AI Headshot Business

AI Headshot Business — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

• 

  Open-source robotics

  Open-source robotics is a branch of robotics where robots are developed with open-source hardware and free and open-source software, publicly sharing blueprints, schematics, and source code. It is thus closely related to the open design movement, the maker movement and open science. == Requirements == Open source robotics means that information about the hardware is easily discerned, so that others can easily rebuild it. In turn, this requires design to use only easily available standard subcomponents and tools, and for the build process to be documented in detail including a bill of materials and detailed ('Ikea style') step-by-step building and testing instructions. (A CAD file alone is not sufficient, as it does not show the steps for performing or testing the build). These requirements are standard to open source hardware in general, and are formalised by various licences, certifications, especially those defined by the peer-reviewed journals Journal of Open Hardware and HardwareX. Licensing requirements for software are the same as for any open source software. But in addition, for software components to be of practical use in real robot systems, they need to be compatible with other software, usually as defined by some robotics middleware community standard. == Hardware systems == Applications to date include: Robot arms, e.g. PARA or Thor Wheeled mobile robots. e.g. OpenScout Four-legged robots such as the Open Dynamic Robot Initiative UAV quadcopters (drones) such as Agilicious Humanoid robots, e.g. iCub, Berkeley Humanoid Lite Self-driving cars, e.g. OpenPodcar (→ Personal rapid transit) Submersible robots, eg. OpenFish Laboratory robotics such as chemical liquid handling Vertical farming Swarm robots, e.g. HeRoSwarm Domestic tasks: vacuum cleaning, floor washing and grass mowing Robot sports including robot combat and autonomous racing Education == Hardware subcomponents == Most open source hardware definitions allow non-open subcomponents to be used in modular design, as long as they are easily available. However many designs try to push openness down into as many subcomponents as possible, with the aim of ultimately reaching fully open designs. Open hardware manual-drive vehicles and their subcomponents, such as from Open Source Ecology, are often used as starting points and extended with automation systems. Open subcomponents can include open-source computing hardware as subcomponents, such as Arduino and RISC-V, as well as open source motors and drivers such as the Open Source Motor Controller and ODrive. Open hardware robotics interface boards can simplify interfacing between middleware software and physical hardware. == Software subcomponents == === Middleware === Robotics middleware is software which links multiple other software components together. In robotics, this specifically means real-time communication systems with standardized message passing protocols. The predominant open source middleware is ROS2, the robot operating system, now as version 2. Other alternatives include ROS1, YARP — used in the iCub, URBI, and Orca. Open source middleware is usually run on an open source operating system, especially the Ubuntu distribution of Linux. === Driver software === Most robot sensors and actuators require software drivers. There is little standardization of open source software at this level, because each hardware device is different. Creating open drivers for closed hardware is difficult as it requires both low level programming and reverse engineering. === Simulation software === Open source robotics simulators include Gazebo, MuJoCo and Webots. Open source 3D game engines such as Godot are also sometimes used as simulators, when equipped with suitable middleware interfaces. === Automation software === At the level of AI, many standard algorithms have open source software implementations, mostly in ROS2. Major components include: Machine vision systems such as the YOLO object detector. 3D photogrammetry Navigation including SLAM and planning such as nav2 Arm inverse kinematics such as moveIt2 == Community == The first signs of the increasing popularity of building and sharing robot designs were found with the maker culture community. What began with small competitions for remote operated vehicles (e.g. Robot combat), soon developed to the building of autonomous telepresence robots such as Sparky and then true robots (being able to take decisions themselves) as the Open Automaton Project. Several commercial companies now also produce kits for making simple robots. The community has adopted open source hardware licenses, certifications, and peer-reviewed publications, which check that source has been made correctly and permanently available under community definitions, and which validate that this has been done. These processes have become critically important due to many historical projects claiming to be open source but them reverting on the promise due to commercialisation or other pressures. As with other forms of open source hardware, the community continues to debate precise criteria for 'ease of build'. A common standard is that designs should be buildable by a technical university student, in a few days, using typical fablab tools, but definitions of all of these subterms can also be debated. Compared to other forms of open source hardware, open source robotics typically includes a large software element, so involves software as well as hardware engineers. Open source concepts are more established in open source software than hardware, so robotics is a field in which those concepts can be shared and transferred from software to hardware. While the community in open source robotics is multi-faceted with a wide range of backgrounds, a sizable sub-community uses the ROS middleware and meets at the ROSCon conferences to discuss development of ROS itself and automation components built on it.

  Read more →
• 

  Data remanence

  Data remanence is the residual representation of digital data that remains even after attempts have been made to remove or erase the data. This residue may result from data being left intact by a nominal file deletion operation, by reformatting of storage media that does not remove data previously written to the media, or through physical properties of the storage media that allow previously written data to be recovered. Data remanence may make inadvertent disclosure of sensitive information possible should the storage media be released into an uncontrolled environment (e.g., thrown in refuse containers or lost). Various techniques have been developed to counter data remanence. These techniques are classified as clearing, purging/sanitizing, or destruction. Specific methods include overwriting, degaussing, encryption, and media destruction. Effective application of countermeasures can be complicated by several factors, including media that are inaccessible, media that cannot effectively be erased, advanced storage systems that maintain histories of data throughout the data's life cycle, and persistence of data in memory that is typically considered volatile. Several standards exist for the secure removal of data and the elimination of data remanence. == Causes == Many operating systems, file managers, and other software provide a facility where a file is not immediately deleted when the user requests that action. Instead, the file is moved to a holding area (i.e. the "trash"), making it easy for the user to undo a mistake. Similarly, many software products automatically create backup copies of files that are being edited, to allow the user to restore the original version, or to recover from a possible crash (autosave feature). Even when an explicit deleted file retention facility is not provided or when the user does not use it, operating systems do not actually remove the contents of a file when it is deleted unless they are aware that explicit erasure commands are required, like on a solid-state drive. (In such cases, the operating system will issue the Serial ATA TRIM command or the SCSI UNMAP command to let the drive know to no longer maintain the deleted data.) Instead, they simply remove the file's entry from the file system directory because this requires less work and is therefore faster, and the contents of the file—the actual data—remain on the storage medium. The data will remain there until the operating system reuses the space for new data. In some systems, enough filesystem metadata are also left behind to enable easy undeletion by commonly available utility software. Even when undelete has become impossible, the data, until it has been overwritten, can be read by software that reads disk sectors directly. Computer forensics often employs such software. Likewise, reformatting, repartitioning, or reimaging a system is unlikely to write to every area of the disk, though all will cause the disk to appear empty or, in the case of reimaging, empty except for the files present in the image, to most software. Finally, even when the storage media is overwritten, physical properties of the media may permit recovery of the previous contents. In most cases however, this recovery is not possible by just reading from the storage device in the usual way, but requires using laboratory techniques such as disassembling the device and directly accessing/reading from its components. § Complications below gives further explanations for causes of data remanence. == Countermeasures == There are three levels commonly recognized for eliminating remnant data: === Clearing === Clearing is the removal of sensitive data from storage devices in such a way that there is assurance that the data may not be reconstructed using normal system functions or software file/data recovery utilities. The data may still be recoverable, but not without special laboratory techniques. Clearing is typically an administrative protection against accidental disclosure within an organization. For example, before a hard drive is re-used within an organization, its contents may be cleared to prevent their accidental disclosure to the next user. === Purging === Purging or sanitizing is the physical rewrite of sensitive data from a system or storage device done with the specific intent of rendering the data unrecoverable at a later time. Purging, proportional to the sensitivity of the data, is generally done before releasing media beyond control, such as before discarding old media, or moving media to a computer with different security requirements. === Destruction === The storage media is made unusable for conventional equipment. Effectiveness of destroying the media varies by medium and method. Depending on recording density of the media, and/or the destruction technique, this may leave data recoverable by laboratory methods. Conversely, destruction using appropriate techniques is the most secure method of preventing retrieval. == Specific methods == === Overwriting === A common method used to counter data remanence is to overwrite the storage media with new data. This is often called wiping or shredding a disk or file, by analogy to common methods of destroying print media, although the mechanism bears no similarity to these. Because such a method can often be implemented in software alone, and may be able to selectively target only part of the media, it is a popular, low-cost option for some applications. Overwriting is generally an acceptable method of clearing, as long as the media is writable and not damaged. The simplest overwrite technique writes the same data everywhere—often just a pattern of all zeros. At a minimum, this will prevent the data from being retrieved simply by reading from the media again using standard system functions. The UEFI in modern machines may offer an ATA class disk erase function as well. The ATA-6 standard governs secure erases specifications. Bitlocker is whole disk encryption and illegible without the key. Writing a fresh GPT allows a new file system to be established. Blocks will set empty but LBA read is illegible. New data will be unaffected and work fine. In an attempt to counter more advanced data recovery techniques, specific overwrite patterns and multiple passes have often been prescribed. These may be generic patterns intended to eradicate any trace signatures; an example is the seven-pass pattern 0xF6, 0x00, 0xFF, , 0x00, 0xFF, , sometimes erroneously attributed to US standard DOD 5220.22-M. One challenge with overwriting is that some areas of the disk may be inaccessible, due to media degradation or other errors. Software overwrite may also be problematic in high-security environments, which require stronger controls on data commingling than can be provided by the software in use. The use of advanced storage technologies may also make file-based overwrite ineffective (see the related discussion below under § Complications). There are specialized machines and software that are capable of doing overwriting. The software can sometimes be a standalone operating system specifically designed for data destruction. There are also machines specifically designed to wipe hard drives to the department of defense specifications DOD 5220.22-M. Writing zero to each block on hard disks and SSDs has the advantage of affording the firmware to deploy spare blocks when bad blocks are identified. Bitlocker has the advantage that data is illegible without the key. Seatools and other tools can erase disks with zero which is typical to revive old consumer class disks but they can wipe server disks albeit slowly. Modern 28TB and larger disks have an enormous number of LBA48 blocks. 40TB and 60TB disks will take proportionately longer times to wipe. ==== Feasibility of recovering overwritten data ==== Peter Gutmann investigated data recovery from nominally overwritten media in the mid-1990s. He suggested magnetic force microscopy may be able to recover such data, and developed specific patterns, for specific drive technologies, designed to counter such. These patterns have come to be known as the Gutmann method. Gutmann's belief in the possibility of data recovery is based on many questionable assumptions and factual errors that indicate a low level of understanding of how hard drives work. Daniel Feenberg, an economist at the private National Bureau of Economic Research, claims that the chances of overwritten data being recovered from a modern hard drive amount to "urban legend". He also points to the "18+1⁄2-minute gap" Rose Mary Woods created on a tape of Richard Nixon discussing the Watergate break-in. Erased information in the gap has not been recovered, and Feenberg claims doing so would be an easy task compared to recovery of a modern high density digital signal. As of November 2007, the United States Department of Defense considers overwriting acceptable for clearing magnetic media within the same security area/

  Read more →
• 

  Videotex

  Videotex (or interactive videotex) was one of the earliest implementations of an end-user information system. From the late 1970s to early 2010s, it was used to deliver information (usually pages of text) to a user in computer-like format, typically to be displayed on a television or a dumb terminal. In a strict definition, videotex is any system that provides interactive content and displays it on a video monitor such as a television, typically using modems to send data in both directions. A close relative is teletext, which sends data in one direction only, typically encoded in a television signal. All such systems are occasionally referred to as viewdata. Unlike the modern Internet, traditional videotex services were highly centralized. Videotex in its broader definition can be used to refer to any such service, including teletext, the Internet, bulletin board systems, online service providers, and even the arrival/departure displays at an airport. This usage is no longer common. With the exception of Minitel in France, videotex elsewhere never managed to attract any more than a very small percentage of the universal mass market once envisaged. By the end of the 1980s its use was essentially limited to a few niche applications. == Initial development and technologies == === United Kingdom === The first attempts at a general-purpose videotex service were created in the United Kingdom in the late 1960s. In about 1970 the BBC had a brainstorming session in which it was decided to start researching ways to send closed captioning information to the audience. As the Teledata research continued the BBC became interested in using the system for delivering any sort of information, not just closed captioning. In 1972, the concept was first made public under the new name Ceefax. Meanwhile, the General Post Office (soon to become British Telecom) had been researching a similar concept since the late 1960s, known as Viewdata. Unlike Ceefax which was a one-way service carried in the existing TV signal, Viewdata was a two-way system using telephones. Since the Post Office owned the telephones, this was considered to be an excellent way to drive more customers to use the phones. Not to be outdone by the BBC, they also announced their service, under the name Prestel. ITV soon joined the fray with a Ceefax-clone known as ORACLE. In 1974, all the services agreed on a standard for displaying the information. The display would be a simple 40×24 grid of text, with some "graphics characters" for constructing simple graphics, revised and finalized in 1976. The standard did not define the delivery system, so both Viewdata-like and Teledata-like services could at least share the TV-side hardware, which was expensive at the time. The standard also introduced a new term that covered all such services, teletext. Ceefax first started operation in 1974 with a limited 30 pages, followed quickly by ORACLE and then Prestel in 1979. By 1981, Prestel International was available in nine countries, and a number of countries, including Sweden, The Netherlands, Finland and West Germany were developing their own national systems closely based on Prestel. General Telephone and Electronics (GTE) acquired an exclusive agency for the system for North America. In the early 1980s, videotex became the base technology for the London Stock Exchange's pricing service called TOPIC. Later versions of TOPIC, notably TOPIC2 and TOPIC3, were developed by Thanos Vassilakis and introduced trading and historic price feeds. === France === Development of a French teletext-like system began in 1973. A very simple 2-way videotex system called Tictac was also demonstrated in the mid-1970s. As in the UK, this led on to work to develop a common display standard for videotex and teletext, called Antiope, which was finalised in 1977. Antiope had similar capabilities to the UK system for displaying alphanumeric text and chunky "mosaic" character-based block graphics. A difference however was that while in the UK standard control codes automatically also occupied one character position on screen, Antiope allowed for "non spacing" control codes. This gave Antiope slightly more flexibility in the use of colours in mosaic block graphics, and in presenting the accents and diacritics of the French language. Meanwhile, spurred on by the 1978 Nora/Minc report, the French government was determined to catch up on a perceived falling behind in its computer and communications facilities. In 1980 it began field trials issuing Antiope-based terminals for free to over 250,000 telephone subscribers in Ille-et-Vilaine region, where the French CCETT research centre was based, for use as telephone directories. The trial was a success, and in 1982 Minitel was rolled out nationwide. === Canada === Since 1970, researchers at the Communications Research Centre (CRC) in Ottawa had been working on a set of "picture description instructions", which encoded graphics commands as a text stream. Graphics were encoded as a series of instructions (graphics primitives) each represented by a single ASCII character. Graphic coordinates were encoded in multiple 6 bit strings of XY coordinate data, flagged to place them in the printable ASCII range so that they could be transmitted with conventional text transmission techniques. ASCII SI/SO characters were used to differentiate the text from graphic portions of a transmitted "page". In 1975, the CRC gave a contract to Norpak to develop an interactive graphics terminal that could decode the instructions and display them on a colour display, which was successfully up and running by 1977. Against the background of the developments in Europe, CRC was able to persuade the Canadian government to develop the system into a fully-fledged service. In August 1978, the Canadian Department of Communications publicly launched it as Telidon, a "second generation" videotex/teletext service, and committed to a four-year development plan to encourage rollout. Compared to the European systems, Telidon offered real graphics, as opposed to block-mosaic character graphics. The downside was that it required much more advanced decoders, typically featuring Zilog Z80 or Motorola 6809 processors. === Japan === Research in Japan was shaped by the demands of the large number of Kanji characters used in Japanese script. With 1970s technology, the ability to generate so many characters on demand in the end-user's terminal was seen as prohibitive. Instead, development focussed on methods to send pages to user terminals pre-rendered, using coding strategies similar to facsimile machines. This led to a videotex system called Captain ("Character and Pattern Telephone Access Information Network"), created by NTT in 1978, which went into full trials from 1979 to 1981. The system also lent itself naturally to photographic images, albeit at only moderate resolution. However, the pages typically took two or three times longer to load, compared to the European systems. NHK developed an experimental teletext system along similar lines, called CIBS ("Character Information Broadcasting Station"). Based on a 388×200 pixel resolution, it was first announced in 1976, and began trials in late 1978. (NHK's ultimate production teletext system launched in 1983). == Standards == Work to establish an international standard for videotex began in 1978 in CCITT. But the national delegations showed little interest in compromise, each hoping that their system would come to define what was perceived to be going to be an enormous new mass-market. In 1980 CCITT therefore issued recommendation S.100 (later T.100), noting the points of similarity but the essential incompatibility of the systems, and declaring all four to be recognised options. Trying to kick-start the market, AT&T Corporation entered the fray, and in May 1981 announced its own Presentation Layer Protocol (PLP). This was closely based on the Canadian Telidon system, but added to it some further graphics primitives and a syntax for defining macros, algorithms to define cleaner pixel spacing for the (arbitrarily sizeable) text, and also dynamically redefinable characters and a mosaic block graphic character set, so that it could reproduce content from the French Antiope. After some further revisions this was adopted in 1983 as ANSI standard X3.110, more commonly called NAPLPS, the North American Presentation Layer Protocol Syntax. It was also adopted in 1988 as the presentation-layer syntax for NABTS, the North American Broadcast Teletext Specification. Meanwhile, the European national Postal Telephone and Telegraph (PTT) agencies were also increasingly interested in videotex, and had convened discussions in European Conference of Postal and Telecommunications Administrations (CEPT) to co-ordinate developments, which had been diverging along national lines. As well as the British and French standards, the Swedes had proposed extending the British Prestel standard with a new se

  Read more →
• 

  Secure environment

  In computing, a secure environment is any system which implements the controlled storage and use of information. In the event of computing data loss, a secure environment is used to protect personal or confidential data. It may also be known as a trusted execution environment (TEE). Often, secure environments employ cryptography as a means to protect information. This is typically used for processing confidential or restricted information. Some secure environments employ cryptographic hashing, simply to verify that the information has not been altered since it was last modified.

  Read more →
• 

  Collateral freedom

  Collateral freedom is an anti-censorship strategy that attempts to make it economically prohibitive for censors to block content on the Internet. This is achieved by hosting content on cloud services that are considered by censors to be "too important to block", and then using encryption to prevent censors from identifying requests for censored information that is hosted among other content, forcing censors to either allow access to the censored information or take down entire services.

  Read more →
• 

  IDMS

  The Integrated Database Management System (IDMS) is a network model (CODASYL) database management system for mainframes. It was first developed at BFGoodrich and later marketed by Cullinane Database Systems (renamed Cullinet in 1983). Since 1989 the product has been owned by Computer Associates (now CA Technologies), who renamed it Advantage CA-IDMS and later simply to CA IDMS. In 2018 Broadcom acquired CA Technologies, renaming it back to IDMS. == History == The roots of IDMS go back to the pioneering database management system called Integrated Data Store (IDS), developed at General Electric by a team led by Charles Bachman and first released in 1964. In the early 1960s IDS was taken from its original form, by the computer group of the BFGoodrich Chemical Division, and re-written in a language called Intermediate System Language (ISL). ISL was designed as a portable system programming language able to produce code for a variety of target machines. Since ISL was actually written in ISL, it was able to be ported to other machine architectures with relative ease, and then to produce code that would execute on them. The Chemical Division computer group had given some thought to selling copies of IDMS to other companies, but was told by management that they were not in the software products business. Eventually, a deal was struck with John Cullinane to buy the rights and market the product. Because Cullinane was required to remit royalties back to B.F. Goodrich, all add-on products were listed and billed as separate products – even if they were mandatory for the core IDMS product to work. This sometimes confused customers. The original platforms were the GE 235 computer and GE DATANET-30 message switching computer: later the product was ported to IBM mainframes and to DEC and ICL hardware. The IBM-ported version runs on IBM mainframe systems (System/360, System/370, System/390, zSeries, System z9). In the mid-1980s, it was claimed that some 2,500 IDMS licenses had been sold. Users included the Strategic Air Command, Ford of Canada, Ford of Europe, Jaguar Cars, Clarks Shoes UK, Axa/PPP, MAPFRE, Royal Insurance, Tesco, Manulife, Hudson's Bay Company, Cleveland Clinic, Bank of Canada, General Electric, Aetna and BT in the UK. A version for use on the Digital Equipment Corporation PDP-11 series of computers was sold to DEC and was marketed as DBMS-11. In 1976 the source code was licensed to ICL, who ported the software to run on their 2900 series mainframes, and subsequently also on the older 1900 range. ICL continued development of the software independently of Cullinane, selling the original ported product under the name ICL 2900 IDMS and an enhanced version as IDMSX. In this form it was used by many large UK users, an example being the Pay-As-You-Earn system operated by Inland Revenue. Many of these IDMSX systems for UK Government were still running in 2013. In the early to mid-1980s, relational database management systems started to become more popular, encouraged by increasing hardware power and the move to minicomputers and client–server architecture. Relational databases offered improved development productivity over CODASYL systems, and the traditional objections based on poor performance were slowly diminishing. Cullinet attempted to continue competing against IBM's DB2 and other relational databases by developing a relational front-end and a range of productivity tools. These included Automatic System Facility (ASF), which made use of a pre-existing IDMS feature called LRF (Logical Record Facility). ASF was a fill-in-the-blanks database generator that would also develop a mini-application to maintain the tables. It is difficult to judge whether such features may have been successful in extending the selling life of the product, but they made little impact in the long term. Those users who stayed with IDMS were primarily interested in its high performance, not in its relational capabilities. It was widely recognized (helped by a high-profile campaign by E. F. Codd, the father of the relational model) that there was a significant difference between a relational database and a network database with a relational veneer. In 1989 Computer Associates continued after Cullinet acquisition with the development and released Release 12.0 with full SQL in 1992–93. CA Technologies continued to market and support the CA IDMS and enhanced IDMS in subsequent releases by TCP/IP support, two phase commit support, XML publishing, zIIP specialty processor support, Web-enabled access in combination with CA IDMS Server, SQL Option and GUI database administration via CA IDMS Visual DBA tool. CA-IDMS systems are today still running businesses worldwide. Many customers have opted to web-enable their applications via the CA-IDMS SQL Option which is part of CA Technologies' Dual Database Strategy. == Integrated Data Dictionary == One of the sophisticated features of IDMS was its built-in Integrated data dictionary (IDD). The IDD was primarily developed to maintain database definitions. It was itself an IDMS database. DBAs (database administrators) and other users interfaced with the IDD using a language called Data Dictionary Definition Language (DDDL). IDD was also used to store definitions and code for other products in the IDMS family such as ADS/Online and IDMS-DC. IDD's power was that it was extensible and could be used to create definitions of just about anything. Some companies used it to develop in-house documentation. == Overview == === Logical Data Model === The data model offered to users is the CODASYL network model. The main structuring concepts in this model are records and sets. Records essentially follow the COBOL pattern, consisting of fields of different types: this allows complex internal structure such as repeating items and repeating groups. The most distinctive structuring concept in the Codasyl model is the set. Not to be confused with a mathematical set, a Codasyl set represents a one-to-many relationship between records: one owner, many members. The fact that a record can be a member in many different sets is the key factor that distinguishes the network model from the earlier hierarchical model. As with records, each set belongs to a named set type (different set types model different logical relationships). Sets are in fact ordered, and the sequence of records in a set can be used to convey information. A record can participate as an owner and member of any number of sets. Records have identity, the identity being represented by a value known as a database key. In IDMS, as in most other Codasyl implementations, the database key is directly related to the physical address of the record on disk. Database keys are also used as pointers to implement sets in the form of linked lists and trees. This close correspondence between the logical model and the physical implementation (which is not a strictly necessary part of the Codasyl model, but was a characteristic of all successful implementations) is responsible for the efficiency of database retrieval, but also makes operations such as database loading and restructuring rather expensive. Records can be accessed directly by database key, by following set relationships, or by direct access using key values. Initially the only direct access was through hashing, a mechanism known in the Codasyl model as CALC access. In IDMS, CALC access is implemented through an internal set, linking all records that share the same hash value to an owner record that occupies the first few bytes of every disk page. In subsequent years, some versions of IDMS added the ability to access records using BTree-like indexes. === Storage === IDMS organizes its databases as a series of files. These files are mapped and pre-formatted into so-called areas. The areas are subdivided into pages which correspond to physical blocks on the disk. The database records are stored within these blocks. The DBA allocates a fixed number of pages in a file for each area. The DBA then defines which records are to be stored in each area, and details of how they are to be stored. IDMS intersperses special space-allocation pages throughout the database. These pages are used to keep track of the free space available in each page in the database. To reduce I/O requirements, the free space is only tracked for all pages when the free space for the area falls below 30%. Four methods are available for storing records in an IDMS database: Direct, Sequential, CALC, and VIA. The Fujitsu/ICL IDMSX version extends this with two more methods, Page Direct, and Random. In direct mode the target database key is specified by the user and is stored as close as possible to that DB key, with the actual DB key on which the record is stored being returned to the application program. Sequential placement (not to be confused with indexed sequential), simply places each new record at the end of the area. This option is rarely used. CALC uses a hashing algo

  Read more →
• 

  Geofence warrant

  A geofence warrant or a reverse location warrant is a search warrant issued by a court to allow law enforcement to search a database to find all active mobile devices within a particular geo-fence area. Courts have granted law enforcement geo-fence warrants to obtain information from databases such as Google's Sensorvault, which collects users' historical geolocation data. Geo-fence warrants are a part of a category of warrants known as reverse search warrants. == History == Geofence warrants were first used in 2016. Google reported that it had received 982 such warrants in 2018, 8,396 in 2019, and 11,554 in 2020. A 2021 transparency report showed that 25% of data requests from law enforcement to Google were geo-fence data requests. Google is the most common recipient of geo-fence warrants and the main provider of such data, although companies including Apple, Snapchat, Lyft, and Uber have also received such warrants. == Legality == === United States === Some lawyers and privacy experts believe reverse search warrants are unconstitutional under the Fourth Amendment to the United States Constitution, which protects people from unreasonable searches and seizures, and requires any search warrants be specific to what and to whom they apply. The Fourth Amendment specifies that warrants may only be issued "upon probable cause, supported by Oath or affirmation, and particularly describing the place to be searched, and the persons or things to be seized." Some lawyers, legal scholars, and privacy experts have likened reverse search warrants to general warrants, which were made illegal by the Fourth Amendment. Groups including the Electronic Frontier Foundation have opposed geo-fence warrants in amicus briefs filed in motions to quash such orders to disclose geo-fence data. In 2024, a panel of the United States Fourth Circuit Court of Appeals considered data acquired from Google’s Sensorvault not to be a search, but non-private business records when users opt-in to Google’s location history. However, upon a rehearing en banc, the Court vacated that decision. In April 2025, the full Court affirmed the judgment solely on the 'good faith' exception, leaving the underlying constitutional question of whether geofence warrants constitute a search unsettled in the Circuit. However, the United States Fifth Circuit Court of Appeals found that geofence warrants are "categorically prohibited by the Fourth Amendment." The split in Circuits prompted the United States Supreme Court to agree to hear Chatrie v. United States in January 2026.

  Read more →
• 

  Zardoz (computer security)

  In computer security, the Security-Digest list, better known as the Zardoz list, was a semi-private full disclosure mailing list run by Neil Gorsuch from 1989 through 1991. It identified weaknesses in systems and gave directions on where to find them. It was a perennial target for computer hackers, who sought archives of the list for information on undisclosed software vulnerabilities. == Membership restrictions == Access to Zardoz was approved on a case-by-case basis by Gorsuch, principally by reference to the user account used to send subscription requests; requests were approved for root users, valid UUCP owners, or system administrators listed at the NIC. The openness of the list to users other than Unix system administrators was a regular topic of conversation, with participants expressing concern that vulnerabilities and exploitation details disclosed on the list were liable to spread to hackers. The circulation of Zardoz postings was an open secret among computer hackers, and mocked in a Phrack parody of an IRC channel populated by security experts. == Notable participants == Keith Bostic discussed BSD Sendmail vulnerabilities Chip Salzenberg discussed Peter Honeyman's posting of a UUCP worm, and shell script security Gene Spafford discussed VMS and Ultrix bugs, and relayed law enforcement enquiries about the Morris Worm Tom Christiansen discussed SUID shell scripts Chris Torek discussed devising exploits from general descriptions of vulnerabilities Henry Spencer discussed Unix security Brendan Kehoe discussed systems security Alec Muffett announced Crack, the Unix password cracker The majority of Zardoz participants were Unix systems administrators and C software developers. Neil Gorsuch and Gene Spafford were the most prolific contributors to the list.

  Read more →
• 

  Comparison of vector graphics editors

  A number of vector graphics editors exist for various platforms. Potential users of these editors will make comparisons based on factors such as the availability for the user's platform, the software license, the feature set, the merits of the user interface (UI) and the focus of the program. Some programs are more suitable for artistic work while others are better for technical drawings. Another important factor is the application's support of various vector and bitmap image formats for import and export. The tables in this article compare general and technical information for a number of vector graphics editors. See the article on each editor for further information. This article is neither all-inclusive nor necessarily up-to-date. == Some editors in detail == Adobe Fireworks (formerly Macromedia Fireworks) is a vector editor with bitmap editing capabilities with its main purpose being the creation of graphics for Web and screen. Fireworks supports RGB color scheme and has no CMYK support. This means it is mostly used for screen design. The native Fireworks file format is editable PNG (FWPNG or PNG). Adobe Fireworks has a competitive price, but its features can seem limited in comparison with other products. It is easier to learn than other products and can produce complex vector artwork. The Fireworks editable PNG file format is not supported by other Adobe products. Fireworks can manage the PSD and AI file formats which enables it to be integrated with other Adobe apps. Fireworks can also open FWPNG/PNG, PSD, AI, EPS, JPG, GIF, BMP, TIFF file formats, and save/export to FWPNG/PNG, PSD, AI (v.8), FXG (v.2.0), JPG, GIF, PDF, SWF and some others. Some support for exporting to SVG is available via a free Export extension. On May 6, 2013, Adobe announced that Fireworks would be phased out. Adobe Flash (formerly a Macromedia product) has straightforward vector editing tools that make it easier for designers and illustrators to use. The most important of these tools are vector lines and fills with bitmap-like selectable areas, simple modification of curves via the "selection" or the control points/handles through "direct selection" tools. Flash uses Actionscript for OOP, and has full XML functionality through E4X support. Adobe FreeHand (formerly Macromedia Freehand and Aldus Freehand) is mainly used by professional graphic designers. The functionality of FreeHand includes the flexibility of the application in the wide design environment, catering to the output needs of both traditional image reproduction methods and to contemporary print and digital media with its page-layout capabilities and text attribute controls. Specific functions of FreeHand include a superior image-tracing operation for vector editing, page layout features within multiple-page documents, and embedding custom print-settings (such as variable halftone-screen specifications within a single graphic, etc.) to each document independent of auxiliary printer-drivers. User-operation is considered to be more suited for designers with an artistic background compared to designers with a technical background. When being marketed, FreeHand lacked the promotional backing, development and PR support in comparison to other similar products. FreeHand was transferred to the classic print group after Macromedia was purchased by Adobe in 2005. On May 16, 2007, Adobe announced that no further updates to Freehand would be developed but continues to sell FreeHand MX as a Macromedia product. FreeHand continues to run on Mac OS X Snow Leopard (using an Adobe fix) and on Windows 7. For macOS, Affinity Designer is able to open version 10 & MX Freehand files. Adobe Illustrator is a commonly used editor because of Adobe's market dominance, but is more expensive than other similar products. It is primarily developed consistently in line with other Adobe products and is best integrated with Adobe's Creative Suite packages. The ai file format is proprietary, but some vector editors can open and save in that format. Illustrator imports over two dozen formats, including PSD, PDF and SVG, and exports AI, PDF, SVG, SVGZ, GIF, JPG, PNG, WBMP, and SWF. However, the user must be aware of unchecking the "Preserve Illustrator Editing Capabilities" option if generating interoperable SVG files is desired. Affinity Designer by Serif Europe (the successor to their previous product, DrawPlus) is non-subscription-based software that is often described as an alternative to Adobe Illustrator. The application can open Portable Document Format (PDF), Adobe Photoshop, and Adobe Illustrator files, as well as export to those formats and to the Scalable Vector Graphics (SVG) and Encapsulated PostScript (EPS) formats. It also supports import from some Adobe Freehand files (specifically versions 10 & MX). Apache OpenOffice Draw is the vector graphics editor of the Apache OpenOffice open source office suite. It supports many import and export file formats and is available for multiple desktop operating systems. Boxy SVG is a chromium-based vector graphics editor for creating illustrations, as well as logos, icons, and other elements of graphic design. It is primarily focused on editing drawings in the SVG file format. The program is available as both a web app and a desktop application for Windows, macOS, ChromeOS, and Linux-based operating systems. Collabora Online Draw is the vector graphics editor of the Collabora Online open source office suite. It supports many import and export file formats and is accessible via any modern web browser, it also supports desktop editing features, Collabora Office is available for desktop and mobile operating systems, it is the enterprise ready version of LibreOffice. ConceptDraw PRO is a business diagramming tool and vector graphics editor available for both Windows and macOS. It supports multi-page documents, and includes an integrated presentation mode. ConceptDraw PRO supports imports and exports several formats, including Microsoft Visio and Microsoft PowerPoint. Corel Designer (originally Micrografx Designer) is one of the earliest vector-based graphics editors for the Microsoft Windows platform. The product is mainly used for the creation of engineering drawings and is shipped with extensive libraries for the needs of engineers. It is also flexible enough for most vector graphics design applications. CorelDRAW is an editor used in the graphic design, sign making and fashion design industries. CorelDRAW is capable of limited interoperation by reading file formats from Adobe Illustrator. CorelDRAW has over 50 import and export filters, on-screen and dialog box editing and the ability to create multi-page documents. It can also generate TrueType and Type 1 fonts, although refined typographic control is better suited to a more specific application. Some other features of CorelDRAW include the creation and execution of VBA macros, viewing of colour separations in print preview mode and integrated professional imposing options. Dia is a free and open-source diagramming and vector graphics editor available for Windows, Linux and other Unix-based computer operating systems. Dia has a modular design and several shape packages for flowcharting, network diagrams and circuit diagrams. Its design was inspired by Microsoft Visio, although it uses a Single Document Interface similar to other GNOME software (such as GIMP). DrawPlus, first built for the Windows platform in 1993, has matured into a full featured vector graphics editor for home and professional users. Also available as a feature-limited free 'starter edition': DrawPlus SE. DrawPlus developers, Serif Europe, have now ceased its development in order to focus on its successor, Affinity Designer. Edraw Max is a cross-platform diagram software and vector graphics editor available for Windows, Mac and Linux. It supports kinds of diagram types. It supports imports and exports SVG, PDF, HTML, Multiple page TIFF, Microsoft Visio and Microsoft PowerPoint. Embroidermodder is a free machine embroidery software tool that supports a variety of formats and allows the user to add custom modifications to their embroidery designs. Fatpaint is a free, light-weight, browser-based graphic design application with built-in vector drawing tools. It can be accessed through any browser with Flash 9 installed. Its integration with Zazzle makes it particularly suitable for people who want to create graphics for custom printed products such as T-shirts, mugs, iPhone cases, flyers and other promotional products. Figma is a collaborative web-based online vector graphics editor, used primarily for UX design and prototyping. GIMP, which works mainly with raster images, offers a limited set of features to create and record SVG files. It can also load and handle SVG files created with other software like Inkscape. Inkscape is a free and open-source vector editor with the primary native format being SVG. Inkscape is available for Linux, Windows, Mac OS X, and

  Read more →
• 

  Generative art

  Generative art is post-conceptual art that has been created (in whole or in part) with the use of an autonomous system. An autonomous system in this context is generally one that is non-human and can independently determine features of an artwork that would otherwise require decisions made directly by the artist. In some cases the human creator may claim that the generative system represents their own artistic idea, and in others that the system takes on the role of the creator. "Generative art" often refers to algorithmic art (algorithmically determined computer generated artwork) and synthetic media (general term for any algorithmically generated media), but artists can also make generative art using systems of chemistry, biology, mechanics and robotics, smart materials, manual randomization, mathematics, data mapping, symmetry, and tiling. Generative algorithms, algorithms programmed to produce artistic works through predefined rules, stochastic methods, or procedural logic, often yielding dynamic, unique, and contextually adaptable outputs—are central to many of these practices. == History == The use of the word "generative" in the discussion of art has developed over time. The use of "Artificial DNA" defines a generative approach to art focused on the construction of a system able to generate unpredictable events, all with a recognizable common character. The use of autonomous systems, required by some contemporary definitions, focuses a generative approach where the controls are strongly reduced. This approach is also named "emergent". Margaret Boden and Ernest Edmonds have noted the use of the term "generative art" in the broad context of automated computer graphics in the 1960s, beginning with artwork exhibited by Georg Nees and Frieder Nake in 1965: A. Michael Noll did his initial computer art, combining randomness with order, in 1962, and exhibited it along with works by Bell Julesz in 1965. The terms "generative art" and "computer art" have been used in tandem, and more or less interchangeably, since the very earliest days. The first such exhibition showed the work of Nees in February 1965, which some claim was titled "Generative Computergrafik". While Nees does not himself remember, this was the title of his doctoral thesis published a few years later. The correct title of the first exhibition and catalog was "computer-grafik". "Generative art" and related terms was in common use by several other early computer artists around this time, including Manfred Mohr and Ken Knowlton. Vera Molnár (born 1924) is a French media artist of Hungarian origin. Molnar is widely considered to be a pioneer of generative art, and is also one of the first women to use computers in her art practice. The term "Generative Art" with the meaning of dynamic artwork-systems able to generate multiple artwork-events was clearly used the first time for the "Generative Art" conference in Milan in 1998. The term has also been used to describe geometric abstract art where simple elements are repeated, transformed, or varied to generate more complex forms. Thus defined, generative art was practiced by the Argentinian artists Eduardo Mac Entyre and Miguel Ángel Vidal in the late 1960s. In 1972 the Romanian-born Paul Neagu created the Generative Art Group in Britain. It was populated exclusively by Neagu using aliases such as "Hunsy Belmood" and "Edward Larsocchi". In 1972 Neagu gave a lecture titled 'Generative Art Forms' at the Queen's University, Belfast Festival. In 1970 the School of the Art Institute of Chicago created a department called Generative Systems. As described by Sonia Landy Sheridan the focus was on art practices using the then new technologies for the capture, inter-machine transfer, printing and transmission of images, as well as the exploration of the aspect of time in the transformation of image information. Also noteworthy is John Dunn, first a student and then a collaborator of Sheridan. In 1988 Clauser identified the aspect of systemic autonomy as a critical element in generative art: It should be evident from the above description of the evolution of generative art that process (or structuring) and change (or transformation) are among its most definitive features, and that these features and the very term 'generative' imply dynamic development and motion. (the result) is not a creation by the artist but rather the product of the generative process - a self-precipitating structure. In 1989 Celestino Soddu defined the Generative Design approach to Architecture and Town Design in his book Citta' Aleatorie. In 1989 Franke referred to "generative mathematics" as "the study of mathematical operations suitable for generating artistic images." From the mid-1990s Brian Eno popularized the terms generative music and generative systems, making a connection with earlier experimental music by Terry Riley, Steve Reich and Philip Glass. From the end of the 20th century, communities of generative artists, designers, musicians and theoreticians began to meet, forming cross-disciplinary perspectives. The first meeting about generative Art was in 1998, at the inaugural International Generative Art conference at Politecnico di Milano University, Italy. In Australia, the Iterate conference on generative systems in the electronic arts followed in 1999. On-line discussion has centered around the eu-gene mailing list, which began late 1999, and has hosted much of the debate which has defined the field. These activities have more recently been joined by the Generator.x conference in Berlin starting in 2005. In 2012 the new journal GASATHJ, Generative Art Science and Technology Hard Journal was founded by Celestino Soddu and Enrica Colabella jointing several generative artists and scientists in the editorial board. Some have argued that as a result of this engagement across disciplinary boundaries, the community has converged on a shared meaning of the term. As Boden and Edmonds put it in 2011: Today, the term "Generative Art" is still current within the relevant artistic community. Since 1998 a series of conferences have been held in Milan with that title (Generativeart.com), and Brian Eno has been influential in promoting and using generative art methods (Eno, 1996). Both in music and in visual art, the use of the term has now converged on work that has been produced by the activation of a set of rules and where the artist lets a computer system take over at least some of the decision-making (although, of course, the artist determines the rules). In the call of the Generative Art conferences in Milan (annually starting from 1998), the definition of Generative Art by Celestino Soddu: Generative Art is the idea realized as genetic code of artificial events, as construction of dynamic complex systems able to generate endless variations. Each Generative Project is a concept-software that works producing unique and non-repeatable events, like music or 3D Objects, as possible and manifold expressions of the generating idea strongly recognizable as a vision belonging to an artist / designer / musician / architect /mathematician. Discussion on the eu-gene mailing list was framed by the following definition by Adrian Ward from 1999: Generative art is a term given to work which stems from concentrating on the processes involved in producing an artwork, usually (although not strictly) automated by the use of a machine or computer, or by using mathematic or pragmatic instructions to define the rules by which such artworks are executed. A similar definition is provided by Philip Galanter: Generative art refers to any art practice where the artist creates a process, such as a set of natural language rules, a computer program, a machine, or other procedural invention, which is then set into motion with some degree of autonomy contributing to or resulting in a completed work of art. Around the 2020s, generative AI models learned to imitate the distinct style of particular authors. For example, a generative image model such as Stable Diffusion is able to model the stylistic characteristics of an artist like Pablo Picasso (including his particular brush strokes, use of colour, perspective, and so on), and a user can engineer a prompt such as "an astronaut riding a horse, by Picasso" to cause the model to generate a novel image applying the artist's style to an arbitrary subject. Generative image models have received significant backlash from artists who object to their style being imitated without their permission, arguing that this harms their ability to profit from their own work. The emergence of text-to-image generative AI systems has expanded debates over authorship, copyright, and artistic labor. The main issues in these debates include the eligibility of AI-generated outputs for copyright protection and the legal and ethical questions of using existing copyrighted works as training data for generative AI systems. == Types == === Music === Johann Kirnberger's Mu

  Read more →
• 

  Olio (app)

  Olio is a mobile app for sharing by giving away, getting, borrowing or lending things in your community for free, aiming to reduce household and food waste. It does this by connecting neighbours with spare food or household items to others nearby who wish to pick up those items. The food must be edible; it can be raw or cooked, sealed or open. Non-food items often listed on Olio include books, clothes and furniture. Those donating surplus food can be individuals or companies such as food retailers, restaurants, corporate canteens, food photographers etc., and donations can take place on an ad-hoc or recurrent basis. For example, some supermarket chains in the UK, including Tesco, the Midcounties Co-operative, Morrisons, Sainsbury's and Iceland have piloted Olio as an 'online food bank' to donate food and to reduce their waste. In March 2022, Olio partnered with Pandamart in Singapore. First launched in early 2015 by Tessa Clarke and Saasha Celestial-One, by October 2017 the company had raised $2.2 million in funding. Olio subsequently performed a series A funding round of $6 million in 2018 and a Series B of $43 million. Notable investors include Accel, Octopus Ventures and VNV Global. The Olio app had around 7 million registered users as of May 2023.

  Read more →
• 

  KE Software

  KE Software is a formerly Australian-owned computer software company based in Manchester, United Kingdom, which specialises in collection management programs for museums, galleries and archives. The Axiell Group acquired the firm in 2014. == History == KE Software had its origins in investigations into electronic systems for managing natural science collections conducted in the late 1970s under a joint program of the University of Melbourne, the then National Museum of Victoria and the Australian Museum, which led to the development of the Titan Database in 1984. Much of the credit for the development of the project was due to the work of Martin Hallett of the Museum of Victoria which evolved into Textpress, and by 2000, the KE EMu database program. KE Software was bought by Axiell in 2014 and the team merged with the Axiell staff. Axiell continues to sell and support EMu. == Products == The firm has two main products: the Ke EMu Electronic Museum management system, a collections management system for museums; and Vitalware Vital Records Management System. The first version of Ke EMu was launched in 1997 and uses the Texpress database engine with client/server architecture on a Windows or Unix/Linux server. Ke Emu is consistent with the Dublin Core / Darwin Core standards for archive and museum catalogue metadata. "The company’s clients include the three largest museums in the world.: == KE EMu == KE EMu is considered one of the more effective and purpose-designed museum cataloguing programs. particularly in the creation of public interfaces to museum catalogue data. KE EMu was further developed in 1997 as a multilingual platform, which has been utilised in bilingual institutions such as the Canadian Museum of Civilisation. Subsequently this evolved into Texpress and KE EMu (standing for Electronic MUseum) in 2000, which is "now used across the world in natural science museums with huge collections'". KE EMu is used by a large number of museums and galleries around the world, including the Smithsonian Anthropological Collection, American Museum of Natural HistoryVancouver Art Gallery, New York Botanical Garden, the University of Chicago Research Archives, the University of Pennsylvania Museum in Philadelphia, the National Museum of Australia, the Australian Museum, Museum of Victoria, University of Melbourne Archives, and the Alexander Turnbull Library, National Library of New Zealand. There are over 300 clients, and more than 5000 users of the EMu software worldwide. The program has been described as providing "...comprehensive museum management (collection management plus other administrative needs for a museum), workflow and project management, flexible metadata, various stats and metrics, and comprehensive web interface with support for mobile devices and kiosks" == KE Vitalware == The firm's vitalware software is used by a number of governments and commercial organisations for managing and accessing large data sets, such as the birth records of the Trinidad and Tobago Registrar General, the Government of Anguilla, Ministry for Infrastructure, Communications, Utility and Housing, and the Mississippi Department of Information Technology Services. == Further development == A specialist tracking component for KE EMu has been developed by Forbes Hawkins of Museum Victoria. This enables locations to be barcoded, and data to be updated as items are moved around the stores, or between venues, display, laboratories and other locations. This system has been considered by Museums around the world. The company has been working with Australian government agencies to digitize birth deaths and marriage registers in order to cross match identity data. The program has also been used for managing the Australian Plant Disease Database and the Australian Plant Pest Database as the program "...has several features that have proven to be invaluable for a plant disease database".

  Read more →
• 

  Curvelet

  Curvelets are a non-adaptive technique for multi-scale object representation. Being an extension of the wavelet concept, they are becoming popular in similar fields, namely in image processing and scientific computing. Wavelets generalize the Fourier transform by using a basis that represents both location and spatial frequency. For 2D or 3D signals, directional wavelet transforms go further, by using basis functions that are also localized in orientation. A curvelet transform differs from other directional wavelet transforms in that the degree of localisation in orientation varies with scale. In particular, fine-scale basis functions are long ridges; the shape of the basis functions at scale j is 2 − j {\displaystyle 2^{-j}} by 2 − j / 2 {\displaystyle 2^{-j/2}} so the fine-scale bases are skinny ridges with a precisely determined orientation. Curvelets are an appropriate basis for representing images (or other functions) which are smooth apart from singularities along smooth curves, where the curves have bounded curvature, i.e. where objects in the image have a minimum length scale. This property holds for cartoons, geometrical diagrams, and text. As one zooms in on such images, the edges they contain appear increasingly straight. Curvelets take advantage of this property, by defining the higher resolution curvelets to be more elongated than the lower resolution curvelets. However, natural images (photographs) do not have this property; they have detail at every scale. Therefore, for natural images, it is preferable to use some sort of directional wavelet transform whose wavelets have the same aspect ratio at every scale. When the image is of the right type, curvelets provide a representation that is considerably sparser than other wavelet transforms. This can be quantified by considering the best approximation of a geometrical test image that can be represented using only n {\displaystyle n} wavelets, and analysing the approximation error as a function of n {\displaystyle n} . For a Fourier transform, the squared error decreases only as O ( 1 / n ) {\displaystyle O(1/{\sqrt {n}})} . For a wide variety of wavelet transforms, including both directional and non-directional variants, the squared error decreases as O ( 1 / n ) {\displaystyle O(1/n)} . The extra assumption underlying the curvelet transform allows it to achieve O ( ( log ⁡ n ) 3 / n 2 ) {\displaystyle O({(\log n)}^{3}/{n^{2}})} . Efficient numerical algorithms exist for computing the curvelet transform of discrete data. The computational cost of the discrete curvelet transforms proposed by Candès et al. (Discrete curvelet transform based on unequally-spaced fast Fourier transforms and based on the wrapping of specially selected Fourier samples) is approximately 6–10 times that of an FFT, and has the same dependence of O ( n 2 log ⁡ n ) {\displaystyle O(n^{2}\log n)} for an image of size n × n {\displaystyle n\times n} . == Curvelet construction == To construct a basic curvelet ϕ {\displaystyle \phi } and provide a tiling of the 2-D frequency space, two main ideas should be followed: Consider polar coordinates in frequency domain Construct curvelet elements being locally supported near wedges The number of wedges is N j = 4 ⋅ 2 ⌈ j 2 ⌉ {\displaystyle N_{j}=4\cdot 2^{\left\lceil {\frac {j}{2}}\right\rceil }} at the scale 2 − j {\displaystyle 2^{-j}} , i.e., it doubles in each second circular ring. Let ξ = ( ξ 1 , ξ 2 ) T {\displaystyle {\boldsymbol {\xi }}=\left(\xi _{1},\xi _{2}\right)^{T}} be the variable in frequency domain, and r = ξ 1 2 + ξ 2 2 , ω = arctan ⁡ ξ 1 ξ 2 {\displaystyle r={\sqrt {\xi _{1}^{2}+\xi _{2}^{2}}},\omega =\arctan {\frac {\xi _{1}}{\xi _{2}}}} be the polar coordinates in the frequency domain. We use the ansatz for the dilated basic curvelets in polar coordinates: ϕ ^ j , 0 , 0 := 2 − 3 j 4 W ( 2 − j r ) V ~ N j ( ω ) , r ≥ 0 , ω ∈ [ 0 , 2 π ) , j ∈ N 0 {\displaystyle {\hat {\phi }}_{j,0,0}:=2^{\frac {-3j}{4}}W(2^{-j}r){\tilde {V}}_{N_{j}}(\omega ),r\geq 0,\omega \in [0,2\pi ),j\in N_{0}} To construct a basic curvelet with compact support near a ″basic wedge″, the two windows W {\displaystyle W} and V ~ N j {\displaystyle {\tilde {V}}_{N_{j}}} need to have compact support. Here, we can simply take W ( r ) {\displaystyle W(r)} to cover ( 0 , ∞ ) {\displaystyle (0,\infty )} with dilated curvelets and V ~ N j {\displaystyle {\tilde {V}}_{N_{j}}} such that each circular ring is covered by the translations of V ~ N j {\displaystyle {\tilde {V}}_{N_{j}}} . Then the admissibility yields ∑ j = − ∞ ∞ | W ( 2 − j r ) | 2 = 1 , r ∈ ( 0 , ∞ ) . {\displaystyle \sum _{j=-\infty }^{\infty }\left|W(2^{-j}r)\right|^{2}=1,r\in (0,\infty ).} see Window Functions for more information For tiling a circular ring into N {\displaystyle N} wedges, where N {\displaystyle N} is an arbitrary positive integer, we need a 2 π {\displaystyle 2\pi } -periodic nonnegative window V ~ N {\displaystyle {\tilde {V}}_{N}} with support inside [ − 2 π N , 2 π N ] {\displaystyle \left[{\frac {-2\pi }{N}},{\frac {2\pi }{N}}\right]} such that ∑ l = 0 N − 1 V ~ N 2 ( ω − 2 π l N ) = 1 {\displaystyle \sum _{l=0}^{N-1}{\tilde {V}}_{N}^{2}\left(\omega -{\frac {2\pi l}{N}}\right)=1} , for all ω ∈ [ 0 , 2 π ) {\displaystyle \omega \in \left[0,2\pi \right)} , V ~ N {\displaystyle {\tilde {V}}_{N}} can be simply constructed as 2 π {\displaystyle 2\pi } -periodizations of a scaled window V ( N ω 2 π ) {\displaystyle V\left({\frac {N\omega }{2\pi }}\right)} . Then, it follows that ∑ l = 0 N j − 1 | 2 3 j 4 ϕ ^ j , 0 , 0 ( r , ω − 2 π l N j ) | 2 = | W ( 2 − j r ) | 2 ∑ l = 0 N j − 1 V ~ N j 2 ( ω − 2 π l N ) = | W ( 2 − j r ) | 2 {\displaystyle \sum _{l=0}^{N_{j}-1}\left|2^{\frac {3j}{4}}{\hat {\phi }}_{j,0,0}\left(r,\omega -{\frac {2\pi l}{N_{j}}}\right)\right|^{2}=\left|W(2^{-j}r)\right|^{2}\sum _{l=0}^{N_{j}-1}{\tilde {V}}_{N_{j}}^{2}\left(\omega -{\frac {2\pi l}{N}}\right)=\left|W(2^{-j}r)\right|^{2}} For a complete covering of the frequency plane including the region around zero, we need to define a low pass element ϕ ^ − 1 := W 0 ( | ξ | ) {\displaystyle {\hat {\phi }}_{-1}:=W_{0}(\left|\xi \right|)} with W 0 2 ( r ) 2 := 1 − ∑ j = 0 ∞ W ( 2 − j r ) 2 {\displaystyle W_{0}^{2}(r)^{2}:=1-\sum _{j=0}^{\infty }W(2^{-j}r)^{2}} that is supported on the unit circle, and where we do not consider any rotation. == Applications == Image processing Seismic exploration Fluid mechanics PDEs solving Compressed sensing

  Read more →
• 

  Sanctuary (app)

  Sanctuary is a mobile app focusing on astrology and mystical services. Users enter their birthday, time of birth, and place of birth information into the app and receive a birth chart as well as daily horoscope readings. Users can also sign up for a monthly membership and receive on-demand astrological readings via a text message format. The service has been described as being “Talkspace for astrology" and "Uber for astrological readings". The mobile app uses an A.I.-driven interface. On May 14, 2019, Apple featured Sanctuary as the App of the Day. == History == Sanctuary initially began as project within the incubator of Lorne Michaels’ Broadway Video Ventures. The app officially launched on March 21, 2019. Its backers include Broadway Video Ventures, Greycroft Partners, and Shari Redstone.

  Read more →
• 

  Collaboration-oriented architecture

  Collaboration Oriented Architecture (COA) is a computer system that is designed to collaborate, or use services, from systems that are outside of the operators control. Collaboration Oriented Architecture will often use Service Oriented Architecture to deliver the technical framework. Collaboration Oriented Architecture is the ability to collaborate between systems that are based on the Jericho Forum principles or "Commandments". Bill Gates and Craig Mundie (Microsoft) clearly articulated the need for people to work outside of their organizations in a secure and collaborative manner in their opening keynote to the RSA Security Conference in February 2007. Successful implementation of a Collaboration Oriented Architecture implies the ability to successfully inter-work securely over the Internet and will typically mean the resolution of the problems that come with de-perimeterisation. == Etymology == The term Collaboration Oriented Architectures was defined and developed in a meeting of the Jericho Forum at a meeting held at HSBC on 6 July 2007. == Definition == The key elements that qualify a security architecture as a Collaboration Oriented Architecture are as follows; Protocol: Systems use appropriately secure protocols to communicate. Authentication: The protocol is authenticated with user and/or system credentials. Federation: User and/or systems credentials are accepted and validated by systems that are not under your (locus of) control. Network Agnostic: The design does not rely on a secure network, thus it will operate securely from an Intranet to raw-Internet Trust: The collaborating system have the capacity to be able to confirm to a specified degree of confidence that the components in a transaction chain have. Risk: The collaborating systems can make a risk assessment on any transaction based on the communicated levels of required trust, based on the required degree of identity, confidentiality, integrity, availability. == Authentication == Working in a collaborative multi-sourced environment implies the need for authentication, authorization and accountability which must interoperate / exchange outside of your locus / area of control. People/systems must be able to manage permissions of resources and rights of users they don't control There must be capability of trusting an organization, which can authenticate individuals or groups, thus eliminating the need to create separate identities In principle, only one instance of person / system / identity may exist, but privacy necessitates the support for multiple instances, or one instance with multiple facets, often referred to as personas Systems must be able to pass on security credentials /assertions Multiple loci (areas) of control must be supported

  Read more →