AI Face Generator From Photo Free

AI Face Generator From Photo Free — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

  • Neural network Gaussian process

    Neural network Gaussian process

    A Neural Network Gaussian Process (NNGP) is a Gaussian process (GP) obtained as the limit of a certain type of sequence of neural networks. Specifically, a wide variety of network architectures converges to a GP in the infinitely wide limit, in the sense of distribution. The concept constitutes an intensional definition, i.e., a NNGP is just a GP, but distinguished by how it is obtained. == Motivation == Bayesian networks are a modeling tool for assigning probabilities to events, and thereby characterizing the uncertainty in a model's predictions. Deep learning and artificial neural networks are approaches used in machine learning to build computational models which learn from training examples. Bayesian neural networks merge these fields. They are a type of neural network whose parameters and predictions are both probabilistic. While standard neural networks often assign high confidence even to incorrect predictions, Bayesian neural networks can more accurately evaluate how likely their predictions are to be correct. Computation in artificial neural networks is usually organized into sequential layers of artificial neurons. The number of neurons in a layer is called the layer width. When we consider a sequence of Bayesian neural networks with increasingly wide layers (see figure), they converge in distribution to a NNGP. This large width limit is of practical interest, since the networks often improve as layers get wider. And the process may give a closed form way to evaluate networks. NNGPs also appears in several other contexts: It describes the distribution over predictions made by wide non-Bayesian artificial neural networks after random initialization of their parameters, but before training; it appears as a term in neural tangent kernel prediction equations; it is used in deep information propagation to characterize whether hyperparameters and architectures will be trainable. It is related to other large width limits of neural networks. === Scope === The first correspondence result had been established in the 1995 PhD thesis of Radford M. Neal, then supervised by Geoffrey Hinton at University of Toronto. Neal cites David J. C. MacKay as inspiration, who worked in Bayesian learning. Today the correspondence is proven for: Single hidden layer Bayesian neural networks; deep fully connected networks as the number of units per layer is taken to infinity; convolutional neural networks as the number of channels is taken to infinity; transformer networks as the number of attention heads is taken to infinity; recurrent networks as the number of units is taken to infinity. In fact, this NNGP correspondence holds for almost any architecture: Generally, if an architecture can be expressed solely via matrix multiplication and coordinatewise nonlinearities (i.e., a tensor program), then it has an infinite-width GP. This in particular includes all feedforward or recurrent neural networks composed of multilayer perceptron, recurrent neural networks (e.g., LSTMs, GRUs), (nD or graph) convolution, pooling, skip connection, attention, batch normalization, and/or layer normalization. === Illustration === Every setting of a neural network's parameters θ {\displaystyle \theta } corresponds to a specific function computed by the neural network. A prior distribution p ( θ ) {\displaystyle p(\theta )} over neural network parameters therefore corresponds to a prior distribution over functions computed by the network. As neural networks are made infinitely wide, this distribution over functions converges to a Gaussian process for many architectures. The notation used in this section is the same as the notation used below to derive the correspondence between NNGPs and fully connected networks, and more details can be found there. The figure to the right plots the one-dimensional outputs z L ( ⋅ ; θ ) {\displaystyle z^{L}(\cdot ;\theta )} of a neural network for two inputs x {\displaystyle x} and x ∗ {\displaystyle x^{}} against each other. The black dots show the function computed by the neural network on these inputs for random draws of the parameters from p ( θ ) {\displaystyle p(\theta )} . The red lines are iso-probability contours for the joint distribution over network outputs z L ( x ; θ ) {\displaystyle z^{L}(x;\theta )} and z L ( x ∗ ; θ ) {\displaystyle z^{L}(x^{};\theta )} induced by p ( θ ) {\displaystyle p(\theta )} . This is the distribution in function space corresponding to the distribution p ( θ ) {\displaystyle p(\theta )} in parameter space, and the black dots are samples from this distribution. For infinitely wide neural networks, since the distribution over functions computed by the neural network is a Gaussian process, the joint distribution over network outputs is a multivariate Gaussian for any finite set of network inputs. == Discussion == === Infinitely wide fully connected network === This section expands on the correspondence between infinitely wide neural networks and Gaussian processes for the specific case of a fully connected architecture. It provides a proof sketch outlining why the correspondence holds, and introduces the specific functional form of the NNGP for fully connected networks. The proof sketch closely follows the approach by Novak and coauthors. ==== Network architecture specification ==== Consider a fully connected artificial neural network with inputs x {\displaystyle x} , parameters θ {\displaystyle \theta } consisting of weights W l {\displaystyle W^{l}} and biases b l {\displaystyle b^{l}} for each layer l {\displaystyle l} in the network, pre-activations (pre-nonlinearity) z l {\displaystyle z^{l}} , activations (post-nonlinearity) y l {\displaystyle y^{l}} , pointwise nonlinearity ϕ ( ⋅ ) {\displaystyle \phi (\cdot )} , and layer widths n l {\displaystyle n^{l}} . For simplicity, the width n L + 1 {\displaystyle n^{L+1}} of the readout vector z L {\displaystyle z^{L}} is taken to be 1. The parameters of this network have a prior distribution p ( θ ) {\displaystyle p(\theta )} , which consists of an isotropic Gaussian for each weight and bias, with the variance of the weights scaled inversely with layer width. This network is illustrated in the figure to the right, and described by the following set of equations: x ≡ input y l ( x ) = { x l = 0 ϕ ( z l − 1 ( x ) ) l > 0 z i l ( x ) = ∑ j W i j l y j l ( x ) + b i l W i j l ∼ N ( 0 , σ w 2 n l ) b i l ∼ N ( 0 , σ b 2 ) ϕ ( ⋅ ) ≡ nonlinearity y l ( x ) , z l − 1 ( x ) ∈ R n l × 1 n L + 1 = 1 θ = { W 0 , b 0 , … , W L , b L } {\displaystyle {\begin{aligned}x&\equiv {\text{input}}\\y^{l}(x)&=\left\{{\begin{array}{lcl}x&&l=0\\\phi \left(z^{l-1}(x)\right)&&l>0\end{array}}\right.\\z_{i}^{l}(x)&=\sum _{j}W_{ij}^{l}y_{j}^{l}(x)+b_{i}^{l}\\W_{ij}^{l}&\sim {\mathcal {N}}\left(0,{\frac {\sigma _{w}^{2}}{n^{l}}}\right)\\b_{i}^{l}&\sim {\mathcal {N}}\left(0,\sigma _{b}^{2}\right)\\\phi (\cdot )&\equiv {\text{nonlinearity}}\\y^{l}(x),z^{l-1}(x)&\in \mathbb {R} ^{n^{l}\times 1}\\n^{L+1}&=1\\\theta &=\left\{W^{0},b^{0},\dots ,W^{L},b^{L}\right\}\end{aligned}}} ==== ==== z l | y l {\displaystyle z^{l}|y^{l}} is a Gaussian process We first observe that the pre-activations z l {\displaystyle z^{l}} are described by a Gaussian process conditioned on the preceding activations y l {\displaystyle y^{l}} . This result holds even at finite width. Each pre-activation z i l {\displaystyle z_{i}^{l}} is a weighted sum of Gaussian random variables, corresponding to the weights W i j l {\displaystyle W_{ij}^{l}} and biases b i l {\displaystyle b_{i}^{l}} , where the coefficients for each of those Gaussian variables are the preceding activations y j l {\displaystyle y_{j}^{l}} . Because they are a weighted sum of zero-mean Gaussians, the z i l {\displaystyle z_{i}^{l}} are themselves zero-mean Gaussians (conditioned on the coefficients y j l {\displaystyle y_{j}^{l}} ). Since the z l {\displaystyle z^{l}} are jointly Gaussian for any set of y l {\displaystyle y^{l}} , they are described by a Gaussian process conditioned on the preceding activations y l {\displaystyle y^{l}} . The covariance or kernel of this Gaussian process depends on the weight and bias variances σ w 2 {\displaystyle \sigma _{w}^{2}} and σ b 2 {\displaystyle \sigma _{b}^{2}} , as well as the second moment matrix K l {\displaystyle K^{l}} of the preceding activations y l {\displaystyle y^{l}} , z i l ∣ y l ∼ G P ( 0 , σ w 2 K l + σ b 2 ) K l ( x , x ′ ) = 1 n l ∑ i y i l ( x ) y i l ( x ′ ) {\displaystyle {\begin{aligned}z_{i}^{l}\mid y^{l}&\sim {\mathcal {GP}}\left(0,\sigma _{w}^{2}K^{l}+\sigma _{b}^{2}\right)\\K^{l}(x,x')&={\frac {1}{n^{l}}}\sum _{i}y_{i}^{l}(x)y_{i}^{l}(x')\end{aligned}}} The effect of the weight scale σ w 2 {\displaystyle \sigma _{w}^{2}} is to rescale the contribution to the covariance matrix from K l {\displaystyle K^{l}} , while the bias is shared for all inputs, and so σ b 2 {\displaystyle \sigma _{b}^{2}} makes the z i l {\displaystyle z_{i}^{l}} for different datapoints more similar and

    Read more →
  • Task Force on Process Mining

    Task Force on Process Mining

    The IEEE Task Force on Process Mining (TFPM) is a non-commercial association for process mining. The IEEE (Institute of Electrical and Electronics Engineers) Task Force on Process Mining was established in October 2009 as part of the IEEE Computational Intelligence Society at the Eindhoven University of Technology. The task force is supported by over 80 organizations and has around 750 members. The main goal of the task force is to promote the research, development, education, and understanding of process mining. == About == In 2012, the IEEE World Congress on Computational Intelligence/ IEEE Congress on Evolutionary Computation held a session on Process Mining. Process mining is a type of research that is a mix of computational intelligence and data mining, as well as process modeling and analysis. === Activities and organization === The Task Force on Process Mining has a Steering Committee and an Advisory Board. The Steering Committee, was chaired by Wil van der Aalst in its inception in 2009, defined 15 action lines. These include the organization of the annual International Process Mining Conference (ICPM) series, standardization efforts leading to the IEEE XES standard for storing and exchanging event data, and the Process Mining Manifesto which was translated into 16 languages. The Task Force on Process Mining also publishes a newsletter, provides data sets, organizes workshops and competitions, and connects researchers and practitioners. In 2016, the IEEE Standards Association published the IEEE Standard for Extensible Event Stream (XES), which is a widely accepted file format by the process mining community. As of 2023, Boudewijn van Dongen serves as chair of the Steering Committee. Wil van der Aalst and Moe Wynn both serve as vice-chair of the Steering Committee.

    Read more →
  • Five safes

    Five safes

    The Five Safes is a framework for helping make decisions about making effective use of data which is confidential or sensitive. It is mainly used to describe or design research access to statistical data held by government and health agencies, and by data archives such as the UK Data Service. It is not an internationally accepted standard. Two of the Five Safes refer to statistical disclosure control, and so the Five Safes is usually used to contrast statistical and non-statistical controls when comparing data management options. == Concept == The Five Safes proposes that data management decisions be considered as solving problems in five 'dimensions': projects, people, settings, data and outputs. The combination of the controls leads to 'safe use'. These are most commonly expressed as questions, for example: These dimensions are scales, not limits. That is, solutions can have a mix of more or fewer controls in each dimension, but the overall aim of 'safe use' independent of the particular mix. For example, a public use file available for open download cannot control who uses it, where or for what purpose, and so all the control (protection) must be in the data itself. In contrast, a file which is only accessed through a secure environment with certified users can contain very sensitive information: the non-statistical controls allow the data to be 'unsafe'. One academic likened the process to a graphic equalizer, where bass and treble can be combined independently to produce a sound the listener likes, which has proven to be a very useful metaphor. This 2023 Data Foundation webinar is an expert discussion of how the elements interact, including an excellent introductory representation. There is no 'order' to the Five Safes, in that one is necessarily more important than the others. However, Ritchie argued that the 'managerial' controls (projects, people, setting) should be addressed before the 'statistical' controls (data, output). The Five Safes concept is associated with other topics which developed from the same programme at ONS, although these are not necessarily implemented. Safe people is associated with 'active researcher management', while safe outputs is linked with principles-based output statistical disclosure control. The Five Safes is a positive framework, describing what is and is not. The EDRU ('evidence-based, default-open, risk-managed, user-centred') attitudinal model is sometimes used to give a normative context == The 'data access spectrum' == From 2003 the Five Safes was also represented in a simpler form as a 'Data Access Spectrum'. The non-data controls (project, people, setting, outputs) tend to work together, in that organisations often see these as a complementary set of restrictions on access. These can then be contrasted with choices about data anonymisation to present a linear representation of data access options. This presentation is consistent with the idea of 'data as a residual', as well as data protection laws of the time which often characterised data simply as anonymous or not anonymous. A similar idea had already been developed independently in 2001 by Chuck Humphrey of the Canadian RDC network, the 'continuum of access'. More recently, The Open Data Institute has developed a 'Data Spectrum toolkit' which includes industry-specific examples. == History and terminology == The Five Safes was devised in the winter of 2002/2003 by Felix Ritchie at the UK Office for National Statistics (ONS) to describe its secure remote-access Virtual Microdata Laboratory (VML). It was described at this time as the 'VML Security Model'. This was adopted by the NORC data enclave, and more widely in the US, as the 'portfolio model' (although this is now also used to refer to a slightly different legal/statistical/educational breakdown). In 2012 the framework as was still being referred to as the 'VML security model', but its increasing use among non-UK organisations led to the adoption of the more general and informative phrase 'Five Safes'. The original framework only had four safes (projects, people, settings and outputs): the framework was used to describe highly detailed data access through a secure environment, and so the 'data' dimension was irrelevant. From 2007 onwards, 'safe data' was included as the framework was used to a describe a wider range of ONS activities. As the US version was based upon the 2005 specification, some US iterations uses have the original four dimensions (eg). Some discussions, such as the OECD, use the term 'secure' instead 'safe'. However, the use of both these terms can cause presentational problems: less control in a particular dimension could be seen to imply 'unsafe users' or 'insecure settings', for example, which distracts from the main message. Hence, the Australian government uses the term "five data sharing principles". The 'Anonymisation Decision-Making Framework' uses a framework based on the Five Safes but relabelling "projects", "people", and "settings" as "governance", "agency" and "infrastructure", respectively; "Output" is omitted, and "safe use" becomes "functional anonymisation". There is no reference to the Five Safes or any associated literature. The Australian version was required to include references to the Five Safes, and presented it as an alternative without comment. == Application == The framework has had three uses: pedagogical, descriptive, and design. Since 2016, it has also been used, directly and indirectly in legislation. See for more detailed examples. === Pedagogy === The first significant use of the framework, other than internal administrative use, was to structure researcher training courses at the UK Office for National Statistics from 2003. UK Data Archive, Administrative Data Research Network, Eurostat, Statistics New Zealand, the Mexican National Institute of Statistics and Geography, NORC, Statistics Canada and the Australian Bureau of Statistics, amongst others, have also used this framework. Most of these courses are for researchers using restricted-access facilities; the Eurostat courses are unusual in that they are designed for all users of sensitive data. === Description === The framework is often used to describe existing data access solutions (e.g. UK HMRC Data Lab, UK Data Service, Statistics New Zealand) or planned/conceptualised ones (e.g. Eurostat in 2011). An early use was to help identify areas where ONS' still had 'irreducible risks' in its provision of secure remote access. The framework is mostly used for confidential social science data. To date it appears to have made little impact on medical research planning, although it is now included in the revised guidelines on implementing HIPAA regulations in the US, and by Cancer Research UK and the Health Foundation in the UK. It has also been used to describe a security model for the Scottish Health Informatics Programme. === Design === In general the Five Safes has been used to describe solutions post-factum, and to explain/justify choices made, but an increasing number of organisations have used the framework to design data access solutions. For example, the Hellenic Statistical Agency developed a data strategy built around the Five Safes in 2016; the UK Health Foundation used the Five Safes to design its data management and training programmes. Use in the private sector is less common but some organisations have incorporated the Five Safes into consulting services. In 2015 the UK Data Service organized a workshop to encourage data users from the academic and private sectors to think about how to manage confidential research data, using the Five Safes to demonstrate alternative options and best practice. Early adopters for strategic design use were in Australia: both the Australian Bureau of Statistics and the Australian Department of Social Service used the Five Safes as an ex ante design tool. In 2017 the Australian Productivity Commission recommended adopting a version of the framework to support cross-government data sharing and re-use. This underwent extensive consultation and culminated in the DAT Act 2022. Since 2020 the Five Safes has been the overriding framework for the design of new secure facilities and data sharing arrangements in the UK for public health and social sciences. This has been promoted by the Office for Statistics Regulation, the UK Statistics Authority, NHS DIgital, and the research funding bodies Administrative Data Research UK and DARE UK. === Regulation and legislation === Three laws have incorporated the Fives Safes. They are explicit in the South Australian Public Sector (Data Sharing) Act 2016, and implicit in the research provisions of the UK Digital Economy Act 2017. The Australian Data Availability and Transparency Act 2022 renames the Five Safes as the Five Data Sharing Principles.A 2025 statutory review of the DAT Act 2022 found "that the DAT Act has not been effective in achieving its objectives.". The review includes specific referen

    Read more →
  • Reference data

    Reference data

    Reference data is data used to classify or categorize other data. Typically, they are static or slowly changing over time. Examples of reference data include: Units of measurement Country codes Corporate codes Fixed conversion rates e.g., weight, temperature, and length Calendar structure and constraints Reference data sets are sometimes alternatively referred to as a "controlled vocabulary" or "lookup" data. Reference data differs from master data. While both provide context for business transactions, reference data is concerned with classification and categorisation, while master data is concerned with business entities. A further difference between reference data and master data is that a change to the reference data values may require an associated change in business process to support the change, while a change in master data will always be managed as part of existing business processes. For example, adding a new customer or sales product is part of the standard business process. However, adding a new product classification (e.g. "restricted sales item") or a new customer type (e.g. "gold level customer") will result in a modification to the business processes to manage those items. == Externally-defined reference data == For most organisations, most or all reference data is defined and managed within that organisation. Some reference data, however, may be externally defined and managed, for example by standards organizations. An example of externally defined reference data is the set of country codes as defined in ISO 3166-1. == Reference data management == Curating and managing reference data is key to ensuring its quality and thus fitness for purpose. All aspects of an organisation, operational and analytical, are greatly dependent on the quality of an organization's reference data. Without consistency across business process or applications, for example, similar things may be described in quite different ways. Reference data gain in value when they are widely re-used and widely referenced. Examples of good practice in reference data management include: Formalize the reference data management Use external reference data as much as possible Govern the reference data specific to your enterprise Manage reference data at enterprise level Version control your reference data

    Read more →
  • Web intelligence

    Web intelligence

    Web intelligence is the area of scientific research and development that explores the roles and makes use of artificial intelligence and information technology for new products, services and frameworks that are empowered by the World Wide Web. The term was coined in a paper written by Ning Zhong, Jiming Liu Yao and Y.Y. Ohsuga in the Computer Software and Applications Conference in 2000. == Research == The research about the web intelligence covers many fields – including data mining (in particular web mining), information retrieval, pattern recognition, predictive analytics, the semantic web, web data warehousing – typically with a focus on web personalization and adaptive websites.

    Read more →
  • Enterprise data planning

    Enterprise data planning

    Enterprise data planning is the starting point for enterprise wide change. It states the destination and describes how you will get there. It defines benefits, costs and potential risks. It provides measures to be used along the way to judge progress and adjust the journey according to changing circumstances. Data is fundamental to investment enterprises. Effective, economic management of data underpins operations and enables transformations needed to satisfy customer demands, competition and regulation. Data warehouse(s) and other aspects of the overall data architecture are critical to the enterprise. EDMworks has created a strategic data planning approach for the Investment Sector. It consists of a planning process, planning intranets, templates and training materials. EDMworks planning process is based on the belief that extensive domain knowledge significantly shortens planning iterations and enables progressively higher quality plans to be produced and implemented. This approach drives the development of an effective and economic enterprise data architecture. Enterprise data planning is based on proven business disciplines. Key architectural layers for data and applications are then added in order to provide an enterprise wide understanding of the uses and interdependencies of data. This enables the definition of the core components of the EDM plan: Industry structure and business objectives Assessment of systems and services Target architecture for applications, data and infrastructure Target organization structures Systems, database, infrastructure and organizational plans Business case, costs, benefits, results and risks. EDMworks uses several components from the Open Systems Group TOGAF enterprise systems planning process. TOGAF acts as an extension to good business planning methods to provide a framework for the development of the systems and data architectural components. == History == James Martin was one of the pathfinders in data planning methodologies. He was one of the first to identify data as being an enterprise wide asset that required management. He developed a series of tools and methods to support that process. Most of the large consulting firms developed their own methods to address the same basic issue. Frequently, their approaches were incorporated into their own branded system development methodologies that encompassed the complete systems development life-cycle. Others, such as Ed Tozer, developed more focused offerings that dealt with the complexities of extracting key business needs from senior management and then defining relevant architectural visions for the specific enterprise. From these various sources, the concepts of Business, Data, Applications and Technology Architectures emerged. The Open Group Architectural Framework (TOGAF) has taken this work forward and has established a sound method in TOGAF version 9. EDMworks approach is to adopt these planning and architectural practices as a basis and then add two additional dimensions to the planning and implementation focus: Domain knowledge of the Investments sector. Investments is a complex global industry with a common set of characteristics about clients, information vendors, competition and regulation. Domain knowledge significantly improves the quality of the planning and implementation processes Development of people and teams. Change is a major feature of in any Enterprise Data Management program and people and teams both need development in order to make EDM effective throughout an organization.

    Read more →
  • Known-item search

    Known-item search

    Known-item search is a specialization of information exploration which represents the activities carried out by searchers who have a particular item in mind. In the context of library catalogs, known‐item search means a search for an item for which the author or title is known. Although the concept of known-item search originated in library science, it is now applied in the context of web search and other online search activities. Known-item search is distinguished from exploratory search, in which a searcher is unfamiliar with the domain of their search goal, unsure about the ways to achieve their goal, and/or unsure about what their goal is.

    Read more →
  • Artificial intelligence industry in Canada

    Artificial intelligence industry in Canada

    The artificial intelligence industry in Canada is a rapidly expanding sector. Although Canada held a pioneering role in the early development of artificial intelligence, transforming research excellence into broad commercial adoption has proven challenging. Despite globally recognized scientific achievements and a deep pool of skilled experts, by June 2024, Canada recorded the lowest rate of AI integration among OECD countries, with only 12% of firms implementing AI in their products or services. However, AI adoption has shown significant momentum—doubling from mid-2024 to mid-2025, rising from 6.1% to 12.2%. As of September 2025, Statistics Canada indicated that while about one-third of Canadian businesses had no plans to adopt artificial intelligence in the next year, 14.5% reported intentions to begin using AI for producing goods or delivering services. The primary reasons for not moving forward with AI were lack of relevance, insufficient knowledge, and privacy concerns. According to Public Works Canada (PwC), the pace of AI adoption in Canada is roughly three-quarters of the United States rate, highlighting a notable gap between the two countries in business integration of this technology. British-Canadian computer scientist Geoffrey Hinton stated in 2025 that Canadian companies are adopting artificial intelligence at a slower pace, which may result in the loss of the country's early advantages in the field. At the "All In AI" conference held in Montreal in September 2025, the Minister of Artificial Intelligence and Digital Innovation Evan Solomon, described "Building digital sovereignty" as the most pressing democratic issue of the time. He introduced a 26-person task force focused on updating Canada's AI strategy. In their 2024 report " "Learning Together for Responsible Artificial Intelligence" report, the Innovation, Science, and Economic Development Canada stressed that public awareness, trust, and AI literacy are essential for the responsible adoption and governance of AI in Canada. Montreal workshops in 2021 expanded the OECD's 2019 definition of AI as "the set of computer techniques that enable a machine (e.g., a computer or telephone) to perform tasks that typically require intelligence, such as reasoning or learning. It is also referred to as the automation of intelligent tasks. Scientific developments in AI, such as deep-learning techniques, have made it possible to design access to huge amounts of data and ever-increasing computing power. These new techniques have been rapidly deployed on a large scale in all areas of social life, in transport, education, culture and health." == Federal investments and policy == The 2025 federal budget allocates over $1 billion over the next five years to bolster Canada's artificial intelligence and quantum computing ecosystem. == Industry landscape or research hubs == AlexNet, an influential deep convolutional neural network developed at the University of Toronto by Alex Krizhevsky, Ilya Sutskever, and Geoffrey Hinton, marked a pivotal turning point in modern artificial intelligence. In 2012, it achieved a dramatic reduction in error rates for the ImageNet Large Scale Visual Recognition Challenge (ILSVRC), showcasing the practical power of deep learning and GPU acceleration. The success of AlexNet helped cement Canada’s reputation for AI leadership and inspired rapid adoption of deep learning across the technology sector, with ongoing impact in both academic and commercial domains. In healthcare, AlexNet has been adapted for medical imaging to assist with analyzing radiographs, mammograms, and other scans, including identifying abnormalities and supporting clinical diagnosis. In 2015, the Ottawa-based start-up Advanced Symbolics Inc. (ASI) began developing Polly, an artificial intelligence system designed to analyze and anticipate how target audiences behave—enabling more effective communication strategies and advertising campaigns. Polly was named after its first assignment analyzing the politics of Brexit. The AI gained widespread attention in 2016 for accurately forecasting both the Brexit referendum and the 2016 U.S. presidential election won by Donald Trump. The company states that Polly is used by organizations in diverse sectors—including healthcare, politics, entertainment, and mental health research—to support decision-making based on predictive analytics. Chartwatch, an AI tool developed in Canada, has been shown to reduce unexpected hospital deaths by 26% according to a 2024 study. The system analyzes patient data to detect subtle signs of deterioration, supporting healthcare teams in providing timely interventions. === Notable figures in AI in Canada === Geoffrey Hinton's decades-long work eventually formed the foundation of artificial intelligence, which earned him the Nobel Prize for physics in 2024. Yoshua Bengio, who won the Turing Award in 2018 for his pioneering work in deep learning, founded what would become Mila in 1993. Mila, is currently a collaboration between four Montreal-based academic partners.—the Pan-Canadian Artificial Intelligence Strategy includes Alberta's Amii, Toronto's Vector Institute, and Mila. Fakhreddine Karray's work on operational AI has had tangible impact across several Canadian-relevant sectors, notably intelligent transportation systems, virtual healthcare, and driver safety. === AI in the oil and gas industry === According to a 2020 Ernst & Young report the oil and gas industry in Canada is using AI in automating routine, repetitive, and dangerous tasks with technologies like robotic process automation and machine learning; optimizing production and processing; enhancing transportation logistics; improving equipment operation and monitoring; and enabling preventative maintenance. AI is also deployed for data analysis to improve prediction and decision-making, and is expected to automate up to 50% of job competencies in upstream oil and gas by 2040. Oilsands giant Suncor Energy operates a large fleet of autonomous trucks and has started using AI in its dispatch system at the Mildred Lake mine. As of 2024, AI manages routine tasks such as allocating trucks to dump stations and sending them to refuelling locations. === Indigenous and Inuit Innovation in AI === Indigenous organizations have been working on the creation of new technologies for language revitalization in partnership with National Research Council of Canada since the mid-2010s. In 2025, Inuit researchers and technology partners launched an AI-powered initiative to support the revitalization and preservation of Inuktitut, demonstrating how artificial intelligence can be adapted for Indigenous language and cultural priorities. A 2025 CBC article notes that, while AI can help revitalize Inuktitut, Inuit leaders emphasize concerns about data sovereignty, information ownership, and the need for Indigenous leadership to ensure transparency, privacy, and accountability in AI development. == Regulation == Canada's Artificial Intelligence and Data Act (AIDA) was proposed in November 2022, as part of the Digital Charter Implementation Act (Bill C-27). As well voluntary codes, such as the September 2023 Code of Conduct for Generative AI, and landmark investments in advanced computing infrastructure and the Canadian Artificial Intelligence Safety Institute (CAISI) reflect Canada's commitment to both safety and global competitiveness. == AI infrastructure == Canada has undertaken efforts to expand its AI computing infrastructure at both provincial and federal levels. The federal government's Canadian Sovereign AI Compute Strategy, allocated up to C$2 billion in Budget 2024, aims to enhance computing capacity to support domestic AI industry growth and AI adoption across the economy, with up to C$700 million designated to mobilize private sector investment in new or expanded data centres. Alberta has introduced an AI Data Centres Strategy to position itself as a leading North American destination for data centre investment, targeting C$100 billion worth of AI data centres under development by 2030. One major project under Alberta's strategy is the Wonder Valley AI Data Centre Park near Grande Prairie, which was exempted from provincial environmental impact assessment in April 2026 but still requires permits demonstrating safe construction and operation. According to Statista, as of April 2026, Canada has 287 data centres.

    Read more →
  • INDIAai

    INDIAai

    INDIAai is a web portal launched by the Government of India on 07 March 2024 for artificial intelligence-related developments in India. It is known as the National AI Portal of India, which was jointly started by the Ministry of Electronics and Information Technology (MeitY), the National e-Governance Division (NeGD) and the National Association of Software and Service Companies (NASSCOM) with support from the Department of School Education and Literacy (DoSE&L) and Ministry of Human Resource Development. == History == The portal was launched on 30 May 2020, by Ravi Shankar Prasad, the Union Minister for Electronics and IT, Law and Justice and Communications, on the first anniversary of the second tenure of Prime Minister Narendra Modi-led government. A national program for the youth, 'Responsible AI for Youth', was also launched on the same day. As of 2022, the website was visited by more than 4.5 lakh users with 1.2 million page views. It has 1151 articles on artificial intelligence, 701 news stories, 98 reports, 95 case studies and 213 videos on its portal. It maintains a database on AI ecosystem of India featuring 121 government initiatives and 281 startups. In May 2022, INDIAai released a book titled 'AI for Everyone' that covers the basics of AI. Cabinet chaired by the Prime Minister Narendra Modi has approved the comprehensive national-level IndiaAI mission with a budget outlay of Rs.10,371.92 crore. The Mission will be implemented by ‘IndiaAI’ Independent Business Division (IBD) under Digital India Corporation (DIC). == Objective and features == It aims to function as a one-stop portal for all AI-related development in India. The platform publishes resources such as articles, news, interviews, and investment funding news and events for AI startups, AI companies, and educational firms related to artificial intelligence in India. It also distributes documents, case studies, and research reports. Additionally, the platform provides education and employment opportunities related to AI. It offers AI courses, both free and paid.

    Read more →
  • EdgeRank

    EdgeRank

    EdgeRank is the name commonly given to the algorithm that Facebook uses to determine what articles should be displayed in a user's News Feed. As of 2011, Facebook has stopped using the EdgeRank system and uses a machine learning algorithm that, as of 2013, takes more than 100,000 factors into account. EdgeRank was developed and implemented by Serkan Piantino. == Formula and factors == In 2010, a simplified version of the EdgeRank algorithm was presented as: ∑ e d g e s e u e w e d e {\displaystyle \sum _{\mathrm {edges\,} e}u_{e}w_{e}d_{e}} where: u e {\displaystyle u_{e}} is user affinity. w e {\displaystyle w_{e}} is how the content is weighted. d e {\displaystyle d_{e}} is a time-based decay parameter. User Affinity: The User Affinity part of the algorithm in Facebook's EdgeRank looks at the relationship and proximity of the user and the content (post/status update). Content Weight: What action was taken by the user on the content. Time-Based Decay Parameter: New or old. Newer posts tend to hold a higher place than older posts. Some of the methods that Facebook uses to adjust the parameters are proprietary and not available to the public. A study has shown that it is possible to hypothesize a disadvantage of the "like" reaction and advantages of other interactions (e.g., the "haha" reaction or "comments") in content algorithmic ranking on Facebook. The "like" button can decrease the organic reach as a "brake effect of viral reach". The "haha" reaction, "comments" and the "love" reaction could achieve the highest increase in total organic reach. == Impact == EdgeRank and its successors have a broad impact on what users actually see out of what they ostensibly follow: for instance, the selection can produce a filter bubble (if users are exposed to updates which confirm their opinions etc.) or alter people's mood (if users are shown a disproportionate amount of positive or negative updates). As a result, for Facebook pages, the typical engagement rate is less than 1% (or less than 0.1% for the bigger ones), and organic reach 10% or less for most non-profits. As a consequence, for pages, it may be nearly impossible to reach any significant audience without paying to promote their content.

    Read more →
  • WCF Data Services

    WCF Data Services

    WCF Data Services (formerly ADO.NET Data Services, codename "Astoria") is a platform for what Microsoft calls Data Services. It is actually a combination of the runtime and a web service through which the services are exposed. It also includes the Data Services Toolkit which lets Astoria Data Services be created from within ASP.NET itself. The Astoria project was announced at MIX 2007, and the first developer preview was made available on April 30, 2007. The first CTP was made available as a part of the ASP.NET 3.5 Extensions Preview. The final version was released as part of Service Pack 1 of the .NET Framework 3.5 on August 11, 2008. The name change from ADO.NET Data Services to WCF data Services was announced at the 2009 PDC. == Overview == WCF Data Services exposes data, represented as Entity Data Model (EDM) objects, via web services accessed over HTTP. The data can be addressed using a REST-like URI. The data service, when accessed via the HTTP GET method with such a URI, will return the data. The web service can be configured to return the data in either plain XML, JSON or RDF+XML. In the initial release, formats like RSS and ATOM are not supported, though they may be in the future. In addition, using other HTTP methods like PUT, POST or DELETE, the data can be updated as well. POST can be used to create new entities, PUT for updating an entity, and DELETE for deleting an entity. == Description == Windows Communication Foundation (WCF) comes to the rescue when we find ourselves not able to achieve what we want to achieve using web services, i.e., other protocols support and even duplex communication. With WCF, we can define our service once and then configure it in such a way that it can be used via HTTP, TCP, IPC, and even Message Queues. We can consume Web Services using server side scripts (ASP.NET), JavaScript Object Notations (JSON), and even REST (Representational State Transfer). Understanding the basics When we say that a WCF service can be used to communicate using different protocols and from different kinds of applications, we will need to understand how we can achieve this. If we want to use a WCF service from an application, then we have three major questions: 1.Where is the WCF service located from a client's perspective? 2.How can a client access the service, i.e., protocols and message formats? 3.What is the functionality that a service is providing to the clients? Once we have the answer to these three questions, then creating and consuming the WCF service will be a lot easier for us. The WCF service has the concept of endpoints. A WCF service provides endpoints which client applications can use to communicate with the WCF service. The answer to these above questions is what is known as the ABC of WCF services and in fact are the main components of a WCF service. So let's tackle each question one by one. Address: Like a webservice, a WCF service also provides a URI which can be used by clients to get to the WCF service. This URI is called as the Address of the WCF service. This will solve the first problem of "where to locate the WCF service?" for us. Binding: Once we are able to locate the WCF service, one should think about how to communicate with the service (protocol wise). The binding is what defines how the WCF service handles the communication. It could also define other communication parameters like message encoding, etc. This will solve the second problem of "how to communicate with the WCF service?" for us. Contract: Now the only question one is left with is about the functionalities that a WCF service provides. The contract is what defines the public data and interfaces that WCF service provides to the clients. The URIs representing the data will contain the physical location of the service, as well as the service name. It will also need to specify an EDM Entity-Set or a specific entity instance, as in respectively http://dataserver/service.svc/MusicCollection or http://dataserver/service.svc/MusicCollection[SomeArtist] The former will list all entities in the Collection set whereas the latter will list only for the entity which is indexed by SomeArtist. The URIs can also specify a traversal of a relationship in the Entity Data Model. For example, http://dataserver/service.svc/MusicCollection[SomeSong]/Genre traverses the relationship Genre (in SQL parlance, joins with the Genre table) and retrieves all instances of Genre that are associated with the entity SomeSong. Simple predicates can also be specified in the URI, like http://dataserver/service.svc/MusicCollection[SomeArtist]/ReleaseDate[Year eq 2006] will fetch the items that are indexed by SomeArtist and had their release in 2006. Filtering and partition information can also be encoded in the URL as http://dataserver/service.svc/MusicCollection?$orderby=ReleaseDate&$skip=100&$top=50 Although the presence of skip and top keywords indicates paging support, in Data Services version 1 there is no method of determining the number of records available and thus impossible to determine how many pages there may be. The OData 2.0 spec adds support for the $count path segment (to return just a count of entities) and $inlineCount (to retrieve a page worth of entities and a total count without a separate round-trip....).

    Read more →
  • Controlled vocabulary

    Controlled vocabulary

    A controlled vocabulary provides a way to organize knowledge for subsequent retrieval. Controlled vocabularies are used in subject indexing schemes, subject headings, thesauri, taxonomies and other knowledge organization systems. Controlled vocabulary schemes mandate the use of predefined, preferred terms that have been preselected by the designers of the schemes, in contrast to natural language vocabularies, which have no such restriction. == In library and information science == In library and information science, controlled vocabulary is a carefully selected list of words and phrases, which are used to tag units of information (document or work) so that they may be more easily retrieved by a search. Controlled vocabularies solve the problems of homographs, synonyms and polysemes by a bijection between concepts and preferred terms. In short, controlled vocabularies reduce unwanted ambiguity inherent in normal human languages where the same concept can be given different names and ensure consistency. For example, in the Library of Congress Subject Headings (a subject heading system that uses a controlled vocabulary), preferred terms—subject headings in this case—have to be chosen to handle choices between variant spellings of the same word (American versus British), choice among scientific and popular terms (cockroach versus Periplaneta americana), and choices between synonyms (automobile versus car), among other difficult issues. Choices of preferred terms are based on the principles of user warrant (what terms users are likely to use), literary warrant (what terms are generally used in the literature and documents), and structural warrant (terms chosen by considering the structure, scope of the controlled vocabulary). Controlled vocabularies also typically handle the problem of homographs with qualifiers. For example, the term pool has to be qualified to refer to either swimming pool or the game pool to ensure that each preferred term or heading refers to only one concept. === Types used in libraries === There are two main kinds of controlled vocabulary tools used in libraries: subject headings and thesauri. While the differences between the two are diminishing, there are still some minor differences: Historically, subject headings were designed to describe books in library catalogs by catalogers while thesauri were used by indexers to apply index terms to documents and articles. Subject headings tend to be broader in scope describing whole books, while thesauri tend to be more specialized covering very specific disciplines. Because of the card catalog system, subject headings tend to have terms that are in indirect order (though with the rise of automated systems this is being removed), while thesaurus terms are always in direct order. Subject headings tend to use more pre-coordination of terms such that the designer of the controlled vocabulary will combine various concepts together to form one preferred subject heading. (e.g., children and terrorism) while thesauri tend to use singular direct terms. Thesauri list not only equivalent terms but also narrower, broader terms and related terms among various preferred and non-preferred (but potentially synonymous) terms, while historically most subject headings did not. For example, the Library of Congress Subject Heading itself did not have much syndetic structure until 1943, and it was not until 1985 when it began to adopt the thesauri type term "Broader term" and "Narrow term". The terms are chosen and organized by trained professionals (including librarians and information scientists) who possess expertise in the subject area. Controlled vocabulary terms can accurately describe what a given document is actually about, even if the terms themselves do not occur within the document's text. Well known subject heading systems include the Library of Congress system, Medical Subject Headings (MeSH) created by the United States National Library of Medicine, and Sears. Well known thesauri include the Art and Architecture Thesaurus and the ERIC Thesaurus. When selecting terms for a controlled vocabulary, the designer has to consider the specificity of the term chosen, whether to use direct entry, inter consistency and stability of the language. Lastly the amount of pre-coordination (in which case the degree of enumeration versus synthesis becomes an issue) and post-coordination in the system is another important issue. Controlled vocabulary elements (terms/phrases) employed as tags, to aid in the content identification process of documents, or other information system entities (e.g. DBMS, Web Services) qualifies as metadata. == Indexing languages == There are three main types of indexing languages. Controlled indexing language – only approved terms can be used by the indexer to describe the document Natural language indexing language – any term from the document in question can be used to describe the document Free indexing language – any term (not only from the document) can be used to describe the document When indexing a document, the indexer also has to choose the level of indexing exhaustivity, the level of detail in which the document is described. For example, using low indexing exhaustivity, minor aspects of the work will not be described with index terms. In general the higher the indexing exhaustivity, the more terms indexed for each document. In recent years free text search as a means of access to documents has become popular. This involves using natural language indexing with an indexing exhaustively set to maximum (every word in the text is indexed). These methods have been compared in some studies, such as the 2007 article, "A Comparative Evaluation of Full-text, Concept-based, and Context-sensitive Search". === Advantages === Controlled vocabularies are often claimed to improve the accuracy of free text searching, such as to reduce irrelevant items in the retrieval list. These irrelevant items (false positives) are often caused by the inherent ambiguity of natural language. Take the English word football for example. Football is the name given to a number of different team sports. Worldwide the most popular of these team sports is association football, which also happens to be called soccer in several countries. The word football is also applied to rugby football (rugby union and rugby league), American football, Australian rules football, Gaelic football, and Canadian football. A search for football therefore will retrieve documents that are about several completely different sports. Controlled vocabulary solves this problem by tagging the documents in such a way that the ambiguities are eliminated. Compared to free text searching, the use of a controlled vocabulary can dramatically increase the performance of an information retrieval system, if performance is measured by precision (the percentage of documents in the retrieval list that are actually relevant to the search topic). In some cases controlled vocabulary can enhance recall as well, because unlike natural language schemes, once the correct preferred term is searched, there is no need to search for other terms that might be synonyms of that term. === Disadvantages === A controlled vocabulary search may lead to unsatisfactory recall, in that it will fail to retrieve some documents that are actually relevant to the search question. This is particularly problematic when the search question involves terms that are sufficiently tangential to the subject area such that the indexer might have decided to tag it using a different term (but the searcher might consider the same). Essentially, this can be avoided only by an experienced user of controlled vocabulary whose understanding of the vocabulary coincides with that of the indexer. Another possibility is that the article is just not tagged by the indexer because indexing exhaustivity is low. For example, an article might mention football as a secondary focus, and the indexer might decide not to tag it with "football" because it is not important enough compared to the main focus. But it turns out that for the searcher that article is relevant and hence recall fails. A free text search would automatically pick up that article regardless. On the other hand, free text searches have high exhaustivity (every word is searched) so although it has much lower precision, it has potential for high recall as long as the searcher overcome the problem of synonyms by entering every combination. Controlled vocabularies may become outdated rapidly in fast developing fields of knowledge, unless the preferred terms are updated regularly. Even in an ideal scenario, a controlled vocabulary is often less specific than the words of the text itself. Indexers trying to choose the appropriate index terms might misinterpret the author, while this precise problem is not a factor in a free text, as it uses the author's own words. The use of controlled vocabularies can be costly compared to free

    Read more →
  • SeaTable

    SeaTable

    SeaTable is a no-code platform that allows users to develop and implement business processes. The cloud collaboration service SeaTable is marketed by the GmbH of the same name with headquarters in Mainz and additional offices in Berlin and Beijing, and developed by the same company as Seafile. == History == SeaTable is a collaborative database and low-code application platform developed as part of a joint venture between Seafile Ltd., a software company based in Guangzhou, China, and SeaTable GmbH, a German firm headquartered in Mainz. Founded in 2020, the project represents the international expansion of Seafile, a Chinese developer originally known for its file synchronization and sharing software. While SeaTable's cloud services and European client operations are managed by the German entity, the platform itself is developed in China by Seafile's engineering team. This cross-border structure, described by TechCrunch as an “unconventional path” for a Chinese startup expanding abroad, reflects Seafile's effort to maintain its product development in China while addressing growing scrutiny in Western markets over data governance and corporate control. In 2021, an innovation project led by the Cyber Innovation Hub at the IT School of the German Armed Forces started to evaluate the possibilities of a large-scale deployment at the German Armed Forces. The evaluation project is currently still ongoing. In 2022, SeaTable is optimizing its database backend to allow millions of records within one base in the future. The focus of development is increasingly on automation and visualization. In 2025, SeaTable introduced AI-powered automations with version 6. The update enabled the integration of large language models (LLMs) for text analysis and automated decision-making. SeaTable operates a self-hosted LLM on servers provided by Hetzner (Germany), while self-hosted deployments can connect to any compatible model. == Features == SeaTable combines the traditional capabilities of a spreadsheet such as Excel and supplements them with a wide range of functions for process automation and visualization as well as a fully comprehensive API. SeaTable is not a pure cloud solution, but can alternatively be installed on a private server and operated completely autonomously. In this way, the owner retains full control over their own data. The installation is done via Docker on a Linux server. == Security and privacy == While most no-code platforms exist only as SaaS solutions, SeaTable describes itself as a data-sparse European solution. While initially the SeaTable Cloud was hosted on Amazon AWS, the move to the German data centers of Swiss provider Exoscale then took place in May 2021. This was followed by the replacement of the Freshdesk cloud ticketing system with a self-hosted Zammad instance, and since April 2022 SeaTable has completely dispensed with all tracking cookies on its website.

    Read more →
  • How to Solve it by Computer

    How to Solve it by Computer

    How to Solve it by Computer is a computer science book by R. G. Dromey, first published by Prentice-Hall in 1982. It is occasionally used as a textbook, especially in India. It is an introduction to the whys of algorithms and data structures. Features of the book: The design factors associated with problems, The creative process behind coming up with innovative solutions for algorithms and data structures, The line of reasoning behind the constraints, factors and the design choices made. The very fundamental algorithms portrayed by this book are mostly presented in pseudocode and/or Pascal notation.

    Read more →
  • Semantic translation

    Semantic translation

    Semantic translation is the process of using semantic information to aid in the translation of data in one representation or data model to another representation or data model. Semantic translation takes advantage of semantics that associate meaning with individual data elements in one dictionary to create an equivalent meaning in a second system. An example of semantic translation is the conversion of XML data from one data model to a second data model using formal ontologies for each system such as the Web Ontology Language (OWL). This is frequently required by intelligent agents that wish to perform searches on remote computer systems that use different data models to store their data elements. The process of allowing a single user to search multiple systems with a single search request is also known as federated search. Semantic translation should be differentiated from data mapping tools that do simple one-to-one translation of data from one system to another without actually associating meaning with each data element. Semantic translation requires that data elements in the source and destination systems have "semantic mappings" to a central registry or registries of data elements. The simplest mapping is of course where there is equivalence. There are three types of Semantic equivalence: Class Equivalence - indicating that class or "concepts" are equivalent. For example: "Person" is the same as "Individual" Property Equivalence - indicating that two properties are equivalent. For example: "PersonGivenName" is the same as "FirstName" Instance Equivalence - indicating that two individual instances of objects are equivalent. For example: "Dan Smith" is the same person as "Daniel Smith" Semantic translation is very difficult if the terms in a particular data model do not have direct one-to-one mappings to data elements in a foreign data model. In that situation, an alternative approach must be used to find mappings from the original data to the foreign data elements. This problem can be alleviated by centralized metadata registries that use the ISO-11179 standards such as the National Information Exchange Model (NIEM).

    Read more →