AI Face Mix

AI Face Mix — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

• 

  BevQ

  BevQ is a queue management mobile application developed by Faircode Technologies of Kochi, Kerala. It is provided by the Kerala State Beverages Corporation under Government of Kerala. == History == This app was released together by the Government of Kerala and the Kerala State Beverages Corporation in order to implement social distancing in the liquor stores Kerala in the case of the COVID-19 pandemic in Kerala and to reduce the congestion of people. The BevQ App was released by Faircode Technologies on 27 May 2020 on the Google Play Store. In January 2021, the app was withdrawn as bars had opened. In June 2021, there was a commitment from the Kerala CM that the App will be relaunched again. It has been reported that over 132,000 new users downloaded the app in the 48 hours after the announcement. == Achievements == The BEVQ app, which works only in the state of Kerala, beat all other Indian food and drink apps in 2020 to see the highest growth in year-on-year sessions, according to the State of Mobile 2021 report by App Annie. The app even beat the likes of Domino’s, which is used all across India. Around 300 government Liquor shops and 900 private liquor shops were enlisted in the platform. More than 200 million unique users registered in the platform. About 250,000 tokens were given out a day.

  Read more →
• 

  IEBus

  IEBus (Inter Equipment Bus) is a communication bus specification "between equipments within a vehicle or a chassis" of Renesas Electronics. It defines OSI model layer 1 and layer 2 specification. IEBus is mainly used for car audio and car navigations, which established de facto standard in Japan, though SAE J1850 is major in United States. IEBus is also used in some vending machines, which major customer is Fuji Electric. Each button on the vending machine has an IEBus ID, i.e. has a controller. Detailed specification is disclosed to licensees only, but protocol analyzers are provided from some test equipment vendors. Its modulation method is PWM (Pulse-Width Modulation) with 6.00 MHz base clock originally, but most of automotive customers use 6.291 MHz, and physical layer is a pair of differential signalling harness. Its physical layer adopts half-duplex, asynchronous, and multi-master communication with carrier-sense multiple access with collision detection (CSMA/CD) for medium access control. It allows for up to fifty units on one bus over a maximum length of 150 meters. Two differential signalling lines are used with Bus+ / Bus− naming, sometimes labeled as Data(+) / Data(−). It is sometimes described as "IE-BUS", "IE-Bus," or "IE Bus," but these are incorrect. In formal, it is "IEBus." IEBus® and Inter Equipment Bus® are registered trademark symbols of Renesas Electronics Corporation, formerly NEC Electronics Corporation, (JPO: Reg. No.2552418 and 2552419, respectively). == History == In the middle of '80s, semiconductor unit of NEC Corporation, currently Renesas Electronics, started the study for increasing demands for automotive audio systems. IEBus is introduced as a solution for the distributed control system. In the late 1980s, several similar specifications, including the Domestic Digital Bus (D2B), the Japanese Home Bus (HBS), and the European Home System (EHS) are proposed by different companies or organizations. These were once discussed as IEC 61030, but it was withdrawn in 2006. IEBus is also a similar specification (refer to "Transfer signal format" section), but not listed in these criteria. As the result, IEBus becomes a de facto standard of car audio in Japan. Regarding the Domestic Digital Bus (D2B), it is re-defined as D2B Optical by Mercedes-Benz independently. As for Japanese Home Bus System (HBS), it is defined in 1988 as Home Bus System Standard Specification, ET-2101 by JEITA and REEA (Radio Engineering & Electronics Assiation) in Japan. It is being used by several Japanese air conditioner manufacturers (for example, M-Net from Mitsubishi and the P1/P2 or F1/F2 bus from Daikin). Fujitsu provided HBPC (Home Bus Protocol Controller) chip as MB86046B. But it is unclear whether Fujitsu (currently, Cypress) still manufactures this HBPC LSI as of 2018. Mitsumi Electric provides the MM1007 and MM1192 driver ICs for HBS. The HBS specification is also discussed in the Echonet Consortium. In 2014, a utility model patent for protocol converter from HBS to RS-485 is granted in China as "CN204006496U." Regarding the replacement of IEBus, a paper by Hyundai Autonet, currently Hyundai Mobis, describes as follows. "In communication methods for digital input capable amplifiers, Inter Equipment Bus (IEBus) was used in early times, but for now, Controller Area Network (CAN) is mainly used." == Protocol overview == A master talks to a slave. Each unit has a master and a slave address register. Only one device can talk on the bus at any given time. There is a pecking order for the types of communications which will take precedence over another. Each communication from master to slave must be replied to by the slave going back to the master with acknowledge bits each of those show ACK or NAK. If the master does not receive the ACK within a predefined time allowance for a mode, it drops the communication and returns to its standby (listen) mode. Detailed specification of OSI model layer 2 is disclosed to licensees only, but protocol analyzers are provided from some test equipment vendors. In 2012, one of Chinese manufacturer's patent is granted as "CN202841169U". An open-source software emulator called "IEBus Studio" exists on a repository of SourceForge, but the last update was on 2008-02-24. Another open-source analyzer software called "IEBusAnalyzer" is available on GitHub repository. Some hobbyist made some tools also. === Physical layer (OSI model layer 1) specification overview === From μPD6708 data sheet. and μPD78098B Subseries user's manual, hardware. Communication system Half-duplex asynchronous communication Multi-master system All the units connected to the IEBus can transfer data to the other units. Broadcast communication function (communication between one unit and multiple units) Normally, communication is individually carried out from one unit to another. By using the broadcast communication function, however, communication can be executed from one unit to plural units as follows: Group broadcast communication: Broadcast communication to group units Simultaneous broadcast communication: Broadcast communication to all units Effective transmission rate The effective transmission rate can be selected from the following three communication modes: Mixture of the plural of modes in the same bus line is not allowed. Correct communication between different base clock is not possible. Access control CSMA/CD (Carrier Sense Multiple Access with Collision Detection) The priority of occupying IEBus is as follows: «1» Broadcast communication takes precedence over individual communication. «2» The lower the master address, the higher the priority. Communication scale Number of units: 50 MAX. Cable length: 150 m MAX. (when a twisted pair cable is used) Load capacity: MAX. 8000 pF; between Bus+ and Bus−, (6.000000 MHz base clock) MAX. 7100 pF; between Bus+ and Bus−, (6.291456 MHz base clock) Terminating resistor: 120 Ω Logic level Logic 1: Low level. Voltage difference between Bus+ and Bus− is under 20mV Logic 0: High Level. Voltage difference between Bus+ and Bus− is over 120mV In-phase input voltage high: Bus+ ≤ (VDD-1.0) V, Bus− ≥ 1.0 V === Transfer signal format === From μPD6708 data sheet. and μPD78098B Subseries user's manual, hardware. This frame format is much similar to that of Domestic Digital Bus (D2B). All fields are MSB first. ==== Functions of Control bits ==== === Bit format === Each IEBus bit consists of four periods. Preparation period: The first or subsequent low-level (logic "1") period Synchronization period: Next high-level (logic "0") period Data period: Period indicating value of bit; ether low-level (logic "1") or high-level (logic "0") Stop period: The last low-level (logic "1") period Synchronization is done by each bit. Time lengths of the synchronization period and data period are almost the same. The time of the entire bits' and each bit's specification, related to the time of each period allocated to it, differ depending both on the type of the transmit bit and on whether the unit is the master or a slave unit. == Automotive manufacturers using IEBus == Each manufacturer has its own name, but it is not an alias of IEBus. Those are specifications of wire harness which comprise control cables based on IEBus, OSI model layer 3 and above communication protocol, audio cables, interconnection couplers, and so on. === Pioneer === Pioneer Corporation employed IEBus for its original branded car audio in early '90s. In its earlier stage, it was used just for control bus between the head unit in dashboard and the CD changer usually placed in trunk room. Nowadays, the specification includes connection between head units, navigation systems, rear speaker systems, and so on. IP-Bus: Wire harness specification. === Toyota === Pioneer Corporation pushed Toyota Motor Corporation to adopt IEBus as the genuine parts. In 1994, Toyota decided to employ IEBus for its genuine specification, but it is slightly different from that of Pioneer. It is named as AVC-LAN. AVC-LAN: Wire harness specification, based on mode 2. === Honda/Acura === Pioneer Corporation also pushed Honda Motor. Honda also decided to adopt IEBus as its genuine parts specification just after Toyota do so. GA-NET II: Wire harness specification. Honda Music Link: Honda genuine gadget to connect Apple Inc. products. A hobbyist made touch screen controller on Acura TSX for a Car PC installed in the trunk. === Sirius XM Satellite Radio === Sirius XM Satellite Radio is a satellite broadcasting radio operator in US. Its digital media receiver equipment utilizes IEBus. == Evaluation boards == === SAKURA board === GR-SAKUKRA board and GR-SAKURA-FULL board are Renesas official promotion boards of RX63N chip, which enables IEBus mode 0 and 1, but not mode 2, i.e. not available for Toyota AVC-LAN. They are an Arduino pin compatible low-price ones, suitable for hobbyists. Their color of printed circuit board is SAKURA in Japanese, which means cherry blossom. To e

  Read more →
• 

  Data definition specification

  In computing, a data definition specification (DDS) is a guideline to ensure comprehensive and consistent data definition. It represents the attributes required to quantify data definition. A comprehensive data definition specification encompasses enterprise data, the hierarchy of data management, prescribed guidance enforcement and criteria to determine compliance. == Overview == A data definition specification may be developed for any organization or specialized field, improving the quality of its products through consistency and transparency. It eliminates redundancy (since all contributing areas are referencing the same specification) and provides standardization and degrees of compliance, making it easier and more efficient to create, modify, verify, analyze and share information across the enterprise. To understand how a data definition specification works in an enterprise, we must look at the elements of a DDS. Writing data definitions, defining business terms (or rules) in the context of a particular environment, provides structure for an organization's data architecture. In developing these definitions, the words used must be traceable to clearly defined data. A data definition specification may be used in the following activities: Business intelligence Business process modeling Business rules management Data analysis and modeling Information architecture Metadata modeling Data mastering Report generation == Criteria == A data definition specification requires data definitions to be: Atomic – singular, describing only one concept. Commonly used and ambiguous terms should be defined. While a term refers to one concept, several words may be used in a term: File – A concept identifiable with one word File extension – A concept identifiable with more than one word Traceable – Mapped to a specific data element. In business, a term may be traced to an entity (for example, a customer) or an attribute (such as a customer's name). A term may be a value in a data set (such as gender), or designate the data set itself. Traceability indicates relationships in the data hierarchy. Consistent - Used in a standard syntax; if used in a specific context, the context is noted Accurate - Precise, correct and unambiguous, stating what the term is and is not Clear - Readily understood by the reader Complete - With the term, its description and contextual references Concise - To avoid circular references == Applications == === Enterprise data === A data definition specification was produced by the Open Mobile Alliance to document charging data. The document, the centralized catalog of data elements defined for interfaces, specifies the mapping of these data elements to protocol fields in the interfaces. Created for the exchange of financial data, Market Data Definition Language (MDDL) is an XML specification designed to enable the interchange of information necessary to account, to analyze, and to trade financial instruments of the world's markets. It defines an XML-based interchange format and common data dictionary on the fields needed to describe: (1) financial instruments, (2) corporate events affecting value and tradability, and (3) market-related, economic and industrial indicators. The principal function of MDDL is to allow entities to exchange market data by standardizing formats and definitions. MDDL provides a common format for market data so that it can be efficiently passed from one processing system to another and provides a common understanding of market data content by standardizing terminology and by normalizing the relationships of various data elements to one another ... From the user perspective, the goal of MDDL is to enable users to integrate data from multiple sources by standardizing both the input feeds used for data warehousing (i.e., define what's being provided by vendors) and the output methods by which client applications request the data (i.e., ensure compatibility on how to get data in and out of applications)." === Clinical submissions === The Clinical Data Interchange Standards Consortium, a global, multidisciplinary, non-profit organization, has established standards to support the acquisition, exchange, submission and archiving of clinical research data and metadata. CDISC standards are vendor-neutral, platform-independent and freely available from the CDISC website. The Case Report Tabulation Data Definition Specification (define.xml) draft version 2.0, the oldest data definition specification, is part of the evolution from the 1999 FDA electronic submission (eSub) guidance and electronic Common Technical Document (eCTD) documents specifying that a document describing the content and structure of included data be included in a submission. Define.xml was developed to automate the review process by generating a machine-readable data-definition document. Define.xml has standardized submissions to the Food and Drug Administration, reducing review times from over two years to several months. === Archival data === A data definition specification is the foundation of metadata for scientific data archiving. The Metadata Encoding and Transmission Standard (METS) uses one principle of a DDS: consistent use of key terms to catalog digital objects for global use. The METS schema is a flexible mechanism for encoding descriptive, administrative and structural metadata for a digital library object and expressing complex links between metadata, and can provide a useful standard for the exchange of digital-library objects between repositories. A similar effort is underway to preserve complex data associated with video-game archiving. Preserving Virtual Worlds attempted to address archival-format deficiencies, citing the lack of suitable documentation for interactive fiction and games at the bit level: specifically, the absence of "representation information" needed to map raw bits into higher-level data constructs. Preserving Virtual Worlds 2 is a research project expanding on initial efforts in this field.

  Read more →
• 

  Social media and identity

  Social media can have both positive and negative impacts on a user's identity. Scholars within the fields of psychology and communication study the relationship between social media and identity in order to understand individual behavior, psychological impacts, and social patterns. Communication within political or social groups online can result in practice application, real-world implementation of a concept, of those found identities or the adoption of them as a whole. Young people, defined as emerging adults in or entering college, are especially found to have their identities shaped through social media. Sometimes it seems as though social media is taking over and changing us for the worse. Social media is always changing and can be hard to keep up with. Platforms come and go trends change everyday. What was cool yesterday is lame today. The biggest change from recent years that users are still adjusting to is the name change of Twitter now called X. Since Elon Musk purchased the platform he changed the name but nothing else about the app. Users now feel the need to explain when talking about X. Now it is often referred to as ‘X(Twitter)’ to clarify. == Social Media Usage and Demographics == We know what social media is and how it is used but who uses it? The Pew Research center conducted a 10 year study from 2005-2015 about the demographics of social media usage. While this article is 10 years old the statistics in it are from a very formative time in social media. This is when most people joined and were consistently using social media. Age: While it is no surprise that 90% of young adults use social media they are the main demographic of users. Older adults (65 and older) really hit a boom on social media. In 2005 only 2% of older adults used any form of social media. By 2015 35% of older adults used social media. We can infer that that percentage has grown even more since 2015. Gender: It is known that women tend to use social media more than men. In 2015 it was noted that 65% of women used social media. Men were not far behind, 62% of men were reported to use social media. There are no notable differences of users from various races and ethnicities. The research also shows that more suburban and urban residents use social media over those who live in rural areas. == Young adults == Young adults are especially influenced by social media, where they find social groups to belong to. Research shows that nearly half of teens believe social media platforms has a negative impact on people their age. Psychologists believe that at a time when young adults are coming into adolescence, they are more likely to be influenced by what they see on sites like Instagram or Twitter. Most young adults will widely share, with varying degrees of accuracy, honesty, and openness, information that in the past would have been private or reserved for select individuals. Key questions include whether they accurately portray their identities online and whether the use of social media might impact young adults' identity development. Media Imagery, in particular, is said to be a major influence on the minds of young men and women. Studies have shown that it is even more relevant when it comes to the issue of body image. Social media, in part, has been created to host a safe haven for those who do not claim a solid identity in the material world, but past identities are not easy to escape from since the Internet preserves much of the information that was shared. Social media is an essential part of the social lives of young adults. They rely on it to maintain relationships, create new relationships, and stay up to date with the world around them. Adolescents find social media to be extremely helpful when changing environments, like moving off to university for example. Social media provides students, especially first year students, the opportunity to create the identity they want the world to see. However, it has been seen that these students create online personas that may not reflect their true selves bringing up the issues of impression management. Social media provides young adults with the opportunity to present themselves as something other than their authentic self. Social media providers can help build relationships and community on their platforms. This is something that will create a more positive impact from social media. When young adults interact with each other using social media they are creating something called a social self-identity. Social self identity is what individuals create when they assimilate to being in a group. Social media has gained the reputation of being isolating. If these platforms encourage community then they can help grow users' social self-identity. == Media literacy == The definition of media literacy has evolved over time to encompass a range of experiences that can occur in social media or other digital spaces. The definition of media literacy is also broad and wide ranging in its context. Currently, media literacy is the idea that one is able to analyze, evaluate, and interact with media content in a meaningful way. Educators teach media literacy skills because of the vulnerable relationship that young adults can have with social media. Some examples of media literacy practices, particularly on Twitter, include using hashtags, live tweeting, and sharing information. One of the overall goals of media literacy within the context of social media is to keep young adults aware of potentially violent, graphic, or dangerous content that they may come across on the internet, and how to determine if the content is credible while engaging responsibly with it. In order to be considered media-literate, a person must be able to take in media from online and social platforms and have the correct competencies and context to be able to organize the information. In order to be considered media-literate, the digital information must be given to the user in a way that it can be put into the correct perspective and analyzed, deducted and synthesized.Teenagers and young adults can be vulnerable to specific content online outside of their age-range. Media literacy campaigns and education research shows that targeting those who fall into this age category would be the best way to understand and target their needs as young online users. There are multiple individual studies investigating social media identity relating to media literacy online, however there is a need for much more conclusive information that analyzes multiple studies at a time. Social media literacy is still considered an under-researched topic. Many scholars in media literacy research emphasize the impact of training young adults to consume media in a safe way is the major solution for furthering internet education in children and young adults. The more information the young adults are given on media literacy, the better prepared they are to enter the digital world confidently. One scientific model that has been proposed, known as The Social Media Literacy (SMILE) model is a framework that hypothesizes that at the core of this model it is helping young adults truly know the meaning and display the actions of media literacy online. SMILE is also meant to inspire more research on the subject of media literacy as it relates to social media effects and young adult learning abilities. The model was applied through the lens of a social media positivity bias among adolescents and puts forth five different assumptions about social media and media literacy; Social media literacy as a moderator (what is seen on social media) Social media literacy as a predictor (what is seen for specific individuals on social media) Media literacy within social media is a reciprocal process The development of social media literacy depends on a conditional process of variables affecting other variables Media literacy within social media is a differential learning process, and who teaches it is highly affective of the outcome This model also stresses that human beings learn media literacy (and social media literacy) naturally as they go through life. Research suggests that having young adults taught media literacy from an educator may make them less interested (and therefore less careful) of threats on social media. == Self Presentation == People create images of themselves to present to the public, a process called self presentation. Depending on the demographic, presenting oneself as authentic can result in identity clarity. Methods of self presentation can also be influenced by geography. The framework for this relationship between a user's location and their social media presentation is called the spatial self. Users depict their spatial self in order to include their physical space as a part of their self presentation to an audience. According to a 2018 research paper, patients of plastic surgeons have gone in and asked for specific snapchat "filter" features. This led to a theory of Snap

  Read more →
• 

  Feature engineering

  Feature engineering is a preprocessing step in supervised machine learning and statistical modeling which transforms raw data into a more effective set of inputs. Each input comprises several attributes, known as features. By providing models with relevant information, feature engineering significantly enhances their predictive accuracy and decision-making capability. Beyond machine learning, the principles of feature engineering are applied in various scientific fields, including physics. For example, physicists construct dimensionless numbers such as the Reynolds number in fluid dynamics, the Nusselt number in heat transfer, and the Archimedes number in sedimentation. They also develop first approximations of solutions, such as analytical solutions for the strength of materials in mechanics. == Clustering == One of the applications of feature engineering has been clustering of feature-objects or sample-objects in a dataset. Especially, feature engineering based on matrix decomposition has been extensively used for data clustering under non-negativity constraints on the feature coefficients. These include Non-Negative Matrix Factorization (NMF), Non-Negative Matrix-Tri Factorization (NMTF), Non-Negative Tensor Decomposition/Factorization (NTF/NTD), etc. The non-negativity constraints on coefficients of the feature vectors mined by the above-stated algorithms yields a part-based representation, and different factor matrices exhibit natural clustering properties. Several extensions of the above-stated feature engineering methods have been reported in literature, including orthogonality-constrained factorization for hard clustering, and manifold learning to overcome inherent issues with these algorithms. Other classes of feature engineering algorithms include leveraging a common hidden structure across multiple inter-related datasets to obtain a consensus (common) clustering scheme. An example is Multi-view Classification based on Consensus Matrix Decomposition (MCMD), which mines a common clustering scheme across multiple datasets. MCMD is designed to output two types of class labels (scale-variant and scale-invariant clustering), and: is computationally robust to missing information, can obtain shape- and scale-based outliers, and can handle high-dimensional data effectively. Coupled matrix and tensor decompositions are popular in multi-view feature engineering. == Predictive modelling == Feature engineering in machine learning and statistical modeling involves selecting, creating, transforming, and extracting data features. Key components include feature creation from existing data, transforming and imputing missing or invalid features, reducing data dimensionality through methods like Principal Components Analysis (PCA), Independent Component Analysis (ICA), and Linear Discriminant Analysis (LDA), and selecting the most relevant features for model training based on importance scores and correlation matrices. Features vary in significance. Even relatively insignificant features may contribute to a model. Feature selection can reduce the number of features to prevent a model from becoming too specific to the training data set (overfitting). Feature explosion occurs when the number of identified features is too large for effective model estimation or optimization. Common causes include: Feature templates - implementing feature templates instead of coding new features Feature combinations - combinations that cannot be represented by a linear system Feature explosion can be limited via techniques such as regularization, kernel methods, and feature selection. == Automation == Automation of feature engineering is a research topic that dates back to the 1990s. Machine learning software that incorporates automated feature engineering has been commercially available since 2016. Related academic literature can be roughly separated into two types: Multi-relational Decision Tree Learning (MRDTL) uses a supervised algorithm that is similar to a decision tree. Deep Feature Synthesis uses simpler methods. === Multi-relational Decision Tree Learning (MRDTL) === Multi-relational Decision Tree Learning (MRDTL) extends traditional decision tree methods to relational databases, handling complex data relationships across tables. It innovatively uses selection graphs as decision nodes, refined systematically until a specific termination criterion is reached. Most MRDTL studies base implementations on relational databases, which results in many redundant operations. These redundancies can be reduced by using techniques such as tuple id propagation. === Open-source implementations === There are a number of open-source libraries and tools that automate feature engineering on relational data and time series: featuretools is a Python library for transforming time series and relational data into feature matrices for machine learning. MCMD: An open-source feature engineering algorithm for joint clustering of multiple datasets. OneBM or One-Button Machine combines feature transformations and feature selection on relational data with feature selection techniques. OneBM helps data scientists reduce data exploration time allowing them to try and error many ideas in short time. On the other hand, it enables non-experts, who are not familiar with data science, to quickly extract value from their data with a little effort, time, and cost. getML community is an open source tool for automated feature engineering on time series and relational data. It is implemented in C/C++ with a Python interface. It has been shown to be at least 60 times faster than tsflex, tsfresh, tsfel, featuretools or kats. tsfresh is a Python library for feature extraction on time series data. It evaluates the quality of the features using hypothesis testing. tsflex is an open source Python library for extracting features from time series data. Despite being 100% written in Python, it has been shown to be faster and more memory efficient than tsfresh, seglearn or tsfel. seglearn is an extension for multivariate, sequential time series data to the scikit-learn Python library. tsfel is a Python package for feature extraction on time series data. kats is a Python toolkit for analyzing time series data. === Deep feature synthesis === The deep feature synthesis (DFS) algorithm beat 615 of 906 human teams in a competition. == Feature stores == The feature store is where the features are stored and organized for the explicit purpose of being used to either train models (by data scientists) or make predictions (by applications that have a trained model). It is a central location where you can either create or update groups of features created from multiple different data sources, or create and update new datasets from those feature groups for training models or for use in applications that do not want to compute the features but just retrieve them when it needs them to make predictions. A feature store includes the ability to store code used to generate features, apply the code to raw data, and serve those features to models upon request. Useful capabilities include feature versioning and policies governing the circumstances under which features can be used. Feature stores can be standalone software tools or built into machine learning platforms. == Alternatives == Feature engineering can be a time-consuming and error-prone process, as it requires domain expertise and often involves trial and error. Deep learning algorithms may be used to process a large raw dataset without having to resort to feature engineering. However, deep learning algorithms still require careful preprocessing and cleaning of the input data. In addition, choosing the right architecture, hyperparameters, and optimization algorithm for a deep neural network can be a challenging and iterative process.

  Read more →
• 

  Social film

  A social film is a type of interactive film that is presented through the lens of social media. A social film is distributed digitally and integrates with a social networking service, such as Facebook or YouTube. It combines features of web video, social network games and social media. == Key elements == Social films are a more recent phenomenon, and, in turn, there are few precedents for their format. Although there are not many examples of this genre of film, the medium has certain identifiable elements: Casual entertainment Social media User-generated content Game mechanics Using just one of these factors or a combination of them, a social film engages viewers to interact directly with the work. This can be done through usual social media functionality like comments and ranking or adding directly to the narrative itself. Just as with memes, social film distribution relies on the viral spread enabled by social media. This is based on the viral expansion loops model, in which a viewer benefits from sharing the application with friends, exponentially creating new viewers compelled to share the application. == History == One of the first social films to be created was from the YouTube channel lonelygirl15. This social film started in 2006 and was created by Miles Beckett , Mesh Flinders, and Greg Goodfried. They used YouTube posts to create an interactive video series about a fictional character who showcased her life in a vlog format. As the videos went on, more bizarre things would keep happening to the main character, Bree, before she just stopped uploading. This channel was not only the first viral social film, but went on to be one of the first viral YouTube channels to be created. It did take a few years to see any more films in this genre, but 2011 saw many people start to try their hand at making these films. The first social film in this year was a film called Him, Her and Them which was produced and released by Murmur in April 2011. It was distributed exclusively through Facebook and promoted as the first “Facebook film.” The film is composed of short video clips and interactive slideshows, integrating Facebook's Social Graph API. Users participate via text-based additions to the story, which are viewable only by friends within their social network. In May 2011, Canon and Ron Howard teamed up to create Project Imagin8ion, which was a photo contest where photographers submitted photos and the top 8 photos would be the inspiration for a short film. This short film was called "When You Find Me" and could be found exclusively on YouTube. In July 2011, Intel and Toshiba partnered together to create Hollywood's first Social Film experience, a thriller called Inside, directed by D.J. Caruso and starring Emmy Rossum. The project is broken up into several segments across multiple social media platforms including Facebook, YouTube, and Twitter. In this instance, the audience is challenged to help Emmy Rossum's character, Christina, safely make it out of the room she's been trapped in. This particular form of social film is a major undertaking in that it combines social media activity with A-list acting talent to create a user experience that all happens in real time. Although not quite the same idea, Hollywood also started experimenting with the idea of interactive and crowd-sourced films. One of the first examples of this was a short film called "Life In A Day" directed by Kevin Macdonald and produced by Ridley Scott. Kevin asked people from all over the world to submit videos onto YouTube of what they were doing on July 24th, 2010. They combined all of the best videos that were submitted together to create one film of people doing different things all around the world, no matter how boring or simple those things seemed. They took this short to film festivals before releasing it to the public on YouTube in 2011. In August 2012, Intel and Toshiba partnered again to create The Beauty Inside, directed by Drake Doremus, starring Mary Elizabeth Winstead and Topher Grace. It's Hollywood's first social film that gives everyone in the audience a chance to play Alex, the lead role. The experience will be broken up into six filmed episodes interspersed with real-time interactive storytelling that all takes place on Alex's Facebook timeline. In August 2013, Intel and Toshiba released their third entry into the category, The Power Inside, directed by Will Speck and Josh Gordon and starring Harvey Keitel, Analeigh Tipton, and Craig Roberts. It's Hollywood's first social film that asks the audience to audition to help save or destroy the world. The experience is broken up into six filmed episodes interspersed with user-generated content and interactive storytelling on the main character's Facebook timeline. In 2015, Intel partnered with Dell for their fourth entry, What Lives Inside directed by Robert Stromberg and starring Colin Hanks, Catherine O'Hara, and J. K. Simmons. The first of four episodes was released on Hulu on March 25, 2015.

  Read more →
• 

  White-box cryptography

  In cryptography, the white-box model refers to an extreme attack scenario, in which an adversary has full unrestricted access to a cryptographic implementation, most commonly of a block cipher such as the Advanced Encryption Standard (AES). A variety of security goals may be posed (see the section below), the most fundamental being "unbreakability", requiring that any (bounded) attacker should not be able to extract the secret key hardcoded in the implementation, while at the same time the implementation must be fully functional. In contrast, the black-box model only provides an oracle access to the analyzed cryptographic primitive (in the form of encryption and/or decryption queries). There is also a model in-between, the so-called gray-box model, which corresponds to additional information leakage from the implementation, more commonly referred to as side-channel leakage. White-box cryptography is a practice and study of techniques for designing and attacking white-box implementations. It has many applications, including digital rights management (DRM), pay television, protection of cryptographic keys in the presence of malware, mobile payments and cryptocurrency wallets. Examples of DRM systems employing white-box implementations include CSS and Widevine. White-box cryptography is closely related to the more general notions of obfuscation, in particular, to Black-box obfuscation, proven to be impossible, and to Indistinguishability obfuscation, constructed recently under well-founded assumptions but so far being infeasible to implement in practice. As of January 2023, there are no publicly known unbroken white-box designs of standard symmetric encryption schemes. On the other hand, there exist many unbroken white-box implementations of dedicated block ciphers designed specifically to achieve incompressibility (see § Security goals). == Security goals == Depending on the application, different security goals may be required from a white-box implementation. Specifically, for symmetric-key algorithms the following are distinguished: Unbreakability is the most fundamental goal requiring that a bounded attacker should not be able to recover the secret key embedded in the white-box implementation. Without this requirement, all other security goals are unreachable since a successful attacker can simply use a reference implementation of the encryption scheme together with the extracted key. One-wayness requires that a white-box implementation of an encryption scheme can not be used by a bounded attacker to decrypt ciphertexts. This requirement essentially turns a symmetric encryption scheme into a public-key encryption scheme, where the white-box implementation plays the role of the public key associated to the embedded secret key. This idea was proposed already in the famous work of Diffie and Hellman in 1976 as a potential public-key encryption candidate. Code lifting security is an informal requirement on the context, in which the white-box program is being executed. It demands that an attacker can not extract a functional copy of the program. This goal is particularly relevant in the DRM setting. Code obfuscation techniques are often used to achieve this goal. A commonly used technique is to compose the white-box implementation with so-called external encodings. These are lightweight secret encodings that modify the function computed by the white-box part of an application. It is required that their effect is canceled in other parts of the application in an obscure way, using code obfuscation techniques. Alternatively, the canceling counterparts can be applied on a remote server. Incompressibility requires that an attacker can not significantly compress a given white-box implementation. This can be seen as a way to achieve code lifting security (see above), since exfiltrating a large program from a constrained device (for example, an embedded or a mobile device) can be time-consuming and may be easy to detect by a firewall. Examples of incompressible designs include SPACE cipher, SPNbox, WhiteKey and WhiteBlock. These ciphers use large lookup tables that can be pseudorandomly generated from a secret master key. Although this makes the recovery of the master key hard, the lookup tables themselves play the role of an equivalent secret key. Thus, unbreakability is achieved only partially. Traceability (Traitor tracing) requires that each distributed white-box implementation contains a digital watermark allowing identification of the guilty user in case the white-box program is being leaked and distributed publicly. == History == The white-box model with initial attempts of white-box DES and AES implementations were first proposed by Chow, Eisen, Johnson and van Oorshot in 2003. The designs were based on representing the cipher as a network of lookup tables and obfuscating the tables by composing them with small (4- or 8-bit) random encodings. Such protection satisfied a property that each single obfuscated table individually does not contain any information about the secret key. Therefore, a potential attacker has to combine several tables in their analysis. The first two schemes were broken in 2004 by Billet, Gilbert, and Ech-Chatbi using structural cryptanalysis. The attack was subsequently called "the BGE attack". The numerous consequent design attempts (2005-2022) were quickly broken by practical dedicated attacks. In 2016, Bos, Hubain, Michiels and Teuwen showed that an adaptation of standard side-channel power analysis attacks can be used to efficiently and fully automatically break most existing white-box designs. This result created a new research direction about generic attacks (correlation-based, algebraic, fault injection) and protections against them. == Competitions == Four editions of the WhibOx contest were held in 2017, 2019, 2021 and 2024 respectively. These competitions invited white-box designers both from academia and industry to submit their implementation in the form of (possibly obfuscated) C code. At the same time, everyone could attempt to attack these programs and recover the embedded secret key. Each of these competitions lasted for about 4-5 months. WhibOx 2017 / CHES 2017 Capture the Flag Challenge targeted the standard AES block cipher. Among 94 submitted implementations, all were broken during the competition, with the strongest one staying unbroken for 28 days. WhibOx 2019 / CHES 2019 Capture the Flag Challenge again targeted the AES block cipher. Among 27 submitted implementations, 3 programs stayed unbroken throughout the competition, but were broken after 51 days since the publication. WhibOx 2021 / CHES 2021 Capture the Flag Challenge changed the target to ECDSA, a digital signature scheme based on elliptic curves. Among 97 submitted implementations, all were broken within at most 2 days. WhibOx 2024 / CHES 2024 Capture the Flag Challenge again targeted ECDSA. Among 47 submitted implementations, all were broken during the competition, with the strongest one staying unbroken for almost 5 days.

  Read more →
• 

  List of network buses

  List of electrical characteristics of single collision domain segment "slow speed" network buses: The number of nodes can be limited by either number of available addresses or bus capacitance. None of the above use any analog domain modulation techniques like MLT-3 encoding, PAM-5 etc. PSI5 designed with automation applications in mind is a bit unusual in that it uses Manchester code.

  Read more →
• 

  Caspio

  Caspio, Inc. is an American software company providing a low-code platform for building cloud-based business applications. Founded in 2000 by Frank Zamani, the company is headquartered in Sunnyvale, California, with operations in Poland, the Philippines, and Spain. Caspio’s platform allows organizations to create online database applications and workflow tools without extensive coding. == History == Caspio was founded by Frank Zamani in 2000. The company initially focused on simplifying custom cloud applications and reducing development time and cost as compared to traditional software development. Caspio released the first version of its platform, Caspio Bridge, in 2001. In 2014, Caspio released a HIPAA-Compliant Edition of its low-code application development platform. Caspio also released an EU General Data Protection Regulation (GDPR) Compliance Edition of its low-code application development platform in 2016. Caspio's second European Software Development Center opened in Kraków, Poland in 2017. In 2019, Forrester Research listed Caspio and three other platforms in its highest of four ranked tiers of twelve low-code platforms for business developers based on rankings of offerings and strategy at that time. Caspio also opened data centers in Montreal, Canada and India in 2020.

  Read more →
• 

  Data exchange

  Data exchange is the process of moving data from one information system to another. It often involves transforming data that is native to the source system into a form that is consumable by the target system or to a standardized form that is consumable by any compatible system. In particular, data exchange allows data to be shared between computer programs. Data exchange is similar to data integration except that data may be restructured with possible loss of content. There may be no way to transform a particular collection based on exchange constraints. Conversely, there may be multiple ways to transform the data, in which case one option must be identified in order to achieve compatibility between source and target. There are two main types of data exchange: broadcast and peer-to-peer (a.k.a. unicast). For broadcast, data is transmitted simultaneously to all consumers. Just as a conference call, all participants get the same information from the speaker at the same time. For peer-to-peer, data is sent to a single receiver, defined by a specific address. For example, a letter goes to just one mail box. == Single-domain == In some domains, a multiple source and target schema (proprietary data formats) may exist. An exchange or interchange format is often developed for a single domain, and then necessary routines (mappings) are written to (indirectly) transform/translate each and every source schema to each and every target schema by using the interchange format as an intermediate step. That requires less work than writing and debugging the many routines that would be required to directly translate each source schema directly to each target schema. Examples of these transformative interchange formats include: Standard Interchange Format for geospatial data; Data Interchange Format for spreadsheet data; Open Document Format for spreadsheets, charts, presentations and word processing documents; GPS eXchange Format or Keyhole Markup Language for describing GPS data; GDSII for integrated circuit layout. == Representation == A data exchange (a.k.a. interchange) language defines a domain-independent way to represent data. These languages have evolved from being markup and display-oriented to support the encoding of metadata that describes the structural attributes of the information. Practice has shown that certain types of formal languages are better suited for this task than others, since their specification is driven by a formal process instead of particular software implementation. For example, XML is a markup language that was designed to enable the creation of dialects (the definition of domain-specific sublanguages). However, it does not contain domain-specific dictionaries or fact types. Beneficial to a reliable data exchange is the availability of standard dictionaries-taxonomies and tools libraries such as parsers, schema validators, and transformation tools. === XML === The popularity of XML for data exchange on the World Wide Web has several reasons. First of all, it is closely related to the preexisting standards Standard Generalized Markup Language (SGML) and Hypertext Markup Language (HTML), and as such a parser written to support these two languages can be easily extended to support XML as well. For example, XHTML has been defined as a format that is formal XML, but understood correctly by most (if not all) HTML parsers. === YAML === YAML was designed to be human-readable and authored via a text editor with notion similar to reStructuredText and wiki syntax. YAML 1.2 also includes a shorthand notion that is compatible with JSON, and as such any JSON document is also valid YAML; this however does not hold the other way. === REBOL === REBOL was designed to be human-readable and authored via a text editor. It uses a simple free-form syntax with minimal punctuation and a rich set of data types (such as URL, email, date and time, tuple, string, tag) that respect common standards. It is designed to not need any additional meta-language, being designed in a metacircular fashion which is why the parse dialect used for definitions and transformations of REBOL dialects is also itself a dialect of REBOL. REBOL was used as a source of inspiration for JSON. === Gellish === Gellish English is a formalized subset of natural English (language), which includes a simple grammar and a large, extensible dictionary (taxonomy) that defines the general and domain specific terminology, whereas the concepts are arranged in a hierarchy, which supports inheritance of knowledge and requirements. The dictionary also includes standardized fact types. The terms and relation types together can be used to create and interpret expressions of facts, knowledge, requirements and other information. Gellish can be used in combination with SQL, RDF/XML, OWL and various other meta-languages. The Gellish standard is a combination of ISO 10303-221 (AP221) and ISO 15926. === List === The following describes and compares popular data exchange languages. Columns Schemas – Whether supports representing domain specific data structure definition Flexible – Whether supports extension of the semantic expression capabilities without modifying the schema Semantic verification – Whether supports semantic verification of the correctness of expressions in the language Dictionary – Whether includes a dictionary and a taxonomy (hierarchy) of concepts with inheritance Information model – Whether supports an information model Synonyms and homonyms – Whether supports the use of synonyms and homonyms in expressions Dialecting – Whether is available in multiple natural languages or dialects Web standard – Whether is standardized by a recognized body Transformations – Whether includes a translation to other standards Lightweight – Whether a lightweight version is available Human readable – Whether expressions are understandable without training Compatibility – Which other tools can be used or are required

  Read more →
• 

  Cambridge Analytica

  Cambridge Analytica Ltd. (CA), previously known as SCL USA, was a British political consulting firm that came to prominence through the Facebook–Cambridge Analytica data scandal. It was founded in 2013, as a subsidiary of the private intelligence company and self-described "global election management agency" SCL Group by long-time SCL executives Nigel Oakes, Alexander Nix and Alexander Oakes, with Nix as CEO. Cambridge Analytica was hired by a variety of political actors, including the Trinidadian government in 2010 and the 2016 presidential campaigns of Ted Cruz and Donald Trump. The firm maintained offices in London, New York City, and Washington, D.C. The company closed operations in 2018 due to backlash from the scandal, although firms related to both Cambridge Analytica and its parent firm SCL still exist. == History == Cambridge Analytica was founded in 2013 as a subsidiary of the private intelligence company SCL Group, which describes itself as providing "data, analytics and strategy to governments and military organisations worldwide". The company was part of "an international web of companies" headed by the London-based SCL Group. Cambridge Analytica (SCL USA) was incorporated in January 2013 with its registered office being in Westferry Circus, London and consisting of just one staff member, director and CEO Alexander Nix (also appointed in January 2015). Nix was also the director of nine similar companies sharing the same registered offices in London, including Firecrest technologies, Emerdata and six SCL Group companies including "SCL elections limited". Nigel Oakes, known as the former boyfriend of Lady Helen Windsor, had founded the predecessor SCL Group in the 1990s, and in 2005 Oakes established SCL Group together with his brother Alexander Oakes and Alexander Nix; SCL Group was the parent company of Cambridge Analytica. Former Conservative minister and MP Sir Geoffrey Pattie was the founding chairman of SCL; Lord Ivar Mountbatten also joined Oakes as a director of the company. As a result of the Facebook–Cambridge Analytica data scandal, Nix was removed as CEO and replaced by Julian Wheatland before the company closed. Several of the company's executives were Old Etonians. The company's owners included several of the Conservative Party's largest donors such as billionaire Vincent Tchenguiz, former British Conservative minister Jonathan Marland, Baron Marland and the family of American hedge fund manager Robert Mercer. The company combined misappropriation of digital assets, data mining, data brokerage, and data analysis with strategic communication during electoral processes. While its parent SCL had focused on influencing elections in developing countries since the 1990s, Cambridge Analytica focused more on the western world, including the United Kingdom and the United States; CEO Alexander Nix has said CA was involved in 44 U.S. political races in 2014. In 2015, CA performed data analysis services for Ted Cruz's presidential campaign. In 2016, CA worked for Donald Trump's presidential campaign as well as for Leave.EU (one of the organisations campaigning in the United Kingdom's referendum on European Union membership). CA's role in those campaigns has been controversial and is the subject of ongoing inquiries in both countries. Political scientists question CA's claims about the effectiveness of its methods of targeting voters. == Data scandal == In March 2018, media outlets broke news of Cambridge Analytica's business practices. The New York Times and The Observer reported that the company had acquired and used personal data about Facebook users from an external researcher who had told Facebook he was collecting it for academic purposes. Shortly afterwards, Channel 4 News aired undercover investigative videos showing Nix boasting about using prostitutes, bribery sting operations, and honey traps to discredit politicians on whom it had conducted opposition research, and saying that the company "ran all of (Donald Trump's) digital campaign". In response to the media reports, the Information Commissioner's Office (ICO) of the UK pursued a warrant to search the company's servers. Facebook banned Cambridge Analytica from advertising on its platform, saying that it had been deceived. On 23 March 2018, the British High Court granted the ICO a warrant to search Cambridge Analytica's London offices. As a result, Nix was suspended as CEO, and replaced by Julian Wheatland. The personal data of up to 87 million Facebook users were acquired via the 270,000 Facebook users who used a Facebook app created by Aleksandr Kogan called "This Is Your Digital Life". This was a personality profiling app and asked simple personality questions similar to other Facebook quizzes. Kogan was a scientist and psychologist, also being an employed lecturer for the University of Cambridge from 2012 to 2018. Alexander Nix claimed they had close to five thousand data points on each person who participated. They also gathered information through other data brokers ending with them acquiring millions of data points from American citizens. Kogan's app exploited a feature of Facebook's Graph API (version 1.0), which permitted any third-party app to access not only the app user's data, but also the full profile data of all of that user's Facebook friends, without those friends' knowledge or consent. This platform-wide design was available to all developers and was used by tens of thousands of apps; Facebook CEO Mark Zuckerberg later told the House Energy and Commerce Committee that the company was auditing "tens of thousands" of apps that had had access to large amounts of user data. Because the average Facebook user at the time had approximately 300 friends, the 270,000 users who installed Kogan's app yielded data on up to 87 million people. Facebook deprecated the friends-data API in April 2014 and shut it down entirely in April 2015, but data already collected by apps remained in developers' possession. Kogan passed this data to Cambridge Analytica, breaching Facebook's terms of service. On 1 May 2018, Cambridge Analytica and its parent company SCL filed for insolvency proceedings and closed operations. Alexander Tayler, a former director for Cambridge Analytica, was appointed director of Emerdata on 28 March 2018. Rebekah Mercer, Jennifer Mercer, Alexander Nix and Johnson Chun Shun Ko, who has links to American businessman Erik Prince, are in leadership positions at Emerdata. The Russo brothers are producing an upcoming film on Cambridge Analytica. In 2019 the Federal Trade Commission filed an administrative complaint against Cambridge Analytica for misuse of data. In 2020, the British Information Commissioner's Office closed a three-year inquiry into the company, concluded that Cambridge Analytica was "not involved" in the 2016 Brexit referendum and found no additional evidence for Russia's alleged interference during the campaign. US sensitive polling and election data, however, were passed to Russian Intelligence via a Cambridge Analytica contractor Sam Patten, Trump campaign manager Paul Manafort, and Russian agent Konstantin Kilimnik, who was indicted during the affair. Publicly, parent company SCL Group called itself a "global election management agency", Politico reported it was known for involvement "in military disinformation campaigns to social media branding and voter targeting". SCL gained work on a large number of campaigns for the US and UK governments' war on terror advancing their model of behavioral conflict during the 2000s. SCL's involvement in the political world has been primarily in the developing world where it has been used by the military and politicians to study and manipulate public opinion and political will. Slate writer Sharon Weinberger compared one of SCL's hypothetical test scenarios to fomenting a coup. Among the investors in Cambridge Analytica were some of the Conservative Party's largest donors such as billionaire Vincent Tchenguiz, former Conservative minister Jonathan Marland, Baron Marland, Roger Gabb, the family of American hedge fund manager Robert Mercer, and Steve Bannon. A minimum of 15 million dollars has been invested into the company by Mercer, according to The New York Times. Bannon's stake in the company was estimated at 1 to 5 million dollars, but he divested his holdings in April 2017 as required by his role as White House Chief Strategist. In March 2018, Jennifer Mercer and Rebekah Mercer became directors of Emerdata limited. In March 2018 it became public by Christopher Wylie, that Cambridge Analytica's first activities were founded on a data set, which its parent company SCL bought 2014 from a company named Global Science Research founded by Aleksandr Kogan and his team present across the world who worked as a psychologist at Cambridge. During Boris Johnson's tenure as foreign secretary, the Foreign Office sought advice from Cambridge Analytica and Boris Johnson had a meeting with Alexander N

  Read more →
• 

  Airborne Networking

  An Airborne Network (AN) is the infrastructure owned by the United States Air Force that provides communication transport services through at least one node that is on a platform capable of flight. == Background == === Definition === The intent of the US Air Force's Airborne Network is to expand the Global Information Grid (GIG) to connect the three major domains of warfare: Air, Space, and Terrestrial. The Transformational Satellite Communications System network currently provides connectivity for all communication through space assets. The Combat Information Transport System and Theater Deployable Communications provide terrestrial connectivity for theatre based operations. The Airborne Network is engineered to utilize all airborne assets to connect with space and surface networks building a seamless communications platform across all domains. === Capabilities === The capabilities identified by this type of system are vastly beyond that of our current military. This system will enable the Air Force to provide a transportable network, flexible enough to communicate with any air, space, or ground asset in the area. The network will provide a beyond line-of-sight (LoS) communications infrastructure that can be packed up and moved in and out of the designated battlespace, enabling the military to have a reliable and secure communications network that extends globally. The network is designed to be flexible enough to provide the right communication and network packages for a specific region, mission, or technology. Operationally, The AN is designed to be self-forming, self-organizing, and self-generating, with nodes joining and leaving the network as they enter and exit a specific region. The network consists of dedicated tactical links, wideband air-to-air links, and ad hoc networks constructed by the Joint Tactical Radio System (JTRS) networking services. JTRS is a software-defined radio that will work with many existing military and civilian radios. It includes integrated encryption and Wideband Networking Software to create mobile ad hoc networks. It also provides system performance analysis and fault diagnostics automatically, reducing the demand for human intervention and network maintenance. === Intended Use === The AN was designed as the cornerstone for the new military doctrine known as Network Centric Warfare. This doctrine was developed to use information superiority to equip warfighters with more precise information enabling commanders and shooters to make smarter decisions faster. The AN contributes to Network Centric Warfare by enabling commanders to provide real-time information to warfighters in the air and on the ground. Warfighters can then utilize more information and make more educated decisions about how to act in a particular situation. Once the act has been carried out commanders will have immediate information about the result and can make judgments on how to continue. All-in-all the AN was designed to reduce the time necessary to identify a target, make clear and educated decisions to pull or not to pull the trigger, and assess battle == Topologies == There are four main network topologies that will be deployed and vary based on the placement of backbone and subnet class networks. === Space, Air, Ground Tether === Establishing a direct connection to another aircraft or ground node, via a point-to-point link for nodes within LOS or via a Satellite Communications (SATCOM) link for nodes that are beyond line-of-sight is known as tethering. SATCOM links provide connectivity to a network ground entry point. Strike aircraft that accompany C2 aircraft such as an AWACS are tethered via point-to-point links. Finally, C2 or intelligence, surveillance, and reconnaissnce (ISR) aircraft may connect via a LOS link directly to a network ground entry point. Each of these tethered alternatives works exactly like a hub or switch that has an entry point to a larger network and allows their connected users access to that network. === Flat Ad Hoc === A flat ad hoc topology refers to establishing nonpersistent network connections as needed among AN nodes that are present at a given time. With this network the nodes dynamically “discover” other nodes to which they can interconnect and form the network. The specific interconnections between the nodes are not planned in advance, but are made as opportunities arise. The nodes join and leave the network at will, continually changing connections to neighbor nodes based upon their location and mobility characteristics. === Tiered Ad Hoc === Ad hoc networks can be flat in the sense that all nodes are peers of each other in a single network, as discussed above, or they can dynamically organize themselves into hierarchical tiers such that higher tiers are used to move data between more localized subnets. This network topology can be compared to any conventional deployed network that utilizes routers, switches, and hubs to temporarily connect users. === Persistent Backbone === A network topology characterized by a persistent backbone is established using relatively persistent wideband connections among high-value platforms flying relatively stable orbits. It provides the connectivity between the tactical subnets which are considered edge networks relative to the backbone. This provides concentration points for connectivity to the space backbone as well as to terrestrial networks. This type of network topology is comparable to a conventional permanent network with established data trunks, routers, switches, and hubs to connect users. == Architecture == === Network Management === The platform management system enables operators to manage all on-board network elements. It interfaces and interoperates with the Airborne Network management system to enable operators to manage remote network elements in the airborne network. The network management system monitors the health of the network by passively testing the network for faults and latency. The system will also actively troubleshoot faults with probes to identify and isolate faulty connections, and enables operators to apply network parameters and security changes to all systems based on the status of the network. === Routing/Switching === Routing and switching enables data to be dynamically transmitted over the network to other nodes. Routing protocols must be able to identify nodes transmitted within their own platform and data to be sent to other platforms regardless of the current topology. The routing protocol must also provide seamless roaming by ensuring that no routed packets are lost when a node changes its point of attachment to the network. Maintaining scalability is important in routing as the network is constantly changing. The network must be able to function with numerous levels of platforms, varying numbers of fast moving platforms, and varying amounts of traffic per platform. Routers and switches will use metrics to determine the best paths to take when routing data. The routing protocol utilized for the AN will be an Adaptive Quality of Service routing protocol. === Gateways/Proxies === Gateways and proxies enable the connection numerous technology types regardless of age to communicate across the IP-based network. Gateways and proxies are essential in the operation of this network because so many different technologies are used to communicate in each domain. These systems will facilitate the transition of the legacy on-board infrastructure, transmission systems, tactical data link systems, and user applications to the objective airborne network systems. Therefore, they are only temporary until all platforms use a standardized IP radio for transmission. === Performance Enhancing Proxies === Performance Enhancing Proxies improve the performance of user applications running across the Airborne Network by countering wireless network impairments, such as limited bandwidth, long delays, high loss rates, and disruptions in network connections. Proxy systems are implemented between the user application and the network and can be used to improve performance at the application and transport functional layers of the OSI model. Some techniques that can be employed include: Compression: Data compression or header compression can be used to minimize the number of bits sent over the network. Data bundling: Smaller data packets can be combined (bundled) into a single large packet for transmission over the network. Caching: A local cache can be used to save and provide data objects that are requested multiple times, reducing transmissions over the network (and improving response times). Store and forward: Message queuing can be used to ensure message delivery to users who become disconnected from the network or are unable to connect to the network for a period of time. Once the platform connects, the stored messages are sent. Pipelining: Rather than opening several separate network connections pipelining can be used to share a single networ

  Read more →
• 

  Operation Serenata de Amor

  Operation Serenata de Amor is an artificial intelligence project designed to analyze public spending in Brazil. The project has been funded by a recurrent financing campaign since September 7, 2016, and came in the wake of major scandals of misappropriation of public funds in Brazil, such as the Mensalão scandal and what was revealed in the Operation Car Wash investigations. The analysis began with data from the National Congress then expanded to other types of budget and instances of government, such as the Federal Senate. The project is built through collaboration on GitHub and using a public group with more than 600 participants on Telegram. The name "Serenata de Amor," which means "serenade of love," was taken from a popular cashew cream bonbon produced by Chocolates Garoto in Brazil. == Modules == Throughout development of the project, new modules have been newly introduced in addition to the main repository: The main repository, serenata-de-amor, serves as the starting point for investigative work. Rosie is the robot programmed to identify public funds expenses with discrepancies, starting with CEAP (Quota for Exercise of Parliamentary Activity); it analyzes each of the reimbursements requested by the deputies and senators, indicating the reasons that lead it to believe they are suspicious. From Rosie was born whistleblower, which tweets under the name of @RosieDaSerenata, distributing the results found on social media. Jarbas (Github repository) is a data visualization tool which shows a complete list of reimbursements made available by the Chamber of Deputies and mined by Rosie. Toolbox is a Python installable package that supports the development of Serenata de Amor and Rosie. == History == Operation Serenata de Amor is an Artificial intelligence project for analysis of public expenditures. It was conceived in March 2016 by data scientist Irio Musskopf, sociologist Eduardo Cuducos and entrepreneur Felipe Cabral. The project was financed collectively in the Catarse platform, where it reached 131% of the collection goal paying 3 months of project development. Ana Schwendler, also a data scientist, Pedro Vilanova "Tonny", data journalist, Bruno Pazzim, software engineer, Filipe Linhares, a frontend engineer, Leandro Devegili, an entrepreneur and André Pinho took the first steps towards constructing the platform, such as collecting and structuring the first datasets. Jessica Temporal, data scientist and Yasodara Córdova "Yaso", researcher, Tatiana Balachova "Russa", UX designer, joined the project after the financing took place. The members created a recurring financing campaign, expanding the analysis of public spending to the Federal Senate. Donors make monthly payments ranging from 5 BRL to 200 BRL to maintain group activities. The monthly amount collected is around 10,000 BRL. == Results == In January 2017, concluding the period financed by the initial campaign, the group carried out an investigation into the suspicious activities found by the data analysis system. 629 complaints were made to the Ombudsman's Office of the Chamber of Deputies, questioning expenses of 216 federal deputies. In addition, the Facebook project page has more than 25,000 followers, and users frequently cite the operation as a benchmark in transparency in the Brazilian government. One of the examples of results obtained by the operation is the case of the Deputy who had to return about 700 BRL to the House after his expenses were analyzed by the platform. The platform was able to analyze more than 3 million notes, raising about 8,000 suspected cases in public spending. The community that supports the work of the team benefits from open source repositories, with licenses open for the collaboration. So much so that the two main data scientists of the project presented it at the CivicTechFest in Taipei, obtaining several mentions even in the international press. The technical leader presented the project in Poland during DevConf2017 in Kraków. It was also presented in the Google News Lab in 2017. It was presented by Yaso, when she was the Director of the initiative, at the MIT Media Lab/Berkman Klein Center Initiative for Artificial Intelligence ethics, and at the Artificial Intelligence and Inclusion Symposium, an initiative of the Global Network of Internet & Society Centers (NoC). It was also presented both by Irio and Yaso at the Digital Harvard Kennedy School, over a lunch seminar, where the transparency of the platform and the main solutions found were discussed, so that the code and data are always available to verify its suitability. This infographic provides information about the first results of Operation Serenata de Amor, a project that analyzes open data on public spending to find discrepancies. The project was presented by Yaso to the House Audit and Control Committee of the Chamber of Deputies in August 2017, and raised the interest of House officials who work with open data. The operation has been a source of inspiration for other civic projects that aim to work with similar goals, demonstrating the broader impact of artificial intelligence also in industry in Brazil. Participation of several team members in events throughout Brazil and abroad can be found on the Internet, such as presentation at OpenDataDay, held at Calango Hackerspace in the Federal District, Campus Party Bahia, Campus Party Brasilia, Friends of Tomorrow, XIII National Meeting of Internal Control, in the event USP Talks Hackfest against corruption in João Pessoa, the latter being also highlighted in the National Press.

  Read more →
• 

  Dynamic knowledge repository

  The dynamic knowledge repository (DKR) is a concept developed by Douglas C. Engelbart as a primary strategic focus for allowing humans to address complex problems. He has proposed that a DKR will enable us to develop a collective IQ greater than any individual's IQ. References and discussion of Engelbart's DKR concept are available at the Doug Engelbart Institute. == Definition == A knowledge repository is a computerized system that systematically captures, organizes and categorizes an organization's knowledge. The repository can be searched and data can be quickly retrieved. The effective knowledge repositories include factual, conceptual, procedural and meta-cognitive techniques. The key features of knowledge repositories include communication forums. A knowledge repository can take many forms to "contain" the knowledge it holds. A customer database is a knowledge repository of customer information and insights – or electronic explicit knowledge. A Library is a knowledge repository of books – physical explicit knowledge. A community of experts is a knowledge repository of tacit knowledge or experience. The nature of the repository only changes to contain/manage the type of knowledge it holds. A repository (as opposed to an archive) is designed to get knowledge out. It should therefore have some rules of structure, classification, taxonomy, record management, etc., to facilitate user engagement.

  Read more →
• 

  Scalable Coherent Interface

  The Scalable Coherent Interface or Scalable Coherent Interconnect (SCI), is a high-speed interconnect standard for shared memory multiprocessing and message passing. The goal was to scale well, provide system-wide memory coherence and a simple interface; i.e. a standard to replace existing buses in multiprocessor systems with one with no inherent scalability and performance limitations. The IEEE Std 1596-1992, IEEE Standard for Scalable Coherent Interface (SCI) was approved by the IEEE standards board on March 19, 1992. It saw some use during the 1990s, but never became widely used and has been replaced by other systems from the early 2000s. == History == Soon after the Fastbus (IEEE 960) follow-on Futurebus (IEEE 896) project in 1987, some engineers predicted it would already be too slow for the high performance computing marketplace by the time it would be released in the early 1990s. In response, a "Superbus" study group was formed in November 1987. Another working group of the standards association of the Institute of Electrical and Electronics Engineers (IEEE) spun off to form a standard targeted at this market in July 1988. It was essentially a subset of Futurebus features that could be easily implemented at high speed, along with minor additions to make it easier to connect to other systems, such as VMEbus. Most of the developers had their background from high-speed computer buses. Representatives from companies in the computer industry and research community included Amdahl, Apple Computer, BB&N, Hewlett-Packard, CERN, Dolphin Server Technology, Cray Research, Sequent, AT&T, Digital Equipment Corporation, McDonnell Douglas, National Semiconductor, Stanford Linear Accelerator Center, Tektronix, Texas Instruments, Unisys, University of Oslo, University of Wisconsin. The original intent was a single standard for all buses in the computer. The working group soon came up with the idea of using point-to-point communication in the form of insertion rings. This avoided the lumped capacitance, limited physical length/speed of light problems and stub reflections in addition to allowing parallel transactions. The use of insertion rings is credited to Manolis Katevenis who suggested it at one of the early meetings of the working group. The working group for developing the standard was led by David B. Gustavson (chair) and David V. James (Vice Chair). David V. James was a major contributor for writing the specifications including the executable C-code. Stein Gjessing’s group at the University of Oslo used formal methods to verify the coherence protocol and Dolphin Server Technology implemented a node controller chip including the cache coherence logic. Different versions and derivatives of SCI were implemented by companies like Dolphin Interconnect Solutions, Convex, Data General AViiON (using cache controller and link controller chips from Dolphin), Sequent and Cray Research. Dolphin Interconnect Solutions implemented a PCI and PCI-Express connected derivative of SCI that provides non-coherent shared memory access. This implementation was used by Sun Microsystems for its high-end clusters, Thales Group and several others including volume applications for message passing within HPC clustering and medical imaging. SCI was often used to implement non-uniform memory access architectures. It was also used by Sequent Computer Systems as the processor memory bus in their NUMA-Q systems. Numascale developed a derivative to connect with coherent HyperTransport. == The standard == The standard defined two interface levels: The physical level that deals with electrical signals, connectors, mechanical and thermal conditions The logical level that describes the address space, data transfer protocols, cache coherence mechanisms, synchronization primitives, control and status registers, and initialization and error recovery facilities. This structure allowed new developments in physical interface technology to be easily adapted without any redesign on the logical level. Scalability for large systems is achieved through a distributed directory-based cache coherence model. (The other popular models for cache coherency are based on system-wide eavesdropping (snooping) of memory transactions – a scheme which is not very scalable.) In SCI each node contains a directory with a pointer to the next node in a linked list that shares a particular cache line. SCI defines a 64-bit flat address space (16 exabytes) where 16 bits are used for identifying a node (65,536 nodes) and 48 bits for address within the node (256 terabytes). A node can contain many processors and/or memory. The SCI standard defines a packet switched network. === Topologies === SCI can be used to build systems with different types of switching topologies from centralized to fully distributed switching: With a central switch, each node is connected to the switch with a ringlet (in this case a two-node ring). In distributed switching systems, each node can be connected to a ring of arbitrary length and either all or some of the nodes can be connected to two or more rings. The most common way to describe these multi-dimensional topologies is k-ary n-cubes (or tori). The SCI standard specification mentions several such topologies as examples. The 2-D torus is a combination of rings in two dimensions. Switching between the two dimensions requires a small switching capability in the node. This can be expanded to three or more dimensions. The concept of folding rings can also be applied to the Torus topologies to avoid any long connection segments. === Transactions === SCI sends information in packets. Each packet consists of an unbroken sequence of 16-bit symbols. The symbol is accompanied by a flag bit. A transition of the flag bit from 0 to 1 indicates the start of a packet. A transition from 1 to 0 occurs 1 (for echoes) or 4 symbols before the packet end. A packet contains a header with address command and status information, payload (from 0 through optional lengths of data) and a CRC check symbol. The first symbol in the packet header contains the destination node address. If the address is not within the domain handled by the receiving node, the packet is passed to the output through the bypass FIFO. In the other case, the packet is fed to a receive queue and may be transferred to a ring in another dimension. All packets are marked when they pass the scrubber (a node is established as scrubber when the ring is initialized). Packets without a valid destination address will be removed when passing the scrubber for the second time to avoid filling the ring with packets that would otherwise circulate indefinitely. === Cache coherence === Cache coherence ensures data consistency in multiprocessor systems. The simplest form applied in earlier systems was based on clearing the cache contents between context switches and disabling the cache for data that were shared between two or more processors. These methods were feasible when the performance difference between the cache and memory were less than one order of magnitude. Modern processors with caches that are more than two orders of magnitude faster than main memory would not perform anywhere near optimal without more sophisticated methods for data consistency. Bus based systems use eavesdropping (snooping) methods since buses are inherently broadcast. Modern systems with point-to point links use broadcast methods with snoop filter options to improve performance. Since broadcast and eavesdropping are inherently non-scalable, these are not used in SCI. Instead, SCI uses a distributed directory-based cache coherence protocol with a linked list of nodes containing processors that share a particular cache line. Each node holds a directory for the main memory of the node with a tag for each line of memory (same line length as the cache line). The memory tag holds a pointer to the head of the linked list and a state code for the line (three states – home, fresh, gone). Associated with each node is also a cache for holding remote data with a directory containing forward and backward pointers to nodes in the linked list sharing the cache line. The tag for the cache has seven states (invalid, only fresh, head fresh, only dirty, head dirty, mid valid, tail valid). The distributed directory is scalable. The overhead for the directory based cache coherence is a constant percentage of the node’s memory and cache. This percentage is in the order of 4% for the memory and 7% for the cache. == Legacy == SCI is a standard for connecting the different resources within a multiprocessor computer system, and it is not as widely known to the public as for example the Ethernet family for connecting different systems. Different system vendors implemented different variants of SCI for their internal system infrastructure. These different implementations interface to very intricate mechanisms in processors and memory systems and each vendor has to preserve some degrees of

  Read more →