AI Generator Outfit

AI Generator Outfit — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

  • Nona-binning

    Nona-binning

    Nona-binning is a pixel binning technique used in high-resolution image sensors, primarily in smartphone cameras. The method is based on merging groups of nine neighbouring pixels arranged in a 3×3 pattern. This configuration allows a sensor with very small individual pixels to increase its effective light sensitivity when operating in low-light conditions, while still maintaining high nominal resolution in bright environments. == Overview == Nona-binning is most commonly implemented in sensors with a resolution of 108 megapixels and higher. As pixel counts grew, the physical dimensions of individual pixels continued to shrink, reducing the amount of light captured by each. The 3×3 binning structure enables a sensor to operate in two modes. In well-lit scenes, each pixel is processed separately, providing the full resolution of the sensor. In darker settings, nine pixels with identical colour filters are combined into a single output unit, increasing signal strength and reducing noise. == Technical principles == Unlike the traditional Bayer colour filter array, which alternates colours on a per-pixel basis, nona-binning uses a grouped layout. The sensor forms blocks of nine pixels with matching colour filters — typically within a Quad Bayer–derived arrangement extended to 3×3 regions. When operating in the binning mode, the sensor aggregates the charge generated by all nine pixels in each block. This increases effective sensitivity but lowers the final image resolution. When lighting conditions allow, the sensor returns to processing pixel data individually. == Applications == Nona-binning is primarily used in: Smartphone photography, particularly in devices equipped with sensors exceeding 100 megapixels. Low-light imaging, where increased sensitivity improves exposure stability and reduces noise. Computational photography systems, such as multi-frame processing and HDR capture. == Related technologies == Nona-binning belongs to the broader group of pixel-binning approaches used in modern sensors. Other implementations include Tetracell, which merges four pixels in a 2×2 block, and hexa-binning, which combines six pixels, though it is less common. All of these methods aim to balance the high nominal resolution of mobile sensors with the need for improved low-light performance.

    Read more →
  • Unique negative dimension

    Unique negative dimension

    Unique negative dimension (UND) is a complexity measure for the model of learning from positive examples. The unique negative dimension of a class C {\displaystyle C} of concepts is the size of the maximum subclass D ⊆ C {\displaystyle D\subseteq C} such that for every concept c ∈ D {\displaystyle c\in D} , we have ∩ ( D ∖ { c } ) ∖ c {\displaystyle \cap (D\setminus \{c\})\setminus c} is nonempty. This concept was originally proposed by M. Gereb-Graus in "Complexity of learning from one-side examples", Technical Report TR-20-89, Harvard University Division of Engineering and Applied Science, 1989.

    Read more →
  • Multilinear subspace learning

    Multilinear subspace learning

    Multilinear subspace learning is an approach for disentangling the causal factor of data formation and performing dimensionality reduction. The Dimensionality reduction can be performed on a data tensor that contains a collection of observations that have been vectorized, or observations that are treated as matrices and concatenated into a data tensor. Here are some examples of data tensors whose observations are vectorized or whose observations are matrices concatenated into data tensor images (2D/3D), video sequences (3D/4D), and hyperspectral cubes (3D/4D). The mapping from a high-dimensional vector space to a set of lower dimensional vector spaces is a multilinear projection. When observations are retained in the same organizational structure as matrices or higher order tensors, their representations are computed by performing linear projections into the column space, row space and fiber space. Multilinear subspace learning algorithms are higher-order generalizations of linear subspace learning methods such as principal component analysis (PCA), independent component analysis (ICA), linear discriminant analysis (LDA) and canonical correlation analysis (CCA). == Background == Multilinear methods may be causal in nature and perform causal inference, or they may be simple regression methods from which no causal conclusion are drawn. Linear subspace learning algorithms are traditional dimensionality reduction techniques that are well suited for datasets that are the result of varying a single causal factor. Unfortunately, they often become inadequate when dealing with datasets that are the result of multiple causal factors. . Multilinear subspace learning can be applied to observations whose measurements were vectorized and organized into a data tensor for causally aware dimensionality reduction. These methods may also be employed in reducing horizontal and vertical redundancies irrespective of the causal factors when the observations are treated as a "matrix" (ie. a collection of independent column/row observations) and concatenated into a tensor. == Algorithms == === Multilinear principal component analysis === Historically, multilinear principal component analysis has been referred to as "M-mode PCA", a terminology which was coined by Peter Kroonenberg. In 2005, Vasilescu and Terzopoulos introduced the Multilinear PCA terminology as a way to better differentiate between multilinear tensor decompositions that computed 2nd order statistics associated with each data tensor mode, and subsequent work on Multilinear Independent Component Analysis that computed higher order statistics for each tensor mode. MPCA is an extension of PCA. === Multilinear independent component analysis === Multilinear independent component analysis is an extension of ICA. === Multilinear linear discriminant analysis === Multilinear extension of LDA TTP-based: Discriminant Analysis with Tensor Representation (DATER) TTP-based: General tensor discriminant analysis (GTDA) TVP-based: Uncorrelated Multilinear Discriminant Analysis (UMLDA) === Multilinear canonical correlation analysis === Multilinear extension of CCA TTP-based: Tensor Canonical Correlation Analysis (TCCA) TVP-based: Multilinear Canonical Correlation Analysis (MCCA) TVP-based: Bayesian Multilinear Canonical Correlation Analysis (BMTF) A TTP is a direct projection of a high-dimensional tensor to a low-dimensional tensor of the same order, using N projection matrices for an Nth-order tensor. It can be performed in N steps with each step performing a tensor-matrix multiplication (product). The N steps are exchangeable. This projection is an extension of the higher-order singular value decomposition (HOSVD) to subspace learning. Hence, its origin is traced back to the Tucker decomposition in 1960s. A TVP is a direct projection of a high-dimensional tensor to a low-dimensional vector, which is also referred to as the rank-one projections. As TVP projects a tensor to a vector, it can be viewed as multiple projections from a tensor to a scalar. Thus, the TVP of a tensor to a P-dimensional vector consists of P projections from the tensor to a scalar. The projection from a tensor to a scalar is an elementary multilinear projection (EMP). In EMP, a tensor is projected to a point through N unit projection vectors. It is the projection of a tensor on a single line (resulting a scalar), with one projection vector in each mode. Thus, the TVP of a tensor object to a vector in a P-dimensional vector space consists of P EMPs. This projection is an extension of the canonical decomposition, also known as the parallel factors (PARAFAC) decomposition. === Typical approach in MSL === There are N sets of parameters to be solved, one in each mode. The solution to one set often depends on the other sets (except when N=1, the linear case). Therefore, the suboptimal iterative procedure in is followed. Initialization of the projections in each mode For each mode, fixing the projection in all the other mode, and solve for the projection in the current mode. Do the mode-wise optimization for a few iterations or until convergence. This is originated from the alternating least square method for multi-way data analysis. == Code == MATLAB Tensor Toolbox by Sandia National Laboratories. The MPCA algorithm written in Matlab (MPCA+LDA included). The UMPCA algorithm written in Matlab (data included). The UMLDA algorithm written in Matlab (data included). == Tensor data sets == 3D gait data (third-order tensors): 128x88x20(21.2M); 64x44x20(9.9M); 32x22x10(3.2M);

    Read more →
  • Elastic map

    Elastic map

    Elastic maps provide a tool for nonlinear dimensionality reduction. By their construction, they are a system of elastic springs embedded in the data space. This system approximates a low-dimensional manifold. The elastic coefficients of this system allow the switch from completely unstructured k-means clustering (zero elasticity) to the estimators located closely to linear PCA manifolds (for high bending and low stretching modules). With some intermediate values of the elasticity coefficients, this system effectively approximates non-linear principal manifolds. This approach is based on a mechanical analogy between principal manifolds, that are passing through "the middle" of the data distribution, and elastic membranes and plates. The method was developed by A.N. Gorban, A.Y. Zinovyev and A.A. Pitenko in 1996–1998. == Energy of elastic map == Let S {\displaystyle {\mathcal {S}}} be a data set in a finite-dimensional Euclidean space. Elastic map is represented by a set of nodes w j {\displaystyle {\bf {w}}_{j}} in the same space. Each datapoint s ∈ S {\displaystyle s\in {\mathcal {S}}} has a host node, namely the closest node w j {\displaystyle {\bf {w}}_{j}} (if there are several closest nodes then one takes the node with the smallest number). The data set S {\displaystyle {\mathcal {S}}} is divided into classes K j = { s | w j is a host of s } {\displaystyle K_{j}=\{s\ |\ {\bf {w}}_{j}{\mbox{ is a host of }}s\}} . The approximation energy D is the distortion D = 1 2 ∑ j = 1 k ∑ s ∈ K j ‖ s − w j ‖ 2 {\displaystyle D={\frac {1}{2}}\sum _{j=1}^{k}\sum _{s\in K_{j}}\|s-{\bf {w}}_{j}\|^{2}} , which is the energy of the springs with unit elasticity which connect each data point with its host node. It is possible to apply weighting factors to the terms of this sum, for example to reflect the standard deviation of the probability density function of any subset of data points { s i } {\displaystyle \{s_{i}\}} . On the set of nodes an additional structure is defined. Some pairs of nodes, ( w i , w j ) {\displaystyle ({\bf {w}}_{i},{\bf {w}}_{j})} , are connected by elastic edges. Call this set of pairs E {\displaystyle E} . Some triplets of nodes, ( w i , w j , w k ) {\displaystyle ({\bf {w}}_{i},{\bf {w}}_{j},{\bf {w}}_{k})} , form bending ribs. Call this set of triplets G {\displaystyle G} . The stretching energy is U E = 1 2 λ ∑ ( w i , w j ) ∈ E ‖ w i − w j ‖ 2 {\displaystyle U_{E}={\frac {1}{2}}\lambda \sum _{({\bf {w}}_{i},{\bf {w}}_{j})\in E}\|{\bf {w}}_{i}-{\bf {w}}_{j}\|^{2}} , The bending energy is U G = 1 2 μ ∑ ( w i , w j , w k ) ∈ G ‖ w i − 2 w j + w k ‖ 2 {\displaystyle U_{G}={\frac {1}{2}}\mu \sum _{({\bf {w}}_{i},{\bf {w}}_{j},{\bf {w}}_{k})\in G}\|{\bf {w}}_{i}-2{\bf {w}}_{j}+{\bf {w}}_{k}\|^{2}} , where λ {\displaystyle \lambda } and μ {\displaystyle \mu } are the stretching and bending moduli respectively. The stretching energy is sometimes referred to as the membrane, while the bending energy is referred to as the thin plate term. For example, on the 2D rectangular grid the elastic edges are just vertical and horizontal edges (pairs of closest vertices) and the bending ribs are the vertical or horizontal triplets of consecutive (closest) vertices. The total energy of the elastic map is thus U = D + U E + U G . {\displaystyle U=D+U_{E}+U_{G}.} The position of the nodes { w j } {\displaystyle \{{\bf {w}}_{j}\}} is determined by the mechanical equilibrium of the elastic map, i.e. its location is such that it minimizes the total energy U {\displaystyle U} . == Expectation-maximization algorithm == For a given splitting of dataset S {\displaystyle {\mathcal {S}}} in classes K j {\displaystyle K_{j}} , minimization of the quadratic functional U {\displaystyle U} is a linear problem with the sparse matrix of coefficients. Therefore, similar to principal component analysis or k-means, a splitting method is used: For given { w j } {\displaystyle \{{\bf {w}}_{j}\}} find { K j } {\displaystyle \{K_{j}\}} ; For given { K j } {\displaystyle \{K_{j}\}} minimize U {\displaystyle U} and find { w j } {\displaystyle \{{\bf {w}}_{j}\}} ; If no change, terminate. This expectation-maximization algorithm guarantees a local minimum of U {\displaystyle U} . For improving the approximation various additional methods are proposed. For example, the softening strategy is used. This strategy starts with a rigid grids (small length, small bending and large elasticity modules λ {\displaystyle \lambda } and μ {\displaystyle \mu } coefficients) and finishes with soft grids (small λ {\displaystyle \lambda } and μ {\displaystyle \mu } ). The training goes in several epochs, each epoch with its own grid rigidness. Another adaptive strategy is growing net: one starts from a small number of nodes and gradually adds new nodes. Each epoch goes with its own number of nodes. == Applications == Most important applications of the method and free software are in bioinformatics for exploratory data analysis and visualisation of multidimensional data, for data visualisation in economics, social and political sciences, as an auxiliary tool for data mapping in geographic informational systems and for visualisation of data of various nature. The method is applied in quantitative biology for reconstructing the curved surface of a tree leaf from a stack of light microscopy images. This reconstruction is used for quantifying the geodesic distances between trichomes and their patterning, which is a marker of the capability of a plant to resist to pathogenes. Recently, the method is adapted as a support tool in the decision process underlying the selection, optimization, and management of financial portfolios. The method of elastic maps has been systematically tested and compared with several machine learning methods on the applied problem of identification of the flow regime of a gas-liquid flow in a pipe. There are various regimes: Single phase water or air flow, Bubbly flow, Bubbly-slug flow, Slug flow, Slug-churn flow, Churn flow, Churn-annular flow, and Annular flow. The simplest and most common method used to identify the flow regime is visual observation. This approach is, however, subjective and unsuitable for relatively high gas and liquid flow rates. Therefore, the machine learning methods are proposed by many authors. The methods are applied to differential pressure data collected during a calibration process. The method of elastic maps provided a 2D map, where the area of each regime is represented. The comparison with some other machine learning methods is presented in Table 1 for various pipe diameters and pressure. Here, ANN stands for the backpropagation artificial neural networks, SVM stands for the support vector machine, SOM for the self-organizing maps. The hybrid technology was developed for engineering applications. In this technology, elastic maps are used in combination with Principal Component Analysis (PCA), Independent Component Analysis (ICA) and backpropagation ANN. The textbook provides a systematic comparison of elastic maps and self-organizing maps (SOMs) in applications to economic and financial decision-making.

    Read more →
  • Princh

    Princh

    Princh is a Danish software company, which is headquartered in Aarhus, Denmark. Founded in 2015, Princh develops cloud printing and electronic payment products. The company is headquartered in the city of Aarhus. While utilizing a smartphone or web app, users can locate a nearby printer to their current location, get directions to access said printer, and/or authorize a print and pay for the print job in question. The product is available as a native mobile apps for Android and iOS, as well as on web and desktop products for businesses and libraries. The app connects a network of printer owners and users around the world. Princh supports an array of printable files. == History == The company was founded in 2015. The company is currently based in the southern part of Aarhus. The Princh printing service was officially launched on June 23, 2015. Currently, Princh is available as a service in a multitude of locations such as print shops, libraries, hotels, or universities. Princh is a popular printing and payment product among libraries and can among other places be found in Denmark, Sweden, Norway, Germany, United Kingdom, United States, and Canada. == How it works == With the Princh app, users will be able to locate their nearest printer. Once the user is at the printer, the user chooses the document to be printed out and shares it with the Princh app. The user then selects the desired nearby printer entering the printer ID number or scanning the QR-code located on top of the printer, pays electronically and the print job is processed by the printer. Printer owners get access to a personal control panel where they can set printing prices and monitor all Princh activity for their business. == Notes and references ==

    Read more →
  • Distribution learning theory

    Distribution learning theory

    The distributional learning theory or learning of probability distribution is a framework in computational learning theory. It has been proposed from Michael Kearns, Yishay Mansour, Dana Ron, Ronitt Rubinfeld, Robert Schapire and Linda Sellie in 1994 and it was inspired from the PAC-framework introduced by Leslie Valiant. In this framework the input is a number of samples drawn from a distribution that belongs to a specific class of distributions. The goal is to find an efficient algorithm that, based on these samples, determines with high probability the distribution from which the samples have been drawn. Because of its generality, this framework has been used in a large variety of different fields like machine learning, approximation algorithms, applied probability and statistics. This article explains the basic definitions, tools and results in this framework from the theory of computation point of view. == Definitions == Let X {\displaystyle \textstyle X} be the support of the distributions of interest. As in the original work of Kearns et al. if X {\displaystyle \textstyle X} is finite it can be assumed without loss of generality that X = { 0 , 1 } n {\displaystyle \textstyle X=\{0,1\}^{n}} where n {\displaystyle \textstyle n} is the number of bits that have to be used in order to represent any y ∈ X {\displaystyle \textstyle y\in X} . We focus in probability distributions over X {\displaystyle \textstyle X} . There are two possible representations of a probability distribution D {\displaystyle \textstyle D} over X {\displaystyle \textstyle X} . probability distribution function (or evaluator) an evaluator E D {\displaystyle \textstyle E_{D}} for D {\displaystyle \textstyle D} takes as input any y ∈ X {\displaystyle \textstyle y\in X} and outputs a real number E D [ y ] {\displaystyle \textstyle E_{D}[y]} which denotes the probability that of y {\displaystyle \textstyle y} according to D {\displaystyle \textstyle D} , i.e. E D [ y ] = Pr [ Y = y ] {\displaystyle \textstyle E_{D}[y]=\Pr[Y=y]} if Y ∼ D {\displaystyle \textstyle Y\sim D} . generator a generator G D {\displaystyle \textstyle G_{D}} for D {\displaystyle \textstyle D} takes as input a string of truly random bits y {\displaystyle \textstyle y} and outputs G D [ y ] ∈ X {\displaystyle \textstyle G_{D}[y]\in X} according to the distribution D {\displaystyle \textstyle D} . Generator can be interpreted as a routine that simulates sampling from the distribution D {\displaystyle \textstyle D} given a sequence of fair coin tosses. A distribution D {\displaystyle \textstyle D} is called to have a polynomial generator (respectively evaluator) if its generator (respectively evaluator) exists and can be computed in polynomial time. Let C X {\displaystyle \textstyle C_{X}} a class of distribution over X, that is C X {\displaystyle \textstyle C_{X}} is a set such that every D ∈ C X {\displaystyle \textstyle D\in C_{X}} is a probability distribution with support X {\displaystyle \textstyle X} . The C X {\displaystyle \textstyle C_{X}} can also be written as C {\displaystyle \textstyle C} for simplicity. In order to evaluate learnability, it is necessary to have a way to measure how well an approximated distribution D ′ {\displaystyle \textstyle D'} fits the sampled distribution D {\displaystyle \textstyle D} . There are several ways to measure the divergence between two distributions. Three common possibilities are Kullback–Leibler divergence Total variation distance of probability measures Kolmogorov distance Total variation and Kolmogorov distance are true metrics, while KL divergence is not (it lacks symmetry). These measures are ordered by convergence strength: closeness in KL divergence implies closeness in total variation (via Pinsker's inequality), which in turn implies closeness in Kolmogorov distance. Therefore, a learnability result proven under KL divergence automatically holds under the weaker measures, but not vice versa. Since certain measures may be more appropriate in specific applications, we will use d ( D , D ′ ) {\displaystyle \textstyle d(D,D')} to denote a selected divergence between the distribution D {\displaystyle \textstyle D} and the distribution D ′ {\displaystyle \textstyle D'} . The basic input that we use in order to learn a distribution is a number of samples drawn by this distribution. For the computational point of view the assumption is that such a sample is given in a constant amount of time. So it's like having access to an oracle G E N ( D ) {\displaystyle \textstyle GEN(D)} that returns a sample from the distribution D {\displaystyle \textstyle D} . Sometimes the interest is, apart from measuring the time complexity, to measure the number of samples that have to be used in order to learn a specific distribution D {\displaystyle \textstyle D} in class of distributions C {\displaystyle \textstyle C} . This quantity is called sample complexity of the learning algorithm. In order for the problem of distribution learning to be more clear consider the problem of supervised learning as defined in. In this framework of statistical learning theory a training set S = { ( x 1 , y 1 ) , … , ( x n , y n ) } {\displaystyle \textstyle S=\{(x_{1},y_{1}),\dots ,(x_{n},y_{n})\}} and the goal is to find a target function f : X → Y {\displaystyle \textstyle f:X\rightarrow Y} that minimizes some loss function, e.g. the square loss function. More formally f = arg ⁡ min g ∫ V ( y , g ( x ) ) d ρ ( x , y ) {\displaystyle f=\arg \min _{g}\int V(y,g(x))d\rho (x,y)} , where V ( ⋅ , ⋅ ) {\displaystyle V(\cdot ,\cdot )} is the loss function, e.g. V ( y , z ) = ( y − z ) 2 {\displaystyle V(y,z)=(y-z)^{2}} and ρ ( x , y ) {\displaystyle \rho (x,y)} the probability distribution according to which the elements of the training set are sampled. If the conditional probability distribution ρ x ( y ) {\displaystyle \rho _{x}(y)} is known then the target function has the closed form f ( x ) = ∫ y y d ρ x ( y ) {\displaystyle f(x)=\int _{y}yd\rho _{x}(y)} . So the set S {\displaystyle S} is a set of samples from the probability distribution ρ ( x , y ) {\displaystyle \rho (x,y)} . Now the goal of distributional learning theory if to find ρ {\displaystyle \rho } given S {\displaystyle S} which can be used to find the target function f {\displaystyle f} . Definition of learnability A class of distributions C {\displaystyle \textstyle C} is called efficiently learnable if for every ϵ > 0 {\displaystyle \textstyle \epsilon >0} and 0 < δ ≤ 1 {\displaystyle \textstyle 0<\delta \leq 1} given access to G E N ( D ) {\displaystyle \textstyle GEN(D)} for an unknown distribution D ∈ C {\displaystyle \textstyle D\in C} , there exists a polynomial time algorithm A {\displaystyle \textstyle A} , called learning algorithm of C {\displaystyle \textstyle C} , that outputs a generator or an evaluator of a distribution D ′ {\displaystyle \textstyle D'} such that Pr [ d ( D , D ′ ) ≤ ϵ ] ≥ 1 − δ {\displaystyle \Pr[d(D,D')\leq \epsilon ]\geq 1-\delta } If we know that D ′ ∈ C {\displaystyle \textstyle D'\in C} then A {\displaystyle \textstyle A} is called proper learning algorithm, otherwise is called improper learning algorithm. In some settings the class of distributions C {\displaystyle \textstyle C} is a class with well known distributions which can be described by a set of parameters. For instance C {\displaystyle \textstyle C} could be the class of all the Gaussian distributions N ( μ , σ 2 ) {\displaystyle \textstyle N(\mu ,\sigma ^{2})} . In this case the algorithm A {\displaystyle \textstyle A} should be able to estimate the parameters μ , σ {\displaystyle \textstyle \mu ,\sigma } . In this case A {\displaystyle \textstyle A} is called parameter learning algorithm. Obviously the parameter learning for simple distributions is a very well studied field that is called statistical estimation and there is a very long bibliography on different estimators for different kinds of simple known distributions. But distributions learning theory deals with learning class of distributions that have more complicated description. == First results == In their seminal work, Kearns et al. deal with the case where A {\displaystyle \textstyle A} is described in term of a finite polynomial sized circuit and they proved the following for some specific classes of distribution. O R {\displaystyle \textstyle OR} gate distributions for this kind of distributions there is no polynomial-sized evaluator, unless # P ⊆ P / poly {\displaystyle \textstyle \#P\subseteq P/{\text{poly}}} . On the other hand, this class is efficiently learnable with generator. Parity gate distributions this class is efficiently learnable with both generator and evaluator. Mixtures of Hamming Balls this class is efficiently learnable with both generator and evaluator. Probabilistic Finite Automata this class is not efficiently learnable with evaluator under the Noisy Parity Assumption which is an impossibility assumption in the PAC learning fram

    Read more →
  • Artificial development

    Artificial development

    Artificial development, also known as artificial embryogeny or machine intelligence or computational development, is an area of computer science and engineering concerned with computational models motivated by genotype–phenotype mappings in biological systems. Artificial development is often considered a sub-field of evolutionary computation, although the principles of artificial development have also been used within stand-alone computational models. Within evolutionary computation, the need for artificial development techniques was motivated by the perceived lack of scalability and evolvability of direct solution encodings (Tufte, 2008). Artificial development entails indirect solution encoding. Rather than describing a solution directly, an indirect encoding describes (either explicitly or implicitly) the process by which a solution is constructed. Often, but not always, these indirect encodings are based upon biological principles of development such as morphogen gradients, cell division and cellular differentiation (e.g. Doursat 2008), gene regulatory networks (e.g. Guo et al., 2009), degeneracy (Whitacre et al., 2010), grammatical evolution (de Salabert et al., 2006), or analogous computational processes such as re-writing, iteration, and time. The influences of interaction with the environment, spatiality and physical constraints on differentiated multi-cellular development have been investigated more recently (e.g. Knabe et al. 2008). Artificial development approaches have been applied to a number of computational and design problems, including electronic circuit design (Miller and Banzhaf 2003), robotic controllers (e.g. Taylor 2004), and the design of physical structures (e.g. Hornby 2004).

    Read more →
  • LPBoost

    LPBoost

    Linear Programming Boosting (LPBoost) is a supervised classifier from the boosting family of classifiers. LPBoost maximizes a margin between training samples of different classes, and thus also belongs to the class of margin classifier algorithms. Consider a classification function f : X → { − 1 , 1 } , {\displaystyle f:{\mathcal {X}}\to \{-1,1\},} which classifies samples from a space X {\displaystyle {\mathcal {X}}} into one of two classes, labelled 1 and -1, respectively. LPBoost is an algorithm for learning such a classification function, given a set of training examples with known class labels. LPBoost is a machine learning technique especially suited for joint classification and feature selection in structured domains. == LPBoost overview == As in all boosting classifiers, the final classification function is of the form f ( x ) = ∑ j = 1 J α j h j ( x ) , {\displaystyle f({\boldsymbol {x}})=\sum _{j=1}^{J}\alpha _{j}h_{j}({\boldsymbol {x}}),} where α j {\displaystyle \alpha _{j}} are non-negative weightings for weak classifiers h j : X → { − 1 , 1 } {\displaystyle h_{j}:{\mathcal {X}}\to \{-1,1\}} . Each individual weak classifier h j {\displaystyle h_{j}} may be just a little bit better than random, but the resulting linear combination of many weak classifiers can perform very well. LPBoost constructs f {\displaystyle f} by starting with an empty set of weak classifiers. Iteratively, a single weak classifier to add to the set of considered weak classifiers is selected, added and all the weights α {\displaystyle {\boldsymbol {\alpha }}} for the current set of weak classifiers are adjusted. This is repeated until no weak classifiers to add remain. The property that all classifier weights are adjusted in each iteration is known as totally-corrective property. Early boosting methods, such as AdaBoost do not have this property and converge slower. == Linear program == More generally, let H = { h ( ⋅ ; ω ) | ω ∈ Ω } {\displaystyle {\mathcal {H}}=\{h(\cdot ;\omega )|\omega \in \Omega \}} be the possibly infinite set of weak classifiers, also termed hypotheses. One way to write down the problem LPBoost solves is as a linear program with infinitely many variables. The primal linear program of LPBoost, optimizing over the non-negative weight vector α {\displaystyle {\boldsymbol {\alpha }}} , the non-negative vector ξ {\displaystyle {\boldsymbol {\xi }}} of slack variables and the margin ρ {\displaystyle \rho } is the following. min α , ξ , ρ − ρ + D ∑ n = 1 ℓ ξ n sb.t. ∑ ω ∈ Ω y n α ω h ( x n ; ω ) + ξ n ≥ ρ , n = 1 , … , ℓ , ∑ ω ∈ Ω α ω = 1 , ξ n ≥ 0 , n = 1 , … , ℓ , α ω ≥ 0 , ω ∈ Ω , ρ ∈ R . {\displaystyle {\begin{array}{cl}{\underset {{\boldsymbol {\alpha }},{\boldsymbol {\xi }},\rho }{\min }}&-\rho +D\sum _{n=1}^{\ell }\xi _{n}\\{\textrm {sb.t.}}&\sum _{\omega \in \Omega }y_{n}\alpha _{\omega }h({\boldsymbol {x}}_{n};\omega )+\xi _{n}\geq \rho ,\qquad n=1,\dots ,\ell ,\\&\sum _{\omega \in \Omega }\alpha _{\omega }=1,\\&\xi _{n}\geq 0,\qquad n=1,\dots ,\ell ,\\&\alpha _{\omega }\geq 0,\qquad \omega \in \Omega ,\\&\rho \in {\mathbb {R} }.\end{array}}} Note the effects of slack variables ξ ≥ 0 {\displaystyle {\boldsymbol {\xi }}\geq 0} : their one-norm is penalized in the objective function by a constant factor D {\displaystyle D} , which—if small enough—always leads to a primal feasible linear program. Here we adopted the notation of a parameter space Ω {\displaystyle \Omega } , such that for a choice ω ∈ Ω {\displaystyle \omega \in \Omega } the weak classifier h ( ⋅ ; ω ) : X → { − 1 , 1 } {\displaystyle h(\cdot ;\omega ):{\mathcal {X}}\to \{-1,1\}} is uniquely defined. When the above linear program was first written down in early publications about boosting methods it was disregarded as intractable due to the large number of variables α {\displaystyle {\boldsymbol {\alpha }}} . Only later it was discovered that such linear programs can indeed be solved efficiently using the classic technique of column generation. === Column generation for LPBoost === In a linear program a column corresponds to a primal variable. Column generation is a technique to solve large linear programs. It typically works in a restricted problem, dealing only with a subset of variables. By generating primal variables iteratively and on-demand, eventually the original unrestricted problem with all variables is recovered. By cleverly choosing the columns to generate the problem can be solved such that while still guaranteeing the obtained solution to be optimal for the original full problem, only a small fraction of columns has to be created. ==== LPBoost dual problem ==== Columns in the primal linear program corresponds to rows in the dual linear program. The equivalent dual linear program of LPBoost is the following linear program. max λ , γ γ sb.t. ∑ n = 1 ℓ y n h ( x n ; ω ) λ n + γ ≤ 0 , ω ∈ Ω , 0 ≤ λ n ≤ D , n = 1 , … , ℓ , ∑ n = 1 ℓ λ n = 1 , γ ∈ R . {\displaystyle {\begin{array}{cl}{\underset {{\boldsymbol {\lambda }},\gamma }{\max }}&\gamma \\{\textrm {sb.t.}}&\sum _{n=1}^{\ell }y_{n}h({\boldsymbol {x}}_{n};\omega )\lambda _{n}+\gamma \leq 0,\qquad \omega \in \Omega ,\\&0\leq \lambda _{n}\leq D,\qquad n=1,\dots ,\ell ,\\&\sum _{n=1}^{\ell }\lambda _{n}=1,\\&\gamma \in \mathbb {R} .\end{array}}} For linear programs the optimal value of the primal and dual problem are equal. For the above primal and dual problems, the optimal value is equal to the negative 'soft margin'. The soft margin is the size of the margin separating positive from negative training instances minus positive slack variables that carry penalties for margin-violating samples. Thus, the soft margin may be positive although not all samples are linearly separated by the classification function. The latter is called the 'hard margin' or 'realized margin'. ==== Convergence criterion ==== Consider a subset of the satisfied constraints in the dual problem. For any finite subset we can solve the linear program and thus satisfy all constraints. If we could prove that of all the constraints which we did not add to the dual problem no single constraint is violated, we would have proven that solving our restricted problem is equivalent to solving the original problem. More formally, let γ ∗ {\displaystyle \gamma ^{}} be the optimal objective function value for any restricted instance. Then, we can formulate a search problem for the 'most violated constraint' in the original problem space, namely finding ω ∗ ∈ Ω {\displaystyle \omega ^{}\in \Omega } as ω ∗ = argmax ω ∈ Ω ∑ n = 1 ℓ y n h ( x n ; ω ) λ n . {\displaystyle \omega ^{}={\underset {\omega \in \Omega }{\textrm {argmax}}}\sum _{n=1}^{\ell }y_{n}h({\boldsymbol {x}}_{n};\omega )\lambda _{n}.} That is, we search the space H {\displaystyle {\mathcal {H}}} for a single decision stump h ( ⋅ ; ω ∗ ) {\displaystyle h(\cdot ;\omega ^{})} maximizing the left hand side of the dual constraint. If the constraint cannot be violated by any choice of decision stump, none of the corresponding constraint can be active in the original problem and the restricted problem is equivalent. ==== Penalization constant ==== D {\displaystyle D} The positive value of penalization constant D {\displaystyle D} has to be found using model selection techniques. However, if we choose D = 1 ℓ ν {\displaystyle D={\frac {1}{\ell \nu }}} , where ℓ {\displaystyle \ell } is the number of training samples and 0 < ν < 1 {\displaystyle 0<\nu <1} , then the new parameter ν {\displaystyle \nu } has the following properties. ν {\displaystyle \nu } is an upper bound on the fraction of training errors; that is, if k {\displaystyle k} denotes the number of misclassified training samples, then k ℓ ≤ ν {\displaystyle {\frac {k}{\ell }}\leq \nu } . ν {\displaystyle \nu } is a lower bound on the fraction of training samples outside or on the margin. == Algorithm == Input: Training set X = { x 1 , … , x ℓ } {\displaystyle X=\{{\boldsymbol {x}}_{1},\dots ,{\boldsymbol {x}}_{\ell }\}} , x i ∈ X {\displaystyle {\boldsymbol {x}}_{i}\in {\mathcal {X}}} Training labels Y = { y 1 , … , y ℓ } {\displaystyle Y=\{y_{1},\dots ,y_{\ell }\}} , y i ∈ { − 1 , 1 } {\displaystyle y_{i}\in \{-1,1\}} Convergence threshold θ ≥ 0 {\displaystyle \theta \geq 0} Output: Classification function f : X → { − 1 , 1 } {\displaystyle f:{\mathcal {X}}\to \{-1,1\}} Initialization Weights, uniform λ n ← 1 ℓ , n = 1 , … , ℓ {\displaystyle \lambda _{n}\leftarrow {\frac {1}{\ell }},\quad n=1,\dots ,\ell } Edge γ ← 0 {\displaystyle \gamma \leftarrow 0} Hypothesis count J ← 1 {\displaystyle J\leftarrow 1} Iterate h ^ ← argmax ω ∈ Ω ∑ n = 1 ℓ y n h ( x n ; ω ) λ n {\displaystyle {\hat {h}}\leftarrow {\underset {\omega \in \Omega }{\textrm {argmax}}}\sum _{n=1}^{\ell }y_{n}h({\boldsymbol {x}}_{n};\omega )\lambda _{n}} if ∑ n = 1 ℓ y n h ^ ( x n ) λ n + γ ≤ θ {\displaystyle \sum _{n=1}^{\ell }y_{n}{\hat {h}}({\boldsymbol {x}}_{n})\lambda _{n}+\gamma \leq \theta } then break h J ← h ^ {\displaystyle h_{J}\leftarrow {\hat {h}}} J

    Read more →
  • Vigloo

    Vigloo

    Vigloo (Korean: 비글루) is a South Korean microdrama, also known as short-form drama, series streaming platform owned by SpoonLabs, with headquarters in Seoul. It provides content produced in South Korea, Japan, and the United States. Vigloo produced the first AI-created short-form drama in South Korea. == History == Vigloo launched in July 2024. After receiving an equity investment of $86 million (₩120 billion) by South Korean video game company Krafton in September 2024, Vigloo expanded to the U.S. In January 2025, Vigloo unveiled its first in-house produced drama, Xs Who Want to Kill: Adultery Investigation Unit. Vigloo had been testing the use of AI in post-production and visual effects, and in October 2025 released two original dramas produced entirely with AI. It adapted its live action Japanese short-form drama Boyfriend Search Project – Kissing 5 Men into the first short-form animation series made with AI technology in South Korea. Of the top free entertainment iOS apps in South Korea, Vigloo ranks Number 3 as of January 2026. == Service == === Content === Vigloo offers both original and licensed content. It partnered with Passionflix to repackage the latter's original series The Secret Life of Amy Bensen into 35 vertical "bite-sized episodes". The most popular genre is romance, such as romantasy. === Business Model === Vigloo is available around the world, providing subtitles in nine languages, including Korean, English, and Japanese. Fifty percent of Vigloo's revenue comes from the U.S. Vigloo operates on a freemium model, where viewers can try several episodes and then can choose to continue by subscription or in-app purchases. As of September 2025, 70% of Vigloo viewers were over 35 years old. === Microdramas === Emerging during the early COVID period in China, microdramas have grown into a 7-billion-dollar market with dozens of dedicated platforms now operating. Although the format first expanded across Asia, short-form scripted content optimized for mobile viewing is increasingly being produced and watched in markets worldwide. == Series == A Vampire in the Alpha's Den Fight for Love Matrimoney Signed, Sealed, Deceived by My Billionaire Mailboy Spring Break Bucket List Stake to the Heart

    Read more →
  • Bayesian hierarchical modeling

    Bayesian hierarchical modeling

    Bayesian hierarchical modelling is a statistical model written in multiple levels (hierarchical form) that estimates the posterior distribution of model parameters using the Bayesian method. The sub-models combine to form the hierarchical model, and Bayes' theorem is used to integrate them with the observed data and account for all the uncertainty that is present. This integration enables calculation of updated posterior over the (hyper)parameters, effectively updating prior beliefs in light of the observed data. Frequentist statistics may yield conclusions seemingly incompatible with those offered by Bayesian statistics due to the Bayesian treatment of the parameters as random variables and its use of subjective information in establishing assumptions on these parameters. As the approaches answer different questions the formal results are not technically contradictory but the two approaches disagree over which answer is relevant to particular applications. Bayesians argue that relevant information regarding decision-making and updating beliefs cannot be ignored and that hierarchical modeling has the potential to overrule classical methods in applications where respondents give multiple observational data. Moreover, the model has proven to be robust, with the posterior distribution less sensitive to the more flexible hierarchical priors. Hierarchical modeling, as its name implies, retains nested data structure, and is used when information is available at several different levels of observational units. For example, in epidemiological modeling to describe infection trajectories for multiple countries, observational units are countries, and each country has its own time-based profile of daily infected cases. In decline curve analysis to describe oil or gas production decline curve for multiple wells, observational units are oil or gas wells in a reservoir region, and each well has each own time-based profile of oil or gas production rates (usually, barrels per month). Hierarchical modeling is used to devise computation based strategies for multiparameter problems. == Philosophy == Statistical methods and models commonly involve multiple parameters that can be regarded as related or connected in such a way that the problem implies a dependence of the joint probability model for these parameters. Individual degrees of belief, expressed in the form of probabilities, come with uncertainty. Amidst this is the change of the degrees of belief over time. As was stated by Professor José M. Bernardo and Professor Adrian F. Smith, "The actuality of the learning process consists in the evolution of individual and subjective beliefs about the reality." These subjective probabilities are more directly involved in the mind rather than the physical probabilities. Hence, it is with this need of updating beliefs that Bayesians have formulated an alternative statistical model which takes into account the prior occurrence of a particular event. == Bayes' theorem == The assumed occurrence of a real-world event will typically modify preferences between certain options. This is done by modifying the degrees of belief attached, by an individual, to the events defining the options. Suppose in a study of the effectiveness of cardiac treatments, with the patients in hospital j having survival probability θ j {\displaystyle \theta _{j}} , the survival probability will be updated with the occurrence of y, the event in which a controversial serum is created which, as believed by some, increases survival in cardiac patients. In order to make updated probability statements about θ j {\displaystyle \theta _{j}} , given the occurrence of event y, we must begin with a model providing a joint probability distribution for θ j {\displaystyle \theta _{j}} and y. This can be written as a product of the two distributions that are often referred to as the prior distribution P ( θ ) {\displaystyle P(\theta )} and the sampling distribution P ( y ∣ θ ) {\displaystyle P(y\mid \theta )} respectively: P ( θ , y ) = P ( θ ) P ( y ∣ θ ) {\displaystyle P(\theta ,y)=P(\theta )P(y\mid \theta )} Using the basic property of conditional probability, the posterior distribution will yield: P ( θ ∣ y ) = P ( θ , y ) P ( y ) = P ( y ∣ θ ) P ( θ ) P ( y ) {\displaystyle P(\theta \mid y)={\frac {P(\theta ,y)}{P(y)}}={\frac {P(y\mid \theta )P(\theta )}{P(y)}}} This equation, showing the relationship between the conditional probability and the individual events, is known as Bayes' theorem. This simple expression encapsulates the technical core of Bayesian inference which aims to deconstruct the probability, P ( θ ∣ y ) {\displaystyle P(\theta \mid y)} , relative to solvable subsets of its supportive evidence. == Exchangeability == The usual starting point of a statistical analysis is the assumption that the n values y 1 , y 2 , … , y n {\displaystyle y_{1},y_{2},\ldots ,y_{n}} are exchangeable. If no information – other than data y – is available to distinguish any of the θ j {\displaystyle \theta _{j}} 's from any others, and no ordering or grouping of the parameters can be made, one must assume symmetry of prior distribution parameters. This symmetry is represented probabilistically by exchangeability. Generally, it is useful and appropriate to model data from an exchangeable distribution as independently and identically distributed, given some unknown parameter vector θ {\displaystyle \theta } , with distribution P ( θ ) {\displaystyle P(\theta )} . === Finite exchangeability === For a fixed number n, the set y 1 , y 2 , … , y n {\displaystyle y_{1},y_{2},\ldots ,y_{n}} is exchangeable if the joint probability P ( y 1 , y 2 , … , y n ) {\displaystyle P(y_{1},y_{2},\ldots ,y_{n})} is invariant under permutations of the indices. That is, for every permutation π {\displaystyle \pi } or ( π 1 , π 2 , … , π n ) {\displaystyle (\pi _{1},\pi _{2},\ldots ,\pi _{n})} of (1, 2, …, n), P ( y 1 , y 2 , … , y n ) = P ( y π 1 , y π 2 , … , y π n ) . {\displaystyle P(y_{1},y_{2},\ldots ,y_{n})=P(y_{\pi _{1}},y_{\pi _{2}},\ldots ,y_{\pi _{n}}).} The following is an exchangeable, but not independent and identical (iid), example: Consider an urn with a red ball and a blue ball inside, with probability 1 2 {\displaystyle {\frac {1}{2}}} of drawing either. Balls are drawn without replacement, i.e. after one ball is drawn from the n {\displaystyle n} balls, there will be n − 1 {\displaystyle n-1} remaining balls left for the next draw. Let Y i = { 1 , if the i th ball is red , 0 , otherwise . {\displaystyle {\text{Let }}Y_{i}={\begin{cases}1,&{\text{if the }}i{\text{th ball is red}},\\0,&{\text{otherwise}}.\end{cases}}} The probability of selecting a red ball in the first draw and a blue ball in the second draw is equal to the probability of selecting a blue ball on the first draw and a red on the second, both of which are 1/2: P ( y 1 = 1 , y 2 = 0 ) = P ( y 1 = 0 , y 2 = 1 ) = 1 2 {\displaystyle P(y_{1}=1,y_{2}=0)=P(y_{1}=0,y_{2}=1)={\frac {1}{2}}} . This makes y 1 {\displaystyle y_{1}} and y 2 {\displaystyle y_{2}} exchangeable. But the probability of selecting a red ball on the second draw given that the red ball has already been selected in the first is 0. This is not equal to the probability that the red ball is selected in the second draw, which is 1/2: P ( y 2 = 1 ∣ y 1 = 1 ) = 0 ≠ P ( y 2 = 1 ) = 1 2 {\displaystyle P(y_{2}=1\mid y_{1}=1)=0\neq P(y_{2}=1)={\frac {1}{2}}} . Thus, y 1 {\displaystyle y_{1}} and y 2 {\displaystyle y_{2}} are not independent. If x 1 , … , x n {\displaystyle x_{1},\ldots ,x_{n}} are independent and identically distributed, then they are exchangeable, but the converse is not necessarily true. === Infinite exchangeability === Infinite exchangeability is the property that every finite subset of an infinite sequence y 1 {\displaystyle y_{1}} , y 2 , … {\displaystyle y_{2},\ldots } is exchangeable. For any n, the sequence y 1 , y 2 , … , y n {\displaystyle y_{1},y_{2},\ldots ,y_{n}} is exchangeable. == Hierarchical models == === Components === Bayesian hierarchical modeling makes use of two important concepts in deriving the posterior distribution, namely: Hyperparameters: parameters of the prior distribution Hyperpriors: distributions of Hyperparameters Suppose a random variable Y follows a normal distribution with parameter θ {\displaystyle \theta } as the mean and 1 as the variance, that is Y ∣ θ ∼ N ( θ , 1 ) {\displaystyle Y\mid \theta \sim N(\theta ,1)} . The tilde relation ∼ {\displaystyle \sim } can be read as "has the distribution of" or "is distributed as". Suppose also that the parameter θ {\displaystyle \theta } has a distribution given by a normal distribution with mean μ {\displaystyle \mu } and variance 1, i.e. θ ∣ μ ∼ N ( μ , 1 ) {\displaystyle \theta \mid \mu \sim N(\mu ,1)} . Furthermore, μ {\displaystyle \mu } follows another distribution given, for example, by the standard normal distribution, N ( 0 , 1 ) {\displaystyle {\text{N}}(0,1)} . The parameter μ {\dis

    Read more →
  • Jubatus

    Jubatus

    Jubatus is an open-source online machine learning and distributed computing framework developed at Nippon Telegraph and Telephone and Preferred Infrastructure. Its features include classification, recommendation, regression, anomaly detection and graph mining. It supports many client languages, including C++, Java, Ruby and Python. It uses Iterative Parameter Mixture for distributed machine learning. == Notable Features == Jubatus supports: Multi-classification algorithms: Perceptron Passive Aggressive Confidence Weighted Adaptive Regularization of Weight Vectors Normal Herd Recommendation algorithms using: Inverted index Minhash Locality-sensitive hashing Regression algorithms: Passive Aggressive feature extraction method for natural language: n-gram Text segmentation

    Read more →
  • Tanagra (machine learning)

    Tanagra (machine learning)

    Tanagra is a free suite of machine learning software for research and academic purposes developed by Ricco Rakotomalala at the Lumière University Lyon 2, France. Tanagra supports several standard data mining tasks such as: Visualization, Descriptive statistics, Instance selection, feature selection, feature construction, regression, factor analysis, clustering, classification and association rule learning. Tanagra is an academic project. It is widely used in French-speaking universities. Tanagra is frequently used in real studies and in software comparison papers. == History == The development of Tanagra was started in June 2003. The first version was distributed in December 2003. Tanagra is the successor of Sipina, another free data mining tool which is intended only for supervised learning tasks (classification), especially the interactive and visual construction of decision trees. Sipina is still available online and is maintained. Tanagra is an "open source project" as every researcher can access the source code and add their own algorithms, as long as they agree and conform to the software distribution license. The main purpose of the Tanagra project is to give researchers and students a user-friendly data mining software, conforming to the present norms of the software development in this domain (especially in the design of its GUI and the way to use it), and allowing the analyzation of either real or synthetic data. From 2006, Ricco Rakotomalala made an important documentation effort. A large number of tutorials are published on a dedicated website. They describe the statistical and machine learning methods and their implementation with Tanagra on real case studies. The use of other free data mining tools on the same problems is also widely described. The comparison of the tools enables readers to understand the possible differences in the presentation of results. == Description == Tanagra works similarly to current data mining tools. The user can design visually a data mining process in a diagram. Each node is a statistical or machine learning technique, the connection between two nodes represents the data transfer. But unlike the majority of tools which are based on the workflow paradigm, Tanagra is very simplified. The treatments are represented in a tree diagram. The results are displayed in an HTML format. This makes it is easy to export the outputs in order to visualize the results in a browser. It is also possible to copy the result tables to a spreadsheet. Tanagra makes a good compromise between statistical approaches (e.g. parametric and nonparametric statistical tests), multivariate analysis methods (e.g. factor analysis, correspondence analysis, cluster analysis, regression) and machine learning techniques (e.g. neural network, support vector machine, decision trees, random forest).

    Read more →
  • Software design

    Software design

    Software design is the process of conceptualizing how a software system will work before it is implemented or modified. Software design also refers to the direct result of the design process – the concepts of how the software will work which may be formally documented or may be maintained less formally, including via oral tradition. The design process enables a designer to model aspects of a software system before it exists with the intent of making the effort of writing the code more efficiently. Creativity, past experience, a sense of what makes "good" software, and a commitment to quality are success factors for a competent design. A software design can be compared to an architected plan for a house. High-level plans represent the totality of the house (e.g., a three-dimensional rendering of the house). Lower-level plans provide guidance for constructing each detail (e.g., the plumbing lay). Similarly, the software design model provides a variety of views of the proposed software solution. == Part of the overall process == In terms of the waterfall development process, software design is the activity that occurs after requirements analysis and before coding. Requirements analysis determines what the system needs to do without determining how it will do it, and thus, multiple designs can be imagined that satisfy the requirements. The design can be created while coding, without a plan or requirements analysis, but for more complex projects this is less feasible. Completing a design prior to coding allows for multidisciplinary designers and subject-matter experts to collaborate with programmers to produce software that is useful and technically sound. Sometimes, a simulation or prototype is created to model the system in an effort to determine a valid and good design. == Code as design == A common point of confusion with the term design in software is that the process applies at multiple levels of abstraction such as a high-level software architecture and lower-level components, functions and algorithms. A relatively formal process may occur at high levels of abstraction but at lower levels, the design process is almost always less formal where the only artifact of design may be the code itself. To the extent that this is true, software design refers to the design of the design. Edsger W. Dijkstra referred to this layering of semantic levels as the "radical novelty" of computer programming, and Donald Knuth used his experience writing TeX to describe the futility of attempting to design a program prior to implementing it: TEX would have been a complete failure if I had merely specified it and not participated fully in its initial implementation. The process of implementation constantly led me to unanticipated questions and to new insights about how the original specifications could be improved. == Artifacts == A design process may include the production of art Software design documentation such as flow chart, use case, Pseudocode, Unified Modeling Language model and other Fundamental modeling concepts. For user centered software, design may involve user experience design yielding a storyboard to help determine those specifications. Documentation may be reviewed to allow constraints, specifications and even requirements to be adjusted prior to coding. == Iterative design == Software systems inherently deal with uncertainties, and the size of software components can significantly influence a system's outcomes, both positively and negatively. Neal Ford and Mark Richards propose an iterative approach to address the challenge of identifying and right-sizing components. This method emphasizes continuous refinement as teams develop a more nuanced understanding of system behavior and requirements. The approach typically involves a cycle with several stages: A high-level partitioning strategy is established, often categorized as technical or domain-based. Guidelines for the smallest meaningful deployable unit, referred to as "quanta," are defined. While these foundational decisions are made early, they may be revisited later in the cycle if necessary. Initial components are identified based on the established strategy. Requirements are assigned to the identified components. The roles and responsibilities of each component are analyzed to ensure clarity and minimize overlap. Architectural characteristics, such as scalability, fault tolerance, and maintainability, are evaluated. Components may be restructured based on feedback from development teams. This cycle serves as a general framework and can be adapted to different domains. == Design principles == Design principles enable a software engineer to navigate the design process. Davis suggested principles which have been refined over time as: The design process should not suffer from "tunnel vision" A good designer should consider alternative approaches, judging each based on the requirements of the problem, the resources available to do the job. The design should be traceable to the analysis model Because a single element of the design model can often be traced back to multiple requirements, it is necessary to have a means for tracking how requirements have been satisfied by the design model. The design should not reinvent the wheel Systems are constructed using a set of design patterns, many of which have likely been encountered before. These patterns should always be chosen as an alternative to reinvention. Time is short and resources are limited; design time should be invested in representing (truly new) ideas by integrating patterns that already exist (when applicable). The design should "minimize the intellectual distance" between the software and the problem as it exists in the real world That is, the structure of the software design should, whenever possible, mimic the structure of the problem domain. The design should exhibit uniformity and integration A design is uniform if it appears fully coherent. In order to achieve this outcome, rules of style and format should be defined for a design team before design work begins. A design is integrated if care is taken in defining interfaces between design components. The design should be structured to accommodate change The design concepts discussed in the next section enable a design to achieve this principle. The design should be structured to degrade gently, even when aberrant data, events, or operating conditions are encountered Well-designed software should never "bomb"; it should be designed to accommodate unusual circumstances, and if it must terminate processing, it should do so in a graceful manner. Design is not coding, coding is not design Even when detailed procedural designs are created for program components, the level of abstraction of the design model is higher than the source code. The only design decisions made at the coding level should address the small implementation details that enable the procedural design to be coded. The design should be assessed for quality as it is being created, not after the fact A variety of design concepts and design measures are available to assist the designer in assessing quality throughout the development process. The design should be reviewed to minimize conceptual (semantic) errors There is sometimes a tendency to focus on minutiae when the design is reviewed, missing the forest for the trees. A design team should ensure that major conceptual elements of the design (omissions, ambiguity, inconsistency) have been addressed before worrying about the syntax of the design model. == Design concepts == Design concepts provide a designer with a foundation from which more sophisticated methods can be applied. Design concepts include: Abstraction Reducing the information content of a concept or an observable phenomenon, typically to retain only information that is relevant for a particular purpose. It is an act of Representing essential features without including the background details or explanations. Architecture The overall structure of the software and the ways in which that structure provides conceptual integrity for a system. Good software architecture will yield a good return on investment with respect to the desired outcome of the project, e.g. in terms of performance, quality, schedule and cost. Control hierarchy A program structure that represents the organization of a program component and implies a hierarchy of control. Data structure Representing the logical relationship between elements of data. Design pattern A designer may identify a design aspect of the system that has solved in the past. The reuse of such patterns can increase software development velocity. Information hiding Modules should be specified and designed so that information contained within a module is inaccessible to other modules that have no need for such information. Modularity Dividing the solution into parts (modules). Refinement The process of elaboration. A hierarchy is developed by decomposing a macrosco

    Read more →
  • Genotypic and phenotypic repair

    Genotypic and phenotypic repair

    Genotypic and phenotypic repair are optional components of an evolutionary algorithm (EA). An EA reproduces essential elements of biological evolution as a computer algorithm in order to solve demanding optimization or planning tasks, at least approximately. A candidate solution is represented by a - usually linear - data structure that plays the role of an individual's chromosome. New solution candidates are generated by mutation and crossover operators following the example of biology. These offspring may be defective, which is corrected or compensated for by genotypic or phenotypic repair. == Description == Genotypic repair, also known as genetic repair, is the removal or correction of impermissible entries in the chromosome that violate restrictions. In phenotypic repair, the corrections are only made in the genotype-phenotype mapping and the chromosome remains unchanged. Michalewicz wrote about the importance of restrictions in real-world applications: "In general, constraints are an integral part of the formulation of any problem". Restriction violations are application-specific and therefore it depends on the current problem whether and which type of repair is useful. They can usually also be treated by a correspondingly extended evaluation and it depends on the problem which measures are possible and which is the most suitable. If a phenotypic repair is feasible, then it is usually the most efficient compared to the other measures. A survey on repair methods used as constraint handling techniques can be found in. Violations of the range limits of genes should be avoided as far as possible by the formulation of the genome. If this is not possible or if restrictions within the search space defined by the genome are involved, their violations are usually handled by the evaluation. This can be done, for example, by penalty functions that lower the fitness. Repair is often also required for combinatorial tasks. The application of a 1- or n-point crossover operator can, for example, lead to genes being missing in one of the child genomes that are present in duplicate in the other. In this case, a suitable genotypic repair measure is to move the surplus genes to the other genome in a positional manner. The use of the aforementioned operators in combinatorial tasks has also proven to be useful in combination with crossover types specially developed for permutations, at least for certain problems. Particularly in combinatorial problems, it has been observed that genotypic repair can promote premature convergence to a suboptimum, but can also significantly accelerate a successful search. Studies on various tasks have shown that this is application-dependent. An effective measure to avoid premature convergence is generally the use of structured populations instead of the usual panmictic ones. Sequence restrictions play a role in many scheduling tasks, for example when it comes to planning workflows. If, for example, it is specified that step A must be carried out before step B and the gene of step B is located before the gene of A in the chromosome, then there is an impermissible gene sequence. This is because the scheduling operation of step B requires the planned end of step A for correct scheduling, but this is not yet scheduled at the time gene B is processed. The problem can be solved in two ways: The scheduling operation of step B is postponed until the gene from step A has been processed. The genome remains unchanged and the repair only influences the genotype-phenotype mapping. Since only the phenotype is changed, this is referred to as phenotypic repair. If, on the other hand, the gene of step B is moved behind the gene of step A, this is a genotypic repair. The same applies to the alternative shift of gene A in front of gene B. In this case, genotypic repair has the disadvantage that it prevents a meaningful restructuring of the gene sequence in the chromosome if this requires several intermediate steps (mutations) that at least partially violate restrictions.

    Read more →
  • Ordination (statistics)

    Ordination (statistics)

    Ordination or gradient analysis, in multivariate analysis, is a method complementary to data clustering, and used mainly in exploratory data analysis (rather than in hypothesis testing). In contrast to cluster analysis, ordination orders quantities in a (usually lower-dimensional) latent space. In the ordination space, quantities that are near each other share attributes (i.e., are similar to some degree), and dissimilar objects are farther from each other. Such relationships between the objects, on each of several axes or latent variables, are then characterized numerically and/or graphically in a biplot. The first ordination method, principal components analysis, was suggested by Karl Pearson in 1901. == Methods == Ordination methods can broadly be categorized in eigenvector-, algorithm-, or model-based methods. Many classical ordination techniques, including principal components analysis, correspondence analysis (CA) and its derivatives (detrended correspondence analysis, canonical correspondence analysis, and redundancy analysis, belong to the first group). The second group includes some distance-based methods such as non-metric multidimensional scaling, and machine learning methods such as T-distributed stochastic neighbor embedding and nonlinear dimensionality reduction. The third group includes model-based ordination methods, which can be considered as multivariate extensions of Generalized Linear Models. Model-based ordination methods are more flexible in their application than classical ordination methods, so that it is for example possible to include random-effects. Unlike in the aforementioned two groups, there is no (implicit or explicit) distance measure in the ordination. Instead, a distribution needs to be specified for the responses as is typical for statistical models. These and other assumptions, such as the assumed mean-variance relationship, can be validated with the use of residual diagnostics, unlike in other ordination methods. == Applications == Ordination can be used on the analysis of any set of multivariate objects. It is frequently used in several environmental or ecological sciences, particularly plant community ecology. It is also used in genetics and systems biology for microarray data analysis and in psychometrics.

    Read more →