AI Essay Bypass

AI Essay Bypass — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

DAvE (Infineon)

DAVE, or Digital Application Virtual Engineer, is a software development and code generation tool for microcontroller applications created in C/C++. == Versions == === Version 4 (beta) === The successor of the Eclipse-based development environment for C/C++ and/or graphical user interface (GUI) based development using application software (apps). It generates code for the latest XMC1xxx and XMC4xxx microcontrollers using ARM Cortex-M processors. DAVE software development kit (SDK) is a free integrated development environment to set up its own apps for DAVE. === Version 3 === Automatic code generation is based on the use of case-oriented, configurable, and tested software (SW) components, called DAVE Apps. They are comparable to executable and configurable application notes that can be downloaded from the web. The environment is based on Eclipse. Ordinary program development using C/C++ is also available. The targets for this development are XMC1xxx and XMC4xxx microcontrollers that use Cortex-M processors. === Previous versions === This version targets 32-bit microcontroller units (MCUs) (Infineon TriCore AUDO family), 16-bit MCUs (C166, XC166, XE166, and XC2000 family), and 8-bit MCUs (XC800 family) from Infineon. After the initial setup, the configuration wizard appears and gives an overview of the hardware peripherals, control units, and modules. The microcontroller application can be created by selecting the desired functions. At this step, module-specific functions must be selected for module initializing and control. Finally, the application source files will be generated by DAVE and embedded in a project in the selected development environment, where the code can still be modified or added to an extant project. == DAVE-related software == Infineon also developed additional software that can be used in conjunction with DAVE for specific microcontroller families or additional hardware: DAVE Bench for XC800 is a platform providing free development tools for Infineon's 8-bit microcontroller family, based on the Open Source Eclipse architecture. DAVE Drive is a GUI-based software tool that allows application developers to create embedded software for the control of brushless synchronous three-phase motors. == Alternative software == The Infineon MCUs are directly supported by several commercial products, depending on the selected MCU target. An embedded programming library for MATLAB exists. As a free alternative to DAVE, the developer can use the Keil Microcontroller Development Kit (MDK) Version 5. Code for the XMX1000 series up to 128 kB can be developed this way without purchasing a license from Keil.
Read more →
Pedagogical agent

A pedagogical agent is a concept borrowed from computer science and artificial intelligence and applied to education, usually as part of an intelligent tutoring system (ITS). It is a simulated human-like interface between the learner and the content, in an educational environment. A pedagogical agent is designed to model the type of interactions between a student and another person. Mabanza and de Wet define it as "a character enacted by a computer that interacts with the user in a socially engaging manner". A pedagogical agent can be assigned different roles in the learning environment, such as tutor or co-learner, depending on the desired purpose of the agent. "A tutor agent plays the role of a teacher, while a co-learner agent plays the role of a learning companion". == History == The history of Pedagogical Agents is closely aligned with the history of computer animation. As computer animation progressed, it was adopted by educators to enhance computerized learning by including a lifelike interface between the program and the learner. The first versions of a pedagogical agent were more cartoon than person, like Microsoft's Clippy which helped users of Microsoft Office load and use the program's features in 1997. However, with developments in computer animation, pedagogical agents can now look lifelike. By 2006 there was a call to develop modular, reusable agents to decrease the time and expertise required to create a pedagogical agent. There was also a call in 2009 to enact agent standards. The standardization and re-usability of pedagogical agents is less of an issue since the decrease in cost and widespread availability of animation tools. Individualized pedagogical agents can be found across disciplines including medicine, math, law, language learning, automotive, and armed forces. They are used in applications directed to every age, from preschool to adult. == Learning theories related to pedagogical agent design == === Distributed cognition theory === Distributed cognition theory is the method in which cognition progresses in the context of collaboration with others. Pedagogical agents can be designed to assist the cognitive transfer to the learner, operating as artifacts or partners with collaborative role in learning. To support the performance of an action by the user, the pedagogical agent can act as a cognitive tool as long as the agent is equipped with the knowledge that the user lacks. The interactions between the user and the pedagogical agent can facilitate a social relationship. The pedagogical agent may fulfill the role of a working partner. === Socio-cultural learning theory === Socio-cultural learning theory is how the user develops when they are involved in learning activities in which there is interaction with other agents. A pedagogical agent can: intervene when the user requests, provide support for tasks that the user cannot address, and potentially extend the learners cognitive reach. Interaction with the pedagogical agent may elicit a variety of emotions from the learner. The learner may become excited, confused, frustrated, and/or discouraged. These emotions affect the learners' motivation. === Extraneous Cognitive Load === Extraneous cognitive load is the extra effort being exerted by an individual's working memory due to the way information is being presented. A pedagogical agent can increase the user's cognitive load by distracting them and becoming the focus of their attention, causing split attention between the instructional material and the agent. Agents can reduce the perceived cognitive load by providing narration and personalization that can also promote a user's interest and motivation. While research on the reduction of cognitive load from pedagogical agents is minimal, more studies have shown that agents do not increase it. == Effectiveness == It has been suggested by researchers that pedagogical agents may take on different roles in the learning environment. Examples of these roles are: supplanting, scaffolding, coaching, testing, or demonstrating or modelling a procedure. A pedagogical agent as a tutor has not been demonstrated to add any benefit to an educational strategy in equivalent lessons with and without a pedagogical agent. According to Richard Mayer, there is some support in research for pedagogical agent increasing learning, but only as a presenter of social cues. A co-learner pedagogical agent is believed to increase the student's self-efficacy. By pointing out important features of instructional content, a pedagogical agent can fulfill the signaling function, which research on multimedia learning has shown to enhance learning. Research has demonstrated that human-human interaction may not be completely replaced by pedagogical agents, but learners may prefer the agents to non-agent multimedia systems. This finding is supported by social agency theory. Much like the varying effectiveness of the pedagogical agent roles in the learning environment, agents that take into account the user's affect have had mixed results. Research has shown pedagogical agents that make use of the users’ affect have been found to increase user knowledge retention, motivation, and perceived self-efficacy. However, with such a broad range of modalities in affective expressions, it is often difficult to utilize them. Additionally, having agents detect a user's affective state with precision remains challenging, as displays of affect are different across individuals. == Design == === Attractiveness === The appearance of a pedagogical agent can be manipulated to meet the learning requirements. The attractiveness of a pedagogical agent can enhance student's learning when the users were the opposite gender of the pedagogical agent. Male students prefer a sexy appearance of a female pedagogical agents and dislike the sexy appearance of male agents. Female students were not attracted by the sexy appearance of either male or female pedagogical agents. === Affective Response === Pedagogical agents have reached a point where they can convey and elicit emotion, but also reason about and respond to it. These agents are often designed to elicit and respond to affective actions from users through various modalities such as speech, facial expressions, and body gestures. They respond to the affective state of the given user, and make use of these modalities using a wide array of sensors incorporated into the design of the agent. Specifically in education and training applications, pedagogical agents are often designed to increasingly recognize when users or learners exhibit frustration, boredom, confusion, and states of flow. The added recognition in these agents is a step toward making them more emotionally intelligent, comforting and motivating the users as they interact. === Digital Representation === The design of a pedagogical agent often begins with its digital representation, whether it will be 2D or 3D and static or animated. Several studies have developed pedagogical agents that were both static and animated, then evaluated the relative benefits. Similar to other design considerations, the improved learning from static or animated agents remains questionable. One study showed that the appearance of an agent portrayed using a static image can impact a user's recall, based on the visual appearance. Other research found results that suggest static agent images improve learning outcomes. However, several other studies found user's learned more when the pedagogical agent was animated rather than static. Recently a meta-analysis of such research found a negligible improvement in learning via pedagogical agents, suggesting more work needs to be done in the area to support any claims.
Read more →
Spreading activation

Spreading activation is a method for searching associative networks, biological and artificial neural networks, or semantic networks. The search process is initiated by labeling a set of source nodes (e.g. concepts in a semantic network) with weights or "activation" and then iteratively propagating or "spreading" that activation out to other nodes linked to the source nodes. Most often these "weights" are real values that decay as activation propagates through the network. When the weights are discrete this process is often referred to as marker passing. Activation may originate from alternate paths, identified by distinct markers, and terminate when two alternate paths reach the same node. However brain studies show that several different brain areas play an important role in semantic processing. Spreading activation in semantic networks as a model were invented in cognitive psychology to model the fan out effect. Spreading activation can also be applied in information retrieval, by means of a network of nodes representing documents and terms contained in those documents. == Cognitive psychology == As it relates to cognitive psychology, spreading activation is the theory of how the brain iterates through a network of associated ideas to retrieve specific information. The spreading activation theory presents the array of concepts within our memory as cognitive units, each consisting of a node and its associated elements or characteristics, all connected together by edges. A spreading activation network can be represented schematically, in a sort of web diagram with shorter lines between two nodes meaning the ideas are more closely related and will typically be associated more quickly to the original concept. In memory psychology, the spreading activation model holds that people organize their knowledge of the world based on their personal experiences, which in turn form the network of ideas that is the person's knowledge of the world. When a word (the target) is preceded by an associated word (the prime) in word recognition tasks, participants seem to perform better in the amount of time that it takes them to respond. For instance, subjects respond faster to the word "doctor" when it is preceded by "nurse" than when it is preceded by an unrelated word like "carrot". This semantic priming effect with words that are close in meaning within the cognitive network has been seen in a wide range of tasks given by experimenters, ranging from sentence verification to lexical decision and naming. As another example, if the original concept is "red" and the concept "vehicles" is primed, they are much more likely to say "fire engine" instead of something unrelated to vehicles, such as "cherries". If instead "fruits" was primed, they would likely name "cherries" and continue on from there. The activation of pathways in the network has everything to do with how closely linked two concepts are by meaning, as well as how a subject is primed. == Algorithm == A directed graph is populated by Nodes[ 1...N ] each having an associated activation value A [ i ] which is a real number in the range [0.0 ... 1.0]. A Link[ i, j ] connects source node[ i ] with target node[ j ]. Each edge has an associated weight W [ i, j ] usually a real number in the range [0.0 ... 1.0]. Parameters: Firing threshold F, a real number in the range [0.0 ... 1.0] Decay factor D, a real number in the range [0.0 ... 1.0] Steps: Initialize the graph setting all activation values A [ i ] to zero. Set one or more origin nodes to an initial activation value greater than the firing threshold F. A typical initial value is 1.0. For each unfired node [ i ] in the graph having an activation value A [ i ] greater than the node firing threshold F: For each Link [ i, j ] connecting the source node [ i ] with target node [ j ], adjust A [ j ] = A [ j ] + (A [ i ] W [ i, j ] D) where D is the decay factor. If a target node receives an adjustment to its activation value so that it would exceed 1.0, then set its new activation value to 1.0. Likewise maintain 0.0 as a lower bound on the target node's activation value should it receive an adjustment to below 0.0. Once a node has fired it may not fire again, although variations of the basic algorithm permit repeated firings and loops through the graph. Nodes receiving a new activation value that exceeds the firing threshold F are marked for firing on the next spreading activation cycle. If activation originates from more than one node, a variation of the algorithm permits marker passing to distinguish the paths by which activation is spread over the graph The procedure terminates when either there are no more nodes to fire or in the case of marker passing from multiple origins, when a node is reached from more than one path. Variations of the algorithm that permit repeated node firings and activation loops in the graph, terminate after a steady activation state, with respect to some delta, is reached, or when a maximum number of iterations is exceeded. == Examples ==
Read more →
AI browser

An AI browser is a web browser with integrated artificial intelligence capabilities, such as automatically summarizing web page content or answering questions about it. A more specialized type is an agentic browser, based on the concept of agentic AI, which can take actions – such as navigating webpages or filling out forms – on behalf of the user. Several agentic browsers emerged in 2025, including ChatGPT Atlas (macOS only), Comet, and Dia. As of 2025, this is a recent development in the browser market, including new entrants from OpenAI, Opera and Perplexity. The designation of 'AI browser' also includes established browsers that later added non-agentic AI features, such as Microsoft Edge with the Copilot chatbot, Google Chrome with the Gemini chatbot (for Windows desktop users in the US with their language set to English), and Firefox with multiple chatbot providers (such as ChatGPT, Claude, Copilot, Gemini, and Le Chat). AI browsers have been noted to be susceptible to prompt injection attacks. == Browser extensions and integrations == Rather than creating entirely new browsers, some AI browsing solutions integrate with existing browsers through extensions or companion applications. These tools add agentic capabilities to established browsers without requiring users to switch platforms. Examples include Composite, which functions as a cross-browser agent that works with Chrome, Edge, and other browsers to automate web-based tasks for workers. == Cloud-based implementations == Cloud-based implementations of AI browsers allow users to run automated browsing agents without local installation. These systems operate on remote servers using frameworks such as Puppeteer or Playwright. Examples include Browserbase, Browser-use and AI Browser. The AI typically parses the Document Object Model (DOM) to locate and interact with page elements, and may also analyze browser screenshots to interpret layout and structure. == Criticisms and dangers == AI browsers have been noted to be susceptible to being vulnerable to prompt injection attacks, in which the content of websites can be used to hijack the control of the browser. Multiple organisations have argued against using AI browsers due to this vulnerability. The United Kingdom national cyber security centre and Gartner consider them to be too risky for adoption by most organisations. A study by the CISPA Helmholtz Center and Saarland University concluded that this vulnerability makes them easy targets for malware, fraud, automated defamation, disinformation and biased outputs.
Read more →
Reconstruction from projections

The problem of reconstructing a multidimensional signal from its projection is uniquely multidimensional, having no 1-D counterpart. It has applications that range from computer-aided tomography to geophysical signal processing. It is a problem which can be explored from several points of view—as a deconvolution problem, a modeling problem, an estimation problem, or an interpolation problem. == Motivation and applications == Many fields in science and engineering use reconstruction from projections, especially in imaging. It is widely applied geophysical tomography, medical imaging and industrial radiography. For example, in a CT scanner, the 3D structure of the patient’s body being scanned is measured with beams going through the tissue and hitting a detector, giving a flat projection of the body from that angle. Multiple projections are put together to get an image of the position and shape of structures inside in 3D. == Problem statement and basics == A projection is a linear mapping of an M {\displaystyle M} dimensional signal into an N {\displaystyle N} dimensional one, where N ≤ M {\displaystyle N\leq M} . And the objective of reconstruction is to restore the M {\displaystyle M} dimensional signal based on the N {\displaystyle N} dimensional signal. The following case is a 2-D signal projected into 1D signal. The signal in the original coordinate is denoted as d ( u , v ) {\displaystyle d(u,v)} . Now consider a collimated beam of radiation coming from the opposite orientation of v ^ {\displaystyle {\hat {v}}} , producing a projection along u ^ {\displaystyle {\hat {u}}} . v ^ {\displaystyle {\hat {v}}} and u ^ {\displaystyle {\hat {u}}} are normal to each other, and the angle between u {\displaystyle u} and u ^ {\displaystyle {\hat {u}}} is theta. The signal obtained along u ^ {\displaystyle {\hat {u}}} axis is defined to be p θ ( u ^ ) {\displaystyle p_{\theta }({\hat {u}})} . The relationship between the original coordinate and the rotated coordinate is given by [ u ^ v ^ ] = [ cos ⁡ θ sin ⁡ θ − sin ⁡ θ cos ⁡ θ ] [ u v ] {\displaystyle {\begin{bmatrix}{\hat {u}}\\{\hat {v}}\end{bmatrix}}={\begin{bmatrix}\cos \theta &\sin \theta \\-\sin \theta &\cos \theta \end{bmatrix}}{\begin{bmatrix}u\\v\end{bmatrix}}} or inversely, [ u v ] = [ cos ⁡ θ − sin ⁡ θ sin ⁡ θ cos ⁡ θ ] [ u ^ v ^ ] {\displaystyle {\begin{bmatrix}u\\v\end{bmatrix}}={\begin{bmatrix}\cos \theta &-\sin \theta \\\sin \theta &\cos \theta \end{bmatrix}}{\begin{bmatrix}{\hat {u}}\\{\hat {v}}\end{bmatrix}}} Then we have p θ ( u ^ ) = ∫ − ∞ ∞ d ( u , v ) d v ^ = ∫ − ∞ ∞ d ( u ^ cos ⁡ ( θ ) − v ^ sin ⁡ ( θ ) , u ^ sin ⁡ ( θ ) + v ^ cos ⁡ ( θ ) ) d v ^ {\displaystyle p_{\theta }({\hat {u}})=\int _{-\infty }^{\infty }d(u,v)\,\mathrm {d} {\hat {v}}=\int _{-\infty }^{\infty }d({\hat {u}}\cos(\theta )-{\hat {v}}\sin(\theta ),{\hat {u}}\sin(\theta )+{\hat {v}}\cos(\theta ))\,\mathrm {d} {\hat {v}}} By varying theta, a large number of projections can be obtained. Given the projection-slice theorem, D ( Ω , θ ) {\displaystyle D(\Omega ,\theta )} ,the slice of the Fourier transform of d ( u , v ) {\displaystyle d(u,v)} at angle theta, is equivalent to P θ ( Ω ) {\displaystyle P_{\theta }(\Omega )} , the Fourier Transform of the projection p θ ( u ^ ) {\displaystyle p_{\theta }({\hat {u}})} . Therefore, the unknown d ( u , v ) {\displaystyle d(u,v)} can be obtained from its Fourier transform by means of the Fourier transform inversion integral d ( u , v ) = 1 4 π 2 ∫ − ∞ ∞ ∫ − ∞ ∞ D ( Ω 1 , Ω 2 ) e j Ω 1 u e j Ω 2 v d Ω 1 , Ω 2 {\displaystyle \mathrm {d} (u,v)={\frac {1}{4\pi ^{2}}}\int _{-\infty }^{\infty }\int _{-\infty }^{\infty }D(\Omega _{1},\Omega _{2})e^{j\Omega _{1}u}e^{j\Omega _{2}v}\,\mathrm {d} \Omega _{1},\Omega _{2}} = 1 4 π 2 ∫ 0 ∞ ∫ − π π D ( Ω , θ ) e j Ω u cos ⁡ ( θ ) e j Ω v s i n θ | Ω | d Ω d θ {\displaystyle ={\frac {1}{4\pi ^{2}}}\int _{0}^{\infty }\int _{-\pi }^{\pi }D(\Omega ,\theta )e^{j\Omega u\cos(\theta )}e^{j\Omega vsin\theta }{\begin{vmatrix}\Omega \end{vmatrix}}\,\mathrm {d} \Omega \mathrm {d} \theta } = 1 4 π 2 ∫ − π π ∫ 0 ∞ P θ ( Ω ) e j Ω ( u cos ⁡ θ + v sin ⁡ θ ) | Ω | d Ω d θ {\displaystyle ={\frac {1}{4\pi ^{2}}}\int _{-\pi }^{\pi }\int _{0}^{\infty }P_{\theta }(\Omega )e^{j}\Omega (u\cos \theta +v\sin \theta ){\begin{vmatrix}\Omega \end{vmatrix}}\,\mathrm {d} \Omega \mathrm {d} \theta } = 1 4 π 2 ∫ 0 π ( ∫ − ∞ ∞ P θ ( Ω ) | Ω | {\displaystyle ={\frac {1}{4\pi ^{2}}}\int _{0}^{\pi }(\int _{-\infty }^{\infty }P_{\theta }(\Omega ){\begin{vmatrix}\Omega \end{vmatrix}}} e j Ω u ^ d Ω ) d θ {\displaystyle e^{j\Omega {\hat {u}}}\mathrm {d} \Omega )\mathrm {d} \theta } By taking the inverse Fourier Transform and assuming g ( u ^ ) = F − 1 ( | Ω | 2 ) {\displaystyle g({\hat {u}})={\mathcal {F}}^{-1}({{\begin{vmatrix}\Omega \end{vmatrix}}^{2}})} , we get d ( u , v ) = ∑ i △ θ i [ p θ ( u ^ ) ∗ g θ i ( u ^ ) ] {\displaystyle d(u,v)=\sum _{i}\vartriangle \theta _{i}[p_{\theta }({\hat {u}})g_{\theta i}({\hat {u}})]} == Approaches == In practice, there are a wide variety of methods that are utilized, most of which are reconstruct 3-D information (volume) from 2-D signals (image). Typically used methods are CT, MRI, PET and SPECT. And the filtered back projection based on the principles introduced above are commonly applied. === Computed Tomography (CT) === In CT, a volume is formed by stacking the axial slices. The software cuts the volume in a different plane (usually orthogonal). Commonly, slice data is generated using an X-ray source that rotates around the object. X-ray sensors are positioned on the opposite side of the circle from the X-ray source. === Magnetic resonance imaging (MRI) === In MRI, energy from an oscillating magnetic field is temporarily applied to the patient at the appropriate resonance frequency. The protons (hydrogen atoms) emit a radio frequency signal which is measured by a receiving coil. The radio signal can be made to encode position information by varying the main magnetic field using gradient coils. === Positron emission tomography (PET) === The system detects pairs of gamma rays emitted indirectly by a positron-emitting radionuclide (tracer), which is introduced into the body on a biologically active molecule. Three-dimensional images of tracer concentration within the body are then constructed by computer analysis. In modern PET-CT scanners, three dimensional imaging is often accomplished with the aid of a CT X-ray scan performed on the patient during the same session, in the same machine. === Single-photon emission computed tomography (SPECT) === SPECT imaging is performed by using a gamma camera to acquire multiple 2-D images (projections) from multiple angles. Multiple projections are used to yield a 3-D data set. This data set may then be manipulated to show thin slices along any chosen axis of the body. SPECT is similar to PET in its use of radioactive tracer material and detection of gamma rays, while the tracers used in SPECT emit gamma radiation that is measured more directly.
Read more →
Structural risk minimization

Structural risk minimization (SRM) is an inductive principle of use in machine learning. Commonly in machine learning, a generalized model must be selected from a finite data set, with the consequent problem of overfitting – the model becoming too strongly tailored to the particularities of the training set and generalizing poorly to new data. The SRM principle addresses this problem by balancing the model's complexity against its success at fitting the training data. This principle was first set out in a 1974 book by Vladimir Vapnik and Alexey Chervonenkis and uses the VC dimension. In practical terms, Structural Risk Minimization is implemented by minimizing E t r a i n + β H ( W ) {\displaystyle E_{train}+\beta H(W)} , where E t r a i n {\displaystyle E_{train}} is the train error, the function H ( W ) {\displaystyle H(W)} is called a regularization function, and β {\displaystyle \beta } is a constant. H ( W ) {\displaystyle H(W)} is chosen such that it takes large values on parameters W {\displaystyle W} that belong to high-capacity subsets of the parameter space. Minimizing H ( W ) {\displaystyle H(W)} in effect limits the capacity of the accessible subsets of the parameter space, thereby controlling the trade-off between minimizing the training error and minimizing the expected gap between the training error and test error. The SRM problem can be formulated in terms of data. Given n data points consisting of data x and labels y, the objective J ( θ ) {\displaystyle J(\theta )} is often expressed in the following manner: J ( θ ) = 1 2 n ∑ i = 1 n ( h θ ( x i ) − y i ) 2 + λ 2 ∑ j = 1 d θ j 2 {\displaystyle J(\theta )={\frac {1}{2n}}\sum _{i=1}^{n}(h_{\theta }(x^{i})-y^{i})^{2}+{\frac {\lambda }{2}}\sum _{j=1}^{d}\theta _{j}^{2}} The first term is the mean squared error (MSE) term between the value of the learned model, h θ {\displaystyle h_{\theta }} , and the given labels y {\displaystyle y} . This term is the training error, E t r a i n {\displaystyle E_{train}} , that was discussed earlier. The second term, places a prior over the weights, to favor sparsity and penalize larger weights. The trade-off coefficient, λ {\displaystyle \lambda } , is a hyperparameter that places more or less importance on the regularization term. Larger λ {\displaystyle \lambda } encourages sparser weights at the expense of a more optimal MSE, and smaller λ {\displaystyle \lambda } relaxes regularization allowing the model to fit to data. Note that as λ → ∞ {\displaystyle \lambda \to \infty } the weights become zero, and as λ → 0 {\displaystyle \lambda \to 0} , the model typically suffers from overfitting.
Read more →
Hybrid intelligent system

Hybrid intelligent system denotes a software system which employs, in parallel, a combination of methods and techniques from artificial intelligence subfields, such as: Neuro-symbolic systems Neuro-fuzzy systems Hybrid connectionist-symbolic models Fuzzy expert systems Connectionist expert systems Evolutionary neural networks Genetic fuzzy systems Rough fuzzy hybridization Reinforcement learning with fuzzy, neural, or evolutionary methods as well as symbolic reasoning methods. From the cognitive science perspective, every natural intelligent system is hybrid because it performs mental operations on both the symbolic and subsymbolic levels. For the past few years, there has been an increasing discussion of the importance of A.I. Systems Integration. Based on notions that there have already been created simple and specific AI systems (such as systems for computer vision, speech synthesis, etc., or software that employs some of the models mentioned above) and now is the time for integration to create broad AI systems. Proponents of this approach are researchers such as Marvin Minsky, Ron Sun, Aaron Sloman, Angelo Dalli and Michael A. Arbib. An example hybrid is a hierarchical control system in which the lowest, reactive layers are sub-symbolic. The higher layers, having relaxed time constraints, are capable of reasoning from an abstract world model and performing planning (even by hybrid wisdom). Intelligent systems usually rely on hybrid reasoning processes, which include induction, deduction, abduction and reasoning by analogy.
Read more →
Case-based reasoning

Case-based reasoning (CBR), broadly construed, is the process of solving new problems based on the solutions of similar past problems. In everyday life, an auto mechanic who fixes an engine by recalling another car that exhibited similar symptoms is using case-based reasoning. A lawyer who advocates a particular outcome in a trial based on legal precedents or a judge who creates case law is using case-based reasoning. So, too, an engineer copying working elements of nature (practicing biomimicry) is treating nature as a database of solutions to problems. Case-based reasoning is a prominent type of analogy solution making. It has been argued that case-based reasoning is not only a powerful method for computer reasoning, but also a pervasive behavior in everyday human problem solving; or, more radically, that all reasoning is based on past cases personally experienced. This view is related to prototype theory, which is most deeply explored in cognitive science. == Process == Case-based reasoning has been formalized for purposes of computer reasoning as a four-step process: Retrieve: Given a target problem, retrieve cases relevant to solving it from memory. A case consists of a problem, its solution, and, typically, annotations about how the solution was derived. For example, suppose Fred wants to prepare blueberry pancakes. Being a novice cook, the most relevant experience he can recall is one in which he successfully made plain pancakes. The procedure he followed for making the plain pancakes, together with justifications for decisions made along the way, constitutes Fred's retrieved case. Reuse: Map the solution from the previous case to the target problem. This may involve adapting the solution as needed to fit the new situation. In the pancake example, Fred must adapt his retrieved solution to include the addition of blueberries. Revise: Having mapped the previous solution to the target situation, test the new solution in the real world (or a simulation) and, if necessary, revise. Suppose Fred adapted his pancake solution by adding blueberries to the batter. After mixing, he discovers that the batter has turned blue – an undesired effect. This suggests the following revision: delay the addition of blueberries until after the batter has been ladled into the pan. Retain: After the solution has been successfully adapted to the target problem, store the resulting experience as a new case in memory. Fred, accordingly, records his new-found procedure for making blueberry pancakes, thereby enriching his set of stored experiences, and better preparing him for future pancake-making demands. == Comparison to other methods == At first glance, CBR may seem similar to the rule induction algorithms of machine learning. Like a rule-induction algorithm, CBR starts with a set of cases or training examples; it forms generalizations of these examples, albeit implicit ones, by identifying commonalities between a retrieved case and the target problem. If for instance a procedure for plain pancakes is mapped to blueberry pancakes, a decision is made to use the same basic batter and frying method, thus implicitly generalizing the set of situations under which the batter and frying method can be used. The key difference, however, between the implicit generalization in CBR and the generalization in rule induction lies in when the generalization is made. A rule-induction algorithm draws its generalizations from a set of training examples before the target problem is even known; that is, it performs eager generalization. For instance, if a rule-induction algorithm were given recipes for plain pancakes, Dutch apple pancakes, and banana pancakes as its training examples, it would have to derive, at training time, a set of general rules for making all types of pancakes. It would not be until testing time that it would be given, say, the task of cooking blueberry pancakes. The difficulty for the rule-induction algorithm is in anticipating the different directions in which it should attempt to generalize its training examples. This is in contrast to CBR, which delays (implicit) generalization of its cases until testing time – a strategy of lazy generalization. In the pancake example, CBR has already been given the target problem of cooking blueberry pancakes; thus it can generalize its cases exactly as needed to cover this situation. CBR therefore tends to be a good approach for rich, complex domains in which there are myriad ways to generalize a case. In law, there is often explicit delegation of CBR to courts, recognizing the limits of rule based reasons: limiting delay, limited knowledge of future context, limit of negotiated agreement, etc. While CBR in law and cognitively inspired CBR have long been associated, the former is more clearly an interpolation of rule based reasoning, and judgment, while the latter is more closely tied to recall and process adaptation. The difference is clear in their attitude toward error and appellate review. Another name for case-based reasoning in problem solving is symptomatic strategies. It does require à priori domain knowledge that is gleaned from past experience which established connections between symptoms and causes. This knowledge is referred to as shallow, compiled, evidential, history-based as well as case-based knowledge. This is the strategy most associated with diagnosis by experts. Diagnosis of a problem transpires as a rapid recognition process in which symptoms evoke appropriate situation categories. An expert knows the cause by virtue of having previously encountered similar cases. Case-based reasoning is the most powerful strategy, and that used most commonly. However, the strategy won't work independently with truly novel problems, or where deeper understanding of whatever is taking place is sought. An alternative approach to problem solving is the topographic strategy which falls into the category of deep reasoning. With deep reasoning, in-depth knowledge of a system is used. Topography in this context means a description or an analysis of a structured entity, showing the relations among its elements. Also known as reasoning from first principles, deep reasoning is applied to novel faults when experience-based approaches aren't viable. The topographic strategy is therefore linked to à priori domain knowledge that is developed from a more a fundamental understanding of a system, possibly using first-principles knowledge. Such knowledge is referred to as deep, causal or model-based knowledge. Hoc and Carlier noted that symptomatic approaches may need to be supported by topographic approaches because symptoms can be defined in diverse terms. The converse is also true – shallow reasoning can be used abductively to generate causal hypotheses, and deductively to evaluate those hypotheses, in a topographical search. == Criticism == Critics of CBR argue that it is an approach that accepts anecdotal evidence as its main operating principle. Without statistically relevant data for backing and implicit generalization, there is no guarantee that the generalization is correct. However, all inductive reasoning where data is too scarce for statistical relevance is inherently based on anecdotal evidence. == History == CBR traces its roots to the work of Roger Schank and his students at Yale University in the early 1980s. Schank's model of dynamic memory was the basis for the earliest CBR systems: Janet Kolodner's CYRUS and Michael Lebowitz's IPP. Other schools of CBR and closely allied fields emerged in the 1980s, which directed at topics such as legal reasoning, memory-based reasoning (a way of reasoning from examples on massively parallel machines), and combinations of CBR with other reasoning methods. In the 1990s, interest in CBR grew internationally, as evidenced by the establishment of an International Conference on Case-Based Reasoning in 1995, as well as European, German, British, Italian, and other CBR workshops. CBR technology has resulted in the deployment of a number of successful systems, the earliest being Lockheed's CLAVIER, a system for laying out composite parts to be baked in an industrial convection oven. CBR has been used extensively in applications such as the Compaq SMART system and has found a major application area in the health sciences, as well as in structural safety management. There is recent work that develops CBR within a statistical framework and formalizes case-based inference as a specific type of probabilistic inference. Thus, it becomes possible to produce case-based predictions equipped with a certain level of confidence. One description of the difference between CBR and induction from instances is that statistical inference aims to find what tends to make cases similar while CBR aims to encode what suffices to claim similarly.
Read more →
Spectral shape analysis

Spectral shape analysis relies on the spectrum (eigenvalues and/or eigenfunctions) of the Laplace–Beltrami operator to compare and analyze geometric shapes. Since the spectrum of the Laplace–Beltrami operator is invariant under isometries, it is well suited for the analysis or retrieval of non-rigid shapes, i.e. bendable objects such as humans, animals, plants, etc. == Laplace == The Laplace–Beltrami operator is involved in many important differential equations, such as the heat equation and the wave equation. It can be defined on a Riemannian manifold as the divergence of the gradient of a real-valued function f: Δ f := div ⁡ grad ⁡ f . {\displaystyle \Delta f:=\operatorname {div} \operatorname {grad} f.} Its spectral components can be computed by solving the Helmholtz equation (or Laplacian eigenvalue problem): Δ φ i + λ i φ i = 0. {\displaystyle \Delta \varphi _{i}+\lambda _{i}\varphi _{i}=0.} The solutions are the eigenfunctions φ i {\displaystyle \varphi _{i}} (modes) and corresponding eigenvalues λ i {\displaystyle \lambda _{i}} , representing a diverging sequence of positive real numbers. The first eigenvalue is zero for closed domains or when using the Neumann boundary condition. For some shapes, the spectrum can be computed analytically (e.g. rectangle, flat torus, cylinder, disk or sphere). For the sphere, for example, the eigenfunctions are the spherical harmonics. The most important properties of the eigenvalues and eigenfunctions are that they are isometry invariants. In other words, if the shape is not stretched (e.g. a sheet of paper bent into the third dimension), the spectral values will not change. Bendable objects, like animals, plants and humans, can move into different body postures with only minimal stretching at the joints. The resulting shapes are called near-isometric and can be compared using spectral shape analysis. == Discretizations == Geometric shapes are often represented as 2D curved surfaces, 2D surface meshes (usually triangle meshes) or 3D solid objects (e.g. using voxels or tetrahedra meshes). The Helmholtz equation can be solved for all these cases. If a boundary exists, e.g. a square, or the volume of any 3D geometric shape, boundary conditions need to be specified. Several discretizations of the Laplace operator exist (see Discrete Laplace operator) for the different types of geometry representations. Many of these operators do not approximate well the underlying continuous operator. == Spectral shape descriptors == === ShapeDNA and its variants === The ShapeDNA is one of the first spectral shape descriptors. It is the normalized beginning sequence of the eigenvalues of the Laplace–Beltrami operator. Its main advantages are the simple representation (a vector of numbers) and comparison, scale invariance, and in spite of its simplicity a very good performance for shape retrieval of non-rigid shapes. Competitors of shapeDNA include singular values of Geodesic Distance Matrix (SD-GDM) and Reduced BiHarmonic Distance Matrix (R-BiHDM). However, the eigenvalues are global descriptors, therefore the shapeDNA and other global spectral descriptors cannot be used for local or partial shape analysis. === Global point signature (GPS) === The global point signature at a point x {\displaystyle x} is a vector of scaled eigenfunctions of the Laplace–Beltrami operator computed at x {\displaystyle x} (i.e. the spectral embedding of the shape). The GPS is a global feature in the sense that it cannot be used for partial shape matching. === Heat kernel signature (HKS) === The heat kernel signature makes use of the eigen-decomposition of the heat kernel: h t ( x , y ) = ∑ i = 0 ∞ exp ⁡ ( − λ i t ) φ i ( x ) φ i ( y ) . {\displaystyle h_{t}(x,y)=\sum _{i=0}^{\infty }\exp(-\lambda _{i}t)\varphi _{i}(x)\varphi _{i}(y).} For each point on the surface the diagonal of the heat kernel h t ( x , x ) {\displaystyle h_{t}(x,x)} is sampled at specific time values t j {\displaystyle t_{j}} and yields a local signature that can also be used for partial matching or symmetry detection. === Wave kernel signature (WKS) === The WKS follows a similar idea to the HKS, replacing the heat equation with the Schrödinger wave equation. === Improved wave kernel signature (IWKS) === The IWKS improves the WKS for non-rigid shape retrieval by introducing a new scaling function to the eigenvalues and aggregating a new curvature term. === Spectral graph wavelet signature (SGWS) === SGWS is a local descriptor that is not only isometric invariant, but also compact, easy to compute and combines the advantages of both band-pass and low-pass filters. An important facet of SGWS is the ability to combine the advantages of WKS and HKS into a single signature, while allowing a multiresolution representation of shapes. == Spectral Matching == The spectral decomposition of the graph Laplacian associated with complex shapes (see Discrete Laplace operator) provides eigenfunctions (modes) which are invariant to isometries. Each vertex on the shape could be uniquely represented with a combinations of the eigenmodal values at each point, sometimes called spectral coordinates: s ( x ) = ( φ 1 ( x ) , φ 2 ( x ) , … , φ N ( x ) ) for vertex x . {\displaystyle s(x)=(\varphi _{1}(x),\varphi _{2}(x),\ldots ,\varphi _{N}(x)){\text{ for vertex }}x.} Spectral matching consists of establishing the point correspondences by pairing vertices on different shapes that have the most similar spectral coordinates. Early work focused on sparse correspondences for stereoscopy. Computational efficiency now enables dense correspondences on full meshes, for instance between cortical surfaces. Spectral matching could also be used for complex non-rigid image registration, which is notably difficult when images have very large deformations. Such image registration methods based on spectral eigenmodal values indeed capture global shape characteristics, and contrast with conventional non-rigid image registration methods which are often based on local shape characteristics (e.g., image gradients).
Read more →
Pattern theory

Pattern theory, formulated by Ulf Grenander, is a mathematical formalism to describe knowledge of the world as patterns. It differs from other approaches to artificial intelligence in that it does not begin by prescribing algorithms and machinery to recognize and classify patterns; rather, it prescribes a vocabulary to articulate and recast the pattern concepts in precise language. Broad in its mathematical coverage, Pattern Theory spans algebra and statistics, as well as local topological and global entropic properties. In addition to the new algebraic vocabulary, its statistical approach is novel in its aim to: Identify the hidden variables of a data set using real world data rather than artificial stimuli, which was previously commonplace. Formulate prior distributions for hidden variables and models for the observed variables that form the vertices of a Gibbs-like graph. Study the randomness and variability of these graphs. Create the basic classes of stochastic models applied by listing the deformations of the patterns. Synthesize (sample) from the models, not just analyze signals with them. The Brown University Pattern Theory Group was formed in 1972 by Ulf Grenander. Many mathematicians are currently working in this group, noteworthy among them being the Fields Medalist David Mumford. Mumford regards Grenander as his "guru" in Pattern Theory.
Read more →
AI washing

AI washing is a deceptive marketing tactic that consists of promoting a product or a service by overstating the role of artificial intelligence (AI) and the integration of it. Companies often involve in the practice to mislead customers to boost their offerings, and to secure funding from investors. The practice raises concerns regarding transparency, and legal issues. == Definition == AI washing is a deceptive marketing practice. It involves promoting a product or a service by overstating the role of artificial intelligence (AI) and its integration in the design and manufacture of the same. The practice raises concerns regarding transparency, compliance with security regulations, and consumer trust in the AI industry potentially hampering legitimate advancements in AI. The term was first defined by the AI Now Institute, a research institute based at New York University in 2019. The term is derived from greenwashing, another deceptive marketing technique that misrepresents a product's environmental impact in a similar manner. AI washing might involve a company claiming to have used AI in the development or enhancement of its products or services without its actual involvement, or using buzzwords such as "smart" or "AI-powered" without the product actually offering it or making use of it. A company may overstate the usage of AI or misuse the term, which is also construed as AI washing. In 2026, The Washington Post defined AI washing as "a trend for bosses to blame layoffs on the productive capabilities of AI and its ability to replace workers, even when job cuts may have little to do with the technology". == Usage and effects == AI washing can lead to deception of customers and misleading of investors. It is also an illegal and unethical practice that lacks transparency regarding disclosing the details of a product or a service. Companies get involved in such a practice often in response to competition who might have used AI in their offerings. It might also be used as a ploy to secure funding and investment, assuming that it will attract them towards it. AI washing has been compared to dot-com bubble, when businesses appended "dot-com" to the end of the business name to boost their valuation. In September 2023, Coca-Cola released a new product called Coca-Cola Y3000, and the company stated that the Y3000 flavor had been "co-created with human and artificial intelligence". The company was accused of AI washing due to no proof of AI involvement in the creation of the product, and critics believed that AI was used as a way to grab consumer attention more than it was used in the actual product creation. In 2026, mass tech layoffs were attributed to AI washing from AI innovation instead of balance sheet restructuring. == Mitigation == Companies are expected to be transparent and clearer in communicating the usage of AI in their products or services. Consumers can mitigate the same by requesting for hard evidence from the companies regarding the usage of AI tools. Customers should evaluate the product or service as a whole rather than being swayed by the usage of AI. Informed decision making and purchasing can keep them from falling for such marketing gimmicks. The United States Securities and Exchange Commission (SEC) imposes penalties for companies indulging in such practices. In March 2024, the SEC imposed the first civil penalties on two companies for misleading statements about their use of AI, and in July 2024, it charged a corporate executive from a supposed AI hiring startup with fraud for the usage of buzzwords related to AI.
Read more →
Smart object

A smart object is an object that enhances the interaction with not only people but also with other smart objects. Also known as smart connected products or smart connected things (SCoT), they are products, assets and other things embedded with processors, sensors, software and connectivity that allow data to be exchanged between the product and its environment, manufacturer, operator/user, and other products and systems. Connectivity also enables some capabilities of the product to exist outside the physical device, in what is known as the product cloud. The data collected from these products can be then analysed to inform decision-making, enable operational efficiencies and continuously improve the performance of the product. It can not only refer to interaction with physical world objects but also to interaction with virtual (computing environment) objects. A smart physical object may be created either as an artifact or manufactured product or by embedding electronic tags such as RFID tags or sensors into non-smart physical objects. Smart virtual objects are created as software objects that are intrinsic when creating and operating a virtual or cyber world simulation or game. The concept of a smart object has several origins and uses, see History. There are also several overlapping terms, see also smart device, tangible object or tangible user interface and Thing as in the Internet of things. == History == In the early 1990s, Mark Weiser, from whom the term ubiquitous computing originated, referred to a vision "When almost every object either contains a computer or can have a tab attached to it, obtaining information will be trivial", Although Weiser did not specifically refer to an object as being smart, his early work did imply that smart physical objects are smart in the sense that they act as digital information sources. Hiroshi Ishii and Brygg Ullmer refer to tangible objects in terms of tangibles bits or tangible user interfaces that enable users to "grasp & manipulate" bits in the center of users' attention by coupling the bits with everyday physical objects and architectural surfaces. The smart object concept was introduced by Marcelo Kallman and Daniel Thalmann as an object that can describe its own possible interactions. The main focus here is to model interactions of smart virtual objects with virtual humans, agents, in virtual worlds. The opposite approach to smart objects is 'plain' objects that do not provide this information. The additional information provided by this concept enables far more general interaction schemes, and can greatly simplify the planner of an artificial intelligence agent. In contrast to smart virtual objects used in virtual worlds, Lev Manovich focuses on physical space filled with electronic and visual information. Here, "smart objects" are described as "objects connected to the Net; objects that can sense their users and display smart behaviour". More recently in the early 2010s, smart objects are being proposed as a key enabler for the vision of the Internet of things. The combination of the Internet and emerging technologies such as near field communications, real-time localization, and embedded sensors enables everyday objects to be transformed into smart objects that can understand and react to their environment. Such objects are building blocks for the Internet of things and enable novel computing applications. In 2018, one of the world's first smart houses was built in Klaukkala, Finland in the form of a five-floor apartment block, using the Kone Residential Flow solution created by KONE, allowing even a smartphone to act as a home key. == Characteristics == Although we can view interaction with physical smart object in the physical world as distinct from interaction with virtual smart objects in a virtual simulated world, these can be related. Poslad considers the progression of: how humans use models of smart objects situated in the physical world to enhance human to physical world interaction; versus how smart physical objects situated in the physical world can model human interaction in order to lessen the need for human to physical world interaction; versus how virtual smart objects by modelling both physical world objects and modelling humans as objects and their subsequent interactions can form a predominantly smart virtual object environment. === Smart physical objects === The concept smart for a smart physical object simply means that it is active, digital, networked, can operate to some extent autonomously, is reconfigurable and has local control of the resources it needs such as energy, data storage, etc. Note, a smart object does not necessarily need to be intelligent as in exhibiting a strong essence of artificial intelligence—although it can be designed to also be intelligent. Physical world smart objects can be described in terms of three properties: Awareness: is a smart object's ability to understand (that is, sense, interpret, and react to) events and human activities occurring in the physical world. Representation: refers to a smart object's application and programming model—in particular, programming abstractions. Interaction: denotes the object's ability to converse with the user in terms of input, output, control, and feedback. Based upon these properties, these have been classified into three types: Activity-Aware Smart Objects: Are objects that can record information about work activities and its own use. Policy-Aware Smart Objects: Are objects that are activity-aware Objects can interpret events and activities with respect to predefined organizational policies. Process-Aware Smart Objects: Processes play a fundamental role in industrial work management and operation. A process is a collection of related activities or tasks that are ordered according to their position in time and space. === Smart virtual objects === For the virtual object in a virtual world case, an object is called smart when it has the ability to describe its possible interactions. This focuses on constructing a virtual world using only virtual objects that contain their own interaction information. There are four basic elements to constructing such a smart virtual object framework. Object properties: physical properties and a text description Interaction information: position of handles, buttons, grips, and the like Object behavior: different behaviors based on state variables Agent behaviors: description of the behavior an agent should follow when using the object Some versions of smart objects also include animation information in the object information, but this is not considered to be an efficient approach, since this can make objects inappropriately oversized. === Categorization === The terms smart, connected product or smart product can be confusing as it is used to cover a broad range of different products, ranging from smart home appliances (e.g., smart bathroom scales or smart light bulbs) to smart cars (e.g., Tesla). While these products share certain similarities, they often differ substantially in their capabilities. Raff et al. developed a conceptual framework that distinguishes different smart products based on their capabilities, which features 4 types of smart product archetypes (in ascending order of "smartness"). Digital Connected Responsive Intelligent == Advantages == Smart, connected products have three primary components: Physical – made up of the product's mechanical and electrical parts. Smart – made up of sensors, microprocessors, data storage, controls, software, and an embedded operating system with enhanced user interface. Connectivity – made up of ports, antennae, and protocols enabling wired/wireless connections that serve two purposes, it allows data to be exchanged with the product and enables some functions of the product to exist outside the physical device. Each component expands the capabilities of one another resulting in "a virtuous cycle of value improvement". First, the smart components of a product amplify the value and capabilities of the physical components. Then, connectivity amplifies the value and capabilities of the smart components. These improvements include: Monitoring of the product's conditions, its external environment, and its operations and usage. Control of various product functions to better respond to changes in its environment, as well as to personalize the user experience. Optimization of the product's overall operations based on actual performance data, and reduction of downtimes through predictive maintenance and remote service. Autonomous product operation, including learning from their environment, adapting to users' preferences and self-diagnosing and service. === The Internet of things (IoT) === The Internet of things is the network of physical objects that contain embedded technology to communicate and sense or interact with their internal states or the external environment. The phrase "Internet of things" reflects the gro
Read more →
Django (web framework)

Django ( JANG-goh; sometimes stylized as django) is a free and open-source, Python-based web framework that runs on a web server. It follows the model–template–views (MTV) architectural pattern. It is maintained by the Django Software Foundation (DSF), an independent organization established in the US as a 501(c)(3) non-profit. Django's primary goal is to ease the creation of complex, database-driven websites. The framework emphasizes reusability and "pluggability" of components, less code, low coupling, rapid development, and the principle of don't repeat yourself. Python is used throughout, even for settings, files, and data models. Django also provides an optional administrative create, read, update and delete interface that is generated dynamically through introspection and configured via admin models. Some well-known sites that use Django include Instagram, Mozilla, Disqus, Bitbucket, Nextdoor, and Clubhouse. == History == Django was created in the autumn of 2003, when the web programmers at the Lawrence Journal-World newspaper, Adrian Holovaty and Simon Willison, began using Python to build applications. Jacob Kaplan-Moss was hired early in Django's development shortly before Willison's internship ended. It was released publicly under a BSD license in July 2005. The framework was named after guitarist Django Reinhardt. Holovaty is a romani jazz guitar player inspired in part by Reinhardt's music. In June 2008, it was announced that a newly formed Django Software Foundation (DSF) would maintain Django in the future. == Features == === Components === Despite having its own nomenclature, such as naming the callable objects generating the HTTP responses "views", the core Django framework can be seen as an MVC architecture. It consists of an object-relational mapper (ORM) that mediates between data models (defined as Python classes) and a relational database ("Model"), a system for processing HTTP requests with a web templating system ("View"), and a regular-expression-based URL dispatcher ("Controller"). Also included in the core framework are: a lightweight and standalone web server for development and testing a form serialization and validation system that can translate between HTML forms and values suitable for storage in the database a template system that utilizes the concept of inheritance borrowed from object-oriented programming a caching framework that can use any of several cache methods support for middleware classes that can intervene at various stages of request processing and carry out custom functions an internal dispatcher system that allows components of an application to communicate events to each other via pre-defined signals an internationalization system, including translations of Django's own components into a variety of languages a serialization system that can produce and read XML and/or JSON representations of Django model instances a system for extending the capabilities of the template engine an interface to Python's built-in unit test framework === Bundled applications === The main Django distribution also bundles a number of applications in its "contrib" package, including: an extensible authentication system the dynamic administrative interface tools for generating RSS and Atom syndication feeds a "Sites" framework that allows one Django installation to run multiple websites, each with their own content and applications tools for generating Sitemaps built-in mitigation for cross-site request forgery, cross-site scripting, SQL injection, password cracking and other typical web attacks, most of them turned on by default a framework for creating geographic information system (GIS) applications === Extensibility === Django's configuration system allows third-party code to be plugged into a regular project, provided that it follows the reusable app conventions. More than 5000 packages are available to extend the framework's original behavior, providing solutions to issues the original tool didn't tackle: registration, search, API provision and consumption, CMS, etc. This extensibility is, however, mitigated by internal components' dependencies. While the Django philosophy implies loose coupling, the template filters and tags assume one engine implementation, and both the auth and admin bundled applications require the use of the internal ORM. None of these filters or bundled apps are mandatory to run a Django project, but reusable apps tend to depend on them, encouraging developers to keep using the official stack in order to benefit fully from the apps ecosystem. === Server arrangements === Django can be run on ASGI or WSGI-compliant web servers. Django officially supports five database backends: PostgreSQL, MySQL, MariaDB, SQLite, and Oracle. Microsoft SQL Server can be used with mssql-django. == Version history == The Django team will occasionally designate certain releases to be "long-term support" (LTS) releases. LTS releases will get security and data loss fixes applied for a guaranteed period of time, typically 3+ years, regardless of the pace of releases afterwards. == Community == === DjangoCon === There is a semiannual conference for Django developers and users, named "DjangoCon", that has been held since September 2008. DjangoCon is held annually in Europe, in May or June; while another is held in the United States in August or September, in various cities. ==== United States ==== The 2012 DjangoCon took place in Washington, D.C., from September 3 to 8. 2013 DjangoCon was held in Chicago at the Hyatt Regency Hotel and the post-conference Sprints were hosted at Digital Bootcamp, computer training center. The 2014 DjangoCon US returned to Portland, OR from August 30 to 6 September. The 2015 DjangoCon US was held in Austin, TX from September 6 to 11 at the AT&T Executive Center. The 2016 DjangoCon US was held in Philadelphia, PA at The Wharton School of the University of Pennsylvania from July 17 to 22. The 2017 DjangoCon US was held in Spokane, WA; in 2018 DjangoCon US was held in San Diego, CA. DjangoCon US 2019 was held again in San Diego, CA from September 22 to 27. DjangoCon 2021 took place virtually and in 2022, DjangoCon US returned to San Diego from October 16 to 21. DjangoCon US 2023 was held from October 16 to 20 at the Durham, NC convention center and DjangoCon US 2024 took place also in Durham in September 22 to 27. DjangoCon US 2025 was held from September 8 to 12 in Chicago, Illinois. ==== Europe ==== The 2025 edition of DjangoCon Europe took place in Dublin, Ireland from 23 to 27 April. In 2024, the conference was hosted in Vigo, Spain. Edinburgh, Scotland served as the venue for DjangoCon Europe in 2023. The 2022 conference was organized in Porto, Portugal. In 2021, DjangoCon Europe was held virtually due to the COVID-19 pandemic. The 2020 edition was also conducted as a fully virtual event. DjangoCon Europe 2019 was held in Copenhagen, Denmark. In 2018, the event took place in Heidelberg, Germany. The 2017 conference was convened in Florence, Italy. DjangoCon Europe 2012 was organized in Zurich, Switzerland. ==== Australia ==== Django mini-conferences are usually held every year as part of the Australian Python Conference 'PyCon AU'. Previously, these mini-conferences have been held in: Hobart, Australia, in July 2013, Brisbane, Australia, in August 2014 and 2015, Melbourne, Australia in August 2016 and 2017, and Sydney, Australia, in August 2018 and 2019. ==== Africa ==== The first DjangoCon Africa was held in Zanzibar, Tanzania, from 6 to 11 November 2023. The event hosted approximately 200 attendees from 22 countries, including 103 women. The conference featured 26 talks on topics such as software development, education, careers, accessibility, and agriculture, often highlighting perspectives from across the African continent. Future editions of the conference are planned, with details available on the official website === Community groups & programs === Django has spawned user groups and meetups around the world, a notable group is the Django Girls organization, which began in Poland but now has had events in 91 countries. Another initiative is Djangonaut Space, a mentorship program aimed at supporting new contributors to the Django ecosystem. The program pairs experienced mentors with developers to guide them through making meaningful contributions to Django and its community. It emphasizes long-term engagement, inclusion, and collaborative open-source development. == Ports to other languages == Programmers have ported Django's template engine design from Python to other languages, providing decent cross-platform support. Some of these options are more direct ports; others, though inspired by Django and retaining its concepts, take the liberty to deviate from Django's design: Liquid for Ruby Template::Swig for Perl Twig for PHP and JavaScript Jinja for Python ErlyDTL for Erlang == CMSs based on Django Framework == Django as a framework is capable of building a complete CMS
Read more →
Labeled data

Labeled data is a group of samples that have been tagged with one or more labels. Labeling typically takes a set of unlabeled data and augments each piece of it with informative tags called judgments. For example, a data label might indicate whether a photo contains a horse or a cow, which words were uttered in an audio recording, what type of action is being performed in a video, what the topic of a news article is, what the overall sentiment of a tweet is, or whether a dot in an X-ray is a tumor. Labels can be obtained by having humans make judgments about a given piece of unlabeled data. Labeled data is significantly more expensive to obtain than the raw unlabeled data. The quality of labeled data directly influences the performance of supervised machine learning models in operation, as these models learn from the provided labels. == Crowdsourced labeled data == In 2006, Fei-Fei Li, the co-director of the Stanford Human-Centered AI Institute, initiated research to improve the artificial intelligence models and algorithms for image recognition by significantly enlarging the training data. The researchers downloaded millions of images from the World Wide Web and a team of undergraduates started to apply labels for objects to each image. In 2007, Li outsourced the data labeling work on Amazon Mechanical Turk, an online marketplace for digital piece work. The 3.2 million images that were labeled by more than 49,000 workers formed the basis for ImageNet, one of the largest hand-labeled database for outline of object recognition. == Automated data labelling == After obtaining a labeled dataset, machine learning models can be applied to the data so that new unlabeled data can be presented to the model and a likely label can be guessed or predicted for that piece of unlabeled data. == Challenges == === Data-driven bias === Algorithmic decision-making is subject to programmer-driven bias as well as data-driven bias. Training data that relies on bias labeled data will result in prejudices and omissions in a predictive model, despite the machine learning algorithm being legitimate. The labeled data used to train a specific machine learning algorithm needs to be a statistically representative sample to not bias the results. For example, in facial recognition systems underrepresented groups are subsequently often misclassified if the labeled data available to train has not been representative of the population,. In 2018, a study by Joy Buolamwini and Timnit Gebru demonstrated that two facial analysis datasets that have been used to train facial recognition algorithms, IJB-A and Adience, are composed of 79.6% and 86.2% lighter skinned humans respectively. === Human error and inconsistency === Human annotators are prone to errors and biases when labeling data. This can lead to inconsistent labels and affect the quality of the data set. The inconsistency can affect the machine learning model's ability to generalize well. === Domain expertise === Certain fields, such as legal document analysis or medical imaging, require annotators with specialized domain knowledge. Without the expertise, the annotations or labeled data may be inaccurate, negatively impacting the machine learning model's performance in a real-world scenario.
Read more →
Learnable function class

In statistical learning theory, a learnable function class is a set of functions for which an algorithm can be devised to asymptotically minimize the expected risk, uniformly over all probability distributions. The concept of learnable classes are closely related to regularization in machine learning, and provides large sample justifications for certain learning algorithms. == Definition == === Background === Let Ω = X × Y = { ( x , y ) } {\displaystyle \Omega ={\mathcal {X}}\times {\mathcal {Y}}=\{(x,y)\}} be the sample space, where y {\displaystyle y} are the labels and x {\displaystyle x} are the covariates (predictors). F = { f : X ↦ Y } {\displaystyle {\mathcal {F}}=\{f:{\mathcal {X}}\mapsto {\mathcal {Y}}\}} is a collection of mappings (functions) under consideration to link x {\displaystyle x} to y {\displaystyle y} . L : Y × Y ↦ R {\displaystyle L:{\mathcal {Y}}\times {\mathcal {Y}}\mapsto \mathbb {R} } is a pre-given loss function (usually non-negative). Given a probability distribution P ( x , y ) {\displaystyle P(x,y)} on Ω {\displaystyle \Omega } , define the expected risk I P ( f ) {\displaystyle I_{P}(f)} to be: I P ( f ) = ∫ L ( f ( x ) , y ) d P ( x , y ) {\displaystyle I_{P}(f)=\int L(f(x),y)dP(x,y)} The general goal in statistical learning is to find the function in F {\displaystyle {\mathcal {F}}} that minimizes the expected risk. That is, to find solutions to the following problem: f ^ = arg ⁡ min f ∈ F I P ( f ) {\displaystyle {\hat {f}}=\arg \min _{f\in {\mathcal {F}}}I_{P}(f)} But in practice the distribution P {\displaystyle P} is unknown, and any learning task can only be based on finite samples. Thus we seek instead to find an algorithm that asymptotically minimizes the empirical risk, i.e., to find a sequence of functions { f ^ n } n = 1 ∞ {\displaystyle \{{\hat {f}}_{n}\}_{n=1}^{\infty }} that satisfies lim n → ∞ P ( I P ( f ^ n ) − inf f ∈ F I P ( f ) > ϵ ) = 0 {\displaystyle \lim _{n\rightarrow \infty }\mathbb {P} (I_{P}({\hat {f}}_{n})-\inf _{f\in {\mathcal {F}}}I_{P}(f)>\epsilon )=0} One usual algorithm to find such a sequence is through empirical risk minimization. === Learnable function class === We can make the condition given in the above equation stronger by requiring that the convergence is uniform for all probability distributions. That is: The intuition behind the more strict requirement is as such: the rate at which sequence { f ^ n } {\displaystyle \{{\hat {f}}_{n}\}} converges to the minimizer of the expected risk can be very different for different P ( x , y ) {\displaystyle P(x,y)} . Because in real world the true distribution P {\displaystyle P} is always unknown, we would want to select a sequence that performs well under all cases. However, by the no free lunch theorem, such a sequence that satisfies (1) does not exist if F {\displaystyle {\mathcal {F}}} is too complex. This means we need to be careful and not allow too "many" functions in F {\displaystyle {\mathcal {F}}} if we want (1) to be a meaningful requirement. Specifically, function classes that ensure the existence of a sequence { f ^ n } {\displaystyle \{{\hat {f}}_{n}\}} that satisfies (1) are known as learnable classes. It is worth noting that at least for supervised classification and regression problems, if a function class is learnable, then the empirical risk minimization automatically satisfies (1). Thus in these settings not only do we know that the problem posed by (1) is solvable, we also immediately have an algorithm that gives the solution. == Interpretations == If the true relationship between y {\displaystyle y} and x {\displaystyle x} is y ∼ f ∗ ( x ) {\displaystyle y\sim f^{}(x)} , then by selecting the appropriate loss function, f ∗ {\displaystyle f^{}} can always be expressed as the minimizer of the expected loss across all possible functions. That is, f ∗ = arg ⁡ min f ∈ F ∗ I P ( f ) {\displaystyle f^{}=\arg \min _{f\in {\mathcal {F}}^{}}I_{P}(f)} Here we let F ∗ {\displaystyle {\mathcal {F}}^{}} be the collection of all possible functions mapping X {\displaystyle {\mathcal {X}}} onto Y {\displaystyle {\mathcal {Y}}} . f ∗ {\displaystyle f^{}} can be interpreted as the actual data generating mechanism. However, the no free lunch theorem tells us that in practice, with finite samples we cannot hope to search for the expected risk minimizer over F ∗ {\displaystyle {\mathcal {F}}^{}} . Thus we often consider a subset of F ∗ {\displaystyle {\mathcal {F}}^{}} , F {\displaystyle {\mathcal {F}}} , to carry out searches on. By doing so, we risk that f ∗ {\displaystyle f^{}} might not be an element of F {\displaystyle {\mathcal {F}}} . This tradeoff can be mathematically expressed as In the above decomposition, part ( b ) {\displaystyle (b)} does not depend on the data and is non-stochastic. It describes how far away our assumptions ( F {\displaystyle {\mathcal {F}}} ) are from the truth ( F ∗ {\displaystyle {\mathcal {F}}^{}} ). ( b ) {\displaystyle (b)} will be strictly greater than 0 if we make assumptions that are too strong ( F {\displaystyle {\mathcal {F}}} too small). On the other hand, failing to put enough restrictions on F {\displaystyle {\mathcal {F}}} will cause it to be not learnable, and part ( a ) {\displaystyle (a)} will not stochastically converge to 0. This is the well-known overfitting problem in statistics and machine learning literature. == Example: Tikhonov regularization == A good example where learnable classes are used is the so-called Tikhonov regularization in reproducing kernel Hilbert space (RKHS). Specifically, let F ∗ {\displaystyle {\mathcal {F^{}}}} be an RKHS, and | | ⋅ | | 2 {\displaystyle ||\cdot ||_{2}} be the norm on F ∗ {\displaystyle {\mathcal {F^{}}}} given by its inner product. It is shown in that F = { f : | | f | | 2 ≤ γ } {\displaystyle {\mathcal {F}}=\{f:||f||_{2}\leq \gamma \}} is a learnable class for any finite, positive γ {\displaystyle \gamma } . The empirical minimization algorithm to the dual form of this problem is arg ⁡ min f ∈ F ∗ { ∑ i = 1 n L ( f ( x i ) , y i ) + λ | | f | | 2 } {\displaystyle \arg \min _{f\in {\mathcal {F}}^{}}\left\{\sum _{i=1}^{n}L(f(x_{i}),y_{i})+\lambda ||f||_{2}\right\}} This was first introduced by Tikhonov to solve ill-posed problems. Many statistical learning algorithms can be expressed in such a form (for example, the well-known ridge regression). The tradeoff between ( a ) {\displaystyle (a)} and ( b ) {\displaystyle (b)} in (2) is geometrically more intuitive with Tikhonov regularization in RKHS. We can consider a sequence of { F γ } {\displaystyle \{{\mathcal {F}}_{\gamma }\}} , which are essentially balls in F ∗ {\displaystyle {\mathcal {F^{}}}} with centers at 0. As γ {\displaystyle \gamma } gets larger, F γ {\displaystyle {\mathcal {F}}_{\gamma }} gets closer to the entire space, and ( b ) {\displaystyle (b)} is likely to become smaller. However we will also suffer smaller convergence rates in ( a ) {\displaystyle (a)} . The way to choose an optimal γ {\displaystyle \gamma } in finite sample settings is usually through cross-validation. == Relationship to empirical process theory == Part ( a ) {\displaystyle (a)} in (2) is closely linked to empirical process theory in statistics, where the empirical risk { ∑ i = 1 n L ( y i , f ( x i ) ) , f ∈ F } {\displaystyle \{\sum _{i=1}^{n}L(y_{i},f(x_{i})),f\in {\mathcal {F}}\}} are known as empirical processes. In this field, the function class F {\displaystyle {\mathcal {F}}} that satisfies the stochastic convergence are known as uniform Glivenko–Cantelli classes. It has been shown that under certain regularity conditions, learnable classes and uniformly Glivenko-Cantelli classes are equivalent. Interplay between ( a ) {\displaystyle (a)} and ( b ) {\displaystyle (b)} in statistics literature is often known as the bias-variance tradeoff. However, note that in the authors gave an example of stochastic convex optimization for General Setting of Learning where learnability is not equivalent with uniform convergence.
Read more →