AI Email Id

AI Email Id — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

• 

  Pattern playback

  The pattern playback is an early talking device that was built by Dr. Franklin S. Cooper and his colleagues, including John M. Borst and Caryl Haskins, at Haskins Laboratories in the late 1940s and completed in 1950. There were several different versions of this hardware device. Only one currently survives. The machine converts pictures of the acoustic patterns of speech in the form of a spectrogram back into sound. Using this device, Alvin Liberman, Frank Cooper, and Pierre Delattre (later joined by Katherine Safford Harris, Leigh Lisker, and others) were able to discover acoustic cues for the perception of phonetic segments (consonants and vowels). This research was fundamental to the development of modern techniques of speech synthesis, reading machines for the blind, the study of speech perception and speech recognition, and the development of the motor theory of speech perception. To create sound, the pattern playback machine uses an arc light source which is directed against a rotating disk with 50 concentric tracks whose transparencies vary systematically in order to produce 50 harmonics of a fundamental frequency. The light is further projected against a spectrogram, whose reflectance corresponds to the sound pressure level of the partial of the signal, and is then directed towards a photovoltaic cell by which the light variation is converted into sound pressure variations. The pattern playback was last used in an experimental study by Robert Remez in 1976. The pattern playback now resides in the Museum at Haskins Laboratories in New Haven, Connecticut. The technique of pattern playback also now refers, more generally, to algorithms or techniques for converting spectrograms, cochleagrams, and correlograms from pictures back into sounds. A demonstration is in the TV show Adventure. Pioneering technology in psycholinguistics (CBS Television. 1953). == Digital pattern playback == In the 1970s, digital pattern playbacks began to supplant the earlier version. An early prototype was developed by Patrick Nye, Philip Rubin, and colleagues at Haskins Laboratories. It combined a "Ubiquitous Spectrum Analyzer"[1] for automatic spectral analysis, along with a VAX GT-40 display processor for graphic manipulation of the displayed spectrogram, a form of "synthesis by art", and subsequent re-synthesis using a 40 channel filter bank. This hybrid hardware/software digital pattern playback was eventually replaced at Haskins Laboratories by the HADES analysis and display system, designed by Philip Rubin, and implemented in Fortran on the VAX family of computers. A more modern version has been described by Arai and colleagues [2]. An on-line demonstration is available [3].

  Read more →
• 

  Proximal policy optimization

  Proximal policy optimization (PPO) is a reinforcement learning (RL) algorithm for training an intelligent agent. Specifically, it is a policy gradient method, often used for deep RL when the policy network is very large. == History == The predecessor to PPO, Trust Region Policy Optimization (TRPO), was published in 2015. It addressed the instability issue of another algorithm, the Deep Q-Network (DQN), by using the trust region method to limit the KL divergence between the old and new policies. However, TRPO uses the Hessian matrix (a matrix of second derivatives) to enforce the trust region, but the Hessian is inefficient for large-scale problems. PPO was published in 2017. It was essentially an approximation of TRPO that does not require computing the Hessian. The KL divergence constraint was approximated by simply clipping the policy gradient. Since 2018, PPO was the default RL algorithm at OpenAI. PPO has been applied to many areas, such as controlling a robotic arm, beating professional players at Dota 2 (OpenAI Five), and playing Atari games. == TRPO == TRPO, the predecessor of PPO, is an on-policy algorithm. It can be used for environments with either discrete or continuous action spaces. The pseudocode is as follows: Input: initial policy parameters θ 0 {\textstyle \theta _{0}} , initial value function parameters ϕ 0 {\textstyle \phi _{0}} Hyperparameters: KL-divergence limit δ {\textstyle \delta } , backtracking coefficient α {\textstyle \alpha } , maximum number of backtracking steps K {\textstyle K} for k = 0 , 1 , 2 , … {\textstyle k=0,1,2,\ldots } do Collect set of trajectories D k = { τ i } {\textstyle {\mathcal {D}}_{k}=\left\{\tau _{i}\right\}} by running policy π k = π ( θ k ) {\textstyle \pi _{k}=\pi \left(\theta _{k}\right)} in the environment. Compute rewards-to-go R ^ t {\textstyle {\hat {R}}_{t}} . Compute advantage estimates, A ^ t {\textstyle {\hat {A}}_{t}} (using any method of advantage estimation) based on the current value function V ϕ k {\textstyle V_{\phi _{k}}} . Estimate policy gradient as g ^ k = 1 | D k | ∑ τ ∈ D k ∑ t = 0 T ∇ θ log ⁡ π θ ( a t ∣ s t ) | θ k A ^ t {\displaystyle {\hat {g}}_{k}=\left.{\frac {1}{\left|{\mathcal {D}}_{k}\right|}}\sum _{\tau \in {\mathcal {D}}_{k}}\sum _{t=0}^{T}\nabla _{\theta }\log \pi _{\theta }\left(a_{t}\mid s_{t}\right)\right|_{\theta _{k}}{\hat {A}}_{t}} Use the conjugate gradient algorithm to compute x ^ k ≈ H ^ k − 1 g ^ k {\displaystyle {\hat {x}}_{k}\approx {\hat {H}}_{k}^{-1}{\hat {g}}_{k}} where H ^ k {\textstyle {\hat {H}}_{k}} is the Hessian of the sample average KL-divergence. Update the policy by backtracking line search with θ k + 1 = θ k + α j 2 δ x ^ k T H ^ k x ^ k x ^ k {\displaystyle \theta _{k+1}=\theta _{k}+\alpha ^{j}{\sqrt {\frac {2\delta }{{\hat {x}}_{k}^{T}{\hat {H}}_{k}{\hat {x}}_{k}}}}{\hat {x}}_{k}} where j ∈ { 0 , 1 , 2 , … K } {\textstyle j\in \{0,1,2,\ldots K\}} is the smallest value which improves the sample loss and satisfies the sample KL-divergence constraint. Fit value function by regression on mean-squared error: ϕ k + 1 = arg ⁡ min ϕ 1 | D k | T ∑ τ ∈ D k ∑ t = 0 T ( V ϕ ( s t ) − R ^ t ) 2 {\displaystyle \phi _{k+1}=\arg \min _{\phi }{\frac {1}{\left|{\mathcal {D}}_{k}\right|T}}\sum _{\tau \in {\mathcal {D}}_{k}}\sum _{t=0}^{T}\left(V_{\phi }\left(s_{t}\right)-{\hat {R}}_{t}\right)^{2}} typically via some gradient descent algorithm. == PPO == The pseudocode is as follows: Input: initial policy parameters θ 0 {\textstyle \theta _{0}} , initial value function parameters ϕ 0 {\textstyle \phi _{0}} for k = 0 , 1 , 2 , … {\textstyle k=0,1,2,\ldots } do Collect set of trajectories D k = { τ i } {\textstyle {\mathcal {D}}_{k}=\left\{\tau _{i}\right\}} by running policy π k = π ( θ k ) {\textstyle \pi _{k}=\pi \left(\theta _{k}\right)} in the environment. Compute rewards-to-go R ^ t {\textstyle {\hat {R}}_{t}} . Compute advantage estimates, A ^ t {\textstyle {\hat {A}}_{t}} (using any method of advantage estimation) based on the current value function V ϕ k {\textstyle V_{\phi _{k}}} . Update the policy by maximizing the PPO-Clip objective: θ k + 1 = arg ⁡ max θ 1 | D k | T ∑ τ ∈ D k ∑ t = 0 T min ( π θ ( a t ∣ s t ) π θ k ( a t ∣ s t ) A π θ k ( s t , a t ) , g ( ϵ , A π θ k ( s t , a t ) ) ) {\displaystyle \theta _{k+1}=\arg \max _{\theta }{\frac {1}{\left|{\mathcal {D}}_{k}\right|T}}\sum _{\tau \in {\mathcal {D}}_{k}}\sum _{t=0}^{T}\min \left({\frac {\pi _{\theta }\left(a_{t}\mid s_{t}\right)}{\pi _{\theta _{k}}\left(a_{t}\mid s_{t}\right)}}A^{\pi _{\theta _{k}}}\left(s_{t},a_{t}\right),\quad g\left(\epsilon ,A^{\pi _{\theta _{k}}}\left(s_{t},a_{t}\right)\right)\right)} typically via stochastic gradient ascent with Adam. Fit value function by regression on mean-squared error: ϕ k + 1 = arg ⁡ min ϕ 1 | D k | T ∑ τ ∈ D k ∑ t = 0 T ( V ϕ ( s t ) − R ^ t ) 2 {\displaystyle \phi _{k+1}=\arg \min _{\phi }{\frac {1}{\left|{\mathcal {D}}_{k}\right|T}}\sum _{\tau \in {\mathcal {D}}_{k}}\sum _{t=0}^{T}\left(V_{\phi }\left(s_{t}\right)-{\hat {R}}_{t}\right)^{2}} typically via some gradient descent algorithm. Like all policy gradient methods, PPO is used for training an RL agent whose actions are determined by a differentiable policy function by gradient ascent. Intuitively, a policy gradient method takes small policy update steps, so the agent can reach higher and higher rewards in expectation. Policy gradient methods may be unstable: A step size that is too big may direct the policy in a suboptimal direction, thus having little possibility of recovery; a step size that is too small lowers the overall efficiency. To solve the instability, PPO implements a clip function that constrains the policy update of an agent from being too large, so that larger step sizes may be used without negatively affecting the gradient ascent process. === Basic concepts === To begin the PPO training process, the agent is set in an environment to perform actions based on its current input. In the early phase of training, the agent can freely explore solutions and keep track of the result. Later, with a certain amount of transition samples and policy updates, the agent will select an action to take by randomly sampling from the probability distribution P ( A | S ) {\displaystyle P(A|S)} generated by the policy network. The actions that are most likely to be beneficial will have the highest probability of being selected from the random sample. After an agent arrives at a different scenario (a new state) by acting, it is rewarded with a positive reward or a negative reward. The objective of an agent is to maximize the cumulative reward signal across sequences of states, known as episodes. === Policy gradient laws: the advantage function === The advantage function (denoted as A {\displaystyle A} ) is central to PPO, as it tries to answer the question of whether a specific action of the agent is better or worse than some other possible action in a given state. By definition, the advantage function is an estimate of the relative value for a selected action. If the output of this function is positive, it means that the action in question is better than the average return, so the possibilities of selecting that specific action will increase. The opposite is true for a negative advantage output. The advantage function can be defined as A = Q − V {\displaystyle A=Q-V} , where Q {\displaystyle Q} is the discounted sum of rewards (the total weighted reward for the completion of an episode) and V {\displaystyle V} is the baseline estimate. Since the advantage function is calculated after the completion of an episode, the program records the outcome of the episode. Therefore, calculating advantage is essentially an unsupervised learning problem. The baseline estimate comes from the value function that outputs the expected discounted sum of an episode starting from the current state. In the PPO algorithm, the baseline estimate will be noisy (with some variance), as it also uses a neural network, like the policy function itself. With Q {\displaystyle Q} and V {\displaystyle V} computed, the advantage function is calculated by subtracting the baseline estimate from the actual discounted return. If A > 0 {\displaystyle A>0} , the actual return of the action is better than the expected return from experience; if A < 0 {\displaystyle A<0} , the actual return is worse. === Ratio function === In PPO, the ratio function ( r t {\displaystyle r_{t}} ) calculates the probability of selecting action a {\displaystyle a} in state s {\displaystyle s} given the current policy network, divided by the previous probability under the old policy. In other words: If r t ( θ ) > 1 {\displaystyle r_{t}(\theta )>1} , where θ {\displaystyle \theta } are the policy network parameters, then selecting action a {\displaystyle a} in state s {\displaystyle s} is more likely based on the current policy than the previous policy. If 0 ≤ r t ( θ ) < 1 {\displaystyle 0\leq r_{t}(\theta )<1} , then selecting actio

  Read more →
• 

  Minimum Population Search

  In evolutionary computation, Minimum Population Search (MPS) is a computational method that optimizes a problem by iteratively trying to improve a set of candidate solutions with regard to a given measure of quality. It solves a problem by evolving a small population of candidate solutions by means of relatively simple arithmetical operations. MPS is a metaheuristic as it makes few or no assumptions about the problem being optimized and can search very large spaces of candidate solutions. For problems where finding the precise global optimum is less important than finding an acceptable local optimum in a fixed amount of time, using a metaheuristic such as MPS may be preferable to alternatives such as brute-force search or gradient descent. MPS is used for multidimensional real-valued functions but does not use the gradient of the problem being optimized, which means MPS does not require for the optimization problem to be differentiable as is required by classic optimization methods such as gradient descent and quasi-newton methods. MPS can therefore also be used on optimization problems that are not even continuous, are noisy, change over time, etc. == Background == In a similar way to Differential evolution, MPS uses difference vectors between the members of the population in order to generate new solutions. It attempts to provide an efficient use of function evaluations by maintaining a small population size. If the population size is smaller than the dimensionality of the search space, then the solutions generated through difference vectors will be constrained to the n − 1 {\displaystyle n-1} dimensional hyperplane. A smaller population size will lead to a more restricted subspace. With a population size equal to the dimensionality of the problem ( n = d ) {\displaystyle (n=d)} , the “line/hyperplane points” in MPS will be generated within a d − 1 {\displaystyle d-1} dimensional hyperplane. Taking a step orthogonal to this hyperplane will allow the search process to cover all the dimensions of the search space. Population size is a fundamental parameter in the performance of population-based heuristics. Larger populations promote exploration, but they also allow fewer generations, and this can reduce the chance of convergence. Searching with a small population can increase the chances of convergence and the efficient use of function evaluations, but it can also induce the risk of premature convergence. If the risk of premature convergence can be avoided, then a population-based heuristic could benefit from the efficiency and faster convergence rate of a smaller population. To avoid premature convergence, it is important to have a diversified population. By including techniques for explicitly increasing diversity and exploration, it is possible to have smaller populations with less risk of premature convergence. === Thresheld Convergence === Thresheld Convergence (TC) is a diversification technique which attempts to separate the processes of exploration and exploitation. TC uses a “threshold” function to establish a minimum search step, and managing this step makes it possible to influence the transition from exploration to exploitation, convergence is thus “held” back until the last stages of the search process. The goal of a controlled transition is to avoid an early concentration of the population around a few search regions and avoid the loss of diversity which can cause premature convergence. Thresheld Convergence has been successfully applied to several population-based metaheuristics such as Particle Swarm Optimization, Differential evolution, Evolution strategies, Simulated annealing and Estimation of Distribution Algorithms. The ideal case for Thresheld Convergence is to have one sample solution from each attraction basin, and for each sample solution to have the same relative fitness with respect to its local optimum. Enforcing a minimum step aims to achieve this ideal case. In MPS Thresheld Convergence is specifically used to preserve diversity and avoid premature convergence by establishing a minimum search step. By disallowing new solutions which are too close to members of the current population, TC forces a strong exploration during the early stages of the search while preserving the diversity of the (small) population. == Algorithm == A basic variant of the MPS algorithm works by having a population of size equal to the dimension of the problem. New solutions are generated by exploring the hyperplane defined by the current solutions (by means of difference vectors) and performing an additional orthogonal step in order to avoid getting caught in this hyperplane. The step sizes are controlled by the Thresheld Convergence technique, which gradually reduces step sizes as the search process advances. An outline for the algorithm is given below: Generate the first initial population. Allowing these solutions to lie near the bounds of the search space generally gives good results: s k = ( r s 1 ∗ b o u n d 1 / 2 , r s 2 ∗ b o u n d 2 / 2 , . . . , r s n ∗ b o u n d n / 2 ) {\displaystyle s_{k}=(rs_{1}bound_{1}/2,rs_{2}bound_{2}/2,...,rs_{n}bound_{n}/2)} where s k {\displaystyle s_{k}} is the k {\displaystyle k} -th population member, r s i {\displaystyle rs_{i}} are random numbers which can be −1 or 1, and the b o u n d i {\displaystyle bound_{i}} are the lower and upper bounds on each dimension. While a stop condition is not reached: Update threshold convergence values ( m i n _ s t e p {\displaystyle min\_step} and m a x _ s t e p {\displaystyle max\_step} ) Calculate the centroid of the current population ( x c {\displaystyle x_{c}} ) For each member of the population ( x i {\displaystyle x_{i}} ), generate a new offspring as follows: Uniformly generate a scaling factor ( F i {\displaystyle F_{i}} ) between − m a x _ s t e p {\displaystyle -max\_step} and m a x _ s t e p {\displaystyle max\_step} Generate a vector ( x o {\displaystyle x_{o}} ) orthogonal to the difference vector between x i {\displaystyle x_{i}} and x c {\displaystyle x_{c}} Calculate a scaling factor for the orthogonal vector: m i n _ o r t h = s q r t ( m a x ( m i n _ s t e p 2 − F i 2 , 0 ) ) {\displaystyle min\_orth=sqrt(max(min\_step^{2}-F_{i}^{2},0))} m a x _ o r t h = s q r t ( m a x ( m a x _ s t e p 2 − F i 2 , 0 ) ) {\displaystyle max\_orth=sqrt(max(max\_step^{2}-F_{i}^{2},0))} o r t h _ s t e p = u n i f o r m ( m i n _ o r t h , m a x _ o r t h ) {\displaystyle orth\_step=uniform(min\_orth,max\_orth)} Generate the new solution by adding the difference and the orthogonal vectors to the original solution n e w _ s o l u t i o n = x i + F i ∗ ( x i − x c ) ∗ o r t h _ s t e p ∗ x o {\displaystyle new\_solution=x_{i}+F_{i}(x_{i}-x_{c})orth\_stepx_{o}} Pick the best members between the old population and the new one by discarding the least fit members. Return the single best solution or the best population found as the final result.

  Read more →
• 

  Witness set

  In combinatorics and computational learning theory, a witness set is a set of elements that distinguishes a given Boolean function from a given class of other Boolean functions. Let C {\displaystyle C} be a concept class over a domain X {\displaystyle X} (that is, a family of Boolean functions over X {\displaystyle X} ) and c {\displaystyle c} be a concept in X {\displaystyle X} (a single Boolean function). A subset S {\displaystyle S} of X {\displaystyle X} is a witness set for c {\displaystyle c} in X {\displaystyle X} if S {\displaystyle S} distinguishes c {\displaystyle c} from all the other functions in C {\displaystyle C} , in the sense that no other function in C {\displaystyle C} has the same values on S {\displaystyle S} . For a concept class with | C | {\displaystyle |C|} concepts, there exists a concept that has a witness of size at most log 2 ⁡ | C | {\displaystyle \log _{2}|C|} ; this bound is tight when C {\displaystyle C} consists of all Boolean functions over X {\displaystyle X} . By a result of Bondy (1972) there exists a single witness set of size at most | C | − 1 {\displaystyle |C|-1} that is valid for all concepts in C {\displaystyle C} ; this bound is tight when C {\displaystyle C} consists of the indicator functions of the empty set and some singleton sets. One way to construct this set is to interpret the concepts as bitstrings, and the domain elements as positions in these bitstrings. Then the set of positions at which a trie of the bitstrings branches forms the desired witness set. This construction is central to the operation of the fusion tree data structure. The minimum size of a witness set for c {\displaystyle c} is called the witness size or specification number and is denoted by w C ( c ) {\displaystyle w_{C}(c)} . The value max { w C ( c ) : c ∈ C } {\displaystyle \max\{w_{C}(c):c\in C\}} is called the teaching dimension of C {\displaystyle C} . It represents the number of examples of a concept that need to be presented by a teacher to a learner, in the worst case, to enable the learner to determine which concept is being presented. Witness sets have also been called teaching sets, keys, specifying sets, or discriminants. The "witness set" terminology is from Kushilevitz et al. (1996), who trace the concept of witness sets to work by Cover (1965).

  Read more →
• 

  BabyCenter

  BabyCenter is an online media company based in San Francisco, New York City, Chicago, and Los Angeles that provides information on conception, pregnancy, birth, and early childhood development for parents and expecting parents. BabyCenter operates 8 country and region specific properties including websites, apps, emails, print publications, and an online community where parents can connect on a variety of topics. The visitors of website and the users of the app can sign up for free weekly email newsletters that guide them through pregnancy and their child's development. In addition to publishing detailed, medically reviewed information about pregnancy and parenting, BabyCenter, under its Mission Motherhood initiative, ran numerous social programs and has participated in public health initiatives in partnership with hospitals, healthcare agencies, nonprofits, NGOs, and government agencies to provide pregnancy and parenting advice. It also annually publishes the most popular baby names. BabyCenter LLC is part of the Everyday Health Group, a division of Ziff Davis. == History == BabyCenter was founded in October 1997 by Stanford University MBA graduates Matt Glickman and Mark Selcow, who recognized a need for information about pregnancy and parenting on the internet. BabyCenter was initially funded through $13.5 million in startup capital funding from venture capital firms, including Bessemer Venture Partners, Intel, and Trinity Ventures. The funds were used to open the BabyCenter Store in October 1998. In the early years of its operation, BabyCenter offered multiple resources and services for parents, including a website that provided medically reviewed information and guidance to new and expectant parents on such topics as fertility, labor, and childcare; a weekly email for pregnant women tailored to their week of pregnancy (based on their pregnancy due date); and community groups and chat rooms for pregnant couples and parents to discuss pregnancy and child-rearing strategies. The site grew quickly, and by early 1999 had 175 employees and an annual revenue of $35 million. In April of that year, the two founders sold BabyCenter to another website, eToys.com, for $190 million in stock. Twenty-three months later, in 2001, shortly before declaring bankruptcy, eToys sold the site to Johnson & Johnson for $10 million. During the eToys ownership, BabyCenter launched its first international E-commerce site in the UK during the spring of 2000. Starting in 2005, BabyCenter launched an expansion plan, extending its global network to Australia, Canada and other countries, staffing each outpost with local editors. In 2007, BabyCenter debuted a Mandarin-language site in China, initiated operations in India, launched a Spanish language website, and introduced its first mobile site. BabyCenter released My Pregnancy Today, its first mobile app, to Apple's App Store in August 2010 and to the Android market in April 2011. The app provided daily information, nutrition tips, advice relevant to the user's week of pregnancy, and 3-D animated videos showcasing a baby's development in utero. The My Pregnancy app was joined by a My Baby Today app in October 2011. In 2015, BabyCenter released Mom Feed, its first mobile app for parents of toddlers and older children (ages 1 to 8). Mom Feed offered personalized, stage-based information as well as content from the BabyCenter Community and Blog in a real-time stream. In 2016, BabyCenter launched its web-based Baby Names Finder. In 2018, Mom Feed was discontinued and BabyCenter replaced that experience with a separate Child Health content area on its website. Also in 2018, BabyCenter launched its mobile baby name generator, the Baby Names app, which, like the web-based Baby Names Finder, leverages data from hundreds of thousands of parents that culminates in its annual most popular Baby Names Report. In 2019, Johnson & Johnson sold Baby Center to Everyday Health Group, a division of New York-based parent company of Ziff Davis, Inc. Neither side disclosed terms of the deal. == Popular research == BabyCenter's most popular baby names is released annually and often cited by the media. In March 2024, BabyCenter did a review of the app Temu and said that the website has found products that have been recalled, could be counterfeit or circumvent U.S. safety standards and features that are important in preventing issues like choking. In 2025, BabyCenter released a report about the cost of raising a newborn baby in the first year. == Content and products == === Websites === BabyCenter has 8 country and region-specific websites around the world, including sites for the United States, Canada, Australia, Brazil, India, Germany, the United Kingdom, and Latin America. Users can find parenting and pregnancy advice in seven languages: English, Spanish, Portuguese, Arabic, French, German, and Hindi BabyCenter content for each country- or region-specific site is written by an editorial team based in that country or region. Medical and health content for each site is reviewed by a medical advisory board based there and adheres to that country or region's medical standards. For example, the U.S. site works with and follows the recommendations of such U.S. medical authorities as the American Academy of Pediatrics, the American Congress of Obstetrics & Gynecology and the Society for Maternal-Fetal Medicine. BabyCenter regularly conducts research and provides thought leadership on pregnancy and parenting topics, popularly cited by major media outlets including The Wall Street Journal, Forbes, The Washington Post, BuzzFeed, Insider, MarketWatch, Axios. === Community, blogs and social === From its earliest days, BabyCenter has had a community area that allows people to join a group of parents with children born in the same month, known as a Birth Club. BabyCenter launched a blog called Momformation in 2007. Eventually, the name was changed to BabyCenter Blog. In April 2021, the BabyCenter Community was identified in a research article within the journal PLOS Computational Biology as facilitating "unobstructed communication" between parents, which avoids the "strong echo chamber phenomena" that can foster and perpetuate vaccine misinformation. === My Pregnancy and Baby Today App === The app is available in six languages, although not all features are supported for every market. Initially the apps only featured pregnancy articles that could be found on the BabyCenter website, but over the years the feature set has expanded to include a growing list of app-specific tools such as weekly fetal development information, a kick tracker, a birth plan worksheet, a contraction timer, a baby growth tracker, a photo journal for pregnant women to record their pregnancy bellies, and a photo journal for documenting a baby's first year. === Mission Motherhood™ === BabyCenter was a cofounder of the Mobile Alliance for Maternal Action (MAMA), a public-private partnership between USAID, Johnson & Johnson, the UN Foundation, and BabyCenter from 2011 to-to 2015. The MAMA program sparked the creation of MomConnect, an initiative of the South African Department of Health for which BabyCenter developed SMS messages with health information about pregnancy and a child's first year of life. BabyCenter helped develop similar messages for mMitra, a voice messaging program in India. A research article in the Maternal and Child Health Journal stated the mMitra program offered strong evidence "that tailored mobile phone voice messages can improve key infant care knowledge and practices that lead to improved infant health outcomes in low-resource settings. BabyCenter's Mission Motherhood Messages were available to qualifying organizations on the BabyCenter website. BabyCenter contributed websites for Free Basics. These websites featured age and stage-based pregnancy and baby articles targeted to low-income, lower-education women who would not otherwise have access to health information. Content developed for this program was also used to support a UNICEF SMS program during the 2016 Zika outbreak. == Awards and recognition == In 1998, BabyCenter won a Webby Award for Best Home Site. Since then, it has been nominated for a Webby Award 19 times and won either a Webby or a People's Choice Webby Award 12 times – including a People's Voice win in 2021 for Lifestyle websites and mobile sites. In 2002, it won Service Journalism award from Online Journalism Awards (OJA). In 2015, BabyCenter won five Digital Health Awards for content about autism in children. In 2016, BabyCenter won seven Digital Health Awards: four for videos about the aches and pains of pregnancy, baby sleep, and the walking milestone in child development; two for articles about baby sleep training and sleep apnea in babies; and one for the BabyCenter mobile app My Pregnancy & Baby Today. In 2021, Forbes Health chose My Pregnancy & Baby Today as the best pregnancy app of 2021, and Women's Health identified it

  Read more →
• 

  Ho–Kashyap algorithm

  The Ho–Kashyap algorithm is an iterative method in machine learning for finding a linear decision boundary that separates two linearly separable classes. It was developed by Yu-Chi Ho and Rangasami L. Kashyap in 1965, and usually presented as a problem in linear programming. == Setup == Given a training set consisting of samples from two classes, the Ho–Kashyap algorithm seeks to find a weight vector w {\displaystyle \mathbf {w} } and a margin vector b {\displaystyle \mathbf {b} } such that: Y w = b {\displaystyle \mathbf {Yw} =\mathbf {b} } where Y {\displaystyle \mathbf {Y} } is the augmented data matrix with samples from both classes (with appropriate sign conventions, e.g., samples from class 2 are negated), w {\displaystyle \mathbf {w} } is the weight vector to be determined, and b {\displaystyle \mathbf {b} } is a positive margin vector. The algorithm minimizes the criterion function: J ( w , b ) = | | Y w − b | | 2 {\displaystyle J(\mathbf {w} ,\mathbf {b} )=||\mathbf {Yw} -\mathbf {b} ||^{2}} subject to the constraint that b > 0 {\displaystyle \mathbf {b} >\mathbf {0} } (element-wise). Given a problem of linearly separating two classes, we consider a dataset of elements { ( x i , y i ) } i ∈ 1 : N {\displaystyle \{(\mathbf {x_{i}} ,y_{i})\}_{i\in 1:N}} where y i ∈ { − 1 , + 1 } {\displaystyle y_{i}\in \{-1,+1\}} . Linearly separating them by a perceptron is equivalent to finding weight and bias w , b {\displaystyle \mathbf {w} ,b} for a perceptron, such that: [ y 1 x 1 1 ⋮ ⋮ y N x N 1 ] [ w b ] > 0 {\displaystyle {\begin{bmatrix}y_{1}\mathbf {x} _{1}&1\\\vdots &\vdots \\y_{N}\mathbf {x} _{N}&1\\\end{bmatrix}}{\begin{bmatrix}\mathbf {w} \\b\end{bmatrix}}>0} == Algorithm == The idea of the Ho–Kashyap algorithm is as follows: Given any b {\displaystyle \mathbf {b} } , the corresponding w {\displaystyle \mathbf {w} } is known: It is simply w = Y + b {\displaystyle \mathbf {w} =\mathbf {Y} ^{+}\mathbf {b} } , where Y + {\displaystyle \mathbf {Y} ^{+}} denotes the Moore–Penrose pseudoinverse of Y {\displaystyle \mathbf {Y} } . Therefore, it only remains to find b {\displaystyle \mathbf {b} } by gradient descent. However, the gradient descent may sometimes decrease some of the coordinates of b {\displaystyle \mathbf {b} } , which may cause some coordinates of b {\displaystyle \mathbf {b} } to become negative, which is undesirable. Therefore, whenever some coordinates of b {\displaystyle \mathbf {b} } would have decreased, those coordinates are unchanged instead. As for the coordinates of b {\displaystyle \mathbf {b} } that would increase, those would increase without issue. Formally, the algorithm is as follows: Initialization: Set b ( 0 ) {\displaystyle \mathbf {b} (0)} to an arbitrary positive vector, typically b ( 0 ) = 1 {\displaystyle \mathbf {b} (0)=\mathbf {1} } (a vector of ones). Set the iteration counter k = 0 {\displaystyle k=0} . Set w ( 0 ) = Y + b ( 0 ) {\displaystyle \mathbf {w} (0)=\mathbf {Y} ^{+}\mathbf {b} (0)} Loop until convergence, or until iteration counter exceeds some k m a x {\displaystyle k_{max}} . Error calculation: Compute the error vector: e ( k ) = Y w ( k ) − b ( k ) {\displaystyle \mathbf {e} (k)=\mathbf {Yw} (k)-\mathbf {b} (k)} . Margin update: Update the margin vector: b ( k + 1 ) = b ( k ) + 2 η k ( e ( k ) + | e ( k ) | ) {\displaystyle \mathbf {b} (k+1)=\mathbf {b} (k)+2\eta _{k}(\mathbf {e} (k)+|\mathbf {e} (k)|)} where η k {\displaystyle \eta _{k}} is a positive learning rate parameter, and | e ( k ) | {\displaystyle |\mathbf {e} (k)|} denotes the element-wise absolute value. Weight calculation: Compute the weight vector using the pseudoinverse: w ( k + 1 ) = Y + b ( k + 1 ) {\displaystyle \mathbf {w} (k+1)=\mathbf {Y} ^{+}\mathbf {b} (k+1)} . Convergence check: If | | e ( k ) | | ≤ θ {\displaystyle ||\mathbf {e} (k)||\leq \theta } for some predetermined threshold θ {\displaystyle \theta } (close to zero), then return b ( k + 1 ) , w ( k + 1 ) {\displaystyle \mathbf {b} (k+1),\mathbf {w} (k+1)} . if e ( k ) ≤ 0 {\displaystyle \mathbf {e} (k)\leq \mathbf {0} } (all components non-positive), return "Samples not separable.". Return "Algorithm failed to converge in time.". == Properties == If the training data is linearly separable, the algorithm converges to a solution (where e ( k ) = 0 {\displaystyle \mathbf {e} (k)=\mathbf {0} } ) in a finite number of iterations. If the data is not linearly separable, the algorithm may or may not ever reach the point where e ( k ) = 0 {\displaystyle \mathbf {e} (k)=\mathbf {0} } . However, if it does happen that e ( k ) ≤ 0 {\displaystyle \mathbf {e} (k)\leq \mathbf {0} } at some iteration, this proves non-separability. The convergence rate depends on the choice of the learning rate parameter ρ {\displaystyle \rho } and the degree of linear separability of the data. == Relationship to other algorithms == Perceptron algorithm: Both seek linear separators. The perceptron updates weights incrementally based on individual misclassified samples, while Ho–Kashyap is a batch method that processes all samples to compute the pseudoinverse and updates based on an overall error vector. Linear discriminant analysis (LDA): LDA assumes underlying Gaussian distributions with equal covariances for the classes and derives the decision boundary from these statistical assumptions. Ho–Kashyap makes no explicit distributional assumptions and instead tries to solve a system of linear inequalities directly. Support vector machines (SVM): For linearly separable data, SVMs aim to find the maximum-margin hyperplane. The Ho–Kashyap algorithm finds a separating hyperplane but not necessarily the one with the maximum margin. If the data is not separable, soft-margin SVMs allow for some misclassifications by optimizing a trade-off between margin size and misclassification penalty, while Ho–Kashyap provides a least-squares solution. == Variants == Modified Ho–Kashyap algorithm changes weight calculation step w ( k + 1 ) = Y + b ( k + 1 ) {\displaystyle \mathbf {w} (k+1)=\mathbf {Y} ^{+}\mathbf {b} (k+1)} to w ( k + 1 ) = w ( k ) + η k Y + | e ( k ) | {\displaystyle \mathbf {w} (k+1)=\mathbf {w} (k)+\eta _{k}\mathbf {Y} ^{+}|\mathbf {e} (k)|} . Kernel Ho–Kashyap algorithm: Applies kernel methods (the "kernel trick") to the Ho–Kashyap framework to enable non-linear classification by implicitly mapping data to a higher-dimensional feature space.

  Read more →
• 

  Random indexing

  Random indexing is a dimensionality reduction method and computational framework for distributional semantics, based on the insight that very-high-dimensional vector space model implementations are impractical, that models need not grow in dimensionality when new items (e.g. new terminology) are encountered, and that a high-dimensional model can be projected into a space of lower dimensionality without compromising L2 distance metrics if the resulting dimensions are chosen appropriately. This is the original point of the random projection approach to dimension reduction first formulated as the Johnson–Lindenstrauss lemma, and locality-sensitive hashing has some of the same starting points. Random indexing, as used in representation of language, originates from the work of Pentti Kanerva on sparse distributed memory, and can be described as an incremental formulation of a random projection. It can be also verified that random indexing is a random projection technique for the construction of Euclidean spaces—i.e. L2 normed vector spaces. In Euclidean spaces, random projections are elucidated using the Johnson–Lindenstrauss lemma. The TopSig technique extends the random indexing model to produce bit vectors for comparison with the Hamming distance similarity function. It is used for improving the performance of information retrieval and document clustering. In a similar line of research, Random Manhattan Integer Indexing (RMII) is proposed for improving the performance of the methods that employ the Manhattan distance between text units. Many random indexing methods primarily generate similarity from co-occurrence of items in a corpus. Reflexive Random Indexing (RRI) generates similarity from co-occurrence and from shared occurrence with other items.

  Read more →
• 

  Dispersive flies optimisation

  Dispersive flies optimisation (DFO) is a bare-bones swarm intelligence algorithm which is inspired by the swarming behaviour of flies hovering over food sources. DFO is a simple optimiser which works by iteratively trying to improve a candidate solution with regard to a numerical measure that is calculated by a fitness function. Each member of the population, a fly or an agent, holds a candidate solution whose suitability can be evaluated by their fitness value. Optimisation problems are often formulated as either minimisation or maximisation problems. DFO was introduced with the intention of analysing a simplified swarm intelligence algorithm with the fewest tunable parameters and components. In the first work on DFO, this algorithm was compared against a few other existing swarm intelligence techniques using error, efficiency and diversity measures. It is shown that despite the simplicity of the algorithm, which only uses agents’ position vectors at time t to generate the position vectors for time t + 1, it exhibits a competitive performance. Since its inception, DFO has been used in a variety of applications including medical imaging and image analysis as well as data mining and machine learning. == Algorithm == DFO bears many similarities with other existing continuous, population-based optimisers (e.g. particle swarm optimization and differential evolution). In that, the swarming behaviour of the individuals consists of two tightly connected mechanisms, one is the formation of the swarm and the other is its breaking or weakening. DFO works by facilitating the information exchange between the members of the population (the swarming flies). Each fly x {\displaystyle \mathbf {x} } represents a position in a d-dimensional search space: x = ( x 1 , x 2 , … , x d ) {\displaystyle \mathbf {x} =(x_{1},x_{2},\ldots ,x_{d})} , and the fitness of each fly is calculated by the fitness function f ( x ) {\displaystyle f(\mathbf {x} )} , which takes into account the flies' d dimensions: f ( x ) = f ( x 1 , x 2 , … , x d ) {\displaystyle f(\mathbf {x} )=f(x_{1},x_{2},\ldots ,x_{d})} . The pseudocode below represents one iteration of the algorithm: for i = 1 : N flies x i . fitness = f ( x i ) {\displaystyle \mathbf {x_{i}} .{\text{fitness}}=f(\mathbf {x} _{i})} end for i x s {\displaystyle \mathbf {x} _{s}} = arg min [ f ( x i ) ] , i ∈ { 1 , … , N } {\textstyle [f(\mathbf {x} _{i})],\;i\in \{1,\ldots ,N\}} for i = 1 : N and i ≠ s {\displaystyle i\neq s} for d = 1 : D dimensions if U ( 0 , 1 ) < Δ {\displaystyle U(0,1)<\Delta } x i d t + 1 = U ( x min , d , x max , d ) {\displaystyle x_{id}^{t+1}=U(x_{\min ,d},x_{\max ,d})} else x i d t + 1 = x i n d t + U ( 0 , 1 ) ( x s d t − x i d t ) {\displaystyle x_{id}^{t+1}=x_{i_{nd}}^{t}+U(0,1)(x_{sd}^{t}-x_{id}^{t})} end if end for d end for i In the algorithm above, x i d t + 1 {\displaystyle x_{id}^{t+1}} represents fly i {\displaystyle i} at dimension d {\displaystyle d} and time t + 1 {\displaystyle t+1} ; x i n d t {\displaystyle x_{i_{nd}}^{t}} presents x i {\displaystyle x_{i}} 's best neighbouring fly in ring topology (left or right, using flies indexes), at dimension d {\displaystyle d} and time t {\displaystyle t} ; and x s d t {\displaystyle x_{sd}^{t}} is the swarm's best fly. Using this update equation, the swarm's population update depends on each fly's best neighbour (which is used as the focus μ {\displaystyle \mu } , and the difference between the current fly and the best in swarm represents the spread of movement, σ {\displaystyle \sigma } ). Other than the population size N {\displaystyle N} , the only tunable parameter is the disturbance threshold Δ {\displaystyle \Delta } , which controls the dimension-wise restart in each fly vector. This mechanism is proposed to control the diversity of the swarm. Other notable minimalist swarm algorithm is Bare bones particle swarms (BB-PSO), which is based on particle swarm optimisation, along with bare bones differential evolution (BBDE) which is a hybrid of the bare bones particle swarm optimiser and differential evolution, aiming to reduce the number of parameters. Alhakbani in her PhD thesis covers many aspects of the algorithms including several DFO applications in feature selection as well as parameter tuning. == Applications == Some of the recent applications of DFO are listed below: Optimising support vector machine kernel to classify imbalanced data Quantifying symmetrical complexity in computational aesthetics Analysing computational autopoiesis and computational creativity Identifying calcifications in medical images Building non-identical organic structures for game's space development Deep Neuroevolution: Training Deep Neural Networks for False Alarm Detection in Intensive Care Units Identification of animation key points from 2D-medialness maps

  Read more →
• 

  CineAsset

  CineAsset was a complete mastering software suite by Doremi Labs that could create and playback encrypted (Pro version) and unencrypted DCI compliant packages from virtually any source. CineAsset included a separate "Editor" application for generating Digital Cinema Packages (DCPs). CineAsset Pro added the ability to generate encrypted DCPs and Key Delivery Messages (KDMs) for any encrypted content in the database. It has since been discontinued, along with CineAsset Player. == Features == == Supported formats == === Input === Source: ==== Containers ==== AVI MOV MXF MPG TS WMV M2TS MTS MP4 MKV ==== Video Codecs ==== JPEG2000 ProRes 422 DNxHD® YUV Uncompressed 8-10 bits DIVX® XVID® MPEG4 AVC / H-264 VC-1 MPEG2 ==== Image Sequences ==== BMP TIFF TGA DPX JPG J2C ==== Audio Files ==== WAV MP3 WMA MP2 === Output === Source: ==== JPEG2000 ==== 2D and 3D at up to 4K resolution Bit Rate: 50–250 Mbit/s (500 Mbit/s for frame rates above 30 fps) Speed: Faster than real-time processing when using optional render nodes ==== MPEG2 ==== I-Only or Long GOP 1080p up to 80 Mbit/s ==== H264 ==== 1080p up to 50 Mbit/s ==== VC1 ==== DCP wrapping only (no transcode)

  Read more →
• 

  Reservoir computing

  Reservoir computing is a framework for computation derived from recurrent neural network theory that maps input signals into higher dimensional computational spaces through the dynamics of a fixed, non-linear system called a reservoir. After the input signal is fed into the reservoir, which is treated as a "black box," a simple readout mechanism is trained to read the state of the reservoir and map it to the desired output. The first key benefit of this framework is that training is performed only at the readout stage, as the reservoir dynamics are fixed. The second is that the computational power of naturally available systems, both classical and quantum mechanical, can be used to reduce the effective computational cost. == History == The first examples of reservoir neural networks demonstrated that randomly connected recurrent neural networks could be used for sensorimotor sequence learning, and simple forms of interval and speech discrimination. In these early models the memory in the network took the form of both short-term synaptic plasticity and activity mediated by recurrent connections. In other early reservoir neural network models the memory of the recent stimulus history was provided solely by the recurrent activity. Overall, the general concept of reservoir computing stems from the use of recursive connections within neural networks to create a complex dynamical system. It is a generalisation of earlier neural network architectures such as recurrent neural networks, liquid-state machines and echo-state networks. Reservoir computing also extends to physical systems that are not networks in the classical sense, but rather continuous systems in space and/or time: e.g. a literal "bucket of water" can serve as a reservoir that performs computations on inputs given as perturbations of the surface. The resultant complexity of such recurrent neural networks was found to be useful in solving a variety of problems including language processing and dynamic system modeling. However, training of recurrent neural networks is challenging and computationally expensive. Reservoir computing reduces those training-related challenges by fixing the dynamics of the reservoir and only training the linear output layer. A large variety of nonlinear dynamical systems can serve as a reservoir that performs computations. In recent years semiconductor lasers have attracted considerable interest as computation can be fast and energy efficient compared to electrical components. Recent advances in both AI and quantum information theory have given rise to the concept of quantum neural networks. These hold promise in quantum information processing, which is challenging to classical networks, but can also find application in solving classical problems. In 2018, a physical realization of a quantum reservoir computing architecture was demonstrated in the form of nuclear spins within a molecular solid. However, the nuclear spin experiments in did not demonstrate quantum reservoir computing per se as they did not involve processing of sequential data. Rather the data were vector inputs, which makes this more accurately a demonstration of quantum implementation of a random kitchen sink algorithm (also going by the name of extreme learning machines in some communities). In 2019, another possible implementation of quantum reservoir processors was proposed in the form of two-dimensional fermionic lattices. In 2020, realization of reservoir computing on gate-based quantum computers was proposed and demonstrated on cloud-based IBM superconducting near-term quantum computers. Reservoir computers have been used for time-series analysis purposes. In particular, some of their usages involve chaotic time-series prediction, separation of chaotic signals, and link inference of networks from their dynamics. == Classical reservoir computing == === Reservoir === The 'reservoir' in reservoir computing is the internal structure of the computer, and must have two properties: it must be made up of individual, non-linear units, and it must be capable of storing information. The non-linearity describes the response of each unit to input, which is what allows reservoir computers to solve complex problems. Reservoirs are able to store information by connecting the units in recurrent loops, where the previous input affects the next response. The change in reaction due to the past allows the computers to be trained to complete specific tasks. Reservoirs can be virtual or physical. Virtual reservoirs are typically randomly generated and are designed like neural networks. Virtual reservoirs can be designed to have non-linearity and recurrent loops, but, unlike neural networks, the connections between units are randomized and remain unchanged throughout computation. Physical reservoirs are possible because of the inherent non-linearity of certain natural systems. The interaction between ripples on the surface of water contains the nonlinear dynamics required in reservoir creation, and a pattern recognition RC was developed by first inputting ripples with electric motors then recording and analyzing the ripples in the readout. === Readout === The readout is a neural network layer that performs a linear transformation on the output of the reservoir. The weights of the readout layer are trained by analyzing the spatiotemporal patterns of the reservoir after excitation by known inputs, and by utilizing a training method such as a linear regression or a Ridge regression. As its implementation depends on spatiotemporal reservoir patterns, the details of readout methods are tailored to each type of reservoir. For example, the readout for a reservoir computer using a container of liquid as its reservoir might entail observing spatiotemporal patterns on the surface of the liquid. === Types === ==== Context reverberation network ==== An early example of reservoir computing was the context reverberation network. In this architecture, an input layer feeds into a high dimensional dynamical system which is read out by a trainable single-layer perceptron. Two kinds of dynamical system were described: a recurrent neural network with fixed random weights, and a continuous reaction–diffusion system inspired by Alan Turing's model of morphogenesis. At the trainable layer, the perceptron associates current inputs with the signals that reverberate in the dynamical system; the latter were said to provide a dynamic "context" for the inputs. In the language of later work, the reaction–diffusion system served as the reservoir. ==== Echo state network ==== The tree echo state network (TreeESN) model represents a generalization of the reservoir computing framework to tree structured data. ==== Liquid-state machine ==== Chaotic liquid state machine The liquid (i.e. reservoir) of a chaotic liquid state machine (CLSM), or chaotic reservoir, is made from chaotic spiking neurons but which stabilize their activity by settling to a single hypothesis that describes the trained inputs of the machine. This is in contrast to general types of reservoirs that don't stabilize. The liquid stabilization occurs via synaptic plasticity and chaos control that govern neural connections inside the liquid. CLSM showed promising results in learning sensitive time series data. ==== Nonlinear transient computation ==== This type of information processing is most relevant when time-dependent input signals depart from the mechanism's internal dynamics. These departures cause transients or temporary altercations which are represented in the device's output. ==== Deep reservoir computing ==== The extension of the reservoir computing framework towards deep learning, with the introduction of deep reservoir computing and of the deep echo state network (DeepESN) model allows to develop efficiently trained models for hierarchical processing of temporal data, at the same time enabling the investigation on the inherent role of layered composition in recurrent neural networks. == Quantum reservoir computing == Quantum reservoir computing may use the nonlinear nature of quantum mechanical interactions or processes to form the characteristic nonlinear reservoirs but may also be done with linear reservoirs when the injection of the input to the reservoir creates the nonlinearity. The marriage of machine learning and quantum devices is leading to the emergence of quantum neuromorphic computing as a new research area. === Types === ==== Gaussian states of interacting quantum harmonic oscillators ==== Gaussian states are a paradigmatic class of states of continuous variable quantum systems. Although they can nowadays be created and manipulated in, e.g, state-of-the-art optical platforms, naturally robust to decoherence, it is well-known that they are not sufficient for, e.g., universal quantum computing because transformations that preserve the Gaussian nature of a state are linear. Normally, linear dynamics would not be sufficient for nontrivial reser

  Read more →
• 

  IBM Watsonx

  Watsonx is a platform by IBM for building and managing artificial intelligence (AI) applications for business use. Released on May 9, 2023, the platform provides software tools and infrastructure for companies to work with both IBM's own AI models and models from third-party sources. The platform consists of three main components: watsonx.ai, a studio for training, validating, and deploying AI models; watsonx.data, a system for storing and managing data used by the models; and watsonx.governance, a toolkit to ensure AI applications are compliant with company policies and regulations. A key feature of the platform is that it can be trained on a company's private data to perform specialized tasks, a process known as fine-tuning. IBM states that this client-specific data is not used to train its own models. == History == Watsonx was introduced on May 9, 2023, at the annual IBM Think conference, as a platform that includes multiple services. Just like Watson AI computer with the similar name, Watsonx was named after Thomas J. Watson, IBM's founder and first CEO. On February 13, 2024, Anaconda partnered with IBM to embed its open-source Python packages into Watsonx. Watsonx is used at ESPN's Fantasy Football App for managing players' performance, and by Italian telecommunications company Wind Tre. It was employed to generate editorial content around nominees during the 66th Annual Grammy Awards. In 2025, Wimbledon integrated IBM watsonx generative AI into its app and website. Integrated with IBM Safer Payments, IBM watsonx has been used in banking sector fraud detection and anti-money laundering (AML) systems. == Services == === watsonx.ai === Watsonx.ai is a platform that allows AI developers to leverage a wide range of LLMs under IBM's own Granite series and others such as Facebook's LLaMA-2, free and open-source model Mistral, and many others present in the Hugging Face community. These models come pre-trained and optimized for various natural language processing (NLP) applications.The platform also allows fine-tuning with its Tuning Studio. === watsonx.data === Watsonx.data is a platform designed to assist clients in addressing issues related to data volume, complexity, cost, and governance.. The platform facilitates seamless data access, whether stored in the cloud or on-premises, through a single entry point. === watsonx.governance === Watsonx.governance is a platform that utilizes IBM's AI capabilities to implement AI lifecycle governance. This helps them manage risks and maintain compliance with evolving AI and industry regulations, while reducing AI bias through automated oversight.

  Read more →
• 

  Rprop

  Rprop, short for resilient backpropagation, is a learning heuristic for supervised learning in feedforward artificial neural networks. This is a first-order optimization algorithm. This algorithm was created by Martin Riedmiller and Heinrich Braun in 1992. Similarly to the Manhattan update rule, Rprop takes into account only the sign of the partial derivative over all patterns (not the magnitude), and acts independently on each "weight". For each weight, if there was a sign change of the partial derivative of the total error function compared to the last iteration, the update value for that weight is multiplied by a factor η−, where η− < 1. If the last iteration produced the same sign, the update value is multiplied by a factor of η+, where η+ > 1. The update values are calculated for each weight in the above manner, and finally each weight is changed by its own update value, in the opposite direction of that weight's partial derivative, so as to minimise the total error function. η+ is empirically set to 1.2 and η− to 0.5. Rprop can result in very large weight increments or decrements if the gradients are large, which is a problem when using mini-batches as opposed to full batches. RMSprop addresses this problem by keeping the moving average of the squared gradients for each weight and dividing the gradient by the square root of the mean square. RPROP is a batch update algorithm. Next to the cascade correlation algorithm and the Levenberg–Marquardt algorithm, Rprop is one of the fastest weight update mechanisms. == Variations == Martin Riedmiller developed three algorithms, all named RPROP. Igel and Hüsken assigned names to them and added a new variant: RPROP+ is defined at A Direct Adaptive Method for Faster Backpropagation Learning: The RPROP Algorithm. RPROP− is defined at Advanced Supervised Learning in Multi-layer Perceptrons – From Backpropagation to Adaptive Learning Algorithms. Backtracking is removed from RPROP+. iRPROP− is defined in Rprop – Description and Implementation Details and was reinvented by Igel and Hüsken. This variant is very popular and most simple. iRPROP+ is defined at Improving the Rprop Learning Algorithm and is very robust and typically faster than the other three variants.

  Read more →
• 

  Vulnerabilities Equities Process

  The Vulnerabilities Equities Process (VEP) is a process used by the U.S. federal government to determine on a case-by-case basis how it should treat zero-day computer security vulnerabilities: whether to disclose them to the public to help improve general computer security, or to keep them secret for offensive use against the government's adversaries. The VEP was first developed during the period 2008–2009, but only became public in 2016, when the government released a redacted version of the VEP in response to a FOIA request by the Electronic Frontier Foundation. Following public pressure for greater transparency in the wake of the Shadow Brokers affair, the U.S. government made a more public disclosure of the VEP process in November 2017. == Participants == According to the VEP plan published in 2017, the Equities Review Board (ERB) is the primary forum for interagency deliberation and determinations concerning the VEP. The ERB meets monthly, but may also be convened sooner if an immediate need arises. The ERB consists of representatives from the following agencies: Office of Management and Budget Office of the Director of National Intelligence (including the Intelligence Community-Security Coordination Center) United States Department of the Treasury United States Department of State United States Department of Justice (including the Federal Bureau of Investigation and the National Cyber Investigative Joint Task Force) Department of Homeland Security (including the National Cybersecurity and Communications Integration Center and the United States Secret Service) United States Department of Energy United States Department of Defense (to include the National Security Agency, including Information Assurance and Signals Intelligence elements), United States Cyber Command, and DoD Cyber Crime Center) United States Department of Commerce Central Intelligence Agency The National Security Agency serves as the executive secretariat for the VEP. == Process == According to the November 2017 version of the VEP, the process is as follows: === Submission and notification === When an agency finds a vulnerability, it will notify the VEP secretariat as soon as is possible. The notification will include a description of the vulnerability and the vulnerable products or systems, together with the agency's recommendation to either disseminate or restrict the vulnerability information. The secretariat will then notify all participants of the submission within one business day, requesting them to respond if they have an relevant interest. === Equity and discussions === An agency expressing an interest must indicate whether it concurs with the original recommendation to disseminate or restrict within five business days. If it does not, it will hold discussions with the submitting agency and the VEP secretariat within seven business days to attempt to reach consensus. If no consensus is reached, the participants will suggest options for the Equities Review Board. === Determination to disseminate or restrict === Decisions whether to disclose or restrict a vulnerability should be made quickly, in full consultation with all concerned agencies, and in the overall best interest of the competing interests of the missions of the U.S. government. As far as possible, determinations should be based on rational, objective methodologies, taking into account factors such as prevalence, reliance, and severity. If the review board members cannot reach consensus, they will vote on a preliminary determination. If an agency with an equity disputes that decision, they may, by providing notice to the VEP secretariat, elect to contest the preliminary determination. If no agency contests a preliminary determination, it will be treated as a final decision. === Handling and follow-on actions === If vulnerability information is released, this will be done as quickly as possible, preferably within seven business days. Disclosure of vulnerabilities will be conducted according to guidelines agreed on by all members. The submitting agency is presumed to be most knowledgeable about the vulnerability and, as such, will be responsible for disseminating vulnerability information to the vendor. The submitting agency may elect to delegate dissemination responsibility to another agency on its behalf. The releasing agency will promptly provide a copy of the disclosed information to the VEP secretariat for record keeping. Additionally, the releasing agency is expected to follow up so the ERB can determine whether the vendor's action meets government requirements. If the vendor chooses not to address a vulnerability, or is not acting with urgency consistent with the risk of the vulnerability, the releasing agency will notify the secretariat, and the government may take other mitigation steps. == Criticism == The VEP process has been criticized for a number of deficiencies, including restriction by non-disclosure agreements, lack of risk ratings, special treatment for the NSA, and less than whole-hearted commitment to disclosure as the default option. == UK equivalent == British intelligence agencies—GCHQ in particular—follow a similar approach, also known as the Equities Process, to determine whether to disclose or retain security vulnerabilities. The Investigatory Powers Act 2016 was amended in 2022 to bring oversight of the operation of the process within the remit of the Investigatory Powers Commissioner. Details of the process were made public in 2018.

  Read more →
• 

  Margin classifier

  In machine learning (ML), a margin classifier is a type of classification model which is able to give an associated distance from the decision boundary for each data sample. For instance, if a linear classifier is used, the distance (typically Euclidean, though others may be used) of a sample from the separating hyperplane is the margin of that sample. The notion of margins is important in several ML classification algorithms, as it can be used to bound the generalization error of these classifiers. These bounds are frequently shown using the VC dimension. The generalization error bound in boosting algorithms and support vector machines is particularly prominent. == Margin for boosting algorithms == The margin for an iterative boosting algorithm given a dataset with two classes can be defined as follows: the classifier is given a sample pair ( x , y ) {\displaystyle (x,y)} , where x ∈ X {\displaystyle x\in X} is a domain space and y ∈ Y = { − 1 , + 1 } {\displaystyle y\in Y=\{-1,+1\}} is the sample's label. The algorithm then selects a classifier h j ∈ C {\displaystyle h_{j}\in C} at each iteration j {\displaystyle j} where C {\displaystyle C} is a space of possible classifiers that predict real values. This hypothesis is then weighted by α j ∈ R {\displaystyle \alpha _{j}\in R} as selected by the boosting algorithm. At iteration t {\displaystyle t} , the margin of a sample x {\displaystyle x} can thus be defined as y ∑ j t α j h j ( x ) ∑ | α j | . {\displaystyle {\frac {y\sum _{j}^{t}\alpha _{j}h_{j}(x)}{\sum |\alpha _{j}|}}.} By this definition, the margin is positive if the sample is labeled correctly, or negative if the sample is labeled incorrectly. This definition may be modified and is not the only way to define the margin for boosting algorithms. However, there are reasons why this definition may be appealing. == Examples of margin-based algorithms == Many classifiers can give an associated margin for each sample. However, only some classifiers utilize information of the margin while learning from a dataset. Many boosting algorithms rely on the notion of a margin to assign weight to samples. If a convex loss is utilized (as in AdaBoost or LogitBoost, for instance) then a sample with a higher margin will receive less (or equal) weight than a sample with a lower margin. This leads the boosting algorithm to focus weight on low-margin samples. In non-convex algorithms (e.g., BrownBoost), the margin still dictates the weighting of a sample, though the weighting is non-monotone with respect to the margin. == Generalization error bounds == One theoretical motivation behind margin classifiers is that their generalization error may be bound by the algorithm parameters and a margin term. An example of such a bound is for the AdaBoost algorithm. Let S {\displaystyle S} be a set of m {\displaystyle m} data points, sampled independently at random from a distribution D {\displaystyle D} . Assume the VC-dimension of the underlying base classifier is d {\displaystyle d} and m ≥ d ≥ 1 {\displaystyle m\geq d\geq 1} . Then, with probability 1 − δ {\displaystyle 1-\delta } , we have the bound: P D ( y ∑ j t α j h j ( x ) ∑ | α j | ≤ 0 ) ≤ P S ( y ∑ j t α j h j ( x ) ∑ | α j | ≤ θ ) + O ( 1 m d log 2 ⁡ ( m / d ) / θ 2 + log ⁡ ( 1 / δ ) ) {\displaystyle P_{D}\left({\frac {y\sum _{j}^{t}\alpha _{j}h_{j}(x)}{\sum |\alpha _{j}|}}\leq 0\right)\leq P_{S}\left({\frac {y\sum _{j}^{t}\alpha _{j}h_{j}(x)}{\sum |\alpha _{j}|}}\leq \theta \right)+O\left({\frac {1}{\sqrt {m}}}{\sqrt {d\log ^{2}(m/d)/\theta ^{2}+\log(1/\delta )}}\right)} for all θ > 0 {\displaystyle \theta >0} .

  Read more →
• 

  LogitBoost

  In machine learning and computational learning theory, LogitBoost is a boosting algorithm formulated by Jerome Friedman, Trevor Hastie, and Robert Tibshirani. The original paper casts the AdaBoost algorithm into a statistical framework. Specifically, if one considers AdaBoost as a generalized additive model and then applies the cost function of logistic regression, one can derive the LogitBoost algorithm. == Minimizing the LogitBoost cost function == LogitBoost can be seen as a convex optimization. Specifically, given that we seek an additive model of the form f = ∑ t α t h t {\displaystyle f=\sum _{t}\alpha _{t}h_{t}} the LogitBoost algorithm minimizes the logistic loss: ∑ i log ⁡ ( 1 + e − y i f ( x i ) ) {\displaystyle \sum _{i}\log \left(1+e^{-y_{i}f(x_{i})}\right)}

  Read more →