AI Email Corrector

AI Email Corrector — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

• 

  Grokking (machine learning)

  In machine learning, grokking, or delayed generalization, is a phenomenon observed in some settings where a model abruptly transitions from overfitting (performing well only on training data) to generalizing (performing well on both training and test data), after many training iterations with little or no improvement on the held-out data. This contrasts with what is typically observed in machine learning, where generalization occurs gradually alongside improved performance on training data. == Origin == Grokking was introduced by OpenAI researcher Alethea Power and colleagues in the January 2022 paper "Grokking: Generalization Beyond Overfitting on Small Algorithmic Datasets". It is derived from the word grok coined by Robert Heinlein in his novel Stranger in a Strange Land. In ML research, "grokking" is not used as a synonym for "generalization"; rather, it names a sometimes-observed delayed‑generalization training phenomenon in which training and held‑out performance do not improve in tandem, and in which held‑out performance rises abruptly later. Authors also analyze the "grokking time", the epoch or step at which this transition occurs in those scenarios. == Interpretations == Grokking can be understood as a phase transition during the training process. In particular, recent work has shown that grokking may be due to a complexity phase transition in the model during training. While grokking has been thought of as largely a phenomenon of relatively shallow models, grokking has been observed in deep neural networks and non-neural models and is the subject of active research. One potential explanation is that the weight decay (a component of the loss function that penalizes higher values of the neural network parameters, also called regularization) slightly favors the general solution that involves lower weight values, but that is also harder to find. According to Neel Nanda, the process of learning the general solution may be gradual, even though the transition to the general solution occurs more suddenly later. Recent theories have hypothesized that grokking occurs when neural networks transition from a "lazy training" regime where the weights do not deviate far from initialization, to a "rich" regime where weights abruptly begin to move in task-relevant directions. Follow-up empirical and theoretical work has accumulated evidence in support of this perspective, and it offers a unifying view of earlier work as the transition from lazy to rich training dynamics is known to arise from properties of adaptive optimizers, weight decay, initial parameter weight norm, and more. This perspective is complementary to a unifying "pattern learning speeds" framework that links grokking and double descent; within this view, delayed generalization can arise across training time ("epoch‑wise") or across model size ("model‑wise"), and the authors report "model‑wise grokking".

  Read more →
• 

  Randomized benchmarking

  Randomized benchmarking is an experimental method for measuring the average error rates of quantum computing hardware platforms. The protocol estimates the average error rates by implementing long sequences of randomly sampled quantum gate operations. Randomized benchmarking is the industry-standard protocol used by quantum hardware developers such as IBM and Google to test the performance of the quantum operations. The original theory of randomized benchmarking, proposed by Joseph Emerson and collaborators, considered the implementation of sequences of Haar-random operations, but this had several practical limitations. The now-standard protocol for randomized benchmarking (RB) relies on uniformly random Clifford operations, as proposed in 2006 by Dankert et al. as an application of the theory of unitary t-designs. In current usage randomized benchmarking sometimes refers to the broader family of generalizations of the 2005 protocol involving different random gate sets that can identify various features of the strength and type of errors affecting the elementary quantum gate operations. Randomized benchmarking protocols are an important means of verifying and validating quantum operations and are also routinely used for the optimization of quantum control procedures. == Overview == Randomized benchmarking offers several key advantages over alternative approaches to error characterization. For example, the number of experimental procedures required for full characterization of errors (called tomography) grows exponentially with the number of quantum bits (called qubits). This makes tomographic methods impractical for even small systems of just 3 or 4 qubits. In contrast, randomized benchmarking protocols are the only known approaches to error characterization that scale efficiently as number of qubits in the system increases. Thus RB can be applied in practice to characterize errors in arbitrarily large quantum processors. Additionally, in experimental quantum computing, procedures for state preparation and measurement (SPAM) are also error-prone, and thus quantum process tomography is unable to distinguish errors associated with gate operations from errors associated with SPAM. In contrast, RB protocols are robust to state-preparation and measurement errors Randomized benchmarking protocols estimate key features of the errors that affect a set of quantum operations by examining how the observed fidelity of the final quantum state decreases as the length of the random sequence increases. If the set of operations satisfies certain mathematical properties, such as comprising a sequence of twirls with unitary two-designs, then the measured decay can be shown to be an invariant exponential with a rate fixed uniquely by features of the error model. == History == Randomized benchmarking was proposed in Scalable noise estimation with random unitary operators, where it was shown that long sequences of quantum gates sampled uniformly at random from the Haar measure on the group SU(d) would lead to an exponential decay at a rate that was uniquely fixed by the error model. Emerson, Alicki and Zyczkowski also showed, under the assumption of gate-independent errors, that the measured decay rate is directly related to an important figure of merit, the average gate fidelity and independent of the choice of initial state and any errors in the initial state, as well as the specific random sequences of quantum gates. This protocol applied for arbitrary dimension d and an arbitrary number n of qubits, where d=2n. The SU(d) RB protocol had two important limitations that were overcome in a modified protocol proposed by Dankert et al., who proposed sampling the gate operations uniformly at random from any unitary two-design, such as the Clifford group. They proved that this would produce the same exponential decay rate as the random SU(d) version of the protocol proposed in Emerson et al.. This follows from the observation that a random sequence of gates is equivalent to an independent sequence of twirls under that group, as conjectured in and later proven in. This Clifford-group approach to Randomized Benchmarking is the now standard method for assessing error rates in quantum computers. A variation of this protocol was proposed by NIST in 2008 for the first experimental implementation of an RB-type for single qubit gates. However, the sampling of random gates in the NIST protocol was later proven not to reproduce any unitary two-design. The NIST RB protocol was later shown to also produce an exponential fidelity decay, albeit with a rate that depends on non-invariant features of the error model In recent years a rigorous theoretical framework has been developed for Clifford-group RB protocols to show that they work reliably under very broad experimental conditions. In 2011 and 2012, Magesan et al. proved that the exponential decay rate is fully robust to arbitrary state preparation and measurement errors (SPAM). They also proved a connection between the average gate fidelity and diamond norm metric of error that is relevant to the fault-tolerant threshold. They also provided evidence that the observed decay was exponential and related to the average gate fidelity even if the error model varied across the gate operations, so-called gate-dependent errors, which is the experimentally realistic situation. In 2018, Wallman and Dugas et al., showed that, despite concerns raised in, even under very strong gate-dependence errors the standard RB protocols produces an exponential decay at a rate that precisely measures the average gate-fidelity of the experimentally relevant errors. The results of Wallman. in particular proved that the RB error rate is so robust to gate-dependent errors models that it provides an extremely sensitive tool for detecting non-Markovian errors. This follows because under a standard RB experiment only non-Markovian errors (including time-dependent Markovian errors) can produce a statistically significant deviation from an exponential decay The standard RB protocol was first implemented for single qubit gate operations in 2012 at Yale on a superconducting qubit. A variation of this standard protocol that is only defined for single qubit operations was implemented by NIST in 2008 on a trapped ion. The first implementation of the standard RB protocol for two-qubit gates was performed in 2012 at NIST for a system of two trapped ions

  Read more →
• 

  Awwwards

  Awwwards (Awwwards Online SL) is an organization that hosts web design competitions and conferences across Europe and the United States. Website owners and developers can participate by submitting their websites for review. Submissions are assessed by a jury, and top entries are presented and awarded prizes on a rotational basis. == Nomination process == Web designers submit their websites through Awwwards' platform for consideration for the Site of the Day. A jury, composed of industry professionals, and the Awwwards community evaluate the entries. The best daily sites are published annually in "The 365 Best Websites Around the World" book. == Jury == The jury consists of international designers, developers, and agencies who assess the creativity, technical skills, and insight of the submitted web projects. The panel's expertise ensures a comprehensive review process. === Developer Award === Awwwards, in partnership with Microsoft, created the Developer Award to recognize web developers who demonstrate excellence in creating websites that meet modern standards. The award highlights websites that work seamlessly across various platforms and devices, using best practices in HTML5, JavaScript, and CSS. == Annual winners == Some prominent Site of the Year winners include Mercedes-Benz, Bloomberg L.P., Bose Corporation, Warner Brothers, Volkswagen, Uber, and Google. == Awwwards conference == Awwwards also organizes two-day conferences featuring speakers from major tech companies and industry leaders such as Microsoft, Google, Spotify, Adobe, Opera, and Smashing Magazine. These events focus on the latest trends in web design and development. Speakers at Awwwards conferences have included notable figures in the design and technology industry such as Stefan Sagmeister, Paula Scher, and design leaders from companies including Wix. == Corporate affairs == === Platform === Awwwards operates an online platform where web designers and developers submit websites for evaluation and awards. Submitted projects are reviewed by a jury based on design, usability, creativity, and content. The platform also serves as a community hub for discovering digital trends, showcasing work, and accessing educational resources including talks and interviews. Design professionals from international companies have participated in Awwwards events and platform content. For example, Wix, a cloud-based web development company known for its website builder tools, has featured prominently in Awwwards conferences, with its design leadership contributing to discussions on design trends and creative thinking.

  Read more →
• 

  RadioVIS

  RadioVIS is a protocol for sideband signalling of images and text messages for a broadcast audio service to provide a richer visual experience. It is an application and sub-project of RadioDNS, which allows radio consumption devices to look up an IP-based service based on the parameters of the currently tuned broadcast station. In January 2015, the functionality of RadioVIS was integrated to Visual Slideshow (ETSI TS 101 499 v3.1.1). The original RVIS01 document is now deprecated. == Details == The protocol enables either Streaming Text Oriented Messaging Protocol (STOMP) or Comet to deliver text and image URLs to a client, with the images being acquired over a HTTP connection. The technology is currently implemented by a number of broadcasters across the world, including Global Radio, Bauer Radio in the UK, RTÉ in the Republic Of Ireland, Südwestrundfunk in Germany and a number of Australian media groups amongst others. A number of software clients exist to show the protocol, as well as hardware devices such as the Pure Sensia from Pure Digital, and the Colourstream from Roberts Radio.

  Read more →
• 

  Too Good To Go

  Too Good To Go is a service with a mobile application that connects customers to restaurants and stores that have surplus unsold food. The service covers major European cities, and in October 2020 started operations in North America. As part of the initiatives taken on the International Day of Awareness of Food Loss and Waste to reduce food loss and waste, the app is suggested alongside OLIO among many others. In 2023 Too Good To Go was the fastest-growing sustainable food app startup by number of downloads. As of August 2023, it claimed 164,000 businesses, serving 62 million users, have saved 155 million bags of food. As of March 2023, it claimed to have saved over 200 million meals. == History == The company was created in 2015 in Denmark by Thomas Bjørn Momsen, Klaus Bagge Pedersen, Adam Sigbrand and Brian Christensen. In 2017, Mette Lykke (co-founder of Endomondo) joined as CEO. In February 2019, the company raised an additional 6 million euros in a new round of investment. In August 2019, Too Good To Go was re-launched in Austria. In September 2019, Too Good To Go acquired the Spanish startup weSAVEeat and merged it into its own brand. In November 2019, the offer of Too Good To Go extended to plants through a partnership with the French retail plants company Jardiland. In December 2019, Too Good To Go partnered with the French grocery retail stores Intermarché, and donated 60K euros to the French charity Restaurants du Cœur. In October 2021, Bonnie Wright teamed up with Too Good To Go to drive the initiative to reduce food waste. == Corporate affairs == The key trends for the Danish entity Too Good To Go ApS are (as of the financial year ending December 31): == International expansion == As of March 2026 the company serves the European countries Austria, Belgium, Czechia, Denmark, the Faroe Islands, France, Germany, Ireland, Italy, the Netherlands, Norway, Poland, Portugal, Spain, Sweden, Switzerland, the United Kingdom. Outside of Europe the service is available in Australia, Canada, Japan, New Zealand and the United States. == Purpose == The purpose of Too Good To Go is to reduce food waste worldwide. It developed a mobile application that connects restaurants and stores that have unsold, surplus food, with customers who can then buy whatever food the outlet considers surplus to requirements—without being able to choose—at a much lower price than normal. The food on the app is priced at one-third its original price. The company claims this reduces the waste of food that would otherwise be discarded; food waste is a global problem that affects the environment. In three years active, the app reached more than 9.5 million users. As of 2022, more than 57.7 million users and 154,000 establishments have signed up, and 139 million meals have been collected. In 2019, the company had 350 employees in Europe. As of June 2023 the company was estimated to have 1,289 employees. == Use == Food outlets must notify the TGTG company about what they have available on each day, stating what sort of food they have (baked foods, meals, produce, vegan food), and the price for a 'surprise bag', whose contents they determine; the user cannot choose, but the original prices will be three or more times the TGTG price. Notification is made early based upon the quantity predicted to be left over, not at the end of a selling period. Users must register to use the service. A mobile phone with an Internet connection running Android or iOS is needed. The user runs the TGTG app, which lists outlets available within a chosen distance and time range. The customer can then order and pay for a 'surprise bag'. The supplier can cancel an order at any time if the expected surplus is not available—the purchaser is notified by text message—and the purchaser can cancel with two hours' notice. The phone must be taken to the food supplier in a specified pickup time window, often 30 or 60 minutes long, and the transaction is finalised by swiping the app—connected to the Internet—to confirm collection.

  Read more →
• 

  HTTP cookie

  An HTTP cookie (also called web cookie, Internet cookie, browser cookie, or simply cookie) is a small block of data created by a web server while a user is browsing a website and placed on the user's computer or other device by the user's web browser. Cookies are placed on the device used to access a website, and more than one cookie may be placed on a user's device during a session. Cookies serve useful and sometimes essential functions on the web. They enable web servers to store stateful information (such as items added in the shopping cart in an online store) on the user's device or to track the user's browsing activity (including clicking particular buttons, logging in, or recording which pages were visited in the past). They can also be used to save information that the user previously entered into form fields, such as names, addresses, passwords, and payment card numbers for subsequent use. Authentication cookies are commonly used by web servers to authenticate that a user is logged in, and with which account they are logged in. Without the cookie, users would need to authenticate themselves by logging in on each page containing sensitive information that they wish to access. The security of an authentication cookie generally depends on the security of the issuing website and the user's web browser, and on whether the cookie data is encrypted. Security vulnerabilities may allow a cookie's data to be read by an attacker, used to gain access to user data, or used to gain access (with the user's credentials) to the website to which the cookie belongs (see cross-site scripting and cross-site request forgery for examples). Tracking cookies, and especially third-party tracking cookies, are commonly used as ways to compile long-term records of individuals' browsing histories — a potential privacy concern that prompted European and U.S. lawmakers to take action in 2011. European law requires that all websites targeting European Union member states gain "informed consent" from users before storing non-essential cookies on their device. == Background == === Origin of the name === The term cookie was coined by web-browser programmer Lou Montulli. It was derived from the term magic cookie, which is a packet of data a program receives and sends back unchanged, used by Unix programmers. === History === Magic cookies were already used in computing when computer programmer Lou Montulli had the idea of using them in web communications in June 1994. At the time, he was an employee of Netscape Communications, which was developing an e-commerce application for MCI. Vint Cerf and John Klensin represented MCI in technical discussions with Netscape Communications. MCI did not want its servers to have to retain partial transaction states, which led them to ask Netscape to find a way to store that state in each user's computer instead. Cookies provided a solution to the problem of reliably implementing a virtual shopping cart. Together with John Giannandrea, Montulli wrote the initial Netscape cookie specification the same year. Version 0.9beta of Mosaic Netscape, released on 13 October 1994, supported cookies. The first use of cookies (out of the labs) was checking whether visitors to the Netscape website had already visited the site. Montulli applied for a patent for the cookie technology in 1995, which was granted in 1998. Support for cookies was integrated with Internet Explorer in version 2, released in October 1995. The introduction of cookies was not widely known to the public at the time. In particular, cookies were accepted by default, and users were not notified of their presence. The public learned about cookies after the Financial Times published an article about them on 12 February 1996. In the same year, cookies received a lot of media attention, especially because of potential privacy implications. Cookies were discussed in two U.S. Federal Trade Commission hearings in 1996 and 1997. The development of the formal cookie specifications was already ongoing. In particular, the first discussions about a formal specification started in April 1995 on the www-talk mailing list. A special working group within the Internet Engineering Task Force (IETF) was formed. Two alternative proposals for introducing state in HTTP transactions had been proposed by Brian Behlendorf and David Kristol respectively. But the group, headed by Kristol himself and Lou Montulli, soon decided to use the Netscape specification as a starting point. In February 1996, the working group identified third-party cookies as a considerable privacy threat. The specification produced by the group was eventually published as RFC 2109 in February 1997. It specifies that third-party cookies were either not allowed at all, or at least not enabled by default. At this time, advertising companies were already using third-party cookies. The recommendation about third-party cookies of RFC 2109 was not followed by Netscape and Internet Explorer. RFC 2109 was superseded by RFC 2965 in October 2000. RFC 2965 added a Set-Cookie2 header field, which informally came to be called "RFC 2965-style cookies" as opposed to the original Set-Cookie header field which was called "Netscape-style cookies". Set-Cookie2 was seldom used, however, and was deprecated in RFC 6265 in April 2011 which was written as a definitive specification for cookies as used in the real world. No modern browser recognizes the Set-Cookie2 header field. == Terminology == === Session cookie === A session cookie (also known as an in-memory cookie, transient cookie or non-persistent cookie) exists only in temporary memory while the user navigates a website. Session cookies expire or are deleted when the user closes the web browser. Session cookies are identified by the browser by the absence of an expiration date assigned to them. === Persistent cookie === A persistent cookie expires at a specific date or after a specific length of time. For the persistent cookie's lifespan set by its creator, its information will be transmitted to the server every time the user visits the website that it belongs to, or every time the user views a resource belonging to that website from another website (such as an advertisement). For this reason, persistent cookies are sometimes referred to as tracking cookies because they can be used by advertisers to record information about a user's web browsing habits over an extended period of time. Persistent cookies are also used for reasons such as keeping users logged into their accounts on websites, to avoid re-entering login credentials at every visit. (See § Uses, below.) === Secure cookie === A secure cookie can only be transmitted over an encrypted connection (i.e. HTTPS). They cannot be transmitted over unencrypted connections (i.e. HTTP). This makes the cookie less likely to be exposed to cookie theft via eavesdropping. A cookie is made secure by adding the Secure flag to the cookie. === Http-only cookie === An http-only cookie cannot be accessed by client-side APIs, such as JavaScript. This restriction eliminates the threat of cookie theft via cross-site scripting (XSS). However, the cookie remains vulnerable to cross-site tracing (XST) and cross-site request forgery (CSRF) attacks. A cookie is given this characteristic by adding the HttpOnly flag to the cookie. === Same-site cookie === In 2016 Google Chrome version 51 introduced a new kind of cookie with attribute SameSite with possible values of Strict, Lax or None. With attribute SameSite=Strict, the browsers would only send cookies to a target domain that is the same as the origin domain. This would effectively mitigate cross-site request forgery (CSRF) attacks. With SameSite=Lax, browsers would send cookies with requests to a target domain even it is different from the origin domain, but only for safe requests such as GET (POST is unsafe) and not third-party cookies (inside iframe). Attribute SameSite=None would allow third-party (cross-site) cookies, however, most browsers require secure attribute on SameSite=None cookies. The Same-site cookie is incorporated into a new RFC draft for "Cookies: HTTP State Management Mechanism" to update RFC 6265 (if approved). Chrome, Firefox, and Edge started to support Same-site cookies. The key of rollout is the treatment of existing cookies without the SameSite attribute defined, Chrome has been treating those existing cookies as if SameSite=None, this would let all website/applications run as before. Google intended to change that default to SameSite=Lax in Chrome 80 planned to be released in February 2020, but due to potential for breakage of those applications/websites that rely on third-party/cross-site cookies and COVID-19 circumstances, Google postponed this change to Chrome 84. === Supercookie === A supercookie is a cookie with an origin of a top-level domain (such as .com) or a public suffix (such as .co.uk). Ordinary cookies, by contrast, have an origin of a specific domain name, such as ex

  Read more →
• 

  Information element

  An information element, sometimes informally referred to as a field, is an item in Q.931 and Q.2931 messages, IEEE 802.11 management frames, and cellular network messages sent between a base transceiver station and a mobile phone or similar piece of user equipment. An information element is often a type–length–value item, containing 1) a type (which corresponds to the label of a field), a length indicator, and a value, although any combination of one or more of those parts is possible. A single message may contain multiple information elements. The abbreviation IE is found in many technical specification documents from 3GPP. It is not uncommon for a single specification document to contain thousands of references to IEs.

  Read more →
• 

  Groundswell (book)

  Groundswell is a book by Forrester Research executives Charlene Li and Josh Bernoff that focuses on how companies can take advantage of emerging social technologies. It was published in 2008 by Harvard Business Press. A revised edition was published in 2011. The book attempts to explain a shift in the relationship between customers and companies, in which companies are no longer able to control customers' attitudes through market research, customer service, and advertising. Instead, customers are controlling the conversation by using new media to communicate about products and companies. == Synopsis == The groundswell is characterized by several tactics that guide companies into using social technologies strategically and effectively. Listening: Businesses should listen to their customers to understand what the market is looking for in their products. In order to do this, a company needs to find out if their customers are using social technologies and how they are using them. Talking: Instead of advertising to customers, marketing departments should find creative ways to connect with users about their experience with a product and their feelings about the brand. One common method is participation in social networks. Energizing: Enthusiastic customers are part of the groundswell, and companies can recognize and appreciate these customers by creating online communities and social platforms where they can connect with the brand and provide reviews. Supporting: Businesses can harness the support of their own employees by creating internal social applications for them to connect with the brand, also known as enterprise social software. == Groundswell in action == === Examples === Some companies distinguish their product through the use of social technologies. Tom Dickson successfully marketed his Blendtec line of blenders through the viral marketing campaign Will It Blend? The groundswell spread marketing messages through Digg and YouTube with a small budget and little marketing experience. Other companies have been able to listen to and talk with the groundswell by building their own online communities. Procter & Gamble created beinggirl.com Archived 2016-04-10 at the Wayback Machine to introduce girls to P&G feminine care products. The community approach worked because the company could reach girls with information that might seem embarrassing or sensitive in a traditional marketing campaign. === Risks === Features of particular industries or companies can make direct customer engagement more difficult. For instance, some companies must work within industry regulations, national or multinational corporations must balance corporate and local engagement, and other companies must find ways to engage with customers on time-sensitive issues. == Reception == Kevin Allison of the Financial Times praised the book for its focus on Web analytics: "[Groundswell] is not so much a manifesto or a dissection of online culture as it is a how-to manual for executives and mid-level managers trying to navigate this fast-changing and often confusing environment." The book won the American Marketing Association Foundation’s Berry-AMA Book Prize for best marketing book of 2009. It was also listed by: Amazon, as one of the Top 10 Business & Investing Books of 2008 CIO Insight, as one of the Top 10 Business-Tech Books of 2008 and one of 10 Insightful Web 2.0 Books Fortune as Magazine as one of the 3 best Web books of 2008 Advertising Age as number 3 of 10 Books You Should Have Read BusinessWeek as one of the Best Innovation & Design Books of 2008 "strategy+business" as one of the Best Business Books 2008 and “Top Shelf” in Marketing

  Read more →
• 

  Circular thresholding

  Circular thresholding is an algorithm for automatic image threshold selection in image processing. Most threshold selection algorithms assume that the values (e.g. intensities) lie on a linear scale. However, some quantities such as hue and orientation are a circular quantity, and therefore require circular thresholding algorithms. The example shows that the standard linear version of Otsu's method when applied to the hue channel of an image of blood cells fails to correctly segment the large white blood cells (leukocytes). In contrast the white blood cells are correctly segmented by the circular version of Otsu's method. == Methods == There are a relatively small number of circular image threshold selection algorithms. The following examples are all based on Otsu's method for linear histograms: (Tseng, Li and Tung 1995) smooth the circular histogram, and apply Otsu's method. The histogram is cyclically rotated so that the selected threshold is shifted to zero. Otsu's method and histogram rotation are applied iteratively until several heuristics involving class size, threshold location, and class variance are satisfied. (Wu et al. 2006) smooth the circular histogram until it contains only two peaks. The histogram is cyclically rotated so that the midpoint between the peaks is shifted to zero. Otsu's method and histogram rotation are applied iteratively until convergence of the threshold. (Lai and Rosin 2014) applied Otsu's method to the circular histogram. For the two class circular thresholding task they showed that, for a histogram with an even number of bins, the optimal solution for Otsu's criterion of within-class variance is obtained when the histogram is split into two halves. Therefore the optimal solution can be efficiently obtained in linear rather than quadratic time. == References and further reading == D.-C. Tseng, Y.-F. Li, and C.-T. Tung, Circular histogram thresholding for color image segmentation in Proc. Int. Conf. Document Anal. Recognit., 1995, pp. 673–676. J. Wu, P. Zeng, Y. Zhou, and C. Olivier, A novel color image segmentation method and its application to white blood cell image analysis in Proc. Int. Conf. Signal Process., vol. 2. 2006, pp. 16–20. Y.K. Lai, P.L. Rosin, Efficient Circular Thresholding, IEEE Trans. on Image Processing 23(3), 992–1001 (2014). doi:10.1109/TIP.2013.2297014

  Read more →
• 

  Blend4Web

  Blend4Web is a free and open source framework for creating and displaying interactive 3D computer graphics in web browsers. == Overview == The Blend4Web framework leverages Blender to edit 3D scenes. Content rendering relies on WebGL, Web Audio, WebVR, and other web standards, without the use of plug-ins. It is dual-licensed. The framework is distributed under the free and open source GPLv3 and, a non-free license - with the source code being hosted on GitHub. A 3D scene can be prepared in Blender and then exported as a pair of JSON and binary files to load in a web application. It can also be exported as a single, self-contained HTML file, in which exported data, the web player GUI, and the engine itself are packed. The HTML option is considered to be the simplest way. The resulting file, which has a minimum size of 1 MB, can be embedded in a web page using a standard iframe HTML element. Blend4Web-powered web applications can be deployed on social networking websites such as Facebook. The Blend4Web toolchain consists of JavaScript libraries, the Blender add-on, and a set of tools for tweaking 3D scene parameters, debugging, and optimization. Developed by Moscow-based company Triumph in 2010, Blend4Web was publicly released on March 28, 2014. At the end of 2017, the project founders Yuri and Alex Kovelenov quit Triumph to start the development of a new WebGL framework Verge3D. In October 2019, an "Absolutely new Blend4Web" was announced, planned to make developing 3D apps easier and to add a new marketplace where people can offer their 3D models. == Features == The framework has a number of components typically found in game engines, including a positional audio system, physics engine (a fork of Bullet ported to JavaScript), animation system, and an abstraction layer for game logic programming. Up to 8 different types of animations can be assigned to a single object, including skeletal and per-vertex animation. The speed and the direction of animation (forward/backward play), as well as particle system parameters (size, initial velocity, and count), can be changed through the API. Among other supported features are: scene data dynamic loading and unloading, subsurface scattering simulation, and image-based lighting. Some out-of-box options exist for rendering extended outdoor environments, including foliage-wind interaction, water, atmosphere, and sunlight simulation. One example demonstrating these effects is "The Farm" tech demo, which also features multiple animated NPCs and the ability to walk, interact with objects and drive a vehicle in first-person mode. Being based on the cross-browser WebGL API, Blend4Web runs in the majority of web browsers, including mobile ones. There are some caveats for browsers with experimental WebGL support, such as Internet Explorer. There are also applications developed to run on Tizen-powered devices such as the Samsung Gear S2 smartwatch. Other features include: draw call batching, hidden surface determination, threaded physics simulation and ocean simulation. In version 14.09, Blend4Web introduced the possibility of adding interactivity to 3D scenes using a visual programming tool. The tool is reminiscent of the BGE's logic editor as it uses logic blocks that are placed inside Blender. It plays back animation tracks authored by an artist when the user interacts with predefined 3D objects. Since version 15.03, Blend4Web has supported attaching HTML elements (such as information windows) to 3D objects ("annotations") and copying objects in run time ("instancing"). The following post-processing effects are supported: glow, bloom, depth of field, crepuscular rays, motion blur, and screen space ambient occlusion. == Virtual reality and augmented reality == Virtual reality devices have been supported since the end of 2015. Specifically, Oculus Rift head-mounted display works over experimental WebVR API. The software also now includes preliminary support for gamepads, based on the Gamepad API. In 2017, the option to author augmented reality content was added. The system is based on the open-source tracking library ARToolKit and uses the WebRTC protocols. Starting from version 17.08, finger tracking is supported through the Leap Motion device. == Blender integration == The Blender add-on is written in Python and C and can be compiled for the Linux x86/x64, OS X x64, and MS Windows x86/x64 platforms. A Blend4Web-specific profile can be activated in the add-on settings. When switching to this profile, the Blender interface changes so that it only reveals settings relevant to Blend4Web. Blend4Web supports a set of Blender-specific features such as the node material editor (a tool for visual shader programming) and the particle system. There is basic support for Blender's non-linear animation (NLA) editor for creating simple scenarios. Blend4Web is based on Blender's real-time GLSL rendering engine, which users are recommended to use in order to enable WYSIWYG editing. == Notable uses == NASA developed an interactive web application called Experience Curiosity to celebrate the 3rd anniversary of the Curiosity rover landing on Mars. This Blend4Web-based app makes it possible to operate the rover, control its cameras and the robotic arm, and reproduce some of the prominent events of the Mars Science Laboratory mission. The application got presented at the beginning of the WebGL section at SIGGRAPH 2015. Experience Curiosity was ported to Verge3D for Blender in 2018 with several performance improvements and bug fixes. A General Motors authorized dealer in the United Arab Emirates has placed a functional Chevrolet Camaro 3D configurator on its website. Greenpeace created interactive 3D infographics to back Greenpeace's Detox campaign in Russia. Tallink featured an interactive 3D presentation of its MS Megastar vessel to allow visitors to browse details of the ship.

  Read more →
• 

  Robert Abel and Associates

  Robert Abel and Associates (RA&A) was an American pioneering animation production company specializing in television commercials made with computer graphics. Founded by Robert Abel and Con Pederson in 1971, RA&A was especially known for their art direction and won many Clio Awards. Abel and his team created some of the most advanced and impressive computer-animated works of their time, including full ray-traced renders and fluid character animation at a time when such things were largely unknown. A variety of high-profile television advertisements, graphics sequences for motion pictures (including The Andromeda Strain and Tron), and work on laserdisc video games such as Cube Quest, put Abel and his team on the map in the early 1980s. The company was also originally commissioned to create the visual effects for Star Trek: The Motion Picture, but were subsequently taken off the project for mishandling funds. The company was also notable on its work for The Jacksons' 1981 music video "Can You Feel It." RA&A was on the southwest corner of Highland Avenue and Romaine in the heart of Hollywood, California. RA&A closed in 1987 following an ill-fated merger with now-defunct Omnibus Computer Graphics, Inc., a company which had been based in Toronto. Many people who worked at RA&A went on to other ground-breaking projects, including the founding of Wavefront Technologies, Rhythm & Hues and other studios. Many RA&A people went on to win Academy Awards.

  Read more →
• 

  Brand networking

  Brand networking is the engagement of a social networking service around a brand by providing consumers with a platform of relevant content, elements of participation, and a currency, score, or ranking. Brand networking creates communities that serve as interactive destinations to encourage brand participation online and off. This evolved level of user participation with the brand facilitates strong relationships with consumers, leverages sales, and generates fan equity. The concept builds on the marketing literature on brand communities, which describes specialized, non-geographically bound groups of consumers organized around shared interest in a brand, and on subsequent research on social-media-based brand communities that examines how such groups operate when embedded in general-purpose networking platforms. == History == The development and growth of social networking in the early 2000s gave birth to brand networking. Brands saw the immediate potential to reach and interact with consumers through online platforms like Facebook and MySpace. At first, the ability to reach consumers through these platforms was inadequate; brands had the option to join as members or simply advertise on these sites. The potential existed to not only display advertisements to consumers, but to encourage them to interact with the brand. This is when brands made the shift to create their own networking platforms. Less evolved attempts to connect brands with consumers via networking are typically built as online platforms meant only to complement a product/service and are limited in functionality. Typically these sites offer consumers the opportunity to interact through discussion boards and group pages. The Guiding Light Community was built to complement the popular CBS television soap opera. The site offers members reward points for contributing content to discussion boards and blogs (which is all geared toward the show). == Structure == Brand networking is more than the utilization of a social networking platform; it is connecting consumers together and constructing relationships directly with the brand. Three key elements, in unity, create effective brand networking: relevant content, elements of participation, and a competitive currency. Websites in conjunction with other media types (television, radio, print) present content around a vertical industry, sector of interest, or cultural and social issues for a brand. This can be in areas such as health, marketing, or business, or any content relevant to the brand message. Such content is not only provided by the brand but also in the form of consumer-generated media. Research on brand-related user-generated content across major platforms suggests that the form and tone of consumer contributions vary by platform, with promotional content more common on some networks and response-oriented content on others. A brand provides participation with consumers online and offline. This is accomplished through the combination of typical social networking features online, such as personalised pages, friend lists, groups, and messaging, alongside elements of involvement offline. This is not simply connecting an online platform with mobile devices, but providing separate mobile features jointly with a secondary media type to drive online usage and build relationships with the brand on the go. By participating in mobile campaigns, users are interacting with the brand outside of traditional brick and mortar or e-commerce destinations. Empirical work on consumer brand engagement in social media frames such participation along cognitive, affective, and behavioural dimensions. The final element of brand networking involves incentivising participation with the other two elements. The addition of a currency or point system acts as an anchor to the brand and network and creates a competitive dynamic between consumers. These points are distributed for activity carried out outside of the networking site. By incentivising usage offline, the brand image is reinforced for the consumer and strengthens the relationship. Consumers are turned into promoters for both the brand and the users' benefit. The use of points, badges, leaderboards, and similar mechanics is described in the marketing literature as gamification, and has been linked to higher participation rates in mobile and loyalty programmes. == Fan equity == Fan equity is the idea that by locking in consumers to a brand, they are turned into fans of the brand. As fans, they promote, interact, and consume on a daily basis and become assets. Apple Inc. is one example of a company often cited as possessing fan equity. Customers of Apple are extremely brand loyal and are assets to the company. Creating a fan-generated brand is a difficult but effective method of business. Through the use of brand networking, a company is able to build a consumer or fan base that provides a strong relationship between business and consumers. The trust is formed and fans do a lot of work for the brand by word of mouth. Peer-to-peer channels are the strongest means of communication for a brand, but also one in which the brand can only influence and not control. Subsequent research links community engagement with brand trust, identifying community engagement as a mediator between social-media brand community participation and trust. This method of business is argued to be a relationship handled by the brand generally for its own gain. Many fans do not realise the work they are doing for companies by using their product or service. Facebook is a fan-based brand that has become a global phenomenon through customer use, with social media features such as sharing and commenting. With the growth of social media, marketing and advertising through social media has continued to expand. Brands can display and promote their products or services at a fast rate, with consumers sharing and contributing to the brand on a global scale. This can also be seen as online word of mouth exposure that can produce positive or negative feedback for brands. Once consumers become fans they are typically loyal, which can create positive word of mouth for a brand. Fans become a valuable asset, boosting the status and reputation of a brand. Different perceptions of brands can be linked to a person's origin or religion, which creates a difficulty when trying to enter a market or gain market share. Businesses need to be aware of the types of products or services they introduce to a specific market, ensuring they are culturally sensitive. Fan pages are created on social media to maintain the relationship between brands and consumers. By engaging and interacting with consumers, brands obtain fans and produce positive imaging. Some fans become attached to brands and are often encouraged to remain as fans through the use of celebrities endorsing the brand. Research on parasocial interaction in social-media environments suggests that one-sided emotional bonds that consumers form with endorsers and brand personae help convert ordinary followers into engaged fans.

  Read more →
• 

  2024–present global memory supply shortage

  A global computer memory supply shortage started in 2024 due to supply constraints and rapid price escalation in the semiconductor memory market, particularly affecting DRAM and NAND flash memory. This shortage is sometimes labelled by tech media outlets as "RAMmageddon" or the "RAMpocalypse". Unlike the 2020–2023 global chip shortage, which stemmed primarily from pandemic-related supply chain disruptions from COVID-19, this shortage is driven by a structural reallocation of manufacturing capacity toward high-margin products for artificial intelligence infrastructure, creating scarcity of computer memory in consumer and enterprise PC markets. According to a 2026 Kearney's PERLab analysis, the shortage is expected to last at least until 2030, with CEOs agreeing with the timelines. == Background == Following a severe market downturn in 2022–2023, major memory manufacturers—Samsung Electronics, SK Hynix, and Micron Technology—implemented strategic production cuts to stabilize pricing. By mid-2024, the rapid expansion of generative AI services triggered unprecedented demand for specialized memory products, particularly High Bandwidth Memory (HBM) used in AI accelerators and data center GPUs. Specialized components of semiconductor technology are also experiencing supply constraints due to high demand in AI application. For example, glass cloth, a high-performance glass fiber substrate used for power efficient high speed data transfer and a crucial component of semiconductor manufacturing, is experiencing a supply crisis. Nitto Boseki, a Japanese firm having overwhelming monopoly in its production, is not able to meet increased demands, making chip-makers such as Qualcomm, Apple, Nvidia and AMD compete for securing supply. There are also reports of smaller electronics companies struggling to find suppliers for components such as NAND flash. Memory suppliers are adapting to increased demands and market unpredictability by requiring prepayment or shorter time-frame of payment, which makes it more difficult for smaller firms to acquire capital to survive. By 2026, due to steadily increased demand on resources, CPUs are also experiencing shortage issues due to low fabrication capacity, prioritisation of server CPUs, and increased demand, with CPU prices also being forecast to increase by as much as 15%. The demand on memory has also increased strain on other electronic components such as hard disk devices, with reports such as Western Digital's hard disk supply for 2026 being booked for enterprise applications before February 2026. A 2024 McKinsey analysis projected that global demand for AI-ready data center capacity would grow at approximately 33% annually through 2030, with AI workloads consuming roughly 70% of total data center capacity by the decade's end. In addition, according to Kearney's State of Semiconductor 2025 Report, executives were already expecting a shortage in the <8nm wafer size with memory chips being mentioned as an acute source of concern. Multiple companies mentioned being prepared for it through long-term agreements with RAM suppliers or amassing additional inventory. On 24 March 2026, Google announced TurboQuant, a memory compression technology focused on large language models (LLM) and vector search engines, which it claimed achieves 6x lower memory consumption in tested local LLMs and 8x performance enhancement in tests running on H100 accelerators. The technology is also a drop in enhancement for existing inference pipeline. Amid speculation about memory demand trends, memory manufacturers, SanDisk, Micron, Western Digital and Seagate, among other companies involved in memory manufacture experienced stock price declines. Prices of memory kits also reduced in the following months, although still at inflated prices. == Causes == === HBM production displacement === HBM manufacturing requires significantly more wafer capacity per bit than standard DRAM modules. Industry sources reported that as manufacturers allocated increasing wafer capacity to HBM production to meet contracts with AI infrastructure providers, the supply of conventional DDR4 and DDR5 modules for consumer PCs and smartphones contracted sharply. By September 2025, Samsung Electronics had reportedly expanded its 1c DRAM capacity to target 60,000 wafers per month specifically for HBM4 production, further diverting resources from consumer memory lines. === Geopolitical and trade barriers === The supply chain was further constrained by escalating trade tensions between the United States and China. Throughout 2025, fears of U.S. regulatory backlash and new tariff structures led major manufacturers like Samsung and SK Hynix to halt sales of older semiconductor manufacturing equipment to Chinese entities, effectively capping production capacity in the region. Additionally, proposed tariff policies by the U.S. administration in late 2025 prompted supply chain realignments, with Apple reportedly accelerating plans to source all U.S.-bound iPhones from India to avoid potential levies. === NAND flash capacity constraints === In the NAND flash segment, manufacturers prioritized higher-margin enterprise SSDs for data center applications while phasing out older process nodes more rapidly than anticipated. In November 2025, contract prices for NAND wafers increased by more than 60% month-over-month for certain product categories, with 512GB TLC experiencing the steepest rise as legacy manufacturing capacity was retired. == Impact on industry and consumers == === Manufacturer responses === Major PC manufacturers responded to component cost increases with significant price adjustments and supply chain strategies. Dell Technologies Chief Operating Officer Jeff Clarke stated during a November 2025 analyst call that the company had "never witnessed costs escalating at the current pace," describing tighter availability across DRAM, hard drives, and NAND flash memory. Analysts at Morgan Stanley downgraded Dell Technologies stock from "Overweight" to "Underweight" in late 2025, citing the company's heavy exposure to rising server memory costs. The firm warned that skyrocketing memory prices could significantly erode margins for server and PC OEMs. Conversely, Apple Inc. was reportedly less affected than its competitors, having secured long-term supply agreements for DRAM through the first quarter of 2026. Lenovo Chief Financial Officer Winston Cheng described the cost surge as "unprecedented" and disclosed that the company's memory inventories were approximately 50% above normal levels in anticipation of further price increases. === Consumer electronics sector === The shortage particularly affected smartphone manufacturers and other consumer electronics producers. DRAM prices reportedly rose by 172% throughout 2025, leading manufacturers like Samsung to halt new orders for DDR5 modules to reassess pricing structures and Micron to exit its 'Crucial' brand of consumer products. In Tokyo's Akihabara electronics district, retailers began limiting purchases of memory products to prevent hoarding, with prices for popular DDR5 memory modules more than doubling in some cases. Despite the broad trend of rising hardware costs, some companies engaged in aggressive pricing strategies to maintain market share; for example, Sony reduced the price of the PlayStation 5 by $100 for Black Friday 2025, potentially absorbing increased component costs to stimulate software ecosystem growth. Due to memory prices more than doubling in a single quarter, HP revealed in its Q1 2026 earnings call that memory costs account for 35% of PC build materials up from 15-18% previous quarter. Despite showing strong Q1 2026 earning driven by Windows 11 upgrade cycle and AI PC adoption, HP warned investors of low operating margins and up to double digit percentage decline for coming quarter. Trendforce, an IT analytics company, updated its forecast from 1.7% year-over-year growth in PC market to 2.6% year-over-year decline for 2026, amid backdrop of steadily increasing prices and supply crisis. Research and analytics firms, Gartner and IDC expect worldwide PC market to decline 10-11% and smartphone market to decline 8-9% in 2026. Gartner also projects that rising memory prices will make low-margin entry level laptops under 500 USD financially unviable in two years. The RAM shortage has delayed the release of Valve's second Steam Machine due to increased memory prices. The device was originally set to launch in early 2026. === AI infrastructure competition === Technology companies including Google, Amazon, Microsoft, and Meta Platforms placed open-ended orders with memory suppliers, indicating they would accept as much supply as available regardless of cost, according to Reuters sources. The limited supply of AI chips has been cited as a reason for the slow down in compute growth. In October 2025, OpenAI formally announced a strategic partnership using letters of intent with Samsung Electronics and SK Hynix

  Read more →
• 

  Interstellar communication

  Interstellar communication is the transmission of signals between planetary systems. Sending interstellar messages is potentially much easier than interstellar travel, being possible with technologies and equipment which are currently available. However, the distances from Earth to other potentially inhabited systems introduce prohibitive delays, assuming the limitations of the speed of light. Even an immediate reply to radio communications sent to stars tens of thousands of light-years away would take many human generations to arrive. == Radio == The SETI project has for the past several decades been conducting a search for signals being transmitted by extraterrestrial life located outside the Solar System, primarily in the radio frequencies of the electromagnetic spectrum. Special attention has been given to the Water Hole, the frequency of one of neutral hydrogen's absorption lines, due to the low background noise at this frequency and its symbolic association with the basis for what is likely to be the most common system of biochemistry (but see alternative biochemistry). The regular radio pulses emitted by pulsars were briefly thought to be potential intelligent signals; the first pulsar to be discovered was originally designated "LGM-1", for "Little Green Men." They were quickly determined to be of natural origin, however. Several attempts have been made to transmit signals to other stars as well. (See "Realized projects" at Active SETI.) One of the earliest and most famous was the 1974 radio message sent from the largest radio telescope in the world, the Arecibo Observatory in Puerto Rico. An extremely simple message was aimed at a globular cluster of stars known as M13 in the Milky Way Galaxy and at a distance of 30,000 light years from the Solar System. These efforts have been more symbolic than anything else, however. Further, a possible answer needs double the travel time, i.e. tens of years (near stars) or 60,000 years (M13). == Other methods == It has also been proposed that higher frequency signals, such as lasers operating at visible light frequencies, may prove to be a fruitful method of interstellar communication; at a given frequency it takes surprisingly small energy output for a laser emitter to outshine its local star from the perspective of its target. Other more exotic methods of communication have been proposed, such as modulated neutrino or gravitational wave emissions. These would have the advantage of being essentially immune to interference by intervening matter. Sending physical mail packets between stars may prove to be optimal for many applications. While mail packets would likely be limited to speeds far below that of electromagnetic or other light-speed signals (resulting in very high latency), the amount of information that could be encoded in only a few tons of physical matter could more than make up for it in terms of average bandwidth. The possibility of using interstellar messenger probes for interstellar communication — known as Bracewell probes — was first suggested by Ronald N. Bracewell in 1960, and the technical feasibility of this approach was demonstrated by the British Interplanetary Society's starship study Project Daedalus in 1978. Starting in 1979, Robert Freitas advanced arguments for the proposition that physical space-probes provide a superior mode of interstellar communication to radio signals, then undertook telescopic searches for such probes in 1979 and 1982.

  Read more →
• 

  Solid-state electronics

  Solid-state electronics are semiconductor electronics: electronic equipment that use semiconductor devices such as transistors, diodes and integrated circuits (ICs). The term is also used as an adjective for devices in which semiconductor electronics that have no moving parts replace devices with moving parts, such as the solid-state relay, in which transistor switches are used in place of a moving-arm electromechanical relay, or the solid-state drive (SSD), a type of semiconductor memory used in computers to replace hard disk drives, which store data on rotating disks. == History == The term solid-state became popular at the beginning of the semiconductor era in the 1960s to distinguish this new technology. A semiconductor device works by controlling an electric current consisting of electrons or holes moving within a solid crystalline piece of semiconducting material such as silicon, while the thermionic vacuum tubes it replaced worked by controlling a current of electrons or ions in a vacuum within a sealed tube. Although the first solid-state electronic device was the cat's whisker detector, a crude semiconductor diode invented around 1904, solid-state electronics started with the invention of the transistor in 1947. Before that, all electronic equipment used vacuum tubes, because vacuum tubes were the only electronic components that could amplify—an essential capability in all electronics. The transistor, which was invented by John Bardeen and Walter Houser Brattain while working under William Shockley at Bell Laboratories in 1947, could also amplify, and replaced vacuum tubes. The first transistor hi-fi system was developed by engineers at GE and demonstrated at the University of Philadelphia in 1955. In terms of commercial production, The Fisher TR-1 was the first "all transistor" preamplifier, which became available mid-1956. In 1961, a company named Transis-tronics released a solid-state amplifier, the TEC S-15. The replacement of bulky, fragile, energy-hungry vacuum tubes by transistors in the 1960s and 1970s created a revolution not just in technology but in people's habits, making possible the first truly portable consumer electronics such as the transistor radio, cassette tape player, walkie-talkie and quartz watch, as well as the first practical computers and mobile phones. Other examples of solid state electronic devices are the microprocessor chip, LED lamp, solar cell, charge coupled device (CCD) image sensor used in cameras, and semiconductor laser. Also during the 1960s and 1970s, television set manufacturers switched from vacuum tubes to semiconductors, and advertised sets as "100% solid state" even though the cathode-ray tube (CRT) was still a vacuum tube. It meant only the chassis was 100% solid-state, not including the CRT. Early advertisements spelled out this distinction, but later advertisements assumed the audience had already been educated about it and shortened it to just "100% solid state". LED displays can be said to be truly 100% solid-state.

  Read more →