AI Face Judge

AI Face Judge — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

Passenger drone

A passenger drone is an autonomous aircraft that is designed to carry a small number of passengers to a destination. In 2021, Ehang, a technology company based in Guangzhou, China, developed the Ehang 184, the world's first passenger drone. == History == Unmanned aerial vehicles were first introduced in World War 1, when Britain first developed the Aerial Target, an aircraft controlled remotely through radio signals. A year later in the United States, testing of Kettering Bug, a 12-foot long biplane attached with a bomb and that launched via a “slingshot-like rail”, was also under progress. Both of their unreliable test results and their possibility of endangering friendly troops in deployment caused neither aircraft to be used during the war. Production of UAVs continued after World War I and into World War II and the Vietnam War, where they would be invaluable in assisting with training as well as reconnaissance. Late 20th century also saw the proposition and development of unique methods of travel, including personal jetpacks and even flying cars. While the previously mentioned are not drones, they serve as a precursor and foundation for the passenger drones of today. The first passenger drone was unveiled on January 6 of 2016 at the international Consumer Electronics Show (CES) in Las Vegas. Produced by Ehang, a Chinese company based in Guangzhou, the 184 was a one passenger drone equipped with four propellers that could fly for approximately 23 minutes at a top speed of 63 mph. Since then, many new companies have entered the market, but none yet have been accessible by the public. == Technological development == Since 2013, improvements in designs to wing structures have contributed to the economic feasibility of passenger drones. New structural advancements, such as the flapping-wing propulsion system based on the mechanisms of birds’ wings, are more available as they have proven their capabilities in laboratory testing. As of September 29th, 2015, most market-ready drones are delivery drones with a carrying capacity limited to small packages - with a typical max capacity of under 5 pounds. However, while the technology exists for drones with larger carrying capacities, specifically those capable of carrying multiple humans, the execution of this technology is not yet market accessible. This capacity limit must be addressed for passenger drones; given current designs strive to carry a maximum of 5 people. However, some estimates believe that passengers drones could become a reality, specifically for paid transportation and emergency purposes, as early as 2026. With implementation of this technology, there could be significant effects on ground traffic including reducing gridlock in heavily congested areas and conserving up to 15% of the fuel currently used in heavy traffic patterns. However, extensive growth of the passenger drone market also risks clouding the low-altitude airspace and causing new safety risks. However, this concern is being addressed by recent advancements in the Internet of Drones (IoD) which links drones together to ensure appropriate pathing and reduce mid-air collisions. While this brings additional security issues, including maintaining reliable communication channels in the case of technological failure, researchers hope that this will help reduce crashes that can result in damage to passengers, buildings, and people in and around the airspace. == Notable companies == Ehang is a Chinese company that has developed numerous drones including passenger plane Ehang 184. EHang 184 was their first model, developed as an eight dual rotor wing blade drone that can carry two passengers. The model was retired in 2020 and is replaced by the Ehang 216. Ehang also released a one passenger drone, Ehang 116. Ehang in 2021 unveiled the model VT-30. VT-30 is designed to have eight dual rotor wing blades to complement its fixed wing platform. Flyastro, a Texas-based drone company, developed the Astro ALTA, with two and four person passenger models. The company is known for being the first to develop a solar-powered airplane. The development team initially began with the model, Elroy. It was a two passenger drone with similar design to the ALTA. Once flight was achieved, the model Astro ALTA began development. Joby Aviation is a California based company that has developed a five passenger drone, with one seat for the pilot. The company expects to complete its FAA certification process 2022. Joby in 2020 acquired a 75 million dollar investment from service provider Uber Technologies Inc., leading to Uber Elevate and Expands partnership. Archer Aviation is a California-based company that has developed a two passenger model called Maker. It has fixed wings with twelve rotor wings. Archer is developing five person model. United Airlines has partnered with Archer for commercial sale of the model, Maker. Maker is expected to be released within Los Angeles and Miami by 2024. CityAirbus is a drone project developed by Airbus, a European multinational aerospace company, based in the Netherlands. CityAirbus has developed a four- person passenger drone with fixed wings that include rotor wing blades. Its expected certification for public flight is in 2025. Boeing, an American multinational aviation corporation is developing a passenger drone model called the Passenger Air Vehicle (PAV). The model is a fixed wing with eight rotor blade wings attached onto a platform underneath the base structure. This model can hold two passengers and still is in development. Volocopter is a German aircraft manufacturer that is developing a passenger drone called Volocity. The model consist of eighteen rotor wings above the cockpit on a circular ring. Japan Airlines, an investor of Volocopter plans to have public test in Japan as early as 2023. == Future use == === Potential benefits === Passenger drones can greatly reduce the time for travel. As passenger drones flight paths are not restricted by conventional roads, the travel distance is shortened. Current ventures such as Joby Aviation, after acquiring Uber Air, plan to take advantage of this technology in the form of air taxis. Other potential benefits include the use of passenger drones by emergency services such as search and rescue missions and the delivery of life saving goods. Companies like Ehang have already begun using passenger drones as emergency vehicles as a response to the potential river collapses during the flood season in China. === Concerns === Passenger and air traffic safety remains at the forefront of concerns. Regulations for air traffic centered around passenger drones are still underway and would continue to develop with increasing use cases for passenger drones. Remote security threats on commercial drones such as Man-In-The-Middle (MITM) attack have also exposed the vulnerabilities in current drone systems. Among American adults, 54 percent say that they would feel unsafe flying inside a passenger drone. Passenger drones can be very noisy; a single passenger drone such as Joby Aviation’s all-electric vertical take-off and landing (“eVTOL”) aircraft has an estimated noise production of 70 decibels (dB), a noise level equating to “loud traffic”.
Read more →
Automate This

Automate This: How Algorithms Came to Rule Our World is a book written by Christopher Steiner and published by Penguin Group. == Book == Steiner begins his study of algorithms on Wall Street in the 1980s but also provides examples from other industries. For example, he explains the history of Pandora Radio and the use of algorithms in music identification. He expresses concern that such use of algorithms may lead to the homogenization of music over time. Steiner also discusses the algorithms that eLoyalty (now owned by Mattersight Corporation following divestiture of the technology) was created by dissecting 2 million speech patterns and can now identify a caller's personality style and direct the caller with a compatible customer support representative. Steiner's book shares both the warning and the opportunity that algorithms bring to just about every industry in the world, and the pros and cons of the societal impact of automation (e.g. impact on employment).
Read more →
Clue (mobile app)

Clue is a menstrual health app developed by the Berlin-based technology company BioWink GmbH. The app has over 15 million users from 180 countries. The startup has raised over $17 million from backers that include Union Square Ventures and Mosaic Ventures. == History == Clue was co-founded by Ida Tin, Hans Raffauf, Mike LaVigne and Moritz von Buttlar in 2012. BioWink GmbH launched the app in 2013. Ida Tin's stated goal was to take female reproductive health “out of taboo land” and to start “a reproductive health revolution.” Tin previously led motorbike tours around the world and wrote a book about her experience. By July 2017, the Clue app had more than 8 million active users on both Android and iOS. Users were representative of more than 180 countries. In 2015, BioWink GmbH closed a $7 million Series A funding round led by Union Square Ventures and Mosaic Ventures, bringing the company's total funding to $10 million. The company was listed as one of Europe's Hottest Startups in 2015 by Wired UK, with Clue being named one of the best apps in 2015 by both Apple and Google. In March 2018, the company launched an editorial site to serve as a resource for accessible and scientific menstrual health information. == Mobile app == The Clue mobile application calculates and predicts a user's period, fertile window, and premenstrual syndrome. It also informs users the most or least likely time for becoming pregnant and allows them to track more than 30 health categories, including sex, sleep, pain, exercise, hair, skin, digestion, emotions and energy. The app can also explain how pill dosages impact fertility and includes an alarm system to allow for reminders for taking pills. In 2015, the company closed a Series A funding round and announced plans to use the proceeds to expand features of the mobile app and hire more staff. Clue also partnered with universities such as Stanford University, Columbia University, University of Washington, and University of Oxford to advance female health research. Clue integrated with Apple Inc.'s HealthKit for iOS 9 in September 2015, allowing data such as body temperature, cervical mucus quality, menstruation, ovulation test results, sexual activity, and spotting directly to the app. In 2016, Clue was available in 15 languages on both iOS and Android. That same year, Clue introduced a cycle-sharing feature and in 2017 a pill-tracking option. In February 2018, Clue made its app available on the Fitbit Ionic smartwatch. In 2026, Clue partnered with UK-based digital healthcare platform Evaro, an NHS-licensed provider, to offer embedded prescription services within the app.
Read more →
FMLLR

In signal processing, Feature space Maximum Likelihood Linear Regression (fMLLR) is a global feature transform that are typically applied in a speaker adaptive way, where fMLLR transforms acoustic features to speaker adapted features by a multiplication operation with a transformation matrix. In some literature, fMLLR is also known as the Constrained Maximum Likelihood Linear Regression (cMLLR). == Overview == fMLLR transformations are trained in a maximum likelihood sense on adaptation data. These transformations may be estimated in many ways, but only maximum likelihood (ML) estimation is considered in fMLLR. The fMLLR transformation is trained on a particular set of adaptation data, such that it maximizes the likelihood of that adaptation data given a current model-set. This technique is a widely used approach for speaker adaptation in HMM-based speech recognition. Later research also shows that fMLLR is an excellent acoustic feature for DNN/HMM hybrid speech recognition models. The advantage of fMLLR includes the following: the adaptation process can be performed within a pre-processing phase, and is independent of the ASR training and decoding process. this type of adapted feature can be applied to deep neural networks (DNN) to replace traditionally used mel-spectrogram in end-to-end speech recognition models. fMLLR's speaker adaptation process leads to a significant performance boost for ASR models, hence outperforming other transform or features like MFCCs (Mel-Frequency Cepstral Coefficients) and FBANKs (Filter bank) coefficients. fMLLR features can be efficiently realized with speech toolkits like Kaldi. Major problem and disadvantage of fMLLR: when the amount of adaptation data is limited, the transformation matrices tends to easily overfit the given data. == Computing fMLLR transform == Feature transform of fMLLR can be easily computed with the open source speech tool Kaldi, the Kaldi script uses the standard estimation scheme described in Appendix B of the original paper, in particular the section Appendix B.1 "Direct method over rows". In the Kaldi formulation, fMLLR is an affine feature transform of the form x {\displaystyle x} → A {\displaystyle A} x {\displaystyle x} + b {\displaystyle +b} , which can be written in the form x {\displaystyle x} →W x ^ {\displaystyle {\hat {x}}} , where x ^ {\displaystyle {\hat {x}}} = [ x 1 ] {\displaystyle {\begin{bmatrix}x\\1\end{bmatrix}}} is the acoustic feature x {\displaystyle x} with a 1 appended. Note that this differs from some of the literature where the 1 comes first as x ^ {\displaystyle {\hat {x}}} = [ 1 x ] {\displaystyle {\begin{bmatrix}1\\x\end{bmatrix}}} . The sufficient statistics stored are: K = ∑ t , j , m γ j , m ( t ) Σ j m − 1 μ j m x ( t ) + {\displaystyle K=\sum _{t,j,m}\gamma _{j,m}(t)\textstyle \Sigma _{jm}^{-1}\mu _{jm}x(t)^{+}\displaystyle } where Σ j m − 1 {\displaystyle \textstyle \Sigma _{jm}^{-1}\displaystyle } is the inverse co-variance matrix. And for 0 ≤ i ≤ D {\displaystyle 0\leq i\leq D} where D {\displaystyle D} is the feature dimension: G ( i ) = ∑ t , j , m γ j , m ( t ) ( 1 σ j , m 2 ( i ) ) x ( t ) + x ( t ) + T {\displaystyle G^{(i)}=\sum _{t,j,m}\gamma _{j,m}(t)\left({\frac {1}{\sigma _{j,m}^{2}(i)}}\right)x(t)^{+}x(t)^{+T}\displaystyle } For a thorough review that explains fMLLR and the commonly used estimation techniques, see the original paper "Maximum likelihood linear transformations for HMM-based speech recognition ". Note that the Kaldi script that performs the feature transforms of fMLLR differs with by using a column of the inverse in place of the cofactor row. In other words, the factor of the determinant is ignored, as it does not affect the transform result and can causes potential danger of numerical underflow or overflow. == Comparing with other features or transforms == Experiment result shows that by using the fMLLR feature in speech recognition, constant improvement is gained over other acoustic features on various commonly used benchmark datasets (TIMIT, LibriSpeech, etc). In particular, fMLLR features outperform MFCCs and FBANKs coefficients, which is mainly due to the speaker adaptation process that fMLLR performs. In, phoneme error rate (PER, %) is reported for the test set of TIMIT with various neural architectures: As expected, fMLLR features outperform MFCCs and FBANKs coefficients despite the use of different model architecture. Where MLP (multi-layer perceptron) serves as a simple baseline, on the other hand RNN, LSTM, and GRU are all well known recurrent models. The Li-GRU architecture is based on a single gate and thus saves 33% of the computations over a standard GRU model, Li-GRU thus effectively address the gradient vanishing problem of recurrent models. As a result, the best performance is obtained with the Li-GRU model on fMLLR features. == Extract fMLLR features with Kaldi == fMLLR can be extracted as reported in the s5 recipe of Kaldi. Kaldi scripts can certainly extract fMLLR features on different dataset, below are the basic example steps to extract fMLLR features from the open source speech corpora Librispeech. Note that the instructions below are for the subsets train-clean-100,train-clean-360,dev-clean, and test-clean, but they can be easily extended to support the other sets dev-other, test-other, and train-other-500. These instruction are based on the codes provided in this GitHub repository, which contains Kaldi recipes on the LibriSpeech corpora to execute the fMLLR feature extraction process, replace the files under $KALDI_ROOT/egs/librispeech/s5/ with the files in the repository. Install Kaldi. Install Kaldiio. If running on a single machine, change the following lines in $KALDI_ROOT/egs/librispeech/s5/cmd.sh to replace queue.pl to run.pl: Change the data path in run.sh to your LibriSpeech data path, the directory LibriSpeech/ should be under that path. For example: Install flac with: sudo apt-get install flac Run the Kaldi recipe run.sh for LibriSpeech at least until Stage 13 (included), for simplicity you can use the modified run.sh. Copy exp/tri4b/trans. files into exp/tri4b/decode_tgsmall_train_clean_/ with the following command: Compute the fMLLR features by running the following script, the script can also be downloaded here: Compute alignments using: Apply CMVN and dump the fMLLR features to new .ark files, the script can also be downloaded here: Use the Python script to convert Kaldi generated .ark features to .npy for your own dataloader, an example Python script is provided:
Read more →
Calais (Reuters product)

Calais is a service created by Thomson Reuters that automatically extracts semantic information from web pages in a format that can be used on the semantic web. Calais was launched in January 2008, and is free to use. The technology is now available via the website of Refinitiv, a provider of financial market data and infrastructure founded in 2018, that is a subsidiary of London Stock Exchange Group. The Calais Web service reads unstructured text and returns Resource Description Framework formatted results identifying entities, facts and events within the text. The service appears to be based on technology acquired when Reuters purchased ClearForest in 2007. The technology has also been used to automatically tag blog articles, and organize museum collections. Calais uses natural language processing technologies delivered via a web service interface.
Read more →
Alipay

Alipay (simplified Chinese: 支付宝; traditional Chinese: 支付寶; pinyin: zhīfùbǎo) is a third-party mobile and online payment platform, established in Hangzhou, China, in February 2004 by Alibaba Group and its founder Jack Ma. In 2015, Alipay moved its headquarters to Pudong, Shanghai, although its parent company Ant Financial remains Hangzhou-based. Alipay overtook PayPal as the world's largest mobile (digital) payment platform in 2013. As of June 2020, Alipay serves over 1.3 billion users and 80 million merchants. According to the statistics of the fourth quarter of 2018, Alipay has a 55.32% share of the third-party payment market in mainland China, and it continues to grow. Along with WeChat, Alipay has been described to be China's super-app with a wide range of functionalities including ridesharing, travel booking and medical appointments. == History == The service was first launched in 2003, by Taobao. The People's Bank of China, China's central bank, issued licensing regulations in June 2010 for third-party payment providers. It also issued separate guidelines for foreign-funded payment institutions. Because of this, Alipay, which accounted for half of China's non-bank online payment market, was restructured as a domestic company controlled by Alibaba CEO Jack Ma in order to facilitate the regulatory approval for the license. The 2010 transfer of Alipay's ownership was controversial, with media reports in 2011 that Yahoo! and Softbank (Alibaba Group's controlling shareholders) were not informed of the sale for nominal value. Chinese business publication Century Weekly criticised Ma, who stated that Alibaba Group's board of directors was aware of the transaction. The incident was criticised in foreign and Chinese media as harming foreign trust in making Chinese investments. The ownership dispute was resolved by Alibaba Group, Yahoo!, and Softbank in July 2011. In 2013, Alipay launched a financial product platform called Yu'e Bao. Alipay partnered with Tianhong Asset Management to launch the it. Yu'e Bao offers an online money market account in which Alipay customers can deposit money and receive a higher interest rate than that available from banks. It soon became China's largest online money market fund and prompted competitors like Baidu and Tencent to introduce alternatives. Alibaba (the parent company of Alipay) reported having 152 million Yu'e Bao users in mid-2016, with 810 billion RMB (US$117 billion) in funds under management. In 2015, Alipay's parent company was re-branded as Ant Financial Services Group. In 2017, Alipay unveiled their facial recognition payment service. In 2020, Alipay upgraded from a payment financial instrument to an open platform for digital life. In 2021, the mandate by the Ministry of Industry and Information Technology (MIIT) to open up the "walled garden" ecosystems of the major tech companies has led to the introduction of interoperability of payment QR codes of Alipay and competing WeChat Pay and UnionPay's Cloud QuickPass platforms. In response to the increase in Alipay's payment volume due to use on Alibaba's e-commerce sites and others, Chinese regulators introduced new rules in 2020. The new rules focused on Alipay because the payment volume exploded due to its use on Alibaba's e-commerce sites and other platforms. By the second quarter in 2020, Alipay held 55.6% of China's third party mobile payment market. The People's Bank of China made rules that required payment firms to place money with regulators and anti-monopoly reviews would be triggered if the amount exceeded 50% market share. The rules included that the People's Bank of China mandate an online-payment clearing route through the NetsUnion Clearing Corporation, a centralized, state-overseen clearing body, and that unused consumer funds be held by a third-party payment provider in a non-interest-bearing account. These measures increased transparency and reduced systemic risk. When Alipay operates outside of China, it must comply with local financial regulations, which may treat specific functions such as money-market funds or investment-linked products. In Singapore, such services may require prior authorization from securities or financial-services regulators before they can be offered to residents. == Services == Alipay states that it operates with more than 65 financial institutions including Visa and MasterCard to provide payment services for Taobao and Tmall as well as more than 460,000 online and local Chinese businesses. Alipay is used in smartphones with their Alipay Wallet app. QR code payment codes are used for local in-store payments. The Alipay app also provides features such as credit card bill payments, bank account managements, P2P transfer, prepay mobile phone top-up, bus and train ticket purchases, food orders, vehicles for hire, insurance selections and a digital identification document storage. Alipay also allows online check-out on most Chinese-based websites such as Taobao and Tmall. The Alipay app allows users to add their own services provided from different companies to create a more personalised experience. Since late 2008, Alipay has promoted public service payment services and has covered more than 300 cities nationwide, supporting more than 1,200 partner organizations. In addition to utility bills such as water and electricity, Alipay also extends their services to areas such as paying transportation fines, property fees, and cable television fees. Common online payment services also include hydropower coal payment, tuition payment and traffic fine. On 15 January 2009, Alipay launched a credit card repayment service, supporting 39 domestic bank-issued credit cards. It is currently the most popular third-party repayment platform. The main advantages are free credit card bills checking, repayments with no administrative fee, as well as automatic repayment, repayment reminders and other value-added services. In the first quarter of 2014, 76% of credit cards were also paid by Alipay Wallet. From December 2013, several chain convenience store companies, including Meiyijia, Hongqi Chain, and Qishiduo C-STORE and 7-Eleven, have successively supported Alipay payment; in December, Beijing taxi drivers began to accept Alipay to pay the fare. Subsequently, Wanda Cinema, Joy City, Wangfujing and other large-scale retail companies as well as movie theaters, KTV, and catering companies have access to Alipay. From 26 March 2019, the service fee will be charged for the payment of credit card through Alipay. Customers only pay the portion of the payment that exceeds 2,000 yuan at 0.1%. In addition to this, in 2019, Walgreens accepted Alipay as payment in 3,000 US stores. Walgreen's products are available to Chinese customers through Alibaba's Tmall online marketplace. The payment application can also be used on Alibaba.com's site and Taobao as a means of payment. A Nielsen report suggests that over 90% of Chinese tourists would be willing to use mobile payment overseas if given the option. Many Chinese tourists do not have international credit cards, and so Alipay is a payment option. Digital payments have become the norm in China as the government pushes a cashless system even in rural and village areas. In November 2019, Alipay introduced Tourpass, a service component that allows non-Chinese users to use its mobile payment feature by pre-loading Chinese Yuan equivalent foreign currency into the app. In 2020, Alipay used a QR code system to help in containing the COVID-19 outbreak. The health code system tags users one of three colors according to their location, basic health information and travel history. "Beauty filters" were included to Alipay's face-scan payment system in a new upgrade that was released in July 2019. The market has responded well to the "beauty filters," which make users seem better when they use the program to make payments. Alipay Tap is a payment function launched by Alipay in July 2024. Alipay+ NFC enables wallets to offer tap-to-pay acceptance across Mastercard's global contactless network, all within your existing wallet infrastructure. == Foreign expansion == Outside of China, more than 300 worldwide merchants use Alipay to sell directly to consumers in China. It currently supports transactions in 18 foreign currencies. Since the launch of Alipay in the Mainland China, Ant Financial introduced a series of expansion of the services to other countries. Other than expanding into individual countries, the system would also be integrated with online payment platform providers. Ant Group had acquired a majority stake into 2C2P, a Singapore-based provider used by merchants worldwide in April 2022, and would eventually integrate Alipay with 2C2P. === Asia === ==== Bangladesh ==== In 2018, Alipay bought 20% shares in Bangladeshi mobile financial service provider bKash Limited. ==== Hong Kong ==== In 2017, Ant Financial expanded to Hong Kong. In a joint venture with CK Hutchison, as Alipay Payment Ser
Read more →
Pixorial

Pixorial was a cloud-based consumer photo sharing, video sharing and video editing platform. The company was formed in 2007 in Centennial, Colorado as a media conversion service. In 2013, Pixorial was chosen as one of two video storage companies to partner with the launch of Google Drive. Pixorial allowed users to edit and share videos on social channels by connecting through their Pixorial account. The company closed on July 18, 2014, and its assets were acquired by LifeLogger Technologies Corp in November 2015. == History == The company was founded in 2007 and launched in 2009 by former Netscape employee Andres Espineira. Changing its focus to video editing software in 2009, Pixorial began developing an app that would be launched for iOS and Android devices in 2011. Later developments in the app in 2012 would also included real time filters, which were later removed. With the launch of Google Drive in 2012, Pixorial was chosen as an integrated video partner. This integration with Google Drive allowed users to access videos stored in Google Drive within the web app of Pixorial. After the Google Drive launch, Pixorial developed a crowdsourced, location-based video sharing app, Krowds. The app was cited in July 2012 by PC Magazine as one of "The 8 Best Apps for Making and Sharing Videos on Your iPhone". In late July, Pixorial replaced its original mobile app with the MyPlayer HD app that optimized HD video viewing for large screen viewing including tablets and smart televisions. Pixorial's services terminated on July 18, 2014. == Products == === Krowds App === Pixorial's app was launched in April 2013 for iOS, and in May for Android, as a tool to aggregate event videos through location based collections. The app was launched to generally positive reviews. === Movie Creator === Launched July 12, 2012 Pixorial's Movie Creator allowed users to edit movies in a simple story-telling platform Movie Creator's features include transitions, text boxes, access to free music tracks, credits, and social media sharing capabilities. The Pixorial platform allowed users to view, share, and edit videos without modifying the original. Movie Creator integrated pictures and video to create user movies. == Awards == 2012 Apex Award from the Colorado Technology Association, for Best Technology Project of the Year 2010 Computerworld Laureate for Media, Arts and Entertainment
Read more →
Enterprise mobile application

The term enterprise mobile application is used in the context of mobile apps created/brought by individual organizations for their workers to carry out the functions required to run the organization. It is the process of building a mobile application for the requirements of an enterprise. An enterprise mobile application belonging to an organization is expected to be used by only the workers of that organization. The definition of enterprise mobile application does not include the mobile apps that an organization create for its customers or consumers of the products or services generated by the organization. == Example == An organization, whether for-profit or non-profit, may create a mobile app for its members to track inventory levels of supplies they distribute to their target communities or materials used in product manufacturing. Such a mobile app comes under the definition of enterprise mobile application. However, the same organization may also create another mobile app to sell their products to end users or spread awareness of their services to various communities, and that mobile app would not come under definition of enterprise mobile application. == Enterprise mobile solution providers == Enterprise Mobile solution providers create and develop apps for individual organizations that can buy instead of creating the apps themselves. Reasons for Organizations buying the apps include time and cost savings, technical expertise. Today Enterprise Mobility is playing track role for enterprise transformation. Today, enterprises needs productivity is a fast way. Enterprise mobility helps business owners to build their work in a progressive way by assisting enterprise mobility solutions.
Read more →
Instance (computer science)

In computer science, an instance or token (from metalogic and metamathematics) is a specific occurrence of a software element that is based on a type definition. When created, an occurrence is said to have been instantiated, and both the creation process and the result of creation are called instantiation. == Examples == Chat AI instance In chat-based AI systems, an assistant can be invoked across many independent conversation sessions (often called a thread), each with its own message history. A specific execution of the assistant over that session may be represented as a run (an execution on a thread). Class instance In object-oriented programming, an object created from a class type. Each instance of a class shares the class-defined structure and behavior but has its own identity and state. Procedural instance In some contexts (including Simula), each procedure call can be viewed as an instance of that procedure—an activation with its own parameters and local variables. Computer instance In cloud computing and virtualization, an instance commonly refers to a provisioned virtual machine or virtual server with an allocated combination of compute, memory, network, and storage resources. Polygonal model In computer graphics, a model may be instanced so it can be drawn multiple times with different transforms and parameters, improving performance by reusing shared geometry data. Program instance In a POSIX-oriented operating system, a running process is an instance of a program. It can be instantiated via system calls such as fork() and exec(). Each executing process is an instance of a program it has been instantiated from.
Read more →
Docic

Docic is a Tunisian digital health platform available as a web and mobile application, headquartered in Tunis, Tunisia. Founded in 2022 by Sami Kallel, an orthopedic surgeon, and Sofiane Trabelsi. The service helps patients and healthcare professionals store, organize, and share medical records digitally and to connect with the doctor online. == History == Docic was founded in 2022 as a health-technology company based in Tunisia, after which the mobile application was subsequently developed and made available to users. The platform was designed to provide healthcare professionals with access to patients’ complete medical history, including updates and recent changes, aiming at supporting clinical decision-making and reducing the risk of medical errors. In January 2025, Docic was listed amongst companies that have received the Startup Act label, which is a recognition under the Tunisian legal framework made to support innovative startups.
Read more →
Oculus Medium

Oculus Medium is a digital sculpting software that works with virtual reality headsets and 6DoF motion controllers. It is used to create and paint digital sculptures. Medium works only on Oculus Rift. It was released on December 5, 2016, following with a major update in 2018 introducing new features and a revamped UI. On December 9, 2019, Oculus Medium was acquired by Adobe and re-named to "Medium by Adobe".
Read more →
BiP (software)

BiP is a freeware instant messaging application developed by Lifecell Ventures Cooperatief U.A., a subsidiary of Turkcell incorporated in the Netherlands. It allows users to send text messages, voice messages and video calling, and it can be downloaded from the App Store, Google Play, and Huawei AppGallery. BiP has over 53 million users worldwide, and was first released in 2013. == Functions == BiP is a secure, and free communication platform. BiP allows making video and audio calls, allows sharing images, videos and location. BiP includes instant translations to 106 languages and exchange rates. President Erdoğan's Communications Office opposed WhatsApp's enforcement of its updated privacy policy and announced that Erdoğan left WhatsApp and opened an account in Telegram and BiP. The Turkish Ministry of National Defense has announced that it will move information groups to BiP for the same reason. == Others == Banglalink announced a BiP messenger partnership in Bangladesh The Communications Office of President Erdoğan opposed WhatsApp's enforcement of its updated privacy policy and announced that Erdoğan left WhatsApp and opened an account in Telegram and BiP. The Turkish Ministry of National Defense has announced that it will move information groups to BiP for the same reason. The CEO of BiP is Burak Akinci. The number of downloads of the app is 80 million globally.
Read more →
Meta-Labeling

Meta-labeling, also known as corrective AI, is a machine learning (ML) technique utilized in quantitative finance to enhance the performance of investment and trading strategies, developed in 2017 by Marcos López de Prado at Guggenheim Partners and Cornell University. The core idea is to separate the decision of trade direction (side) from the decision of trade sizing, addressing the inefficiencies of simultaneously learning both side and size predictions. The side decision involves forecasting market movements (long, short, neutral), while the size decision focuses on risk management and profitability. It serves as a secondary decision-making layer that evaluates the signals generated by a primary predictive model. By assessing the confidence and likely profitability of those signals, meta-labeling allows investors and algorithms to dynamically size positions and suppress false positives. == Motivation == Meta-labeling is designed to improve precision without sacrificing recall. As noted by López de Prado, attempting to model both the direction and the magnitude of a trade using a single algorithm can result in poor generalization. By separating these tasks, meta-labeling enables greater flexibility and robustness: Enhances control over capital allocation. Reduces overfitting by limiting model complexity. Allows the use of interpretability tools and tailored thresholds to manage risk. Enables dynamic trade suppression in unfavorable regimes. == Applications == Meta-labeling has been applied in a variety of financial ML contexts, including: Algorithmic trading: Filtering and sizing trades to reduce false positives. Portfolio optimization: Scaling exposure across multiple signals with differing confidence levels. Risk management: Dynamically disabling strategies in adverse market conditions. Model validation: Interpreting when and why a model may be underperforming due to regime shifts. == General architecture == Meta-labeling decouples two core components of systematic trading strategies: directional prediction and position sizing. The process involves training a primary model to generate trade signals (e.g., buy, sell, or hold) and then training a secondary model to determine whether each signal is likely to lead to a profitable trade. The second model outputs a probability that is interpreted as the confidence in the forecast, which can be used to adjust the position size or to filter out unreliable trades. Meta-labeling is typically implemented as a three-stage process: Primary model (M1): Predicts the direction or label of a financial outcome using features such as market prices, returns, or volatility indicators. A typical output is directional, e.g., Y ∈ {−1,0,1}, representing short, neutral, or long positions. Secondary model (M2): A binary classifier trained to predict whether the primary model's prediction will be profitable. The target variable is a binary meta-label F ∈ { 0 , 1 } {\displaystyle F\in \{0,1\}} . Inputs can include features used in the primary model, performance diagnostics, or market regime data. Position sizing algorithm (M3): Translates the output probability of the secondary model into a position size. Higher confidence scores result in larger allocations, while lower confidence leads to reduced or zero exposure. === Stage 1: Forecasting side === Primary model architecture Figure 1 Figure 1 presents the architecture of a primary model. It focuses on forecasting the side of the trade. Following the example, this model (M1) takes in input data – such as open-high-low-close data and determines the side of the position to take: a negative number is a short position, and positive number is a long position, the range is set between −1 and 1 (the closer it is to −1 or 1, the stronger the models conviction is). When training the model, the labels are −1 and 1, based on the direction of forward returns for some predefined investment horizon. The researcher may decide to apply a recall check (τ: "Tau") by setting a minimum threshold that the initial output needs to be to qualify of a short or long position (if the threshold is not met, no side forecast is predicted, leading to closing of any open positions), this leads to the primary model output which is one of three possible side forecasts: −1, 0, or 1. The primary model also generates evaluation data which can be used by the secondary model, to improve performance of size forecasts. Some examples of evaluation data include rolling accuracy, F1, recall, precision, and AUC scores. === Stage 2: Filtering out false positives === General meta-labeling architecture Figure 2 Next comes the phase of filtering out false positives, by applying a secondary machine learning model (M2), which is a binary classifier trained to determine if the trade will be profitable or not. The model takes as input four general groupings of data: General input data which is predictive of a false positive. For example the last 30 days rolling volatility of the underlying asset. Evaluation data. Market state and regime data, one may find that macro economic data or clustering the market into regimes may help as specific trading strategies are known to perform better in particular regimes. Example: momentum based strategies perform best in periods with low volatility and strong directional moves. Primary models initial input which is a value between −1 and 1. This highlights the strength of the primary models conviction. The output of the model is a value between −1 and 1 (if using a Tanh function) which will indicate the strength of the conviction that a short or long position is profitable, or it could simply be between 0 and 1 (using a sigmoid function) if one only wanted to know if it made money or not. This output allows filtering out trades that are likely to lead to losses. One could stop at this point or use the outputs of the secondary model as inputs to a position sizing algorithm (M3) which could further enhance strategy performance metrics by translating the output probability of the secondary model into a position size. Higher confidence scores result in larger allocations, while lower confidence leads to reduced or zero exposure. === Stage 3: Optimizing position sizes === ==== Position sizing methods (M3) ==== Various algorithms have been proposed for transforming predicted probabilities into trade sizes: All-or-nothing: Allocate 100% of capital if the probability exceeds a predefined threshold (e.g., 0.5); otherwise, do not trade. Model confidence: Use the probability score directly as the fraction of capital allocated. Linear scaling: Rescale the model's probabilities using min-max normalization based on the training data. Normal CDF (NCDF): Use a normal cumulative distribution function applied to a z-statistic derived from the predicted probability. Empirical CDF (ECDF): Rank probabilities based on their percentile in the training data to ensure relative allocation. Sigmoid Optimal Position Sizing (SOPS): Applies a smooth non-linear sigmoid transformation optimized to maximize risk-adjusted returns (Sharpe ratio). ==== Model calibration ==== Each machine learning algorithm used in meta-labeling tends to produce outputs with different characteristic distributions; for example, some are approximately normally distributed, whereas others exhibit a pronounced U-shape, concentrating probabilities near the extremes. Due to these varying distributions, simply summing the outputs of different models can inadvertently lead to uneven weighting of signals, biasing trade decisions. To address this, model calibration techniques are essential to adjust the predicted probabilities towards frequentist probabilities, ensuring that model outputs reflect true likelihoods more accurately. Two common calibration techniques are: Platt scaling (Sigmoid scaling): Suitable for correcting S-shaped calibration plots typically produced by models such as support vector machines (SVMs). Isotonic regression: Fits a non-decreasing step function to probabilities and is effective particularly with larger datasets, though it can sometimes lead to overfitting. Transforming predictions to frequentist probabilities is crucial as it provides probabilistic outputs that are directly interpretable as the actual likelihood of an event occurring. Such calibration significantly enhances the effectiveness of fixed position sizing methods, reducing maximum drawdowns and increasing risk-adjusted returns. However, calibration has less impact on position sizing methods that directly estimate parameters from the training data, such as ECDF and SOPS, suggesting that calibration is a critical step mainly for fixed methods that rely heavily on raw model outputs. =
Read more →
Voice search

Voice search, also called voice-enabled search, allows the user to use a voice to search the Internet, a website, or an app. In a broader definition, voice search includes open-domain keyword query on any information on the Internet, for example in Google Voice Search, Cortana, Siri and Amazon Echo. Voice search is often interactive, involving several rounds of interaction that allows a system to ask for clarification. Voice search is a type of dialog system. Voice search is not a replacement for typed search. Rather the search terms, experience and use cases can differ heavily depending on the input type. == Supported language == Language is the most essential factor for a system to understand, and provide the most accurate results of what the user searches. This covers across languages, dialects, and accents, as users want a voice assistant that both understands them and speaks to them understandably. While spoken and written languages differ, voice search should support natural spoken language instead of only transforming voice into text and doing a regular text search with the help speech recognition. For example, in typed search an eCommerce user can easily copy and paste an alphanumeric product code to search field, but when speaking the search terms can be very different, such as "show me the new Bluetooth headphones by Samsung". == How it works == The difference between text and voice search is not only the input type. The mechanism must include an automatic speech recognition (ASR) for input, but it can also include natural language understanding for natural spoken search queries such as "What's the population for the United States" It can include text-to-speech (TTS) or a regular display for output modalities. Users might sometimes be required to activate the search by using a wake word. Then, the search system will detect the language spoken by the user. It will then detect the keywords and context of the sentence. Lastly, the device will return results depending on its output. A device with a screen might display the results, while a device without a screen will speak them back to the searcher.
Read more →
Enterprise mobile application

The term enterprise mobile application is used in the context of mobile apps created/brought by individual organizations for their workers to carry out the functions required to run the organization. It is the process of building a mobile application for the requirements of an enterprise. An enterprise mobile application belonging to an organization is expected to be used by only the workers of that organization. The definition of enterprise mobile application does not include the mobile apps that an organization create for its customers or consumers of the products or services generated by the organization. == Example == An organization, whether for-profit or non-profit, may create a mobile app for its members to track inventory levels of supplies they distribute to their target communities or materials used in product manufacturing. Such a mobile app comes under the definition of enterprise mobile application. However, the same organization may also create another mobile app to sell their products to end users or spread awareness of their services to various communities, and that mobile app would not come under definition of enterprise mobile application. == Enterprise mobile solution providers == Enterprise Mobile solution providers create and develop apps for individual organizations that can buy instead of creating the apps themselves. Reasons for Organizations buying the apps include time and cost savings, technical expertise. Today Enterprise Mobility is playing track role for enterprise transformation. Today, enterprises needs productivity is a fast way. Enterprise mobility helps business owners to build their work in a progressive way by assisting enterprise mobility solutions.
Read more →