AI Headshot Business

AI Headshot Business — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

• 

  Graphics address remapping table

  The graphics address remapping table (GART), also known as the graphics aperture remapping table, or graphics translation table (GTT), is an I/O memory management unit (IOMMU) used by Accelerated Graphics Port (AGP) and PCI Express (PCIe) graphics cards. The GART allows the graphics card direct memory access (DMA) to the host system memory, through which buffers of textures, polygon meshes and other data are loaded. AMD later reused the same mechanism for I/O virtualization with other peripherals including disk controllers and network adapters. A GART is used as a means of data exchange between the main memory and video memory through which buffers (i.e. paging/swapping) of textures, polygon meshes and other data are loaded, but can also be used to expand the amount of video memory available for systems with only integrated or shared graphics (i.e. no discrete or inbuilt graphics processor), such as Intel HD Graphics processors. However, this type of memory (expansion) remapping has a caveat that affects the entire system: specifically, any GART, pre-allocated memory becomes pooled and cannot be utilised for any other purposes but graphics memory and display rendering. Since PCI Express, the GART is extended to the GTT (Graphics Translation Table), which act as a buffer or cache between system memory and graphics card, and in PCI Express, the GTT buffer size is changeable by the GPU driver. == Operating system support == === Windows === Support for AGP GART was added since Windows 95 OSR2. Later, support for GTT was added since Windows XP SP2 and Windows Vista. === Linux === Jeff Hartmann served as the primary maintainer of the Linux kernel's agpgart driver, which began as part of Brian Paul's Utah GLX accelerated Mesa 3D driver project. The developers primarily targeted Linux 2.4.x kernels, but made patches available against older 2.2.x kernels. Dave Jones heavily reworked agpgart for the Linux 2.6.x kernels, along with more contributions from Jeff Hartmann. === FreeBSD === In FreeBSD, the agpgart driver appeared in its 4.1 release. === Solaris === AGPgart support was introduced into Solaris Express Developer Edition as of its 7/05 release.

  Read more →
• 

  Social media measurement

  Social media measurement, also called social media controlling, is the management practice of evaluating successful social media communications of brands, companies, or other organizations. Key performance indicators may be measured by extracting information from social media channels, such as blogs, wikis, micro-blogs such as Twitter, social networking sites, or video/photo sharing websites, forums from time to time. It is also used by companies to gauge current trends in the industry. The process first gathers data from different websites and then performs analysis based on different metrics like time spent on the page, click through rate, content share, comments, text analytics to identify positive or negative emotions about the brand. Some other social media metrics include share of voice, owned mentions, and earned mentions. The social media measurement process starts with defining a goal that needs to be achieved and defining the expected outcome of the process. The expected outcome varies per the goal and is usually measured by a variety of metrics. This is followed by defining possible social strategies to be used to achieve the goal. Then the next step is designing strategies to be used and setting up configuration tools that ease the process of collecting the data. In the next step, strategies and tools are deployed in real-time. This step involves conducting Quality Assurance tests of the methods deployed to collect the data. And in the final step, data collected from the system is analyzed and if the need arises, it is refined on the run time to enhance the methodologies used. The last step ensures that the result obtained is more aligned with the goal defined in the first step. == Data Acquisition == Acquiring data from social media is in demand of an exploring the user participation and population with the purpose of retrieving and collecting so many kinds of data(ex: comments, downloads etc.). There are several prevalent techniques to acquire data such as Network traffic analysis, Ad-hoc application and Crawling Network Traffic Analysis - Network traffic analysis is the process of capturing network traffic and observing it closely to determine what is happening in the network. It is primarily done to improve the performance, security and other general management of the network. However concerned about the potential tort of privacy on the Internet, network traffic analysis is always restricted by the government. Furthermore, high-speed links are not adaptable to traffic analysis because of the possible overload problem according to the packet sniffing mechanism Ad-hoc Application - Ad-hoc application is a kind of application that provides services and games to social network users by developing the APIs offered by social network companies (Facebook Developer Platform). The infrastructure of Ad-hoc application allows the user to interact with the interface layer instead of the application servers. The API provides a path for application to access information after the user login. Moreover, the size of the data set collected vary with the popularity of the social media platform i.e. social media platforms having high number of users will have more data than platforms having less user base. Scraping is a process in which the APIs collect online data from social media. The data collected from Scraping is in raw format. However, having access to these types of data is a bit difficult because of its commercial value. Crawling - Crawling is a process in which a web crawler creates indexes of all the words in a web-page, stores them, then follows all the hyperlinks and indexes on that page and again stores them. It is the most popular technique for data acquisition and is also well known for its easy operation based on prevalent Object-Orientated Programming Language (Java or Python etc.). And most important, social network companies (YouTube, Flicker, Facebook, Instagram, etc.) are friendly to crawling techniques by providing public APIs == Applications == === For branding === Monitoring social media allows researchers to find insights into a brand's overall visibility on social media, to measure the impact of campaigns, to identify opportunities for engagement, to assess competitor activity and share of voice, and to detect impending crises. It can also provide valuable information about emerging trends and what consumers and clients think about specific topics, brands or products. This is the work of a cross-section of groups that include market researchers, PR staff, marketing teams, social-engagement, and community staff, agencies and sales teams. Several different providers have developed tools to facilitate the monitoring of a variety of social media channels - from blogging to internet video to internet forums. This allows companies to track what consumers say about their brands and actions. Companies can then react to these conversations and interact with consumers through social media platforms. === In government === Apart from commercial applications, social media monitoring has become a pervasive technique applied by public organizations and governments. Monitoring is a tradition within the public sector, and social-media monitoring provides a real-time approach to detecting and responding to social developments. Governments have come to realize the need for strategies to cope with surprises from the rapid expansion of public issues. Sobkowicz introduced a framework with three blocks of social-media opinion tracking, simulating and forecasting. It includes: real-time detection of emotions, topics and opinions information-flow modelling and agent-based simulation modeling of opinion networks Bekkers introduced the application of social media monitoring in the Netherlands. Public organizations in the Netherlands (such as the Tax Agency and the Education Ministry) have started to use social media monitoring to obtain better insights into the sentiments of target groups. On the one hand, the public sector will be enabled to provide timely and efficient answers to the public by using social media monitoring techniques, but on the other hand, they also have to deal with concerns about ethical issues such as transparency and privacy. == Quantifying social media == Social media management software (SMMS) is an application program or software that facilitates an organization's ability to successfully engage in social media across different communication channels. SMMS is used to monitor inbound and outbound conversations, support customer interaction, audit or document social marketing initiatives and evaluate the usefulness of a social media presence. It can be difficult to measure all social media conversations. Due to privacy settings and other issues, not all social media conversations can be found and reported by monitoring tools. However, whilst social media monitoring cannot give absolute figures, it can be extremely useful for identifying trends and for benchmarking, in addition to the uses mentioned above. These findings can, in turn, influence and shape future business decisions. In order to access social media data (posts, Tweets, and meta-data) and to analyze and monitor social media, many companies use software technologies built for business. These range from in-platform analytics dashboards to dedicated third-party platforms, which offer more advanced capabilities including cross-platform audience intelligence, sentiment analysis, and trend detection at scale. == Location-based == Most social media networks allow users to add a location to their posts (reference all of our feeds). The location can be classified as either 'at-the-location' or 'about-the-location'. "'At-the-location' services can be defined as services where location-based content is created at the geographic location. 'About-the-location' services can be defined as services which are referring to a particular location but the content is not necessarily created in this particular physical place." The added information available from geotagged (link to Geotagging article) posts means that they can be displayed on a map. This means that a location can be used as the start of a social media search rather than a keyword or hashtag. This has major implications for disaster relief, event monitoring, safety and security professionals since a large portion of their job is related to tracking and monitoring specific locations. == Technologies used == Various monitoring platforms use different technologies for social media monitoring and measurement. These technology providers may connect to the API provided by social platforms that are created for 3rd party developers to develop their own applications and services that access data. Facebook's Graph API is one such API that social media monitoring solution products would connect to pull data from. Some social media monitoring and analytics companies use calls to data providers each time an end-user d

  Read more →
• 

  Cipher

  In cryptography, a cipher (or cypher) is an algorithm for performing encryption or decryption—a series of well-defined steps that can be followed as a procedure. An alternative, less common term is encipherment. To encipher or encode is to convert information into cipher or code. In common parlance, "cipher" is synonymous with "code", as they are both a set of steps that encrypt a message; however, the concepts are distinct in cryptography, especially classical cryptography. Codes generally substitute different length strings of characters in the output, while ciphers generally substitute the same number of characters as are input. A code maps one meaning with another. Words and phrases can be coded as letters or numbers. Codes typically have direct meaning from input to key. Codes primarily function to save time. Ciphers are algorithmic. The given input must follow the cipher's process to be solved. Ciphers are commonly used to encrypt written information. Codes operated by substituting according to a large codebook which linked a random string of characters or numbers to a word or phrase. For example, "UQJHSE" could be the code for "Proceed to the following coordinates.". When using a cipher the original information is known as plaintext, and the encrypted form as ciphertext. The ciphertext message contains all the information of the plaintext message, but is not in a format readable by a human or computer without the proper mechanism to decrypt it. The operation of a cipher usually depends on a piece of auxiliary information, called a key (or, in traditional NSA parlance, a cryptovariable). The encrypting procedure is varied depending on the key, which changes the detailed operation of the algorithm. A key must be selected before using a cipher to encrypt a message, with some exceptions such as ROT13 and Atbash. Most modern ciphers can be categorized in several ways: By whether they work on blocks of symbols usually of a fixed size (block ciphers), or on a continuous stream of symbols (stream ciphers). By whether the same key is used for both encryption and decryption (symmetric key algorithms), or if a different key is used for each (asymmetric key algorithms). If the algorithm is symmetric, the key must be known to the recipient and sender and to no one else. If the algorithm is an asymmetric one, the enciphering key is different from, but closely related to, the deciphering key. If one key cannot be deduced from the other, the asymmetric key algorithm has the public/private key property and one of the keys may be made public without loss of confidentiality. == Etymology == Originating from the Sanskrit word for zero शून्य (śuṇya), via the Arabic word صفر (ṣifr), the word "cipher" spread to Europe as part of the Arabic numeral system during the Middle Ages. The Roman numeral system lacked the concept of zero, and this limited advances in mathematics. In this transition, the word was adopted into Medieval Latin as cifra, and then into Middle French as cifre. This eventually led to the English word cipher (also spelt cypher). One theory for how the term came to refer to encoding is that the concept of zero was confusing to Europeans, and so the term came to refer to a message or communication that was not easily understood. The term cipher was later also used to refer to any Arabic digit, or to calculation using them, so encoding text in the form of Arabic numerals is literally converting the text to "ciphers". == Versus codes == In casual contexts, "code" and "cipher" can typically be used interchangeably; however, the technical usages of the words refer to different concepts. Codes contain meaning; words and phrases are assigned to numbers or symbols, creating a shorter message. An example of this is the commercial telegraph code which was used to shorten long telegraph messages which resulted from entering into commercial contracts using exchanges of telegrams. Another example is given by whole word ciphers, which allow the user to replace an entire word with a symbol or character, much like the way written Japanese utilizes Kanji (meaning Chinese characters in Japanese) characters to supplement the native Japanese characters representing syllables. An example using English language with Kanji could be to replace "The quick brown fox jumps over the lazy dog" by "The quick brown 狐 jumps 上 the lazy 犬". Stenographers sometimes use specific symbols to abbreviate whole words. Ciphers, on the other hand, work at a lower level: the level of individual letters, small groups of letters, or, in modern schemes, individual bits and blocks of bits. Some systems used both codes and ciphers in one system, using superencipherment to increase the security. In some cases the terms codes and ciphers are used synonymously with substitution and transposition, respectively. Historically, cryptography was split into a dichotomy of codes and ciphers, while coding had its own terminology analogous to that of ciphers: "encoding, codetext, decoding" and so on. However, codes have a variety of drawbacks, including susceptibility to cryptanalysis and the difficulty of managing a cumbersome codebook. Because of this, codes have fallen into disuse in modern cryptography, and ciphers are the dominant technique. == Types == There are a variety of different types of encryption. Algorithms used earlier in the history of cryptography are substantially different from modern methods, and modern ciphers can be classified according to how they operate and whether they use one or two keys. === Historical === The Caesar Cipher is one of the earliest known cryptographic systems. Julius Caesar used a cipher that shifts the letters in the alphabet in place by three and wrapping the remaining letters to the front to write to Marcus Tullius Cicero in approximately 50 BC. Historical pen and paper ciphers used in the past are sometimes known as classical ciphers. They include simple substitution ciphers (such as ROT13) and transposition ciphers (such as a Rail Fence Cipher). For example, "GOOD DOG" can be encrypted as "PLLX XLP" where "L" substitutes for "O", "P" for "G", and "X" for "D" in the message. Transposition of the letters "GOOD DOG" can result in "DGOGDOO". These simple ciphers and examples are easy to crack, even without plaintext-ciphertext pairs. In the 1640s, the Parliamentarian commander, Edward Montagu, 2nd Earl of Manchester, developed ciphers to send coded messages to his allies during the English Civil War. The English theologian John Wilkins published a book in 1641 titled "Mercury, or The Secret and Swift Messenger" and described a musical cipher wherein letters of the alphabet were substituted for music notes. This species of melodic cipher was depicted in greater detail by author Abraham Rees in his book Cyclopædia (1778). Simple ciphers were replaced by polyalphabetic substitution ciphers (such as the Vigenère) which changed the substitution alphabet for every letter. For example, "GOOD DOG" can be encrypted as "PLSX TWF" where "L", "S", and "W" substitute for "O". With even a small amount of known or estimated plaintext, simple polyalphabetic substitution ciphers and letter transposition ciphers designed for pen and paper encryption are easy to crack. It is possible to create a secure pen and paper cipher based on a one-time pad, but these have other disadvantages. During the early twentieth century, electro-mechanical machines were invented to do encryption and decryption using transposition, polyalphabetic substitution, and a kind of "additive" substitution. In rotor machines, several rotor disks provided polyalphabetic substitution, while plug boards provided another substitution. Keys were easily changed by changing the rotor disks and the plugboard wires. Although these encryption methods were more complex than previous schemes and required machines to encrypt and decrypt, other machines such as the British Bombe were invented to crack these encryption methods. === Modern === Modern encryption methods can be divided by two criteria: by type of key used, and by type of input data. By type of key used ciphers are divided into: symmetric key algorithms (Private-key cryptography), where one same key is used for encryption and decryption, and asymmetric key algorithms (Public-key cryptography), where two different keys are used for encryption and decryption. In a symmetric key algorithm (e.g., DES and AES), the sender and receiver must have a shared key set up in advance and kept secret from all other parties; the sender uses this key for encryption, and the receiver uses the same key for decryption. The design of AES (Advanced Encryption System) was beneficial because it aimed to overcome the flaws in the design of the DES (Data encryption standard). AES's designer's claim that the common means of modern cipher cryptanalytic attacks are ineffective against AES due to its design structure. Ciphers can be distinguished into two types by the type o

  Read more →
• 

  Data preservation

  Data preservation is the act of conserving and maintaining both the safety and integrity of data. Preservation is done through formal activities that are governed by policies, regulations and strategies directed towards protecting and prolonging the existence and authenticity of data and its metadata. Data can be described as the elements or units in which knowledge and information is created, and metadata are the summarizing subsets of the elements of data; or the data about the data. The main goal of data preservation is to protect data from being lost or destroyed and to contribute to the reuse and progression of the data. == History == Most historical data collected over time has been lost or destroyed. War and natural disasters combined with the lack of materials and necessary practices to preserve and protect data has caused this. Usually, only the most important data sets were saved, such as government records and statistics, legal contracts and economic transactions. Scientific research and doctoral theses data have mostly been destroyed from improper storage and lack of data preservation awareness and execution. Over time, data preservation has evolved and has generated importance and awareness. We now have many different ways to preserve data and many different important organizations involved in doing so. The first digital data preservation storage solutions appeared in the 1950s, which were usually flat or hierarchically structured. While there were still issues with these solutions, it made storing data much cheaper, and more easily accessible. In the 1970s relational databases as well as spreadsheets appeared. Relational data bases structure data into tables using structured query languages which made them more efficient than the preceding storage solutions, and spreadsheets hold high volumes of numeric data which can be applied to these relational databases to produce derivative data. More recently, non-relational (non-structured query language) databases have appeared as complements to relational databases which hold high volumes of unstructured or semi-structured data. == Importance == The scope of data preservation is vast. Everything from governmental to business records to art essentially can be represented as data, and is amenable to be lost. This then leads to loss of human history, for perpetuity. Data can be lost on a small or independent scale whether it's personal data loss, or data loss within businesses and organizations, as well as on a larger or national or global scale which can negatively and potentially permanently affect things such as environmental protection, medical research, homeland security, public health and safety, economic development and culture. The mechanisms of data loss are also as many as they are varied, spanning from disaster, wars, data breaches, negligence, all the way through simple forgetting to natural decay. Ways in which data collections can be used when preserved and stored properly can be seen through the U.S. Geological Survey, which stores data collections on natural hazards, natural resources, and landscapes. The data collected by the Survey is used by federal and state land management agencies towards land use planning and management, and continually needs access to historical reference data. == Related Concepts == In contrast, data holdings are collections of gathered data that are informally kept, and not necessarily prepared for long-term preservation. For example, a collection or back-up of personal files. Data holdings are generally the storage methods used in the past when data has been lost due to environmental and other historical disasters. Furthermore, data retention differs from data preservation in the sense that by definition, to retain an object (data) is to hold or keep possession or use of the object. To preserve an object is to protect, maintain and keep up for future use. Retention policies often circle around when data should be deleted on purpose as well, and held from public access, while preservation prioritizes permanence and more widely shared access. Thus, data preservation exceeds the concept of having or possessing data or back up copies of data. Data preservation ensures reliable access to data by including back-up and recovery mechanisms that precede the event of a disaster or technological change. == Methods == === Digital === Digital preservation, is similar to data preservation, but is mainly concerned with technological threats, and solely digital data. Essentially digital data is a set of formal activities to enable ongoing or persistent use and access of digital data exceeding the occurrence of technological malfunction or change. Digital preservation is aware of the inevitable change in technology and protocols, and prepares for data that will need to be accessible across new types of technologies and platforms while the integrity of the data and metadata are being conserved. Technology, while providing great process in conserving data that may not have been possible in the past, is also changing at such a quick rate that digital data may not be accessible anymore due to the format being incompatible with new software. Without the use of data preservation much of our existing digital data is at risk. The majority of methods used towards data preservation today are digital methods, which are so far the most effective methods that exist. === Archives === Archives are a collection of historical documents and records. Archives contribute and work towards the preservation of data by collecting data that is well organized, while providing the appropriate metadata to confirm it. An example of an important data archive is The LONI Image Data Archive, which is an archive that collects data regarding clinical trials and clinical research studies. === Catalogues, directories and portals === Catalogues, directories and portals are consolidated resources which are kept by individual institutions, and are associated with data archives and holdings. In other words, the data is not presented on the site, but instead might act as metadata and aggregators, and may administer thorough inventories. === Repositories === Repositories are places where data archives and holdings can be accessed and stored. The goal of repositories is to make sure that all requirements and protocols of archives and holdings are being met, and data is being certified to ensure data integrity and user trust. Single-site Repositories A repository that holds all data sets on a single site. An example of a major single-site repository the Data Archiving and Networking Services which is a repository which provides ongoing access to digital research resources for the Netherlands. Multi-Site Repositories A repository that hosts data set on multiple institutional sites. An example of a well known multi-site repository is OpenAIRE which is a repository that hosts research data and publications collaborating all of the EU countries and more. OpenAIRE promotes open scholarship and seeks to improves discover-ability and re-usability of data. Trusted Digital Repository A repository that seeks to provide reliable, trusted access over a long period of time. The repository can be single or multi-sited but must cooperate with the Reference Model for an Open Archival Information System, as well as adhere to a set of rules or attributes that contribute to its trust such as having persistent financial responsibility, organizational buoyancy, administrative responsibility security and safety. An example of a trusted digital repository is The Digital Repository of Ireland (DRI) which is a multi-site repository that hosts Ireland's humanity and social science data sets. === Cyber Infrastructures === Cyber infrastructures which consists of archive collections which are made available through the system of hardware, technologies, software, policies, services and tools. Cyber infrastructures are geared towards the sharing of data supporting peer-to-peer collaborations and a cultural community. An example of a major cyber-infrastructure is The Canadian Geo-spatial Data Infrastructure which provides access to spatial data in Canada.

  Read more →
• 

  Subpixel rendering

  Subpixel rendering is a method used to increase the effective resolution of a color display device. It utilizes the composition of each pixel, which consists of three subpixels of which are red, green, and blue that can each be individually addressable on the display matrix. Subpixel rendering is primarily used for text rendering on standard DPI displays. Despite the inherent color anomalies, it can also be used to render general graphics. == History == The origin of subpixel rendering as used today remains controversial. Apple Inc., IBM, and Microsoft patented various implementations that differed in technical details owing to the different purposes for which their technologies were intended. Microsoft held several patents in the United States for subpixel rendering technology used in text rendering on RGB Stripe layouts. The patents 6,219,025; 6,239,783; 6,307,566; 6,225,973; 6,243,070; 6,393,145; 6,421,054; 6,282,327; and 6,624,828 were filed between October 7, 1998, and October 7, 1999, and expired on July 30, 2019. Analysis of the patent by FreeType indicates that the patent does not cover the idea of subpixel rendering, but rather the actual filter used as a last step to balance the color. Microsoft's patent describes the smallest possible filter that distributes each subpixel value equally among the R, G, and B pixels. Any other filter will either be blurrier or will introduce color artifacts. Apple was able to use it in Mac OS X due to a patent cross-licensing agreement. == Characteristics == A single pixel on a color display is made of several subpixels, typically three arranged left-to-right as red, green, and blue (RGB). The components are readily visible with a small magnifying glass, such as a loupe. These pixel components appear as a single color to the human eye because of blurring by optics and spatial integration by nerve cells in the eye. However, the eye is much more sensitive to the location. Therefore, turning on the G and B of one pixel and the R of the next pixel to the right will produce a white dot, but it will appear to be 1/3 of a pixel to the right of the white dot that would be seen from the RGB of only the first pixel. Subpixel rendering leverages this to provide three times the horizontal resolution of the rendered image. However, it has to blur this image to produce the correct color by ensuring the same amount of red, green, and blue are turned on as when no subpixel rendering is being done. Subpixel rendering does not necessitate the use of antialiasing. It gives a smoother result regardless of whether antialiasing is used or not since it artificially increases the resolution. However, it introduces color aliasing since subpixels are colored. Subsequent filtering applied to remove the color artifacts is a form of antialiasing, although its purpose is not smoothing jagged shapes as in conventional antialiasing. Subpixel rendering requires the software to know the layout of the subpixels. The most common reason it is wrong is monitors that can be rotated 90 (or 180) degrees, though monitors are manufactured with other arrangements of the subpixels, such as BGR or in triangles, or with 4 colors like RGBW squares. On any such display the result of incorrect subpixel rendering will be worse than if no subpixel rendering was done at all (it will not produce color artifacts, but it will produce noisy edges). == Implementations == === Apple II === Steve Gibson has claimed that the Apple II, introduced in 1977, supports an early form of subpixel rendering in its high-resolution (280×192) graphics mode. The Wozniak patent only used 2 "sub-pixels". The bytes that comprise the Apple II high-resolution screen buffer contain seven visible bits (each corresponding directly to a pixel) and a flag bit used to select between purple/green or blue/orange color sets. Each pixel, since it is represented by a single bit, is either on or off; there are no bits within the pixel itself for specifying color or brightness. Color is instead created as an artifact of the NTSC color encoding scheme, determined by horizontal position: pixels with even horizontal coordinates are always purple (or blue, if the flag bit is set), and odd pixels are always green (or orange). Two lit pixels next to each other are always white, regardless of whether the pair is even/odd or odd/even, and irrespective of the value of the flag bit. This is an approximation, but it is what most programmers of the time would have in mind while working with the Apple's high-resolution mode. Gibson's example claims that because two adjacent bits form a white block, there are, in fact, two bits per pixel: one that activates the pixel's purple left half and the other that activates its green right half. If the programmer instead activates the green right half of a pixel and the purple left half of the next pixel, the result is a white block 1/2 pixel to the right, which is indeed an instance of subpixel rendering. However, it is not clear whether any programmers of the Apple II have considered the pairs of bits as pixels—instead calling each bit a pixel. The flag bit in each byte affects color by shifting pixels half a pixel-width to the right. This half-pixel shift was exploited by some graphics software, such as HRCG (High-Resolution Character Generator), an Apple utility that displayed text using the high-resolution graphics mode, to smooth diagonals. === ClearType === Microsoft announced its subpixel rendering technology, called ClearType, at COMDEX in 1998. Microsoft published a paper in May 2000, Displaced Filtering for Patterned Displays, describing the filtering behind ClearType. It was then made available in Windows XP. Still, it was not activated by default until Windows Vista, while Windows XP OEMs could and did change the default setting. === FreeType === FreeType, the library used by most current software on the X Window System, contains two open source implementations. The original implementation uses the ClearType antialiasing filters and carries the following notice: "The colour filtering algorithm of Microsoft's ClearType technology for subpixel rendering is covered by patents; for this reason, the corresponding code in FreeType is disabled by default. Note that subpixel rendering per se is prior art; using a different colour filter thus easily circumvents Microsoft's patent claims." FreeType offers a variety of color filters. Since version 2.6.2, the default filter is light, a filter that is both normalized (value sums up to 1) and color-balanced (eliminate color fringes at the cost of resolution). Since version 2.8.1, a second implementation exists, called Harmony, that "offers high quality LCD-optimized output without resorting to ClearType techniques of resolution tripling and filtering". This is the method enabled by default. When using this method, "each color channel is generated separately after shifting the glyph outline, capitalizing on the fact that the color grids on LCD panels are shifted by a third of a pixel. This output is indistinguishable from ClearType with a light 3-tap filter." Since the Harmony method does not require additional filtering, it is not covered by the ClearType patents. === CoolType === Adobe created their own subpixel renderer called CoolType, allowing them to display documents the same way across various operating systems: Windows, MacOS, Linux etc. When it was launched around the year 2001, CoolType supported a wider range of fonts than Microsoft's ClearType, which at the time was limited to TrueType fonts. In contrast, Adobe's CoolType also supported PostScript fonts (and their OpenType equivalents). === macOS === Mac OS X (later OS X, now macOS) also used subpixel rendering, as part of Quartz 2D. However, it was removed after the introduction of Retina displays. Unlike Microsoft's implementation, which favors a tight fit to the grid (font hinting) to maximize legibility, Apple's implementation prioritizes the shape of the glyphs as set out by their designer.

  Read more →
• 

  Data monetization

  Data monetization, a form of monetization, may refer to the act of generating measurable economic benefits from available data sources (analytics). Less commonly, it may also refer to the act of monetizing data services. In the case of analytics, typically, these benefits accrue as revenue or expense savings, but may also include market share or corporate market value gains. Data monetization leverages data generated through business operations, available exogenous data or content, as well as data associated with individual actors such as that collected via electronic devices and sensors participating in the internet of things. For example, the ubiquity of the internet of things is generating location data and other data from sensors and mobile devices at an ever-increasing rate. When this data is collated against traditional databases, the value and utility of both sources of data increases, leading to tremendous potential to mine data for social good, research and discovery, and achievement of business objectives. Closely associated with data monetization are the emerging data as a service models for transactions involving data by the data item. There are three ethical and regulatory vectors involved in data monetization due to the sometimes conflicting interests of actors involved in the digital supply chain. The individual data creator who generates files and records through his own efforts or owns a device such as a sensor or a mobile phone that generates data has a claim to ownership of data. The business entity that generates data in the course of its operations, such as its transactions with financial institutions or risk factors discovered through feedback from customers also has a claim on data captured through their systems and platforms. However, the person that contributed the data may also have a legitimate claim on the data. Internet platforms and service providers, such as Google or Facebook that require a user to forgo some ownership interest in their data in exchange for use of the platform also have a legitimate claim on the data. Thus the practice of data monetization, although common since 2000, is now getting increasing attention from regulators. The European Union and the United States Congress have begun to address these issues. For instance, in the financial services industry, regulations involving data are included in the Gramm–Leach–Bliley Act and Dodd-Frank. Some individual creators of data are shifting to using personal data vaults and implementing vendor relationship management concepts as a reflection of an increasing resistance to their data being federated or aggregated and resold without compensation. Groups such as the Personal Data Ecosystem Consortium, Patient privacy rights, and others are also challenging corporate cooptation of data without compensation. Financial services companies are a relatively good example of an industry focused on generating revenue by leveraging data. Credit card issuers and retail banks use customer transaction data to improve targeting of cross-sell offers. Partners are increasingly promoting merchant based reward programs which leverage a bank’s data and provide discounts to customers at the same time. == Types of data monetization == Internal data monetization - An organization's data is used internally, resulting in economic benefit. This is commonly the case in organizations using analytics to uncover insights, resulting in improved profit, cost savings or the avoidance of risk. Internal data monetization is currently the most common form of monetization, requiring far fewer security, intellectual property, and legal precautions when compared to other types. The potential economic gains from this type of data monetization are limited by the organization's internal structure and situation. External data monetization - A person or organization makes data they possess available on a for-fee basis to external parties, or as a broker for same. This type of monetization is less common and requires various methods to distribute the data to potential buyers and consumers. However, the economic gain that results from collecting data, packaging and distributing it, can be quite large. == Steps == Identification of available data sources – this includes data currently available for monetization as well as other external data sources that may enhance the value of what’s currently available. Connect, aggregate, attribute, validate, authenticate, and exchange data - this allows data to be converted directly into actionable or revenue generating insight or services. Set terms and prices and facilitate data trading - methods for data vetting, storage, and access. For example, many global corporations have locked and siloed data storage infrastructures, which hinders efficient access to data and cooperative and real-time exchange. Perform Research and analytics – draw predictive insights from existing data as a basis for using data for to reduce risk, enhance product development or performance, or improve customer experience or business outcomes. Action and leveraging – the last phase of monetizing data includes determining alternative or improved data centric products, ideas, or services. Examples may include real-time actionable triggered notifications or enhanced channels such as web or mobile response mechanisms. == Pricing variables and factors == A fee for use of a platform to connect buyers and sellers use of a platform to configure, organize, and otherwise process data included in a data trade connecting or including a device or sensor into a data supply chain connecting and credentialing a creator of a data source and a data buyer – often through a federated identity connecting a data source to other data sources to be included in a data supply chain use of an internet service or other transmission services for uploading and downloading data – sometimes, for an individual, through a personal cloud use of encrypted keys to achieve secure data transfer use of a search algorithm specifically designed to tag data sources that contain data points of value to the data buyer linking a data creator or generator to a data collection protocol or form server actions – such as a notification – triggered by an update to a data item or data source included in a data supply chain A price or exchange or other trade value assigned by a data creator or generator to a data item or a data source offered by a data buyer to a data creator assigned by a data buyer for a data item or a data source formatted according to criteria set by a data buyer An incremental fee assigned by a data buyer for a data item or a data set scaled to the reputation of the data creator == Benefits == Improved decision-making that leads to real time crowd sourced research, improved profits, decreased costs, reduced risk and improved compliance More impactful decisions (e.g., make real-time decisions) More timely (lower latency) decisions (e.g., a vendor making purchase recommendations while the customer is still on the phone or in the store, a customer connecting with multiple vendors to discover the best price, triggered notifications when thresholds are reached for data values) More granular decisions (e.g., localized pricing decisions at an individual or device or sensor level versus larger aggregates). Targeted Marketing (e.g., Vendors with access to big data can make targeted advertisements to specific customers within a set data pool decreasing costs for the advertiser and reaching most interested customers) == Frameworks == There are a wide variety of industries, firms and business models related to data monetization. The following frameworks have been offered to help understand the types of business models that are used: Roger Ehrenberg of IA Ventures, a venture capital firm that invests in this sector, has defined three basic types of data product firms: Contributory databases. The magic of these businesses is that a customer provides their own data in exchange for receiving a more robust set of aggregated data back that provides insight into the broader marketplace, or provides a vehicle for expressing a view. Give a little, get a lot back in return – a pretty compelling value proposition, and one that frequently results in a payment from the data contributor in exchange for receiving enriched, aggregated data. Once these contributory databases are developed and customers become reliant on their insights, they become extremely valuable and persistent data assets. Data processing platforms. These businesses create barriers through a combination of complex data architectures, proprietary algorithms, and rich analytics to help customers consume data in whatever form they please. Often these businesses have special relationships with key data providers, that when combined with other data and processed as a whole create valuable differentiation and competitive barriers. Bloomberg is an example of a powerful

  Read more →
• 

  List of broadband over power line deployments

  This is a list of broadband over power line deployments. In this sense, "broadband" usually refers to Internet access using power line communication technology. == BPL pilot projects - 1st Gen (UPA) == === Inactive pilot projects === North America: United States: The United Telecom Council publishes the Federal Communications Commission (FCC)-mandated BPL Interference Resolution website, which provides a list of all BPL deployments in the US. Canada: Quebec: As of 2005, PLC communication technology developed by Ariane Controls is being installed inside and outside existing buildings to control lights and other energy-hungry devices. The cheap devices allow energy consumption to be better managed, and so save much energy and bring a clear return on investment. Western Europe: Sweden: Vattenfall is using PLC technology at 1200 baud for automatic meter reading based on an Iskraemeco product. Central and Eastern Europe, and Eurasia: Russian Federation: Electro-com has deployed widely BPL/PLC technology and offers internet access service in Moscow, Nizhny Novgorod, Ryazan, Kaluga and Rostov-on-Don, planning to extend coverage to main Russian cities. Currently the company does not provide other services, though plans to start providing telephone, and television services someday. Base equipment is a DefiDev modem with a DS2 chipset. The company had 35,000 subscribers and an annual growth of 15-20%. The company has, however, halted operations in Moscow in September, 2008, having sold its client network to an IDSL internet provider. Romania: In January, 2006, the Ministry of Communications and Information Technology introduced a PLC trial in the rural locality of Band, Mureș County, offering phone and broadband internet access for €7 per month. The technology was introduced to 50 households. Montenegro: In March, 2002, the Internet Crna Gora biggest internet provider in Montenegro launched a pilot project in town of Cetinje. Serbia: In August 2002, the Star Engineering from Niš launched a pilot project to show a completely new way to access the Internet, which is a new in that time in most countries around the world. Hungary: The first powerline service in Hungary was realized in September, 2003, in the Riverside apartment house in Budapest by 23Vnet Ltd. The PLC equipment was supplied by ASCOM Powerline. After four months the service was counting 100 users from 450 apartment owners. The bandwidth is 4.5 Mbit/s. Asia, Pacific, and Oceania: Indonesia: PT Kejora Gemilang Internusa "KEJORA", under their banner PLANET BROADBAND, is currently rolling out broadband over power line, with over 300,000 homes expected to be enabled by August 2010. PT. Kejora Gemilang Internusa signed an 8-year Joint Venture concession agreement with ICON+ a division of PT. Perusahaan Listrik Negara (Indonesia electricity company). Under the terms of the agreement PLAnet Broadband are to supply BPL/PLC to Jakarta West and West Java. Another company, PT. Broadband Powerline Indonesia, has been developing broadband over power line in apartment buildings since 2006. PT. BPI also produces data couplers to make broadband over powerline possible in three phases (R, S, T) with a single master. India : In India IIIT Allahabad has completed a project in co-operation with Corinex Communications Canada to implement a prototype of BPL for University campus and nearby villages. Africa and the Middle East: Egypt: The Engineering Office for Integrated Projects (EOIP) has deployed PLC technology widely in Alexandria, Fayed, and Tanta. Based on a locally developed system, the company provides AMR for electricity utilities. Currently, the company has about 70,000 subscribers. South Africa: Goal Technology Solutions (GTS) trialled the technology and is offering service in the suburbs of Pretoria, and plans to extend it to other areas. The tests were done with Mitsubishi equipment using a DS2 chipset, and the company claims a maximum throughput of 90 Mbit/s although initially only "512 Kbits/s ADSL equivalent speeds" are available. Now it uses DefiDev's equipment, and according to GTS's website, it will expand available bandwidth up to 5-20 Mbit/s. Ghana: Cactel Communications, Ltd. successfully deployed an MV solution pilot project in the Graphic Communications Group in Accra in June, 2005. A Cactel Remote Energy Management System (REMS) pilot project for the Electricity Company of Ghana (ECG) is running a 40-user pilot project at the University of Ghana in Legon. The current project combines fiber, radio link, Wi-Fi and PLC to provide broadband internet access and telephony. It showcases the interoperability of PLC technology and the company's expertise in emerging market design and deployment. Cactel hopes to deploy nationally, and is in deliberations with the national stakeholders and with Ghana's Ministry of Communications (MoC). AllTerra Communications successfully implemented a pilot test of broadband over power lines in Akosombo. In partnership with VRA, this test involves demonstrating transmission of broadband from medium to low voltage signals. AllTerra is working with VRA to expand the pilot project to include essential grid management utilities that will help balance and manage the current electricity transmission throughout their various substations. Using IT as a catalyst for economic development, AllTerra is expanding into numerous areas throughout Ghana. Vobiss Solutions Ltd successfully implemented a Hybrid Fibre BPL pilot network within EMEFS Hillview Estate in collaboration with ECG. Saudi Arabia: ElectroNet has been working with the Saudi Electric Company since 2005 on a pilot project using broadband over power lines over medium voltage cables and linking into low voltage distribution within a shopping mall. The pilot project also integrates automatic meter readers. Powerlines Communications Co. Ltd. implemented an AMR pilot project for Saudi Electricity Company in 2006. The project was located in the city of Jeddah on the west coast of Saudi Arabia. Digital KWh meters were installed in parallel with analog KWh meters. Readings taken by the Saudi Electricity Company showed variations of less than 1%. A BPL pilot project was included. Saudi Arabian Computer Management Consultants (SACMAC) has signed a deal to become an official system integrator and distributor for Mitsubishi PLC. It is expected to become a great success, because the existing broadband service, monopolized by the Saudi Telecom Company, is expensive and has poor customer service (some clients report that company techs arrive months after ordering). SACMAC has declined to talk about specifics of availability and price but says it will start rolling out the service in a few months (as of May 2006) and its price will be lower than current broadband providers. === Concluded pilot projects === The following pilot projects have ended: Australia, Tasmania: In November 2007, electricity retailer Aurora Energy ended its involvement with BPL and announced it was switching to Optical Fiber. This ended their commercial trial begun in September 2005, offering BPL services to 500 homes in the suburb of Tolmans Hill near Hobart, which had followed a successful technological trial earlier that year. Portugal ended BPL/PLC deployments in the country in October 2006, reportedly for economic reasons., Russian Federation: In September 2008, Russia's only BPL provider Electro-com ended deployments in Moscow for economic reasons. Spain: In May 2007 Iberdrola and Endesa (the main power companies in Spain) ended their projects to deploy PLC. United States: As of July 2010, the City of Manassas, VA has shut down their BPL deployment, which was the largest in the country. As of April 2007, Motorola has shuttered its Powerline LV Access BPL and reportedly plans to re-purpose the technology to a new system called Powerline MU, which is for use within multiple-unit dwellings. Motorola's system uses only residential-side low-voltage power lines for transmission to reduce the antenna effect, and successfully demonstrated frequency-notching for reduced potential for interference over the Amperion Inc. and Current Technologies LLC systems. Motorola invited the American Radio Relay League to participate with these tests, and even installed the Motorola system at their headquarters. Preliminary results were very positive with regard to interference, because the Motorola system does not use BPL on the powerlines leading up to the neighborhood. The BPL carrier is only used for the last leg of the trip from the pole to the house, and gets the signal to the pole via radio. This limits the interference to the area surrounding the last leg to the house. === Dismantled pilot projects === The following other BPL trials in the US are dismantled as of May 2008:

  Read more →
• 

  Sentiment analysis

  Sentiment analysis (also known as opinion mining) is the use of natural language processing, text analysis, computational linguistics, and biometrics to systematically identify, extract, quantify, and study affective states and subjective information. Sentiment analysis is widely applied to voice of the customer materials such as reviews and survey responses, online and social media, and healthcare materials for applications that range from marketing to customer service to clinical medicine. With the rise of deep language models, such as RoBERTa, more difficult data domains can be analyzed, e.g., news texts where authors typically express their opinion/sentiment less explicitly. == Types == A basic task in sentiment analysis is classifying the polarity of a given text at the document, sentence, or feature/aspect level—whether the expressed opinion in a document, a sentence or an entity feature/aspect is positive, negative, or neutral. Advanced, "beyond polarity" sentiment classification looks, for instance, at emotional states such as enjoyment, anger, disgust, sadness, fear, and surprise. Precursors to sentimental analysis include the General Inquirer, which provided hints toward quantifying patterns in text and, separately, psychological research that examined a person's psychological state based on analysis of their verbal behavior. Subsequently, the method described in a patent by Volcani and Fogel, looked specifically at sentiment and identified individual words and phrases in text with respect to different emotional scales. A current system based on their work, called EffectCheck, presents synonyms that can be used to increase or decrease the level of evoked emotion in each scale. Many other subsequent efforts were less sophisticated, using a mere polar view of sentiment, from positive to negative, such as work by Turney, and Pang who applied different methods for detecting the polarity of product reviews and movie reviews respectively. This work is at the document level. One can also classify a document's polarity on a multi-way scale, which was attempted by Pang and Snyder among others: Pang and Lee expanded the basic task of classifying a movie review as either positive or negative to predict star ratings on either a 3- or a 4-star scale, while Snyder performed an in-depth analysis of restaurant reviews, predicting ratings for various aspects of the given restaurant, such as the food and atmosphere (on a five-star scale). First steps to bringing together various approaches—learning, lexical, knowledge-based, etc.—were taken in the 2004 AAAI Spring Symposium where linguists, computer scientists, and other interested researchers first aligned interests and proposed shared tasks and benchmark data sets for the systematic computational research on affect, appeal, subjectivity, and sentiment in text. Even though in most statistical classification methods, the neutral class is ignored under the assumption that neutral texts lie near the boundary of the binary classifier, several researchers suggest that, as in every polarity problem, three categories must be identified. Moreover, it can be proven that specific classifiers such as the Max Entropy and SVMs can benefit from the introduction of a neutral class and improve the overall accuracy of the classification. There are in principle two ways for operating with a neutral class. Either, the algorithm proceeds by first identifying the neutral language, filtering it out and then assessing the rest in terms of positive and negative sentiments, or it builds a three-way classification in one step. This second approach often involves estimating a probability distribution over all categories (e.g. naive Bayes classifiers as implemented by the NLTK). Whether and how to use a neutral class depends on the nature of the data: if the data is clearly clustered into neutral, negative and positive language, it makes sense to filter the neutral language out and focus on the polarity between positive and negative sentiments. If, in contrast, the data are mostly neutral with small deviations towards positive and negative affect, this strategy would make it harder to clearly distinguish between the two poles. A different method for determining sentiment is the use of a scaling system whereby words commonly associated with having a negative, neutral, or positive sentiment are given an associated number on a −10 to +10 scale (most negative up to most positive) or simply from 0 to a positive upper limit such as +4. This makes it possible to adjust the sentiment of a given term relative to its environment (usually on the level of the sentence). When a piece of unstructured text is analyzed using natural language processing, each concept in the specified environment is given a score based on the way sentiment words relate to the concept and its associated score. This allows movement to a more sophisticated understanding of sentiment, because it is now possible to adjust the sentiment value of a concept relative to modifications that may surround it. Words, for example, that intensify, relax or negate the sentiment expressed by the concept can affect its score. Alternatively, texts can be given a positive and negative sentiment strength score if the goal is to determine the sentiment in a text rather than the overall polarity and strength of the text. There are various other types of sentiment analysis, such as aspect-based sentiment analysis, grading sentiment analysis (positive, negative, neutral), multilingual sentiment analysis and detection of emotions. === Subjectivity/objectivity identification === This task is commonly defined as classifying a given text (usually a sentence) into one of two classes: objective or subjective. This problem can sometimes be more difficult than polarity classification. The subjectivity of words and phrases may depend on their context and an objective document may contain subjective sentences (e.g., a news article quoting people's opinions). Moreover, as mentioned by Su, results are largely dependent on the definition of subjectivity used when annotating texts. However, Pang showed that removing objective sentences from a document before classifying its polarity helped improve performance. Subjective and objective identification, emerging subtasks of sentiment analysis to use syntactic, semantic features, and machine learning knowledge to identify if a sentence or document contains facts or opinions. Awareness of recognizing factual and opinions is not recent, having possibly first presented by Carbonell at Yale University in 1979. The term objective refers to the incident carrying factual information. Example of an objective sentence: 'To be elected president of the United States, a candidate must be at least thirty-five years of age.' The term subjective describes the incident contains non-factual information in various forms, such as personal opinions, judgment, and predictions, also known as 'private states'. In the example down below, it reflects a private states 'We Americans'. Moreover, the target entity commented by the opinions can take several forms from tangible product to intangible topic matters stated in Liu (2010). Furthermore, three types of attitudes were observed by Liu (2010), 1) positive opinions, 2) neutral opinions, and 3) negative opinions. Example of a subjective sentence: 'We Americans need to elect a president who is mature and who is able to make wise decisions.' This analysis is a classification problem. Each class's collections of words or phrase indicators are defined for to locate desirable patterns on unannotated text. For subjective expression, a different word list has been created. Lists of subjective indicators in words or phrases have been developed by multiple researchers in the linguist and natural language processing field states in Riloff et al. (2003). A dictionary of extraction rules has to be created for measuring given expressions. Over the years, in subjective detection, the features extraction progression from curating features by hand to automated features learning. At the moment, automated learning methods can further separate into supervised and unsupervised machine learning. Patterns extraction with machine learning process annotated and unannotated text have been explored extensively by academic researchers. However, researchers recognized several challenges in developing fixed sets of rules for expressions respectably. Much of the challenges in rule development stems from the nature of textual information. Six challenges have been recognized by several researchers: 1) metaphorical expressions, 2) discrepancies in writings, 3) context-sensitive, 4) represented words with fewer usages, 5) time-sensitive, and 6) ever-growing volume. Metaphorical expressions. The text contains metaphoric expression may impact on the performance on the extraction. Besides, metaphors take in different forms, which may have been contribu

  Read more →
• 

  Equalized odds

  Equalized odds, also referred to as conditional procedure accuracy equality and disparate mistreatment, is a measure of fairness in machine learning. A classifier satisfies this definition if the subjects in the protected and unprotected groups have equal true positive rate and equal false positive rate, satisfying the formula: P ( R = + | Y = y , A = a ) = P ( R = + | Y = y , A = b ) y ∈ { + , − } ∀ a , b ∈ A {\displaystyle P(R=+|Y=y,A=a)=P(R=+|Y=y,A=b)\quad y\in \{+,-\}\quad \forall a,b\in A} For example, A {\displaystyle A} could be gender, race, or any other characteristics that we want to be free of bias, while Y {\displaystyle Y} would be whether the person is qualified for the degree, and the output R {\displaystyle R} would be the school's decision whether to offer the person to study for the degree. In this context, higher university enrollment rates of African Americans compared to whites with similar test scores might be necessary to fulfill the condition of equalized odds, if the "base rate" of Y {\displaystyle Y} differs between the groups. The concept was originally defined for binary-valued Y {\displaystyle Y} . In 2017, Woodworth et al. generalized the concept further for multiple classes.

  Read more →
• 

  Forking lemma

  The forking lemma is any of a number of related lemmas in cryptography research. The lemma states that if an adversary (typically a probabilistic Turing machine), on inputs drawn from some distribution, produces an output that has some property with non-negligible probability, then with non-negligible probability, if the adversary is re-run on new inputs but with the same random tape, its second output will also have the property. This concept was first used by David Pointcheval and Jacques Stern in "Security proofs for signature schemes," published in the proceedings of Eurocrypt 1996. In their paper, the forking lemma is specified in terms of an adversary that attacks a digital signature scheme instantiated in the random oracle model. They show that if an adversary can forge a signature with non-negligible probability, then there is a non-negligible probability that the same adversary with the same random tape can create a second forgery in an attack with a different random oracle. The forking lemma was later generalized by Mihir Bellare and Gregory Neven. The forking lemma has been used and further generalized to prove the security of a variety of digital signature schemes and other random-oracle based cryptographic constructions. == Statement of the lemma == The generalized version of the lemma is stated as follows. Let A be a probabilistic algorithm, with inputs (x, h1, ..., hq; r) that outputs a pair (J, y), where r refers to the random tape of A (that is, the random choices A will make). Suppose further that IG is a probability distribution from which x is drawn, and that H is a set of size h from which each of the hi values are drawn according to the uniform distribution. Let acc be the probability that on inputs distributed as described, the J output by A is greater than or equal to 1. We can then define a "forking algorithm" FA that proceeds as follows, on input x: Pick a random tape r for A. Pick h1, ..., hq uniformly from H. Run A on input (x, h1, ..., hq; r) to produce (J, y). If J = 0, then return (0, 0, 0). Pick h'J, ..., h'q uniformly from H. Run A on input (x, h1, ..., hJ−1, h'J, ..., h'q; r) to produce (J', y'). If J' = J and hJ ≠ h'J then return (1, y, y'), otherwise, return (0, 0, 0). Let frk be the probability that FA outputs a triple starting with 1, given an input x chosen randomly from IG. Then frk ≥ acc ⋅ ( acc q − 1 h ) . {\displaystyle {\text{frk}}\geq {\text{acc}}\cdot \left({\frac {\text{acc}}{q}}-{\frac {1}{h}}\right).} === Intuition === The idea here is to think of A as running two times in related executions, where the process "forks" at a certain point, when some but not all of the input has been examined. In the alternate version, the remaining inputs are re-generated but are generated in the normal way. The point at which the process forks may be something we only want to decide later, possibly based on the behavior of A the first time around: this is why the lemma statement chooses the branching point (J) based on the output of A. The requirement that hJ ≠ h'J is a technical one required by many uses of the lemma. (Note that since both hJ and h'J are chosen randomly from H, then if h is large, as is usually the case, the probability of the two values not being distinct is extremely small.) === Example === For example, let A be an algorithm for breaking a digital signature scheme in the random oracle model. Then x would be the public parameters (including the public key) A is attacking, and hi would be the output of the random oracle on its ith distinct input. The forking lemma is of use when it would be possible, given two different random signatures of the same message, to solve some underlying hard problem. An adversary that forges once, however, gives rise to one that forges twice on the same message with non-negligible probability through the forking lemma. When A attempts to forge on a message m, we consider the output of A to be (J, y) where y is the forgery, and J is such that m was the Jth unique query to the random oracle (it may be assumed that A will query m at some point, if A is to be successful with non-negligible probability). (If A outputs an incorrect forgery, we consider the output to be (0, y).) By the forking lemma, the probability (frk) of obtaining two good forgeries y and y' on the same message but with different random oracle outputs (that is, with hJ ≠ h'J) is non-negligible when acc is also non-negligible. This allows us to prove that if the underlying hard problem is indeed hard, then no adversary can forge signatures. This is the essence of the proof given by Pointcheval and Stern for a modified ElGamal signature scheme against an adaptive adversary. == Known issues with application of forking lemma == The reduction provided by the forking lemma is not tight. Pointcheval and Stern proposed security arguments for Digital Signatures and Blind Signature using Forking Lemma. Claus P. Schnorr provided an attack on blind Schnorr signatures schemes, with more than p o l y l o g ( n ) {\displaystyle polylog(n)} concurrent executions (the case studied and proven secure by Pointcheval and Stern). A polynomial-time attack, for Ω ( n ) {\displaystyle \Omega (n)} concurrent executions, was shown in 2020 by Benhamouda, Lepoint, Raykova, and Orrù. Schnorr also suggested enhancements for securing blind signatures schemes based on discrete logarithm problem.

  Read more →
• 

  Change data capture

  In databases, change data capture (CDC) is a set of software design patterns used to determine and track the data that has changed (the "deltas") so that action can be taken using the changed data. The result is a delta-driven dataset. CDC is an approach to data integration that is based on the identification, capture and delivery of the changes made to enterprise data sources. For instance it can be used for incremental update of data loading. CDC occurs often in data warehouse environments since capturing and preserving the state of data across time is one of the core functions of a data warehouse, but CDC can be utilized in any database or data repository system. == Methodology == System developers can set up CDC mechanisms in a number of ways and in any one or a combination of system layers from application logic down to physical storage. In a simplified CDC context, one computer system has data believed to have changed from a previous point in time, and a second computer system needs to take action based on that changed data. The former is the source, the latter is the target. It is possible that the source and target are the same system physically, but that would not change the design pattern logically. Multiple CDC solutions can exist in a single system. === Timestamps on rows === Tables whose changes must be captured may have a column that represents the time of last change. Names such as LAST_UPDATE, LAST_MODIFIED, etc. are common. Any row in any table that has a timestamp in that column that is more recent than the last time data was captured is considered to have changed. Timestamps on rows are also frequently used for optimistic locking so this column is often available. === Version numbers on rows === Database designers give tables whose changes must be captured a column that contains a version number. Names such as VERSION_NUMBER, etc. are common. One technique is to mark each changed row with a version number. A current version is maintained for the table, or possibly a group of tables. This is stored in a supporting construct such as a reference table. When a change capture occurs, all data with the latest version number is considered to have changed. Once the change capture is complete, the reference table is updated with a new version number. (Do not confuse this technique with row-level versioning used for optimistic locking. For optimistic locking each row has an independent version number, typically a sequential counter. This allows a process to atomically update a row and increment its counter only if another process has not incremented the counter. But CDC cannot use row-level versions to find all changes unless it knows the original "starting" version of every row. This is impractical to maintain.) === Status indicators on rows === This technique can either supplement or complement timestamps and versioning. It can configure an alternative if, for example, a status column is set up on a table row indicating that the row has changed (e.g., a boolean column that, when set to true, indicates that the row has changed). Otherwise, it can act as a complement to the previous methods, indicating that a row, despite having a new version number or a later date, still shouldn't be updated on the target (for example, the data may require human validation). === Time/version/status on rows === This approach combines the three previously discussed methods. As noted, it is not uncommon to see multiple CDC solutions at work in a single system, however, the combination of time, version, and status provides a particularly powerful mechanism and programmers should utilize them as a trio where possible. The three elements are not redundant or superfluous. Using them together allows for such logic as, "Capture all data for version 2.1 that changed between 2005-06-01 00:00 and 2005-07-01 00:00 where the status code indicates it is ready for production." === Triggers on tables === May include a publish/subscribe pattern to communicate the changed data to multiple targets. In this approach, triggers log events that happen to the transactional table into another queue table that can later be "played back". For example, imagine an Accounts table, when transactions are taken against this table, triggers would fire that would then store a history of the event or even the deltas into a separate queue table. The queue table might have schema with the following fields: Id, TableName, RowId, Timestamp, Operation. The data inserted for our Account sample might be: 1, Accounts, 76, 2008-11-02 00:15, Update. More complicated designs might log the actual data that changed. This queue table could then be "played back" to replicate the data from the source system to a target. Data capture offers a challenge in that the structure, contents and use of a transaction log is specific to a database management system. Unlike data access, no standard exists for transaction logs. Most database management systems do not document the internal format of their transaction logs, although some provide programmatic interfaces to their transaction logs (for example: Oracle, DB2, SQL/MP, SQL/MX and SQL Server 2008). Other challenges in using transaction logs for change data capture include: Coordinating the reading of the transaction logs and the archiving of log files (database management software typically archives log files off-line on a regular basis). Translation between physical storage formats that are recorded in the transaction logs and the logical formats typically expected by database users (e.g., some transaction logs save only minimal buffer differences that are not directly useful for change consumers). Dealing with changes to the format of the transaction logs between versions of the database management system. Eliminating uncommitted changes that the database wrote to the transaction log and later rolled back. Dealing with changes to the metadata of tables in the database. CDC solutions based on transaction log files have distinct advantages that include: minimal impact on the database (even more so if one uses log shipping to process the logs on a dedicated host). no need for programmatic changes to the applications that use the database. low latency in acquiring changes. transactional integrity: log scanning can produce a change stream that replays the original transactions in the order they were committed. Such a change stream include changes made to all tables participating in the captured transaction. no need to change the database schema == Confounding factors == As often occurs in complex domains, the final solution to a CDC problem may have to balance many competing concerns. === Unsuitable source systems === Change data capture both increases in complexity and reduces in value if the source system saves metadata changes when the data itself is not modified. For example, some Data models track the user who last looked at but did not change the data in the same structure as the data. This results in noise in the Change Data Capture. === Tracking the capture === Actually tracking the changes depends on the data source. If the data is being persisted in a modern database then Change Data Capture is a simple matter of permissions. Two techniques are in common use: Tracking changes using database triggers Reading the transaction log as, or shortly after, it is written. If the data is not in a modern database, CDC becomes a programming challenge. === Push versus pull === Push: the source process creates a snapshot of changes within its own process and delivers rows downstream. The downstream process uses the snapshot, creates its own subset and delivers them to the next process. Pull: the target that is immediately downstream from the source, prepares a request for data from the source. The downstream target delivers the snapshot to the next target, as in the push model. === Alternatives === Sometimes the slowly changing dimension is used as an alternative method. CDC and SCD are similar in that both methods can detect changes in a data set. The most common forms of SCD are type 1 (overwrite), type 2 (maintain history) or 3 (only previous and current value). SCD 2 can be useful if history is needed in the target system. CDC overwrites in the target system (akin to SCD1), and is ideal when only the changed data needs to arrive at the target, i.e. a delta-driven dataset.

  Read more →
• 

  Professional network service

  A professional network service (or, in an Internet context, simply a professional network) is a type of social network service that focuses on interactions and relationships for business opportunities and career growth, with less emphasis on activities in personal life. A professional network service is used by working individuals, job-seekers, and businesses to establish and maintain professional contacts, to find work or hire employees, share professional achievements, sell or promote services, and stay up-to-date with industry news and trends. According to LinkedIn managing director Clifford Rosenberg in an interview with AAP in 2010, "[t]his is a call to action for professionals to re-address their use of social networks and begin to reap as many rewards from networking professionally as they do personally." Businesses mostly depend on resources and information outside the company and to get what they need, they need to reach out and professionally network with others, such as employees or clients as well as potential opportunities. "Nardi, Whittaker, and Schwarz (2002) point out three main tasks that they believe networkers need to attend to keep a successful professional (intentional) network: building a network, maintaining the network, and activating selected contacts. They stress that networkers need to continue to add new contacts to their network to access as many resources as possible and to maintain their network by staying in touch with their contacts. This is so that the contacts are easy to activate when the networker has work that needs to be done." By using a professional network service, businesses can keep all of their networks up-to-date, and in order, and helps figure out the best way to efficiently get in touch with each of them. A service that can do all that helps relieve some of the stress when trying to get things done. Not all professional network services are online sites that help promote a business. Some services connect the user to other services that help promote the business other than online sites, such as phone/Internet companies that provide services and companies that specifically are designed to do all of the promoting, online and in person, for a business. == History == In 1997, professional network services started up throughout the world and continue to grow. The first recognizable site to combine all features, such as creating profiles, adding friends, and searching for friends, was SixDegrees.com. According to Boyd and Ellison's article, "Social Network Sites: Definition, History, and Scholarship", from 1997 to 2001, several community tools began supporting various combinations of profiles and publicly articulated Friends. Boyd and Ellison go on to say that the next wave began with Ryze.com in 2001. It was introduced as a new way "to help people leverage their business networks". == Inside the works == Quite a lot of work is put into a professional network service, such as the number of hours that go into them and the type of people they work for, as well as the business model of it all, such as the professional interaction and the multiple services they deal with. === Types of services === Some professional network services not only help promote the business but can also help in connecting to other people. Those services may include a specific phone and/or Internet company or a company that helps to connect with other businesses. According to the Society for New Communications Research (SNCR), there are at least nine online professional networks that are being used. === Professional interaction === Kaplan and Haenlein elaborate on five key considerations for companies when utilizing media. These include the importance of careful selection, the option to choose existing applications or develop custom ones, ensuring alignment with organizational activities, integrating a comprehensive media plan, and providing accessibility to all stakeholders. ==== Choose carefully ==== "Choosing the right medium for any given purpose depends on the target group to be reached and the message to be communicated. On one hand, each Social Media application usually attracts a certain group of people, and firms should be active wherever their customers are present. On the other hand, there may be situations whereby certain features are necessary to ensure effective communication, and these features are only offered by one specific application." ==== Ensure activity alignment ==== "Sometimes you may decide to rely on various Social Media, or a set of different applications within the same group, to have the largest possible reach." "Using different contact channels can be a worthwhile and profitable strategy." According to the Society for New Communications Research at Harvard University, "the average professional belongs to 3–5 online networks for business use, and LinkedIn, Facebook, and Twitter are among the top used." ==== Integrate a media plan ==== Social media and traditional media are "both part of the same: your corporate image" in the customers' eyes. ==== Allow access to all ==== "...once the firm has decided to utilize Social Media applications, it is worth checking that all employees may access them." According to the SNCR, "the convergence of Internet, mobile, and social media has taken significant shape as professionals rely on anywhere access to information, relationships, and networks." ==== Online usage ==== "Half of the respondents report participating in 3 to 5 online professional networks. Another three in ten participate in 6 or more professional networks." "Popular social networks are now being used frequently as Professional Communities. More than nine in ten respondents indicated that they use LinkedIn and half reported using Facebook. Twitter and blogs were frequently listed as 'professional networks'." === Business model === According to Michael Rappa's article, Business models on the Web", "a business model is the method of doing business by which a company can sustain itself – that is, generate revenue. The business model spells out how a company makes money by specifying where it is positioned in the value chain." Rappa mentions that there are at least nine basic categories from which a business model can be separated. Those categories are a brokerage, advertising, infomediary, merchant, manufacturer, affiliate, community, subscription, and utility. "...a firm may combine several different models as part of its overall Internet business strategy." At first, Flickr started as a way to mainstream public relations. == Social impact == When it comes to the social impact that professional network services have on today's society, it has proved to increase activity. According to the SNCR, "[t]hree quarters of respondents rely on professional networks to support business decisions. Reliance has increased for essentially all respondents over the past three years. Younger (20–35) and older professionals (55+) are more active users of social tools than middle-aged professionals. More people are collaborating outside their company wall than within their organizational intranet." == Limitations == Since the internet and social media are a part of this "world where consumers can speak so freely with each other and businesses have increasingly less control over the information available about them in cyberspace", most firms and businesses are uncomfortable with all the freedom. According to Kaplan and Haenlein's article, "Users of the world, unite! The challenges and opportunities of Social Media", businesses are pushed aside and are only able to sit back and watch as their customers publicly post comments, which may or may not be well-written.

  Read more →
• 

  DeepSeek (chatbot)

  DeepSeek is a generative artificial intelligence chatbot developed by the Chinese company DeepSeek. Released on 20 January 2025, DeepSeek-R1 surpassed ChatGPT as the most downloaded freeware app on the iOS App Store in the United States by 27 January. DeepSeek's success against larger and more established rivals has been described as "upending AI" and initiating "a global AI space race". DeepSeek's compliance with Chinese government censorship policies and its data collection practices have also raised concerns over privacy and information control in the model, prompting regulatory scrutiny in multiple countries. However, it has also been praised for its open weights and infrastructure code, energy efficiency and contributions to open-source artificial intelligence. == History == On 10 January 2025, DeepSeek released the chatbot, based on the DeepSeek-R1 model, for iOS and Android. By 27 January, DeepSeek-R1 surpassed ChatGPT as the most-downloaded freeware app on the iOS App Store in the United States, which resulted in an 18% drop in Nvidia's share price. And after a "large-scale" cyberattack on the same day disrupted the proper functioning of its servers, DeepSeek had limited its new user registration to phone numbers from mainland China, email addresses, or Google account logins. On 3 April 2025, in collaboration with researchers at Tsinghua University, DeepSeek published a paper unveiling a new model that combines the techniques generative reward modeling (GRM) and self-principled critique tuning (SPCT). The resulting model is referred to as DeepSeek-GRM. The goal of using these techniques is to foster more effective inference-time scaling within their LLM and chatbot services. Notably, DeepSeek has said that these new models will be released and made open source. On 30 April 2025, Deepseek released its math-focused Artificial Intelligence Model named "DeepSeek-Prover-V2-671B". This model is useful for formal theorem proving and mathematical reasoning. On 24 April 2026, DeepSeek released DeepSeek V4 and V4-Pro. == Usage == DeepSeek can answer questions, solve logic problems, and write computer programs on par with other chatbots, according to benchmark tests used by American AI companies. Users can access the chatbot for free through the official DeepSeek website or mobile application, without limitation on the number of queries. DeepSeek only supports user-signup via a global email service, e.g. Gmail, Google or Yahoo. DeepSeek also offers access to the R1 and V3 models that power the chatbot via an API with a usage-based pricing model. This modality is primarily targeted towards developers and businesses. As of February 2025, API usage is priced at approximately $0.28 per million input tokens and $0.42 per million output tokens, making it less expensive than some competing services. Its web version is completely free, with 500 messages per hour cap limit to prevent bots from spamming. == Operation == DeepSeek-V3 uses significantly fewer resources compared to its peers. For example, whereas the world's leading AI companies train their chatbots with supercomputers using as many as 16,000 graphics processing units (GPUs), DeepSeek claims to have needed only about 2,000 GPUs—namely, the H800 series chips from Nvidia. It was trained in around 55 days at a cost of US$5.58 million, which is roughly one-tenth of what tech giant Meta spent building its latest AI technology. == Reactions == DeepSeek's success against larger and more established rivals has been described as "upending AI", constituting "the first shot at what is emerging as a global AI space race", and ushering in "a new era of AI brinkmanship". === Challenge to US AI dominance === DeepSeek's competitive performance at relatively minimal cost has been recognized as potentially challenging the global dominance of American AI models. Various publications and news media, such as The Hill and The Guardian, have described the release of the R1 chatbot as a "Sputnik moment" for American AI, echoing Marc Andreessen's view. OpenAI wrote a letter to the Office of Science and Technology Policy (OSTP), in March 2025, citing issues concerning a possibility that Deepseek could manipulate responses to cause harm. === Chinese perspective === DeepSeek's founder Liang Wenfeng has been compared to OpenAI CEO Sam Altman, with CNN calling him the Sam Altman of China and an evangelist for AI. Chinese state media widely praised DeepSeek as a national asset. On 20 January 2025, Chinese Premier Li Qiang invited Wenfeng to his symposium with experts and asked him to provide opinions and suggestions on a draft for comments of the annual 2024 government work report. On 20 February 2025, Wenfeng met with General Secretary of the Chinese Communist Party Xi Jinping, who encouraged party and state leaders to experiment with DeepSeek. Government officials responded to Xi's approval of the chatbot by reportedly using it to draft legal judgements, propose medical treatment plans, and analyze surveillance videos to search for missing persons. === Performance and success === Leading figures in the American AI sector had mixed reactions to DeepSeek's performance and success. Microsoft CEO Satya Nadella and OpenAI CEO Altman—whose companies are involved in the United States government-backed "Stargate Project" to develop American AI infrastructure—both called DeepSeek "super impressive". Various companies including Amazon Web Services, Toyota, and Stripe are seeking to use the model in their program. When American President Donald Trump announced The Stargate Project, he referred to DeepSeek as a wake-up call and a positive development. Other leaders in the AI field, however—including Scale AI CEO Alexandr Wang, Anthropic cofounder and CEO Dario Amodei, and Elon Musk—have expressed skepticism of the app's performance or of the sustainability of its success. Wang in particularly referred to DeepSeek-V3 as "earth-shattering" and DeepSeek-R1 as "top performing, or roughly on par with the best American models", but speculated that China may possess more AI-powering Nvidia H100 GPUs than thought. === Stock market implications === DeepSeek's optimization of limited resources has highlighted potential limits of United States sanctions on China's AI development, including export restrictions on advanced AI chips to China. The success of the company's AI models consequently "sparked market turmoil" and caused shares in major global technology companies to plunge on 27 January 2025: Nvidia's stock fell by as much as 17–18%, as did the stock of rival Broadcom. Other tech firms also sank, including Microsoft (down 2.5%), Google's owner Alphabet (down over 4%), and Dutch chip equipment maker ASML (down over 7%). A global sell-off of technology stocks on Nasdaq, prompted by the release of the R1 model, led to record losses of about $593 billion in the market capitalizations of AI and computer hardware companies; and by the next day a total of $1 trillion of value was wiped from American stocks. == Concerns == === Distillation === DeepSeek has been reported to sometimes claim that it is ChatGPT. OpenAI said that DeepSeek may have "inappropriately" used outputs from its model as training data in a process called distillation. However, there is currently no method to prove this conclusively. === Censorship === DeepSeek's compliance with Chinese government censorship policies and its data collection practices have raised concerns over information control in the model, prompting regulatory scrutiny in multiple countries. Reports indicate that it applies content moderation in accordance with the government's "public opinion guidance" regulations, limiting responses on topics such as the Tiananmen Square massacre and Taiwan's political status. DeepSeek models that have been uncensored also display a bias towards Chinese government viewpoints on controversial topics such as Xi Jinping's human rights record and Taiwan's political status. However, users who have downloaded the models and hosted them on their own devices and servers have reported successfully removing this censorship. Some sources have observed that the official application programming interface (API) version of R1, which runs from servers located in mainland China, uses censorship mechanisms for topics considered politically sensitive for the government of China. For example, the model may initially generate answers to questions about the 1989 Tiananmen Square massacre, persecution of Uyghurs, comparisons between Xi Jinping and Winnie the Pooh, and human rights in China, but a censorship mechanism deletes the uncensored response afterwards and replaces it with a message such as:"Sorry, that's beyond my current scope. Let's talk about something else." The post hoc censorship mechanisms and restrictions added on top of the model's output can be removed in the open-source version of the R1 model. If the "core Socialist values" defined by the Chinese Internet regul

  Read more →
• 

  Communications security

  Communications security is the discipline of preventing unauthorized interceptors from accessing telecommunications in an intelligible form, while still delivering content to the intended recipients. In the North Atlantic Treaty Organization culture, including United States Department of Defense culture, it is often referred to by the abbreviation COMSEC. The field includes cryptographic security, transmission security, emissions security and physical security of COMSEC equipment and associated keying material. COMSEC is used to protect both classified and unclassified traffic on military communications networks, including voice, video, and data. It is used for both analog and digital applications, and both wired and wireless links. Voice over secure internet protocol VOSIP has become the de facto standard for securing voice communication, replacing the need for Secure Terminal Equipment (STE) in much of NATO, including the U.S.A. USCENTCOM moved entirely to VOSIP in 2008. == Specialties == Cryptographic security: The component of communications security that results from the provision of technically sound cryptosystems and their proper use. This includes ensuring message confidentiality and authenticity. Emission security (EMSEC): The protection resulting from all measures taken to deny unauthorized persons information of value that might be derived from communications systems and cryptographic equipment intercepts and the interception and analysis of compromising emanations from cryptographic equipment, information systems, and telecommunications systems. Transmission security (TRANSEC): The component of communications security that results from the application of measures designed to protect transmissions from interception and exploitation by means other than cryptanalysis (e.g. frequency hopping and spread spectrum). Physical security: The component of communications security that results from all physical measures necessary to safeguard classified equipment, material, and documents from access thereto or observation thereof by unauthorized persons. == Related terms == ACES – Automated Communications Engineering Software AEK – Algorithmic Encryption Key AKMS – the Army Key Management System CCI – Controlled Cryptographic Item - equipment which contains COMSEC embedded devices CT3 – Common Tier 3 DTD – Data Transfer Device ICOM – Integrated COMSEC, e.g. a radio with built in encryption KEK – Key Encryption Key KG-30 – family of COMSEC equipment KOI-18 – Tape Reader General Purpose KPK – Key production key KYK-13 – Electronic Transfer Device KYX-15 – Electronic Transfer Device LCMS – Local COMSEC Management Software OTAR – Over the Air Rekeying OWK – Over the Wire Key SKL – Simple Key Loader SOI – Signal operating instructions STE – Secure Terminal Equipment (secure phone) STU-III – (obsolete secure phone, replaced by STE) TED – Trunk Encryption Device such as the WALBURN/KG family TEK – Traffic Encryption Key TPI – Two person integrity TSEC – Telecommunications Security (sometimes referred to in error transmission security or TRANSEC) Types of COMSEC equipment: Authentication equipment Crypto equipment: Any equipment that embodies cryptographic logic or performs one or more cryptographic functions (key generation, encryption, and authentication). Crypto-ancillary equipment: Equipment designed specifically to facilitate efficient or reliable operation of crypto-equipment, without performing cryptographic functions itself. Crypto-production equipment: Equipment used to produce or load keying material == DoD Electronic Key Management System == The Electronic Key Management System (EKMS) is a United States Department of Defense (DoD) key management, COMSEC material distribution, and logistics support system. The National Security Agency (NSA) established the EKMS program to supply electronic key to COMSEC devices in securely and timely manner, and to provide COMSEC managers with an automated system capable of ordering, generation, production, distribution, storage, security accounting, and access control. The Army's platform in the four-tiered EKMS, AKMS, automates frequency management and COMSEC management operations. It eliminates paper keying material, hardcopy Signal operating instructions (SOI) and saves the time and resources required for courier distribution. It has 4 components: LCMS provides automation for the detailed accounting required for every COMSEC account, and electronic key generation and distribution capability. ACES is the frequency management portion of AKMS. ACES has been designated by the Military Communications Electronics Board as the joint standard for use by all services in development of frequency management and crypto-net planning. CT3 with DTD software is in a fielded, ruggedized hand-held device that handles, views, stores, and loads SOI, Key, and electronic protection data. DTD provides an improved net-control device to automate crypto-net control operations for communications networks employing electronically keyed COMSEC equipment. SKL is a hand-held PDA that handles, views, stores, and loads SOI, Key, and electronic protection data. == Key Management Infrastructure (KMI) Program == KMI is intended to replace the legacy Electronic Key Management System to provide a means for securely ordering, generating, producing, distributing, managing, and auditing cryptographic products (e.g., asymmetric keys, symmetric keys, manual cryptographic systems, and cryptographic applications). This system is currently being fielded by Major Commands and variants will be required for non-DoD Agencies with a COMSEC Mission.

  Read more →
• 

  What I eat in a day video

  "What I eat in a day" videos are a trend on several social media platforms where a person describes all the meals and snacks that they eat during a given day, often as part of a given diet. The videos, shared on platforms including Twitter, TikTok and YouTube, become increasingly popular in 2020, with some of them accumulating millions of views, and they are considered a profitable industry for the people making them. Some have raised concerns that the videos may promote an unrealistic standard for healthy eating and contribute to the development of eating disorders. == Format == These videos often feature a montage of the food that the creator eats over the course of the day, sometimes with the associated calorie count of the foods that they describe. Unlike related mukbang videos, however, in which participants eat large amounts of food, the diets described are often restrictive. However, other videos are labeled as "unhealthy" and depict large portion sizes and higher amounts of processed food. == Popularity == "What I eat in a day" videos have existed for a long time, especially on YouTube, but they have become much more widespread in recent years. This phenomenon is self-reinforcing because when social media users watch or like these videos they are likely to see more of them in the future. Indeed, some of the most successful videos have tens of millions of view each. == Criticism and controversy == Several dieticians and mental health professionals over the impacts that these videos can have, as they can advocate a restrictive style of eating and not "promote body diversity." They have also raised concerns that this trend could contribute to a rise in disordered eating, especially since use of social media is known to increase feelings of negative body image. This trend is particularly prevalent among young adults, which are also the group with the highest vulnerability to eating disorders. More recently, a portion of these videos have begun to challenge diets and depict more realistic ways of eating in order to reduce the potential consequences of the trend.

  Read more →