AI Headshot Generator

AI Headshot Generator — hands-on reviews, top picks, pricing, pros and cons and a practical how-to guide on Aizhi.

• 

  Cognitive computing

  Cognitive computing refers to technology platforms that, broadly speaking, are based on the scientific disciplines of artificial intelligence and signal processing. These platforms encompass machine learning, reasoning, natural language processing, speech recognition and vision (object recognition), human–computer interaction, dialog and narrative generation, among other technologies. == Definition == At present, there is no widely agreed upon definition for cognitive computing in either academia or industry. In general, the term cognitive computing has been used to refer to new hardware and/or software that mimics the functioning of the human brain (2004). In this sense, cognitive computing is a new type of computing with the goal of more accurate models of how the human brain/mind senses, reasons, and responds to stimulus. Cognitive computing applications link data analysis and adaptive page displays (AUI) to adjust content for a particular type of audience. As such, cognitive computing hardware and applications strive to be more affective and more influential by design. The term "cognitive system" also applies to any artificial construct able to perform a cognitive process where a cognitive process is the transformation of data, information, knowledge, or wisdom to a new level in the DIKW Pyramid. While many cognitive systems employ techniques having their origination in artificial intelligence research, cognitive systems, themselves, may not be artificially intelligent. For example, a neural network trained to recognize cancer on an MRI scan may achieve a higher success rate than a human doctor. This system is certainly a cognitive system but is not artificially intelligent. Cognitive systems may be engineered to feed on dynamic data in real-time, or near real-time, and may draw on multiple sources of information, including both structured and unstructured digital information, as well as sensory inputs (visual, gestural, auditory, or sensor-provided). == Cognitive analytics == Cognitive computing-branded technology platforms typically specialize in the processing and analysis of large, unstructured datasets. == Applications == Education Even if cognitive computing can not take the place of teachers, it can still be a heavy driving force in the education of students. Cognitive computing being used in the classroom is applied by essentially having an assistant that is personalized for each individual student. This cognitive assistant can relieve the stress that teachers face while teaching students, while also enhancing the student's learning experience over all. Teachers may not be able to pay each and every student individual attention, this being the place that cognitive computers fill the gap. Some students may need a little more help with a particular subject. For many students, Human interaction between student and teacher can cause anxiety and can be uncomfortable. With the help of Cognitive Computer tutors, students will not have to face their uneasiness and can gain the confidence to learn and do well in the classroom. While a student is in class with their personalized assistant, this assistant can develop various techniques, like creating lesson plans, to tailor and aid the student and their needs. Healthcare Numerous tech companies are in the process of developing technology that involves cognitive computing that can be used in the medical field. The ability to classify and identify is one of the main goals of these cognitive devices. This trait can be very helpful in the study of identifying carcinogens. This cognitive system that can detect would be able to assist the examiner in interpreting countless numbers of documents in a lesser amount of time than if they did not use Cognitive Computer technology. This technology can also evaluate information about the patient, looking through every medical record in depth, searching for indications that can be the source of their problems. Commerce Together with Artificial Intelligence, it has been used in warehouse management systems to collect, store, organize and analyze all related supplier data. All these aims at improving efficiency, enabling faster decision-making, monitoring inventory and fraud detection Human Cognitive Augmentation In situations where humans are using or working collaboratively with cognitive systems, called a human/cog ensemble, results achieved by the ensemble are superior to results obtainable by the human working alone. Therefore, the human is cognitively augmented. In cases where the human/cog ensemble achieves results at, or superior to, the level of a human expert then the ensemble has achieved synthetic expertise. In a human/cog ensemble, the "cog" is a cognitive system employing virtually any kind of cognitive computing technology. Other use cases Speech recognition Sentiment analysis Face detection Risk assessment Fraud detection Behavioral recommendations == Industry work == Cognitive computing in conjunction with big data and algorithms that comprehend customer needs, can be a major advantage in economic decision making. The powers of cognitive computing and artificial intelligence hold the potential to affect almost every task that humans are capable of performing. This can negatively affect employment for humans, as there would be no such need for human labor anymore. It would also increase the inequality of wealth; the people at the head of the cognitive computing industry would grow significantly richer, while workers without ongoing, reliable employment would become less well off. The more industries start to use cognitive computing, the more difficult it will be for humans to compete. Increased use of the technology will also increase the amount of work that AI-driven robots and machines can perform. The influence of competitive individuals in conjunction with artificial intelligence/cognitive computing has the potential to change the course of humankind.

  Read more →
• 

  INDECT

  INDECT is a research project in the area of intelligent security systems performed by several European universities since 2009 and funded by the European Union. The purpose of the project is to involve European scientists and researchers in the development of solutions to and tools for automatic threat detection through e.g. processing of CCTV camera data streams, standardization of video sequence quality for user applications, threat detection in computer networks as well as data and privacy protection. The area of research, applied methods, and techniques are described in the public deliverables which are available to the public on the project's website. Practically, all information related to the research is public. Only documents that comprise information related to financial data or information that could negatively influence the competitiveness and law enforcement capabilities of parties involved in the project are not published. This follows regulations and practices applied in EU research projects. == Application and target users == The main end-user of INDECT solutions are police forces and security services. The principle of operation of the project is detecting threats and identifying sources of threats, without monitoring and searching for particular citizens or groups of citizens. Then, the system operator (i.e. police officer) decides whether an intervention of services responsible for public security are required or not. Further investigation eventually leading to persons related to threats is performed, preserving the presumption of innocence, based on existing procedures already used by police services and prosecutors. As it can be found in the project deliverables, INDECT does not involve storage of personal data (such as names, addresses, identity document numbers, etc.). A similar, behavior-based surveillance program was SAMURAI (Suspicious and Abnormal behavior Monitoring Using a netwoRk of cAmeras & sensors for sItuation awareness enhancement). == Expected results == The main expected results of the INDECT project are: Trial of intelligent analysis of video and audio data for threat detection in urban environments Creation of tools and technology for privacy and data protection during storage and transmission of information using quantum cryptography and new methods of digital watermarking Performing computer-aided detection of threats and targeted crimes in Internet resources with privacy-protecting solutions Construction of a search engine for rapid semantic search based on watermarking of content related to child pornography and human organ trafficking Implementation of a distributed computer system that is capable of effective intelligent processing == Controversy == Some media and other sources accuse INDECT of privacy abuse, collecting personal data, and keeping information from the public. Consequently, these issues have been commented and discussed by some Members of the European Parliament. As seen in the project's documentation, INDECT does not involve mobile phone tracking or call interception. The rumors about testing INDECT during 2012 UEFA European Football Championship also turned out to be false. The mid-term review of the Seventh Framework Programme to the European Parliament strongly urges the European Commission to immediately make all documents available and to define a clear and strict mandate for the research goal, the application, and the end users of INDECT, and stresses a thorough investigation of the possible impact on fundamental rights. Nevertheless, according to Mr. Paweł Kowal, MEP, the project had the ethical review on 15 March 2011 in Brussels with the participation of ethics experts from Austria, France, Netherlands, Germany and Great Britain.

  Read more →
• 

  History of natural language processing

  The history of natural language processing describes the advances of natural language processing. There is some overlap with the history of machine translation, the history of speech recognition, and the history of artificial intelligence. == Early history == The history of machine translation dates back to the seventeenth century, when philosophers such as Leibniz and Descartes put forward proposals for codes which would relate words between languages. All of these proposals remained theoretical, and none resulted in the development of an actual machine. The first patents for "translating machines" were applied for in the mid-1930s. One proposal, by Georges Artsrouni, was simply an automatic bilingual dictionary using paper tape. The other proposal, by Peter Troyanskii, a Russian, was more detailed. Troyanskii’s proposal included both the bilingual dictionary and a method for dealing with grammatical roles between languages, based on Esperanto. == Logical period == In 1950, Alan Turing published his famous article "Computing Machinery and Intelligence" which proposed what is now called the Turing test as a criterion of intelligence. This criterion depends on the ability of a computer program to impersonate a human in a real-time written conversation with a human judge, sufficiently well that the judge is unable to distinguish reliably — on the basis of the conversational content alone — between the program and a real human. In 1957, Noam Chomsky’s Syntactic Structures revolutionized Linguistics with 'universal grammar', a rule-based system of syntactic structures. The Georgetown experiment in 1954 involved fully automatic translation of more than sixty Russian sentences into English. The authors claimed that within three or five years, machine translation would be a solved problem. However, real progress was much slower, and after the ALPAC report in 1966, which found that ten years long research had failed to fulfill the expectations, funding for machine translation was dramatically reduced. Little further research in machine translation was conducted until the late 1980s, when the first statistical machine translation systems were developed. Some notably successful NLP systems developed in the 1960s were SHRDLU, a natural language system working in restricted "blocks worlds" with restricted vocabularies. In 1969 Roger Schank introduced the conceptual dependency theory for natural language understanding. This model, partially influenced by the work of Sydney Lamb, was extensively used by Schank's students at Yale University, such as Robert Wilensky, Wendy Lehnert, and Janet Kolodner. In 1970, William A. Woods introduced the augmented transition network (ATN) to represent natural language input. Instead of phrase structure rules ATNs used an equivalent set of finite-state automata that were called recursively. ATNs and their more general format called "generalized ATNs" continued to be used for a number of years. During the 1970s many programmers began to write 'conceptual ontologies', which structured real-world information into computer-understandable data. Examples are MARGIE (Schank, 1975), SAM (Cullingford, 1978), PAM (Wilensky, 1978), TaleSpin (Meehan, 1976), QUALM (Lehnert, 1977), Politics (Carbonell, 1979), and Plot Units (Lehnert 1981). During this time, many chatterbots were written including PARRY, Racter, and Jabberwacky. == Statistical period == Up to the 1980s, most NLP systems were based on complex sets of hand-written rules. Starting in the late 1980s, however, there was a revolution in NLP with the introduction of machine learning algorithms for language processing. This was due both to the steady increase in computational power resulting from Moore's law and the gradual lessening of the dominance of Chomskyan theories of linguistics (e.g. transformational grammar), whose theoretical underpinnings discouraged the sort of corpus linguistics that underlies the machine-learning approach to language processing. Some of the earliest-used machine learning algorithms, such as decision trees, produced systems of hard if-then rules similar to existing hand-written rules. Increasingly, however, research has focused on statistical models, which make soft, probabilistic decisions based on attaching real-valued weights to the features making up the input data. The cache language models upon which many speech recognition systems now rely are examples of such statistical models. Such models are generally more robust when given unfamiliar input, especially input that contains errors (as is very common for real-world data), and produce more reliable results when integrated into a larger system comprising multiple subtasks. === Datasets === The emergence of statistical approaches was aided by both increase in computing power and the availability of large datasets. At that time, large multilingual corpora were starting to emerge. Notably, some were produced by the Parliament of Canada and the European Union as a result of laws calling for the translation of all governmental proceedings into all official languages of the corresponding systems of government. Many of the notable early successes occurred in the field of machine translation. In 1993, the IBM alignment models were used for statistical machine translation. Compared to previous machine translation systems, which were symbolic systems manually coded by computational linguists, these systems were statistical, which allowed them to automatically learn from large textual corpora. Though these systems do not work well in situations where only small corpora is available, so data-efficient methods continue to be an area of research and development. In 2001, a one-billion-word large text corpus, scraped from the Internet, referred to as "very very large" at the time, was used for word disambiguation. To take advantage of large, unlabelled datasets, algorithms were developed for unsupervised and self-supervised learning. Generally, this task is much more difficult than supervised learning, and typically produces less accurate results for a given amount of input data. However, there is an enormous amount of non-annotated data available (including, among other things, the entire content of the World Wide Web), which can often make up for the inferior results. == Neural period == Neural language models were developed in 1990s. In 1990, the Elman network, using a recurrent neural network, encoded each word in a training set as a vector, called a word embedding, and the whole vocabulary as a vector database, allowing it to perform such tasks as sequence-predictions that are beyond the power of a simple multilayer perceptron. A shortcoming of the static embeddings was that they didn't differentiate between multiple meanings of homonyms. Yoshua Bengio developed the first neural probabilistic language model in 2000. Novel algorithms, availability of larger datasets and higher processing power made possible training of larger and larger language models. Attention mechanism was introduced by Bahdanau et al. in 2014. This work laid the foundations for the famous "Attention Is All You Need" paper that introduced the Transformer architecture in 2017. The concept of large language model (LLM) emerged in late 2010s. LLM is a language model trained with self-supervised learning on vast amount of text. Earliest public LLMs had hundreds of millions of parameters, but this number quickly rose to billion and even trillions. In recent years, advancements in deep learning and large language models have significantly enhanced the capabilities of natural language processing, leading to widespread applications in areas such as healthcare, customer service, and content generation. == Software ==

  Read more →
• 

  INDECT

  INDECT is a research project in the area of intelligent security systems performed by several European universities since 2009 and funded by the European Union. The purpose of the project is to involve European scientists and researchers in the development of solutions to and tools for automatic threat detection through e.g. processing of CCTV camera data streams, standardization of video sequence quality for user applications, threat detection in computer networks as well as data and privacy protection. The area of research, applied methods, and techniques are described in the public deliverables which are available to the public on the project's website. Practically, all information related to the research is public. Only documents that comprise information related to financial data or information that could negatively influence the competitiveness and law enforcement capabilities of parties involved in the project are not published. This follows regulations and practices applied in EU research projects. == Application and target users == The main end-user of INDECT solutions are police forces and security services. The principle of operation of the project is detecting threats and identifying sources of threats, without monitoring and searching for particular citizens or groups of citizens. Then, the system operator (i.e. police officer) decides whether an intervention of services responsible for public security are required or not. Further investigation eventually leading to persons related to threats is performed, preserving the presumption of innocence, based on existing procedures already used by police services and prosecutors. As it can be found in the project deliverables, INDECT does not involve storage of personal data (such as names, addresses, identity document numbers, etc.). A similar, behavior-based surveillance program was SAMURAI (Suspicious and Abnormal behavior Monitoring Using a netwoRk of cAmeras & sensors for sItuation awareness enhancement). == Expected results == The main expected results of the INDECT project are: Trial of intelligent analysis of video and audio data for threat detection in urban environments Creation of tools and technology for privacy and data protection during storage and transmission of information using quantum cryptography and new methods of digital watermarking Performing computer-aided detection of threats and targeted crimes in Internet resources with privacy-protecting solutions Construction of a search engine for rapid semantic search based on watermarking of content related to child pornography and human organ trafficking Implementation of a distributed computer system that is capable of effective intelligent processing == Controversy == Some media and other sources accuse INDECT of privacy abuse, collecting personal data, and keeping information from the public. Consequently, these issues have been commented and discussed by some Members of the European Parliament. As seen in the project's documentation, INDECT does not involve mobile phone tracking or call interception. The rumors about testing INDECT during 2012 UEFA European Football Championship also turned out to be false. The mid-term review of the Seventh Framework Programme to the European Parliament strongly urges the European Commission to immediately make all documents available and to define a clear and strict mandate for the research goal, the application, and the end users of INDECT, and stresses a thorough investigation of the possible impact on fundamental rights. Nevertheless, according to Mr. Paweł Kowal, MEP, the project had the ethical review on 15 March 2011 in Brussels with the participation of ethics experts from Austria, France, Netherlands, Germany and Great Britain.

  Read more →
• 

  Automated dispensing cabinet

  An automated dispensing cabinet (ADC), also called a unit-based cabinet (UBC), automated dispensing device (ADD), or automated dispensing machine (ADM)[1], is a computerized medicine cabinet for hospitals and healthcare settings. ADCs allow medications to be stored and dispensed near the point of care while controlling and tracking drug distribution. == Overview == Hospital pharmacies have provided medications for patients by filling patient-specific cassettes of unit-dose medications that were then delivered to the nursing unit and stored in medication cabinets or carts. ADCs, originally designed for hospital use, were introduced in hospitals in the 1980s and have facilitated the transition to alternative delivery models and more decentralized medication distribution systems.[2] Implementing automated dispensing cabinets as part of a decentralized or hybrid medication distribution system can improve patient safety and the accountability of the inventory, streamline certain billing processes. However, in the 2000s, the technology began to be deployed into other care settings where medication doses were stored onsite, and higher security methods were needed to control inventory, access, and dispensing of each patient dose. Settings that now deploy ADCs include long-term care facilities, hospice, critical access hospitals, surgery centers, group homes, residential care facilities, rehab and psych environments, animal health, dental clinics, and nursing education simulation. These diverse care settings share a common need to safely store, account for, and dispense individual doses of medications, especially narcotics and high-value medications, at the point of care.[3] ADCs track user access and dispensed medications, and their use can improve control over medication inventory. The real-time inventory reports generated by many cabinets can simplify the filling process and help the pharmacy track expired drugs. Furthermore, by restricting individual drugs – such as high-risk medications and controlled substances – to unique drawers within the cabinet, overall inventory management, patient safety, and medication security can be improved. Automated dispensing cabinets allow the pharmacy department to profile physician orders before they are dispensed.[4] ADCs can also enable providers to record medication charges upon dispensing, reducing the billing paperwork the pharmacy is responsible for. In addition, nurses can note returned medications using the cabinets' computers, enabling direct credits to patients' accounts. Since automated cabinets can be located on the nursing unit floor, nursing have speedier access to a patient's medications. Also, shorter waiting time ensures improved patient comfort and care.[5] == Role of automated dispensing in healthcare == Automated dispensing is a pharmacy practice in which a device dispenses medications and fills prescriptions. ADCs, which can handle many different medications, are available from a number of manufacturers such as BD, ARxIUM, and Omnicell. Though members of the pharmacy community have been utilizing automation technology since the 1980s, companies are constantly improving ADCs to meet changing needs and health standards in the industry. Several goals can be met by implementing an automated product in a healthcare facility. Patient safety can be ensured with the use of ADC technology such as barcoding. Anesthesia ADCs in operating rooms and perioperative areas may include label printing to prevent mix-ups such as errors between morphine and hydromorphone, two different opioid analgesics that frequently get confused. These systems also communicate with the pharmacy and its information management system to track medications removed and support inventory replenishment. == Key features == ADCs are like automated teller machines whose specific technologies such as barcode scanning and clinical decision support can improve medication safety. Some have metal locking drawers for added security and some have automated single-dose dispensing to prevent the need for a blind count each time a controlled substance is accessed. Over the years, ADCs have been adapted to facilitate compliance with emerging regulatory requirements such as pharmacy review of medication orders and safe practice recommendations. ADCs incorporate advanced software and electronic interfaces to synthesize high-risk steps in the medication use process. These unit-based medication repositories provide computer-controlled storage, dispensation, tracking, and documentation of medication distribution in the resident care unit. Since automated dispensing cabinets are not located in the pharmacy, they are considered "decentralized" medication distribution systems. Instead, they can be found at the point of care on the resident care unit. Tracking of the stocking and distribution process can occur by interfacing the unit with a central pharmacy computer. These cabinets can also be interfaced with other external databases such as resident profiles, the facility's admission/discharge/transfer system, and billing systems. Most ADC providers offer scalable systems since several important factors vary widely by facility such as budget, physical room size, patient population/demographics, type of healthcare facility, etc.

  Read more →
• 

  Graph cut optimization

  Graph cut optimization is a combinatorial optimization method applicable to a family of functions of discrete variables, named after the concept of cut in the theory of flow networks. Thanks to the max-flow min-cut theorem, determining the minimum cut over a graph representing a flow network is equivalent to computing the maximum flow over the network. Given a pseudo-Boolean function f {\displaystyle f} , if it is possible to construct a flow network with positive weights such that each cut C {\displaystyle C} of the network can be mapped to an assignment of variables x {\displaystyle \mathbf {x} } to f {\displaystyle f} (and vice versa), and the cost of C {\displaystyle C} equals f ( x ) {\displaystyle f(\mathbf {x} )} (up to an additive constant) then it is possible to find the global optimum of f {\displaystyle f} in polynomial time by computing a minimum cut of the graph. The mapping between cuts and variable assignments is done by representing each variable with one node in the graph and, given a cut, each variable will have a value of 0 if the corresponding node belongs to the component connected to the source, or 1 if it belong to the component connected to the sink. Not all pseudo-Boolean functions can be represented by a flow network, and in the general case the global optimization problem is NP-hard. There exist sufficient conditions to characterise families of functions that can be optimised through graph cuts, such as submodular quadratic functions. Graph cut optimization can be extended to functions of discrete variables with a finite number of values, that can be approached with iterative algorithms with strong optimality properties, computing one graph cut at each iteration. Graph cut optimization is an important tool for inference over graphical models such as Markov random fields or conditional random fields, and it has applications in computer vision problems such as image segmentation, denoising, registration and stereo matching. == Representability == A pseudo-Boolean function f : { 0 , 1 } n → R {\displaystyle f:\{0,1\}^{n}\to \mathbb {R} } is said to be representable if there exists a graph G = ( V , E ) {\displaystyle G=(V,E)} with non-negative weights and with source and sink nodes s {\displaystyle s} and t {\displaystyle t} respectively, and there exists a set of nodes V 0 = { v 1 , … , v n } ⊂ V − { s , t } {\displaystyle V_{0}=\{v_{1},\dots ,v_{n}\}\subset V-\{s,t\}} such that, for each tuple of values ( x 1 , … , x n ) ∈ { 0 , 1 } n {\displaystyle (x_{1},\dots ,x_{n})\in \{0,1\}^{n}} assigned to the variables, f ( x 1 , … , x n ) {\displaystyle f(x_{1},\dots ,x_{n})} equals (up to a constant) the value of the flow determined by a minimum cut C = ( S , T ) {\displaystyle C=(S,T)} of the graph G {\displaystyle G} such that v i ∈ S {\displaystyle v_{i}\in S} if x i = 0 {\displaystyle x_{i}=0} and v i ∈ T {\displaystyle v_{i}\in T} if x i = 1 {\displaystyle x_{i}=1} . It is possible to classify pseudo-Boolean functions according to their order, determined by the maximum number of variables contributing to each single term. All first order functions, where each term depends upon at most one variable, are always representable. Quadratic functions f ( x ) = w 0 + ∑ i w i ( x i ) + ∑ i < j w i j ( x i , x j ) . {\displaystyle f(\mathbf {x} )=w_{0}+\sum _{i}w_{i}(x_{i})+\sum _{i 0 {\displaystyle p>0} then w i j k ( x i , x j , x k ) = w i j k ( 0 , 0 , 0 ) + p 1 ( x i − 1 ) + p 2 ( x j − 1 ) + p 3 ( x k − 1 ) + p 23 ( x j − 1 ) x k + p 31 x i ( x k − 1 ) + p 12 ( x i − 1 ) x j − p x i x j x k {\displaystyle w_{ijk}(x_{i},x_{j},x_{k})=w_{ijk}(0,0,0)+p_{1}(x_{i}-1)+p_{2}(x_{j}-1)+p_{3}(x_{k}-1)+p_{23}(x_{j}-1)x_{k}+p_{31}x_{i}(x_{k}-1)+p_{12}(x_{i}-1)x_{j}-px_{i}x_{j}x_{k}} with p 1 = w i j k ( 1 , 0 , 1 ) − w i j k ( 0 , 0 , 1 ) p 2 = w i j k ( 1 , 1 , 0 ) − w i j k ( 1 , 0 , 1 ) p 3 = w i j k ( 0 , 1 , 1 ) − w i j k ( 0 , 1 , 0 ) p 23 = w i j k ( 0 , 0 , 1 ) + w i j k ( 0 , 1 , 0 ) − w i j k ( 0 , 0 , 0 ) − w i j k ( 0 , 1 , 1 ) p 31 = w i j k ( 0 , 0 , 1 ) + w i j k ( 1 , 0 , 0 ) − w i j k ( 0 , 0 , 0 ) − w i j k ( 1 , 0 , 1 ) p 12 = w i j k ( 0 , 1 , 0 ) + w i j k ( 1 , 0 , 0 ) − w i j k ( 0 , 0 , 0 ) − w i j k ( 1 , 1 , 0 ) . {\displaystyle {\begin{aligned}p_{1}&=w_{ijk}(1,0,1)-w_{ijk}(0,0,1)\\p_{2}&=w_{ijk}(1,1,0)-w_{ijk}(1,0,1)\\p_{3}&=w_{ijk}(0,1,1)-w_{ijk}(0,1,0)\\p_{23}&=w_{ijk}(0,0,1)+w_{ijk}(0,1,0)-w_{ijk}(0,0,0)-w_{ijk}(0,1,1)\\p_{31}&=w_{ijk}(0,0,1)+w_{ijk}(1,0,0)-w_{ijk}(0,0,0)-w_{ijk}(1,0,1)\\p_{12}&=w_{ijk}(0,1,0)+w_{ijk}(1,0,0)-w_{ijk}(0,0,0)-w_{ijk}(1,1

  Read more →
• 

  Transfer learning

  Transfer learning (TL) is a technique in machine learning (ML) in which knowledge learned from a task is re-used in order to boost performance on a related task. For example, for image classification, knowledge gained while learning to recognize cars could be applied when trying to recognize trucks. This topic is related to the psychological literature on transfer of learning, although practical ties between the two fields are limited. Reusing or transferring information from previously learned tasks to new tasks has the potential to significantly improve learning efficiency. Since transfer learning makes use of training with multiple objective functions it is related to cost-sensitive machine learning and multi-objective optimization. == History == In 1976, Bozinovski and Fulgosi published a paper addressing transfer learning in neural network training. The paper gives a mathematical and geometrical model of the topic. In 1981, a report considered the application of transfer learning to a dataset of images representing letters of computer terminals, experimentally demonstrating positive and negative transfer learning. In 1992, Lorien Pratt formulated the discriminability-based transfer (DBT) algorithm. By 1998, the field had advanced to include multi-task learning, along with more formal theoretical foundations. Influential publications on transfer learning include the book Learning to Learn in 1998, a 2009 survey and a 2019 survey. Ng said in his NIPS 2016 tutorial that TL would become the next driver of machine learning commercial success after supervised learning. In the 2020 paper, "Rethinking Pre-Training and self-training", Zoph et al. reported that pre-training can hurt accuracy, and advocate self-training instead. == Definition == The definition of transfer learning is given in terms of domains and tasks. A domain D {\displaystyle {\mathcal {D}}} consists of: a feature space X {\displaystyle {\mathcal {X}}} and a marginal probability distribution P ( X ) {\displaystyle P(X)} , where X = { x 1 , . . . , x n } ∈ X {\displaystyle X=\{x_{1},...,x_{n}\}\in {\mathcal {X}}} . Given a specific domain, D = { X , P ( X ) } {\displaystyle {\mathcal {D}}=\{{\mathcal {X}},P(X)\}} , a task consists of two components: a label space Y {\displaystyle {\mathcal {Y}}} and an objective predictive function f : X → Y {\displaystyle f:{\mathcal {X}}\rightarrow {\mathcal {Y}}} . The function f {\displaystyle f} is used to predict the corresponding label f ( x ) {\displaystyle f(x)} of a new instance x {\displaystyle x} . This task, denoted by T = { Y , f ( x ) } {\displaystyle {\mathcal {T}}=\{{\mathcal {Y}},f(x)\}} , is learned from the training data consisting of pairs { x i , y i } {\displaystyle \{x_{i},y_{i}\}} , where x i ∈ X {\displaystyle x_{i}\in {\mathcal {X}}} and y i ∈ Y {\displaystyle y_{i}\in {\mathcal {Y}}} . Given a source domain D S {\displaystyle {\mathcal {D}}_{S}} and learning task T S {\displaystyle {\mathcal {T}}_{S}} , a target domain D T {\displaystyle {\mathcal {D}}_{T}} and learning task T T {\displaystyle {\mathcal {T}}_{T}} , where D S ≠ D T {\displaystyle {\mathcal {D}}_{S}\neq {\mathcal {D}}_{T}} , or T S ≠ T T {\displaystyle {\mathcal {T}}_{S}\neq {\mathcal {T}}_{T}} , transfer learning aims to help improve the learning of the target predictive function f T ( ⋅ ) {\displaystyle f_{T}(\cdot )} in D T {\displaystyle {\mathcal {D}}_{T}} using the knowledge in D S {\displaystyle {\mathcal {D}}_{S}} and T S {\displaystyle {\mathcal {T}}_{S}} . == Applications == Algorithms for transfer learning are available in Markov logic networks and Bayesian networks. Transfer learning has been applied to cancer subtype discovery, building utilization, general game playing, text classification, digit recognition, medical imaging and spam filtering. In 2020, it was discovered that, due to their similar physical natures, transfer learning is possible between electromyographic (EMG) signals from the muscles and classifying the behaviors of electroencephalographic (EEG) brainwaves, from the gesture recognition domain to the mental state recognition domain. It was noted that this relationship worked in both directions, showing that electroencephalographic can likewise be used to classify EMG. The experiments noted that the accuracy of neural networks and convolutional neural networks were improved through transfer learning both prior to any learning (compared to standard random weight distribution) and at the end of the learning process (asymptote). That is, results are improved by exposure to another domain. Moreover, the end-user of a pre-trained model can change the structure of fully-connected layers to improve performance.

  Read more →
• 

  Amália (LLM)

  Amália is a Portuguese large language model (LLM) announced in November 2024 by the Portuguese Prime-Minister Luís Montenegro. Its final version is expected to be launched in 2026. It is being developed by Center for Responsible AI (Centro para a AI Responsável) and by the research centers of NOVA School of Science and Technology and Instituto Superior Técnico. == History == In 2024 it was announced that the Portuguese Agency for Administrative Modernization (Agência para a Modernização Administrativa) transpose this LLM to Portuguese Public Administration. According to Paulo Dimas (CEO of the Center for Responsible AI) the three fundamental points of this LLM project are the linguistic variant (European Portuguese), cultural representation and data protection. In April 2025 it was announced that Amália had entered beta phase with an improved version being expected to be launched in September 2025. The beta version released in September is available only to the Public Administration, but the website launched in October reiterates the final version will be an open model.

  Read more →
• 

  Learning automaton

  A learning automaton is one type of machine learning algorithm studied since 1970s. Learning automata select their current action based on past experiences from the environment. It will fall into the range of reinforcement learning if the environment is stochastic and a Markov decision process (MDP) is used. == History == Research in learning automata can be traced back to the work of Michael Lvovitch Tsetlin in the early 1960s in the Soviet Union. Together with some colleagues, he published a collection of papers on how to use matrices to describe automata functions. Additionally, Tsetlin worked on reasonable and collective automata behaviour, and on automata games. Learning automata were also investigated by researches in the United States in the 1960s. However, the term learning automaton was not used until Narendra and Thathachar introduced it in a survey paper in 1974. == Definition == A learning automaton is an adaptive decision-making unit situated in a random environment that learns the optimal action through repeated interactions with its environment. The actions are chosen according to a specific probability distribution which is updated based on the environment response the automaton obtains by performing a particular action. With respect to the field of reinforcement learning, learning automata are characterized as policy iterators. In contrast to other reinforcement learners, policy iterators directly manipulate the policy π. Another example for policy iterators are evolutionary algorithms. Formally, Narendra and Thathachar define a stochastic automaton to consist of: a set X of possible inputs, a set Φ = { Φ1, ..., Φs } of possible internal states, a set α = { α1, ..., αr } of possible outputs, or actions, with r ≤ s, an initial state probability vector p(0) = ≪ p1(0), ..., ps(0) ≫, a computable function A which after each time step t generates p(t+1) from p(t), the current input, and the current state, and a function G: Φ → α which generates the output at each time step. In their paper, they investigate only stochastic automata with r = s and G being bijective, allowing them to confuse actions and states. The states of such an automaton correspond to the states of a "discrete-state discrete-parameter Markov process". At each time step t=0,1,2,3,..., the automaton reads an input from its environment, updates p(t) to p(t+1) by A, randomly chooses a successor state according to the probabilities p(t+1) and outputs the corresponding action. The automaton's environment, in turn, reads the action and sends the next input to the automaton. Frequently, the input set X = { 0,1 } is used, with 0 and 1 corresponding to a nonpenalty and a penalty response of the environment, respectively; in this case, the automaton should learn to minimize the number of penalty responses, and the feedback loop of automaton and environment is called a "P-model". More generally, a "Q-model" allows an arbitrary finite input set X, and an "S-model" uses the interval [0,1] of real numbers as X. A visualised demo/ Art Work of a single Learning Automaton had been developed by μSystems (microSystems) Research Group at Newcastle University. == Finite action-set learning automata == Finite action-set learning automata (FALA) are a class of learning automata for which the number of possible actions is finite or, in more mathematical terms, for which the size of the action-set is finite.

  Read more →
• 

  Inverse depth parametrization

  In computer vision, the inverse depth parametrization is a parametrization used in methods for 3D reconstruction from multiple images such as simultaneous localization and mapping (SLAM). Given a point p {\displaystyle \mathbf {p} } in 3D space observed by a monocular pinhole camera from multiple views, the inverse depth parametrization of the point's position is a 6D vector that encodes the optical centre of the camera c 0 {\displaystyle \mathbf {c} _{0}} when in first observed the point, and the position of the point along the ray passing through p {\displaystyle \mathbf {p} } and c 0 {\displaystyle \mathbf {c} _{0}} . Inverse depth parametrization generally improves numerical stability and allows to represent points with zero parallax. Moreover, the error associated to the observation of the point's position can be modelled with a Gaussian distribution when expressed in inverse depth. This is an important property required to apply methods, such as Kalman filters, that assume normality of the measurement error distribution. The major drawback is the larger memory consumption, since the dimensionality of the point's representation is doubled. == Definition == Given 3D point p = ( x , y , z ) {\displaystyle \mathbf {p} =(x,y,z)} with world coordinates in a reference frame ( e 1 , e 2 , e 3 ) {\displaystyle (e_{1},e_{2},e_{3})} , observed from different views, the inverse depth parametrization y {\displaystyle \mathbf {y} } of p {\displaystyle \mathbf {p} } is given by: y = ( x 0 , y 0 , z 0 , θ , ϕ , ρ ) {\displaystyle \mathbf {y} =(x_{0},y_{0},z_{0},\theta ,\phi ,\rho )} where the first five components encode the camera pose in the first observation of the point, being c 0 = ( x 0 , y 0 , z 0 ) {\displaystyle \mathbf {c_{0}} =(x_{0},y_{0},z_{0})} the optical centre, ϕ {\displaystyle \phi } the azimuth, θ {\displaystyle \theta } the elevation angle, and ρ = 1 ‖ p − c 0 ‖ {\displaystyle \rho ={\frac {1}{\left\Vert \mathbf {p} -\mathbf {c} _{0}\right\Vert }}} the inverse depth of p {\displaystyle p} at the first observation.

  Read more →
• 

  Lose It!

  Lose It! is an American health and wellness mobile app developed by FitNow, Inc. The app generates calorie budgets for users by tracking weight, exercise, food and calorie intake, and personal goals, primarily to assist them in achieving weight loss. == History == Lose It! was developed in Boston and debuted in 2008. The app and its associated company were founded by J.J. Allaire, Charles Teague and Paul Dicristina. Prior to founding Lose It!, Teague and Allaire had founded the online research tool Onfolio, which was acquired by Microsoft in 2006. The Lose It! app was originally released as an iOS app before being released as a website in 2010 and an Android app in 2011. In 2015, Lose It! announced plans to release the app internationally. Lose It! was also available as an app for Apple Watch at its launch in 2015. The app’s “Snap It” feature, which allows users to approximate calorie counts by taking pictures of their daily meals and snacks, was released in beta in 2016. Snap It was named an Innovation Awards Honoree at the 2017 Consumer Electronics Show in Las Vegas. In 2020, Patrick Wetherille, one of the company’s earliest employees, was appointed chief executive officer. == App == Lose It! is weight loss app. The app allows users to set goals such as increasing strength, overall health/maintenance, and weight loss. It provides users recommended calorie budgets based on data such as their current weight and their desired weight. Lose It! also tracks data such as exercise/activity level and food consumption and allows users to track calories consumed by scanning barcodes for food products then retrieving calorie information for products. The app can also estimate the amount of calories in a food products. Lose It! has integration features connecting it to other apps such as Fitbit and Runkeeper. It also has social features such as joining groups and sharing progress with friends. The Premium version of the app allows users to track foods according to specific diets like keto, heart healthy or Mediterranean.

  Read more →
• 

  Corpus of Linguistic Acceptability

  Corpus of Linguistic Acceptability (CoLA) is a dataset the primary purpose of which is to serve as a benchmark for evaluating the ability of artificial neural networks, including large language models, to judge the grammatical correctness of sentences. It consists of 10,657 English sentences from published linguistics literature that were manually labeled either as grammatical or ungrammatical. == Public version == The publicly available version of CoLA contains 9,594 sentences that belong to training and development sets. It excludes 1,063 sentences reserved for a held-out test set.

  Read more →
• 

  Business process automation

  Business process automation (BPA), also known as business automation, refers to the technology-enabled automation of business processes. == Development approaches == There are three main approaches to developing BPA: traditional business process automation involves developing BPA software in a programming language for integrating relevant applications in the digital ecosystem to execute a given process; robotic process automation uses software robots (also called agents, bots, or workers) to emulate human-computer interaction for executing a combination of processes, activities, transactions, and tasks in one or more unrelated software systems; hyperautomation (also called intelligent automation (IA), intelligent process automation (IPA), integrated automation platform (IAP), and cognitive automation (CA) combines business process automation, artificial intelligence (AI), and machine learning (ML) to discover, validate, and execute organizational processes automatically with no or minimal human intervention. == Deployment == BPA toolsets vary in capability. With the increasing adoption of artificial intelligence (AI), organizations are implementing AI-driven technologies that can process natural language, interpret unstructured datasets, and interact with users. These systems are designed to adapt to new types of problems with reduced reliance on human intervention. == Business process management implementation == A business process management system differs from BPA. However, it is possible to implement automation based on a BPM implementation. The methods to achieve this vary, from writing custom application code to using specialist BPA tools. == Robotic process automation == Robotic process automation (RPA) involves the deployment of attended or unattended software agents in an organization's environment. These software agents, or robots, are programmed to perform predefined structured and repetitive sets of business tasks or processes. Robotic process automation is designed to streamline workflows by delegating repetitive tasks to software agents, allowing human workers to focus on more complex and strategic activities. BPA providers typically focus on different industry sectors, but the underlying approach is generally similar in that they aim to provide the shortest route to automation by interacting with the user interface rather than modifying the application code or database behind it. == Use of artificial intelligence == Artificial intelligence software robots are used to handle unstructured data sets (like images, texts, audios) and are often deployed after implementing robotic process automation. They can, for instance, generate an automatic transcript from a video. The combination of automation and artificial intelligence (AI) enables autonomy for robots, along with the capability to perform cognitive tasks. At this stage, robots can learn and improve processes by analyzing and adapting them.

  Read more →
• 

  Dhammin

  Dhammin (Arabic: ضمّن) is a political platform that manages candidates' electoral campaigns for the National Assembly, Municipal Council or Cooperative Society councils of Kuwait. The platform was founded by Abdullah Al-Salloum and it is, according to news reports and interviews, the first within the field to apply distributed-systems' methodologies.

  Read more →
• 

  Computer vision dazzle

  Computer vision dazzle, also known as CV dazzle, dazzle makeup, or anti-surveillance makeup, is a type of camouflage used to hamper facial recognition software, inspired by dazzle camouflage used by vehicles such as ships and planes. == Methods == CV dazzle combines stylized makeup, asymmetric hair, and sometimes infrared lights built in to glasses or clothing to break up detectable facial patterns recognized by computer vision algorithms in much the same way that warships contrasted color and used sloping lines and curves to distort the structure of a vessel. It has been shown to be somewhat successful at defeating face detection software in common use, including that employed by Facebook. CV dazzle attempts to block detection by facial recognition technologies such as DeepFace "by creating an 'anti-face'". It uses occlusion, covering certain facial features; transformation, altering the shape or colour of parts of the face; and a combination of the two. Prominent artists employing this technique include Adam Harvey and Jillian Mayer. == Use in protests == Computer vision dazzle makeup has been used by protestors in several different protest movements. Its use as a protesting aid has often been found ineffective. It may be effective to thwart computer technology, but draws human attention, is easy for human monitors to spot on security cameras, and makes it hard for protestors to blend in within a crowd. Advances in facial recognition technology make dazzle makeup increasingly ineffective.

  Read more →