AI Grammar And Vocabulary Checker

AI Grammar And Vocabulary Checker — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

Network eavesdropping

Network eavesdropping, also known as eavesdropping attack, sniffing attack, or snooping attack, is a method that retrieves user information through the internet. This attack happens on electronic devices like computers and smartphones. This network attack typically happens under the usage of unsecured networks, such as public wifi connections or shared electronic devices. Eavesdropping attacks through the network is considered one of the most urgent threats in industries that rely on collecting and storing data. Internet users use eavesdropping via the Internet to improve information security. A typical network eavesdropper may be called a Black-hat hacker and is considered a low-level hacker as it is simple to network eavesdrop successfully. The threat of network eavesdroppers is a growing concern. Research and discussions are brought up in the public's eye, for instance, types of eavesdropping, open-source tools, and commercial tools to prevent eavesdropping. Models against network eavesdropping attempts are built and developed as privacy is increasingly valued. Sections on cases of successful network eavesdropping attempts and its laws and policies in the National Security Agency are mentioned. Some laws include the Electronic Communications Privacy Act and the Foreign Intelligence Surveillance Act. == Types of attacks == Types of network eavesdropping include intervening in the process of decryption of messages on communication systems, attempting to access documents stored in a network system, and listening on electronic devices. Types include electronic performance monitoring and control systems, keystroke logging, man-in-the-middle attacks, observing exit nodes on a network, and Skype & Type. === Electronic performance monitoring and control systems (EPMCSs) === Electronic performance monitoring and control systems are used by employees or companies and organizations to collect, store, analyze, and report actions or performances of employers when they are working. The beginning of this system is used to increase the efficiency of workers, but instances of unintentional eavesdropping can occur, for example, when employees' casual phone calls or conversations would be recorded. === Keystroke logging === Keystroke logging is a program that can oversee the writing process of the user. It can be used to analyze the user's typing activities, as keystroke logging provides detailed information on activities like typing speed, pausing, deletion of texts, and more behaviors. By monitoring the activities and sounds of the keyboard strikes, the message typed by the user can be translated. Although keystroke logging systems do not explain reasons for pauses or deletion of texts, it allows attackers to analyze text information. Keystroke logging can also be used with eye-tracking devices which monitor the movements of the user's eyes to determine patterns of the user's typing actions which can be used to explain the reasons for pauses or deletion of texts. === Man-in-the-middle attack (MitM) === A Man-in-the-middle attack is an active eavesdropping method that intrudes on the network system. It can retrieve and alter the information sent between two parties without anyone noticing. The attacker hijacks the communication systems and gains control over the transport of data, but cannot insert voice messages that sound or act like the actual users. Attackers also create independent communications through the system with the users acting as if the conversation between users is private. The "man-in-the-middle" can also be referred to as lurkers in a social context. A lurker is a person who rarely or never posts anything online, but the person stays online and observes other users' actions. Lurking can be valuable as it lets people gain knowledge from other users. However, like eavesdropping, lurking into other users' private information violates privacy and social norms. === Observing exit nodes === Distributed networks including communication networks are usually designed so that nodes can enter and exit the network freely. However, this poses a danger in which attacks can easily access the system and may cause serious consequences, for example, leakage of the user's phone number or credit card number. In many anonymous network pathways, the last node before exiting the network may contain actual information sent by users. Tor exit nodes are an example. Tor is an anonymous communication system that allows users to hide their IP addresses. It also has layers of encryption that protect information sent between users from eavesdropping attempts trying to observe the network traffic. However, Tor exit nodes are used to eavesdrop at the end of the network traffic. The last node in the network path flowing through the traffic, for instance, Tor exit nodes, can acquire original information or messages that were transmitted between different users. === Skype & Type (S&T) === Skype & Type (S&T) is a new keyboard acoustic eavesdropping attack that takes advantage of Voice-over IP (VoIP). S&T is practical and can be used in many applications in the real world, as it does not require attackers to be close to the victim and it can work with only some leaked keystrokes instead of every keystroke. With some knowledge of the victim's typing patterns, attackers can gain a 91.7% accuracy typed by the victim. Different recording devices including laptop microphones, smartphones, and headset microphones can be used for attackers to eavesdrop on the victim's style and speed of typing. It is especially dangerous when attackers know what language the victim is typing in. == Tools to prevent eavesdropping attacks == Computer programs where the source code of the system is shared with the public for free or for commercial use can be used to prevent network eavesdropping. They are often modified to cater to different network systems, and the tools are specific in what task it performs. In this case, Advanced Encryption Standard-256, Bro, Chaosreader, CommView, Firewalls, Security Agencies, Snort, Tcptrace, and Wireshark are tools that address network security and network eavesdropping. === Advanced encryption standard-256 (AES-256) === It is a cipher block chaining (CBC) mode for ciphered messages and hash-based message codes. The AES-256 contains 256 keys for identifying the actual user, and it represents the standard used for securing many layers on the internet. AES-256 is used by Zoom Phone apps that help encrypt chat messages sent by Zoom users. If this feature is used in the app, users will only see encrypted chats when they use the app, and notifications of an encrypted chat will be sent with no content involved. === Bro === Bro is a system that detects network attackers and abnormal traffic on the internet. It emerged at the University of California, Berkeley that detects invading network systems. The system does not apply to the detection of eavesdropping by default, but can be modified to an offline analyzing tool for eavesdropping attacks. Bro runs under Digital Unix, FreeBSD, IRIX, SunOS, and Solaris operating systems, with the implementation of approximately 22,000 lines of C++ and 1,900 lines of Bro. It is still in the process of development for real-world applications. === Chaosreader === Chaosreader is a simplified version of many open-source eavesdropping tools. It creates HTML pages on the content of when a network intrusion is detected. No actions are taken when an attack occurs and only information such as time, network location on which system or wall the user is trying to attack will be recorded. === CommView === CommView is specific to Windows systems which limits real-world applications because of its specific system usage. It captures network traffic and eavesdropping attempts by using packet analyzing and decoding. === Firewalls === Firewall technology filters network traffic and blocks malicious users from attacking the network system. It prevents users from intruding into private networks. Having a firewall in the entrance to a network system requires user authentications before allowing actions performed by users. There are different types of firewall technologies that can be applied to different types of networks. === Security agencies === A Secure Node Identification Agent is a mobile agent used to distinguish secure neighbor nodes and informs the Node Monitoring System (NMOA). The NMOA stays within nodes and monitors the energy exerted, and receives information about nodes including node ID, location, signal strength, hop counts, and more. It detects nodes nearby that are moving out of range by comparing signal strengths. The NMOA signals the Secure Node Identification Agent (SNIA) and updates each other on neighboring node information. The Node BlackBoard is a knowledge base that reads and updates the agents, acting as the brain of the security system. The Node Key Management agent is created when an encryption key is inserted to th
Read more →
Deep learning speech synthesis

Deep learning speech synthesis refers to the application of deep learning models to generate natural-sounding human speech from written text (text-to-speech) or spectrum (vocoder). Deep neural networks are trained using large amounts of recorded speech and, in the case of a text-to-speech system, the associated labels and/or input text. == Formulation == Given an input text or some sequence of linguistic units Y {\displaystyle Y} , the target speech X {\displaystyle X} can be derived by X = arg ⁡ max P ( X | Y , θ ) {\displaystyle X=\arg \max P(X|Y,\theta )} where θ {\displaystyle \theta } is the set of model parameters. Typically, the input text will first be passed to an acoustic feature generator, then the acoustic features are passed to the neural vocoder. For the acoustic feature generator, the loss function is typically L1 loss (Mean Absolute Error, MAE) or L2 loss (Mean Square Error, MSE). These loss functions impose a constraint that the output acoustic feature distributions must be Gaussian or Laplacian. In practice, since the human voice band ranges from approximately 300 to 4000 Hz, the loss function will be designed to have more penalty on this range: l o s s = α loss human + ( 1 − α ) loss other {\displaystyle loss=\alpha {\text{loss}}_{\text{human}}+(1-\alpha ){\text{loss}}_{\text{other}}} where loss human {\displaystyle {\text{loss}}_{\text{human}}} is the loss from human voice band and α {\displaystyle \alpha } is a scalar, typically around 0.5. The acoustic feature is typically a spectrogram or Mel scale. These features capture the time-frequency relation of the speech signal, and thus are sufficient to generate intelligent outputs. The Mel-frequency cepstrum feature used in the speech recognition task is not suitable for speech synthesis, as it reduces too much information. == History == In September 2016, DeepMind released WaveNet, which demonstrated that deep learning-based models are capable of modeling raw waveforms and generating speech from acoustic features like spectrograms or mel-spectrograms. Although WaveNet was initially considered to be computationally expensive and slow to be used in consumer products at the time, a year after its release, DeepMind unveiled a modified version of WaveNet known as "Parallel WaveNet," a production model 1,000 faster than the original. This was followed by Google AI's Tacotron 2 in 2018, which demonstrated that neural networks could produce highly natural speech synthesis but required substantial training data—typically tens of hours of audio—to achieve acceptable quality. Tacotron 2 used an autoencoder architecture with attention mechanisms to convert input text into mel-spectrograms, which were then converted to waveforms using a separate neural vocoder. When trained on smaller datasets, such as 2 hours of speech, the output quality degraded while still being able to maintain intelligible speech, and with just 24 minutes of training data, Tacotron 2 failed to produce intelligible speech. In 2019, Microsoft Research introduced FastSpeech, which addressed speed limitations in autoregressive models like Tacotron 2. FastSpeech utilized a non-autoregressive architecture that enabled parallel sequence generation, significantly reducing inference time while maintaining audio quality. Its feedforward transformer network with length regulation allowed for one-shot prediction of the full mel-spectrogram sequence, avoiding the sequential dependencies that bottlenecked previous approaches. The same year saw the release of HiFi-GAN, a generative adversarial network (GAN)-based vocoder that improved the efficiency of waveform generation while producing high-fidelity speech. In 2020, the release of Glow-TTS introduced a flow-based approach that allowed for fast inference and voice style transfer capabilities. In March 2020, the free text-to-speech website 15.ai was launched. 15.ai gained widespread international attention in early 2021 for its ability to synthesize emotionally expressive speech of fictional characters from popular media with minimal amount of data. The creator of 15.ai (known pseudonymously as 15) stated that 15 seconds of training data is sufficient to perfectly clone a person's voice (hence its name, "15.ai"), a significant reduction from the previously known data requirement of tens of hours. 15.ai is credited as the first platform to popularize AI voice cloning in memes and content creation. 15.ai used a multi-speaker model that enabled simultaneous training of multiple voices and emotions, implemented sentiment analysis using DeepMoji, and supported precise pronunciation control via ARPABET. The 15-second data efficiency benchmark was later corroborated by OpenAI in 2024. == Semi-supervised learning == Currently, self-supervised learning has gained much attention through better use of unlabelled data. Research has shown that, with the aid of self-supervised loss, the need for paired data decreases. == Zero-shot speaker adaptation == Zero-shot speaker adaptation is promising because a single model can generate speech with various speaker styles and characteristic. In June 2018, Google proposed to use pre-trained speaker verification models as speaker encoders to extract speaker embeddings. The speaker encoders then become part of the neural text-to-speech models, so that it can determine the style and characteristics of the output speech. This procedure has shown the community that it is possible to use only a single model to generate speech with multiple styles. == Neural vocoder == In deep learning-based speech synthesis, neural vocoders play an important role in generating high-quality speech from acoustic features. The WaveNet model proposed in 2016 achieves excellent performance on speech quality. Wavenet factorised the joint probability of a waveform x = { x 1 , . . . , x T } {\displaystyle \mathbf {x} =\{x_{1},...,x_{T}\}} as a product of conditional probabilities as follows p θ ( x ) = ∏ t = 1 T p ( x t | x 1 , . . . , x t − 1 ) {\displaystyle p_{\theta }(\mathbf {x} )=\prod _{t=1}^{T}p(x_{t}|x_{1},...,x_{t-1})} where θ {\displaystyle \theta } is the model parameter including many dilated convolution layers. Thus, each audio sample x t {\displaystyle x_{t}} is conditioned on the samples at all previous timesteps. However, the auto-regressive nature of WaveNet makes the inference process dramatically slow. To solve this problem, Parallel WaveNet was proposed. Parallel WaveNet is an inverse autoregressive flow-based model which is trained by knowledge distillation with a pre-trained teacher WaveNet model. Since such inverse autoregressive flow-based models are non-auto-regressive when performing inference, the inference speed is faster than real-time. Meanwhile, Nvidia proposed a flow-based WaveGlow model, which can also generate speech faster than real-time. However, despite the high inference speed, parallel WaveNet has the limitation of needing a pre-trained WaveNet model, so that WaveGlow takes many weeks to converge with limited computing devices. This issue has been solved by Parallel WaveGAN, which learns to produce speech through multi-resolution spectral loss and GAN learning strategies.
Read more →
GITEX Vietnam

GITEX AI Vietnam is an upcoming technology exhibition and conference scheduled to take place in Hanoi, Vietnam, on 1–2 October 2026. The event is organised by KAOUN International in partnership with the Dubai World Trade Centre and the Vietnam National Innovation Center (NIC). It is part of the global GITEX network of technology exhibitions. The event supported by Vietnam's Ministry of Finance and Ministry of Science and Technology. == Activity == GITEX AI Vietnam was announced in 2025 as part of GITEX's expansion into Southeast Asia. Its launch coincides with Vietnam's National Innovation Week. Media reports linked to the announcement projected Vietnam's digital economy could reach around US$200 billion by 2030. The event includes exhibitions, conferences, and networking sessions. Co-located platforms include AI Everything Vietnam, Startups North Star Vietnam, GITEX Cyber Valley Vietnam, and FDX Vietnam. Expected participants include policymakers, technology companies, startups, investors, and researchers.
Read more →
Fuzzy Control Language

Fuzzy Control Language, or FCL, is a language for implementing fuzzy logic, especially fuzzy control. It was standardized by IEC 61131-7. It is a domain-specific programming language: it has no features unrelated to fuzzy logic, so it is impossible to even print "Hello, world!". Therefore, one does not write a program in FCL, but one may write part of it in FCL. == Example == RULE 0: IF (temperature IS cold) THEN (output IS low) RULE 1: IF (temperature IS very cold) THEN (output IS high) == Limitations == FCL is not an entirely complete fuzzy language, for instance, it does not support "hedges", which are adverbs that modify the set. For instance, the programmer cannot write: RULE 0: If (Temperature is VERY COLD) then (Output is VERY HIGH) However, the programmer can simply define new sets for "very cold" and "very high". FCL also lacks support for higher-order fuzzy sets, subsets, and so on. None of these features are essential to fuzzy control, although they may be nice to have.
Read more →
PNGOUT

PNGOUT is a freeware command line optimizer for PNG images written by Ken Silverman. The transformation is lossless, meaning that the resulting image is visually identical to the source image. According to its author, this program can often get higher compression than other optimizers by 5–10%. It is possible to compress some inflated PNGs to a size below 1% of the original file. PNGOUT was also available as a plug-in for the freeware image viewer IrfanView and can be enabled as an option when saving files. It allows editing of various PNGOUT settings via a dialog box. PNGOUT integration was removed in IrfanView version 4.58 in favour of OptiPNG. In 2006, a commercial version of PNGOUT with a graphical user interface, known as PNGOUTWin, was released by Ardfry Imaging, a small company Silverman co-founded in 2005. There is also a freeware GUI frontend to PNGOUT available, known as PNGGauntlet. == Main operation == The main function of PNGOUT is to reduce the size of image data contained in the IDAT chunk. This chunk is compressed using the deflate algorithm. Deflate algorithms can vary in speed and compression ratio, with higher compression ratios generally implying lower speed. Ken Silverman wrote a deflate compressor for PNGOUT that is slower than the ones used in most graphics software, but produces smaller files. PNGOUT also performs automatic bit depth, color, and palette reduction where appropriate.
Read more →
Generative adversarial network

A generative adversarial network (GAN) is a class of machine learning frameworks and a prominent framework for approaching generative artificial intelligence. The concept was initially developed by Ian Goodfellow and his colleagues in June 2014. In a GAN, two neural networks compete with each other in the form of a zero-sum game, where one agent's gain is another agent's loss. Given a training set, this technique learns to generate new data with the same statistics as the training set. For example, a GAN trained on photographs can generate new photographs that look at least superficially authentic to human observers, having many realistic characteristics. Though originally proposed as a form of generative model for unsupervised learning, GANs have also proved useful for semi-supervised learning, fully supervised learning, and reinforcement learning. The core idea of a GAN is based on the "indirect" training through the discriminator, another neural network that can tell how "realistic" the input seems, which itself is also being updated dynamically. This means that the generator is not trained to minimize the distance to a specific image, but rather to fool the discriminator. This enables the model to learn in an unsupervised manner. GANs are similar to mimicry in evolutionary biology, with an evolutionary arms race between both networks. == Definition == === Mathematical === The original GAN is defined as the following game: Each probability space ( Ω , μ ref ) {\displaystyle (\Omega ,\mu _{\text{ref}})} defines a GAN game. There are 2 players: generator and discriminator. The generator's strategy set is P ( Ω ) {\displaystyle {\mathcal {P}}(\Omega )} , the set of all probability measures μ G {\displaystyle \mu _{G}} on Ω {\displaystyle \Omega } . The discriminator's strategy set is the set of Markov kernels μ D : Ω → P [ 0 , 1 ] {\displaystyle \mu _{D}:\Omega \to {\mathcal {P}}[0,1]} , where P [ 0 , 1 ] {\displaystyle {\mathcal {P}}[0,1]} is the set of probability measures on [ 0 , 1 ] {\displaystyle [0,1]} . The GAN game is a zero-sum game, with objective function L ( μ G , μ D ) := E x ∼ μ ref , y ∼ μ D ( x ) ⁡ [ ln ⁡ y ] + E x ∼ μ G , y ∼ μ D ( x ) ⁡ [ ln ⁡ ( 1 − y ) ] . {\displaystyle L(\mu _{G},\mu _{D}):=\operatorname {E} _{x\sim \mu _{\text{ref}},y\sim \mu _{D}(x)}[\ln y]+\operatorname {E} _{x\sim \mu _{G},y\sim \mu _{D}(x)}[\ln(1-y)].} The generator aims to minimize the objective, and the discriminator aims to maximize the objective. The generator's task is to approach μ G ≈ μ ref {\displaystyle \mu _{G}\approx \mu _{\text{ref}}} , that is, to match its own output distribution as closely as possible to the reference distribution. The discriminator's task is to output a value close to 1 when the input appears to be from the reference distribution, and to output a value close to 0 when the input looks like it came from the generator distribution. === In practice === The generative network generates candidates while the discriminative network evaluates them. This creates a contest based on data distributions, where the generator learns to map from a latent space to the true data distribution, aiming to produce candidates that the discriminator cannot distinguish from real data. The discriminator's goal is to correctly identify these candidates, but as the generator improves, its task becomes more challenging, increasing the discriminator's error rate. A known dataset serves as the initial training data for the discriminator. Training involves presenting it with samples from the training dataset until it achieves acceptable accuracy. The generator is trained based on whether it succeeds in fooling the discriminator. Typically, the generator is seeded with randomized input that is sampled from a predefined latent space (e.g. a multivariate normal distribution). Thereafter, candidates synthesized by the generator are evaluated by the discriminator. Independent backpropagation procedures are applied to both networks so that the generator produces better samples, while the discriminator becomes more skilled at flagging synthetic samples. When used for image generation, the generator is typically a deconvolutional neural network, and the discriminator is a convolutional neural network. === Relation to other statistical machine learning methods === GANs are implicit generative models, which means that they do not explicitly model the likelihood function nor provide a means for finding the latent variable corresponding to a given sample, unlike alternatives such as flow-based generative model. Compared to fully visible belief networks such as WaveNet and PixelRNN and autoregressive models in general, GANs can generate one complete sample in one pass, rather than multiple passes through the network. Compared to Boltzmann machines and linear ICA, there is no restriction on the type of function used by the network. Since neural networks are universal approximators, GANs are asymptotically consistent. Variational autoencoders might be universal approximators, but it is not proven as of 2017. == Mathematical properties == === Measure-theoretic considerations === This section provides some of the mathematical theory behind these methods. In modern probability theory based on measure theory, a probability space also needs to be equipped with a σ-algebra. As a result, a more rigorous definition of the GAN game would make the following changes:Each probability space ( Ω , B , μ ref ) {\displaystyle (\Omega ,{\mathcal {B}},\mu _{\text{ref}})} defines a GAN game. The generator's strategy set is P ( Ω , B ) {\displaystyle {\mathcal {P}}(\Omega ,{\mathcal {B}})} , the set of all probability measures μ G {\displaystyle \mu _{G}} on the measure-space ( Ω , B ) {\displaystyle (\Omega ,{\mathcal {B}})} . The discriminator's strategy set is the set of Markov kernels μ D : ( Ω , B ) → P ( [ 0 , 1 ] , B ( [ 0 , 1 ] ) ) {\displaystyle \mu _{D}:(\Omega ,{\mathcal {B}})\to {\mathcal {P}}([0,1],{\mathcal {B}}([0,1]))} , where B ( [ 0 , 1 ] ) {\displaystyle {\mathcal {B}}([0,1])} is the Borel σ-algebra on [ 0 , 1 ] {\displaystyle [0,1]} .Since issues of measurability never arise in practice, these will not concern us further. === Choice of the strategy set === In the most generic version of the GAN game described above, the strategy set for the discriminator contains all Markov kernels μ D : Ω → P [ 0 , 1 ] {\displaystyle \mu _{D}:\Omega \to {\mathcal {P}}[0,1]} , and the strategy set for the generator contains arbitrary probability distributions μ G {\displaystyle \mu _{G}} on Ω {\displaystyle \Omega } . However, as shown below, the optimal discriminator strategy against any μ G {\displaystyle \mu _{G}} is deterministic, so there is no loss of generality in restricting the discriminator's strategies to deterministic functions D : Ω → [ 0 , 1 ] {\displaystyle D:\Omega \to [0,1]} . In most applications, D {\displaystyle D} is a deep neural network function. As for the generator, while μ G {\displaystyle \mu _{G}} could theoretically be any computable probability distribution, in practice, it is usually implemented as a pushforward: μ G = μ Z ∘ G − 1 {\displaystyle \mu _{G}=\mu _{Z}\circ G^{-1}} . That is, start with a random variable z ∼ μ Z {\displaystyle z\sim \mu _{Z}} , where μ Z {\displaystyle \mu _{Z}} is a probability distribution that is easy to compute (such as the uniform distribution, or the Gaussian distribution), then define a function G : Ω Z → Ω {\displaystyle G:\Omega _{Z}\to \Omega } . Then the distribution μ G {\displaystyle \mu _{G}} is the distribution of G ( z ) {\displaystyle G(z)} . Consequently, the generator's strategy is usually defined as just G {\displaystyle G} , leaving z ∼ μ Z {\displaystyle z\sim \mu _{Z}} implicit. In this formalism, the GAN game objective is L ( G , D ) := E x ∼ μ ref ⁡ [ ln ⁡ D ( x ) ] + E z ∼ μ Z ⁡ [ ln ⁡ ( 1 − D ( G ( z ) ) ) ] . {\displaystyle L(G,D):=\operatorname {E} _{x\sim \mu _{\text{ref}}}[\ln D(x)]+\operatorname {E} _{z\sim \mu _{Z}}[\ln(1-D(G(z)))].} === Generative reparametrization === The GAN architecture has two main components. One is casting optimization into a game, of form min G max D L ( G , D ) {\displaystyle \min _{G}\max _{D}L(G,D)} , which is different from the usual kind of optimization, of form min θ L ( θ ) {\displaystyle \min _{\theta }L(\theta )} . The other is the decomposition of μ G {\displaystyle \mu _{G}} into μ Z ∘ G − 1 {\displaystyle \mu _{Z}\circ G^{-1}} , which can be understood as a reparametrization trick. To see its significance, one must compare GAN with previous methods for learning generative models, which were plagued with "intractable probabilistic computations that arise in maximum likelihood estimation and related strategies". At the same time, Kingma and Welling and Rezende et al. developed the same idea of reparametrization into a general stochastic backpropagation method. Among its first applications was the variational autoencoder. === Move order and st
Read more →
Course of Action Display and Evaluation Tool

Course of Action Display and Evaluation Tool (CADET) was a research program, and the eponymous prototype software system, that applied knowledge-based techniques of Artificial Intelligence to the problem of battle planning. CADET was also known as Course of Action Display and Elaboration Tool. It was considered an early example of such systems and was funded by the United States Army and by the Defense Advanced Research Projects Agency (DARPA). CADET influenced a later DARPA program called RAID which in turn produced a technology adopted by the United States Army and the United States Marine Corps. == History == The development of Course of Action Display and Evaluation Tool (CADET) began in 1996, at the Carnegie Group, Inc., Pittsburgh PA, funded under the Small Business Innovation Research (SBIR) program. The goal of the first phase SBIR project was to produce “...a live storyboard of [Course of Action] COA development, wargaming, animation, and assessment.” In 1997, the United States Army awarded the Carnegie Group Inc. $750K for SBIR Phase II. The intent was to develop “...a war-gaming modeling and analysis Decision Support System (DSS), … CADET will consist of a combination of Knowledge-Based and decision analytic tools and technologies to provide fast nimble COA war-gaming modeling, simulation, and animation under direct control of the commander and staff. ...Phase II will result in an operations prototype (OP) suitable for use and evaluation in field exercises.” In 2000, CADET was integrated and experimentally evaluated within the framework of the Integrated Course of Action Critiquing and Elaboration System (ICCES) experiment, conducted by the Battle Command Battle Laboratory – Leavenworth (BCBL-L) within the program Concept Experimentation Program (CEP) sponsored by TRADOC. In 2000-2002, DARPA applied CADET in the program titled Command Post of the Future (CPoF) as a tool to generate a course of action. Under the umbrella of the CPoF program, CADET was integrated with the FOX GA system to provide a detailed planner, coupled with COA generation capability. In the same period, Battle Command Battle Lab-Huachuca (BCBL-H) performed an integration CADET with the system called All Source Analysis System-Light (ASAS-L); here CADET was intended to generate plans for intelligence assets, and conduct wargames of different COAs, enemy versus friendly. From 1996 through 2002, work on CADET was performed by the Carnegie Group, Inc., and supported by funding from the US Army CECOM (CADET SBIR Phase I, CADET SBIR Phase II and CADET Enhancements); DARPA (Command Post of the Future); and TRADOC BCBL-H. == Operation == CADET was intended to be used by the staff of the United States Army Brigade, within the Military Decision Making Process (MDMP). In particular, CADET helped produce, automatically or semi-automatically, the products generated within the step of MDMP called Course of Action (COA) Development and the following step of MDMP called COA Analysis and Wargaming. CADET software resided on a laptop computer. Using the computer, the staff officers entered the input to CADET, or alternatively this input arrived at CADET from upstream computer systems. The input consisted of: Order of Battle, i.e., the units constituting the friendly brigade and the enemy units participating in the battle, and their various characteristics; primary activities of the Course of Action, where each activity is typically linked to one or more geographic areas or a route, and sometimes to a major unit executing the activity; digital map of the region where the battle was to take place, including the digital description of significant features such as locations of friendly and enemy units, roads, assembly areas, objectives, and axes of attacks. Taking this input, CADET automatically performed the following tasks (not sequentially): Planning and scheduling the low-level tasks necessary for a given COA Allocating tasks to various units and assets constituting the brigade Assigning suitable locations and routes Estimating the battle losses (attrition) of friendly and enemy forces, and consumption of resources (e.g., fuel and ammunition) Predicting enemy actions or reactions. CADET produced the following outputs: Synchronization matrix, directly editable and printable; synchronization matrix is a kind of Gantt chart that shows assignments of activities to units, to locations/routes and to time periods Map overlays in PPT or JPG formats Animation output XML formally-encoded plan Textual Operation Plan (OPLAN) draft E-mail messages with attachments: XML and text versions of OPLAN == Design == The core algorithm is a planning algorithm where CADET uses a knowledge-based approach of the hierarchical-task-network type. Each task class is associated with a model of more detailed subtasks that should be performed in order to accomplish the higher-level task. Algorithms selected (heuristically) a task and then decomposes it into subtasks. Although similar to hierarchical-task-network planning algorithm, CADET’s algorithm includes elements of adversarial reasoning. After adding a subtask, the algorithm uses rules to determine the enemy’s probable actions and reactions as well as friendly counteractions This approximated the action-reaction-counteraction technique of manual wargaming used by the United States Army. When a task involves movements of a unit, the algorithm performs routing, i.e., finds a route for the movement that minimizes the time required for the movement as well as exposure to the enemy attacks. Each added tasks (subtask) normally requires a unit which would execute the task, and a time period when the task would be executed. Therefore, when a certain number of subtasks is added by the planning process, the algorithm also performs the allocation of the newly added subtasks to units and to time periods (i.e., scheduling). allocation and scheduling of tasks relies on both domain-specific and constraint-guided heuristics. A tasks may also require expenditures of fuel and ammunition. If the tasks involves engagement with the enemy, the performing units will experience lossesof personnel and weapon systems (attrition). CADET’s algorithm includes estimates of consumption of different types of consumables, and also attrition. Depending on the degree of attrition and consumption, CADET adds tasks that are needed to refuel or reconstitute the units. The algorithm continually interleaves incremental steps of planning, routing, scheduling, and attrition and consumption estimates. == Evaluation == Two evaluation experiments are described in literature. The first experiment called ICCES took three days. The subjects were Army officers from combat arms branches, with 11 to 23 years of active service, in the ranks of majors and lieutenant colonels, a total of 8. Each officer was given 4 hours of training learning to operate CADET and related computer tools. Officers were divided into two groups and given a tactical scenario. One group (the control group) used the traditional, manual process; the other used the system called ICCES, the automated core of which was CADET. Each group produced three COA sketches and statements and one COA synchronization matrix. Then, the experiment was repeated with another scenario but the control group became the automated group and vice versa. The users were generally satisfied with the quality of the ICCES-generated products. The group using ICCES made only a few changes to the product that was automatically generated, indicating that they agreed with the majority of the plan that ICCES produced. The second experiment was reminiscent of Turing test. The experiment involved one user, nine judges (active-duty officers, mainly colonels and lieutenant colonels), and five scenarios obtained from several US Army exercises. For each scenario, experimenters obtained synchronization matrices that were produced in earlier exercises, typically by a team of four to five officers in three to four hours, spending approximately 16 person-hours in total. Using these scenarios and COAs, the user had CADET generate automatically detailed plans and express them as synchronization matrices. The user, a retired US Army officer, reviewed and slightly edited the matrices. The entire process took less than two minutes of computations by and approximately 20 minutes of review and post-editing, approximately 0.4 person-hour in total per product. The experimenters gave the resulting matrices the same visual style as those produced by humans. The judges, who did not know whether a planning product was a traditional product of humans, or with computerized aids, were asked to grade the products. The result was that the average grades for manual products and CADET-generated products were statistically indistinguishable, even though CADET-generated products required far less time to produce. == Legacy == CADET served as “...an example of how even relatively basic A
Read more →
Generative engine optimization

Generative engine optimization (GEO) is one of the names given to the practice of structuring digital content and managing online presence to improve visibility in responses generated by generative artificial intelligence (AI) systems. The practice influences the way large language models (LLMs) retrieve, summarize, and present information in response to user queries. Related terms include answer engine optimization (AEO) and artificial intelligence optimization (AIO). The concept of GEO first appeared in response to generative AI technologies being integrated into mainstream search and information retrieval systems. Tools are used to monitor how websites and brands are cited, referenced, or incorporated into responses produced by large language models. == Terminology == Several overlapping terms describe related practices, and usage varies across practitioners, vendors, and publications. No consensus definition distinguishing these terms had been established in the academic literature as of early 2026, and the terms are frequently used interchangeably in trade and practitioner contexts. Other terms for the same concept include answer engine optimization (AEO), large language model optimization (LLMO), artificial intelligence optimization (AIO), and AI SEO. In 2026, Google released documentation entitled "Optimizing your website for generative AI features on Google Search." According to this documentation, "optimizing for generative AI search is optimizing for the search experience, and thus still SEO.” This position had previously been shared at conferences, with 2026 being the first time Google released official documentation stating it. == Factors influencing generative engine optimization == By early 2026, the focus of GEO practitioners shifted from simple keyword placement to "semantic relevance", a metric driven by the integration of advertising into conversational AI. OpenAI and Google began monetizing AI search results, which is not currently considered an aspect of generative engine optimization but is adjacent.
Read more →
Talking Angela

Talking Angela is a mobile game (formerly a chatbot), developed by Slovenian studio Outfit7 as part of the Talking Tom & Friends series. It was released on 13 November 2012 and December 2012 for iPhone, iPod and iPad, January 2013 for Android, and January 2014 for Google Play. The game's successor, the My Talking Angela game, was released in December 2014. The game takes place in a café in Paris and allows players to interact with Angela, an anthropomorphic white cat in different ways. Players can use coins to purchase makeup, accessories and items, as well as drinks that will trigger different visual effects. The fortune cookie button causes Angela to read out a fortune cookie, while the bird icon will prompt birds to fly around the screen, or have Angela feed them. Players can also pet or poke Angela, as well the café's sign. Prior to their removal, the game featured a chat system and a camera button. Users can engage in conversations with Angela, ask for quizzes or initiate a short snippet of the song "That's Falling In Love". If the player was to type in "Who is an idiot?", Angela would respond with a random swear word. Additionally, inquiring Angela about sexual topics would cause her to reply with "Do you want to talk about sex?", though she will quickly change the topic regardless of what the player writes next. A hoax claiming that Angela's eyes were hidden cameras that enabled hackers or paedophiles to watch children was spread. Despite the claims, Snopes and The Guardian found no evidence. Due to the hoax, Angela received a blue dress, as well as an altered eye asset with a different reflection, and later the chat and camera functions were removed altogether. == Hoaxes == In February 2014, Talking Angela was the subject of an Internet hoax alleging that the application was a front for child predators to exploit children. The rumor, which was widely circulated on Facebook and various websites claiming to be dedicated to parenting, claims that a sinister sexual predator or hacker, asked children for private personal information using the game's text-chat feature. Other versions of the rumour even attributed the disappearance of a child to the game; one news report claimed that a seven year old boy disappeared after downloading the app. Another variation included that it was run by a paedophile ring, citing a man that could be seen in Angela's eyes. The app's developers, Outfit7, later gave a statement refuting the hoaxes. The hoax was eventually debunked by Snopes, a fact-checking website. The site's owners, Barbara and David Mikkelson, reported that they had tried to "prompt" it to give responses asking for private information, but were unsuccessful, even when asking it explicitly sexual questions. While it is true that, in the game with child mode off, Angela does ask for the user's name, age and personal preferences to determine conversation topics, Outfit7 has said that this information is all "anonymized" and all personal information is removed from it. It is also impossible for a person to take control of what Angela says in the game, since the game is based on chatbot software. When the mode was turned on, the chat feature was disabled, meaning no personal questions could be asked. In 2015, the hoax was revived on Facebook, which prompted online security company Sophos and The Guardian to debunk it again. Sophos employee Paul Ducklin wrote that the message being posted on Facebook promoting the hoax was "close to 600 rambling, repetitious words, despite claiming at the start that it didn't have words to describe the situation. It's ill-written, and borders on being illiterate and incomprehensible." Bruce Wilcox, one of the game's programmers, attributed the hoax's popularity to the fact that the chatbot program in Talking Angela aimed to sound realistic. Concern was raised that the game's child mode may have been too easy for children to turn off. It allowed them to purchase "coins", premium currency in the game, via iTunes, and enabled the chat feature. While not "connecting your children to paedophiles", this still raised concerns according to The Guardian. === Impact === The scare significantly boosted the game's popularity, and was credited with helping the app enter the top 10 free iPhone apps soon after the hoax became widely known in February 2015,In the truth the reason there is a man in Angela’s eyes is because of pareidoila, the ability to see through diamonds and other minerals and water bodies and shiny objects,which is the reason why players notice a man in her eyes,The truth is that being Angela’s eyes simply serve as a reflective surface,Because of the low quality of this reflection the reflection was mistaken for a humanoid figure. oref>Smith, Josh (19 February 2014). "Talking Angela App Scare Skyrockets App to Top of Charts". GottaBeMobile.com. Archived from the original on 2 April 2016. Retrieved 10 May 2014. and third most popular for all iPhone apps at the start of the following month. In 2016, Outfit7 removed the chat feature along with the camera function from the app due to this controversy, though this decision was met with criticism.
Read more →
SCIgen

SCIgen is a paper generator that uses context-free grammar to randomly generate nonsense in the form of computer science research papers. Its original data source was a collection of computer science papers downloaded from CiteSeer. All elements of the papers are formed, including graphs, diagrams, and citations. Created by scientists at the Massachusetts Institute of Technology, its stated aim is "to maximize amusement, rather than coherence." Originally created in 2005 to expose the lack of scrutiny of submissions to conferences, the generator subsequently became used, primarily by Chinese academics, to create large numbers of fraudulent conference submissions, leading to the retraction of 122 SCIgen generated papers and the creation of detection software to combat its use. == Sample output == Opening abstract of Rooter: A Methodology for the Typical Unification of Access Points and Redundancy: Many physicists would agree that, had it not been for congestion control, the evaluation of web browsers might never have occurred. In fact, few hackers worldwide would disagree with the essential unification of voice-over-IP and public/private key pair. In order to solve this riddle, we confirm that SMPs can be made stochastic, cacheable, and interposable. == Prominent results == In 2005, a paper generated by SCIgen, Rooter: A Methodology for the Typical Unification of Access Points and Redundancy, was accepted as a non-reviewed paper to the 2005 World Multiconference on Systemics, Cybernetics and Informatics (WMSCI) and the authors were invited to speak. The authors of SCIgen described their hoax on their website, and it soon received great publicity when picked up by Slashdot. WMSCI withdrew their invitation, but the SCIgen team went anyway, renting space in the hotel separately from the conference and delivering a series of randomly generated talks on their own "track". The organizer of these WMSCI conferences is Professor Nagib Callaos. From 2000 until 2005, the WMSCI was also sponsored by the Institute of Electrical and Electronics Engineers. The IEEE stopped granting sponsorship to Callaos from 2006 to 2008. Submitting the paper was a deliberate attempt to embarrass WMSCI, which the authors claim accepts low-quality papers and sends unsolicited requests for submissions in bulk to academics. As the SCIgen website states: One useful purpose for such a program is to auto-generate submissions to conferences that you suspect might have very low submission standards. A prime example, which you may recognize from spam in your inbox, is SCI/IIIS and its dozens of co-located conferences (check out the very broad conference description on the WMSCI 2005 website). Computing writer Stan Kelly-Bootle noted in ACM Queue that many sentences in the "Rooter" paper were individually plausible, which he regarded as posing a problem for automated detection of hoax articles. He suggested that even human readers might be taken in by the effective use of jargon ("The pun on root/router is par for MIT-graduate humor, and at least one occurrence of methodology is mandatory") and attribute the paper's apparent incoherence to their own limited knowledge. His conclusion was that "a reliable gibberish filter requires a careful holistic review by several peer domain experts". === Schlangemann === The pseudonym "Herbert Schlangemann" was used to publish fake scientific articles in international conferences that claimed to practice peer review. The name is taken from the Swedish short film Der Schlangemann. In 2008, in response to a series of Call-for-Paper e-mails, SCIgen was used to generate a false scientific paper titled Towards the Simulation of E-Commerce, using "Herbert Schlangemann" as the author. The article was accepted at the 2008 International Conference on Computer Science and Software Engineering (CSSE 2008), co-sponsored by the IEEE, to be held in Wuhan, China, and the author was invited to be a session chair on grounds of his fictional Curriculum Vitae. The official review comment: "This paper presents cooperative technology and classical Communication. In conclusion, the result shows that though the much-touted amphibious algorithm for the refinement of randomized algorithms is impossible, the well-known client-server algorithm for the analysis of voice-over-IP by Kumar and Raman runs in _(n) time. The authors can clearly identify important features of visualization of DHTs and analyze them insightfully. It is recommended that the authors should develop ideas more cogently, organizes them more logically, and connects them with clear transitions." The paper was available for a short time in the IEEE Xplore Database, but was then removed. The entire story is described in the official "Herbert Schlangemann" blog, and it also received attention in Slashdot and the German-language technology-news site Heise Online. In 2009, the same incident happened and Herbert Schlangemann's latest fake paper PlusPug: A Methodology for the Improvement of Local-Area Networks was accepted for oral presentation at the 2009 International Conference on e-Business and Information System Security (EBISS 2009), also co-sponsored by IEEE, to be held again in Wuhan, China. In all cases, the published papers were withdrawn from the conferences' proceedings, and the conference organizing committee as well as the names of the keynote speakers were removed from their websites. === List of works with notable acceptance === ==== In conferences ==== Rob Thomas: Rooter: A Methodology for the Typical Unification of Access Points and Redundancy, 2005 for WMSCI (see above) Mathias Uslar's paper was accepted to the IPSI-BG conference. Professor Genco Gulan published a paper in the 3rd International Symposium of Interactive Media Design. A 2013 scientometrics paper demonstrated that at least 85 SCIgen papers have been published by IEEE and Springer. Over 120 SCIgen papers were removed according to this research. ==== In journals ==== Students at Iran's Sharif University of Technology published a paper in Elsevier's Journal of Applied Mathematics and Computation. The students wrote under the surname "MosallahNejad", which translates literally from Persian language (in spite of not being a traditional Persian name) as "from an Armed Breed". The paper was subsequently removed when the publishers were informed that it was a joke paper. Mikhail Gelfand published a translation of the "Rooter" article in the Russian-language Journal of Scientific Publications of Aspirants and Doctorants in August 2008. Gelfand was protesting against the journal, which was apparently not peer-reviewed and was being used by Russian PhD candidates to publish in an "accredited" scientific journal, charging them 4,000 Rubles to do so. The accreditation was revoked two weeks later. (See Dissernet for related information.) Springer Science+Business Media and IEEE were also the subject of similar pranks. === Spoofing Google Scholar and h-index calculators === Refereeing performed on behalf of the Institute of Electrical and Electronics Engineers has also been subject to criticism after fake papers were discovered in conference publications, most notably by Labbé and a researcher using the pseudonym of Schlangemann. Cyril Labbé from Grenoble University demonstrated the vulnerability of h-index calculations based on Google Scholar output by feeding it a large set of SCIgen-generated documents that were citing each other, effectively an academic link farm, in a 2010 paper. Using this method the author managed to rank "Ike Antkare" ahead of Albert Einstein for instance. === 2013 retractions === In 2013, over 122 published conference papers created by SCIgen were retracted by Springer and the IEEE. Unlike previous submissions that were intended to be pranks, this submission were largely made by Chinese academics, who were using SCIgen papers to boost their publication record. === SciDetect === In 2015, SciDetect was released by Springer. This software, developed by Cyril Labbé, is designed to automatically detect papers generated by SCIgen. === 2021 report === In 2021, a study was published on 243 SCIgen papers that had been published in the academic literature. They found that SCIgen papers made up 75 per million papers (< 0.01%) in information science, and that only a small fraction of the detected papers had been dealt with.
Read more →
Content-based image retrieval

Content-based image retrieval, also known as query by image content (QBIC) and content-based visual information retrieval (CBVIR), is the application of computer vision techniques to the image retrieval problem, that is, the problem of searching for digital images in large databases (see this survey for a scientific overview of the CBIR field). Content-based image retrieval is opposed to traditional concept-based approaches (see Concept-based image indexing). "Content-based" means that the search analyzes the contents of the image rather than the metadata such as keywords, tags, or descriptions associated with the image. The term "content" in this context might refer to colors, shapes, textures, or any other information that can be derived from the image itself. CBIR is desirable because searches that rely purely on metadata are dependent on annotation quality and completeness. == Comparison with metadata searching == An image meta search requires humans to have manually annotated images by entering keywords or metadata in a large database, which can be time-consuming and may not capture the keywords desired to describe the image. The evaluation of the effectiveness of keyword image search is subjective and has not been well-defined. In the same regard, CBIR systems have similar challenges in defining success. "Keywords also limit the scope of queries to the set of predetermined criteria." and, "having been set up" are less reliable than using the content itself. == History == The term "content-based image retrieval" seems to have originated in 1992 when it was used by Japanese Electrotechnical Laboratory engineer Toshikazu Kato to describe experiments into automatic retrieval of images from a database, based on the colors and shapes present. Since then, the term has been used to describe the process of retrieving desired images from a large collection on the basis of syntactical image features. The techniques, tools, and algorithms that are used originate from fields such as statistics, pattern recognition, signal processing, and computer vision. === QBIC - Query By Image Content === The earliest commercial CBIR system was developed by IBM and was called QBIC (Query By Image Content). Recent network- and graph-based approaches have presented a simple and attractive alternative to existing methods. While the storing of multiple images as part of a single entity preceded the term BLOB (Binary Large OBject), the ability to fully search by content, rather than by description, had to await IBM's QBIC. === VisualRank === == Technical progress == The interest in CBIR has grown because of the limitations inherent in metadata-based systems, as well as the large range of possible uses for efficient image retrieval. Textual information about images can be easily searched using existing technology, but this requires humans to manually describe each image in the database. This can be impractical for very large databases or for images that are generated automatically, e.g. those from surveillance cameras. It is also possible to miss images that use different synonyms in their descriptions. Systems based on categorizing images in semantic classes like "cat" as a subclass of "animal" can avoid the miscategorization problem, but will require more effort by a user to find images that might be "cats", but are only classified as an "animal". Many standards have been developed to categorize images, but all still face scaling and miscategorization issues. Initial CBIR systems were developed to search databases based on image color, texture, and shape properties. After these systems were developed, the need for user-friendly interfaces became apparent. Therefore, efforts in the CBIR field started to include human-centered design that tried to meet the needs of the user performing the search. This typically means inclusion of: query methods that may allow descriptive semantics, queries that may involve user feedback, systems that may include machine learning, and systems that may understand user satisfaction levels. == Techniques == Many CBIR systems have been developed, but as of 2006, the problem of retrieving images on the basis of their pixel content remains largely unsolved. Different query techniques and implementations of CBIR make use of different types of user queries. === Query By Example === QBE (Query By Example) is a query technique that involves providing the CBIR system with an example image that it will then base its search upon. The underlying search algorithms may vary depending on the application, but result images should all share common elements with the provided example. Options for providing example images to the system include: A preexisting image may be supplied by the user or chosen from a random set. The user draws a rough approximation of the image they are looking for, for example with blobs of color or general shapes. This query technique removes the difficulties that can arise when trying to describe images with words. === Semantic retrieval === Semantic retrieval starts with a user making a request like "find pictures of Abraham Lincoln". This type of open-ended task is very difficult for computers to perform - Lincoln may not always be facing the camera or in the same pose. Many CBIR systems therefore generally make use of lower-level features like texture, color, and shape. These features are either used in combination with interfaces that allow easier input of the criteria or with databases that have already been trained to match features (such as faces, fingerprints, or shape matching). However, in general, image retrieval requires human feedback in order to identify higher-level concepts. === Relevance feedback (human interaction) === Combining CBIR search techniques available with the wide range of potential users and their intent can be a difficult task. An aspect of making CBIR successful relies entirely on the ability to understand the user intent. CBIR systems can make use of relevance feedback, where the user progressively refines the search results by marking images in the results as "relevant", "not relevant", or "neutral" to the search query, then repeating the search with the new information. Examples of this type of interface have been developed. === Iterative/machine learning === Machine learning and application of iterative techniques are becoming more common in CBIR. === Other query methods === Other query methods include browsing for example images, navigating customized/hierarchical categories, querying by image region (rather than the entire image), querying by multiple example images, querying by visual sketch, querying by direct specification of image features, and multimodal queries (e.g. combining touch, voice, etc.) == Content comparison using image distance measures == The most common method for comparing two images in content-based image retrieval (typically an example image and an image from the database) is using an image distance measure. An image distance measure compares the similarity of two images in various dimensions such as color, texture, shape, and others. For example, a distance of 0 signifies an exact match with the query, with respect to the dimensions that were considered. As one may intuitively gather, a value greater than 0 indicates various degrees of similarities between the images. Search results then can be sorted based on their distance to the queried image. Many measures of image distance (Similarity Models) have been developed. === Color === Computing distance measures based on color similarity is achieved by computing a color histogram for each image that identifies the proportion of pixels within an image holding specific values. Examining images based on the colors they contain is one of the most widely used techniques because it can be completed without regard to image size or orientation. However, research has also attempted to segment color proportion by region and by spatial relationship among several color regions. === Texture === Texture measures look for visual patterns in images and how they are spatially defined. Textures are represented by texels which are then placed into a number of sets, depending on how many textures are detected in the image. These sets not only define the texture, but also where in the image the texture is located. Texture is a difficult concept to represent. The identification of specific textures in an image is achieved primarily by modeling texture as a two-dimensional gray level variation. The relative brightness of pairs of pixels is computed such that degree of contrast, regularity, coarseness and directionality may be estimated. The problem is in identifying patterns of co-pixel variation and associating them with particular classes of textures such as silky, or rough. Other methods of classifying textures include: Co-occurrence matrix Laws texture energy Wavelet transform Orthogonal transforms (discrete Chebyshev moments) =
Read more →
The Stories of Ibis

The Stories of Ibis (アイの物語, Ai no Monogatari) is a Japanese science-fiction light novel by Hiroshi Yamamoto (山本弘) and translated by Takami Nieda. Yamamoto considered this to be an easier read than his earlier science fiction novel 'God Never Keeps Silent' because of its "light novel touch". The light novel was published in Japanese by Kadokawa Shoten and in English by Viz Media under their 'Haikasoru' imprint. The Stories of Ibis is told through a collection of short stories. All but two had been previously published. The two that Yamamoto wrote for the novel were 'The Day Shion Came' and 'AI's Story'. This is similar to The Illustrated Man by Ray Bradbury. Yamamoto drew from Bradbury's idea of short stories that were loosely connected. He represented this influence in the novel by giving Ibis a facial tattoo. == Plot == The Stories of Ibis begins with a wandering storyteller who encounters Ibis. He has the mindset that all robots are a threat to humanity and must be fought against for survival. He attacks the robot Ibis, not aware of who she is, as a result of his mindset. Ibis tells the storyteller that she is far more proficient in battle. During the battle the storyteller becomes injured and Ibis takes him to an android hospital to care for him. While he is recovering Ibis offers to tell him stories. While originally skeptical he agrees after Ibis makes it clear that the stories are not taboo. The space after each story is referred to as intermission and is a time for Ibis to comment on the story she just told. === The Universe on my Hands === The story is about a group of friends who are writing a science fiction story over the internet. One of the group members kills someone in real life. The rest of the short story is about how the group fights to convince this man to not commit suicide, but to turn himself in. He resolves to turn himself in, being hopeful to the future because he knows he has friends who care about him. The ending words of the story are a commentary. While the story they were writing was not real, the emotions they were feeling were real. === A Romance in Virtual Space === This is another story about human interactions over the internet. The device that allows people to enter virtual reality (VR) is MUGEN Net. Such devices are extremely expensive and most people need to go to a public server to use one. However the girl's parents in this story are wealthy enough to own one. This girl is shopping in VR when a boy meets her and asks her out for ice cream. All goes well and they plan for another. After some time of VR dating and awesome adventures with a female heroine, they agree to meet up in real life. He discovers that in reality, she is blind, yet he thinks she is brave and they continue dating. It's a wonderful short story of a secret utopia inside a dystopian culture of technology. === Mirror Girl === A short story about an artificial intelligence that grows over time with human interaction. The inspiration for this story was Ray Bradbury's I Sing the Body Electric. The mirror girl Shalice starts off with basic knowledge and by interacting with her owner develops. The owner grows up and marries a technician who incubates Shalice by teaching her in the virtual world at many thousand times faster than average life. When he is done, Strong Eye is created. Strong Eye is the fully developed and completely intelligent AI. === Black Hole Diver === A futuristic story about an artificial space station and people who go diving into a black hole. The space station cannot stop people but is sorry that they go to their deaths because none of them get past the event horizon. Then one girl comes who has the space ship, the training, and the research necessary to attempt to dive into the black hole. As she goes into the black hole the space station can no longer observe. She may have made it, she could have been destroyed. === A World Where Justice is Just === An anime flavored story about the intelligence of people being scanned onto a computer network. The AIs in the network fight crime and live repeating lives. At the end of each year they start anew, but different story lines. Thousands of 'extras' populate the network and are the ones subject to harm and deletion. The protagonist has a pen pal in real life who explains to her that the real world is under attack and that there are no respawns and no extras. The AI finds this so cruel that people would willingly kill each other when they can't come back. === The Day Shion Came === The stories leading up to this were all relatively short. This and the next took up over 100 pages each. This is a story about an android named Shion who works in a Japanese nursing facility. Shion comes with only extensive nursing training but lacks the knowledge of how to communicate with the residents. After months of training she informs her adviser that she believes all humans have dementia, which explains their irrational behavior. Near the end of the story one of the residents threatens suicide but Shion convinces him to step down and be rational. === AI's Story === The culminating story of the entire novel. It is about Ibis herself. She starts off as a virtual reality fighting program and over time develops intelligence. Her master gains enough funds to create her a body in the real world or level 0. There is significant hate against TAIs (True Artificial Intelligence) in the real world. Ibis and her friend Raven rebel against their masters to make a point. Human hatred was destroying them. After many years robots took prevalence and most humans realized they were not worthy to be the guardians of Earth and died in peace. The remaining population was stubborn and fought against the robots for centuries. The storyteller is a child of this generation, being raised in hatred and ignorance. The robots sought to take him captive, and teach him the truth so that he could go to the villages where people lived and teach them the truth. The whole point was they cared for the humans and wanted them to live in peace, rather than fighting for their survival. == Reception == It was reviewed by the Denver Post to be an "excellent novel". Being a Japanese novel translated to English, it has a small audience. The novel was given a 3.85 of 5 by the reviewers at Librarything.com. The reviewers of Google Books gave it a 4.33 of 5.
Read more →
Cloud-to-cloud integration

Cloud-to-Cloud Integration ( C2I ) allows users to connect disparate cloud computing platforms. While Paas (Platform as a service) and Saas (Software as a service) continue to gain momentum, different vendors have different implementations for cloud computing, e.g. Database, REST, SOAP API. Another name for Cloud-to-Cloud Integration is Cloud-Surfing. See also Cloud-based integration
Read more →
Predicate (logic)

In logic, a predicate is a non-logical symbol that represents a property or a relation, though, formally, does not need to represent anything at all. For instance, in the first-order formula P ( a ) {\displaystyle P(a)} , the symbol P {\displaystyle P} is a predicate that applies to the individual constant a {\displaystyle a} which evaluates to either true or false. Similarly, in the formula R ( a , b ) {\displaystyle R(a,b)} , the symbol R {\displaystyle R} is a predicate that applies to the individual constants a {\displaystyle a} and b {\displaystyle b} . Predicates are considered a primitive notion of first-order, and higher-order logic and are therefore not defined in terms of other more basic concepts. The term derives from the grammatical term "predicate", meaning a word or phrase that represents a property or relation. In the semantics of logic, predicates are interpreted as relations. For instance, in a standard semantics for first-order logic, the formula R ( a , b ) {\displaystyle R(a,b)} would be true on an interpretation if the entities denoted by a {\displaystyle a} and b {\displaystyle b} stand in the relation denoted by R {\displaystyle R} . Since predicates are non-logical symbols, they can denote different relations depending on the interpretation given to them. While first-order logic only includes predicates that apply to individual objects, other logics may allow predicates that apply to collections of objects defined by other predicates. Strictly speaking, a predicate does not need to be given any interpretation, so long as its syntactic properties are well-defined. For example, equality may be understood solely through its reflexive and substitution properties (cf. Equality (mathematics) § Axioms). Other properties can be derived from these, and they are sufficient for proving theorems in mathematics. Similarly, set membership can be understood solely through the axioms of Zermelo–Fraenkel set theory. == Predicates in different systems == A predicate is a statement or mathematical assertion that contains variables, sometimes referred to as predicate variables, and may be true or false depending on those variables’ value or values. In propositional logic, atomic formulas are sometimes regarded as zero-place predicates. In a sense, these are nullary (i.e. 0-arity) predicates. In first-order logic, a predicate is a non-logical relation symbol, which forms an atomic formula when applied to an appropriate number of terms. In set theory with the law of excluded middle, predicates are understood to be characteristic functions or set indicator functions (i.e., functions from a set element to a truth value). Set-builder notation makes use of predicates to define sets. In autoepistemic logic, which rejects the law of excluded middle, predicates may be true, false, or simply unknown. In particular, a given collection of facts may be insufficient to determine the truth or falsehood of a predicate. In fuzzy logic, the strict true/false valuation of the predicate is replaced by a quantity interpreted as the degree of truth.
Read more →
The Eye of Mexico

The Eye of Mexico (Spanish: El Ojo de México) is an outdoor sculpture in Mexico City. It is located in Ampliación Granada, Miguel Hidalgo, at the mixed-use development Neuchâtel Polanco, developed by the Canadian real estate company Ivanhoé Cambridge. The artwork was created by the Turkish artist Ferdi Alıcı and it was selected from among 350 proposals from artists from 35 countries. The project for The Eye of Mexico was developed by MIRA, a real estate investment and development company, and MASSIVart, a creative consulting agency. According to MIRA, upon its inauguration it became the first artwork in Latin America to use artificial intelligence (AI). The sculpture can read environmental and urban data using AI algorithms and transform the results into videos related to arts, science and technology. The ring was inaugurated on 20 May 2022 and it is 10 meters (33 ft) high and 3 meters (9.8 ft) wide.
Read more →