AI Email Editor

AI Email Editor — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

• 

  FloodAlerts

  FloodAlerts is a software application, developed by software specialists Shoothill, which takes real-time flooding information, and displays the data on an interactive Bing map, updating and warning its users when they, their premises or the routes they need to travel could be at risk of flooding. == History == FloodAlerts was launched in 2012, originally as the world's first Facebook flood warning app. == Operation == FloodAlerts is made available free of charge to individuals. Users are able to set up their own monitored locations and receive alerts via the application or their Facebook wall if the locations they are monitoring are at imminent risk of flooding. Hosted in the Cloud, using the Microsoft Windows Azure platform, the FloodAlerts application processes the data received from the Environment Agency, automatically creates the required map tiles, pins and alerts and displays them on an interactive Bing map, updating the content every 15 minutes. Users are able to see the latest information on the map without having to refresh their browser. FloodAlerts can also be provided as a customised risk management solution to businesses that require infrastructure or asset safety monitoring in areas where water levels are rising or receding. == Awards and recognition == FloodAlerts has received The Guardian and Virgin Media Business's 2012 Innovation Nation Awards and was shortlisted as a finalist for a further two national awards: the UK IT Industry Awards for Innovation and Entrepreneurship and The Institution of Engineering and Technology Innovation Awards for Information Technology. == In the press == The FloodAlerts application was reviewed on the BBC website. It was also reviewed on BBC Click.

  Read more →
• 

  Multisample anti-aliasing

  Multisample anti-aliasing (MSAA) is a type of spatial anti-aliasing, a technique used in computer graphics to remove jaggies. It is an optimization of supersampling, where only the necessary parts are sampled more. Jaggies are only noticed in a small area, so the area is quickly found, and only that is anti-aliased. == Definition == The term generally refers to a special case of supersampling. Initial implementations of full-scene anti-aliasing (FSAA) worked conceptually by simply rendering a scene at a higher resolution, and then downsampling to a lower-resolution output. Most modern GPUs are capable of this form of anti-aliasing, but it greatly taxes resources such as texture, bandwidth, and fillrate. (If a program is highly TCL-bound or CPU-bound, supersampling can be used without much performance hit.) According to the OpenGL GL_ARB_multisample specification, "multisampling" refers to a specific optimization of supersampling. The specification dictates that the renderer evaluate the fragment program once per pixel, and only "truly" supersample the depth and stencil values. (This is not the same as supersampling but, by the OpenGL 1.5 specification, the definition had been updated to include fully supersampling implementations as well.) In graphics literature in general, "multisampling" refers to any special case of supersampling where some components of the final image are not fully supersampled. The lists below refer specifically to the ARB_multisample definition. == Description == In supersample anti-aliasing, multiple locations are sampled within every pixel, and each of those samples is fully rendered and combined with the others to produce the pixel that is ultimately displayed. This is computationally expensive, because the entire rendering process must be repeated for each sample location. It is also inefficient, as aliasing is typically only noticed in some parts of the image, such as the edges, whereas supersampling is performed for every single pixel. In multisample anti-aliasing, if any of the multi sample locations in a pixel is covered by the triangle being rendered, a shading computation must be performed for that triangle. However this calculation only needs to be performed once for the whole pixel regardless of how many sample positions are covered; the result of the shading calculation is simply applied to all of the relevant multi sample locations. In the case where only one triangle covers every multi sample location within the pixel, only one shading computation is performed, and these pixels are little more expensive than (and the result is no different from) the non-anti-aliased image. This is true of the middle of triangles, where aliasing is not an issue. (Edge detection can reduce this further by explicitly limiting the MSAA calculation to pixels whose samples involve multiple triangles, or triangles at multiple depths.) In the extreme case where each of the multi sample locations is covered by a different triangle, a different shading computation will be performed for each location and the results then combined to give the final pixel, and the result and computational expense are the same as in the equivalent supersampled image. The shading calculation is not the only operation that must be performed on a given pixel; multisampling implementations may variously sample other operations such as visibility at different sampling levels. == Advantages == The pixel shader usually only needs to be evaluated once per pixel for every triangle covering at least one sample point. The edges of polygons (the most obvious source of aliasing in 3D graphics) are anti-aliased. Since multiple subpixels per pixel are sampled, polygonal details smaller than one pixel that might have been missed without MSAA can be captured and made a part of the final rendered image if enough samples are taken. == Disadvantages == === Alpha testing === Alpha testing is a technique common to older video games used to render translucent objects by rejecting pixels from being written to the framebuffer. If the alpha value of a translucent fragment (pixel) is below a specified threshold, it will be discarded. Because this is performed on a pixel by pixel basis, the image does not receive the benefits of multi-sampling (all of the multisamples in a pixel are discarded based on the alpha test) for these pixels. The resulting image may contain aliasing along the edges of transparent objects or edges within textures, although the image quality will be no worse than it would be without any anti-aliasing. Translucent objects that are modelled using alpha-test textures will also be aliased due to alpha testing. This effect can be minimized by rendering objects with transparent textures multiple times, although this would result in a high performance reduction for scenes containing many transparent objects. === Aliasing === Because multi-sampling calculates interior polygon fragments only once per pixel, aliasing and other artifacts will still be visible inside rendered polygons where fragment shader output contains high frequency components. === Performance === While less performance-intensive than SSAA (supersampling), it is possible in certain scenarios (scenes heavy in complex fragments) for MSAA to be multiple times more intensive for a given frame than post processing anti-aliasing techniques such as FXAA, SMAA and MLAA. Early techniques in this category tend towards a lower performance impact, but suffer from accuracy problems. More recent post-processing based anti-aliasing techniques such as temporal anti-aliasing (TAA), which reduces aliasing by combining data from previously rendered frames, have seen the reversal of this trend, as post-processing AA becomes both more versatile and more expensive than MSAA, which cannot antialias an entire frame alone. == Sampling methods == === Point sampling === In a point-sampled mask, the coverage bit for each multisample is only set if the multisample is located inside the rendered primitive. Samples are never taken from outside a rendered primitive, so images produced using point-sampling will be geometrically correct, but filtering quality may be low because the proportion of bits set in the pixel's coverage mask may not be equal to the proportion of the pixel that is actually covered by the fragment in question. === Area sampling === Filtering quality can be improved by using area sampled masks. In this method, the number of bits set in a coverage mask for a pixel should be proportionate to the actual area coverage of the fragment. This will result in some coverage bits being set for multisamples that are not actually located within the rendered primitive, and can cause aliasing and other artifacts. == Sample patterns == === Regular grid === A regular grid sample pattern, where multisample locations form an evenly spaced grid throughout the pixel, is easy to implement and simplifies attribute evaluation (i.e. setting subpixel masks, sampling color and depth). This method is computationally expensive due to the large number of samples. Edge optimization is poor for screen-aligned edges, but image quality is good when the number of multisamples is large. === Sparse regular grid === A sparse regular grid sample pattern is a subset of samples that are chosen from the regular grid sample pattern. As with the regular grid, attribute evaluation is simplified due to regular spacing. The method is less computationally expensive due to having a fewer samples. Edge optimization is good for screen aligned edges, and image quality is good for a moderate number of multisamples. === Stochastic sample patterns === A stochastic sample pattern is a random distribution of multisamples throughout the pixel. The irregular spacing of samples makes attribute evaluation complicated. The method is cost efficient due to low sample count (compared to regular grid patterns). Edge optimization with this method, although sub-optimal for screen aligned edges. Image quality is excellent for a moderate number of samples. == Quality == Compared to supersampling, multisample anti-aliasing can provide similar quality at higher performance, or better quality for the same performance. Further improved results can be achieved by using rotated grid subpixel masks. The additional bandwidth required by multi-sampling is reasonably low if Z and colour compression are available. Most modern GPUs support 2×, 4×, and 8× MSAA samples. Higher values result in better quality, but are slower.

  Read more →
• 

  Yap (company)

  Yap Speech Cloud was a multimodal speech recognition system developed by American technology company Yap Inc. It offered a fully cloud-based speech-to-text transcription platform that was used by customers such as Microsoft. The Company was a contestant at the inaugural TechCrunch conference and was subsequently acquired by Amazon in September 2011 to help develop products such as Alexa Voice Service, Echo, and Fire TV.

  Read more →
• 

  Progressive Graphics File

  PGF (Progressive Graphics File) is a wavelet-based bitmapped image format that employs lossless and lossy data compression. PGF was created to improve upon and replace the JPEG format. It was developed at the same time as JPEG 2000 but with a focus on speed over compression ratio. PGF can operate at higher compression ratios without taking more encoding/decoding time and without generating the characteristic "blocky and blurry" artifacts of the original DCT-based JPEG standard. It also allows more sophisticated progressive downloads. == Color models == PGF supports a wide variety of color models: Grayscale with 1, 8, 16, or 31 bits per pixel Indexed color with palette size of 256 RGB color image with 12, 16 (red: 5 bits, green: 6 bits, blue: 5 bits), 24, or 48 bits per pixel ARGB color image with 32 bits per pixel Lab color image with 24 or 48 bits per pixel CMYK color image with 32 or 64 bits per pixel == Technical discussion == PGF claims to achieve an improved compression quality over JPEG adding or improving features such as scalability. Its compression performance is similar to the original JPEG standard. Very low and very high compression rates (including lossless compression) are also supported in PGF. The ability of the design to handle a very large range of effective bit rates is one of the strengths of PGF. For example, to reduce the number of bits for a picture below a certain amount, the advisable thing to do with the first JPEG standard is to reduce the resolution of the input image before encoding it — something that is ordinarily not necessary for that purpose when using PGF because of its wavelet scalability properties. The PGF process chain contains the following four steps: Color space transform (in case of color images) Discrete Wavelet Transform Quantization (in case of lossy data compression) Hierarchical bit-plane run-length encoding === Color components transformation === Initially, images have to be transformed from the RGB color space to another color space, leading to three components that are handled separately. PGF uses a fully reversible modified YUV color transform. The transformation matrices are: [ Y r U r V r ] = [ 1 4 1 2 1 4 1 − 1 0 0 − 1 1 ] [ R G B ] ; [ R G B ] = [ 1 3 4 − 1 4 1 − 1 4 − 1 4 1 − 1 4 3 4 ] [ Y r U r V r ] {\displaystyle {\begin{bmatrix}Y_{r}\\U_{r}\\V_{r}\end{bmatrix}}={\begin{bmatrix}{\frac {1}{4}}&{\frac {1}{2}}&{\frac {1}{4}}\\1&-1&0\\0&-1&1\end{bmatrix}}{\begin{bmatrix}R\\G\\B\end{bmatrix}};\qquad \qquad {\begin{bmatrix}R\\G\\B\end{bmatrix}}={\begin{bmatrix}1&{\frac {3}{4}}&-{\frac {1}{4}}\\1&-{\frac {1}{4}}&-{\frac {1}{4}}\\1&-{\frac {1}{4}}&{\frac {3}{4}}\end{bmatrix}}{\begin{bmatrix}Y_{r}\\U_{r}\\V_{r}\end{bmatrix}}} The chrominance components can be, but do not necessarily have to be, down-scaled in resolution. === Wavelet transform === The color components are then wavelet transformed to an arbitrary depth. In contrast to JPEG 1992 which uses an 8x8 block-size discrete cosine transform, PGF uses one reversible wavelet transform: a rounded version of the biorthogonal CDF 5/3 wavelet transform. This wavelet filter bank is exactly the same as the reversible wavelet used in JPEG 2000. It uses only integer coefficients, so the output does not require rounding (quantization) and so it does not introduce any quantization noise. === Quantization === After the wavelet transform, the coefficients are scalar-quantized to reduce the amount of bits to represent them, at the expense of a loss of quality. The output is a set of integer numbers which have to be encoded bit-by-bit. The parameter that can be changed to set the final quality is the quantization step: the greater the step, the greater is the compression and the loss of quality. With a quantization step that equals 1, no quantization is performed (it is used in lossless compression). In contrast to JPEG 2000, PGF uses only powers of two, therefore the parameter value i represents a quantization step of 2i. Just using powers of two makes no need of integer multiplication and division operations. === Coding === The result of the previous process is a collection of sub-bands which represent several approximation scales. A sub-band is a set of coefficients — integer numbers which represent aspects of the image associated with a certain frequency range as well as a spatial area of the image. The quantized sub-bands are split further into blocks, rectangular regions in the wavelet domain. They are typically selected in a way that the coefficients within them across the sub-bands form approximately spatial blocks in the (reconstructed) image domain and collected in a fixed size macroblock. The encoder has to encode the bits of all quantized coefficients of a macroblock, starting with the most significant bits and progressing to less significant bits. In this encoding process, each bit-plane of the macroblock gets encoded in two so-called coding passes, first encoding bits of significant coefficients, then refinement bits of significant coefficients. Clearly, in lossless mode all bit-planes have to be encoded, and no bit-planes can be dropped. Only significant coefficients are compressed with an adaptive run-length/Rice (RLR) coder, because they contain long runs of zeros. The RLR coder with parameter k (logarithmic length of a run of zeros) is also known as the elementary Golomb code of order 2k. === Comparison with other file formats === JPEG 2000 is slightly more space-efficient in handling natural images. The PSNR for the same compression ratio is on average 3% better than the PSNR of PGF. It has a small advantage in compression ratio but longer encoding and decoding times. PNG (Portable Network Graphics) is more space-efficient in handling images with many pixels of the same color. There are several self-proclaimed advantages of PGF over the ordinary JPEG standard: Superior compression performance: The image quality (measured in PSNR) for the same compression ratio is on average 3% better than the PSNR of JPEG. At lower bit rates (e.g. less than 0.25 bits/pixel for gray-scale images), PGF has a much more significant advantage over certain modes of JPEG: artifacts are less visible and there is almost no blocking. The compression gains over JPEG are attributed to the use of DWT. Multiple resolution representation: PGF provides seamless compression of multiple image components, with each component carrying from 1 to 31 bits per component sample. With this feature there is no need for separately stored preview images (thumbnails). Progressive transmission by resolution accuracy, commonly referred to as progressive decoding: PGF provides efficient code-stream organizations which are progressive by resolution. This way, after a smaller part of the whole file has been received, it is possible to see a lower quality of the final picture, the quality can be improved monotonically getting more data from the source. Lossless and lossy compression: PGF provides both lossless and lossy compression in a single compression architecture. Both lossy and lossless compression are provided by the use of a reversible (integer) wavelet transform. Side channel spatial information: Transparency and alpha planes are fully supported ROI extraction: Since version 5, PGF supports extraction of regions of interest (ROI) without decoding the whole image. == Available software == The author published libPGF via a SourceForge, under the GNU Lesser General Public License version 2.0. Xeraina offers a free Windows console encoder and decoder, and PGF viewers based on WIC for 32bit and 64bit Windows platforms. Other WIC applications including File Explorer are able to display PGF images after installing this viewer. Digikam is a popular open-source image editing and cataloging software that uses libPGF for its thumbnails. It makes use of the progressive decoding feature of PGF images to store a single version of each thumbnail, which can then be decoded to different resolutions without loss, thus allowing users to dynamically change the size of the thumbnails without having to recalculate them again.

  Read more →
• 

  Fyre (software)

  Fyre, formerly de Jong Explorer, is a cross-platform tool for producing artwork based on histograms of iterated chaotic functions. It implements the Peter de Jong map in a fixed function pipeline through either a GTK GUI frontend, or a command line facility for easier rendering of high-resolution, high quality images. The program was renamed from de Jong Explorer to Fyre simply because 'It wasn't taken yet' and so that in the future, it could support more functions than just the standard Peter de Jong map. Fyre features a sidebar on the left to which the user can input the required variables and on the right is displayed the result of the equation. == Extra features == Additional image manipulation tools such as Gaussian blurs and Gamma controls are included in the program. The advantage to using them directly within Fyre is that the image accuracy and quality do not decline. Fyre features animation capabilities so that a user can link together several maps and create uncompressed AVIs from them. However, the uncompressed animation files are very large and so should be compressed with a separate tool, such as mencoder. == Peter de Jong Map == For most values of a,b,c and d the point (x,y) moves chaotically. The resulting image is a map of the probability that the point lies within the area represented by each pixel. Therefore, the longer that the user lets Fyre render for, the larger the probability map becomes and the more accurate the resulting image.

  Read more →
• 

  Real-time transcription

  Real-time transcription is the general term for transcription by court reporters using real-time text technologies to deliver computer text screens within a few seconds of the words being spoken. Specialist software allows participants in court hearings or depositions to make notes in the text and highlight portions for future reference. Real-time transcription is also used in the broadcasting environment where it is more commonly termed "captioning." == Career opportunities == Real-time reporting is used in a variety of industries, including entertainment, television, the Internet, and law. Specific careers include the following: Judicial reporters use a stenotype to provide instant transcripts on computer screens as a trial or deposition occurs. Communication access real-time translation (CART) reporters assist the hearing-impaired by transcribing spoken words, giving them personal access to the communications they need day to day. Television broadcast captioners use real-time reporting technology to allow hard-of-hearing or deaf people to see what is being said on live television broadcasts such as news, emergency broadcasts, sporting events, awards shows, and other programs. Internet information (or Webcast) reporters provide real-time reporting of sales meetings, press conferences, and other events, while simultaneously transmitting the transcripts to computers worldwide. Other rapid data entry positions. == History == Before the advent of the stenotype machine, court reporters wrote official trial transcripts by hand using a shorthand system of stenoforms that could later be translated into readable English. It often took eight years of training to learn this manual form of writing at the necessary speed. Walter Heironimus was among the first stenographers to make use of the stenotype machine during his work in the U.S. District Court system in New Jersey in 1935. A "transcript crisis" arose during the later half of the twentieth century due to the increasing volume of lawsuits. There were not enough number of court reporters to match the increasing number of trials. Not only were court reporters unavailable to attend many court proceedings, court transcripts were constantly late and the qualities varied. Some believed it was due to the non-interchangeability between court reporters, and others believed it was simply due to a labor shortage. In the meantime, magnetic audiotape recording, or known as electronic recording (ER) began to threaten all reporters' job since it could record long-hour courtroom trials and replace a court reporter's position in the courtroom. As a result, machine translation (MT) intended to serve as a solution for preventing ER from potentially replacing reporters' jobs. However, MT relied heavily on human labors operating behind the system and many started to question if it should be the right way to end the "transcript crisis." Later in 1964, set up by CIA, the Automatic Language Processing Advisory Committee (ALPAC) was set to review whether MT was capable of solving this crisis. They concluded that MT had failed to do so. Then Patrick O'Neill, a skilled and experienced court reporter, stayed to work on the stenotype-translation project with CIA and developed the prototype CAT system. After adopting the CAT system in court-reporting community, CAT was brought into the television broadcasting system, aiming to provide captions for the deaf or hard-of-hearing communities. In 1983, Linda Miller developed a further use for the CAT system. She successfully translated a lecture live on the television screen and provided a transcript for students. This technique is known as Computer-Aided Real-time Translation, or CART. == Court reporter == It is the court reporter's job to note down the exact words spoken by every participants during a court or deposition proceeding. Then court reporters will provide verbatim transcripts. The reason to have an official court transcript is that the real-time transcriptions allows attorneys and judges to have immediate access to the transcript. It also helps when there's a need to look up for information from the proceeding. Additionally, the deaf and the hard-of-hearing communities can also participate in the judicial process with the help of real-time transcriptions provided by court reporters. === Education and training === The required degree level for a court reporter to have is an Associate's degree or postsecondary certificate. In order to become a court reporter, more than 150 reporter training programs are provided at proprietary schools, community colleges, and four-year universities. After graduation, court reporters can choose to further pursue certifications to achieve a higher level of expertise and increase their marketability during a job search. In most states, Certificates of Proficiency from the NCRA or from state agencies are now required certificates for court reporters to have in order to qualify for appointments. The NCRA aims to set the national standard for the certification of court reporters, and since 1937 it has offered its certification program which is now accepted by 22 states instead of state licenses. Court reporter training programs include but not limited to: Training in rapid writing skill, or shorthand, which will enable students to record, with accuracy, at least 225 words per minute Training in typing, which will enable students to type at least 60 words per minute A general training in English, which covers aspects of grammar, word formation, punctuation, spelling and capitalization Taking Law related courses in order to understand the overall principles of civil and criminal law, legal terminology and common Latin phrases, rules of evidence, court procedures, the duties of court reporters, the ethics of the profession Visits to actual trials Taking courses in elementary anatomy and physiology and medical word study including medical prefixes, roots and suffixes. Other than official court reporters, who are assigned to and work for a particular court, other types of court reporters include free-lance reporter, who either works for a court reporting firm or self-employed. They are different from official court reporters in that they have the chances to work on a wider range of assignments and work on basis of hourly wage. Hearing reporters work at governmental agency hearings. Legislative reporters work in law-making bodies. The demand for reporters is not limited in just the court settings. Reporters are also needed in conferences, meetings, conventions, investigations, and a variety of industries with needs for employers with real-time data entry skills. == Non-English transcription == Transcription services are universally necessary, so it is not limited to the English language. A stenographer's ability to transcribe languages beyond only English is especially valuable as society as a whole becomes increasingly multilingual. Education in non-English transcription demands a comprehensive understanding of the given language. Phonetic differences between English and other languages are a particular challenge in carrying English transcription skills over into other languages. Stenography represents various sounds of a language in a formal system of shorthand, so differences within the sets of sounds that emerge in other languages require an alternative system of shorthand transcription. For example, the presence of many diphthongs and triphthongs in Spanish requires certain sounds to be distinguished that would not be present in transcribing English into shorthand. == Controversies == The usage of transcription in the context of linguistic discussions has been controversial. Typically, two kinds of linguistic records are considered to be scientifically relevant. First, linguistic records of general acoustic features, and secondly, records that only focuses on the distinctive phonemes of a language. While transcriptions are not entirely illegitimate, transcriptions without enough detailed commentary regarding any linguistic features, or transcriptions of poor quality resources, has a great chance of the content being misinterpreted. Besides misinterpretation, transcribers could also bring in cultural biases and ignorance that reflect onto their transcription. These instances may cause a disruption of reliability in the final real-time transcription, which could influence how the written utterance is seen as an evidence for a court-case. === Quality issues === Problems in the final resulting transcription can be caused by either the quality of the transcriber or the original source that is being transcribed. Transcribers can come from different levels of skill and training background. This makes the final transcription prone to poor quality, or if the transcription is being done by multiple people, lack of consistency in the content. If the source of the transcription is a recording, the problem may root back to the quality of the re

  Read more →
• 

  Kernel (image processing)

  In image processing, a kernel, convolution matrix, or mask is a small matrix used for blurring, sharpening, embossing, edge detection, and more. This is accomplished by doing a convolution between the kernel and an image. Or more simply, when each pixel in the output image is a function of the nearby pixels (including itself) in the input image, the kernel is that function. == Details == The general expression of a convolution is g x , y = ω ∗ f x , y = ∑ i = − a a ∑ j = − b b ω i , j f x − i , y − j , {\displaystyle g_{x,y}=\omega f_{x,y}=\sum _{i=-a}^{a}{\sum _{j=-b}^{b}{\omega _{i,j}f_{x-i,y-j}}},} where g ( x , y ) {\displaystyle g(x,y)} is the filtered image, f ( x , y ) {\displaystyle f(x,y)} is the original image, ω {\displaystyle \omega } is the filter kernel. Every element of the filter kernel is considered by − a ≤ i ≤ a {\displaystyle -a\leq i\leq a} and − b ≤ j ≤ b {\displaystyle -b\leq j\leq b} . Depending on the element values, a kernel can cause a wide range of effects: The above are just a few examples of effects achievable by convolving kernels and images. === Origin === The origin is the position of the kernel which is above (conceptually) the current output pixel. This could be outside of the actual kernel, though usually it corresponds to one of the kernel elements. For a symmetric kernel, the origin is usually the center element. == Convolution == Convolution is the process of adding each element of the image to its local neighbors, weighted by the kernel. This is related to a form of mathematical convolution. The matrix operation being performed—convolution—is not traditional matrix multiplication, despite being similarly denoted by . For example, if we have two three-by-three matrices, the first a kernel, and the second an image piece, convolution is the process of flipping both the rows and columns of the kernel and multiplying locally similar entries and summing. The element at coordinates [2, 2] (that is, the central element) of the resulting image would be a weighted combination of all the entries of the image matrix, with weights given by the kernel: ( [ a b c d e f g h i ] ∗ [ 1 2 3 4 5 6 7 8 9 ] ) [ 2 , 2 ] = {\displaystyle \left({\begin{bmatrix}a&b&c\\d&e&f\\g&h&i\end{bmatrix}}{\begin{bmatrix}1&2&3\\4&5&6\\7&8&9\end{bmatrix}}\right)[2,2]=} ( i ⋅ 1 ) + ( h ⋅ 2 ) + ( g ⋅ 3 ) + ( f ⋅ 4 ) + ( e ⋅ 5 ) + ( d ⋅ 6 ) + ( c ⋅ 7 ) + ( b ⋅ 8 ) + ( a ⋅ 9 ) . {\displaystyle (i\cdot 1)+(h\cdot 2)+(g\cdot 3)+(f\cdot 4)+(e\cdot 5)+(d\cdot 6)+(c\cdot 7)+(b\cdot 8)+(a\cdot 9).} The other entries would be similarly weighted, where we position the center of the kernel on each of the boundary points of the image, and compute a weighted sum. The values of a given pixel in the output image are calculated by multiplying each kernel value by the corresponding input image pixel values. This can be described algorithmically with the following pseudo-code: for each image row in input image: for each pixel in image row: set accumulator to zero for each kernel row in kernel: for each element in kernel row: if element position corresponding to pixel position then multiply element value corresponding to pixel value add result to accumulator endif set output image pixel to accumulator corresponding input image pixels are found relative to the kernel's origin. If the kernel is symmetric then place the center (origin) of the kernel on the current pixel. The kernel will overlap the neighboring pixels around the origin. Each kernel element should be multiplied with the pixel value it overlaps with and all of the obtained values should be summed. This resultant sum will be the new value for the current pixel currently overlapped with the center of the kernel. If the kernel is not symmetric, it has to be flipped both around its horizontal and vertical axis before calculating the convolution as above. The general form for matrix convolution is [ x 11 x 12 ⋯ x 1 n x 21 x 22 ⋯ x 2 n ⋮ ⋮ ⋱ ⋮ x m 1 x m 2 ⋯ x m n ] ∗ [ y 11 y 12 ⋯ y 1 n y 21 y 22 ⋯ y 2 n ⋮ ⋮ ⋱ ⋮ y m 1 y m 2 ⋯ y m n ] = ∑ i = 0 m − 1 ∑ j = 0 n − 1 x ( m − i ) ( n − j ) y ( 1 + i ) ( 1 + j ) {\displaystyle {\begin{bmatrix}x_{11}&x_{12}&\cdots &x_{1n}\\x_{21}&x_{22}&\cdots &x_{2n}\\\vdots &\vdots &\ddots &\vdots \\x_{m1}&x_{m2}&\cdots &x_{mn}\\\end{bmatrix}}{\begin{bmatrix}y_{11}&y_{12}&\cdots &y_{1n}\\y_{21}&y_{22}&\cdots &y_{2n}\\\vdots &\vdots &\ddots &\vdots \\y_{m1}&y_{m2}&\cdots &y_{mn}\\\end{bmatrix}}=\sum _{i=0}^{m-1}\sum _{j=0}^{n-1}x_{(m-i)(n-j)}y_{(1+i)(1+j)}} === Edge handling === Kernel convolution usually requires values from pixels outside of the image boundaries. There are a variety of methods for handling image edges. Extend The nearest border pixels are conceptually extended as far as necessary to provide values for the convolution. Corner pixels are extended in 90° wedges. Other edge pixels are extended in lines. Wrap The image is conceptually wrapped (or tiled) and values are taken from the opposite edge or corner. Mirror The image is conceptually mirrored at the edges. For example, attempting to read a pixel 3 units outside an edge reads one 3 units inside the edge instead. Crop / Avoid overlap Any pixel in the output image which would require values from beyond the edge is skipped. This method can result in the output image being slightly smaller, with the edges having been cropped. Move kernel so that values from outside of image is never required. Machine learning mainly uses this approach. Example: Kernel size 10x10, image size 32x32, result image is 23x23. Kernel Crop Any pixel in the kernel that extends past the input image isn't used and the normalizing is adjusted to compensate. Constant Use constant value for pixels outside of image. Usually black or sometimes gray is used. Generally this depends on application. === Normalization === Normalization is defined as the division of each element in the kernel by the sum of all kernel elements, so that the sum of the elements of a normalized kernel is unity. This will ensure the average pixel in the modified image is as bright as the average pixel in the original image. === Optimization === Fast convolution algorithms include: separable convolution ==== Separable convolution ==== 2D convolution with an M × N kernel requires M × N multiplications for each sample (pixel). If the kernel is separable, then the computation can be reduced to M + N multiplications. Using separable convolutions can significantly decrease the computation by doing 1D convolution twice instead of one 2D convolution. === Implementation === Here a concrete convolution implementation done with the GLSL shading language :

  Read more →
• 

  Logogen model

  The logogen model of 1969 is a model of speech recognition that uses units called "logogens" to explain how humans comprehend spoken or written words. Logogens are a vast number of specialized recognition units, each able to recognize one specific word. This model provides for the effects of context on word recognition. == Overview == The word logogen can be traced back to the Greek-language word logos, which means "word", and genus, which means "birth". British scientist John Morton's logogen model was designed to explain word recognition using a new type of unit known as a logogen. A critical element of this theory is the involvement of lexicons, or specialized aspects of memory that include semantic and phonemic information about each item that is contained in memory. A given lexicon consists of many smaller, abstract items known as logogens. Logogens contain a variety of properties about given word such as their appearance, sound, and meaning. Logogens do not store words within themselves, but rather they store information that is specifically necessary for retrieval of whatever word is being searched for. A given logogen will become activated by psychological stimuli or contextual information (words) that is consistent with the properties of that specific logogen and when the logogen's activation level rises to or above its threshold level, the pronunciation of the given word is sent to the output system. Certain stimuli can affect the activation levels of more than one word at a time, usually involving words that are similar to one another. When this occurs, whichever of the words' activation levels reaches the threshold level, it is that word that is then sent to the output system with the subject remaining unaware of any partially excited logogens. This assumption was made by Marslen-Wilson and Welch (1978), who added to the model some assumptions of their own in order to account for their experimental results. They also assumed that the analysis of phonetic input can only become available to other parts of the system by process of how the input affects the logogen system. Finally, Marslen-Wilson and Welch assume that the first syllable of a given word will increase the activation level of a given logogen more than those of the latter syllables, which supported the data found at the time. == Analysis == The logogen model can be used to help linguists explain particular occurrences in the human language. The most-helpful application of the model is to show how one accesses words and their meanings in the lexicon. The word-frequency effect is best explained by the logogen model in that words (or logogens) that have a higher frequency (or are more common) have a lower threshold. This means that they require less perceptual power in the brain to be recognized and decoded from the lexicon and are recognized faster than those words that are less common. Also, with high-frequency words, the recovery from lowering the item's threshold is less fulfilled compared to low-frequency words so less sensory information is needed for that particular item's recognition. There are ways to lower thresholds, such as repetition and semantic priming. Also, each time a word is encountered through these methods, the threshold for that word is temporarily lowered partially because of its recovering ability. This model also conveys that specific concrete words are recalled better because they use images and logogens, whereas abstract words are not as easily recalled well because they only use logogens, hence showing the difference in thresholds between these two types of words. At the time of its conception, Morton's logogen model was one of the most influential models in springing up other parallel word access models and served as the essential basis for these subsequent models. Morton's model also strongly influenced other contemporary theories on lexical access. However, despite the advantages that the logogen theory presents, it also displays some negative facets. First and foremost, the logogen model does not explain all occurrences in language, such as the introduction of new words or non-words into a person's lexicon. Also, because of the distinctive model application, it may vary in its effectiveness in different languages. == Criticisms == While this model does a reasonable job of understanding the underlying semantics of many aspects in psycholinguistics, there are some flaws that have been pointed out in the logogen model. It has been argued that the prior stimulus patterns that have been seen in the logogen theory are not centrally localized in the logogen itself but are actually distributed throughout the different pathways over which the stimulus is being processed. What this directs at is that the notion and proliferation of logogens was due to modality. In essence, the logogen is unnecessary in the idea of attaining the title of being a recognition unit because of the variety of pathways that it is open to, not just logogens. Another criticism has been that this model essentially ignores larger and more critical structures in language and phonetics such as the different syntactic rules or grammatical construction that innately exists in language. Since this model overtly limits itself to the scope of lexical access then this model is seen as biased and misunderstood. To many psychologists, the logogen model does not meet the functional or representational adequacy that a theory should include to sufficiently comprehend language. Also, another criticism is that the logogen theory was supposed to predict that stimulus degradation should affect priming and word frequency in humans. However, many psychologists have conducted studies and researched the model to show that only priming and not word frequency is interacted with stimulus degradation. Priming is supposed to deteriorate a stimulus because it postulates that the semantic characteristics of previously known words are fed back into the detector of a person which in turn raises the threshold of related items. In word frequency, stimulus degradation is supposed to occur because it postulates that familiar words have lower thresholds than their low-frequency counterparts. However, in studies, priming is the only structure that does show observable and notable stimulus decadence. Even though the logogen theory has many unfilled holes, Morton was a revolutionary of his field whose speculation and research has opened up a remarkable era of psycholinguistics. == Other models to consider == cohort model – This model was proposed by Marslen-Wilson and was designed specifically to account for auditory word recognition. It works by breaking the word down and states that when a word is heard all words that begin with the first sound of the target word are activated. This set of words is considered the cohort. Once the first cohort has been activated, the other information, or sounds in the word narrow down the choices. The person recognizes the word when you are left with a single choice; this is considered the "recognition point". checking model – This model was developed by Norris in 1986. In this particular model, he took the approach that any word that partially matches the input is analyzed and checked to see if it fits with the context of the situation. interactive-activation model – This model is considered a connectionist model. Proposed by McClelland and Rumelhart in the 1981 to 1982 period, it is based around nodes, which are visual features, and positions of letters within a given word. They also act as word detectors which have inhibitory and excitatory connections between them. This model starts with first letter and suggests that all the words with that first letter are activated at first and then going through the word one can determine what the word is they are looking at. The main principle is that mental phenomena can be described by interconnected networks of simple units. verification model – The model was developed by Curtis Becker in 1970. The main idea is that a small number of candidates that are activated in parallel are subject to a serial-verification process. This model starts the word-recognition process with a basic representation of the stimulus. Then, sensory trace, consisting of line features is used to activate word detectors. When an acceptable number of detectors are activated these are used to generate a search set. These items are drawn from the lexicon on the basis of similarity to the sensory trace, which help with the identity of the stimulus. Then, in a serial process the candidates are compared to the representation of the sensory-trace input. == Related concepts == word frequency – This is the belief that the speed and accuracy with which a word is recognized is related to how frequently the word occurs in our language. Each logogen has a threshold (for identification) and words with higher frequencies have lower thresholds. Words with higher freq

  Read more →
• 

  Identi.ca

  identi.ca is a free and open-source social networking and blogging service based on the pump.io software, using the Activity Streams protocol. Identi.ca stopped accepting new registrations in 2013, but continues to operate alongside several other pump.io-based hosts provided by E14N which continue to accept new registrations. == Features == Identi.ca is similar to social networking sites like Facebook and Google+, allowing unlimited length status updates, rich text, and images. The Activity Streams protocol supports many kinds of activities such as games. OpenFarmGame is a prototype application for an Activity Streams-based game. Previous features from its StatusNet version such as hashtags, groups, and global search are not supported. == History == === StatusNet === The service received more than 8,000 registrations and 19,000 updates within the first 24 hours of publicly launching on July 2, 2008, and reached its 1,000,000th notice on November 4, 2008. In January 2009, identi.ca received investment funds from venture capital group Montreal Start Up. On March 30, 2009, Control Yourself (since renamed StatusNet Inc) announced that Identi.ca was to become part of a hosted microblogging service called status.net to be launched in May 2009. Status.net offers individual microblogs under a subdomain to be chosen by the customer. Identi.ca will remain a free service. All notices will be published under the Creative Commons Attribution 3.0 license by default, but paying customers will be free to choose a different license. Formerly based on StatusNet, a micro-blogging software package built on the OStatus specification (and earlier based on the OpenMicroBlogging specification), Identi.ca allowed users to send text updates (known as "notices") up to 140 characters long. While similar to Twitter in both concept and operation, Identi.ca/StatusNet provided many features not currently implemented by Twitter, including XMPP support and personal tag clouds. In addition, Identi.ca/StatusNet allowed free export and exchange of personal and "friend" data based on the FOAF standard; therefore, notices could be fed into a Twitter account or other service, and also ported in to a private system similar to Yammer. === pump.io === Developer Evan Prodromou chose to change the site to the pump.io software platform in development, because pump.io offers more features making it technically more advanced. Registration on Identi.ca was closed in December 2012 in preparation for the switch to pump.io software (the popularity of Identi.ca and "official" Status.net hosting were considered a hindrance to the creation of a federated social network). The conversion was completed on 12 July 2013. The 140 character per post limit was removed (in StatusNet, it was a setting, not an inherent limitation); now the blog posts can contain formatting and images. Groups, hashtags, and a page listing popular posts are not yet implemented in pump.io.

  Read more →
• 

  Graphics suite

  A graphics suite is a software suite for graphics work that are distributed together. The programs are usually able to interact with each other on a higher level than the operating system would normally allow. There is no hard, fast rule regarding the programs to be included in a graphics application suite, but most will include at least a bitmap graphics editor and a vector graphics editor. In addition to these, the suite may contain VRML editors, animation editors, and morphing tools.

  Read more →
• 

  Cooliris (plugin)

  Cooliris (for Desktop), formerly known as PicLens, was a web browser extension developed by Cooliris, Inc, and later acquired by Yahoo. The plugin provides an interactive 3D-like experience for viewing digital images and videos from the web and from desktop applications. The software places a small icon atop image thumbnails that appear on a webpage. Clicking on the icon loads the Cooliris 3D Wall, a browsing environment that gives the user the effect of flying through a three-dimensional space. Released to the public in January 2008, The New York Times described Cooliris as the "new immersive approach to Web navigation". Cooliris went out to win the 2008 Crunchies Award for Best Design. The plugin has received over 50 million downloads. As of May 2014 browser plugins are unavailable from the official website. There are only links to tablet apps - for iOS and Android.

  Read more →
• 

  Subvocal recognition

  Subvocal recognition (SVR) is the process of taking subvocalization and converting the detected results to a digital output, aural or text-based. A silent speech interface is a device that allows speech communication without using the sound made when people vocalize their speech sounds. It works by the computer identifying the phonemes that an individual pronounces from nonauditory sources of information about their speech movements. These are then used to recreate the speech using speech synthesis. == Input methods == Silent speech interface systems have been created using ultrasound and optical camera input of tongue and lip movements. Electromagnetic devices are another technique for tracking tongue and lip movements. The detection of speech movements by electromyography of speech articulator muscles and the larynx is another technique. Another source of information is the vocal tract resonance signals that get transmitted through bone conduction called non-audible murmurs. They have also been created as a brain–computer interface using brain activity in the motor cortex obtained from intracortical microelectrodes. == Uses == Such devices are created as aids to those unable to create the sound phonation needed for audible speech such as after laryngectomies. Another use is for communication when speech is masked by background noise or distorted by self-contained breathing apparatus. A further practical use is where a need exists for silent communication, such as when privacy is required in a public place, or hands-free data silent transmission is needed during a military or security operation. In 2002, the Japanese company NTT DoCoMo announced it had created a silent mobile phone using electromyography and imaging of lip movement. The company stated that "the spur to developing such a phone was ridding public places of noise," adding that, "the technology is also expected to help people who have permanently lost their voice." The feasibility of using silent speech interfaces for practical communication has since then been shown. In 2019, Arnav Kapur, a researcher from the Massachusetts Institute of Technology, conducted a study known as AlterEgo. Its implementation of the silent speech interface enables direct communication between the human brain and external devices through stimulation of the speech muscles. By leveraging neural signals associated with speech and language, the AlterEgo system deciphers the user's intended words and translates them into text or commands without the need for audible speech. == Research and patents == With a grant from the U.S. Army, research into synthetic telepathy using subvocalization is taking place at the University of California, Irvine under lead scientist Mike D'Zmura. NASA's Ames Research Laboratory in Mountain View, California, under the supervision of Charles Jorgensen is conducting subvocalization research. The Brain Computer Interface R&D program at Wadsworth Center under the New York State Department of Health has confirmed the existing ability to decipher consonants and vowels from imagined speech, which allows for brain-based communication using imagined speech, however using EEGs instead of subvocalization techniques. US Patents on silent communication technologies include: US Patent 6587729 "Apparatus for audibly communicating speech using the radio frequency hearing effect", US Patent 5159703 "Silent subliminal presentation system", US Patent 6011991 "Communication system and method including brain wave analysis and/or use of brain activity", US Patent 3951134 "Apparatus and method for remotely monitoring and altering brain waves". Latter two rely on brain wave analysis. == In fiction == The decoding of silent speech using a computer played an important role in Arthur C. Clarke's story and Stanley Kubrick's associated film A Space Odyssey. In this, HAL 9000, a computer controlling spaceship Discovery One, bound for Jupiter, discovers a plot to deactivate it by the mission astronauts Dave Bowman and Frank Poole through lip reading their conversations. In Orson Scott Card's series (including Ender's Game), the artificial intelligence can be spoken to while the protagonist wears a movement sensor in his jaw, enabling him to converse with the AI without making noise. He also wears an ear implant. In Speaker for the Dead and subsequent novels, author Orson Scott Card described an ear implant, called a "jewel", that allows subvocal communication with computer systems. Author Robert J. Sawyer made use of subvocal recognition to allow silent commands to the cybernetic 'companion implants' used by the advanced Neanderthal characters in his Neanderthal Parallax trilogy of science fiction novels. In Earth, David Brin depicts this technology and its uses as a normal gear in the near future. In Down and Out in the Magic Kingdom, Cory Doctorow has cellphone technology become silent through a cochlear implant and miking the throat to pick up subvocalization. William Gibson's Sprawl Trilogy frequently uses sub-vocalization systems in various devices. In Kage Baker's Company novels, the immortal cyborgs communicate subvocally. In the Hugo Award-winning Hyperion Cantos by Dan Simmons, the characters often use subvocalization to communicate. In the Culture novels by Iain M. Banks, more highly advanced species often communicate subvocally through their technology. In Deus Ex: Human Revolution (2011), the protagonist is augmented with a subvocalization implant for sending covert communications (and a corresponding cochlear implant for receiving covert communications). In the tabletop RPG and video game series Shadowrun, player characters can communicate via subvocal microphones in some instances. In Paranoia, all citizens can speak to the computer via their "cerebral cortech" implants. Alistair Reynolds Revelation Space trilogy frequently uses sub-vocalization systems in various devices.

  Read more →
• 

  SemEval

  SemEval (Semantic Evaluation) is an ongoing series of evaluations of computational semantic analysis systems; it evolved from the Senseval word sense evaluation series. The evaluations are intended to explore the nature of meaning in language. While meaning is intuitive to humans, transferring those intuitions to computational analysis has proved elusive. This series of evaluations provides a mechanism to characterize in more precise terms exactly what is necessary to compute in meaning. As such, the evaluations provide an emergent mechanism to identify the problems and solutions for computations with meaning. These exercises have evolved to articulate more of the dimensions that are involved in our use of language. They began with apparently simple attempts to identify word senses computationally. They have evolved to investigate the interrelationships among the elements in a sentence (e.g., semantic role labeling), relations between sentences (e.g., coreference), and the nature of what we are saying (semantic relations and sentiment analysis). The purpose of the SemEval and Senseval exercises is to evaluate semantic analysis systems. "Semantic Analysis" refers to a formal analysis of meaning, and "computational" refer to approaches that in principle support effective implementation. The first three evaluations, Senseval-1 through Senseval-3, were focused on word sense disambiguation (WSD), each time growing in the number of languages offered in the tasks and in the number of participating teams. Beginning with the fourth workshop, SemEval-2007 (SemEval-1), the nature of the tasks evolved to include semantic analysis tasks outside of word sense disambiguation. Triggered by the conception of the SEM conference, the SemEval community had decided to hold the evaluation workshops yearly in association with the SEM conference. It was also the decision that not every evaluation task will be run every year, e.g. none of the WSD tasks were included in the SemEval-2012 workshop. == History == === Early evaluation of algorithms for word sense disambiguation === From the earliest days, assessing the quality of word sense disambiguation algorithms had been primarily a matter of intrinsic evaluation, and “almost no attempts had been made to evaluate embedded WSD components”. Only very recently (2006) had extrinsic evaluations begun to provide some evidence for the value of WSD in end-user applications. Until 1990 or so, discussions of the sense disambiguation task focused mainly on illustrative examples rather than comprehensive evaluation. The early 1990s saw the beginnings of more systematic and rigorous intrinsic evaluations, including more formal experimentation on small sets of ambiguous words. === Senseval to SemEval === In April 1997, Martha Palmer and Marc Light organized a workshop entitled Tagging with Lexical Semantics: Why, What, and How? in conjunction with the Conference on Applied Natural Language Processing. At the time, there was a clear recognition that manually annotated corpora had revolutionized other areas of NLP, such as part-of-speech tagging and parsing, and that corpus-driven approaches had the potential to revolutionize automatic semantic analysis as well. Kilgarriff recalled that there was "a high degree of consensus that the field needed evaluation", and several practical proposals by Resnik and Yarowsky kicked off a discussion that led to the creation of the Senseval evaluation exercises. === SemEval's 3, 2 or 1 year(s) cycle === After SemEval-2010, many participants feel that the 3-year cycle is a long wait. Many other shared tasks such as Conference on Natural Language Learning (CoNLL) and Recognizing Textual Entailments (RTE) run annually. For this reason, the SemEval coordinators gave the opportunity for task organizers to choose between a 2-year or a 3-year cycle. The SemEval community favored the 3-year cycle. Although the votes within the SemEval community favored a 3-year cycle, organizers and coordinators had settled to split the SemEval task into 2 evaluation workshops. This was triggered by the introduction of the new SEM conference. The SemEval organizers thought it would be appropriate to associate our event with the SEM conference and collocate the SemEval workshop with the SEM conference. The organizers got very positive responses (from the task coordinators/organizers and participants) about the association with the yearly SEM, and 8 tasks were willing to switch to 2012. Thus was born SemEval-2012 and SemEval-2013. The current plan is to switch to a yearly SemEval schedule to associate it with the SEM conference but not every task needs to run every year. ==== List of Senseval and SemEval Workshops ==== Senseval-1 took place in the summer of 1998 for English, French, and Italian, culminating in a workshop held at Herstmonceux Castle, Sussex, England on September 2–4. Senseval-2 took place in the summer of 2001, and was followed by a workshop held in July 2001 in Toulouse, in conjunction with ACL 2001. Senseval-2 included tasks for Basque, Chinese, Czech, Danish, Dutch, English, Estonian, Italian, Japanese, Korean, Spanish and Swedish. Senseval-3 took place in March–April 2004, followed by a workshop held in July 2004 in Barcelona, in conjunction with ACL 2004. Senseval-3 included 14 different tasks for core word sense disambiguation, as well as identification of semantic roles, multilingual annotations, logic forms, subcategorization acquisition. SemEval-2007 (Senseval-4) took place in 2007, followed by a workshop held in conjunction with ACL in Prague. SemEval-2007 included 18 different tasks targeting the evaluation of systems for the semantic analysis of text. A special issue of Language Resources and Evaluation is devoted to the result. SemEval-2010 took place in 2010, followed by a workshop held in conjunction with ACL in Uppsala. SemEval-2010 included 18 different tasks targeting the evaluation of semantic analysis systems. SemEval-2012 took place in 2012; it was associated with the new SEM, First Joint Conference on Lexical and Computational Semantics, and co-located with NAACL, Montreal, Canada. SemEval-2012 included 8 different tasks targeting at evaluating computational semantic systems. However, there was no WSD task involved in SemEval-2012, the WSD related tasks were scheduled in the upcoming SemEval-2013. SemEval-2013 was associated with NAACL 2013, North American Association of Computational Linguistics, Georgia, USA and took place in 2013. It included 13 different tasks targeting at evaluating computational semantic systems. SemEval-2014 took place in 2014. It was co-located with COLING 2014, 25th International Conference on Computational Linguistics and SEM 2014, Second Joint Conference on Lexical and Computational Semantics, Dublin, Ireland. There were 10 different tasks in SemEval-2014 evaluating various computational semantic systems. SemEval-2015 took place in 2015. It was co-located with NAACL-HLT 2015, 2015 Conference of the North American Chapter of the Association for Computational Linguistics – Human Language Technologies and SEM 2015, Third Joint Conference on Lexical and Computational Semantics, Denver, USA. There were 17 different tasks in SemEval-2015 evaluating various computational semantic systems. == SemEval Workshop framework == The framework of the SemEval/Senseval evaluation workshops emulates the Message Understanding Conferences (MUCs) and other evaluation workshops ran by ARPA (Advanced Research Projects Agency, renamed the Defense Advanced Research Projects Agency (DARPA)). Stages of SemEval/Senseval evaluation workshops Firstly, all likely participants were invited to express their interest and participate in the exercise design. A timetable towards a final workshop was worked out. A plan for selecting evaluation materials was agreed. 'Gold standards' for the individual tasks were acquired, often human annotators were considered as a gold standard to measure precision and recall scores of computer systems. These 'gold standards' are what the computational systems strive towards. In WSD tasks, human annotators were set on the task of generating a set of correct WSD answers (i.e. the correct sense for a given word in a given context) The gold standard materials, without answers, were released to participants, who then had a short time to run their programs over them and return their sets of answers to the organizers. The organizers then scored the answers and the scores were announced and discussed at a workshop. == Semantic evaluation tasks == Senseval-1 & Senseval-2 focused on evaluation WSD systems on major languages that were available corpus and computerized dictionary. Senseval-3 looked beyond the lexemes and started to evaluate systems that looked into wider areas of semantics, such as Semantic Roles (technically known as Theta roles in formal semantics), Logic Form Transformation (commonly semantics of phrases, clauses or sentences were represented

  Read more →
• 

  VistaCreate

  VistaCreate (formerly Crello) is an online graphic design platform for non-designers, launched in 2016. As of 2022, it has more than 10 million users in 192 countries. == Overview == VistaCreate (then known as Crello) was launched in 2016 as a part of Depositphotos. In 2019, the product hit a milestone of 1 million registered users and also launched mobile apps. In 2020, the library of templates and objects became free. A music library and a background remover tool were added to the platform. In May 2021, Moufflons Basketball, in collaboration with VistaCreate, organized a poster design competition in support of gender equality in sports. In October 2021, Vistaprint acquired Crello and its parent company, Depositphotos, for a total price of $85 million. After the acquisition, Crello was rebranded to VistaCreate. Along with Vistaprint and 99designs, it became part of the new Vista parent brand. After Russia started a full-scale war on the territory of Ukraine in February 2022, VistaCreate suspended all business in Russia and Belarus. VistaCreate's team and Depositphotos gathered collections of images and templates dedicated to the war in Ukraine.

  Read more →
• 

  Dabbler

  Dabbler is natural media drawing software for beginners. It was initially developed by Fractal Design Corporation. It is a simplified version of Fractal Design Painter, and included multimedia tutorials and a fullscreen interface. Dabbler was released as "Art Dabbler" after the MetaCreations merger, and rights were eventually transferred to Corel. Dabbler operating systems are Mac OS and Microsoft Windows.

  Read more →