AI Google Grammar Checker

AI Google Grammar Checker — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

  • Chatbot

    Chatbot

    A chatbot (originally chatterbot) is a software application or web interface designed to converse through text or speech. Modern chatbots are typically online and use generative artificial intelligence systems that are capable of maintaining a conversation with a user in natural language and simulating the way a human would behave as a conversational partner. Such chatbots often use deep learning and natural language processing. Simpler chatbots have existed for decades. Chatbots have gained popularity during the AI boom of the 2020s, with the releases of generative AI chatbots such as ChatGPT, Gemini, Claude, and Grok. These chatbots typically use fine-tuned large language models to generate text. A major area where chatbots have long been used is customer service and support, with various sorts of virtual assistants. == History == === Turing test === In 1950, Alan Turing published an article entitled "Computing Machinery and Intelligence" in which he proposed what is now called the Turing test as a criterion of intelligence. This criterion depends on the ability of a computer program to impersonate a human in a real-time written conversation with a human judge, to the extent that the judge is incapable of reliably distinguishing, on the basis of the conversational content alone, between the program and a real human. === Early chatbots === Joseph Weizenbaum's program ELIZA was first published in 1966. Weizenbaum did not claim that ELIZA was genuinely intelligent, and the introduction to his paper presented it more as a debunking exercise:In artificial intelligence, machines are made to behave in wondrous ways, often sufficient to dazzle even the most experienced observer. But once a particular program is unmasked, once its inner workings are explained, its magic crumbles away; it stands revealed as a mere collection of procedures. The observer says to himself "I could have written that". With that thought, he moves the program in question from the shelf marked "intelligent", to that reserved for curios. The object of this paper is to cause just such a re-evaluation of the program about to be "explained". Few programs ever needed it more. ELIZA's key method of operation involves the recognition of clue words or phrases in the input, and the output of the corresponding pre-prepared or pre-programmed responses that can move the conversation forward in an apparently meaningful way (e.g. by responding to any input that contains the word 'MOTHER' with 'TELL ME MORE ABOUT YOUR FAMILY'). Thus an illusion of understanding is generated, even though the processing involved has been merely superficial. ELIZA showed that such an illusion is surprisingly easy to generate because human judges are ready to give the benefit of the doubt when conversational responses are capable of being interpreted as "intelligent". Following ELIZA, psychiatrist Kenneth Colby developed PARRY in 1972. From 1978 to some time after 1983, the CYRUS project led by Janet Kolodner constructed a chatbot simulating Cyrus Vance (57th United States Secretary of State). It used case-based reasoning, and updated its database daily by parsing wire news from United Press International. The program was unable to process the news items subsequent to the surprise resignation of Cyrus Vance in April 1980, and the team constructed another chatbot simulating his successor, Edmund Muskie. In 1984, an interactive version of the program Racter was released which acted as a chatbot. A.L.I.C.E. was released in 1995. This uses a markup language called AIML, which is specific to its function as a conversational agent, and has since been adopted by various other developers of, so-called, Alicebots. A.L.I.C.E. is a weak AI without any reasoning capabilities. It is based on a similar pattern matching technique as ELIZA in 1966. This is not strong AI, which would require sapience and logical reasoning abilities. Jabberwacky, released in 1997, learns new responses and context based on real-time user interactions, rather than being driven from a static database. Chatbot competitions focus on the Turing test or more specific goals. Two such annual contests are the Loebner Prize and The Chatterbox Challenge (the latter has been offline since 2015, however, materials can still be found from web archives). Pre-dating the current generation of large language models, Gavagai, a Swedish language technology startup, created a Twitter-based bot in 2015 and DBpedia created a chatbot during the 2017 Google Summer of Code that communicated through Facebook Messenger. === Modern chatbots based on large language models === Modern chatbots like ChatGPT are often based on foundational large language models called generative pre-trained transformers (GPT). They are based on a deep learning architecture called the transformer, which contains artificial neural networks. They generate text after being trained on a large text corpus, and have emergent abilities that they are not specifically trained for. Chatbots integrated into apps and websites can call image-generation models or search the web. Some platforms also enable users to interact with conversational interfaces directly through web-based chat environments, allowing real-time assistance, content generation, and task automation without requiring software installation. == Application == === Messaging apps === Many companies' chatbots run on messaging apps or simply via SMS. They are used for B2C customer service, sales and marketing. In 2016, Facebook Messenger allowed developers to place chatbots on their platform. There were 30,000 bots created for Messenger in the first six months, rising to 100,000 by September 2017. Since September 2017, this has also been as part of a pilot program on WhatsApp. Airlines KLM and Aeroméxico both announced their participation in the testing; both airlines had previously launched customer services on the Facebook Messenger platform. The bots usually appear as one of the user's contacts, but can sometimes act as participants in a group chat. Many banks, insurers, media companies, e-commerce companies, airlines, hotel chains, retailers, health care providers, government entities, and restaurant chains have used chatbots to answer simple questions, increase customer engagement, for promotion, and to offer additional ways to order from them. Chatbots are also used in market research to collect short survey responses. A 2017 study showed 4% of companies used chatbots. In a 2016 study, 80% of businesses said they intended to have one by 2020. ==== As part of company apps and websites ==== Previous generations of chatbots were present on company websites, e.g. Ask Jenn from Alaska Airlines which debuted in 2008 or Expedia's virtual customer service agent which launched in 2011. The newer generation of chatbots includes IBM Watson-powered "Rocky", introduced in February 2017 by the New York City-based e-commerce company Rare Carat to provide information to prospective diamond buyers. ==== Chatbot sequences ==== Used by marketers to script sequences of messages, very similar to an autoresponder sequence. Such sequences can be triggered by user opt-in or the use of keywords within user interactions. After a trigger occurs a sequence of messages is delivered until the next anticipated user response. Each user response is used in the decision tree to help the chatbot navigate the response sequences to deliver the correct response message. === Company internal platforms === Companies have used chatbots for customer support, human resources, or in Internet-of-Things (IoT) projects. Overstock.com, for one, has reportedly launched a chatbot named Mila to attempt to automate certain processes when customer service employees request sick leave. Other large companies such as Lloyds Banking Group, Royal Bank of Scotland, Renault and Citroën are now using chatbots instead of call centres with humans to provide a first point of contact. In large companies, like in hospitals and aviation organizations, chatbots are also used to share information within organizations, and to assist and replace service desks. === Customer service === Chatbots have been proposed as a replacement for customer service departments. In 2026, The Financial Times reported on agentic chatbots that could do shopping for customers once given instructions. In 2016, Russia-based Tochka Bank launched a chatbot on Facebook for a range of financial services, including a possibility of making payments. In July 2016, Barclays Africa also launched a Facebook chatbot. === Healthcare === Chatbots are also appearing in the healthcare industry. A study suggested that physicians in the United States believed that chatbots would be most beneficial for scheduling doctor appointments, locating health clinics, or providing medication information. A 2025 review found that participants often rated chatbot responses as more empathic than those from clinicians. In 2020, WhatsApp worked with th

    Read more →
  • List of operating systems

    List of operating systems

    This is a list of operating systems. Computer operating systems can be categorized by technology, ownership, licensing, working state, usage, and by many other characteristics. In practice, many of these groupings may overlap. Criteria for inclusion is notability, as shown either through an existing Wikipedia article or citation to a reliable source. == Proprietary == === Acorn Computers === Arthur ARX MOS RISC iX RISC OS === Amazon === Fire OS === Amiga Inc. === AmigaOS AmigaOS 1.0-3.9 (Motorola 68000) AmigaOS 4 (PowerPC) Amiga Unix (a.k.a. Amix) === Amstrad === AMSDOS Contiki CP/M 2.2 CP/M Plus SymbOS === Apple === Apple II Apple DOS Apple Pascal ProDOS GS/OS GNO/ME Contiki Apple III Apple SOS Apple Lisa Mac Classic Mac OS A/UX (UNIX System V with BSD extensions) Copland MkLinux Pink Rhapsody macOS (formerly Mac OS X and OS X) macOS Server (formerly Mac OS X Server and OS X Server) Apple Network Server IBM AIX (Apple-customized) Apple MessagePad Newton OS iPhone and iPod Touch iOS (formerly iPhone OS) iPad iPadOS Apple Watch watchOS Apple TV tvOS Embedded operating systems bridgeOS Apple Vision Pro visionOS Embedded operating systems A/ROSE iPod software (unnamed embedded OS for iPod) Unnamed NetBSD variant for Airport Extreme and Time Capsule === Apollo Computer, Hewlett-Packard === Domain/OS – One of the first network-based systems. Run on Apollo/Domain hardware. Later bought by Hewlett-Packard. === Atari === Atari DOS (for 8-bit computers) Atari TOS Atari MultiTOS Contiki (for 8-bit, ST, Portfolio) === BAE Systems === XTS-400 === Be Inc. === BeOS BeIA BeOS r5.1d0 magnussoft ZETA (based on BeOS r5.1d0 source code, developed by yellowTAB) === Bell Labs === Unix ("Ken's new system," for its creator (Ken Thompson), officially Unics and then Unix, the prototypic operating system created in Bell Labs in 1969 that formed the basis for the Unix family of operating systems) UNIX Time-Sharing System v1 UNIX Time-Sharing System v2 UNIX Time-Sharing System v3 UNIX Time-Sharing System v4 UNIX Time-Sharing System v5 UNIX Time-Sharing System v6 MINI-UNIX PWB/UNIX USG CB Unix UNIX Time-Sharing System v7 (It is from Version 7 Unix (and, to an extent, its descendants listed below) that almost all Unix-based and Unix-like operating systems descend.) Unix System III Unix System IV Unix System V Unix System V Releases 2.0, 3.0, 3.2, 4.0, and 4.2 UNIX Time-Sharing System v8 UNIX Time-Sharing System v9 UNIX Time-Sharing System v10 Non-Unix Operating Systems: BESYS Plan 9 from Bell Labs Inferno === Burroughs Corporation, Unisys === Burroughs MCP === CII === Siris 8 === Commodore International === GEOS AmigaOS AROS Research Operating System === Control Data Corporation === ==== Lower 3000 series ==== SCOPE (Supervisory Control Of Program Execution) ==== Upper 3000 series ==== SCOPE (Supervisory Control Of Program Execution) Drum SCOPE ==== 6x00 and related Cyber ==== Chippewa Operating System (COS) MACE (Mansfield and Cahlander Executive) Kronos (Kronographic OS) NOS (Network Operating System) NOS/VE (NOS Virtual Environment) SCOPE (Supervisory Control Of Program Execution) NOS/BE NOS Batch Environment SIPROS (Simultaneous Processing Operating System) ==== Star-100 ==== Multiple Console Time Sharing System (MCTS), from General Motors Research === CloudMosa === Puffin OS === Convergent Technologies === Convergent Technologies Operating System (CTOS) – later acquired by Unisys === Cromemco === Cromemco DOS (CDOS) – a Disk Operating system compatible with CP/M Cromix – a multitasking, multi-user, Unix-like OS for Cromemco microcomputers with Z80A and/or 68000 CPU === Data General === AOS for 16-bit Data General Eclipse computers and AOS/VS for 32-bit (MV series) Eclipses, MP/AOS for microNOVA-based computers DG/UX RDOS Real-time Disk Operating System, with variants: RTOS and DOS (not related to PC DOS, MS-DOS etc.) === Datapoint === CTOS Cassette Tape Operating System for the Datapoint 2200 DOS Disk Operating System for the Datapoint 2200, 5500, and 1100 === DDC-I, Inc. === Deos – Time & Space Partitioned RTOS, Certified to DO-178B, Level A since 1998 HeartOS – POSIX-based Hard Real-Time Operating System === Digital Research, Inc. === CP/M CP/M CP/M for Intel 8080/8085 and Zilog Z80 Personal CP/M, a refinement of CP/M CP/M Plus with BDOS 3.0 CP/M-68K CP/M for Motorola 68000 CP/M-8000 CP/M for Zilog Z8000 CP/M-86 CP/M for Intel 8088/8086 CP/M-86 Plus Personal CP/M-86 MP/M Multi-user version of CP/M-80 MP/M II MP/M-86 Multi-user version of CP/M-86 MP/M 8-16, a dual-processor variant of MP/M for 8086 and 8080 CPUs. Concurrent CP/M, the successor of CP/M-80 and MP/M-80 Concurrent CP/M-86, the successor of CP/M-86 and MP/M-86 Concurrent CP/M 8-16, a dual-processor variant of Concurrent CP/M for 8086 and 8080 CPUs. Concurrent CP/M-68K, a variant for the 68000 DOS Concurrent DOS, the successor of Concurrent CP/M-86 with PC-MODE Concurrent PC DOS, a Concurrent DOS variant for IBM compatible PCs Concurrent DOS 8-16, a dual-processor variant of Concurrent DOS for 8086 and 8080 CPUs Concurrent DOS 286 Concurrent DOS XM, a real-mode variant of Concurrent DOS with EEMS support Concurrent DOS 386 Concurrent DOS 386/MGE, a Concurrent DOS 386 variant with advanced graphics terminal capabilities Concurrent DOS 68K, a port of Concurrent DOS to Motorola 68000 CPUs with DOS source code portability capabilities FlexOS 1.0 – 2.34, a derivative of Concurrent DOS 286 FlexOS 186, a variant of FlexOS for terminals FlexOS 286, a variant of FlexOS for hosts Siemens S5-DOS/MT, an industrial control system based on FlexOS IBM 4680 OS, a POS operating system based on FlexOS IBM 4690 OS, a POS operating system based on FlexOS Toshiba 4690 OS, a POS operating system based on IBM 4690 OS and FlexOS FlexOS 386, a later variant of FlexOS for hosts IBM 4690 OS, a POS operating system based on FlexOS Toshiba 4690 OS, a POS operating system based on IBM 4690 OS and FlexOS FlexOS 68K, a derivative of Concurrent DOS 68K Multiuser DOS, the successor of Concurrent DOS 386 CCI Multiuser DOS Datapac Multiuser DOS Datapac System Manager, a derivative of Datapac Multiuser DOS IMS Multiuser DOS IMS REAL/32, a derivative of Multiuser DOS IMS REAL/NG, the successor of REAL/32 DOS Plus 1.1 – 2.1, a single-user, multi-tasking system derived from Concurrent DOS 4.1 – 5.0 DR-DOS 3.31 – 6.0, a single-user, single-tasking native DOS derived from Concurrent DOS 6.0 Novell PalmDOS 1.0 Novell "Star Trek" Novell DOS 7, a single-user, multi-tasking system derived from DR DOS Caldera OpenDOS 7.01 Caldera DR-DOS 7.02 and higher === Digital Equipment Corporation, Compaq, Hewlett-Packard, Hewlett Packard Enterprise === Batch-11/DOS-11 OS/8 RSTS/E – multi-user time-sharing OS for PDP-11s RSX-11 – multiuser, multitasking OS for PDP-11s RT-11 – single user OS for PDP-11 TOPS-10 – for the PDP-10 TENEX – an ancestor of TOPS-20 from BBN, for the PDP-10 TOPS-20 – for the PDP-10 DEC MICA – for the DEC PRISM Digital UNIX – derived from OSF/1, became HP's Tru64 UNIX Ultrix VMS – originally by DEC (now by VMS Software Inc.) for the VAX mini-computer range; later renamed OpenVMS and ported to Alpha, and subsequently ported to Intel Itanium and then to x86-64 WAITS – for the PDP-6 and PDP-10 === ENEA AB === OSE – Flexible, small footprint, high-performance RTOS for control processors === Fujitsu === Towns OS XSP OS/IV MSP MSP-EX === GEC Computers === COS DOS OS4000 === General Electric, Honeywell, Bull === Real-Time Multiprogramming Operating System GCOS Multics === Google === ChromiumOS is an open source operating system development version of ChromeOS. Both operating systems are based on the Linux kernel. ChromeOS is designed to work exclusively with web applications, though has been updated to run Android apps with full support for Google Play Store. Announced on July 7, 2009, ChromeOS is currently publicly available and was released summer 2011. The ChromeOS source code was released on November 19, 2009, under the BSD license as ChromiumOS. Container-Optimized OS (COS) is an operating system that is optimized for running Docker containers, based on ChromiumOS. Android is an operating system for mobile devices. It consists of Android Runtime (userland) with Linux (kernel), with its Linux kernel modified to add drivers for mobile device hardware and to remove unused Vanilla Linux drivers. gLinux, a Linux distribution that Google uses internally Fuchsia is a capability-based real-time operating system (RTOS) scalable to universal devices, in early development, from the tiniest embedded hardware, wristwatches, tablets to the largest personal computers. Unlike ChromeOS and Android, it is not based on the Linux kernel, but instead began on a new microkernel called "Zircon", derived from "Little Kernel". Wear OS a version of Google's Android operating system designed for smartwatches and other wearables. === Green Hills Software === INTEGRITY – Reliable Operating system INTEGRITY-178B – A DO-178B certified version of INTEGRITY. μ-

    Read more →
  • Video game

    Video game

    A video game, computer game, or simply game is an electronic game that involves interaction with a user interface or input device (such as a joystick, controller, keyboard, or motion sensing device) to generate visual feedback from a display device, most commonly shown in a video format on a television set, computer monitor, flat-panel display or touchscreen on handheld devices, or a virtual reality headset. Most modern video games are audiovisual, with audio complement delivered through speakers or headphones, and sometimes also with other types of sensory feedback (e.g., haptic technology that provides tactile sensations). Some video games also allow microphone and webcam inputs for in-game chatting and livestreaming. Video games are typically categorized according to their hardware platform, which traditionally includes arcade video games, console games, and computer games (which includes LAN games, online games, and browser games). More recently, the video game industry has expanded onto mobile gaming through mobile devices (such as smartphones and tablet computers), virtual and augmented reality systems, and remote cloud gaming. Video games are also classified into a wide range of genres based on their style of gameplay and target audience. The first video game prototypes in the 1950s and 1960s were simple extensions of electronic games using video-like output from large, room-sized mainframe computers. The first consumer video game was the arcade video game Computer Space in 1971, which took inspiration from the earlier 1962 computer game Spacewar!. In 1972 came the now-iconic video game Pong and the first home console, the Magnavox Odyssey. The industry grew quickly during the "golden age" of arcade video games from the late 1970s to early 1980s but suffered from the crash of the North American video game market in 1983 due to loss of publishing control and saturation of the market. Following the crash, the industry matured, was dominated by Japanese companies such as Nintendo, Sega, and Sony, and established practices and methods around the development and distribution of video games to prevent a similar crash in the future, many of which continue to be followed. In the 2000s, the core industry centered on "AAA" games, leaving little room for riskier experimental games. Coupled with the availability of the Internet and digital distribution, this gave room for independent video game development (or "indie games") to gain prominence into the 2010s. Since then, the commercial importance of the video game industry has been increasing. The emerging Asian markets and proliferation of smartphone games in particular are altering player demographics towards casual and cozy gaming, and increasing monetization by incorporating games as a service. Today, video game development requires numerous skills, vision, teamwork, and liaisons between different parties, including developers, publishers, distributors, retailers, hardware manufacturers, and other marketers, to successfully bring a game to its consumers. As of 2020, the global video game market had estimated annual revenues of US$159 billion across hardware, software, and services, which is three times the size of the global music industry and four times that of the film industry in 2019, making it a formidable heavyweight across the modern entertainment industry. The video game market is also a major influence behind the electronics industry, where personal computer component, console, and peripheral sales, as well as consumer demands for better game performance, have been powerful driving factors for hardware design and innovation. == Origins == Early video games used interactive electronic devices with various display formats. The earliest example dates to 1947—a "cathode-ray tube amusement device" was filed for a patent on 25 January 1947, by Thomas T. Goldsmith Jr. and Estle Ray Mann, and issued on 14 December 1948, as U.S. Patent 2455992. Inspired by radar display technology, it consisted of an analog device allowing a user to control the parabolic arc of a dot on the screen to simulate a missile being fired at targets, which were paper drawings fixed to the screen. Other early examples include the Nimrod computer at the 1951 Festival of Britain; Christopher Strachey's Checkers, possibly the first game to display visuals on an electronic screen in 1952; OXO, a tic-tac-toe computer game by Alexander S. Douglas for the EDSAC in 1952; Tennis for Two, an electronic interactive game engineered by William Higinbotham in 1958; and Spacewar!, written by Massachusetts Institute of Technology students Martin Graetz, Steve Russell, and Wayne Wiitanen's on a DEC PDP-1 computer in 1962. Each game had different means of display: NIMROD had a panel of lights to play the game of Nim, OXO had a graphical display to play tic-tac-toe, Tennis for Two had an oscilloscope to display a side view of a tennis court, and Spacewar! had the DEC PDP-1's vector display to have two spaceships battle each other. These inventions laid the foundation for modern video games. In 1966, while working at Sanders Associates, Ralph H. Baer devised a system to play a basic table tennis game on a television screen. With the company's approval, Baer created the prototype known as the "Brown Box". Sanders patented Baer's innovations and licensed them to Magnavox, which commercialized the technology as the first home video game console, the Magnavox Odyssey, released in 1972. Separately, Nolan Bushnell and Ted Dabney, inspired by seeing Spacewar! running at Stanford University, devised a similar version running in a smaller coin-operated arcade cabinet using a less expensive computer. This was released as Computer Space, the first arcade video game, in 1971. Bushnell and Dabney went on to form Atari, Inc., and with Allan Alcorn, created their second arcade game in 1972, the hit ping pong-style Pong, which was directly inspired by the table tennis game on the Odyssey. Atari made a home version of Pong, which was released by Christmas 1975. The success of the Odyssey and Pong, both as an arcade game and home machine, launched the video game industry. Both Baer and Bushnell have been titled "Father of Video Games" for their contributions. == Terminology == The term "video game" was developed to describe electronic games played on a video display rather than on a teletype printer, audio speaker, or similar device. This also distinguished from handheld electronic games such as Merlin, which commonly used LED lights for indicators not in combination for imaging purposes. "Computer game" may also be used as a descriptor, as all these types of games essentially require the use of a computer processor; in some cases, it is used interchangeably with "video game". Particularly in the United Kingdom and Western Europe, this is common due to the historic relevance of domestically produced microcomputers. Other terms used include digital game, for example, by the Australian Bureau of Statistics. The term "computer game" can also refer to PC games, which are played primarily on personal computers or other flexible hardware systems, to distinguish them from console games, arcade games, or mobile games. Other terms, such as "television game", "telegame", or "TV game", had been used in the 1970s and early 1980s, particularly for home gaming consoles that rely on connection to a television set. However, these terms were also used interchangeably with "video game" in the 1970s, primarily due to "video" and "television" being synonymous. In Japan, where consoles like the Odyssey were first imported and then made within the country by the large television manufacturers such as Toshiba and Sharp Corporation, such games are known as "TV games", "TV geemu", or "terebi geemu". The term "TV game" is still commonly used into the 21st century. "Electronic game" may also be used to refer to video games, but this also incorporates devices like early handheld electronic games that lack any video output. The first appearance of the term "video game" emerged around 1973. The Oxford English Dictionary cited a 10 November 1973 BusinessWeek article as the first printed use of the term. Though Bushnell believed the term came from a vending magazine review of Computer Space in 1971, a review of the major vending magazines Vending Times and Cashbox showed that the term may have come even earlier, appearing first in a letter dated July 10, 1972. In the letter, Bushnell uses the term "video game" twice. Per video game historian Keith Smith, the sudden appearance suggested that the term had been proposed and readily adopted by those in the field. Around March 1973, Ed Adlum, who ran Cashbox's coin-operated section until 1972 and then later founded RePlay Magazine, covering the coin-op amusement field, in 1975, used the term in an article in March 1973. In a September 1982 issue of RePlay, Adlum is credited with first naming these games as "video games": "RePlay

    Read more →
  • Digital studio

    Digital studio

    A digital studio provides both a technology-equipped space and technological/rhetorical support to students (commonly at a university) working individually or in groups on a variety of digital projects, such as designing a website, developing an electronic portfolio for a class, creating a blog, making edits, selecting images for a visual essay, or writing a script for a podcast. == History/theory == === Overview === Digital Studios are places with different names but similar objectives. They have risen in response to the need for resources dedicated to improving students' interactions with digital technologies for rhetorical ends. Digital Studios have often been theoretically and administratively linked to writing centers, which are sites where students can seek assistance with their text-based projects. The academic term that has been used for this kind of site (i.e. a writing center with a focus on digital and new media) is multiliteracy center. Besides having a multimodal focus, Digital Studios also make a departure from writing center model in allowing students the freedom to work in the Studio without one-on-one interaction with a writing tutor. === The rise of technology === ==== Computer literacy in popular culture ==== As early as 1983, computer literacy was being hailed in The New York Times as the "new goal in schools." As computer technology became more ubiquitous, and the World Wide Web became more popular and accessible, and as the teaching of computer skills became official US policy with the enactment of the "Technology Literacy Challenge" by the Clinton Administration in 1996, educators across disciplines began to investigate with renewed vigor the role of computer technology in curriculum as both a means and an end. ==== Scholarly interest in 'multiliteracies' ==== The same year that President Clinton initiated the "Technology Literacy Challenge", the New London Group (NLG) issued a call for scholars of literacy pedagogy to account for the burgeoning variety of text forms associated with information and multimedia technologies. This includes understanding and competent control of representational forms that are becoming increasingly significant in the overall communications environment, such as visual images and their relationship to the written word – for instance, visual design in desktop publishing or the interface of visual and linguistic meaning in multimedia. This account for new text forms, combined with a similar account for "increasingly globalized societies," is called 'multiliteracies' by the NLG. ==== Technological literacy in rhetoric and composition ==== Two years later, during the 1998 CCCC Chair's Address, Cynthia Selfe (who founded the peer-reviewed journal Computers and Composition in 1983) addressed professionals in the field of Rhetoric and Composition with an objective similar to that of the NLG, arguing that as a field, composition scholars had "paid technology issues precious little focused attention over the years." She called this lack of attention "dangerously shortsighted." What was needed, Selfe claimed, was for teachers to "pay attention" to "how technology is now inextricably linked with literacy and literacy education in this country." In a way, Selfe's call marked the beginning of a new scholarly interest in what Selfe called "critical technological literacy": Composition teachers, language arts teachers, and other literacy specialists need to recognize that the relevance of technology in the English studies disciplines is not simply a matter of helping students work effectively with communication software and hardware, but, rather, also a matter of helping them to understand and to be able to assess – to pay attention to – the social, economic, and pedagogical implications of new communication technologies and technological initiatives that affect their lives. Scholars who took up this call included Barbara Blakely Duffelmeyer, who conducted studies involving the incorporation of "critical computer literacy" (an adaptation of Selfe's term) into first-year composition. ==== Communications across media, inside and outside school ==== The years following Selfe's address saw more rapid advancements in mobile technologies, social media, and Web 2.0, creating even more new venues of composing for teachers to pay attention to. In her own CCCC Chair's Address in 2004, Kathleen Blake Yancey cited these new venues in her argument as a "new curriculum for the 21st century," one that would bring "together the writing outside of school and that of inside." Such a curriculum, she said: is located in a new vocabulary, a new set of practices, and a new set of outcomes; it will focus our research in new and provocative ways; it has as its goal the creation of thoughtful, informed, technologically adept writing publics. A professor at Clemson at the time of her speech, Yancey also argued for the creation of an undergraduate major in composition and rhetoric. She soon moved to Florida State University, where she helped to establish a new major in line with the one she argued for at CCCC called Editing, Writing, and Media (EWM). As teachers and administrators across the country looked to incorporate more digital technology into their curriculum, the need for spaces for digital composition and for support with the innumerable digital composing platforms became apparent. A Digital Studio is one such space. === Link with writing centers === With the need for support for students who would engage with digital writing and multimedia projects, professionals involved with work in writing centers began to draw comparisons between their traditional work — assisting students with alphabetic texts on the page — and a new kind of work: assisting students with their multimedia projects on the screen. John Trimbur predicted in 2000: My guess is that writing centers will more and more define themselves as multiliteracy centers. Many are already doing so – tutoring oral presentations, adding online tutorials, offering workshops in evaluating web sources, and being more conscious of document design. To my mind, new digital literacies will increasingly be incorporated into writing centers not just as sources of information or delivery systems for tutoring but as productive arts in their own right, and writing center work will, if anything, become more rhetorical in paying attention to the practices and effects of design in written and visual communication — more product-oriented and perhaps less like the composing conferences of the process movement. Later, just months before Yancey delivered her CCCC Chair's Address, Michael Pemberton, writing in the Writing Center Journal, asked: As we enter an era when electronic publishing and computer-mediated discourse are the norm, an era when new literary genres and new forms of communication emerge on, seemingly, a weekly basis, we must ask ourselves whether writing centers should continue to dwell exclusively in the linear, non-linked world of the printed page or whether they should plan to redefine themselves – and retrain themselves – to take residence in the emerging world of multimedia, hyperlinked, digital documents. To put it plainly, should we be preparing tutors to conference with students about hypertexts? Pemberton also surveyed (by his account) the forty-year history of how "writing centers [have] viewed new technologies," observing that "the relationship between writing centers and computer technology has been, overall, only a cordial one." Pemberton's article is evidence of the continuing discussion among writing center professionals about the need for support for students' digital creations, support which they saw as analogous to work in writing centers. In 2010, a collection edited by David Sheridan and James Inman, Multiliteracy Centers: Writing Center Work, New Media, and Multimodal Rhetoric, was published. Many of the chapters therein cite the above Trimbur and Pemberton quotes as they work to explain the exigence for the collection, the instances in which multiliteracy centers have been established (the founding of the Clemson Class of 1941 Studio for Student Communication is the subject of two chapters), and both theoretical and practical analyses of potential futures of such work. === 'Studio' vs. 'Center:' A break from the model === The conflation of digital studios and writing centers into multiliteracy centers is helpful in some respects, for example, administratively the two may be managed in similar ways and staffed by the same people. In other respects, it has been said that it is better to separate them into two distinct kinds of facilities. The very choice of naming a "writing center" or "digital studio" by either (or another) title, for instance, ought (according to some) to be informed by what kinds of student-activities are expected to take place there. A writing center is a place for individual students to seek help from individual writing

    Read more →
  • Corel Designer

    Corel Designer

    Corel DESIGNER is a vector-based graphics program. It was originally developed by Micrografx, which was bought by Corel in 2001. The last version developed by Micrografx was 9.0 in 2001. This program was later sold as Corel DESIGNER 9. There are still a number of users who continue working with version 9.0, because newer versions of the product are based on a modified CorelDRAW rather than the original product. Corel DESIGNER is effective for the creation of engineering drawings, but also offers many functions for graphic design. Starting with version X5, Corel DESIGNER Technical Suite includes Corel Designer, CorelDRAW and Corel Photo-Paint. X6 was the last release for Windows XP. == Release history and file formats ==

    Read more →
  • Digital intermediate

    Digital intermediate

    Digital intermediate (DI) is a motion picture finishing process which classically involves digitizing a motion picture and manipulating the color and other image characteristics. == Definition and overview == A digital intermediate often replaces or augments the photochemical timing process and is usually the final creative adjustment to a movie before distribution in theaters. It is distinguished from the telecine process in which film is scanned and color is manipulated early in the process to facilitate editing. However the lines between telecine and DI are continually blurred and are often executed on the same hardware by colorists of the same background. These two steps are typically part of the overall color management process in a motion picture at different points in time. A digital intermediate is also customarily done at higher resolution and with greater color fidelity than telecine transfers. Although originally used to describe a process that started with film scanning and ended with film recording, digital intermediate is also used to describe color correction and color grading and even final mastering when a digital camera is used as the image source and/or when the final movie is not output to film. This is due to recent advances in digital cinematography and digital projection technologies that strive to match film origination and film projection. In traditional photochemical film finishing, an intermediate is produced by exposing film to the original camera negative. The intermediate is then used to mass-produce the films that get distributed to theaters. Color grading is done by varying the amount of red, green, and blue light used to expose the intermediate. The digital intermediate process uses digital tools to color grade, which allows for much finer control of individual colors and areas of the image, and allows for the adjustment of image structure (grain, sharpness, etc.). The intermediate for film reproduction can then be produced by means of a film recorder. The physical intermediate film that is a result of the recording process is sometimes also called a digital intermediate, and is usually recorded to internegative (IN) stock, which is inherently finer-grain than original camera negative (OCN). One of the key technical achievements that made the transition to DI possible was the use of 3D look-up tables, which could be used to mimic how the digital image would look once it was printed onto release print stock. This removed a large amount of guesswork from the film-making process, and allowed greater freedom in the colour grading process while reducing risk. The digital master is often used as a source for a DCI-compliant distribution of the motion picture for digital projection. For archival purposes, the digital master created during the digital intermediate process can be recorded to very stable high dynamic range yellow-cyan-magenta (YCM) separations on black-and-white film with an expected 100-year or longer life. While still subject to the natural degradation of any analog chemical master, this archival format, long used in the industry prior to the invention of DI, was considered valuable for providing an archival medium that is independent of changes in digital data recording technologies and file formats that might otherwise render digitally archived material unreadable in the long term. A "film intermediate" is an analog variation of a digital intermediate, where a project shot on digital video is printed onto film stock and transferred back to digital video to emulate film. The term was coined after it was used on the Oscar-winning 2012 short film "Curfew". The process was also used on the films Dune (2021) and The Batman (2022). == History == Telecine tools to electronically capture film images are nearly as old as broadcast television, but the resulting images were widely considered unsuitable for exposing back onto film for theatrical distribution. Film scanners and recorders with quality sufficient to produce images that could be inter-cut with regular film began appearing in the 1970s, with significant improvements in the late 1980s and early 1990s. During this time, digitally processing an entire feature-length film was impractical because the scanners and recorders were extremely slow and the image files were too large compared to computing power available. Instead, individual shots or short sequences were processed for visual effects. In 1992, Visual Effects Supervisor/Producer Chris F. Woods broke through several "techno-barriers" in creating a digital studio to produce the visual effects for the 1993 release Super Mario Bros. It was the first feature film project to digitally scan a large number of VFX plates (over 700) at 2K resolution. It was also the first film scanned and recorded at Kodak's just launched Cinesite facility in Hollywood. This project based studio was the first feature film to use Discreet Logic's (now Autodesk) Flame and Inferno systems, which enjoyed early dominance as high resolution / high performance digital compositing systems. Digital film compositing for visual effects was immediately embraced, while optical printer use for VFX declined just as quickly. Chris Watts further revolutionized the process on the 1998 feature film Pleasantville, becoming the first visual effects supervisor for New Line Cinema to scan, process, and record the majority of a feature-length, live-action, Hollywood film digitally. The first Hollywood film to utilize a digital intermediate process from beginning to end was O Brother, Where Art Thou? in 2000 and in Europe it was Chicken Run released that same year. The process rapidly caught on in the mid-2000s. Around 50% of Hollywood films went through a digital intermediate in 2005, increasing to around 70% by mid-2007. This is due not only to the extra creative options the process affords film makers but also the need for high-quality scanning and color adjustments to produce movies for digital cinema. == Milestones == 1990: The Rescuers Down Under – First feature-length film to be entirely recorded to film from digital files; in this case animation assembled on computers using Walt Disney Feature Animation and Pixar's CAPS system. 1992: Visual effects supervisor and producer Chris F. Woods creates a VFX studio to produce the visual effects for the 1993 film Super Mario Bros. It was the first 35mm feature film to digitally scan a large number of VFX plates (over 700) at 2K resolution, as well as to output the finished VFX to 35mm negative at 2K. 1993: Snow White and the Seven Dwarfs – First film to be entirely scanned to digital files, manipulated, and recorded back to film at 4K resolution. The restoration project was done entirely at 4K resolution and 10-bit color depth using the Cineon system to digitally remove dirt and scratches and restore faded colors. 1998: Pleasantville – The first time the majority of a new feature film was scanned, processed, and recorded digitally. The black-and-white meets color world portrayed in the movie was filmed entirely in color and selectively desaturated and contrast adjusted digitally. The work was done in Los Angeles by Cinesite utilizing a Spirit DataCine for scanning at 2K resolution and a MegaDef color correction system from UK Company Pandora International 1998: Zingo - The first feature film to use digital color correction via digital intermediate in its entirety. The work was performed at the Digital Film Lab in Copenhagen, using a Spirit Datacine to transfer the entire film to digital files at 2K resolution. The digital intermediate process was also used to perform a digital blowup of the film's original Super 16 source format to a 35mm output. 1999: Pacific Ocean Post Film, a team led by John McCunn and Greg Kimble used Kodak film scanners & laser film printer, Cineon software as well as proprietary tools to rebuild and repair the first two reels of the 1968 Beatles' film Yellow Submarine for re-release. 1999: Star Wars: Episode I – The Phantom Menace - Industrial Light & Magic (ILM) scanned the entirety of the visual effects-laden film for the purposes of digital enhancement and the integration of thousands of separately filmed elements with computer generated characters and environments. Outside of the approximately 2000 effects shots that were digitally manipulated, the remaining 170 non-effects shots were also scanned for continuity. However, after the digital shots were manipulated at ILM, they were filmed out individually and sent to Deluxe Labs where they were processed and color timed photochemically. 2000: Sorted - The first feature-length, color 35mm motion picture to fully utilize the digital intermediate process in its entirety from inception to completion. The film was produced at Wave Pictures' digital intermediate film facility in London, England. It was scanned at 2K resolution with 8 bits color depth per color / per pixel using a pin registered, liquid gate Oxberry

    Read more →
  • Digital redlining

    Digital redlining

    Digital redlining is the practice of creating and perpetuating inequities between already marginalized groups specifically through the use of digital technologies, digital content, and the internet. The concept of digital redlining is an extension of the practice of redlining in housing discrimination, a historical legal practice in the United States and Canada dating back to the 1930s where red lines were drawn on maps to indicate poor and primarily black neighborhoods that were deemed unsuitable for loans or further development, which created great economic disparities between neighborhoods. The term was popularized by Dr. Chris Gilliard, a privacy scholar, who defines digital redlining as "the creation and maintenance of tech practices, policies, pedagogies, and investment decisions that enforce class boundaries and discriminate against specific groups". Though digital redlining is related to the digital divide and techniques such as weblining and personalization, it is distinct from these concepts as part of larger complex systemic issues. It can refer to practices that create inequities of access to technology services in geographical areas, such as when internet service providers decide to not service specific geographic areas because they are perceived to be not as profitable and thus reduce access to crucial services and civic participation. It can also be used to refer to inequities caused by the policies and practices of digital technologies. For instance, with these methods inequities are accomplished through divisions that are created via algorithms which are hidden from the technology user; the use of big data and analytics allow for a much more nuanced form of discrimination that can target specific vulnerable populations. These algorithmic means are enabled through the use of unregulated data technologies that apply a score to individuals that statistically categorize personality traits or tendencies which are similar to a credit score but are proprietary to the technology companies and not under outside oversight. == Digital redlining and geography == While the roots of redlining lie in excluding populations based on geography, digital redlining occurs in both geographical and non-geographical contexts. An example of both contexts can be found in the charges brought against Facebook on March 28 of 2019, by the United States Department of Housing and Urban Development (HUD). HUD charged Facebook with violating the Fair Housing Act of 1968 by "encouraging, enabling, and causing housing discrimination through the company's advertising platform." HUD stated that Facebook allowed advertisers to “exclude people who live in a specified area from seeing an ad by drawing a red line around that area.” The discrimination called out by HUD included those that were racist, homophobic, ableist, and classist. Besides this example of geographically based digital redlining, HUD also charged that Facebook used profile information and designations to exclude classes of people. The charges stated: "Facebook enabled advertisers to exclude people whom Facebook classified as parents; non-American-born; non-Christian; interested in accessibility; interested in Hispanic culture; or a wide variety of other interests that closely align with the Fair Housing Act’s protected classes" Several media outlets pointed out HUDs own history of housing discrimination through redlining, the establishment of the Fair Housing Act to combat redlining, and how the digital platform was recreating this discriminatory practice. === Digital redlining within a geographical context === Although digital redlining refers to a complex and varied set of practices, it has been most commonly applied to practices with a geographical dimension. Common examples include when an internet service providers decide to not service specific geographic areas because those areas are seen to be not as profitable, resulting in discrimination against low-income communities, with resulting impacts on access to crucial services and civic participation. AT&T has faced specific scrutiny for this form of digital redlining, it has been reported that AT&T has been classist in its offerings of broadband internet service in areas that are more impoverished. Geographically based digital redlining can also apply to digital content or the distribution of goods sold online. Geographically based games such as Pokémon Go have been shown to offer more virtual stops and rewards in geographic areas that are less ethnically and racially diverse. In 2016, Amazon was rebuked for not offering their Prime same-day delivery service to many communities that were largely African American and had incomes that were beneath the national average. Even services such as email can be impacted, with many email administrators creating filters for flagging particular email messages as spam based on the geographical origin of the message. === Digital redlining based on personal identity === Although often aligned with discrimination that falls into a geographically based context digital redlining also refers to when vulnerable populations are targeted for or excluded from specific content or access to the internet in a way that harms them based on some aspect of their identity. Trade schools and community colleges, which typically have a more working class student body, have been found to block public internet content from their students where elite research institutions do not. The use of big data and analytics allow for a much more nuanced form of discrimination that can target specific vulnerable populations. For example, Facebook has been criticized for providing tools that allow advertisers to target ads by ethnic affinity and gender, effectively blocking minorities from seeing specific ads for housing and employment. In October 2019, a major class action lawsuit was filed against Facebook alleging gender and age discrimination in financial advertising. A broad array of consumers can be particularly vulnerable to digital redlining when it is used outside of a geographical context. Besides targeting vulnerable populations based on traditional and legally recognized classifications such as race, gender, age, etc., it has been shown that personal data mined and then resold by brokers can be used to target those who have been identified as suffering from Alzheimer's or dementia, or simply identified as impulse buyers or gullible. == Term distinctions == === Distinctions between weblining and digital redlining === Earlier distinctions have been made between weblining—the process of charging customers different prices based on profile information --- and internet or digital redlining, with digital redlining being focused not on pricing but access. As early as 2002 the Gale Encyclopedia of E-Commerce puts forth the distinction more in use today: weblining is the pervasive and generally accepted (or at least tolerated) practice of personalizing access to products and services in ways invisible to the user; digital redlining is when such personalized, data-driven schemes perpetuate traditional advantages of privileged demographics. As weblining has become more ubiquitous, the term has fallen out of use in favor of the more general term personalization. === Distinctions between the digital divide and digital redlining === Scholars have often drawn connections between the digital divide and digital redlining. In practice, the digital divide is seen as one of a number of impacts of digital redlining, and digital redlining is one of a number of ways in which the divide is maintained or extended. == Criticisms == A 2001 report looked to find if the reason for a gap in access to broadband internet by low-income and minority populations was due to a lack of availability or due to other factors. The report found that there was "little evidence of digital redlining based on income or black or Hispanic concentrations" but that there was mixed evidence of redlining based on areas in which Native American or Asian populations were larger.

    Read more →
  • VHS

    VHS

    VHS (Video Home System) is a discontinued standard for consumer-level analog video recording on tape cassettes, introduced in 1976 by JVC. It was the dominant home video format throughout the tape media period of the 1980s and 1990s. Magnetic tape video recording was adopted by the television industry in the 1950s in the form of the first commercialized video tape recorders (VTRs), but the devices were expensive and used only in professional environments. In the 1970s, videotape technology became affordable for home use, and widespread adoption of videocassette recorders (VCRs) began; the VHS became the most popular media format for VCRs as it would win the "format war" against Betamax (backed by Sony) and a number of other competing tape standards. The cassettes themselves use a 0.5-inch (12.7 mm) magnetic tape between two spools and typically offer a capacity of at least two hours. The popularity of VHS was intertwined with the rise of the video rental market, when films were released on pre-recorded videotapes for home viewing. Newer improved tape formats such as S-VHS were later developed, as well as the earliest optical disc format, LaserDisc; the lack of global adoption of these formats increased VHS's lifetime, which eventually peaked and started to decline in the late 1990s after the introduction of DVD, a digital optical disc format. VHS rentals were surpassed by DVD in the United States in 2003, which eventually became the preferred low-end method of movie distribution. For home recording purposes, VHS and VCRs were surpassed by (typically hard disk–based) digital video recorders (DVR) in the 2000s. Production of all VHS equipment ceased by 2016, although the format has since gained some popularity amongst collectors. A niche revival of VHS has taken place with This Is How The World Ends becoming the first straight-to-VHS release in 20 years. == History == === Before VHS === In 1956, after several attempts by other companies, the first commercially successful VTR, the Ampex VRX-1000, was introduced by Ampex Corporation. At a price of US$50,000 in 1956 (equivalent to $592,000 in 2025) and US$300 (equivalent to $3,600 in 2025) for a 90-minute reel of tape, it was intended only for the professional market. Kenjiro Takayanagi, a television broadcasting pioneer then working for JVC as its vice president, saw the need for his company to produce VTRs for the Japanese market at a more affordable price. In 1959, JVC developed a two-head video tape recorder and, by 1960, a color version for professional broadcasting. In 1964, JVC released the DV220, which would be the company's standard VTR until the mid-1970s. In 1969, JVC collaborated with Sony and Matsushita Electric (Matsushita was the majority stockholder of JVC until 2011) to build a video recording standard for the Japanese consumer. The effort produced the U-matic format in 1971, which was the first cassette format to become a unified standard for different companies. It was preceded by the reel-to-reel 1⁄2-inch EIAJ format. The U-matic format was successful in businesses and some broadcast television applications, such as electronic news-gathering, and was produced by all three companies until the late 1980s, but because of cost and limited recording time, very few of the machines were sold for home use. Therefore, soon after the U-Matic release, all three companies started working on new consumer-grade video recording formats of their own. Sony started working on Betamax, Matsushita started working on VX, and JVC released the CR-6060 in 1975, based on the U-matic format. === VHS development === In 1971, JVC engineers Yuma Shiraishi and Shizuo Takano put together a team to develop a VTR for consumers. By the end of 1971, they created an internal diagram, "VHS Development Matrix", which established twelve objectives for JVC's new VTR; among them: The system must be compatible with any ordinary television set. Picture quality must be similar to a normal air broadcast. The tape must have at least a two-hour recording capacity. Tapes must be interchangeable between machines. The overall system should be versatile, meaning it can be scaled and expanded, such as connecting a video camera, or dubbing between two recorders. Recorders should be affordable, easy to operate, and have low maintenance costs. Recorders must be capable of being produced in high volume, their parts must be interchangeable, and they must be easy to service. In early 1972, the commercial video recording industry in Japan took a financial hit. JVC cut its budgets and restructured its video division, shelving the VHS project. However, despite the lack of funding, Takano and Shiraishi continued to work on the project in secret. By 1973, the two engineers had produced a functional prototype. === Competition with Betamax === In 1974, the Japanese Ministry of International Trade and Industry (MITI), desiring to avoid consumer confusion, attempted to force the Japanese video industry to standardize on just one home video recording format. Later, Sony had a functional prototype of the Betamax format, and was very close to releasing a finished product. With this prototype, Sony persuaded the MITI to adopt Betamax as the standard, and allow it to license the technology to other companies. JVC believed that an open standard, with the format shared among competitors without licensing the technology, was better for the consumer. To prevent the MITI from adopting Betamax, JVC worked to convince other companies, in particular Matsushita (Japan's largest electronics manufacturer at the time, marketing its products under the National brand in most territories and the Panasonic brand in North America, and JVC's majority stockholder), to accept VHS, and thereby work against Sony and the MITI. Matsushita agreed, fearing Sony would dominate the market with a Betamax monopoly. Matsushita also regarded Betamax's one-hour recording time limit as a disadvantage. Matsushita's backing of JVC persuaded Hitachi, Mitsubishi, and Sharp to back the VHS standard as well. Sony's release of its Betamax unit to the Japanese market in 1975 placed further pressure on the MITI to side with the company. However, the collaboration of JVC and its partners was much stronger, which eventually led the MITI to drop its push for an industry standard. JVC released the first VHS machines in Japan in late 1976, and in the United States in mid-1977. Sony's Betamax competed with VHS throughout the late 1970s and into the 1980s (see Videotape format war). Betamax's major advantages were its smaller cassette size, theoretical higher video quality, and earlier availability, but its shorter recording time proved to be a major shortcoming. Originally, Beta I machines using the NTSC television standard were able to record one hour of programming at their standard tape speed of 1.5 inches per second (ips). The first VHS machines could record for two hours, due to both a slightly slower tape speed (1.31 ips) and significantly longer tape. Betamax's smaller cassette limited the size of the reel of tape, and could not compete with VHS's two-hour capability by extending the tape length. Instead, Sony had to slow the tape down to 0.787 ips (Beta II) in order to achieve two hours of recording in the same cassette size. Sony eventually created a Beta III speed of 0.524 ips, which allowed NTSC Betamax to break the two-hour limit, but by then VHS had already won the format battle. Additionally, VHS had a "far less complex tape transport mechanism" than Betamax, and VHS machines were faster at rewinding and fast-forwarding than their Sony counterparts. VHS eventually won the war, gaining 60% of the North American market by 1980. == Initial releases of VHS-based devices == The first VCR to use VHS was the Victor HR-3300, and was introduced by the president of JVC in Japan on September 9, 1976. JVC started selling the HR-3300 in Akihabara, Tokyo, Japan, on October 31, 1976. Region-specific versions of the JVC HR-3300 were also distributed later on, such as the HR-3300U in the United States, and the HR-3300EK in the United Kingdom. The United States received its first VHS-based VCR, the RCA VBT200, on August 23, 1977. The RCA unit was designed by Matsushita and was the first VHS-based VCR manufactured by a company other than JVC. It was also capable of recording four hours in LP (long play) mode. The UK received its first VHS-based VCR, the Victor HR-3300EK, in 1978. Quasar and General Electric followed-up with VHS-based VCRs – all designed by Matsushita. By 1999, Matsushita alone produced just over half of all Japanese VCRs. TV/VCR combos, combining a TV set with a VHS mechanism, were also once available for purchase. Combo units containing both a VHS mechanism and a DVD player were introduced in the late 1990s, and at least one combo unit, the Panasonic DMP-BD70V, included a Blu-ray player. == Technical details == VHS has been standardized in IEC 60774–1. === Cassette and

    Read more →
  • Stencil buffer

    Stencil buffer

    A stencil buffer is an extra data buffer, in addition to the color buffer and Z-buffer, found on modern graphics hardware. The buffer is per pixel and works on integer values, usually with a depth of one byte per pixel. The Z-buffer and stencil buffer often share the same area in the RAM of the graphics hardware. In the simplest case, the stencil buffer is used to limit the area of rendering (stenciling). More advanced usage of the stencil buffer makes use of the strong connection between the Z-buffer and the stencil buffer in the rendering pipeline. For example, stencil values can be automatically increased/decreased for every pixel that fails or passes the depth test. The simple combination of depth test and stencil modifiers make a vast number of effects possible (such as stencil shadow volumes, Two-Sided Stencil, compositing, decaling, dissolves, fades, swipes, silhouettes, outline drawing, or highlighting of intersections between complex primitives) though they often require several rendering passes and, therefore, can put a heavy load on the graphics hardware. The most typical application is still to add shadows to 3D applications. It is also used for planar reflections. Other rendering techniques, such as portal rendering, use the stencil buffer in other ways; for example, it can be used to find the area of the screen obscured by a portal and re-render those pixels correctly. The stencil buffer and its modifiers can be accessed in computer graphics by using APIs like OpenGL, Direct3D, Vulkan or Metal. == Architecture == The stencil buffer typically shares the same memory space as the Z-buffer, and typically the ratio is 24 bits for Z-buffer + 8 bits for stencil buffer or, in the past, 15 bits for Z-buffer + 1 bit for stencil buffer. Another variant is 4 + 24, where 28 of the 32 bits are used and 4 ignored. Stencil and Z-buffers are part of the frame buffer, coupled to the color buffer. The first chip available to a wider market was 3Dlabs' Permedia II, which supported a one-bit stencil buffer. The bits allocated to the stencil buffer can be used to represent numerical values in the range [0, 2n-1], and also as a Boolean matrix (n is the number of allocated bits), each of which may be used to control the particular part of the scene. Any combination of these two ways of using the available memory is also possible. == Stencil test == Stencil test or stenciling is among the operations on the pixels/fragments (Per-pixel operations), located after the alpha test, and before the depth test. The stencil test ensures undesired pixels do not reach the depth test. This saves processing time for the scene. Similarly, the alpha test can prevent corresponding pixels to reach the stencil test. The test itself is carried out over the stencil buffer to some value in it, or altered or used it, and carried out through the so-called stencil function and stencil operations. The stencil function is a function by which the stencil value of a certain pixel is compared to a given reference value. If this comparison is logically true, the stencil test passes. Otherwise not. In doing so, the possible reaction caused by the result of comparing three different state-depth and stencil buffer: Stencil test is not passed Stencil test is passed but not the depth test Both tests are passed (or stencil test is passed, and the depth is not enabled) For each of these cases, different operations can be set over the examined pixel. In the OpenGL stencil functions, the reference value and mask, respectively, define the function glStencilFunc. In Direct3D each of these components is adjusted individually using methods SetRenderState devices currently in control. This method expects two parameters, the first of which is a condition that is set and the other its value. In the order that was used above, these conditions are called D3DRS_STENCILFUNC, D3DRS_STENCILREF, and D3DRS_STENCILMASK. Stencil operations in OpenGL adjust glStencilOp function that expects three values. In Direct3D, again, each state sets a specific method SetRenderState. The three states that can be assigned to surgery are called D3DRS_STENCILFAIL, D3DRENDERSTATE_STENCILZFAIL, and D3DRENDERSTATE_STENCILPASS. == Z-fighting == Due to the lack of precision in the Z-buffer, coplanar polygons that are short-range, or overlapping, can be portrayed as a single plane with a multitude of irregular cross-sections. These sections can vary depending on the camera position and other parameters and are rapidly changing. This is called Z-fighting. There exist multiple solutions to this issue: - Bring the far plane closer to restrict the scene's depth, thus increasing the accuracy of the Z-buffer, or reducing the distance at which objects are visible in the scene. - Increase the number of bits allocated to the Z-buffer, which is possible at the expense of memory for the stencil buffer. - Move polygons farther apart from one another, which restricts the possibilities for the artist to create an elaborate scene. All of these approaches to the problem can only reduce the likelihood that the polygons will experience Z-fighting, and do not guarantee a definitive solution in the general case. A solution that includes the stencil buffer is based on the knowledge of which polygon should be in front of the others. The silhouette of the front polygon is drawn into the stencil buffer. After that, the rest of the scene can be rendered only where the silhouette is negative, and so will not clash with the front polygon. == Shadow volume == Shadow volume is a technique used in 3D computer graphics to add shadows to a rendered scene. They were first proposed by Frank Crow in 1977 as the geometry describing the 3D shape of the region occluded from a light source. A shadow volume divides the virtual world in two: areas that are in shadow and areas that are not. The stencil buffer implementation of shadow volumes is generally considered among the most practical general-purpose real-time shadowing techniques for use on modern 3D graphics hardware. It has been popularised by the video game Doom 3, and a particular variation of the technique used in this game has become known as Carmack's Reverse. == Reflections == Reflection of a scene is drawn as the scene itself transformed and reflected relative to the "mirror" plane, which requires multiple render passes and using of stencil buffer to restrict areas where the current render pass works: Draw the scene excluding mirror areas – for each mirror lock the Z-buffer and color buffer Render visible part of the mirror Depth test is set up so that each pixel is passed to enter the maximum value and always passes for each mirror: Depth test is set so that it passes only if the distance of a pixel is less than the current (default behavior) The matrix transformation is changed to reflect the scene relative to the mirror plane Unlock the Z-buffer and color buffer Draw the scene, but only the part of it that lies between the mirror plane and the camera. In other words, a mirror plane is also a clipping plane Again locks color buffer, depth test is set so that it always passes, reset stencil for the next mirror. == Planar Shadows == While drawing a plane of shadows, there are two dominant problems: The first concerns the problem of deep struggle in case the flat geometry is not awarded on the part covered with the shadow of shadows and outside. See the section that relates to this. Another problem relates to the extent of the shadows outside the area where the plane there. Another problem, which may or may not appear, depending on the technique, the design of more polygons in one part of the shadow, resulting in darker and lighter parts of the same shade. All three problems can be solved geometrically, but because of the possibility that hardware acceleration is directly used, it is a far more elegant implementation using the stencil buffer: 1. Enable lights and the lights 2. Draw a scene without any polygon that should be projected shadows 3. Draw all polygons which should be projected shadows, but without lights. In doing so, the stencil buffer, the pixel of each polygon to be assigned to a specific value for the ground to which they belong. The distance between these values should be at least two, because for each plane to be used two values for two states: in the shadows and bright. 4. Disable any global illumination (to ensure that the next steps will affect only individual selected light) For each plane: For each light: 1. Edit a stencil buffer and only the pixels that carry a specific value for the selected level. Increase the value of all the pixels that are projected objects between the date of a given level and bright. 2. Allow only selected light for him to draw level at which part of her specific value was not changed. == Spatial shadows == Stencil buffer implementation of spatial drawing shadows is any shadow of a geometric body that its volume includes part of the scene that is

    Read more →
  • Europa-Lehrmittel

    Europa-Lehrmittel

    The Verlag Europa-Lehrmittel Nourney, Vollmer GmbH & Co. KG (English: European educational media), based in Haan (district Gruiten) near Düsseldorf, Germany, develops educational media for vocational training and further education as used in vocational schools, universities, companies and further education institutions for industrial-technical, business, social, health as well as gastronomic professions. The contents are delivered in print as well as in digital formats, including offered as apps, simulations, software and through an exam preparation portal. The publisher has its own digital learning platform, the Europathek. General partner is Nourney, Vollmer & Co. GmbH, a school and specialist book publisher. == History == The publishing house was founded in Wuppertal in 1948, when the first books were published. In Eislingen/Fils a construction office was set up to create the technical drawings for the textbooks - today the drawing office of the publisher in Ostfildern. A little over 40 years later, in 1989, a new company building was built in Haan-Gruiten. In 1997, Europa-Lehrmittel acquired the Fachbuchverlag Pfanneberg with its program aimed at gastronomic professions. Further program expansions in vocational training were realized by adding titles of the publishing houses Lau, Gerber, Pluspunkt, parts of the Verlag Handwerk und Technik program and that of the Gildebuchverlag. In 2013, the scientific and technical university titles of Verlag Harri Deutsch were taken over, including the bestselling "Handbook of Mathematics" by Ilya Nikolaevich Bronstein and Konstantin Adolfovic Semendyayev. In addition, Europa-Lehrmittel's first exam apps appeared. In 2017, the publisher introduced its own digital learning platform named Europathek. The Prüfungsdoc (English: Examination Doc) platform, which enables targeted online preparation for exams, went online the same year. In 2018, the titles of the Düsseldorf publishing house SOL for self-organized learning were incorporated into Europa-Lehrmittel's program. == Program == The program meanwhile includes well over 2000 print and digital publications, including specialist titles on metal technology, automotive and electrical engineering (like "Tabellenbuch Metall" (English: Metal Book of Tables)), on business administration, as well as works for the gastronomic profession (e.g. "Der junge Koch" (English: The Young Cook)). Many titles also appear as licensed editions in over 20 different languages on all continents. All contents are presented in an annual catalog, on the website, in schools, in companies, and at trade fairs and congresses. The publisher is a member of the Deutscher Hauswirtschaftsrat. == Digital educational media == Europathek: In addition to digital books, Europathek also provides media packages, additional materials and e-learning contents. The online contents of the 'media shelf' can be used per web browser. There are also software versions and apps for offline use, with the help of which the obtained titles can be viewed after downloading. Prüfungsdoc (English: Examination Doc): Prüfungsdoc offers web-based learning, practice and repetition to prepare for the intermediate and final examinations. This includes simulations of the exams with direct evaluation of the results.

    Read more →
  • Hardware-based encryption

    Hardware-based encryption

    Hardware-based encryption is the use of computer hardware to assist software, or sometimes replace software, in the process of data encryption. Typically, this is implemented as part of the processor's instruction set. For example, the AES encryption algorithm (a modern cipher) can be implemented using the AES instruction set on the ubiquitous x86 architecture. Such instructions also exist on the ARM architecture. However, more unusual systems exist where the cryptography module is separate from the central processor, instead being implemented as a coprocessor, in particular a secure cryptoprocessor or cryptographic accelerator, of which an example is the IBM 4758, or its successor, the IBM 4764. Hardware implementations can be faster and less prone to exploitation than traditional software implementations, and furthermore can be protected against tampering. == History == Prior to the use of computer hardware, cryptography could be performed through various mechanical or electro-mechanical means. An early example is the Scytale used by the Spartans. The Enigma machine was an electro-mechanical system cipher machine notably used by the Germans in World War II. After World War II, purely electronic systems were developed. In 1987 the ABYSS (A Basic Yorktown Security System) project was initiated. The aim of this project was to protect against software piracy. However, the application of computers to cryptography in general dates back to the 1940s and Bletchley Park, where the Colossus computer was used to break the encryption used by German High Command during World War II. The use of computers to encrypt, however, came later. In particular, until the development of the integrated circuit, of which the first was produced in 1960, computers were impractical for encryption, since, in comparison to the portable form factor of the Enigma machine, computers of the era took the space of an entire building. It was only with the development of the microcomputer that computer encryption became feasible, outside of niche applications. The development of the World Wide Web lead to the need for consumers to have access to encryption, as online shopping became prevalent. The key concerns for consumers were security and speed. This led to the eventual inclusion of the key algorithms into processors as a way of both increasing speed and security. == Implementations == === In the instruction set === ==== x86 ==== The X86 architecture, as a CISC (Complex Instruction Set Computer) Architecture, typically implements complex algorithms in hardware. Cryptographic algorithms are no exception. The x86 architecture implements significant components of the AES (Advanced Encryption Standard) algorithm, which can be used by the NSA for Top Secret information. The architecture also includes support for the SHA Hashing Algorithms through the Intel SHA extensions. Whereas AES is a cipher, which is useful for encrypting documents, hashing is used for verification, such as of passwords (see PBKDF2). ==== ARM ==== ARM processors can optionally support Security Extensions. Although ARM is a RISC (Reduced Instruction Set Computer) architecture, there are several optional extensions specified by ARM Holdings. === As a coprocessor === IBM 4758 – The predecessor to the IBM 4764. This includes its own specialised processor, memory and a Random Number Generator. IBM 4764 and IBM 4765, identical except for the connection used. The former uses PCI-X, while the latter uses PCI-e. Both are peripheral devices that plug into the motherboard. === Proliferation === Advanced Micro Devices (AMD) processors are also x86 devices, and have supported the AES instructions since the 2011 Bulldozer processor iteration. Due to the existence of encryption instructions on modern processors provided by both Intel and AMD, the instructions are present on most modern computers. They also exist on many tablets and smartphones due to their implementation in ARM processors. == Advantages == Implementing cryptography in hardware means that part of the processor is dedicated to the task. This can lead to a large increase in speed. In particular, modern processor architectures that support pipelining can often perform other instructions concurrently with the execution of the encryption instruction. Furthermore, hardware can have methods of protecting data from software. Consequently, even if the operating system is compromised, the data may still be secure (see Software Guard Extensions). == Disadvantages == If, however, the hardware implementation is compromised, major issues arise. Malicious software can retrieve the data from the (supposedly) secure hardware – a large class of method used is the timing attack. This is far more problematic to solve than a software bug, even within the operating system. Microsoft regularly deals with security issues through Windows Update. Similarly, regular security updates are released for Mac OS X and Linux, as well as mobile operating systems like iOS, Android, and Windows Phone. However, hardware is a different issue. Sometimes, the issue will be fixable through updates to the processor's microcode (a low level type of software). However, other issues may only be resolvable through replacing the hardware, or a workaround in the operating system which mitigates the performance benefit of the hardware implementation, such as in the Spectre exploit.

    Read more →
  • Signal-to-crosstalk ratio

    Signal-to-crosstalk ratio

    The signal-to-crosstalk ratio at a specified point in a circuit is the ratio of the power of the wanted signal to the power of the unwanted signal from another channel. The signals are adjusted in each channel so that they are of equal power at the zero transmission level point in their respective channels. The signal-to-crosstalk ratio is usually expressed in dB.

    Read more →
  • NRD Cyber Security

    NRD Cyber Security

    NRD Cyber Security is a Lithuanian company that provides cybersecurity solutions, consulting, and other services. The organization specializes in CSIRT and SOC creation, modernization and training. It has helped to establish national and sectorial CSIRTs around the world, including countries, such as Bangladesh, Egypt, Bhutan, Kosovo, Malawi and others. NRD Cyber Security was found in 2013 to provide quality cybersecurity services to nations and organizations. In 2018 it was included in The Deloitte Technology Fast 50 in Europe list. In 2024 it was awarded the #98 place in MSSP Alert Top 250 world's managed security service providers. The company is a member of various cybersecurity organizations, such as Forum of Incident Response and Security Teams (FIRST), The Global Forum on Cyber Expertise (GFCE), Unicrons Lt. It is a strategic partner of The Global Cyber Security Capacity Centre (GCSCC) at University of Oxford.

    Read more →
  • Flat-panel display

    Flat-panel display

    A flat-panel display (FPD) is an electronic display used to display visual content such as text or images. It is present in consumer, medical, transportation, and industrial equipment. Flat-panel displays are thin, lightweight, provide better linearity and are capable of higher resolution and contrast than typical consumer-grade TVs from earlier eras. They are usually less than 10 centimetres (3.9 in) thick. While the highest resolution for consumer-grade CRT televisions is 1080i, many interactive flat panels in the 2020s are capable of 1080p and 4K resolution. In the 2010s, portable consumer electronics such as laptops, mobile phones, and portable cameras have used flat-panel displays since they consume less power and are lightweight. As of 2016, flat-panel displays have almost completely replaced CRT displays. Most 2010s-era flat-panel displays use LCD or light-emitting diode (LED) technologies, sometimes combined. Most LCD screens are back-lit with color filters used to display colors. In many cases, flat-panel displays are combined with touch screen technology, which allows the user to interact with the display in a natural manner. For example, modern smartphone displays often use OLED panels, with capacitive touch screens. Flat-panel displays can be divided into two display device categories: volatile and static. The former requires that pixels be periodically electronically refreshed to retain their state (e.g. liquid-crystal displays (LCD)), and can only show an image when it has power. On the other hand, static flat-panel displays rely on materials whose color states are bistable, such as displays that make use of e-ink technology, and as such retain content even when power is removed. == History == The first engineering proposal for a flat-panel TV was by General Electric in 1954 as a result of its work on radar monitors. The publication of their findings gave all the basics of future flat-panel TVs and monitors. But GE did not continue with the R&D required and never built a working flat panel at that time. The first production flat-panel display was the Aiken tube, developed in the early 1950s and produced in limited numbers in 1958. This saw some use in military systems as a heads up display and as an oscilloscope monitor, but conventional technologies overtook its development. Attempts to commercialize the system for home television use ran into continued problems and the system was never released commercially. Dennis Gabor, better known as the inventor of holography, patented a flat-screen CRT in 1958. This was substantially similar to Aiken's concept, and led to a years-long patent battle. By the time the lawsuits were complete, with Aiken's patent applying in the US and Gabor's in the UK, the commercial aspects had long lapsed, and the two became friends. Around this time, Clive Sinclair came across Gabor's work and began an ultimately unsuccessful decade-long effort to commercialize it. The Philco Predicta featured a relatively flat (for its day) cathode-ray tube setup and would be the first commercially released "flat panel" upon its launch in 1958; the Predicta was a commercial failure. The plasma display panel was invented in 1964 at the University of Illinois, according to The History of Plasma Display Panels. === Liquid-crystal displays (LC displays, or LCDs) === The MOSFET (metal–oxide–semiconductor field-effect transistor, or MOS transistor) was invented by Mohamed M. Atalla and Dawon Kahng at Bell Labs in 1959, and presented in 1960. Building on their work, Paul K. Weimer at RCA developed the thin-film transistor (TFT) in 1962. It was a type of MOSFET distinct from the standard bulk MOSFET. The idea of a TFT-based LCD was conceived by Bernard J. Lechner of RCA Laboratories in 1968. B.J. Lechner, F.J. Marlowe, E.O. Nester and J. Tults demonstrated the concept in 1968 with a dynamic scattering LCD that used standard discrete MOSFETs. The first active-matrix addressed electroluminescent display was made using TFTs by T. Peter Brody's Thin-Film Devices department at Westinghouse Electric Corporation in 1968. In 1973, Brody, J. A. Asars and G. D. Dixon at Westinghouse Research Laboratories demonstrated the first thin-film-transistor liquid-crystal display. Brody and Fang-Chen Luo demonstrated the first flat active-matrix liquid-crystal display (AM LCD) using TFTs in 1974. By 1982, pocket LCD TVs based on LCD technology were developed in Japan. The 2.1-inch Epson ET-10 Epson Elf was the first color LCD pocket TV, released in 1984. In 1988, a Sharp research team led by engineer T. Nagayasu demonstrated a 14-inch full-color LCD, which convinced the electronics industry that LCD would eventually replace CRTs as the standard television display technology. As of 2013, all modern high-resolution and high-quality electronic visual display devices use TFT-based active-matrix displays. === LED displays === The first usable LED display was developed by Hewlett-Packard (HP) and introduced in 1968. It was the result of research and development (R&D) on practical LED technology between 1962 and 1968, by a research team under Howard C. Borden, Gerald P. Pighini, and Mohamed M. Atalla, at HP Associates and HP Labs. In February 1969, they introduced the HP Model 5082-7000 Numeric Indicator. It was the first alphanumeric LED display, and was a revolution in digital display technology, replacing the Nixie tube for numeric displays and becoming the basis for later LED displays. In 1977, James P Mitchell prototyped and later demonstrated what was perhaps the earliest monochromatic flat-panel LED television display. Ching W. Tang and Steven Van Slyke at Eastman Kodak built the first practical organic LED (OLED) device in 1987. In 2003, Hynix produced an organic EL driver capable of lighting in 4,096 colors. In 2004, the Sony Qualia 005 was the first LED-backlit LCD. The Sony XEL-1, released in 2007, was the first OLED television. == Common types == === Liquid-crystal display (LCD) === Field-effect LCDs are lightweight, compact, portable, cheap, more reliable, and easier on the eyes than CRT screens. LCD screens use a thin layer of liquid crystal, a liquid that exhibits crystalline properties. It is sandwiched between two glass plates carrying transparent electrodes. Two polarizing films are placed at each side of the LCD. By generating a controlled electric field between electrodes, various segments or pixels of the liquid crystal can be activated, causing changes in their polarizing properties. These polarizing properties depend on the alignment of the liquid-crystal layer and the specific field-effect used, being either twisted nematic (TN), in-plane switching (IPS) or vertical alignment (VA). Color is produced by applying appropriate color filters (red, green and blue) to the individual subpixels. LC displays are used in various electronics like watches, calculators, mobile phones, TVs, computer monitors and laptops screens etc. === LED-LCD === Most earlier large LCD screens were back-lit using a number of CCFL (cold-cathode fluorescent lamps). However, small pocket size devices almost always used LEDs as their illumination source. With the improvement of LEDs, almost all new displays are now equipped with LED backlight technology. The image is still generated by the LCD layer. === Plasma panel === A plasma display consists of two glass plates separated by a thin gap filled with a gas such as neon. Each of these plates has several parallel electrodes running across it. The electrodes on the two plates are at right angles to each other. A voltage applied between the two electrodes one on each plate causes a small segment of gas at the two electrodes to glow. The glow of gas segments is maintained by a lower voltage that is continuously applied to all electrodes. By 2010, consumer plasma displays had been discontinued by numerous manufacturers. === Electroluminescent panel === In an electroluminescent display, the image is created by applying electrical signals to the plates which make the phosphor glow. === Organic light-emitting diode === An OLED (organic light-emitting diode) is a light-emitting diode (LED) in which the emissive electroluminescent layer is a film of organic compound which emits light in response to an electric current. This layer of organic semiconductor is situated between two electrodes; typically, at least one of these electrodes is transparent. OLEDs are used to create digital displays in devices such as television screens, computer monitors, portable systems such as mobile phones, handheld game consoles and PDAs. === Quantum-dot light-emitting diode === QLED or quantum dot LED is a flat panel display technology introduced by Samsung under this trademark. Other television set manufacturers such as Sony have used the same technology to enhance the backlighting of LCD TVs already in 2013. Quantum dots create their own unique light when illuminated by a light source of shorter wavelength such as blue LEDs. Th

    Read more →
  • Feature detection (web development)

    Feature detection (web development)

    Feature detection (also feature testing) is a technique used in web development for handling differences between runtime environments (typically web browsers or user agents), by programmatically testing for clues that the environment may or may not offer certain functionality. This information is then used to make the application adapt in some way to suit the environment: to make use of certain APIs, or tailor for a better user experience. Its proponents claim it is more reliable and future-proof than other techniques like user agent sniffing and browser-specific CSS hacks. == Techniques == A feature test can take many forms. It is essentially any snippet of code which gives some level of confidence that a required feature is indeed supported. However, in contrast to other techniques, feature detection usually focuses on performing actions which directly relate to the feature to be detected, rather than heuristics. === JavaScript === JavaScript feature detection can inspect the DOM and the local JavaScript environment to test whether browser features or APIs are supported. The simplest technique is to check for the existence of a relevant object or property. For example, the Geolocation API (used for accessing the device's knowledge of its geographical location, possibly obtained from a GPS navigation device) exposes a geolocation property on the navigator object in the DOM; the presence of which implies the Geolocation API is supported: if ('geolocation' in navigator) { // Geolocation API is supported } For a higher level of confidence, some feature tests will attempt to invoke the feature then look for clues that it behaved properly. For example, a test for support for cookies might attempt to set a value as a cookie and then verify it can be read back. === CSS === In CSS, the at-rule @supports introduced in 2015 allows to test if a given feature is supported. For instance the following code activates the declarations only if the user agent supports display: flex: == Undetectables == Some browser features are considered undetectable, because no clues are known to give sufficient confidence that a feature is supported. These are often because of limited information available to the JavaScript environment in the browser; generally features must be exposed via the DOM in some way in order to be detectable using JavaScript. When undetectables are encountered, it is common to turn to user agent sniffing as an alternative mechanism, or to employ defensive coding to minimise the impact if the feature turns out not to be supported. The Modernizr project maintains a record of known undetectables on their wiki.

    Read more →