AI Google Grammar Checker

AI Google Grammar Checker — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

  • Artificial intelligence content detection

    Artificial intelligence content detection

    Artificial intelligence detection software aims to determine whether some content (text, image, video, or audio) was generated using artificial intelligence (AI). This software is often unreliable. == Accuracy issues == Many AI detection tools have been shown to be unreliable in detecting AI-generated text. In a 2023 study conducted by Weber-Wulff et al., researchers evaluated 14 detection tools including Turnitin and GPTZero and found that "all scored below 80% of accuracy and only 5 over 70%." They also found that these tools tend to have a bias for classifying texts more as human than as AI, and that accuracy of these tools worsens upon paraphrasing. === False positives === In AI content detection, a false positive is when human-written work is incorrectly flagged as AI-written. Many AI detection platforms claim to have a minimal level of false positives, with Turnitin claiming a less than 1% false positive rate. However, later research by The Washington Post produced much higher rates of 50%, though they used a smaller sample size. False positives in an academic setting frequently lead to accusations of academic misconduct, which can have serious consequences for a student's academic record. Additionally, studies have shown evidence that many AI detection models are prone to give false positives to work written by people whose first language is not English, and also to neurodivergent people. In June 2023, Janelle Shane wrote that portions of her book You Look Like a Thing and I Love You were flagged as AI-generated. === False negatives === A false negative is a failure to identify documents with AI-written text. False negatives often happen as a result of a detection software's sensitivity level or because evasive techniques were used when generating the work to make it sound more human. False negatives are less of a concern academically, since they aren't likely to lead to accusations and ramifications. Notably, Turnitin stated they have a 15% false negative rate. == Text detection == For text, this is usually done to prevent alleged plagiarism, often by detecting repetition of words as telltale signs that a text was AI-generated (including hallucinations). Detection systems may also rely on stylistic and structural regularities associated with LLM output, such as unusually consistent grammar, formulaic transitions, repeated discourse markers, and recurring rhetorical templates. Some tools are designed less to establish authorship provenance than to flag prose that resembles common LLM-generated style patterns. They are often used by teachers marking their students, usually on an ad hoc basis. Following the release of ChatGPT and similar AI text generative software, many educational establishments have issued policies against the use of AI by students. AI text detection software is also used by those assessing job applicants, as well as online search engines, hiring, online moderation and publishing. Current detectors may sometimes be unreliable and have incorrectly marked work by humans as originating from AI while failing to detect AI-generated work in other instances. MIT Technology Review said that the technology "struggled to pick up ChatGPT-generated text that had been slightly rearranged by humans and obfuscated by a paraphrasing tool". AI text detection software has also been shown to discriminate against non-native speakers of English. Two students from the University of California, Davis, were referred to the university's Office of Student Success and Judicial Affairs (OSSJA) after their professors scanned their essays with positive results; the first with an AI detector called GPTZero, and the second with an AI detector integration in Turnitin. However, following media coverage, and a thorough investigation, the students were cleared of any wrongdoing. In April 2023, Cambridge University and other members of the Russell Group of universities in the United Kingdom opted out of Turnitin's AI text detection tool, after expressing concerns it was unreliable. The University of Texas at Austin opted out of the system six months later. In May 2023, a professor at Texas A&M University–Commerce used ChatGPT to detect whether his students' content was written by it, which ChatGPT said was the case. As such, he threatened to fail the class despite ChatGPT not being able to detect AI-generated writing. No students were prevented from graduating because of the issue, and all but one student (who admitted to using the software) were exonerated from accusations of having used ChatGPT in their content. In July 2023, a paper titled "GPT detectors are biased against non-native English writers" was released, reporting that GPTs discriminate against non-native English authors. The paper compared seven GPT detectors against essays from both non-native English speakers and essays from United States students. The essays from non-native English speakers had an average false positive rate of 61.3%. An article by Thomas Germain, published on Gizmodo in June 2024, reported job losses among freelance writers and journalists due to AI text detection software mistakenly classifying their work as AI-generated. In September 2024, Common Sense Media reported that generative AI detectors had a 20% false positive rate for Black students, compared to 10% of Latino students and 7% of White students. To improve the reliability of AI text detection, researchers have explored digital watermarking techniques. A 2023 paper titled "A Watermark for Large Language Models" presents a method to embed imperceptible watermarks into text generated by large language models (LLMs). This watermarking approach allows content to be flagged as AI-generated with a high level of accuracy, even when text is slightly paraphrased or modified. The technique is designed to be subtle and hard to detect for casual readers, thereby preserving readability, while providing a detectable signal for those employing specialized tools. However, while promising, watermarking faces challenges in remaining robust under adversarial transformations and ensuring compatibility across different LLMs. == Anti text detection == There is software available designed to bypass AI text detection. In practice, evasion may not require specialized bypass tools. Paraphrasing, style editing, and removal of repeated discourse markers can substantially reduce the effectiveness of detectors that rely on recognizable surface patterns. A study published in August 2023 analyzed 20 abstracts from papers published in the Eye Journal, which were then paraphrased using GPT-4.0. The AI-paraphrased abstracts were examined for plagiarism using QueText and for AI-generated content using Originality.AI. The texts were then re-processed through an adversarial software called Undetectable.ai in order to reduce the AI-detection scores. The study found that the AI detection tool, Originality.AI, identified text generated by GPT-4 with a mean accuracy of 91.3%. However, after reprocessing by Undetectable.ai, the detection accuracy of Originality.ai dropped to a mean accuracy of 27.8%. Some experts also believe that techniques like digital watermarking are ineffective because they can be removed or added to trigger false positives. "A Watermark for Large Language Models" paper by Kirchenbauer et al. (2023) also addresses potential vulnerabilities of watermarking techniques. The authors outline a range of adversarial tactics, including text insertion, deletion, and substitution attacks, that could be used to bypass watermark detection. These attacks vary in complexity, from simple paraphrasing to more sophisticated approaches involving tokenization and homoglyph alterations. The study highlights the challenge of maintaining watermark robustness against attackers who may employ automated paraphrasing tools or even specific language model replacements to alter text spans iteratively while retaining semantic similarity. Experimental results show that although such attacks can degrade watermark strength, they also come at the cost of text quality and increased computational resources. == Image, video, and audio detection == Several purported AI image detection software exist, to detect AI-generated images (for example, those originating from Midjourney or DALL-E). They are not completely reliable. Industry analyses have also noted that AI-driven image recognition systems often struggle in real-world environments, where inconsistent lighting, noise and variable visual inputs reduce detection reliability, a challenge highlighted in modern agricultural quality-control research. Others claim to identify video and audio deepfakes, but this technology is also not fully reliable yet either. Despite debate around the efficacy of watermarking, Google DeepMind is actively developing a detection software called SynthID, which works by inserting a digital watermark that is invisible to the human eye into the pixels of an image.

    Read more →
  • Daylight Computer Co.

    Daylight Computer Co.

    Daylight Computer Co. is a Public Benefit Company that designs and manufactures devices that do not emit blue light or flicker. Anjan Katta, the company's founder and CEO, stated that he started the company to reduce his personal eyestrain and the distraction that came with conventional devices. The first device that the company released is the Daylight DC-1, a tablet using a monochrome transflective liquid-crystal display designed for outdoor use, while also being usable indoors with an amber backlight. The company's goal is to create a "healthy computer." == History == In June 2018, Anjan Katta began the process of designing a device that did not emit blue light or flicker. He was inspired by the Kindle stating that he wanted to create a device that was, "an analog object that happens to have digital magical capabilities.” By 2020, he created his first scientific prototype and created the first proof-of-concept prototype in 2021. In the early research and development stages of the device, Katta had spent $300,000 of his own money. Eventually, Katta obtained a $12 million investment from current and former executives of companies such as Oculus, Pinterest, and Dropbox. In 2024, the company held a launch party at the Conservatory of Flowers in Golden Gate Park for the Daylight DC1, the company's first device. The event had roughly 200 attendees. Later that year, Daylight sold out its first run of 5,000 devices. The Daylight DC1 is a 1.2 pound tablet that runs its own operating system, SolOS, based on Android 13. It has a refresh rate of 60 Hz, fast enough to process video. In 2025, the product was demonstrated by Danny Jones on the Joe Rogan Experience. The company has been described by outlets such as Wired and VentureBeat as a "returning computing to hippie ideals" and being a product for "techno-hippies." The company is headquartered in San Francisco, California.

    Read more →
  • Key & See

    Key & See

    Key & See is a variation of the TV Key service that forms part of the open, standards-based interactive TV services platform provided by Miniweb Interactive. Key & See allows viewers to access the interactive TV content made available by broadcasters and channel owners while leaving quarter of their screen tuned to the programme they are already watching Like TV Key, Key & See can be used with interactive TV services on UK satellite TV provider Sky Digital (BSkyB) Key & See works in the same way as a TV Key but the numeric shortcut code is associated with a broadcaster and a particular TV channel or programme. Miniweb Interactive offers commercial brands and broadcasters the chance to utilise TV Key and Key & See technology as part of its interactive TV services platform

    Read more →
  • NexDock

    NexDock

    NexDock is a series of lapdock devices (containing a laptop screen, keyboard, trackpad, and battery connected to a phone or other device) sold by Nex Computer LLC. The product can be used with mobile desktop environments, including Samsung DeX and the former Windows Continuum. Critical reception for the series has been mixed, with reviewers praising the concept's utility for mobile productivity while noting hardware limitations and its niche appeal. == History == The first NexDock was introduced in 2016 through a successful Indiegogo campaign. Its development coincided with interest in smartphone-powered desktop interfaces, and it was marketed as a companion for Windows 10 Mobile's Continuum feature. Subsequent models, often launched via Kickstarter, added features like higher-resolution displays, touchscreens, and convertible hinges to adapt to the growing capabilities of smartphones. == Models == === NexDock (Original, 2016) === The first model featured a 14.1-inch 1366x768 display and connected primarily via a mini HDMI port. === NexDock 2 (2019) === This model introduced a 13.3-inch 1080p IPS display and a USB-C port, improvements aimed at better supporting platforms like Samsung DeX. === NexDock Touch (2020) === A touchscreen was added to the 13.3-inch display, allowing for more direct interaction with the connected device's operating system. === NexDock 360 (2021) === This version incorporated a 360-degree hinge, allowing the device to be used in laptop, tablet, tent, or stand modes. === NexDock Wireless (2023) === Wireless display connectivity was the key feature of this model, offering a cable-free connection to compatible phones and computers. === NexDock XL (2023) === The screen size was increased to 15.6 inches. It retained the 360-degree hinge and also offered a version with wireless charging for a connected phone. == Reception == Reviews of NexDock products have been mixed, generally praising the concept while pointing out execution flaws. The devices are often lauded for their utility with Samsung DeX, turning a high-end Samsung phone into a viable portable workstation. A review of the NexDock 2 from ZDNet concluded it was a "great companion for the modern road warrior," and Digital Trends called the original a "no-brainer shell" for expanding a phone's capability. However, reviewers have consistently highlighted hardware limitations. In its review of the NexDock Touch, TechRadar stated that while it was a "compelling package for a very specific niche," the "trackpad and keyboard are a bit of a letdown and the screen could be brighter." This sentiment was echoed in other reviews, with criticism often aimed at the trackpad's performance and feel. A review of the NexDock 2 from Android Authority described the experience as being "janky at times," concluding that the device "delivers on its promise — sort of." A common point across many reviews is that the overall performance is entirely dependent on the power of the connected phone, and the experience is often best suited for light productivity tasks rather than replacing a dedicated laptop.

    Read more →
  • Joox

    Joox

    Joox (stylised in all caps) is a music streaming service owned by Tencent, launched in January 2015. Joox is the biggest music streaming app in Asian markets such as Hong Kong, Macau, Indonesia, Malaysia, Myanmar, Thailand and also in South Africa before it was shut down in early 2022. Joox is a freemium service, providing most of its songs free, while some songs are only available for premium users, offered via paid subscriptions or by doing different tasks offered. In 2017, Joox launched their service in their first non-Asian market, South Africa, which for an unknown reason shut down five years later. The service now accounts for more than 50% of all music streaming app downloads in their Asian markets. The number of music-streaming users in Hong Kong, Macau, Malaysia, Thailand, Myanmar and Indonesia was expected to reach 87 million by 2020. == Background == Before the emergence of Joox, Tencent owned QQ Music, one of the largest music streaming and download service in China. In 2015, they introduced Joox as their expansion of music services to overseas market instead of mainland China, starting first in Hong Kong. Instead of providing free services by playing audio ads to users like Spotify, another major music service, Joox focused on banner ads, splash ads and other advertising methods such as category playlists and in-app skins. They claimed it as a success. Joox offered their premium VIP access to DStv subscribers free of charge. DStv is the sister company to Tencent and is the primary pay-TV provider in South Africa. In November 2021, it was announced that Joox will stop streaming in South Africa in March 2022.

    Read more →
  • Acquisition of DirecTV by AT&T

    Acquisition of DirecTV by AT&T

    AT&T Inc. announced an agreement with the DirecTV Group on May 18, 2014, to acquire the company for $48.5 billion in a joint cash-stock transaction and assumed debts of $18.6 billion for a total offer of $67.1 billion. Due to stalling growth in the wireless sector, AT&T began diversifying into mass media to expand its consumer offerings. After regulatory agencies approved the purchase on July 24, 2015, AT&T briefly became the largest Pay-TV provider. DirecTV was brought under AT&T's communication segment and DirecTV Now was launched on November 30, 2016, as an alternative to cord-cutting. In the years following the purchase, DirecTV lost millions of subscribers across its satellite and streaming services and by 2019, calls grew for AT&T to divest itself off the business. Initially, AT&T rejected these calls and defended the acquisition, but by February 2021, it reached a deal with TPG Inc. to transfer ownership of DirecTV. Under the terms of the agreement, AT&T would retain a 70% majority stake in DirecTV but would no longer oversee its daily operations. The deal was finalized by August 2, 2021, with AT&T receiving $7.1 billion. By July 3, 2025, AT&T sold its majority stake to TPG, ending any ties of involvement. == Background and Development == === AT&T's history === The company to bear the name "AT&T" was founded on March 3, 1885, as American Telephone and Telegraph Company (or AT&T Corporation) by Theodore Newton Vail as a long-distance subsidiary of the Bell Telephone Company. By December 1899, the Bell Telephone's assets were transferred to AT&T, with the latter gaining control of the Bell System, a regional network of local telecom companies. Theodore Vail became AT&T's President in 1907 and under his leadership, AT&T gained a monopoly over the telephone sector in the United States. This near century dominance earned AT&T the nickname of "Ma Bell." In 1974, the U.S. Department of Justice sued AT&T on accounts of antitrust violations. AT&T challenged the lawsuit, but in 1982, it reached a settlement with the DOJ to break apart its Bell System monopoly into seven regional companies. On January 1, 1984, the Bell System came to an end and led to a reshaped telecom industry. One of these regional companies, Southwestern Bell, emerged as the smallest, but after the passage of the 1996 Telecom Act, deregulated telecom rules allowed SBC to become a major telecom company. AT&T briefly became the largest cable and broadband company by the end of the 20th Century, but later deconsolidated to exit those industries. In 2005, SBC acquired its former parent, AT&T, and took on its branding as AT&T Inc, while retaining its previous business history. The newly reincorporated AT&T acquired BellSouth in 2006 and reconstituted much of its former Bell System. === DirecTV's history === == Acquisition Timeline == == Managing DirecTV == == Divestment and Spinoff ==

    Read more →
  • X2 transceiver

    X2 transceiver

    The X2 transceiver format is a 10 gigabit per second modular fiber optic interface intended for use in routers, switches and optical transport platforms. It is an early generation 10 gigabit interface related to the similar XENPAK and XPAK formats. X2 may be used with 10 Gigabit Ethernet or OC-192/STM-64 speed SDH/SONET equipment. X2 modules are smaller and consume less power than first-generation XENPAK modules, but larger and consume more energy than the newer XFP transceiver standard and SFP+ standards. As of 2016 this format is relatively uncommon and has been replaced by 10 Gbit/s SFP+ in most new equipment.

    Read more →
  • MADI

    MADI

    Multichannel Audio Digital Interface (MADI) standardized as AES10 by the Audio Engineering Society (AES) defines the data format and electrical characteristics of an interface that carries multiple channels of digital audio. The AES first documented the MADI standard in AES10-1991 and updated it in AES10-2003 and AES10-2008. The MADI standard includes a bit-level description and has features in common with the two-channel AES3 interface. MADI supports serial digital transmission over coaxial cable or fibre-optic lines of 28, 56, 32, or 64 channels; and sampling rates to 96 kHz and beyond with an audio bit depth of up to 24 bits per channel. Like AES3 and ADAT Lightpipe, it is a unidirectional interface from one sender to one receiver. == Development and applications == MADI was developed by AMS Neve, Solid State Logic, Sony and Mitsubishi and is widely used in the audio industry, especially in the professional audio sector. It provides advantages over other audio digital interface protocols and standards such as AES3, ADAT Lightpipe, TDIF (Tascam Digital Interface), and S/PDIF (Sony/Philips Digital Interface). These advantages include: Support for a greater number of channels per line Use of coaxial and optical fiber media that support transmission of audio signals over 100 meters, up to 3000 meters over multi-mode and 40,000 meters over single-mode optical fiber The original specification (AES10-1991) defined the MADI link as a 56-channel transport for linking large-format mixing consoles to digital multitrack recording devices. Large broadcast studios also adopted it for routing multi-channel audio throughout their facilities. The 2003 revision (AES10-2003) adds a 64-channel capability by removing varispeed operation and supports 96 kHz sampling frequency with reduced channel capacity. The latest AES10-2008 standard includes minor clarifications and updates to correspond to the current AES3 standard. Audio over Ethernet of various types is the primary alternative to MADI for transport of many channels of professional digital audio. == Transmission format == MADI links use a transmission format similar to Fiber Distributed Data Interface (FDDI) networking. Since MADI is most often transmitted on copper links via 75-ohm coaxial cables, it more closely compares to the FDDI specification for copper-based links, called CDDI. AES10-2003 recommends using BNC connectors with coaxial cables and SC connectors with optic fibers. MADI over fibre can support a range of up to 2 km. The basic data rate is 100 Mbit/s of data using 4B5B encoding to produce a 125 MHz physical baud rate. Unlike AES3, this clock is not synchronized to the audio sample rate, and the audio data payload is padded using JK sync symbols. Sync symbols may be inserted at any subframe boundary, and must occur at least once per frame. Though the standard disassociates the transmission clock from the audio sample rate, and thus requires a separate word clock connection to maintain synchronization, some vendors do give the option of locking to parts of the transmission timing information for purposes of deriving a word clock. The audio data is almost identical to the AES3 payload, though with more channels. Rather than letters, MADI assigns channel numbers from 0–63. Frame synchronization is provided by sync symbols outside the data itself, rather than an embedded preamble sequence, and the first four time slots of each sub-channel are encoded as normal data, used for sub-channel identification: Bit 0: Set to 1 to mark channel 0, the first channel in each frame Bit 1: Set to 1 to indicate that this channel is active (contains interesting data) Bit 2: notA/B channel marker, used to mark left (0) and right (1) channels. Generally, even channels are A and odd channels are B. Bit 3: Set to 1 to mark the beginning of a 192-sample data block == Sampling frequency == The original AES10-1991 specification allowed 56 channels at sample rates from 32 to 48 kHz with an additional vari-speed range of ± 12.5%. This leads to a total range of 28 to 54 kHz. At the highest frequency, this produces a total of 56 × 32 × 54 = 96768 kbit/s, leaving 3.232% of the channel for synchronization marks and transmit clock error. The 2003 revision specifies different relations between sampling frequency and number of channels. 32 kHz to 48 kHz ± 12.5%, 56 channels; 32 kHz to 48 kHz nominal, 64 channels; 64 kHz to 96 kHz ± 12.5%, 28 channels. With a 48 kHz sampling frequency, 64 channels take 64 × 32 × 48000 = 98.304 Mbit/s. Adding the minimum 8 × 58 kbit/s of framing produces 98688 bit/s, leaving 1.312% free for timing variation and other overhead. Both versions of the standard accommodate higher sampling frequencies (for example, 96 kHz or 192 kHz) by using two or more channels per audio sample on the link.

    Read more →
  • Mark V. Shaney

    Mark V. Shaney

    Mark V. Shaney is a synthetic Usenet user whose postings in the net.singles newsgroups were generated by Markov chain techniques, based on text from other postings. The username is a play on the words "Markov chain". Many readers were fooled into thinking that the quirky, sometimes uncannily topical posts were written by a real person. The system was designed by Rob Pike with coding by Bruce Ellis. Don P. Mitchell wrote the Markov chain code, initially demonstrating it to Pike and Ellis using the Tao Te Ching as a basis. They chose to apply it to the net.singles netnews group. The program is fairly simple. It ingests the sample text (the Tao Te Ching, or the posts of a Usenet group) and creates a massive list of every sequence of three successive words (triplet) which occurs in the text. It then chooses two words at random, and looks for a word which follows those two in one of the triplets in its massive list. If there is more than one, it picks at random (identical triplets count separately, so a sequence which occurs twice is twice as likely to be picked as one which only occurs once). It then adds that word to the generated text. Then, in the same way, it picks a triplet that starts with the second and third words in the generated text, and that gives a fourth word. It adds the fourth word, then repeats with the third and fourth words, and so on. This algorithm is called a third-order Markov chain (because it uses sequences of three words). == Examples == A classic example, from 1984, originally sent as a mail message, later posted to net.singles is reproduced here: >From mvs Fri Nov 16 17:11 EST 1984 remote from alice It looks like Reagan is going to say? Ummm... Oh yes, I was looking for. I'm so glad I remembered it. Yeah, what I have wondered if I had committed a crime. Don't eat with your assessment of Reagon and Mondale. Up your nose with a guy from a firm that specifically researches the teen-age market. As a friend of mine would say, "It really doesn't matter"... It looks like Reagan is holding back the arms of the American eating public have changed dramatically, and it got pretty boring after about 300 games. People, having a much larger number of varieties, and are very different from what one can find in Chinatowns across the country (things like pork buns, steamed dumplings, etc.) They can be cheap, being sold for around 30 to 75 cents apiece (depending on size), are generally not greasy, can be adequately explained by stupidity. Singles have felt insecure since we came down from the Conservative world at large. But Chuqui is the way it happened and the prices are VERY reasonable. Can anyone think of myself as a third sex. Yes, I am expected to have. People often get used to me knowing these things and then a cover is placed over all of them. Along the side of the $$ are spent by (or at least for ) the girls. You can't settle the issue. It seems I've forgotten what it is, but I don't. I know about violence against women, and I really doubt they will ever join together into a large number of jokes. It showed Adam, just after being created. He has a modem and an autodial routine. He calls my number 1440 times a day. So I will conclude by saying that I can well understand that she might soon have the time, it makes sense, again, to get the gist of my argument, I was in that (though it's a Republican administration). _-_-_-_-Mark Other quotations from Mark's Usenet posts are: "I spent an interesting evening recently with a grain of salt." (Alternatively reported as "While at a conference a few weeks back, I spent an interesting evening with a grain of salt.") "I hope that there are sour apples in every bushel." (see also sour grapes) == History == In The Usenet Handbook Mark Harrison writes that after September 1981, students joined Usenet en masse, "creating the USENET we know today: endless dumb questions, endless idiots posing as savants, and (of course) endless victims for practical jokes." In December, Rob Pike created the netnews group net.suicide as prank, "a forum for bad jokes". Some users thought it was a legitimate forum, some discussed "riding motorcycles without helmets". At first, most posters were "real people", but soon "characters" began posting. Pike created a "vicious" character named Bimmler. At its peak, net.suicide had ten frequent posters; nine were "known to be characters." But ultimately, Pike deleted the newsgroup because it was too much work to maintain; Bimmler messages were created "by hand". The "obvious alternative" was software, running on a Bell Labs computer created by Bruce Ellis, based on the Markov code by Don Mitchell, which became the online character Mark V. Shaney. Kernighan and Pike listed Mark V. Shaney in the acknowledgements in The Practice of Programming, noting its roots in Mitchell's markov, which, adapted as shaney, was used for "humorous deconstructionist activities" in the 1980s. Dewdney pointed out "perhaps Mark V. Shaney's magnum opus: a 20-page commentary on the deconstructionist philosophy of Jean Baudrillard" directed by Pike, with assistance from Henry S. Baird and Catherine Richards, to be distributed by email. The piece was based on Jean Baudrillard's "The Precession of Simulacra", published in Simulacra and Simulation (1981). == Reception == The program was discussed by A. K. Dewdney in the Scientific American "Computer Recreations" column in 1989, by Penn Jillette in his PC Computing column in 1991, and in several books, including the Usenet Handbook, Bots: the Origin of New Species, Hippo Eats Dwarf: A Field Guide to Hoaxes and Other B.S., and non-computer-related journals such as Texas Studies in Literature and Language. Dewdney wrote about the program's output, "The overall impression is not unlike what remains in the brain of an inattentive student after a late-night study session. Indeed, after reading the output of Mark V. Shaney, I find ordinary writing almost equally strange and incomprehensible!" He noted the reactions of newsgroup users, who have "shuddered at Mark V. Shaney's reflections, some with rage and others with laughter:" The opinions of the new net.singles correspondent drew mixed reviews. Serious users of the bulletin board's services sensed satire. Outraged, they urged that someone "pull the plug" on Mark V. Shaney's monstrous rantings. Others inquired almost admiringly whether the program was a secret artificial intelligence project that was being tested in a human conversational environment. A few may even have thought that Mark V. Shaney was a real person, a tortured schizophrenic desperately seeking a like-minded companion. Concluding, Dewdney wrote, "If the purpose of computer prose is to fool people into thinking that it was written by a sane person, Mark V. Shaney probably falls short." A 2012 article in Observer compared Mark V. Shaney's "strangely beautiful" postings to the Horse_ebooks account on Twitter and music reviews at Pitchfork, saying that "this mash-up of gibberish and human sentiment" is what "made Mark V. Shaney so endlessly fascinating".

    Read more →
  • W3C Device Description Working Group

    W3C Device Description Working Group

    The W3C Device Description Working Group (DDWG), operating as part of the World Wide Web Consortium (W3C) Mobile Web Initiative (MWI), was chartered to "foster the provision and access to device descriptions that can be used in support of Web-enabled applications that provide an appropriate user experience on mobile devices." Mobile devices exhibit the greatest diversity of capabilities, and therefore present the greatest challenge to content adaptation technologies. The group published several documents, including a list of requirements for an interface to a Device Description Repository (DDR) and a standard interface meeting those requirements. The group was rechartered in 2006 to work in public towards the development of the Application Programming Interface (API) for a DDR. Early in 2007, the group launched a wiki and a blog to add to the public mailing list. The group subsequently published a formal vocabulary of core device properties, and an API called the DDR Simple API, which became a W3C Recommendation in December 2008. The group closed at the end of 2008, but with the intention of maintaining the Web pages, blog and wiki through W3C volunteer effort. == Publications == The DDWG published several W3C Working Group Notes and one W3C Recommendation. A W3C WG Note that articulates what the W3C and other organizations are doing or have already done with regard to device information. This document suggests an environment in which these technologies work together to meet the goals of content adaptation. The completed document was published on 31 October 2007. A W3C WG Note describing the ecosystem surrounding creation, maintenance and use of device descriptions. The completed document was published on 31 October 2007. A W3C WG Note describing a set of requirements for a reference repository of device descriptions. The completed document was published on 17 December 2007. A W3C WG Note describing a process to manage contributions to an initial core vocabulary, identification of key device properties, a formal initial core vocabulary and the identification of a maintainer for the core vocabulary. The details were contained in the Working Group Note describing the DDWG Core Vocabulary published on 14 April 2008. A W3C WG Note defining useful grouping and structure patterns in device descriptions. The Device Description Structures document was published as a Working Draft on 5 December 2008. The intention is that this document will be future input to other W3C groups. A W3C Recommendation defining a language-neutral programming interface to a Device Description Repository. The DDR Simple API was published on 5 December 2008. There is the possibility of future publications on the DDWG wiki describing implementations of the API in various languages, including Java, IDL, WSDL, C# etc. Much of the DDWG's material was developed in public via the DDWG Wiki and through their public mailing lists.

    Read more →
  • FreePBX Distro

    FreePBX Distro

    The FreePBX Distro was a freeware unified communications software system that consisted of FreePBX, a graphical user interface (GUI) for configuring, controlling and managing Asterisk PBX software. The FreePBX Distro included packages that offer VoIP, PBX, Fax, IVR, voice-mail and email functions. The FreePBX Distro Linux distribution was based on CentOS, which maintains binary compatibility with Red Hat Enterprise Linux. FreePBX has contributed to the popularity of Asterisk. As a result of CentOS Linux being discontinued and the last version of CentOS 7 going out of support on June 30, 2024, FreePBX 17 has moved over to and is supported on Debian Linux. FreePBX will no longer be providing a pre-configured FreePBX Distro, but will provide a script to install FreePBX on a fresh install of Debian Linux. In-place migration will not be possible, but will be possible by restoring a backup on the new version from the previous version. As FreePBX 16 will be supported until the release of FreePBX 18, FreePBX on this distribution will still work and be supported, however, there will be no further support for the underlying operating system. == Installation == The Official FreePBX Distro is installed from a ISO image available by web download, that includes the system CentOS, Asterisk, FreePBX GUI and assorted dependencies. This can then either be burned to DVD or written to a USB stick for installation == Support for telephony hardware == The FreePBX Distro has built-in support for cards from multiple vendors, including Digium, OpenVox, Alto, Rhino Equipment, Xorcom and Sangoma. The FreePBX Distro supports a large number of phone models via open-source modules. Supported VoIP phone manufacturers include Algo, AND, AudioCodes, Cisco, Cyberdata, Digium, Grandstream, Mitel/Aastra, Nortel/Avaya, Panasonic, Polycom, Sangoma, Snom, Xorcom and Yealink. == Development == FreePBX made its debut in 2004 as the AMP project (Asterisk Management Portal). The FreePBX Distro was released in 2011 as an turnkey solution for building a PBX using Asterisk, CentOS and FreePBX. FreePBX has over 1 million active production PBXs and over 20,000 new systems added each month. The core telephony engine is Asterisk, as configured by the Open Source FreePBX GUI. The last stable release is FreePBX Distro Stable SNG7-PBX16-64bit-2302-1 based on these main components: FreePBX 16 CentOS 7.8 Asterisk 16, 18, 19 (20 supported by upgrade once installed)

    Read more →
  • CloudLibrary

    CloudLibrary

    CloudLibrary (stylized as "cloudLibrary") is a cloud-based software system through which libraries lend electronic books; it is also the name of the app that users download to access the e-books. CloudLibrary was created in 2011 by 3M as part of its library systems unit as a competitor to OverDrive, Inc.; in 2015 3M sold the North American part of that unit to Bibliotheca Group GmbH, a company founded in 2011 that was funded by One Equity Partners Capital Advisors, a division of JP Morgan Chase. By 2019, Bibliotecha had tried, unsuccessfully, to negotiate with Amazon to add Kindle-ebook compatibility to cloudLibrary - something that, as of then, Amazon had only made available to Overdrive. In that year, cloudLibrary, along with hoopla offered by Midwest Tape, ODILO, and Baker & Taylor’s Axis 360, were the main competitors to the Overdrive and Libby apps offered by OverDrive, Inc. in the library e-book market. In April 2024, Bibliotheca sold cloudLibrary to the nonprofit cooperative OCLC. By that time, cloudLibrary was used by around 500 libraries in around 20 countries in around 50 languages, and was used to lend audiobooks, digital magazines, newspapers, and comics, and streaming media, along with e-books.

    Read more →
  • Tango (platform)

    Tango (platform)

    Tango (named Project Tango while in testing) was an augmented reality computing platform, developed and authored by the Advanced Technology and Projects (ATAP), a skunkworks division of Google. It used computer vision to enable mobile devices, such as smartphones and tablets, to detect their position relative to the world around them without using GPS or other external signals. This allowed application developers to create user experiences that include indoor navigation, 3D mapping, physical space measurement, environmental recognition, augmented reality, and windows into a virtual world. The first product to emerge from ATAP, Tango was developed by a team led by computer scientist Johnny Lee, a core contributor to Microsoft's Kinect. In an interview in June 2015, Lee said, "We're developing the hardware and software technologies to help everything and everyone understand precisely where they are, anywhere." Google produced two devices to demonstrate the Tango technology: the Peanut phone and the Yellowstone 7-inch tablet. More than 3,000 of these devices had been sold as of June 2015, chiefly to researchers and software developers interested in building applications for the platform. In the summer of 2015, Qualcomm and Intel both announced that they were developing Tango reference devices as models for device manufacturers who use their mobile chipsets. At CES, in January 2016, Google announced a partnership with Lenovo to release a consumer smartphone during the summer of 2016 to feature Tango technology marketed at consumers, noting a less than $500 price-point and a small form factor below 6.5 inches. At the same time, both companies also announced an application incubator to get applications developed to be on the device on launch. On 15 December 2017, Google announced that they would be ending support for Tango on March 1, 2018, in favor of ARCore. == Overview == Tango was different from other contemporary 3D-sensing computer vision products, in that it was designed to run on a standalone mobile phone or tablet and was chiefly concerned with determining the device's position and orientation within the environment. The software worked by integrating three types of functionality: Motion-tracking: using visual features of the environment, in combination with accelerometer and gyroscope data, to closely track the device's movements in space Area learning: storing environment data in a map that can be re-used later, shared with other Tango devices, and enhanced with metadata such as notes, instructions, or points of interest Depth perception: detecting distances, sizes, and surfaces in the environment Together, these generate data about the device in "six degrees of freedom" (3 axes of orientation plus 3 axes of position) and detailed three-dimensional information about the environment. Project Tango was also the first project to graduate from Google X in 2012 Applications on mobile devices use Tango's C and Java APIs to access this data in real time. In addition, an API was also provided for integrating Tango with the Unity game engine; this enabled the conversion or creation of games that allow the user to interact and navigate in the game space by moving and rotating a Tango device in real space. These APIs were documented on the Google developer website. == Applications == Tango enabled apps to track a device's position and orientation within a detailed 3D environment, and to recognize known environments. This allowed the creations of applications such as in-store navigation, visual measurement and mapping utilities, presentation and design tools, and a variety of immersive games. At Augmented World Expo 2015, Johnny Lee demonstrated a construction game that builds a virtual structure in real space, an AR showroom app that allows users to view a full-size virtual automobile and customize its features, a hybrid Nerf gun with mounted Tango screen for dodging and shooting AR monsters superimposed on reality, and a multiplayer VR app that lets multiple players converse in a virtual space where their avatar movements match their real-life movements. Tango apps are distributed through Play. Google has encouraged the development of more apps with hackathons, an app contest, and promotional discounts on the development tablet. == Devices == As a platform for software developers and a model for device manufacturers, Google created two Tango devices. === The Peanut phone === "Peanut" was the first production Tango device, released in the first quarter of 2014. It was a small Android phone with a Qualcomm MSM8974 quad-core processor and additional special hardware including a fisheye motion camera, "RGB-IR" camera for color image and infrared depth detection, and Movidius Vision processing units. A high-performance accelerometer and gyroscope were added after testing several competing models in the MARS lab at the University of Minnesota. Several hundred Peanut devices were distributed to early-access partners including university researchers in computer vision and robotics, as well as application developers and technology startups. Google stopped supporting the Peanut device in September 2015, as by then the Tango software stack had evolved beyond the versions of Android that run on the device. === The Yellowstone tablet === "Yellowstone" was a 7-inch tablet with full Tango functionality, released in June 2014, and sold as the Project Tango Tablet Development Kit. It featured a 2.3 GHz quad-core Nvidia Tegra K1 processor, 128GB flash memory, 1920x1200-pixel touchscreen, 4MP color camera, fisheye-lens (motion-tracking) camera, an IR projector with RGB-IR camera for integrated depth sensing, and 4G LTE connectivity. As of May 27, 2017, the Tango tablet is considered officially unsupported by Google. ==== Testing by NASA ==== In May 2014, two Peanut phones were delivered to the International Space Station to be part of a NASA project to develop autonomous robots that navigate in a variety of environments, including outer space. The soccer-ball-sized, 18-sided polyhedral SPHERES robots were developed at the NASA Ames Research Center, adjacent to the Google campus in Mountain View, California. Andres Martinez, SPHERES manager at NASA, said "We are researching how effective [Tango's] vision-based navigation abilities are for performing localization and navigation of a mobile free flyer on ISS. === Intel RealSense smartphone === Announced at Intel's Developer Forum in August 2015, and offered to public through a Developer Kit since January 2016. It incorporated a RealSense ZR300 camera which had optical features required for Tango, such as the fisheye camera. === Lenovo Phab 2 Pro === Lenovo Phab 2 Pro was the first commercial smartphone with the Tango Technology, the device was announced at the beginning of 2016, launched in August, and available for purchase in the US in November. The Phab 2 Pro had a 6.4 inch screen, a Snapdragon 652 processor, and 64 GB of internal storage, with a rear facing 16 Megapixels camera and 8 MP front camera. === Asus Zenfone AR === Asus Zenfone AR, announced at CES 2017, was the second commercial smartphone with the Tango Technology. It ran Tango AR & Daydream VR on Snapdragon 821, with 6GB or 8GB of RAM and 128 or 256GB of internal memory depending on the configuration.

    Read more →
  • Photonically Optimized Embedded Microprocessors

    Photonically Optimized Embedded Microprocessors

    The Photonically Optimized Embedded Microprocessors (POEM) is DARPA program. It should demonstrate photonic technologies that can be integrated within embedded microprocessors and enable energy-efficient high-capacity communications between the microprocessor and DRAM. For realizing POEM technology CMOS and DRAM-compatible photonic links should operate at high bit-rates with very low power dissipation. == Current research == Currently research in this field is at University of Colorado, Berkley University, and Nanophotonic Systems Laboratory ( Ultra-Efficient CMOS-Compatible Grating Coupler Design).

    Read more →
  • Asynchronous module definition

    Asynchronous module definition

    Asynchronous module definition (AMD) is a specification for the programming language JavaScript. It defines an application programming interface (API) that defines code modules and their dependencies, and loads them asynchronously if desired. Implementations of AMD provide the following benefits: Website performance improvements. AMD implementations load smaller JavaScript files, and then only when they are needed. Fewer page errors. AMD implementations allow developers to define dependencies that must load before a module is executed, so the module does not try to use outside code that is not available yet.... In addition to loading multiple JavaScript files at runtime, AMD implementations allow developers to encapsulate code in smaller, more logically-organized files, in a way similar to other programming languages such as Java. For production and deployment, developers can concatenate and minify JavaScript modules based on an AMD API into one file, the same as traditional JavaScript. AMD provides some CommonJS interoperability. It allows for using a similar exports and require() interface in the code, although its own define() interface is more basal and preferred. The AMD specification is implemented by Dojo Toolkit, RequireJS, and other libraries.

    Read more →