AI Generator Quizlet

AI Generator Quizlet — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

• 

  Healthy Together

  Healthy Together is a health technology company that provides software for Health & Humans Services Departments. Healthy Together supports a “One Door” approach to eligibility, enrollment, and management for programs like Medicaid, Supplemental Nutrition Assistance Program, TANF and WIC, as well as behavioral health (988), disease surveillance, vital records, child welfare and more. The platform's use is to increase the reach and efficacy of program initiatives, improve health equity and reduce cost. Software is available in the United States of America with current deployments in Florida, Oklahoma. The United States Department of Veterans Affairs also utilizes Healthy Together's mobile platform. == Development == Healthy Together launched in March 2020 and builds software for public health and health and human services departments. The Florida Department of Health began using the platform in September 2020 to deliver real-time test results to residents. Over 50% of households in Florida have adopted the mobile application. On December 6, 2022, the Advanced Technology Academic Research Center (ATARC) awarded Healthy Together and the State of Florida's Department of Health with a Digital Experience Award at their 2022 GITEC Emerging Technology Award Ceremony in Washington, D.C. to recognize success of the project. The partnership was also highlighted on the Federal News Network's show Federal Drive. The platform is also used at universities in Oklahoma. In November 2022, the United States Department of Veterans Affairs and Healthy Together announced a collaboration to expand access to health records for Veterans. The platform provides 18 million Veterans with access to their health information through their smartphones and mobile devices. In December 2022, the integration was recognized as one of Healthcare IT News' Top 10 stories of 2022.

  Read more →
• 

  GNU social

  GNU social (and its predecessor StatusNet) is a largely defunct free and open-source microblogging social networking service that implements the OStatus and ActivityPub standards for interoperability between installations. While offering similar functionality to social networks such as Twitter, GNU social seeks to provide the ability for open and federated communication between different microblogging communities, known as 'instances'. Both enterprises and individuals can install and control their own instances and user data. At its peak in popularity, GNU social had been deployed on hundreds of interconnected instances, however has since fallen into disuse as competing software like Mastodon and Pleroma have taken its position as the dominant federated microblogging services. Later on in its lifespan, the project split into two separate branches, with "v2" being a continuation of the original codebase for maintenance of existing instances, with "v3" being a complete redesign of the project meant to integrate further ActivityPub support and modernization of the user experience and its technological back-end. As of August 15, 2022, there had been no new commits to the v2 branch, with the v3 branch also no longer being actively developed not long after by November 25, 2022, with the project essentially abandoned. Despite its modern obsolescence and dated design compared to modern platforms, GNU social and StatusNet is regarded to be the origin of the Fediverse network and has had a major influence on the design of more modern decentralized social networks that succeeded it. == History == While being the main project within its lineage, GNU social originally began as a fork of StatusNet. The software was first developed for a service called identi.ca from Evan Prodromou, which offered free microblogging accounts to the public. The software quickly became one of the first popular examples of a decentralized social network, as identi.ca allowed any other server that was running the software to communicate with it, something which had not previously been attempted before in social media at such a large scale. === StatusNet === Originally, StatusNet (named Laconica at the time) was launched with a communication protocol designed specifically for the project called OpenMicroBlogging (OMB). With version 0.8.1, the name of the software was changed to StatusNet. Version 0.9.0 was released soon after in March 3, 2010, with the developers implementing a newly designed protocol dubbed OStatus, with support for OMB being dropped not long after. Compared to OpenMicroBlogging, OStatus could handle and federate more events and actions than the basic plaintext communication that OMB provided and was based on a variety of other web technologies, allowing for easier adoption of new implementations of the protocol for servers and clients compared to the fully custom architecture of OMB. With the StatusNet name change, the company developing both the software and OStatus as well as managing identi.ca rebranded from Control Yourself to StatusNet Inc. In August 2010, the company raised a new round of venture capital funds to establish a hosting service under the status.net domain from sources such as First Mark Capital, BOLDstart Ventures, iNovia Capital and Montreal Start Up, raising over $2.3 million in funding up to that point. The hosting service allowed anyone to establish their own StatusNet instance without maintaining a server, similar to WordPress.com and other blogging platforms. New registrations on identi.ca along with the ability to create new status.net instances was disabled in December 2012, in preparation for a migration to pump.io that has since been named by users of StatusNet and OStatus as "the Pumpocalypse". pump.io was a brand new software package like StatusNet, but with a new protocol designed for general purpose activity streams outside of microblogging and ease-of-use for developers building on the technology, much like the transition from OMB to OStatus. The announcement was seen as unexpected among identi.ca users, who were concerned about the possibility of their statuses being deleted with the transition. At the same time, server administrators running third-party instances and their users who were left behind on StatusNet were also worried, as it was unclear at the time whether future development of the software would be picked up by a new maintainer. The transition for identi.ca users to pump.io was completed on 12 July 2013. ==== Previous names ==== The original name of StatusNet was Laconica, a reference to the Laconic phrase; a particularly brief statement commonly attributed to the leaders of Sparta (Laconia being the Greek region containing Sparta). In microblogging, all messages are designed to be very short due to the traditional 140-character limit on message size, a limitation imported from SMS. Beginning with version 0.8.1, the name was changed to StatusNet. The developers said that the new name "simply reflects what our software does: send status updates into your social network." === GNU social === GNU social originally began as a side project of GNU FM (Libre.fm) maintainer Matt Lee, with the goal of being able to federate messages between Last.fm and other instances of GNU FM using StatusNet plugins. Around the same time, a developer named Mikael Nordfeldth forked StatusNet with the intention of maintaining it as a personal project, dubbing it "Free Social". However, following identi.ca's transition to pump.io and its developers' sudden abandonment of StatusNet, the projects received more attention from server administrators and other users looking for an actively updated alternative. Shortly after LibrePlanet 2012, a plan was formed to merge all three projects into a single service. On June 8, 2013, it was announced that along with Free Social, StatusNet would be merged into the GNU social project and stewarded by the Free Software Foundation, with the project since becoming the dominant variant of StatusNet. During GNU social's lifespan, a popular theme for the user interface named Quitter was used, which was similar to an earlier Twitter interface. Many instances were made specifically using the name Quitter such as Quitter.se, an instance created by the developer of the theme. Before the establishment of Mastodon's popularity and dominance within the network, Quitter was noted as a frequent location for users of Twitter to migrate to when users disagreed with moderation policies or feature updates, such as when an algorithmic feed was added to Twitter. A fork of GNU social was made called postActiv, which planned to rewrite the backend and user interface of GNU social, as well as to add compatibility for Diaspora's protocol. == Features == A basic GNU social instance takes the form of a microblogging service with a reverse chronological timeline that features status updates and small messages from followed accounts, similar to other services such as Twitter or Weibo. While users could see their own customized timeline, they could access another timeline that showcased every message that the instance knows of, including from other instances that were connected to each other if someone on the instance followed an account from it. Users could also create and join groups, which allows for discussion and collaboration on specific topics. Administrators can also customize their server via the plugin system, which allows developers to create new features or modify existing plugins to suit the needs of the instance via PHP. A notable plugin built for GNU social was Quitter, a revamp of the user interface that resembles an earlier version of Twitter's user interface.

  Read more →
• 

  Drush

  Drush (DRUpal SHell) is a computer software shell-based application used to control, manipulate, and administer Drupal websites. == Details == Drush was originally developed by Arto Bendiken for Drupal 4.7. In May 2007, it was partly rewritten and redesigned for Drupal 5 by Franz Heinzmann. Drush is maintained by Moshe Weitzman with the support of Owen Barton, greg.1.anderson, jonhattan, Mark Sonnabaum, Jonathan Hedstrom and Christopher Gervais.

  Read more →
• 

  Web application firewall

  A Web application firewall (WAF) is a specific form of application firewall that filters, monitors, and blocks HTTP traffic to and from a web service. By inspecting HTTP traffic, it can prevent attacks exploiting a Web application's known vulnerabilities, such as SQL injection, cross-site scripting (XSS), file inclusion, and improper system configuration. Financial institutions often utilize WAFs to help in the mitigation of Web application zero-day vulnerabilities, as well as hard-to-patch bugs or weaknesses through custom attack signature strings. == History == Dedicated Web application firewalls entered the market in the late 1990s during a time when web server attacks were becoming more prevalent. Early WAF products, from Kavado and Gilian technologies, tried to solve the increasing amount of attacks on Web applications in the late 1990s. In 2002, the open-source project ModSecurity was formed in order to make WAF technology more accessible. They finalized a core rule set for protecting Web applications, based on OASIS Web Application Security Technical Committee’s (WAS TC) vulnerability work. In 2003, they expanded and standardized rules through the Open Web Application Security Project’s (OWASP) Top 10 List, an annual ranking for Web security vulnerabilities. This list would become the industry standard for Web application security compliance. Since then, the market has continued to grow and evolve, especially focusing on credit card fraud prevention. With the development of the Payment Card Industry Data Security Standard (PCI DSS), a standardization of control over cardholder data, security has become more regulated in this sector. == Description == A Web application firewall is a special type of application firewall that applies specifically to Web applications. It is deployed in front of Web applications and analyzes bi-directional web-based (HTTP) traffic – detecting and blocking anything malicious. The OWASP provides a broad technical definition for a WAF as “a security solution on the Web application level which – from a technical point of view – does not depend on the application itself”. According to the PCI DSS Information Supplement for requirement 6.6, a WAF is defined as “a security policy enforcement point positioned between a Web application and the client endpoint. This functionality can be implemented in software or hardware, running in an appliance device, or in a typical server running a common operating system. It may be a stand-alone device or integrated into other network components.” In other words, a WAF can be a virtual or physical appliance that prevents vulnerabilities in Web applications from being exploited by outside threats. These vulnerabilities may be because the application itself is a legacy type or was insufficiently coded by design. The WAF addresses these code shortcomings by special configurations of rule-sets, also known as policies. Previously unknown vulnerabilities can be discovered through penetration testing or via a vulnerability scanner. A Web application vulnerability scanner, also known as a web application security scanner, is defined in the SAMATE NIST 500-269 as “an automated program that examines Web applications for potential security vulnerabilities. In addition to searching for Web application-specific vulnerabilities, the tools also look for software coding errors.” Resolving vulnerabilities is commonly referred to as remediation. Corrections to the code can be made in the application, but typically a more prompt response is necessary. In these situations, the application of a custom policy for a unique Web application vulnerability to provide a temporary but immediate fix (known as a virtual patch) may be necessary. WAFs are not an ultimate security solution, rather they are meant to be used in conjunction with other network perimeter security solutions such as network firewalls and intrusion prevention systems to provide a holistic defense strategy. WAFs typically follow a positive security model, a negative security, or a combination of both as mentioned by the SANS Institute. WAFs use a combination of rule-based logic, parsing, and signatures to detect and prevent attacks such as cross-site scripting and SQL injection. In general, features like browser emulation, obfuscation and virtualization, and IP obfuscation are used to attempt to bypass WAFs. The OWASP produces a list of the top ten Web application security flaws. All commercial WAF offerings cover these ten flaws at a minimum. There are non-commercial options as well. As mentioned earlier, the well-known open-source WAF engine called ModSecurity is one of these options. A WAF engine alone is insufficient to provide adequate protection, therefore OWASP along with Trustwave's Spiderlabs help organize and maintain a Core-Rule Set via GitHub to use with the ModSecurity WAF engine. == Deployment options == Although the names for operating mode may differ, WAFs are basically deployed inline in three different ways. According to NSS Labs, deployment options are transparent bridge, transparent reverse proxy, and reverse proxy. "Transparent" refers to the fact that the HTTP traffic is sent straight to the Web application, therefore the WAF is transparent between the client and server. This is in contrast to reverse proxy, where the WAF acts as a proxy, and the client’s traffic is sent directly to the WAF. The WAF then separately sends filtered traffic to Web applications. This can provide additional benefits such as IP masking but may introduce disadvantages such as performance latencies. == JA3 fingerprint == JA3, developed by Salesforce in 2017, is a technique for generating a unique fingerprint for SSL/TLS traffic based on specific fields in the handshake, such as the version, cipher suites, and extensions used by the client. This fingerprint enables the identification and tracking of clients based on the characteristics of their encrypted traffic. In the context of distributed denial of service (DDoS) protection, JA3 fingerprints are used to detect and differentiate malicious traffic, often associated with attack bots, from legitimate traffic, allowing for more precise filtering of potential threats. In September 2023, AWS WAF announced built-in support for JA3, enabling customers to inspect the JA3 fingerprints of incoming requests. JA3 was deprecated in May 2025 in favor of JA4. JA4 is currently patent pending.

  Read more →
• 

  Transfer learning

  Transfer learning (TL) is a technique in machine learning (ML) in which knowledge learned from a task is re-used in order to boost performance on a related task. For example, for image classification, knowledge gained while learning to recognize cars could be applied when trying to recognize trucks. This topic is related to the psychological literature on transfer of learning, although practical ties between the two fields are limited. Reusing or transferring information from previously learned tasks to new tasks has the potential to significantly improve learning efficiency. Since transfer learning makes use of training with multiple objective functions it is related to cost-sensitive machine learning and multi-objective optimization. == History == In 1976, Bozinovski and Fulgosi published a paper addressing transfer learning in neural network training. The paper gives a mathematical and geometrical model of the topic. In 1981, a report considered the application of transfer learning to a dataset of images representing letters of computer terminals, experimentally demonstrating positive and negative transfer learning. In 1992, Lorien Pratt formulated the discriminability-based transfer (DBT) algorithm. By 1998, the field had advanced to include multi-task learning, along with more formal theoretical foundations. Influential publications on transfer learning include the book Learning to Learn in 1998, a 2009 survey and a 2019 survey. Ng said in his NIPS 2016 tutorial that TL would become the next driver of machine learning commercial success after supervised learning. In the 2020 paper, "Rethinking Pre-Training and self-training", Zoph et al. reported that pre-training can hurt accuracy, and advocate self-training instead. == Definition == The definition of transfer learning is given in terms of domains and tasks. A domain D {\displaystyle {\mathcal {D}}} consists of: a feature space X {\displaystyle {\mathcal {X}}} and a marginal probability distribution P ( X ) {\displaystyle P(X)} , where X = { x 1 , . . . , x n } ∈ X {\displaystyle X=\{x_{1},...,x_{n}\}\in {\mathcal {X}}} . Given a specific domain, D = { X , P ( X ) } {\displaystyle {\mathcal {D}}=\{{\mathcal {X}},P(X)\}} , a task consists of two components: a label space Y {\displaystyle {\mathcal {Y}}} and an objective predictive function f : X → Y {\displaystyle f:{\mathcal {X}}\rightarrow {\mathcal {Y}}} . The function f {\displaystyle f} is used to predict the corresponding label f ( x ) {\displaystyle f(x)} of a new instance x {\displaystyle x} . This task, denoted by T = { Y , f ( x ) } {\displaystyle {\mathcal {T}}=\{{\mathcal {Y}},f(x)\}} , is learned from the training data consisting of pairs { x i , y i } {\displaystyle \{x_{i},y_{i}\}} , where x i ∈ X {\displaystyle x_{i}\in {\mathcal {X}}} and y i ∈ Y {\displaystyle y_{i}\in {\mathcal {Y}}} . Given a source domain D S {\displaystyle {\mathcal {D}}_{S}} and learning task T S {\displaystyle {\mathcal {T}}_{S}} , a target domain D T {\displaystyle {\mathcal {D}}_{T}} and learning task T T {\displaystyle {\mathcal {T}}_{T}} , where D S ≠ D T {\displaystyle {\mathcal {D}}_{S}\neq {\mathcal {D}}_{T}} , or T S ≠ T T {\displaystyle {\mathcal {T}}_{S}\neq {\mathcal {T}}_{T}} , transfer learning aims to help improve the learning of the target predictive function f T ( ⋅ ) {\displaystyle f_{T}(\cdot )} in D T {\displaystyle {\mathcal {D}}_{T}} using the knowledge in D S {\displaystyle {\mathcal {D}}_{S}} and T S {\displaystyle {\mathcal {T}}_{S}} . == Applications == Algorithms for transfer learning are available in Markov logic networks and Bayesian networks. Transfer learning has been applied to cancer subtype discovery, building utilization, general game playing, text classification, digit recognition, medical imaging and spam filtering. In 2020, it was discovered that, due to their similar physical natures, transfer learning is possible between electromyographic (EMG) signals from the muscles and classifying the behaviors of electroencephalographic (EEG) brainwaves, from the gesture recognition domain to the mental state recognition domain. It was noted that this relationship worked in both directions, showing that electroencephalographic can likewise be used to classify EMG. The experiments noted that the accuracy of neural networks and convolutional neural networks were improved through transfer learning both prior to any learning (compared to standard random weight distribution) and at the end of the learning process (asymptote). That is, results are improved by exposure to another domain. Moreover, the end-user of a pre-trained model can change the structure of fully-connected layers to improve performance.

  Read more →
• 

  ISPConfig

  ISPConfig is an open source hosting control panel for Linux, licensed under BSD license and developed by the company ISPConfig UG. The ISPConfig project was started in autumn 2005 by Till Brehm from the German company projektfarm GmbH. == Overview == Using the dashboard, administrators have the ability to manage websites, email addresses, MySQL and MariaDB as well as PostgreSQL (since version 3.3) databases, FTP accounts, Shell accounts and DNS records through a web-based interface. The software has 4 login levels: administrator, reseller, client, and email-user, each with a different set of permissions. == Operating Systems == ISPConfig is only available on Linux, with CentOS, Debian, and Ubuntu being among the supported distributions. == Features == The following services and features are supported: Management of a single or multiple servers from one control panel. Web server management for Apache HTTP Server and Nginx. Mail server management (with virtual mail users) with spam and antivirus filter using Postfix (software) and Dovecot (software). DNS server management (BIND, Powerdns). Configuration mirroring and clusters. Administrator, reseller, client and mail-user login. Virtual server management for OpenVZ Servers. Website statistics using Webalizer and AWStats

  Read more →
• 

  Color layout descriptor

  In digital image and video processing, a color layout descriptor (CLD) is designed to capture the spatial distribution of color in an image. The feature extraction process consists of two parts: grid based representative color selection and discrete cosine transform with quantization. Color is the most basic quality of the visual contents, therefore it is possible to use colors to describe and represent an image. The MPEG-7 standard has tested the most efficient procedure to describe the color and has selected those that have provided more satisfactory results. This standard proposes different methods to obtain these descriptors, and one tool defined to describe the color is the CLD, that permits describing the color relation between sequences or group of images. The CLD captures the spatial layout of the representative colors on a grid superimposed on a region or image. Representation is based on coefficients of the discrete cosine transform (DCT). This is a very compact descriptor being highly efficient in fast browsing and search applications. It can be applied to still images as well as to video segments. == Definition == The CLD is a very compact and resolution-invariant representation of color for high-speed image retrieval and it has been designed to efficiently represent the spatial distribution of colors. This feature can be used for a wide variety of similarity-based retrieval, content filtering and visualization. It is especially useful for spatial structure-based retrieval applications. This descriptor is obtained by applying the DCT transformation on a 2-D array of local representative colors in Y or Cb or Cr color space. The functionalities of the CLD are basically the matching: – Image-to-image matching – Video clip-to-video clip matching Remark that the CLD is one of the most precise and fast color descriptor. == Extraction == The extraction process of this color descriptor consists of four stages: Image partitioning Representative color selection DCT transformation Zigzag scanning The standard MPEG-7 recommends using the YCbCr color space for the CLD. === Image partitioning === In the image partitioning stage, the input picture (on RGB color space) is divided into 64 blocks to guarantee the invariance to resolution or scale. The inputs and outputs of this step are summarized in the following table: === Representative color selection === After the image partitioning stage, a single representative color is selected from each block. Any method to select the representative color can be applied, but the standard recommends the use of the average of the pixel colors in a block as the corresponding representative color, since it is simpler and the description accuracy is sufficient in general. The selection results in a tiny image icon of size 8x8. The next figure shows this process. Note that in the image of the figure, the resolution of the original image has been maintained only in order to facilitate its representation. The inputs and outputs of this stage are summarized in the next table: Once the tiny image icon is obtained, the color space conversion between RGB and YCbCr is applied. === DCT transformation === In the fourth stage, the luminance (Y) and the blue and red chrominance (Cb and Cr) are transformed by 8x8 DCT, so three sets of 64 DCT coefficients are obtained. To calculate the DCT in a 2D array, the formulas below are used. B p q = α p α q ∑ m = 0 M − 1 ∑ n = 0 N − 1 A m n cos ⁡ π ( 2 m + 1 ) p 2 M cos ⁡ π ( 2 n + 1 ) q 2 N , 0 ≤ p ≤ M − 1 , 0 ≤ q ≤ N − 1 {\displaystyle B_{pq}=\alpha _{p}\alpha _{q}\sum _{m=0}^{M-1}\sum _{n=0}^{N-1}A_{mn}\cos {\frac {\pi (2m+1)p}{2M}}\cos {\frac {\pi (2n+1)q}{2N}},\qquad 0\leq p\leq M-1,\;0\leq q\leq N-1} α p = { 1 M , p = 0 2 M , 1 ≤ p ≤ M − 1 α q = { 1 N , q = 0 2 N , 1 ≤ q ≤ N − 1 {\displaystyle \alpha _{p}={\begin{cases}{\frac {1}{\sqrt {M}}},&p=0\\{\sqrt {\frac {2}{M}}},&1\leq p\leq M-1\end{cases}}\qquad \alpha _{q}={\begin{cases}{\frac {1}{\sqrt {N}}},&q=0\\{\sqrt {\frac {2}{N}}},&1\leq q\leq N-1\end{cases}}} The inputs and outputs of this stage are summarized in the next table: === Zigzag scanning === A zigzag scanning is performed with these three sets of 64 DCT coefficients, following the schema presented in the figure. The purpose of the zigzag scan is to group the low frequency coefficients of the 8x8 matrix into a vector. The inputs and outputs of this stage are summarized in the next table: Finally, these three set of matrices correspond to the CLD of the input image. == Matching == The matching process helps to evaluate if two elements are equal comparing both elements and calculating the distance between them. In the case of color descriptors the matching process helps to evaluate if two images are similar. Its procedure is the following: – Given an image as an input, the application attempts to find an image with a similar descriptor in a data base of images. If we consider two CLDs: {DY, DCb, DCr} { DY‟, DCb‟, DCr‟ }, The distance between the two descriptors can be computed as: D = ∑ i w y i ( D Y i − D Y i ′ ) 2 + ∑ i w b i ( D C b i − D C b i ′ ) 2 + ∑ i w r i ( D C r i − D C r i ′ ) 2 {\displaystyle D={\sqrt {\sum _{i}w_{yi}(DY_{i}-DY_{i}')^{2}}}+{\sqrt {\sum _{i}w_{bi}(DCb_{i}-DCb_{i}')^{2}}}+{\sqrt {\sum _{i}w_{ri}(DCr_{i}-DCr_{i}')^{2}}}} The subscript i represents the zigzag-scanning order of the coefficients. Furthermore, notice that is possible to weight the coefficients (w) in order to adjust the performance of the matching process. These weights let us give to some components of the descriptor more importance than others. Observing the formula, it can be extracted that: – 2 images are the same if the distance is 0 – 2 images are similar if the distance is near to 0 Therefore, this matching process will let to identify images with similar color descriptors. Since the complexity of the similarity matching process shown above is low, high-speed image matching can be achieved.

  Read more →
• 

  Cloud manufacturing

  Cloud manufacturing (CMfg) is a new manufacturing paradigm developed from existing advanced manufacturing models (e.g., ASP, AM, NM, MGrid) and enterprise information technologies under the support of cloud computing, Internet of Things (IoT), virtualization and service-oriented technologies, and advanced computing technologies. It transforms manufacturing resources and manufacturing capabilities into manufacturing services, which can be managed and operated in an intelligent and unified way to enable the full sharing and circulating of manufacturing resources and manufacturing capabilities. CMfg can provide safe and reliable, high quality, cheap and on-demand manufacturing services for the whole lifecycle of manufacturing. The concept of manufacturing here refers to big manufacturing that includes the whole lifecycle of a product (e.g. design, simulation, production, test, maintenance). The concept of Cloud manufacturing was initially proposed by the research group led by Prof. Bo Hu Li and Prof. Lin Zhang in China in 2010. Related discussions and research were conducted hereafter, and some similar definitions (e.g. Cloud-Based Design and Manufacturing (CBDM). ) to cloud manufacturing were introduced. Cloud manufacturing is a type of parallel, networked, and distributed system consisting of an integrated and inter-connected virtualized service pool (manufacturing cloud) of manufacturing resources and capabilities as well as capabilities of intelligent management and on-demand use of services to provide solutions for all kinds of users involved in the whole lifecycle of manufacturing. == Types == Cloud Manufacturing can be divided into two categories. The first category concerns deploying manufacturing software on the Cloud, i.e. a “manufacturing version” of Computing. CAx software can be supplied as a service on the Manufacturing Cloud (MCloud). The second category has a broader scope, cutting across production, management, design and engineering abilities in a manufacturing business. Unlike with computing and data storage, manufacturing involves physical equipment, monitors, materials and so on. In this kind of Cloud Manufacturing system, both material and non-material facilities are implemented on the Manufacturing Cloud to support the whole supply chain. Costly resources are shared on the network. This means that the utilisation rate of rarely used equipment rises and the cost of expensive equipment is reduced. According to the concept of Cloud technology, there will not be direct interaction between Cloud Users and Service Providers. The Cloud User should neither manage nor control the infrastructure and manufacturing applications. As a matter of fact, the former can be considered part of the latter. In CMfg system, various manufacturing resources and abilities can be intelligently sensed and connected into wider Internet, and automatically managed and controlled using IoT technologies (e.g., RFID, wired and wireless sensor network, embedded system). Then the manufacturing resources and abilities are virtualized and encapsulated into different manufacturing cloud services (MCSs), that can be accessed, invoked, and deployed based on knowledge by using virtualization technologies, service-oriented technologies, and cloud computing technologies. The MCSs are classified and aggregated according to specific rules and algorithms, and different kinds of manufacturing clouds are constructed. Different users can search and invoke the qualified MCSs from related manufacturing cloud according to their needs, and assemble them to be a virtual manufacturing environment or solution to complete their manufacturing task involved in the whole life cycle of manufacturing processes under the support of cloud computing, service-oriented technologies, and advanced computing technologies. Four types of cloud deployment modes (public, private, community and hybrid clouds) are ubiquitous as a single point of access. Private cloud refers to a centralized management effort in which manufacturing services are shared within one company or its subsidiaries. Enterprises' mission-critical and core-business applications are often kept in a private cloud. Community cloud is a collaborative effort in which manufacturing services are shared between several organizations from a specific community with common concerns. Public cloud realizes the key concept of sharing services with the general public in a multi-tenant environment. Hybrid cloud is a composition of two or more clouds (private, community or public) that remain distinct entities but are also bound together, offering the benefits of multiple deployment modes. == Resources == From the resource’s perspective, each kind of manufacturing capability requires support from the related manufacturing resource. For each type of manufacturing capability, its related manufacturing resource comes in two forms, soft resources and hard resources. === Soft resources === Software: software applications throughout the product lifecycle including design, analysis, simulation, process planning, and are only beginning to be embraced by the electronics manufacturing industry. Knowledge: experience and know-how needed to complete a production task, i.e. engineering knowledge, product models, standards, evaluation procedures and results, customer feedback, and manufacturing in the cloud provides just as many solutions as the number of questions it also raises for manufacturing executives wanting to make the best possible decision. Skill: expertise in performing a specific manufacturing task. Personnel: human resource engaged in the manufacturing process, i.e. designers, operators, managers, technicians, project teams, customer service, etc. Experience: performance, quality, client evaluation, etc. Business Network: business relationships and business opportunity networks that exist in an enterprise. === Hard resources === Manufacturing Equipment: facilities needed for completing a manufacturing task, e.g. machine tools, cutters, test and monitoring equipment and other fabrication tools. Monitoring/Control Resource: devices used to identify and control other manufacturing resource, for instance, RFID (Radio-Frequency IDentification), WSN (Wireless Sensor Network), virtual managers and remote controllers. Computational Resource: computing devices to support production process, e.g. servers, computers, storage media, control devices, etc. Materials: inputs and outputs in a production system, e.g. raw material, product-in-progress, finished product, power, water, lubricants, etc. Storage: automated storage and retrieval systems, logic controllers, location of warehouses, volume capacity and schedule/optimization methods. Transportation: movement of manufacturing inputs/outputs from one location to another. It includes the modes of transport, e.g. air, rail, road, water, cable, pipeline and space, and the related price, and time taken.

  Read more →
• 

  Candid (app)

  Candid was a mobile app for anonymous discussions. It used machine learning to create personalized newsfeeds of opinions and real conversations, and also for moderation and filtering. Users posted under pseudonyms such as "HyperMantis", "SincereGiraffe", "GroundedTurtle" and "ExuberantRaptor", that are unique for each thread. Founder and CEO Bindu Reddy said that she needed "a place to express myself and engage in discussions where ideas can be debated on their own merits instead of being used to attack me as a person", which Candid tried to solve by redirecting off-topic comments to their appropriate groups, removing spam and flagging negative posts. They used natural language processing to identify hate speech, slander and threats, and removed them accordingly with human intervention. Candid software analyzed topics and tried to flag rumors and lies as such. Users could flag problematic posts and a team of ten contractors would review them individually. With time the system analyzed a user's interactions and give them labels, such as socializer, explorer, positive, influencer, hater, gossip, etc. In June 2017, Candid announced that it would be shut down because its parent company, Post Intelligence, was being acquired. The app was forecast to close on June 23, 2017, but didn't actually close until June 25, 2017.

  Read more →
• 

  PlantUML

  PlantUML is an open-source tool allowing users to create diagrams from a plain text language. Besides various UML diagrams, PlantUML has support for various other software development related formats (such as Archimate, Block diagram, BPMN, C4, Computer network diagram, ERD, Gantt chart, Mind map, and WBD), as well as visualisation of JSON and YAML files. The language of PlantUML is an example of a domain-specific language. Besides its own DSL, PlantUML also understands AsciiMath, Creole, DOT, and LaTeX. It uses Graphviz software to lay out its diagrams and Tikz for LaTeX support. Images can be output as PNG, SVG, LaTeX and even ASCII art. PlantUML has also been used to allow blind people to design and read UML diagrams. == Applications that use PlantUML == There are various extensions or add-ons that incorporate PlantUML. Atom has a community maintained PlantUML syntax highlighter and viewer. Confluence wiki has a PlantUML plug-in for Confluence Server, which renders diagrams on-the-fly during a page reload. There is an additional PlantUML plug-in for Confluence Cloud. Doxygen integrates diagrams for which sources are provided after the startuml command. Eclipse has a PlantUML plug-in. Google Docs has an add-on called PlantUML Gizmo that works with the PlantUML.com server. IntelliJ IDEA can create and display diagrams embedded into Markdown (built-in) or in standalone files (using a plugin). LaTeX using the Tikz package has limited support for PlantUML. LibreOffice has Libo_PlantUML extension to use PlantUML diagrams. MediaWiki has a PlantUML plug-in which renders diagrams in pages as SVG or PNG. Microsoft Word can use PlantUML diagrams via a Word Template Add-in. There is an additional Visual Studio Tools for Office add-in called PlantUML Gizmo that works in a similar fashion. NetBeans has a PlantUML plug-in. Notepad++ has a PlantUML plug-in. Obsidian has a PlantUML plug-in. Org-mode has a PlantUML org-babel support. Rider has a PlantUML plug-in. Sublime Text has a PlantUML package called PlantUmlDiagrams for Sublime Text 2 and 3. Visual Studio Code has various PlantUML extensions on its marketplace, most popular being PlantUML by jebbs. Vnote open source notetaking markdown application has built in PlantUML support. Xcode has a community maintained Source Editor Extension to generate and view PlantUML class diagrams from Swift source code. == Text format to communicate UML at source code level == PlantUML uses well-formed and human-readable code to render the diagrams. There are other text formats for UML modelling, but PlantUML supports many diagram types, and does not need an explicit layout, though it is possible to tweak the diagrams if necessary. +--------------------------------------+ | TEDx Talks Recommendation | | System | +--------------------------------------+ | +----------------------------------+ | | | Visitor | | | +----------------------------------+ | | | + View Recommended Talks | | | | + Search Talks | | | +----------------------------------+ | +--------------------------------------+ | | V +--------------------------------------+ | Authenticated User | +--------------------------------------+ | +----------------------------------+ | | | User | | | +----------------------------------+ | | | + View Recommended Talks | | | | + Search Talks | | | | + Save Favorite Talks | | | +----------------------------------+ | +--------------------------------------+ | | V +--------------------------------------+ | Admin | +--------------------------------------+ | +----------------------------------+ | | | Admin | | | +----------------------------------+ | | | + CRUD Talks | | | | + Manage Users | | | +----------------------------------+ | +--------------------------------------+

  Read more →
• 

  Drush

  Drush (DRUpal SHell) is a computer software shell-based application used to control, manipulate, and administer Drupal websites. == Details == Drush was originally developed by Arto Bendiken for Drupal 4.7. In May 2007, it was partly rewritten and redesigned for Drupal 5 by Franz Heinzmann. Drush is maintained by Moshe Weitzman with the support of Owen Barton, greg.1.anderson, jonhattan, Mark Sonnabaum, Jonathan Hedstrom and Christopher Gervais.

  Read more →
• 

  Circular thresholding

  Circular thresholding is an algorithm for automatic image threshold selection in image processing. Most threshold selection algorithms assume that the values (e.g. intensities) lie on a linear scale. However, some quantities such as hue and orientation are a circular quantity, and therefore require circular thresholding algorithms. The example shows that the standard linear version of Otsu's method when applied to the hue channel of an image of blood cells fails to correctly segment the large white blood cells (leukocytes). In contrast the white blood cells are correctly segmented by the circular version of Otsu's method. == Methods == There are a relatively small number of circular image threshold selection algorithms. The following examples are all based on Otsu's method for linear histograms: (Tseng, Li and Tung 1995) smooth the circular histogram, and apply Otsu's method. The histogram is cyclically rotated so that the selected threshold is shifted to zero. Otsu's method and histogram rotation are applied iteratively until several heuristics involving class size, threshold location, and class variance are satisfied. (Wu et al. 2006) smooth the circular histogram until it contains only two peaks. The histogram is cyclically rotated so that the midpoint between the peaks is shifted to zero. Otsu's method and histogram rotation are applied iteratively until convergence of the threshold. (Lai and Rosin 2014) applied Otsu's method to the circular histogram. For the two class circular thresholding task they showed that, for a histogram with an even number of bins, the optimal solution for Otsu's criterion of within-class variance is obtained when the histogram is split into two halves. Therefore the optimal solution can be efficiently obtained in linear rather than quadratic time. == References and further reading == D.-C. Tseng, Y.-F. Li, and C.-T. Tung, Circular histogram thresholding for color image segmentation in Proc. Int. Conf. Document Anal. Recognit., 1995, pp. 673–676. J. Wu, P. Zeng, Y. Zhou, and C. Olivier, A novel color image segmentation method and its application to white blood cell image analysis in Proc. Int. Conf. Signal Process., vol. 2. 2006, pp. 16–20. Y.K. Lai, P.L. Rosin, Efficient Circular Thresholding, IEEE Trans. on Image Processing 23(3), 992–1001 (2014). doi:10.1109/TIP.2013.2297014

  Read more →
• 

  WriterDuet

  WriterDuet is a screenwriting software for writing and editing screenplays and other forms of mass media. == History == WriterDuet was founded in 2013 by Guy Goldstein. In April 2015, WriterDuet acquired the domain for Scripped.com after they closed, citing a serious technical failure. In August 2016, WriterDuet released a localized version of its software in China. In May 2018, WriterDuet included Bechdel test analysis functions to address issues of gender diversity in the screenwriting industry. In 2018, WriterDuet published WriterSolo, an offline version of their app that runs on the browser and opens/saves files on the computer, Dropbox, Google Drive, and iCloud. In July 2019, WriterDuet made the WriterSolo browser app and desktop app available as pay-what-you-want under the web address FreeScreenwriting.com. == Features == WriterDuet is primarily used to outline, write, and format screenplays to the standards recommended by the AMPAS. It also supports formats for theater, novels, and video games. The software is powered by Firebase allowing users to write together in real-time from multiple devices. WriterDuet's main competitors in the screenwriting industry are Final Draft, Celtx, and Movie Magic Screenwriter.

  Read more →
• 

  ObjectVision

  ObjectVision was a forms-based programming language and environment for Windows 3.x developed by Borland. The latest version, 2.1, was released in 1992. An ObjectVision application is composed by forms designed in a graphic way that contains objects and events to provide interactivity. Forms are connected together with logic in the form of decision trees. ObjectVision applications also can interact with databases using multiple engines, like Paradox and dBase. A finished project is saved as an OVD file, that is executed by an interpreted runtime that can be freely distributed. ObjectVision was not used broadly except in some niche segments, but the visual programming ideas were the basis for Borland Delphi.

  Read more →
• 

  Amazon Kinesis

  Amazon Kinesis is a family of services provided by Amazon Web Services (AWS) for processing and analyzing real-time streaming data at a large scale. Launched in November 2013, it offers developers the ability to build applications that can consume and process data from multiple sources simultaneously. Kinesis supports multiple use cases, including real-time analytics, log and event data collection, and real-time processing of data generated by IoT devices. == History == Amazon Kinesis was launched by Amazon Web Services (AWS) in November 2013 as a managed service for processing and analyzing real-time streaming data at a large scale. The service was introduced to address the growing need for businesses to process and analyze data as it was generated, rather than in batches, allowing for real-time insights and decision-making. Since its launch, the Amazon Kinesis family of services has expanded to include four main components: Kinesis Data Streams, Kinesis Data Firehose, Kinesis Data Analytics, and Kinesis Video Streams. Each of these components serves a specific purpose in the processing and analysis of real-time streaming data. In August 2015, AWS announced the availability of Kinesis Data Firehose, a fully managed service for delivering real-time streaming data to destinations such as Amazon S3, Amazon Redshift, and Amazon Elasticsearch. A year later in August 2016, AWS launched Kinesis Data Analytics, enabling customers to analyze streaming data in real time using standard SQL queries. AWS introduced Kinesis Video Streams, a fully managed service for securely capturing, processing, and storing video streams for analytics and machine learning applications, was introduced by AWS in November 2017. == Components == Amazon Kinesis is composed of four main services: Kinesis Data Streams, Kinesis Data Firehose, Kinesis Data Analytics, and Kinesis Video Streams. === Kinesis Data Streams === Kinesis Data Streams is a scalable and durable real-time data streaming service that captures and processes gigabytes of data per second from multiple sources. It enables the storage and processing of data in real time, making it useful for applications that require immediate insights, such as monitoring and alerting. === Kinesis Data Firehose === Kinesis Data Firehose is a fully managed service for delivering real-time streaming data to destinations such as Amazon S3, Amazon Redshift, Amazon Elasticsearch, and AWS-partner data stores. With Data Firehose, users can configure and scale data delivery without manual intervention. === Kinesis Data Analytics === Kinesis Data Analytics enables the analysis of streaming data in real time using standard SQL or Apache Flink. === Kinesis Video Streams === Kinesis Video Streams is a fully managed service for securely capturing, processing, and storing video streams for analytics and machine learning. It supports multiple video codecs and streaming protocols, making it suitable for various use cases, such as security and surveillance, video-enabled IoT devices, and live event broadcasting. == Integration == Amazon Kinesis can be easily integrated with other AWS services, such as AWS Lambda, Amazon S3, Amazon Redshift, and Amazon OpenSearch. This integration enables developers to build end-to-end streaming data processing applications, taking advantage of the extensive AWS ecosystem. == Use cases == Some common use cases for Amazon Kinesis include: Real-time analytics: Analyzing streaming data in real time to provide immediate insights and make data-driven decisions. Log and event data collection: Collecting, processing, and analyzing log and event data generated by applications, infrastructure, and devices. IoT data processing: Processing and analyzing large volumes of data generated by IoT devices in real time. Machine learning: Ingesting and processing video streams for machine learning applications, such as object recognition, facial recognition, and sentiment analysis. == Pricing == Amazon Kinesis follows a pay-as-you-go pricing model, with costs depending on the chosen service, data volume, and processing power required. AWS provides a free tier for Kinesis Data Streams and Kinesis Data Firehose, allowing users to get started with the services at no cost.

  Read more →