AI Email Message Generator

AI Email Message Generator — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

• 

  INDECT

  INDECT is a research project in the area of intelligent security systems performed by several European universities since 2009 and funded by the European Union. The purpose of the project is to involve European scientists and researchers in the development of solutions to and tools for automatic threat detection through e.g. processing of CCTV camera data streams, standardization of video sequence quality for user applications, threat detection in computer networks as well as data and privacy protection. The area of research, applied methods, and techniques are described in the public deliverables which are available to the public on the project's website. Practically, all information related to the research is public. Only documents that comprise information related to financial data or information that could negatively influence the competitiveness and law enforcement capabilities of parties involved in the project are not published. This follows regulations and practices applied in EU research projects. == Application and target users == The main end-user of INDECT solutions are police forces and security services. The principle of operation of the project is detecting threats and identifying sources of threats, without monitoring and searching for particular citizens or groups of citizens. Then, the system operator (i.e. police officer) decides whether an intervention of services responsible for public security are required or not. Further investigation eventually leading to persons related to threats is performed, preserving the presumption of innocence, based on existing procedures already used by police services and prosecutors. As it can be found in the project deliverables, INDECT does not involve storage of personal data (such as names, addresses, identity document numbers, etc.). A similar, behavior-based surveillance program was SAMURAI (Suspicious and Abnormal behavior Monitoring Using a netwoRk of cAmeras & sensors for sItuation awareness enhancement). == Expected results == The main expected results of the INDECT project are: Trial of intelligent analysis of video and audio data for threat detection in urban environments Creation of tools and technology for privacy and data protection during storage and transmission of information using quantum cryptography and new methods of digital watermarking Performing computer-aided detection of threats and targeted crimes in Internet resources with privacy-protecting solutions Construction of a search engine for rapid semantic search based on watermarking of content related to child pornography and human organ trafficking Implementation of a distributed computer system that is capable of effective intelligent processing == Controversy == Some media and other sources accuse INDECT of privacy abuse, collecting personal data, and keeping information from the public. Consequently, these issues have been commented and discussed by some Members of the European Parliament. As seen in the project's documentation, INDECT does not involve mobile phone tracking or call interception. The rumors about testing INDECT during 2012 UEFA European Football Championship also turned out to be false. The mid-term review of the Seventh Framework Programme to the European Parliament strongly urges the European Commission to immediately make all documents available and to define a clear and strict mandate for the research goal, the application, and the end users of INDECT, and stresses a thorough investigation of the possible impact on fundamental rights. Nevertheless, according to Mr. Paweł Kowal, MEP, the project had the ethical review on 15 March 2011 in Brussels with the participation of ethics experts from Austria, France, Netherlands, Germany and Great Britain.

  Read more →
• 

  Enterprise bus matrix

  The enterprise bus matrix is a data warehouse planning tool and model created by Ralph Kimball, and is part of the data warehouse bus architecture. The matrix is the logical definition of one of the core concepts of Kimball's approach to dimensional modeling conformed dimension. The bus matrix defines part of the data warehouse bus architecture and is an output of the business requirements phase in the Kimball lifecycle. It is applied in the following phases of dimensional modeling and development of the data warehouse. The matrix can be categorized as a hybrid model, being part technical design tool, part project management tool and part communication tool == Background == The need for an enterprise bus matrix stems from the way one goes about creating the overall data warehouse environment. Historically there have been two approaches: a structured, centralized and planned approach and a more loosely defined, department specific approach, in which solutions are developed in a more independent matter. Autonomous projects can result in a range of isolated stove pipe data marts. Naturally each approach has its issues; the visionary approach often struggles with long delivery cycles and lack of reaction time as needs emerge and scope issues arise. On the other hand, the development of isolated data marts leads to stovepipe systems that lack synergy in development. Over time this approach will lead to a so-called data-mart-in-a-box architecture where interoperability and lack of cohesion is apparent, and can hinder the realization of an overall enterprise data warehouse. As an attempt to handle this issue, Ralph Kimball introduced the enterprise bus. == Description == The bus matrix purpose is one of high abstraction and visionary planning on the data warehouse architectural level. By dictating coherency in the development and implementation of an overall data warehouse the bus architecture approach enables an overall vision of the broader enterprise integration and consistency while at the same time dividing the problem into more manageable parts – all in a technology and software independent manner. The bus matrix and architecture builds upon the concept of conformed dimensions, creating a structure of common dimensions that ideally can be used across the enterprise by all business processes related to the data warehouse and the corresponding fact tables from which they derive their context. According to Kimball and Margy Ross's article “Differences of Opinion” "The Enterprise Data warehouse built on the bus architecture ”identifies and enforces the relationship between business process metrics (facts) and descriptive attributes (dimensions)”. The concept of a bus is well known in the language of information technology, and is what reflects the conformed dimension concept in the data warehouse, creating the skeletal structure where all parts of a system connect, ensuring interoperability and consistency of data, and at the same time considers future expansion. This makes the conformed dimensions act as the integration ‘glue’, creating a robust backbone of the enterprise Data Warehouse.

  Read more →
• 

  Savepoint

  A savepoint is a way of implementing subtransactions (also known as nested transactions) within a relational database management system by indicating a point within a transaction that can be "rolled back to" without affecting any work done in the transaction before the savepoint was created. Multiple savepoints can exist within a single transaction. Savepoints are useful for implementing complex error recovery in database applications. If an error occurs in the midst of a multiple-statement transaction, the application may be able to recover from the error (by rolling back to a savepoint) without needing to abort the entire transaction. A savepoint can be declared by issuing a SAVEPOINT name statement. All changes made after a savepoint has been declared can be undone by issuing a ROLLBACK TO SAVEPOINT name command. Issuing RELEASE SAVEPOINT name will cause the named savepoint to be discarded, but will not otherwise affect anything. Issuing the commands ROLLBACK or COMMIT will also discard any savepoints created since the start of the main transaction. Savepoints are defined in the SQL standard and are supported by all established SQL relational databases, including PostgreSQL, Oracle Database, Microsoft SQL Server, MySQL, IBM Db2, SQLite (since 3.6.8), Firebird, H2 Database Engine, and Informix (since version 11.50xC3).

  Read more →
• 

  Australian Geoscience Data Cube

  The Australian Geoscience Data Cube (AGDC) is an approach to storing, processing and analyzing large collections of Earth observation data. The technology is designed to meet challenges of national interest by being agile and flexible with vast amounts of layered grid data. The AGDC reduces processing time of traditional image analysis by calibrating, pre-computing known extents, pixel alignment and storing metadata in a cell lattice structure. The temporal-pixel aligned data can often be analysed faster across space and time dimensions than previous scene based techniques. This allows the AGDC to be flexible in tackling future challenges and improve analysis times on every-increasing data repositories of earth observation. The AGDC has also been used internationally to allow countries to maintain ecologically sustainable programs and reduce the difficulty curve of utilizing Remote Sensing data. == Background == The AGDC was originally conceived by Geoscience Australia but is now maintained in a partnership between Geoscience Australia, Commonwealth Scientific and Industrial Research Organisation (CSIRO) and National Computational Infrastructure National Facility (Australia) (NCI). This is made possible by the funding from the partnership and a number of organisations such as National Collaborative Research Infrastructure Strategy (NCRIS). == Analysis ready data, ingestion and indexing == The data processed in the cube is made analysis ready before being ingested and indexed into the AGDC. Analysis ready data is pre-processed data that has applied corrections for instrument calibration (gains and offsets), geolocation (spatial alignment) and radiometry (solar illumination, incidence angle, topography, atmospheric interference). The ingestion process manages the translation of datasets into the storage units while maintaining a database index. The data within the storage and index can be accessed via API calls often compiled within code such as Python (programming language). Example: s2a_l1c = dc.load(product='s2a_level1c_granule',x=(147.36, 147.41), y=(-35.1, -35.15), measurements=['04','03','02'], output_crs='EPSG:4326', resolution=(-0.00025,0.00025)) === Datasets currently stored === Geoscience Australia Landsat Surface Reflectance (1987 to present) Landsat Pixel Quality Landsat Fractional Cover Landsat NDVI === Datasets that have been piloted === USGS Landsat Surface Reflectance SRTM DEM Himawari 8 MODIS Sentinel-2 L1C / S2A Australian Gridded Climate Data == Open source == The AGDC code base is situated in GitHub as an open repository. The core code base moved to the Open Data Cube in early 2017 as part of an international collaboration. Whilst the code base is the Open Data Cube, individual cubes exist as their own right such as the AGDC on the National Computational Infrastructure National Facility (Australia) (NCI) using the High-Performance Computing Cluster HPCC. The core code can be installed on personal computers or public computers (using git) and has many unit tests. Documentation for the code base exists on Read the Docs. == Challenges of the AGDC == The AGDC is designed to meet nationally significant challenges such as the following. Sustainability Environment Water resource management Disaster assist Policy development Community planning Forest preservation Carbon measurement == International awards == The AGDC won the 2016 Content Platform of the Year award from Geospatial World Forum.

  Read more →
• 

  Signal-to-noise ratio (imaging)

  Signal-to-noise ratio (SNR) is used in imaging to characterize image quality. The sensitivity of a (digital or film) imaging system is typically described in the terms of the signal level that yields a threshold level of SNR. Industry standards define sensitivity in terms of the ISO film speed equivalent, using SNR thresholds (at average scene luminance) of 40:1 for "excellent" image quality and 10:1 for "acceptable" image quality. SNR is sometimes quantified in decibels (dB) of signal power relative to noise power, though in the imaging field the concept of "power" is sometimes taken to be the power of a voltage signal proportional to optical power; so a 20 dB SNR may mean either 10:1 or 100:1 optical power, depending on which definition is in use. == Definition of SNR == Traditionally, SNR is defined to be the ratio of the average signal value μ s i g {\displaystyle \mu _{\mathrm {sig} }} to the standard deviation of the signal σ s i g {\displaystyle \sigma _{\mathrm {sig} }} : S N R = μ s i g σ s i g {\displaystyle \mathrm {SNR} ={\frac {\mu _{\mathrm {sig} }}{\sigma _{\mathrm {sig} }}}} when the signal is an optical intensity, or as the square of this value if the signal and noise are viewed as amplitudes (field quantities).

  Read more →
• 

  Communication-avoiding algorithm

  Communication-avoiding algorithms minimize movement of data within a memory hierarchy for improving its running-time and energy consumption. These minimize the total of two costs (in terms of time and energy): arithmetic and communication. Communication, in this context refers to moving data, either between levels of memory or between multiple processors over a network. It is much more expensive than arithmetic. == Formal theory == === Two-level memory model === A common computational model in analyzing communication-avoiding algorithms is the two-level memory model: There is one processor and two levels of memory. Level 1 memory is infinitely large. Level 0 memory ("cache") has size M {\displaystyle M} . In the beginning, input resides in level 1. In the end, the output resides in level 1. Processor can only operate on data in cache. The goal is to minimize data transfers between the two levels of memory. === Matrix multiplication === Corollary 6.2: More general results for other numerical linear algebra operations can be found in. The following proof is from. == Motivation == Consider the following running-time model: Measure of computation = Time per FLOP = γ Measure of communication = No. of words of data moved = β ⇒ Total running time = γ·(no. of FLOPs) + β·(no. of words) From the fact that β >> γ as measured in time and energy, communication cost dominates computation cost. Technological trends indicate that the relative cost of communication is increasing on a variety of platforms, from cloud computing to supercomputers to mobile devices. The report also predicts that gap between DRAM access time and FLOPs will increase 100× over coming decade to balance power usage between processors and DRAM. Energy consumption increases by orders of magnitude as we go higher in the memory hierarchy. United States president Barack Obama cited communication-avoiding algorithms in the FY 2012 Department of Energy budget request to Congress: New Algorithm Improves Performance and Accuracy on Extreme-Scale Computing Systems. On modern computer architectures, communication between processors takes longer than the performance of a floating-point arithmetic operation by a given processor. ASCR researchers have developed a new method, derived from commonly used linear algebra methods, to minimize communications between processors and the memory hierarchy, by reformulating the communication patterns specified within the algorithm. This method has been implemented in the TRILINOS framework, a highly-regarded suite of software, which provides functionality for researchers around the world to solve large scale, complex multi-physics problems. == Objectives == Communication-avoiding algorithms are designed with the following objectives: Reorganize algorithms to reduce communication across all memory hierarchies. Attain the lower-bound on communication when possible. The following simple example demonstrates how these are achieved. === Matrix multiplication example === Let A, B and C be square matrices of order n × n. The following naive algorithm implements C = C + A B: for i = 1 to n for j = 1 to n for k = 1 to n C(i,j) = C(i,j) + A(i,k) B(k,j) Arithmetic cost (time-complexity): n2(2n − 1) for sufficiently large n or O(n3). Rewriting this algorithm with communication cost labelled at each step for i = 1 to n {read row i of A into fast memory} - n2 reads for j = 1 to n {read C(i,j) into fast memory} - n2 reads {read column j of B into fast memory} - n3 reads for k = 1 to n C(i,j) = C(i,j) + A(i,k) B(k,j) {write C(i,j) back to slow memory} - n2 writes Fast memory may be defined as the local processor memory (CPU cache) of size M and slow memory may be defined as the DRAM. Communication cost (reads/writes): n3 + 3n2 or O(n3) Since total running time = γ·O(n3) + β·O(n3) and β >> γ the communication cost is dominant. The blocked (tiled) matrix multiplication algorithm reduces this dominant term: ==== Blocked (tiled) matrix multiplication ==== Consider A, B and C to be n/b-by-n/b matrices of b-by-b sub-blocks where b is called the block size; assume three b-by-b blocks fit in fast memory. for i = 1 to n/b for j = 1 to n/b {read block C(i,j) into fast memory} - b2 × (n/b)2 = n2 reads for k = 1 to n/b {read block A(i,k) into fast memory} - b2 × (n/b)3 = n3/b reads {read block B(k,j) into fast memory} - b2 × (n/b)3 = n3/b reads C(i,j) = C(i,j) + A(i,k) B(k,j) - {do a matrix multiply on blocks} {write block C(i,j) back to slow memory} - b2 × (n/b)2 = n2 writes Communication cost: 2n3/b + 2n2 reads/writes << 2n3 arithmetic cost Making b as large possible: 3b2 ≤ M we achieve the following communication lower bound: 31/2n3/M1/2 + 2n2 or Ω (no. of FLOPs / M1/2) == Previous approaches for reducing communication == Most of the approaches investigated in the past to address this problem rely on scheduling or tuning techniques that aim at overlapping communication with computation. However, this approach can lead to an improvement of at most a factor of two. Ghosting is a different technique for reducing communication, in which a processor stores and computes redundantly data from neighboring processors for future computations. Cache-oblivious algorithms represent a different approach introduced in 1999 for fast Fourier transforms, and then extended to graph algorithms, dynamic programming, etc. They were also applied to several operations in linear algebra as dense LU and QR factorizations. The design of architecture specific algorithms is another approach that can be used for reducing the communication in parallel algorithms, and there are many examples in the literature of algorithms that are adapted to a given communication topology.

  Read more →
• 

  Microsoft SQL Server Master Data Services

  Microsoft SQL Server Master Data Services (MDS) is a Master Data Management (MDM) product from Microsoft that ships as a part of the Microsoft SQL Server relational database management system. Master data management (MDM) allows an organization to discover and define non-transactional lists of data, and compile maintainable, reliable master lists. Master Data Services first shipped with Microsoft SQL Server 2008 R2. Microsoft SQL Server 2016 introduced enhancements to Master Data Services, such as improved performance and security, and the ability to clear transaction logs, create custom indexes, share entity data between different models, and support for many-to-many relationships. == Overview == In Master Data Services, the model is the highest level container in the structure of your master data. You create a model to manage groups of similar data. A model contains one or more entities, and entities contain members that are the data records. An entity is similar to a table. Like other MDM products, Master Data Services aims to create a centralized data source and keep it synchronized, and thus reduce redundancies, across the applications which process the data. Sharing the architectural core with Stratature +EDM, Master Data Services uses a Microsoft SQL Server database as the physical data store. It is a part of the Master Data Hub, which uses the database to store and manage data entities. It is a database with the software to validate and manage the data, and keep it synchronized with the systems that use the data. The master data hub has to extract the data from the source system, validate, sanitize and shape the data, remove duplicates, and update the hub repositories, as well as synchronize the external sources. The entity schemas, attributes, data hierarchies, validation rules and access control information are specified as metadata to the Master Data Services runtime. Master Data Services does not impose any limitation on the data model. Master Data Services also allows custom Business rules, used for validating and sanitizing the data entering the data hub, to be defined, which is then run against the data matching the specified criteria. All changes made to the data are validated against the rules, and a log of the transaction is stored persistently. Violations are logged separately, and optionally the owner is notified, automatically. All the data entities can be versioned. Master Data Services allows the master data to be categorized by hierarchical relationships, such as employee data are a subtype of organization data. Hierarchies are generated by relating data attributes. Data can be automatically categorized using rules, and the categories are introspected programmatically. Master Data Services can also expose the data as Microsoft SQL Server views, which can be pulled by any SQL-compatible client. It uses a role-based access control system to restrict access to the data. The views are generated dynamically, so they contain the latest data entities in the master hub. It can also push out the data by writing to some external journals. Master Data Services also includes a web-based UI for viewing and managing the data. It uses ASP.NET in the back-end. The Silverlight front-end was replaced with HTML5 in SQL Server 2019. Master Data Services provides a Web service interface to expose the data, as well as an API, which internally uses the exposed web services, exposing the feature set, programmatically, to access and manipulate the data. It also integrates with Active Directory for authentication purposes. Unlike +EDM, Master Data Services supports Unicode characters, as well as support multilingual user interfaces. SQL Server 2016 introduced a significant performance increase in Master Data Services over previous versions. == Terminology == Model is the highest level of an MDS instance. It is the primary container for specific groupings of master data. In many ways it is very similar to the idea of a database. Entities are containers created within a model. Entities provide a home for members, and are in many ways analogous to database tables. (e.g. Customer) Members are analogous to the records in a database table (Entity) e.g. Will Smith. Members are contained within entities. Each member is made up of two or more attributes. Attributes are analogous to the columns within a database table (Entity) e.g. Surname. Attributes exist within entities and help describe members (the records within the table). Name and Code attributes are created by default for each entity and serve to describe and uniquely identify leaf members. Attributes can be related to other attributes from other entities which are called 'domain-based' attributes. This is similar to the concept of a foreign key. Other attributes however, will be of type 'free-form' (most common) or 'file'. Attribute Groups are explicitly defined collections of particular attributes. Say you have an entity "customer" that has 50 attributes — too much information for many of your users. Attribute groups enable the creation of custom sets of hand-picked attributes that are relevant for specific audiences. (e.g. "customer - delivery details" that would include just their name and last known delivery address). This is very similar to a database view. Hierarchies organize members into either Derived or Explicit hierarchical structures. Derived hierarchies, as the name suggests, are derived by the MDS engine based on the relationships that exist between attributes. Explicit hierarchies are created by hand using both leaf and consolidated members. Business Rules can be created and applied against model data to ensure that custom business logic is adhered to. In order to be committed into the system data must pass all business rule validations applied to them. e.g. Within the Customer Entity you may want to create a business rule that ensures all members of the 'Country' Attribute contain either the text "USA" or "Canada". The Business Rule once created and ran will then verify all the data is correct before it accepts it into the approved model. Versions provide system owners / administrators with the ability to Open, Lock or Commit a particular version of a model and the data contained within it at a particular point in time. As the content within a model varies, grows or shrinks over time versions provide a way of managing metadata so that subscribing systems can access to the correct content.

  Read more →
• 

  Information literacy

  The Association of College and Research Libraries defines information literacy as a "set of integrated abilities encompassing the reflective discovery of information, the understanding of how information is produced and valued and the use of information in creating new knowledge and participating ethically in communities of learning". In the United Kingdom, the Chartered Institute of Library and Information Professionals' definition also makes reference to knowing both "when" and "why" information is needed. The 1989 American Library Association (ALA) Presidential Committee on Information Literacy formally defined information literacy (IL) as attributes of an individual, stating that "to be information literate, a person must be able to recognize when information is needed and have the ability to locate, evaluate and use effectively the needed information". In 1990, academic Lori Arp published a paper asking, "Are information literacy instruction and bibliographic instruction the same?" Arp argued that neither term was particularly well defined by theoreticians or practitioners in the field. Further studies were needed to lessen the confusion and continue to articulate the parameters of the question. The Alexandria Proclamation of 2005 defined the term as a human rights issue: "Information literacy empowers people in all walks of life to seek, evaluate, use and create information effectively to achieve their personal, social, occupational and educational goals. It is a basic human right in a digital world and promotes social inclusion in all nations." The United States National Forum on Information Literacy defined information literacy as "the ability to know when there is a need for information, to be able to identify, locate, evaluate, and effectively use that information for the issue or problem at hand." Meanwhile, in the UK, the library professional body CILIP, define information literacy as "the ability to think critically and make balanced judgements about any information we find and use. It empowers us as citizens to develop informed views and to engage fully with society." A number of other efforts have been made to better define the concept and its relationship to other skills and forms of literacy. Other pedagogical outcomes related to information literacy include traditional literacy, computer literacy, research skills and critical thinking skills. Information literacy as a sub-discipline is an emerging topic of interest and counter measure among educators and librarians with the prevalence of misinformation, fake news, and disinformation. Scholars have argued that in order to maximize people's contributions to a democratic and pluralistic society, educators should be challenging governments and the business sector to support and fund educational initiatives in information literacy. == History == The phrase "information literacy" first appeared in print in a 1974 report written on behalf of the National Commission on Libraries and Information Science by Paul G. Zurkowski, who was at the time president of the Information Industry Association (now the Software and Information Industry Association). Zurkowski used the phrase to describe the "techniques and skills" learned by the information literate "for utilizing the wide range of information tools as well as primary sources in molding information solutions to their problems" and drew a relatively firm line between the "literates" and "information illiterates." The concept of information literacy appeared again in a 1976 paper by Lee Burchina presented at the Texas A&M University library's symposium. Burchina identified a set of skills needed to locate and use information for problem solving and decision making. In another 1976 article in Library Journal, M.R. Owens applied the concept to political information literacy and civic responsibility, stating, "All [people] are created equal but voters with information resources are in a position to make more intelligent decisions than citizens who are information illiterates. The application of information resources to the process of decision-making to fulfill civic responsibilities is a vital necessity." In a literature review published in an academic journal in 2020, Oral Roberts University professor Angela Sample cites several conceptual waves of information literacy definitions as defining information as a way of thinking, a set of skills, and a social practice. The introduction of these concepts led to the adoption of a mechanism called metaliteracy and the creation of threshold concepts and knowledge dispositions, which led to the creation of the ALA's Information Literacy Framework. The American Library Association's Presidential Committee on Information Literacy released a report on January 10, 1989. Titled as the Presidential Committee on Information Literacy: Final Report, the article outlines the importance of information literacy, opportunities to develop it, and the idea of an Information Age School. The recommendations of the Committee led to establishment of the National Forum on Information Literacy, a coalition of more than 90 national and international organizations. In 1998, the American Association of School Librarians and the Association for Educational Communications and Technology published Information Power: Building Partnerships for Learning, which further established specific goals for information literacy education, defining some nine standards in the categories of "information literacy," "independent learning," and "social responsibility." Also in 1998, the Presidential Committee on Information Literacy updated its final report. The report outlined six recommendations from the original report, and examined areas of challenge and progress. In 1999, the Society of College, National and University Libraries (SCONUL) in the UK published The Seven Pillars of Information Literacy to model the relationship between information skills and IT skills, and the idea of the progression of information literacy into the curriculum of higher education. In 2003, the National Forum on Information Literacy, along with UNESCO and the National Commission on Libraries and Information Science, sponsored an international conference in Prague. Representatives from twenty-three countries gathered to discuss the importance of information literacy in a global context. The resulting Prague Declaration described information literacy as a "key to social, cultural, and economic development of nations and communities, institutions and individuals in the 21st century" and declared its acquisition as "part of the basic human right of lifelong learning". In the United States specifically, information literacy was prioritized in 2009 during President Barack Obama's first term. In effort to stress the value information literacy has on everyday communication, he designated October as National Information Literacy Awareness Month in his released proclamation. In 2015, the Association of College and Research Libraries (ACRL) adopted the Framework for Information Literacy for Higher Education, which defines information literacy as "the set of integrated abilities encompassing the reflective discovery of information, the understanding of how information is produced and valued, and the use of information in creating new knowledge and participating ethically in communities of learning".Association of College and Research Libraries (2015-02-09). "Framework for Information Literacy for Higher Education". Association of College and Research Libraries. American Library Association. Retrieved 2026-02-17. == Presidential Committee on Information Literacy == The American Library Association's Presidential Committee on Information Literacy defined information literacy as the ability "to recognize when information is needed and have the ability to locate, evaluate, and use effectively the needed information" and highlighted information literacy as a skill essential for lifelong learning and the production of an informed and prosperous citizenry. The committee outlined six principal recommendations. Included were recommendations like "Reconsider the ways we have organized information institutionally, structured information access, and defined information's role in our lives at home in the community, and in the work place"; to promote "public awareness of the problems created by information illiteracy"; to develop a national research agenda related to information and its use; to ensure the existence of "a climate conducive to students' becoming information literate"; to include information literacy concerns in teacher education democracy. In the updated report, the committee ended with an invitation, asking the National Forum and regular citizens to recognize that "the result of these combined efforts will be a citizenry which is made up of effective lifelong learners who can always find the information needed for the issue or decision at hand. This new

  Read more →
• 

  Vicarious (company)

  Vicarious was an artificial intelligence company based in the San Francisco Bay Area, California. They use the theorized computational principles of the brain to attempt to build software that can think and learn like a human. Vicarious describes its technology as "a turnkey robotics solution integrator using artificial intelligence to automate tasks too complex and versatile for traditional automations". Alphabet Inc acquired the company in 2022 for an undisclosed amount. == Founders == The company was founded in 2010 by D. Scott Phoenix and Dileep George. Before co-founding Vicarious, Phoenix was Entrepreneur in Residence at Founders Fund and CEO of Frogmetrics, a touchscreen analytics company he co-founded through the Y Combinator incubator program. Previously, George was Chief Technology Officer at Numenta, a company he co-founded with Jeff Hawkins and Donna Dubinsky while completing his PhD at Stanford University. == Funding == The company launched in February 2011 with funding from Founders Fund, Dustin Moskovitz, Adam D’Angelo (former Facebook CTO and co-founder of Quora), Felicis Ventures, and Palantir co-founder Joe Lonsdale. In August 2012, in its Series A round of funding, it raised an additional $15 million. The round was led by Good Ventures; Founders Fund, Open Field Capital and Zarco Investment Group also participated. The company received $40 million in its Series B round of funding. The round was led by individuals including Mark Zuckerberg, Elon Musk, and others. An additional undisclosed amount was later contributed by Amazon.com CEO Jeff Bezos, Yahoo! co-founder Jerry Yang, Skype co-founder Janus Friis and Salesforce.com CEO Marc Benioff. == Recursive Cortical Network == Vicarious is developing machine learning software based on the computational principles of the human brain. One such software is a vision system known as the Recursive Cortical Network (RCN), it is a generative graphical visual perception system that interprets the contents of photographs and videos in a manner similar to humans. The system is powered by a balanced approach that takes sensory data, mathematics, and biological plausibility into consideration. On October 22, 2013, beating CAPTCHA, Vicarious announced its model was reliably able to solve modern CAPTCHAs, with character recognition rates of 90% or better when trained on one style. However, Luis von Ahn, a pioneer of early CAPTCHA and founder of reCAPTCHA, expressed skepticism, stating: "It's hard for me to be impressed since I see these every few months." He pointed out that 50 similar claims to that of Vicarious had been made since 2003. Vicarious later published their findings in peer-reviewed journal Science. Vicarious has indicated that its AI was not specifically designed to complete CAPTCHAs and its success at the task is a product of its advanced vision system. Because Vicarious's algorithms are based on insights from the human brain, it is also able to recognize photographs, videos, and other visual data.

  Read more →
• 

  Artificial Intelligence Applications Institute

  The Artificial Intelligence Applications Institute (AIAI) at the School of Informatics at the University of Edinburgh is a non-profit technology transfer organisation that promoted research in the field of artificial intelligence. == History == The Artificial Intelligence Applications Institute (AIAI) was founded in 1983 at the University of Edinburgh as a specialist research and technology-transfer unit focusing on the practical uses of artificial intelligence (AI). The institute was established by Professor Jim Howe and colleagues from the Science and Engineering Research Council (SERC) Special Interest Group in AI in the Department of Artificial Intelligence, with a mission to apply AI techniques to solve real-world industrial and governmental problems. Under the directorship of Austin Tate, who served from 1985 to 2019, AIAI became one of the leading UK research centres devoted to AI programming systems, intelligent planning systems, decision support, and knowledge-based engineering. It collaborated with both academic partners and international organisations such as the European Space Agency and the UK Ministry of Defence. In 2001, AIAI joined the newly created Centre for Intelligent Systems and their Applications (CISA) within the University's School of Informatics. In December 2019, the institute was renamed the Artificial Intelligence and its Applications Institute to reflect a broader integration of fundamental and applied AI research. == Research programmes == AIAI’s research spans multiple areas of artificial intelligence, including: AI programming Systems - Edinburgh Prolog, Edinburgh Common Lisp, Logo; Knowledge representation and reasoning – development of ontologies, rule-based inference, and semantic modelling; Automated planning and scheduling – intelligent task management systems used in aerospace, manufacturing, and emergency response; Natural language processing and intelligent agents – interaction frameworks for human–computer collaboration; AI ethics and decision-making – research into responsible deployment and evaluation of autonomous systems. The institute also contributes to interdisciplinary fields such as computational creativity, explainable AI, and human–AI interaction. AIAI maintains close collaboration with the Bayes Centre and the Alan Turing Institute through joint research programmes and doctoral training initiatives. == Technology transfer and impact == From its inception, AIAI has combined academic research with technology-transfer activity, offering professional training, industrial consultancy, and bespoke software systems. It pioneered one of the earliest knowledge-based project-management systems, O-Plan, later evolved into the I-Plan framework used for autonomous planning and workflow management.

  Read more →
• 

  Knuth–Plass line-breaking algorithm

  The Knuth–Plass algorithm is a line-breaking algorithm designed for use in Donald Knuth's typesetting program TeX. It integrates the problems of text justification and hyphenation into a single algorithm by using a discrete dynamic programming method to minimize a loss function that attempts to quantify the aesthetic qualities desired in the finished output. The algorithm works by dividing the text into a stream of three kinds of objects: boxes, which are non-resizable chunks of content, glue, which are flexible, resizeable elements, and penalties, which represent places where breaking is undesirable (or, if negative, desirable). The loss function, known as "badness", is defined in terms of the deformation of the glue elements, and any extra penalties incurred through line breaking. Making hyphenation decisions follows naturally from the algorithm, but the choice of possible hyphenation points within words, and optionally their preference weighting, must be performed first, and that information inserted into the text stream in advance. Knuth and Plass' original algorithm does not include page breaking, but may be modified to interface with a pagination algorithm, such as the algorithm designed by Plass in his PhD thesis. Typically, the cost function for this technique should be modified so that it does not count the space left on the final line of a paragraph; this modification allows a paragraph to end in the middle of a line without penalty. The same technique can also be extended to take into account other factors such as the number of lines or costs for hyphenating long words. == Computational complexity == A naive brute-force exhaustive search for the minimum badness by trying every possible combination of breakpoints would take an impractical O ( 2 n ) {\displaystyle O(2^{n})} time. The classic Knuth-Plass dynamic programming approach to solving the minimization problem is a worst-case O ( n 2 ) {\displaystyle O(n^{2})} algorithm but usually runs much faster, in close to linear time. Solving for the Knuth-Plass optimum can be shown to be a special case of the convex least-weight subsequence problem, which can be solved in O ( n ) {\displaystyle O(n)} time. Methods to do this include the SMAWK algorithm. == Simple example of minimum raggedness metric == For the input text AAA BB CC DDDDD with line width 6, a greedy algorithm that puts as many words on a line as possible while preserving order before moving to the next line, would produce: ------ Line width: 6 AAA BB Remaining space: 0 CC Remaining space: 4 DDDDD Remaining space: 1 The sum of squared space left over by this method is 0 2 + 4 2 + 1 2 = 17 {\displaystyle 0^{2}+4^{2}+1^{2}=17} . However, the optimal solution achieves the smaller sum 3 2 + 1 2 + 1 2 = 11 {\displaystyle 3^{2}+1^{2}+1^{2}=11} : ------ Line width: 6 AAA Remaining space: 3 BB CC Remaining space: 1 DDDDD Remaining space: 1 The difference here is that the first line is broken before BB instead of after it, yielding a better right margin and a lower cost 11.

  Read more →
• 

  System of record

  A system of record (SOR) or source system of record (SSoR) is a data management term for an information storage system (commonly implemented on a computer system running a database management system) that is the authoritative data source for a given data element or piece of information, like for example a row (or record) in a table. In data vault it is referred to as the record source. == Background == The need to identify systems of record can become acute in organizations where management information systems have been built by taking output data from multiple source systems, re-processing this data, and then re-presenting the result for a new business use. In these cases, multiple information systems may disagree about the same piece of information. These disagreements may stem from semantic differences, differences in opinion, use of different sources, differences in the timing of the extract, transform, load processes that create the data they report against, or may simply be the result of bugs. == Use == The integrity and validity of any data set is open to question when there is no traceable connection to a good source, and listing a source system of record is a solution to this. Where the integrity of the data is vital, if there is an agreed system of record, the data element must either be linked to, or extracted directly from it. In other cases, the provenance and estimated data quality should be documented. The "system of record" approach is a good fit for environments where both: there is a single authority over all data consumers, and all consumers have similar needs == Trade-offs == In diverse environments, one instead needs to support the presence of multiple opinions. Consumers may accept different authorities or may differ on what constitutes an authoritative source—researchers may prefer carefully vetted data, while tactical military systems may require the most recent credible report.

  Read more →
• 

  Human Race Machine

  The Human Race Machine (HRM) is a computerized console composed of four different programs. The Human Race Machine program allows participants to see themselves with the facial characteristics of six different races: Asian, White, African, Middle Eastern, and Indian, mapped onto their own face. The Age Machine allows viewers see an aged version of his or her face. A version of this methodology has been used for over twenty years by the FBI and the National Center for Missing and Exploited Children to help locate kidnap victims and missing children. The Couples Machine combines photographs of two people in different percentages to show the appearance of their child. The Anomaly Machine lets viewers see themselves with facial anomalies. The HRM was created by artist Nancy Burson and David Kramlich; it uses morphing technology. It was shown on Oprah on 2006-02-16.

  Read more →
• 

  Shapiro–Senapathy algorithm

  The Shapiro—Senapathy algorithm (S&S) is a computational method for identifying splice sites in eukaryotic genes. The algorithm employs a Position Weight Matrix (PWM) scoring formula to predict donor and acceptor splice sites in any given gene. This methodology has been used to discover splice sites and disease-causing splice site mutations in the human genome, and has become a standard tool in clinical genomics. The S&S algorithm has been cited in thousands of clinical studies, according to Google Scholar. It has also formed the basis of widely used software, including Human Splicing Finder, SROOGLE, and Alamut, which identify splice sites and splice site mutations that cause disease. The algorithm has uncovered splicing mutations in diseases ranging from cancers to inherited disorders, and predicted the deleterious effects of these mutations including exon skipping, intron retention, and cryptic splice site activation. == The algorithm == A splice site defines the boundary between a coding exon and a non-coding intron in eukaryotic genes. The S&S algorithm employs a sliding window, corresponding to the length of the splice site motif, to scan a gene sequence and detect potential splice sites. For each sliding window, the algorithm calculates a score by comparing the nucleotide sequence to a Position Weight Matrix (PWM) derived from known splice sites. This formula generates a percentile score, indicating the likelihood that a given sequence functions as a donor or acceptor splice site. The majority of disease-causing mutations in the human genome are located in splice sites. Clinical genomics studies analyze the splice site scores generated by the S&S algorithm to predict the consequences of splice site mutations including exon skipping and intron retention. The algorithm's sensitivity to single-nucleotide changes allows it to determine mutations that may impact RNA splicing and contribute to disease. In addition to identifying real splice sites, the S&S algorithm has been used to discover cryptic splice sites — alternative splice sites activated by mutations — which may disrupt normal splicing. The algorithm detects mutations that lead to the activation of cryptic splice sites, which may be located proximal to real splice sites or deep within non-coding introns. It has thus been used to determine the causes of numerous diseases that are due to cryptic splicing. == Cancer gene discovery using S&S == The S&S algorithm has been used to identify splice-site mutations in genes associated with several cancers. For example, genes causing commonly occurring cancers including breast cancer, ovarian cancer, colorectal cancer, leukemia, head and neck cancers, prostate cancer, retinoblastoma, squamous cell carcinoma, gastrointestinal cancer, melanoma, liver cancer, Lynch syndrome, skin cancer, and neurofibromatosis have been found. In addition, splicing mutations in genes causing less commonly known cancers including gastric cancer, gangliogliomas, Li-Fraumeni syndrome, Loeys–Dietz syndrome, Osteochondromas (bone tumor), Nevoid basal cell carcinoma syndrome, and Pheochromocytomas have been identified. Specific mutations in different splice sites in various genes causing breast cancer (e.g., BRCA1, PALB2), ovarian cancer (e.g., SLC9A3R1, COL7A1, HSD17B7), colon cancer (e.g., APC, MLH1, DPYD), colorectal cancer (e.g., COL3A1, APC, HLA-A), skin cancer (e.g., COL17A1, XPA, POLH), and Fanconi anemia (e.g., FANC, FANA) have been uncovered. The mutations in the donor and acceptor splice sites in different genes causing a variety of cancers that have been identified by S&S are shown in Table 1. == Discovery of genes causing inherited disorders using S&S == Specific mutations in different splice sites in various genes that cause inherited disorders, including, for example, Type 1 diabetes (e.g., PTPN22, TCF1 (HCF-1A)), hypertension (e.g., LDL, LDLR, LPL), Marfan syndrome (e.g., FBN1, TGFBR2, FBN2), cardiac diseases (e.g., COL1A2, MYBPC3, ACTC1), eye disorders (e.g., EVC, VSX1) have been uncovered. A few example mutations in the donor and acceptor splice sites in different genes causing a variety of inherited disorders identified using S&S are shown in Table 2. == Genes causing immune system disorders == More than 100 immune system disorders affect humans, including inflammatory bowel diseases, multiple sclerosis, systemic lupus erythematosus, bloom syndrome, familial cold autoinflammatory syndrome, and dyskeratosis congenita. The Shapiro–Senapathy algorithm has been used to discover genes and mutations involved in many immune disorder diseases, including Ataxia telangiectasia, B-cell defects, epidermolysis bullosa, and X-linked agammaglobulinemia. Xeroderma pigmentosum, an autosomal recessive disorder is caused by faulty proteins formed due to new preferred splice donor site identified using S&S algorithm and resulted in defective nucleotide excision repair. Type I Bartter syndrome (BS) is caused by mutations in the gene SLC12A1. S&S algorithm helped in disclosing the presence of two novel heterozygous mutations c.724 + 4A > G in intron 5 and c.2095delG in intron 16 leading to complete exon 5 skipping. Mutations in the MYH gene, which is responsible for removing the oxidatively damaged DNA lesion are cancer-susceptible in the individuals. The IVS1+5C plays a causative role in the activation of a cryptic splice donor site and the alternative splicing in intron 1, S&S algorithm shows, guanine (G) at the position of IVS+5 is well conserved (at the frequency of 84%) among primates. This also supported the fact that the G/C SNP in the conserved splice junction of the MYH gene causes the alternative splicing of intron 1 of the β type transcript. Splice site scores were calculated according to S&S to find EBV infection in X-linked lymphoproliferative disease. Identification of Familial tumoral calcinosis (FTC) is an autosomal recessive disorder characterized by ectopic calcifications and elevated serum phosphate levels and it is because of aberrant splicing. == Application of S&S in hospitals for clinical practice and research == The Shapiro–Senapathy (S&S) algorithm has played a significant role in advancing the diagnosis and treatment of human diseases through its application in modern clinical genomics. With the widespread adoption of next-generation sequencing (NGS) technologies, the S&S algorithm is now routinely integrated into clinical practice by geneticists and diagnostic laboratories. It is implemented in various computational tools such as Human Splicing Finder (HSF), Splice Site Finder (SSF), and Alamut Visual, which assist in interpreting the functional impact of genetic variants on RNA splicing. The algorithm is particularly useful in identifying pathogenic splice site mutations in cases where the clinical presentation is unclear or where conventional diagnostic methods have failed to identify a causative gene. Its utility has been demonstrated across diverse patient cohorts, including individuals from different ethnic backgrounds with various cancers and inherited genetic disorders. The following are selected examples illustrating its application in clinical research. === Cancers === === Inherited disorders === == S&S - Algorithm for identifying splice sites, exons and split genes == The Shapiro–Senapathy algorithm (SSA) was developed to identify splice sites in uncharacterized genomic sequences, with early applications in the Human Genome Project. The method introduced a Position Weight Matrix (PWM)-based approach to analyze splicing sequences across eukaryotic organisms, marking the first computational framework to systematically define splice sites using probabilistic scoring. Key innovations of the algorithm included: Exon Detection – Exons were defined as sequences bounded by acceptor and donor splice sites with S&S scores above a threshold, requiring an open reading frame (ORF) for validation. Gene Prediction – The method enabled the identification of complete genes by assembling predicted exons, forming a basis for later gene-finding tools. Mutation Analysis – The algorithm distinguishes deleterious splice-site mutations (which disrupt protein function by lowering S&S scores) from neutral variations. This capability allowed researchers to study disease-linked cryptic splice sites in humans, animals, and plants. SSA's PWM-based framework influenced subsequent computational methods, including machine learning and neural network approaches, for splice-site prediction and alternative splicing research. It remains a foundational tool in genomics and disease studies. == Discovering the mechanisms of aberrant splicing in diseases == The Shapiro–Senapathy algorithm has been used to determine the various aberrant splicing mechanisms in genes due to deleterious mutations in the splice sites, which cause numerous diseases. Deleterious splice site mutations impair the normal splicing of the gene transcripts, and thereby make the encoded protei

  Read more →
• 

  Artificial intelligence industry in Taiwan

  The artificial intelligence (AI) industry in Taiwan refers to the development, application, and commercialization of artificial intelligence technologies within Taiwan. The industry has grown alongside Taiwan's established strengths in semiconductor manufacturing and information and communications technology (ICT), and is supported by government policy, research institutions, and private sector participation. AI development in Taiwan has focused on integrating hardware capabilities with software applications across sectors such as manufacturing, healthcare, and smart infrastructure. Artificial intelligence has been identified as a strategic area of development in Taiwan since the late 2010s. While Taiwan has historically played a limited role in early theoretical and expert-system phases of AI development, its position in global electronics manufacturing has provided a foundation for participation in the contemporary era of machine learning and data-driven AI systems. Taiwan's AI industry is characterized by a strong hardware base, particularly in semiconductor production and AI server manufacturing, combined with increasing investment in software, data infrastructure, and applied AI services. The sector has been shaped by global demand for computing power, advances in deep learning, and the expansion of AI applications in industrial and commercial contexts. == Government policy and development == The Taiwanese government has promoted AI development through a series of national strategies. In 2017, the Ministry of Science and Technology launched the "AI Grand Strategy for a Small Country" initiative, investing approximately US$517 million between 2017 and 2021 to support research, infrastructure, and talent development. This initiative aimed to build a domestic AI ecosystem by funding research centers, expanding data infrastructure, and supporting industrial adoption. The Executive Yuan also introduced the AI Taiwan Action Plan 1.0 (2018–2021), which focused on integrating AI technologies into existing industries and strengthening research and development capabilities. A subsequent plan, AI Taiwan Action Plan 2.0 (2023–2026), expanded the focus to include ethical governance, regulatory frameworks, and risk management in response to the growth of generative AI technologies. In 2023, the Taiwan AI Center of Excellence (Taiwan AICoE), a government-backed hub, was established by the National Science and Technology Council to accelerate AI development, foster international collaboration, and train talent in Taiwan. It acts as a specialized think tank focusing on creating a "smart technology island" by integrating AI resources and developing trusted, human-centric AI technologies. In 2024, the Taiwan Chip-based Industrial Innovation Program (CbI) was launched by the Executive Yuan as a 10-year, NT$300 billion (US$9.3 billion) initiative to leverage Taiwan's semiconductor dominance, driving innovation in AI, smart mobility, manufacturing, and healthcare. It aims to combine generative AI with IC technology, cultivate talent, and attract global startups to build a "Silicon Island". In parallel, the Taiwanese government has explored legislative frameworks such as a proposed Artificial Intelligence Fundamental Act in December 2025, addressing issues including data protection, safety standards, and intellectual property. == Industrial structure == === Semiconductor and hardware foundation === Taiwan's AI industry is closely linked to its semiconductor sector. In 2020, Taiwan accounted for approximately 77.3% of the global wafer foundry market and 57.7% of packaging and testing, with a 20.1% share in integrated circuit (IC) design. These capabilities provide critical infrastructure for AI systems, which rely on high-performance computing hardware. Taiwanese firms are also involved in the production of AI servers and related components, contributing significantly to global supply chains for data centers and cloud computing. The integration of chip design, manufacturing, and assembly has enabled Taiwan to play a central role in providing the computational resources required for AI development. On 20 November 2025, Google established the "Google Taiwan AI Infrastructure R&D Center", second only to its US headquarters and largest AI hardware infrastructure engineering center outside of the United States. === Software and services === Compared to its hardware capabilities, Taiwan's AI software sector is less developed. The absence of large-scale global AI platform companies has been noted as a structural limitation. As a result, much of Taiwan's AI industry focuses on applied solutions, including customization of existing AI models for specific industries. Therefore, efforts to strengthen software capabilities have included investment in research institutions, startup ecosystems, and collaborations between academia and industry. == Applications == === Smart manufacturing === AI has been widely applied in Taiwan's manufacturing sector, which is a major component of the economy. Applications include process automation, predictive maintenance, quality control, and fault detection. AI-enabled smart manufacturing systems aim to improve efficiency, reduce production costs, and enhance product quality. Taiwan's manufacturing industry has incorporated AI technologies into production lines, particularly in electronics and machinery sectors. === Healthcare === The use of AI in healthcare in Taiwan has expanded in areas such as medical imaging, diagnostics, and drug development. AI systems are used to analyze CT scans, MRI data, and other clinical information to support diagnosis and treatment planning. Taiwan's healthcare sector, which includes medical devices, pharmaceuticals, and medical services, has benefited from the integration of AI technologies, particularly in precision medicine and clinical decision support systems. A notable example of AI healthcare deployment in Taiwan is the collaboration between Siemens Healthineers, Ever Fortune AI, and Asia University Hospital. === Edge computing and IoT === AI applications in Taiwan increasingly involve edge computing, where data processing occurs near the source rather than in centralized cloud systems. This approach reduces latency and bandwidth requirements and is used in smart devices, sensors, and industrial equipment. Edge AI technologies are applied in areas such as smart appliances, industrial automation, and transportation systems. == Education and talent development == Human capital development has been a key focus of Taiwan's AI strategy. The Taiwan AI Academy, established in 2018 with support from Academia Sinica and industry partners, provides training programs for professionals and students aimed at accelerating the adoption of artificial intelligence technologies across industries. The academy offers a range of courses, including executive-level programs, technical training, and specialized tracks in areas such as smart manufacturing, smart healthcare, and edge AI. These programs are designed to provide intensive and practical instruction over relatively short periods. A notable component of the curriculum is project-based learning, in which participants are required to complete proof-of-concept (POC) projects addressing real-world industrial problems. These projects are often developed further for implementation within companies, facilitating technology transfer and commercialization. Between 2018 and 2021, more than 8,000 individuals completed AI training programs across campuses in Taipei, Hsinchu, Taichung, and Tainan. Graduates of the academy have contributed to the introduction of AI systems in sectors such as manufacturing, healthcare, and finance, supporting broader industrial transformation efforts. In addition to the Taiwan AI Academy, universities and research institutions in Taiwan play a significant role in AI education and research. Leading universities have expanded programs in computer science, data science, and machine learning, while research institutes conduct applied and fundamental studies in artificial intelligence. Collaboration between academia, government, and industry is a common feature of Taiwan's AI ecosystem, with joint research projects, internship programs, and technology incubation initiatives supporting talent development. Government-supported initiatives have also sought to attract and retain AI talent, including funding for graduate education, international collaboration programs, and incentives for industry–academic partnerships. These efforts aim to address talent shortages and strengthen Taiwan's capacity in both applied and foundational AI research. == Regulation and governance == Taiwan has developed guidelines and policy frameworks to address the risks associated with AI technologies. In 2023, the Executive Yuan issued guidelines for the use of generative AI in government agencies, focusing on data security and privacy. Ongoing policy discussions hav

  Read more →