauthorized reconstruction, the system employs several security measures, including: Encrypting queries Perturbing viewpoint and lighting parameters Adding noise and warping rendered images Compressing images before transmission ScanView operates on Windows-based PCs and provides access to selected models, including David and St. Matthew, as well as other artifacts such as fragments of the Forma Urbis Romae and items from the Stanford 3D Scanning Repository. == Sponsors == The Digital Michelangelo Project was supported by Stanford University, Interval Research Corporation, and the Paul G. Allen Foundation for the Arts.

    Read more →
  • Wadhwani Institute for Artificial Intelligence

    Wadhwani Institute for Artificial Intelligence

    Wadhwani AI, based in Mumbai, Maharashtra, is an independent, non-profit institute. Founded in 2018, it is dedicated to developing Artificial intelligence solutions for social good. Their mission is to build AI-based innovations and solutions for underserved communities in developing countries, for a wide range of domains including agriculture, education, financial inclusion, healthcare, and infrastructure. == History and funding == The institute was founded with a $30 million philanthropic effort by the Wadhwani brothers, Romesh Wadhwani and Sunil Wadhwani. The institute was inaugurated and dedicated to the nation by Narendra Modi, the 14th Prime Minister of India. In 2019, the institute received a $2 million grant from Google.org to create technologies to help reduce crop losses in cotton farming, through integrated pest management. The United States Agency for International Development awarded $2 million to the institute in 2020 to develop tools, using mathematical modeling techniques and digital technologies such as artificial intelligence and machine learning, to forecast COVID-19 disease patterns, estimate resources needed, and plan interventions. == Collaboration == With assistance from Google, the Ministry of Agriculture and Farmers' Welfare and the Wadhwani AI developed Krishi 24/7, the first AI-powered automated agricultural news monitoring and analysis tool. Through better decision-making, Krishi 24/7 will support the identification of valuable news, provide timely notifications, and respond quickly to safeguard farmers' interests and advance sustainable agricultural growth. The application converts news articles into English after scanning them in several languages. It ensures that the ministry is informed in a timely manner about pertinent occurrences that are published online by extracting key information from news items, including the headline, crop name, event type, date, location, severity, summary, and source link. The National Center for Disease Control has effectively implemented a comparable automated surveillance and analysis tool for disease outbreaks.

    Read more →
  • Image

    Image

    An image or picture is a visual representation. An image can be two-dimensional, such as a drawing, painting, or photograph, or three-dimensional, such as a carving or sculpture. Images may be displayed through other media, including a projection on a surface, activation of electronic signals, or digital displays; they can also be reproduced through mechanical means, such as photography, printmaking, or photocopying. Images can also be animated through digital or physical processes. In the context of signal processing, an image is a distributed amplitude of color(s). In optics, the term image (or optical image) refers specifically to the reproduction of an object formed by light waves coming from the object. A volatile image exists or is perceived only for a short period. This may be a reflection of an object by a mirror, a projection of a camera obscura, or a scene displayed on a cathode-ray tube. A fixed image, also called a hard copy, is one that has been recorded on a material object, such as paper or textile. A mental image exists in an individual's mind as something one remembers or imagines. The subject of an image does not need to be real; it may be an abstract concept such as a graph or function or an imaginary entity. For a mental image to be understood outside of an individual's mind, however, there must be a way of conveying that mental image through the words or visual productions of the subject. == Characteristics == === Two-dimensional images === The broader sense of the word 'image' also encompasses any two-dimensional figure, such as a map, graph, pie chart, painting, or banner. In this wider sense, images can also be rendered manually, such as by drawing, the art of painting, or the graphic arts (such as lithography or etching). Additionally, images can be rendered automatically through printing, computer graphics technology, or a combination of both methods. A two-dimensional image does not need to use the entire visual system to be a visual representation. An example of this is a grayscale ("black and white") image, which uses the visual system's sensitivity to brightness across all wavelengths without taking into account different colors. A black-and-white visual representation of something is still an image, even though it does not fully use the visual system's capabilities. On the other hand, some processes can be used to create visual representations of objects that are otherwise inaccessible to the human visual system. These include microscopy for the magnification of minute objects, telescopes that can observe objects at great distances, X-rays that can visually represent the interior structures of the human body (among other objects), magnetic resonance imaging (MRI), positron emission tomography (PET scans), and others. Such processes often rely on detecting electromagnetic radiation that occurs beyond the light spectrum visible to the human eye and converting such signals into recognizable images. === Three-dimensional images === Aside from sculpture and other physical activities that can create three-dimensional images from solid material, some modern techniques, such as holography, can create three-dimensional images that are reproducible but intangible to human touch. Some photographic processes can now render the illusion of depth in an otherwise "flat" image, but "3-D photography" (stereoscopy) or "3-D film" are optical illusions that require special devices such as eyeglasses to create the illusion of depth. === Moving images === "Moving" two-dimensional images are actually illusions of movement perceived when still images are displayed in sequence, each image lasting less, and sometimes much less, than a fraction of a second. The traditional standard for the display of individual frames by a motion picture projector has been 24 frames per second (FPS) since at least the commercial introduction of "talking pictures" in the late 1920s, which necessitated a standard for synchronizing images and sounds. Even in electronic formats such as television and digital image displays, the apparent "motion" is actually the result of many individual lines giving the impression of continuous movement. This phenomenon has often been described as "persistence of vision": a physiological effect of light impressions remaining on the retina of the eye for very brief periods. Even though the term is still sometimes used in popular discussions of movies, it is not a scientifically valid explanation. Other terms emphasize the complex cognitive operations of the brain and the human visual system. "Flicker fusion", the "phi phenomenon", and "beta movement" are among the terms that have replaced "persistence of vision", though no one term seems adequate to describe the process. == Cultural and other uses == Image-making seems to have been common to virtually all human cultures since at least the Paleolithic era. Prehistoric examples of rock art—including cave paintings, petroglyphs, rock reliefs, and geoglyphs—have been found on every inhabited continent. Many of these images seem to have served various purposes: as a form of record-keeping; as an element of spiritual, religious, or magical practice; or even as a form of communication. Early writing systems, including hieroglyphics, ideographic writing, and even the Roman alphabet, owe their origins in some respects to pictorial representations. === Meaning and signification === Images of any type may convey different meanings and sensations for individual viewers, regardless of whether the image's creator intended them. An image may be taken simply as a more or less "accurate" copy of a person, place, thing, or event. It may represent an abstract concept, such as the political power of a ruler or ruling class, a practical or moral lesson, an object for spiritual or religious veneration, or an object—human or otherwise—to be desired. It may also be regarded for its purely aesthetic qualities, rarity, or monetary value. Such reactions can depend on the viewer's context. A religious image in a church may be regarded differently than the same image mounted in a museum. Some might view it simply as an object to be bought or sold. Viewers' reactions will also be guided or shaped by their education, class, race, and other contexts. The study of emotional sensations and their relationship to any given image falls into the categories of aesthetics and the philosophy of art. While such studies inevitably deal with issues of meaning, another approach to signification was suggested by the American philosopher, logician, and semiotician Charles Sanders Peirce. "Images" are one type of the broad category of "signs" proposed by Peirce. Although his ideas are complex and have changed over time, the three categories of signs that he distinguished stand out: The "icon," which relates to an object by resemblance to some quality of the object. A painted or photographed portrait is an icon by virtue of its resemblance to the painting's or photograph's subject. A more abstract representation, such as a map or diagram, can also be an icon. The "index," which relates to an object by some real connection. For example, smoke may be an index of fire, or the temperature recorded on a thermometer may be an index of a patient's illness or health. The "symbol," which lacks direct resemblance or connection to an object but whose association is arbitrarily assigned by the creator or dictated by cultural and historical habit, convention, etc. The color red, for example, may connote rage, beauty, prosperity, political affiliation, or other meanings within a given culture or context; the Swedish film director Ingmar Bergman claimed that his use of the color in his 1972 film Cries and Whispers came from his personal visualization of the human soul. A single image may exist in all three categories at the same time. The Statue of Liberty provides an example. While there have been countless two-dimensional and three-dimensional "reproductions" of the statue (i.e., "icons" themselves), the statue itself exists as an "icon" by virtue of its resemblance to a human woman (or, more specifically, previous representations of the Roman goddess Libertas or the female model used by the artist Frederic-Auguste Bartholdi). an "index" representing New York City or the United States of America in general due to its placement in New York Harbor, or with "immigration" from its proximity to the immigration center at Ellis Island. a "symbol" as a visualization of the abstract concept of "liberty" or "freedom" or even "opportunity" or "diversity". === Critiques of imagery === The nature of images, whether three-dimensional or two-dimensional, created for a specific purpose or only for aesthetic pleasure, has continued to provoke questions and even condemnation at different times and places. In his dialogue, The Republic, the Greek philosopher Plato described our apparent reality as a copy of a higher order of universal forms.

    Read more →
  • National Parking Platform

    National Parking Platform

    The National Parking Platform is a digital platform in the United Kingdom providing interoperability between car park operators, parking apps, and other service providers. It enables all parking apps that support the system: RingGo, JustPark, PayByPhone, Apcoa Connect, AppyParking, and Caura to work at all participating car parks. It has been rolled out in 13 local authorities so far. It was first developed by the Department for Transport starting in 2019, and since May 2025 is controlled by the British Parking Association on a not-for-profit basis. == Participating local authorities == Buckinghamshire Cheshire West and Chester Coventry City East Hertfordshire East Suffolk Liverpool City Manchester City Oxfordshire County Peterborough City Stevenage Sutton Walsall Welwyn Hatfield

    Read more →