AI Face Fixer

AI Face Fixer — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

• 

  Digital sculpting

  Digital sculpting, also known as sculpt modeling or 3D sculpting, is the use of software that offers tools to push, pull, smooth, grab, pinch or otherwise manipulate a digital object as if it were made of a real-life substance such as clay. == Sculpting technology == The geometry used in digital sculpting programs to represent the model can vary; each offers different benefits and limitations. The majority of digital sculpting tools on the market use mesh-based geometry, in which an object is represented by an interconnected surface mesh of polygons that can be pushed and pulled around. This is somewhat similar to the physical process of beating copper plates to sculpt a scene in relief. Other digital sculpting tools use voxel-based geometry, in which the volume of the object is the basic element. Material can be added and removed, much like sculpting in clay. Still other tools make use of more than one basic geometry representation. A benefit of mesh-based programs is that they support sculpting at multiple resolutions on a single model. Areas of the model that are finely detailed can have very small polygons while other areas can have larger polygons. In many mesh-based programs, the mesh can be edited at different levels of detail, and the changes at one level will propagate to higher and lower levels of model detail. A limitation of mesh-based sculpting is the fixed topology of the mesh; the specific arrangement of the polygons can limit the ways in which detail can be added or manipulated. A benefit of voxel-based sculpting is that voxels allow complete freedom over form. The topology of a model can be altered continually during the sculpting process as material is added and subtracted, which frees the sculptor from considering the layout of polygons on the model's surface. After sculpting, it may be necessary to retopologize the model to obtain a clean mesh for use in animation or real-time rendering. Voxels, however, are more limited in handling multiple levels of detail. Unlike mesh-based modeling, broad changes made to voxels at a low level of detail may completely destroy finer details. == Uses == Sculpting can often introduce details to meshes that would otherwise have been difficult or impossible to create using traditional 3D modeling techniques. This makes it preferable for achieving photorealistic and hyperrealistic results, though, many stylized results are achieved as well. Sculpting is primarily used in high poly organic modeling (the creation of 3D models which consist mainly of curves or irregular surfaces, as opposed to hard surface modeling). It is also used by auto manufacturers in their design of new cars. It can create the source meshes for low poly game models used in video games. In conjunction with other 3D modeling and texturing techniques and Displacement and Normal mapping, it can greatly enhance the appearance of game meshes often to the point of photorealism. Some sculpting programs like 3D-Coat, Zbrush, and Mudbox offer ways to integrate their workflows with traditional 3D modeling and rendering programs. Conversely, 3D modeling applications like 3ds Max, Maya and MODO are now incorporating sculpting capability as well, though these are usually less advanced than tools found in sculpting-specific applications. High poly sculpts are also extensively used in CG artwork for movies, industrial design, art, photorealistic illustrations, and for prototyping in 3D printing. == 3D print == Sculptors and digital artists use digital sculpting to create a model (or Digital Twin) to be materialized through CNC technologies including 3D printing. The final sculptures are often called Digital Sculpture or 3D printed art. While digital technologies have emerged in many art disciplines (painting, photography), this is less the case for digital sculpture due to the higher complexity and technology limitations to produce the final sculpture. == Sculpting Process == The best way to learn sculpture is by understanding primary, secondary and tertiary forms. First, break down the object you want to make down its basic shapes, such as a sphere or cube. Focus on making the large, overall shape of the object. After that, work on the bigger shapes on top of or inside the object. These can be protrusions or cut outs. Then, do a final detail pass, such as pores or lines to break up the shape. == Sculpting programs == There are a number of digital sculpting tools available. Some popular tools for creating are: Traditional 3D modeling suites are also beginning to include sculpting capability. 3D modeling programs which currently feature some form of sculpting include the following:

  Read more →
• 

  Averaged one-dependence estimators

  Averaged one-dependence estimators (AODE) is a probabilistic classification learning technique. It was developed to address the attribute-independence problem of the popular naive Bayes classifier. It frequently develops substantially more accurate classifiers than naive Bayes at the cost of a modest increase in the amount of computation. == The AODE classifier == AODE seeks to estimate the probability of each class y given a specified set of features x1, ... xn, P(y | x1, ... xn). To do so it uses the formula P ^ ( y ∣ x 1 , … x n ) = ∑ i : 1 ≤ i ≤ n ∧ F ( x i ) ≥ m P ^ ( y , x i ) ∏ j = 1 n P ^ ( x j ∣ y , x i ) ∑ y ′ ∈ Y ∑ i : 1 ≤ i ≤ n ∧ F ( x i ) ≥ m P ^ ( y ′ , x i ) ∏ j = 1 n P ^ ( x j ∣ y ′ , x i ) {\displaystyle {\hat {P}}(y\mid x_{1},\ldots x_{n})={\frac {\sum _{i:1\leq i\leq n\wedge F(x_{i})\geq m}{\hat {P}}(y,x_{i})\prod _{j=1}^{n}{\hat {P}}(x_{j}\mid y,x_{i})}{\sum _{y^{\prime }\in Y}\sum _{i:1\leq i\leq n\wedge F(x_{i})\geq m}{\hat {P}}(y^{\prime },x_{i})\prod _{j=1}^{n}{\hat {P}}(x_{j}\mid y^{\prime },x_{i})}}} where P ^ ( ⋅ ) {\displaystyle {\hat {P}}(\cdot )} denotes an estimate of P ( ⋅ ) {\displaystyle P(\cdot )} , F ( ⋅ ) {\displaystyle F(\cdot )} is the frequency with which the argument appears in the sample data and m is a user specified minimum frequency with which a term must appear in order to be used in the outer summation. In recent practice m is usually set at 1. == Derivation of the AODE classifier == We seek to estimate P(y | x1, ... xn). By the definition of conditional probability P ( y ∣ x 1 , … x n ) = P ( y , x 1 , … x n ) P ( x 1 , … x n ) . {\displaystyle P(y\mid x_{1},\ldots x_{n})={\frac {P(y,x_{1},\ldots x_{n})}{P(x_{1},\ldots x_{n})}}.} For any 1 ≤ i ≤ n {\displaystyle 1\leq i\leq n} , P ( y , x 1 , … x n ) = P ( y , x i ) P ( x 1 , … x n ∣ y , x i ) . {\displaystyle P(y,x_{1},\ldots x_{n})=P(y,x_{i})P(x_{1},\ldots x_{n}\mid y,x_{i}).} Under an assumption that x1, ... xn are independent given y and xi, it follows that P ( y , x 1 , … x n ) = P ( y , x i ) ∏ j = 1 n P ( x j ∣ y , x i ) . {\displaystyle P(y,x_{1},\ldots x_{n})=P(y,x_{i})\prod _{j=1}^{n}P(x_{j}\mid y,x_{i}).} This formula defines a special form of One Dependence Estimator (ODE), a variant of the naive Bayes classifier that makes the above independence assumption that is weaker (and hence potentially less harmful) than the naive Bayes' independence assumption. In consequence, each ODE should create a less biased estimator than naive Bayes. However, because the base probability estimates are each conditioned by two variables rather than one, they are formed from less data (the training examples that satisfy both variables) and hence are likely to have more variance. AODE reduces this variance by averaging the estimates of all such ODEs. == Features of the AODE classifier == Like naive Bayes, AODE does not perform model selection and does not use tuneable parameters. As a result, it has low variance. It supports incremental learning whereby the classifier can be updated efficiently with information from new examples as they become available. It predicts class probabilities rather than simply predicting a single class, allowing the user to determine the confidence with which each classification can be made. Its probabilistic model can directly handle situations where some data are missing. AODE has computational complexity O ( l n 2 ) {\displaystyle O(ln^{2})} at training time and O ( k n 2 ) {\displaystyle O(kn^{2})} at classification time, where n is the number of features, l is the number of training examples and k is the number of classes. This makes it infeasible for application to high-dimensional data. However, within that limitation, it is linear with respect to the number of training examples and hence can efficiently process large numbers of training examples. == Implementations == The free Weka machine learning suite includes an implementation of AODE.

  Read more →
• 

  Minimum Population Search

  In evolutionary computation, Minimum Population Search (MPS) is a computational method that optimizes a problem by iteratively trying to improve a set of candidate solutions with regard to a given measure of quality. It solves a problem by evolving a small population of candidate solutions by means of relatively simple arithmetical operations. MPS is a metaheuristic as it makes few or no assumptions about the problem being optimized and can search very large spaces of candidate solutions. For problems where finding the precise global optimum is less important than finding an acceptable local optimum in a fixed amount of time, using a metaheuristic such as MPS may be preferable to alternatives such as brute-force search or gradient descent. MPS is used for multidimensional real-valued functions but does not use the gradient of the problem being optimized, which means MPS does not require for the optimization problem to be differentiable as is required by classic optimization methods such as gradient descent and quasi-newton methods. MPS can therefore also be used on optimization problems that are not even continuous, are noisy, change over time, etc. == Background == In a similar way to Differential evolution, MPS uses difference vectors between the members of the population in order to generate new solutions. It attempts to provide an efficient use of function evaluations by maintaining a small population size. If the population size is smaller than the dimensionality of the search space, then the solutions generated through difference vectors will be constrained to the n − 1 {\displaystyle n-1} dimensional hyperplane. A smaller population size will lead to a more restricted subspace. With a population size equal to the dimensionality of the problem ( n = d ) {\displaystyle (n=d)} , the “line/hyperplane points” in MPS will be generated within a d − 1 {\displaystyle d-1} dimensional hyperplane. Taking a step orthogonal to this hyperplane will allow the search process to cover all the dimensions of the search space. Population size is a fundamental parameter in the performance of population-based heuristics. Larger populations promote exploration, but they also allow fewer generations, and this can reduce the chance of convergence. Searching with a small population can increase the chances of convergence and the efficient use of function evaluations, but it can also induce the risk of premature convergence. If the risk of premature convergence can be avoided, then a population-based heuristic could benefit from the efficiency and faster convergence rate of a smaller population. To avoid premature convergence, it is important to have a diversified population. By including techniques for explicitly increasing diversity and exploration, it is possible to have smaller populations with less risk of premature convergence. === Thresheld Convergence === Thresheld Convergence (TC) is a diversification technique which attempts to separate the processes of exploration and exploitation. TC uses a “threshold” function to establish a minimum search step, and managing this step makes it possible to influence the transition from exploration to exploitation, convergence is thus “held” back until the last stages of the search process. The goal of a controlled transition is to avoid an early concentration of the population around a few search regions and avoid the loss of diversity which can cause premature convergence. Thresheld Convergence has been successfully applied to several population-based metaheuristics such as Particle Swarm Optimization, Differential evolution, Evolution strategies, Simulated annealing and Estimation of Distribution Algorithms. The ideal case for Thresheld Convergence is to have one sample solution from each attraction basin, and for each sample solution to have the same relative fitness with respect to its local optimum. Enforcing a minimum step aims to achieve this ideal case. In MPS Thresheld Convergence is specifically used to preserve diversity and avoid premature convergence by establishing a minimum search step. By disallowing new solutions which are too close to members of the current population, TC forces a strong exploration during the early stages of the search while preserving the diversity of the (small) population. == Algorithm == A basic variant of the MPS algorithm works by having a population of size equal to the dimension of the problem. New solutions are generated by exploring the hyperplane defined by the current solutions (by means of difference vectors) and performing an additional orthogonal step in order to avoid getting caught in this hyperplane. The step sizes are controlled by the Thresheld Convergence technique, which gradually reduces step sizes as the search process advances. An outline for the algorithm is given below: Generate the first initial population. Allowing these solutions to lie near the bounds of the search space generally gives good results: s k = ( r s 1 ∗ b o u n d 1 / 2 , r s 2 ∗ b o u n d 2 / 2 , . . . , r s n ∗ b o u n d n / 2 ) {\displaystyle s_{k}=(rs_{1}bound_{1}/2,rs_{2}bound_{2}/2,...,rs_{n}bound_{n}/2)} where s k {\displaystyle s_{k}} is the k {\displaystyle k} -th population member, r s i {\displaystyle rs_{i}} are random numbers which can be −1 or 1, and the b o u n d i {\displaystyle bound_{i}} are the lower and upper bounds on each dimension. While a stop condition is not reached: Update threshold convergence values ( m i n _ s t e p {\displaystyle min\_step} and m a x _ s t e p {\displaystyle max\_step} ) Calculate the centroid of the current population ( x c {\displaystyle x_{c}} ) For each member of the population ( x i {\displaystyle x_{i}} ), generate a new offspring as follows: Uniformly generate a scaling factor ( F i {\displaystyle F_{i}} ) between − m a x _ s t e p {\displaystyle -max\_step} and m a x _ s t e p {\displaystyle max\_step} Generate a vector ( x o {\displaystyle x_{o}} ) orthogonal to the difference vector between x i {\displaystyle x_{i}} and x c {\displaystyle x_{c}} Calculate a scaling factor for the orthogonal vector: m i n _ o r t h = s q r t ( m a x ( m i n _ s t e p 2 − F i 2 , 0 ) ) {\displaystyle min\_orth=sqrt(max(min\_step^{2}-F_{i}^{2},0))} m a x _ o r t h = s q r t ( m a x ( m a x _ s t e p 2 − F i 2 , 0 ) ) {\displaystyle max\_orth=sqrt(max(max\_step^{2}-F_{i}^{2},0))} o r t h _ s t e p = u n i f o r m ( m i n _ o r t h , m a x _ o r t h ) {\displaystyle orth\_step=uniform(min\_orth,max\_orth)} Generate the new solution by adding the difference and the orthogonal vectors to the original solution n e w _ s o l u t i o n = x i + F i ∗ ( x i − x c ) ∗ o r t h _ s t e p ∗ x o {\displaystyle new\_solution=x_{i}+F_{i}(x_{i}-x_{c})orth\_stepx_{o}} Pick the best members between the old population and the new one by discarding the least fit members. Return the single best solution or the best population found as the final result.

  Read more →
• 

  Vanishing gradient problem

  In machine learning, the vanishing gradient problem is the problem of greatly diverging gradient magnitudes between earlier and later layers encountered when training neural networks with backpropagation. In such methods, neural network weights are updated proportional to their partial derivative of the loss function. As the number of forward propagation steps in a network increases, for instance due to greater network depth, the gradients of earlier weights are calculated with increasingly many multiplications. These multiplications shrink the gradient magnitude. Consequently, the gradients of earlier weights will be exponentially smaller than the gradients of later weights. This difference in gradient magnitude might introduce instability in the training process, slow it, or halt it entirely. For instance, consider the hyperbolic tangent activation function. The gradients of this function are in range [0,1]. The product of repeated multiplication with such gradients decreases exponentially. The inverse problem, when weight gradients at earlier layers get exponentially larger, is called the exploding gradient problem. Backpropagation allowed researchers to train supervised deep artificial neural networks from scratch, initially with little success. Hochreiter's diplom thesis of 1991 formally identified the reason for this failure in the "vanishing gradient problem", which not only affects many-layered feedforward networks, but also recurrent networks. The latter are trained by unfolding them into very deep feedforward networks, where a new layer is created for each time-step of an input sequence processed by the network (the combination of unfolding and backpropagation is termed backpropagation through time). == Prototypical models == This section is based on the paper On the difficulty of training Recurrent Neural Networks by Pascanu, Mikolov, and Bengio. === Recurrent network model === A generic recurrent network has hidden states h 1 , h 2 , … {\displaystyle h_{1},h_{2},\dots } , inputs u 1 , u 2 , … {\displaystyle u_{1},u_{2},\dots } , and outputs x 1 , x 2 , … {\displaystyle x_{1},x_{2},\dots } . Let it be parameterized by θ {\displaystyle \theta } , so that the system evolves as ( h t , x t ) = F ( h t − 1 , u t , θ ) {\displaystyle (h_{t},x_{t})=F(h_{t-1},u_{t},\theta )} Often, the output x t {\displaystyle x_{t}} is a function of h t {\displaystyle h_{t}} , as some x t = G ( h t ) {\displaystyle x_{t}=G(h_{t})} . The vanishing gradient problem already presents itself clearly when x t = h t {\displaystyle x_{t}=h_{t}} , so we simplify our notation to the special case with: x t = F ( x t − 1 , u t , θ ) {\displaystyle x_{t}=F(x_{t-1},u_{t},\theta )} Now, take its differential: d x t = ∇ θ F ( x t − 1 , u t , θ ) d θ + ∇ x F ( x t − 1 , u t , θ ) d x t − 1 = ∇ θ F ( x t − 1 , u t , θ ) d θ + ∇ x F ( x t − 1 , u t , θ ) [ ∇ θ F ( x t − 2 , u t − 1 , θ ) d θ + ∇ x F ( x t − 2 , u t − 1 , θ ) d x t − 2 ] ⋮ = [ ∇ θ F ( x t − 1 , u t , θ ) + ∇ x F ( x t − 1 , u t , θ ) ∇ θ F ( x t − 2 , u t − 1 , θ ) + ⋯ ] d θ {\displaystyle {\begin{aligned}dx_{t}&=\nabla _{\theta }F(x_{t-1},u_{t},\theta )d\theta +\nabla _{x}F(x_{t-1},u_{t},\theta )dx_{t-1}\\&=\nabla _{\theta }F(x_{t-1},u_{t},\theta )d\theta +\nabla _{x}F(x_{t-1},u_{t},\theta )\left[\nabla _{\theta }F(x_{t-2},u_{t-1},\theta )d\theta +\nabla _{x}F(x_{t-2},u_{t-1},\theta )dx_{t-2}\right]\\&\;\;\vdots \\&=\left[\nabla _{\theta }F(x_{t-1},u_{t},\theta )+\nabla _{x}F(x_{t-1},u_{t},\theta )\nabla _{\theta }F(x_{t-2},u_{t-1},\theta )+\cdots \right]d\theta \end{aligned}}} Training the network requires us to define a loss function to be minimized. Let it be L ( x T , u 1 , … , u T ) {\displaystyle L(x_{T},u_{1},\dots ,u_{T})} , then minimizing it by gradient descent gives Δ θ = − η ⋅ [ ∇ x L ( x T ) ( ∇ θ F ( x t − 1 , u t , θ ) + ∇ x F ( x t − 1 , u t , θ ) ∇ θ F ( x t − 2 , u t − 1 , θ ) + ⋯ ) ] T {\displaystyle \Delta \theta =-\eta \cdot \left[\nabla _{x}L(x_{T})\left(\nabla _{\theta }F(x_{t-1},u_{t},\theta )+\nabla _{x}F(x_{t-1},u_{t},\theta )\nabla _{\theta }F(x_{t-2},u_{t-1},\theta )+\cdots \right)\right]^{T}} where η {\displaystyle \eta } is the learning rate. The vanishing/exploding gradient problem appears because there are repeated multiplications, of the form ∇ x F ( x t − 1 , u t , θ ) ∇ x F ( x t − 2 , u t − 1 , θ ) ∇ x F ( x t − 3 , u t − 2 , θ ) ⋯ {\displaystyle \nabla _{x}F(x_{t-1},u_{t},\theta )\nabla _{x}F(x_{t-2},u_{t-1},\theta )\nabla _{x}F(x_{t-3},u_{t-2},\theta )\cdots } ==== Example: recurrent network with sigmoid activation ==== For a concrete example, consider a typical recurrent network defined by x t = F ( x t − 1 , u t , θ ) = W rec σ ( x t − 1 ) + W in u t + b {\displaystyle x_{t}=F(x_{t-1},u_{t},\theta )=W_{\text{rec}}\sigma (x_{t-1})+W_{\text{in}}u_{t}+b} where θ = ( W rec , W in ) {\displaystyle \theta =(W_{\text{rec}},W_{\text{in}})} is the network parameter, σ {\displaystyle \sigma } is the sigmoid activation function, applied to each vector coordinate separately, and b {\displaystyle b} is the bias vector. Then, ∇ x F ( x t − 1 , u t , θ ) = W rec diag ⁡ ( σ ′ ( x t − 1 ) ) {\displaystyle \nabla _{x}F(x_{t-1},u_{t},\theta )=W_{\text{rec}}\operatorname {diag} (\sigma '(x_{t-1}))} , and so ∇ x F ( x t − 1 , u t , θ ) ∇ x F ( x t − 2 , u t − 1 , θ ) ⋯ ∇ x F ( x t − k , u t − k + 1 , θ ) = W rec diag ⁡ ( σ ′ ( x t − 1 ) ) W rec diag ⁡ ( σ ′ ( x t − 2 ) ) ⋯ W rec diag ⁡ ( σ ′ ( x t − k ) ) {\displaystyle {\begin{aligned}&\nabla _{x}F(x_{t-1},u_{t},\theta )\nabla _{x}F(x_{t-2},u_{t-1},\theta )\cdots \nabla _{x}F(x_{t-k},u_{t-k+1},\theta )\\&=W_{\text{rec}}\operatorname {diag} (\sigma '(x_{t-1}))W_{\text{rec}}\operatorname {diag} (\sigma '(x_{t-2}))\cdots W_{\text{rec}}\operatorname {diag} (\sigma '(x_{t-k}))\end{aligned}}} Since | σ ′ | ≤ 1 {\displaystyle \left|\sigma '\right|\leq 1} , the operator norm of the above multiplication is bounded above by ‖ W rec ‖ k {\displaystyle \left\|W_{\text{rec}}\right\|^{k}} . So if the spectral radius of W rec {\displaystyle W_{\text{rec}}} is γ < 1 {\displaystyle \gamma <1} , then at large k {\displaystyle k} , the above multiplication has operator norm bounded above by γ k → 0 {\displaystyle \gamma ^{k}\to 0} . This is the prototypical vanishing gradient problem. The effect of a vanishing gradient is that the network cannot learn long-range effects. Recall Equation (loss differential): ∇ θ L = ∇ x L ( x T , u 1 , … , u T ) [ ∇ θ F ( x t − 1 , u t , θ ) + ∇ x F ( x t − 1 , u t , θ ) ∇ θ F ( x t − 2 , u t − 1 , θ ) + ⋯ ] {\displaystyle \nabla _{\theta }L=\nabla _{x}L(x_{T},u_{1},\dots ,u_{T})\left[\nabla _{\theta }F(x_{t-1},u_{t},\theta )+\nabla _{x}F(x_{t-1},u_{t},\theta )\nabla _{\theta }F(x_{t-2},u_{t-1},\theta )+\cdots \right]} The components of ∇ θ F ( x , u , θ ) {\displaystyle \nabla _{\theta }F(x,u,\theta )} are just components of σ ( x ) {\displaystyle \sigma (x)} and u {\displaystyle u} , so if u t , u t − 1 , … {\displaystyle u_{t},u_{t-1},\dots } are bounded, then ‖ ∇ θ F ( x t − k − 1 , u t − k , θ ) ‖ {\displaystyle \left\|\nabla _{\theta }F(x_{t-k-1},u_{t-k},\theta )\right\|} is also bounded by some M > 0 {\displaystyle M>0} , and so the terms in ∇ θ L {\displaystyle \nabla _{\theta }L} decay as M γ k {\displaystyle M\gamma ^{k}} . This means that, effectively, ∇ θ L {\displaystyle \nabla _{\theta }L} is affected only by the first O ( γ − 1 ) {\displaystyle O(\gamma ^{-1})} terms in the sum. If γ ≥ 1 {\displaystyle \gamma \geq 1} , the above analysis does not quite work. For the prototypical exploding gradient problem, the next model is clearer. === Dynamical systems model === Following (Doya, 1993), consider this one-neuron recurrent network with sigmoid activation: x t + 1 = ( 1 − ε ) x t + ε σ ( w x t + b ) + ε w ′ u t {\displaystyle x_{t+1}=(1-\varepsilon )x_{t}+\varepsilon \sigma (wx_{t}+b)+\varepsilon w'u_{t}} At the small ε {\displaystyle \varepsilon } limit, the dynamics of the network becomes d x d t = − x ( t ) + σ ( w x ( t ) + b ) + w ′ u ( t ) {\displaystyle {\frac {dx}{dt}}=-x(t)+\sigma (wx(t)+b)+w'u(t)} Consider first the autonomous case, with u = 0 {\displaystyle u=0} . Set w = 5.0 {\displaystyle w=5.0} , and vary b {\displaystyle b} in [ − 3 , − 2 ] {\displaystyle [-3,-2]} . As b {\displaystyle b} decreases, the system has 1 stable point, then has 2 stable points and 1 unstable point, and finally has 1 stable point again. Explicitly, the stable points are ( x , b ) = ( x , ln ⁡ ( x 1 − x ) − 5 x ) {\displaystyle (x,b)=\left(x,\ln \left({\frac {x}{1-x}}\right)-5x\right)} . Now consider Δ x ( T ) Δ x ( 0 ) {\displaystyle {\frac {\Delta x(T)}{\Delta x(0)}}} and Δ x ( T ) Δ b {\displaystyle {\frac {\Delta x(T)}{\Delta b}}} , where T {\displaystyle T} is large enough that the system has settled into one of the stable points. If ( x ( 0 ) , b ) {\displaystyle (x(0),b)} puts the system very close to an unstable point, then a tiny variation in x ( 0 ) {\displaystyle x(0)} or b {\displaystyle b} wo

  Read more →
• 

  Transportation Economic Development Impact System

  Transportation Economic Development Impact System (TREDIS) is an economic analysis system sold by consulting firm Economic Development Research Group that is used in planning major transportation investments in the US and Canada. The role of economic impact analysis and TREDIS in the transportation planning process is explained in guidebooks of the US Department of Transportation and the American Association of State Highway and Transportation Officials. TREDIS has been most commonly used for assessing the expected economic impacts of statewide highway programs, regional multi-modal plans and public transport investment. Its history and theoretical foundation are explained in peer reviewed journal articles. == How It Works == TREDIS has a series of modules that calculate different forms of impacts and benefits. One module is an accounting framework that calculates user benefits, including impacts on cargo transportation and commuting costs, based on transportation forecasting results. A second module calculates wider economic development benefits, including impacts on business productivity, economic development and multiplier effects from the input-output analysis. It applies an economic model to estimate impacts on jobs, income, gross regional product and business output, by sector of the economy. A third module applies cost-benefit analysis from alternative perspectives.

  Read more →
• 

  Modern Hopfield network

  Modern Hopfield networks (also known as Dense Associative Memories) are generalizations of the classical Hopfield networks that break the linear scaling relationship between the number of input features and the number of stored memories. This is achieved by introducing stronger non-linearities (either in the energy function or neurons’ activation functions) leading to super-linear (even an exponential) memory storage capacity as a function of the number of feature neurons. The network still requires a sufficient number of hidden neurons. The key theoretical idea behind the modern Hopfield networks is to use an energy function and an update rule that is more sharply peaked around the stored memories in the space of neuron’s configurations compared to the classical Hopfield network. == Classical Hopfield networks == Hopfield networks are recurrent neural networks with dynamical trajectories converging to fixed point attractor states and described by an energy function. The state of each model neuron i {\textstyle i} is defined by a time-dependent variable V i {\displaystyle V_{i}} , which can be chosen to be either discrete or continuous. A complete model describes the mathematics of how the future state of activity of each neuron depends on the known present or previous activity of all the neurons. In the original Hopfield model of associative memory, the variables were binary, and the dynamics were described by a one-at-a-time update of the state of the neurons. An energy function quadratic in the V i {\displaystyle V_{i}} was defined, and the dynamics consisted of changing the activity of each single neuron i {\displaystyle i} only if doing so would lower the total energy of the system. This same idea was extended to the case of V i {\displaystyle V_{i}} being a continuous variable representing the output of neuron i {\displaystyle i} , and V i {\displaystyle V_{i}} being a monotonic function of an input current. The dynamics became expressed as a set of first-order differential equations for which the "energy" of the system always decreased. The energy in the continuous case has one term which is quadratic in the V i {\displaystyle V_{i}} (as in the binary model), and a second term which depends on the gain function (neuron's activation function). While having many desirable properties of associative memory, both of these classical systems suffer from a small memory storage capacity, which scales linearly with the number of input features. == Discrete variables == A simple example of the Modern Hopfield network can be written in terms of binary variables V i {\displaystyle V_{i}} that represent the active V i = + 1 {\displaystyle V_{i}=+1} and inactive V i = − 1 {\displaystyle V_{i}=-1} state of the model neuron i {\displaystyle i} . E = − ∑ μ = 1 N mem F ( ∑ i = 1 N f ξ μ i V i ) {\displaystyle E=-\sum \limits _{\mu =1}^{N_{\text{mem}}}F{\Big (}\sum \limits _{i=1}^{N_{f}}\xi _{\mu i}V_{i}{\Big )}} In this formula the weights ξ μ i {\textstyle \xi _{\mu i}} represent the matrix of memory vectors (index μ = 1... N mem {\displaystyle \mu =1...N_{\text{mem}}} enumerates different memories, and index i = 1... N f {\displaystyle i=1...N_{f}} enumerates the content of each memory corresponding to the i {\displaystyle i} -th feature neuron), and the function F ( x ) {\displaystyle F(x)} is a rapidly growing non-linear function. The update rule for individual neurons (in the asynchronous case) can be written in the following form V i ( t + 1 ) = sign ⁡ [ ∑ μ = 1 N mem ( F ( ξ μ i + ∑ j ≠ i ξ μ j V j ( t ) ) − F ( − ξ μ i + ∑ j ≠ i ξ μ j V j ( t ) ) ) ] {\displaystyle V_{i}^{(t+1)}=\operatorname {sign} {\bigg [}\sum \limits _{\mu =1}^{N_{\text{mem}}}{\bigg (}F{\Big (}\xi _{\mu i}+\sum \limits _{j\neq i}\xi _{\mu j}V_{j}^{(t)}{\Big )}-F{\Big (}-\xi _{\mu i}+\sum \limits _{j\neq i}\xi _{\mu j}V_{j}^{(t)}{\Big )}{\bigg )}{\bigg ]}} which states that in order to calculate the updated state of the i {\textstyle i} -th neuron the network compares two energies: the energy of the network with the i {\displaystyle i} -th neuron in the ON state and the energy of the network with the i {\displaystyle i} -th neuron in the OFF state, given the states of the remaining neuron. The updated state of the i {\displaystyle i} -th neuron selects the state that has the lowest of the two energies. In the limiting case when the non-linear energy function is quadratic F ( x ) = x 2 {\displaystyle F(x)=x^{2}} these equations reduce to the familiar energy function and the update rule for the classical binary Hopfield network. The memory storage capacity of these networks can be calculated for random binary patterns. For the power energy function F ( x ) = x n {\displaystyle F(x)=x^{n}} the maximal number of memories that can be stored and retrieved from this network without errors is given by N mem max ≈ 1 2 ( 2 n − 3 ) ! ! N f n − 1 ln ⁡ ( N f ) {\displaystyle N_{\text{mem}}^{\max }\approx {\frac {1}{2(2n-3)!!}}{\frac {N_{f}^{n-1}}{\ln(N_{f})}}} For an exponential energy function F ( x ) = e x {\textstyle F(x)=e^{x}} the memory storage capacity is exponential in the number of feature neurons N mem max ≈ 2 N f / 2 {\displaystyle N_{\text{mem}}^{\max }\approx 2^{N_{f}/2}} == Continuous variables == Modern Hopfield networks or Dense Associative Memories can be best understood in continuous variables and continuous time. Consider the network architecture, shown in Fig.1, and the equations for the neurons' state evolutionwhere the currents of the feature neurons are denoted by x i {\textstyle x_{i}} , and the currents of the memory neurons are denoted by h μ {\displaystyle h_{\mu }} ( h {\displaystyle h} stands for hidden neurons). There are no synaptic connections among the feature neurons or the memory neurons. A matrix ξ μ i {\displaystyle \xi _{\mu i}} denotes the strength of synapses from a feature neuron i {\displaystyle i} to the memory neuron μ {\displaystyle \mu } . The synapses are assumed to be symmetric, so that the same value characterizes a different physical synapse from the memory neuron μ {\displaystyle \mu } to the feature neuron i {\displaystyle i} . The outputs of the memory neurons and the feature neurons are denoted by f μ {\displaystyle f_{\mu }} and g i {\displaystyle g_{i}} , which are non-linear functions of the corresponding currents. In general these outputs can depend on the currents of all the neurons in that layer so that f μ = f ( { h μ } ) {\displaystyle f_{\mu }=f(\{h_{\mu }\})} and g i = g ( { x i } ) {\textstyle g_{i}=g(\{x_{i}\})} . It is convenient to define these activation function as derivatives of the Lagrangian functions for the two groups of neuronsThis way the specific form of the equations for neuron's states is completely defined once the Lagrangian functions are specified. Finally, the time constants for the two groups of neurons are denoted by τ f {\displaystyle \tau _{f}} and τ h {\displaystyle \tau _{h}} , I i {\displaystyle I_{i}} is the input current to the network that can be driven by the presented data. General systems of non-linear differential equations can have many complicated behaviors that can depend on the choice of the non-linearities and the initial conditions. For Hopfield networks, however, this is not the case - the dynamical trajectories always converge to a fixed point attractor state. This property is achieved because these equations are specifically engineered so that they have an underlying energy function The terms grouped into square brackets represent a Legendre transform of the Lagrangian function with respect to the states of the neurons. If the Hessian matrices of the Lagrangian functions are positive semi-definite, the energy function is guaranteed to decrease on the dynamical trajectory This property makes it possible to prove that the system of dynamical equations describing temporal evolution of neurons' activities will eventually reach a fixed point attractor state. In certain situations one can assume that the dynamics of hidden neurons equilibrates at a much faster time scale compared to the feature neurons, τ h ≪ τ f {\textstyle \tau _{h}\ll \tau _{f}} . In this case the steady state solution of the second equation in the system (1) can be used to express the currents of the hidden units through the outputs of the feature neurons. This makes it possible to reduce the general theory (1) to an effective theory for feature neurons only. The resulting effective update rules and the energies for various common choices of the Lagrangian functions are shown in Fig.2. In the case of log-sum-exponential Lagrangian function the update rule (if applied once) for the states of the feature neurons is the attention mechanism commonly used in many modern AI systems (see Ref. for the derivation of this result from the continuous time formulation). == Relationship to classical Hopfield network with continuous variables == Classical formulation of continuous Hopfield networks can be understood as a

  Read more →
• 

  Independent component analysis

  In signal processing, independent component analysis (ICA) is a computational method for separating a multivariate signal into additive subcomponents. This is done by assuming that at most one subcomponent is Gaussian and that the subcomponents are statistically independent from each other. ICA was invented by Jeanny Hérault and Christian Jutten in 1985. ICA is a special case of blind source separation. A common example application of ICA is the "cocktail party problem" of listening in on one person's speech in a noisy room. == Introduction == Independent component analysis attempts to decompose a multivariate signal into independent non-Gaussian signals. As an example, sound is usually a signal that is composed of the numerical addition, at each time t, of signals from several sources. The question then is whether it is possible to separate these contributing sources from the observed total signal. When the statistical independence assumption is correct, blind ICA separation of a mixed signal gives very good results. It is also used for signals that are not supposed to be generated by mixing for analysis purposes. A simple application of ICA is the "cocktail party problem", where the underlying speech signals are separated from a sample data consisting of people talking simultaneously in a room. Usually the problem is simplified by assuming no time delays or echoes. Note that a filtered and delayed signal is a copy of a dependent component, and thus the statistical independence assumption is not violated. Mixing weights for constructing the M {\textstyle M} observed signals from the N {\textstyle N} components can be placed in an M × N {\textstyle M\times N} matrix. An important thing to consider is that if N {\textstyle N} sources are present, at least N {\textstyle N} observations (e.g. microphones if the observed signal is audio) are needed to recover the original signals. When there are an equal number of observations and source signals, the mixing matrix is square ( M = N {\textstyle M=N} ). Other cases of underdetermined ( M < N {\textstyle M N {\textstyle M>N} ) have been investigated. The success of ICA separation of mixed signals relies on two assumptions and three effects of mixing source signals. Two assumptions: The source signals are independent of each other. The values in each source signal have non-Gaussian distributions. Three effects of mixing source signals: Independence: As per assumption 1, the source signals are independent; however, their signal mixtures are not. This is because the signal mixtures share the same source signals. Normality: According to the Central Limit Theorem, the distribution of a sum of independent random variables with finite variance tends towards a Gaussian distribution.Loosely speaking, a sum of two independent random variables usually has a distribution that is closer to Gaussian than any of the two original variables. Here we consider the value of each signal as the random variable. Complexity: The temporal complexity of any signal mixture is greater than that of its simplest constituent source signal. Those principles contribute to the basic establishment of ICA. If the signals extracted from a set of mixtures are independent and have non-Gaussian distributions or have low complexity, then they must be source signals. Another common example is image steganography, where ICA is used to embed one image within another. For instance, two grayscale images can be linearly combined to create mixed images in which the hidden content is visually imperceptible. ICA can then be used to recover the original source images from the mixtures. This technique underlies digital watermarking, which allows the embedding of ownership information into images, as well as more covert applications such as undetected information transmission. The method has even been linked to real-world cyberespionage cases. In such applications, ICA serves to unmix the data based on statistical independence, making it possible to extract hidden components that are not apparent in the observed data. Steganographic techniques, including those potentially involving ICA-based analysis, have been used in real-world cyberespionage cases. In 2010, the FBI uncovered a Russian spy network known as the "Illegals Program" (Operation Ghost Stories), where agents used custom-built steganography tools to conceal encrypted text messages within image files shared online. In another case, a former General Electric engineer, Xiaoqing Zheng, was convicted in 2022 for economic espionage. Zheng used steganography to exfiltrate sensitive turbine technology by embedding proprietary data within image files for transfer to entities in China. == Defining component independence == ICA finds the independent components (also called factors, latent variables or sources) by maximizing the statistical independence of the estimated components. We may choose one of many ways to define a proxy for independence, and this choice governs the form of the ICA algorithm. The two broadest definitions of independence for ICA are Minimization of mutual information Maximization of non-Gaussianity The Minimization-of-Mutual information (MMI) family of ICA algorithms uses measures like Kullback-Leibler Divergence and maximum entropy. The non-Gaussianity family of ICA algorithms, motivated by the central limit theorem, uses kurtosis and negentropy. Typical algorithms for ICA use centering (subtract the mean to create a zero mean signal), whitening (usually with the eigenvalue decomposition), and dimensionality reduction as preprocessing steps in order to simplify and reduce the complexity of the problem for the actual iterative algorithm. == Mathematical definitions == Linear independent component analysis can be divided into noiseless and noisy cases, where noiseless ICA is a special case of noisy ICA. Nonlinear ICA should be considered as a separate case. === General Derivation === In the classical ICA model, it is assumed that the observed data x i ∈ R m {\displaystyle \mathbf {x} _{i}\in \mathbb {R} ^{m}} at time t i {\displaystyle t_{i}} is generated from source signals s i ∈ R m {\displaystyle \mathbf {s} _{i}\in \mathbb {R} ^{m}} via a linear transformation x i = A s i {\displaystyle \mathbf {x} _{i}=A\mathbf {s} _{i}} , where A {\displaystyle A} is an unknown, invertible mixing matrix. To recover the source signals, the data is first centered (zero mean), and then whitened so that the transformed data has unit covariance. This whitening reduces the problem from estimating a general matrix A {\displaystyle A} to estimating an orthogonal matrix V {\displaystyle V} , significantly simplifying the search for independent components. If the covariance matrix of the centered data is Σ x = A A ⊤ {\displaystyle \Sigma _{x}=AA^{\top }} , then using the eigen-decomposition Σ x = Q D Q ⊤ {\displaystyle \Sigma _{x}=QDQ^{\top }} , the whitening transformation can be taken as D − 1 / 2 Q ⊤ {\displaystyle D^{-1/2}Q^{\top }} . This step ensures that the recovered sources are uncorrelated and of unit variance, leaving only the task of rotating the whitened data to maximize statistical independence. This general derivation underlies many ICA algorithms and is foundational in understanding the ICA model. ==== Reduced Mixing Problem ==== Independent component analysis (ICA) addresses the problem of recovering a set of unobserved source signals s i = ( s i 1 , s i 2 , … , s i m ) T {\displaystyle s_{i}=(s_{i1},s_{i2},\dots ,s_{im})^{T}} from observed mixed signals x i = ( x i 1 , x i 2 , … , x i m ) T {\displaystyle x_{i}=(x_{i1},x_{i2},\dots ,x_{im})^{T}} , based on the linear mixing model: x i = A s i , {\displaystyle x_{i}=A\,s_{i},} where the A {\displaystyle A} is an m × m {\displaystyle m\times m} invertible matrix called the mixing matrix, s i {\displaystyle s_{i}} represents the m‑dimensional vector containing the values of the sources at time t i {\displaystyle t_{i}} , and x i {\displaystyle x_{i}} is the corresponding vector of observed values at time t i {\displaystyle t_{i}} . The goal is to estimate both A {\displaystyle A} and the source signals { s i } {\displaystyle \{s_{i}\}} solely from the observed data { x i } {\displaystyle \{x_{i}\}} . After centering, the Gram matrix is computed as: ( X ∗ ) T X ∗ = Q D Q T , {\displaystyle (X^{})^{T}X^{}=Q\,D\,Q^{T},} where D is a diagonal matrix with positive entries (assuming X ∗ {\displaystyle X^{}} has maximum rank), and Q is an orthogonal matrix. Writing the SVD of the mixing matrix A = U Σ V T {\displaystyle A=U\Sigma V^{T}} and comparing with A A T = U Σ 2 U T {\displaystyle AA^{T}=U\Sigma ^{2}U^{T}} the mixing A has the form A = Q D 1 / 2 V T . {\displaystyle A=Q\,D^{1/2}\,V^{T}.} So, the normalized source values satisfy s i ∗ = V y i ∗ {\displaystyle s_{i}^{}=V\,y_{i}^{}} , where y i ∗ = D − 1 2 Q T x i ∗ . {\displaystyle y_{i}^{}=D^{-{\tfrac {1}{2}}}Q^{T}x_{i}^{}.} Thus, ICA reduces

  Read more →
• 

  Elastic map

  Elastic maps provide a tool for nonlinear dimensionality reduction. By their construction, they are a system of elastic springs embedded in the data space. This system approximates a low-dimensional manifold. The elastic coefficients of this system allow the switch from completely unstructured k-means clustering (zero elasticity) to the estimators located closely to linear PCA manifolds (for high bending and low stretching modules). With some intermediate values of the elasticity coefficients, this system effectively approximates non-linear principal manifolds. This approach is based on a mechanical analogy between principal manifolds, that are passing through "the middle" of the data distribution, and elastic membranes and plates. The method was developed by A.N. Gorban, A.Y. Zinovyev and A.A. Pitenko in 1996–1998. == Energy of elastic map == Let S {\displaystyle {\mathcal {S}}} be a data set in a finite-dimensional Euclidean space. Elastic map is represented by a set of nodes w j {\displaystyle {\bf {w}}_{j}} in the same space. Each datapoint s ∈ S {\displaystyle s\in {\mathcal {S}}} has a host node, namely the closest node w j {\displaystyle {\bf {w}}_{j}} (if there are several closest nodes then one takes the node with the smallest number). The data set S {\displaystyle {\mathcal {S}}} is divided into classes K j = { s | w j is a host of s } {\displaystyle K_{j}=\{s\ |\ {\bf {w}}_{j}{\mbox{ is a host of }}s\}} . The approximation energy D is the distortion D = 1 2 ∑ j = 1 k ∑ s ∈ K j ‖ s − w j ‖ 2 {\displaystyle D={\frac {1}{2}}\sum _{j=1}^{k}\sum _{s\in K_{j}}\|s-{\bf {w}}_{j}\|^{2}} , which is the energy of the springs with unit elasticity which connect each data point with its host node. It is possible to apply weighting factors to the terms of this sum, for example to reflect the standard deviation of the probability density function of any subset of data points { s i } {\displaystyle \{s_{i}\}} . On the set of nodes an additional structure is defined. Some pairs of nodes, ( w i , w j ) {\displaystyle ({\bf {w}}_{i},{\bf {w}}_{j})} , are connected by elastic edges. Call this set of pairs E {\displaystyle E} . Some triplets of nodes, ( w i , w j , w k ) {\displaystyle ({\bf {w}}_{i},{\bf {w}}_{j},{\bf {w}}_{k})} , form bending ribs. Call this set of triplets G {\displaystyle G} . The stretching energy is U E = 1 2 λ ∑ ( w i , w j ) ∈ E ‖ w i − w j ‖ 2 {\displaystyle U_{E}={\frac {1}{2}}\lambda \sum _{({\bf {w}}_{i},{\bf {w}}_{j})\in E}\|{\bf {w}}_{i}-{\bf {w}}_{j}\|^{2}} , The bending energy is U G = 1 2 μ ∑ ( w i , w j , w k ) ∈ G ‖ w i − 2 w j + w k ‖ 2 {\displaystyle U_{G}={\frac {1}{2}}\mu \sum _{({\bf {w}}_{i},{\bf {w}}_{j},{\bf {w}}_{k})\in G}\|{\bf {w}}_{i}-2{\bf {w}}_{j}+{\bf {w}}_{k}\|^{2}} , where λ {\displaystyle \lambda } and μ {\displaystyle \mu } are the stretching and bending moduli respectively. The stretching energy is sometimes referred to as the membrane, while the bending energy is referred to as the thin plate term. For example, on the 2D rectangular grid the elastic edges are just vertical and horizontal edges (pairs of closest vertices) and the bending ribs are the vertical or horizontal triplets of consecutive (closest) vertices. The total energy of the elastic map is thus U = D + U E + U G . {\displaystyle U=D+U_{E}+U_{G}.} The position of the nodes { w j } {\displaystyle \{{\bf {w}}_{j}\}} is determined by the mechanical equilibrium of the elastic map, i.e. its location is such that it minimizes the total energy U {\displaystyle U} . == Expectation-maximization algorithm == For a given splitting of dataset S {\displaystyle {\mathcal {S}}} in classes K j {\displaystyle K_{j}} , minimization of the quadratic functional U {\displaystyle U} is a linear problem with the sparse matrix of coefficients. Therefore, similar to principal component analysis or k-means, a splitting method is used: For given { w j } {\displaystyle \{{\bf {w}}_{j}\}} find { K j } {\displaystyle \{K_{j}\}} ; For given { K j } {\displaystyle \{K_{j}\}} minimize U {\displaystyle U} and find { w j } {\displaystyle \{{\bf {w}}_{j}\}} ; If no change, terminate. This expectation-maximization algorithm guarantees a local minimum of U {\displaystyle U} . For improving the approximation various additional methods are proposed. For example, the softening strategy is used. This strategy starts with a rigid grids (small length, small bending and large elasticity modules λ {\displaystyle \lambda } and μ {\displaystyle \mu } coefficients) and finishes with soft grids (small λ {\displaystyle \lambda } and μ {\displaystyle \mu } ). The training goes in several epochs, each epoch with its own grid rigidness. Another adaptive strategy is growing net: one starts from a small number of nodes and gradually adds new nodes. Each epoch goes with its own number of nodes. == Applications == Most important applications of the method and free software are in bioinformatics for exploratory data analysis and visualisation of multidimensional data, for data visualisation in economics, social and political sciences, as an auxiliary tool for data mapping in geographic informational systems and for visualisation of data of various nature. The method is applied in quantitative biology for reconstructing the curved surface of a tree leaf from a stack of light microscopy images. This reconstruction is used for quantifying the geodesic distances between trichomes and their patterning, which is a marker of the capability of a plant to resist to pathogenes. Recently, the method is adapted as a support tool in the decision process underlying the selection, optimization, and management of financial portfolios. The method of elastic maps has been systematically tested and compared with several machine learning methods on the applied problem of identification of the flow regime of a gas-liquid flow in a pipe. There are various regimes: Single phase water or air flow, Bubbly flow, Bubbly-slug flow, Slug flow, Slug-churn flow, Churn flow, Churn-annular flow, and Annular flow. The simplest and most common method used to identify the flow regime is visual observation. This approach is, however, subjective and unsuitable for relatively high gas and liquid flow rates. Therefore, the machine learning methods are proposed by many authors. The methods are applied to differential pressure data collected during a calibration process. The method of elastic maps provided a 2D map, where the area of each regime is represented. The comparison with some other machine learning methods is presented in Table 1 for various pipe diameters and pressure. Here, ANN stands for the backpropagation artificial neural networks, SVM stands for the support vector machine, SOM for the self-organizing maps. The hybrid technology was developed for engineering applications. In this technology, elastic maps are used in combination with Principal Component Analysis (PCA), Independent Component Analysis (ICA) and backpropagation ANN. The textbook provides a systematic comparison of elastic maps and self-organizing maps (SOMs) in applications to economic and financial decision-making.

  Read more →
• 

  Open information extraction

  In natural language processing, open information extraction (OIE) is the task of generating a structured, machine-readable representation of the information in text, usually in the form of triples or n-ary propositions. == Overview == A proposition can be understood as truth-bearer, a textual expression of a potential fact (e.g., "Dante wrote the Divine Comedy"), represented in an amenable structure for computers [e.g., ("Dante", "wrote", "Divine Comedy")]. An OIE extraction normally consists of a relation and a set of arguments. For instance, ("Dante", "passed away in" "Ravenna") is a proposition formed by the relation "passed away in" and the arguments "Dante" and "Ravenna". The first argument is usually referred as the subject while the second is considered to be the object. The extraction is said to be a textual representation of a potential fact because its elements are not linked to a knowledge base. Furthermore, the factual nature of the proposition has not yet been established. In the above example, transforming the extraction into a full fledged fact would first require linking, if possible, the relation and the arguments to a knowledge base. Second, the truth of the extraction would need to be determined. In computer science transforming OIE extractions into ontological facts is known as relation extraction. In fact, OIE can be seen as the first step to a wide range of deeper text understanding tasks such as relation extraction, knowledge-base construction, question answering, semantic role labeling. The extracted propositions can also be directly used for end-user applications such as structured search (e.g., retrieve all propositions with "Dante" as subject). OIE was first introduced by TextRunner developed at the University of Washington Turing Center headed by Oren Etzioni. Other methods introduced later such as Reverb, OLLIE, ClausIE or CSD helped to shape the OIE task by characterizing some of its aspects. At a high level, all of these approaches make use of a set of patterns to generate the extractions. Depending on the particular approach, these patterns are either hand-crafted or learned. == OIE systems and contributions == Reverb suggested the necessity to produce meaningful relations to more accurately capture the information in the input text. For instance, given the sentence "Faust made a pact with the devil", it would be erroneous to just produce the extraction ("Faust", "made", "a pact") since it would not be adequately informative. A more precise extraction would be ("Faust", "made a pact with", "the devil"). Reverb also argued against the generation of overspecific relations. OLLIE stressed two important aspects for OIE. First, it pointed to the lack of factuality of the propositions. For instance, in a sentence like "If John studies hard, he will pass the exam", it would be inaccurate to consider ("John", "will pass", "the exam") as a fact. Additionally, the authors indicated that an OIE system should be able to extract non-verb mediated relations, which account for significant portion of the information expressed in natural language text. For instance, in the sentence "Obama, the former US president, was born in Hawaii", an OIE system should be able to recognize a proposition ("Obama", "is", "former US president"). ClausIE introduced the connection between grammatical clauses, propositions, and OIE extractions. The authors stated that as each grammatical clause expresses a proposition, each verb mediated proposition can be identified by solely recognizing the set of clauses expressed in each sentence. This implies that to correctly recognize the set of propositions in an input sentence, it is necessary to understand its grammatical structure. The authors studied the case in the English language that only admits seven clause types, meaning that the identification of each proposition only requires defining seven grammatical patterns. The finding also established a separation between the recognition of the propositions and its materialization. In a first step, the proposition can be identified without any consideration of its final form, in a domain-independent and unsupervised way, mostly based on linguistic principles. In a second step, the information can be represented according to the requirements of the underlying application, without conditioning the identification phase. Consider the sentence "Albert Einstein was born in Ulm and died in Princeton". The first step will recognize the two propositions ("Albert Einstein", "was born", "in Ulm") and ("Albert Einstein", "died", "in Princeton"). Once the information has been correctly identified, the propositions can take the particular form required by the underlying application [e.g., ("Albert Einstein", "was born in", "Ulm") and ("Albert Einstein", "died in", "Princeton")]. CSD introduced the idea of minimality in OIE. It considers that computers can make better use of the extractions if they are expressed in a compact way. This is especially important in sentences with subordinate clauses. In these cases, CSD suggests the generation of nested extractions. For example, consider the sentence "The Embassy said that 6,700 Americans were in Pakistan". CSD generates two extractions [i] ("6,700 Americans", "were", "in Pakistan") and [ii] ("The Embassy", "said", "that [i]"). This is usually known as reification.

  Read more →
• 

  Mixture model

  In statistics, a mixture model is a probabilistic model for representing the presence of subpopulations within an overall population, without requiring that an observed data set should identify the sub-population to which an individual observation belongs. Formally a mixture model corresponds to the mixture distribution that represents the probability distribution of observations in the overall population. However, while problems associated with "mixture distributions" relate to deriving the properties of the overall population from those of the sub-populations, "mixture models" are used to make statistical inferences about the properties of the sub-populations given only observations on the pooled population, without sub-population identity information. Mixture models are used for clustering, under the name model-based clustering, and also for density estimation. Mixture models should not be confused with models for compositional data, i.e., data whose components are constrained to sum to a constant value (1, 100%, etc.). However, compositional models can be thought of as mixture models, where members of the population are sampled at random. Conversely, mixture models can be thought of as compositional models, where the total size reading population has been normalized to 1. == Structure == === General mixture model === A typical finite-dimensional mixture model is a hierarchical model consisting of the following components: N random variables that are observed, each distributed according to a mixture of K components, with the components belonging to the same parametric family of distributions (e.g., all normal, all Zipfian, etc.) but with different parameters. However, it is also possible to have a finite mixture model where each component belongs to a different parametric family of distributions, for example, a mixture of a multivariate normal distribution and a generalized hyperbolic distribution. N random latent variables specifying the identity of the mixture component of each observation, each distributed according to a K-dimensional categorical distribution A set of K mixture weights, which are probabilities that sum to 1. A set of K parameters, each specifying the parameter of the corresponding mixture component. In many cases, each "parameter" is actually a set of parameters. For example, if the mixture components are Gaussian distributions, there will be a mean and variance for each component. If the mixture components are categorical distributions (e.g., when each observation is a token from a finite alphabet of size V), there will be a vector of V probabilities summing to 1. In addition, in a Bayesian setting, the mixture weights and parameters will themselves be random variables, and prior distributions will be placed over the variables. In such a case, the weights are typically viewed as a K-dimensional random vector drawn from a Dirichlet distribution (the conjugate prior of the categorical distribution), and the parameters will be distributed according to their respective conjugate priors. Mathematically, a basic parametric mixture model can be described as follows: K = number of mixture components N = number of observations θ i = 1 … K = parameter of distribution of observation associated with component i ϕ i = 1 … K = mixture weight, i.e., prior probability of a particular component i ϕ = K -dimensional vector composed of all the individual ϕ 1 … K ; must sum to 1 z i = 1 … N = component of observation i x i = 1 … N = observation i F ( x | θ ) = probability distribution of an observation, parametrized on θ z i = 1 … N ∼ Categorical ⁡ ( ϕ ) x i = 1 … N | z i = 1 … N ∼ F ( θ z i ) {\displaystyle {\begin{array}{lcl}K&=&{\text{number of mixture components}}\\N&=&{\text{number of observations}}\\\theta _{i=1\dots K}&=&{\text{parameter of distribution of observation associated with component }}i\\\phi _{i=1\dots K}&=&{\text{mixture weight, i.e., prior probability of a particular component }}i\\{\boldsymbol {\phi }}&=&K{\text{-dimensional vector composed of all the individual }}\phi _{1\dots K}{\text{; must sum to 1}}\\z_{i=1\dots N}&=&{\text{component of observation }}i\\x_{i=1\dots N}&=&{\text{observation }}i\\F(x|\theta )&=&{\text{probability distribution of an observation, parametrized on }}\theta \\z_{i=1\dots N}&\sim &\operatorname {Categorical} ({\boldsymbol {\phi }})\\x_{i=1\dots N}|z_{i=1\dots N}&\sim &F(\theta _{z_{i}})\end{array}}} In a Bayesian setting, all parameters are associated with random variables, as follows: K , N = as above θ i = 1 … K , ϕ i = 1 … K , ϕ = as above z i = 1 … N , x i = 1 … N , F ( x | θ ) = as above α = shared hyperparameter for component parameters β = shared hyperparameter for mixture weights H ( θ | α ) = prior probability distribution of component parameters, parametrized on α θ i = 1 … K ∼ H ( θ | α ) ϕ ∼ S y m m e t r i c - D i r i c h l e t K ⁡ ( β ) z i = 1 … N | ϕ ∼ Categorical ⁡ ( ϕ ) x i = 1 … N | z i = 1 … N , θ i = 1 … K ∼ F ( θ z i ) {\displaystyle {\begin{array}{lcl}K,N&=&{\text{as above}}\\\theta _{i=1\dots K},\phi _{i=1\dots K},{\boldsymbol {\phi }}&=&{\text{as above}}\\z_{i=1\dots N},x_{i=1\dots N},F(x|\theta )&=&{\text{as above}}\\\alpha &=&{\text{shared hyperparameter for component parameters}}\\\beta &=&{\text{shared hyperparameter for mixture weights}}\\H(\theta |\alpha )&=&{\text{prior probability distribution of component parameters, parametrized on }}\alpha \\\theta _{i=1\dots K}&\sim &H(\theta |\alpha )\\{\boldsymbol {\phi }}&\sim &\operatorname {Symmetric-Dirichlet} _{K}(\beta )\\z_{i=1\dots N}|{\boldsymbol {\phi }}&\sim &\operatorname {Categorical} ({\boldsymbol {\phi }})\\x_{i=1\dots N}|z_{i=1\dots N},\theta _{i=1\dots K}&\sim &F(\theta _{z_{i}})\end{array}}} This characterization uses F and H to describe arbitrary distributions over observations and parameters, respectively. Typically H will be the conjugate prior of F. The two most common choices of F are Gaussian aka "normal" (for real-valued observations) and categorical (for discrete observations). Other common possibilities for the distribution of the mixture components are: Binomial distribution, for the number of "positive occurrences" (e.g., successes, yes votes, etc.) given a fixed number of total occurrences Multinomial distribution, similar to the binomial distribution, but for counts of multi-way occurrences (e.g., yes/no/maybe in a survey) Negative binomial distribution, for binomial-type observations but where the quantity of interest is the number of failures before a given number of successes occurs Poisson distribution, for the number of occurrences of an event in a given period of time, for an event that is characterized by a fixed rate of occurrence Exponential distribution, for the time before the next event occurs, for an event that is characterized by a fixed rate of occurrence Log-normal distribution, for positive real numbers that are assumed to grow exponentially, such as incomes or prices Multivariate normal distribution (aka multivariate Gaussian distribution), for vectors of correlated outcomes that are individually Gaussian-distributed Multivariate Student's t-distribution, for vectors of heavy-tailed correlated outcomes A vector of Bernoulli-distributed values, corresponding, e.g., to a black-and-white image, with each value representing a pixel; see the handwriting-recognition example below === Specific examples === ==== Gaussian mixture model ==== A typical non-Bayesian Gaussian mixture model looks like this: K , N = as above ϕ i = 1 … K , ϕ = as above z i = 1 … N , x i = 1 … N = as above θ i = 1 … K = { μ i = 1 … K , σ i = 1 … K 2 } μ i = 1 … K = mean of component i σ i = 1 … K 2 = variance of component i z i = 1 … N ∼ Categorical ⁡ ( ϕ ) x i = 1 … N ∼ N ( μ z i , σ z i 2 ) {\displaystyle {\begin{array}{lcl}K,N&=&{\text{as above}}\\\phi _{i=1\dots K},{\boldsymbol {\phi }}&=&{\text{as above}}\\z_{i=1\dots N},x_{i=1\dots N}&=&{\text{as above}}\\\theta _{i=1\dots K}&=&\{\mu _{i=1\dots K},\sigma _{i=1\dots K}^{2}\}\\\mu _{i=1\dots K}&=&{\text{mean of component }}i\\\sigma _{i=1\dots K}^{2}&=&{\text{variance of component }}i\\z_{i=1\dots N}&\sim &\operatorname {Categorical} ({\boldsymbol {\phi }})\\x_{i=1\dots N}&\sim &{\mathcal {N}}(\mu _{z_{i}},\sigma _{z_{i}}^{2})\end{array}}} A Bayesian version of a Gaussian mixture model is as follows: K , N = as above ϕ i = 1 … K , ϕ = as above z i = 1 … N , x i = 1 … N = as above θ i = 1 … K = { μ i = 1 … K , σ i = 1 … K 2 } μ i = 1 … K = mean of component i σ i = 1 … K 2 = variance of component i μ 0 , λ , ν , σ 0 2 = shared hyperparameters μ i = 1 … K ∼ N ( μ 0 , λ σ i 2 ) σ i = 1 … K 2 ∼ I n v e r s e - G a m m a ⁡ ( ν , σ 0 2 ) ϕ ∼ S y m m e t r i c - D i r i c h l e t K ⁡ ( β ) z i = 1 … N ∼ Categorical ⁡ ( ϕ ) x i = 1 … N ∼ N ( μ z i , σ z i 2 ) {\displaystyle {\begin{array}{lcl}K,N&=&{\text{as above}}\\\phi _{i=1\dots K},{\boldsymbol {\phi }}&=&{\text{as above}}\\z_{i=1\dots N},x_{i=1\dots N}&=&{\text{as above}}\\\theta _{i=1\

  Read more →
• 

  Ensemble learning

  In statistics and machine learning, ensemble methods use multiple learning algorithms to obtain better predictive performance than could be obtained from any of the constituent learning algorithms alone. Unlike a statistical ensemble in statistical mechanics, which is usually infinite, a machine learning ensemble consists of only a concrete finite set of alternative models, but typically allows for much more flexible structure to exist among those alternatives. == Overview == Supervised learning algorithms search through a hypothesis space to find a suitable hypothesis that will make good predictions with a particular problem. Even if this space contains hypotheses that are very well-suited for a particular problem, it may be very difficult to find a good one. Ensembles combine multiple hypotheses to form one which should be theoretically better. Ensemble learning trains two or more machine learning algorithms on a specific classification or regression task. The algorithms within the ensemble model are generally referred as "base models", "base learners", or "weak learners" in literature. These base models can be constructed using a single modelling algorithm, or several different algorithms. The idea is to train a diverse set of weak models on the same modelling task, such that the outputs of each weak learner have poor predictive ability (i.e., high bias), and among all weak learners, the outcome and error values exhibit high variance. Fundamentally, an ensemble learning model trains at least two high-bias (weak) and high-variance (diverse) models to be combined into a better-performing model. The set of weak models — which would not produce satisfactory predictive results individually — are combined or averaged to produce a single, high performing, accurate, and low-variance model to fit the task as required. Ensemble learning typically refers to bagging (bootstrap aggregating), boosting or stacking/blending techniques to induce high variance among the base models. Bagging creates diversity by generating random samples from the training observations and fitting the same model to each different sample — also known as homogeneous parallel ensembles. Boosting follows an iterative process by sequentially training each base model on the up-weighted errors of the previous base model, producing an additive model to reduce the final model errors — also known as sequential ensemble learning. Stacking or blending consists of different base models, each trained independently (i.e. diverse/high variance) to be combined into the ensemble model — producing a heterogeneous parallel ensemble. Common applications of ensemble learning include random forests (an extension of bagging), Boosted Tree models, and Gradient Boosted Tree Models. Models in applications of stacking are generally more task-specific — such as combining clustering techniques with other parametric and/or non-parametric techniques. Evaluating the prediction of an ensemble typically requires more computation than evaluating the prediction of a single model. In one sense, ensemble learning may be thought of as a way to compensate for poor learning algorithms by performing a lot of extra computation. On the other hand, the alternative is to do a lot more learning with one non-ensemble model. An ensemble may be more efficient at improving overall accuracy for the same increase in compute, storage, or communication resources by using that increase on two or more methods, than would have been improved by increasing resource use for a single method. Fast algorithms such as decision trees are commonly used in ensemble methods (e.g., random forests), although slower algorithms can benefit from ensemble techniques as well. By analogy, ensemble techniques have been used also in unsupervised learning scenarios, for example in consensus clustering or in anomaly detection. == Ensemble theory == Empirically, ensembles tend to yield better results when there is a significant diversity among the models. Many ensemble methods, therefore, seek to promote diversity among the models they combine. Although perhaps non-intuitive, more random algorithms (like random decision trees) can be used to produce a stronger ensemble than very deliberate algorithms (like entropy-reducing decision trees). Using a variety of strong learning algorithms, however, has been shown to be more effective than using techniques that attempt to dumb-down the models in order to promote diversity. It is possible to increase diversity in the training stage of the model using correlation for regression tasks or using information measures such as cross entropy for classification tasks. Theoretically, one can justify the diversity concept because the lower bound of the error rate of an ensemble system can be decomposed into accuracy, diversity, and the other term. === The geometric framework === Ensemble learning, including both regression and classification tasks, can be explained using a geometric framework. Within this framework, the output of each individual classifier or regressor for the entire dataset can be viewed as a point in a multi-dimensional space. Additionally, the target result is also represented as a point in this space, referred to as the "ideal point." The Euclidean distance is used as the metric to measure both the performance of a single classifier or regressor (the distance between its point and the ideal point) and the dissimilarity between two classifiers or regressors (the distance between their respective points). This perspective transforms ensemble learning into a deterministic problem. For example, within this geometric framework, it can be proved that the averaging of the outputs (scores) of all base classifiers or regressors can lead to equal or better results than the average of all the individual models. It can also be proved that if the optimal weighting scheme is used, then a weighted averaging approach can outperform any of the individual classifiers or regressors that make up the ensemble or as good as the best performer at least. == Ensemble size == While the number of component classifiers of an ensemble has a great impact on the accuracy of prediction, there is a limited number of studies addressing this problem. A priori determining of ensemble size and the volume and velocity of big data streams make this even more crucial for online ensemble classifiers. Mostly statistical tests were used for determining the proper number of components. More recently, a theoretical framework suggested that there is an ideal number of component classifiers for an ensemble such that having more or less than this number of classifiers would deteriorate the accuracy. It is called "the law of diminishing returns in ensemble construction." Their theoretical framework shows that using the same number of independent component classifiers as class labels gives the highest accuracy. == Common types of ensembles == === Bayes optimal classifier === The Bayes optimal classifier is a classification technique. It is an ensemble of all the hypotheses in the hypothesis space. On average, no other ensemble can outperform it. The Naive Bayes classifier is a version of this that assumes that the data is conditionally independent on the class and makes the computation more feasible. Each hypothesis is given a vote proportional to the likelihood that the training dataset would be sampled from a system if that hypothesis were true. To facilitate training data of finite size, the vote of each hypothesis is also multiplied by the prior probability of that hypothesis. The Bayes optimal classifier can be expressed with the following equation: y = a r g m a x c j ∈ C ∑ h i ∈ H P ( c j | h i ) P ( T | h i ) P ( h i ) {\displaystyle y={\underset {c_{j}\in C}{\mathrm {argmax} }}\sum _{h_{i}\in H}{P(c_{j}|h_{i})P(T|h_{i})P(h_{i})}} where y {\displaystyle y} is the predicted class, C {\displaystyle C} is the set of all possible classes, H {\displaystyle H} is the hypothesis space, P {\displaystyle P} refers to a probability, and T {\displaystyle T} is the training data. As an ensemble, the Bayes optimal classifier represents a hypothesis that is not necessarily in H {\displaystyle H} . The hypothesis represented by the Bayes optimal classifier, however, is the optimal hypothesis in ensemble space (the space of all possible ensembles consisting only of hypotheses in H {\displaystyle H} ). This formula can be restated using Bayes' theorem, which says that the posterior is proportional to the likelihood times the prior: P ( h i | T ) ∝ P ( T | h i ) P ( h i ) {\displaystyle P(h_{i}|T)\propto P(T|h_{i})P(h_{i})} hence, y = a r g m a x c j ∈ C ∑ h i ∈ H P ( c j | h i ) P ( h i | T ) {\displaystyle y={\underset {c_{j}\in C}{\mathrm {argmax} }}\sum _{h_{i}\in H}{P(c_{j}|h_{i})P(h_{i}|T)}} === Bootstrap aggregating (bagging) === Bootstrap aggregation (bagging) involves training an ensemble on bootstrapped data sets. A bootstrapped set is cr

  Read more →
• 

  Ilastik

  ilastik is free open source software for image classification and segmentation. No previous experience in image processing is required to run the software. Since 2018 ilastik is further developed and maintained by Anna Kreshuk's group at European Molecular Biology Laboratory. == Features == ilastik allows user to annotate an arbitrary number of classes in images with a mouse interface. Using these user annotations and the generic (nonlinear) image features, the user can train a random forest classifier. Trained ilastik classifiers can be applied new data not included in the training set in ilastik via its batch processing functionality, or without using the graphical user interface, in headless mode. ilastik can be integrated into various related tools: Pre-trained workflows can be executed directly from ImageJ/Fiji using the ilastik-ImageJ plugin. Pre-trained ilastik Pixel Classification workflows can be run directly in Python with the ilastik Python package, which is available via conda. ilastik has a CellProfiler module to use ilastik classifiers to process images within a CellProfiler framework. == History == ilastik was first released in 2011 by scientists at the Heidelberg Collaboratory for Image Processing (HCI), University of Heidelberg. == Application == The Interactive Learning and Segmentation Toolkit Carving Cell classification and neuron classification Synapse detection Cell tracking Neural Network Classification == Resources == ilastik project is hosted on GitHub. It is a collaborative project, any contributions such as comments, bug reports, bug fixes or code contributions are welcome. The ilastik team can be contacted for user support on the image.sc forum.

  Read more →
• 

  Backend as a service

  Backend as a service (BaaS), sometimes also referred to as mobile backend as a service (MBaaS), is a service for providing web app and mobile app developers with a way to easily build a backend to their frontend applications. Features available include user management, push notifications, and integration with social networking services. These services are provided via the use of custom software development kits (SDKs) and application programming interfaces (APIs). BaaS is a relatively recent development in cloud computing, with most BaaS startups dating from 2011 or later. Some of the most popular service providers are AWS Amplify and Firebase. == Purpose == Web and mobile apps require a similar set of features on the backend, including notification service, integration with social networks, and cloud storage. Each of these services has its own API that must be individually incorporated into an app, a process that can be time-consuming and complicated for app developers. BaaS providers form a bridge between the frontend of an application and various cloud-based backends via a unified API and SDK. Providing a consistent way to manage backend data means that developers do not need to redevelop their own backend for each of the services that their apps need to access, potentially saving both time and money. Although similar to other cloud-computing business models, such as serverless computing, software as a service (SaaS), infrastructure as a service (IaaS), and platform as a service (PaaS), BaaS is distinct from these other services in that it specifically addresses the cloud-computing needs of web and mobile app developers by providing a unified means of connecting their apps to cloud services. == Features == BaaS providers offer different set of features and backend tools. Some of the most common features include: Database management. Most BaaS solutions provide SQL and/or NoSQL database management services for applications. Developers can store their app data without deploying and managing databases themselves. BaaS usually provides client SDKs, REST and GraphQL APIs for the frontend to interact with databases. File storage. BaaS providers often offer storage solutions for media files, user uploads, and other binary data. Applications can upload, download, and delete files through provided SDKs and APIs. Authentication and authorization. Some BaaS offer authentication and authorization services that allow developers to easily manage app users. This includes user sign-up, login, password reset, social media login integration through OAuth, user group and permission management etc. Notification service. Some BaaS providers such as Firebase and AWS Amplify have notification services that can send custom emails to users and push native notifications on mobile platforms. This is especially useful for applications that need to send messages, alerts, and reminders. Cloud functions. Some BaaS allow developers to deploy and run serverless functions. The functions are usually stateless and can be triggered by various ways including HTTP requests, SDK invocation, background server events, and cloud scheduled executions. Different providers offer runtime support for different languages, some of the popular languages are JavaScript/TypeScript (Node.js, Deno), Python, Java/Kotlin. Cloud functions extend the potential and flexibility of BaaS by allowing developers to write custom functionalities for their apps, working in a way similar to a traditional REST API backend framework. Usage analytics. Analytics data about application usage is often included in BaaS. This allows developers to monitor user behaviors and make decisions correspondingly in marketing strategies and performance optimizations. UI design. Some BaaS providers, such as AWS Amplify and Backendless, offer user interface designing tools that help developers design the frontend UI of web and mobile apps. While this may be useful for small teams and individual developers, UI design assistance may not be conventional in BaaS as it goes beyond the scope of backend infrastructure. Real-Time. Real-time features in a BaaS platform ensure that data updates and synchronizations occur instantly across all clients, making changes immediately visible to users. This is crucial for applications like live chat and collaborative tools, using technologies like WebSockets to maintain continuous server-client connections. == Service providers == BaaS providers have a broad focus, providing SDKs and APIs that work for app development on multiple platforms with different technology stacks, such as JavaScript (for Web apps), Flutter, Java/Kotlin (for Android apps), Swift/Objective-C (for iOS/MacOS/WatchOS/TvOS apps), .NET (for Windows) and others. BaaS providers also come in different types, suiting developers of different needs. === Cloud-based BaaS === Most BaaS providers host backend platforms on their cloud servers. They also manage the infrastructure, security, and scalability of the platforms. Developers can access the backend services via a web interface or the provided APIs. Some examples of cloud-based BaaS include Firebase (hosted on Google Cloud Platform), AWS Amplify (hosted on Amazon Web Services), and Microsoft Azure Mobile Apps (hosted on Microsoft Azure). === Self-hosted BaaS === Self-hosted BaaS allow developers to host backend on their own servers, providing more flexibility and potential to customization compared to cloud-based BaaS, which often is more difficult to migrate from. However, developers are also in charge of managing the infrastructure, security, and scalability of their servers. === Mobile BaaS === Mobile backend as a service (MBaaS) is a type of BaaS specifically for applications deployed in mobile systems. While some references use MBaaS interchangeably for BaaS, BaaS can have a wider variety of support such as for web apps and desktop apps. == Business model == BaaS providers generate revenue from their services in various ways, often using a freemium model. Under this model, a client receives a certain number of free active users or API calls per month, and pays a fee for each user or call over this limit. Alternatively, clients can pay a set fee for a package which allows for a greater number of calls or active users per month. There are also flat fee plans that make the pricing more predictable. Some of the providers offer the unlimited API calls inside their free plan offerings. Another business model that has been used by a lot of BaaS providers is PAYG (pay as you go), which has a flexible cost based on developers' usage of database, storage, bandwidth, function calls, user numbers etc.

  Read more →
• 

  Synaptic weight

  In neuroscience and computer science, synaptic weight refers to the strength or amplitude of a connection between two nodes, corresponding in biology to the amount of influence the firing of one neuron has on another. The term is typically used in artificial and biological neural network research. == Computation == In a computational neural network, a vector or set of inputs x {\displaystyle {\textbf {x}}} and outputs y {\displaystyle {\textbf {y}}} , or pre- and post-synaptic neurons respectively, are interconnected with synaptic weights represented by the matrix w {\displaystyle w} , where for a linear neuron y j = ∑ i w i j x i or y = w x {\displaystyle y_{j}=\sum _{i}w_{ij}x_{i}~~{\textrm {or}}~~{\textbf {y}}=w{\textbf {x}}} . where the rows of the synaptic matrix represent the vector of synaptic weights for the output indexed by j {\displaystyle j} . The synaptic weight is changed by using a learning rule, the most basic of which is Hebb's rule, which is usually stated in biological terms as Neurons that fire together, wire together. Computationally, this means that if a large signal from one of the input neurons results in a large signal from one of the output neurons, then the synaptic weight between those two neurons will increase. The rule is unstable, however, and is typically modified using such variations as Oja's rule, radial basis functions or the backpropagation algorithm. == Biology == For biological networks, the effect of synaptic weights is not as simple as for linear neurons or Hebbian learning. However, biophysical models such as BCM theory have seen some success in mathematically describing these networks. In the mammalian central nervous system, signal transmission is carried out by interconnected networks of nerve cells, or neurons. For the basic pyramidal neuron, the input signal is carried by the axon, which releases neurotransmitter chemicals into the synapse which is picked up by the dendrites of the next neuron, which can then generate an action potential which is analogous to the output signal in the computational case. The synaptic weight in this process is determined by several variable factors: How well the input signal propagates through the axon (see myelination), The amount of neurotransmitter released into the synapse and the amount that can be absorbed in the following cell (determined by the number of AMPA and NMDA receptors on the cell membrane and the amount of intracellular calcium and other ions), The number of such connections made by the axon to the dendrites, How well the signal propagates and integrates in the postsynaptic cell. The changes in synaptic weight that occur is known as synaptic plasticity, and the process behind long-term changes (long-term potentiation and depression) is still poorly understood. Hebb's original learning rule was originally applied to biological systems, but has had to undergo many modifications as a number of theoretical and experimental problems came to light.

  Read more →
• 

  Latent Dirichlet allocation

  In natural language processing, latent Dirichlet allocation (LDA) is a generative statistical model that explains how a collection of text documents can be described by a set of unobserved "topics." For example, given a set of news articles, LDA might discover that one topic is characterized by words like "president", "government", and "election", while another is characterized by "team", "game", and "score". It is one of the most common topic models. The LDA model was first presented as a graphical model for population genetics by J. K. Pritchard, M. Stephens and P. Donnelly in 2000. The model was subsequently applied to machine learning by David Blei, Andrew Ng, and Michael I. Jordan in 2003. Although its most frequent application is in modeling text corpora, it has also been used for other problems, such as in clinical psychology, social science, and computational musicology. The core assumption of LDA is that documents are represented as a random mixture of latent topics, and each topic is characterized by a probability distribution over words. The model is a generalization of probabilistic latent semantic analysis (pLSA), differing primarily in that LDA treats the topic mixture as a Dirichlet prior, leading to more reasonable mixtures and less susceptibility to overfitting. Learning the latent topics and their associated probabilities from a corpus is typically done using Bayesian inference, often with methods like Gibbs sampling or variational Bayes. == History == In the context of population genetics, LDA was proposed by J. K. Pritchard, M. Stephens and P. Donnelly in 2000. LDA was applied in machine learning by David Blei, Andrew Ng and Michael I. Jordan in 2003. == Overview == === Population genetics === In population genetics, the model is used to detect the presence of structured genetic variation in a group of individuals. The model assumes that alleles carried by individuals under study have origin in various extant or past populations. The model and various inference algorithms allow scientists to estimate the allele frequencies in those source populations and the origin of alleles carried by individuals under study. The source populations can be interpreted ex-post in terms of various evolutionary scenarios. In association studies, detecting the presence of genetic structure is considered a necessary preliminary step to avoid confounding. === Clinical psychology, mental health, and social science === In clinical psychology research, LDA has been used to identify common themes of self-images experienced by young people in social situations. Other social scientists have used LDA to examine large sets of topical data from discussions on social media (e.g., tweets about prescription drugs). Additionally, supervised Latent Dirichlet Allocation with covariates (SLDAX) has been specifically developed to combine latent topics identified in texts with other manifest variables. This approach allows for the integration of text data as predictors in statistical regression analyses, improving the accuracy of mental health predictions. One of the main advantages of SLDAX over traditional two-stage approaches is its ability to avoid biased estimates and incorrect standard errors, allowing for a more accurate analysis of psychological texts. In the field of social sciences, LDA has proven to be useful for analyzing large datasets, such as social media discussions. For instance, researchers have used LDA to investigate tweets discussing socially relevant topics, like the use of prescription drugs and cultural differences in China. By analyzing these large text corpora, it is possible to uncover patterns and themes that might otherwise go unnoticed, offering valuable insights into public discourse and perception in real time. === Musicology === In the context of computational musicology, LDA has been used to discover tonal structures in different corpora. === Machine learning === One application of LDA in machine learning – specifically, topic discovery, a subproblem in natural language processing – is to discover topics in a collection of documents, and then automatically classify any individual document within the collection in terms of how "relevant" it is to each of the discovered topics. A topic is considered to be a set of terms (i.e., individual words or phrases) that, taken together, suggest a shared theme. For example, in a document collection related to pet animals, the terms dog, spaniel, beagle, golden retriever, puppy, bark, and woof would suggest a DOG_related theme, while the terms cat, siamese, Maine coon, tabby, manx, meow, purr, and kitten would suggest a CAT_related theme. There may be many more topics in the collection – e.g., related to diet, grooming, healthcare, behavior, etc. that we do not discuss for simplicity's sake. (Very common, so called stop words in a language – e.g., "the", "an", "that", "are", "is", etc., – would not discriminate between topics and are usually filtered out by pre-processing before LDA is performed. Pre-processing also converts terms to their "root" lexical forms – e.g., "barks", "barking", and "barked" would be converted to "bark".) If the document collection is sufficiently large, LDA will discover such sets of terms (i.e., topics) based upon the co-occurrence of individual terms, though the task of assigning a meaningful label to an individual topic (i.e., that all the terms are DOG_related) is up to the user, and often requires specialized knowledge (e.g., for collection of technical documents). The LDA approach assumes that: The semantic content of a document is composed by combining one or more terms from one or more topics. Certain terms are ambiguous, belonging to more than one topic, with different probability. (For example, the term training can apply to both dogs and cats, but are more likely to refer to dogs, which are used as work animals or participate in obedience or skill competitions.) However, in a document, the accompanying presence of specific neighboring terms (which belong to only one topic) will disambiguate their usage. Most documents will contain only a relatively small number of topics. In the collection, e.g., individual topics will occur with differing frequencies. That is, they have a probability distribution, so that a given document is more likely to contain some topics than others. Within a topic, certain terms will be used much more frequently than others. In other words, the terms within a topic will also have their own probability distribution. When LDA machine learning is employed, both sets of probabilities are computed during the training phase, using Bayesian methods and an expectation–maximization algorithm. LDA is a generalization of older approach of probabilistic latent semantic analysis (pLSA), The pLSA model is equivalent to LDA under a uniform Dirichlet prior distribution. pLSA relies on only the first two assumptions above and does not care about the remainder. While both methods are similar in principle and require the user to specify the number of topics to be discovered before the start of training (as with k-means clustering) LDA has the following advantages over pLSA: LDA yields better disambiguation of words and a more precise assignment of documents to topics. Computing probabilities allows a "generative" process by which a collection of new "synthetic documents" can be generated that would closely reflect the statistical characteristics of the original collection. Unlike LDA, pLSA is vulnerable to overfitting especially when the size of corpus increases. The LDA algorithm is more readily amenable to scaling up for large data sets using the MapReduce approach on a computing cluster. == Model == With plate notation, which is often used to represent probabilistic graphical models (PGMs), the dependencies among the many variables can be captured concisely. The boxes are "plates" representing replicates, which are repeated entities. The outer plate represents documents, while the inner plate represents the repeated word positions in a given document; each position is associated with a choice of topic and word. The variable names are defined as follows: M denotes the number of documents N is number of words in a given document (document i has N i {\displaystyle N_{i}} words) α is the parameter of the Dirichlet prior on the per-document topic distributions β is the parameter of the Dirichlet prior on the per-topic word distribution θ i {\displaystyle \theta _{i}} is the topic distribution for document i φ k {\displaystyle \varphi _{k}} is the word distribution for topic k z i j {\displaystyle z_{ij}} is the topic for the j-th word in document i w i j {\displaystyle w_{ij}} is the specific word. The fact that W is grayed out means that words w i j {\displaystyle w_{ij}} are the only observable variables, and the other variables are latent variables. As proposed in the original paper, a sparse Dirichlet prior can be used to model the to

  Read more →