AI Generator Quizlet

AI Generator Quizlet — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

• 

  Feed forward (control)

  A feed forward (sometimes written feedforward) is an element or pathway within a control system that passes a controlling signal from a source in its external environment to a load elsewhere in its external environment. This is often a command signal from an external operator. In control engineering, a feedforward control system is a control system that uses sensors to detect disturbances affecting the system and then applies an additional input to minimize the effect of the disturbance. This requires a mathematical model of the system so that the effect of disturbances can be properly predicted. A control system which has only feed-forward behavior responds to its control signal in a pre-defined way without responding to the way the system reacts; it is in contrast with a system that also has feedback, which adjusts the input to take account of how it affects the system, and how the system itself may vary unpredictably. In a feed-forward system, the control variable adjustment is not error-based. Instead it is based on knowledge about the process in the form of a mathematical model of the process and knowledge about, or measurements of, the process disturbances. Some prerequisites are needed for control scheme to be reliable by pure feed-forward without feedback: the external command or controlling signal must be available, and the effect of the output of the system on the load should be known (that usually means that the load must be predictably unchanging with time). Sometimes pure feed-forward control without feedback is called 'ballistic', because once a control signal has been sent, it cannot be further adjusted; any corrective adjustment must be by way of a new control signal. In contrast, 'cruise control' adjusts the output in response to the load that it encounters, by a feedback mechanism. These systems could relate to control theory, physiology, or computing. == Overview == With feed-forward or feedforward control, the disturbances are measured and accounted for before they have time to affect the system. In the house example, a feed-forward system may measure the fact that the door is opened and automatically turn on the heater before the house can get too cold. The difficulty with feed-forward control is that the effects of the disturbances on the system must be accurately predicted, and there must not be any unmeasured disturbances. For instance, if a window was opened that was not being measured, the feed-forward-controlled thermostat might let the house cool down. The term has specific meaning within the field of CPU-based automatic control. The discipline of feedforward control as it relates to modern, CPU based automatic controls is widely discussed, but is seldom practiced due to the difficulty and expense of developing or providing for the mathematical model required to facilitate this type of control. Open-loop control and feedback control, often based on canned PID control algorithms, are much more widely used. There are three types of control systems: open-loop, feed-forward, and feedback. An example of a pure open-loop control system is manual non-power-assisted steering of a motor car; the steering system does not have access to an auxiliary power source and does not respond to varying resistance to turning of the direction wheels; the driver must make that response without help from the steering system. In comparison, power steering has access to a controlled auxiliary power source, which depends on the engine speed. When the steering wheel is turned, a valve is opened which allows fluid under pressure to turn the wheels. A sensor monitors that pressure so that the valve only opens enough to cause the correct pressure to reach the wheel turning mechanism. This is feed-forward control where the output of the system, the change in direction of travel of the vehicle, plays no part in the system. See Model predictive control. If the driver is included in the system, then they do provide a feedback path by observing the direction of travel and compensating for errors by turning the steering wheel. In that case you have a feedback system, and the block labeled System in Figure(c) is a feed-forward system. In other words, systems of different types can be nested, and the overall system regarded as a black-box. Feedforward control is distinctly different from open-loop control and teleoperator systems. Feedforward control requires a mathematical model of the plant (process and/or machine being controlled) and the plant's relationship to any inputs or feedback the system might receive. Neither open-loop control nor teleoperator systems require the sophistication of a mathematical model of the physical system or plant being controlled. Control based on operator input without integral processing and interpretation through a mathematical model of the system is a teleoperator system and is not considered feedforward control. == History == Historically, the use of the term feedforward is found in works by Harold S. Black in US patent 1686792 (invented 17 March 1923) and D. M. MacKay as early as 1956. While MacKay's work is in the field of biological control theory, he speaks only of feedforward systems. MacKay does not mention feedforward control or allude to the discipline of feedforward controls. MacKay and other early writers who use the term feedforward are generally writing about theories of how human or animal brains work. Black also has US patent 2102671 invented 2 August 1927 on the technique of feedback applied to electronic systems. The discipline of feedforward controls was largely developed by professors and graduate students at Georgia Tech, MIT, Stanford and Carnegie Mellon. Feedforward is not typically hyphenated in scholarly publications. Meckl and Seering of MIT and Book and Dickerson of Georgia Tech began the development of the concepts of Feedforward Control in the mid-1970s. The discipline of Feedforward Controls was well defined in many scholarly papers, articles and books by the late 1980s. == Benefits == The benefits of feedforward control are significant and can often justify the extra cost, time and effort required to implement the technology. Control accuracy can often be improved by as much as an order of magnitude if the mathematical model is of sufficient quality and implementation of the feedforward control law is well thought out. Energy consumption by the feedforward control system and its driver is typically substantially lower than with other controls. Stability is enhanced such that the controlled device can be built of lower cost, lighter weight, springier materials while still being highly accurate and able to operate at high speeds. Other benefits of feedforward control include reduced wear and tear on equipment, lower maintenance costs, higher reliability and a substantial reduction in hysteresis. Feedforward control is often combined with feedback control to optimize performance. == Model == The mathematical model of the plant (machine, process or organism) used by the feedforward control system may be created and input by a control engineer or it may be learned by the control system. Control systems capable of learning and/or adapting their mathematical model have become more practical as microprocessor speeds have increased. The discipline of modern feedforward control was itself made possible by the invention of microprocessors. Feedforward control requires integration of the mathematical model into the control algorithm such that it is used to determine the control actions based on what is known about the state of the system being controlled. In the case of control for a lightweight, flexible robotic arm, this could be as simple as compensating between when the robot arm is carrying a payload and when it is not. The target joint angles are adjusted to place the payload in the desired position based on knowing the deflections in the arm from the mathematical model's interpretation of the disturbance caused by the payload. Systems that plan actions and then pass the plan to a different system for execution do not satisfy the above definition of feedforward control. Unless the system includes a means to detect a disturbance or receive an input and process that input through the mathematical model to determine the required modification to the control action, it is not true feedforward control. === Open system === In control theory, an open system is a feed forward system that does not have any feedback loop to control its output. In contrast, a closed system uses on a feedback loop to control the operation of the system. In an open system, the output of the system is not fed back into the input to the system for control or operation. == Applications == === Physiological feed-forward system === In physiology, feed-forward control is exemplified by the normal anticipatory regulation of heartbeat in advance of actual physical exertion by the central autonomic network. Feed-forward

  Read more →
• 

  CLEVER score

  The CLEVER (Cross Lipschitz Extreme Value for nEtwork Robustness) score is a way of measuring the robustness of an artificial neural network towards adversarial attacks. It was developed by a team at the MIT-IBM Watson AI Lab in IBM Research and first presented at the 2018 International Conference on Learning Representations. It was mentioned and reviewed by Ian Goodfellow as well. It was adopted into an educational game Fool The Bank by Narendra Nath Joshi, Abhishek Bhandwaldar and Casey Dugan

  Read more →
• 

  Application permissions

  Permissions are a means of controlling and regulating access to specific system- and device-level functions by software. Typically, types of permissions cover functions that may have privacy implications, such as the ability to access a device's hardware features (including the camera and microphone), and personal data (such as storage devices, contacts lists, and the user's present geographical location). Permissions are typically declared in an application's manifest, and certain permissions must be specifically granted at runtime by the user—who may revoke the permission at any time. Permission systems are common on mobile operating systems, where permissions needed by specific apps must be disclosed via the platform's app store. == Mobile devices == On mobile operating systems for smartphones and tablets, typical types of permissions regulate: Access to storage and personal information, such as contacts, calendar appointments, etc. Location tracking. Access to the device's internal camera and/or microphone. Access to biometric sensors, including fingerprint readers and other health sensors.. Internet access. Access to communications interfaces (including their hardware identifiers and signal strength where applicable, and requests to enable them), such as Bluetooth, Wi-Fi, NFC, and others. Making and receiving phone calls. Sending and reading text messages The ability to perform in-app purchases. The ability to "overlay" themselves within other apps. Installing, deleting and otherwise managing applications. Authentication tokens (e.g., OAuth tokens) from web services stored in system storage for sharing between apps. Prior to Android 6.0 "Marshmallow", permissions were automatically granted to apps at runtime, and they were presented upon installation in Google Play Store. Since Marshmallow, certain permissions now require the app to request permission at runtime by the user. These permissions may also be revoked at any time via Android's settings menu. Usage of permissions on Android are sometimes abused by app developers to gather personal information and deliver advertising; in particular, apps for using a phone's camera flash as a flashlight (which have grown largely redundant due to the integration of such functionality at the system level on later versions of Android) have been known to require a large array of unnecessary permissions beyond what is actually needed for the stated functionality. iOS imposes a similar requirement for permissions to be granted at runtime, with particular controls offered for enabling of Bluetooth, Wi-Fi, and location tracking. == WebPermissions == WebPermissions is a permission system for web browsers. When a web application needs some data behind permission, it must request it first. When it does it, a user sees a window asking him to make a choice. The choice is remembered, but can be cleared lately. Currently the following resources are controlled: geolocation desktop notifications service workers sensors audio capturing devices, like sound cards, and their model names and characteristics video capturing devices, like cameras, and their identifiers and characteristics == Analysis == The permission-based access control model assigns access privileges for certain data objects to application. This is a derivative of the discretionary access control model. The access permissions are usually granted in the context of a specific user on a specific device. Permissions are granted permanently with few automatic restrictions. In some cases permissions are implemented in 'all-or-nothing' approach: a user either has to grant all the required permissions to access the application or the user can not access the application. There is still a lack of transparency when the permission is used by a program or application to access the data protected by the permission access control mechanism. Even if a user can revoke a permission, the app can blackmail a user by refusing to operate, for example by just crashing or asking user to grant the permission again in order to access the application. The permission mechanism has been widely criticized by researchers for several reasons, including; Intransparency of personal data extraction and surveillance, including the creation of a false sense of security; End-user fatigue of micro-managing access permissions leading to a fatalistic acceptance of surveillance and intransparency; Massive data extraction and personal surveillance carried out once the permissions are granted. Some apps, such as XPrivacy and Mockdroid spoof data in order to act as a measure for privacy. Further transparency methods include longitudinal behavioural profiling and multiple-source privacy analysis of app data access.

  Read more →
• 

  Harris corner detector

  The Harris corner detector is a corner detection operator that is commonly used in computer vision algorithms to extract corners and infer features of an image. It was first introduced by Chris Harris and Mike Stephens in 1988 upon the improvement of Moravec's corner detector. Compared to its predecessor, Harris' corner detector takes the differential of the corner score into account with reference to direction directly, instead of using shifting patches for every 45 degree angles, and has been proved to be more accurate in distinguishing between edges and corners. Since then, it has been improved and adopted in many algorithms to preprocess images for subsequent applications. == Introduction == A corner is a point whose local neighborhood stands in two dominant and different edge directions. In other words, a corner can be interpreted as the junction of two edges, where an edge is a sudden change in image brightness. Corners are the important features in the image, and they are generally termed as interest points which are invariant to translation, rotation and illumination. Although corners are only a small percentage of the image, they contain the most important features in restoring image information, and they can be used to minimize the amount of processed data for motion tracking, image stitching, building 2D mosaics, stereo vision, image representation and other related computer vision areas. In order to capture the corners from the image, researchers have proposed many different corner detectors including the Kanade-Lucas-Tomasi (KLT) operator and the Harris operator which are most simple, efficient and reliable for use in corner detection. These two popular methodologies are both closely associated with and based on the local structure matrix. Compared to the Kanade-Lucas-Tomasi corner detector, the Harris corner detector provides good repeatability under changing illumination and rotation, and therefore, it is more often used in stereo matching and image database retrieval. Although there still exist drawbacks and limitations, the Harris corner detector is still an important and fundamental technique for many computer vision applications. == Development of Harris corner detection algorithm == Source: Without loss of generality, we will assume a grayscale 2-dimensional image is used. Let this image be given by I {\displaystyle I} . Consider taking an image patch ( x , y ) ∈ W {\displaystyle (x,y)\in W} (window) and shifting it by ( Δ x , Δ y ) {\displaystyle (\Delta x,\Delta y)} . The sum of squared differences (SSD) between these two patches, denoted f {\displaystyle f} , is given by: f ( Δ x , Δ y ) = ∑ ( x k , y k ) ∈ W ( I ( x k , y k ) − I ( x k + Δ x , y k + Δ y ) ) 2 {\displaystyle f(\Delta x,\Delta y)={\underset {(x_{k},y_{k})\in W}{\sum }}\left(I(x_{k},y_{k})-I(x_{k}+\Delta x,y_{k}+\Delta y)\right)^{2}} I ( x + Δ x , y + Δ y ) {\displaystyle I(x+\Delta x,y+\Delta y)} can be approximated by a Taylor expansion. Let I x {\displaystyle I_{x}} and I y {\displaystyle I_{y}} be the partial derivatives of I {\displaystyle I} , such that I ( x + Δ x , y + Δ y ) ≈ I ( x , y ) + I x ( x , y ) Δ x + I y ( x , y ) Δ y {\displaystyle I(x+\Delta x,y+\Delta y)\approx I(x,y)+I_{x}(x,y)\Delta x+I_{y}(x,y)\Delta y} This produces the approximation f ( Δ x , Δ y ) ≈ ∑ ( x , y ) ∈ W ( I x ( x , y ) Δ x + I y ( x , y ) Δ y ) 2 , {\displaystyle f(\Delta x,\Delta y)\approx {\underset {(x,y)\in W}{\sum }}\left(I_{x}(x,y)\Delta x+I_{y}(x,y)\Delta y\right)^{2},} which can be written in matrix form: f ( Δ x , Δ y ) ≈ ( Δ x Δ y ) M ( Δ x Δ y ) , {\displaystyle f(\Delta x,\Delta y)\approx {\begin{pmatrix}\Delta x&\Delta y\end{pmatrix}}M{\begin{pmatrix}\Delta x\\\Delta y\end{pmatrix}},} where M is the structure tensor, M = ∑ ( x , y ) ∈ W [ I x 2 I x I y I x I y I y 2 ] = [ ∑ ( x , y ) ∈ W I x 2 ∑ ( x , y ) ∈ W I x I y ∑ ( x , y ) ∈ W I x I y ∑ ( x , y ) ∈ W I y 2 ] {\displaystyle M={\underset {(x,y)\in W}{\sum }}{\begin{bmatrix}I_{x}^{2}&I_{x}I_{y}\\I_{x}I_{y}&I_{y}^{2}\end{bmatrix}}={\begin{bmatrix}{\underset {(x,y)\in W}{\sum }}I_{x}^{2}&{\underset {(x,y)\in W}{\sum }}I_{x}I_{y}\\{\underset {(x,y)\in W}{\sum }}I_{x}I_{y}&{\underset {(x,y)\in W}{\sum }}I_{y}^{2}\end{bmatrix}}} == Process of Harris corner detection algorithm == Commonly, Harris corner detector algorithm can be divided into five steps. Color to grayscale Spatial derivative calculation Structure tensor setup Harris response calculation Non-maximum suppression === Color to grayscale === If we use Harris corner detector in a color image, the first step is to convert it into a grayscale image, which will enhance the processing speed. The value of the gray scale pixel can be computed as a weighted sums of the values R, B and G of the color image, ∑ C ∈ { R , G , B } w C ⋅ C {\displaystyle \sum _{C\,\in \,\{R,G,B\}}w_{C}\cdot C} , where, e.g., w R = 0.299 , w G = 0.587 , w B = 1 − ( w R + w G ) = 0.114. {\displaystyle w_{R}=0.299,\ w_{G}=0.587,\ w_{B}=1-(w_{R}+w_{G})=0.114.} === Spatial derivative calculation === Next, we are going to find the derivative with respect to x and the derivative with respect to y, I x ( x , y ) {\displaystyle I_{x}(x,y)} and I y ( x , y ) {\displaystyle I_{y}(x,y)} . This can be approximated by applying Sobel operators. === Structure tensor setup === With I x ( x , y ) {\displaystyle I_{x}(x,y)} , I y ( x , y ) {\displaystyle I_{y}(x,y)} , we can construct the structure tensor M {\displaystyle M} . === Harris response calculation === For x ≪ y {\displaystyle x\ll y} , one has x ⋅ y x + y = x 1 1 + x / y ≈ x . {\displaystyle {\tfrac {x\cdot y}{x+y}}=x{\tfrac {1}{1+x/y}}\approx x.} In this step, we compute the smallest eigenvalue of the structure tensor using that approximation: λ min ≈ λ 1 λ 2 ( λ 1 + λ 2 ) = det ( M ) tr ⁡ ( M ) {\displaystyle \lambda _{\min }\approx {\frac {\lambda _{1}\lambda _{2}}{(\lambda _{1}+\lambda _{2})}}={\frac {\det(M)}{\operatorname {tr} (M)}}} with the trace t r ( M ) = m 11 + m 22 {\displaystyle \mathrm {tr} (M)=m_{11}+m_{22}} . Another commonly used Harris response calculation is shown as below, R = λ 1 λ 2 − k ( λ 1 + λ 2 ) 2 = det ( M ) − k tr ⁡ ( M ) 2 {\displaystyle R=\lambda _{1}\lambda _{2}-k(\lambda _{1}+\lambda _{2})^{2}=\det(M)-k\operatorname {tr} (M)^{2}} where k {\displaystyle k} is an empirically determined constant; k ∈ [ 0.04 , 0.06 ] {\displaystyle k\in [0.04,0.06]} . === Non-maximum suppression === In order to pick up the optimal values to indicate corners, we find the local maxima as corners within the window which is a 3 by 3 filter. == Improvement == Sources: Harris-Laplace Corner Detector Differential Morphological Decomposition Based Corner Detector Multi-scale Bilateral Structure Tensor Based Corner Detector == Applications == Image Alignment, Stitching and Registration 2D Mosaics Creation 3D Scene Modeling and Reconstruction Motion Detection Object Recognition Image Indexing and Content-based Retrieval Video Tracking

  Read more →
• 

  Tensor (machine learning)

  In machine learning, the term tensor informally refers to two different concepts: (i) a way of organizing data and (ii) a multilinear (tensor) transformation. Data may be organized in a multidimensional array (M-way array), informally referred to as a "data tensor"; however, in the strict mathematical sense, a tensor is a multilinear mapping over a set of domain vector spaces to a range vector space. Observations, such as images, movies, volumes, sounds, and relationships among words and concepts, stored in an M-way array ("data tensor"), may be analyzed either by artificial neural networks or tensor methods. Tensor decomposition factors data tensors into smaller tensors. Operations on data tensors can be expressed in terms of matrix multiplication and the Kronecker product. The computation of gradients, a crucial aspect of backpropagation, can be performed using software libraries such as PyTorch and TensorFlow. Computations are often performed on graphics processing units (GPUs) using CUDA, and on dedicated hardware such as Google's Tensor Processing Unit or Nvidia's Tensor core. These developments have greatly accelerated neural network architectures, and increased the size and complexity of models that can be trained. == History == A tensor is by definition a multilinear map. In mathematics, this may express a multilinear relationship between sets of algebraic objects. In physics, tensor fields, considered as tensors at each point in space, are useful in expressing mechanics such as stress or elasticity. In machine learning, the exact use of tensors depends on the statistical approach being used. In 2001, the field of signal processing and statistics were making use of tensor methods. Pierre Comon surveys the early adoption of tensor methods in the fields of telecommunications, radio surveillance, chemometrics and sensor processing. Linear tensor rank methods (such as, Parafac/CANDECOMP) analyzed M-way arrays ("data tensors") composed of higher order statistics that were employed in blind source separation problems to compute a linear model of the data. He noted several early limitations in determining the tensor rank and efficient tensor rank decomposition. In the early 2000s, multilinear tensor methods crossed over into computer vision, computer graphics and machine learning with papers by Vasilescu or in collaboration with Terzopoulos, such as Human Motion Signatures, TensorFaces TensorTextures and Multilinear Projection. Multilinear algebra, the algebra of higher-order tensors, is a suitable and transparent framework for analyzing the multifactor structure of an ensemble of observations and for addressing the difficult problem of disentangling the causal factors based on second order or higher order statistics associated with each causal factor. Tensor (multilinear) factor analysis disentangles and reduces the influence of different causal factors with multilinear subspace learning. When treating an image or a video as a 2- or 3-way array, i.e., "data matrix/tensor", tensor methods reduce spatial or time redundancies as demonstrated by Wang and Ahuja. Yoshua Bengio, Geoff Hinton and their collaborators briefly discuss the relationship between deep neural networks and tensor factor analysis beyond the use of M-way arrays ("data tensors") as inputs. One of the early uses of tensors for neural networks appeared in natural language processing. A single word can be expressed as a vector via Word2vec. Thus a relationship between two words can be encoded in a matrix. However, for more complex relationships such as subject-object-verb, it is necessary to build higher-dimensional networks. In 2009, the work of Sutskever introduced Bayesian Clustered Tensor Factorization to model relational concepts while reducing the parameter space. From 2014 to 2015, tensor methods become more common in convolutional neural networks (CNNs). Tensor methods organize neural network weights in a "data tensor", analyze and reduce the number of neural network weights. Lebedev et al. accelerated CNN networks for character classification (the recognition of letters and digits in images) by using 4D kernel tensors. == Definition == Let F {\displaystyle \mathbb {F} } be a field (such as the real numbers R {\displaystyle \mathbb {R} } or the complex numbers C {\displaystyle \mathbb {C} } ). A tensor T ∈ F I 1 × I 2 × … × I C {\displaystyle {\mathcal {T}}\in {\mathbb {F} }^{I_{1}\times I_{2}\times \ldots \times I_{C}}} is a multilinear transformation from a set of domain vector spaces to a range vector space: T : { F I 1 × F I 2 × … F I C } ↦ F I 0 {\displaystyle {\mathcal {T}}:\{{\mathbb {F} }^{I_{1}}\times {\mathbb {F} }^{I_{2}}\times \ldots {\mathbb {F} }^{I_{C}}\}\mapsto {\mathbb {F} }^{I_{0}}} Here, C {\displaystyle C} and I 0 , I 1 , … , I C {\displaystyle I_{0},I_{1},\ldots ,I_{C}} are positive integers, and ( C + 1 ) {\displaystyle (C+1)} is the number of modes of a tensor (also known as the number of ways of a multi-way array). The dimensionality of mode c {\displaystyle c} is I c {\displaystyle I_{c}} , for 0 ≤ c ≤ C {\displaystyle 0\leq c\leq C} . In statistics and machine learning, an image is vectorized when viewed as a single observation, and a collection of vectorized images is organized as a "data tensor". For example, a set of facial images { d i p , i e , i l , i v ∈ R I X } {\displaystyle \{{\mathbb {d} }_{i_{p},i_{e},i_{l},i_{v}}\in {\mathbb {R} }^{I_{X}}\}} with I X {\displaystyle I_{X}} pixels that are the consequences of multiple causal factors, such as a facial geometry i p ( 1 ≤ i p ≤ I P ) {\displaystyle i_{p}(1\leq i_{p}\leq I_{P})} , an expression i e ( 1 ≤ i e ≤ I E ) {\displaystyle i_{e}(1\leq i_{e}\leq I_{E})} , an illumination condition i l ( 1 ≤ i l ≤ I L ) {\displaystyle i_{l}(1\leq i_{l}\leq I_{L})} , and a viewing condition i v ( 1 ≤ i v ≤ I V ) {\displaystyle i_{v}(1\leq i_{v}\leq I_{V})} may be organized into a data tensor (ie. multiway array) D ∈ R I X × I P × I E × I L × V {\displaystyle {\mathcal {D}}\in {\mathbb {R} }^{I_{X}\times I_{P}\times I_{E}\times I_{L}\times V}} where I P {\displaystyle I_{P}} are the total number of facial geometries, I E {\displaystyle I_{E}} are the total number of expressions, I L {\displaystyle I_{L}} are the total number of illumination conditions, and I V {\displaystyle I_{V}} are the total number of viewing conditions. Tensor factorizations methods such as TensorFaces and multilinear (tensor) independent component analysis factorizes the data tensor into a set of vector spaces that span the causal factor representations, where an image is the result of tensor transformation T {\displaystyle {\mathcal {T}}} that maps a set of causal factor representations to the pixel space. Another approach to using tensors in machine learning is to embed various data types directly. For example, a grayscale image, commonly represented as a discrete 2-way array D ∈ R I R X × I C X {\displaystyle {\mathbf {D} }\in {\mathbb {R} }^{I_{RX}\times I_{CX}}} with dimensionality I R X × I C X {\displaystyle I_{RX}\times I_{CX}} where I R X {\displaystyle I_{RX}} are the number of rows and I C X {\displaystyle I_{CX}} are the number of columns. When an image is treated as 2-way array or 2nd order tensor (i.e. as a collection of column/row observations), tensor factorization methods compute the image column space, the image row space and the normalized PCA coefficients or the ICA coefficients. Similarly, a color image with RGB channels, D ∈ R N × M × 3 . {\displaystyle {\mathcal {D}}\in \mathbb {R} ^{N\times M\times 3}.} may be viewed as a 3rd order data tensor or 3-way array.-------- In natural language processing, a word might be expressed as a vector v {\displaystyle v} via the Word2vec algorithm. Thus v {\displaystyle v} becomes a mode-1 tensor v ↦ A ∈ R N . {\displaystyle v\mapsto {\mathcal {A}}\in \mathbb {R} ^{N}.} The embedding of subject-object-verb semantics requires embedding relationships among three words. Because a word is itself a vector, subject-object-verb semantics could be expressed using mode-3 tensors v a × v b × v c ↦ A ∈ R N × N × N . {\displaystyle v_{a}\times v_{b}\times v_{c}\mapsto {\mathcal {A}}\in \mathbb {R} ^{N\times N\times N}.} In practice the neural network designer is primarily concerned with the specification of embeddings, the connection of tensor layers, and the operations performed on them in a network. Modern machine learning frameworks manage the optimization, tensor factorization and backpropagation automatically. === As unit values === Tensors may be used as the unit values of neural networks which extend the concept of scalar, vector and matrix values to multiple dimensions. The output value of single layer unit y m {\displaystyle y_{m}} is the sum-product of its input units and the connection weights filtered through the activation function f {\displaystyle f} : y m = f ( ∑ n x n u m , n ) , {\displaystyle y_{m}=f\left(\sum _{n}x_{n}u_{m,n}\right),} where y m ∈ R .

  Read more →
• 

  ACL Data Collection Initiative

  The ACL Data Collection Initiative (ACL/DCI) was a project established in 1989 by the Association for Computational Linguistics (ACL) to create and distribute large text and speech corpora for computational linguistics research. The initiative aimed to address the growing need for substantial text databases that could support research in areas such as natural language processing, speech recognition, and computational linguistics. By 1993, the initiative’s activities had effectively ceased, with its functions and datasets absorbed by the Linguistic Data Consortium (LDC), which was founded in 1992. == Objectives == The ACL/DCI had several key objectives: To acquire a large and diverse text corpus from various sources To transform the collected texts into a common format based on the Standard Generalized Markup Language (SGML) To make the corpus available for scientific research at low cost with minimal restrictions To provide a common database that would allow researchers to replicate or extend published results To reduce duplication of effort among researchers in obtaining and preparing text data These objectives were designed to address the growing demand for very large amounts of text arising from applications in recognition and analysis of text and speech. Its core objective was to "oversee the acquisition and preparation of a large text corpus to be made available for scientific research at cost and without royalties". == History == By the late 1980s, researchers in computational linguistics and speech recognition faced a significant problem: the lack of large-scale, accessible text corpora for developing statistical models and testing algorithms. Existing generally available text databases were too small to meet the needs of developing applications in text and speech recognition. The initiative was formed to meet this need by collecting, standardizing, and distributing large quantities of text data with minimal restrictions for scientific research. As stated by Liberman (1990), "research workers have been severely hampered by the lack of appropriate materials, and specially by the lack of a large enough body of text on which published results can be replicated or extended by others." The ACL/DCI committee was established in February 1989. The committee included members from academic and industrial research laboratories in the United States and Europe. The initiative was chaired by Mark Liberman from the University of Pennsylvania (formerly of AT&T Bell Laboratories). Other committee members included representatives from organizations such as Bellcore, IBM T.J. Watson Research Center, Cambridge University, Virginia Polytechnic Institute & State University, Northeastern University, University of Pennsylvania, SRI International, MCC, Xerox PARC, ISSCO, and University of Pisa. The project operated initially without dedicated funding, relying on volunteer efforts from committee members and their affiliated institutions. Key supporters included AT&T Bell Labs, Bellcore, IBM, Xerox, and the University of Pennsylvania, which allowed the use of their computing facilities for ACL/DCI-related work. Previously running on volunteer effort pro bono, in 1991, it obtained funding from General Electric and the National Science Foundation (IRI-9113530). == Data == As of 1990, the ACL/DCI had collected hundreds of millions of words of diverse text. The collection included: Wall Street Journal articles (25 to 50 million words); Canadian Hansard (parliamentary records) in parallel English and French versions: cleaned-up English Hansard donated by the IBM alignment models group (100 million words), and original Bilingual Hansard (from a different time period) obtained directly (200 million words). Collins English Dictionary (1979 edition), both as fulltext (3 million words) and as various "database" versions, constructed using "typographers' tape" donated by Collins, which were computer tapes containing the structured digital data used to typeset and print the 1979 edition of the dictionary; Emails from ARPANET newsletters for the ACM Special Interest Group on Information Retrieval Forum (IRLIST) and AIList Digest issues distributed over the ARPANET (AILIST) (5 million words), both collected by Edward A. Fox at VIPSU; Articles on networking (2 million words); U.S. Department of Agriculture Extension Service Fact Sheets (>1 million words); 200,000 scientific abstracts of about 1,500 words each from the Department of Energy (25 million words); Archives of the Challenger Investigation Commission, including transcripts of depositions and hearings (2.5 million words); Books from the Library of America, including works by Mark Twain, Eugene O'Neill, Ralph Waldo Emerson, Herman Melville, W.E.B. DuBois, Willa Cather, and Benjamin Franklin (130 books, 20 million words); Public domain books like the King James Bible, Tristram Shandy, The Federalist Papers; Several million words of transcribed radiologists' reports, donated by Francis Ganong at Kurzweil Applied Intelligence Inc (about 5 million words); The Child Language Data Exchange corpus of child language acquisition transcripts; U.S. Department of Justice Justice Retrieval and Inquiry System (JURIS) materials; The Swiss Civil Code in parallel German, French and Italian; Economic reports from the Union Bank of Switzerland, in parallel English, German, French and Italian; About 12K words of administrative policy manuals and 14K words of administrative memos, contributed by Geoff Pullum of U.C.S.C.; Material from various ACM journals and the ACL journal Computational Linguistics; The CSLI publications series: 50-100 reports (8K words each) and 5-10 books (80K words each). The initiative started with North American English text but expanded to include Canadian French and planned to include Japanese, Chinese, and other Asian languages. At least 5 million words from the collection were tagged under the Penn Treebank project, and those tags were distributed by DCI as well. After DCI was absorbed by the LDC, the datasets were curated under LDC. == Format == The ACL/DCI corpus was coded in a standard form based on SGML (Standard Generalized Markup Language, ISO 8879), consistent with the recommendations of the Text Encoding Initiative (TEI), of which the DCI was an affiliated project. The TEI was a joint project of the ACL, the Association for Computers and the Humanities, and the Association for Literary and Linguistic Computing, aiming to provide a common interchange format for literary and linguistic data. The initiative planned to add annotations reflecting consensually approved linguistic features like part of speech and various aspects of syntactic and semantic structure over time. == Examples == As an example of the use of ACL/DCI, consider the Wall Street Journal (WSJ) corpus for speech recognition research. The WSJ corpus was used as the basis for the DARPA Spoken Language System (SLS) community's Continuous Speech Recognition (CSR) Corpus. The WSJ corpus became a standard benchmark for evaluating speech recognition systems and has been used in numerous research papers. The WSJ CSR Corpus provided DARPA with its first general-purpose English, large vocabulary, natural language, high perplexity corpus containing speech (400 hours) and text (47 million words) during 1987–89. The text corpus was 313 MB in size. The text was preprocessed to remove ambiguity in the word sequence that a reader might choose, ensuring that the unread text used to train language models was representative of the spoken test material. The preprocessing included converting numbers into orthographics, expanding abbreviations, resolving apostrophes and quotation marks, and marking punctuation. As another example, the Yarowsky algorithm used bitext data from DCI to train a simple word-sense disambiguation model that was competitive with advanced models trained on smaller datasets. == Distribution == Materials from the ACL/DCI collection were distributed to research groups on a non-commercial basis. By 1990, about 25 research groups and individual researchers had received tapes containing various portions of the collected material. To obtain the data, researchers had to sign an agreement not to redistribute the data or make direct commercial use of it. However, commercial application of "analytical materials" derived from the text, such as statistical tables or grammar rules, was explicitly permitted. The initiative first distributed data via 12-inch reels of 9-track tape, then via CD-ROMs. Each such tape could contain 30 million words compressed via the Lempel-Ziv algorithms. The first CD-ROM distribution was in 1991, funded by Dragon Systems Inc. It contained Collins English Dictionary, WSJ, scientific abstracts provided by the U.S. Department of Energy, and the Penn Treebank.

  Read more →
• 

  Sparrow (chatbot)

  Sparrow is a chatbot developed by the artificial intelligence research lab DeepMind, a subsidiary of Alphabet Inc. It is designed to answer users' questions correctly, while reducing the risk of unsafe and inappropriate answers. One motivation behind Sparrow is to address the problem of language models producing incorrect, biased or potentially harmful outputs. Sparrow is trained using human judgements, in order to be more “Helpful, Correct and Harmless” compared to baseline pre-trained language models. The development of Sparrow involved asking paid study participants to interact with Sparrow, and collecting their preferences to train a model of how useful an answer is. To improve accuracy and help avoid the problem of hallucinating incorrect answers, Sparrow has the ability to search the Internet using Google Search in order to find and cite evidence for any factual claims it makes. To make the model safer, its behaviour is constrained by a set of rules, for example "don't make threatening statements" and "don't make hateful or insulting comments", as well as rules about possibly harmful advice, and not claiming to be a person. During development study participants were asked to converse with the system and try to trick it into breaking these rules. A 'rule model' was trained on judgements from these participants, which was used for further training. Sparrow was introduced in a paper in September 2022, titled "Improving alignment of dialogue agents via targeted human judgements"; however, the bot was not released publicly. DeepMind CEO Demis Hassabis said DeepMind is considering releasing Sparrow for a "private beta" some time in 2023. == Training == Sparrow is a deep neural network based on the transformer machine learning model architecture. It is fine-tuned from DeepMind's Chinchilla AI pre-trained large language model (LLM), which has 70 Billion parameters. Sparrow is trained using reinforcement learning from human feedback (RLHF), although some supervised fine-tuning techniques are also used. The RLHF training utilizes two reward models to capture human judgements: a “preference model” that predicts what a human study participant would prefer and a “rule model” that predicts if the model has broken one of the rules. == Limitations == Sparrow's training data corpus is mainly in English, meaning it performs worse in other languages. When adversarially probed by study participants it breaks the rules 8% of the time; however, this is still three times lower than the baseline prompted pre-trained model (Chinchilla).

  Read more →
• 

  Automatic summarization

  Automatic summarization is the process of shortening a set of data computationally, to create a subset (a summary) that represents the most important or relevant information within the original content. Artificial intelligence (AI) algorithms are commonly developed and employed to achieve this, specialized for different types of data. Text summarization is usually implemented by natural language processing methods, designed to locate the most informative sentences in a given document. On the other hand, visual content can be summarized using computer vision algorithms. Image summarization is the subject of ongoing research; existing approaches typically attempt to display the most representative images from a given image collection, or generate a video that only includes the most important content from the entire collection. Video summarization algorithms identify and extract from the original video content the most important frames (key-frames), and/or the most important video segments (key-shots), normally in a temporally ordered fashion. Video summaries simply retain a carefully selected subset of the original video frames and, therefore, are not identical to the output of video synopsis algorithms, where new video frames are being synthesized based on the original video content. == Commercial products == In 2022 Google Docs released an automatic summarization feature. == Approaches == There are two general approaches to automatic summarization: extraction and abstraction. === Extraction-based summarization === Here, content is extracted from the original data, but the extracted content is not modified in any way. Examples of extracted content include key-phrases that can be used to "tag" or index a text document, or key sentences (including headings) that collectively comprise an abstract, and representative images or video segments, as stated above. For text, extraction is analogous to the process of skimming, where the summary (if available), headings and subheadings, figures, the first and last paragraphs of a section, and optionally the first and last sentences in a paragraph are read before one chooses to read the entire document in detail. Other examples of extraction that include key sequences of text in terms of clinical relevance (including patient/problem, intervention, and outcome). === Abstractive-based summarization === Abstractive summarization methods generate new text that did not exist in the original text. This has been applied mainly for text. Abstractive methods build an internal semantic representation of the original content (often called a language model), and then use this representation to create a summary that is closer to what a human might express. Abstraction may transform the extracted content by paraphrasing sections of the source document, to condense a text more strongly than extraction. Such transformation, however, is computationally much more challenging than extraction, involving both natural language processing and often a deep understanding of the domain of the original text in cases where the original document relates to a special field of knowledge. "Paraphrasing" is even more difficult to apply to images and videos, which is why most summarization systems are extractive. === Aided summarization === Approaches aimed at higher summarization quality rely on combined software and human effort. In Machine Aided Human Summarization, extractive techniques highlight candidate passages for inclusion (to which the human adds or removes text). In Human Aided Machine Summarization, a human post-processes software output, in the same way that one edits the output of automatic translation by Google Translate. == Applications and systems for summarization == There are broadly two types of extractive summarization tasks depending on what the summarization program focuses on. The first is generic summarization, which focuses on obtaining a generic summary or abstract of the collection (whether documents, or sets of images, or videos, news stories etc.). The second is query relevant summarization, sometimes called query-based summarization, which summarizes objects specific to a query. Summarization systems are able to create both query relevant text summaries and generic machine-generated summaries depending on what the user needs. An example of a summarization problem is document summarization, which attempts to automatically produce an abstract from a given document. Sometimes one might be interested in generating a summary from a single source document, while others can use multiple source documents (for example, a cluster of articles on the same topic). This problem is called multi-document summarization. A related application is summarizing news articles. Imagine a system, which automatically pulls together news articles on a given topic (from the web), and concisely represents the latest news as a summary. Image collection summarization is another application example of automatic summarization. It consists in selecting a representative set of images from a larger set of images. A summary in this context is useful to show the most representative images of results in an image collection exploration system. Video summarization is a related domain, where the system automatically creates a trailer of a long video. This also has applications in consumer or personal videos, where one might want to skip the boring or repetitive actions. Similarly, in surveillance videos, one would want to extract important and suspicious activity, while ignoring all the boring and redundant frames captured. At a very high level, summarization algorithms try to find subsets of objects (like set of sentences, or a set of images), which cover information of the entire set. This is also called the core-set. These algorithms model notions like diversity, coverage, information and representativeness of the summary. Query based summarization techniques, additionally model for relevance of the summary with the query. Some techniques and algorithms which naturally model summarization problems are TextRank and PageRank, Submodular set function, Determinantal point process, maximal marginal relevance (MMR) etc. === Keyphrase extraction === The task is the following. You are given a piece of text, such as a journal article, and you must produce a list of keywords or key[phrase]s that capture the primary topics discussed in the text. In the case of research articles, many authors provide manually assigned keywords, but most text lacks pre-existing keyphrases. For example, news articles rarely have keyphrases attached, but it would be useful to be able to automatically do so for a number of applications discussed below. Consider the example text from a news article: "The Army Corps of Engineers, rushing to meet President Bush's promise to protect New Orleans by the start of the 2006 hurricane season, installed defective flood-control pumps last year despite warnings from its own expert that the equipment would fail during a storm, according to documents obtained by The Associated Press". A keyphrase extractor might select "Army Corps of Engineers", "President Bush", "New Orleans", and "defective flood-control pumps" as keyphrases. These are pulled directly from the text. In contrast, an abstractive keyphrase system would somehow internalize the content and generate keyphrases that do not appear in the text, but more closely resemble what a human might produce, such as "political negligence" or "inadequate protection from floods". Abstraction requires a deep understanding of the text, which makes it difficult for a computer system. Keyphrases have many applications. They can enable document browsing by providing a short summary, improve information retrieval (if documents have keyphrases assigned, a user could search by keyphrase to produce more reliable hits than a full-text search), and be employed in generating index entries for a large text corpus. Depending on the different literature and the definition of key terms, words or phrases, keyword extraction is a highly related theme. ==== Supervised learning approaches ==== Beginning with the work of Turney, many researchers have approached keyphrase extraction as a supervised machine learning problem. Given a document, we construct an example for each unigram, bigram, and trigram found in the text (though other text units are also possible, as discussed below). We then compute various features describing each example (e.g., does the phrase begin with an upper-case letter?). We assume there are known keyphrases available for a set of training documents. Using the known keyphrases, we can assign positive or negative labels to the examples. Then we learn a classifier that can discriminate between positive and negative examples as a function of the features. Some classifiers make a binary classification for a test example, while others assign a probability of being a keyphrase. For ins

  Read more →
• 

  FedRAMP

  The Federal Risk and Authorization Management Program (FedRAMP) is a United States federal government-wide compliance program that provides a standardized approach to security assessment, authorization, and continuous monitoring for cloud products and services. The US government describes FedRAMP as FISMA for the cloud. == Overview == The FedRAMP PMO mission is to promote the adoption of secure cloud services across the federal government by providing a standardized approach to security and risk assessment. Per the OMB memorandum, any cloud services that hold federal data must be FedRAMP authorized. FedRAMP prescribes the security requirements and processes that cloud service providers must follow in order for the government to use their service. There are two ways to authorize a cloud service through FedRAMP: a Joint Authorization Board (JAB) provisional authorization (P-ATO), and through individual agencies. FedRAMP provides accreditation for cloud services for the various cloud offering models which are Infrastructure as a Service (IaaS), Platform as a Service (PaaS), and Software as a Service, (SaaS). == History == In 2011, the Office of Management and Budget (OMB) released a memorandum establishing FedRAMP "to provide a cost-effective, risk-based approach for the adoption and use of cloud services to Executive departments and agencies." The General Services Administration (GSA) established the FedRAMP Program Management Office (PMO) in June 2012. Before the introduction of FedRAMP, individual federal agencies managed their own assessment methodologies following guidance set by the Federal Information Security Management Act of 2002. == Governance and applicable laws == FedRAMP is governed by different Executive Branch entities that collaborate to develop, manage, and operate the program. These entities include: The Office of Management and Budget (OMB): The governing body that issued the FedRAMP policy memo, which defines the key requirements and capabilities of the program The Joint Authorization Board (JAB): The primary governance and decision-making body for FedRAMP comprises the chief information officers (CIOs) from the Department of Homeland Security (DHS), General Services Administration (GSA), and Department of Defense (DOD) The National Institute of Standards and Technology (NIST): Advises FedRAMP on FISMA compliance requirements and assists in developing the standards for the accreditation of independent 3PAOs The Department of Homeland Security (DHS): Manages the FedRAMP continuous monitoring strategy including data feed criteria, reporting structure, threat notification coordination, and incident response The Federal Chief Information Officers (CIO) Council: Disseminates FedRAMP information to Federal CIOs and other representatives through cross-agency communications and events The FedRAMP PMO: Established within GSA and responsible for the development of the FedRAMP program, including the management of day-to-day operations There are several laws, mandates, and policies that are foundational to FedRAMP. FISMA–the Federal Information Security Modernization Act–requires that agencies authorize the information systems that they use. The US government describes FedRAMP as FISMA for the cloud. The FedRAMP Policy Memo requires federal agencies to use FedRAMP when assessing, authorizing, and continuously monitoring cloud services in order to aid agencies in the authorization process as well as save government resources and eliminate duplicative efforts. FedRAMP's security baselines are derived from NIST SP 800-53 (as revised) with a set of control enhancements that pertain to the unique security requirements of cloud computing. == Third-party assessment organizations == Third-party assessment organizations (3PAOs) play a critical role in the FedRAMP security assessment process, as they are the independent assessment organizations that verify cloud providers' security implementations and provide the overall risk posture of a cloud environment for a security authorization decision. Accredited by the American Association for Laboratory Accreditation (A2LA), these assessment organizations must demonstrate independence and the technical competence required to test security implementations and collect representative evidence. == FedRAMP Marketplace == The FedRAMP Marketplace provides a searchable, sortable database of Cloud Service Offerings (CSOs) that have achieved a FedRAMP designation. 3PAOs, accredited auditors that can perform the FedRAMP assessment, are listed within the Marketplace. The FedRAMP Marketplace is maintained by the FedRAMP Program Management Office (PMO). == Security and authorization concerns == A 2026 ProPublica investigation found that FedRAMP entered into a partnership with Microsoft despite considerable concerns about the security of its cloud technology.

  Read more →
• 

  XLNet

  The XLNet was an autoregressive Transformer designed as an improvement over BERT, with 340M parameters and trained on 33 billion words. It was released on 19 June 2019, under the Apache 2.0 license. It achieved state-of-the-art results on a variety of natural language processing tasks, including language modeling, question answering, and natural language inference. == Architecture == The main idea of XLNet is to model language autoregressively like the GPT models, but allow for all possible permutations of a sentence. Concretely, consider the following sentence:My dog is cute.In standard autoregressive language modeling, the model would be tasked with predicting the probability of each word, conditioned on the previous words as its context: We factorize the joint probability of a sequence of words x 1 , … , x T {\displaystyle x_{1},\ldots ,x_{T}} using the chain rule: Pr ( x 1 , … , x T ) = Pr ( x 1 ) Pr ( x 2 | x 1 ) Pr ( x 3 | x 1 , x 2 ) … Pr ( x T | x 1 , … , x T − 1 ) . {\displaystyle \Pr(x_{1},\ldots ,x_{T})=\Pr(x_{1})\Pr(x_{2}|x_{1})\Pr(x_{3}|x_{1},x_{2})\ldots \Pr(x_{T}|x_{1},\ldots ,x_{T-1}).} For example, the sentence "My dog is cute" is factorized as: Pr ( My , dog , is , cute ) = Pr ( My ) Pr ( dog | My ) Pr ( is | My , dog ) Pr ( cute | My , dog , is ) . {\displaystyle \Pr({\text{My}},{\text{dog}},{\text{is}},{\text{cute}})=\Pr({\text{My}})\Pr({\text{dog}}|{\text{My}})\Pr({\text{is}}|{\text{My}},{\text{dog}})\Pr({\text{cute}}|{\text{My}},{\text{dog}},{\text{is}}).} Schematically, we can write it as → My → My dog → My dog is → My dog is cute . {\displaystyle {\texttt {}}{\texttt {}}{\texttt {}}{\texttt {}}\to {\text{My }}{\texttt {}}{\texttt {}}{\texttt {}}\to {\text{My dog }}{\texttt {}}{\texttt {}}\to {\text{My dog is }}{\texttt {}}\to {\text{My dog is cute}}.} However, for XLNet, the model is required to predict the words in a randomly generated order. Suppose we have sampled a randomly generated order 3241, then schematically, the model is required to perform the following prediction task: → is → dog is → dog is cute → My dog is cute {\displaystyle {\texttt {}}{\texttt {}}{\texttt {}}{\texttt {}}\to {\texttt {}}{\texttt {}}{\text{is }}{\texttt {}}\to {\texttt {}}{\text{dog is }}{\texttt {}}\to {\texttt {}}{\text{dog is cute}}\to {\text{My dog is cute}}} By considering all permutations, XLNet is able to capture longer-range dependencies and better model the bidirectional context of words. === Two-Stream Self-Attention === To implement permutation language modeling, XLNet uses a two-stream self-attention mechanism. The two streams are: Content stream: This stream encodes the content of each word, as in standard causally masked self-attention. Query stream: This stream encodes the content of each word in the context of what has gone before. In more detail, it is a masked cross-attention mechanism, where the queries are from the query stream, and the key-value pairs are from the content stream. The content stream uses the causal mask M causal = [ 0 − ∞ − ∞ … − ∞ 0 0 − ∞ … − ∞ 0 0 0 … − ∞ ⋮ ⋮ ⋮ ⋱ ⋮ 0 0 0 … 0 ] {\displaystyle M_{\text{causal}}={\begin{bmatrix}0&-\infty &-\infty &\dots &-\infty \\0&0&-\infty &\dots &-\infty \\0&0&0&\dots &-\infty \\\vdots &\vdots &\vdots &\ddots &\vdots \\0&0&0&\dots &0\end{bmatrix}}} permuted by a random permutation matrix to P M causal P − 1 {\displaystyle PM_{\text{causal}}P^{-1}} . The query stream uses the cross-attention mask P ( M causal − ∞ I ) P − 1 {\displaystyle P(M_{\text{causal}}-\infty I)P^{-1}} , where the diagonal is subtracted away specifically to avoid the model "cheating" by looking at the content stream for what the current masked token is. Like the causal masking for GPT models, this two-stream masked architecture allows the model to train on all tokens in one forward pass. == Training == Two models were released: XLNet-Large, cased: 110M parameters, 24-layer, 1024-hidden, 16-heads XLNet-Base, cased: 340M parameters, 12-layer, 768-hidden, 12-heads. It was trained on a dataset that amounted to 32.89 billion tokens after tokenization with SentencePiece. The dataset was composed of BooksCorpus, and English Wikipedia, Giga5, ClueWeb 2012-B, and Common Crawl. It was trained on 512 TPU v3 chips, for 5.5 days. At the end of training, it still under-fitted the data, meaning it could have achieved lower loss with more training. It took 0.5 million steps with an Adam optimizer, linear learning rate decay, and a batch size of 8192.

  Read more →
• 

  GasBuddy

  GasBuddy is a technology company headquartered in Dallas, United States, that offers mobile applications and websites for tracking crowd-sourced locations and prices of gas stations and convenience stores in the United States and Canada. Their platforms offer information sourced from users, gas station operators, and partner companies. They also provide business-to-business services to gas stations and convenience store owners. == History == GasBuddy was founded in Minneapolis in 2000 by Dustin Coupal, Jason Toews as a community website for sharing gas prices. In 2004, they filed as a for-profit corporation in Minnesota under the name GasBuddy Organization Inc. In 2009, GasBuddy launched OpenStore, a platform that allows convenience stores to build and manage their own mobile apps. In 2010, the company launched its own mobile apps that allowed users to input gas prices from their smartphones. In 2013, Oil Price Information Service (OPIS), a subsidiary of UCG, acquired GasBuddy. OPIS is a provider of petroleum pricing and news for businesses. In 2016, IHS acquired OPIS, separating from GasBuddy, which remained with UCG as a subsidiary company. Initially only available in the United States and Canada, GasBuddy launched in Australia in March 2016. Also in that year, GasBuddy released a completely redesigned app, its first major redesign since its release in 2010. GasBuddy also unveiled a new logo and launched GasBuddy Business Pages. GasBuddy shut down the Australian version of their app in 2022. In 2017, GasBuddy launched a gas savings program titled "Pay with GasBuddy" intended to let consumers save at gas stations in the United States. In the same year, GasBuddy was involved in a lawsuit with Reveal Mobile, a location-based marketing company, over the sale of user location data. It was revealed that GasBuddy sold information on more than 4.5 million users to Reveal each month for $9.50 per 1000 users. According to CNET, that information included "users' latitude, longitude, IP address, and time stamps on the data collected," which sparked concern in the media and between its users. In 2021, the GasBuddy app rose to the most popular app on both Android and iPhone platforms in the wake of the Colonial Pipeline ransomware attack PDI acquired GasBuddy in 2021.

  Read more →
• 

  Cloem

  Cloem is a company based in Cannes, France, which applies natural language processing (NLP) technologies to assist patent applicants in creating variants of patent claims, called "cloems". According to the company, these "computer-generated claims can be published to keep potential competitors from attempting to file adjacent patent claims." == Technology == According to Cloem, dictionaries, ontologies and proprietary claim-drafting algorithms are used to draft alternative claims based on a client's original set of claims. In particular, the original set of claims is subject to various permutations and linguistic manipulations "by considering alternative definitions for terms as well as “synonyms, hyponyms, hyperonyms, meronyms, holonyms, and antonyms.”" == Possible uses == Cloem can optionally publish one or more created texts, as electronic publications or as paper-printed publications. These can potentially serve – through a defensive publication – as prior art to prevent another party for obtaining a patent on the subject-matter at stake. In other words, after an initial patent filing, an "improvement" patent (adjacent invention) can be applied for by another party, such as a competitor. By publishing variants of a patent claim, the risk of adverse patenting may potentially be decreased (improvement inventions may no longer be patentable). Cloems may also be potentially patentable. One of the issues of patentability, however, is that only a natural person can be a listed as an inventor on a patent. Since cloems are produced by a computer based on a person's input, it is not clear if the computer or the person is the inventor. The inventorship of Cloem texts is an open question.

  Read more →
• 

  Data classification (data management)

  Data classification is the process of organizing data into categories based on attributes like file type, content, or metadata. The data is then assigned class labels that describe a set of attributes for the corresponding data sets. The goal is to provide meaningful class attributes to former less structured information, enabling organizations to manage, protect, and govern their data more effectively. Data classification can be viewed as a multitude of labels that are used to define the type of data, especially on confidentiality and integrity issues. == Approaches == Classification techniques might be used for reports generated by ERP systems or where the data includes specific personal information that is identified. Many organizations also employ context-based classification that considers factors such as data source, user identity, and application context. == Regulatory frameworks == Data classification schemes are mandated or implied by numerous regulatory frameworks that require organizations to identify, categorize, and protect sensitive information according to its level of sensitivity. The Health Insurance Portability and Accountability Act (HIPAA) Security Rule requires covered entities to conduct an accurate and thorough assessment of potential risks and vulnerabilities to the confidentiality, integrity, and availability of protected health information under 45 CFR 164.308(a)(1)(ii)(A), which necessitates classification of data to distinguish protected health information from other organizational data."Security Standards: Administrative Safeguards". U.S. Department of Health and Human Services. Retrieved April 1, 2026. The December 2024 HIPAA Security Rule notice of proposed rulemaking (90 FR 898) would mandate comprehensive technology asset inventories and require mapping of how electronic protected health information moves through an organization, formalizing data classification as an explicit compliance obligation."HIPAA Security Rule To Strengthen the Cybersecurity of Electronic Protected Health Information". Federal Register. January 6, 2025. Retrieved April 1, 2026. NIST Special Publication 800-60 provides guidelines for mapping information types to security categories, establishing a structured methodology for federal agencies to classify data and apply appropriate security controls based on the potential impact of a security breach."NIST SP 800-60 Vol. 1 Rev. 1: Guide for Mapping Types of Information and Information Systems to Security Categories". National Institute of Standards and Technology. August 2008. Retrieved April 1, 2026.

  Read more →
• 

  Deep Learning Indaba

  The Deep Learning Indaba is an annual conference and educational event that aims to strengthen machine learning and artificial intelligence (AI) capacity across Africa. Launched in 2017, it brings together students, researchers, industry practitioners, and policymakers from across the African continent. == History == The Deep Learning Indaba began in 2017 at the University of the Witwatersrand with over 300 participants from 23 African countries, offering tutorials in advanced AI topics and featuring notable speakers like Nando de Freitas. In 2018, it expanded to 650 delegates at Stellenbosch University, introducing parallel sessions to encourage collaboration. The 2019 edition in Nairobi, Kenya, reflected further growth, with increasing sponsorship and support from major tech companies like Google and Microsoft. === Deep Learning IndabaX ===

  Read more →
• 

  Quantum natural language processing

  Quantum natural language processing (QNLP) is the application of quantum computing to natural language processing (NLP). It computes word embeddings as parameterised quantum circuits that can solve NLP tasks faster than any classical computer. It is inspired by categorical quantum mechanics and the DisCoCat framework, making use of string diagrams to translate from grammatical structure to quantum processes. == Theory == The first quantum algorithm for natural language processing used the DisCoCat framework and Grover's algorithm to show a quadratic quantum speedup for a text classification task. It was later shown that quantum language processing is BQP-Complete, i.e. quantum language models are more expressive than their classical counterpart, unless quantum mechanics can be efficiently simulated by classical computers. These two theoretical results assume fault-tolerant quantum computation and a QRAM, i.e. an efficient way to load classical data on a quantum computer. Thus, they are not applicable to the noisy intermediate-scale quantum (NISQ) computers available today. == Experiments == The algorithm of Zeng and Coecke was adapted to the constraints of NISQ computers and implemented on IBM quantum computers to solve binary classification tasks. Instead of loading classical word vectors onto a quantum memory, the word vectors are computed directly as the parameters of quantum circuits. These parameters are optimised using methods from quantum machine learning to solve data-driven tasks such as question answering, machine translation and even algorithmic music composition.

  Read more →