AI Essay Bypass

AI Essay Bypass — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

• 

  Verbal overshadowing

  Verbal overshadowing is a phenomenon where giving a verbal description of sensory input impairs formation of memories of that input. This was first reported by Schooler and Engstler-Schooler (1990) where it was shown that the effects can be observed across multiple domains of cognition which are known to rely on non-verbal knowledge and perceptual expertise. One example of this is memory, which has been known to be influenced by language. Seminal work by Carmichael and collaborators (1932) demonstrated that when verbal labels are connected to non-verbal forms during an individual's encoding process, it could potentially bias the way those forms are reproduced. Because of this, memory performance relying on reportable aspects of memory that encode visual forms should be vulnerable to the effects of verbalization. == Initial findings == Schooler and Engstler-Schooler (1990) were the first to report findings of verbal overshadowing. In their study, participants watched a video of a simulated robbery and were instructed to either verbally describe the robber or engage in a control task. Those who engaged in giving a verbal description were less likely to correctly identify the robber from a test lineup, compared to those who engaged in the control task. A larger effect was detected when the verbal description was provided 20, rather than 5, minutes after the video, and immediately before the test lineup. A meta-analysis by Meissner and Brigham (2001) supported the effects of verbal overshadowing, showing a small but reliably negative effect. == General effects of verbal overshadowing == The effects of verbal overshadowing have been generalized across multiple domains of cognition that are known to rely on non-verbal knowledge and perceptual expertise, such as memory. Memory has been known to be influenced by language. Seminal work by Carmichael and collaborators (1932) demonstrated that labels attached to, or associated with, non-verbal forms during memory encoding can affect the way the forms were subsequently reproduced. Because of this, memory performance that relies on reportable aspects of memory that encode visual forms should be vulnerable to the effects of verbalization. Pelizzon, Brandimonte, and Luccio (2002) found that visual memory representations appear to incorporate visual, spatial, and temporal characteristics. It is explained as follows: With the temporal code (where the only information available is the sequence of the stimuli), performance levels remain high, unless participants are required to retrieve the stimuli in a different order from that used at encoding (visual cue). In this case, performance is significantly impaired, even in the presence of a visual cue. The study showed that order information acts as a link between the two separate representations of figure and background, hence preventing verbal overshadowing at encoding (temporal component) or attenuating its influence at retrieval (spatial component).(p. 960) Hatano, Ueno, Kitagami, and Kawaguchi found that verbal overshadowing is likely to occur when participants verbally described targets in detail. Detailed verbal descriptions resulted in more frequently inaccurate descriptions that in turn created inaccurate representations in the memories of participants. Inaccuracies are also likely to occur when face recognition comes immediately after verbalization. Other forms of non-verbal knowledge affected by verbal overshadowing include the following: [Verbal overshadowing] has also been observed when participants attempt to generate descriptions of other 'difficult-to-describe' stimuli such as colors (Schooler and Engstler-Schooler, 1990) or abstract figures (Brandimonte et al., 1997), or other non-visual tasks such as wine tasting (Melcher and Schooler, 1996), decision making (Wilson and Schooler, 1991), and insight problem-solving. (p. 871) (Schooler et al., 1993) Verbalization of stimuli leads to the disruption of non-reportable processes that are necessary for achieving insight solutions, which are distinct from language processes. Schooler, Ohlsson, and Brooks (1993) found that face recognition requires information that cannot be adequately verbalized, giving rise to difficulty in describing factors in recognition judgments. Subjects were less effective in solving insight problems when compelled to put their thoughts in words, which suggests that language may interfere with thought. The verbal overshadowing effect was not seen when participants engaged in articulatory suppression. Performance was reduced in both the verbal and non-verbal description conditions. This is evidence that verbal encoding plays a role in face recognition. By testing with distracting faces presented between study and test, Lloyd-Jones and Brown (2008) suggested a dual-process approach to recognition memory took place, that verbalization influenced familiarity-based processes at first, but its effects were later seen on recollection, when discrimination between items became more difficult. == Verbal overshadowing in facial recognition == The verbal overshadowing effect can be found for facial recognition because faces are predominately processed in a holistic or configurable manner. (Tanaka & Farah, 1993; Tanaka & Sengco, 1997) Verbalizing one's memory for a face is done using a featural or analytic strategy, leading to a drift from the configurable information about the face and to impaired recognition performance. However, Fallshore & Schooler (1995) found that the verbal overshadowing effect was not found when participants described faces of races different from their own. A study by Brown and Lloyd-Jones (2003) found that there was no verbal overshadowing effect found in car descriptions; it was only seen in facial descriptions. The authors noted that descriptions were no different on any measure including accuracy. It is suggested that less expertise in verbalizing faces rather than cars invokes a stronger shift in verbal and featural processing. This supports the concept of a transfer inappropriate retrieval framework and addresses some limitations of the effect. Wickham and Swift (2006) suggested that the verbal overshadowing effect is not seen in describing all faces, and one aspect that determines this is distinctiveness. Results showed that typical faces produce verbal overshadowing, while distinctive faces did not. In studies of eyewitness reports, variation in response criteria given by participants influenced the quality of the descriptions generated and accuracy on identification task, known as the retrieval-based effect. Face recognition was also impaired when subjects described a familiar face, such as a parent, or when describing a previously seen but novel face. Dodson, Johnson, and Schooler (1997) found that recognition was also impaired when participants were provided with a description of a previously seen face, and they were able to ignore provided versus self-generated descriptions more easily. This finding of verbal overshadowing suggested that eyewitness recognition is not only affected by their own descriptions, but of descriptions heard from others, such other eyewitness testimonies. == Voice recognition == The verbal overshadowing effect has also been found to affect voice identification. Research shows that describing a non-verbal stimuli leads to a decrease in recognition accuracy. In an unpublished study by Schooler, Fiore, Melcher, and Ambadar (1996), participants listened to a tape-recorded voice, after which they were asked either to verbally describe it or to not do so, and then asked to distinguish the voice from 3 similar distractor voices. The results showed that verbal overshadowing impaired accuracy of recognition based on gut feeling, suggesting an overall verbal overshadowing for voice recognition. Due to the forensic relevance of voices heard over the telephone and harassing phone calls that are often a problem for police, Perfect, Hunt, and Harris (2002) examined the influence of three factors on accuracy and confidence in voice recognition from a line-up. They expected to find an effect, because voice represents a class of stimuli that is difficult to describe verbally. This meets Schooler et al.'s (1997) modality mismatch criterion, meaning that describing the speakers age, gender, or accent is difficult, making voice recognition susceptible to the verbal overshadowing phenomenon. It was found that the method of memory encoding had no impact on performance, and that hearing a telephone voice reduced confidence but did not affect accuracy. They also found that providing a verbal description impaired accuracy but had no effect on confidence. The data showed an effect of verbal overshadowing in voice recognition and provided yet another disassociation between confidence and performance. Although there was a difference in confidence level, witnesses were able to identify voices over the telephone as accurately as voices heard direc

  Read more →
• 

  MinID

  MinID is an electronic login system used to secure a range of internet services in the Norwegian public sector. The communication done with MinID is encrypted to secure information from unauthorized usage. Everyone registered in the Norwegian Population Register over the age of 13 years can create a public ID with MinID. As of April 2010, more than 2 million people living in Norway had created user accounts with MinID. To create a public ID, PIN-codes from the Norwegian Tax Administration are needed. == Purpose == The purpose of MinID is to communicate an electronic identity, so that users are authorized to use electronic services, in a secure way. MinID has a user database where social security numbers and PIN-codes are saved. MinID can be used to access more than 50 online services from various Norwegian public agencies, including the Norwegian Labour and Welfare Administration, the Directorate of Taxes and the State Educational Loan. == Controller == The Norwegian Digitalisation Agency (Digdir) is the controller of the personal data handled by MinID. The Norwegian Digitalisation Agency (Norwegian: Digitaliseringsdirektoratet) or Digdir is a government agency subordinate to the Ministry of Digitalisation and Public Governance. It is responsible for help the public sector achieve quality, efficiency, user friendliness, openness and participation, as well as helping the public sector be organized and led in a good way with good intersectoral cooperation. == User profile == Users of MinID have a user profile that contains their mobile phone number and/or e-mail address. This data is used to administrate MinID use. The e-mail address is needed in order to send the user a temporary password if he or she forgets the password. The phone number is needed in order to send an SMS-code at log in or a temporary password if the user forgets the password. == Transparency, correction and deletion == According to the law users can claim full access of the handling of their own personal data. Users also have the right to information about how this data are handled and saved, and how they can correct or delete inaccurate data. Users can at any time choose to delete themselves as a user of MinID. The user profile will then be deleted from the MinID user database. == Extradition to others == MinID passes on the user's social security number and chosen language to the public services he or she logs on to, so that the user can go to other public services without a new login.

  Read more →
• 

  Confidential computing

  Confidential computing is a security and privacy-enhancing computational technique focused on protecting data in use. Confidential computing can be used in conjunction with storage and network encryption, which protect data at rest and data in transit respectively. It is designed to address software, protocol, cryptographic, and basic physical and supply-chain attacks, although some critics have demonstrated architectural and side-channel attacks effective against the technology. The technology protects data in use by performing computations in a hardware-based trusted execution environment (TEE). Confidential data is released to the TEE only once it is assessed to be trustworthy. Different types of confidential computing define the level of data isolation used, whether virtual machine, application, or function, and the technology can be deployed in on-premise data centers, edge locations, or the public cloud. It is often compared with other privacy-enhancing computational techniques such as fully homomorphic encryption, secure multi-party computation, and Trusted Computing. Confidential computing is promoted by the Confidential Computing Consortium (CCC) industry group, whose membership includes major providers of the technology. == Properties == Trusted execution environments (TEEs) "prevent unauthorized access or modification of applications and data while they are in use, thereby increasing the security level of organizations that manage sensitive and regulated data". Trusted execution environments can be instantiated on a computer's processing components such as a central processing unit (CPU) or a graphics processing unit (GPU). In their various implementations, TEEs can provide different levels of isolation including virtual machine, individual application, or compute functions. Typically, data in use in a computer's compute components and memory exists in a decrypted state and can be vulnerable to examination or tampering by unauthorized software or administrators. According to the CCC, confidential computing protects data in use through a minimum of three properties: Data confidentiality: "Unauthorized entities cannot view data while it is in use within the TEE". Data integrity: "Unauthorized entities cannot add, remove, or alter data while it is in use within the TEE". Code integrity: "Unauthorized entities cannot add, remove, or alter code executing in the TEE". In addition to trusted execution environments, remote cryptographic attestation is an essential part of confidential computing. The attestation process assesses the trustworthiness of a system and helps ensure that confidential data is released to a TEE only after it presents verifiable evidence that it is genuine and operating with an acceptable security posture. It allows the verifying party to assess the trustworthiness of a confidential computing environment through an "authentic, accurate, and timely report about the software and data state" of that environment. "Hardware-based attestation schemes rely on a trusted hardware component and associated firmware to execute attestation routines in a secure environment". Without attestation, a compromised system could deceive others into trusting it, claim it is running certain software in a TEE, and potentially compromise the confidentiality or integrity of the data being processed or the integrity of the trusted code. == Technical approaches == Technical approaches to confidential computing may vary in which software, infrastructure and administrator elements are allowed to access confidential data. The "trust boundary," which circumscribes a trusted computing base (TCB), defines which elements have the potential to access confidential data, whether they are acting benignly or maliciously. Confidential computing implementations enforce the defined trust boundary at a specific level of data isolation. The three main types of confidential computing are: Virtual machine isolation Application isolation, also known as process isolation Function isolation, also known as library isolation Virtual machine isolation removes the elements controlled by the computer infrastructure or cloud provider, but allows potential data access by elements inside a virtual machine running on the infrastructure. Application or process isolation permits data access only by authorized software applications or processes. Function or library isolation is designed to permit data access only by authorized subroutines or modules within a larger application, blocking access by any other system element, including unauthorized code in the larger application. == Threat model == As confidential computing is concerned with the protection of data in use, only certain threat models can be addressed by this technique. Other types of attacks are better addressed by other privacy-enhancing technologies. === In scope === The following threat vectors are generally considered in scope for confidential computing: Software attacks: including attacks on the host’s software and firmware. This may include the operating system, hypervisor, BIOS, other software and workloads. Protocol attacks: including "attacks on protocols associated with attestation as well as workload and data transport". This includes vulnerabilities in the "provisioning or placement of the workload" or data that could cause a compromise. Cryptographic attacks: including "vulnerabilities found in ciphers and algorithms due to a number of factors, including mathematical breakthroughs, availability of computing power and new computing approaches such as quantum computing". The CCC notes several caveats in this threat vector, including relative difficulty of upgrading cryptographic algorithms in hardware and recommendations that software and firmware be kept up-to-date. A multi-faceted, defense-in-depth strategy is recommended as a best practice. Basic physical attacks: including cold boot attacks, bus and cache snooping and plugging attack devices into an existing port, such as a PCI Express slot or USB port. Basic upstream supply-chain attacks: including attacks that would compromise TEEs through changes such as added debugging ports. The degree and mechanism of protection against these threats varies with specific confidential computing implementations. === Out of scope === Threats generally defined as out of scope for confidential computing include: Sophisticated physical attacks: including physical attacks that "require long-term and/or invasive access to hardware" such as chip scraping techniques and electron microscope probes. Upstream hardware supply-chain attacks: including attacks on the CPU manufacturing process, CPU supply chain in key injection/generation during manufacture. Attacks on components of a host system that are not directly providing the capabilities of the trusted execution environment are also generally out-of-scope. Availability attacks: confidential computing is designed to protect the confidentiality and integrity of protected data and code. It does not address availability attacks such as Denial of Service or Distributed Denial of Service attacks. == Use cases == Confidential computing can be deployed in the public cloud, on-premise data centers, or distributed "edge" locations, including network nodes, branch offices, industrial systems and others. === Data privacy and security === Confidential computing protects the confidentiality and integrity of data and code from the infrastructure provider, unauthorized or malicious software and system administrators, and other cloud tenants, which may be a concern for organizations seeking control over sensitive or regulated data. The additional security capabilities offered by confidential computing can help accelerate the transition of more sensitive workloads to the cloud or edge locations. === Multi-party analytics === Confidential computing can enable multiple parties to engage in joint analysis using confidential or regulated data inside a TEE while preserving privacy and regulatory compliance. In this case, all parties benefit from the shared analysis, but no party's sensitive data or confidential code is exposed to the other parties or system host. Examples include multiple healthcare organizations contributing data to medical research, or multiple banks collaborating to identify financial fraud or money laundering. Oxford University researchers proposed the alternative paradigm called "Confidential Remote Computing" (CRC), which supports confidential operations in Trusted Execution Environments across endpoint computers considering multiple stakeholders as mutually distrustful data, algorithm and hardware providers. === Confidential generative AI === Confidential computing technologies can be applied to various stages of a generative AI deployments to help increase data or model privacy, security, and regulatory compliance. TEEs and remote attestation can protect the integrity of data during AI model training, keep

  Read more →
• 

  Ray tracing (graphics)

  In 3D computer graphics, ray tracing is a technique for modeling light transport for use in a wide variety of rendering algorithms for generating digital images. On a spectrum of computational cost and visual fidelity, ray tracing-based rendering techniques, such as ray casting, recursive ray tracing, distribution ray tracing, photon mapping and path tracing, are generally slower and higher fidelity than scanline rendering methods. Thus, ray tracing was first deployed in applications where taking a relatively long time to render could be tolerated, such as still CGI images, and film and television visual effects (VFX), but was less suited to real-time applications such as video games, where speed is critical in rendering each frame. Since 2018, however, hardware acceleration for real-time ray tracing has become standard on new commercial graphics cards, and graphics APIs have followed suit, allowing developers to use hybrid ray tracing and rasterization-based rendering in games and other real-time applications with a lesser hit to frame render times. Ray tracing is capable of simulating a variety of optical effects, such as reflection, refraction, soft shadows, scattering, depth of field, motion blur, caustics, ambient occlusion and dispersion phenomena (such as chromatic aberration). It can also be used to trace the path of sound waves in a similar fashion to light waves, making it a viable option for more immersive sound design in video games by rendering realistic reverberation and echoes. In fact, any physical wave or particle phenomenon with approximately linear motion can be simulated with ray tracing. Ray tracing–based rendering techniques that sample light over a domain typically generate multiple rays and often rely on denoising to reduce the resulting noise. == History == The idea of ray tracing comes from as early as the 16th century, when it was described by Albrecht Dürer, who is credited for its invention. Dürer described multiple techniques for projecting 3-D scenes onto an image plane. Some of these project chosen geometry onto the image plane, as is done with rasterization today. Others determine what geometry is visible along a given ray, as is done with ray tracing. Using a computer for ray tracing to generate shaded pictures was first accomplished by Arthur Appel in 1968. Appel used ray tracing for primary visibility (determining the closest surface to the camera at each image point) by tracing a ray through each point to be shaded into the scene to identify the visible surface. The closest surface intersected by the ray was the visible one. This non-recursive ray tracing-based rendering algorithm is today called "ray casting". His algorithm then traced secondary rays to the light source from each point being shaded to determine whether the point was in shadow or not. Later, in 1971, Goldstein and Nagel of MAGI (Mathematical Applications Group, Inc.) published "3-D Visual Simulation", wherein ray tracing was used to make shaded pictures of solids. At the ray-surface intersection point found, they computed the surface normal and, knowing the position of the light source, computed the brightness of the pixel on the screen. Their publication describes a short (30-second) film "made using the University of Maryland's display hardware outfitted with a 16mm camera. The film showed the helicopter and a simple ground-level gun emplacement. The helicopter was programmed to undergo a series of maneuvers including turns, take-offs, and landings, etc., until it eventually is shot down and crashed." A CDC 6600 computer was used. MAGI produced an animation video called MAGI/SynthaVision Sampler in 1974. Another early instance of ray casting came in 1976, when Scott Roth created a flip book animation in Bob Sproull's computer graphics course at Caltech. The scanned pages are shown as a video in the accompanying image. Roth's computer program noted an edge point at a pixel location if the ray intersected a bounded plane different from that of its neighbors. Of course, a ray could intersect multiple planes in space, but only the surface point closest to the camera was noted as visible. The platform was a DEC PDP-10, a Tektronix storage-tube display, and a printer which would create an image of the display on rolling thermal paper. Roth extended the framework, introduced the term ray casting in the context of computer graphics and solid modeling, and in 1982 published his work while at GM Research Labs. Turner Whitted was the first to show recursive ray tracing for mirror reflection and for refraction through translucent objects, with an angle determined by the solid's index of refraction, and to use ray tracing for anti-aliasing. Whitted also showed ray traced shadows. He produced a recursive ray traced film called The Compleat Angler in 1979 while an engineer at Bell Labs. Whitted's deeply recursive ray tracing algorithm reframed rendering from being primarily a matter of surface visibility determination to being a matter of light transport. His paper inspired a series of subsequent work by others that included distribution ray tracing and finally unbiased path tracing, which provides the rendering equation framework that has allowed computer-generated imagery to be faithful to reality. For decades, global illumination in major films using computer-generated imagery was approximated with additional lights. Ray tracing-based rendering eventually changed that by enabling physically based light transport. Early feature films rendered entirely using path tracing include Monster House (2006), Cloudy with a Chance of Meatballs (2009), and Monsters University (2013). == Algorithm overview == Optical ray tracing describes a method for producing visual images constructed in 3D computer graphics environments, with more photorealism than either ray casting or scanline rendering techniques. It works by tracing a path from an imaginary eye through each pixel in a virtual screen, and calculating the color of the object visible through it. Scenes in ray tracing are described mathematically by a programmer or by a visual artist (normally using intermediary tools). Scenes may also incorporate data from images and models captured by means such as digital photography. Typically, each ray must be tested for intersection with some subset of all the objects in the scene. Once the nearest object has been identified, the algorithm will estimate the incoming light at the point of intersection, examine the material properties of the object, and combine this information to calculate the final color of the pixel. Certain illumination algorithms and reflective or translucent materials may require more rays to be re-cast into the scene. It may at first seem counterintuitive or "backward" to send rays away from the camera, rather than into it (as actual light does in reality), but doing so is many orders of magnitude more efficient. Since the overwhelming majority of light rays from a given light source do not make it directly into the viewer's eye, a "forward" simulation could potentially waste a tremendous amount of computation on light paths that are never recorded. Therefore, the shortcut taken in ray tracing is to presuppose that a given ray intersects the view frame. After either a maximum number of reflections or a ray traveling a certain distance without intersection, the ray ceases to travel and the pixel's value is updated. === Calculate rays for rectangular viewport === On input we have (in calculation we use vector normalization and cross product): E ∈ R 3 {\displaystyle E\in \mathbb {R^{3}} } eye position T ∈ R 3 {\displaystyle T\in \mathbb {R^{3}} } target position θ ∈ [ 0 , π ] {\displaystyle \theta \in [0,\pi ]} field of view - for humans, we can assume ≈ π / 2 rad = 90 ∘ {\displaystyle \approx \pi /2{\text{ rad}}=90^{\circ }} m , k ∈ N {\displaystyle m,k\in \mathbb {N} } numbers of square pixels on viewport vertical and horizontal direction i , j ∈ N , 1 ≤ i ≤ k ∧ 1 ≤ j ≤ m {\displaystyle i,j\in \mathbb {N} ,1\leq i\leq k\land 1\leq j\leq m} numbers of actual pixel v → ∈ R 3 {\displaystyle {\vec {v}}\in \mathbb {R^{3}} } vertical vector which indicates where is up and down, usually v → = [ 0 , 1 , 0 ] {\displaystyle {\vec {v}}=[0,1,0]} - roll component which determine viewport rotation around point C (where the axis of rotation is the ET section) The idea is to find the position of each viewport pixel center P i j {\displaystyle P_{ij}} which allows us to find the line going from eye E {\displaystyle E} through that pixel and finally get the ray described by point E {\displaystyle E} and vector R → i j = P i j − E {\displaystyle {\vec {R}}_{ij}=P_{ij}-E} (or its normalization r → i j {\displaystyle {\vec {r}}_{ij}} ). First we need to find the coordinates of the bottom left viewport pixel P 1 m {\displaystyle P_{1m}} and find the next pixel by making a shift along directions parallel to viewport (vectors b → n {\displaystyle {\vec {b}}_{n

  Read more →
• 

  Depth peeling

  In computer graphics, depth peeling is an exact multipass method of order-independent transparency that extracts transparent fragments into depth layers and composites those layers in depth order. Depth peeling has the advantage of being able to generate correct results even for complex images containing intersecting transparent objects. == Method == Depth peeling works by rendering the image multiple times. Depth peeling uses two Z buffers, one that works conventionally, and one that is not modified, and sets the minimum distance at which a fragment can be drawn without being discarded. For each pass, the previous pass' conventional Z-buffer is used as the minimal Z-buffer, so each pass removes already-captured nearer fragments and draws the next depth layer behind them. The resulting images can then be composited in depth order to form a single image. A major drawback of classical depth peeling is performance: it requires one geometry pass per peeled layer, so scenes with high depth complexity require many passes that each re-rasterize the transparent geometry. Later variants reduce the number of passes by peeling multiple layers or both front and back layers in a pass. Dual depth peeling reduces the geometry-pass count from N to N/2+1 by peeling one layer from the front and one from the back in each pass, while multi-layer depth peeling peels several layers per pass and reported up to an 8x speed-up in RGBA8 settings.

  Read more →
• 

  Mozilla VPN

  Mozilla VPN is an open-source virtual private network developed by Mozilla. It launched in beta as Firefox Private Network on September 10, 2019, and officially launched on July 15, 2020, as Mozilla VPN. Mozilla VPN should not be confused with the built-in VPN in Firefox since version 149 released in March 2026, which is free with a monthly data limit of 50 GB but only masks traffic that originates in Firefox unlike Mozilla VPN that protects the entire device. == History == The Firefox Private Network web browser extension beta version was released on September 10, 2019, as part of the relaunch of Mozilla's Test Pilot Program, a program that allowed Firefox users to test experimental new features which had been shuttered in January 2019. The beta of the subscription-based standalone virtual private network for Android, Microsoft Windows, and Chromebook launched on February 19, 2020, with the iOS version following soon after. Firefox Private Network was rebranded as "Mozilla VPN" on June 18, 2020, and officially launched as Mozilla VPN on July 15, 2020. At launch, Mozilla VPN was available in six countries (the United States, Canada, the United Kingdom, Singapore, Malaysia, and New Zealand) for Windows 10, Android, and iOS (beta). Over time, the service also launched in Germany, France, Italy, Spain, Switzerland, Austria, Belgium, Netherlands, Ireland, Finland, Sweden, Poland, Czechia, Hungary, Romania, Bulgaria, Slovakia, Portugal, Denmark, Croatia, Lithuania, Slovenia, Latvia, Luxembourg, Estonia, Cyprus, and Malta. == Audits history == Cybersecurity firm Cure53 conducted a security audit for Mozilla VPN in August 2020 and identified multiple vulnerabilities, including one critical-severity vulnerability. In March 2021, Cure53 conducted a second security audit, which noted significant improvements since the 2020 audit. The second audit identified multiple issues, including two medium-severity and one high-severity vulnerability, but concluded that by the time of publication, only one vulnerability remained unresolved, and that it would require "a strong state-funded attacker-model" to be exploitable. Mozilla disclosed most of the vulnerabilities in July 2021 and released the full report by Cure53 in August 2021. In April 2023, Cure53 conducted a third security audit, the results of which Mozilla disclosed in December that year, along with the full report by Cure53. == Features == Mozilla VPN masks the user's IP address, hiding the user's location data from the websites accessed by the user, and encrypts all network activity. The service allows for up to 5 simultaneous connections, to any of more than 500 servers in 30+ countries, and is available on the mobile operating systems iOS and Android and the desktop operating systems Microsoft Windows, macOS and Linux. Mozilla VPN's infrastructure is provided by the Swedish Mullvad VPN service, which uses the WireGuard VPN protocol. The VPN software comes with additional features, like recommended server locations, the ability to block ads, block ad trackers and malware, the ability to exclude certain applications from protection, the ability to set multi-hop connections, and to set custom DNS servers. When used with Firefox and the official extension, Mozilla VPN allows the use of different settings per container as well as bypassing the VPN for specific websites.

  Read more →
• 

  Vinted

  Vinted Group UAB is a Lithuanian technology company best known for its online marketplace Vinted. Vinted is the leading second-hand fashion marketplace in Europe and a go-to destination for all kinds of second-hand items. According to the company, its mission is to make second-hand the first choice worldwide. The company operates as an ecosystem of businesses, including the Vinted Marketplace (its peer-to-peer resale platform), Vinted Go (logistics and shipping services), Vinted Pay (in-app payment solutions), and Vinted Ventures (an investment arm supporting the circular economy). Headquartered in Vilnius, Lithuania, it also has offices in Germany and the Netherlands and employs more than 2,200 people. == History == Vinted was co-founded in 2008 by Milda Mitkute and Justas Janauskas in Vilnius, Lithuania. The idea originated when Mitkute was moving house and wanted a way to sell clothes she no longer needed. Janauskas helped her create a website where users could trade clothing items. In 2016, Dutch entrepreneur Thomas Plantenga joined Vinted as a strategy consultant and later became Chief Executive Officer, leading the company through a period of international growth. In 2019, Vinted became Lithuania’s first technology unicorn after raising €128 million at a €1 billion valuation in a funding round led by Lightspeed Venture Partners. In October 2020, it acquired United Wardrobe, a Dutch competitor, and in November 2020 German Kleiderkreisel and Mamikreisel were officially merged into the Vinted platform. In 2024 it acquired Trendsales, a Danish resale platform. According to Vogue Business, Vinted’s revenue grew 61% between 2022 and 2023 and the company posted a net profit of €17.8 million in 2023. Usage of Vinted in the UK has grown from 1.2 million users in 2021, to 8 million in 2023. In 2024, the group reported consolidated revenue of €813.4 million (up 36% from 2023) and a net profit of €76.7 million, up 330% from 2023. As of 2024, Vinted was valued at approximately €5 billion, operating in more than 26 markets worldwide and announcing plans to launch in Ireland, Greece, Latvia, Slovenia, and Estonia in 2025. As of 2025 the company employed more than 2,200 people. In April 2026, Vinted completed a secondary share transaction of €880m, valuing the company at €8bn. == Products and operations == Vinted primarily resells clothing but now supports multiple categories including homeware, kidswear, electronics, books, collectibles, and high-value fashion. Vinted has worked with public figures such as Paul Mescal and Alexa Chung on exclusive wardrobe sales and has also partnered directly with charities including Oxfam on initiatives which promote the social and environmental value of second-hand fashion, such as the Style for Change fashion show at London Fashion Week. In 2025, Vinted produced its first television format, the second-hand fashion competition series RE/Style, hosted by Emma Willis. The show features emerging fashion designers from across Europe creating runway-ready looks from second-hand garments and aired on Prime Video UK. In 2025, Vinted was reported as France’s top clothing retailer by sales volume. == Criticism == Vinted has faced scrutiny from European data protection authorities in France, Lithuania, and Poland following complaints regarding GDPR compliance and account blocking practices. In July 2024, the Lithuanian authority fined the company €2,375,276. The case was coordinated by a dedicated Vinted Working Group under the European Data Protection Board. In early 2024, Swedish police reported around 300 fraud cases linked to the platform, in which users’ bank accounts were targeted by scammers. In October 2024, Channel 4 in the United Kingdom aired a documentary examining safety and privacy concerns related to the platform, including the sexualisation of underage users’ images and risks associated with second-hand baby products lacking safety certification. In November 2025, BBC News reported that Vinted’s update to its sizing system in the United Kingdom led to widespread user criticism. Vinted said the update was intended to standardise sizing across international brands.

  Read more →
• 

  Ibotta

  Ibotta, Inc. is an American mobile technology company headquartered in Denver, Colorado. Founded in 2011, the company offers cash back rewards on various purchases through its Ibotta Performance Network and direct to consumer app. Ibotta partners with CPG (consumer packaged goods) brands and network publishers to provide these rewards. As of 2024, the company operates solely in the United States. The company's rewards-as-a-service offering, the Ibotta Performance Network, went live in 2022. In August 2019, Ibotta received a $1 billion valuation after its Series D funding, and in 2023, the company surpassed $1.5 billion cash rewards paid to over 50 million consumers since the company's founding. Ibotta became a publicly traded company in April 2024 with a listing on the New York Stock Exchange. As of September 2025, Ibotta is trading at approximately $27.13 per share, marking a 69% decline from its initial public offering price of $88 per share on April 18, 2024. == History == === Founding through early 2019 === Ibotta was founded by current CEO Bryan Leach. The company was incorporated in 2011 and the app launched to both the App Store and Google Play stores in 2012. Early investors included entrepreneur and computer scientist Jim Clark and Tom “TJ” Jermoluk, Chairman of @Home Network. In 2015, Ibotta expanded beyond item level grocery, adding the ability to get cash back on in-store retail purchases. In 2016, in-app mobile commerce began, allowing users to navigate from the Ibotta app to its partners' apps to earn cash back on purchases. In 2016 with a Series C investment, Ibotta had raised over $73 million in funding. In March of that year, Ibotta partnered with Anheuser-Busch to offer cash back for adults who purchased its products. In May, the company partnered with LiveRamp so that companies could use their CRM data to create segmented, personalized campaigns. At the time, the company had around 200 full- and part-time employees and moved from offices in Lower Downtown Denver (LoDo) to a 40,000-square-foot office in the central Denver business district. A year later, the company had to expand to a second floor as it added almost another 100 employees. In 2017, Ibotta added cash back for Uber to its app as well as cash back rewards for online and mobile purchases. In 2018, Ibotta was listed on the Inc. 5,000 list as one of the fastest growing private companies in the U.S. A year later, in January 2019, the Ibotta app had been downloaded more than 30 million times with users receiving a reported $500 million in cash back rewards. That year, Ibotta was the largest mobile company in Colorado with six million monthly active users. === August 2019 to present === In August 2019, Ibotta was valued at $1 billion, following a Series D round of funding. The round was led by Koch Disruptive Technologies, a subsidiary of Koch Industries. 2019 was also the year the company introduced Pay with Ibotta, which allowed users to complete purchases at key retailers on the Ibotta app and earn instant cash back in the process. With that new service, users were able to enter their purchase total and use a QR code to checkout and receive immediate cash back. In 2020, the company partnered with Trees for the Future to plant up to 1 million trees as part of an Earth Month campaign to raise awareness about the waste of unused paper coupons. In response to the COVID-19 pandemic, Ibotta partnered with CPG brands in their “Here to Help” campaign and together committed over $10 million in cash back to American consumers. The company added the ability to earn cash back from online grocery pick-up and delivery orders. Later that year, Ibotta started its free Thanksgiving program, providing users with 100% cash back on select groceries needed for a Thanksgiving meal. By 2022, the company had provided approximately 10 million Thanksgiving meals. In 2021, Ibotta acquired the company OctoShop (originally InStok), a shopping browser extension company. The OctoShop app enables users to compare prices across stores and set restock and price-drop alerts. In April 2022, the Ibotta Performance Network (IPN) was launched. The IPN allows brands to deliver digital offers to consumers through third party publishers. Retailers including Walmart, Dollar General and Family Dollar, food delivery services including Instacart, and convenience stores including Shell are all part of the Ibotta Performance Network. This pay-per-sales or success-based performance network reaches over 200 million consumers. On April 18, 2024, Ibotta had its initial public offering (IPO), trading on the New York Stock Exchange (NYSE) under the ticker symbol IBTA. It was the largest technology IPO in Colorado history. In October 2025, Ibotta announced a partnership with technology and analytics company Circana, integrating Circana's Household Lift measurement into Ibotta campaigns to give CPG brands an increased understanding of the impact of their promotional campaigns. On November 3, 2025, Ibotta launched LiveLift, a tool for companies to measure the return on investment of digital promotions, in order to optimize performance marketing goals. === Athletic partnerships === Ibotta became the official jersey patch partner of the New Orleans Pelicans, a professional men's basketball team in the National Basketball Association (NBA), for the 2020–2021 and 2023–2024 seasons. Ibotta became the official jersey patch partner of the 2023 NBA champion Denver Nuggets baskeetball team beginning in the 2023–2024 season. In March 2023, F1 driver Logan Sargeant, the first U.S. racer to compete in F1 since 2015, partnered with Ibotta. The Ibotta logo was displayed on Sargeant's racing helmet throughout his F1 career. In June 2023, UConn Huskies women's basketball player Paige Bueckers entered into a "name, image, and likeness" (NIL) promotional agreement with Ibotta. According to a press release by Ibotta, the company has agreements with The Brandr Group, which finds NIL opportunities for women college athletes, and the Pearpop social media marketing platform to promote Ibotta. == Legal issues == In April 2025, shareholders filed a class action lawsuit—Fortune v. Ibotta, Inc., in the U.S. District Court for the District of Colorado (Case No. 25-cv-01213)—alleging that the registration statement in connection with Ibotta’s April 2024 initial public offering omitted material information. The complaint claims that, although Ibotta disclosed detailed terms for its contract with Walmart Inc., it failed to warn investors that its agreement with The Kroger Co., its second-largest client, was terminable at will and thus could be canceled without warning, creating a misleading impression of stability.

  Read more →
• 

  Comparison of color models in computer graphics

  This article provides introductory information about the RGB, HSV, and HSL color models from a computer graphics (web pages, images) perspective. An introduction to colors is also provided to support the main discussion. == Basics of color == === Primary colors and hue === First, "color" refers to the human brain's subjective interpretation of combinations of a narrow band of wavelengths of light. For this reason, the definition of "color" is not based on a strict set of physical phenomena. Therefore, even basic concepts like "primary colors" are not clearly defined. For example, traditional "Painter's Colors" use red, blue, and yellow as the primary colors, "Printer's Colors" use cyan, yellow, and magenta, and "Light Colors" use red, green, and blue. "Light colors", more formally known as additive colors, are formed by combining red, green, and blue light. This article refers to additive colors and refers to red, green, and blue as the primary colors. Hue is a term describing a pure color, that is, a color not modified by tinting or shading (see below). In additive colors, hues are formed by combining two primary colors. When two primary colors are combined in equal intensities, the result is a "secondary color". === Color wheel === A color wheel is a tool that provides a visual representation of the relationships between all possible hues. The primary colors are arranged around a circle at equal (120 degree) intervals. (Warning: Color wheels frequently depict "Painter's Colors" primary colors, which leads to a different set of hues than additive colors.) The illustration shows a simple color wheel based on the additive colors. Note that the position (top, right) of the starting color, typically red, is arbitrary, as is the order of green and blue (clockwise, counter-clockwise). The illustration also shows the secondary colors, yellow, cyan, and magenta, located halfway between (60 degrees) the primary colors. == Complementary color == The complement of a hue is the hue that is opposite it (180 degrees) on the color wheel. Using additive colors, mixing a hue and its complement in equal amounts produces white. === Tints and shades === The following discussion uses an illustration involving three projectors pointing to the same spot on a screen. Each projector is capable of generating one hue. The "intensities" of each projector are "matched" and can be equally adjusted from zero to full. (Note: "Intensity" is used here in the same sense as the RGB color model. The subject of matching, or "gamma correction", is beyond the level of this article.) A shade is produced by "dimming" a maximum chroma color. Painters refer to this as "adding black". In our illustration, one projector is set to full intensity, a second is set to some intensity between zero and full, and third is set to zero. "Dimming" is accomplished by decreasing each projector's intensity setting to the same fraction of its start setting. In the shade example, with any fully shaded hue, that all three projectors are set to zero intensity, resulting in black. A tint is produced by "lightening" a maximum chroma color. Painters refer to this as "adding white". In our illustration, one projector is set to full intensity, a second is set to some intensity between zero and full, and third is set to zero. "Lightening" is accomplished by increasing each projector's intensity setting by the same fraction from its start setting to full. In the tinting example, note that the third projector is now contributing. When the hue is fully lightened, all three projectors are each at full intensity, and the result is white. Note an attribute of the total intensity in the additive model. If full intensity for one projector is 1, then a primary color has a combined intensity of 1. A secondary color has a total intensity of 2. White has a total intensity of 3. Tinting, or "adding white", increases the total intensity of the hue. While this is simply a fact, the HSL model will take this fact into account in its design. === Tones === Tone is a general term, typically used by painters, to refer to the effects of reducing the "colorfulness" of a maximum chroma color; painters refer to it as "adding gray". Note that gray is not a color or even a single concept but refers to all the range of values between black and white where all three primary colors are equally represented. The general term is provided as more specific terms have conflicting definitions in different color models. Thus, shading takes a hue toward black, tinting takes a hue towards white, and tones cover the range between. == Choosing a color model == No one color model is necessarily "better" than another. Typically, the choice of a color model is dictated by external factors, such as a graphics tool or the need to specify colors according to the CSS2 or CSS3 standard. The following discussion only describes how the models function, centered on the concepts of hue, shade, tint, and tone. === RGB === The RGB model's approach to colors is important because: It directly reflects the physical properties of "Truecolor" displays As of 2011, most graphic cards define pixel values in terms of the colors red, green, and blue. The typical range of intensity values for each color, 0–255, is based on taking a binary number with 32 bits and breaking it up into four bytes of 8 bits each. 8 bits can hold a value from 0 to 255. The fourth byte is used to specify the "alpha", or the opacity, of the color. Opacity comes into play when layers with different colors are stacked. If the color in the top layer is less than fully opaque (alpha < 255), the color from underlying layers "shows through". In the RGB model, hues are represented by specifying one color as full intensity (255), a second color with a variable intensity, and the third color with no intensity (0). The following provides some examples using red as the full-intensity and green as the partial-intensity colors; blue is always zero: Shades are created by multiplying the intensity of each primary color by 1 minus the shade factor, in the range 0 to 1. A shade factor of 0 does nothing to the hue, a shade factor of 1 produces black: new intensity = current intensity (1 – shade factor) The following provides examples using orange: Tints are created by modifying each primary color as follows: the intensity is increased so that the difference between the intensity and full intensity (255) is decreased by the tint factor, in the range 0 to 1. A tint factor of 0 does nothing, a tint factor of 1 produces white: new intensity = current intensity + (255 – current intensity) tint factor The following provides examples using orange: Tones are created by applying both a shade and a tint. The order in which the two operations are performed does not matter, with the following restriction: when a tint operation is performed on a shade, the intensity of the dominant color becomes the "full intensity"; that is, the intensity value of the dominant color must be used in place of 255. The following provides examples using orange: === HSV === The HSV, or HSB, model describes colors in terms of hue, saturation, and value (brightness). Note that the range of values for each attribute is arbitrarily defined by various tools or standards. Be sure to determine the value ranges before attempting to interpret a value. Hue corresponds directly to the concept of hue in the Color Basics section. The advantages of using hue are The angular relationship between tones around the color circle is easily identified Shades, tints, and tones can be generated easily without affecting the hue Saturation corresponds directly to the concept of tint in the Color Basics section, except that full saturation produces no tint, while zero saturation produces white, a shade of gray, or black. Value corresponds directly to the concept of intensity in the Color Basics section. Pure colors are produced by specifying a hue with full saturation and value Shades are produced by specifying a hue with full saturation and less than full value Tints are produced by specifying a hue with less than full saturation and full value Tones are produced by specifying a hue and both less than full saturation and value White is produced by specifying zero saturation and full value, regardless of hue Black is produced by specifying zero value, regardless of hue or saturation Shades of gray are produced by specifying zero saturation and between zero and full value The advantage of HSV is that each of its attributes corresponds directly to the basic color concepts, which makes it conceptually simple. The perceived disadvantage of HSV is that the saturation attribute corresponds to tinting, so desaturated colors have increasing total intensity. For this reason, the CSS3 standard plans to support RGB and HSL but not HSV. === HSL === The HSL model describes colors in terms of hue, saturation, and lightness (also called luminance). (Note: the definition of sa

  Read more →
• 

  Metadata repository

  A metadata repository is a database created to store metadata. Metadata is information about the structures that contain the actual data. Metadata is often said to be "data about data", but this is misleading. Data profiles are an example of actual "data about data". Metadata adds one layer of abstraction to this definition– it is data about the structures that contain data. Metadata may describe the structure of any data, of any subject, stored in any format. A well-designed metadata repository typically contains data far beyond simple definitions of the various data structures. Typical repositories store dozens to hundreds of separate pieces of information about each data structure. Comparing the metadata of a couple data items - one digital and one physical - clarify what metadata is: First, digital: For data stored in a database one may have a table called "Patient" with many columns, each containing data which describes a different attribute of each patient. One of these columns may be named "Patient_Last_Name". What is some of the metadata about the column that contains the actual surnames of patients in the database? We have already used two items: the name of the column that contains the data (Patient_Last_Name) and the name of the table that contains the column (Patient). Other metadata might include the maximum length of last name that may be entered, whether or not last name is required (can we have a patient without Patient_Last_Name?), and whether the database converts any surnames entered in lower case to upper case. Metadata of a security nature may show the restrictions which limit who may view these names. Second, physical: For data stored in a brick and mortar library, one have many volumes and may have various media, including books. Metadata about books would include ISBN, Binding_Type, Page_Count, Author, etc. Within Binding_Type, metadata would include possible bindings, material, etc. This contextual information of business data include meaning and content, policies that govern, technical attributes, specifications that transform, and programs that manipulate. == Definition == The metadata repository is responsible for physically storing and cataloging metadata. Data in a metadata repository should be generic, integrated, current, and historical: Generic Meta model should store the metadata by generic terms instead of storing it by an applications-specific defined way, so that if your data base standard changes from one product to another the physical meta model of the metadata repository would not need to change. Integration of the metadata repository allows all business areas' metadata to be in an integrated fashion: Covering all domains and subject areas of the organization. current and historical The metadata repository should have accessible current and historical metadata. Metadata repositories used to be referred to as a data dictionary. With the transition of needs for the metadata usage for business intelligence has increased so is the scope of the metadata repository increased. Earlier data dictionaries are the closest place to interact technology with business. Data dictionaries are the universe of metadata repository in the initial stages but as the scope increased Business glossary and their tags to variety of status flags emerged in the business side while consumption of the technology metadata, their lineage and linkages made the repository, the source for valuable reports to bring business and technology together and helped data management decisions easier as well as assess the cost of the changes. Metadata repository explores the enterprise wide data governance, data quality and master data management (includes master data and reference data) and integrates this wealth of information with integrated metadata across the organization to provide decision support system for data structures, even though it only reflects the structures consumed from various systems. == Repository vs. registry == Repository has additional functionalities compared with registry. Metadata repository not only stores metadata like Metadata registry but also adds relationships with related metadata types. Metadata when related in a flow from its point of entry into organization up to the deliverables is considered as the lineage of that data point. Metadata when related across other related metadata types is called linkages. By providing the relationships to all the metadata points across the organization and maintaining its integrity with an architecture to handle the changes, metadata repository provides the basic material for understanding the complete data flow and their definitions and their impact. Also the important feature is to maintain the version control though this statement for contrasting is open for discussion. These definitions are still evolving, so the accuracy of the definitions needs refinement. The purpose of registry is to define the metadata element and maintained across the organization. And data models and other data management teams refer to the registry for any changes to follow. While Metadata repository sources metadata from various metadata systems in the organizations and reflects what is in the upstream. Repository never acts as an upstream while registry is used as an upstream for metadata changes. == Reason for use == Metadata repository enables all the structure of the organizations data containers to one integrated place. This opens plethora of resourceful information for making calculated business decisions. This tool uses one generic form of data model to integrate all the models thus brings all the applications and programs of the organization into one format. And on top of it applying the business definitions and business processes brings the business and technology closer that will help organizations make reliable roadmaps with definite goals. With one stop information, business will have more control on the changes, and can do impact analysis of the tool. Usually business spends much time and money to make decisions based on discovery and research on impacts to make changes or to add new data structures or remove structures in data management of the organization. With a structured and well maintained repository, moving the product from ideation to delivery takes the least amount of time (considering other variables are constant). To sum it up: Integration of the metadata across the organization Build relationship between various metadata types Build relationship between various disparate systems Define business golden copy of definitions Version control of the changes at structure level Interaction with Reference data Link view to master data Automatic synchronization with various authorized metadata source systems More control to business decisions Validate the structures by overlapping the models Discovering discrepancies, gaps, lineage, metrics at data structure level Each database management system (DBMS) and database tools have their own language for the metadata components within. Database applications already have their own repositories or registries that are expected to provide all of the necessary functionality to access the data stored within. Vendors do not want other companies to be capable of easily migrating data away from their products and into competitors products, so they are proprietary with the way they handle metadata. CASE tools, DBMS dictionaries, ETL tools, data cleansing tools, OLAP tools, and data mining tools all handle and store metadata differently. Only a metadata repository can be designed to store the metadata components from all of these tools. == Design == Metadata repositories should store metadata in four classifications: ownership, descriptive characteristics, rules and policies, and physical characteristics. Ownership, showing the data owner and the application owner. The descriptive characteristics, define the names, types and lengths, and definitions describing business data or business processes. Rules and policies, will define security, data cleanliness, timelines for data, and relationships. Physical characteristics define the origin or source, and physical location. Like building a logical data model for creating a database, a logical meta model can help identify the metadata requirements for business data. The metadata repository will be centralized, decentralized, or distributed. A centralized design means that there is one database for the metadata repository that stores metadata for all applications business wide. A centralized metadata repository has the same advantages and disadvantages of a centralized database. Easier to manage because all the data is in one database, but the disadvantage is that bottlenecks may occur. A decentralized metadata repository stores metadata in multiple databases, either separated by location and or departments of the business. This makes management of the repository more involved than a centraliz

  Read more →
• 

  Lossless join decomposition

  In database design, a lossless join decomposition is a decomposition of a relation r {\displaystyle r} into relations r 1 , r 2 {\displaystyle r_{1},r_{2}} such that a natural join of the two smaller relations yields back the original relation. This is central in removing redundancy safely from databases while preserving the original data. Lossless join can also be called non-additive. == Definition == A relation r {\displaystyle r} on schema R {\displaystyle R} decomposes losslessly onto schemas R 1 {\displaystyle R_{1}} and R 2 {\displaystyle R_{2}} if π R 1 ( r ) ⋈ π R 2 ( r ) = r {\displaystyle \pi _{R_{1}}(r)\bowtie \pi _{R_{2}}(r)=r} , that is r {\displaystyle r} is the natural join of its projections onto the smaller schemas. A pair ( R 1 , R 2 ) {\displaystyle (R_{1},R_{2})} is a lossless-join decomposition of R {\displaystyle R} or said to have a lossless join with respect to a set of functional dependencies F {\displaystyle F} if any relation r ( R ) {\displaystyle r(R)} that satisfies F {\displaystyle F} decomposes losslessly onto R 1 {\displaystyle R_{1}} and R 2 {\displaystyle R_{2}} . Decompositions into more than two schemas can be defined in the same way. == Criteria == A decomposition R = R 1 ∪ R 2 {\displaystyle R=R_{1}\cup R_{2}} has a lossless join with respect to F {\displaystyle F} if and only if the closure of R 1 ∩ R 2 {\displaystyle R_{1}\cap R_{2}} includes R 1 ∖ R 2 {\displaystyle R_{1}\setminus R_{2}} or R 2 ∖ R 1 {\displaystyle R_{2}\setminus R_{1}} . In other words, one of the following must hold: ( R 1 ∩ R 2 ) → ( R 1 ∖ R 2 ) ∈ F + {\displaystyle (R_{1}\cap R_{2})\to (R_{1}\setminus R_{2})\in F^{+}} ( R 1 ∩ R 2 ) → ( R 2 ∖ R 1 ) ∈ F + {\displaystyle (R_{1}\cap R_{2})\to (R_{2}\setminus R_{1})\in F^{+}} === Criteria for multiple sub-schemas === Multiple sub-schemas R 1 , R 2 , . . . , R n {\displaystyle R_{1},R_{2},...,R_{n}} have a lossless join if there is some way in which we can repeatedly perform lossless joins until all the schemas have been joined into a single schema. Once we have a new sub-schema made from a lossless join, we are not allowed to use any of its isolated sub-schema to join with any of the other schemas. For example, if we can do a lossless join on a pair of schemas R i , R j {\displaystyle R_{i},R_{j}} to form a new schema R i , j {\displaystyle R_{i,j}} , we use this new schema (rather than R i {\displaystyle R_{i}} or R j {\displaystyle R_{j}} ) to form a lossless join with another schema R k {\displaystyle R_{k}} (which may already be joined (e.g., R k , l {\displaystyle R_{k,l}} )). == Example == Let R = { A , B , C , D } {\displaystyle R=\{A,B,C,D\}} be the relation schema, with attributes A, B, C and D. Let F = { A → B C } {\displaystyle F=\{A\rightarrow BC\}} be the set of functional dependencies. Decomposition into R 1 = { A , B , C } {\displaystyle R_{1}=\{A,B,C\}} and R 2 = { A , D } {\displaystyle R_{2}=\{A,D\}} is lossless under F because R 1 ∩ R 2 = A {\displaystyle R_{1}\cap R_{2}=A} and we have a functional dependency A → B C {\displaystyle A\rightarrow BC} . In other words, we have proven that ( R 1 ∩ R 2 → R 1 ∖ R 2 ) ∈ F + {\displaystyle (R_{1}\cap R_{2}\rightarrow R_{1}\setminus R_{2})\in F^{+}} .

  Read more →
• 

  Morphing

  Morphing is a special effect in motion pictures and animations that changes (or morphs) one image or shape into another through a seamless transition. Traditionally such a depiction would be achieved through dissolving techniques on film. Since the early 1990s, this has been replaced by computer software to create more realistic transitions. A similar method is applied to audio recordings, for example, by changing voices or vocal lines. == Early transformation techniques == Long before digital morphing, several techniques were used for similar image transformations. Some of those techniques are closer to a matched dissolve – a gradual change between two pictures without warping the shapes in the images – while others did change the shapes in between the start and end phases of the transformation. === Tabula scalata === Known since at least the end of the 16th century, Tabula scalata is a type of painting with two images divided over a corrugated surface. Each image is only correctly visible from a certain angle. If the pictures are matched properly, a primitive type of morphing effect occurs when changing from one viewing angle to the other. === Mechanical transformations === Around 1790 French shadow play showman François Dominique Séraphin used a metal shadow figure with jointed parts to have the face of a young woman changing into that of a witch. Some 19th century mechanical magic lantern slides produced changes to the appearance of figures. For instance a nose could grow to enormous size, simply by slowly sliding away a piece of glass with black paint that masked part of another glass plate with the picture. === Matched dissolves === In the first half of the 19th century "dissolving views" were a popular type of magic lantern show, mostly showing landscapes gradually dissolving from a day to night version or from summer to winter. Other uses are known, for instance Henry Langdon Childe showed groves transforming into cathedrals. The 1910 short film Narren-grappen shows a dissolve transformation of the clothing of a female character. Maurice Tourneur's 1915 film Alias Jimmy Valentine featured a subtle dissolve transformation of the main character from respected citizen Lee Randall into his criminal alter ego Jimmy Valentine. The Peter Tchaikovsky Story in a 1959 TV-series episode of Disneyland features a swan automaton transforming into a real ballet dancer. In 1985, Godley & Creme created a "morph" effect using analogue cross-fades on parts of different faces in the video for "Cry". === Animation === In animation, the morphing effect was created long before the introduction of cinema. A phenakistiscope designed by its inventor Joseph Plateau was printed around 1835 and shows the head of a woman changing into a witch and then into a monster. Émile Cohl's 1908 animated film Fantasmagorie featured much morphing of characters and objects drawn in simple outlines. == Digital morphing == In the early 1990s, computer techniques capable of more convincing results saw increasing use. These involved distorting one image at the same time that it faded into another through marking corresponding points and vectors on the "before" and "after" images used in the morph. For example, one would morph one face into another by marking key points on the first face, such as the contour of the nose or location of an eye, and mark where these same points existed on the second face. The computer would then distort the first face to have the shape of the second face at the same time that it faded the two faces. To compute the transformation of image coordinates required for the distortion, the algorithm of Beier and Neely can be used. === Concerns === In 1993 concerns were raised about the authenticity of digitally altered images arising from morphing. Images of fake "tween" people found half way between two morphed people created a skeptical media long before AI. === Early examples === In or before 1986, computer graphics company Omnibus created a digital animation for a Tide commercial with a Tide detergent bottle smoothly morphing into the shape of the United States. The effect was programmed by Bob Hoffman. Omnibus re-used the technique in the movie Flight of the Navigator (1986). It featured scenes with a computer generated spaceship that appeared to change shape. The plaster cast of a model of the spaceship was scanned and digitally modified with techniques that included a reflection mapping technique that was also developed by programmer Bob Hoffman. The 1986 movie The Golden Child implemented early digital morphing effects from animal to human and back. Willow (1988) featured a more detailed digital morphing sequence with a person changing into different animals. A similar process was used a year later in Indiana Jones and the Last Crusade to create Walter Donovan's gruesome demise. Both effects were created by Industrial Light & Magic, using software developed by Tom Brigham and Doug Smythe (AMPAS). In 1991, morphing appeared notably in the Michael Jackson music video "Black or White" and in the movies Terminator 2: Judgment Day and Star Trek VI: The Undiscovered Country. The first application for personal computers to offer morphing was Gryphon Software Morph on the Macintosh. Other early morphing systems included ImageMaster, MorphPlus and CineMorph, all of which premiered for the Amiga in 1992. Other programs became widely available within a year, and for a time the effect became common to the point of cliché. For high-end use, Elastic Reality (based on MorphPlus) saw its first feature film use in In The Line of Fire (1993) and was used in Quantum Leap (work performed by the Post Group). At VisionArt Ted Fay used Elastic Reality to morph Odo for Star Trek: Deep Space Nine. The Snoop Dogg music video "Who Am I? (What's My Name?)", where Snoop Dogg and the others morph into dogs. Elastic Reality was later purchased by Avid, having already become the de facto system of choice, used in many hundreds of films. The technology behind Elastic Reality earned two Academy Awards in 1996 for Scientific and Technical Achievement going to Garth Dickie and Perry Kivolowitz. The effect is technically called a "spatially warped cross-dissolve". The first social network designed for user-generated morph examples to be posted online was Galleries by Morpheus. In late 1991 Yeti Productions employed a young Stephen Regelous to run it's 486 computer graphics system in Wellington New Zealand. After producer Barry Thomas showed him Michael Jackson's "Black or White", Regelous wrote 10,000 lines of C++ code of triangle-based digital morphing software. Together they created morphing based TV commercials for The NZ Cancer Society, Fit food, Salvation Army and others. The Fit food commercial employed morphing with 35mm, pin registered, digitally controlled motion control designed and made by Russell Collins with software by Stephen Regelous. In Taiwan, Aderans, a hair loss solutions provider, did a TV commercial featuring a morphing sequence in which people with lush, thick hair morph into one another, reminiscent of the end sequence of the "Black or White" video. === Present use === Morphing algorithms continue to advance and programs can automatically morph images that correspond closely enough with relatively little instruction from the user. This has led to the use of morphing techniques to create convincing slow-motion effects where none existed in the original film or video footage by morphing between each individual frame using optical flow technology. Morphing has also appeared as a transition technique between one scene and another in television shows, even if the contents of the two images are entirely unrelated. The algorithm in this case attempts to find corresponding points between the images and distort one into the other as they crossfade. While perhaps less obvious than in the past, morphing is used heavily today. Whereas the effect was initially a novelty, today, morphing effects are most often designed to be seamless and invisible to the eye. A particular use for morphing effects is modern digital font design. Using morphing technology, called interpolation or multiple master tech, a designer can create an intermediate between two styles, for example generating a semibold font by compromising between a bold and regular style, or extend a trend to create an ultra-light or ultra-bold. The technique is commonly used by font design studios. == Software == After Effects Animate Elastic Reality FantaMorph Gryphon Software Morph Morph Age Morpheus Nuke SilhouetteFX

  Read more →
• 

  Prosthesis

  In medicine, a prosthesis (pl.: prostheses; from Ancient Greek: πρόσθεσις, romanized: prósthesis, lit. 'addition, application, attachment'), or a prosthetic implant, is an artificial device that replaces a missing body part, which may be lost through physical trauma, disease, or a condition present at birth (congenital disorder). Prostheses may restore the normal functions of the missing body part, or may perform a cosmetic function. A person who has undergone an amputation is sometimes referred to as an amputee, Rehabilitation for someone with an amputation is primarily coordinated by a physiatrist as part of an inter-disciplinary team consisting of physiatrists, prosthetists, nurses, physical therapists, and occupational therapists. Prostheses can be created by hand or with computer-aided design (CAD), a software interface that helps creators design and analyze the creation with computer-generated 2-D and 3-D graphics as well as analysis and optimization tools. == Types == A person's prosthetic device should be designed and assembled to meet their individual appearance and functional needs. Depending on personal circumstances, co-morbidities, budget or health insurance coverage, and access to medical care, decisions may need to balance aesthetics and function. In addition, for some individuals, a myoelectric device, a body-powered device, or an activity-specific device may be appropriate options. The person's future goals and vocational aspirations and potential capabilities may help them choose between one or more devices. Craniofacial prostheses include intra-oral and extra-oral prostheses. Extra-oral prostheses are further divided into hemifacial, auricular (ear), nasal, orbital and ocular. Intra-oral prostheses include dental prostheses, such as dentures, obturators, and dental implants. Prostheses of the neck include larynx substitutes, trachea and upper esophageal replacements, Some prostheses of the torso include breast prostheses which may be either single or bilateral, full breast devices or nipple prostheses. Penile prostheses are used to treat erectile dysfunction, perform phalloplasty procedures in men, and to build a new penis in female-to-male gender reassignment surgeries. === Limb prostheses === Limb prostheses include both upper- and lower-extremity prostheses. Upper-extremity prostheses are used at varying levels of amputation: forequarter, shoulder disarticulation, transhumeral prosthesis, elbow disarticulation, transradial prosthesis, wrist disarticulation, full hand, partial hand, finger, partial finger. A transradial prosthesis is an artificial limb that replaces an arm missing below the elbow. Upper limb prostheses can be categorized in three main categories: Passive devices, Body Powered devices, and Externally Powered (myoelectric) devices. Passive devices can either be passive hands, mainly used for cosmetic purposes, or passive tools, mainly used for specific activities (e.g. leisure or vocational). An extensive overview and classification of passive devices can be found in a literature review by Maat et.al. A passive device can be static, meaning the device has no movable parts, or it can be adjustable, meaning its configuration can be adjusted (e.g. adjustable hand opening). Despite the absence of active grasping, passive devices are very useful in bimanual tasks that require fixation or support of an object, or for gesticulation in social interaction. According to scientific data a third of the upper limb amputees worldwide use a passive prosthetic hand. Body Powered or cable-operated limbs work by attaching a harness and cable around the opposite shoulder of the damaged arm. A recent body-powered approach has explored the utilization of the user's breathing to power and control the prosthetic hand to help eliminate actuation cable and harness. The third category of available prosthetic devices comprises myoelectric arms. This particular class of devices distinguishes itself from the previous ones due to the inclusion of a battery system. This battery serves the dual purpose of providing energy for both actuation and sensing components. While actuation predominantly relies on motor or pneumatic systems, a variety of solutions have been explored for capturing muscle activity, including techniques such as Electromyography, Sonomyography, Myokinetic, and others. These methods function by detecting the minute electrical currents generated by contracted muscles during upper arm movement, typically employing electrodes or other suitable tools. Subsequently, these acquired signals are converted into gripping patterns or postures that the artificial hand will then execute. In the prosthetics industry, a trans-radial prosthetic arm is often referred to as a "BE" or below elbow prosthesis. Lower-extremity prostheses provide replacements at varying levels of amputation. These include hip disarticulation, transfemoral prosthesis, knee disarticulation, transtibial prosthesis, Syme's amputation, foot, partial foot, and toe. The two main subcategories of lower extremity prosthetic devices are trans-tibial (any amputation transecting the tibia bone or a congenital anomaly resulting in a tibial deficiency) and trans-femoral (any amputation transecting the femur bone or a congenital anomaly resulting in a femoral deficiency). A transfemoral prosthesis is an artificial limb that replaces a leg missing above the knee. Transfemoral amputees can have a very difficult time regaining normal movement. In general, a transfemoral amputee must use approximately 80% more energy to walk than a person with two whole legs. This is due to the complexities in movement associated with the knee. In newer and more improved designs, hydraulics, carbon fiber, mechanical linkages, motors, computer microprocessors, and innovative combinations of these technologies are employed to give more control to the user. In the prosthetics industry, a trans-femoral prosthetic leg is often referred to as an "AK" or above the knee prosthesis. A transtibial prosthesis is an artificial limb that replaces a leg missing below the knee. A transtibial amputee is usually able to regain normal movement more readily than someone with a transfemoral amputation, due in large part to retaining the knee, which allows for easier movement. Lower extremity prosthetics describe artificially replaced limbs located at the hip level or lower. In the prosthetics industry, a transtibial prosthetic leg is often referred to as a "BK" or below the knee prosthesis. Prostheses are manufactured and fit by clinical prosthetists. Prosthetists are healthcare professionals responsible for making, fitting, and adjusting prostheses and for lower limb prostheses will assess both gait and prosthetic alignment. Once a prosthesis has been fit and adjusted by a prosthetist, a rehabilitation physiotherapist (called physical therapist in America) will help teach a new prosthetic user to walk with a leg prosthesis. To do so, the physical therapist may provide verbal instructions and may also help guide the person using touch or tactile cues. This may be done in a clinic or home. There is some research suggesting that such training in the home may be more successful if the treatment includes the use of a treadmill. Using a treadmill, along with the physical therapy treatment, helps the person to experience many of the challenges of walking with a prosthesis. In the United Kingdom, 75% of lower limb amputations are performed due to inadequate circulation (dysvascularity). This condition is often associated with many other medical conditions (co-morbidities) including diabetes and heart disease that may make it a challenge to recover and use a prosthetic limb to regain mobility and independence. For people who have inadequate circulation and have lost a lower limb, there is insufficient evidence due to a lack of research, to inform them regarding their choice of prosthetic rehabilitation approaches. Lower extremity prostheses are often categorized by the level of amputation or after the name of a surgeon: Transfemoral (Above-knee) Transtibial (Below-knee) Ankle disarticulation (more commonly known as Syme's amputation) Knee disarticulation (also see knee replacement) Hip disarticulation, (also see hip replacement) Hemi-pelvictomy Partial foot amputations (Pirogoff, Talo-Navicular and Calcaneo-cuboid (Chopart), Tarso-metatarsal (Lisfranc), Trans-metatarsal, Metatarsal-phalangeal, Ray amputations, toe amputations). Van Nes rotationplasty ==== Prosthetic raw materials ==== Prosthetic are made lightweight for better convenience for the amputee. Some of these materials include: Plastics: Polyethylene Polypropylene Acrylics Polyurethane Wood (early prosthetics) Rubber (early prosthetics) Lightweight metals: Aluminum Composites: Carbon fiber reinforced polymers Wheeled prostheses have also been used extensively in the rehabilitation of injured domestic animals, including dogs, cats, pigs, rabbits, and

  Read more →
• 

  2018 Google data breach

  The 2018 Google data breach was a major data privacy scandal in which the Google+ API exposed the private data of over five hundred thousand users. Google+ managers first noticed harvesting of personal data in March 2018, during a review following the Facebook–Cambridge Analytica data scandal. The bug, despite having been fixed immediately, exposed the private data of approximately 500,000 Google+ users to the public. Google did not reveal the leak to the network's users. In November 2018, another data breach occurred following an update to the Google+ API. Although Google found no evidence of failure, approximately 52.5 million personal profiles were potentially exposed. In August 2019, Google declared a shutdown of Google+ due to low use and technological challenges. == Overview of Google+ == Google+ was launched in June 2011 as an invite-only social network, but was opened for public access later in the year. It was managed by Vic Gundotra. Similar to Facebook, Google+ also included key features Circles, Hangouts and Sparks. Circles let users personalize their social groups by sorting friends into different categories. Once allowed into a Circle, users could regulate information in their individual spaces. Hangouts included video chatting and instant messaging between users. Sparks allowed Google to track users' past searches to find news and content related to their interests. Google+ was linked to other Google services, such as YouTube, Google Drive and Gmail, giving it access to roughly 2 billion user accounts. However, less than 400 million consumers actively used Google+, with 90% of those users using it for less than five seconds. == The breaches == In March 2018, Google developers found a data breach within the Google+ People API in which external apps acquired access to Profile fields that were not marked as public. According to The Wall Street Journal, Google didn’t disclose the breach when it was first discovered in March to avoid regulatory scrutiny and reputational damage. 500,000 Google+ accounts were included in the breach, which allowed 438 external apps unauthorized access to private users' names, emails, addresses, occupations, genders and ages. This information was available between 2015 and 2018. Google found no evidence of any user's personal information being misused, nor that any third-party app developers were aware of the leak. In November 2018, a software update created another data breach within the Google+ API. The bug impacted 52.5 million users, where, similarly to the March breach, unauthorized apps were able to access Google+ profiles, including users' names, email addresses, occupations and ages. Apps could not access financial information, national identification, numbers, or passwords. Blog posts, messages and phone numbers also remained inaccessible if marked as private. Unlike the previous breach, access was only available for six days before Google+ learned of the breach. Once more, Google+ found no evidence of data being misused by third-party developers. == Responses == In October 2018, the Wall Street Journal published an article outlining the initial breach and Google's decision to not disclose it to users. At the time, there was no federal law that required Google to inform their consumers of data breaches. Google+ originally did not disclose the breach out of fears of being compared to Facebook's recent data leak and subsequent loss of consumer confidence. In response to the Wall Street Journal article, Google announced the shutdown of Google+ in August 2019. After the second data leak, the date was moved to April 2019. In response to the data breach, enterprise consumers were notified of the bug's impact and given instructions on how to save, download and delete their data prior to the Google+ shut down. Google's Privacy and Data Protection Office found no misuse of user data. Prior to the Google+ shutdown, Google set a 10-month period in which users could download and migrate their data. After the 10-month period, user content was deleted. On 4 February 2019, consumers were no longer able to create new Google+ profiles. Google shut down Google+ APIs on 7 March 2019 to ensure that developers did not continue to rely on the APIs prior to the Google+ shutdown. Google is the principal entity of its parent company, Alphabet Inc. After the data breach, Alphabet Inc. share prices fell by 1% to $1,157.06 on 9 October 2018 after an earlier drop of $1,135.40 that morning, the lowest price since 5 July 2018. After the publication of The Wall Street Journal article, share prices dropped as low as 2.1% in two days on 10 October 2018. Share prices steadily increased from this point and met the 8 October 2018 share price on 5 February 2019. Google planned to rebuild Google+ as a corporate enterprise network. Google Play will now assess which apps can ask for permission to access the user's SMS data. Only the default app for telephone distribution is able to make requests. Prior to the data breaches, apps were able to request access to all of a consumer's data simultaneously. Now, each app must request permission for each aspect of a consumer's profile.

  Read more →
• 

  Database dump

  A database dump contains a record of the table structure and/or the data from a database and is usually in the form of a list of SQL statements ("SQL dump"). A database dump is most often used for backing up a database so that its contents can be restored in the event of data loss. Corrupted databases can often be recovered by analysis of the dump. Database dumps are often published by free content projects, to facilitate reuse, forking, offline use, and long-term digital preservation. Dumps can be transported into environments with Internet blackouts or otherwise restricted Internet access, as well as facilitate local searching of the database using sophisticated tools such as grep.

  Read more →