AI Grammar Checker And Rephraser Free

AI Grammar Checker And Rephraser Free — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

NASA AI Assisted-Air Quality Monitoring Project

The NASA Expert-System Ion Trap Mass Spectrometer (ES-ITMS) Project was a public-private partnership to develop an artificial intelligence assisted, air quality monitoring system and was qualified for use on the Space Shuttle. The partnership was also the first cost and intellectual property shared public-partnership implemented by NASA, which used the commercial Research and Development Limited Partnership (RDLP) model that had been adopted by the Reagan Administration for Department of Defense semiconductor development, and recommended for use by NASA for space commercialization. The project partners included NASA, the University of Florida and Finnigan MAT Corporation, was organized and administered by the NASA Joint Enterprise Institute (subsequently NASA Joint Sponsored Program) and ran from 1988 through 1990. The partnership concluded final testing in 1991, generating four patents, expert system software and application protocol reports. The system was space qualified for use on the Shuttle and elements of the ES-ITMS system were integrated into the product Improvements for Finnigan MAT corporation. The success of the partnership lead NASA to create a pilot program to develop partnership business models as an ongoing management practice. == Purpose and objectives == The need to monitor air quality in confined spaces represented an increasing challenge for NASA's planned space missions and private sector facility managers facing the increased scrutiny of possible air contaminants. Up to the early 1980's, air quality monitors generally required large spaces and human technicians to interpret readings. This created a need for miniaturized air quality monitors that could generate reliable and accurate analytic results without on-site technician presence. NASA initiated projects to develop..."mobile and/or portable mass spectrometers" that evaluated the "tradeoff between instrumentation capabilities and space, weight and power considerations." NASA selected a "commercial ITMS instrument capable of generating electron ionization, chemical ionization and mass spectrometry data", to develop a linked expert system to accomplish analysis without human intervention. The commercial instrumentation was from Finnigan MAT corporation while the scientific expertise to support expert system development was available at the University of Florida. The project managers at NASA Ames created a single, integrated project using the RDLP model with objectives to: Develop AI/expert system software for instrument control (NASA's role) Expand sensitivity, selectivity and speed of the spectrometer (Univ Florida role) Expand the spectrometer analytic capability and automate the screening (Finnigan role) == Membership == The partnership included seven specialists from five member organizations: Federal Government National Aeronautics and Space Administration (NASA) NASA Ames Research Center (ARC) NASA Kennedy Space Center (KSC) Commercial Finnigan MAT Corporation (Thermo-Fisher Scientific) TGS Technology, Inc. Research Management University of Florida == Organization, management and administration == The technical project was organized into two development teams, one located in at the NASA Ames Research Center covering expert systems and analytic capabilities and one in Florida covering improved sensitivity and testing. The partnership management and administration was provided by a non-profit, partnership support organization: the Joint Enterprise Institute operating through San Francisco State University Foundation (SFSUF) with a NASA employee liaison, Syed Shariq. == Public-private partnership == The partnership structure was as a prototype test of a pilot NASA program to develop public-private partnership business models. The pilot program was known as the NASA Joint Sponsored Research Program (JSRP), which operated as the NASA Joint Enterprise Institute between 1988 and 1991. The partnership was the first public-private, research and development partnership implemented by NASA in response to national policy shifts to increase technology transfer and space commercialization. The partnership structure included a two year technology development and testing plan that cost $610,000, of which NASA funded $310,000, Finnigan $175,000 and the University of Florida $95,000. == Results and commercialization == The project generated patents (4), software (2) and application protocol reports (8). NASA gained use of the patents and jointly development software while Finnigan received commercial utilization rights. The results were commercialized within eighteen months of project completion. == Recognition == NASA recognized the project as a space qualified instrument. Its achievements were reported to the NASA Administrator, directly leading to establishment of the agency-wide Joint Sponsored Research Program.
Read more →
Artificial intelligence in government

Artificial intelligence (AI) has a range of uses in government. It can be used to further public policy objectives (in areas such as emergency services, health and welfare), as well as assist the public to interact with the government (through the use of virtual assistants, for example). According to the Harvard Business Review, "Applications of artificial intelligence to the public sector are broad and growing, with early experiments taking place around the world." Hila Mehr from the Ash Center for Democratic Governance and Innovation at Harvard University notes that AI in government is not new, with postal services using machine methods in the late 1990s to recognise handwriting on envelopes to automatically route letters. The use of AI in government comes with significant benefits, including efficiencies resulting in cost savings (for instance by reducing the number of front office staff) and reducing the opportunities for corruption. However, it also carries risks (described below). == Uses of AI in government == The potential uses of AI in government are wide and varied, with Deloitte considering that "Cognitive technologies could eventually revolutionize every facet of government operations". Mehr suggests that six types of government problems are appropriate for AI applications: Resource allocation—such as where administrative support is required to complete tasks more quickly. Large datasets—where these are too large for employees to work efficiently and multiple datasets could be combined to provide greater insights. Expert shortage—including where basic questions could be answered and niche issues can be learned. Predictable scenario—historical data makes the situation predictable. Procedural tasks refer to repetitive tasks in which the answers to inputs or outputs are binary. Diverse data—where data takes various forms (such as visual and linguistic) and needs to be summarized regularly. Mehr states that "While applications of AI in government work have not kept pace with the rapid expansion of AI in the private sector, the potential use cases in the public sector mirror common applications in the private sector." Potential and actual uses of AI in government can be divided into three broad categories: those that contribute to public policy objectives, those that assist public interactions with the government, and other uses. === Contributing to public policy objectives === There are a range of examples of where AI can contribute to public policy objectives. These include: Receiving benefits at job loss, retirement, bereavement and child birth almost immediately, in an automated way (thus without requiring any actions from citizens at all) Social insurance service provision Classifying emergency calls based on their urgency (like the system used by the Cincinnati Fire Department in the United States) Detecting and preventing the spread of diseases Assisting public servants in making welfare payments and immigration decisions Adjudicating bail hearings Triaging health care cases Monitoring social media for public feedback on policies Monitoring social media to identify emergency situations Identifying fraudulent benefits claims Predicting a crime and recommending optimal police presence Predicting traffic congestion and car accidents Anticipating road maintenance requirements Identifying breaches of health regulations Providing personalised education to students Marking exam papers Assisting with defence and national security (see Artificial intelligence § Military and Applications of artificial intelligence § Other fields in which AI methods are implemented respectively) Artificial Intelligence in China has been used to drive both political and economic markets. In 2019, Shanghai’s government rolled out 100 billion yuan to assist in funding enterprises that used AI to introduce 22 new policy agendas. Shanghai invested in these enterprises to attract top international talent in order to set up the Shanghai Municipal Big Data Center. City Brain AI is an urban management platform made by Alibaba. China uses City Brain AI to maintain a significant share of capital investment through public and state owned enterprises. The synergy between public and private sectors are more than capital-driven with City Brain AI. The blend of both public and private shareholding is only made out to be through the role of provincial and sub-provincial governments. Both hold control over the direction that City Brain AI makes both socially and economically. === Assisting public interactions with government === AI can be used to assist members of the public to interact with government and access government services, for example by: Answering questions using virtual assistants or chatbots (see below) Directing requests to the appropriate area within government Filling out forms Assisting with searching documents (e.g. IP Australia's trade mark search) Scheduling appointments Various governments, including those of Australia and Estonia, have implemented virtual assistants to aid citizens in navigating services, with applications ranging from tax inquiries to life-event registrations. === Gerrymandering === Gerrymandering is a method of influencing political process by drawing map boundaries in favor of incumbent parties. Academic researchers Wendy Tam Cho and Bruce Cain have proposed partially automating the map-drawing process with an AI system to reduce partisan gerrymandering. Even with this AI system, the process may still be manipulated to favor partisan interests, so the researchers emphasized the importance of transparency and human involvement. === Other uses === Other uses of AI in government include: Translation Language interpretation pioneered by the European Commission's Directorate General for Interpretation and Florika Fink-Hooijer. Drafting documents == Potential benefits == AI offers potential efficiencies and cost savings for the government. For example, Deloitte has estimated that automation could save US Government employees between 96.7 million to 1.2 billion hours a year, resulting in potential savings of between $3.3 billion to $41.1 billion a year. The Harvard Business Review has stated that while this may lead a government to reduce employee numbers, "Governments could instead choose to invest in the quality of its services. They can re-employ workers' time towards more rewarding work that requires lateral thinking, empathy, and creativity—all things at which humans continue to outperform even the most sophisticated AI program." == Risks == Risks associated with the use of AI in government include AI becoming susceptible to bias, a lack of transparency in how an AI application may make decisions, and the accountability for any such decisions. For example, a 2026 lawsuit alleged that the U.S. Department of Government Efficiency used ChatGPT to flag and cancel federal humanities grants, including projects on Jewish history and Israeli culture, over some objections from NEH officials, illustrating how automated decision-making could affect funding outcomes.
Read more →
Divide-and-conquer algorithm

In computer science, divide and conquer is an algorithm design paradigm. A divide-and-conquer algorithm recursively breaks down a problem into two or more sub-problems of the same or related type, until these become simple enough to be solved directly. The solutions to the sub-problems are then combined to give a solution to the original problem. The divide-and-conquer technique is the basis of efficient algorithms for many problems, such as sorting (e.g., quicksort, merge sort), multiplying large numbers (e.g., the Karatsuba algorithm), finding the closest pair of points, syntactic analysis (e.g., top-down parsers), SAT solving, and computing the discrete Fourier transform (FFT). Designing efficient divide-and-conquer algorithms can be difficult. As in mathematical induction, it is often necessary to generalize the problem to make it amenable to a recursive solution. The correctness of a divide-and-conquer algorithm is usually proved by mathematical induction, and its computational cost is often determined by solving recurrence relations. == Divide and conquer == The divide-and-conquer paradigm is often used to find an optimal solution of a problem. Its basic idea is to decompose a given problem into two or more similar, but simpler, subproblems, to solve them in turn, and to compose their solutions to solve the given problem. Problems of sufficient simplicity are solved directly. For example, to sort a given list of n natural numbers, split it into two lists of about n/2 numbers each, sort each of them in turn, and interleave both results appropriately to obtain the sorted version of the given list (see the picture). This approach is known as the merge sort algorithm. The name "divide and conquer" is sometimes applied to algorithms that reduce each problem to only one sub-problem, such as the binary search algorithm for finding a record in a sorted list (or its analogue in numerical computing, the bisection algorithm for root finding). These algorithms can be implemented more efficiently than general divide-and-conquer algorithms; in particular, if they use tail recursion, they can be converted into simple loops. Under this broad definition, however, every algorithm that uses recursion or loops could be regarded as a "divide-and-conquer algorithm". Therefore, some authors consider that the name "divide and conquer" should be used only when each problem may generate two or more subproblems. The name decrease and conquer has been proposed instead for the single-subproblem class. An important application of divide and conquer is in optimization, where if the search space is reduced ("pruned") by a constant factor at each step, the overall algorithm has the same asymptotic complexity as the pruning step, with the constant depending on the pruning factor (by summing the geometric series); this is known as prune and search. == Early historical examples == Early examples of these algorithms are primarily decrease and conquer – the original problem is successively broken down into single subproblems, and indeed can be solved iteratively. Binary search, a decrease-and-conquer algorithm where the subproblems are of roughly half the original size, has a long history. While a clear description of the algorithm on computers appeared in 1946 in an article by John Mauchly, the idea of using a sorted list of items to facilitate searching dates back at least as far as Babylonia in 200 BC. Another ancient decrease-and-conquer algorithm is the Euclidean algorithm to compute the greatest common divisor of two numbers by reducing the numbers to smaller and smaller equivalent subproblems, which dates to several centuries BC. An early example of a divide-and-conquer algorithm with multiple subproblems is Gauss's 1805 description of what is now called the Cooley–Tukey fast Fourier transform (FFT) algorithm, although he did not analyze its operation count quantitatively, and FFTs did not become widespread until they were rediscovered over a century later. An early two-subproblem D&C algorithm that was specifically developed for computers and properly analyzed is the merge sort algorithm, invented by John von Neumann in 1945. Another notable example is the algorithm invented by Anatolii A. Karatsuba in 1960 that could multiply two n-digit numbers in O ( n log 2 ⁡ 3 ) {\displaystyle O(n^{\log _{2}3})} operations (in Big O notation). This algorithm disproved Andrey Kolmogorov's 1956 conjecture that Ω ( n 2 ) {\displaystyle \Omega (n^{2})} operations would be required for that task. As another example of a divide-and-conquer algorithm that did not originally involve computers, Donald Knuth gives the method a post office typically uses to route mail: letters are sorted into separate bags for different geographical areas, each of these bags is itself sorted into batches for smaller sub-regions, and so on until they are delivered. This is related to a radix sort, described for punch-card sorting machines as early as 1929. == Advantages == === Solving difficult problems === Divide and conquer is a powerful tool for solving conceptually difficult problems: all it requires is a way of breaking the problem into sub-problems, of solving the trivial cases, and of combining sub-problems to the original problem. Similarly, decrease and conquer only requires reducing the problem to a single smaller problem, such as the classic Tower of Hanoi puzzle, which reduces moving a tower of height n {\displaystyle n} to move a tower of height n − 1 {\displaystyle n-1} . === Algorithm efficiency === The divide-and-conquer paradigm often helps in the discovery of efficient algorithms. It was the key, for example, to Karatsuba's fast multiplication method, the quicksort and mergesort algorithms, the Strassen algorithm for matrix multiplication, and fast Fourier transforms. In all these examples, the D&C approach led to an improvement in the asymptotic cost of the solution. For example, if (a) the base cases have constant-bounded size, the work of splitting the problem and combining the partial solutions is proportional to the problem's size n {\displaystyle n} , and (b) there is a bounded number p {\displaystyle p} of sub-problems of size ~ n p {\displaystyle {\frac {n}{p}}} at each stage, then the cost of the divide-and-conquer algorithm will be O ( n log p ⁡ n ) {\displaystyle O(n\log _{p}n)} . For other types of divide-and-conquer approaches, running times can also be generalized. For example, when a) the work of splitting the problem and combining the partial solutions take c n {\displaystyle cn} time, where n {\displaystyle n} is the input size and c {\displaystyle c} is some constant; b) when n < 2 {\displaystyle n<2} , the algorithm takes time upper-bounded by c {\displaystyle c} , and c) there are q {\displaystyle q} subproblems where each subproblem has size ~ n 2 {\displaystyle {\frac {n}{2}}} . Then, the running times are as follows: if the number of subproblems q > 2 {\displaystyle q>2} , then the divide-and-conquer algorithm's running time is bounded by O ( n log 2 ⁡ q ) {\displaystyle O(n^{\log _{2}q})} . if the number of subproblems is exactly one, then the divide-and-conquer algorithm's running time is bounded by O ( n ) {\displaystyle O(n)} . If, instead, the work of splitting the problem and combining the partial solutions take c n 2 {\displaystyle cn^{2}} time, and there are 2 subproblems where each has size n 2 {\displaystyle {\frac {n}{2}}} , then the running time of the divide-and-conquer algorithm is bounded by O ( n 2 ) {\displaystyle O(n^{2})} . === Parallelism === Divide-and-conquer algorithms are naturally adapted for execution in multi-processor machines, especially shared-memory systems where the communication of data between processors does not need to be planned in advance because distinct sub-problems can be executed on different processors. === Memory access === Divide-and-conquer algorithms naturally tend to make efficient use of memory caches. The reason is that once a sub-problem is small enough, it and all its sub-problems can, in principle, be solved within the cache, without accessing the slower main memory. An algorithm designed to exploit the cache in this way is called cache-oblivious, because it does not contain the cache size as an explicit parameter. Moreover, D&C algorithms can be designed for important algorithms (e.g., sorting, FFTs, and matrix multiplication) to be optimal cache-oblivious algorithms–they use the cache in a probably optimal way, in an asymptotic sense, regardless of the cache size. In contrast, the traditional approach to exploiting the cache is blocking, as in loop nest optimization, where the problem is explicitly divided into chunks of the appropriate size—this can also use the cache optimally, but only when the algorithm is tuned for the specific cache sizes of a particular machine. The same advantage exists with regards to other hierarchical storage systems, such as NUMA or virtual memory, as well as for multip
Read more →
Outline of artificial intelligence

The following outline is provided as an overview of and topical guide to artificial intelligence: Artificial intelligence (AI) is intelligence exhibited by machines or software. It is also the name of the scientific field which studies how to create computers and computer software that are capable of intelligent behavior. == AI terminology == Glossary of artificial intelligence == Goals and applications == === General intelligence === Artificial general intelligence AI-complete === Reasoning and problem solving === Automated reasoning Mathematics Automated theorem prover Computer-assisted proof – Computer algebra General Problem Solver Expert system – Decision support system – Clinical decision support system – === Knowledge representation === Knowledge representation Knowledge management Cyc === Planning === Automated planning and scheduling Strategic planning Sussman anomaly – === Learning === Machine learning – Constrained Conditional Models – Deep learning – Neural modeling fields – Supervised learning – Weak supervision (semi-supervised learning) – Unsupervised learning – === Natural language processing === Natural language processing (outline) – Chatterbots – Language identification – Large language model – Retrieval-augmented generation – Natural language user interface – Natural language understanding – Machine translation – Statistical semantics – Question answering – Semantic translation – Concept mining – Data mining – Text mining – Process mining – E-mail spam filtering – Information extraction – Named-entity extraction – Coreference resolution – Named-entity recognition – Relationship extraction – Terminology extraction – === Perception === Machine perception Pattern recognition – Computer Audition – Speech recognition – Speaker recognition – Computer vision (outline) – Image processing Intelligent word recognition – Object recognition – Optical mark recognition – Handwriting recognition – Optical character recognition – Automatic number plate recognition – Information extraction – Image retrieval – Automatic image annotation – Facial recognition systems – Silent speech interface – Activity recognition – Percept (artificial intelligence) === Robotics === Robotics – Behavior-based robotics – Cognitive – Cybernetics – Developmental robotics – Evolutionary robotics – === Control === Intelligent control Self-management (computer science) – Autonomic Computing – Autonomic Networking – === Social intelligence === Affective computing Kismet === Game playing === Game artificial intelligence – Computer game bot – computer replacement for human players. Video game AI – Computer chess – Computer Go – General game playing – General video game playing – === Creativity, art and entertainment === Artificial creativity Artificial life Artificial intelligence art AI anthropomorphism AI agent AI web browser AI boom AI slop Creative computing Generative artificial intelligence Generative pre trained transformer Uncanny valley Music and artificial intelligence Computational humor Chatbot === Integrated AI systems === AIBO – Sony's robot dog. It integrates vision, hearing and motorskills. Asimo (2000 to present) – humanoid robot developed by Honda, capable of walking, running, negotiating through pedestrian traffic, climbing and descending stairs, recognizing speech commands and the faces of specific individuals, among a growing set of capabilities. MIRAGE – A.I. embodied humanoid in an augmented reality environment. Cog – M.I.T. humanoid robot project under the direction of Rodney Brooks. QRIO – Sony's version of a humanoid robot. TOPIO, TOSY's humanoid robot that can play ping-pong with humans. Watson (2011) – computer developed by IBM that played and won the game show Jeopardy! It is now being used to guide nurses in medical procedures. Purpose: Open domain question answering Technologies employed: Natural language processing Information retrieval Knowledge representation Automated reasoning Machine learning Project Debater (2018) – artificially intelligent computer system, designed to make coherent arguments, developed at IBM's lab in Haifa, Israel. === Intelligent personal assistants === Intelligent personal assistant – Amazon Alexa – Assistant – Braina – Cortana – Google Assistant – Google Now – Mycroft – Siri – Viv – === Other applications === Artificial life – simulation of natural life through the means of computers, robotics, or biochemistry. Automatic target recognition – Diagnosis (artificial intelligence) – Speech generating device – Vehicle infrastructure integration – Virtual Intelligence – == History == History of artificial intelligence Progress in artificial intelligence Timeline of artificial intelligence AI effect – as soon as AI successfully solves a problem, the problem is no longer considered by the public to be a part of AI. This phenomenon has occurred in relation to every AI application produced, so far, throughout the history of development of AI. AI winter – a period of disappointment and funding reductions occurring after a wave of high expectations and funding in AI. Such funding cuts occurred in the 1970s, for instance. Moore's law === History by period === 2017 in artificial intelligence 2018 in artificial intelligence 2019 in artificial intelligence 2020 in artificial intelligence 2021 in artificial intelligence 2022 in artificial intelligence 2023 in artificial intelligence 2024 in artificial intelligence 2025 in artificial intelligence 2026 in artificial intelligence 2027 in artificial intelligence 2028 in artificial intelligence 2029 in artificial intelligence === History by subject === History of logic (formal reasoning is an important precursor of AI) History of machine learning (timeline) History of machine translation (timeline) History of natural language processing History of optical character recognition (timeline) == AI algorithms and techniques == === Search === Discrete search algorithms Uninformed search Brute force search – Problem-solving technique and algorithmic paradigmPages displaying short descriptions of redirect targets Search tree – Data structure in tree form sorted for fast lookup Breadth-first search – Algorithm to search the nodes of a graph Depth-first search – Algorithm to search the nodes of a graph State space search – Class of search algorithmsPages displaying short descriptions of redirect targets Informed search Best-first search – Graph exploring search algorithm A search algorithm – Algorithm used for pathfinding and graph traversal Heuristics – Problem-solving methodPages displaying short descriptions of redirect targets Pruning (algorithm) – Data compression techniquePages displaying short descriptions of redirect targets Adversarial search Minmax algorithm – Decision rule used for minimizing the possible loss for a worst-case scenarioPages displaying short descriptions of redirect targets Logic as search Production system (computer science) – Computer program used to provide artificial intelligence Rule based system – Type of computer systemPages displaying short descriptions of redirect targets Production rule – Computer program used to provide artificial intelligence Inference rule – Method of deriving conclusionsPages displaying short descriptions of redirect targets Horn clause – Type of logical formula Forward chaining – Inference engine in an expert system Backward chaining – Method of forming inferences Planning as search State space search – Class of search algorithmsPages displaying short descriptions of redirect targets Means–ends analysis – Problem solving technique === Optimization search === Optimization (mathematics) algorithms Hill climbing – Optimization algorithm Simulated annealing – Probabilistic optimization technique and metaheuristic Beam search – Heuristic search algorithm Random optimization – Optimization technique in mathematics Evolutionary computation Genetic algorithms – Competitive algorithm for searching a problem spacePages displaying short descriptions of redirect targets Gene expression programming – Evolutionary algorithm Genetic programming – Evolving computer programs with techniques analogous to natural genetic processes Differential evolution – Method of mathematical optimization Society based learning algorithms. Swarm intelligence – Collective behavior of decentralized, self-organized systems Particle swarm optimization – Iterative simulation method Ant colony optimization – Optimization algorithmPages displaying short descriptions of redirect targets Metaheuristic – Optimization technique === Logic === Logic and automated reasoning Programming using logic Logic programming – Programming paradigm based on formal logic See "Logic as search" above. Forms of Logic Propositional logic First-order logic First-order logic with equality Constraint satisfaction – Process in artificial intelligence and operations research Fuzzy logic Fuzzy set theory – Sets whose elements have degrees of membershipPages displaying short descriptions
Read more →
Nolot

Nolot is a chess test suite with 11 positions from real games. They were compiled by Pierre Nolot (French: [nɔ.lo]) for the French chess magazine Gambisco and posted on the rec.games.chess Usenet group in 1994. They were designed to be particularly hard to solve for chess engines to solve at the time, although modern engines can find a solution near-instantaneously. == Problem 1 == FEN: r3qb1k/1b4p1/p2pr2p/3n4/Pnp1N1N1/6RP/1B3PP1/1B1QR1K1 w - - 0 1 26.Nxh6!! c3 (26... Rxh6 27.Nxd6 Qh5 (best) 28.Rg5! Qxd1 29.Nf7+ Kg8 30.Nxh6+ Kh8 31.Rxd1 c3 32.Nf7+ Kg8 33.Bg6! Nf4 34.Bxc3 Nxg6 35.Bxb4 Kxf7 36.Rd7+ Kf6 37.Rxg6+ Kxg6 38.Rxb7 ±) 27.Nf5! cxb2 28.Qg4 Bc8 (28... g6!? 29.Kh2! 29.Qd7 30.Nh4 Bc6 31.Nc5! dxc 32.Rxe6 Nf6 33.Nxg6+ Kg7 34.Qg5 Nbd5 35.Ne5 Kh8 36.Nxd7 ±) 29.Qh4+ Rh6 30.Nxh6 gxh6 31.Kh2! Qe5 32.Ng5 Qf6 33.Re8 Bf5 34.Qxh6 (missing a mate in 6: 34.Nf7+ Qxf7 35.Qxh6+ Bh7 36.Rxa8 Nf6 37.Rxf8 Qxf8 38.Qxf8+ Ng8 39.Qg7#) 34...Qxh6 35.Nf7+ Kh7 36.Bxf5+ Qg6 37.Bxg6+ Kg7 38.Rxa8 Be7 39.Rb8 a5 40.Be4+ Kxf7 41.Bxd5+ 1–0 The best Novag computer, the Diablo 68000, finds 26. Nxh6 after seven and a half months (Pierre Nolot has let it run on the position for 14 months and one day, until a power failure stopped an analysis of over 80,000,000,000 nodes.) but for wrong reasons: it evaluates white's position as inferior and thinks this move would enable it to draw. Today Gambit Tiger 2.0 for example can find it quite quickly: Most free engines running on 64-bit processors in 2010 could solve this problem and the others in a few seconds. 1.Qd4 c3 2.Bxc3 Nxc3 3.Qxb4 Nxe4 4.Qxb7 Rb8 5.Qxb8 Qxb8 6.Bxe4 d5 7.Rb1 μ (-1.20) Depth: 12 00:00:09 6055 kN 1.Nxh6 c3 2.Nf5 cxb2 3.Qg4 Rb8 4.Nxg7 Rg6 5.Qxg6 Qxg6 6.Rxg6 Bxg7 7.Nxd6 ³ (-0.48) Depth: 12 00:00:21 14368 kN 1.Nxh6 c3 2.Nf5 cxb2 3.Qg4 Rc8 4.Nxg7 Rg6 5.Nxe8 Rxg4 6.Rxg4 Rxe8 7.Rg6 μ (-0.74) Depth: 13 00:00:55 38455 kN 1.Ne3 Rxe4 2.Bxe4 Qxe4 3.Nxd5 Qxd5 4.Qc1 Qf5 5.Qxh6+ Qh7 6.Qe6 Nd3 7.Re2 Nxb2 8.Rxb2 ³ (-0.58) Depth: 13 00:01:30 62979 kN 1.Ne3 Rxe4 ³ (-0.58) Depth: 14 00:02:02 84941 kN 1.Ne3 Nxe3 2.Rexe3 Bxe4 3.Qg4 Rg6 4.Qxe4 Qxe4 5.Bxe4 Rxg3 6.Rxg3 d5 7.Bf5 Re8 8.Bc3 ³ (-0.30) Depth: 15 00:03:05 128968 kN 1.Nxh6 ² (0.32) Depth: 15 00:07:58 350813 kN With the next ply showing a clear advantage. Stockfish 14dev 64bit 4CPU running on 2020 hardware recognises the significance of Nxh6!! in 1 second. Stockfish_21092606_x64_avx2: NNUE evaluation using nn-13406b1dcbe0.nnue enabled. 19/32 00:01 7708k 4882k +3,00 Nxh6 Rxh6 Nxd6 Qh5 Bg6 Qxd1 Nf7+ Kg8 Nxh6+ gxh6 Bh5+ Kh7 Rxd1 c3 Bxc3 Nxc3 Rd7+ Kh8 Rxb7 Ne4 Re3 Nxf2 Kxf2 Bc5 Ke2 Bxe3 Kxe3 Nd5+ Kf2 49/73 15:02 5118270k 5673k +6,15 Nxh6 Rxh6 Nxd6 Qh5 Rg5 Qxd1 Nf7+ Kg8 Nxh6+ Kh8 Rxd1 c3 Nf7+ Kg8 Bg6 Nf4 Bxc3 Nbd5 Rb1 Bc6 Bd2 Nxg6 Rxg6 Ne7 Rxc6 Nxc6 Rb6 Rc8 Ng5 a5 Ra6 Bb4 Be3 Ne5 Bd4 Nc6 Bb6 Bd2 h4 Kf8 Bc5+ Kg8 Be3 Bxe3 fxe3 Kf8 Kf2 Ke7 Nf3 Kd7 Rb6 Ne7 Rb5 Kd6 Rxa5 Rc2+ Kg3 Re2 Nd4 Rxe3+ Kf4 Rd3 Nf5+ Kc7 Nxe7 == Problem 2 == FEN: r4rk1/pp1n1p1p/1nqP2p1/2b1P1B1/4NQ2/1B3P2/PP2K2P/2R5 w - - 0 1 22.Rxc5!! Nxc5 23.Nf6+ Kh8 24.Qh4 Qb5+ (computers think there is perpetual check here, but...) 25.Ke3! 25... h5 26.Nxh5 Qxb3+ (26... d5+ 27.Bxd5 Qd3 28.Kf2 Ne4+ 29.Bxe4 Qd4+ 30.Kg2 Qxb2+ 31.Kh3 ±) and White won in 41 moves. Today Deep Junior 8.ZX for example finds it very quickly (around 1 minute): 1.Kd1 Rac8 2.Bh6 Qb5 3.Rc3 Qf1+ 4.Kc2 Rc6 5.Bxf8 −+ (-2.11) Depth: 12 00:00:04 10422 kN 1.Nxc5 Nxc5 2.Rxc5 Qxc5 3.e6 Rae8 4.e7 Nc8 5.Kf1 Nxd6 6.Bf6 b5 −+ (-2.10) Depth: 12 00:00:14 25054 kN 1.Bf6! μ (-1.35) Depth: 12 00:00:17 34601 kN 1.Bf6 Qb5+ 2.Ke1 Bb4+ 3.Kf2 Bc5+ = (0.00) Depth: 12 00:00:20 34601 kN 1.Bf6 Qb5+ 2.Ke1 Nxf6 3.Nxf6+ Kg7 4.Nh5+ gxh5 5.Qf6+ Kg8 6.Qg5+ Kh8 7.Qf6+ = (0.00) Depth: 15 00:01:01 130544 kN 1.Rxc5! = (0.15) Depth: 15 00:01:12 145875 kN 1.Rxc5 Nxc5 2.Nf6+ Kh8 3.Qh4 Qb5+ 4.Ke3 h5 5.Nxh5 Qd3+ 6.Kf2 Ne4+ 7.fxe4 Qd4+ 8.Kf1 Qd3+ 9.Ke1 Qb1+ 10.Bd1 ± (2.18) Depth: 15 00:01:18 145875 kN Stockfish 14dev 64bit 4CPU running on 2020 hardware recognises the significance of Rxc5!! in 1 second. Stockfish_21092606_x64_avx2: NNUE evaluation using nn-13406b1dcbe0.nnue enabled. 21/25 00:01 5822k 5545k +6,61 Rxc5 Qxc5 Nxc5 Nxc5 Bh6 Nbd7 Bxf8 Rxf8 Qe3 Rc8 f4 Nxe5 Qxe5 Ne6 Bxe6 Rc2+ Kd3 Rxh2 46/86 11:27 5057055k 7355k +7,61 Rxc5 Qxc5 Nxc5 Nxc5 Bf6 Ne6 Qh6 Nd4+ Kf2 Nf5 Qg5 Nd7 h4 Nxf6 Qxf6 Ng7 d7 b5 Bd5 Rab8 b4 Nh5 Bxf7+ Rxf7 d8R+ Rxd8 Qxd8+ Rf8 Qd5+ Kg7 e6 Kf6 Qd7 Ng7 Qd4+ Kxe6 Qxg7 Rf7 Qc3 Ke7 Qc5+ Ke8 Qc8+ Ke7 h5 gxh5 Kg3 h4+ Kh2 h6 Qc5+ Kf6 Qxb5 Kg7 f4 Rxf4 Qe5+ Rf6 b5 h3 Qd4 Kg8 Qxf6 h5 Blacks 22. .. Nxc5 is suboptimal and leads faster mate 77/44 09:18 6987714k 12518k +M22 Nf6+ Kh8 Qh4 Qb5+ Ke3 Qxb3+ axb3 h5 Nxh5 Nd5+ Kd4 Ne6+ Kxd5 Nxg5 Qxg5 gxh5 f4 Rad8 f5 f6 Qxh5+ Kg7 Qg6+ Kh8 e6 b6 e7 Rb8 exf8Q+ Rxf8 Ke6 b5 Ke7 Rb8 Qh5+ Kg7 Qf7+ Kh8 Kxf6 Rf8 Qxf8+ Kh7 Qg7+ == Problem 3 == FEN: r2qk2r/ppp1b1pp/2n1p3/3pP1n1/3P2b1/2PB1NN1/PP4PP/R1BQK2R w KQkq - 0 1 12.Nxg5!! Bxd1 13.Nxe6 Qb8 14.Nxg7+!! Kf8 15.Bh6! Bg4 16.0-0+ Kg8 17.Rf4 ± White wins with a queen sac but black has defensive resources. Stockfish 8 64bit 3CPU running on 2016 hardware recognizes the significance of Nxg5!! in 55 seconds. Stockfish 14 dev (Stockfish_21092606_x64_avx2) 64bit 4CPU running on 2020 hardware recognizes the significance of Nxg5!! in 1 second. NNUE evaluation using nn-13406b1dcbe0.nnue enabled. 21/34 00:01 8291k 4530k +2,78 Nxg5 Bxd1 Nxe6 Qb8 Nxg7+ Kd8 Kxd1 b5 N3f5 Bf8 Rf1 Kc8 Nh5 Kb7 Bxb5 Ne7 g4 a6 Ba4 Nxf5 gxf5 Ka7 Nf4 c5 47/59 37:49 10390430k 4578k +3,16 Nxg5 Bxd1 Nxe6 Qb8 Nxg7+ Kd8 Kxd1 b5 Rf1 Kc8 N3f5 Bf8 Ne6 Kd7 Nf4 Ne7 g4 a5 Ke2 Qb7 h4 Ra6 a3 Kc8 Be3 Kb8 Kf3 Rb6 Bd2 Qc8 Kg3 c5 Be3 c4 Nxe7 Bxe7 Bf5 Qd8 h5 Qg8 Kh3 Bg5 Rf3 Ra6 Raf1 b4 Nxd5 Qxd5 Bxg5 bxc3 bxc3 Rb6 Be3 Rb3 Blacks 14 .. Kf8 is suboptimal and leads loss fast 41/68 06:31 3269727k 8350k +9,28 Bh6 Kg8 Rxd1 Bf8 N3h5 Bxg7 Nxg7 Qf8 Nf5 Ne7 Bxf8 Nxf5 Bxf5 Rxf8 Be6+ Kg7 Rd3 Rf4 Bxd5 c6 Rg3+ Kf8 Rf3 Rxf3 Bxf3 Kg7 Rf1 Re8 Be4 Re6 Ke2 a5 Ke3 Rh6 h3 a4 Kf4 Re6 h4 Re8 Ke3 h6 h5 Rf8 Rxf8 Kxf8 == Problem 4 == FEN: r1b1kb1r/1p1n1ppp/p2ppn2/6BB/2qNP3/2N5/PPP2PPP/R2Q1RK1 w kq - 0 1 10.Nxe6!! Qxe6 11.Nd5 Kd8 12.Bg4 Qe5 13.f4 Qxe4 (13...Qxb2 stronger but not sufficient: 14.Bxd7 Bxd7 15.Rb1 Qa3 16.Nxf6 Bb5 17.Qd4 Qc5 18.Rfd1 ±) 14.Bxd7 Bxd7 15.Nxf6 gxf6 16.Bxf6+ Kc7 17.Bxh8 and Black resigned on move 27. Stockfish 14dev 64bit 4CPU running on 2020 hardware recognises the significance of 10.Nxe6 in 1 second. Stockfish_21092606_x64_avx2: NNUE evaluation using nn-13406b1dcbe0.nnue enabled. 22/37 00:01 6955k 5367k +4,00 Nxe6 Qxe6 Nd5 Kd8 Bg4 Qe5 f4 Qxb2 Rb1 Qa3 Bxd7 Bxd7 Nxf6 Bb5 Rf3 Qxa2 c4 Bxc4 Rf2 Qa5 Nd5+ f6 Nxf6 Kc7 Rc1 b5 Qd5 gxf6 Bxf6 Kb8 Rxc4 Qe1+ Rf1 51/70 47:10 14538911k 5137k +5,76 Nxe6 Qxe6 Nd5 Kd8 Bg4 Qe5 f4 Qxe4 Bxd7 Bxd7 Nxf6 Qf5 Qd4 Kc8 Nd5 Bc6 c4 f6 Nb6+ Kb8 Bh4 Be7 Rae1 Bd8 Nxa8 Kxa8 Bf2 Kb8 Qxd6+ Bc7 Ba7+ Kc8 Qe6+ Qxe6 Rxe6 h5 h4 Rd8 Re7 g6 Be3 Ba5 Kf2 Rd6 Rc1 Bd8 Rg7 Be4 Rg8 Kd7 c5 Rd3 Rc4 Bd5 Rg7+ Ke6 Rd4 Rxd4 Bxd4 Kf5 Rd7 Bc6 Rxd8 Kxf4 Bxf6 == Problem 5 == FEN: r2qrb1k/1p1b2p1/p2ppn1p/8/3NP3/1BN5/PPP3QP/1K3RR1 w - - 0 1 21.e5!! dxe5 22.Ne4! Nh5 23.Qg6!? (stronger is 23.Qg4!! Nf4 24.Nf3 Qc7 25.Nh4 ± ) 23...exd4? (23...Nf4 24.Rxf4! exf4 25.Nf3! Qb6 26.Rg5!! covering b5 and threatening Nf6 or Ne5-f7+) 24.Ng5 1−0 Stockfish 8 64bit 3CPU running on 2016 hardware recognises the significance of 21.e5 in 5 seconds. Stockfish 12 dev (Stockfish_20062212_x64_modern) 64bit 1CPU running on 2016 hardware recognizes the significance of 21.e5 in 11 seconds. 25/42 00:06 7 963k 1309k +6,93 e5 Nh5 Ne4 dxe5 Nf3 Nf4 Qg4 Qc7 Nh4 Bc6 Nf6 g5 Rxf4 exf4 Qh5 Qe7 Ng6+ Kg7 Nxe7 Rxe7 Ng4 37/62 03:12 298 083k 1545k +10,70 e5 Ng4 Qxg4 Qg5 Qh3 Qxe5 Nde2 g5 Rxf8+ Kg7 Rff1 Rf8 Re1 Qf5 Qg3 Rad8 Nd4 Qf4 Nxe6+ Bxe6 Rxe6 Qxg3 == Problem 6 == FEN: rnbqk2r/1p3ppp/p7/1NpPp3/QPP1P1n1/P4N2/4KbPP/R1B2B1R b kq - 0 1 13... axb5!! offers an exchange to keep the white queen out of play. 14.Qxa8 Bd4 15.Nxd4 cxd4 16.Qxb8 0-0! 17.Ke1 Qh4 18.g3 Qf6 19.Bf4 g5? (Ivanchuk found 19...d3! during post-game analysis.) 20.Rc1 exf4 21.Qxf4 Qd4 22.Rd1 bxc4 23.e5 Qc3+ 24.Rd2 Re8 25.Bxd3 cxd3 −+ Tasc R30 finds 19... d3! in 2 1/2 hours. 19... Bf5!! is even stronger than 19... d3. Position is already lost at 19... d3 +8.00 for black, ... Bf5 not much better Stockfish 14dev 64bit 4CPU running on 2020 hardware recognises the significance of axb5!! in 1 second. Stockfish_21092606_x64_avx2: NNUE evaluation using nn-13406b1dcbe0.nnue enabled. 21/28 00:01 9264k 4714k -1,22 axb5 Qxa8 Bd4 Nxd4 cxd4 h3 Nf6 Bg5 0-0 cxb5 h6 Bxf6 Qxf6 Re1 Nd7 Kd1 Qg6 Qa4 Qg3 Qc2 Qxa3 Bd3 Qxb4 Qb1 46/67 1:05:00 18113493k 4644k -2,40 axb5 Qxa8 Bd4 h3 Nf6 Nxd4 exd4 Kf2 Nxe4+ Kg1 Nd7 Bg5 Qxg5 Qxc8+ Ke7 Qc7 Qe5 d6+ Qxd6 Qxd6+ Kxd6 bxc5+ Ndxc5 cxb5 d3 h4 d2 Rh3 Ke5 Be2 f5 Ra2 Rd8 Bd1 Rd4 Re3 f4 Re2 b6 a4 Kd6 Rc2 Kd5 Ra2 h6 Rb2 Nxa4 Bxa4 Rxa4 Rexd2+ Nxd2 Rxd2+ Kc4 Rd7 g6 == Problem 7 == FEN 1r1bk2r/2R2ppp/p3p3/1b2P2q/4QP2/4N3/1B4PP/3R2K1 w k - 0 1 1.Rxd8+!! Rxd8 (1...Kxd8 2.Ra7! Qe2 3.Qd4+ Ke8 4.h3 Qe1+ 5.Kh2 Rd8 6.Qc5 Qh4 7.Ba3 Rd7 8.Ra8+ Rd8 9.g3 1−0)
Read more →
Documentation

Documentation is any communicable material that is used to describe, explain, or instruct regarding some attributes of an object, system, or procedure, such as its parts, assembly, installation, maintenance, and use. As a form of knowledge management and knowledge organization, documentation can be provided on paper, online, or on digital or analog media, such as audio tape or CDs. Examples of such resources include user guides, white papers, online help, and quick-reference guides. Paper or hard-copy documentation has become less common. Contemporary documentation is often distributed through websites, software products, and other online applications. Documentation, understood as a set of instructional materials, should not be confused with documentation science, which is the study of the recording and retrieval of information. == Principles for producing documentation == While associated International Organization for Standardization (ISO) standards are not easily available publicly, a guide from other sources for this topic may serve the purpose. Documentation development may involve document drafting, formatting, submitting, reviewing, approving, distributing, reposting and tracking, etc., and are convened by associated standard operating procedure in a regulatory industry. It could also involve creating content from scratch. Documentation should be easy to read and understand. If it is too long and too wordy, it may be misunderstood or ignored. Clear, concise words should be used, and sentences should be limited to a maximum of 15 words. Documentation intended for a general audience should avoid gender-specific terms and cultural biases. In a series of procedures, steps should be clearly numbered. == Producing documentation == Technical writers and corporate communicators are professionals whose field and work is documentation. Ideally, technical writers have a background in both the subject matter and also in writing, managing content, and information architecture. Technical writers more commonly collaborate with subject-matter experts, such as engineers, technical experts, medical professionals, etc. to define and then create documentation to meet the user's needs. Corporate communications includes other types of written documentation, for example: Market communications (MarCom): MarCom writers endeavor to convey the company's value proposition through a variety of print, electronic, and social media. This area of corporate writing is often engaged in responding to proposals. Technical communication (TechCom): Technical writers document a company's product or service. Technical publications can include user guides, installation and configuration manuals, and troubleshooting and repair procedures. Legal writing: This type of documentation is often prepared by attorneys or paralegals. Compliance documentation: This type of documentation codifies standard operating procedures, for any regulatory compliance needs, as for safety approval, taxation, financing, and technical approval. Healthcare documentation: This field of documentation encompasses the timely recording and validation of events that have occurred during the course of providing health care. == Documentation in computer science == === Types === The following are typical software documentation types: Request for proposal Requirements/statement of work/scope of work Software design and functional specification System design and functional specifications Change management, error and enhancement tracking User acceptance testing Manpages The following are typical hardware and service documentation types: Network diagrams Network maps Datasheet for IT systems (server, switch, e.g.) Service catalog and service portfolio (Information Technology Infrastructure Library) === Software Documentation Folder (SDF) tool === A common type of software document written in the simulation industry is the SDF. When developing software for a simulator, which can range from embedded avionics devices to 3D terrain databases by way of full motion control systems, the engineer keeps a notebook detailing the development "the build" of the project or module. The document can be a wiki page, Microsoft Word document or other environment. They should contain a requirements section, an interface section to detail the communication interface of the software. Often a notes section is used to detail the proof of concept, and then track errors and enhancements. Finally, a testing section to document how the software was tested. This documents conformance to the client's requirements. The result is a detailed description of how the software is designed, how to build and install the software on the target device, and any known defects and workarounds. This build document enables future developers and maintainers to come up to speed on the software in a timely manner, and also provides a roadmap to modifying code or searching for bugs. === Software tools for network inventory and configuration === These software tools can automatically collect data of your network equipment. The data could be for inventory and for configuration information. The Information Technology Infrastructure Library requests to create such a database as a basis for all information for the IT responsible. It is also the basis for IT documentation. Examples include XIA Configuration. == Documentation in criminal justice == "Documentation" is the preferred term for the process of populating criminal databases. Examples include the National Counterterrorism Center's Terrorist Identities Datamart Environment, sex offender registries, and gang databases. == Documentation in early childhood education == Documentation, as it pertains to the early childhood education field, is "when we notice and value children's ideas, thinking, questions, and theories about the world and then collect traces of their work (drawings, photographs of the children in action, and transcripts of their words) to share with a wider community". Thus, documentation is a process, used to link the educator's knowledge and learning of the child/children with the families, other collaborators, and even to the children themselves. Documentation is an integral part of the cycle of inquiry - observing, reflecting, documenting, sharing and responding. Pedagogical documentation, in terms of the teacher documentation, is the "teacher's story of the movement in children's understanding". According to Stephanie Cox Suarez in "Documentation - Transforming our Perspectives", "teachers are considered researchers, and documentation is a research tool to support knowledge building among children and adults". Documentation can take many different styles in the classroom. The following exemplifies ways in which documentation can make the research, or learning, visible: Documentation panels (bulletin-board-like presentation with multiple pictures and descriptions about the project or event). Daily log (a log kept every day that records the play and learning in the classroom) Documentation developed by or with the children (when observing children during documentation, the child's lens of the observation is used in the actual documentation) Individual portfolios (documentation used to track and highlight the development of each child) Electronic documentation (using apps and devices to share documentation with families and collaborators) Transcripts or recordings of conversations (using recording in documentation can bring about deeper reflections for both the educator and the child) Learning stories (a narrative used to "describe learning and help children see themselves as powerful learners") The classroom as documentation (reflections and documentation of the physical environment of a classroom). Documentation is certainly a process in and of itself, and it is also a process within the educator. The following is the development of documentation as it progresses for and in the educator themselves: Develop(s) habits of documentation Become(s) comfortable with going public with recounting of activities Develop(s) visual literacy skills Conceptualize(s) the purpose of documentation as making learning styles visible, and Share(s) visible theories for interpretation purposes and further design of curriculum.
Read more →
In-place algorithm

In computer science, an in-place algorithm is an algorithm that operates directly on the input data structure without requiring extra space proportional to the input size. In other words, it modifies the input in place, without creating a separate copy of the data structure. An algorithm which is not in-place is sometimes called not-in-place or out-of-place. In-place can have slightly different meanings. In its strictest form, the algorithm can only have a constant amount of extra space, counting everything including function calls and pointers. However, this form is very limited as simply having an index to a length n array requires O(log n) bits. More broadly, in-place means that the algorithm does not use extra space for manipulating the input but may require a small though non-constant extra space for its operation. Usually, this space is O(log n), though sometimes anything in o(n) is allowed. Note that space complexity also has varied choices in whether or not to count the index lengths as part of the space used. Often, the space complexity is given in terms of the number of indices or pointers needed, ignoring their length. In this article, we refer to total space complexity (DSPACE), counting pointer lengths. Therefore, the space requirements here have an extra log n factor compared to an analysis that ignores the lengths of indices and pointers. An algorithm may or may not count the output as part of its space usage. Since in-place algorithms usually overwrite their input with output, no additional space is needed. When writing the output to write-only memory or a stream, it may be more appropriate to only consider the working space of the algorithm. In theoretical applications such as log-space reductions, it is more typical to always ignore output space (in these cases it is more essential that the output is write-only). == Examples == Given an array a of n items, suppose we want an array that holds the same elements in reversed order and to dispose of the original. One seemingly simple way to do this is to create a new array of equal size, fill it with copies from a in the appropriate order and then delete a. function reverse(a[0..n - 1]) allocate b[0..n - 1] for i from 0 to n - 1 b[n − 1 − i] := a[i] return b Unfortunately, this requires O(n) extra space for having the arrays a and b available simultaneously. Also, allocation and deallocation are often slow operations. Since we no longer need a, we can instead overwrite it with its own reversal using this in-place algorithm which will only need constant number (2) of integers for the auxiliary variables i and tmp, no matter how large the array is. function reverse_in_place(a[0..n-1]) for i from 0 to floor((n-2)/2) tmp := a[i] a[i] := a[n − 1 − i] a[n − 1 − i] := tmp As another example, many sorting algorithms rearrange arrays into sorted order in-place, including: bubble sort, comb sort, selection sort, insertion sort, heapsort, and Shell sort. These algorithms require only a few pointers, so their space complexity is O(log n). Quicksort operates in-place on the data to be sorted. However, quicksort requires O(log n) stack space pointers to keep track of the subarrays in its divide and conquer strategy. Consequently, quicksort needs O(log2 n) additional space. Although this non-constant space technically takes quicksort out of the in-place category, quicksort and other algorithms needing only O(log n) additional pointers are usually considered in-place algorithms. Most selection algorithms are also in-place, although some considerably rearrange the input array in the process of finding the final, constant-sized result. Some text manipulation algorithms such as trim and reverse may be done in-place. == In computational complexity == In computational complexity theory, the strict definition of in-place algorithms includes all algorithms with O(1) space complexity, the class DSPACE(1). This class is very limited; it equals the regular languages. In fact, it does not even include any of the examples listed above. Algorithms are usually considered in L, the class of problems requiring O(log n) additional space, to be in-place. This class is more in line with the practical definition, as it allows numbers of size n as pointers or indices. This expanded definition still excludes quicksort, however, because of its recursive calls. Identifying the in-place algorithms with L has some interesting implications; for example, it means that there is a (rather complex) in-place algorithm to determine whether a path exists between two nodes in an undirected graph, a problem that requires O(n) extra space using typical algorithms such as depth-first search (a visited bit for each node). This in turn yields in-place algorithms for problems such as determining if a graph is bipartite or testing whether two graphs have the same number of connected components. == Role of randomness == In many cases, the space requirements of an algorithm can be drastically cut by using a randomized algorithm. For example, if one wishes to know if two vertices in a graph of n vertices are in the same connected component of the graph, there is no known simple, deterministic, in-place algorithm to determine this. However, if we simply start at one vertex and perform a random walk of about 20n3 steps, the chance that we will stumble across the other vertex provided that it is in the same component is very high. Similarly, there are simple randomized in-place algorithms for primality testing such as the Miller–Rabin primality test, and there are also simple in-place randomized factoring algorithms such as Pollard's rho algorithm. == In functional programming == Functional programming languages often discourage or do not support explicit in-place algorithms that overwrite data, since this is a type of side effect; instead, they only allow new data to be constructed. However, good functional language compilers will often recognize when an object very similar to an existing one is created and then the old one is thrown away, and will optimize this into a simple mutation "under the hood". Note that it is possible in principle to carefully construct in-place algorithms that do not modify data (unless the data is no longer being used), but this is rarely done in practice.
Read more →
Five safes

The Five Safes is a framework for helping make decisions about making effective use of data which is confidential or sensitive. It is mainly used to describe or design research access to statistical data held by government and health agencies, and by data archives such as the UK Data Service. It is not an internationally accepted standard. Two of the Five Safes refer to statistical disclosure control, and so the Five Safes is usually used to contrast statistical and non-statistical controls when comparing data management options. == Concept == The Five Safes proposes that data management decisions be considered as solving problems in five 'dimensions': projects, people, settings, data and outputs. The combination of the controls leads to 'safe use'. These are most commonly expressed as questions, for example: These dimensions are scales, not limits. That is, solutions can have a mix of more or fewer controls in each dimension, but the overall aim of 'safe use' independent of the particular mix. For example, a public use file available for open download cannot control who uses it, where or for what purpose, and so all the control (protection) must be in the data itself. In contrast, a file which is only accessed through a secure environment with certified users can contain very sensitive information: the non-statistical controls allow the data to be 'unsafe'. One academic likened the process to a graphic equalizer, where bass and treble can be combined independently to produce a sound the listener likes, which has proven to be a very useful metaphor. This 2023 Data Foundation webinar is an expert discussion of how the elements interact, including an excellent introductory representation. There is no 'order' to the Five Safes, in that one is necessarily more important than the others. However, Ritchie argued that the 'managerial' controls (projects, people, setting) should be addressed before the 'statistical' controls (data, output). The Five Safes concept is associated with other topics which developed from the same programme at ONS, although these are not necessarily implemented. Safe people is associated with 'active researcher management', while safe outputs is linked with principles-based output statistical disclosure control. The Five Safes is a positive framework, describing what is and is not. The EDRU ('evidence-based, default-open, risk-managed, user-centred') attitudinal model is sometimes used to give a normative context == The 'data access spectrum' == From 2003 the Five Safes was also represented in a simpler form as a 'Data Access Spectrum'. The non-data controls (project, people, setting, outputs) tend to work together, in that organisations often see these as a complementary set of restrictions on access. These can then be contrasted with choices about data anonymisation to present a linear representation of data access options. This presentation is consistent with the idea of 'data as a residual', as well as data protection laws of the time which often characterised data simply as anonymous or not anonymous. A similar idea had already been developed independently in 2001 by Chuck Humphrey of the Canadian RDC network, the 'continuum of access'. More recently, The Open Data Institute has developed a 'Data Spectrum toolkit' which includes industry-specific examples. == History and terminology == The Five Safes was devised in the winter of 2002/2003 by Felix Ritchie at the UK Office for National Statistics (ONS) to describe its secure remote-access Virtual Microdata Laboratory (VML). It was described at this time as the 'VML Security Model'. This was adopted by the NORC data enclave, and more widely in the US, as the 'portfolio model' (although this is now also used to refer to a slightly different legal/statistical/educational breakdown). In 2012 the framework as was still being referred to as the 'VML security model', but its increasing use among non-UK organisations led to the adoption of the more general and informative phrase 'Five Safes'. The original framework only had four safes (projects, people, settings and outputs): the framework was used to describe highly detailed data access through a secure environment, and so the 'data' dimension was irrelevant. From 2007 onwards, 'safe data' was included as the framework was used to a describe a wider range of ONS activities. As the US version was based upon the 2005 specification, some US iterations uses have the original four dimensions (eg). Some discussions, such as the OECD, use the term 'secure' instead 'safe'. However, the use of both these terms can cause presentational problems: less control in a particular dimension could be seen to imply 'unsafe users' or 'insecure settings', for example, which distracts from the main message. Hence, the Australian government uses the term "five data sharing principles". The 'Anonymisation Decision-Making Framework' uses a framework based on the Five Safes but relabelling "projects", "people", and "settings" as "governance", "agency" and "infrastructure", respectively; "Output" is omitted, and "safe use" becomes "functional anonymisation". There is no reference to the Five Safes or any associated literature. The Australian version was required to include references to the Five Safes, and presented it as an alternative without comment. == Application == The framework has had three uses: pedagogical, descriptive, and design. Since 2016, it has also been used, directly and indirectly in legislation. See for more detailed examples. === Pedagogy === The first significant use of the framework, other than internal administrative use, was to structure researcher training courses at the UK Office for National Statistics from 2003. UK Data Archive, Administrative Data Research Network, Eurostat, Statistics New Zealand, the Mexican National Institute of Statistics and Geography, NORC, Statistics Canada and the Australian Bureau of Statistics, amongst others, have also used this framework. Most of these courses are for researchers using restricted-access facilities; the Eurostat courses are unusual in that they are designed for all users of sensitive data. === Description === The framework is often used to describe existing data access solutions (e.g. UK HMRC Data Lab, UK Data Service, Statistics New Zealand) or planned/conceptualised ones (e.g. Eurostat in 2011). An early use was to help identify areas where ONS' still had 'irreducible risks' in its provision of secure remote access. The framework is mostly used for confidential social science data. To date it appears to have made little impact on medical research planning, although it is now included in the revised guidelines on implementing HIPAA regulations in the US, and by Cancer Research UK and the Health Foundation in the UK. It has also been used to describe a security model for the Scottish Health Informatics Programme. === Design === In general the Five Safes has been used to describe solutions post-factum, and to explain/justify choices made, but an increasing number of organisations have used the framework to design data access solutions. For example, the Hellenic Statistical Agency developed a data strategy built around the Five Safes in 2016; the UK Health Foundation used the Five Safes to design its data management and training programmes. Use in the private sector is less common but some organisations have incorporated the Five Safes into consulting services. In 2015 the UK Data Service organized a workshop to encourage data users from the academic and private sectors to think about how to manage confidential research data, using the Five Safes to demonstrate alternative options and best practice. Early adopters for strategic design use were in Australia: both the Australian Bureau of Statistics and the Australian Department of Social Service used the Five Safes as an ex ante design tool. In 2017 the Australian Productivity Commission recommended adopting a version of the framework to support cross-government data sharing and re-use. This underwent extensive consultation and culminated in the DAT Act 2022. Since 2020 the Five Safes has been the overriding framework for the design of new secure facilities and data sharing arrangements in the UK for public health and social sciences. This has been promoted by the Office for Statistics Regulation, the UK Statistics Authority, NHS DIgital, and the research funding bodies Administrative Data Research UK and DARE UK. === Regulation and legislation === Three laws have incorporated the Fives Safes. They are explicit in the South Australian Public Sector (Data Sharing) Act 2016, and implicit in the research provisions of the UK Digital Economy Act 2017. The Australian Data Availability and Transparency Act 2022 renames the Five Safes as the Five Data Sharing Principles.A 2025 statutory review of the DAT Act 2022 found "that the DAT Act has not been effective in achieving its objectives.". The review includes specific referen
Read more →
QANDA

QANDA (stands for 'Q and A') is an AI-based learning platform developed by Mathpresso Inc., a South Korea-based education technology company. Its best known feature is a solution search, which uses optical character recognition technology to scan problems and provide step-by-step solutions and learning content. As of March 2024, QANDA solved over 6.3 billion questions. QANDA has 90 million total registered users and has reached 8 million monthly active users (MAU) in 50 countries. 90% of the cumulative users are from overseas such as Vietnam and Indonesia. In January 2024, its MathGPT, a math-specific small large language model set a new world record, surpassed Microsoft's 'ToRA 13B', the previous record holder in benchmarks assessing mathematical performance such as 'MATH' (high school math) and 'GSM8K' (grade school math). 'MathGPT' was co-developed with Upstage and KT. In March 2024, Mathpresso launched 'Cramify' (formerly known as Prep.Pie), an AI-powered study material generator designed to create personalized exam prep materials for U.S. college students. It uses generative AI to create customized study materials uploaded by students. Its features include a range of tools including study summarizer and question solver. == History == Co-founder Jongheun ‘Ray’ Lee first came up with the idea of QANDA during his freshman year in college. While he was tutoring to earn money, Lee realized that the quality of education a student receives is greatly based on their location. Lee saw his K-12 students were regularly asking similar questions and realized that these questions were from a pre-selected number of textbooks currently being used in schools. He decided to team up with his high school friend, Yongjae ‘Jake’ Lee to build a platform whereby, one uses a mobile app to scan and submit questions, and students can ask and receive detailed responses. Lee's school friends, Wonguk Jung and Hojae Jeong, joined the team. In June 2015, Mathpresso, Inc. was founded in Seoul, South Korea. In January 2016, Mathpresso's first product QANDA was launched. It supported a Q&A feature between students and tutors. In October 2017, QANDA introduced an AI-based search capability that permitted users to search for answers in seconds. In April 2020, Jake Yongjae Lee(CEO & co-founder) and Ray Jongheun Lee (co-founder) were selected as Forbes 30 under 30 Asia. In June 2021, QANDA raised $50 million in series C funding. Jake Yongjae Lee was recognized as an Innovator Under 35 by MIT Technology Review. In November 2021, QANDA secured a strategic investment from Google. Since its inception, it has received backing in Series C funding from investors namely Google, Yellowdog, GGV Capital, Goodwater Capital, KDB, and SKS Private Equity with participation from SoftBank Ventures Asia, Legend Capital, Mirae Asset Venture Investment, and Smilegate Investment. In September 2023, Mathpresso has raised $8 million (10 billion KRW) from Korea's telecom giant, KT. The total cumulative investment is about 130 million US dollars. The partnership aims to accelerate the development of an education-specific Large Language Model. The company intends to incorporate the LLM model to fortify its AI tutor, which later will be integrated into the existing services: QANDA App, B2B & B2G Saas, and 1:1 online tutoring (QANDA Tutor). == Features == QANDA features OCR-based solution search, one-on-one Q&A tutoring, a study timer. In 2021, QANDA launched additional features, including the premium subscription model that offers unlimited “byte-sized” micro-video lectures and the community feature that enhances collaborative learning. In 2021, QANDA launched QANDA Tutor, a tablet-based 1:1 tutoring service and QANDA Study, a 1:N online school in Vietnam. In 2022, QANDA launched an exam prep feature that offers past exam materials from school via online. This feature is currently available in South Korea. In August 2023, QANDA launched a beta version of an LLM-powered AI Tutor. == Awards and recognition == Best Hidden Gems of 2017 by Google Playstore 2018 AWS AI Startup Challenge Award National representative for the Google AI for Social Good APAC, 2018 Best Self-Improvement Apps of 2018 by Google Playstore GSV Edtech 150 — the Most Transformational Growth Companies in Digital Learning Speaker at the Google App Summit, 2021 Selected as a prospect unicorn company by Korea Technology Finance Corporation in 2023 Winner of G20-DIA Global Pitching in 2023 2021, 2022, 2023 East Asia EdTech 150 by HolonIQ
Read more →
Enumeration algorithm

In computer science, an enumeration algorithm is an algorithm that enumerates the answers to a computational problem. Formally, such an algorithm applies to problems that take an input and produce a list of solutions, similarly to function problems. For each input, the enumeration algorithm must produce the list of all solutions, without duplicates, and then halt. The performance of an enumeration algorithm is measured in terms of the time required to produce the solutions, either in terms of the total time required to produce all solutions, or in terms of the maximal delay between two consecutive solutions and in terms of a preprocessing time, counted as the time before outputting the first solution. This complexity can be expressed in terms of the size of the input, the size of each individual output, or the total size of the set of all outputs, similarly to what is done with output-sensitive algorithms. == Formal definitions == An enumeration problem P {\displaystyle P} is defined as a relation R {\displaystyle R} over strings of an arbitrary alphabet Σ {\displaystyle \Sigma } : R ⊆ Σ ∗ × Σ ∗ {\displaystyle R\subseteq \Sigma ^{}\times \Sigma ^{}} An algorithm solves P {\displaystyle P} if for every input x {\displaystyle x} the algorithm produces the (possibly infinite) sequence y {\displaystyle y} such that y {\displaystyle y} has no duplicate and z ∈ y {\displaystyle z\in y} if and only if ( x , z ) ∈ R {\displaystyle (x,z)\in R} . The algorithm should halt if the sequence y {\displaystyle y} is finite. == Common complexity classes == Enumeration problems have been studied in the context of computational complexity theory, and several complexity classes have been introduced for such problems. A very general such class is EnumP, the class of problems for which the correctness of a possible output can be checked in polynomial time in the input and output. Formally, for such a problem, there must exist an algorithm A which takes as input the problem input x, the candidate output y, and solves the decision problem of whether y is a correct output for the input x, in polynomial time in x and y. For instance, this class contains all problems that amount to enumerating the witnesses of a problem in the class NP. Other classes that have been defined include the following. In the case of problems that are also in EnumP, these problems are ordered from least to most specific: Output polynomial, the class of problems whose complete output can be computed in polynomial time. Incremental polynomial time, the class of problems where, for all i, the i-th output can be produced in polynomial time in the input size and in the number i. Polynomial delay, the class of problems where the delay between two consecutive outputs is polynomial in the input (and independent from the output). Strongly polynomial delay, the class of problems where the delay before each output is polynomial in the size of this specific output (and independent from the input or from the other outputs). The preprocessing is generally assumed to be polynomial. Constant delay, the class of problems where the delay before each output is constant, i.e., independent from the input and output. The preprocessing phase is generally assumed to be polynomial in the input. == Common techniques == Backtracking: The simplest way to enumerate all solutions is by systematically exploring the space of possible results (partitioning it at each successive step). However, performing this may not give good guarantees on the delay, i.e., a backtracking algorithm may spend a long time exploring parts of the space of possible results that do not give rise to a full solution. Flashlight search: This technique improves on backtracking by exploring the space of all possible solutions but solving at each step the problem of whether the current partial solution can be extended to a partial solution. If the answer is no, then the algorithm can immediately backtrack and avoid wasting time, which makes it easier to show guarantees on the delay between any two complete solutions. In particular, this technique applies well to self-reducible problems. Closure under set operations: If we wish to enumerate the disjoint union of two sets, then we can solve the problem by enumerating the first set and then the second set. If the union is non disjoint but the sets can be enumerated in sorted order, then the enumeration can be performed in parallel on both sets while eliminating duplicates on the fly. If the union is not disjoint and both sets are not sorted then duplicates can be eliminated at the expense of a higher memory usage, e.g., using a hash table. Likewise, the cartesian product of two sets can be enumerated efficiently by enumerating one set and joining each result with all results obtained when enumerating the second step. == Examples of enumeration problems == The vertex enumeration problem, where we are given a polytope described as a system of linear inequalities and we must enumerate the vertices of the polytope. Enumerating the minimal transversals of a hypergraph. This problem is related to monotone dualization and is connected to many applications in database theory and graph theory. Enumerating the answers to a database query, for instance a conjunctive query or a query expressed in monadic second-order. There have been characterizations in database theory of which conjunctive queries could be enumerated with linear preprocessing and constant delay. The problem of enumerating maximal cliques in an input graph, e.g., with the Bron–Kerbosch algorithm Listing all elements of structures such as matroids and greedoids Several problems on graphs, e.g., enumerating independent sets, paths, cuts, etc. Enumerating the satisfying assignments of representations of Boolean functions, e.g., a Boolean formula written in conjunctive normal form or disjunctive normal form, a binary decision diagram such as an OBDD, or a Boolean circuit in restricted classes studied in knowledge compilation, e.g., NNF. == Connection to computability theory == The notion of enumeration algorithms is also used in the field of computability theory to define some high complexity classes such as RE, the class of all recursively enumerable problems. This is the class of sets for which there exist an enumeration algorithm that will produce all elements of the set: the algorithm may run forever if the set is infinite, but each solution must be produced by the algorithm after a finite time.
Read more →
Knuth–Eve algorithm

In computer science, the Knuth–Eve algorithm is an algorithm for polynomial evaluation. It preprocesses the coefficients of the polynomial to reduce the number of multiplications required at runtime. Ideas used in the algorithm were originally proposed by Donald Knuth in 1962. His procedure opportunistically exploits structure in the polynomial being evaluated. In 1964, James Eve determined for which polynomials this structure exists, and gave a simple method of "preconditioning" polynomials (explained below) to endow them with that structure. == Algorithm == === Preliminaries === Consider an arbitrary polynomial p ∈ R [ x ] {\displaystyle p\in \mathbb {R} [x]} of degree n {\displaystyle n} . Assume that n ≥ 3 {\displaystyle n\geq 3} . Define m {\displaystyle m} such that: if n {\displaystyle n} is odd then n = 2 m + 1 {\displaystyle n=2m+1} , and if n {\displaystyle n} is even then n = 2 m + 2 {\displaystyle n=2m+2} . Unless otherwise stated, all variables in this article represent either real numbers or univariate polynomials with real coefficients. All operations in this article are done over R {\displaystyle \mathbb {R} } . Again, the goal is to create an algorithm that returns p ( x ) {\displaystyle p(x)} given any x {\displaystyle x} . The algorithm is allowed to depend on the polynomial p {\displaystyle p} itself, since its coefficients are known in advance. === Overview === ==== Key idea ==== Using polynomial long division, we can write p ( x ) = q ( x ) ⋅ ( x 2 − α ) + ( β x + γ ) , {\displaystyle p(x)=q(x)\cdot (x^{2}-\alpha )+(\beta x+\gamma ),} where x 2 − α {\displaystyle x^{2}-\alpha } is the divisor. Picking a value for α {\displaystyle \alpha } fixes both the quotient q {\displaystyle q} and the coefficients in the remainder β {\displaystyle \beta } and γ {\displaystyle \gamma } . The key idea is to cleverly choose α {\displaystyle \alpha } such that β = 0 {\displaystyle \beta =0} , so that p ( x ) = q ( x ) ⋅ ( x 2 − α ) + γ . {\displaystyle p(x)=q(x)\cdot (x^{2}-\alpha )+\gamma .} This way, no operations are needed to compute the remainder polynomial, since it's just a constant. We apply this procedure recursively to q {\displaystyle q} , expressing p ( x ) = ( ( q ( x ) ⋅ ( x 2 − α m ) + γ m ) ⋯ ) ⋅ ( x 2 − α 1 ) + γ 1 . {\displaystyle p(x)=\left(\left(q(x)\cdot (x^{2}-\alpha _{m})+\gamma _{m}\right)\cdots \right)\cdot (x^{2}-\alpha _{1})+\gamma _{1}.} After m {\displaystyle m} recursive calls, the quotient q {\displaystyle q} is either a linear or a quadratic polynomial. In this base case, the polynomial can be evaluated with (say) Horner's method. ==== "Preconditioning" ==== For arbitrary p {\displaystyle p} , it may not be possible to force β = 0 {\displaystyle \beta =0} at every step of the recursion. Consider the polynomials p e {\displaystyle p^{e}} and p o {\displaystyle p^{o}} with coefficients taken from the even and odd terms of p {\displaystyle p} respectively, so that p ( x ) = p e ( x 2 ) + x ⋅ p o ( x 2 ) . {\displaystyle p(x)=p^{e}(x^{2})+x\cdot p^{o}(x^{2}).} If every root of p o {\displaystyle p^{o}} is real, then it is possible to write p {\displaystyle p} in the form given above. Each α i {\displaystyle \alpha _{i}} is a different root of p o {\displaystyle p^{o}} , counting multiple roots as distinct. Furthermore, if at least n − 1 {\displaystyle n-1} roots of p {\displaystyle p} lie in one half of the complex plane, then every root of p o {\displaystyle p^{o}} is real. Ultimately, it may be necessary to "precondition" p {\displaystyle p} by shifting it — by setting p ( x ) ← p ( x + t ) {\displaystyle p(x)\gets p(x+t)} for some t {\displaystyle t} — to endow it with the structure that most of its roots lie in one half of the complex plane. At runtime, this shift has to be "undone" by first setting x ← x − t {\displaystyle x\gets x-t} . === Preprocessing step === The following algorithm is run once for a given polynomial p {\displaystyle p} . At this point, the values of x {\displaystyle x} that p {\displaystyle p} will be evaluated on are not known. ==== Better choice of t ==== While any t ≥ Re ( r 2 ) {\displaystyle t\geq {\text{Re}}(r_{2})} can work, it is possible to remove one addition during evaluation if t {\displaystyle t} is also chosen such that two roots of p ( x + t ) {\displaystyle p(x+t)} are symmetric about the origin. In that case, α 1 {\displaystyle \alpha _{1}} can be chosen such that the shifted polynomial has a factor of x 2 − α 1 {\displaystyle x^{2}-\alpha _{1}} , so γ 1 = 0 {\displaystyle \gamma _{1}=0} . It is always possible to find such a t {\displaystyle t} . One possible algorithm for choosing t {\displaystyle t} is: === Evaluation step === The following algorithm evaluates p {\displaystyle p} at some, now known, point x {\displaystyle x} . Assuming t {\displaystyle t} is chosen optimally, γ 1 = 0 {\displaystyle \gamma _{1}=0} . So, the final iteration of the loop can instead run y ← y ⋅ ( s − α i ) , {\displaystyle y\gets y\cdot (s-\alpha _{i}),} saving an addition. == Analysis == In total, evaluation using the Knuth–Eve algorithm for a polynomial of degree n {\displaystyle n} requires n {\displaystyle n} additions and ⌊ n / 2 ⌋ + 2 {\displaystyle \lfloor n/2\rfloor +2} multiplications, assuming t {\displaystyle t} is chosen optimally. No algorithm to evaluate a given polynomial of degree n {\displaystyle n} can use fewer than n {\displaystyle n} additions or fewer than ⌈ n / 2 ⌉ {\displaystyle \lceil n/2\rceil } multiplications during evaluation. This result assumes only addition and multiplication are allowed during both preprocessing and evaluation. The Knuth–Eve algorithm is not well-conditioned.
Read more →
OpenSMILE

openSMILE is source-available software for automatic extraction of features from audio signals and for classification of speech and music signals. "SMILE" stands for "Speech & Music Interpretation by Large-space Extraction". The software is mainly applied in the area of automatic emotion recognition and is widely used in the affective computing research community. The openSMILE project exists since 2008 and is maintained by the German company audEERING GmbH since 2013. openSMILE is provided free of charge for research purposes and personal use under a source-available license. For commercial use of the tool, the company audEERING offers custom license options. == Application Areas == openSMILE is used for academic research as well as for commercial applications in order to automatically analyze speech and music signals in real-time. In contrast to automatic speech recognition which extracts the spoken content out of a speech signal, openSMILE is capable of recognizing the characteristics of a given speech or music segment. Examples for such characteristics encoded in human speech are a speaker's emotion, age, gender, and personality, as well as speaker states like depression, intoxication, or vocal pathological disorders. The software further includes music classification technology for automatic music mood detection and recognition of chorus segments, key, chords, tempo, meter, dance-style, and genre. The openSMILE toolkit serves as benchmark in manifold research competitions such as Interspeech ComParE, AVEC, MediaEval, and EmotiW. == History == The openSMILE project was started in 2008 by Florian Eyben, Martin Wöllmer, and Björn Schuller at the Technical University of Munich within the European Union research project SEMAINE. The goal of the SEMAINE project was to develop a virtual agent with emotional and social intelligence. In this system, openSMILE was applied for real-time analysis of speech and emotion. The final SEMAINE software release is based on openSMILE version 1.0.1. In 2009, the emotion recognition toolkit (openEAR) was published based on openSMILE. "EAR" stands for "Emotion and Affect Recognition". In 2010, openSMILE version 1.0.1 was published and was introduced and awarded at the ACM Multimedia Open-Source Software Challenge. Between 2011 and 2013, the technology of openSMILE was extended and improved by Florian Eyben and Felix Weninger in the context of their doctoral thesis at the Technical University of Munich. The software was also applied for the project ASC-Inclusion, which was funded by the European Union. For this project, the software was extended by Erik Marchi in order to teach emotional expression to autistic children, based on automatic emotion recognition and visualization. In 2013, the company audEERING acquired the rights to the code-base from the Technical University of Munich and version 2.0 was published under a source-available research license. Until 2016, openSMILE was downloaded more than 50,000 times worldwide and has established itself as a standard toolkit for emotion recognition. == Awards == openSMILE was awarded in 2010 in the context of the ACM Multimedia Open Source Competition. The software tool is applied in numerous scientific publications on automatic emotion recognition. openSMILE and its extension openEAR have been cited in more than 1000 scientific publications until today.
Read more →
Smart object

A smart object is an object that enhances the interaction with not only people but also with other smart objects. Also known as smart connected products or smart connected things (SCoT), they are products, assets and other things embedded with processors, sensors, software and connectivity that allow data to be exchanged between the product and its environment, manufacturer, operator/user, and other products and systems. Connectivity also enables some capabilities of the product to exist outside the physical device, in what is known as the product cloud. The data collected from these products can be then analysed to inform decision-making, enable operational efficiencies and continuously improve the performance of the product. It can not only refer to interaction with physical world objects but also to interaction with virtual (computing environment) objects. A smart physical object may be created either as an artifact or manufactured product or by embedding electronic tags such as RFID tags or sensors into non-smart physical objects. Smart virtual objects are created as software objects that are intrinsic when creating and operating a virtual or cyber world simulation or game. The concept of a smart object has several origins and uses, see History. There are also several overlapping terms, see also smart device, tangible object or tangible user interface and Thing as in the Internet of things. == History == In the early 1990s, Mark Weiser, from whom the term ubiquitous computing originated, referred to a vision "When almost every object either contains a computer or can have a tab attached to it, obtaining information will be trivial", Although Weiser did not specifically refer to an object as being smart, his early work did imply that smart physical objects are smart in the sense that they act as digital information sources. Hiroshi Ishii and Brygg Ullmer refer to tangible objects in terms of tangibles bits or tangible user interfaces that enable users to "grasp & manipulate" bits in the center of users' attention by coupling the bits with everyday physical objects and architectural surfaces. The smart object concept was introduced by Marcelo Kallman and Daniel Thalmann as an object that can describe its own possible interactions. The main focus here is to model interactions of smart virtual objects with virtual humans, agents, in virtual worlds. The opposite approach to smart objects is 'plain' objects that do not provide this information. The additional information provided by this concept enables far more general interaction schemes, and can greatly simplify the planner of an artificial intelligence agent. In contrast to smart virtual objects used in virtual worlds, Lev Manovich focuses on physical space filled with electronic and visual information. Here, "smart objects" are described as "objects connected to the Net; objects that can sense their users and display smart behaviour". More recently in the early 2010s, smart objects are being proposed as a key enabler for the vision of the Internet of things. The combination of the Internet and emerging technologies such as near field communications, real-time localization, and embedded sensors enables everyday objects to be transformed into smart objects that can understand and react to their environment. Such objects are building blocks for the Internet of things and enable novel computing applications. In 2018, one of the world's first smart houses was built in Klaukkala, Finland in the form of a five-floor apartment block, using the Kone Residential Flow solution created by KONE, allowing even a smartphone to act as a home key. == Characteristics == Although we can view interaction with physical smart object in the physical world as distinct from interaction with virtual smart objects in a virtual simulated world, these can be related. Poslad considers the progression of: how humans use models of smart objects situated in the physical world to enhance human to physical world interaction; versus how smart physical objects situated in the physical world can model human interaction in order to lessen the need for human to physical world interaction; versus how virtual smart objects by modelling both physical world objects and modelling humans as objects and their subsequent interactions can form a predominantly smart virtual object environment. === Smart physical objects === The concept smart for a smart physical object simply means that it is active, digital, networked, can operate to some extent autonomously, is reconfigurable and has local control of the resources it needs such as energy, data storage, etc. Note, a smart object does not necessarily need to be intelligent as in exhibiting a strong essence of artificial intelligence—although it can be designed to also be intelligent. Physical world smart objects can be described in terms of three properties: Awareness: is a smart object's ability to understand (that is, sense, interpret, and react to) events and human activities occurring in the physical world. Representation: refers to a smart object's application and programming model—in particular, programming abstractions. Interaction: denotes the object's ability to converse with the user in terms of input, output, control, and feedback. Based upon these properties, these have been classified into three types: Activity-Aware Smart Objects: Are objects that can record information about work activities and its own use. Policy-Aware Smart Objects: Are objects that are activity-aware Objects can interpret events and activities with respect to predefined organizational policies. Process-Aware Smart Objects: Processes play a fundamental role in industrial work management and operation. A process is a collection of related activities or tasks that are ordered according to their position in time and space. === Smart virtual objects === For the virtual object in a virtual world case, an object is called smart when it has the ability to describe its possible interactions. This focuses on constructing a virtual world using only virtual objects that contain their own interaction information. There are four basic elements to constructing such a smart virtual object framework. Object properties: physical properties and a text description Interaction information: position of handles, buttons, grips, and the like Object behavior: different behaviors based on state variables Agent behaviors: description of the behavior an agent should follow when using the object Some versions of smart objects also include animation information in the object information, but this is not considered to be an efficient approach, since this can make objects inappropriately oversized. === Categorization === The terms smart, connected product or smart product can be confusing as it is used to cover a broad range of different products, ranging from smart home appliances (e.g., smart bathroom scales or smart light bulbs) to smart cars (e.g., Tesla). While these products share certain similarities, they often differ substantially in their capabilities. Raff et al. developed a conceptual framework that distinguishes different smart products based on their capabilities, which features 4 types of smart product archetypes (in ascending order of "smartness"). Digital Connected Responsive Intelligent == Advantages == Smart, connected products have three primary components: Physical – made up of the product's mechanical and electrical parts. Smart – made up of sensors, microprocessors, data storage, controls, software, and an embedded operating system with enhanced user interface. Connectivity – made up of ports, antennae, and protocols enabling wired/wireless connections that serve two purposes, it allows data to be exchanged with the product and enables some functions of the product to exist outside the physical device. Each component expands the capabilities of one another resulting in "a virtuous cycle of value improvement". First, the smart components of a product amplify the value and capabilities of the physical components. Then, connectivity amplifies the value and capabilities of the smart components. These improvements include: Monitoring of the product's conditions, its external environment, and its operations and usage. Control of various product functions to better respond to changes in its environment, as well as to personalize the user experience. Optimization of the product's overall operations based on actual performance data, and reduction of downtimes through predictive maintenance and remote service. Autonomous product operation, including learning from their environment, adapting to users' preferences and self-diagnosing and service. === The Internet of things (IoT) === The Internet of things is the network of physical objects that contain embedded technology to communicate and sense or interact with their internal states or the external environment. The phrase "Internet of things" reflects the gro
Read more →
Known-item search

Known-item search is a specialization of information exploration which represents the activities carried out by searchers who have a particular item in mind. In the context of library catalogs, known‐item search means a search for an item for which the author or title is known. Although the concept of known-item search originated in library science, it is now applied in the context of web search and other online search activities. Known-item search is distinguished from exploratory search, in which a searcher is unfamiliar with the domain of their search goal, unsure about the ways to achieve their goal, and/or unsure about what their goal is.
Read more →
World Congress of Universal Documentation

The World Congress of Universal Documentation was held from 16 to 21 August 1937 in Paris, France. Delegates from 45 countries met to discuss means by which all of the world's information, in print, in manuscript, and in other forms, could be efficiently organized and made accessible. == The Congress in the history of information science == The Congress, held at the Trocadéro under "the auspices" of the Institut International de Bibliographie, was "the apotheosis" of a general movement in the 1930s towards the classification of the growing mass of information and the improvement of access to that information. For the first time in the history of information science, technological means were beginning to catch up with theoretical ends, and the discussions at the conference reflected that fact. Its participation in the Congress was one of the first projects of the American Documentation Institute (ADI). Participants in the conference discussed what has been more recently called "a continuously updated hypertext encyclopedia." Joseph Reagle sees many of the ideas considered at the conference as forerunners of some of the key goals and norms of Wikipedia. == Microfilm == The main resolution adopted by the congress proposed that microfilm be used to make information universally available. Watson Davis, chairman of the American delegation and president of the ADI, stated that the volume of information being produced created difficult problems of access and preservation, but that these could be solved by the use of microfilm. In his address to the Congress, Davis said: Most immediate and practical to put into operation is the microfilming of material in libraries upon demand. It will become fashionable and economical to send a potential book borrower a little strip of microfilm for his permanent possession instead of the book and then badgering him to return it before he has had a chance to use it effectively. I believe that reading machines for microfilm will become as common as typewriters in studies and laboratories. If the principal libraries and information centers of the world will cooperate in such "bibliofilm services," as they are called, if they exchange orders and have essentially uniform methods, forms for ordering, standard microfilm format and production methods and comparable if not uniform prices, the resources of any library will be placed at the disposal of any scholar or scientist anywhere in the world. All the libraries cooperating will merge into one world library without loss of identity or individuality. The world's documentation will become available to even the most isolated and individualistic scholar. The Congress included two separate exhibits on microfilm. One was of the equipment used at the Bibliothèque nationale de France and the other, coordinated by Herman H. Fussler of the University of Chicago, consisting of "an entire microfilm laboratory," complete with cameras, a darkroom, and various kinds of reading machines. Emanuel Goldberg presented a paper on an early copying camera he had invented. Other resolutions passed by the Congress concerned uniform standards for the preparation of articles, for classifying books and other documents, for indexing newspapers and periodicals, and for cooperation between libraries. == H. G. Wells == In his address to the Congress, H. G. Wells said that he thought that his idea of the "world brain" was a precursor to the ideas other delegates were proposing, and explicitly linked the projects being discussed to the work of the encyclopédistes: I am speaking of a process of mental organization throughout the world which I believe to be as inevitable as anything can be in human affairs. All the distresses and horrors of the present time are fundamentally intellectual. The world has to pull its mind together, and this [Congress] is the beginning of its efforts. Civilization is a Phoenix. It perishes in flames and even as it dies it is born again. This synthesis of knowledge upon which you are working is the necessary beginning of a new world. It is good to be meeting here in Paris where the first encyclopedia of power was made. It would be impossible to overrate our debt to Diderot and his associates. == Other participants == Participants in the Congress included authors, librarians, scholars, archivists, scientists, and editors. Some of the notable people in attendance not mentioned above were:
Read more →