AI Headshot Business

AI Headshot Business — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

• 

  Image destriping

  Image destriping is the process of removing stripes or streaks from images and videos without disrupting the original image/video. These artifacts plague a range of fields in scientific imaging including atomic force microscopy, light sheet fluorescence microscopy, and planetary satellite imaging. The most common image processing techniques to reduce stripe artifacts is with Fourier filtering. Unfortunately, filtering methods risk altering or suppressing useful image data. Methods developed for multiple-sensor imaging systems in planetary satellites use statistical-based methods to match signal distribution across multiple sensors. More recently, a new class of approaches leverage compressed sensing, to regularize an optimization problem, and recover stripe free images. In many cases, these destriped images have little to no artifacts, even at low signal to noise ratios.

  Read more →
• 

  Image registration

  Image registration is the process of transforming different sets of data into one coordinate system. Data may be multiple photographs, data from different sensors, times, depths, or viewpoints. It is used in computer vision, medical imaging, military automatic target recognition, and compiling and analyzing images and data from satellites. Registration is necessary in order to be able to compare or integrate the data obtained from these different measurements. == Algorithm classification == === Intensity-based vs feature-based === Image registration or image alignment algorithms can be classified into intensity-based and feature-based. One of the images is referred to as the target, fixed or sensed image and the others are referred to as the moving or source images. Image registration involves spatially transforming the source/moving image(s) to align with the target image. The reference frame in the target image is stationary, while the other datasets are transformed to match to the target. Intensity-based methods compare intensity patterns in images via correlation metrics, while feature-based methods find correspondence between image features such as points, lines, and contours. Intensity-based methods register entire images or sub-images. If sub-images are registered, centers of corresponding sub images are treated as corresponding feature points. Feature-based methods establish a correspondence between a number of especially distinct points in images. Knowing the correspondence between a number of points in images, a geometrical transformation is then determined to map the target image to the reference images, thereby establishing point-by-point correspondence between the reference and target images. Methods combining intensity-based and feature-based information have also been developed. === Transformation models === Image registration algorithms can also be classified according to the transformation models they use to relate the target image space to the reference image space. The first broad category of transformation models includes affine transformations, which include rotation, scaling, translation and shearing. Affine transformations are global in nature, thus, they cannot model local geometric differences between images. The second category of transformations allow 'elastic' or 'nonrigid' transformations. These transformations are capable of locally warping the target image to align with the reference image. Nonrigid transformations include radial basis functions (thin-plate or surface splines, multiquadrics, and compactly-supported transformations), physical continuum models (viscous fluids), and large deformation models (diffeomorphisms). Transformations are commonly described by a parametrization, where the model dictates the number of parameters. For instance, the translation of a full image can be described by a translation vector parameter. These models are called parametric models. Non-parametric models on the other hand, do not follow any parameterization, allowing each image element to be displaced arbitrarily. There are a number of programs that implement both estimation and application of a warp-field. It is a part of the SPM and AIR programs. === Transformations of coordinates via the law of function composition rather than addition === Alternatively, many advanced methods for spatial normalization are building on structure preserving transformations homeomorphisms and diffeomorphisms since they carry smooth submanifolds smoothly during transformation. Diffeomorphisms are generated in the modern field of Computational Anatomy based on flows since diffeomorphisms are not additive although they form a group, but a group under the law of function composition. For this reason, flows which generalize the ideas of additive groups allow for generating large deformations that preserve topology, providing 1-1 and onto transformations. Computational methods for generating such transformation are often called LDDMM which provide flows of diffeomorphisms as the main computational tool for connecting coordinate systems corresponding to the geodesic flows of Computational Anatomy. There are a number of programs which generate diffeomorphic transformations of coordinates via diffeomorphic mapping including MRI Studio and MRI Cloud.org === Spatial vs frequency domain methods === Spatial methods operate in the image domain, matching intensity patterns or features in images. Some of the feature matching algorithms are outgrowths of traditional techniques for performing manual image registration, in which an operator chooses corresponding control points (CP) in images. When the number of control points exceeds the minimum required to define the appropriate transformation model, iterative algorithms like RANSAC can be used to robustly estimate the parameters of a particular transformation type (e.g. affine) for registration of the images. Frequency-domain methods find the transformation parameters for registration of the images while working in the transform domain. Such methods work for simple transformations, such as translation, rotation, and scaling. Applying the phase correlation method to a pair of images produces a third image which contains a single peak. The location of this peak corresponds to the relative translation between the images. Unlike many spatial-domain algorithms, the phase correlation method is resilient to noise, occlusions, and other defects typical of medical or satellite images. Additionally, the phase correlation uses the fast Fourier transform to compute the cross-correlation between the two images, generally resulting in large performance gains. The method can be extended to determine rotation and scaling differences between two images by first converting the images to log-polar coordinates. Due to properties of the Fourier transform, the rotation and scaling parameters can be determined in a manner invariant to translation. === Single- vs multi-modality methods === Another classification can be made between single-modality and multi-modality methods. Single-modality methods tend to register images in the same modality acquired by the same scanner/sensor type, while multi-modality registration methods tended to register images acquired by different scanner/sensor types. Multi-modality registration methods are often used in medical imaging as images of a subject are frequently obtained from different scanners. Examples include registration of brain CT/MRI images or whole body PET/CT images for tumor localization, registration of contrast-enhanced CT images against non-contrast-enhanced CT images for segmentation of specific parts of the anatomy, and registration of ultrasound and CT images for prostate localization in radiotherapy. === Automatic vs interactive methods === Registration methods may be classified based on the level of automation they provide. Manual, interactive, semi-automatic, and automatic methods have been developed. Manual methods provide tools to align the images manually. Interactive methods reduce user bias by performing certain key operations automatically while still relying on the user to guide the registration. Semi-automatic methods perform more of the registration steps automatically but depend on the user to verify the correctness of a registration. Automatic methods do not allow any user interaction and perform all registration steps automatically. === Similarity measures for image registration === Image similarities are broadly used in medical imaging. An image similarity measure quantifies the degree of similarity between intensity patterns in two images. The choice of an image similarity measure depends on the modality of the images to be registered. Common examples of image similarity measures include cross-correlation, mutual information, sum of squared intensity differences, and ratio image uniformity. Mutual information and normalized mutual information are the most popular image similarity measures for registration of multimodality images. Cross-correlation, sum of squared intensity differences and ratio image uniformity are commonly used for registration of images in the same modality. Many new features have been derived for cost functions based on matching methods via large deformations have emerged in the field Computational Anatomy including Measure matching which are pointsets or landmarks without correspondence, Curve matching and Surface matching via mathematical currents and varifolds. == Uncertainty == There is a level of uncertainty associated with registering images that have any spatio-temporal differences. A confident registration with a measure of uncertainty is critical for many change detection applications such as medical diagnostics. In remote sensing applications where a digital image pixel may represent several kilometers of spatial distance (such as NASA's LANDSAT imagery), an uncertain image registration can mean that a solution could b

  Read more →
• 

  Contract management software

  Contract management software constitutes software and associated data management used to support contract management, contract lifecycle management, and contractor management on projects in the procurement of goods and services. It may be used together with project management software. == History == Historically, contract management was seen as a "paper-intensive" process. Early steps from the early 2000's reported by the Aberdeen Group required extensive data conversion work to enable documents to be handled electronically. With the adoption of the European Union's General Data Protection Regulation (GDPR) in 2016, companies needed to take additional steps in regards to contract management. Each data responsible entity was obliged to sign data processing agreements (DPAs) with the various vendors, who treat personal data on behalf of the data responsible. DPAs need to be regularly controlled, adjusted and renewed, which adds an extra agreement to such vendors or at least an extra DPA addendum to each agreement. By 2018, Ardent Partner's research had found that software used for automating contract management activities was being more extensively used among major companies or businesses with "Best-in-Class" procurement teams. Contract management process automation was found to be closely linked with more effective internal business collaboration, standardization and risk management. == Advantages and key functions == Using contract management software can have multiple benefits compared to manually managing paper contracts. This software can help keep track of multiple activities and can have features for automating administration, ensuring compliance, monitoring risk, running reports and triggering alerts. In addition to these types of features, contract management software systems provide a centralized repository for employees to quickly access all contracts worldwide in one place. Contract management software is produced by many companies, working on a range of scales and offering varying degrees of customizability. Basic functions should include the ability to store contract documents, track changes to contract documents, search documents for a particular criterion, send key date alerts and to report required aspects of the contract. Other functions include managing a new contract request, capturing related data, following a document through a review and approval process, and collecting digital signatures. Contract management software may also be an aid to project portfolio management and spend analysis, and may also monitor KPIs. Leading contract management software provides contract visibility, monitoring, and compliance to automate and streamline the contract lifecycle process. Contract management software which uses artificial intelligence (AI) can identify contract types based on pattern recognition. AI contracting software trains its algorithms on a set of contract data to recognize patterns and extract variables such as clauses, dates, and parties. It also offers simple prediction capabilities, by sorting through a large volume of contracts and flagging individual contracts based on specified criteria. AI software can also read contracts in multiple formats and languages, extract contract data, and provide analytics. It can reduce the risk of human error in contract drafting and review. A centralized repository provides a critical advantage allowing for all contract documents to be stored within one location. Having contracts stored in multiple locations can delay and interrupt the contracting process. == Contract risk management software (CRMS) for capital projects == Very large enterprises, such as capital expenditure (capex) projects, involve multiple parties and high risk and uncertainty. They are unlike traditional operating contracts in that they are subject to shared deadlines in unique situations. As the complexity of these unique projects increases, the relationships between parties become more important. This requires contract management software, or contract risk management software (CRMS), to become more dynamic and responsive. The terms of these capex contracts necessarily involve assumptions at the start of the process and are likely to change over the lifetime of the project lifecycle. For this reason, CRMS must be capable of recording one single instance of agreed changes to contract terms and incorporating these changes in an auditable and legally robust way. With multiple decision makers involved, CRMS should also make accountability more transparent and enable faster decisions about variation proposals.

  Read more →
• 

  Residual neural network

  A residual neural network (also referred to as a residual network or ResNet) is a deep learning architecture in which the layers learn residual functions with reference to the layer inputs. It was developed in 2015 for image recognition, and won the ImageNet Large Scale Visual Recognition Challenge (ILSVRC) of that year. As a point of terminology, "residual connection" refers to the specific architectural motif of x ↦ f ( x ) + x {\displaystyle x\mapsto f(x)+x} , where f {\displaystyle f} is an arbitrary neural network module. The motif had been used previously (see §History for details). However, the publication of ResNet made it widely popular for feedforward networks, appearing in neural networks that are seemingly unrelated to ResNet. The residual connection stabilizes the training and convergence of deep neural networks with hundreds of layers, and is a common motif in deep neural networks, such as transformer models (e.g., BERT, and GPT models such as ChatGPT), the AlphaGo Zero system, the AlphaStar system, and the AlphaFold system. == Mathematics == === Residual connection === In a multilayer neural network model, consider a (non-residual) subnetwork with a certain number of stacked layers (e.g., 2 or 3). Let H ( x ; α ) {\displaystyle H(x;\alpha )} denote the subnetwork. Suppose H ∗ {\displaystyle H^{}} is the desired optimal output of this subnetwork. Residual learning simply adds x {\displaystyle x} directly to the output, such that the optimal learned output now becomes be H ∗ − x {\displaystyle H^{}-x} , which is interpreted as a "residual" with respect to x {\displaystyle x} . The operation of "adding x {\displaystyle x} " is implemented via a "skip connection" that performs an identity mapping to connect the input of the subnetwork with its output. This connection is referred to as a "residual connection" in later work. Let F ( x ; α ) = H ( x ; a ) + x {\displaystyle F(x;\alpha )=H(x;a)+x} . The function F {\displaystyle F} is often represented by matrix multiplication interlaced with activation functions and normalization operations (e.g., batch normalization or layer normalization). As a whole, one of these subnetworks is referred to as a "residual block". A deep residual network is constructed by simply stacking these blocks. Long short-term memory (LSTM) has a memory mechanism that serves as a residual connection. In an LSTM without a forget gate, an input x t {\displaystyle x_{t}} is processed by a function F {\displaystyle F} and added to a memory cell c t {\displaystyle c_{t}} , resulting in c t + 1 = c t + F ( x t ) {\displaystyle c_{t+1}=c_{t}+F(x_{t})} . An LSTM with a forget gate essentially functions as a highway network. To stabilize the variance of the layers' inputs, it is recommended to replace the residual connections x + f ( x ) {\displaystyle x+f(x)} with x / L + f ( x ) {\displaystyle x/L+f(x)} , where L {\displaystyle L} is the total number of residual layers. === Projection connection === If the function F {\displaystyle F} is of type F : R n → R m {\displaystyle F:\mathbb {R} ^{n}\to \mathbb {R} ^{m}} where n ≠ m {\displaystyle n\neq m} , then F ( x ) + x {\displaystyle F(x)+x} is undefined. To handle this special case, a projection connection is used: y = F ( x ) + P ( x ) {\displaystyle y=F(x)+P(x)} where P {\displaystyle P} is typically a linear projection, defined by P ( x ) = M x {\displaystyle P(x)=Mx} where M {\displaystyle M} is a m × n {\displaystyle m\times n} matrix. The matrix is trained via backpropagation, as is any other parameter of the model. === Signal propagation === The introduction of identity mappings facilitates signal propagation in both forward and backward paths. ==== Forward propagation ==== If the output of the ℓ {\displaystyle \ell } -th residual block is the input to the ( ℓ + 1 ) {\displaystyle (\ell +1)} -th residual block (assuming no activation function between blocks), then the ( ℓ + 1 ) {\displaystyle (\ell +1)} -th input is: x ℓ + 1 = F ( x ℓ ) + x ℓ {\displaystyle x_{\ell +1}=F(x_{\ell })+x_{\ell }} Applying this formulation recursively, e.g.: x ℓ + 2 = F ( x ℓ + 1 ) + x ℓ + 1 = F ( x ℓ + 1 ) + F ( x ℓ ) + x ℓ {\displaystyle {\begin{aligned}x_{\ell +2}&=F(x_{\ell +1})+x_{\ell +1}\\&=F(x_{\ell +1})+F(x_{\ell })+x_{\ell }\end{aligned}}} yields the general relationship: x L = x ℓ + ∑ i = ℓ L − 1 F ( x i ) {\displaystyle x_{L}=x_{\ell }+\sum _{i=\ell }^{L-1}F(x_{i})} where L {\textstyle L} is the index of a residual block and ℓ {\textstyle \ell } is the index of some earlier block. This formulation suggests that there is always a signal that is directly sent from a shallower block ℓ {\textstyle \ell } to a deeper block L {\textstyle L} . ==== Backward propagation ==== The residual learning formulation provides the added benefit of mitigating the vanishing gradient problem to some extent. However, it is crucial to acknowledge that the vanishing gradient issue is not the root cause of the degradation problem, which is tackled through the use of normalization. To observe the effect of residual blocks on backpropagation, consider the partial derivative of a loss function E {\displaystyle {\mathcal {E}}} with respect to some residual block input x ℓ {\displaystyle x_{\ell }} . Using the equation above from forward propagation for a later residual block L > ℓ {\displaystyle L>\ell } : ∂ E ∂ x ℓ = ∂ E ∂ x L ∂ x L ∂ x ℓ = ∂ E ∂ x L ( 1 + ∂ ∂ x ℓ ∑ i = ℓ L − 1 F ( x i ) ) = ∂ E ∂ x L + ∂ E ∂ x L ∂ ∂ x ℓ ∑ i = ℓ L − 1 F ( x i ) {\displaystyle {\begin{aligned}{\frac {\partial {\mathcal {E}}}{\partial x_{\ell }}}&={\frac {\partial {\mathcal {E}}}{\partial x_{L}}}{\frac {\partial x_{L}}{\partial x_{\ell }}}\\&={\frac {\partial {\mathcal {E}}}{\partial x_{L}}}\left(1+{\frac {\partial }{\partial x_{\ell }}}\sum _{i=\ell }^{L-1}F(x_{i})\right)\\&={\frac {\partial {\mathcal {E}}}{\partial x_{L}}}+{\frac {\partial {\mathcal {E}}}{\partial x_{L}}}{\frac {\partial }{\partial x_{\ell }}}\sum _{i=\ell }^{L-1}F(x_{i})\end{aligned}}} This formulation suggests that the gradient computation of a shallower layer, ∂ E ∂ x ℓ {\textstyle {\frac {\partial {\mathcal {E}}}{\partial x_{\ell }}}} , always has a later term ∂ E ∂ x L {\textstyle {\frac {\partial {\mathcal {E}}}{\partial x_{L}}}} that is directly added. Even if the gradients of the F ( x i ) {\displaystyle F(x_{i})} terms are small, the total gradient ∂ E ∂ x ℓ {\textstyle {\frac {\partial {\mathcal {E}}}{\partial x_{\ell }}}} resists vanishing due to the added term ∂ E ∂ x L {\textstyle {\frac {\partial {\mathcal {E}}}{\partial x_{L}}}} . == Variants of residual blocks == === Basic block === A basic block is the simplest building block studied in the original ResNet. This block consists of two sequential 3x3 convolutional layers and a residual connection. The input and output dimensions of both layers are equal. === Bottleneck block === A bottleneck block consists of three sequential convolutional layers and a residual connection. The first layer in this block is a 1×1 convolution for dimension reduction (e.g., to 1/2 of the input dimension); the second layer performs a 3×3 convolution; the last layer is another 1×1 convolution for dimension restoration. The models of ResNet-50, ResNet-101, and ResNet-152 are all based on bottleneck blocks. === Pre-activation block === The pre-activation residual block applies activation functions before applying the residual function F {\displaystyle F} . Formally, the computation of a pre-activation residual block can be written as: x ℓ + 1 = F ( ϕ ( x ℓ ) ) + x ℓ {\displaystyle x_{\ell +1}=F(\phi (x_{\ell }))+x_{\ell }} where ϕ {\displaystyle \phi } can be any activation (e.g. ReLU) or normalization (e.g. LayerNorm) operation. This design reduces the number of non-identity mappings between residual blocks, and allows an identity mapping directly from the input to the output. This design was used to train models with 200 to over 1000 layers, and was found to consistently outperform variants where the residual path is not an identity function. The pre-activation ResNet with 200 layers took 3 weeks to train for ImageNet on 8 GPUs in 2016. Since GPT-2, transformer blocks have been mostly implemented as pre-activation blocks. This is often referred to as "pre-normalization" in the literature of transformer models. == Applications == Originally, ResNet was designed for computer vision. All transformer architectures include residual connections. Indeed, very deep transformers cannot be trained without them. The original ResNet paper made no claim on being inspired by biological systems. However, later research has related ResNet to biologically-plausible algorithms. A study published in Science in 2023 disclosed the complete connectome of an insect brain (specifically that of a fruit fly larva). This study discovered "multilayer shortcuts" that resemble the skip connections in artificial neural networks, including ResNets. == History == === Previous work === Residual connections were noticed in neu

  Read more →
• 

  NCAA transfer portal

  The NCAA transfer portal is a National Collegiate Athletic Association (NCAA) application, database, and compliance tool that facilitates student athletes' transfers between member institutions. It is intended to bring greater transparency to the transfer process and to enable student athletes to publicize their desire to transfer. The transfer portal is an NCAA-wide database covering all three NCAA divisions, although most media coverage of the transfer portal involves its use in the top-level Division I (D-I). The portal launched on October 15, 2018. Regulations adopted in 2021 allowed student-athletes in D-I football, men's and women's basketball, men's ice hockey, and baseball to transfer schools using the portal once without sitting out a year. In 2024, the NCAA authorized athletes unlimited transfers. == Process == For Divisions I and II, once an athlete desiring to transfer informs their school; the school must enter the athlete's name in the database within two business days. Then coaches and staff from other universities may contact the athlete about potentially transferring. Before the January 2026 NCAA convention, Division III schools were allowed, but not required, to enter such a student into the portal. A proposal to require use of the portal in that division was approved at the convention. The timeline for D-III members to enter athletes into the portal differs from that of the other divisions. Athletes wishing to enter the portal must first complete an educational module. Once completed, the school has seven calendar days to enter the athlete's transfer request into the portal. == Transfer windows == On August 31, 2022, the D-I board adopted a series of changes to transfer rules, introducing the concept of transfer windows, similar to those used in professional soccer worldwide. Student-athletes who wish to take advantage of the one-time transfer rule must, under normal circumstances, enter the portal within a designated window for their sport. These windows are slightly different for each NCAA sport, but are broadly grouped by the NCAA's three athletic "seasons". At that time, the windows were as follows: Fall sports – A 45-day winter window opening the day after championship selections are made in that sport, and a spring window from May 1–15. According to the NCAA, "reasonable accommodations" would be made for participants in football's FBS and FCS championship games (respectively the College Football Playoff National Championship and Division I Football Championship Game), both of which take place in early January. Participants in those games had a 14-day window opening on the day after the championship game, as well as the spring window. Winter sports – A 60-day window opening the day after championship selections are made in that sport. Spring sports – A winter window from December 1–15, and a 45-day spring window opening the day after championship selections are made in that sport. For sports included in the NCAA Emerging Sports for Women program, transfer windows are the same as those for fully recognized NCAA sports. As with fully recognized NCAA sports, transfer windows linked to championship events open on the day after selections are made for the generally recognized championship events in emerging sports. Student-athletes whose athletic aid is reduced, canceled, or not renewed by their school, as well as those affected by a university's elimination of a sports team, may enter the transfer portal at any time without penalty. A slightly different exception applies to those undergoing a head coaching change; student-athletes so affected in sports other than Division I football can enter the portal within 30 days of the change, starting on the day after the coach's departure is announced. The coaching change window also applied to Division I football before October 2025. Less than a month after transfer windows were adopted, the Division I Council adopted a change that affected only graduate transfers. Student-athletes who are set to graduate with remaining athletic eligibility, and plan to continue competition as postgraduate students, were exempt from transfer windows. They could enter the portal at any time during the academic year, and were not subject to the standard deadlines of May 1 for fall and winter sports and July 1 for spring sports. In April 2024, graduate transfers became subject to the same deadlines as all other transfer students. This change did not affect windows for student-athletes affected by a head coaching change, a loss of athletic aid, or the discontinuation of a team. Because the Ivy League allows neither redshirting nor athletic participation by graduate students, athletes at its member schools who are set to complete four years of attendance but still have remaining athletic eligibility may enter the portal at any time during their fourth academic year of attendance. In October 2024, the Division I Council reduced transfer windows in football and basketball to a total of 30 days. For FBS and FCS football, the fall window opened for 20 days, starting on the Monday after FBS conference championship games. Participants in postseason play had a 5-day window that opened on the day after each team's final game. A 10-day spring window opened in mid-April. In men's and women's basketball, a single 30-day window opens on the day after the second round of each Division I tournament concludes. The existing exceptions regarding head coaching changes, a loss of athletic aid, or the discontinuation of a team remained in place. Almost exactly a year later, Division I adopted more significant changes to the football transfer portal for both FBS and FCS. The previous two windows were abolished and replaced by a single window that opens from January 2–16. Participants in the College Football Playoff National Championship—the only game in FBS or FCS played after the closure of the new window—receive a 5-day window that opens on the day after that game. The window for players undergoing a head coaching change was also reduced. A new window of 15 days opens five calendar days after the hiring or public announcement of a new head coach. Should a school fail to hire or publicly announce a new head coach within 30 days after the previous coach's departure, the window will open on the 31st day after departure, provided that the 31st day is no earlier than January 3. This particular window, also open for 15 days, may open at any time before June 30. No change was announced to the exceptions for those affected by a loss of athletic aid or the discontinuation of a team. == Impact on high school recruiting == Effective July 1, 2025, the NCAA Division I Board of Directors implemented new DI roster limits following the court-approved House settlement. Additionally, according to the NCAA, "NCAA rules for Division I programs will no longer include sport-specific scholarship limits." As a result, many top Division I programs, especially those in power conferences, are relying heavily on the transfer portal to bring in conference- and national-level student-athletes. This shift in recruiting focus has already been exemplified across Division I men's and women's track and field especially, beginning in the recruitment cycle for 2025 college entries. Track and field coaches formerly managing rosters of 120-plus (60-plus men and 60-plus women) are now limited to 45 per side for a total of 90 roster spots across men's and women's track and field, meaning they are recruiting fewer student-athletes out of high school and more immediately impactful scholarship-worthy student-athletes via the transfer portal. Roster limits for track and field teams are even more stringent in the Southeastern Conference (SEC): 35 men and 35 women. For high school track and field athletes seeking opportunities with top DI programs, they no longer need to display potential to be point-scorers, but demonstrate the ability to contribute immediately, often by competing at a level aligned with conference scoring standards.

  Read more →
• 

  LRE Map

  The LRE Map (Language Resources and Evaluation) is a freely accessible large database on resources dedicated to Natural language processing. The original feature of LRE Map is that the records are collected during the submission of different major Natural language processing conferences. The records are then cleaned and gathered into a global database called "LRE Map". The LRE Map is intended to be an instrument for collecting information about language resources and to become, at the same time, a community for users, a place to share and discover resources, discuss opinions, provide feedback, discover new trends, etc. It is an instrument for discovering, searching and documenting language resources, here intended in a broad sense, as both data and tools. The large amount of information contained in the Map can be analyzed in many different ways. For instance, the LRE Map can provide information about the most frequent type of resource, the most represented language, the applications for which resources are used or are being developed, the proportion of new resources vs. already existing ones, or the way in which resources are distributed to the community. == Context == Several institutions worldwide maintain catalogues of language resources (ELRA, LDC, NICT Universal Catalogue, ACL Data and Code Repository, OLAC, LT World, etc.) However, it has been estimated that only 10% of existing resources are known, either through distribution catalogues or via direct publicity by providers (web sites and the like). The rest remains hidden, the only occasions where it briefly emerges being when a resource is presented in the context of a research paper or report at some conference. Even in this case, nevertheless, it might be that a resource remains in the background simply because the focus of the research is not on the resource per se. == History == The LRE Map originated under the name "LREC Map" during the preparation of LREC 2010 conference. More specifically, the idea was discussed within the FlaReNet project, and in collaboration with ELRA and the Institute of Computational Linguistics of CNR in Pisa, the Map was put in place at LREC 2010. The LREC organizers asked the authors to provide some basic information about all the resources (in a broad sense, i.e. including tools, standards and evaluation packages), either used or created, described in their papers. All these descriptors were then gathered in a global matrix called the LREC Map. The same methodology and requirements from the authors has been then applied and extended to other conferences, namely COLING-2010, EMNLP-2010, RANLP-2011, LREC 2012, LREC 2014 and LREC 2016. After this generalization to other conferences, the LREC Map has been renamed as the LRE Map. == Size and content == The size of the database increases over time. The data collected amount to 4776 entries. Each resource is described according to the following attributes: Resource type, e.g. lexicon, annotation tool, tagger/parser. Resource production status, e.g. newly created finished, existing-updated. Resource availability, e.g. freely available, from data center. Resource modality, e.g. speech, written, sign language. Resource use, e.g. named entity recognition, language identification, machine translation. Resource language, e.g. English, 23 European Union languages, official languages of India. == Uses == The LRE map is a very important tool to chart the NLP field. Compared to other studied based on subjective scorings, the LRE map is made of real facts. The map has a great potential for many uses, in addition to being an information gathering tool: It is a great instrument for monitoring the evolution of the field (useful for funders), if applied in different contexts and times. It can be seen as a huge joint effort, the beginning of an even larger cooperative action not just among few leaders but among all the researchers. It is also an "educational" means towards the broad acknowledgment of the need of meta-research activities with the active involvement of many. It is also instrumental in introducing the new notion of "citation of resources" that could provide an award and a means of scholarly recognition for researchers engaged in resource creation. It is used to help the organization of the conferences of the field like LREC. == Derived matrices == The data were then cleaned and sorted by Joseph Mariani (CNRS-LIMSI IMMI) and Gil Francopoulo (CNRS-LIMSI IMMI + Tagmatica) in order to compute the various matrices of the final FLaReNet reports. One of them, the matrix for written data at LREC 2010 is as follows: English is the most studied language. Secondly, come French and German languages and then Italian and Spanish. == Future == The LRE Map has been extended to Language Resources and Evaluation Journal and other conferences.

  Read more →
• 

  Document mosaicing

  Document mosaicing is a process that stitches multiple, overlapping snapshot images of a document together to produce one large, high resolution composite. The document is slid under a stationary, over-the-desk camera by hand until all parts of the document are snapshotted by the camera's field of view. As the document slid under the camera, all motion of the document is coarsely tracked by the vision system. The document is periodically snapshotted such that the successive snapshots are overlap by about 50%. The system then finds the overlapped pairs and stitches them together repeatedly until all pairs are stitched together as one piece of document. The document mosaicing can be divided into four main processes. Tracking Feature detecting Correspondences establishing Images mosaicing. == Tracking (simple correlation process) == In this process, the motion of the document slid under the camera is coarsely tracked by the system. Tracking is performed by a process called simple correlation process. In the first frame of snapshots, a small patch is extracted from the center of the image as a correlation template. The correlation process is performed in the four times size of the patch area of the next frame. The motion of the paper is indicated by the peak in the correlation function. The peak in the correlation function indicates the motion of the paper. The template is resampled from this frame and the tracking continues until the template reaches the edge of the document. After the template reaches the edge of the document, another snapshot is taken and the tracking process performs repeatedly until the whole document is imaged. The snapshots are stored in an ordered list to facilitate pairing the overlapped images in later processes. == Feature detecting for efficient matching == Feature detection is the process of finding the transformation that aligns one image with another. There are two main approaches for feature detection. Feature-based approach : Motion parameters are estimated from point correspondences. This approach is suitable for the case that there is plenty supply of stable and detectable features. Featureless approach : When the motion between the two images is small, the motion parameters are estimated using optical flow. On the other hand, when the motion between the two images is large, the motion parameters are estimated using generalised cross-correlation. However, this approach requires a computationally expensive resources. Each image is segmented into a hierarchy of columns, lines, and words to match the organised sets of features across images. Skew angle estimation and columns, lines and words finding are the examples of feature detection operations. === Skew angle estimation === Firstly, the angle that the rows of text make with the image raster lines (skew angle) is estimated. It is assumed to lie in the range of ±20°. A small patch of text in the image is selected randomly and then rotated in the range of ±20° until the variance of the pixel intensities of the patch summed along the raster lines is maximised. To ensure that the found skew angle is accurate, the document mosaic system performs calculation at many image patches and derive the final estimation by finding the average of the individual angles weighted by the variance of the pixel intensities of each patch. === Columns, lines and words finding === In this operation, the de-skewed document is intuitively segmented into a hierarchy of columns, lines and words. The sensitivity to illumination and page coloration of the de-skewed document can be removed by applying a Sobel operator to the de-skewed image and thresholding the output to obtain the binary gradient, de-skewed image. The operation can be roughly separated into 3 steps: column segmentation, line segmentation and word segmentation. Columns are easily segmented from the binary gradient, de-skewed images by summing pixels vertically. Baselines of each row are segmented in the same way as the column segmentation process but horizontally. Finally, individual words are segmented by applying the vertical process at each segmented row. These segmentations are important because the document mosaic is created by matching the lower right corners of words in overlapping images pair. Moreover, the segmentation operation can organize the list of images in the context of a hierarchy of rows and column reliably. The segmentation operation involves a considerable amount of summing in the binary gradient, de-skewed images, which done by construct a matrix of partial sums whose elements are given by p i y = ∑ u = 1 i ∑ v = 1 j b u v {\displaystyle p_{iy}=\sum _{u=1}^{i}\sum _{v=1}^{j}b_{uv}} The matrix of partial sums is calculated in one pass through the binary gradient, de-skewed image. ∑ u = u 1 u 2 ∑ v = v 1 v 2 b u v = p u 2 v 2 + p u 1 v 1 − p u 1 v 2 − p u 2 v 1 {\displaystyle \sum _{u=u_{1}}^{u_{2}}\sum _{v=v_{1}}^{v_{2}}b_{uv}=p_{u_{2}v_{2}}+p_{u_{1}v_{1}}-p_{u_{1}v_{2}}-p_{u_{2}v_{1}}} == Correspondences establishing == The two images are now organized in hierarchy of linked lists in following structure : image=list of columns row=list of words column=list of row word=length (in pixels) At the bottom of the structure, the length of each word is recorded for establishing correspondence between two images to reduce to search only the corresponding structures for the groups of words with the matching lengths. === Seed match finding === A seed match finding is done by comparing each row in image1 with each row in image2. The two rows are then compared to each other by every word. If the length (in pixel) of the two words (one from image1 and one from image2) and their immediate neighbours agree with each other within a predefined tolerance threshold (5 pixels, for example), then they are assumed to match. The row of each image is assumed a match if there are three or more word matches between the two rows. The seed match finding operation is terminated when two pairs of consecutive row match are found. === Match list building === After finishing a seed match finding operation, the next process is to build the match list to generate the correspondences points of the two images. The process is done by searching the matching pairs of rows away from the seed row. == Images mosaicing == Given the list of corresponding points of the two images, finding the transformation of the overlapping portion of the images is the next process. Assuming a pinhole camera model, the transformation between pixels (u,v) of image 1 and pixels (u0, v0) of image 2 is demonstrated by a plane-to-plane projectivity. [ s u ′ s v ′ s ] = [ p 11 p 12 p 13 p 21 p 22 p 23 p 31 p 32 1 ] [ u v 1 ] E q .1 {\displaystyle \left[{\begin{array}{c}su'\\sv'\\s\end{array}}\right]=\left[{\begin{array}{ccc}p_{11}&p_{12}&p_{13}\\p_{21}&p_{22}&p_{23}\\p_{31}&p_{32}&1\end{array}}\right]\left[{\begin{array}{c}u\\v\\1\end{array}}\right]\qquad Eq.1} The parameters of the projectivity is found from four pairs of matching points. RANSAC regression technique is used to reject outlying matches and estimate the projectivity from the remaining good matches. The projectivity is fine-tuned using correlation at the corners of the overlapping portion to obtain four correspondences to sub-pixel accuracy. Therefore, image1 is then transformed into image2's coordinate system using Eq.1. The typical result of the process is shown in Figure 5. === Many images coping === Finally, the whole page composition is built up by mapping all the images into the coordinate system of an "anchor" image, which is normally the one nearest the page center. The transformations to the anchor frame are calculated by concatenating the pair-wise transformations found earlier. The raw document mosaic is shown in Figure 6. However, there might be a problem of non-consecutive images that are overlap. This problem can be solved by performing Hierarchical sub-mosaics. As shown in Figure 7, image1 and image2 are registered, as are image3 and image4, creating two sub-mosaics. These two sub-mosaics are later stitched together in another mosaicing process. == Applied areas == There are various areas that the technique of document mosaicing can be applied to such as : Text segmentation of images of documents Document Recognition Interaction with paper on the digital desk Video mosaics for virtual environments Image registration techniques == Relevant research papers == Huang, T.S.; Netravali, A.N. (1994). "Motion and structure from feature correspondences: A review". Proceedings of the IEEE. 82 (2): 252–268. doi:10.1109/5.265351. D.G. Lowe. [1] Perceptual Organization and Visual Recognition. Kluwer Academic Publishers, Boston, 1985. Irani, M.; Peleg, S. (1991). "Improving resolution by image registration". CVGIP: Graphical Models and Image Processing. 53 (3): 231–239. doi:10.1016/1049-9652(91)90045-L. S2CID 4834546. Shivakumara, P.; Kumar, G. Hemantha; Guru, D. S.; Nagabhushan, P. (2006). "

  Read more →
• 

  Information extraction

  Information extraction (IE) is the task of automatically extracting structured information from unstructured and/or semi-structured machine-readable documents and other electronically represented sources. Typically, this involves processing human language texts by means of natural language processing (NLP). Recent activities in multimedia document processing like automatic annotation and content extraction out of images/audio/video/documents could be seen as information extraction. Recent advances in NLP techniques have allowed for significantly improved performance compared to previous years. An example is the extraction from newswire reports of corporate mergers, such as denoted by the formal relation: MergerBetween ⁡ ( c o m p a n y 1 , c o m p a n y 2 , d a t e ) {\displaystyle \operatorname {MergerBetween} (\mathrm {company} _{1},\mathrm {company} _{2},\mathrm {date} )} , from an online news sentence such as: "Yesterday, New York based Foo Inc. announced their acquisition of Bar Corp." A broad goal of IE is to allow computation to be done on the previously unstructured data. A more specific goal is to allow automated reasoning about the logical form of the input data. Structured data is semantically well-defined data from a chosen target domain, interpreted with respect to category and context. Information extraction is the part of a greater puzzle which deals with the problem of devising automatic methods for text management, beyond its transmission, storage and display. The discipline of information retrieval (IR) has developed automatic methods, typically of a statistical flavor, for indexing large document collections and classifying documents. Another complementary approach is that of natural language processing (NLP) which has solved the problem of modelling human language processing with considerable success when taking into account the magnitude of the task. In terms of both difficulty and emphasis, IE deals with tasks in between both IR and NLP. In terms of input, IE assumes the existence of a set of documents in which each document follows a template, i.e. describes one or more entities or events in a manner that is similar to those in other documents but differing in the details. An example, consider a group of newswire articles on Latin American terrorism with each article presumed to be based upon one or more terroristic acts. We also define for any given IE task a template, which is a(or a set of) case frame(s) to hold the information contained in a single document. For the terrorism example, a template would have slots corresponding to the perpetrator, victim, and weapon of the terroristic act, and the date on which the event happened. An IE system for this problem is required to "understand" an attack article only enough to find data corresponding to the slots in this template. == History == Information extraction dates back to the late 1970s in the early days of NLP. An early commercial system from the mid-1980s was JASPER built for Reuters by the Carnegie Group Inc with the aim of providing real-time financial news to financial traders. Beginning in 1987, IE was spurred by a series of Message Understanding Conferences. MUC is a competition-based conference that focused on the following domains: MUC-1 (1987), MUC-3 (1989): Naval operations messages. MUC-3 (1991), MUC-4 (1992): Terrorism in Latin American countries. MUC-5 (1993): Joint ventures and microelectronics domain. MUC-6 (1995): News articles on management changes. MUC-7 (1998): Satellite launch reports. Considerable support came from the U.S. Defense Advanced Research Projects Agency (DARPA), who wished to automate mundane tasks performed by government analysts, such as scanning newspapers for possible links to terrorism. == Present significance == The present significance of IE pertains to the growing amount of information available in unstructured form. Tim Berners-Lee, inventor of the World Wide Web, refers to the existing Internet as the web of documents and advocates that more of the content be made available as a web of data. Until this transpires, the web largely consists of unstructured documents lacking semantic metadata. Knowledge contained within these documents can be made more accessible for machine processing by means of transformation into relational form, or by marking-up with XML tags. An intelligent agent monitoring a news data feed requires IE to transform unstructured data into something that can be reasoned with. A typical application of IE is to scan a set of documents written in a natural language and populate a database with the information extracted. == Tasks and subtasks == Applying information extraction to text is linked to the problem of text simplification in order to create a structured view of the information present in free text. The overall goal being to create a more easily machine-readable text to process the sentences. Typical IE tasks and subtasks include: Template filling: Extracting a fixed set of fields from a document, e.g. extract perpetrators, victims, time, etc. from a newspaper article about a terrorist attack. Event extraction: Given an input document, output zero or more event templates. For instance, a newspaper article might describe multiple terrorist attacks. Knowledge Base Population: Fill a database of facts given a set of documents. Typically the database is in the form of triplets, (entity 1, relation, entity 2), e.g. (Barack Obama, Spouse, Michelle Obama) Named entity recognition: recognition of known entity names (for people and organizations), place names, temporal expressions, and certain types of numerical expressions, by employing existing knowledge of the domain or information extracted from other sentences. Typically the recognition task involves assigning a unique identifier to the extracted entity. A simpler task is named entity detection, which aims at detecting entities without having any existing knowledge about the entity instances. For example, in processing the sentence "M. Smith likes fishing", named entity detection would denote detecting that the phrase "M. Smith" does refer to a person, but without necessarily having (or using) any knowledge about a certain M. Smith who is (or, "might be") the specific person whom that sentence is talking about. Coreference resolution: detection of coreference and anaphoric links between text entities. In IE tasks, this is typically restricted to finding links between previously extracted named entities. For example, "International Business Machines" and "IBM" refer to the same real-world entity. If we take the two sentences "M. Smith likes fishing. But he doesn't like biking", it would be beneficial to detect that "he" is referring to the previously detected person "M. Smith". Relationship extraction: identification of relations between entities, such as: PERSON works for ORGANIZATION (extracted from the sentence "Bill works for IBM.") PERSON located in LOCATION (extracted from the sentence "Bill is in France.") Semi-structured information extraction which may refer to any IE that tries to restore some kind of information structure that has been lost through publication, such as: Table extraction: finding and extracting tables from documents. Table information extraction : extracting information in structured manner from the tables. This task is more complex than table extraction, as table extraction is only the first step, while understanding the roles of the cells, rows, columns, linking the information inside the table and understanding the information presented in the table are additional tasks necessary for table information extraction. Comments extraction : extracting comments from the actual content of articles in order to restore the link between authors of each of the sentences Language and vocabulary analysis Terminology extraction: finding the relevant terms for a given corpus Audio extraction Template-based music extraction: finding relevant characteristic in an audio signal taken from a given repertoire; for instance time indexes of occurrences of percussive sounds can be extracted in order to represent the essential rhythmic component of a music piece. Note that this list is not exhaustive and that the exact meaning of IE activities is not commonly accepted and that many approaches combine multiple sub-tasks of IE in order to achieve a wider goal. Machine learning, statistical analysis and/or natural language processing are often used in IE. IE on non-text documents is becoming an increasingly interesting topic in research, and information extracted from multimedia documents can now be expressed in a high level structure as it is done on text. This naturally leads to the fusion of extracted information from multiple kinds of documents and sources. == World Wide Web applications == IE has been the focus of the MUC conferences. The proliferation of the Web, however, intensified the need for developing IE systems that help people

  Read more →
• 

  Webull

  Webull Corporation, often stylized as simply Webull, is a U.S.-based financial services holding company headquartered in St. Petersburg, Florida. It owns and operates the Webull electronic trading platform for self-directed retail investors. Depending on jurisdiction, the Webull platform offers trading in stocks, exchange-traded funds (ETFs), options, margin, bonds, cryptocurrency and futures, as well as market-data tools. Webull began operations in 2016 under Hunan Fumi Information Technology, a China-based financial technology company founded by Wang Anquan. It launched U.S. brokerage services through Webull Financial LLC in 2018 and expanded during the retail-trading boom of 2020 and 2021. In April 2025, Webull became a publicly traded company on the Nasdaq through a merger with special-purpose acquisition company SK Growth Opportunities Corporation. The company's U.S. brokerage revenue relies substantially on payment for order flow, with options trading accounting for the larger share of its order-flow rebates in 2025. Webull has faced regulatory actions related to options customer approvals, complaint handling, suspicious activity reporting, social-media marketing and customer disclosures. It has also faced scrutiny from U.S. lawmakers and state officials over its historical and operational ties to China and the handling of U.S. customer data. == History == === Founding === Webull was founded in 2016 under Hunan Fumi Information Technology, a China-based financial technology company, by Wang Anquan, a former employee of Alibaba Group and Xiaomi. Hunan Fumi Information Technology received backing from Xiaomi, Shunwei Capital, and other investors in China. Fumi Technology was a Hunan-based fintech start-up incubated by Xiaomi and raised about CNY200 million (approximately US$30 million) in a Series B financing round in 2018. On May 24, 2017, Webull Financial LLC was established as a Delaware limited liability company. It began offering brokerage services in the United States in May 2018. Wang hired Anthony Denier as CEO of the U.S. brokerage that year and the two mapped out their strategy on napkins at a Mexican restaurant in New York City. Webull Corporation was incorporated in the Cayman Islands in September 2019 as the group's holding company. === Retail trading boom === In May 2020, the company received SEC approval to launch a robo-advisor on its platform. By August 2020, the platform had over 11 million registered users, and in October 2020, it had 750,000 daily active users. Webull introduced options trading in 2020 and later added cryptocurrency trading through a separate digital-asset business. In November 2020, Webull began supporting cryptocurrency transactions. In December 2020, Webull launched trading services in Hong Kong. During the GameStop short squeeze in January 2021, Webull gained attention as some retail traders looked for alternatives to Robinhood. On January 27, 2021, Webull recorded its highest-ever number of active daily users, at 952,000, and the Webull app was downloaded across the Apple App and Google Play stores an estimated 100,000 times. That week, approximately 1.2 million people downloaded the Webull mobile app, which the company reported as a 1,548% week-over-week increase. On January 28, 2021, Webull was directed by its clearing house to temporarily halt buy orders for stocks affected by the GameStop short squeeze. In June 2021, Webull was reported to be considering a U.S. initial public offering that could raise up to $400 million. === Restructuring and expansion === Webull restructured its China-related corporate arrangements in 2022 and later stated that Hunan Fumi was no longer affiliated with the group. In 2022 and 2023, Webull expanded in several non-U.S. markets, including Singapore, Australia, South Africa, Japan, the United Kingdom and Indonesia. In June 2023, Webull moved cryptocurrency trading to a separate app called Webull Pay. By the end of 2023, Webull had 4.3 million funded accounts and US$8.2 billion in customer assets. In January 2024, Anthony Denier was promoted to group president of Webull Corporation. In November 2024, Webull launched overnight, or extended-hours, trading, expanding the trading window of U.S. stocks for users inside and outside the United States. === SPAC merger and Nasdaq listing === On February 28, 2024, Webull agreed to go public through a business combination with SK Growth Opportunities Corporation (NASDAQ: SKGR), a special-purpose acquisition company, in a deal that valued the company at approximately US$7.3 billion. The proposed valuation drew scrutiny because of Webull's limited financial disclosure at announcement, reliance on payment for order flow and small expected public float. SK Growth shareholders approved the business combination on March 30, 2025, and the transaction closed on April 10, 2025. Webull's Class A ordinary shares and warrants began trading on the Nasdaq on April 11, 2025 under the ticker symbols BULL and BULLW (incentive warrants traded under BULLZ until their redemption in June 2025). The merger brought Webull to the public market but generated little cash for the company: after shareholder redemptions, Webull disclosed net proceeds of US$430,066 from the transaction. After the listing, Webull's shares experienced extreme volatility, rising as much as 500% to US$79.56 on April 14, 2025, after closing at US$13.25 on the prior trading day. The initial post-listing surge increased the value of Webull holdings owned by earlier investors, including RIT Capital Partners, which had first invested in Webull in 2021. In April 2026, after Webull's shares had fallen about 70% over the previous year, the company authorized a US$100 million share repurchase program. == Business model and financials == Webull provides a self-directed electronic trading platform available through mobile, desktop and web applications. Depending on jurisdiction, the platform offers trading in stocks, exchange-traded funds, options, margin, futures, fixed income products, cryptocurrency, cash management features and market data tools. In the United States, Webull Financial LLC is a registered broker-dealer and member of FINRA and the Securities Investor Protection Corporation, while Webull operates in other markets through locally licensed brokerage subsidiaries. Webull operates a commission-free or low-cost brokerage model for self-directed retail investors. In the United States, a substantial part of its trading-related revenue comes from payment for order flow, while in some non-U.S. markets the company more commonly charges commissions directly to customers. The platform is aimed at more active retail investors, including users seeking options tools, extended-hours trading and real-time market data. For 2025, Webull reported total revenue of US$571.0 million, up from US$390.2 million in 2024. Equity and option order-flow rebates accounted for US$304.1 million, or 53.3% of revenue, making order-flow rebates the company's largest reported revenue category. Interest-related income accounted for US$154.3 million, handling charge income for US$87.3 million and other revenue for US$25.3 million. Options were the larger component of the company's order-flow rebates in 2025, generating US$210.0 million compared with US$94.2 million from equities. Webull also generates revenue from interest-related activities, including margin financing, customer bank deposits, stock lending and corporate bank deposits. The company has stated that its interest-related income is affected by interest rates, customer cash balances, margin balances and demand for stock lending. The company had approximately 20 million registered users worldwide as of February 2024. As of December 31, 2025, it reported 26.8 million registered users, 5.0 million funded accounts and US$24.6 billion in customer assets. As of March 2025, Webull operated in Hong Kong, Singapore, Australia, South Africa, Japan, the United Kingdom, the United States, Indonesia, Canada, Brazil, Thailand, Malaysia and Mexico. == Marketing and sponsorships == Webull has used paid digital advertising, referral incentives, free-stock promotions, affiliate marketing and sports sponsorships to acquire customers and promote its brand. In its 2025 annual filing, the company reported marketing and branding expenses of US$152.3 million in 2023, US$138.7 million in 2024 and US$135.9 million in 2025. Webull said most of its advertising and promotion costs were related to paid search and paid social advertising, and that it had reduced free-stock promotions while shifting toward deposit- and asset-transfer-based incentives. In September 2021, BSE Global, the parent company of the Brooklyn Nets and New York Liberty, entered into a global multi-year agreement with Webull. Under the agreement, Webull became an official sponsor and online brokerage partner of the teams, with branding that included a jersey patch on Brooklyn Nets uniforms. Spo

  Read more →
• 

  Inverse consistency

  In image registration, inverse consistency measures the consistency of mappings between images produced by a registration algorithm. The inverse consistency error, introduced by Christiansen and Johnson in 2001, quantifies the distance between the composition of the mappings from each image to the other, produced by the registration procedure, and the identity function, and is used as a regularisation constraint in the loss function of many registration algorithms to enforce consistent mappings. Inverse consistency is necessary for good image registration but it is not sufficient, since a mapping can be perfectly consistent but not register the images at all. == Definition == Image registration is the process of establishing a common coordinate system between two images, and given two images I 1 : Ω 1 → R I 2 : Ω 2 → R {\displaystyle {\begin{aligned}I_{1}:\Omega _{1}\to \mathbb {R} \\I_{2}:\Omega _{2}\to \mathbb {R} \end{aligned}}} registering a source image I 1 {\displaystyle I_{1}} to a target image I 2 {\displaystyle I_{2}} consists of determining a transformation f 1 : Ω 2 → Ω 1 {\displaystyle f_{1}:\Omega _{2}\to \Omega _{1}} that maps points from the target space to the source space. An ideal registration algorithm should not be sensitive to which image in the pair is used as source or target, and the registration operator should be antisymmetric such that the mappings f 1 : Ω 2 → Ω 1 f 2 : Ω 1 → Ω 2 {\displaystyle {\begin{aligned}f_{1}:\Omega _{2}\to \Omega _{1}\\f_{2}:\Omega _{1}\to \Omega _{2}\end{aligned}}} produced when registering I 1 {\displaystyle I_{1}} to I 2 {\displaystyle I_{2}} and I 2 {\displaystyle I_{2}} to I 1 {\displaystyle I_{1}} respectively should be the inverse of each other, i.e. f 2 = f 1 − 1 {\displaystyle f_{2}=f_{1}^{-1}} and f 1 = f 2 − 1 {\displaystyle f_{1}=f_{2}^{-1}} or, equivalently, f 2 ∘ f 1 = id Ω 2 {\displaystyle f_{2}\circ f_{1}=\operatorname {id} _{\Omega _{2}}} and f 1 ∘ f 2 = id Ω 1 {\displaystyle f_{1}\circ f_{2}=\operatorname {id} _{\Omega _{1}}} , where ∘ {\displaystyle \circ } denotes the function composition operator. Real algorithms are not perfect, and when swapping the role of source and target image in a registration problem the so obtained transformations are not the inverse of each other. Inverse consistency can be enforced by adding to the loss function of the registration a symmetric regularisation term that penalises inconsistent transformations ∫ Ω 2 ‖ f 2 ( f 1 ( x ) ) − x ‖ 2 d x + ∫ Ω 1 ‖ f 1 ( f 2 ( x ) ) − x ‖ 2 d x . {\displaystyle \int _{\Omega _{2}}\left\Vert f_{2}(f_{1}(x))-x\right\Vert ^{2}\mathrm {d} x+\int _{\Omega _{1}}\left\Vert f_{1}(f_{2}(x))-x\right\Vert ^{2}\mathrm {d} x.} Inverse consistency can be used as a quality metric to evaluate image registration results. The inverse consistency error ( I C E {\displaystyle ICE} ) measures the distance between the composition of the two transforms and the identity function, and it can be formulated in terms of both average ( I C E a {\displaystyle ICE_{a}} ) or maximum ( I C E m {\displaystyle ICE_{m}} ) over a region of interest Ω {\displaystyle \Omega } of the image: I C E a = 1 ∫ Ω d x ∫ Ω ‖ f 2 ( f 1 ( x ) ) − x ‖ d x I C E m = max x ∈ Ω ‖ f 2 ( f 1 ( x ) ) − x ‖ . {\displaystyle {\begin{aligned}ICE_{a}&={\frac {1}{\int _{\Omega }\mathrm {d} x}}\int _{\Omega }\left\Vert f_{2}(f_{1}(x))-x\right\Vert \mathrm {d} x\\ICE_{m}&=\max _{x\in \Omega }\left\Vert f_{2}(f_{1}(x))-x\right\Vert .\end{aligned}}} While inverse consistency is a necessary property of good registration algorithms, inverse consistency error alone is not a sufficient metric to evaluate the quality of image registration results, since a perfectly consistent mapping, with no other constraint, may be not even close to correctly register a pair of images.

  Read more →
• 

  Cache language model

  A cache language model is a type of statistical language model. These occur in the natural language processing subfield of computer science and assign probabilities to given sequences of words by means of a probability distribution. Statistical language models are key components of speech recognition systems and of many machine translation systems: they tell such systems which possible output word sequences are probable and which are improbable. The particular characteristic of a cache language model is that it contains a cache component and assigns relatively high probabilities to words or word sequences that occur elsewhere in a given text. The primary, but by no means sole, use of cache language models is in speech recognition systems. To understand why it is a good idea for a statistical language model to contain a cache component one might consider someone who is dictating a letter about elephants to a speech recognition system. Standard (non-cache) N-gram language models will assign a very low probability to the word "elephant" because it is a very rare word in English. If the speech recognition system does not contain a cache component, the person dictating the letter may be annoyed: each time the word "elephant" is spoken another sequence of words with a higher probability according to the N-gram language model may be recognized (e.g., "tell a plan"). These erroneous sequences will have to be deleted manually and replaced in the text by "elephant" each time "elephant" is spoken. If the system has a cache language model, "elephant" will still probably be misrecognized the first time it is spoken and will have to be entered into the text manually; however, from this point on the system is aware that "elephant" is likely to occur again – the estimated probability of occurrence of "elephant" has been increased, making it more likely that if it is spoken it will be recognized correctly. Once "elephant" has occurred several times, the system is likely to recognize it correctly every time it is spoken until the letter has been completely dictated. This increase in the probability assigned to the occurrence of "elephant" is an example of a consequence of machine learning and more specifically of pattern recognition. There exist variants of the cache language model in which not only single words but also multi-word sequences that have occurred previously are assigned higher probabilities (e.g., if "San Francisco" occurred near the beginning of the text subsequent instances of it would be assigned a higher probability). The cache language model was first proposed in a paper published in 1990, after which the IBM speech-recognition group experimented with the concept. The group found that implementation of a form of cache language model yielded a 24% drop in word-error rates once the first few hundred words of a document had been dictated. A detailed survey of language modeling techniques concluded that the cache language model was one of the few new language modeling techniques that yielded improvements over the standard N-gram approach: "Our caching results show that caching is by far the most useful technique for perplexity reduction at small and medium training data sizes". The development of the cache language model has generated considerable interest among those concerned with computational linguistics in general and statistical natural language processing in particular: recently, there has been interest in applying the cache language model in the field of statistical machine translation. The success of the cache language model in improving word prediction rests on the human tendency to use words in a "bursty" fashion: when one is discussing a certain topic in a certain context, the frequency with which one uses certain words will be quite different from their frequencies when one is discussing other topics in other contexts. The traditional N-gram language models, which rely entirely on information from a very small number (four, three, or two) of words preceding the word to which a probability is to be assigned, do not adequately model this "burstiness". Recently, the cache language model concept – originally conceived for the N-gram statistical language model paradigm – has been adapted for use in the neural paradigm. For instance, recent work on continuous cache language models in the recurrent neural network (RNN) setting has applied the cache concept to much larger contexts than before, yielding significant reductions in perplexity. Another recent line of research involves incorporating a cache component in a feed-forward neural language model (FN-LM) to achieve rapid domain adaptation.

  Read more →
• 

  WaveNet

  WaveNet is a deep neural network for generating raw audio. It was created by researchers at London-based AI firm DeepMind. The technique, outlined in a paper in September 2016, is able to generate relatively realistic-sounding human-like voices by directly modelling waveforms using a neural network method trained with recordings of real speech. Tests with US English and Mandarin reportedly showed that the system outperforms Google's best existing text-to-speech (TTS) systems, although as of 2016 its text-to-speech synthesis still was less convincing than actual human speech. WaveNet's ability to generate raw waveforms means that it can model any kind of audio, including music. == History == Generating speech from text is an increasingly common task thanks to the popularity of software such as Apple's Siri, Microsoft's Cortana, Amazon Alexa and the Google Assistant. Most such systems use a variation of a technique that involves concatenated sound fragments together to form recognisable sounds and words. The most common of these is called concatenative TTS. It consists of large library of speech fragments, recorded from a single speaker that are then concatenated to produce complete words and sounds. The result sounds unnatural, with an odd cadence and tone. The reliance on a recorded library also makes it difficult to modify or change the voice. Another technique, known as parametric TTS, uses mathematical models to recreate sounds that are then assembled into words and sentences. The information required to generate the sounds is stored in the parameters of the model. The characteristics of the output speech are controlled via the inputs to the model, while the speech is typically created using a voice synthesiser known as a vocoder. This can also result in unnatural sounding audio. == Design and ongoing research == === Background === WaveNet is a type of feedforward neural network known as a deep convolutional neural network (CNN). In WaveNet, the CNN takes a raw signal as an input and synthesises an output one sample at a time. It does so by sampling from a softmax (i.e. categorical) distribution of a signal value that is encoded using μ-law companding transformation and quantized to 256 possible values. === Initial concept and results === According to the original September 2016 DeepMind research paper WaveNet: A Generative Model for Raw Audio, the network was fed real waveforms of speech in English and Mandarin. As these pass through the network, it learns a set of rules to describe how the audio waveform evolves over time. The trained network can then be used to create new speech-like waveforms at 16,000 samples per second. These waveforms include realistic breaths and lip smacks – but do not conform to any language. WaveNet is able to accurately model different voices, with the accent and tone of the input correlating with the output. For example, if it is trained with German, it produces German speech. The capability also means that if the WaveNet is fed other inputs – such as music – its output will be musical. At the time of its release, DeepMind showed that WaveNet could produce waveforms that sound like classical music. === Content (voice) swapping === According to the June 2018 paper Disentangled Sequential Autoencoder, DeepMind has successfully used WaveNet for audio and voice "content swapping": the network can swap the voice on an audio recording for another, pre-existing voice while maintaining the text and other features from the original recording. "We also experiment on audio sequence data. Our disentangled representation allows us to convert speaker identities into each other while conditioning on the content of the speech." (p. 5) "For audio, this allows us to convert a male speaker into a female speaker and vice versa [...]." (p. 1) According to the paper, a two-digit minimum amount of hours (c. 50 hours) of pre-existing speech recordings of both source and target voice are required to be fed into WaveNet for the program to learn their individual features before it is able to perform the conversion from one voice to another at a satisfying quality. The authors stress that "[a]n advantage of the model is that it separates dynamical from static features [...]." (p. 8), i. e. WaveNet is capable of distinguishing between the spoken text and modes of delivery (modulation, speed, pitch, mood, etc.) to maintain during the conversion from one voice to another on the one hand, and the basic features of both source and target voices that it is required to swap on the other. The January 2019 follow-up paper Unsupervised speech representation learning using WaveNet autoencoders details a method to successfully enhance the proper automatic recognition and discrimination between dynamical and static features for "content swapping", notably including swapping voices on existing audio recordings, in order to make it more reliable. Another follow-up paper, Sample Efficient Adaptive Text-to-Speech, dated September 2018 (latest revision January 2019), states that DeepMind has successfully reduced the minimum amount of real-life recordings required to sample an existing voice via WaveNet to "merely a few minutes of audio data" while maintaining high-quality results. Its ability to clone voices has raised ethical concerns about WaveNet's ability to mimic the voices of living and dead persons. According to a 2016 BBC article, companies working on similar voice-cloning technologies (such as Adobe Voco) intend to insert watermarking inaudible to humans to prevent counterfeiting, while maintaining that voice cloning satisfying, for instance, the needs of entertainment-industry purposes would be of a far lower complexity and use different methods than required to fool forensic evidencing methods and electronic ID devices, so that natural voices and voices cloned for entertainment-industry purposes could still be easily told apart by technological analysis. == Applications == At the time of its release, DeepMind said that WaveNet required too much computational processing power to be used in real world applications. As of October 2017, Google announced a 1,000-fold performance improvement along with better voice quality. WaveNet was then used to generate Google Assistant voices for US English and Japanese across all Google platforms. In November 2017, DeepMind researchers released a research paper detailing a proposed method of "generating high-fidelity speech samples at more than 20 times faster than real-time", called "Probability Density Distillation". At the annual I/O developer conference in May 2018, it was announced that new Google Assistant voices were available and made possible by WaveNet; WaveNet greatly reduced the number of audio recordings that were required to create a voice model by modeling the raw audio of the voice actor samples.

  Read more →
• 

  I Am Rich

  I Am Rich is a discontinued 2008 mobile app for iPhones which had minimal function and was priced at US$999.99 (equivalent to $1,495 in 2025). The app was pulled from the App Store less than 24 hours after its launch. Receiving negative reviews from critics, only eight copies were sold. In the years since, several similar applications have been released at lower prices. == Overview == I Am Rich was developed as a joke by German software developer, Armin Heinrich, after he saw iPhone users complaining about software priced above $0.99. The app only showed a glowing red gem and an icon that, when pressed, displayed the following mantra in large text: I am richI deserv [sic] itI am good,healthy & successful Heinrich told The New York Times that "I regard it as art. I did not expect many people to buy it and did not expect all the fuss about it." The application is described as "a work of art with no hidden function at all", with its only purpose being to show other people that they were able to afford it. Vox writer Zachary Crockett called it "the ultimate Veblen good in app form". == Release == Heinrich released and distributed I Am Rich through the App Store on 5 August 2008. The app was sold for US$999.99 (equivalent to $1,495 in 2025), €799.99 (equivalent to €1,078 in 2023), and £599.99 (equivalent to £978.12 in 2025)—the highest prices Apple allowed for App Store content. Without explanation, the application was removed from the App Store by Apple less than a day after its release. === Purchases === Eight people bought the application, at least one of whom claimed to have done so accidentally. Six US sales and two European sales netted $5,600 for Heinrich and $2,400 for Apple (respectively equivalent to $8,374 and $3,589 in 2025). In correspondence with the Los Angeles Times, Heinrich told the newspaper that Apple had refunded two purchasers of his app, and that he was happy to not have dissatisfied customers. == Reception == Discussing the app on the website Silicon Alley Insider, Dan Frommer described the program as a "scam", "worthless", and finally "a joke that smells like a scammy rip-off" on August 5, 6, and 8, respectively. Without purchasing the app, Fox News's Paul Wagenseil guessed that the secret mantra was "German for 'Sucker!'" (Heinrich is German). Wired's Brian X. Chen described I Am Rich as a waste of money to "prove you're a jerk", and contrasted the expenditure with donating to cancer foundations and Third World countries. Heinrich told the Los Angeles Times's Mark Milian that he had received correspondence from satisfied customers: "I've got e-mails from customers telling me that they really love the app [... and that they had] no trouble spending the money". In an interview with The New York Times, though, he told of receiving many insulting emails and telephone messages. == Similar applications == The next year, Heinrich released I Am Rich LE. Priced at US$9.99 (equivalent to $14.99 in 2025), the new app has several new features (including a calculator, "help system", and the "famous mantra without the spelling mistakes") to meet Apple's requirement that apps have "definable content". Some customers were disappointed by the new functionality, poorly rating the app due to its ostensible improvements. On 23 February 2009, CNET Asia reported on the "conceptually similar" app, I Am Richer, developed by Mike DG for Google's Android. The app was released on the Android Market for US$200 (equivalent to $300.14 in 2025), a limit imposed by Google, who had no objection to the application. With the same name, the I Am Rich that was released on the Windows Phone Marketplace on 22 December 2010, was developed by DotNetNuzzi. Described by MobileCrunch as equally useless as the original, this app cost US$499.99 (equivalent to $738.2 in 2025), the price cap imposed by Microsoft.

  Read more →
• 

  Ericom Connect

  Ericom Connect is a remote access/application publishing solution produced by Ericom Software that provides secure, centrally managed access to physical or hosted desktops and applications running on Microsoft Windows and Linux systems. == Product overview == Ericom Connect is desktop virtualization and application virtualization software that allows users to run applications remotely, without installing them on the local computer or device. The software is noted for its scalability, ease of deployment, and compatibility with any type of infrastructure, cloud or physical. Ericom Connect uses AccessPad (native client for desktops), AccessToGo (native client for mobile), or AccessNow, one of the first HTML5 RDP solutions to support clientless access to Windows desktops and applications from any device with an HTML5-compatible browser, including Macintosh computers, mobile devices, and Google Chromebooks. Other notable features include performance monitoring, built-in real-time analytics & BI, support for two-factor authentication (using RSA SecurID), multi-tenancy and multi-datacenter support via a single unified web interface, and a “Launch Simulation” feature that allows users to visualize and simulate actual step-by-step user processes directly from within the administration console. In addition to scalability, by distributing configurations, logs, etc., across multiple servers there is no single point of failure, as can be the case if all configuration information is stored on one server. == History == Ericom Connect was introduced in 2015. Ericom Connect is a successor to Ericom PowerTerm Web Connect. PowerTerm Web Connect used an architecture similar to what was then current with Citrix and VMWare, relying on a centralized SQL server, a connection broker, image management for different hypervisors, and a variety of clients. Ericom Connect uses a new grid architecture that provides more scalability, reliability, and flexibility than before.

  Read more →
• 

  Outline of natural language processing

  Natural language processing is computer activity in which computers are entailed to analyze, understand, alter, or generate natural language. This includes the automation of any or all linguistic forms, activities, or methods of communication, such as conversation, correspondence, reading, written composition, dictation, publishing, translation, lip reading, and so on. Natural-language processing is also the name of the branch of computer science, artificial intelligence, and linguistics concerned with enabling computers to engage in communication using natural language(s) in all forms, including but not limited to speech, print, writing, and signing. The following outline is provided as an overview of and topical guide to natural-language processing: == Natural-language processing == Natural-language processing can be described as all of the following: A field of science – systematic enterprise that builds and organizes knowledge in the form of testable explanations and predictions about the universe. An applied science – field that applies human knowledge to build or design useful things. A field of computer science – scientific and practical approach to computation and its applications. A branch of artificial intelligence – intelligence of machines and robots and the branch of computer science that aims to create it. A subfield of computational linguistics – interdisciplinary field dealing with the statistical or rule-based modeling of natural language from a computational perspective. An application of engineering – science, skill, and profession of acquiring and applying scientific, economic, social, and practical knowledge, in order to design and also build structures, machines, devices, systems, materials and processes. An application of software engineering – application of a systematic, disciplined, quantifiable approach to the design, development, operation, and maintenance of software, and the study of these approaches; that is, the application of engineering to software. A subfield of computer programming – process of designing, writing, testing, debugging, and maintaining the source code of computer programs. This source code is written in one or more programming languages (such as Java, C++, C#, Python, etc.). The purpose of programming is to create a set of instructions that computers use to perform specific operations or to exhibit desired behaviors. A subfield of artificial intelligence programming – A type of system – set of interacting or interdependent components forming an integrated whole or a set of elements (often called 'components' ) and relationships which are different from relationships of the set or its elements to other elements or sets. A system that includes software – software is a collection of computer programs and related data that provides the instructions for telling a computer what to do and how to do it. Software refers to one or more computer programs and data held in the storage of the computer. In other words, software is a set of programs, procedures, algorithms and its documentation concerned with the operation of a data processing system. A type of technology – making, modification, usage, and knowledge of tools, machines, techniques, crafts, systems, methods of organization, in order to solve a problem, improve a preexisting solution to a problem, achieve a goal, handle an applied input/output relation or perform a specific function. It can also refer to the collection of such tools, machinery, modifications, arrangements and procedures. Technologies significantly affect human as well as other animal species' ability to control and adapt to their natural environments. A form of computer technology – computers and their application. NLP makes use of computers, image scanners, microphones, and many types of software programs. Language technology – consists of natural-language processing (NLP) and computational linguistics (CL) on the one hand, and speech technology on the other. It also includes many application oriented aspects of these. It is often called human language technology (HLT). == Prerequisite technologies == The following technologies make natural-language processing possible: Communication – the activity of a source sending a message to a receiver Language – Speech – Writing – Computing – Computers – Computer programming – Information extraction – User interface – Software – Text editing – program used to edit plain text files Word processing – piece of software used for composing, editing, formatting, printing documents Input devices – pieces of hardware for sending data to a computer to be processed Computer keyboard – typewriter style input device whose input is converted into various data depending on the circumstances Image scanners – == Subfields of natural-language processing == Information extraction (IE) – field concerned in general with the extraction of semantic information from text. This covers tasks such as named-entity recognition, coreference resolution, relationship extraction, etc. Ontology engineering – field that studies the methods and methodologies for building ontologies, which are formal representations of a set of concepts within a domain and the relationships between those concepts. Speech processing – field that covers speech recognition, text-to-speech and related tasks. Statistical natural-language processing – Statistical semantics – a subfield of computational semantics that establishes semantic relations between words to examine their contexts. Distributional semantics – a subfield of statistical semantics that examines the semantic relationship of words across a corpora or in large samples of data. == Related fields == Natural-language processing contributes to, and makes use of (the theories, tools, and methodologies from), the following fields: Automated reasoning – area of computer science and mathematical logic dedicated to understanding various aspects of reasoning, and producing software which allows computers to reason completely, or nearly completely, automatically. A sub-field of artificial intelligence, automatic reasoning is also grounded in theoretical computer science and philosophy of mind. Linguistics – scientific study of human language. Natural-language processing requires understanding of the structure and application of language, and therefore it draws heavily from linguistics. Applied linguistics – interdisciplinary field of study that identifies, investigates, and offers solutions to language-related real-life problems. Some of the academic fields related to applied linguistics are education, linguistics, psychology, computer science, anthropology, and sociology. Some of the subfields of applied linguistics relevant to natural-language processing are: Bilingualism / Multilingualism – Computer-mediated communication (CMC) – any communicative transaction that occurs through the use of two or more networked computers. Research on CMC focuses largely on the social effects of different computer-supported communication technologies. Many recent studies involve Internet-based social networking supported by social software. Contrastive linguistics – practice-oriented linguistic approach that seeks to describe the differences and similarities between a pair of languages. Conversation analysis (CA) – approach to the study of social interaction, embracing both verbal and non-verbal conduct, in situations of everyday life. Turn-taking is one aspect of language use that is studied by CA. Discourse analysis – various approaches to analyzing written, vocal, or sign language use or any significant semiotic event. Forensic linguistics – application of linguistic knowledge, methods and insights to the forensic context of law, language, crime investigation, trial, and judicial procedure. Interlinguistics – study of improving communications between people of different first languages with the use of ethnic and auxiliary languages (lingua franca). For instance by use of intentional international auxiliary languages, such as Esperanto or Interlingua, or spontaneous interlanguages known as pidgin languages. Language assessment – assessment of first, second or other language in the school, college, or university context; assessment of language use in the workplace; and assessment of language in the immigration, citizenship, and asylum contexts. The assessment may include analyses of listening, speaking, reading, writing or cultural understanding, with respect to understanding how the language works theoretically and the ability to use the language practically. Language pedagogy – science and art of language education, including approaches and methods of language teaching and study. Natural-language processing is used in programs designed to teach language, including first- and second-language training. Language planning – Language policy – Lexicography – Literacies – Pragmatics – Second-language acquisition – Stylistics – Translation – Comp

  Read more →